RS308-PV-3E Midget Fuse

Transcription

1 RS308-PV-3E Series V Midget Fuse SJ1038 Clip Conform to IEC60269 & UL2579 & GB13539 Rated Voltage: DC1000V (L/R=1~3ms), C1000V (COSΦ 0.5) Rated Current: 1~25 Protection: IEC gpv (General PV Protection) & UL PV Interrupting Rating: please refer to table below TUV,CE,CGC,ROHS Compliant Clip Mounting vailable Fuse Holder TS1038 vailable Fast acting general current limitation fuse, able to protect PV battery systems, batteries and other applicable circuits. No Model Size Current Prearc I²t 10k Interrupt 1000VDC L/R=1~3ms eight g 1 RS308-PV-3E RS308-PV-3E RS308-PV-3E RS308-PV-3E RS308-PV-3E5 Fig RS308-PV-3E ±5% RS308-PV-3E RS308-PV-3E RS308-PV-3E RS308-PV-3E RS308-PV-3E k RS308-PV-3E k Voltage Current No Model Size eight V g 0.8I n I n 1 SJ1038 Fig ±10% Suit Φ10 fuse, any length Fuse Size Fig 1 SJ1038 Fuse Clip Fig 2 38 ± ±0.5 φ1 0.3± ±0.2 11±0.2 Version 3 1

2 RS308-PV-3E/EB/EC Series V Pinned Fuses Conform to IEC60269 & UL2579 & GB13539 Rated Voltage: DC1000V (L/R=1~3ms), C1000V (COSΦ 0.5) Rated Current: 1~25 Protection: IEC gpv (General PV Protection) & UL PV Interrupting Rating: please refer to table below TUV,CE,CGC,ROHS Compliant Three mounts: 3E--Single Pole, eldable 3EB--Double Pole, eldable 3EC--L-Slot, Screw Mount Fast acting general current limitation fuse, able to protect PV battery systems, batteries and other applicable circuits. No 3E Single Pin (Size 1) 3EB Double Pin (Size 2) 3EC Stud-Mount (Size 3) Current Prearc I²t 10k 1 RS308-PV-3E1 RS308-PV-3EB1 RS308-PV-3EC RS308-PV-3E2 RS308-PV-3EB2 RS308-PV-3EC RS308-PV-3E3 RS308-PV-3EB3 RS308-PV-3EC RS308-PV-3E4 RS308-PV-3EB4 RS308-PV-3EC RS308-PV-3E5 RS308-PV-3EB5 RS308-PV-3EC RS308-PV-3E6 RS308-PV-3EB6 RS308-PV-3EC RS308-PV-3E8 RS308-PV-3EB8 RS308-PV-3EC RS308-PV-3E10 RS308-PV-3EB10 RS308-PV-3EC RS308-PV-3E12 RS308-PV-3EB12 RS308-PV-3EC RS308-PV-3E15 RS308-PV-3EB15 RS308-PV-3EC RS308-PV-3E20 RS308-PV-3EB20 RS308-PV-3EC k RS308-PV-3E25 RS308-PV-3EB25 RS308-PV-3EC k 3.9 IR 3E Single Pin Size 1 3EB Double Pin Size 2 (9.5) 40±0.6 (9.5) 7 (9.9) 40.5±0.6 (9.9) EC Stud-Mount Size ±1 6 40± ±1 6 Version 3 2

3 RS308-PV-3E/EB/EC Series V Pinned Fuses Time-Current DC Limitation 1000VDC,L/R=2ms,Typical Testing Data Rated Prospect Peak Let-Thru Prospect Peak Let-Thru Comment 4 10, , , , , , , , , , Pure silver conductor, fast acting, low Jouls, corrosion proof and long service life. Superior corundum ceramic has excellent mechanical and breakdown strength performance, thermal shock resistance up to 800K, safe and reliable. Version 3 3

4 TS1038 Fuse Holder TS1038 Fuse Holder (Mount as Module) Conform to IEC60269 & IEC60947 & GB13539 & UL2579 Rated Voltage: 1000VDC & 800VC & 690VC Rated Current: & 1000VDC Housing Thermal Resistance: UL94V-0 DIN Rail Size: TH35/7.5 TUV,CE,CGC and RoHS Compliant Suitable for φ10*38 Cylindrical Fuse Terminal Torque: 1.7N.m (14.75IN.LBS)~2.0N.m (17.7IN.LBS) Copper Conductor Cross Section: 2.5~10mm 2 (14~6G) Model Multi-Poles Poles Single Short Double Triple Double Triple Connect Indicator ithout ith ithout ith Model TS1038 TS1038-Z TS TS TS1038-Z2 TS1038-Z3 TS1038-D Size Conditions Fuses can be safely used in the following conditions. Please contact us if unsure. mbient: -25 ~ 80 Housing withstand: -25 ~120 Indicator: -25 ~95 mbient Temperature -- Rated Current Derating: mbient < Derating Storage Temp: -25 ~ 40 ltitude: not exceeding 2000m If altitude exceeds 2000m, voltage derating is required. For m,voltage should be 10% derated for each 1000m higher. tmosphere: clean air, RH below 50% at 60. t lower temperature, RH can be higher. E.g. RH can be 90% at 20. Due to temperature variation, certain extent of dewing might occur. arning: 1.Not designed for onload operation. 2.Ensure polarity is correct! Otherwise loop may be formed and resulting voltage superimposition. If voltage exceeds rated value, capability of fuse to interrupt current would be set back. Storage RH: 90% Version 3 4

5 TS1038 Fuse Holder TS1038 Fuse Holder - Mounting Instructions Instructions 1.Release Pusher 2. Lock onto Rail 3.Install Fuse 4. Dismount Holder Note: be gentle while handling. If pusher is fractured, remove holder from rail end, or press down pusher from rear to release. Version 3 5