STANDARD PRODUCTS CATALOG
|
|
- Amberlynn Hancock
- 5 years ago
- Views:
Transcription
1 STANDARD PRODUCTS CATALOG 1 NO. 1 SUMMER 01
2 We are not limited to the enclosed items. We have the ability to custom fabricate products to meet your needs. A few of the items we also fabricate are: Pipe Straps Custom Flanges Custom Pipe Supports Custom Pipe Spools Contact us for a quote or with any questions about our products and our capabilities. We will work with you to get you what you need, when you need it. Contact Us at: SH Engineering & Mfg LLC 51 West Bud Rd Maricopa, AZ 859 (50) atlas@shengmfg.com Also, please visit us at shengmfg.com for more information. This drawing and information within is proprietary property of Atlas Piping Products and may not be
3 Table of Contents Adjustable Pipe Supports (APS)... APS-Base... APS-Saddle... APS-U-Bolt... APS-Clamp... APS-Flange... APS-Valve... APS Assemblies Wall Sleeve (WS) Offset Pipe Clamp (OPC)... 1 Three Hole Restraint Lug (HRL)... 1 Wall Bracket Support (WBS)... Lightweight WBS-A... Horizontal WBS-B... Horizontal WBS-C... Horizontal WBS-D... Vertical WBS-B... Vertical WBS-C... Vertical WBS-D Valve Stem Extension (VSE)... 1 T-Handle Valve Key (T-Handle)... This drawing and information within is proprietary property of Atlas Piping Products and may not be
4 Base for Adjustable Pipe Supports APS-BASE Size Range: -1/" - 6" Pipe Material: A6 Carbon Steel, 04 & 16 Stainless Steel Service: Provides up to 5" of vertical adjustment. Ordering: Specify, Material, Finish, and Stanchion Pipe length or center line of pipe and OD of pipe if also ordering top support Threaded Nipple (1" long w/ 6" of threads) Threaded Adapter Stanchion Pipe Base Plate Nom. Pipe Size Stanchion Nipple Threaded Adapter Base Plate Holes APS-BASE-B -1/"-4" " SCH 40 " SCH 40 " SCH 40 /8x10x10 5/8" APS-BASE-C 6"-1" -1/" SCH 40-1/" SCH 40-1/" SCH 40 1/x1x1 /4" APS-BASE-D 14"-16" 4" SCH 40 " SCH 40 " SCH 40 1/x1x1 /4" APS-BASE-E 18"-6" 6" SCH 40 4" SCH 40 4" SCH 40 1/x16x16 /4" This drawing and information within is proprietary property of Atlas Piping Products and may not be 4
5 APS-SADDLE Typical Saddle Support Size Range: -1/" - 6" Pipe Material: A6 Carbon Steel, 04 & 16 Stainless Steel Service: Provides vertical support for horizontal pipe Approvals: Complies with Federal Specification A-A-119A Type 8, WW-H-171-E Type 9, ANSI/MSS SP-69 and MSS SP-58 Type 8 Ordering: Specify, Material, Finish, and exact Outside Diameter of pipe Pipe Saddle Gusset Nipple Sleeve Nom. Pipe Size Pipe Saddle Gusset Nipple Sleeve APS-SADDLE-B -1/"-4" 1/4"x" - -1/" SCH 40 APS-SADDLE-C 6"-1" 1/4"x4" 1/4" " SCH 80 APS-SADDLE-D 14"-16" 1/"x4" /8" -1/" SCH 40 APS-SADDLE-E 18"-6" /4"x6" 1/" 5" SCH 40 This drawing and information within is proprietary property of Atlas Piping Products and may not be 5
6 Saddle Support w/ U-Bolt APS-U-BOLT Size Range: -1/" - 6" Pipe Material: A6 Carbon Steel, 04 & 16 Stainless Steel Service: Provides vertical support for horizontal pipe with extra stability by U-bolt Approvals: Complies with Federal Specification A-A-119A Type 8, WW-H-171-E, ANSI/MSS SP-69 and MSS SP-58 Type 7 Ordering: Specify, Material, Finish, and exact Outside Diameter of pipe U-Bolt Pipe Saddle Gusset Nipple Sleeve Nom. Pipe Size Pipe Saddle Gusset Nipple Sleeve U-Bolt APS-U-BOLT-B -1/"-4" 1/4"x" - -1/" SCH 40 /8 APS-U-BOLT-C 6"-1" 1/4"x4" 1/4" " SCH 80 1/ APS-U-BOLT-D 14"-16" 1/"x4" /8" -1/" SCH 40 5/8 APS-U-BOLT-E 18"-6" /4"x6" 1/" 5" SCH 40 /4 This drawing and information within is proprietary property of Atlas Piping Products and may not be 6
7 Saddle Support w/ Clamp APS-CLAMP Size Range: -1/" - 6" Pipe Material: A6 Carbon Steel, 04 & 16 Stainless Steel Service: Provides vertical support for horizontal pipe with extra stability by pipe clamp Approvals: Complies with Federal Specification A-A-119A Type 8, WW-H-171-E Type 9, ANSI/MSS SP-69 and MSS SP-58 Type 8 Ordering: Specify, Material, Finish, and exact OD of pipe Clamp Bolt w/ Nut & Washer Nipple Sleeve Nom. Pipe Size Nipple Sleeve Clamp Hardware APS-CLAMP-B -1/"-4" -1/" SCH 40 1/4"x-1/" /8 APS-CLAMP-C 6"-1" " SCH 80 1/4"x" 1/ APS-CLAMP-D 14"-16" -1/" SCH 40 /8 x4 1/ APS-CLAMP-E 18"-6" 5" SCH 40 /8 x6 1/ This drawing and information within is proprietary property of Atlas Piping Products and may not be 7
8 APS-FLANGE Flange Support Size Range: -1/" - 6" Pipe Material: A6 Carbon Steel, 04 & 16 Stainless Steel Service: Provides vertical support for horizontal flange Ordering: Specify, Material, Finish, Flange size, Pipe OD, and Bolt pattern (150#, 00# etc.) Angle Holes to match Flange Nipple Sleeve Flange Size Nipple Sleeve Angle APS-FLANGE-B -1/"-4" -1/" SCH 40 4 x4 x1/4 APS-FLANGE-C 6"-1" " SCH 80 6 x6 x1/4 APS-FLANGE-D 14"-16" -1/" SCH 40 6 x6 x/8 APS-FLANGE-E 18"-6" 5" SCH 40 6 x6 x/8 This drawing and information within is proprietary property of Atlas Piping Products and may not be 8
9 APS-VALVE Valve Support Size Range: -1/" - 6" Pipe Material: A6 Carbon Steel, 04 & 16 Stainless Steel Service: Provides vertical support for valve Ordering: Specify, Material, Finish, Flange size, Pipe OD, and Bolt pattern (150#, 00# etc.) Support Plate Nipple Sleeve Valve Size Nipple Sleeve Support Plate APS-VALVE-B -1/"-4" -1/" SCH 40 6 x6 x1/ APS-VALVE-C 6"-1" " SCH 80 6 x6 x1/ APS-VALVE-D 14"-16" -1/" SCH 40 6 x6 x1/ APS-VALVE-E 18"-6" 5" SCH 40 6 x6 x1/ This drawing and information within is proprietary property of Atlas Piping Products and may not be 9
10 Adjustable Pipe Support Assemblies APS Assemblies Size Range: SUPPORT TYPE B - E Material: A6 Carbon Steel, 04 & 16 Stainless Steel Service: Provides vertical support pipe, flanges, and valves Ordering: Order by separate parts or by assembly. Specify (s), Material, Finish, Flange size, Pipe OD, and either Centerline or Bottom of pipe (CL or BOP) dimension. Submittal provided upon request. APS-SADDLE APS-UB APS-CL APS-FLG APS-VOP APS-BASE APS-SAD Pipe Size Pipe Size Pipe Size Pipe Size Pipe Size APS-SAD-B -1/"-4" APS-UB-B -1/"-4" APS-CL-B -1/"-4" APS-FLG-B -1/"-4" APS-FLG-B -1/"-4" APS-SAD-C 6"-1" APS-UB-C 6"-1" APS-CL-C 6"-1" APS-FLG-C 6"-1" APS-FLG-C 6"-1" APS-SAD-D 14"-16" APS-UB-D 14"-16" APS-CL-D 14"-16" APS-FLG-D 14"-16" APS-FLG-D 14"-16" APS-SAD-E 18"-6" APS-UB-E 18"-6" APS-CL-E 18"-6" APS-FLG-E 18"-6" APS-FLG-E 18"-6" This drawing and information within is proprietary property of Atlas Piping Products and may not be 10
11 WS Standard Wall Sleeve Size Range: " - 60" Pipe Material: A6 Carbon Steel, 04 & 16 Stainless Steel Service: Wall/Floor sleeve with continuously welded seep ring Ordering: Specify, Material, Finish, and Dimensions A & B Nom. Pipe Size Nom. Pipe Size WS WS / WS-0 0 WS-4 4 WS- WS- WS WS-4 4 WS-4 4 WS WS-5 5 WS-6 6 WS WS-6 6 WS-8 8 WS WS-8 8 WS-0 0 WS-5 5 WS WS- WS WS-1 1 WS-4 4 WS WS WS-6 6 WS WS WS-8 8 WS WS-.5 WS- Nom. Pipe Size This drawing and information within is proprietary property of Atlas Piping Products and may not be 11
12 Standard Offset Pipe Clamp OPC Size Range: " - 6" Pipe Material: A6 Carbon Steel, 04 & 16 Stainless Steel Service: Designed to support pipe that runs a fixed distance from the wall or floor Ordering: Specify, Material, Finish, Height, and Pipe OD Pipe Size (A) IPS Diameter (A) DIP Diameter (B) Width (C) Thickness (D) Bolt Size OPC /16 /8 OPC /16 /8 OPC /4 /8 OPC / /8 1/ OPC / /8 1/ OPC /8 5/8 OPC /8 5/8 OPC /8 5/8 OPC / 5/8 OPC / 5/8 OPC / /4 OPC / /4 OPC / /4 This drawing and information within is proprietary property of Atlas Piping Products and may not be 1
13 Standard -Hole Restraint Lug HRL Size Range: " - 48" Pipe Material: A6 Carbon Steel, 04 & 16 Stainless Steel Service: Three hole restraint lug for 15#/150# flange Ordering: Specify, Material, Finish, and Length of Tie-Rod (if also ordering tie rod) -Hole Restraint Lug Recommendation Maximum Pressure Flange Size 50 PSI 100 PSI 150 PSI 00 PSI 75 PSI Tie-Rod Size Lug Thickness HRL- 5/8 /4 HRL- 5/8 /4 HRL-4 4 5/8 /4 HRL-6 6 /4 /4 HRL-8 8 /4 /4 HRL /4 1 HRL-1 1 7/8 1 HRL /8 1 HRL /8 1 HRL /8 1 HRL /8 1 HRL /8 1 HRL /8 1-1/4 HRL /4 1-1/4 HRL /4 1-1/4 HRL /4 1-1/4 HRL /4 1-1/4 HRL /4 1-1/ This drawing and information within is proprietary property of Atlas Piping Products and may not be 1
14 LWBS-A Lightweight Wall Bracket Support Size Range:.5 - Pipe Material: A6 Carbon Steel, 04 & 16 Stainless Steel Service: Provides support for horizontal pipe up to Approvals: Complies with Federal Specification A-A-119A Type 1, WW-H-171-E Type, MSS SP-69 Ordering: Specify, Material, and Finish This drawing and information within is proprietary property of Atlas Piping Products and may not be 14
15 HWBS-B Horizontal Wall Bracket Support Size Range: Pipe Material: A6 Carbon Steel, 04 & 16 Stainless Steel Service: Provides support for horizontal pipe up to 1. U-bolt and hardware included Approvals: Complies with Federal Specification A-A-119A Type, WW-H-171-E Type 4, MSS SP-69 Type Ordering: Specify, Material, and Finish, and Pipe Outside Diameter This drawing and information within is proprietary property of Atlas Piping Products and may not be 15
16 HWBS-C Horizontal Wall Bracket Support Size Range: Pipe Material: A6 Carbon Steel, 04 & 16 Stainless Steel Service: Provides support for horizontal pipe up to 18. U-bolt and hardware included. U-bolt slides between angles. Approvals: Complies with Federal Specification A-A-119A Type, WW-H-171-E Type 4, MSS SP-69 Type Ordering: Specify, Material, and Finish, and Pipe Outside Diameter This drawing and information within is proprietary property of Atlas Piping Products and may not be 16
17 HWBS-D Horizontal Wall Bracket Support Size Range: Pipe Material: A6 Carbon Steel, 04 & 16 Stainless Steel Service: Provides support for horizontal pipe up to 6. U-bolt and hardware included Approvals: Complies with Federal Specification A-A-119A Type, WW-H-171-E Type 4, MSS SP-69 Type Ordering: Specify, Material, and Finish, and Pipe Outside Diameter This drawing and information within is proprietary property of Atlas Piping Products and may not be 17
18 VWBS-B Vertical Wall Bracket Support Size Range: Pipe Material: A6 Carbon Steel, 04 & 16 Stainless Steel Service: Provides support for vertical pipe up to 1. Riser clamp included. Weld riser clamp to support. Approvals: Complies with Federal Specification A-A-119A Type, WW-H-171-E Type 4, MSS SP-69 Type Ordering: Specify, Material, and Finish, and Pipe Outside Diameter This drawing and information within is proprietary property of Atlas Piping Products and may not be 18
19 VWBS-C Vertical Wall Bracket Support Size Range: Pipe Material: A6 Carbon Steel, 04 & 16 Stainless Steel Service: Provides support for vertical pipe up to 18. Riser clamp included. Weld riser clamp to support. Approvals: Complies with Federal Specification A-A-119A Type, WW-H-171-E Type 4, MSS SP-69 Type Ordering: Specify, Material, and Finish, and Pipe Outside Diameter This drawing and information within is proprietary property of Atlas Piping Products and may not be 19
20 VWBS-D Vertical Wall Bracket Support Size Range: Pipe Material: A6 Carbon Steel, 04 & 16 Stainless Steel Service: Provides support for vertical pipe up to 6. Riser clamp included. Weld riser clamp to support. Approvals: Complies with Federal Specification A-A-119A Type, WW-H-171-E Type 4, MSS SP-69 Type Ordering: Specify, Material, and Finish, and Pipe Outside Diameter This drawing and information within is proprietary property of Atlas Piping Products and may not be 0
21 VSE Typical Valve Stem Extension Size: - Valve Nut Material: A6 Carbon Steel, 04 & 16 Stainless Steel Service: Extents to operate valve. Dirt Ring prevents dirt from falling to valve. Ordering: Specify, Material, and Finish, Dirt ring or No dirt ring, and Length This drawing and information within is proprietary property of Atlas Piping Products and may not be 1
22 T-HANDLE T-Handle Valve Key Size: - Valve Nut Material: Aluminum, A6 Carbon Steel, 04 & 16 Stainless Steel Service: Fits valve nut Ordering: Specify, Material, Finish, and Length This drawing and information within is proprietary property of Atlas Piping Products and may not be
STANDARD PIPE CLAMP FIG. 520 & 521
Designed to be used in the suspension of non-insulated pipe lines. Normally used in conjunction with Fig. 35 weldless eye nut, Fig. 50 eye rod or Fig. 55 welded eye rod to allow flexibility at the rod
More informationORDERING: Specify size, figure number, description, nominal pipe size or special O.D. and C-to-C dimension. C - C LOAD lb.
Fig. 2110 www.pipingtech.com/fig2110 Sway Strut with 4 of Adjustment Engineered spring supports option 1 option 2 ORDERING: Specify size, figure number, description, nominal pipe size or special O.D. and
More informationHANGERS, STRUT, AND FITTINGS SUBMITTAL
HANGERS, STRUT, AND FITTINGS SUBMITTAL Prepared By: Submitted by: Enter Company Name INTERNATIONAL SEISMIC APPLICATION TECHNOLOGY A Division of Tomarco Contractor Specialties Enter Project Name 4848 Northam
More informationTUF-SKIN VALVES. Universal sales 1~1~2O15. Catalog ~ Price List. UNIVERSAL SALES Booth Street Junction City, OR
Universal sales TUF-SKIN VALVES Catalog ~ Price List 1~1~2O15 MEMBER MANA Manufacturers Agents National Association UNIVERSAL SALES 92311 Booth Street Junction City, OR 97448 www.universalsales.biz Ph:
More informationPipe hanger solutions
Product catalog Middle East offering Pipe hanger solutions for commercial and industrial applications B00 series B00 - Standard clevis hanger Pipe will not pinch when installing. 5 swing in either direction
More informationPipe Repair Products. A complete selection for all types of pipe
Pipe Repair Products A complete selection for all types of pipe Mueller Service Saddles Manufactured and tested in accordance with ANSI/AWWA C800 & NSF 61 certified. Mueller service saddles, available
More informationFord Fabricated Steel Products
Ford Fabricated Steel Products Section N2 12/2000 The Ford Meter Box Co., Inc. 775 Manchester Avenue, P.O. Box 443, Wabash, Indiana, USA 46992-0443 Telephone: 219/563-3171 FAX: 1-800-826-3487 Overseas
More informationHole-cutting. cutting a hole. After the hole has been cut all rough edges must be removed and the area within 5/8 (16mm) of the hole
Mechanical Tees Hole-cutting Shurjoint mechanical tees provide a fast and easy mid-point branch outlet, eliminating the need for welding or the use of multiple fittings. The Model M21 features a female
More informationSECTION PIPE HANGERS AND SUPPORTS
Part I - GENERAL 1.01 SECTION INCLUDES A. The work covered under this section consists of the furnishing of all necessary labor, supervision, materials, equipment, and services to completely execute the
More informationFord Service Saddles and Tapping Sleeves
DQS Inc. Section AA 09/2017 THE FORD METER BOX COMPANY, INC. CERTIFIED TO ISO 9001:2015 10004466 Ford Service Saddles and Tapping Sleeves Contents Recommended Product Application *Steel *C900/909*** Cast
More informationDRAFT August 12, :56 PM
DRAFT August, 04 3:56 PM SERIES 7000/8000 3 PIECE FULL PORT 4-7000 - 36SS 8000 - WCB 7000/8000 SERIES BALL VALVES Flow-Tek s Series 7000 and 8000 ball valves offer the highest flexibility in selection
More informationPipe Hangers, Strut & Accessories
I N D U S T R I E S I N C. Base Price List September 22, 2008 Pipe Hangers, Strut & Accessories Phone 800.243.4844 860.647.1431 Fax 860.647.1160 180 Olcott Street Manchester, CT 06040 w w w. e m p i r
More informationPipe Support Systems & Components. EDITION 3.
Pipe Support Systems & Components 10 899 4 sales@anchoragegroup.com.au www.anchoragegroup.com.au ABOUT ANCHORAGE GROUP ABOUT ANCHORAGE Leading manufacturing company Swift Metal Services designs, manufactures
More informationTG/RB/2M/Web Rev.12/1/16. Pipe Hangers & Devices
TG/RB/2M/Web Rev.12/1/16 Pipe Hangers & Devices Pipe Welcome Hangers to PHD & Devices Manufacturing PHD Manufacturing, Inc. was founded in 1972 by a group of industry veterans with strong management, financial,
More informationFULL COLOR TAB #6 TC 105
FULL COLOR TAB #6 TC 105 SERIES TC 2-STAGE TELESCOPING CYLINDER CONSTRUCTION FEATURES 3 Bore Sizes: 0.75, 1.50 and 2.50 Strokes up to 60 2-Stage Telescoping Space Saving Design 100% Double Action Heavy-Duty
More informationINTRODUCTION SAKETH EXIM
Certificates INTRODUCTION SAKETH EXIM is an Industrial Powerhouse with a dominant presence in Manufacturing and Fabrication of Metal Products used in Pipe Support Systems, HVAC Anti Vibration System and
More informationTransmate. Installation & Operating Manual. Thank you for your purchase of the InsertaValve.
Installation & Operating Manual Thank you for your purchase of the InsertaValve. Please read and understand this operation manual. Our goal is to serve you, our customer. If you have any questions, complaints
More informationFORTUNE BRASS, CARBON, STAINLESS STEEL BALL VALVES
FORTUNE BRASS, CARBON, STAINLESS STEEL BALL VALVES FORGED BRASS BALL VALVES 2-pc Full Port Forged Brass Ball Valve, Packing Gland Design, 600 WOG/150 WSP, MSS-SP-110 CSA, UL, FM, NSF61 and LP Gass Approved
More informationSection N. 09/2017 Web Revision 10/23/2017 THE FORD METER BOX COMPANY, INC. CERTIFIED TO ISO 9001: Ford Fabricated Steel Products
DQS Inc. THE FORD METER BOX COMPANY, INC. CERTIFIED TO ISO 9001:2015 10004466 Section N 09/2017 Web Revision 10/23/2017 Ford Fabricated Steel Products Contents Page Product Numbering System... 3 Information...............................................................
More informationBSM ROTARY GEAR PUMPS
FT. MTD. PUMP B-Series pumps are a good choice for a variety of recirculating, mixing, and transfer applications. Typical pumped liquids include solvents, resins, and petroleum products. These pumps are
More information3 Piece Full Port Ball Valves, 1 /4-12 Wide Selection of End Connections
Bray High Performance ompany Subsidiary of BRY INTERNTIONL, Inc. 3 Piece Full Port Ball Valves, 1 /4-1 Wide Selection of End onnections Series 7000 & Series 8000 Model 7000-31SS Model 8000-WB Flow-Tek
More informationSECTION VALVES
PART 1 GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions Specification Sections, apply to this Section. B. Related Sections:
More informationAncillary Equipment FIG. 222 FIG. 283 FIG /10 ADJUSTABLE PIPE SUPPORT U BOLT (NON GRIPPED) U BOLT (GRIPPED) Material - Carbon Steel.
78 FIG. 222 FIG. 283 FIG. 1 04/ U BOLT (GRIPPED) Nom A C D T L Load 15 21.3 7 28 6 25 37 220 20 26.9 33 6 25 40 220 25 33.7 40 6 25 43 220 32 42.4 53 35 49 545 40 48.3 16 60 35 56 545 50 60.3 16 71 35
More informationP R O D U C T C A T A L O G
A A A T E C H N O L O G Y & SPECIALTIES CO., INC. P R O D U C T C A T A L O G 2017 Feb. 2 www.aaatech.com P R O U D L Y S E R V I N G I N D U S T R Y S I N C E 1 9 7 1 AAA Technology & Specialties Co.,
More information229 B-Line series Pipe Hangers & Supports
accessories offered in this section are designed to reduce installation time. wide range of types and sizes are available for various applications. Materials For maximum loading design, Carbon Steel, Forged
More informationSECTION FACILITY FUEL - NATURAL GAS PIPING AND SYSTEMS
SECTION 23 11 23 PART 1 - GENERAL 1.1 SUMMARY A. Work Included: 1. Fuel Pipe and Pipe Fittings - General 2. Steel Pipe and Fittings, Above Grade 3. Steel Pipe and Fittings, Below Grade 4. Polyethylene
More informationTUF-SKIN VALVE 2008 Catalog ~ Price List
UNIVERSAL SALES TUF-SKIN VALVE 2008 Catalog ~ Price List Effective: 2-1-08 MEMBER MANA Manufacturers Agents National Association We Moved! In February 2008 Universal Sales moved to a new larger location!
More informationEXPANSION JOINT SELECTION GUIDE
EXPANSION JOINT SELECTION GUIDE The proper selection and application of an expansion joint is the determining factor in its operation and life. Improper selection and application will lead to problems
More informationFord Service Saddles and Tapping Sleeves
Section AA 04/2013; web revision 02/2014 Ford Service Saddles and Tapping Sleeves The Ford Meter Box Company, Inc. 775 Manchester Avenue, P.O. Box 443, Wabash, Indiana, USA 46992-0443 Telephone: 260-563-3171
More informationBSM ROTARY GEAR PUMPS
-SERIES FLG. MTD. PUMP PUMP FOOT The BSM -Series pumps are designed to provide quiet and efficient service at standard motor speeds, moderately high pressures. Typical applications are supplying hydraulic
More informationPlease note this is a condensed catalog. For a complete version, contact Velan directly.
Please note this is a condensed catalog. For a complete version, contact Velan directly. VELAN VALVES IN POWER With an installed base covering over 300 nuclear power plants and over 2,000 thermal power
More informationINDUSTRIAL PIPE SUPPORTS CATALOGUE
INDUSTRIAL PIPE SUPPORTS CATALOGUE DATE PUBLISHED: 1/06/2017 BINDER GROUP INDUSTRIAL PIPE SUPPORT CATALOGUE TABLE OF CONTENTS 1. INTRODUCTION... 4 2. QUALITY MANAGEMENT CERTIFICATE... 5 3. PIPE SUPPORT
More informationINSERTA VALVE SLEEVE INSERTA VALVE ASSEMBLY. Valve insertion, simplified MATERIAL SPECIFICATIONS MATERIAL SPECIFICATIONS.
MADE IN U.S.A. Valve insertion, simplified 10-12 installations in cast iron, ductile iron, A/C, PVC C-900 and steel pipe No Loss of Pressure Minimal Water Loss Completion time is less than 2 hours Much
More informationSECTION 5 AMERICAN. Ductile Iron Mechanical Joint Fittings
ECION 5 AMERICAN Ductile Iron Mechanical Joint Fittings he principal standards covering full body mechanical joint fittings are ANI/AWWA C110/A21.10 and ANI/AWWA C111/A21.11. Compact ductile iron fittings
More informationSTANDARD 80 SERIES GUYED TOWER GENERAL USE FEATURES. Phone (309) Fax (309) The Industry Standard
G GUYED TOWERS - 80 STANDARD 80 SERIES GUYED TOWER 80 SERIES GENERAL USE The ROHN Model 80 Guyed Tower is designed with variable sized legs and braces to allow construction to heights of 1000. This tower
More information1.1 PURPOSE A. This section is intended to define the general installation and minimum product requirements for hydronic and steam valves.
Date Description of Change Pages / Sections Modified ID 6/15/16 Entire document - mgl44 PART 1 - INTRODUCTION 1.1 PURPOSE A. This section is intended to define the general installation and minimum product
More informationValves & Flow Control Components Valves & Flow Control Components
Section 4 Valves & Flow ontrol omponents Valves & Flow ontrol omponents... 106 SJ-200 Low-Profile utterfly Valve... 107 SJ-300N utterfly Valve... 108 SJ-300F utterfly Valve (for Fire Protection)... 110
More informationType B (Extruded Branch) Sizes 4 through 30
STOPPLE Fittings & Reduced Branch Split Tees, Sizes 4-inch and Larger Bulletin No: 1100.001.05 Date: July 2008 Cross Indexing No: n/a Supersedes: 1100.001.04 (07/06) Typical Tapping Setup For Plugging
More informationSection One. Steel Underground. PVC Accessories Bolt-on Dresser Fittings Solvent PVC Pipe Fittings Gasketed PVC Pipe Fittings
Page Steel Underground Section One Powder Coated Steel Fittings Galvanized Steel Fittings PVC Fittings Riser Valves Clampon Saddles, Couplers, Male Ends Repair Couplers PVC Accessories Bolton Dresser Fittings
More informationCOOPLOK Grooved Submittal. Material Specifications
SmithCooper International (SCI) COOPLOK Submittal Directions: Enter in the project information below; then print. Project /Job: Date: Engineer/rchitect: Contractor: ddress: Notes: Project Information System:
More informationPIPE OUTSIDE DIAMETER GUIDE
June 7, 2018-1 PIPE OUTSIDE DIAMETER GUIDE PIPE OUTSIDE DIAMETER GUIDE - SMALL DIAMETER PIPE SIZES NOMINAL PIPE SIZES 1 /2" 3 /4" 1" 1 1 /4" 1 1 /2" 2" 2 1 /2" THIS O.D. GUIDE IS FOR YOUR CONVENIENCE &
More informationSincerely, Your Partners at Specified Fittings
N E S Specified Fittings E S 164 W. Smith Rd. Bellingham, WA 98226-9616 Mailing Address PO Box 28157 Bellingham, WA 98228-0157 PVC FITTINGS W PIP: GASKETED SDR81 - SDR32.5 N Mexico 800-429-1705 Toll Free
More informationHarlingen Water Works System Approved Products List For Subdivisions. January 11, 2005
Harlingen Water Works System Approved Products List For Subdivisions January 11, 2005 Revised March 24, 2016 Harlingen Water Works System Approved Products List for Subdivisions Table of Contents: 1. Valves
More informationSERIES 17 3 & 4 WAY BALL VALVE
SERIES & WAY BALL VALVE CARBON STEEL ASTM A WCB STAINLESS STEEL ASTM A CF8M LIVE LOADED STEM PACKING BLOWOUT PROOF STEM AVAILABLE IN T, L, LL & 80 PORT CONFIGURATION LOCKABLE HANDLE ISO MOUNTING PAD SEAT
More informationA. American National Standards Institute: 1. ANSI Z Relief Valves for Hot Water Supply Systems.
SECTION 220523 - PLUMBING VALVES PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Ball valves. 2. Butterfly valves. 3. Swing check valves. 4. Spring loaded check valves. 5. Water pressure reducing
More informationProduct Specifications PIPE SUPPORT PRODUCTS. For the most up to date information visit our website:
Product Specifications PIPE SUPPORT PRODUCTS For the most up to date information visit our website: www.taylorpipesupports.ca PICTORIAL INDEX FIG. 41 Page 1 FIG. 41 PVC Page 2 FIG. 43 Page 3 FIG. E31 Page
More informationAccutubes. Accuracy True double averaging design +1% of rate accuracy +0.1% repeatability Tested and certified by independent flow labs
s Meriam s Flow Sensors are lab-tested and field-proven flow elements perfect for gas, liquid or steam service. With thousands in use worldwide, the continues to be the right choice when ease of installation,
More informationCerta-Set Main Line Piping System
Certa-Set Piping System Pipe (includes Couplings, Gaskets (O-rings) and Spline) Class 125 (yellow) Class 100 Emerald (green) Size SDR OD L BOD Min. Wall (lbs./ft.) Length / feet 25 feet 30 feet 40 feet
More informationProduct Specifications PIPE SUPPORT PRODUCTS
Product Specifications PIPE SUPPORT PRODUCTS For the most up to date information visit our website: www.taylorassociates.com 1 PICTORIAL INDEX FIG. 41 Page 8 FIG. 41 PVC Page 9 Fig. 42 Page 10 FIG. 43
More informationBall & Socket Fittings (Bauer Style)
Page 96 Ball & Socket Fittings (Bauer Style) Elbow-Bauer Style 3-1/ * *1 MM 76 89 108 133 159 194 2 300 * Locking Bar (part # 9-7318) for & 1 Lever is Sold Separately 6-9038 6-9039 6-9040 6-9041 6-9042
More informationAll Pro Off Road 104 Sheafman Creek, Suite 2 Victor, MT 59875
Important notices: ALL-PRO 3 LINK SAS KIT INSTRUCTIONS These instructions are intended only as a general guide for installing All-Pro products. For some items, specialized mechanical skills, metal fabrication
More informationMLS Meter Leveling Saddle. Parts List
Meter Leveling Saddles Meter Level Saddle is an accepted means to support chart recorders on meter runs or as an economical means to support pipe runs. Rugged Ductile Iron Construction Standard " Meter
More informationWe ve Upped the Ante.
Product Spec Guide Published September 2 The Invention of MagnaForce Surface option codes Alcoa aluminum disc wheel mounting dimensions are consistent with SAE J694 or ISO 4 as applicable. The finish Proprietary
More informationForged High Pressure Pipe Fittings
Forged High Pressure Pipe Fittings Forged High Pressure Pipe Fittings Pressure Class Socket Weld Forged Fittings Products Dimension Specifications Pressure Class Threaded Forged Fittings Products Dimension
More informationEvans Ball Valves. Evans. High Purity 304 Stainless
Ball Valves High Purity 304 Stainless SG Series 1/4-12 and 15A-300A s CFOS Cleaned and Bagged Integrated Valve Assemblies Standard Spool Assemblies & Custom Spool engths (Customer Specified in Feet) 100%
More informationWe Are the Worldwide Provider for All Your Valve and Fitting Needs
Product Catalog We Are the Worldwide Provider for All Your Valve and Fitting Needs C&C Industries strives to earn your business by offering an extensive line of high quality products with a proven track
More informationGrooved End Fittings. System No. Submitted By Spec Sect Para Location Date Approved Date CARBON STEEL PIPE - GROOVED FITTINGS
SEE VICTAULIC PUBLICATION 10.01 FOR DETAILS Victaulic offers a broad line of fittings in sizes through 60"/1500 in a variety of straight and reducing styles. Most standard fittings are cast of durable
More informationInstallation, Operation and Maintenance Guide II NIBCO High Performance Butterfly Valves Series 6822 and 7822
Installation, Operation and Maintenance Guide II NIBCO High Performance Butterfly Valves Series 6822 and 7822 Statements: NIBCO High Performance Butterfly Valves, Series 6822 and 7822, have been designed
More informationMATERIAL SPECIFICATIONS AND BID PROPOSAL SHEET
CATEGORY 1: STEEL COUPLINGS 0 ¾" Steel Couplings (Smith-Blair #411-0501-003) 20 1" Steel Couplings (Smith-Blair #411-013201-003) 20 1¼" Steel Couplings (Smith-Blair #411-016601-003) 20 2" Steel Couplings
More informationPipe/Conduit Clamps & Hangers
Our beam attachments and pipe supports offered in this section are designed to provide supports without drilling or welding. complete selection of beam clamps, pipe clamps, rollers, supports and accessories
More informationTrailer Suspension Series Installation Instructions. Advancing the Practical Application of Suspension Technology
900-9700 Trailer Suspension Series Installation Instructions Advancing the Practical Application of Suspension Technology Springfield, MO n (800) -882 n (17) 82-012 Fax (17) 82-217 n www.hutchensindustries.com
More informationPlatinum Series FEATURES: Up to 16 Stainless Steel Plies
Maximum Vibration Absorption Longest Cycle Life Soft Spring Rate = Ease of Installation Maximum Safety Platinum Series Series 151-1215 Welded Fixed Flange Series 150-TR-2115 Van Stone Floating Flange Keflex
More informationPIPE & CONDUIT SYSTEMS. Free Call:
PIPE & CONDUIT SYSTEMS Free Call: 1800 899 480 www.anchoragegroup.com.au Anchorage pipe supports are designed and manufactured in Australia by leading manufacturing company, Swift Metal Services. Offering
More informationPermaShield Pipe. Fab-Tech, Inc. PRODUCT CATALOG. Stainless Steel Corrosive Fume Exhaust Systems With PermaShield Fluoropolymer Barrier Coating
PermaShield Pipe C Stainless Steel Corrosive Fume Exhaust Systems With PermaShield Fluoropolymer Barrier Coating PRO CATALOG Catalog 10/12.8 Fab-Tech, Inc. A Critical Process Systems Group Company CONTENTS
More informationSTOPPLE Plus Fittings
STOPPLE Plus Fittings Sizes: 4- Through 36-inch Bulletin No: 1100.007.02 Version: 08.2014 Cross Indexing No: n/a Supercedes: 1100.007.01 (06.2014) Offset in closeup Options Description STOPPLE Plus fittings
More informationBSM ROTARY GEAR PUMPS
FT. MTD. PUMP BSM bronze pumps are ideal for use where corrosion resistant materials are required such as providing circulation on water-jacketed engines, pumping saline solutions as well as a variety
More informationPRODUCT SPEC GUIDE. Published May 2016
PRODUCT SPEC GUIDE Published May 26 The Invention of THE LIGHTWEIGHT INNOVATION LEADER. MAGNAFORCE Proprietary MagnaForce alloy offers a % increase in strength over existing alloys Alcoa Ultra ONE Wheels
More informationGrooved End Fittings. System No. Submitted By Spec Sect Para Location Date Approved Date CARBON STEEL PIPE - GROOVED FITTINGS
SEE VICTAULIC PUBLICATION 10.01 FOR DETAILS Victaulic offers a broad line of fittings in sizes through 60"/1500 in a variety of straight and reducing styles. Most standard fittings are cast of durable
More informationTriad Series. 3 Piece Ball Valves Full Port: 1 /4-4 Standard Port: 3 /4-2 1 /2. Model FP - Full Port Model SP - Standard
A Bray High Performance Company A Subsidiary of BRAY INTERNATIONAL, Inc. 3 Piece Ball Valves Full Port: 1 / - Standard Port: 3 / - 1 / Triad Series Model FP - Full Port Model SP - Standard Port Flow-Tek
More informationWe Are the Worldwide Provider for All Your Valve and Fitting Needs
Product Catalog We Are the Worldwide Provider for All Your Valve and Fitting Needs C&C strives to earn your business by offering an extensive line of high quality products with a proven track record for
More informationCHAIN & HOOKS. Proof Coil Chain Grade 28. Transport Chain Grade 70
Proof Coil Chain Grade 28 Proof coil chain is suitable for use as towing chain, logging,fencing, trailer safety chain, boat anchors, security barriers or other general purposes where chain of high tensile
More informationA. This Section includes general duty valves common to several HVAC piping systems.
SECTION 23 05 23 - PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply
More informationTRI TOOL INC. TECHNICAL SPECIFICATION 301SP SHORT PERCH TUBE FACING AND SQUARING TOOL JANUARY, 2001
TRI TOOL INC. TECHNICAL SPECIFICATION 301SP SHORT PERCH TUBE FACING AND SQUARING TOOL JANUARY, 2001 MODEL 301SP TUBE FACING AND SQUARING TOOL The Model 301SP Tube Squaring Tool is designed specifically
More informationGrooved End Fittings. System No. Submitted By Spec Sect Para Location Date Approved Date CARBON STEEL PIPE - GROOVED FITTINGS
SEE VICTAULIC PUBLICATION 10.01 FOR DETAILS Victaulic offers a broad line of fittings in sizes through 60"/1500 in a variety of straight and reducing styles. Most standard fittings are cast of durable
More informationRoller Chase Frame Price List
Roller Chase Frame Price List Eino Products / Diamond Chase 418 South Motor Avenue, ph (626) 969-1821 fax (626) 969-1599 The All NEW Roller Chase Construction Products team has re-designed the Roller Chase
More informationMEH Series Sectionalizing Enclosures. Single-Phase and Three-Phase
MEH Series Sectionalizing Enclosures Single-Phase and Three-Phase ABB MEH Sectionalizing Enclosures ABB s MEH Sectionalizing Enclosures provide an economical and safe sectionalizing tap point for underground
More informationSteel Fabricated Coupling
Steel Fabricated Coupling Straight Connection IMPORTANT LINKS Click appropriate words to go to: Standard Limited Warranty Sales Terms & Conditions Freight Policy Returns Policy Corrosion & Product Selection
More informationSOLAR HEATING SYSTEM
SECTION 13600 SOLAR HEATING SYSTEM PART 1 GENERAL 1.01 SUMMARY A. Related Sections: 1. 07600 - Flashing and Sheet Metal. 2. 07900 - Joint Sealers. 3. 15260 - Thermal Insulation (Plumbing). 4. 15410 - Piping
More informationTABLE OF CONTENTS. Pipe Diameter Chart (Reference Only)..50 Extensions 38,40,42,44
TABLE OF CONTENTS Item Page Item Page ANSI/AWWA Compact & Full Body Pipe Fittings: Product Submittals and Installation: Mechanical & Flange Joint C153. 3-9 20U Protective Fusion Bonded Epoxy....5,5 Mechanical
More informationValve Products INLINE. Ball Valves. Direct Mount. Multi-port. Sanitary. Valve Automation. Motion & Flow Control Products, Inc
Valve Products Ball Valves Direct Mount Multi-port Sanitary Valve Automation INLINE BALLVALVE.COM Inline has been supplying innovative valve solutions to the process industry for nearly twenty years. Our
More informationRoller Chase Frame Price List
Roller Chase Frame Price List Eino Products / Diamond Chase 418 South Motor Avenue, ph (626) 969-1821 fax (626) 969-1599 The All NEW Roller Chase Construction Products team has re-designed the Roller Chase
More information***************************************************************************************************************
15515 VALVES, HANGERS, AND SPECIALTIES *************************************************************************************************************** SPECIFIER: CSI MasterFormat 2004 number:23 21 16 ***************************************************************************************************************
More informationSECTION 17 FIRE HYDRANT ASSEMBLIES General
SECTION 17 FIRE HYDRANT ASSEMBLIES 17-1.01 Scope 17-1 General This section describes the requirements for furnishing and installing as appurtenances to treated water mains. These requirements include the
More informationFABRICATION COMPONENTS STAINLESS STEEL MANDREL BENDS T304 STAINLESS STEEL OVAL MANDREL BENDS T304 S.S. OVAL TO ROUND TRANSITIONS
STAINLESS STEEL MANDREL BENDS T304 STAINLESS STEEL OVAL MANDREL BENDS Nominal Size Bend Angle 13189 3 45 deg. (horizontal) 16 gauge 4 1/2 13191 3 90 deg. (horizontal) 16 gauge 4 1/2 13200 3 45 deg. (vertical)
More informationTOTAL PIPING SOLUTIONS, INC. TRIPLE-TAP
TOTAL PIPING SOLUTIONS, INC. TRIPLE-TAP Extended Range Stainless Steel Push Plug Line Stop Tapping Sleeve Technical Specifications Controlled Document: ENGTS-05/120417 December 2017 TRIPLE TAP Extended
More informationInsertaValve Sleeve. InsertaValve Valve Assembly. Valve Insertion, simplified. Material Specifications. Transmate InsertaValve
Material Specifications Material Specifications Sleeve 10" - 12" installations in cast iron, ductile iron, A/C, PVC C-900 and steel pipe No Loss of Pressure Minimal Water Loss Completion time is less than
More informationValve Products INLINE. Ball Valves. Direct Mount. Multi-port. Sanitary. Valve Automation BALLVALVE.COM
Valve Products Ball Valves Direct Mount Multi-port Sanitary Valve Automation INLINE BALLVALVE.COM Inline has been supplying innovative valve solutions to the process industry for nearly twenty years. Our
More informationQuality Bungies that actually stretch and last!!
TARP TIE DOWNS - 'Bungie Cords' (Highest Quality EPDM Rubber Made in U.S.A. Includes "S" hooks) Quality Bungies that actually stretch and last!! Part # 496-90 496-150 496-200 496-300 Size (in) 9 15 20
More information411 Steel Couplings Material Specifications
411 Steel Couplings Material Specifications Gasket Material Specifications STANDARD: Nitrile (Buna-N)-NSF 61 Compounded to produce superior storage and performance characteristics while resisting water,
More informationFITTINGS AND FABRICATIONS DESIGNED AND ENGINEERED HIGH DENSITY POLYETHYLENE PIPE
Effective May 24, 2002 Cancels all previous publications U.S. Price $12.95 FITTINGS AND FABRICATIONS DESIGNED AND ENGINEERED FOR HIGH DENSITY POLYETHYLENE PIPE JCM Industries, Inc. P.O. Box 1220 Nash,
More informationDOUBLE OFFSET HIGH PERFORMANCE BUTTERFLY VALVES
DOUBLE OFFSET HIGH PERFORMANCE BUTTERFLY VALVES Table of Contents DESCRIPTION PAGE Standard Compliance... 2 Advantages... 3 Resilient Seat Exploded View... 4 Fire Safe Seat Exploded View... 5 CLASS 15
More informationPHD Manufacturing, Inc.
4408 Columbiana-Waterford Road Columbiana, Ohio 44408 Phone: (800) 2-276 (0) 482-9256 Fax: (0) 482-276 www.phd-mfg.com Effective April 99 2 Quick Reference This catalog updated on May, 205 For the most
More informationCITY OF SAN DIEGO PUBLIC UTILITIES DEPARTMENT APPROVED MATERIALS LIST TABLE OF CONTENTS
CITY OF SAN DIEGO PUBLIC UTILITIES DEPARTMENT TABLE OF CONTENTS SYSTEM Page A. Bronze Water Service Fittings.... 3 Corporation Stop, Curb Stop, Property Valve, Coupling, Compression Fittings, Adaptors,
More informationHDPE HIGH DENSITY POLYETHYLENE PRODUCTS
HDPE HIGH DENSITY POLYETHYLENE PRODUCTS The Standard of Excellence in the Industry CPS-IPS PECST-SL PECR1 PECR2 PECS- PECS-22 PECSC-1 PECSC-2 CERTIFIED TO NSF/ANSI 1 13 BADGER STREET YORKVILLE, ILLINOIS
More informationROMAC INDUSTRIES, INC. WIDE RANGE RESTRAINT. RESTRAINED END CAP page 6-7 NOW AVAILABLE FOR HDPE PIPE NO STIFFENER REQUIRED
ROMAC INDUSTRIES, INC. WIDE RANGE RESTRAINT RESTRAINED COUPLING page 4-5 RESTRAINED END CAP page 6-7 RESTRAINED FLANGED COUPLING coming soon JUNE 2014 UPDATE NOW AVAILABLE FOR HDPE PIPE NO STIFFENER REQUIRED
More informationGRAIN CART TARP SYSTEM INSTALLATION AND OPERATION MANUAL
GRAIN CART TARP SYSTEM INSTALLATION AND OPERATION MANUAL Grain Carts KITS Thunderstone Manufacturing, LLC. 3400 West O Street Lincoln, NE 68528 402-435-4249 (Fax) 402-438-3918 www.thunderstonemfg.com Aluminum
More informationGAS DISTRIBUTION PRODUCTS METER RISERS
GAS DISTRIBUTION PRODUCTS METER RISERS INDUSTRIES ABOUT US THE ULTIMATE CONNECTION Our Company Continental Industries, headquartered in Tulsa, Oklahoma, was formed in 1958 and is today a leading manufacturer
More informationFord Brass Saddles Style 101B and 202B
101B Ford Brass Saddles 101B and 202B 101B, 3/4" and 1" Taps 202B, 3/4" through 2" Taps Specifications Body - 85-5-5-5 brass alloy as per ASTM B62, ASTM B584 and AW WA C800. Threads may be FIP, AW WA,
More informationFisher 8580 Rotary Valve
8580 Valve Product Bulletin Fisher 8580 Rotary Valve The Fisher 8580 rotary valve offers excellent throttling and automated on-off, quarter-turn performance. An approximately linear flow characteristic
More informationTL960 PARTS MANUAL. Fuel Section. Page 9-1. Fuel 09/97
Fuel Section Fuel Page 9-1 Fuel Tank Between The Rails Page 9-2 Fuel Fuel Tank Between The Rail Item Part Num. Number Qty. Description Notes 1 61360662 1 Elbow, 90 o, 1/2" NPT x 5/8" T 2 61270100 1 Sender
More information