PINSETTER PARTS FOR GS MACHINES

Transcription

1 PINSETTER PARTS FOR GS MACHINES GS Pinsetter Series: GS-10, 92, 96, 98 & GSX

2 The Strike Maker brand was introduced in 1999 and has been a major supplier of parts that fit GS pinsetting machines in the German market as well as surrounding areas of Europe. The partnership between Kegel and Strike Maker will help to bring this proven line of German engineered parts to the United States. Kegel has always been a brand that focuses on quality products and innovative solutions for our customers; the Strike Maker team shares this vision. High Quality German Engineering Competitive Pricing Backed by a Two-Year Warranty Contents BALL LIFT... 3 ELEVATOR... 3 TRANSPORT BAND... 4 BALL CUSHION & PIT CURTAIN... 5 SWEEP WAGON... 5 ACCELERATOR... 6 SETTING TABLE... 7 DRIVE FRAME ASSEMBLIES MAIN FRAME DISTRIBUTOR ELECTRONICS SPECIAL PARTS + TOOLS HARDWARE DISTRIBUTORS... 14

3 BALL LIFT SM SM SM SM Rubber Track Leather Track Reset Switch and Bracket Assembly Urethane Ball Wheel Assembly SM SM Left Hand Exit Track Right Hand Exit Track ELEVATOR SM SM SM SM Pin Count Switch V-Belt (10 mm x 6 mm x 1900 mm) Large Nylon Track Wheel Master Link with Pin SM SM SM SM Round Belt Pulley Wedge Guide V-Belt Pulley Spacer SM SM SM SM Switch Assembly - Silver Box V-Belt Pulley Adapter Ejector Rubber Bumper 3

4 SM SM SM SM R.H. Front Pin Deflector L.H. Front Pin Deflector R.H. Rear Pin Deflector L.H. Rear Pin Deflector TRANSPORT BAND 4 SM SM SM SM V-Belt (10 mm x 6 mm x 2560 mm use with 110 mm pulley) V-Belt (10 mm x 6 mm x 2650 mm use with 125 mm pulley) Transport Band Carpet Heavy Duty Short Pit Transport Band Carpet Standard Short Pit SM SM SM SM End Cap with Bearing (2 Stud Front Roller Only) V-Belt Pulley Housing Compression Spring SM SM SM SM V-Belt Pulley 110 mm T-Band Frame Assembly (R.H.) T-Band Frame Assembly (L.H.) Polycord (15 mm) m Welded SM SM SM V-Belt Pulley 125 mm Drive Pulley Assembly Pivot Arm

5 BALL CUSHION & PIT CURTAIN SM SM SM SM Motor Mount (8 mm) Rubber Bumper (25 mm x 15 mm) Rubber Bumper (30 mm x 20 mm) Overflow Chute Clamp SM SM SM SM Black Impact Strip Pit Curtain Heavy Duty Overflow Sock Cap (Ball Cushion Assembly) SM SM SM SM L.H. (Odd) Ball Cushion Board with Facing R.H. (Even) Ball Cushion Board with Facing Bearing Ball Cushion Shock (Hydraulic) SWEEP WAGON SM SM SM SM Gutter Adapter Tipper Sweep Board Connector Joint SM SM SM SM Plastic Bearing Plastic Roller with Bushing Sweep Shock Assembly (Hydraulic) Rubber Bumper (Sweep) 5

6 ACCELERATOR 6 SM SM SM SM Flat Belt V-Belt (10 mm x 6 mm x 950 mm) V-Belt (10 mm x 6 mm x 925 mm) Ejot-Plastic Nuts 3.5 mm SM SM SM SM Ball Door Ball Door Key R.H. Ball Door Key L.H. Pivoting Lever SM SM SM SM Locking Bolt Lever-Ball Door Stop Tension Spring - Ball Door (Package of 10) Bushing

7 SETTING TABLE SM SM SM SM Chain Gear Pinion Gear - Iron Damper Only (Pin Holder) Toothed Rack (6 mm x 25 mm) SM SM SM SM Gear Gear Gear Gear SM SM SM SM Tension Spring Urethane Spotting Tong Damper (Package of 10) Connecting Link (Spotting Tong Assembly) Geared Rack SM SM SM SM Counter Weight Cherry Switch - Silver Box GS92 Pin Detector Plate Pin Holder w/ Dampers SM SM SM SM Holder Bearing Solenoid - Complete O-Ring for Plunger (Package of 10) 7

8 8 SM SM SM SM Double Microswitch (Pin Holder Assembly) GSX Pin Holder Assembly Complete GSX Pin Holder w/ Dampers Pin Gripper (GSX Pin Holder) SM SM SM SM GSX Switch Finger GSX Drive Gear GSX Switch Lever SM SM SM SM GSX Grip Ring Solenoid Spring (GSX Pin Holder) GSX Switch Button Lever SM SM SM SM Lever Lever Lever Lever SM SM SM SM Pin GSX Microswitch Clip Link Assembly - (GSX) GSX Solenoid Plunger SM SM SM SM Tension Spring (GSX Pin Holder) GSX Torsion Spring GSX Tension Spring Pivot Pin (Package of 10)

9 SM SM SM SM Tong (L.H.) Tong (R.H.) Wedge (Large) Wedge (Small) SM SM SM SM Spotting Tong Assembly 2,3,7,8,9,10 Spotting Tong Assembly 1,4,5,6 GSX Microswitch only GSX Microswitch SM SM SM SM Square Shaft Gear T-Stop (Table Rack and Roller Assembly) Table Chain Gear Assembly Lower Chain Gear w/ Bearing Block SM SM SM SM Rear Distributor Shaft Drive Pulley Setting Table Harness Solenoid - Silver Box GSX Solenoid Complete SM SM Solenoid only (Consolidated and Nexgen only) Threaded Cap 9

10 DRIVE FRAME ASSEMBLIES 10 SM SM SM SM Pivot Bearing Microswitch (Silver Box, Consolidated and Nexgen Electronic Box) Reed Switch Assembly (Silver Box, Consolidated and Nexgen Electronic Box) V-Belt (10 mm x 6 mm x 875 mm) SM SM SM SM V-Belt (10 mm x 6 mm x 1150 mm or 1160 mm) Latch Double Pulley Clevis SM SM P SM SM Rubber Bumper Plastic Pinion Gear Gear Assembly w/ Hub Pinion Shaft SM SM SM SM Sprocket Shaft Cam Spindle Gear Square Shaft Drive Gear SM SM SM Sweep Motor 1/4 HP Setting Table Motor 1/2 HP Shock Absorber (Setting Table)

11 MAIN FRAME SM SM Spur Gear (Position 1 and 2) Spur Gear (Position 3) DISTRIBUTOR SM SM SM SM Rubber Mount (Shark) V-Belt (8 mm x 13 mm x 1375 mm) Molex Terminal Female (Package of 10) Molex Terminal Male (Package of 10) SM SM SM SM Rear Distributor Shaft Drive Pulley Torsion Spring Right Hand (Pin 2, 4, 6, 8, 10) Torsion Spring Left Hand (Pin 1, 3, 5, 7, 9) Pin Stop SM SM SM SM Slider Mount Slider Assembly Complete Dowel Pin (3 mm x 15 mm) Round Belt Pulley SM SM SM SM Pin Station Housing Retaining Bow with Flap Retaining Bow without Flap Release Button 11

12 12 SM SM SM SM Shark Rail - R.H. Extension Rail Shark Rail - L.H. Extension Rail Guide (L.H.) Guide (R.H.) SM SM SM SM Ejector Flap (L.H.) Ejector Flap (R.H.) Cam Assembly (L.H. - Pin Stations 1, 5, 6) Cam Assembly (R.H. - Pin Stations 2, 3, 4, 8, 9) SM SM Ejector Actuating Lever Retaining Pin (Universal Pin Station) SM w/ Bushing SM SM w/o Bushing Ejector Tension Spring Square Spindle (Pin Station) SM SM SM SM Universal Pin Station (2, 3, 4, 8, 9) Universal Pin Station (1, 5, 6) Universal Pin Station (7, 10) Slide (Smart Shark) SM SM SM SM Fin Switch Release Lever (Universal) Bushing for Square Spindle 2 Piece Rear Distributor Gear SM SM SM Retaining Bow Extender Sleeve (Package of 6) Pin Shield (2, 3, 8, 9, 10) Distributor Station (7 Pin) Steel

13 ELECTRONICS SM SM SM SM Setting Table Cable Assembly Setting Table Cable (Consolidated Upper) Setting Table Cable Assembly (GSX Upper) Ball Detector Assembly SPECIAL PARTS + TOOLS SM-TOOL-002 SM-TOOL-005 Belt Welding Iron (120 VAC) Belt Welding Clamp HARDWARE SM SM SM SM SM SM SM SM SM Retaining Ring (12mm) Elevator Retaining Ring (17mm) Elevator Retaining Ring (20mm) Transport Band Retaining Ring (8mm) Square Shaft Retaining Ring (10mm) Setting Table Retaining Ring (25mm) Table Gear Retaining Ring (14mm) External Metric Retaining Ring (18mm) Retaining Ring (15mm) Sweep SM SM SM SM SM SM SM SM SM Key (8 X 7 X 45mm) Crank Key (5 X 5 X 32mm) Front Pulley Key (8 X 7 X 40mm) Sweep Key (8 X 7 X 32mm) Key (5 X 5 X 25mm) Upper Elevator Shaft Key (8 X 7 X 28mm) Chain Gear Key (8 X 7 X 30mm) Sprocket Shaft Key (6 X 6 X 20mm) Elevator Metric Key (M10 X 8 X 32mm) Table Gear 13

14 DISTRIBUTORS ACE MITCHELL BOWLERS MART 3365 Cavalier Trail Cuyahoga Falls, OH Contact: Jeff Mraz Phone: (800) ACE MITCHELL BOWLERS MART EAST 940 Grand Blvd. Deerpark, NY, Contact: Jeff Mraz Phone: (800) ACE MITCHELL NASHVILLE 7125 Cockrill Bend Blvd. Nashville, TN Contact: Kelly Rakow Phone: (800) ACE MITCHELL FLORIDA 400 Central Park Drive Sanford, FL Contact: Randy McMackin Phone: (800) BOBS BUSINESS - MN 1981 Old West Main Red Wing, MN Contact: Bruce Plein bruce@bobsbusiness.com Phone: (651) BOBS BUSINESS - IL 730 Thomas Drive Bensenville, IL Contact: Bruce Plein bruce@bobsbusiness.com Phone: (651) BOWLERS SUPPLY INC Pennsylvania Ave. York, PA Contact: Andy Brenneman andy@bowlerssupply.com Phone: (800) BUFFA DISTRIBUTION MONTREAL 6520 Rue Magloire St. Leonard, QC H1P-1N8 Canada Contact: Michel Martin michel@buffabowling.com Phone: (800) CLASSIC PRODUCTS - FT. WAYNE, IN 4617 Industrial Rd. Fort Wayne, IN Contact: Jimmy Land jland@classicproducts.com Phone: (800) CLASSIC PRODUCTS - GARLAND, TX 1035 Nicholson Rd Garland, Tx Contact: Jimmy Land jland@classicproducts.com Phone: (800) CLASSIC PRODUCTS - LARGO, FL th Avenue North Largo, FL Contact: Jimmy Land jland@classicproducts.com Phone: (800) CLASSIC PRODUCTS - AUBURN, WA 4810 D Street Northwest - STE 104 Auburn, WA Contact: Jimmy Land jland@classicproducts.com Phone: (800) NEWELL S BOWLING SUPPLY Zevo Dr. Unit A-12 Temucula, CA Contact: Joe Newell newellbowl@aol.com Phone: (800) SBI, SCHEMM BOWLING INC. 500 Interpane Lane Deerfield, WI Contact: Tom Schemm tom@schemm.com Phone: (888)

15 PINSETTER PARTS FOR GS MACHINES GS IS A REGISTERED TRADEMARK OF BRUNSWICK BOWLING PRODUCTS, LLC 15

16 PINSETTER PARTS FOR GS MACHINES GS Pinsetter Series: GS-10, 92, 96, 98 & GSX Toll Free (US Only): BOWL (2695) Fax: International: Longleaf Boulevard Lake Wales, FL USA 16