Typical AD Panelboard
|
|
- Todd Hines
- 6 years ago
- Views:
Transcription
1 Typical AD Panelboard Installation Consult instructions NEMA PB-1.1 located in the circuit directory on the front door before installing this panelboard. If necessary, order replacement manual from supplier. Wiring Guidelines (Cu or Al) Use 60 C or 75 C ampacity sized wire on line and neutral and equipment ground terminals. Standard wire sizes listed in this publication may be changed by using alternate terminal kits. Refer to circuit breakers for allowable wire temperature rating, wire size and tightening torque. Neutral rated for 200% panelboard phase current option. Use copper wire only at neutral main lugs - 125A (1) neutral cables 250 mcm maximum - 225A (2) neutral cables 250 mcm maximum - 400A (2) neutral cables 600 mcm maximum - 600A (4) neutral cables 50 mcm maximum Suitable for nonlinear loads, 200% rated neutral, additional Y lugs provided for 200% neutral. Short Circuit Current Rating The panelboard s maximum short circuit interrupting rating in rms symmetrical amperes, is equal to the lowest interrupting rating of any device installed, except as noted in the series rating listed in DEH-40007, with integral or remote main circuit breaker or fusible switch installed upstream of the panelboard. Devices to be installed or replacement units shall be from the same manufacturer, of the same type, and have equal or greater interrupting capacity. Maximum continuous loads on main or branch circuits shall not exceed 80% of the ratings of the listed circuit breakers. Branch breaker straps suitable for 200A maximum. Tripped Breaker If the breaker trips, handle will be in intermediate position. Instructions To Restore Power 1. Move handle to OFF position. 2. Then move handle to ON position. Seismic Rating Meets or Exceeds the Requirements According to IEEE High Level with 1.8 Amplication Factor IBC-2006 Sds = 1.g, Ss = 200%, Ip = 1.5, for z/h > 0 Sds = 2.0g, Ss = 00%, Ip = 1.5, for z/h = 0 In accordance with ICC-ES-AC156 Polybag Contents A polybag of goods supplied with every panelboard interior contains: Arc flash label DEH Series Ratings, Wiring Diagrams & Circuit Directory Series rating sticker Front installation instructions ANSI PB1 documentation Circuit numbering stickers (1-84) Front and shield mounting screws
2 Torque Tightening Torque Applies to line, neutral and equipment ground terminal AWG Wire Slotted Screw Min Lbs-Ins Max / Hex Size Internal Hex Min Lbs-Ins Max / / / / / Torque Values for Hardware Screw Size Torque (In-Lbs) #4 Steel 16 #10 Plastic 16 #8 Cu/Al/Steel #10-2 Cu/Al/Steel 2 1/4-20 Al/<.150 Thick Cu 44 1/ Thick Cu 60 5/16- Cu/Al/Steel 110 /8-16 Cu/Al/Steel 220 1/2-1 Cu/Al/Steel 220 Lug Kits Lug Kits for A-Series II Panelboards Rating Pressure Lug Kit Crimp Lug Kit Pressure Lug Kit Wire Range Al/Cu Wire Range Al/Cu Wire Range Cu Only 125A MLA MLT MLR A MLA2 1/0-250 MLT2 2/0-500 MLR2 1/ A Standard - MLA MLT (Cu Only) MLR41 1/0-600 Oversize MLA62 /0-800 (Main) & (Neutral) A Standard -MLA MLR61 1/0-600 Crimp Tools Wire Crimp Tool All Al & Up to 500 MCM Cu Hubbell Anderson VC MCM Cu Hubbell Anderson VC7 Up to # MCM Cu & #5-750 kcmil Al Burndy Tool Y644HS Neutral Lug Z Holes Wire Size Cu / Al Large 2 / 0-14 Small No Arc fault label included with all interiors to be applied by electrical contractor.
3 Interrupting Ratings - Molded Case Circuit Breakers Circuit Breaker Terminals (Cu-Al) Standard Frame Molded Case Circuit Breakers Federal Spec UL Listed Interrupting Ratings in ka Construction Frame Trip Range (Amps) Pole AC DC Current Limiting / High Interrupting Poles No. per Pole C/B Class W-C-75B Per Lug RMS Symmetrical AC Volts Y/ TED , 480 TED , , TED E THED THED THED FBV , 600Y/ Record Plus FBN , 600Y/ FBH , 600Y/ SEH b, 15b a SEL b, 15b a, 22a, 2a SEP a a, 2a SFH b a, 22a SFL b a, 2a Spectra RMS a SFP a, 2a SGH , a, 2a SGH , 600 2a SGL , 600 2a SGP , 600 2a SGL , 600 a SGP , a SKH , a, 2a SKL , 600 a SKP , a Poles are not DC rated 2 Not current limiting breaker type Wire Cu-Al (Unless otherwise specified) TED, THED 1 1 TCAL12 1 (0-60A) #14- Cu or #12-1 Al TED4 2, 1 TCAL12A 1 (70-90A) #6-2/0 Cu or #4-2/0 Al TED6, THED 2, 1 TCAL15 1 ( A) #-/0 1,2, 1 FCAL12 1 (15-20A)#14-#12 Cu or #10-12 Al FBV, FBN, FBH, FBL 1,2, 1 FCAL1 1 (5-60A)#10-#6 Cu or #8-#4 Al 1,2, 1 FCAL14 1 (70-100A)#4-#1 Cu or #2-1/0 Al - SEH, SEL, SEP 2, 1 TCAL 1 #12-/0 Al; #12-/0 Cu SFHA SFLA, SFPA 2, 1 TCAL129 1 #8-50kcmil SGHA SGL, SGP 2 1 TCLK (2/0-400kcmil, Cu) or 2 (2/0-500kcmil, Al) or #6-600kcmil 1 TCLK (2/0-400kcmil, Cu) or 2 (2/0-500kcmil, Al) or #6-600kcmil - FGN4, FGH4 2, 1 FCALKH - Top Hole #8-400kcmil Cu or #6-500kcmil Al. Bottom hole #2/0-600kcmil Cu & Al TCAL41 1 #4-600kcmil or 2(1/0-250kcmil) SKHA8 SKLA8, SKPA8 2, 1 TCAL61 2 2/0-500kcmil TCAL81 /0-500kcmil Range
4 Wiring Space Wiring Space Typical Panelboard Typical Panelboard Front view with trim removed Front view with trim removed Typical Front w/concealed Hinges and Typical Front w/concealed Hinges Trim Adjusting Screws and Trim Adjusting Screws Surface mounting Surface mounting add 1/4 add to inside 1/4 to box inside dimensions box dimensions Flush mounting Flush mounting add 1 1/2 add to 1 inside 1/2 to box inside dimensions box dimensions Typical Box Typical Box For /8 Bolt Box Width (Inside) Box Height (Inside) Minimum Minimum Wiring Wiring Space, Space, From End From of End Lug of to Lug Box to Wall, Box Wall, in Inches in Inches Main Lugs Only, to Main Circuit Breaker Main Lugs Only, to End Wall Main Circuit Breaker End Wall Frame Phase Lug Neutral Lug Main rating Main amps rating in amps Frame Type Mounting Mounting Phase Lug Phase Lug Neutral Lug Type To Side Wall Neutral Lug Phase Lug Neutral Lug To Side Wall (20 Wide box) To End To End Wall Wall (20" Wide box) 125A MLO, 100A Main Breaker 6 6 TEY, SE Horizontal A MLO, 100A Main Breaker 6 6 TEY, SE Horizontal A TFJ, SF Vertical A TFJ, SF Vertical A SF, SG, FG Vertical A (1) SF, SG, FG Vertical (1) 600A SG Vertical A (1) SG Vertical A SK Vertical A (2) (1) SK Vertical - - To side wall 4 (1) To side wall (2) Box width is 0 and 7.81 deep Box width is 0 and 7.81 deep Wiring Space Branch Circuit Breakers Wiring Space Branch Circuit Breakers Minimum Wiring Spaces To Branch Circuit Branch Circuit Devices Devices Frame Frame No. of Poles No. of Poles Minimum Side Wiring Wall (20" Spaces Wide To Side Box) Wall (20 Wide Box) FB, TED, THED 1,2,.7 Double Double Branched Bolt-on Devices THQL, THHQL, THQB, THHQB 1,2, 6.5" SE 2,.7 Horizontal Subfeeds Single Branch Mounted TQD, THQD 2, 5.5" Enclosures Enclosures Box Panel Size Box Front 7 5 Size Inches Front Panel Size 6 (1) Size Inches (2) AB25B 25.5 () AF25F,S AB25B 25.5 AF25F,S AB1B 1.5 AF1F,S AB1B 1.5 AF1F,S AB7B 7.5 AF7F,S AB7B 7.5 AF7F,S AB4B 4.5 AF4F,S AB4B 4.5 AF4F,S AB49B 49.5 AF49F,S AB49B 49.5 AF49F,S AF55F,S AB55B 55.5 AF55F,S AF64F,S AB64B 64.5 AF64F,S AF76F,S AB76B 76.5 AF76F,S B suffix provides blank end walls. Order K suffix for endwalls (1) B suffix provides blank end walls. Order K suffix for endwalls with knockouts. with knockouts. (2) Standard boxes are 20" wide by 5.81" deep. 6 Standard boxes () Flush are fronts 20 are wide 1 1/2" by 5.81 larger deep. than box. Surface fronts are 1/4" larger. 7 Flush fronts are 1 1/2 larger than box. Surface fronts are 1/4 larger. Box Options Box Options Suffix (1) Painted Box P Suffix 11 Painted Box0" wide (2) W P 0" wide NEMA R/12/4S/4X or 4 12 W NEMA 4X (16 Stainless Steel) 4S NEMA R/12/4S/4X or 4 NEMA RX (1) Door-in-door Add to base box product number. M (2) Includes field installable gutter barrier. NEMA 4X (16 Stainless Steel) 4S 11 Add to base box product number. 12 Includes field Permanent installable Circuit gutter barrier. Number Kits Permanent 1-48Circuit Number APN48 Kits 4-84 APN APN APN APN APN126 Front Options Front Options Suffix 8 8 Add to base front Screw cover Cat. C No. Suffix catalog (1) number. Front Screw hinged to cover box C D 9 Consists of two lockable Yale 5116 Front w/rosette hinged Lock to box D Y doors one over panel Corbin Yale Lockw/Rosette Lock Y L interior and one over GE 75 Corbin Key Lock15767 Lock L E box wiring gutters. Yale Corbin GE 6075 Key Key Lock Lock E J locks (1) not Add available. to base front Door Corbin within a door 60 Key 9 Lock J P catalog number. 10 Flush only. Available Stainless Door steel within 10 a door (2) P S (2) Consists of two lockable and doors one N options. over with C 0 wide Stainless steel () S W panel interior and Nameplate 0 wide WN one over box wiring Screw Nameplate on nameplate N U gutters. Yale locks Metal Screw directory on nameplate U M not available. () Flush only. Available Metal directory M with C and N options. Stainless Steel Enclosures Stainless Steel Enclosures Dimensions (inches) Cat No. HDimensions W (inches) D Cat No. UL Standard CSA Labeled 25.5 H W20 D 6 UL Standard AB254S CSA Labeled AB254AS AB254S AB254DWS AB254AS AB254DWAS AB254DWS AB14S AB254DWAS AB14AS AB14S AB14DWS AB14AS AB14DWAS AB14DWS AB14DWAS AB74S AB74AS AB74S AB74AS AB74DWS AB74DWAS AB74DWS AB74DWAS AB44S AB44AS AB44S AB44AS AB44DWS AB44DWS AB44DWAS AB44DWAS AB494S AB494S AB494AS AB494AS AB494DWS AB494DWS AB494DWAS AB494DWAS AB554S AB554S AB554AS AB554AS AB554DWS AB554DWS AB554DWAS AB554DWAS AB644S AB644S AB644AS AB644AS AB644DWS AB644DWS AB644DWAS AB644DWAS AB764S AB764S AB764AS AB764AS AB764DWS AB764DWS AB764DWAS AB764DWAS
5 Accessories Field Installed Kits/Replacement Parts Filler Plates Breaker Type THQB/THHQB/THQL THHQL/TEY TQD/THQD/TED4/SE/FB Endwall Kits TQLFP1 TEDFP1 Breaker Mounting Hardware Kits For mounting breaker in existing space Breaker Type TED/THED4/SE TQD/THQD FB Field installed. 1 each, for standard 20 w x 5.81 d boxes. Type Blank Knockout ABEW2 ABEW2 ASPTEDP ASPTQDP ASPFB12P Equipment Grounds AEBG AEIG ASPGIBC AEBGC Item Metal Equipment Ground Aluminum Equipment Ground Copper Equipment Ground Bonded Extruded Bonded Extruded Bonded Extruded Isolated Main Lug Bonded Extruded Bonded Extruded Isolated Insulated Isolated AEIGC Wire Range (1) #6-50MCM (2) #6-250MCM (1) #4-50MCM (1) #6-250MCM 2/0 max. TGL2 EGS12 AEBG AEIG TGL2 TGC2 AEBGC AEIGC ASPGIBC Parts Directory Card Replacement Lock with Std. Key Replacement Lock with GE75 Key Additional Keys for Above Lock Circuit Numbering Strips 1-48 Circuit Numbering Strips Circuit Numbering Strips Adhesive Backed Lamicoid Nameplate /4" x " Metal Directory Card Holder Directory Card Holder Delta Hi-leg Conversion Kit, to Add B-Phase Plug on AL Panels Bolt on AE/AQ Panels NEMA R/12 Tamper Proof Tork Screw Kit 2P to P TQD Conv. Kit 2P to P SF Conv. Kit for horizontal subfeed AD 25 to 65 kaic Barrier kit Service Entrance Kit 2 wire Relay Kit Yale Lock Kit Corbin Lock Kit 2- pole TQD Mechanical Interlock AQ/AL/AE Rail Bracket Front Flush Adjust Kit AE Front Mounting Kit AQ/AL Front Mounting Kit AD Front Mounting Kit Front Hinge to Box Mounting Kit Front Extension Mounting Kit Box Extensions Bolts to box with or without endwall in place. Extensions can be combined to obtain lengths greater than and inches. Box Width and Depth Bonding Kits For Split & Load End Neutral For 225A Horizontal Neutrals 225A Horizontal Neutral To Convert W to 4W 125/225A Horizontal Neutral Conversion from Service Entrance to Non-Service Entrance 125/225A Horizontal Neutral to Convert from Non-Service Entrance to Service Entrance Box Mounting Flush 4L886G16 4L886G1 ASP225HNCP ASPHNCPSENOT 20 x 5.81 Surface ASPHNCPSE Installation & Maintenance Kit Order catalog number PROCARE. Kit includes: (5) filler plate hardware kits (9) bus stud nuts (5) MLA1 filler plates (2) 225A phase barriers (2) feed-thru barriers (1) 400/600A phase barrier (50) directory cards/rating books (50) circuit number strips (1-48) (50) circuit number strips (4-84) (5) standard locks & keys (50) deadfront screws (10) AQ/AE front hardware kits (10) AD front hardware kits (50) service disconnect labels (50) main labels 19C5612P 569B77P1 569B77P2 569B77P5 569B806G1 569B806G2 569B806G 15A7190P1 19C5491G1 19C5491P4 APHBL APHBQ NEMATRX ASP2PTQDP ASP2PTFJP ASP25AD65KA1 ASPSERENT ASP2WRelay ASPYALE47 ASPCORBNTEU1 TQDFM1 ASPAQLEBKT ASPFLUSHADJ 19C5720G 19C5720G6 19C5728G9 19C5700G6 19C5700G11 Flush 0 x 5.81 Surface Flush 0 x 7.81 Surface Box Extension Length (Inches) ABX2509F ABX25F ABX25F ABX2509S ABX25S ABX25S ABX251S ABX257S ABX254S ABX2549S ABX2555S ABX2564S ABX2576S ABX5F ABX5F ABX5S ABX5S ABX7F ABX7F ABX7S ABX7S Box Extension Covers Only 10 covers per kit 9" Covers Surface 9" Covers Flush " Covers Surface " Covers Flush 64" to 76" Covers Surface 64" to 76" Covers Flush ASPABX09S ASPABX09F ASPABXS ASPABXF ASPABX20S ASPABX20F
6 Specifications A-Series Panelboards and branch breakers meet or exceed the following standards and specifications: UL 50 Cabinets and Boxes UL 67 Panelboards UL 489 Circuit Breakers NEMA AB-1 Circuit Breakers NEMA PB-1 and PB-1.1 Panelboards US Federal Spec W-P.115B Panelboards US Federal Spec W-C75b Gen Circuit Breakers Boxes Galvanized steel Blank end walls are standard; knockouts are available when specified Boxes furnished with provisions for ground bus as standard Fronts Finished in ANSI-61 grey polyester powder coat paint. Equipped with corrosion-resistant Valox combination catch and lock door latch (doors over 48 high provided with 2 latches) Equipped with concealed hinges and trim adjusting screws Directory holder permanently mounted to door Panels Dead front construction Interiors are factory assembled on rigid steel frames Metal gages in accordance with UL and NEMA standards Solderless, anti-turn main lugs suitable for copper or aluminium wires are front removable and branch straps are silver-plated copper fully rated at 100 amperes Main bus is aluminum with copper branch connections unless otherwise specified Main disconnect device is identified when supplied, and numbers are provided for branch circuits Interior base assemblies are Noryl and provide breaker mounting and busbar insulation Publications E-DET-465 DE-44A DEH DEH 047 DEH 059 DEH 060 DEH 061 DEH 065 Certification of Seismic Compliance Typical AD Panelboard Technical Information Lighting Panels Rating Labels, Wiring Diagrams and Circuit Directory TED, THED, SED, SHE, SEL, SEP Circuit Breaker Mounting Instructions SGH, SFL, SFP Circuit Breaker Mounting Instructions SGH, SGL, SGP Circuit Breaker Mounting Instructions SKH, SKL, SKP Circuit Breaker Mounting Instructions TQD, THQD Circuit Breaker Mounting Instructions GE 41 Woodford Avenue Plainville, CT Information provided is subject to change without notice. Please verify all details with GE. All values are design or typical values when measured under laboratory conditions, and GE makes no warranty or guarantee, express or implied, that such performance will be obtained under end-use conditions. 2017, General Electric Company and/or its affiliates. All rights reserved DE-44B
Typical AE Panelboard
Typical AE Panelboard Installation Consult instructions NEMA PB-1.1 located in the circuit directory on the front door before installing this panelboard. If necessary, order replacement manual from supplier.
More informationTypical AE Panelboard
Typical AE Panelboard Installation Consult instructions NEMA PB-1.1 located in the circuit directory on the front door before installing this panelboard. If necessary, order replacement manual from supplier.
More informationTypical ADP Panelboard
Typical ADP Panelboard 400/600/800A Installation Consult instructions NEMA PB-1 located in the circuit directory on the front door before installing this panelboard. If necessary, order replacement manual
More informationTypical AQ/AL Panelboard
Typical AQ/AL Panelboard Installation Consult instructions NEMA PB-1.1 located in the circuit directory on the front door before installing this panelboard. If necessary, order replacement manual from
More informationTypical AEP Panelboard
Typical AEP Panelboard 400/600/800A Installation Consult instructions NEMA PB-1 located in the circuit directory on the front door before installing this panelboard. If necessary, order replacement manual
More informationSUBMITTAL TRANSMITTAL
SUBMITTAL TRANSMITTAL GENERAL CONTRACTORS 835 GIL HARBIN INDUSTRIAL BLVD. VALDOSTA, GA 31601 (229) 244-6709 Fax (229) 244-7778 DATE July 2, 2010 JOB NO. 09-019 TO: BES Incorporated 2712 Bull Street Beaufort,
More informationPanelboards. Section 9. GE Fastrac Program Service. New from GE!
GE Fastrac Program Service Fastrac : Fastrac shipment of 5A 800A is available for select main and branch breaker types. Shipments leave the factory as quickly as 4 hours after the order is placed. Contact
More information1 Installation of accessories in molded case switches requires dummy trip; see page. Breaker/Switch Type TQD/TJD
Molded Case Circuit Breakers Industrial Circuit Breakers Section 3 TriBreak Line Integrally Fused Thermal Magnetic Circuit Breakers Integrally Fused Magnetic Circuit Breakers Integrally Fused Molded Case
More informationTHQL1120AF2 THQL1120AF2 Arc Fault BRKR
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 THQL1120AF2 THQL1120AF2 Arc Fault BRKR Industrial Connections & Catalog Number THQL1120AF2 Manufacturer Industrial Connections
More informationMolded Case Circuit Breakers Section 3 Q-Line Circuit Breakers
Molded Case Circuit Breakers Section 3 QLine Circuit Breakers Cablein Cableout (luglug) 240V Class TQD 240 Vac, Internal Common Trip # of Ampere 240 Vac Price Poles Rating Interrupting Rating Product Number
More informationGE Energy. GE Panelboards. The right panelboard for any application. imagination at work
GE Energy GE Panelboards The right panelboard for any application imagination at work GE Panelboards Right on design, right on manufacture, right on service From design through manufacture and delivery,
More informationEvolution Series Switchboards
GE Energy Evolution Series Switchboards Quick Reference imagination at work Main Lug Main Device Width (W) Switchboard Frame Neutral Bus Width (W) Switchboard Frame Neutral Bus Cover 3 A Ground Bar 10
More information1 Installation of accessories in molded case switches requires dummy trip; see page. Breaker/Switch Type TQD/TJD
Molded Case Circuit Breakers Industrial Circuit Breakers Section 3 TriBreak Line Integrally Fused Thermal Magnetic Circuit Breakers Integrally Fused Magnetic Circuit Breakers Integrally Fused Molded Case
More informationSmall Project Product Selection Guide
Small Project Product Selection Guide At your GE Distributor today! Panelboards Transformers Safety Switches NEMA Combo Starters Lighting Contactors imagination at work Small Projects Same Day When you
More informationSection 11. Panelboards. BuyLog Catalog Section Updated 07 / 2014
Section Updated 07 / 2014 FE as a main breaker in A-Series Panelboards: Expanding GE s selectivity offering. The FE main breaker in A-Series allows full instantaneous selectivity, which can be coordinated
More informationSection 3. Molded Case Circuit Breakers.
Molded Case Circuit Breakers Section 3 Industrial Circuit Breakers How to Order...3-2 Features...3-4 Quick Reference Guide...3-5 Q-Line Circuit Breakers Plug-In 120/240V Class...3-11 Plug-In 240V Class...3-13
More informationQuik-Spec Coordination Panelboard Specifications
Quik-Spec Coordination Panelboard Specifications 30A - 400A Fusible Panelboards SECTION 26 24 XX (This Specification references CSI MasterFormat 2004) FUSIBLE BRANCH CIRCUIT PANELBOARDS PART 1 1.01 SUMMARY
More informationtype P1 Lighting and Power Distribution Panelboards Overview P1 Panelboards
type P Lighting and Power Distribution Panelboards Specifications Main Breaker: 400A Maximum Main Lugs only: 400A Maximum Voltages: 480Y/277V AC Maximum 250V DC Maximum 3Ø3W, 3Ø4W, Ø3W, Ø2W General P panelboards
More informationSECTION PANELBOARDS
SECTION 16470 PANELBOARDS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. The general provisions of the contract including General and Special Conditions and General Requirements shall apply to all work under
More informationApplications. Trim are flat gauge steel per code. Standard painted finish ANSI 61 gray. Directory card with plastic cover on front of trim
Applications The CDP panels provide protection for lightning and power distribution circuits in the commercial and industrial establishments. The circuit breakers thermomagnetic trip allows for momentary
More informationPanelboards Circuit Breaker / Lighting and Distribution
Circuit Breaker / Lighting and Distribution 480Y/277 Vac Maximum 600Y/ 347 Vac (CSA only) Maximum 400 Ampere Mains 400 Ampere Maximum Branch UL Short Circuit Rating 200,000 A. @ 240 Vac / 100,000 A. @
More informationBoxes C " wide, 5 3 4" deep. C " wide, 5 3 4" deep. Branch Breaker Side Gutters. Type Breaker (inches) C1 BL, BLH, HBL C2 BQD 3.
Circuit Breaker / Column Type Type C1 240 Volts AC Mains Branch UL Short Circuit Rating 200,000 IR Branch Breaker Symmetrical Interrupting Rating Based on Underwriters Test Procedure Type C2 480Y/277 Volts
More informationSelection and application guide
Selection and application guide 30A 400A fusible panelboards Coordination Panelboard www.usa.siemens.com/fusiblepanel Coordination panelboards Table of contents Subject Page Specifications 2-3 Enclosure
More informationSection 6. Molded Case Circuit Breakers. BuyLog Catalog 6-1. Section Updated 03 / 2014
Molded Case Circuit Breakers Section Updated 0 / 014 Section 6 Industrial Circuit Breakers How to Order...6- Features...6-4 Quick Reference Guide...6-6 Q-Line Circuit Breakers Plug-In 10/40V Class...6-14
More informationMolded Case Circuit Breakers. Section 6. BuyLog Catalog 6-1
Molded Case Circuit Breakers Section 6 Industrial Circuit Breakers How to Order...6-2 Features...6-4 Quick Reference Guide...6-6 Q-Line Circuit Breakers Plug-In 120/240V Class...6-14 Plug-In 240V Class...6-16
More informationModular Metering Application Guide. Meter Mod * III Product Family
Modular Metering Application Guide Meter Mod * III Product Family Table of Contents Page No. Selection Guidelines and Nomenclature 3 UL Standard Listing and File Numbers for Meter Mod III Product Family
More informationPanelboard Renewal Parts Supplement
Panelboard Renewal Parts Supplement Contents Page Page Contents Page PRL 1a and a Neutral Assemblies..................................................... 3 PRL 1a and a Ground Assemblies.......................................................
More informationPow-R-Line 3E Panelboard
This is a photographic template your photograph should fit precisely within this rectangle. Pow-R-Line 3E Panelboard 2008 Eaton Corporation. All rights reserved. Pow-R-Line 3E Panelboard Design guided
More informationIntroduction. P1 Panelboards. P1 Feature Overview. Contents. Siemens Panelboards Introduction to P1 Panelboards 1. General Specifications 3
Introduction P1 Panelboards P1 Feature Overview Key Panelboard Features Lighting and Appliance Applications Power Panelboard Applications Convertible From Top Feed to Bottom Feed and Vice Versa Change
More informationModular Metering. Canadian Version
Modular Metering Canadian Version Meter Centres and Tenant Breakers...2 Industrial Multi-Metering...3 Main Service Modules...4 Main Terminal Boxes...7 Main Circuit Breakers...8 Main Fusible Switches...9
More informationPanelboards and Lighting Control. Types PRL1a, 2a, 3a, 3E, 4 and Column Modifications. Contents Description
.5 Types PRL1a, 2a, a, E, 4 and Column Modifications s Types PRL1a, 2a, a, E, 4, Column Modifications Selection Guide Modifications Alphabetical Index Modification Item Contents Types PRL1a, 2a, a, E,
More informationLighting Panelboards. P2 Panelboards
Lighting Panelboards P2 Panelboards Features Flexibility is the hallmark of the P2 panel. This panel offers a wide array of factory-assembled options to meet virtually any lighting panel application. The
More informationPANELBOARDS SECTION 1
SECTION 1 P1 PANELBOARDS Description Page General Information 1-2 Selection and Application 1-2 Application 1-3 1-6 Main Breaker Panel Size Selector 1-3 Main Breaker Selection 1-3 Main Lugs Size Selector
More informationMolded Case Circuit Breakers. Section 6. BuyLog Catalog 6-1
GuardEon Circuit Breakers Overview...6-2 Industrial Circuit Breakers How to Order...6-4 Features...6-6 Quick Reference Guide... 6-8 Q-Line Circuit Breakers Plug-In 120/240V Class...6-16 Plug-In 240V Class...
More informationModular Metering Construction Details
GE Consumer & Industrial Electrical Modular Metering Construction Details Contents Meter Mod III Main Breaker Module, Single Phase, Top or Bottom Feed...........................1 Main Switch Module, Single
More information2018 Consultant s Handbook Division 26 Electrical 2413 Switchboards
1 General 1.1 Switchboards shall be U.L. listed and labeled. 1.2 Each switchboard shall have its own main disconnecting means unless it is located in the same room as its source of origin. In most cases
More informationCON EDISON EQUIPMENT
CON EDISON EQUIPMENT Con Ed Navtech Size Volts Amps List Spec. Cat. No Description Price 205 N-205 10x10x5 100 $72.00 205 RTN-205 10x10x5 100 190.00 215 N-215 24x12x8 200 144.00 215 RTN-215 24x12x8 200
More informationApplication guide. Tmax Link OEM UL 891 Switchboard Program
Application guide Tmax Link OEM UL 891 Switchboard Program 04 Tmax Link Overview 04 Standards 04 UL File Extension Process Overview 05 Electrical Data 05 Technical Data 05 Ambient Conditions 08 Circuit
More informationModular Metering Application Guide
GE Energy Connections Modular Metering Application Guide Mini Mod* III Product Family Table of Contents Page No. Nomenclature 3 Mini Mod III Photos 4 Mini Mod III Ring -Type and Ringless 5 Mini Mod III
More informationA. Submit manufacturer's literature and technical data before starting work.
SECTION 16425 SWITCHBOARD PART 1 GENERAL 1.01 SUMMARY A. Related Section: 1. 16450 - Grounding. 1.02 SUBMITTALS A. Submit manufacturer's literature and technical data before starting work. B. Submit Shop
More information3.6. Panelboards and Lighting Control. Contents Description Product Overview... Product Selection Guide... Pow-R-Command 750 Panelboard...
.6 Panelboards and Lighting Control PRC25 Panelboard PRC25 Panelboard Product The PRC25 panelboard is designed to meet the needs for control of lighting and small branch circuits. Used as a standalone
More informationMP Meter-Pak Meter Centers Product Description PRODUCT DESCRIPTION. MP Meter-Pak Meter Centers
Product Description PRODUCT DESCRIPTION MPH66125 with Horn Bypass Square D brand MP Meter-Pak meter centers from Schneider Electric offer a wide range of solutions for multi-metering applications: UL Listed
More informationQMB Fusible Panelboards
Catalog 4620CT9601R04/09 2009 Class 4620 CONTENTS Description............................................. Page Overview.............................................. Page 3 QMB Switches..........................................
More informationMP Meter-Pak Meter Centers Product Description PRODUCT DESCRIPTION. MP Meter-Pak Meter Centers
Product Description PRODUCT DESCRIPTION MPH66125 with Horn Bypass Square D brand MP Meter-Pak meter centers from Schneider Electric offer a wide range of solutions for multi-metering applications: UL Listed
More informationTenant Main Circuit Breakers. for GE Meter Mod * III Modular Metering
for GE Meter Mod * III Modular Metering Your guide to GE s GE tenant main circuit breakers are typically used in residential and light commercial group metering applications. This product category offers
More informationGE Industrial Solutions. EntellEon * Low-Voltage Power Panel. Simple. Responsive. Revolutionary.
GE Industrial Solutions EntellEon * Low-Voltage Power Panel Simple. Responsive. Revolutionary. Introducing EntellEon A More Versatile Alternative to Traditional Power Panels EntellEon, the new low-voltage
More informationAmerican Electric Supply, Inc.
American Electric Supply, Inc. 6 S. Maple Street Date: 0/8/204 Corona, CA 92880 Telephone: 95-80-4665 Email: bmcdonald@amelect.com Fax: 95-552-626 Speedi Version: V 0.6 Valued Customer, Bill of Material
More informationPANELBOARDS C1/C2 SECTION 6
SECTION 6 C1/C2 PANELBOARDS Page General Specifications 6-2 Box Sizing 6-2 Gauge Steel Boxes 6-2 Fronts 6-2 Main Breaker Connectors 6-2 Main Lug Connectors 6-2 Selection 6-3 6-5 Main Lugs Only C1 and C2
More informationGE Consumer & Industrial
GE stock list for connector kits and replacement breakers (most common) Breaker Mounting Hardware for Spectra bolt-on and Jiffy (includes hardware, brackets and filler plate) AMCB4EYFP AMCB6EYFP AMCB6EBFP
More informationNEHB Circuit Breaker Panelboards. For 480Y /277V. ac Systems
NEHB Circuit Breaker Panelboards For 480Y /277V. ac Systems www. ElectricalPartManuals ElectricalPartManuals. com com NEHB Panelboards EHB (bolt-on) Circuit Breakers MONO-FLAT front features completely
More informationLoadcenters and Circuit Breakers. Contents. Overview. Three-phase, four-wire, 208Y/120 Vac Three-phase, three-wire, 240 Vac delta
. Eaton Type CH Convertible Family Overview Product Selection Guide CH Loadcenters Description Service Single-phase, three-wire, 20/240 Vac Three-phase, three-wire, 240V corner grounded delta Short-Circuit
More informationWARREN COUNTY, N.Y. M/E REFERENCE
SECTION 262000 - ELECTRIC DISTRIBUTION PART 1 - GENERAL 1.1 DESCRIPTION A. Provide a complete secondary distribution system as indicated on the Contract Documents and as specified herein. 1.2 QUALITY ASSURANCE
More informationMP Meter-Pak Meter Centers
Catalog 4141CT0701 2008 Class 4141 MP44125 MP86200 CONTENTS Description..............................................Page Product Description........................................... 2 General and Application
More informationTechnical catalog February 2017 Low Voltage Switchboards and Panelboards UL/CSA
Technical catalog February 2017 Low Voltage Switchboards and Panelboards UL/CSA Table of Contents TPS NQ & AQ Series Overview 2 Switchboard Technical Data 3-5 Panelboard Technical Data 5-11 1 Tier Power
More informationSection 1. Load Centers and Circuit Breakers. Section Updated 11 / 2014
Section Updated 11 / 2014 Q-Line Circuit Breakers Product Features and Benefits...1-2 PowerMark Gold Load Centers Product Features and Benefits...1-3 PowerMark Gold and Plus Load Centers Product Number
More informationQuik-Spec Coordination Panelboard
Read and retain for future reference Quik-Spec Coordination Panelboard Instruction Leaflet 3A1071 RevD Section TABLE OF CONTENTS Page Danger and warnings for installation of the equipment.............3-4
More informationEvolution * Series E9000 Motor Control Center
GE Industrial Solutions Evolution * Series E9000 Motor Control Center Renewal Parts Bulletin Table of Contents Introduction The E9000-Line motor control center, a quality product of the General Electric
More informationPanelboards. Type P3 Panelboards. General. Revised 04/15/14. Features
11 Panelboards Features Another innovation from Siemens is the P3 panel. It is a smaller, footprint distribution panel to fit a large number of applications that require more (or larger) branch devices
More informationModular Metering Stock Selection Guide. Meter Mod * III and Mini Mod * III Product Families
Modular Metering Stock Selection Guide Meter Mod * III and Mini Mod * III Product Families Table of Contents Page No. Nomenclature 3 Main Breaker Module, Single-Phase, 3 Wire, 0/40 Vac 4 Main Breaker Module,
More informationFused Coordination Panelboard
Fused Coordination Panelboard SOLUTIONS GUIDE SOLUTIONS GUIDE Branch Circuit Protection Introducing Mersen s Fused Coordination Panelboard Selective Coordination is required in several locations as defined
More informationQuik-Spec Coordination Panelboard A fusible panelboards
Supersedes July 2018 Quik-Spec Coordination Panelboard 30-400 fusible panelboards Contents Description Page Specifications... 2-3 Enclosure types and voltages/systems.... 4 using, main and feed-through
More informationXP Series Pre-Wired Factory Sealed Circuit Breaker Panelboards Explosionproof, Dust-Ignitionproof System
NEC/ Applications Protection and control of electrical apparatus and circuits in hazardous environments, either indoor or outdoor. Designed for Class I, Division 2 areas where flammable gases or vapors
More informationMolded Case Circuit Breakers Section 6 Q-Line Circuit Breakers
Q-Line Circuit Breakers Accessories 240V Class Terminals (Lugs) for Q-Line Circuit Breakers Ampere Rating Termination Type Wire Range (Cu/Al) Product Number 15-60 Lug (line only) 14-6/12-2 TQAL3A 15-60
More informationD2LC Series. Circuit Breaker Panelboards for Harsh and Hazardous Environments
D2LC Series Circuit Breaker Panelboards for Harsh and Hazardous Environments IBUTI TR HA ON DIS KILLARK Z LO C Type 4X Gasket Stainless Steel Tri-Lead Cover Bolts Spare Sealed Wires Termination at Terminal
More informationBussmann series Quik-Spec Coordination Panelboard
Quik-Spec electrical gear 12 Contents Bussmann series Quik-Spec Coordination Panelboard Section page Description Quik-Spec Coordination Panelboards Up to 400 A 2 600 to 1200 A 3 Quik-Spec elevator disconnects
More informationSECTION LOW VOLTAGE DISTRIBUTION EQUIPMENT
SECTION 16400 LOW VOLTAGE DISTRIBUTION EQUIPMENT A. General 1. The University does not accept Series-Rated equipment for power distribution switchboards, distribution panels and branch circuit panelboards.
More informationLaser Service Factory-assembled Panelboards
Factory-assembled Panelboards Price List 1600PL0701 2009 Class 1600 CONTENTS Description............................................. Page Product Overview........................................ Page
More informationA. Provide a complete system of overcurrent protective devises as indicated on the drawings, and as specified herein.
16475 OVERCURRENT PROTECTIVE DEVICES ************************************************************************************************************* SPECIFIER: CSI MasterFormat 2004 number: 26 28 16 An optional
More informationCutler-Hammer Molded Case Circuit Breakers Amperes. January 2001 Vol. 1, Ref. No. [0477] G-Frame
Cutler-Hammer January 200 Vol., Ref. No. [077] s Molded Case s 5-00 Amperes 2- 2-2 Product Line Overview January 200 Vol., Ref. No. [068] 2 Product Line Description Cutler-Hammer Molded Case s are designed
More informationCircuit Breaker Enclosures Section 7 NEMA Type 1
NEMA Type 1 Type 1, Indoor Surface or Flush Mounting NEMA Type 1 THQL, TXQL, THQL-GF 1, 2, 3 70 TQL70F 3 Included TQL70S 3 Included 1, 2, 3 100 TQL100F 3 Included TQL100S 3 Included THQC, THHQC, TXQC 1,
More informationRevised P1 Panelboards
Panelboards (Introduced January 2015) Data Sheet The Panelboards are now available in both Feed-thru (FT) and Non-Feed-thru (NFT) variations. There is a savings of 6 of box height when a NFT version is
More informationBRANCH CIRCUIT PROTECTION FUSED COORDINATION PANELBOARD
BRANCH CIRCUIT PROTECTION FUSED COORDINATION BOARD MERSEN S FUSED COORDINATION BOARD Selective Coordination is required in several locations as defined in the National Electrical Code (NEC). Mersen s Fused
More informationQuik-Spec Coordination Panelboard A fusible panelboards
USSMNN Supersedes December 2015 SERIES Quik-Spec Coordination Panelboard 30-400 fusible panelboards Contents Description Page Specifications.... 2-3 Enclosure types and voltages/systems.... 4 using, main
More informationSection 3: Molded Case Circuit Breakers
Section : Molded Case Circuit Breakers Molded Case Circuit Breakers Features...-2 Spectra RMS Circuit Breakers with MicroVersaTrip Plus Trip Units Features...- Molded Case Circuit Breakers Quick Reference
More informationEXBLI & EXBSPI Series. Circuit Breaker Panelboards for Harsh and Hazardous Environments
EXBLI & EXBSPI Series Circuit Breaker Panelboards for Harsh and Hazardous Environments KILLARK Z A H LO C NEMA 4X O Ring Gasket Stainless Steel Tri-Lead Cover New Slide MCB Assembly Handles Padlockable
More informationQuik-Spec Electrical Gear
Section Contents Page Quik-Spec Coordination Panel Boards......... 266-267 Quik-Spec Power Module Switches and Panels.. 268-269 Quik-Spec DC Safety Switches.................. 270 Quik-Spec AC Safety Switches..................
More informationSpectra RMS Molded Case Circuit Breakers
GE Consumer & Industrial Electrical Distribution Spectra RMS Molded Case Circuit Breakers imagination at work Contents Pages Spectra RMS at a glance.......................................1 Spectra RMS
More information2.7. Panelboards Solar Applications. Contents Description. Product Description. Pow-R-Line C Panelboards
Panelboards Solar Applications.7 Contents Description Introduction.............................. Product Selection Guide.................. EZ Box and EZ Trim........................ Type PRL1a...........................
More informationRCS1000 Data Sheet. RCS1000 Series Controllable Circuit Breaker Panel
RCS000 Series Controllable Circuit Breaker Panel RCS000 Data Sheet Overview The RCS000 Series Controllable Circuit Breaker Panels combines the benefi ts of traditional relay based load control and the
More informationJefferson Public Works Shop Building 2011
BENTON ELECTRIC, INC. SINCE 1967 CCB#4213 GET CONNECTED VOICE 541.967.1244 EMAIL@BENTONELECTRIC.COM Jefferson Public Works Shop Building 2011 701 N Second Street City of Jefferson, Oregon Electrical Equipment
More informationSPEEDFAX TM 2011 Load Centers & Circuit Breakers Contents
SPEEDFAX TM 20 Load Centers & Circuit Breakers Contents Load Centers ing System -2 Siemens PL and ES Series Load Centers Introduction -3 WireGuide Load Centers and Breakers -4 PL Series Load Centers Features
More informationSECTION DISTRIBUTION AND GROUNDING
SECTION 16400 DISTRIBUTION AND GROUNDING PART 1 GENERAL 1.01 SECTION INCLUDES A. Furnishing and installation of a complete electrical distribution and grounding system. B. Furnish and install motor control
More informationGE 8000-Line Motor Control Centers Mains, Feeders, Incoming Lines C-1
GE 8000-Line -1 Mains, coming Lines MAINS GENERAL Main units consist of an externally operable circuit disconnect, either a fusible switch or a circuit breaker. Sizes by ampere rating, short-circuit rating,
More information6.2. Power Pedestals. Contents
Power Pedestals.2 Power Outlet Panels Contents Description Page Product Overview................................. 287 Application Description.......................... 288 Features and Benefits...........................
More informationA. This Section includes Low Voltage Switchgear Work, as indicated on the drawings, and as specified herein.
16425 SWITCHBOARD ************************************************************************************************************* SPECIFIER: CSI MasterFormat 2004 number: 26 24 13 An optional keynote to
More informationSECTION ENCLOSED SWITCHES AND CIRCUIT BREAKERS
PART 1 - GENERAL 1.1 DESCRIPTION SECTION 26 29 21 ENCLOSED SWITCHES AND CIRCUIT BREAKERS SPEC WRITE NOTE: Delete between // // if not applicable to project. Also delete any other item or paragraph not
More informationProduct Description. Junction Boxes...V1-V23 Meter and Instrument Enclosures...V24-V33
SECTION V INDEX Product Description Page Number Junction Boxes......................................V-V2 Meter and Instrument Enclosures.......................V24-V Control Centers.....................................V4-V9
More informationSection 7. Circuit Breaker Enclosures. BuyLog Catalog 7-1
NEMA Type 1 Enclosures... 7-2 NEMA Type 3R Enclosures...7-3 NEMA Type 12 Enclosures...7-4 NEMA Type 4/4X Enclosures... 7-5 Hubs and Other Accessories... 7-6 Dimensions and Outline Drawings...7-7 Dimensions
More informationSection 4: Circuit Breaker Enclosures
Section : NEMA Type 1 Enclosures...-2 NEMA Type 3R Enclosures...-3 NEMA Type 12 Enclosures...- NEMA Type /X Enclosures...-5 Hubs and Other Accessories...-6 Dimensions and Outline Drawings...-7 Dimensions
More informationBussmann series Quik-Spec Power Module Switch elevator disconnect
Supersedes January 2016 Agency information UL 98 enclosed and dead-front switch - Guide WIAX, WIAX7 (Canada), File E182262 culus, NEMA 1, UL 50, Listed enclosure cul per Canadian Standards C22.2, No. 0-M91-CAN/
More informationP-2 D2P and EWP Factory Sealed Circuit Breaker Panelboards: Explosionproof, Dust-Ignitionproof, Watertight, Corrosion-Resistant
P-2 D2P and EWP Factory Sealed Circuit Breaker Panelboards: Explosionproof, Dust-Ignitionproof, Watertight, Corrosion-Resistant Applications Protection and control of electrical equipment and circuits
More informationDESIGN GUIDELINES LOW VOLTAGE SWITCHGEAR PAGE 1 of 5
DESIGN GUIDELINES LOW VOLTAGE SWITCHGEAR PAGE 1 of 5 1.1. APPLICABLE PUBLICATIONS 1.1.1. Publications listed below (including amendments, addenda, revisions, supplements, and errata), form a part of this
More informationUS CATALOG. ProLine Panelboard and breakers
US CATALOG ProLine Panelboard and breakers 2 PROLINE PANELBOARD AND BREAKERS PROLINE PANELBOARD AND BREAKERS 3 Table of contents 004 006 Description and features 007 008 Guides: and breaker placement 009
More informationLighting and Power Distribution Panelboards
EXPLOSIONPROOf Lighting and Power Distribution Panelboards The design offers sufficient gutter space on sides to allow through wiring and easy lug connection. All enclosures are furnished with hinges,
More informationPower Break II Switchboard
Power Break II Switchboard Now available with PowerBreak II Circuit Breakers through 4000A GE s Power Break II Switchboard is now available with the new Power Break II Insulated Case Circuit Breaker (800A
More informationStandard switch modules (type WS) are designed for flexibility, space savings, & durability.
Power Mod Standard switch modules (type WS) are designed for flexibility, space savings, & durability. Features include: QuickSystem features Standard compression lug capability Invertibility: 400-800
More informationGE Energy Industrial Solutions. EV Charging Station. Application Guide. imagination at work
GE Energy Industrial Solutions EV Charging Station Application Guide imagination at work EV Charging Station Introduction The GE EV Charging Station offers Level II charging capable of reducing charge
More informationCircuit Breaker Enclosures. Section 4.
Circuit Breaker Enclosures Section 4 NEMA Type 1 Enclosures...4-2 NEMA Type 3R Enclosures...4-3 NEMA Type 12 Enclosures...4-4 NEMA Type 4/4X Enclosures...4-5 Hubs and Other Accessories...4-6 Dimensions
More informationT H QL Recommendations based on standard conditions. Installation must conform to all local and national codes.
Catalog Number System For illustrative purposes only. Circuit Breaker Selection Guide T H QL 5 GE Identification Interrupting Rating Type Poles Voltage mpere Rating Insert for Specials H = 0kIC QL = Plug-in
More informationDesign Guide for Integration of Fixed-Mount Circuit Breakers
Design Guide Design Guide for Integration of Fixed-Mount Circuit Breakers WL Low Voltage Power Circuit Breakers www.usa.siemens.com/wlbreaker Contents Introduction... 3 Mounting... 3 Mounting Surface...
More information