Information. Serial Transmission System. Series EX250. ControlNet. Applicable valve manifold. Serial Wiring with Input/Output Unit.

Size: px

Start display at page:

Download "Information. Serial Transmission System. Series EX250. ControlNet. Applicable valve manifold. Serial Wiring with Input/Output Unit."

Fay Gibbs
5 years ago
Views:

Information SMC Corporation Akihabara UDX 5F, 4-4-, Sotokanda, Chiyoda-ku, Tokyo -, JAPAN URL http://www.smcworld.com 6 SMC Corporation All rights reserved.

1 Information SMC Corporation Akihabara UDX 5F, 4-4-, Sotokanda, Chiyoda-ku, Tokyo -, JAPAN URL 6 SMC Corporation All rights reserved. 5-EU58-UK Issued: January, 6 D-KS P-(KS) Serial Transmission System Serial Wiring with Input/Output Unit Series EX5 ControlNet Series SV// ControlNet Adapter class Cycle I/O Message, CIP Message, UCMM BNC connector Network Update Time (NUT) = Minimum value ms Connector connection Connection style allows for easy mounting and saves space. Number of inputs/outputs points Series VQC//4 Input/output points are available. Compatible with NPN/PNP sensors Both NPN and PNP sensors can be connected to the SI unit using an SMC input block. Input connector: M8/M The input block has M8/M type connectors for sensor connections. Function of HOLD/CLEAR of output Able to HOLD/CLEAR the output in case an error occurs. Applicable valve manifold Series SV// Series VQC//4 The EX5 series accepts the protocols listed below. DeviceNet PROFIBUS-DP CC-Link AS-i, 8 in/8 out, slave modes, power supply systems AS-i, 4 in/4 out, slave modes, power supply systems AS-i, 8 in/8 out, slave modes, power supply system AS-i, 4 in/4 out, slave modes, power supply system CANopen Contact SMC if your SI unit specification is an AS-I power supply system since the current from this power supply is limited.

2 Serial Wiring with Input/Output Unit Series EX5 ControlNet Series SV// (M8: 4 inputs, stations) Series VQC//4 Specifications Item Applicable system Address setting range Communication speed Network update time (NUT) Data amount Number of nodes Applicable message Redundant media Enclosure Weight Power supply voltage Current consumption Note ) Input specifications Output specifications Power supply for SI unit and input block Power supply for output equipment Number of inputs Input type Input equipment connection supply Voltage Block supply Voltage Number of outputs Output type Output equipment connection Residual voltage Load current Note ) Specifications ControlNet Version. Errata adapter class to 99 (Rotary switch setting) Fixed 5 Mbps Minimum ms Maximum 5 byte 99 Implicit message/cip message Not supported IP4 5 g or less 4 V DC ±% +% 4 V DC 5% Maximum ma inputs TTL 4 V DC ±% Total maximum A outputs N-ch MOS-FET Hi-side switch (PNP output) Solenoid valve (4 V DC,.5 W or less, with light/surge voltage suppressor). V or less Total maximum A Note ) Current consumption of the internal power supply of the SI unit Note ) Maximum load current that is supplied from the power supply for output devices. Input equipment Model EX5-IE EX5-IE EX5-IE Note M connector, inputs M connector, 4 inputs M8 connector, 4 inputs (M8: 4 inputs, stations) Item Model Number of inputs Input connector Applicable sensor Power supply voltage Sensor supply current Short circuit protection Specification EX5-IE EX5-IE EX5-IE inputs M 4 inputs M 4 inputs M8 Current source type (PNP output), Current sink type (NPN output) Note ) 9. to 8.8 V DC Note ) ma/input block ( ma/sensor) Fuse blows when more than 5 ma is supplied from each input block Note ) Enables switching with a selecter Note ) A voltage drop of approximately V may occur in the power supply voltage for the SI unit/input block.

3 Serial Wiring with Input/Output Unit Series EX5 Dimensions SI unit A PWR PWR(V) PWR SELECT SI UNIT ADDRESS A X MS X EX5-IE EX5 59.8

4 Series EX5 Dimensions EX5-IE EX EX5-IE EX

5 5

6 EX5 with Input/Output Unit Serial Wiring Series SV ControlNet How to Order SS5V SZCN D 5 U Series SV SV SV SI unit specification ZCN ControlNet (IP4) stations - None station 8 8 stations Mounting - Direct mount DIN rail mount D (With DIN rail) Note) DIN rail mount D (Without DIN rail) D D For stations For stations If a DIN rail longer than the specified number of stations is required, then specify a rail longer than the standard length. common specification/ - N N N type Without input block +COM/M: inputs +COM/M: 4 inputs +COM/M8: 4 inputs ( pins) COM/M: inputs COM/M: 4 inputs COM/M8: 4 inputs ( pins) Note) For D, only DIN rail fittings are attached. Stations Symbol 6 Stations Stations 6 Stations Stations Stations Note Double wiring specifications Note ) Specified layout Note ) (Up to solenoids possible.) Note) Double wiring specification: Single, double, position and 4 position solenoid valves can be used on all manifold stations. Use of a single solenoid will result in an unused control signal. If this is not desired, order with a specified layout. Note) Specified layout: Indicate wiring specifications on a manifold specification sheet. (Note that double, position and 4 position valves cannot be used where single solenoid wiring has been specified.) - S R RS U D B Ports,, 5 position U side ( to stations) D side ( to stations) Both sides ( to stations) Supply/Exhaust block assembly specification Internal pilot specification Internal pilot specification/built-in silencer External pilot specification External pilot specification/built-in silencer 6 A, B port size (Metric) Symbol A, B port C ø. One-touch fitting C4 ø4 One-touch fitting C6 ø6 One-touch fitting C4 ø4 One-touch fitting C6 ø6 One-touch fitting C8 ø8 One-touch fitting C6 ø6 One-touch fitting C8 ø8 One-touch fitting C ø One-touch fitting M A, B ports mixed P, E port ø8 One-touch fitting ø One-touch fitting ø One-touch fitting Applicable series SV SV SV A, B port size (Inch) Symbol A, B port N ø/8" One-touch fitting N ø5/" One-touch fitting N7 ø/4" One-touch fitting N ø5/" One-touch fitting N7 ø/4" One-touch fitting N9 ø5/6" One-touch fitting N7 ø/4" One-touch fitting N9 ø5/6" One-touch fitting N ø/8" One-touch fitting M A, B ports mixed P, E port ø5/6" One-touch fitting ø/8" One-touch fitting Applicable series SV SV SV If you require a mixed specification (M), indicate separately on a manifold specification sheet. The port sizes of the X and PE ports for the external pilot specification (R, RS) are ø4 (metric) or ø5/" (inch) for Series SV and, and ø6 (metric) or ø/4" (inch) for Series SV.

7 EX5 with Input /Output Unit Serial Wiring Series SV How to Order Solenoid Valves SV 5 F Note) Note) Available with manifold block for station addition. Refer to series SV in SMC's Best Pneumatics catalogue. Series SV SV SV Manual override indicator -: Nonlocking push type D: Slotted locking type 4 5 A B C Type of actuation position single solenoid position double solenoid position closed centre position exhaust centre position pressure centre 4 position dual port valve: N.C./N.C. 4 position dual port valve: N.O./N.O. 4 position dual port valve: N.C./N.O. 4 position dual port valves are applicable to series SV and SV only. Light/Surge voltage suppressor U R With Light/Surge voltage suppressor With Surge voltage suppressor Pilot specification - Internal pilot R External pilot External pilot specification is not available for 4 position dual port valves. Rated voltage 5 4 V DC Back pressure check valve - None K Built-in Built-in back pressure check valve type is applicable to series SV only. Back pressure check valve is not available for position closed centre and position pressure centre. For solenoid valve specifications and dimensions, please refer to series SV in SMC's Best Pneumatics catalogue. Please refer to pages to 4 for each single SI unit and Input block dimensions. Please refer to the technical instruction manual. How to Order Valve Manifold Assembly (Example: With Input Block) Example (SV) Manifold SS5V-SZCNND-6B-C6 ( set) SS5V-SZCNND-6B-C6 set (Manifold part no.) SV-5FU 6 set (Single solenoid part no.) Single solenoid (M8: 4 inputs, stations) 7

8 Series VQC/ Base mounted Plug-in Unit How to Order Manifold This How to Order section is only for manifolds that are used for ControlNet VV5QC Stations station 4 4 staions Symbol C C4 C6 C8 M5 CM Series VQC VQC Manifold Plug-in unit Note) The standard wiring specification is for double wiring, and it has a maximum of stations. When the special wiring specification (Option symbol K ) is selected, the maximum number of stations is 4 Cylinder ports 8 C6 SDZCN Cylinder ports ø. One-touch fitting ø4 One-touch fitting ø6 One-touch fitting ø8 One-touch fitting M5 thread Mixed size/with port plug L L4 L6 L8 L5 B B4 B6 B8 B5 LM Top ported elbow ø. One-touch fitting Top ported elbow ø4 One-touch fitting Top ported elbow ø6 One-touch fitting Top ported elbow ø8 One-touch fitting Bottom ported elbow M5 thread Bottom ported elbow ø. One-touch fitting Bottom ported elbow ø4 One-touch fitting Bottom ported elbow ø6 One-touch fitting Bottom ported elbow ø8 One-touch fitting Bottom ported elbow M5 thread Mixed size for elbow piping Note ) Indicate the size in the manifold specification sheet for CM and LM. Note ) Symbol for size in inches. VQC: N:ø/8" N:ø5/" N7:ø/4" NM:Mixed VQC: N:ø5/" N7:ø/4" N9:ø5/6" NM:Mixed Insert LN (top piping) or BN (bottom piping) for elbow type. N Option - B D D K N R S T None All stations with a back pressure check valve Note ) With DIN rail (Rail length: Standard) With DIN rail (Rail length: Special) Note ) Special wiring specifications (Except for double wiring) Note 4) With name plate External pilot Direct exhaust with built-in silencer Note 5) Branched U side P, R ports Note 6) Note ) When specifying more than one option, enter symbols in alphabetical order. Example: -BRS Note ) When using the back pressure check valve for the necessary stations only, enter the back pressure check valve part no. and indicate the number of manifold stations in the manifold specification sheet. Note ) For special DIN rail lengths, indicate D (Enter the number of stations in place of ). Example: -D8 In this case, stations will be mounted on a DIN rail for 8 stations regardless of the actual number of manifold stations. Indicate -D for the option without DIN rail. Assuming one point for single wiring and two points for double wiring, determine the number of stations that can be used so that the total number of points is not greater than 4. Note 4) Be sure to indicate the wiring specifications in the manifold specification sheet. Note 5) The built-in silencer type does not satisfy the IP67 standard. Note 6) The supply and exhaust ports on the U side are branched (to the cylinder port side and coil side). A One-touch fitting for ø is attached to each port. (VQC only) COM. - PNP or without input block N NPN 8 Kit type: Serial unit EX5 SDZCN ControlNet SI unit COM. N COM. Number of input blocks - 8 Without SI unit/input block (SD) Without input block With input block With 8 input blocks type - Without input block M: inputs M: 4 inputs M8: 4 inputs

9 Series VQC Base mounted Plug-in Unit How to Order Valve VQC N 5 Series VQC VQC Type of actuation Light/Surge voltage Suppressor - With Manual override -: Nonlocking push type (Slotted) 4 5 position single position double (Metal) position double (Rubber) position closed centre position exhaust centre position pressure centre 4 position dual port valve (A) 4 Note) A 5 N.C N.C 4 position dual port valve (B) 4 Note) B 5 N.O N.O 4 position dual port valve (C) 4 Note) C 5 N.C N.O Note) For rubber seal type only. Seal Metal seal Rubber seal Coil voltage 5 4 V DC Function Note) - Standard type (W) K Note ) High voltage type (.MPa) N Note ) Negative COM R Note 5) External pilot Y Low wattage type (.5W) Note ) For metal seal type only. Note ) When specifying more than one option, enter symbols in alphabetical order. Note ) Not applicable for 4 position dual port valves. Note 4) If the total energised time in 4 hours is longer than the total de-energised time, please choose the low wattage type. Note 5) Please use negative common valves for manifold valves that are used with ControlNet B: Locking type (Slotted) C: Locking type (Manual) D: Slide locking type (Manual) Kit type S Kit (I/O serial transmission kit) For solenoid valve specifications and dimensions, please refer to series VQC in SMC's Best Pneumatics catalogue. Please refer to pages to 4 for each single SI unit and Input block dimensions. Please refer to the technical instruction manual. Serial unit: EX5 IP67 protection SDZCN ControlNet How to Order Valve Manifold Assembly (Example: With ) Example (VQC) Manifold VV5QC-6C6SDZCNNN ( set) VV5QC-6C6SDZCNNN set (Manifold part no.) VQCN-5 6 set ( position double solenoid part no.) position double solenoid (M8: 4 inputs, stations) 9

10 Series VQC4 Base mounted Plug-in Unit How to Order Manifold This How to Order section is only for manifolds that are used for ControlNet. VV5QC 4 8 SDZCN N Series 4 VQC4 Manifold Plug-in unit Stations station 6 6 stations Note) The standard wiring specification is for double wiring, and it has a maximum of stations. When the special wiring specification (Option symbol K ) is selected, the maximum number of stations is 6. Symbol C8 C C B CM Cylinder port size Cylinder port ø8 One-touch fitting ø One-touch fitting ø One-touch fitting Rc /4 Rc /8 Bottom ported Rc /4 Mixed Note ) Indicate the size in the manifold specification sheet in the case of CM. Note ) Symbol for size in inches. N7: ø/4" N9: ø5/6" N: ø/8" NM: Mixed Thread type - Rc N NPT T NPTF F G Kit type: Serial unit EX5 SDZCN ControlNet Number of input blocks - Without SI unit/input block (SD) Without input block With input block 8 COM. - PNP or without input block N NPN type - Without input block M: inputs M: 4 inputs M8: 4 inputs With 8 input blocks Note ) Option - None Special wiring specification K (Except for double wiring) Note ) N Name plate Built-in silencer, S direct exhaust Note ) Note ) When specifying more than one option, enter symbols in alphabetical order. Example: -KN Assuming one point for single wiring and two points for double wiring, determine the number of stations that can be used so that the total number of points is not greater than 4. Note ) Be sure to indicate the wiring specifications in the specification manifold sheet. Note ) The built-in silencer type does not satisfy the IP67 standard. SI unit COM. N COM.

11 Series VQC Base mounted Plug-in Unit VQC 4 5 Series 4 VQC4 Type of actuation position single position double (Metal) How to Order Valve Light /Surge voltage Suppressor - With E Without light/surge voltage suppressor Manual override -: Nonlocking push type (Slotted) position double (Rubber) Coil voltage 5 DC4 V B: Locking type (Slotted) 4 5 position closed centre position exhaust centre position pressure centre Function - Standard type ( W) R External pilot Y Low wattage type (.5 W) Note ) When specifying more than one option, enter symbols in alphabetical order. Note ) In case the total energised time 4 hours is longer than the be-energised time, please choose the low wattage type. 6 position double check EA P EB Seal Metal seal Rubber seal Kit type S Kit (I/O serial kit) For solenoid valve specifications and dimensions, please refer to series VQC in SMC's Best Pneumatics catalogue. Please refer to pages to 4 for each single SI unit and Input block dimensions. Please refer to the technical instruction manual. Serial unit: EX5 IP67 protection SDZCN ControlNet How to Order Valve Manifold Assembly (Example: With input block) Example (VQC4) Manifold VV5QC4-6SDZCNNN ( set) VV5QC4-6SDZCNNN set (Manifold part no.) VQC4-5 6 set ( position double solenoid part no.) position double solenoid (M8: 4 inputs, stations)

12 DiskArt 988 EUROPEAN SUBSIDIARIES: Austria SMC Pneumatik GmbH (Austria). Girakstrasse 8, A- Korneuburg Phone: , Fax: France SMC Pneumatique, S.A., Boulevard de Strasbourg, Parc Gustave Eiffel Bussy Saint Georges F-7767 Marne La Vallee Cedex Phone: + ()-6476, Fax: + () contact@smc-france.fr Netherlands SMC Pneumatics BV De Ruyterkade, NL- AB Amsterdam Phone: + ()-58888, Fax: + () info@smcpneumatics.nl Spain SMC España, S.A. Zuazobidea 4, 5 Vitoria Phone: , Fax: post@smc.smces.es Belgium SMC Pneumatics N.V./S.A. Nijverheidsstraat, B-6 Wommelgem Phone: + () , Fax: + () post@smcpneumatics.be Germany SMC Pneumatik GmbH Boschring -5, D-69 Egelsbach Phone: +49 ()6-4, Fax: +49 () info@smc-pneumatik.de Norway SMC Pneumatics Norway A/S Vollsveien C, Granfos Næringspark N-66 Lysaker Tel: , Fax: post@smc-norge.no Sweden SMC Pneumatics Sweden AB Ekhagsvägen 9-, S-4 7 Huddinge Phone: +46 ()8-6, Fax: +46 () post@smcpneumatics.se Bulgaria SMC Industrial Automation Bulgaria EOOD 6 kliment Ohridski Blvd., fl. BG-756 Sofia Phone: , Fax: office@smc.bg Greece S. Parianopoulus S.A. 7, Konstantinoupoleos Street, GR-855 Athens Phone: + ()-4676, Fax: + () parianos@hol.gr Poland SMC Industrial Automation Polska Sp.z.o.o. ul. Konstruktorska A, PL--67 Warszawa, Phone: , Fax: office@smc.pl Switzerland SMC Pneumatik AG Dorfstrasse 7, CH-8484 Weisslingen Phone: +4 ()5-96-, Fax: +4 () info@smc.ch Croatia SMC Industrijska automatika d.o.o. Crnomerec, ZAGREB Phone: , Fax: office@smc.hr Hungary SMC Hungary Ipari Automatizálási Kft. Budafoki ut 7-, H-7 Budapest Phone: , Fax: office@smc-automation.hu Portugal SMC Sucursal Portugal, S.A. Rua de Engº Ferreira Dias 45, 4-46 Porto Phone: , Fax: postpt@smc.smces.es Turkey Entek Pnömatik San. ve Tic Ltd. Sti. Perpa Tic. Merkezi Kat: No: 65, TR-87 Okmeydani Istanbul Phone: +9 ()--5, Fax: +9 () smc-entek@entek.com.tr Czech Republic SMC Industrial Automation CZ s.r.o. Hudcova 78a, CZ-6 Brno Phone: , Fax: office@smc.cz Ireland SMC Pneumatics (Ireland) Ltd. Citywest Business Campus, Naas Road, Saggart, Co. Dublin Phone: +5 ()-4 9, Fax: +5 () sales@smcpneumatics.ie DiskArt Romania UK SMC Romania srl SMC Pneumatics (UK) Ltd Str Frunzei 9, Sector, Bucharest Vincent Avenue, Crownhill, Milton Keynes, MK8 AN Phone: +4 5, Fax: Phone: +44 ()8 89 Fax: +44 () smcromania@smcromania.ro sales@smcpneumatics.co.uk Denmark SMC Pneumatik A/S Knudsminde 4B, DK-8 Odder Phone: , Fax: smc@smc-pneumatik.dk Italy SMC Italia S.p.A Via Garibaldi 6, I-6Carugate, (Milano) Phone: +9 ()-97, Fax: +9 () mailbox@smcitalia.it Russia SMC Pneumatik LLC. 4B Sverdlovskaja nab, St. Petersburg 959 Phone.: , Fax: info@smc-pneumatik.ru Estonia SMC Pneumatics Estonia OÜ Laki -, 6 Tallinn Phone: +7 ()6 5954, Fax: +7 () smc@smcpneumatics.ee Latvia SMC Pneumatics Latvia SIA Smerla -75, Riga LV-6, Latvia Phone: , Fax: info@smclv.lv Slovakia SMC Priemyselná Automatizáciá, s.r.o. Námestie Martina Benku, SK-87 Bratislava Phone: , Fax: office@smc.sk Finland SMC Pneumatics Finland OY PL7, Tiistinniityntie 4, SF- ESPOO Phone: , Fax: smcfi@smc.fi Lithuania SMC Pneumatics Lietuva, UAB Savanoriu pr. 8, LT-54 Vilnius, Lithuania Phone: , Fax: Slovenia SMC industrijska Avtomatika d.o.o. Grajski trg 5, SLO-86 Zuzemberk Phone: Fax: office@smc-ind-avtom.si OTHER SUBSIDIARIES WORLDWIDE: ARGENTINA, AUSTRALIA, BOLIVIA, BRASIL, CANADA, CHILE, CHINA, HONG KONG, INDIA, INDONESIA, MALAYSIA, MEXICO, NEW ZEALAND, PHILIPPINES, SINGAPORE, SOUTH KOREA, TAIWAN, THAILAND, USA, VENEZUELA SMC CORPORATION Akihabara UDX 5F, 4-4-, Sotokanda, Chiyoda-ku, Tokyo -, JAPAN Phone: FAX: st printing KT printing KT UK Printed in Spain Specifications are subject to change without prior notice and any obligation on the part of the manufacturer.

Information. Serial Wiring 5 Port Solenoid Valve for EX510. Series VQ1000/2000. Manifold Variations. Series VQ VQ1000 VQ2000

Information. Serial Wiring 5 Port Solenoid Valve for EX510. Series VQ1000/2000. Manifold Variations. Series VQ VQ1000 VQ2000 Information Serial Wiring Port Solenoid Valve for EX0 Series VQ000/000 Manifold Variations Akihabara UDX F, --, Sotokanda, Chiyoda-ku, Tokyo 0-00, JAPAN URL http://www.smcworld.com 006 Corporation All