Molded Case Circuit Breakers Section 3 Q-Line Circuit Breakers

Transcription

1 Molded Case Circuit Breakers Section 3 QLine Circuit Breakers Cablein Cableout (luglug) 240V Class TQD 240 Vac, Internal Common Trip # of Ampere 240 Vac Price Poles Rating Interrupting Rating Product Number 1,2 GO135F 2 0 ka TQD0WL $ ka TQD125WL $ ka TQD150WL $ ka TQD175WL $ ka TQD200WL $ ka TQD5WL $ ka TQD320WL $ ka TQD32125WL $ ka TQD32150WL $ ka TQD32175WL $ ka TQD300WL $ ka TQD325WL $ TJD432300WL TQD 240 Vac, Internal Common Trip with Factory Installed 120 Vac Shunt Trip 3 # of Ampere 240 Vac Price Poles Rating Interrupting Rating Product Number 1,2 GO135F ka TQD32125ST1 $ ka TQD32150ST1 $ ka TQD32175ST1 $ ka TQD300ST1 $7 3 5 ka TQD325ST1 $7 THQD 240 Vac, Internal Common Trip # of Ampere 240 Vac Price Poles Rating Interrupting Rating Product Number 1,2 GO135F 2 0 ka THQD0WL $ ka THQD125WL $ ka THQD150WL $ ka THQD175WL $ ka THQD200WL $ ka THQD5WL $ ka THQD320WL $ ka THQD32125WL $ ka THQD32150WL $ ka THQD32175WL $ ka THQD300WL $ ka THQD325WL $ TJD 240 Vac, Internal Common Trip # of Ampere 240 Vac Price Poles Rating Interrupting Rating Product Number 1,2 GO135LGJ ka TJD4250WL $ ka TJD4300WL $ ka TJD4350WL $ ka TJD4400WL $ Molded Case Switch ka TJD4Y400 $ ka TJD4350WL 4 $ ka TJD432300WL 4 $ ka TJD432350WL 4 $ ka TJD432400WL 4 $ Molded Case Switch ka TJD432Y400 4 $ Refer to table on page 35 for lug and wire range data. 2 Includes line and load lugs. For optional configurations see page For additional shunt trip options see page TJD uses same accessories as J600 line. TJD not listed HACR. UL listed HACR (heating, air conditioning and refrigeration) Rev. 1/08

2 Molded Case Circuit Breakers Industrial Circuit Breakers Section 3 TriBreak Line Integrally Fused Thermal Magnetic Circuit Breakers Integrally Fused Magnetic Circuit Breakers Integrally Fused Molded Case Switches These breakers are available in three types. Type TB1 (150 amperes) product numbers include frame, trip, line and load lugs, and current limiters all factory assembled. TB6 (300 to 600 amperes) and TB8 (600 to 800 amperes) include frame, trip and limiters, factory assembled, but do not include line or load lugs. If line and load lugs are required, order separately. Unless otherwise noted, TB1, TB6, and TB8 breaker components are UL listed in File E 463. Fused molded case switches are UL listed in File E MagBreak Line Magnetic only circuit breakers (motor circuit protectors) These breakers are available only with noninterchangeable adjustable magnetic trip, in frame Types E, F, J, K, and TriBreak. All breakers are shipped factory assembled, complete with Cu/Al line and load lugs. All magnetic only circuit breakers and limiters are UL Component Recognized in Files E and E 66390, respectively, unless otherwise noted. Spectra RMS Circuit Breakers Determine the required breaker frame, IC rating, and load requirements. Select frame, trip unit (rating plug), and lug, if required, product numbers from the tables on pages 346 to 354. For Spectra breakers with MicroVersaTrip Plus or MicroVersaTrip PM Trip Units refer to pages 357 through 365. Select fieldmounted internal accessory product numbers, if required, on pages 370 and 371. Select fieldmounted external accessory product numbers, if required, on pages 397 through 37 and pages 366 to 369 for Spectra breakers with MicroVersaTrip Plus or MicroVersaTrip PM Trip Units. Order as separate items. MagBreak Motor Circuit Protectors Determine the required frame and ampere requirements. Select frame, trip unit (rating plug), and lug, if required, product numbers from the table on pages 373 through 375. Select accessories as noted above for circuit breakers. The same accessories are used with both circuit breakers and motor circuit protectors. Order as separate items. Molded Case Switches Determine the required frame and ampere requirements. Select frame and lug, if required, product numbers from the table on page 372. Rating plugs are not used. Select accessories as noted above for circuit breakers. Internal accessories do not require dummy trips. The same accessories are used with both circuit breakers and molded case switches. Order as separate items. Unless otherwise noted, all circuit breakers are UL listed in File E Molded case switches are UL listed in File E FieldInstallable Internal Accessories are UL listed in File E Distribution Cable Accessories for MicroVersaTrip Plus Trip Units and MicroVersaTrip PM Trip Units are UL listed in File E Accessories Order accessories from the appropriate table: Thermal Magnetic Circuit Breakers, Magnetic Circuit Breakers, and Molded Case Switches 1 pages 339 to 345 and 397 to 37. Spectra RMS Breakerspages 370 to 371 and 397 to 37. Spectra RMS Breakers with MicroVersaTrip Plus Trip Units or MicroVersaTrip PM Trip Unitspages 366 to 371, and 396 to Installation of accessories in molded case switches requires dummy trip; see page 345 for information. Dummy trip not required for TriBreak or QLine molded case switches. Molded Case Circuit Breaker and Switch Terminal Configuration Code Order standard Cu/Al lugs by using suffix codes presented. Order lugs separately if special lugs are required. For optional lugs, see pages 31 and 32. Breaker/Switch Type TQD/TJD Molded Case Breakers, Thermal Magnetic Molded Case Switch Spectra RMS Breakers Mine Duty Breakers MagBreak Breakers Blank WL XL X2 LL Suffix Line Lugs Line Lugs Order Lugs Separately Order Lugs Separately Publications and Reference: See Section for a complete list of additional productrelated publications Rev. 1/

3 Molded Case Circuit Breakers Section 3 Quick Reference Guide Ratings do not apply to molded case switches. The interruption ratings and voltages shown in the table are maximum ratings. A circuit breaker of the type given in the lefthand column may be applied at the given circuit voltage in any electrical distribution system where the available fault current at the load terminals of the breaker does not exceed the value in the table. That circuit breaker type may also be applied at intermediate values of circuit voltage provided the available fault current at the load terminals of the breaker does not exceed the value in the table for the higher value of voltage. THQL QLine (UL file E11592; Fixed Thermal Magnetic Trip Unit) Circuit Breaker Type ac dc H W D A B C E /4 TQ 3 2 3/ / /2 0 THQP /32 2 3/ TQL/TQB/ TQC THQL 1 THQB 1 THQC /32 2 3/ / / THHQB / /8 25 THHQC THHQL / / TXQL 1 TXQB 1 TXQC / / TQDL / /8 12 THQDL / / /4 1 TQD /16 4 1/8 2 5/8 2 7/16 2 7/16 11/16 27/32 1 THQD 1 Ampere Rating 1530 No. Poles Maximum Voltage Rating UL ed Interrupting Ratings rms Symmetrical ka Vac Vdc Dimensions (in.) / /16 4 1/8 2 5/8 2 7/16 2 7/16 11/16 27/ TJD /8 8 1/4 3 13/ / /16 1 3/8 1 3/ CB3 Ground Fault, Equipment Ground Fault and Arc Fault (UL File E575; Fixed Thermal Magnetic Trip Unit) THQB THQC THQL...GF, GFEP, AF THHQL...GF THHQB...GF AF /32 2 3/ / /8 1 UL listed as HACR (heating, air conditioning and refrigeration). 2 Not UL listed. Std. Pack Publications and Reference: See Section for a complete list of additional productrelated publications Rev. 1/

4 GE Service Entrance Equipment PowerMark Gold

5 GE Service Entrance Equipment Q Line Plugin Circuit Breakers UL ed (Molded Case Circuit Breakers No. 489) Federal Government Specification Qualified (WC375B) 60 C/75 C Conductor Rating QuickMake, QuickBreak Box Type Terminals III! THQP130 Cu Al THQL THHQL TXQL /0 /0 TQDL THQDL /0250 THQP THQL2140 THQL32015 /0 1/0250 TQDL21200,OOOAIC TYPE THQL 1inch Module Vac /0 Solid or stranded for 14 AWG THQP230 THQL1120 TYPE THQP 1 /2inch Module Ampere Rating Wire Size AWG/kcmil Ampere Rating Breaker Type Vac GO138A $ THQL1115 THQL1120 THQL1125 THQL1130 THQL1135 THQL1140 THQL1145 THQL V ac GO138A.000AIC AIC TYPE THHQL 1inch Module TYPE TXQL 1inch Module 240V ac Vac GO138 GO138A $ Vac GO138 TXQL1115 TXQL1120 TXQL1125 TXQL1130 GO138A Singlepole THQP115 THQP120 THQP125 THQP130 THQP135 THQP140 THQP145 THQP150 $ THHQL1115 THHQL1120 THHQL1125 THHQL1130 THHQL1135 THHQL1140 THHQL1145 THHQL cartons of cartons of 20 5 cartons of $ cartons of Twopole : Incorporates Internal Common Trip Bar THQL2115 THQL2120.THQL2125 THQL2130 THQL2135 THQL2140 THQL2145 THQL2150 THQL THQL THQL THHQL THHQL THQL2180 THQL2190 THQL THQL080 THQL090 THQL THHQL2180 THHQL2190 THHQL THHQL080 THHQL090 THHQL THQL211 THQL THHQL211 THHQL THQP215 THQP0 THQP5 THQP230 THQP235 THQP240 THQP245 THQP250 5 cartons of 1 0 THQL015 THQL020 THQL025 THQL030 THQL035 THQL040 THQL045 THQL050 THQL060 TQDL21125 TQDL21150 TQDL21175 TQDL21200 THHQL2115 THHQL2120 THHQL2125. THHQL2130 THHQL2135 THHQL2140 THHQL2145 THHQL2150 THHQL2160 $ ' THHQL015 THHQL020 THHQL025 THHQL030 THHQL035 THHQL040 THHQL045 THHQL050 THHQL060 $ TXQL2115 TXQL2120 TXQL2125 TXQL2130 THQDL21125 THQDL21150 THQDL21175 THQDL cartons of 1 cartons of 1 Threepoled): Incorporates Internal Common Trip Bar THQL32015 THQL32020 THQL32025 THQL32030 THQL32035 THQL32040 THQL32045 THQL32050 THQL32060 THQL THQL32080 THQL32090 THQL UL ed as HACR (heating, air conditioning and refrigeration). UL ed as SWD (switching duty). Suitable for 120 volts ac fluorescent lighting loads. TXQL32015 TXQL32020 TXQL32025 TXQL THHQL THHQL32080 THHQL32090 THHQL cartons of 3 THHQL32015 THHQL32020 THHQL32025 THHQL32030 THHQL32035 THHQL32040 THHQL32045 THHQL32050 THHQL cartons of amp UL ed as HACR (heating, air conditioning and refrigeration). Requires four oneinch spaces. GO Issue 5 cartons of 3 References: Accessories P a g e s thru 113 Auxiliary Switches.. BuyLog pages & Shunt T r i p s thru

6 Panelboards ASeries Panelboards Types Section 9 Panelboard Types Item Max. Voltage AL Pg. 917 AQ Pg. 926 ASeries AE Pg. 935 Lighting AD/AD Plus Control Panel Pg. 948 Pg. 955 ALC Pg. 966 Column Type Panels AQC Pg. 970 AEC Pg. 974 Distribution Panels Spectra Pg Vac 240Vac 480Y/277Vac 1 600Vac 480Y/277Vac 240Vac 240Vac 480/277Vac 600Vac 125/250Vdc 125/250Vdc 250Vdc Max. Main Lug Amperes 800A 800A 800A 800A 400A 1200A Max. Main Breaker or Switch Amperes 800A 800A 800A 800A 400A 1200A Main Devices Branches Max. Amps Branch Devices Subfeeds Max. Amps (0% Rated) Subfeed Breaker Types THQB, THHQB, TQD, THQD, TEY, TJD, TFJ TEY, TFJ, TJJ THED, TFJ, TJJ TEY, TFJ, SE, SF 0A1 ph, 2ph 80A8 1/2 Box 0A 0A 0A 0A 0A 0A 1200A 150A3 ph 80A7 1/2 Box THQL, THHQL THQB, THHQB, TXQB (Bolton) SE, SF, SG, SK TEY FB,TED, THED, SE TEY, SE, TFJ, SF, TJJ, SG TEYRC, TEY, THQBGF THQB, THHQB, TQD, THQD, TEY, TFJ, SE, SF THQL, THHQL THQB, THHQB, TXQB (Bolt on) TEY TED, SE, SF, SG, SK, THQB, THHQB, TEY, TQD, ADS Switches, FB, FC, FE, FG TQD, THQD TQD, THQD TED, TFJ, SE, SF TED, TFJ, SE, SF TED, TFJ, SE, SF TQD, THQD TQD, THQD TED SF, SG, SK, ADS Switches, FB, FC, FE, FG ASeries Standard Main Breaker Types and Ratings Panel Type IC AQ/AL AE / Lighting Control Panel AD / AD Plus Ratings Voltage 0A 400A 3 600A 3 800A 3 150A 400A 600A 800A 150A 400A 600A 800A 240 THQB TQD/TFJ SKHA8 240 THHQB THQD TJD SGHA TEY SFHA SGHA4 SGHA6 SFHA 4 SGHA4 4 SGHA SEL SFL SGL SGL SEP SFP SGPA Y/277 TEY 4 TFJ 4 SGHA/TJJ 4 SGHA6 SKHA8 TED TFJ TJJ Y/277 SEHA SFHA SGHA4 SGHA6 18 SKHA8 25 SEHA 4 SFHA 4 SEHA SFHA Y/277 SELA 4 SFLA 4 SGLA4 SGLA Y/277 SEPA 4 SFPA SEPA SFPA SGPA4 SGPA TED TFJ TJJ SGHA SELA SFLA SGLA4 SGLA SEPA SFPA SGPA4 SGLA THED TFJ TJJ SGHA6 SKHA SELA SFLA SGHA4 SGHA6 35k 2 600Y/347 1 AE Panels are suitable for use on 3PH, 3W applications when derived from 3PH, 4W 480V/277 service where the neutral is not connected to the panel. For 3phDelta use AD Panels. 2 Not series rated. 3 Not available in column panelboards. 4 Light Control Panel ratings. SEPA SFPA SGPA4 SGPA Rev. 1/08