Table of Contents DESCRIPTION

Transcription

1

2 Important Notice The products described within this literature, including without limitation, product features, specifications, designs, availability and pricing are subject to change by Haldex and its subsidiaries at any time without notice. This document and other information from Haldex, its subsidiaries and authorized distributors provide product and/or system options for further investigation by users having technical expertise. It is important that you analyze all aspects of your application and review the information concerning the product or system, in the current literature or catalog. Due to the variety of operating conditions and applications for these products or systems, the user, through their own analysis and testing, is solely responsible for making the final selection of the products and systems and assuring that all performance, safety and warning requirements are met.

3 Table of Contents PAGE New & Remanufactured Compressors, Kits, Governors & Air Cleaner Air Valves Suspension Valves Actuators, Maxibrakes, Service Chambers, Replacement Parts Electrical Products, Switches, Primary Wire, Brake Controllers, Battery Hardware Air Treatment Products Gladhands, Gladhand Grips, Reservoirs, Air Hoses, Coiled Air Hoses, Flexastiks Brake Adjusters (Manual, AA, SABA) Water Pumps (New & Remanufactured) Anti-Lock Brake Systems (ABS) New & Remanufactured Clutches Remanufactured Products Alternators, Starters, Fan Clutches, Brake Calipers, Steering Gears & Pumps, Air Wiper Motors, Air Control Valves, Vacuum Boosters RSD Complete Fleet Solutions Grey-Rock TM Brake Block/Lined Shoe Descriptions Grey-Rock TM Brake Shoes (Most Popular Styles) Brake Hardware Kits TransitmaX High Performance Brake Lining Copyright 205 Haldex Brake Products Corporation 0930 North Pomona Avenue Kansas City, Missouri 6453 All rights reserved. Materials may only be reproduced with written permission of Haldex. Any Part Number throughout this Catalog with a Suffix X is Considered a Remanufactured Part.

4 Remanufactured Haldex Compressors Flange and Engine ENGINE - Standard Belt Drive with Spec. Ford Bottom Plate EL3022RX, EL3022X Standard Belt Drive EL3060X EL CFM EL CFM Standard Belt Drive EL6060X Air Cooled Single Cylinder KN85020X Water Cooled Singe Cylinder KN86020X EL CFM Haldex air compressors are designed for use in heavy duty vehicle air brake systems. The EL300/EL600 are water cooled, two-cylinder, EL CFM reciprocating piston type compressors designed for high performance with maximum durability for extended life. The EL600 is identical to the EL300 except for the increased stroke which is achieved by increasing the crankshaft throw. The height of the compressor is increased by.9 inches. The EL3200 is two twin cylinder EL600 compressors assembled in-line and is designed for use on vehicles with a high air volume requirement for special accessory equipment requirements in addition to the air brake system. The EL850 is a single cylinder compressor offered in watercooled or air-cooled versions. The EL740 compressors are offered in water-cooled or aircooled versions and accommodate belt-driven or gear-driven mounting requirements for most gasoline and diesel engines. All compressors are available remanufactured. Some older EL compressors may not be available in new product and may only be available in remanufactured form. REMANUFACTURED PART NUMBERS Any part number throughout this catalog with the X Suffix is considered a Remanufactured Part. COREFREE TM PART NUMBERS Any part number throughout this catalog with the RX Suffix is CoreFree TM. These parts require no core. The part you are looking for may be available CoreFree TM. Please contact your Customer Service Representative for current availability. COMPRESSOR PORTING REFERENCES Porting references on Bendix Compressors are looking at the non-drive end of the compressor. Porting references on Haldex Compressors are looking at the drive end of the compressor. Heads on Haldex Compressors may be rotated unless otherwise noted. 2 EL CFM Identification Information Caterpillar 673, 674, 3406B - Caterpillar 3406-E240 Spline Caterpillar 3406-E324 Taper Caterpillar 3406B-E324 Taper Mack In-Line Six (*Do Not Turbo-Charge Mack Compressors) Caterpillar 3306 Cummins In-Line (Double Flange) Cummins Type B Engines Cummins Type C Engines Detroit Diesel 0 Detroit Diesel 4 Detroit Diesel 45 Detroit Diesel 50 Detroit Diesel 75 Detroit Diesel 60 Series EL3080X EL308X EL6080X EL320X EL620X EL370X EL3200X EL6200X EL3X* EL4X EL6X EL35RX, EL35X EL3040RX, EL3040X EL6040RX, EL6040X KNT85230X KNT86230X EL3220X EL3050RX, EL3050X EL6050RX, EL6050X EL3090X EL360X EL660X EL300RX, EL300X EL600RX, EL600X EL6250X EL332RX, EL332X EL632X

5 Remanufactured Competitor Compressors BENDIX 03274X 0939X RX X X X Model Description Cooling Air Inlet Air Outlet Notes 03274X TF50 CAT 3406B - Flange Mount Water/Air Left Top Threaded Discharge 0939X TF550 CAT 3406,C0,C2,C5,C6-Flange Mt. Water Left Left/Top Crankshaft Thread X TF50 Base Mount Water/Air Left Top Threaded Discharge X TF750 Detroit 0 Tilt - Flange Mount Water/Air Right Top/Right 60 Series Adapterless X TF550 Detroit 0 Tilt - Flange Mount Water/Air Right Top/Right 60 Series Adapterless CATERPILLAR (only available thru CAT and Haldex) X X Unloader Model Description Air Inlet Air Outlet Port/Type Notes X SS296 Super Single Cyl. Cummins Std. Case Left Rear Left/Direct For L/K/N Engines X SS296 Super Single Cyl. Cummins Std. Case Left Rear Left/Direct Square Flange Crank X QE296C Econo Single Cyl. Cummins C-Series Left Front n/a Iron Head/Cover X QE296 Econo Single Cyl. Cummins L0/N4 Left Rear n/a Iron Head/Cover X QE338 Econo Single Cyl. Cummins E - Std. Case Left Rear n/a Iron Head/Cover X X X X X X X X EL365007X EL3653X EL36532X EL3655X EL36552X Description Notes EL365007X CAT EL365-2-Hole Mount Head Rotation: Rear / Block Rotation: Right EL3653X CAT EL365-3-Hole Mount C3 (Pre 2007) Naturally Aspirated: High Air Output EL36532X CAT EL365-3-Hole Mount C3 (2007 After) Thru-Drive: Tooth 50 ft lb torque EL3655X CAT EL365-3-Hole Mount C5 (Pre 2007) Pressure Relief Valve: All Units EL36552X CAT EL365-3-Hole Mount C5 (2007 After) Inlet Check Valve: All Units 2007 After CUMMINS WABCO Bore Water* Discharge* Governor* Model Description Size Port Port Port X SS38 Cummins ISX 85MM M8 -.5 STOR M STOR M0 -.0 STOR X SS38 Cummins L, M, N 85MM 3/4-6 STOR M STOR M0 -.0 STOR X SS38 Cummins ISC, Thru Drive 85MM 3/4-6 STOR M STOR M0 -.0 STOR X SS38 Ext. Flange w/gear, Thru Drive 85MM 3/8 NPT /2 NPT /8-27 NPT X SS38 Ext. Flange w/gear, Non-Thru Drive 85MM 3/8 NPT /2 NPT /8-27 NPT * STOR - Straight Thread O-Ring 3

6 MANIFOLD KIT (INTAKE) Hose - 3/4 Mounting centers PART NUMBER SN37AD Compressor Kits / Air Governor MANIFOLD KIT (DISCHARGE) For all EL300/EL600 Compressors PART NUMBERS SN37AH - Side Outlet SN37J - Threaded SN37K - Right Hand SN37L - Left Hand SN37AH DISCHARGE HOSE ASSEMBLY (FLEXIBLE) /2 I.D. Ferrule and nut included For easy changeover from a Bendix side mount discharge to a top discharge Haldex Compressor PART NUMBERS KN KN KN KN COMPRESSOR INSTALLATION KIT For EL300/EL600 Compressors PART NUMBER SN44 INLET CHECK VALVE For EL300/EL600 Compressors PART NUMBER SN37AJ SN37J SN37K SN37L PISTON TYPE GOVERNOR Direct compressor or remote mount /8-27 NPT ports.336 Diameter mounting holes Cut-in pressure of 05 PSI normal Cut-out pressure of 30 PSI normal PART NUMBER KN8530 (new) REMANUFACTURED D-2 STYLE GOVERNOR Standard unit /8 ports Cut-in pressure of 05-0 PSI normal Cut-out pressure of 5-30 PSI above Cut-in PART NUMBER 27549RX (CoreFreeTM) Air Cleaners Large capacity Provides greater atmospheric air intake capacity Suitable for mounting on Haldex and competitive model compressors 00696E KN9040 Filter Only Assembly with Filter 4

7 Most Haldex Valves are available in New, Remanufactured and CoreFree. Please consult the Haldex Master Catalog ( for our complete listing. Relay Valves Used to apply and release service brakes on tractor or trailer Cover may be rotated without affecting performance or warranty Valves are supplied with and without brackets (Brackets may be purchased separately) RG2 - TWO PORT TRAILER VALVE Compact size Control position is in relationship to delivery ports Mounting.34 on /2 centers Crack Pressure 5.6 +/-.0 PSI CONTROL SUPPLY DELIVERY POSITION KN28500 (2) 3/8 (2) 3/8 90 KN2850 3/8 & /2 (2) 3/8 90 KN2854X* /2 & 3/8 (2) 3/8 90 KN28520 (2) /2 (2) /2 90 KN2853 /2 & 3/8 (2) 3/8 0 * Available Remanufactured or CoreFree TM only. RG5 - TWO PORT TRAILER VALVE Used on 2 tank, 3 valve trailer systems and tractor applications Made of durable EGC (Engineering Grade Composite) Crack Pressure 6.0 PSI KN28550 shown SUPPLY SUPPLY A B DEL. CONTROL KN28550 /2 x 3/8 Plugged (2) 3/8 /4 Nipple KN2855 Plugged 3/8 (2) 3/8 /4 TWO PORT FAST AIR AND BALANCING (FAB) Speedup or fast air relay Used on converter dollies, long wheel base and towing trailers to accelerate control signal and meet FMVSS2 pressure differential requirements Cover may be rotated without affecting performance or warranty CRACK SUPPLY DEL. CONTROL PRESSURE KN28300 (2) /2 (2) /2 3/8 0 PSI TWO AND FOUR PORT SINGLE CONTROL LINE Used to apply and release service brakes on tractor or trailer Crack Pressure 4.6 PSI SUPPLY DELIVERY CONTROL PORTS KN28042 (2) /2 (4) /2 /4 4 KN283 (2) /2 (2) /2 /4 2 KN2840 (2) /2 (2) /2 /4 2 TWO AND FOUR PORT WITH ANTI-COMPOUNDING Built-in anti-compounding two-way check valve for spring brake control Crack Pressure 4.6 PSI KN283 shown KN2804 shown SUPPLY DELIVERY CONTROL PORTS KN2804 (2) /2 (4) /2 2 (/4 ) 4 KN28043 (2) /2 (2) /2 3/8 & /4 2 KN2807 (2) /2 (2) /2 /4 & /8 2 TWO PORT WITH INTEGRAL BRACKET Used to apply and release service brakes on tractor or trailer KN28060 shown CRACK SUPPLY DEL. CONTROL PRESSURE KN28060 (2) /2 (2) 3/8 3/8 4.6 PSI KN2806 (2) /2 (2) /2 3/8 4.6 PSI KN2832 (2) /2 (2) /2 3/8 7.0 PSI FOUR PORT WITH INTEGRAL BRACKET Used to apply and release service brakes on tractor or trailer CRACK SUPPLY DEL. CONTROL PRESSURE KN28080 (2) /2 (4) 3/8 3/8 7.0 PSI KN28085 (2) /2 (4) 3/8 3/8 4.6 PSI 5

8 Relay Valves (cont d) RELAY VALVE - FOUR (VERTICAL) PORTS - SINGLE CONTROL For tractor or trailer application Four delivery ports facing down Low differential - high capacity. Available in Remanufactured 3.0 PSI crack pressure Used in conjunction with a turbo-charged air compressor Added fuel economy and greater engine efficiency KN23500 Isolation Valve SUPPLY SUPPLY A B DEL. CONTROL A /4 Plugged(4) 3/8 /4 A86472* 3/4 Not Drilled-No Threads (4) /2 /4 A86473 /2 Not Drilled-No Threads (4) /2 /4 A /4 Plugged(4) /2 /4 * Available New only. Trailer Valves FF2 - FULL FUNCTION VALVE Single valve trailer system combines a pressure protection valve, two one-way check valves, spring brake valve with quick release and a four port relay valve Easy to install, maintain and troubleshoot Meets FMVSS-2 anti-compounding requirements Available in Remanufactured and CoreFree TM PART# KN Crack Pressure; Res. 3/4; Cont. /4 ; Sup. 3/8 ; Spring Brake 3/8 Del. (4) 3/8 KN Crack Pressure; Res. /2; Cont. /4 ; Sup. 3/8 ; Spring Brake 3/8 Del. (4) 3/8 KN28602* 5.0 Crack Pressure; Res. 3/4; Cont. /4 ; Sup. 3/8 ; Spring Brake 3/8 Del. (4) 3/8 KN28603* 5.0 Crack Pressure; Res. /2; Cont. /4 ; Sup. 3/8 ; Spring Brake 3/8 Del. (4) 3/8 * Not available in CoreFree TM. TRAILER BRAKE CONTROL VALVE Made of Engineering Grade Composite (EGC) Light weight; withstands high impact Integral anti-compounding Black Cover - Service Brake White Cover - Spring Brake PART# RES. SUPPLY CNTRL. DEL. PRIORITY KN260 /2 3/8 3/8 (4) 3/8 Service Brake KN2620 /2 3/8 3/8 (4) 3/8 Spring Brake KN262 /2 3/8 3/8 (4) 3/8 Service Brake 6 EMERGENCY RELAY VALVES Pre-2 trailers, converter dollies or exempt trailers Crack Pressure: New PSI Reman/CoreFree TM PSI KN auto. bleed down feature KN non-charging KN30300 and KN charging SVC. EMER. DEL. AUX. INLET INLET (4) RES. RES. KN3000 /4 /4 /4 Plugged 3/4 KN /8 3/8 3/8 /2 Plugged KN30300 /4 /4 /4 Plugged 3/4 w/nipple KN30400 /4 /4 3/8 Plugged 3/4 Fem. w/nipple RT-4 MULTI-FUNCTION TRAILER VALVES Used on trailers to control both parking and emergency brake functions KN26000X - Closing PPV 55 PSI KN2600/KN Closing PPV 70 PSI Meets FMVSS-2 trailer requirements KN26000X* Trailer Supply: (2) 3/8 ; Trailer Control: 3/8 Reservoir /2 & 3/8 ; Delivery: (4) 3/8 KN2600 Trailer Supply: 3/8 & Plugged; Trailer Control: 3/8 ; Reservoir /2 & 3/8 ; Delivery: (4) 3/8 KN26020 Trailer Supply: (2) 3/8 ; Trailer Control: 3/8 Reservoir /2 & 3/8 ; Delivery: (4) 3/8 * Available Remanufactured or CoreFree TM only.

9 Most Haldex Valves are available in New, Remanufactured and CoreFree. Please consult the Haldex Master Catalog ( for our complete listing. Hand Operated Valves MANIFOLD DASH VALVE Replacement for the MV2/MV3 Valve One piece construction provides no center body leakage Made of durable Engineering Grade Composite (EGC) PORTS KN /8 PTC Vertical Mount; M6 Metric Nuts on Cover KN206 /4 Horizontal Mount; /4-20 Well Nuts in Body KN2065 /4 Horizontal Mount; /4 Hole in Body KN2066 /4 Vertical Mount; /4-20 Well Nuts in Body KN2069 3/8 PTC Vertical Mount; /4 Hole in Body PUSH-PULL HOSTLER VALVE Panel or bulkhead mount Requires 3/4 hole in dashboard PP-8 REPLACEMENT VALVE Replacement for the PP-8 Valve Controls tractor only parking Made of durable Engineering Grade Composite (EGC) Bulkhead mount - 7/8 KN20035 All Ports /8-27 NPT PP-7 REPLACEMENT VALVE Replacement for the PP-7 Valve Controls Tractor Protection Valve Made of durable Engineering Grade Composite (EGC) Bulkhead mount - 7/8 KN2000 KN200 KN2005 /4 Ports; 25/40 PSI Pop Press.; Plain Knob /4 Ports; 0 PSI Pop Press.; Plain Knob /4 Ports; 25/40 PSI Pop Press.; Trailer Emergency Knob SUP. CNTRL. DEL. EXH. KN20025 /8 NPT /8 NPT /4 NPT /4 NPT PUSH-PULL PARKING BRAKE VALVE Replacement for the PP- Valve Bulkhead mount - 7/8 Made of durable Engineering Grade Composite (EGC) Pop Pressure-35+/-0 PSI Knob Included PUSH-PULL PANEL MOUNT VALVE Panel mount All Ports are /4 Made of durable Engineering Grade Composite (EGC) KN2002 KN20022 /8 NPT Ports; System Brake /8 NPT Ports; Parking Brake KN2003 KN20033 POP PRESSURE PSI 7-7 PSI FLIPPER STYLE PANEL MOUNT Panel or remote mount Made of durable Engineering Grade Composite (EGC) An on-off, non-automatic two position valve Chrome Handle; All Ports /8 KN2000 KN20002 MOUNTING HOLES #0-24 with.50 Centers M5 Metric with.50 Centers 7

10 Most Haldex Valves are available in New, Remanufactured and CoreFree. Please consult the Haldex Master Catalog ( for our complete listing. AUTOMATIC DRAIN VALVE Drain Valves MANUAL DRAIN VALVE Expels moisture with each brake application Removes excess moisture and contamination from wet tank Performs independently from compressor cycling Direct replacement for Bendix DV2 Built in heater prevents valve freeze-ups Built in filter protects valve against contamination Manual wet or dry tank drain valves Cable is looped on both ends for easy hand hold All models have /4-8 NPT threads Vibra-SealTM applied to threads KN24000 KN2400 Not Heated Heated - 2 V Heated - 2 V Heated - 24 V KN2400 HIGH LOW PROFILE PROFILE 200 KN200 No Cable 203 KN203 3 Cable 204 KN204 4 Cable 205 KN205 5 Cable Quick Release Valves QUICK RELEASE VALVE Made of durable Engineering Grade Composite (EGC) Lightweight INLET OUTLET PSI DIF. KN32003 /2 3/8 3 KN /8 3/8 0 KN320 /2 3/8 0 KN3203* /2 3/8 0 KN /8 3/8 6 * Extra life QR Valve with dirt exclusion seal. Pressure Relief Valve QUICK RELEASE VALVE W/TWO-WAY CHECK Used in spring brake control circuits to prevent compounding on trucks and tractors Replaces two valves with one CNTRL. DEL. KN32040 /4 /4 KN3204 /4 3/8 Soleonid Valve Non-adjustable Made of brass and stainless steel Factory set at 50 PSI (A)-Air Lines (B)-Reservoirs KN /4 KN /4 KN3450-3/8 KN3250-3/8 KN /2 A B Used to operate the shift mechanism of a two speed axle KN68230 KN V 24 V 8

11 Most Haldex Valves are available in New, Remanufactured and CoreFree. Please consult the Haldex Master Catalog ( for our complete listing. Tractor Protection Valves TRACTOR PROTECTION VALVE THREE LINE - AUTOMATIC Equipped with built-in quick release to improve trailer timing Eliminates the need for a separate valve Interchangeable with most competitive units TRACTOR PROTECTION VALVE- TWO LINE NON-AUTOMATIC Must be used with Pressure Sensing Dash Control Valve Built-In Quick Release KN34050X KN34070X 3-Line w/snorkel Exhaust 3-Line w/o Quick Release Port orientations detailed in Haldex Master Catalog ( TRACTOR PROTECTION VALVE MANIFOLD TYPE - NON-AUTOMATIC TRAC. TRAC. TRLR. TRLR SERV. EMER. SERV. EMER. KN /8 /4 /2 /2 KN3406* 3/8 /4 /2 /2 *Exhaust Fitting Includes tractor protection, two double check valves, stoplight switch port and built-in quick release KN340 2-Line; No Exhaust KN34 2-Line; w/exhaust Tube Port orientations detailed in the Haldex Master Catalog ( Inversion Valve Used with spring brake equipped trucks Complies with FMVSS-2 regulations Detects primary control line failure, allowing modulated control of spring brake Interchangeable with competitive units without anti-compounding feature PRIM. RES. SUPPLY CONTROL DELIVERY VERSION KN28030 /4 /4 /4 /4 Pre-March 998 KN28032 /4 /4 /4 /4 Post-March 998 KN /8 PTC 3/8 PTC 3/8 PTC 3/8 PTC Pre-March 998 KN28032 Shown 9

12 Most Haldex Valves are available in New, Remanufactured and CoreFree. Please consult the Haldex Master Catalog ( for our complete listing. Pressure Protection Valves PRESSURE PROTECTION VALVE E-coated zinc diecast body provides exceptional corrosion resistance Premium Nitrile diaphragm provides long life and reliability Durable design increases product life, reducing replacement costs Use in air suspensions, air seats and cab isolation systems PORT CLOSING OPENING SIZES PRESSURE PRESSURE FILTER /4 NPT 70 PSIG 75 PSIG Min. Yes /4 NPT 65 PSI 70 PSI No /4 NPT 80 PSI 85 PSI No /4 NPT 90 PSI 95 PSI No PRESSURE PROTECTION VALVE WITH ONE-WAY CHECK One-way check valve prevents reverse air flow Exceptional corrosion resistance PORT CLOSING OPENING SIZES PRESSURE PRESSURE /4 NPT 65 PSI 70 PSIG /4 NPT 80 PSI 85 PSI /4 NPT 90 PSI 95 PSI Foot Operated Valves SINGLE CIRCUIT FOOT VALVE Used primarily with Pre FMVSS-2 vehicles Provides smooth and consistent pedal feel Interchangeable with most competitive units DEL. SUPPLY KN2200 (4) /2 (2) /2 (2) /4 DUAL CIRCUIT FOOT VALVE Meets FMVSS-2 requirements Provides smooth and consistent pedal feel Interchangeable with most competitive units PEDAL ANGLE DEL. SUPPLY KN2250 valve only (4) 3/8 (4) 3/8 KN (4) 3/8 (4) 3/8 KN (4) 3/8 (4) 3/8 KN (4) 3/8 (4) 3/8 Check Valves ONE-WAY CHECK VALVE Positive, long lasting valve for every application on trucks, tractors and trailers 0 PORTS KN23000 /2 KN2300 3/8 KN /4 KN23060 /2 90 (Brass) TWO-WAY CHECK VALVE Shuttle type valve, mounts horizontally. Interchangeable with most competitive models INLET INLET OUTLET OUTLET KN /8 M 3/8 F 3/8 F /4 F w/nipple Reducer KN /8 F 3/8 F 3/8 F /4 F Reducer F = Female M = Male

13 Remanufactured Competitive Valves BENDIX R-2 RELAY VALVE CRACK SUPPLY DELIVERY CONTROL EXHAUST PRESSURE 02626X /2 (4) /2 /4-4.0 PSI BENDIX PP- HAND CONTROL VALVE CRACK SUPPLY DELIVERY CONTROL EXHAUST PRESSURE X /8 /8 - /8 - Note: Automatic Release Pressure - 40 PSI. BENDIX E-6 DUAL CIRCUIT FOOT VALVE CRACK SUPPLY DELIVERY CONTROL EXHAUST PRESSURE 2867X (4) 3/8 (4) 3/ BENDIX RE-6 EMERGENCY RELAY VALVE INTL. EMER. MAX. EMER. SUPPLY DELIVERY SVC. EMER. APPL. PRES. REL. PRES X () 3/8 (2) /4 /4 /4 50±5 PSI 95 PSI () 3/4 (2) 3/8 BENDIX QR- QUICK RELEASE VALVE CRACK SUPPLY DELIVERY EXHAUST PRESSURE X 3/8 3/8 - PSI SEALCO RATIO RELAY TRAILER VALVES RESERVOIR RESERVOIR SUPPLY DELIVERY A B CONTROL 070X 3/8 (4) 3/8 /2 /2 3/8 0500X 3/8 (4) 3/8 /2 3/8 3/8 0500X 070X BENDIX MV-3 (MANIFOLD) HAND CONTROL VALVE DELIVERY DELIVERY RESERVOIRS TRACTOR TRAILER EXHAUST 80056RX (2) /4 /4 /4 /4

14 Controlled Response (CR) Height Control Valve Controlled response time delay technology maintains chassis position and conserves air to increase compressor life Robust diecast zinc body to ensure operation in extreme conditions Flexible right or left mounting options provide ease of installation and reduced inventories Optional integrated dump valve provides the ability to automatically or manually exhaust air from the suspension All Ports are /8 NPT DUMP VALVE FITTINGS N/A / N/A No Fittings N/A Adapt /8 NPT to M0 x N/A 3/ Norm. Open /4 and 3/ Norm. Closed /4 and 3/8 Precision Response (PR) and PR Plus HCV Use of ceramic seal technology allows the valve to be very reliable and highly durable even in the most extreme conditions Non-time delay valve Tight dead zone Provides precise adjustment to ride height variation Normally Open Dump Valve ARM PORTS Fixed 3-Port Side Manifold; Pilot Port /4 PTC; All Other Ports 3/8 PTC Fixed 5-Port Side Manifold; Pilot Port /4 PTC; All Other Ports 3/8 PTC Adjust. 3-Port Side Manifold; Pilot Port /4 PTC; All Other Ports 3/8 PTC Adjust. 2-Port Straight Manifold; Pilot Port /4 PTC; All Other Ports 3/8 PTC Adjust. 3-Port Straight Manifold; Pilot Port /4 PTC; All Other Ports 3/8 PTC Adjust. 3-Port Straight Manifold; Pilot Port /4 PTC; All Other Ports /4 NPT Optional Normally Open Dump Valve; Gold Body Suspension Dump Valves Optional Normally Closed Dump Valve; Silver Body For CR Type HCV COLAS Raise/Lower Hand Valve Manual raise/lower hand valve for commercial vehicles and trailers Works with single or dual height control valve systems Horizontal or vertical installation with external mounting Optional automatic return to ride height makes valve error proof One component and fewer fittings reduces installation time Available with Push-To-Connect (PTC) fittings /8 Push-To-Connect (PTC) Fittings /4 Push-To-Connect (PTC) Fittings 2

15 Suspension EGP HCV Dual or single circuit operation without extra ports or fittings High grade durable all plastic construction for corrosion protection Optional dump valve available /4 NPT fittings KN27000 Standard Flow with 4 Lever Arm KN2703 High Flow with 4 Lever Arm KN2720 Low Flow (Valve Only) Standard Flow (IR Type Valve Only) Standard Flow with Normally Open IR Type Dump Valve Standard Flow with Dual Ride Height, IR Type; Vertical Arm 20 ; Horizontal Arm 2 ILAS III Integrated Lift-Axle System Valve Integrated lift axle system: responds to pressure in air suspension and automatically lowers the lift axle when loaded. Error proof valve lowers lift axle when unit is loaded Manual version: lift axle is manually raised by pushing button in Automatic version: automatically lifts axle when load is removed Single component reduces assembly time and alleviates complicated plumbing issues Solid structure allows for easy external mounting Push-To-Connect (PTC) fittings should not be used in Canada due to extreme cold ILAS III Manual; /4-8 NPT Threaded Ports ILAS III Automatic; /4-8 NPT Threaded Ports ILAS E Integrated Lift-Axle System Valve Offers a cost effective installation for electronically controlled lift axles Simplified solutions reduce components and fittings Higher air flow provides faster response time of the lift axle Push-To-Connect (PTC) fittings Use with Haldex Trailer Roll Stability (TRS) or with manual electric switch DIN-Bayonet electrical connection Programmable through Haldex Trailer Roll Stability (TRS) for raising and lowering lift axle ILAS E Lift Axle Valve Kit ILAS E Valve ILAS E Power Cable 3

16 Scale-O-Matic Enclosed Manual Switch, Pilot Valve And Silicone Filled Gauge Silicone Filled Gauge with Calibration Decal Large Weather Proof Enclosure Box Small Weather Proof Enclosure Box Consult the Haldex Master Catalog ( for a complete listing of Scale-O-Matic products. Linkage Fixed Rod Linkage must be ordered at the correct length Available in.025 increments from 4.5 to 9 5/8". To order a 4.25 linkage, specify the model number FB4.25-l, for a 6 linkage the model number would be FB6-l. Fixed Loop Linkage must be ordered at the correct length. Available in.025 increments from 4.5 to 9 5/8". To order a 0.5 linkage, specify the model number LP0.5-l, for a 2 linkage the model number would be LP2-l Adjustable Linkage Model SRK 68; 9 5/8 Maximum Manually Operated Valve Small, Self-Relieving Manual Switch All Ports /8 NPT Pilot Valve Activated by applying pilot pressure Remote mounted valve suited for any chassis location Typically used on auxiliary axle applications or to rapidly exhaust air suspensions Port A - /4 NPT; Port B - /8 NPT Consult the Haldex Master Catalog ( for a complete listing of Linkage Products. Port B Port A 4

17 Double Diaphragm Spring Brakes Gold Seal Long Stroke Gold Seal (shown here) - Square ports; embossed or cast-in service instructions. Standard Stroke Gold Seal Round ports; no special tags or embossed service instructions. Haldex Gold Seal Spring Brake is standard equipment on all N.A. built medium and heavy duty trucks, tractors and most popular brand trailers Haldex Gold Seal is the first choice for standard equipment with many of the top national fleets in the US and Canada Every Haldex Gold Seal Spring Brake is backed with a four year, unlimited mileage warranty. See Haldex Warranty Policy L2022 for more details Long Stroke Gold Seal Premium Piloted Diaphragm for straight spring cycling and longer diaphragm life Tethered Dust Plug for easy accessibility Special Heat-Treated Power Spring, producing maximum output force and extended life, is powder- coated for corrosion protection Lightweight, Aluminum Spring Piston for excellent corrosion resistance Aluminum Center Body is durable and lightweight Caging Tool with ACME threads makes caging quick, convenient and easy Double O-Ring Center Seal and Unique Wear Rings extend service life and protect against air leakage between chambers Tamper-Resistant Integral Rolled Seal permanently attaches the spring housing to the aluminum center body to prevent inadvertent disassembly Epoxy Coated Clampbands and Service Return Spring for added corrosion protection Orbital Riveted Adapter Push Rod Discs permanently attached for durability Patented Orange Alert Stroke Indicator is visible when brakes are out of adjustment Zinc Plated Push Rod for added corrosion protection Epoxy Coated 9-Gauge Stud Housing for maximum strength Patented Piloted Dust Shield is designed to enhance automatic brake adjuster operation by maintaining push rod alignment and reducing contaminants in the service chamber 5

18 Double Diaphragm Spring Brakes Life Seal Standard Stroke Life Seal Round ports; no special tags or embossed service instructions. Haldex Life Seal Spring Brake is the industry s first and only sealed double diaphraghm spring brake Haldex Life Seal is the first choice for standard equipment with many of the top national fleets in the US and Canada Every Haldex Life Seal Spring Brake is backed with a six year, unlimited mileage warranty. See Haldex Warranty Policy L2022 for more details Polymer Coated Steel Chamber isolates the power spring preventing all contaminants from entering the spring chamber. No vent holes, no air filters, no caging tool plugs and no external breather tubes Push Rod Housing Tube maintains coil alignment and reduces coil stress and coil clash by guiding the spring piston and power spring on a straight path Internal Valve allows trapped air inside the spring chamber during the caging process to escape through the vehicle air system Integral Caging Tool with grade 8 ACME threads makes caging quick, convenient and easy Special Heat-Treated Power Spring, producing maximum output force and extended life, is powder-coated for corrosion protection Patented Aluminum Form Fit Spring Piston reduces overall actuator length Center Body Seal, Double O-Ring and EGP Bearings reliable sealing even at low temperatures Polymer Coated Clampbands and Service Return Spring for added corrosion protection Patented Orange Alert Stroke Indicator is visible when brakes are out of adjustment Polymer Coated 9-Gauge Stud Housing for durability Patented Piloted Dust Shield is designed to enhance automatic brake adjuster operation by maintaining push rod alignment and reducing contaminants in the service chamber 6

19 Double Diaphragm Spring Brakes GOLD SEAL COMBO PIGGYBACK PIGGYBACK AVAIL. PRODUCT PART NO. PART NO. KITPARTNO. STROKE QTY. PER PKG GC2424 GP Long Stroke GC2424L GP2424L GC2430 GP Long Stroke GC2430L GP2430L Long Stroke GC2430XL GP2430XL Long Stroke/Welded Clevis GC2430XLCW GC3030 GP3030 GP3030K Welded Clevis GC3030CW Heavy Duty GC3030HD Long Stroke GC3030L Long Stroke/Welded Clevis GC3030LCW GP3030L GP3030LK Long Stroke/Heavy Duty GC3030LHD Long Stroke/4 Long Pushrod GC3030LR Standard Stroke/4 Long Pushrod GC3030R GC Long Stroke GC3036L GP Long Stroke/Welded Clevis GC3036LCW GP3036L GC3636 GP Welded Clevis GC3636CW Long Stroke GC3636L GP3636L /4 Diameter Pushrod GC3636Q 3.00 LIFE SEAL COMBO PIGGYBACK PIGGYBACK AVAIL. PRODUCT PARTNO. PARTNO. KITPARTNO. STROKE QTY. PER PKG LC3030 LP3030 LP3030K Welded Clevis LC3030CW Heavy Duty LC3030HD Long Pushrod LC3030R

20 SERVICE CHAMBER PRODUCT TYPE 9 TYPE 2 TYPE 6 TYPE6 - Long Stroke TYPE 20 TYPE 20 - Long Stroke TYPE 20 - Long Stroke Welded Clevis TYPE 24 TYPE 24 - Long Stroke TYPE 24 - Extra Long Stroke TYPE 24 - Extra Long Stroke Welded Clevis Service Chambers TYPE 30 TYPE 30 - Welded Clevis TYPE 30 - Long Stroke TYPE 30 - Long Stroke Welded Clevis TYPE 36 Steel Pressure Housing World Class Diaphragm Barrel Return Spring Sturdy Steel Stud Housing Haldex Service Chambers are standard equipment on all N.A. built medium and heavy duty trucks and tractors Every Haldex Service Chamber is backed with a three year, 350,000 mile warranty (See Haldex Warranty Policy L2022 for more details) SERVICE CHAMBER PART NO. SC09 SC2 SC6 SC6L SC20 SC20L SC20LCW SC24 SC24L SC24XL SC24XLCW SC30 SC30CW SC30L SC30LCW SC36 AVAIL. STROKE Maxibrake Spring Brakes Complete spring brake All steel construction Rugged/Corrosion resistant QTY. PER PKG. Replacement Parts PRODUCT Boot Assembly for 5/8 Pushrod T-20 Clampband Kit T-24 Clampband Kit T-30 Clampband Kit Clevis FD - /2 Pin Clevis FD - 5/8 Pin Clevis FD - /2 Pin - 3/4-6UNF Clevis FD - 4MM Pin - M6x.5 Clevis FD - /2 Stainless Pin Clevis Pin - /2 Clevis Pin - 5/8 T-20 Diaphragm T-20 LS Diaphragm T-24 and T-24 LS Diaphragm T-24 EX LS Diaphragm T-30 Diaphragm T-30 LS Diaphragm Dust Shield - 5/8 - Black Dust Shield - 3/4 - Black HW KIT - Lk Wsr & Nut - 5/8-UNC HW KIT - Wsr & Lk Nut - 5/8-UNC Jam Nut - 5/8-8UNF Jam Nut - M6x.5 CL Band Nut & Bolt - 3/8-24UNF Elbow - Street 90-3/8-8NPTF Pipe Plug - Square Head - 3/8-8NPTF T-30 Service Push Rod - 5/8-8UNF T-30 Service Push Rod - 3/4-4UNF Spring - RT Gold & Life Seal 3030 Spring - RT All Other Except 3636 & RS5 Spring - RT 3636 Release Tool - All DDSB Except 3036/3636 Release Tool & 3636 Release Tool - Remote Chamber Release Tool Plug - All DDSB Exc 3036/3636 Release Stud Plug - Old Midland Style Release Tool Plug & 3636 PART NO. BA CB20 CB24 CB30 CF2 CF3 CF4 CF5 CF0 CP CP2 DP20 DP20L DP24L DP24XL DP30 DP30L DS3 DS4 HW2 HW3 HW5 HW6 HW8 HW0 PP PR30 PR30S RS5 RS6 RS7 RT RT2 RT3 RTP RTP2 RTP3 Maxibrake H Series QTY. PER PKG For Durapark system spring brake only All steel construction Rugged/Corrosion resistant design MAXIBRAKE PRODUCT 2475 Universal Spring Brake 2475 REMAN 3075 Universal Spring Brake 3075 REMAN 3675 Universal Spring Brake 3675 REMAN 8 MAXIBRAKE PART NO. MA5775 MA5775X MA5777 MA5777X MA5779 MA5779X AVAIL. STROKE MAXIBRAKE PRODUCT H-Series Hydraulic Spring-Set Brake H-Series Hydraulic; Remanufactured H-Series Hydraulic with Elbow Fitting H-Series with Elbow Fitting; Reman. H-Series Air Spring; Remanufactured MAXIBRAKE PART NO. MA5500 MA5500X MA5502 MA5502X MA5504X AVAIL. STROKE

21 7-Way Plugs & Receptacles HEAVY DUTY DIE CAST PLUGS Durable zinc, diecast housing for rugged service Meets requirements of SAE J560 Brass terminal pins for maximum current carrying ability Fully interchangeable with other SAE Type, 7-way plugs B20260 B20540 BE23783 BE23784 Replacement Insert Spring Guard Only Trailer Plug Assembly Only Trailer Plug Assembly with Spring Guard HEAVY DUTY DIE CAST RECEPTACLE Durable zinc, diecast housing for rugged service Meets requirements of SAE J560 Brass terminal pins for maximum current carrying ability Fully interchangeable with other SAE Type, 7-way receptacles Wire insertion style B2026 B20500 BE6797 BE23703 Replacement Insert Receptacle Boot Metal Door Lid Kit Receptacle Assembly - Split Pin HEAVY DUTY POLY PLUG & RECEPTACLE DIE CAST AUXILIARY FOR SECONDARY CABLES Meets auxiliary requirements of SAE J560 (replaces ISO 373) For use with secondary cable for auxiliary requirements Male ground pin on plug and female ground pin on receptacle prevent mixed connections B20500 BE2372 BE23790 Receptacle Boot Auxiliary Receptacle w/die Cast Housing Auxiliary Plug w/die Cast Housing and Spring Guard TWO POLE PLUG & RECEPTACLE TAILGATE CONNECTORS One Positive - One Negative Pole 200 AMP Capacity Terminals Accept 4 Gauge Cable Receptable Lug - Stud Hole Size /4 B20500 BE2320 BE23202 Receptacle Boot Receptacle Assembly Plug Assembly w/spring Guard SINGLE POLE PLUG & RECEPTACLE TAILGATE CONNECTORS Plated Copper Grounding Lug. 300 Amp Capacity Plug Grounding Lug Accepts 4 Gauge Cable Receptable Lug - Stud Hole Size 5/6 BE6730 BE23707 BE23709 BE2377 Plug Assembly w/spring Guard Receptacle Assembly - Ring Terminal Receptacle Assembly - Bullet Terminal Receptacle Assembly - Wire Insert Style B20500 BE230 BE2302 Receptacle Boot Receptacle Assembly Plug Assembly w/spring Guard 9

22 7-Way Plugs & Receptacles (cont d) CIRCUIT BREAKER STYLE RECEPTACLES WITHOUT HOUSING Receptacle only AMPS Ratings from 5-30 AMPS Mounting centers of 4 /2 and an overall height of 2 /2 Mounts in 4 opening Zinc plated split brass pins 6-Way Plug & Receptacle Quality zinc casting with Engineering Grade Composite (EGC) inserts BE24000 Receptacle Without Housing - Less Breaker BE AMP Receptacle Without Housing BE AMP Receptacle Without Housing BE AMP Receptacle Without Housing BQ24002 Cover Assembly BE23602 BE23603 BE Way Receptacle 6-Way Plug 6-Way Plug with Spring Guard DIE CAST RECEPTACLE WITH LARGE MOUNTING PLATE Meets requirements of SAE J560 Split pin, wire insertion Not equipped with circuit breakers Dedicated ground or ground connection is through mounting plate Gasket Included 4-Way Plug & Receptacle Quality zinc casting with Engineering Grade Composite (EGC) inserts BE6797 BE23705 Metal Replacement Lid Kit Receptacle With Large Mounting Plate DIE CAST CIRCUIT BREAKER STYLE RECEPTACLE WITH POLY HOUSING AMPS Ratings from 5-30 AMPS Industry standard for trailer applications Zinc plated split brass pins Gaskets Included Housing Depth: 3/4 Overall Depth: 2 3/4 BE245 BE2420 BE AMP 20 AMP 30 AMP BE23402 BE23403 BE23404 One end for plug One end for receptacle Stainless steel brushes One-year warranty BE Way Receptacle 4-Way Plug 4-Way Plug with Spring Guard 7-Way Terminal Cleaner 20

23 Coiled Cables GAUGE WIRES LEADS 2 5 Black Light Duty Powercoil w/spring Guard - Non-ABS /2, 6/4 2@2 BE27039 BE2709 Black Standard Duty Powercoil w/spring Guard - Non-ABS /0, 6/2 2@2 BE27029 BE2703 Green Ultra Heavy Duty ABS Powercoil w/spring Guard /8, 2/0, 4/2 2@2 BE27070 BE2707 Green Ultra Heavy Duty ABS Powercoil w/spring Guard /8, n/a BE27072 Green Ultra Heavy Duty ABS Powercoil w/spring Guard /8, n/a BE27073 Yellow ABS and Auxiliary Plug Powercoil w/spring Guard /8, 2/0, 4/2 2@2 n/a BE27096 Electro-Pneumatic Switches LOW AIR SWITCH Actuates at 66 PSI Single pole, two terminal Circuit position normally open /8-27 NPT Threads Available in 2V or 24V BE324 TRACTOR SPRING BRAKE CIRCUIT LIGHT SWITCH Actuates at 55 PSI Single pole, two terminal Circuit position normally closed /8-27 NPT Threads Available in 2V or 24V BE3240 TRAILER EMERGENCY STOPLIGHT SWITCH Actuates at 55 PSI Single pole, double throw, three terminal Circuit position normally one open, one closed /8-27 NPT Threads Available in 2V or 24V BE3255 SERVICE CIRCUIT STOPLIGHT SWITCH Actuates at 3-5 PSI Single pole, two terminal Circuit position normally open /4-8 NPT Threads Available in 2V or 24V BE3250 Electric Trailer Brake Controllers PRIMUS TM IQ BRAKE CONTROL Works proportionally in reverse No level adjustment necessary, adjusts to varying terrain as you drive Digital display shows voltage to trailer during braking Boost feature allows for customized braking Pre-assembled wire harness for simple hook-up and quick disconnect Diagnostic features incorporated in LED display Electric trailer brake control for up to three axles Limited Lifetime Warranty (some conditions apply) BE9055 VOYAGER BRAKE CONTROL Built to replace the Mark 2 (BE3022) and Mark 24 (BE30224) One-third the size of the Mark 2 and Mark 24 Application for 2 or 4 wheel brakes BE

24 SINGLE CONDUCTOR PVC PRIMARY WIRE SAE J28 TYPE GPT 300 Volts Poly-vinyl insulation with superior abrasive strength Highly resistant to acid, grease, oil and gasoline Compounded to incorporate moisture resistance and desirable aging characteristics Standard package 00 spool (Also available in mini-spools) Single Conductor PVC 8 GAUGE BE2840 BE284 0 GAUGE BE2842 BE2843 BE2845 BE GAUGE BE2850 BE285 BE2852 BE2853 BE2854 BE2855 Primary Wire Black Red Black Blue Red White Black Blue Green Red Yellow White 4 GAUGE BE2858 BE2859 BE2860 BE286 BE2862 BE2863 BE GAUGE BE2866 BE2867 BE2868 BE2869 BE2870 BE287 BE GAUGE BE2874 Black Blue Green Red Yellow White Brown Black Blue Green Red Yellow White Brown Black JACKETED TWO CONDUCTOR Meets SAE J28, Type GPT specifications Black, White Conductor Color Covered with gray PVC jacket Standard package 00 spool JACKETED THREE CONDUCTOR Meets SAE J28, Type GPT specifications Black, Green, Red Conductor Color Covered with gray PVC jacket Standard package 00 spool BE28820 BE2882 BE Gauge 4 Gauge BE Gauge Multi-Conductor Wire 6 Gauge BONDED THREE CONDUCTOR Meets SAE J28, Type GPT specifications Brown, Yellow, Green Conductor Color Standard package 00 spool BONDED FOUR CONDUCTOR Meets SAE J28, Type GPT specifications Brown, White, Green, Yellow Conductor Color Standard package 00 spool 22 BE Gauge BE28826 BE Gauge 4 Gauge

25 POST TYPE HEAVY DUTY UNIVERSAL BATTERY TERMINAL /0 Gauge 3-way Top Terminal Set (One Neg./One Pos.) BE2079 FLEET HEAVY DUTY UNIVERSAL BATTERY TERMINAL For temporary repair battery terminals. Universal, Clamp Type. 2/0 To 4/0 Gauge Cable. Battery Hardware REPLACEMENT BOLT AND NUT FOR 50 SERIES BE3805 UNIVERSAL STYLE TERMINAL CONVERTER BE3807 BE2096 COPPER LUG - CLOSED TYPE BATTERY TERMINAL BE2040 BE204 BE2042 BE2043 BE2044 BE2045 BE2047 4/0 Gauge; /2 Stud 4/0 Gauge; 3/8 Stud 3/0 Gauge; /2 Stud 3/0 Gauge; 3/8 Stud 2/0 Gauge; 3/8 Stud 2/0 Gauge; /2 Stud /0 Gauge; 3/8 Stud TOP POST - BATTERY TERMINAL Tin-plated Copper Alloy BE20222 BE20223 BE20224 BE20225 /0 Positive /0 Negative 2/0 Positive 2/0 Negative STUD NUTS - GROUP 3 BATTERIES Stainless Steel Universal polarity BE2000 HEAVY DUTY TRUCK JUMPER CABLES AND GROUND STRAPS BE2066 2/0 Gauge; 2 ; Top Post to Top Post BE2072 4/0 Gauge; 2 Ground Strap BE3800 2/0 Gauge; 8 ; Anti-Rotational Lugs; Top Stud to Top Stud BE380 2/0 Gauge; 2 ; Anti-Rotational Lugs; Top Stud to Top Stud BE490 4/0 Gauge; 8 Ground Strap BOOSTER CABLE & ACCESSORIES BE3800 BE38002 BE Booster Cable 6 Booster Cable 500 Amp Clamp Set WELDING CABLE High grade soft annealed copper conductor High strand count for superior flexibility Jacketed with an oil-resistant black neoprene cover BE2880 BE2884 4/0 Ga./25 Coil/.40 Nom. O.D. Minimum 48 Strands 2/0 Ga./25 Coil/.634 Nom. O.D. Minimum 273 Strands 23

26 Battery Hardware (cont d) BATTERY AND STARTER CABLES Conductors are made of high grade soft annealed copper High strand count for flexibility Meets the requirements of SAE J27 - Type SGT Cable is jacketed with a specially formulated abrasion resistant PVC NOM O.D. COIL COIL 4 Gauge/Red BE28809 BE Gauge/Red BE2886 BE2887 Gauge/Red n/a BE28800 /0 Gauge/Black 0.54 BE28808 BE /0 Gauge/Black BE28805 BE /0 Gauge/Black BE28807 BE /0 Gauge/Black BE2888 n/a IGNITION KEY SWITCH Universal ignition starter switch 4 post connection Acc./off/on/start Waterproof o-ring sealed and has pick proof lock BE20097 AXLE SHIFT SWITCH Two speed Zinc diecasting Rubber cover BE20098 Switches MASTER DISCONNECT SWITCHES Lever operated S.P.S.T. OFF-ON Two Stud Terminals BE20068 D.P.S.T. For alternator or generator system BE20070 BLACK NON-ABS TRAILER CABLES Up to 0% more copper content than required by SAE J28 High conductor strand count for excellent flexibility Flexibility down to temperatures of 85 F (-65 C) Up to three times more abrasion resistant than competitive cables NOM O.D. COIL COIL Light Duty 4/4; 4-Way BE2844 BE2845 6/4; 6-Way BE2864 BE2865 6/4, /2; 7-Way*0.554 BE2874 BE2876 Standard Duty 6/2, /0; 7-Way 0.58 BE2872 BE2875 * Also available in 250 Coil (P/N BE28727) PUSH-PULL SWITCH (EXTRA HEAVY DUTY) S.P.S.T ON-OFF 75 AMP, 6-28 Volts Stem: 5/8 Long; 5/32 Dia. Thread Chrome Plated, Diecast Knob BE2005 TOGGLE SWITCH U/L Listing: 20 AMP S.P.S.T. ON-OFF - 2 Screws BE20085 MOMENTARY PUSH SWITCH 60 2V; 40 24V Weather and Dust Proof Construction Silver Contacts Flush terminal screws Stem: 5/8 Long; 5/8 Dia. Thread BE20065 BUZZER Truck low air pressure and bus rear door warning signal 2V - Two Screw Terminals BE22638 STARTER SOLENOID 85 2 V Continuous Duty Insulated Base Operating Coil Connections BE

27 Haldex Air Treatment Products DRYest AIR DRYER Uses MTC+ 5-stage desiccant cartridge for superior drying and long service life Integrated turbo protection valve prevents loss of engine turbo Compact size makes installation easy, even as a drop-in dryer Built-in heater prevents freeze-ups Purge Tank Kit - Part # Heater System Internal Voltage Regen. Governor DA Volt X DA Volt X DA350* 2 Volt DA355* 24 Volt DA Volt X X DA Volt X X DA3520* 2 Volt X DA3525* 24 Volt X DA35220* None X *For use with external purge tank. CONSEP CONDENSER/SEPARATOR Condenses and separates oil, water and other contaminants in compressed air line, substantially increasing desiccant life Includes Haldex Automatic Drain Valve (ADV) Ideal for transit and heavy braking applications Installs between compressor and air dryer, or can be used as a stand alone unit Purges contaminants with each brake application Volt Volt MTC+ Multi-Treatment Cartridge Serpentine path makes MTC+ more efficient and extends dryer service life Different sized desiccant creates over 26% more surface area than competitor s single desiccant cartridge Service is quick and easy with 4-bolt slide in-and-out design Stage : Aluminum Mesh for solid particles Stage 2: Large Desiccant for oil & water droplets Stage 3: Medium Desiccant for oil & water vapor Stage 4: Small Desiccant for water vapor Stage 5: Dust Filter for ultra-fine particles Part # DQ6050 PURest MTC+ Kit DRYest and ModulAir MTC+ Kit PURest AIR DRYER Uses MTC+ 5-stage desiccant cartridge for superior drying and long service life Includes universal mounting bracket Integrated turbo protection valve prevents loss of engine turbo MTC+ Cartridge attaches with only 4 bolts, making for easy servicing and time savings DA3400 DA340 DA3460 DA34200 Heater Voltage 2 Volt 24 Volt 2 Volt without Bracket 2 Volt with Econ Valve MODULAIR AIR DRYER Large MTC+ 5-stage desiccant cartridge eliminates more contamination than single stage competitors (9.2 SCF drying capacity) Heat resistant brass turbo protection valve lasts longer than plastic composite valves Complete plug-n-play changeover from Bendix AD-IS system Three-year warranty Heater System Internal Voltage Regen. Governor DA3600 2V & 24V X X DA V & 24 V Requires X External Purge EXTERNAL PURGE TANK KIT FOR MODULAIR DQ6058 DQ6060 DQ606 DQ6063 DQ6064 Kenworth T Series Kenworth W 900 Series Navistar Pro Series Peterbilt Kenworth (Behind the Cab) ALCOHOL EVAPORATOR Easy to install Holds 40 oz. of Methyl Alcohol. Pressure protected The alcohol evaporator is an automatic vaporizing device for keeping air lines and air reservoirs free of ice. A

28 New and Remanufactured Bendix Air Dryers & Cartridges 09477X 09685X 0999X X 6504X AD-4 SUPPLY DELIVERY CONTROL HEATER VOLTAGE NOTES 6504X /2 /2 /4 2 Volt AD-4 Cartridge X AD-4 Fleet Svc. Kit MKX AD-9 SUPPLY DELIVERY CONTROL HEATER VOLTAGE NOTES /2 3/4 /4 24 Volt New AD-9 Dryer Soft Seat Purge /2 /2 /4 2 Volt New AD-9 Air Dryer 09685X /2 /2 /4 2 Volt AD-9 Cartridge X AD-9 Fleet Svc. Kit MKX AD-IP SUPPLY DELIVERY CONTROL HEATER VOLTAGE NOTES 09477RX /2 /2 /4 2 Volt CoreFreeTM AD-IP Cartridge RX 09477X /2 /2 /4 2 Volt Reman AD-IP Cartridge X New AD-IP Cartridge K AD-IS SUPPLY DELIVERY CONTROL HEATER VOLTAGE NOTES X /4 /4 /4 2 Volt New AD-IS Cartridge K X /4 /4 /4 2 Volt AD-IS With Extra Purge Volume AD-SP SUPPLY DELIVERY CONTROL HEATER VOLTAGE NOTES 0999X /2 /2 /4 2 Volt New AD-SP Cartridge K AD-SP Purge Valve Kit K Bendix AD-IS Governor/Check Valve Replacement Kit Non-adjustable governor and check valve made specifically for use with the Bendix AD-IS Air Dryer K WABCO Air Dryers SS200 SUPPLY DELIVERY CONTROL HEATER VOLTAGE NOTES /2-4 FPT/2-4 FPT /4-8 FPT 2 Volt New SS200 Compact Air Dryer X /2-4 FPT/2-4 FPT /4-8 FPT 2 Volt SS200 Cartridge K 26

29 Gladhands CONVENTIONAL STYLE Economical heavy duty gladhand available in aluminum body/steel face or cast iron body Polarized and color coded in service configuration for easy identification of airlines Interchangeable with most competitive gladhands. Aluminum/Steel units come with Internal filter installed to protect airline from contamination ALUMINUM/STEEL 450 Universal; Seal Service: Seal Emergency; Seal 0028 CAST IRON A77770 Service; Seal 0029 A7777 Emergency; Seal 0029 A86300 Universal; Seal 0029 BRACKET MOUNT STYLE Bracket mount eliminates the need for additional mounting panels, lowering overall cost Heavy duty design projects 3.95 from mounting surface Polarized and color coded in service configuration for easy identification of airlines Includes 0028 Dual Lip Seal, 0035 Filter and loose 3/8 or /2 plug 440 Service; 3/8-8 Ports 44 Emergency; 3/8-8 Ports 444 Service; /2-4 Ports 445 Emergency; /2-4 Ports QRG (QUICK RELEASE GLADHAND) Unique patented design with built-in quick release valve Heavy Duty aluminum body and steel face Zinc yellow dichromate steel and chromate conversion coated aluminum. Improves brake release timing by up to 67% Replaces service gladhands on the nose of the trailer 483 Nipple Mount Bracket Mount RN58A Repair Kit Dual Lip Seal Part # 0028 Compression Seal Part # 0029 Nipple Mount Bracket Mount Gladhand Grips Color-coded plastic handle Stainless steel screws Non-slip hex-shaped body is made from a high-impact UV-resistant polymer (shatter-proof) Inside edges are beveled which eliminates the hose-chafing sharp edge common in other designs 405 (pair - one red/one blue) Reservoirs SADDLE-MOUNTED, SINGLE COMPARTMENT Long life internal and external corrosion protection Conform to SAE J0B specs Certified to 50 PSI working pressure. /4 drain port in bottom Two 3/8 charging ports, one each end Cu. In. Volume; () 3/4 Valve Mounting Port; 8 Diameter; Mounting Center Cu. In. Volume; (2) 3/4 Valve Mounting Ports; 2 Diameter; Mounting Center 29 / Cu. In. Volume; (2) 3/4 Valve Mounting Ports; 9 /2 Diameter; Mounting Center 27 /2 Coiled Air Hoses Coiled, /2 O.D., reinforced nylon tubing Excellent coil memory and durability Color coding (red-emergency / blue-service); Meets SAE J844 and DOT FMVSS 06 /2 NPT each end Male pipe - brass fittings; heavy duty plated spring guards Designed for 50 PSI operating systems Resistant to attack by gasoline, diesel fuel, methyl-alcohol and zinc chloride Working temperature range is -40 F to +99 F Sets include one red and one blue coil ; 6 Lead ; 2 Lead ; () 48 Lead; () 2 Lead ; () 48 Lead; () 2 Lead Additional information is available in the Haldex Master Catalog ( 27

30 28 AIR HOSE ASSEMBLIES 3/8 I.D. x 3/4 O.D. Type B - permanent fittings Made in strict accordance with SAE J402 and DOT 06 specifications /4 Ends 3/8 Ends 3/8 Ends One Fixed Both Ends One Fixed One Swivel Swivel One Swivel HOSE END FITTINGS - USE WITH BULK 3/8 I.D. HOSE 906 (A) Nut (for fitting without spring) 907 (B) Body; /4-NPT 908 (B) Body; 3/8-NPT 909 (B) Body; /2-NPT 90 (C) Nut (for fitting with spring) 9 (D) Spring 92 (E) Ferrule 94 (F) Union Fitting Body Air Hoses AIR HOSE ASSEMBLIES /2 I.D. x 7/8 O.D. Type B - permanent fittings Made in strict accordance with SAE J402 and DOT 06 specifications Hose rack - Part # B Assortment with hose rack - Part #DQ6002 3/8 Ends 3/8 Ends One Fixed Both Ends One /2 Fixed End One Swivel Swivel One 3/8 Swivel End Air Hose Fittings and Accessories A B C D E F RENEWABLE HOSE END FITTING ASSEMBLIES - USE WITH 3/8 I.D. HOSE 900 (A) /4-NPT Male End with Spring 90 (A) 3/8-NPT Male End with Spring 902 (A) /2-NPT Male End with Spring 903 (B) /4-NPT Male End without Spring 904 (B) 3/8-NPT Male End without Spring 905 (B) /2-NPT Male End without Spring 93 (C) Hose Union AIR LINE FILTER ASSEMBLIES Removable and replaceable filter element Can be used in both emergency/service lines 480 Complete Assembly N297B Replacement Filter RN3A Repair Kit 3-IN- AIR POWER LINE Power Line is fully ABS compatible. Improved kink resistance versus coiled hoses, particularly in cold weather Air lines have factory crimped swivel fittings at tractor end for quick installation Stainless steel hanger bracket mounting assembly included for easy suspension Red and blue hose grips for easy identification and gladhand connection BE BE BE BE Stainless Steel Hanger Service Air Line - SAE J402 Rubber Emergency Air Line - SAE J402 Rubber ABS Power Line (Green) - Flexible in Cold Weather Enclosed in Heavy Duty, Bevelled Edge Spiral Wrap A B C

31 FLEXASTIKS OE hose support pogo sticks Available with spring only, or with various mounting items ZINC DICHROMATE Accessories HOSE SUPPORT HOSE LENGTH CLAMP BRACKET RING SUPPORT SPRINGS ZINC DICHROMATE FINISH /2 ; /8 Coil O.D ; 3/4 Coil O.D ; Coil O.D ; /6 Coil O.D HOSE CLAMPS Hole; 3/8 I.D. 2-Hole; 3/8 I.D.; Rubberized For Coiled Airlines Hole; 3/8 I.D. 3-Hole; 3/8 I.D. HOSE SEPARATORS Molded White (EGC) Engineering Grade Composite Snap Connect 548 For 3/8 I.D. Hose 549 For /2 I.D. Hose HOSE COUPLER WITH CHAIN HOSE SUPPORT BRACKET Zinc & Yellow For Current Design Dichromate Body Flexastiks 40 (w/vent hole) (w/o vent hole) Hole; 3/8 I.D.; 3-Hole; 3/8 & /2 I.D. Rubberized For Coiled Airlines Hole; 3/8 & /2 I.D. 3-Hole; 3/8 & /2 I.D Hose Ring Assembly; Stainless Steel 3/8 & /2 I.D. Hanger, Use with Use with ABS Power Lines 29

32 Manual Brake Adjusters MANUAL BRAKE ADJUSTERS - STRAIGHT ARM Forged steel 26,000 in. lbs. Bi-directional design Clevis Bushing Part # MANUAL BRAKE ADJUSTERS - 5/8 OFFSET ARM Ductile iron 20,000 in. lbs. Right and left hand Clevis Bushing Part # ARM LENGTH SPLINE KN /8-37 KN , 6.0 /2-28 KN , 6.5 /2-28 KN , 6.0, 7.0 /2-0 KN , 5.5 /2-0 KN , 6.5 /2-0 KN , 6.0 /2-0 KN , 6.0 /4-0 KN , 5.5 /4-0 KN , 5.0 /4-40 KN /2-48 KN , 5.0 /2-48 KN /4-24 ARM LENGTH SPLINE KN49000 RH 4.5, 5.5 /4-0 KN4900 LH 4.5, 5.5 /4-0 KN49020 RH 4.0, 5.0, 6.0 /4-0 KN49030 LH 4.0, 5.0, 6.0 /4-0 KN50000 RH 4.5, 5.5 /2-0 KN5000 LH 4.5, 5.5 /2-0 KN50060 RH 4.0, 5.0, 6.0 /2-0 KN50070 LH 4.0, 5.0, 6.0 /2-0 KN53000 RH 5.0, 6.0 /2-28 KN5300 LH 5.0, 6.0 /2-28 KN53020 RH 5.5 /2-28 KN53030 LH 5.5 /2-28 KN54000 RH 5.5 /4-24 KN5400 LH 5.5 /4-24 Automatic Brake Adjuster Quick-Reference Guide Application Standard Application Tractor Mack Truck Applications (with 3 and longer camshaft tubes) Meritor Air Disc Brake Kenworth with 8 Bag Air Ride (to avoid interference with air bag supports) Trailer Arm ABA Kit Anchor S-ABA Kit Spline Length Part # Bracket Style Part # / Strap / Strap / , Strap / Strap / Clamp / * Spider Mounted n/a / Clamp n/a / Clamp / Strap n/a / Strap n/a / Strap n/a / Strap / Plate & Flat Stud / Plate & Flat Stud / Plate & Flat Stud / Plate & Flat Stud / Plate & Flat Stud / Plate & Flat Stud *For short camshaft tube Mack, 2" or less.

33 Haldex AA Automatic Brake Adjuster Installation indicator confirms correct installation Chrom-moly gears and a buttress tooth configuration on the gears reduce stress and prolong service life Compatible with all major brand clevises Heat treated components reduce internal wear and provide longer service life,000,000 Mile, 6 year on-highway warranty ARM ANCHOR LENGTH SPLINE BRACKET STYLE * 6.0 /2-28 Spider Mounted , 6.0 /2-28 Strap /2-28 Strap /2-28 Strap , 6.0 /2-0 Strap /2-0 Strap /2-0 Strap ** 6.0 /2-28 Clamp /2-0 Clamp , 6.5 /2-28 Clamp ARM ANCHOR LENGTH SPLINE BRACKET STYLE /2-0 Strap /2-28 Strap /2-28 Plate & Flat Stud /2-28 Plate & Flat Stud /8-37 Plate & Flat Stud /8-37 Plate & Flat Stud /2-0 Plate & Flat Stud /2-0 Plate & Flat Stud /2-28 Strap /2-0 Strap * For short camshaft tube Mack, 2 or less. ** For Mack Truck with 3 and longer camshaft. Haldex S-ABA Automatic Brake Adjuster Incorporates AA High Standard Features. Plus Centrailized Clutch and Unique Self-Setting Design ARM ANCHOR BRACKET LENGTH SPLINE BRACKET STYLE /2-28 Plate & Flat Stud /2-28 Plate & Flat Stud /8-37 Plate & Flat Stud /8-37 Plate & Flat Stud /2-0 Plate & Flat Stud /2-0 Plate & Flat Stud /2-0 Strap /2-28 Strap /2-0 Strap /2-28 Strap /2-0 Strap /2-28 Clamp /2-0 Clamp S-ABA allows the control arm to be set at any angle from minus 6 to 24 degrees. Consult the Haldex Master Catalog ( for a complete listing of Brake Adjusters offered. 3

34 New and Remanufactured Water Pumps CATERPILLAR ENGINE Bolt On Pulley CUMMINS ENGINE - BIG CAM III Multi-Groove Pulley RW62 RW62RX RW62X New Reman CoreFree TM Reman RW70 RW70RX RW70X New Reman CoreFree TM Reman CATERPILLAR ENGINE 3406 B/C Flat Gear CUMMINS ENGINE - SMALL CAM 2-Groove Pulley RW94 New RW94BPK Back Plate Kit RW94PRX Premium Reman CoreFree TM RW94PX Premium Reman RW7 RW7RX RW7X New Reman CoreFree TM Reman CHEVY/GMC , 6.0, 6.2L Light/Medium Duty Engine RW652 New CUMMINS ENGINE - BIG CAM IV Multi-Groove Pulley RW72 New RW72RX Reman CoreFree TM RW72X Reman CHEVY/GMC , 6.0, 6.2L Light/Medium Duty Engine RW939 New CUMMINS IDLER - BIG CAM Multi-Groove Pulley RW73 RW73RX RW73X New Reman CoreFree TM Reman 32

35 New and Remanufactured Water Pumps CUMMINS IDLER - SMALL CAM 2-Belt Pulley RW75 RW75RX RW75X New Reman CoreFree TM Reman DODGE , 5.7L Includes Bypass Tube RW438 New CUMMINS 2007 ISB DODGE RW2060 New RW8747 New CUMMINS KIT - BIG CAM RW3000 New Water Pump/Idler Kit FORD :, 5.4L Light/Medium Duty Engine RW694 New DDC - 60 SERIES Gear Driven; Premium Seal RW422PLK Plastic Backing Plate Kit RW422STK Steel Backing Plate Kit RW423PRX Premium Reman CoreFree TM RW423PX Premium Reman RW423RX Reman CoreFree TM RW423X Reman ISUZU, MACK, MERCEDES AND NAVISTAR ON NEXT PAGE. 32a

36 New and Remanufactured Water Pumps ISUZU NPR 3.9L Without Bypass Tube MERCEDES - MBE L, MBE L Bus RW907 New RW2044 New ISUZU NPR 4BD2 With Bypass Tube RW908 New NAVISTAR ENGINE - DT466 Belt driven RW30X RW633 Reman New MACK ENGINE - MAXIDYNE.57 Long Shaft; No Pulley NAVISTAR ENGINE Maxxforce 9.0L, 0.0L RW200 RW200X New Reman RW2052 New MACK ENGINE - ECONODYNE Charged Air; No Pulley RW2002 RW2002X New Reman Haldex offers a complete line of New and Remanufactured Water Pumps. Please consult the Haldex Master Catalog ( for a detailed listing of the water pump product offering. 32b

37 ABS (Anti-Lock Braking System) Valves 2S/M ABS RELAY VALVE KIT Dollies and Single Axle Applications AQ ABS Relay Valve (2 Port, 2V, /2 Res., 3/8 Cont., 3/8 Del.) ECU Design PLC Select 6.0m Power Cord Extensions 2.5m 90 Sensors and Clips 4S/2M ABS RELAY OR FFABS VALVE KIT New Trailer Build Solutions ECU and ABS Valve are designed to be serviced separately ECU Design - PLC Select 2M 2S/M FFABS VALVE KITS Multi-Axle Applications New trailer placement; non-steer axles Pre-installed reservoir nipple with swivel and locknut feature assures easy serviceability AQ Shown ECU and ABS Valve are designed to be serviced separately 4-Port Valve: 3/4 Nipple; 2V; 3/8 Ports; Spring Brake Priority AQ AQ AQ96402 AQ x2m Power Cord; 2.5m Full 90 Sensors and Clips 20x2m Power Cord; ABS Light Kit; 2.5m Sensor Ext. 2.5m Sensor Extensions 6.0m Power Cord Extension; 2.5m Sensor Extensions AQ AQ Shown 2-Port ABS Relay Valve; Tandem Axles; /2 Res. Port; 2V; 3/8 Cont.; 3/8 Del.; 6m Power Cord Ext.;.5m and 2.5m Sensor Extensions AQ Port ABS Relay Valve; Tri-Axles; /2 Res. Port; 2V; 3/8 Cont.; 3/8 Del.; 6m Power Cord Extension; 2m and 3m Sensor Extension AQ Port FFABS Valve; Tri-Axles; 3/4 Nipple; 2V; 3/8 Ports; Spring Brake Priority AQ Port FFABS Valve; Tandem Axles; 3/4 Nipple; 2V; 3/8 Ports; Spring Brake Priority 2S/M RELAY VALVE KITS Multi-Axle Applications Competitive replacement For non-steer axles Cost effective solution for competitive system change-out ECU and ABS Valve designed to be serviced separately AQ Shown 6-Port ABS Relay Valve: /2 Res. Port, 2V, 3/8 Control, 3/8 Delivery 2S/M 6-Port Multi-Axle Kit AQ m Power Cord Extension; 3.0m Sensor Extensions 2S/M 6-Port Tandem Spring Suspension Kit AQ m Power Cord Extension; 2.0m Sensor Extensions 4-Port ABS Relay Valve: /2 Res. Port, 2V, 3/8 Control, 3/8 Delivery, Special Mounting Bracket 2S/M 4-Port Tandem Air Ride Suspension Kit AQ m Power Cord Extension; 2.5m Sensors and Clips; All Miscellaneous Hardware Required 2S/M 4-Port Multi-Axle Kit AQ m Power Cord Extension; 2.5m Sensors and Clips 33

38 ABS (Anti-Lock Braking System) Valves 4S/2M ABS KITS Primarily Competitive Change-Out Cost effective solution for competitive system change-out ECU and ABS Valve are designed to be serviced separately AQ Port Valve; Dual Nipple /2 and 3/4 ; 2V; 3/8 Ports; Spring Brake Priority; 2 Port Relay Valve and Associated Cables and Accessories Included. FFABS 2-Port and 4-Port Delivery 2-Port Delivery Single Axle Applications (2S/M or 4S/2M) AL /2 & 3/4 Nipple; 2V; 3/8 Ports Service Brake Priority AL43064 Shown AQ Port Valve; Dual Nipple /2 and 3/4 ; 2V; 3/8 Ports; Spring Brake Priority; 2 Port Relay Valve and Associated Cables and Accessories Included. ABS RELAY VALVE 2-Port and 6-Port Delivery AL AL AL /2 & 3/4 Nipple; 2V; 3/8 Ports Spring Brake Priority /2 & 3/4 Nipple; 2V; 3/8 Ports Spring Brake Priority (4-SB Port) /2 & 3/4 Nipple; 2V; 3/8 Ports Service Brake Priority (4-SB Port) 2-Port Delivery Single Axle Applications (2S/M or 4S/2M) AL AL AL Port Delivery /2 Reservoir Mount; 2V; 3/8 Ports /2 Frame Mount; 2V; 3/8 Ports /2 Reservoir Mount; 24V; 3/8 Ports 6-Port Delivery Multiple Axle Applications (2S/M); Three or More Axles (4S/2M) AL36404 AL AL Shown - 6-Port Delivery /2 Reservoir Mount; 2V; 3/8 Ports /2 Frame Mount; 2V; 3/8 Ports 4-Port Delivery Multiple Axle Applications (2S/M) Three or More Axles (4S/2M) AL43064 AL AL AL AL /2 & 3/4 Nipple; 2V; 3/8 Ports Service Brake Priority /2 Nipple; 24V; 3/8 Ports Service Brake Priority /2 & 3/4 Nipple; 2V; 3/8 Ports Spring Brake Priority /2 & 3/4 Nipple; 2V; 3/8 Ports Spring Brake Priority (4-SB Port) /2 & 3/4 Nipple; 2V; 3/8 Ports Service Brake Priority (4-SB Port) Meritor WABCO Style Remanufactured ABS Truck Valves Part# Description Truck/Tractor/Bus Application X Remanufactured Rear Axle Valve Pack Tandem Drive Axle X Remanufactured Modulator Valve In Line Style - Screw-In X Remanufactured Modulator Valve In Line Style - Bayonet X Remanufactured Service Brake Relay Valve for Valve Pack Rear Axle ABS 34

39 Meritor WABCO Style Remanufactured Trailer/Dolly Valves LIKE-NU MERITOR WABCO ENHANCED EASY-STOP TM TRAILER ABS VALVES AND ECU S ABS Valve and ECU Included Trailer and Dollie Applications Built After 3/0 Haldex Control Delivery Supply Exhaust Part Number Description Port Port Port Port KX WABCO 2S/M Trailer ABS Assembly 3/8-8 3/8-8 3/4-4 Not Threaded K Cable Included 2 V; Standard Trailers Core Group: ABS X WABCO 2S/M Trailer ABS Assembly 3/8-8 3/8-8 3/4-4 Not Threaded 2V; Standard Trailers Core Group: ABS X WABCO 2S/2M Trailer ABS Assembly /4-8 3/8-8 3/4-4 Not Threaded Dual Modulator Valve 2 V; Standard Trailers Core Group: ABS X WABCO 2S/2M-4S/2M-4S/3M Trailer /4-8 3/8-8 3/4-4 Not Threaded ABS Assembly; Dual Modulator Valve 2 V; Multi-Configuration Core Group: ABS X WABCO 2S/M Trailer ABS Assembly 3/8-8 3/8-8 3/4-4 Not Threaded 2 V; Turntables, Steerables and Dollies Core Group: ABS X VALVE ONLY for X and /4-8 3/8-8 3/4-4 Not Threaded X assemblies X VALVE ONLY for KX, 3/8-8 3/8-8 3/4-4 Not Threaded X and X K WABCO Trailer ABS Modulator Valve Cable Connects M ECU to Relay Valve.5 Meter Length Right Angle Valve Connector.65 34a

40 Meritor WABCO Style Remanufactured ABS Truck/Tractor/Bus Valves Quick Release Valve For Valve Packs SPECIFICATIONS Application Front Axle ABS Valve Packs NOTES Each individual valve includes: (2) O-Rings, (4) Mounting Bolts and Grease Pack. Haldex Crack System Connector Core Part Number Description Pressure Config. Type Group X Quick Release Valve For Valve Pack psi All Steer Axle /2-4 NPTF ABS X Quick Release Valve For Valve Pack 3-4 psi All Steer Axle /2-4 NPTF ABS X Quick Release Valve For Valve Pack 6-8 psi All Steer Axle /2-4 NPTF ABS2 Meritor WABCO Style ATC Valve SPECIFICATIONS Voltage Application 2V Rear Axle ABS Valve Packs NOTES Compatible with D & E versions of Meritor WABCO Style ECUs Screw-In Bayonet Haldex Connector Core Part Number Description Type Group X Automatic Traction Control Valve For Valve Pack Screw-In ABS X Automatic Traction Control Valve For Valve Pack Bayonet ABS5 Meritor WABCO Style Converter Cables Haldex Part Number Description Length K Meritor WABCO Style Converter Cable Bayonet to Screw-In Converter K Meritor WABCO Style Converter Cable Screw-In to Bayonet Converter b

41 Trailer Roll Stability (TRS) Applications 4S/2M ABS with Roll Stability Support ECU and Dual Modulator Valve Serviced Separately Integral Lateral Accelerometer to monitor Roll Stability Integral Control Line Filter Made of EGC material for light weight, durability and environmental protection Works with standard ABS Wheel Speed Sensors Electronic Control Unit (ECU) AL Valve and AL99337 ECU Shown Part# Description Application AL TRS Info Center July 2005 to Present Production, 2V, American Standard Units for TRS AL TRS Dual Modulator Valve NPT Ports: Res /2 ; Control 3/8 ; Air Bag 3/8 ; 6-Delivery 3/8 AL99337 TRS ECU 2V with Three Auxiliary Ports AQ5853 TRS PC Diagnostic Kit 2V; CD; Interface Cabling (PC not included) AQ TRS Premium Retrofit Kit 2V, TRS Components for Retrofit of existing 4S/2M ABS Installations AQ TRS Service Kit Service Components for GEN ECU (AL99329) and PLC Power Adapter (AL9569) AQ TRS Replacement Kit Heil Special; TRS Components for Retrofit of existing 4S/2M ABS Installations PLC/Plus 9 Pin SLH-A7 ECU Multi-Axle (Non-Steer Axles) SLH-A8 ECU Single and Dolly Axles AL993 PLC ECU - SLH-A7-9 Pin - 2 Keys-Diagonal AL9932 PLC ECU - SLH-A8-9 Pin - 2 Keys-Across ECU Upgrade Kits Wheel speed sensor and Trailer power connects directly to ECU (no intermediate cables required) Single fastener design assures easy serviceability Potted ECU enclosure provides excellent protection from the environment AQ964 Shown AQ S/M A8 ECU Upgrade Kit; PLC Select ECU AQ9640 2S/M A7 ECU Upgrade Kit; PLC Select ECU AQ964 4S/2M ECU Upgrade Kit; 2M PLC Select ECU PLC Select M and 2M Wheel speed sensor and Trailer power connects directly to ECU (no intermediate cables required) Single fastener design assures easy serviceability Potted ECU enclosure provides excellent protection from the environment PLC Select M supports all 2S/M applications AL99336 PLC Select PLUS ECU - DIN 2V - SLH-A7 - Multi-Axle AL99338 PLC Select M ECU - DIN 2V - SLH-A7 - Multi-Axle (Non-Steer Axles) AL99339 PLC Select M ECU - DIN 2V - SLH-A8 - Dollies/Single Axle AL99340 PLC Select M ECU - DIN 2V - SLH-A7 - Multi-Axle (Non-Steer Axles) AL9934 PLC Select M ECU - DIN 2V - SLH-A8 - Dollies/Single Axle PLC Select 2M supports 4S/2M and 2S/2M applications AL99342 PLC Select 2M ECU - DIN 2V - SLH-A7 - Multi-Axle AQ99342 Shown AQ99338 Shown 35

42 Loom Assemblies ECU end has a 9 or 28-Pin connector that interfaces with matching connector on the ECU Trailer end includes 2 or 4 sensor leads and or 2 valve leads depending on the ABS configuration and a power lead with industry 5-pin male connector PRODUCTION from MARCH 200 to Present PLC 2S/M Loom AL40900 AL4090 AL S/M PLC - SLH-A7-9 Pin - 2 Keys-Diagonal 2S/M PLC - SLH-A8-9 Pin - 2 Keys-Across 4S/2M PLC - 9 Pin - No Keys PLC 4S/2M Loom Note: PLC Plus platform discontinued. Upgrade to new technology with the ECU upgrade kits. AQ9640 replaces AL40953 and AL AQ964 replaces AL95600, AL95604 and AL ABS Sensors, Kits, Blocks SENSORS WITH RETAINER CLIP Sensor - 90 Body - With Clip Length AL Feet (0.5m) AL Feet (.25m) AL Feet (.75m) AL Feet (.5m) AL Feet (2m) AL Feet (2.25m) AL Feet (2.5m) AL Feet (3m) AL Feet (3.5m) AL Feet (4m) SENSOR ACCESSORIES A Sensor Block Retainer A Tractor/Trailer ABS Retainer A Sensor Block (Trailer) UNIVERSAL SENSOR EXTENSIONS ECU end has 2-Pin female connector Sensor end has 2-Pin male connector Sensor - 90 Body - With Clip and Block Length AQ Feet (2m) Sensor - Straight Body - With Clip Length AL Feet (0.5m) AL Feet (2m) AL Feet (4m) NOTES:. Sensors supplied with A Retainer Clip. 2. Longer lengths may be used; secure excess to trailer. AL99800 AL9980 AL99802 AL99803 AL99804 AL99805 AL99806 AL99807 AL99808 AL99809 AL9980 AL998 Length.6 Feet (0.5m) 3.3 Feet (m) 4.9 Feet (.5m) 6.6 Feet (2m) 8.2 Feet (2.5m) 9.8 Feet (3m).5 Feet (3.5m) 3. Feet (4m) 6.4 Feet (5m) 9.7 Feet (6m) 26.2 Feet (8m) 32.8 Feet (0m) Haldex offers a complete line of ABS Power Cords, Extensions, Adapter Cables, Diagnostic Equipment and associated ABS Hardware. Please consult the Haldex Master Catalog ( for our complete listing. 36

43 Remanufactured Clutches - 3 LIPE PUSH TYPE CLUTCH - 3 SINGLE PLATE - FLAT FLYWHEEL REMAN COVER DISC DISC MAX BOLT PACK # ASSEMBLY ASSEMBLY TYPE SPLINE SIZE TORQUE CIRCLE APPLICATION RC9334X RC330933X DAMP ORGANIC.25-0T /4.625 NAVISTAR RC9337X RC330933X DAMP CERAMIC.25-0T /4.625 NAVISTAR RC93334X RC330933X DAMP ORGANIC.5-0T /4.625 PERKINS RC93536X RC330935X DAMP CERAMIC.5-0T mm/4.764 RENAULT RC93824X RC330938X DAMP ORGANIC.38-0T /4.625 FORD/DODGE RC93827X RC330938X DAMP CERAMIC.38-0T /4.625 FORD/DODGE RC93834X RC330938X DAMP ORGANIC.5-0T /4.625 CHEV/GMC RC93837X RC330938X DAMP CERAMIC.5-0T /4.625 CHEV/GMC RC207736X RC X DAMP CERAMIC.5-0T /4.625 CAT 36/326 ENG. LIPE PUSH TYPE CLUTCH - 3 TWO PLATE RECESS FLYWHEEL REMAN COVER DISC DISC INTER. SPLINE MAX BOLT PACK # ASSEMBLY ASSEMBLY TYPE PLATE SIZE TORQ. CIRCLE APPLICATION RC9334X RC33093X (FWS) DAMP ORG. C T /4.625 CUMMINS (PPS) RC9344X RC33093X (FWS) DAMP ORG. C T /4.625 CUMMINS (PPS) RC93734X RC330937X (FWS) DAMP ORG. C T /4.625 CHEV/GMC (PPS) CUMMINS RC98934X RC330989X (FWS) DAMP ORG. C T /4.625 NAVISTAR (PPS) FORD RC98938X RC330989X (FWS) DAMP CER. C T /4.625 NAVISTAR (PPS) FORD LIPE PUSH TYPE CLUTCH - 3 TWO PLATE RECESS FLYWHEEL REMAN COVER DISC DISC INTER. SPLINE MAX BOLT PACK # ASSEMBLY ASSEMBLY TYPE PLATE SIZE TORQ. CIRCLE APPLICATION RC94032X RC330940X RIGID ORG. C T - - FORD GAS RC94036X RC330940X (FWS) DAMP CER. C T - - FORD GAS (PPS) RC9434X RC33094X (FWS) DAMP ORG. C T CAT (PPS) NOTE: Replacement Disc Assemblies Available in New Only. 37

44 Remanufactured Clutches - 4 LIPE PUSH TYPE CLUTCH - 4 SINGLE PLATE - FLAT FLYWHEEL REMAN COVER DISC DISC MAX BOLT PACK # ASSEMBLY ASSEMBLY TYPE SPLINE SIZE TORQUE CIRCLE APPLICATION RC047604X RC4047X DAMP ORGANIC.5-0T CHEV/GMC/FORD RC086604X RC4086X DAMP ORGANIC.5-0T NAVISTAR RC686607X RC4686X DAMP CERAMIC.5-0T CHEV/GMC DIESEL RC RC4686X DAMP CERAMIC.5-0T CHEV/GMC GAS LIPE PUSH TYPE CLUTCH - 4 TWO PLATE RECESS FLYWHEEL REMAN COVER DISC DISC INTER. SPLINE MAX BOLT PACK # ASSEMBLY ASSEMBLY TYPE PLATE SIZE TORQ. CIRCLE APPLICATION RC072604X RC4072X (FWS) DAMP ORG. C T FORD (PPS) RC072607X RC4072X (FWS) DAMP CER. C T FORD (PPS) LIPE PUSH TYPE CLUTCH - 4 TWO PLATE RECESS FLYWHEEL REMAN COVER DISC DISC INTER. SPLINE MAX BOLT PACK # ASSEMBLY ASSEMBLY TYPE PLATE SIZE TORQ. CIRCLE APPLICATION RC067645X RC4067X (FWS) DAMP ORG. C T VARIOUS (PPS) CRANE RC067646X RC4067X (FWS) DAMP CER. C T VARIOUS (PPS) CRANE RC3604X RC43X (FWS) DAMP ORG. C T CHEV/GMC (PPS) RC3606X RC4067X (FWS) DAMP CER. C T CHEV/GMC (PPS) RC3649X RC43X (FWS) DAMP ORG. C T CATERPILLAR (PPS) NOTE: Replacement Disc Assemblies Available in New Only. Rigid Discs Not Recommended. 38

45 New/Remanufactured Clutches - 4 & 5 /2 4 TWO PLATE, POT FLYWHEEL SUGGESTED NEW PACK # REMAN PACK # DISC TYPE SPLINE SIZE WEIGHT APPLICATION HN RC390DCX DAMP CERAMIC 2-0T 03 LBS. VARIOUS HN RC390DOX DAMP ORGANIC 2-0T 05 LBS. VARIOUS 5 /2 TWO PLATE, FLAT FLYWHEEL SUGGESTED NEW PACK # REMAN PACK # DISC TYPE SPLINE SIZE WEIGHT APPLICATION HN08398 RC597DCX DAMP CERAMIC 2-0T 37 LBS. VARIOUS HN RC597DOX DAMP ORGANIC 2-0T 39 LBS. VARIOUS HN RC08EZX 0 SPRING CERAMIC 2-0T 43 LBS. CAT 3406B DDA 60 SERIES EARLY MACK HN RC698EZX 9 SPRING CERAMIC 2-0T 46 LBS. LATE MACK E6-E7 HN RC700EZX 7 SPRING CERAMIC 2-0T 42 LBS. CUMMINS N-4 Haldex offers a complete line of New and Remanufactured Clutches. Please consult the Haldex Master Catalog ( for a detailed listing of the clutch products offered. 39

46 Most Haldex Remanufactured Parts are also available in New and CoreFree. Please consult the Haldex Master Catalog ( for our complete listing. Remanufactured Alternators RA2000X/RA2200X RA228000X RA403000X REMANUFACTURED DELCO ALTERNATORS DELCO TYPE VOLTAGE AMPS POLARITY REMAN # RA2000X 2-SI 2 V 00 Negative RA2200X 22-SI 2 V 30 Negative REMANUFACTURED LEECE-NEVILLE ALTERNATORS LEECE-NEVILLE TYPE VOLTAGE AMPS POLARITY MFG # RA228000X JB Series 4 V 60 Pos./Neg. 2800JB REMANUFACTURED MOTOROLA ALTERNATORS MOTOROLA TYPE VOLTAGE AMPS POLARITY MFG # NOTES RA403000X & V 30 Insul. 8LHA2023V Pos./Neg. Ground Remanufactured Delco Starters PINION SWITCH DELCO TYPE VOLTAGE ROTATION TEETH POSITION REMAN # RS37000X 37-MT 2 V CW RS4000X 40-MT 2 V CW RS4200X 42-MT 2 V CW RS42002X 42-MT 2 V CW Remanufactured Fan Clutches REMANUFACTURED HORTON FAN CLUTCHES RS4000X RS4200X MODEL ENGINE RF790000X Clutch S Cummins NTC, NT, 444 RF790007X Clutch S Caterpillar 3406 RF79000X Clutch S Cummins L-0, NTC RF79000X Clutch HT/S Cummins NTC, NT88, N4 GOLD TOP FAN CLUTCH REBUILD KITS RF4200K 2 Pilot; 2 Pulley Bearings RF4256K 2.56 Pilot; 2 Pulley Bearings 40

47 Most Haldex Remanufactured Parts are also available in New and CoreFree. Please consult the Haldex Master Catalog ( for our complete listing. Remanufactured Lucas Girling Hydraulic Brake Calipers BENDIX 2.88 Twin Piston - Chev/GMC/Navistar CALIPER LOADED SEMI-LOADED CASTING SHIM HARDWARE ONLY KIT KIT NUMBER KIT KIT RH55250X RH55250LLX (left) RH55250SX SK225K RH5635K RH55250RLX (right) DAYTON 2.50 Twin Piston - Chev/GMC/Ford CALIPER LOADED SEMI-LOADED CASTING SHIM HARDWARE ONLY KIT KIT NUMBER KIT KIT RH5525X RH5525LX RH5525SX 472 SK224K RH5636K BENDIX 2.60 Twin Piston - Navistar CALIPER LOADED SEMI-LOADED CASTING SHIM HARDWARE ONLY KIT KIT NUMBER KIT KIT RH5534X RH5534LX RH5534SX SK225K RH5634K REMANUFACTURED IN THE USA 4

48 Most Haldex Remanufactured Parts are also available in New and CoreFree. Please consult the Haldex Master Catalog ( for our complete listing. Air Control Valves Air Wiper Motors Part # RM259800X Sprague Compatible Part # RM500 Trico Compatible Part # RM65000 Remanufactured Haldex/Competitive Master Cylinders and Vacuum Boosters Part # RM349500X Bendix Vacuum Booster Part # RV X Midland Master Cylinder Part # RV350002X All Makes Remanufactured Steering Gears & Pumps For Caterpillar, Cummins, Detroit Diesel, Ford, General Motors, Mack, Navistar and Thermo-King Engines. Haldex offers TRW, Saginaw, Hobourn/Eaton, Vickers and Parker Hannifin. 42

49 43

50 44

51 GM BRAKE BLOCK Friction Code FF Material Type 2040 Semi-Metallic Brake Type S Cam GAWR 25,000 lbs. GP BRAKE BLOCK Friction Code GG Material Type Organic Brake Type S Cam GAWR ,000 lbs. GC BRAKE BLOCK Friction Code FF/FF Material Type...GG/GZ Semi-Metallic/Organic Combo Brake Type S Cam GAWR ,000 lbs. GZ BRAKE BLOCK Friction Code FF Material Type Semi-Metallic Brake Type S Cam GAWR ,000 lbs. Grey-RockTM GG BRAKE BLOCK RSD SYSTEMS COMPLIANT Friction Code FF Material Type Organic Brake Type S Cam GAWR ,000 lbs. GR BRAKE BLOCK RSD SYSTEMS COMPLIANT Friction Code FF Material Type Organic Brake Type S Cam GAWR ,000 lbs. GD BRAKE BLOCK Friction Code FF Material Type Organic Brake Type S Cam GAWR ,000 lbs. GF BRAKE BLOCK Friction Code FF Material Type Organic Brake Type S Cam GAWR ,000 lbs. GN BRAKE BLOCK Friction Code FF Material Type Organic Brake Type S Cam GAWR ,000 lbs. Economy Grade Friction HV76 BRAKE BLOCK Friction Code FF Material Type.....HV76 Organic Brake Type.. S Cam Front Brake GAWR ,000 lbs. HV77 BRAKE BLOCK Friction Code FF Material Type..HV77 Organic Brake Type S Cam GAWR ,000 lbs. HV88 BRAKE BLOCK Friction Code FF Material Type..HV88 Organic Brake Type S Cam GAWR ,000 lbs. Consult the Haldex Master Catalog ( for a complete listing of Friction Products Offered. 45

52 (cont d) PART NUMBER FORMAT - Medium & Heavy Duty GG 455 Q R R = Reman Shoe G = Reman Gripper Kit - Boxed (2 Shoes and Hardware Kit) N = New Lined Shoe J = New Gripper Kit - Boxed (2 Shoes and Hardware Kit) Shoe Core Identifier FMSI NUMBER (Friction Materials Standard Institute, Inc.) Product Mix Designate (Brake Block Description) Brake Lining Descriptions AD, BD, CD, D, ED, Etc = Lining Drill Pattern (Varies With F.M.S.I. #) Bs = Lining In Bulk (Follows Drill Pattern) Xs = Single Oversized Lining (Follows Drill Pattern) XXs = Double Oversized Lining (Follows Drill Pattern) XXXs = Triple Oversized Lining (Follows Drill Pattern) slimited Availability Common Friction Words Anchor Refers to the anchor end of a piece of friction material. Cam Refers to the cam end of a piece of friction materials. Drill Pattern Dimensional data referring to holes in specific piece of friction material. The data will include the size, number and location of the holes for each FMSI #. FMSI Stands for Friction Material Standard Institute. FMSI # Number assigned to a specific dimension of block that may include the radius, thickness, width, length and drill hole specifications. 46

53 5 x 4 Standard Steer Axle Rivet hole spacing across width (Center to Center) 2 3/4 Hardware Kit Part # CQ6697 Eaton - Air/Single Web Brakes Width FMSI # Shoe I.D. Core Group E 308E Relined Relined-Gripper Kit New New-Gripper Kit Shoe With CQ6697 Lined Shoe With CQ6697 GC308ER GC308EG GC308EN GC308EJ - - GF308EN GF308EJ GG308ER GG308EG GG308EN GG308EJ GR308ER GR308EG GR308EN GR308EJ HV76308ER HV76308EG HV76308EN 5 x 4 Extended Service Steer Axle Rivet hole spacing across width (Center to Center) 2 Hardware Kit Part # CQ6697 Width FMSI # Shoe I.D. Core Group E 443TD Relined Relined-Gripper Kit New New-Gripper Kit Shoe With CQ6697 Lined Shoe With CQ6697 GC443ER GC443EG GF443EN GF443EJ GG443ER GG443EG GG443EN GG443EJ GR443ER GR443EG GR443EN GR443EJ HV76443ER HV76443EG HV76443EN - 6 /2 x 7 Low Mount Hardware Kit Part # CQ6739 Width FMSI # Shoe I.D. Core Group 7 43 E 43NS Relined Relined-Gripper Kit New New-Gripper Kit Shoe With CQ6739 Lined Shoe With CQ6739 GC43ER GC43EG GC43EN GC43EJ GD43ER GD43EG GD43EN GD43EJ GF43ER GF43EG GF43EN GF43EJ GG43ER GG43EG GG43EN GG43EJ GM43ER GM43EG - - GN43ER GN43EG GN43EN GN43EJ GP43ER - GP43EN - GR43ER GR43EG GR43EN GR43EJ GZ43ER GZ43EG GZ43EN - Consult the Haldex Master Catalog ( for a complete listing of Friction Products Offered. 47

54 Eaton - Air/Double Web and Cast Brakes 6 /2 x 7 Eaton ES Uses extended wear lining, cam and hardware Retainer springs attach to tabs on table anchor end Single Anchor Pin Hardware Kit Part # CQ6548 Hardware Kit Part # CQ65444 available for steer axle Width FMSI # Shoe I.D. Core Group ES 4709 Relined Relined-Gripper Kit New New-Gripper Kit Shoe With CQ6548 Lined Shoe With CQ6548 GC4709ESR GC4709ESG GC4709ESN GC4709ESJ GD4709ESR GD4709ESG GD4709ESN GD4709ESJ GF4709ESR GF4709ESG GF4709ESN GF4709ESJ GG4709ESR GG4709ESG GG4709ESN GG4709ESJ GN4709ESR GN4709ESG GN4709ESN GN4709ESJ GP4709ESR GP4709ESG - - GR4709ESR GR4709ESG GR4709ESN GR4709ESJ GZ4709ESR GZ4709ESG /2 x 7 Eaton ESII Uses extended wear lining, cam and hardware Retainer springs attach on web Single Anchor Pin Hardware Kit Part # CQ65477 Hardware Kit Part # CQ65445 available for steer axle Width FMSI # Shoe I.D. Core Group ES2 4709NS Relined Relined-Gripper Kit New New-Gripper Kit Shoe With CQ65477 Lined Shoe With CQ65477 GC4709ES2R GC4709ES2G GC4709ES2N GC4709ES2J GD4709ES2R GD4709ES2G GD4709ES2N GD4709ES2J GF4709ES2R GF4709ES2G GF4709ES2N GF4709ES2J GG4709ES2R GG4709ES2G GG4709ES2N GG4709ES2J GN4709ES2R GN4709ES2G GN4709ES2N GN4709ES2J GP4709ES2R GP4709ES2G - - GR4709ES2R GR4709ES2G GR4709ES2N GR4709ES2J GZ4709ES2R GZ4709ES2G GZ4709ES2N GZ4709ES2J Consult the Haldex Master Catalog ( for a complete listing of Friction Products Offered. 48

55 Meritor - Air/Single Web Brakes 5 x 4 Meritor Q Late Style Late Style Shoe Table Located Toward Anchor End Hardware Kit Part # CQ6900 or # CQ67899 minor kit Width FMSI # Shoe I.D. Core Group Q2 308TQN Relined Relined-Gripper Kit New New-Gripper Kit Shoe With CQ6900 Lined Shoe With CQ6900 GC308Q2R GC308Q2G GC308Q2N GC308Q2J - - GF308Q2N GF308Q2J GG308Q2R GG308Q2G GG308Q2N GG308Q2J GR308Q2R GR308Q2G GR308Q2N GR308Q2J HV76308Q2R HV76308Q2G HV76308Q2N - 5 x 4 Meritor Q Plus Double Web Hardware Kit Part # CQ65642 Width FMSI # Shoe I.D. Core Group Q 4702 Relined Relined-Gripper Kit New New-Gripper Kit Shoe With CQ65642 Lined Shoe With CQ65642 GC4702QR GC4702QG GC4702QN GF4702QN GF4702QJ GG4702QR GG4702QG GG4702QN GG4702QJ GR4702QR GR4702QG GR4702QN GR4702QJ 6 /2 x 7 Meritor Q Width FMSI # Shoe I.D. Core Group Q 455TQN Relined Relined-Gripper Kit New New-Gripper Kit Shoe With CQ66867 Lined Shoe With CQ66867 GC455QR GC455QG GC455QN GC455QJ GD455QR GD455QG GD455QN GD455QJ GF455QR GF455QG GF455QN GF455QJ GG455QR GG455QG GG455QN GG455QJ GM455QR GM455QG GM455QN GN455QR GN455QG GN455QN GN455QJ GP455QR GP455QG GP455QN GP455QJ GR455QR GR455QG GR455QN GR455QJ GZ455QR GZ455QG GZ455QN GZ455QJ 49

56 Meritor - Air/Double Web and Cast Brakes 6 /2 x 7 Meritor Q Plus Current Design Shoe has no hump in web and inside rivet spacing across width of 2.75 Hardware Kit Part # CQ66867 Width FMSI # Shoe I.D. Core Group Q 4707 Relined Relined-Gripper Kit New New-Gripper Kit Shoe With CQ66867 Lined Shoe With CQ66867 GC4707QR GC4707QG GC4707QN GC4707QJ GD4707QR GD4707QG GD4707QN GD4707QJ GF4707QR GF4707QG GF4707QN GF4707QJ GG4707QR GG4707QG GG4707QN GG4707QJ GM4707QR GM4707QG - - GN4707QR GN4707QG GN4707QN GN4707QJ GP4707QR GP4707QG GP4707QN GP4707QJ GR4707QR GR4707QG GR4707QN GGR4707QJ GZ4707QR GZ4707QG GZ4707QN GZ4707QJ Haldex offers a complete line of Brake Shoes. Please consult the Haldex Master Catalog ( for a detailed listing of the friction products offered. 50

57 Brake Hardware Kits 2 /4 TRAILER KITS CQ67395 CQ67397 CQ67398 CQ67405 CQ67437 CQ67503 CQ65620 CQ69002 CQ69006 Meritor - Q Series Brakes Standard Forge - Cast Shoes and Weld on Spider Fabricated Shoes and Weld on Spider Dana - FT New Style Fabricated, /2 Diameter Roller and Weld on Spider Dana Spicer - FC 996 and newer /2 Roller and /4 Anchor Pin Converts Standard Forge - Cast to Fabricated Shoes Dexter - PQ Style May 996 and newer Dana Spicer - New Style U-Brake /4 Diameter Roller Dana Spicer - New Style U-Brake /2 Diameter Roller CQ STEER AXLE KITS CQ6559 CQ65642 CQ6697 CQ6699 CQ6900 CQ69007 CQ69008 CQ69947 CQ69948 Bendix - Ford Cargo Series Front Axle Brake Meritor - Q-Plus Series Brakes Eaton - ES Series Single Anchor Pin Front Axle Brakes Meritor - T-Series Front Axle Brakes Meritor - Q Series Front Axle Brakes - Single Web Spicer - Front Axle Brake - Double Web 5 x 6 /2 Dana/Spicer Heavy Axle Eaton - ES Reduced Envelope Series 5 x 6 Front Axle Brake Eaton - ES Reduced Envelope Series 5 x 8 5/8 CQ6900 Consult the Haldex Master Catalog ( for a complete listing of Friction Products Offered. 5

58 6 /2 BRAKE HARDWARE KITS Brake Hardware Kits (cont d) CQ65444* Eaton - ES Combination Kit CQ65445* Eaton - ESII Combination Kit CQ65477 CQ65479 CQ6548 CQ65520 CQ66867 CQ66887 CQ6694 CQ6739 CQ67390 CQ69005 Eaton - ESII 2nd Generation Eaton - ES for Meritor Eaton - ES st Generation Bendix - Ford Cargo Series Meritor - Q & Q Plus Heavy Duty Meritor - Q, Q Plus Relocated Return Spring Shoes & Q Plus Cam Shafts, Front Axle Brake Fruehauf - XEM & FQ Heavy Duty Eaton - Single Anchor Pin Heavy Duty Meritor - P Series Captive Anchor Pin Meritor - Q FL Series Front Axle CQ66867 * Combination Kit contains return springs for horse collar bracket application. Consult the Haldex Master Catalog ( for a complete listing of Friction Products Offered. 52

59 Performance Profile Developed for excellent braking performance and extended service life in all transit and coach applications Organic fiber based formulation provides outstanding thermal stability and enhanced drum life Quiet operation ensures passengers of a safe trouble-free ride High Performance APTA Certified 26,000 lb. Brake Lining For Transit and Coach Applications Available in both New and Remanufactured Shoes Minimal growth and swell makes TransitmaX an excellent choice to be combined with automatic brake adjusters and ABS systems Standard and Oversize Linings available Brake: 6 /2 x 8 5/8 Axle Load: 26,000 lbs. Rolling Radius: 8.3 AL Factor: 95 Quality & Certifications Brake: 4 /2 x 0 Axle Load: 26,000 lbs. Rolling Radius: 20.3 AL Factor: 20 Friction Average: Normal 0.43 Hot 0.4 Coefficient - FF FMVSS-2 certified at 26K axle rating APTA / AMECA certified Manufactured in ISO/TS6949 certified facilities Decades of experience supplying friction for heavy and severe duty vehicles 53

60 54 (cont d)

61 (cont d) TRANSIT BLOCK TM Friction Code FF Material Type Organic Brake Type S Cam GAWR ,000 lbs. Certification APTA / AMECA Approved PART NUMBER FORMAT - Transit TM L B G XX Standard Thickness X = st Oversize XX = 2nd Oversize XXX = 3rd Oversize G = Reman Gripper Kit - Boxed (2 Shoes and Hardware Kit) J = New Gripper Kit - Boxed (2 Shoes and Hardware Kit) K = Reman Shoes - Boxed (2 Per) P = New Lined Shoes - Boxed (2 Per) R = Reman Shoe N = New Lined Shoe Bolt Information _ = Steel Bolts B = Brass Bolts Bushing Information (*) _ = Bushings Not Replaced L = Bushing(s) And Labor Bushing Type 686 = OE Reference FMSI NUMBER (Friction Materials Standard Institute, Inc.) TM = TransitmaX (*) Haldex strongly recommends all REMAN Shoe Bushings be replaced. Fasteners Part No. BA38600B BA38600Z BA38625B BA38625Z BA38650Z Description 3/8 x Brass Bolt Assembly 3/8 x Zinc Bolt Assembly 3/8 x /4 Brass Bolt Assembly 3/8 x /4 Zinc Bolt Assembly 3/8 x /2 Zinc Bolt Assembly 55

62 (cont d) MERITOR W SERIES CAM BRAKE Front Axle Brake 4 /2 x 6 OE Number A M-57 Core Group 4228 Pc Bushing Lining Part No. TM4228FD TM4228FDX TM4228FDXX TM4228FDXXX Description Standard Thickness First Oversize Double Oversize Triple Oversize Popular Lined Shoe Numbers Haldex Part No. New Bushing Fastener Type Shoe Type Configuration Hardware Included Lining Thickness TM422857BJ YES BRASS BOLT NEW BOXED (2 PER) YES STANDARD TM422857BP YES BRASS BOLT NEW BOXED (2 PER) NO STANDARD TM422857LBG YES BRASS BOLT REMAN BOXED (2 PER) YES STANDARD TM422857LBK YES BRASS BOLT REMAN BOXED (2 PER) NO STANDARD BRAKE HARDWARE KIT Part No. CQ690 56

63 (cont d) MERITOR W SERIES CAM BRAKE Rear Axle Brake 4 /2 x 0 OE Number A-3722-J-686 Core Group 4592SB 2 Pc Bushing Lining Part No. TM4592AD TM4592ADX TM4592ADXX TM4592ADXXX Description Standard Thickness First Oversize Double Oversize Triple Oversize Popular Lined Shoe Numbers Haldex Part No. New Bushing Fastener Type Shoe Type Configuration Hardware Included Lining Thickness TM BJ YES BRASS BOLT NEW BOXED (2 PER) YES STANDARD TM BP YES BRASS BOLT NEW BOXED (2 PER) NO STANDARD TM LBG YES BRASS BOLT REMAN BOXED (2 PER) YES STANDARD TM LBK YES BRASS BOLT REMAN BOXED (2 PER) NO STANDARD BRAKE HARDWARE KIT Part No. CQ

64 (cont d) MERITOR W SERIES CAM BRAKE Rear Axle Brake 4 /2 x 0 OE Number A-3722-R-824 Core Group 4592BB Pc Bushing Lining Part No. TM4592AD TM4592ADX TM4592ADXX TM4592ADXXX Description Standard Thickness First Oversize Double Oversize Triple Oversize Popular Lined Shoe Numbers Haldex Part No. New Bushing Fastener Type Shoe Type Configuration Hardware Included TM BJ YES BRASS BOLT NEW BOXED (2 PER) YES STANDARD TM BP YES BRASS BOLT NEW BOXED (2 PER) NO STANDARD TM LBG YES BRASS BOLT REMAN BOXED (2 PER) YES STANDARD TM LBK YES BRASS BOLT REMAN BOXED (2 PER) NO STANDARD BRAKE HARDWARE KIT Part No. CQ

65 (cont d) MAN CAST BRAKE 4656 Cast Front Axle Brake 6.4 x 6.3 OE Number Core Group 4656 Pc Bushing Lining Part No. TM4656D TM4656DX TM4656DXX TM4656DXXX Description Standard Thickness First Oversize Double Oversize Triple Oversize Popular Lined Shoe Numbers Haldex Part No. New Bushing Fastener Type Shoe Type Configuration Hardware Included Lining Thickness TM4656TCJ YES RIVET NEW BOXED (2 PER) YES STANDARD TM4656TCLG YES RIVET REMAN BOXED (2 PER) YES STANDARD TM4656TCLK YES RIVET REMAN BOXED (2 PER) NO STANDARD TM4656TCP YES RIVET NEW BOXED (2 PER) NO STANDARD BRAKE HARDWARE KIT Part No. CQ

66 (cont d) MAN CAST BRAKE 4657 Cast Rear Axle Brake 6.4 x 8.66 OE Number Core Group 4657 Pc Bushing Lining Part No. TM4657D TM4657DX TM4657DXX TM4657DXXX Description Standard Thickness First Oversize Double Oversize Triple Oversize Popular Lined Shoe Numbers Haldex Part No. New Bushing Fastener Type Shoe Type Configuration Hardware Lining Included Thickness TM4657TCJ YES RIVET NEW BOXED (2 PER) YES STANDARD TM4657TCLG YES RIVET REMAN BOXED (2 PER) YES STANDARD TM4657TCLK YES RIVET REMAN BOXED (2 PER) NO STANDARD TM4657TCP YES RIVET NEW BOXED (2 PER) NO STANDARD BRAKE HARDWARE KIT Part No. CQ

67 (cont d) MERITOR CAST PLUS BRAKE 475 Cast Front Axle Brake 6 /2 x 6 OE Number A-3222-H-2296 Core Group 475CAST 2 Pc Bushing Lining Part No. TM457AD TM457ADX TM457ADXX TM457ADXXX Description Standard Thickness First Oversize Double Oversize Triple Oversize Popular Lined Shoe Numbers Haldex Part No. New Bushing Fastener Type Shoe Type Configuration Hardware Included Lining Thickness TM475TCJ YES RIVET NEW BOXED (2 PER) YES STANDARD TM475TCLG YES RIVET REMAN BOXED (2 PER) YES STANDARD TM475TCLK YES RIVET REMAN BOXED (2 PER) NO STANDARD TM475TCP YES RIVET NEW BOXED (2 PER) NO STANDARD BRAKE HARDWARE KIT Part No. CQ

68 (cont d) MERITOR CAST PLUS BRAKE 4728 Cast Rear Axle Brake 6 /2 x 8 5/8 OE Number A-3222-F-2294 Core Group 4728CAST 2 Pc Bushing Lining Part No. TM4528AD TM4528ADX TM4528ADXX TM4528ADXXX Description Standard Thickness First Oversize Double Oversize Triple Oversize Popular Lined Shoe Numbers Haldex Part No. New Bushing Fastener Type Shoe Type Configuration Hardware Included TM4728TCJ YES RIVET NEW BOXED (2 PER) YES STANDARD TM4728TCLG YES RIVET REMAN BOXED (2 PER) YES STANDARD TM4728TCLK YES RIVET REMAN BOXED (2 PER) NO STANDARD TM4728TCP YES RIVET NEW BOXED (2 PER) NO STANDARD BRAKE HARDWARE KIT Part No. CQ

69 Notes: 63

70 Notes: 64

71 65

72 66

73 67

74 68