General Specifications

Transcription

1 General Specifications s SE14 Magnetic Flow Converter s SE100 DJ/EJ, SE200DJ/EJ and SE300DJ/EJ Magnetic Flow ube Solution to your profitability ADMAG SE is the Safe and Easy magnetic flowmeter which makes your job simple and effective. You will increase the productivity and profitability. he installation, operation, and maintenance are all safe and easy. ADMAG SE is equipped with a dual cavity housing providing ease of wiring while isolating the electronics from the environment. It is also prepared with AR or BRAIN communication as standard and its light weight makes installation easy. FEAURES n igh Reliability Based on Field Proven echnology Proven Construction ong erm Durability Compliance to World Market Requirements General Safety CE mark, C -ick mark Explosion Proof ISO Standard n igh Accuracy (0.5% of flow rate) n Easy Operation and Maintenance Parameter Setting with ouch Control Self Diagnostics ight Weight and Easy Installation Face to Face ength conform to ISO Standard (Flange ype) n Easily Visible Display he arge Visible CD Panel n Communication Capability AR or BRAIN as standard n Cost-effective Note :AR is a registered trademark of the AR Communication Foundation. SANDARD SPECIFICAIONS n Magnetic Flow Converter SE14 Note For models with no setting switches, a handheld terminal is necessary to set parameters. Pulse output, status output and alarm output use the commom terminals, therefore these functions are not used at the same time. Excitation method: Pulsed DC excitation Output Signal Current Output: 4 to 20 ma DC (oad resistance 600 ohm maximum.). ransistor Contact Output: Pulse, alarm or status output selected by parameter setting (Contact rating : 30V DC, 200mA) F0101.EPS Communication: AR or BRAIN (Superimposed on the 4 to 20mA DC signal) Conditions of Communication ine: oad Resistance: (including cable resistance) AR: 230 to 600 ohm, depending on q ty of field devices connected to the loop (multidrop mode) BRAIN: 250 to 600 ohm oad Capacitance: 0.22 µf maximum oad Inductance: 3.3 m maximum Space from Power ine: 15 cm(0.6 ft) or more (Parallel wiring should be avoided.) Input Impedance of Receiver Connected to the Receiving Resistance: 10k ohm or larger (at 2.4 kz) (only for AR) Maximum Cable ength: 2 km(6500 ft) (when polyethylene-insulated PVC-sheathed control cables (CEV cables) are used) Instantaneous Flow Rate Display Function: Flow rate can be displayed either in engineering units or in percent of span. (for models with indicator) otalizer Display Function: otalized volume in engineering units can be displayed by setting a totalizing factor. (for models with indicator) Span Setting Function: Volumetric flow setting is available by setting volume unit, time unit, flow rate value and flow tube size. Volume Unit: gallon(us), m 3, l, cm 3,barrel(= ) Velocity Unit: ft, m ime Unit: sec., min., hour, day Flow ube Size: inch, mm Yokogawa Electric Corporation , Nakacho, Musashino-shi, okyo, Japan el.: Fax.: Copyright Mar. 1998(YK) 5th Edition Jun. 1999(YK)

2 2 Data Security During Power Failure: Data storage in EEPROM - no back-up battery required. Damping ime Constant: Settable from 0.5 second to 200 seconds. (63% response time) Pulse Output Function: Scaled pulse can be output by setting a pulse factor. Pulse Width:Duty 50% or fixed pulse width (0.5, 1, 20, 33, 50, or 100ms) - user selectable. Output Rate : to 1000pps (when pulse output function is selected.) Status Output Function: One of the followings is selected by parameter setting. Auto 2 Ranges Status Output : Indicates the selected range for auto 2 ranges function. Forward and Reverse Status Output : Indicates the flow direction for forward and reverse flow measurement mode. otalization Status Output : Indicates that the internal totalized value exceedsthe set value. ow imit Alarm : Indicates that flow rate under the low limit set value. Alarm Output Function : Indicates that an alarm occurs (Normal Close Fixed). Self Diagnostics Function: Converter failure, flow tube failure, erroneous setting, etc. can be diagnosed and displayed (for models with indicator). ouch Control: Parameter setting operation by infrared switches. (for models with indicator and setting switches) Mounting: 2-inch pipe mounting. Electrical Connection: ANSI 1/2NP female, DIN Pg13.5 female, ISO M20 X 1.5 female, JIS G1/2 female. erminal Connection: M4 size screw terminal. Case Material: Aluminum alloy. Coating: Polyurethane corrosion-resistant coating. Deep sea moss green (Munsell 0.6GY3.1/2.0). Protection: IP67, NEMA 4X Magnetic Flow ube SE100DJ/EJ,SE200DJ/ EJ and 300DJ/EJ Protection : IP67, NEMA 4X Size in mm (inch): 15 (0.5"), 25 (1"), 40 (1.5"), 50 (2"), 80 (3"), 100 (4"), 150 (6"), 200 (8"), 250 (10"), 300 (14"), 350 (14"), 400 (16") Coating: erminal Box: Polyurethane corrosion-resistant coating, Deep sea moss green (Munsell 0.6Y3.1/2.0) erminal box is coated for all type Body: Polyurethane corrosion-resistant coating, Deep sea moss green (Munsell 0.6Y3.1/2.0) All sizes of carbon steel flange type 150 and 200 mm of wafer type No coating 15 to 100mm of stainless steel flange type 15 to 100mm of wafer type Flow ube Material: Size 15 to 100mm (0.5" to 4") ousing : Stainless steel (15mm:SCS11,25 to100mm :SUS304) Flange : Carbon steel (SS400) or stainless steel (SUS304) Pipe : Stainless steel (15 to 25mm:SCS13, 40 to 100mm: SUS304) erminal box: Aluminum alloy Size 150 to 400mm (6" to 16") ousing : Carbon steel (SPCC) Flange : Carbon steel (SS400) Pipe : Stainless steel (SUS304) erminal box: Aluminum alloy Wetted Part Material : ining : Elecctrode : Stainless steel (SUS316), astelloy C (equivalent to astelloy C-276) itanium, antalum, Platinum-Iridium, ungsten Carbide. Earth Ring : Size 15 to 200mm Stainless steel (SUS316), astelloy C (equivalent to astelloy C-276), itanium, PFA lining + Earth electrode*. *Earth Electrode: antalum, Platinum-Iridium. Size 250, 300mm Stainless steel (SUS316), astelloy C (equivalent to astelloy C-276), itanium Size 350, 400mm Stainless steel (SUS316) Electrode Construction: External insertion type. Electrical Connection: ANSI 1/2NP female, DIN Pg13.5 female, ISO M20 X 1.5 female, JIS G1/2 female. Note : astelloy is a registered trademark of aynes International Inc. All Rights Reserved. Copyright 1998, Yokogawa Electric Corporation 5th Edition Jun.01,

3 AZARDOUS AREA CASSIFICAION SE14 (Except 24V Power Supply version) CENEEC (KEMA) : AEX Directive No. KEMA 98AEX 3230 EEx d II C 6 ; Group II Category 2 G Electrode Circuit Um ; 250Vac/dc Excitation Circuit ; 41V max. 6/6.25z Enclosure ; IP67 SE100EJ and SE200EJ CENEEC (KEMA) : AEX Directive No. KEMA 98AEX 3230 EEx dm[ia] 6..3 ; Group II Category 2 G Electrode Circuit Um ; 250Vac/dc Excitation Circuit ; 41V max. 6/6.25z emp. Class ; Process emp. ; C Enclosure ; IP67 SANDARD PERFORMANCE SE100 DJ/EJ, SE200 DJ/EJ or SE300DJ/EJ + SE14 (Up to 300m cable length) Accuracy : Size in mm (inch) 15 to 400 (0.5 to 16) Span in m/s (ft/s) 0.3 to 1 (1 to 3) 1 to 10 (3 to 33) 0.5% of span Accuracy 0.25% of span (at indications below 50% of span) 0.5% of flow rate (at indications 50% of span or more) Repeatability: 0.1% of flowrate(minimum 1mm/s) Maximum Power Consumption: 11W Insulation Resistance: (SE14) 100Mohm between power terminals and ground terminal at 500V DC. 100Mohm between power terminals and each output terminal at 500V DC. 20Mohm between each output terminal (except for EX1 and EX2) and ground terminal at 100V DC. 20Mohm between (EX1 or EX2) and ground terminal at 50V DC. Withstand Voltage: (SE14) 1500V AC between power terminals and ground terminal for 1 minute. (for -A1/A2 power supply) 500V AC between power terminals and ground terminal for 1 minute. (for -D1 power supply) Safety Requirement Standard: 1EC1010 EMC Conformity Standard: EN55011 Class A, Group 1 EN AS/NZS 2064: EPS NORMA OPERAING CONDIION Ambient emperature: -20 to 60 C (-4 to 140 F) Ambient umidity: 5 to 95%R (no condensation) Rated Power Supply Voltage: 100VAC Version: 100/115VAC (Range 80 to 127VAC) 230VAC Version:200 to 240VAC (Range 180 to 264VAC) 24V DC/AC Version : (Range 20.4 to 28.8 V AC/DC) Power Supply Frequency for AC version: 47 to 63z Supplied Power and Cable ength for 24V DC version: Allowable cable length m(ft) 1000(3300) 900(2970) 800(2640) 700(2310) 600(1980) 500(1650) 400(1320) 300(990) 200(660) 100(330) (V) Cable cross section area: 1.25 mm 2 Cable cross section area: 2 mm 2 F01.EPS Fluid Conductivity: 5µS/cm or larger Measurable Flow Rate Range: SI Units (Size : mm, Flowrate : m 3 /h) Size MIN MAX , , , ,463 4,523 English Units (Size : inch, Flowrate : GPM) Size MIN MAX , , ,565 15,741 20, EPS All Rights Reserved. Copyright 1998, Yokogawa Electric Corporation 5th Edition Jun.01,

4 4 Fluid emperature and Pressure : Pressure MPa(kgf/cm 2 ){psi} 4(40){570} 2(20){285} 1(10){142} -0.1(-1){-14.2} -40 (-40) Size 15mm (0.5") to 50mm (2") Size 80mm (3") to 400mm (16") 0 (32) 40 (104) emperature C ( F) (212)(266) 160 (320) Fig02.EPS NOE: his limits show maximum allowable fluid pressure for Flow ube itself. Further fluid pressure should also be limitted according to flange rating. ACCESSORIES Magnetic flow converter: Data sheet 1 Unit labels 1 exagonal wrench (for special screw of erminal cover and Display cover.) 1 Mounting bracket 1 set Magnetic flow tube: Centering device 1 set (in case of wafer type) exagonal wrench (for special screw of erminal cover) 1 ERMINA CONNECION Magnetic flow converter: erminal Symbols PS/AM OU CUROU POWER SUPPY SA A B SB C EX1 EX2 P+ P- I+ I- /+ N/- G Magnetic flow tube : erminal Symbols A B C EX1 EX2 Description A shield Flow signal input B shield Common Excitation current output Pulse or alarm output Current output 4 to 20mA DC Power supply and Ground Protect earth Description Flow signal output Common Excitation current input Ground (Outside of the erminal box) 03.EPS 04.EPS All Rights Reserved. Copyright 1998, Yokogawa Electric Corporation 5th Edition Jun.01,

5 MODE AND SUFFIX CODE Magnetic Flow Converter: Suffix code Description SE14 Aux.Cod -J... Always J Output D... E... Indicator NN Power Supply -A1... -A2... -D1... Electrical Connection (Refer to Note1) Optional Codes /... Magnetic flow converter 4-20mA and Pulse or Alarm, simultaneous 2-output (BRAIN) 4-20mA and Pulse or Alarm, simultaneous 2-output (AR) Non Indicator With Indicator With Indicator and Setting SW 100V AC 230V AC 24V DC/AC JIS G1/2 female ANSI 1/2NP female DIN Pg 13.5 female ISO M20X1.5 female Note1 : For FM Explosion proof type, only ANSI 1/2NP electrical connection is selectable. For CENEEC Explosion proof type, JIS G1/2 electrical connection is not selectable. 05.EPS Optional Specification for SE14 Magnetic Flow Converter Item Paint color change Epoxy Coating Burnout Downward(Refer to Note2) DC Noise Suppression FM Approval (now preparing) CENEEC Certification AEX Directive (KEMA) (Except 24V Power Supply Version) CSA Certification (now preparing) Specification Munsell code; N1.5, black Munsell code; 7.5BG4/1.5, Jade Green Munsell code; Metallic Silver Coating is changed to Epoxy coating. he current output will go down (2.4mA DC or less) when CPU failure Eliminating DC Noise FM Explosion Proof/Nonincendive ype CENEEC Explosion Proof AEX Directive EEx diic 6 ; Group II Category 2 G CSA Explosion Proof /Nonincendive ype Code /P1 /P2 /P7 /X1 /C1 /EC /FF1/FN1 /KF2 /CF1/CN1 SAA Certification (now preparing) SAA Explosion Proof /SF1 Calibration Certificate ightning Protector Waterproof Gland Waterproof Gland with Union Joint evel 2: Declaration and Calibration Equipment ist evel 3: Declaration and Primary Standard ist evel 4: Declaration and YOKOGAWA Measuring Instruments Control System Built-in ightning Protector Waterproof glands are attached to all wiring ports. For JIS G1/2 only Waterproof glands (union joint) are attached to all wiring ports. For JIS G1/2 only /2 /3 /4 /A /ECG /ECU NOE 2: he standard type (without/c1) : Upward (21.6mA DC or more) 06.EPS All Rights Reserved. Copyright 1998, Yokogawa Electric Corporation 5th Edition Jun.01,

6 6 Magnetic Flow ube : SE100DJ/EJ and SE200DJ/EJ Suffix code Description SE115 SE202 SE204 SE205 SE208 SE210 SE215 SE220 Construction D E Nominal size 15mm (1/2") Nominal size 25mm (1") Nominal size 40mm (1 1/2") Nominal size 50mm (2") Nominal size 80mm (3") Nominal size 100mm (4") Nominal size 150mm (6") Nominal size 200mm (8") Remote ype for General Purpose Remote ype for Explosion Proof Aux. Code J Always J ining -A..... Process connection Electrode material Earth ring and earth electrode material Electrical connection (Refer to Note2) B1S B2S E1S E2S E4S K1S K2S A1C A2C D1C D2C D4C J1C J2C G1C A1S A2S D2S D4S J1S J2S G1S - -P - - -V -W N S P V Optional code / ANSI 150 Wafer ANSI 300 Wafer DIN PN10 Wafer DIN PN16 Wafer DIN PN40 Wafer JIS10K Wafer JIS20K Wafer ANSI 150 Flange only for 200mm only for 80 to 200mm only for 15 to 50mm Carbon steel (SS400) ANSI 300 Flange Carbon steel (SS400) DIN PN10 Flange Carbon steel (SS400), only for 200mm DIN PN16 Flange Carbon steel (SS400), only for 80 to 200mm DIN PN40 Flange Carbon steel (SS400), only for 15 to 50mm JIS 10K Flange Carbon steel (SS400) JIS 20K Flange Carbon steel (SS400) JIS F12 Flange Carbon steel (SS400), only for 80 to 200mm ANSI 150 Flange Stainless steel (SUS304), only for 15 to 100mm ANSI 300 Flange Stainless steel (SUS304), only for 15 to 100mm DIN PN16 Flange Stainless steel (SUS304), only for 80 to 100mm DIN PN40 Flange Stainless steel (SUS304), only for 15 to 50mm JIS 10K Flange Stainless steel (SUS304), only for 15 to 100mm JIS 20K Flange Stainless steel (SUS304), only for 15 to 100mm JIS F12 Flange Stainless steel (SUS304), only for 80, 100mm Stainless steel (SUS316) Platinum-iridium astelloy C-276 equivalent antalum itanium ungsten Carbide Non Earth Ring Stainless steel (SUS316) Platinum-iri dium electrode astelloyc-276 equivalent antalum electrode itanium JIS G1/2 female ANSI 1/2NP female DIN Pg13.5 female ISO M20X1.5 female (Refer to Note1) (Refer to Note1) (Refer to Note1) 07.EPS NOE 1: Select PN40 when requirment of PN10, PN16, PN25 for 15 to 50mm and select PN16 when requirment of PN10 for 80 to 150mm because of same mating dimensions. 2: For FM Explosion proof type, only ANSI 1/2 NP electrical connection is selectable. For CENEEC Explosion proof type, JIS G 1/2 electrical connection is not selectable. All Rights Reserved. Copyright 1998, Yokogawa Electric Corporation 5th Edition Jun.01,

7 Magnetic Flow ube : SE300DJ/EJ SE325 SE330 SE335 SE340 Suffix code Description Construction D E Nominal Size 250mm (10") Nominal Size 300mm (12") Nominal Size 350mm (14") Nominal Size 400mm (16") Remote ype for General Purpose Remote ype for Explosion Proof (Now preparing) Aux. Code J Always J ining -A..... Process J1C JIS 10K Flange connection J2C JIS 20K Flange A1C ANSI 150 Flange A2C ANSI 300 Flange D1C DIN PN10 Flange D2C DIN PN16 Flange G1C JIS F12 Flange Electrode material Stainless steel (SUS316) -P Platinum-iridium astelloy C equivalent antalum -V itanium -W ungsten Carbide Earth ring material N S V Electrical connection Optional code / JIS G1/2 female ANSI 1/2NP female DIN Pg13.5 female ISO M20X1.5 female Carbon steel (SS400) Carbon steel (SS400), only for size 250mm(10")and 300mm(12") Carbon steel (SS400) Carbon steel (SS400), only for size 250mm(10")and 300mm(12") Carbon steel (SS400) Carbon steel (SS400), only for size 250mm(10")and 300mm(12") Carbon steel (SS400) Non Earth Ring SUS316 astelloy C equivalent, only for size 250mm(10") and 300mm(12") itanium, only for size 250mm(10") and 300mm(12") 07-1.EPS All Rights Reserved. Copyright 1998, Yokogawa Electric Corporation 5th Edition Jun.01,

8 8 Optional Specification for s SE100DJ/EJ, SE200DJ/EJ and SE300DJ Magnetic Flow ube Item Stainless Steel Bolt & Nut Assembly Paint color change Epoxy Coating Oil-Prohibited use Material Certificate ydrostatic est Certificate FM Approval (only for size 15 to 200mm) (Now preparing) CENEEC Certification AEX Directive (KEMA) (only for size 15 to 200mm) SUS304 bolts/nuts and non-asbestos PFE-wrapped gaskets assembly for Wafer Munsell code; N1.5, Black Munsell code; 7.5BG4/1.5, Jade Green Specification Munsell code; Metallic Silver Coating is changed to Epoxy coating. Degreased cleansing treatment. Reproduced material certificate for pipe, electrode, earth ring, mini-flange (for wafer type) and flange (for flange type). (Refer to Note) est pressure depends on process connection. (est duration 10 minutes) FM Explosion proof CENEEC Explosion Proof AEX Directive EEx dm [ia] IIC ; Group II Category 2 G Code /BSF /P1 /P2 /P7 /X1 /K1 /M01 /01 /FF1 /KF2 CSA Certification (only for size 15 to 200mm) CSA Explosion Proof /CF1 (Now preparing) SAA Certification (only for size 15 to200mm) SAA Explosion Proof /SF1 (Now preparing) Calibration Certificate evel 2: Declaration and Calibration Equipment ist evel 3: Declaration and Primary Standard ist evel 4: Declaration and YOKOGAWA Measuring Instruments Control System /2 /3 /4 Gasket for PVC pipe Gaskets are attached between earth ring and flow tube. /FRG (only for size 15 to 200mm) Waterproof Gland Waterproof glands are attached to all wiring ports. For JIS G1/2 only om only. /ECG Waterproof Gland with Union Joint Waterproof glands (union joint) are attached to all wiring ports. /ECU For JIS G1/2 only. Note : In case of requirement of EN B for Material Certificate, contact YOKOGAWA office. 08.EPS Dedicated Signal Cable AM011 End treatment Suffix code *A /C Description Special cable for magnetic flowmeter Non termination erminated Cable length Enter the length in m (Max 300m) Style code Style A Optional Number of end treatment parts NOE : For Excitation, prepare two core cable at customer site. 09.EPS All Rights Reserved. Copyright 1998, Yokogawa Electric Corporation 5th Edition Jun.01,

9 EXERNA DIMENSIONS Magnetic Flow ube 15mm (0.5in) Wafer ype Unit : mm (inch) Ø86 (3.4) 48 (1.9) 20.5 (0.8) Ground erminal 111 (4.4) 80.5 (3.2) 68 (2.7) 268 (106) *1 When no earth ring is selected the face to face length is shorter by approx. 1.6mm (0.06in) 137 (5.4) 60.5 (2.4) Ø44 (1.7) he face to face length is longer by approx. 22mm (0.87in) for earth ring. (P,) 60 (2.4)*1 25mm (1in) to 100mm (4in) Wafer ype 60 (2.4) Weight 1.45 kg (3.2 lb) SD1d.eps Ø86 (3.4) 48 (1.9) 68 (2.7) 20.5 (8.1) Ground erminal (M4) 111 (4.4) *1 When no earth ring is selected the face to face length is shorter by approx. 1.6mm (0.06in) he face to face length is longer by approx. 22mm (0.87in) for earth ring. (P,) (3.2) (ØD) 150mm (6in), 200mm (8in) Wafer ype ØD Nominal Size ining Face to face length *1 Outside diameter eight Weight kg (lb) Unit : mm (Approx. inch) SE202DJ SE204DJ SE205DJ SE208DJ SE210DJ SE202EJ SE204EJ SE205EJ SE208EJ SE210EJ 25 (1) 40 (1.5) 50 (2) 80 (3) 100 (4) 60 (2.4) 70 (2.8) 80 (3.1) 120 (4.7) 150 (5.9) ØD 67.5 (2.7) 86 (3.4) 99 (3.9) 129 (5.1) 155 (6.1) 215 (8.5) 235 (9.3) 260 (10.2) 282 (11.1) 313 (12.3) 1 84 (3.3) 104 (4.1) 129 (5.1) 151 (5.9) 182 (7.2) 1.75 (3.8) 1.95(4.2) 2.4 (5.0) 4.8(10.0) 6.8 (14.9) SD2d.eps ø86 (3.4) 48(1.9) 20.5 (8.1) Ground erminal (M4) 111 (4.4) *1 When no earth ring is selected the face to face length is shorter by approx. 2mm (0.08in) (3.2) 68(2.7) () he face to face length is longer by approx. 32mm (1.3) in for earth ring. (P,) Nominal Size ining eight 1 Unit : mm (Approx. inch) SE215DJ SE215EJ SE220DJ SE220EJ (6) (8) (14.9) (16.9) (9.8) (11.7) Outside diameter Face to face length *1 Weight kg (8.6) (10.6) (7.9) (9.8) (lb) (31.4) (49.3) SD3d.eps All Rights Reserved. Copyright 1998, Yokogawa Electric Corporation 5th Edition Jun.01,

10 10 15mm (0.5in) Flange ype Unit : mm (inch) ø86 (3.4) 48 (1.9) 20.5 (0.8) Ground erminal (M4) 111 (4.4) *1 When no earth ring is selected the face to face length is shorter by approx. 1.6mm (0.06in) he face to face length is longer by approx. 22mm (0.87in) for earth ring. (P,) 137 (5.4) 80.5 (3.2) 60.5 (2.4) 68 (2.7) 268 (10.6) øc 4-øh Nominal size Flange ype ining Face to face length *1 Flange outside dia hickness (Except P.) hickness (P.) Pitch circle dia. Dia. of holes Weight kg (lb) øc øh Unit : mm (Approx. inch) SE115DJ, SE115EJ 15 (0.5) JI J2 A1 A2 D4 200 (7.9) (11.0) (11.0) (11.0) (11.0) (11.0) (11.0) (11.0) (11.0) (11.0) (11.0) 26.8 (11.0) 28.8 (11.0) 26 (11.0) 29 (11.0) 30.8 (11.0) (11.0) (11.0) (11.0) (11.0) (11.0) (11.0) (11.0) (11.0) (11.0) (11.0) (6.6) (7.0) (5.9) (6.9) (5.8) SD4d.eps 25mm (1in) to 50mm (2in) Flange ype Ø86 (3.4) 48 (3.2) 20.5 (0.8) Ground ermimal 111 (4.4) 80.5 (3.2) 2 68 (2.7) *1 When no earth ring is selected the face to face length is shorter by approx. 1.6mm (0.06in) 1 ØD he face to face length is longer by approx. 22mm (0.87in) for earth ring. (P,) ØC N-Øh Nominal Size Flange ype JI SE202DJ,SE202EJ J2 25 (1) A1 A2 D4 SE204DJ,SE204EJ 40 (1.5) JI J2 A1 A2 D4 SE205DJ,SE205EJ 50 (2) JI J2 A1 A2 D4 ining (9.6) (9.3) (9.6) (9.6) (10.3) (10.1)(10.6)(10.5) (13.0) (11.3)(11.5)(11.5) eight (4.4) (4.1) (4.4) (4.3) (5.2) (4.9) (5.5) (5.4) (6.2) (6.1) (6.4) (6.4) 2 51 (2.0) 61 (2.4) 80 (3.1) Face to face length *1 200 (7.9) 200 (7.9) 200 (7.9) Flange outside dia. ØD (4.9) (4.3) (4.9) (4.5) (5.5) (5.0) (6.1) (5.9) (6.1) (6.0) (6.5) (6.5) Pitch circle dia. ØC 90 (3.5) (3.1) (3.5) (3.3) (4.1) (3.9) (4.5) (4.3) (4.7) (4.8) (5.0) (4.9) hickness (Except P,) (0.7) (0.7) (0.7) (0.8) (0.8) (0.7) (0.8) (0.8) (0.9) (0.8) (0.7) (0.8) (0.9) (1.0) (0.9) hickness (P,) (1.1) (1.1) (1.1) (1.2) (1.3) (1.1) (1.3) (1.2) (1.4) (1.3) (1.1) (1.3) (1.3) (1.4) (1.3) Dia. of holes Øh (0.7) (0.6) (0.8) (0.6) (0.7) (0.6) (0.9) (0.7) (0.7) (0.7) (0.7) (0.7) Number of holes N Weight kg (lb) (8.9) (9.8) (7.6) (10.2) (9.8) (12.7)(13.3)(11.8)(16.8)(16.2)(15.7)(15.9)(16.8)(20.4)(20.0) Unit : mm (Approx, inch) SD5d.EPS All Rights Reserved. Copyright 1998, Yokogawa Electric Corporation 5th Edition Jun.01,

11 5 ØD 11 80mm (3in), 100mm (4in) Flange ype Unit : mm (inch) ø86(3.4) 48(1.9) 20.5(0.8) Ground erminal (M4) 111(4.4) (3.2) 2 68(2.7) N-øh *1 When no earth ring is selected the face to face length is shorter by approx. 1.6mm (0.06 in) he face to face length is longer by approx. 22mm (0.87in) for earth ring. (P,) Nominal Size SE208DJ, SE208EJ 80 (3) SE210DJ, SE210EJ 100 (4) Flange ype J1 J2 A1 A2 D2 G1 J1 J2 A1 A2 D2 G1 ining (12.2)(12.5)(12.3)(12.7)(12.5)(12.7)(13.4)(13.7)(13.8)(14.3)(13.6)(14.1) eight (7.0) (7.4) (7.2) (7.6) (7.4) (7.5) (8.3) (8.5) (8.6) (9.1) (8.5) (8.8) 2 92 (3.6) 105 (4.1) Face to face length *1 200 (7.9) 250 (9.8) Flange outside dia (7.3) (7.9) (7.5) (8.3) (7.9) (8.3) (8.3) (8.6) (9.0) (1.0) (8.7) (9.4) Pitch circle dia. øc (5.9) (6.3) (6.0) (6.6) (6.3) (6.6) (6.9) (7.3) (7.5) (7.9) (7.1) (7.7) hickness (Except P,) (0.9) (1.0) (1.1) (1.3) (0.9) (0.9) (5.9) (1.1) (1.1) (1.4) (0.9) (0.9) hickness (P, ) (1.3) (1.4) (1.5) (1.7) (1.4) (1.3) (1.3) (1.5) (1.5) (1.8) (1.4) (1.3) Dia. of holes øh (0.7) (0.9) (0.8) (0.9) (0.7) (0.7) (0.7) (0.9) (0.8) (0.9) (0.7) (0.7) Number of holes N Weight kg (lb) (21.7)(30.2)(31.8)(34.7)(25.8)(26.8)(26.1)(34.6)(36.2)(50.6)(30.2)(53.2) Unit : mm (Approx. inch) SD6d.eps 150mm (6in), 200mm (8in) Flange ype 86 (3.4) 48 (1.9) 20.5 (0.8) Ground erminal 111 (4.4) (3.2) 68(2.7) *1 When no earth ring is selected the face to face length is shorter by approx. 2mm (0.08in) ØC he face to face length is longer by approx. 32mm (1.3) in for earth ring. (P,) N-Øh Nominal Size SE215DJ, SE215EJ 150 (6) SE220DJ, SE220EJ 200 (8) Flange ype J1 J2 A1 A2 D2 G1 J1 J2 A1 A2 D1 D2 G1 ining Face to face length (ISO) *1 300 (11.8) 350 (13.8) (16.1)(16.6)(16.1)(16.9)(16.2)(16.3)(18.1)(18.5) (18.4) (19.1) (18.3) (18.3) (18.3) eight (11.0) (11.5)(11.0)(11.7)(11.1)(11.2)(12.6)(13.3) (13.2) (14.0) (13.1)(13.1)(13.2) (5.5) (6.5) Outside diameter Pitch circle dia ØD (11.0)(12.0)(11.0)(14.8)(11.2)(11.0)(13.0) (13.8) (13.5) (15.0) (13.4) (13.4)(13.5) ØC (9.4) (10.2)(9.5) (10.6)(9.4) (9.7) (1.1) (12.0) (11.7) (13.0) (11.6) (11.6)(11.8) hickness (Except P,) hickness (P,) (1.1) (1.3) (1.2) (1.6) (1.1) (1.1) (1.1) (1.4) (1.9) (1.8) (1.1) (1.1) (1.1) (1.7) (1.9) (1.8) (2.3) (1.7) (1.7) (1.7) (2.0) (2.1) (2.4) (1.8) (1.8) (1.8) Dia. of holes Øh 19 (0.9) (1.0) (0.9) (0.9) (0.9) (0.7) (0.9) (1.0) (0.9) (1.0) (0.9) (0.9) (0.7) Number of holes N Weight kg (lb) (57.6)(73.1) (62) (95.1)(62.0)(59.9)(81.9)(103.9)(96.9) (145.8)(90.7)(92.9)(95.2) Unit : mm (Approx : inch) SD7d.eps All Rights Reserved. Copyright 1998, Yokogawa Electric Corporation 5th Edition Jun.01,

12 12 Magnetic Flow Converter (1.2) (1.2) 230 (9.1) 160 (6.3) 40 (1.6) 170 (6.7) 102(4.02) Unit : mm (inch) 250mm (10in), 300mm (12in), 350mm (14in), 400mm (16in) Flange ype ø 86(3.4) Eye Bolt 1 111(4.4) 50.5(2) 48(1.9) 1 ( ) Ground erminal (M4) (5.2) 123 (4.8) 51 (2.0) 48 (1.9) 240 (9.5) Weight 2.8kg (6.16 lb) SD9d.eps ød 111(4.4) øc(p.c.d.) *1 When no earth ring is selected the face to face length is shorter by approx. 26mm (1.02 inch) for 250mm(10 inch), 6mm (0.23 inch) for 300mm (12 inch), 10mm (0.4 inch) for 350mm (14 inch) and 400mm (16 inch). N- øh SD8d.eps Nominal Size Flange ype A1C A2C D1C SE (10) D2C G1C J1C J2C Unit : mm (approx : inch) ining (20.6) (21.3) (20.3) (20.5) (20.6) (20.4) (21) (23) (23.7) (22.3) (22.5) (22.6) (22.3) (22.9) (24.8) (24.3) (24.8) (24) (27.2) (26.5) (26.8) (26.4) eight 1 (18.1) (19.6) (17.7) (18.1) (18.3) (17.8) (19.1) (21) (22.6) (19.6) (20.2) (20.4) (19.6) (21) (23.5) (22.4) (23.4) (21.8) (26) (24.7) (25.4) (24.5) (8.1) (8.9) (7.9) (8.1) (8.2) (8.0) (8.6) (9.6) (10.3) (8.9) (9.2) (9.3) (8.9) (9.6) (10.6) (10.1) (10.6) (9.8) (11.9) (11.2) (11.6) (11.1) Eye bolt SIZE/ød M12 / 30 M12 / 30 M16 / 35 M16 / 35 Face to face length (ISO)* (17.7) (20) (21.7) (23.6) Outside diameter D (16) (17.5) (15.5) (16) (16.1) (15.7) (20) (17.5) (18) (18.2) (17.5) (21) 505 (19.9) 530 (20.8) (19.2) (23.5) 565 (22.2) 582 (22.9) 560 (22) (16.9) (19) (18.9) hickness (1.9) (2.6) (1.7) (1.7) (1.7) (1.7) (2) (1.6) (2.3) (1.3) (1.4) (1.3) (1.3) (1.7) (1.8) (1.3) (1.4) (1.4) (1.8) (1.3) (1.4) (1.5) Pitch circle dia. C (14.2) (14) (14) (16.3) (18.7) 460 (18.1) (18.6) (17.5) (21.2) (20.3) (20.6) (20.1) (15.2) (13.8) (14.2) (15) (17) (18) (16) (16) (15.7) (16.9) Dia. of holes øh (1) (1.1) (0.9) (1) (0.9) (1) (1.1) (1) (1.2) (0.9) (1) (0.9) (1) (1.1) (1.2) (0.9) (1) (1) (1.1) (1) (1) (1.1) Number of holes N Weight kg (lb) (167.6) (178.6) (154.4) (156.6) (154.4) (154.4) (161) (211.7) (229.3) (191.8) (194) (191.8) (191.8) (200.7) (271.2) (235.9) (235.9) (235.9) (348.4) (297.7) (297.7) (297.7) SE (12) A1C A2C D1C D2C G1C J1C J2C SE (14) A1C D1C G1C J1C SE (16) A1C D1C G1C J1C SD8d-1.eps All Rights Reserved. Copyright 1998, Yokogawa Electric Corporation 5th Edition Jun.01,

13 13 SIZING DAA SI Units Size: mm Flow velocity m/s ,000 10,000 Flowrate (m3/h) English Units Size (inch) Flow velocity (ft/s) ,000 10,000 Flowrate (GPM) F04.EPS === ORDERING INFORMAION === 1., specification and optional codes. 2.Fluid name. 3.Parameter setting. (Only when necessary) (1) Flow rate span (at 100% output) Example: Volume/time unit (2) otalizing pulse units Example: Volume/Pulse, Pulse/time unit (3) ransmission pulse units Example: Volume/Pulse, Pulse/time unit 4.ag number (16 characters maximum). ( Only when necessary in Name Plate) === REAED INSRUMENS === Related Products Calibrator for magnetic flow converter (AM012) GS 1E6K2-E B200 Brain erminal GS 1C0A11-E All Rights Reserved. Copyright 1998, Yokogawa Electric Corporation