CROSS IMPLEMENT, INC. 6/8/2015 9:37
|
|
- Stewart Leon Carr
- 5 years ago
- Views:
Transcription
1 Internal Use -. Page 1 of 11 Work Order: Job Code: Warranty - PIP15HX470 Created: 3/27/ HX470 - S-SERIES VERTICAL UNLOADING AUGER 15HX470 - S-SERIES VERTICAL UNLOADING AUGER 15HX470 - S-SERIES VERTICAL UNLOADING AUGER 06/02/2015 from 15:48 to 16:00 JASON SHORT 0.20 $ /06/2015 from 11:25 to 12:00 JASON SHORT 0.58 $52.50 Total SHOP LABOR 0.78 $70.50 MPH13348 Conveyor Kit $ $ Total $ SERVICE ACCESSORIES $18.89 Total $18.89 Job Code PIP15HX470 Total $963.39
2 Internal Use -. Page 2 of 11 Work Order: Job Code: Internal - /GEN-INT COMBINE Created: 3/27/ COMPLETE COMBINE INSPECTION COMPLETE COMBINE INSPECTION COMPLETE COMBINE INSPECTION 06/01/2015 from 11:38 to 12:10 JASON SHORT 0.53 $ /01/2015 from 12:31 to 17:03 JASON SHORT 4.53 $ /02/2015 from 06:40 to 08:17 JASON SHORT 1.62 $ /02/2015 from 08:32 to 09:32 JASON SHORT 1.00 $72.00 Total SHOP LABOR 7.68 $ SERVICE ACCESSORIES $11.06 Total $11.06 Job Code /GEN-INT COMBINE Total $564.26
3 Internal Use -. Page 3 of 11 Work Order: Job Code: Internal - /GEN-AUTH REPAIRS Created: 3/27/ AUTHORIZED REPAIRS AUTHORIZED REPAIRS AUTHORIZED REPAIRS 06/02/2015 from 09:32 to 10:25 JASON SHORT 0.88 $ /02/2015 from 11:50 to 11:58 JASON SHORT 0.13 $ /03/2015 from 06:54 to 07:02 JASON SHORT 0.13 $ /03/2015 from 08:43 to 09:32 JASON SHORT 0.82 $ /03/2015 from 14:32 to 17:02 JASON SHORT 2.50 $ /04/2015 from 07:07 to 12:01 JASON SHORT 4.90 $ /04/2015 from 12:33 to 17:01 JASON SHORT 4.47 $ /05/2015 from 08:02 to 09:53 JASON SHORT 1.85 $ /05/2015 from 14:44 to 17:02 JASON SHORT 2.30 $ JASON SHORT Total SHOP LABOR $1, TY6341 GREASE $3.41 $3.41 HXE16363 Label $15.73 $15.73 HXE11090 Filter Element $ $ L FILTER $12.24 $12.24 RE AIR FILTER $46.31 $46.31 AH HYDRAULIC $46.71 $ TY26408 GREASE $17.51 $87.55 H PIVOT $2.22 $4.44 AXE16948 BULB $9.06 $9.06 H V-Belt $18.91 $ H1720 BUSHING $5.15 $5.15 TY26575 COOL-GARD TM $11.92 $11.92 H Mat $28.12 $28.12 H MAT $21.21 $21.21 H MAT $11.67 $11.67 H V-BELT $ $ RE FILTER ELE $17.23 $ WHITE MARKER $5.82 $5.82 H SEAL $16.81 $16.81 H PIVOT $2.22 $ FREIGHT/PART DELIVER $10.80 $10.80
4 Internal Use -. Page 4 of 11 Work Order: Job Code: Internal - /GEN-AUTH REPAIRS Created: 3/27/ AUTHORIZED REPAIRS AXE16947 FLOODLAMP $46.42 $46.42 TY26352 ALLPURPOSE $3.88 $3.88 H MAT $11.67 $11.67 TY26353 OIL $3.71 $3.71 TY26776 TOWEL $9.96 $9.96 Total $1, SERVICE ACCESSORIES $45.99 Total $45.99 Job Code /GEN-AUTH REPAIRS Total $2,345.38
5 Internal Use -. Page 5 of 11 Work Order: Job Code: Internal - /POWERGARD Created: 3/27/2015 VERIFY EQUIPMENT HAS BEEN SERVICEDPULL POWERGARD SAMPLES* VERIFY EQUIPMENT HAS BEEN SERVICED PULL POWERGARD SAMPLES *** MAKE SURE YOU PUT CERTIFIED STICKERS IN WINDOW!! pulled power guard samples after fluid and filter service 06/05/2015 from 14:10 to 14:43 JASON SHORT 0.55 $39.60 Total SHOP LABOR 0.55 $39.60 SERVICE ACCESSORIES $3.00 Total $3.00 Job Code /POWERGARD Total $42.60
6 Internal Use -. Page 6 of 11 Work Order: CHECK OVER FOR ANY ROCK DAMAGE Job Code: Internal - /ROCK DAMAGE Created: 3/27/2015 CHECK FOR ROCK DAMAGE: CLEAN OUT ROCK TRAP AND EMPTY SUMP no rock damage found during combine inspection 06/05/2015 from 14:08 to 14:09 JASON SHORT 0.02 $1.20 Total SHOP LABOR 0.02 $1.20 SERVICE ACCESSORIES $3.00 Total $3.00 Job Code /ROCK DAMAGE Total $4.20
7 Internal Use -. Page 7 of 11 Work Order: Job Code: Warranty - PIP15HX466A Created: 4/22/ HX466A - CLEANING FAN/SHOE DRIVE BELT REPLACEMENT 15HX466A - CLEANING FAN/SHOE DRIVE BELT REPLACEMENT 15HX466A - CLEANING FAN/SHOE DRIVE BELT REPLACEMENT removed shoe auger drive belt and replaced with pip belt 06/03/2015 from 14:03 to 14:31 JASON SHORT 0.47 $42.00 Total SHOP LABOR 0.47 $42.00 MPH20010 PIP BELT KIT $ $ Total $ SERVICE ACCESSORIES $4.41 Total $4.41 Job Code PIP15HX466A Total $224.66
8 Internal Use -. Page 8 of 11 Work Order: Job Code: Warranty - PIP15HX467C Created: 5/1/ HX467C - S-SERIES CAB NOISE 15HX467C - S-SERIES CAB NOISE 15HX467C - S-SERIES CAB NOISE installed cab noise pip 06/02/2015 from 10:25 to 11:50 JASON SHORT 1.42 $ /02/2015 from 12:35 to 15:47 JASON SHORT 3.20 $ Total SHOP LABOR 4.62 $ MPH13343 Cab Kit $ $ Total $ SERVICE ACCESSORIES $25.95 Total $25.95 Job Code PIP15HX467C Total $1,323.50
9 Internal Use -. Page 9 of 11 Work Order: Job Code: Internal - /SEP17 Created: 6/2/ REPAIR CLEANING FAN, ADJUST SPEED REPAIR CLEANING FAN, ADJUST SPEED REPAIR CLEANING FAN, ADJUST SPEED removed and replaced both cleaning fan bearings 06/05/2015 from 06:41 to 08:02 JASON SHORT 1.35 $ /05/2015 from 09:53 to 10:43 JASON SHORT 0.83 $60.00 Total SHOP LABOR 2.18 $ AH BALL BEARI $35.82 $35.82 AH BEARING $24.24 $24.24 AL14674 ECCENTRIC $8.87 $8.87 AXE29101 Pressed Flanged Housing $7.95 $7.95 N52258 PRESSED FL $2.08 $2.08 H PRESSED FL $6.24 $6.24 H PRESSED FL $7.54 $7.54 Total $92.74 SERVICE ACCESSORIES $5.00 Total $5.00 Job Code /SEP17 Total $254.94
10 Internal Use -. Page 10 of 11 Work Order: Job Code: Internal - /SEP34 Created: 6/2/2015 ADJUST/REPAIR SHOE AUGER DRIVE GEARS/BEARINGS ADJUST/REPAIR SHOE AUGER DRIVE GEARS/BEARINGS ADJUST/REPAIR SHOE AUGER DRIVE GEARS/BEARINGS removed all four shoe augers, removed spring pin, bevel gear and bearing from each and replaced bearings, eccentrics, spring pins and reinstalled bevel gears on each. reinstalled all four shoe augers and checked for appropriate back lash, and bevel gear meshing. 06/03/2015 from 09:32 to 11:17 JASON SHORT 1.75 $ /03/2015 from 12:38 to 14:02 JASON SHORT 1.40 $ Total SHOP LABOR 3.15 $ JD8554 ECCENTRIC $1.80 $7.20 E63018 SPRING PIN $1.43 $5.72 AH BALL BEARI $12.50 $50.00 Total $62.92 SERVICE ACCESSORIES $5.79 Total $5.79 Job Code /SEP34 Total $295.51
11 Internal Use -. Page 11 of 11 Work Order: Job Code: Internal - /LOAD4 Created: 6/2/ REPAIR CROSS AUGER REPAIR CROSS AUGER REPAIR CROSS AUGER removed and replaced front grain tank cross auger bearings 06/05/2015 from 10:44 to 12:00 JASON SHORT 1.27 $ /05/2015 from 12:45 to 14:08 JASON SHORT 1.38 $99.60 Total SHOP LABOR 2.65 $ JD39104 BALL BEARI $26.47 $52.94 AH ECCENTRIC $8.36 $16.72 H PRESSED FL $3.15 $6.30 Total $75.96 SERVICE ACCESSORIES $5.34 Total $5.34 Job Code /LOAD4 Total $ Repair Order # Total $6, SALES TAX IS NOT CALCULATED NOR INCLUDED. INVOICED WORK ORDERS DO NOT INCLUDE MISCELLANEOUS ITEMS Version
SERVICE INVOICE * * * DOCUMENT COPY * * * Internal Used Stock No Internal Used Stock No Invoice Number: Invoice Date:
Invoice To o.: Internal Used Stock o. 7818 Internal Used Stock o. 7818 * * * DOCUMET COPY * * * SERVICE IVOICE Invoice umber: 322980 1/17/201 Repair Order umber: Make/Model: H DEERE 9660STS COMBIE Serial
More informationCOMBINES 6620, 7720, 8820
COMBINES 6620, 7720, 6620 Engine Drive 1 1 H79236 Alternator and water pump (6466DH-01 and 6466TH-01) 2 1 ( -600000) R71603 Compressor, air conditioner 1 (600001- ) H113565 Compressor, air conditioner
More informationMain Frame (1,676 MM (5-1/2 FT.) Hay Pickup)
Main Frame (,676 MM (5-/2 FT.) Hay Pickup) 2 E34250 STRIPPER 2-3000 AUGER E66297 ANGLE 2 300- AUGER, (SUB FOR E34496) (SUB E9572) E9572 ANGLE 2 AUGER E6905 TUBE 59400-86 Pickup Heads Strippers (,676 MM
More informationJohn Deere. MODEL: 4400 Combine JD-O-OMH86804
John Deere MODEL: 4400 Combine THIS IS A MANUAL PRODUCED BY JENSALES INC. WITHOUT THE AUTHORIZATION OF JOHN DEERE OR IT'S SUCCESSORS. JOHN DEERE AND IT'S SUCCESSORS ARE NOT RESPONSIBLE FOR THE QUALITY
More informationLower Adjuster Small Black Header Sensor Reversed
Parts List for Combine Quantity by Model Early Late Early Late Note: Indented items indicate parts included M M M M M M in an assembly listed above F F F F F F 7 7 8 8 8 8 5 6 5 5 6 6 Part Name/Description
More informationCP3850 Series Grinders
1/11 1 Spring cylindrical 6156811670 1 1 1 1 1 X 2 Warning label 6158713860 1 1 1 1 1 X 3 CP plate 2050553403 1 1 1 1 1 X 4 Name plate 2050553413 1 1 1 1 1 X 5 Ring screw 6156731760 1 1 1 1 1 X 6 Autobalancer
More informationFeed Rolls 3940 and 3960 PTFH Upper Feed Rolls
Feed Rolls Upper Feed Rolls 12 3940 and 3960 PTFH 3940 and 3960 PTFH Feed Rolls 46 KEY PART NO. PART NAME QTY. SERIAL NO. 00 REMARKS 1 E52437 BUSHING 1 XX 2 34H353 SPRING PIN 1 X X 3/8" X 1-3/4" 3 24H1480
More informationRepair Parts Parts List for RIDGID 10 Compound Miter Saw Model No. MS1065LZ RIDGID parts are available on-line at
0. Repair Parts Model No. MS0LZ 0 0 0 0 0 FIGURE A. 0. 0 0 0 0. 0 0 WARNING: The assembly shown represents an important part of the Double Insulated System. To avoid the possibility of alteration or damage
More informationAllCropHarvester.com. New/New Old Stock List as of 03/04/2016
AllCropHarvester.com New/New Old Stock List as of 03/04/2016 If your part is not listed, please contact us. We may be able to get it, and/or have it as a used part. Contact us for prices not listed/used.
More informationSnow Blower Assembly Standard Flow Starting Serial Number to Current High Flow Starting Serial Number to Current
Snow Blower Assembly - 01-1500 Standard Flow Starting Serial Number 06337 to Current High Flow Starting Serial Number 11136 to Current Snow Blower Decal list Label Letter Description QTY. A Warning Do
More informationSUPER 47A CLEANER PARTS SET UP WITH BRUSH SCREEN CLEANING GROUP DRAWING NUMBER
SUPER 47A CLEANER PARTS SET UP WITH BRUSH SCREEN CLEANING PAGE GROUP DRAWING NUMBER.1 Thru 6.. 7.....8..9.10.....11.12.13 Thru 14.....15A.16 Thru 23..24.25 Thru 29..30A.31 Thru 32...33 Brush Adjusting
More informationSUPER 47D CLEANER PARTS SET UP WITH BRUSH SCREEN CLEANING GROUP DRAWING NUMBER
SUPER 47D CLEANER PARTS SET UP WITH BRUSH SCREEN CLEANING PAGE GROUP DRAWING NUMBER..1...2...3..4....5 & 6..7.....8..9.10.....11.12.13 Thru 14.....15A.16 Thru 23..24..25..26.27 Thru 29...30A.31 Thru 32...33
More informationCP3850 Series Grinders
1/11 1 Spring cylindrical 6156811670 1 1 1 1 1 1 1 X 2 Warning label 6158713860 1 1 1 1 1 1 1 X 3 CP plate 2050553403 1 1 1 1 1 1 1 X 4 Name plate 2050553413 1 1 1 1 1 1 1 X 5 Ring screw 6156731760 1 1
More informationAutomated Lubrication System
Automated Lubrication System Installation/Operation Manual Case IH Combine Models 2344, 2366, 2377 and 2388 Revised 08-09-06 1 System Overview Thank you for purchasing the Quicklub On Board Grease System
More informationWIDE-CORRUGATION FARM GRAIN BINS
SM WIDE-CORRUGATION FARM GRAIN BINS B R O C K G R A I N B I N S B rock Grain Systems has a world-wide reputation for providing reliable on-farm storage that allows farmers to market their grain when they
More informationPFadvantage JD 3300/4400/6600/7700; 4420
Ag Leader Technology Combine Installation JD 33//66/77; 2 Note: Indented items indicate parts included Quantity by Model in an assembly listed above Early Late Part Name/Description Part Number 3 3 6 6
More informationTwo-Stage Snow Blower For 4WD Pick Up Trucks. Operator s Manual
Two-Stage Snow Blower For 4WD Pick Up Trucks Operator s Manual Distrubuted by: Metal Fabricating LLC P.O. Box 831 Brodheadsville, PA 18322 Phone: 570-992-9989 SnowVac.com WARRANTY POLICY Metal Fabricating
More informationAg Leader Technology. Parts List for Combine MF , 8780, White 9700
Parts List for Combine Quantity by Model Note: Indented items indicate parts included W in an assembly listed above 8 8 8 8 H 5 5 5 7 I 6 7 9 8 T Part Name/Description Part No. 0 0 0 0 E Instruction Kit
More informationS-Series Combine and Front End Equipment Optimization
S-Series Combine and Front End Equipment Optimization Ready To Harvest for Wheat John Deere Harvester Works Contents Preface.2 Combine/FEE Bundle Recommendations. 3/4 Draper Inspection and adjustments.
More informationInstruction Kit Gleaner K2, K3, F2, F Flow Sensor K2-F
Parts List for Combine NOTE: Indented items indicate parts included In an assembly listed above. Quantity by Model Part Name/Description Part No. K2 F2 Instruction Kit 2005300-1 1 1 Flow Sensor K2-F2 2000292
More informationSERVICE I IPL, CTH 180, , CTH 180. Spare parts Ersatzteile Pièces détachées Reserve onderdelen Repuestos Reservdelar
SERVICE 7 I9900007 IPL, CTH 180, 1999-01, 106 25 67-61 CTH 180 Spare parts Ersatzteile Pièces détachées Reserve onderdelen Repuestos Reservdelar CTH 180 Engine Assembly 18 HP VANGUARD CTH 180 Engine Assembly
More informationINSTALLATION INSTRUCTION 88092
INSTALLATION INSTRUCTION 88092 FOR RANCHO SUSPENSION SYSTEM RS6592: NISSAN XTERRA & 2WD FRONTIER READ ALL INSTRUCTIONS THOROUGHLY FROM START TO FINISH BEFORE BEGINNING INSTALLATION Rev C IMPORTANT NOTES!
More informationSERVICE INVOICE USED TRUCK INVENTORY INVENTORY ALL STORES, XPHDU9X29D Customer Fleet ID Year Make 2009 PETERBILT 386
Page 1 of 3 SS100173948:01 Bill-To Customer 9609 Owner 9609 INVENTORY ALL STORES P.O. Number / Auth# V.I.N. 1XPHDU9X29D789111 BRETT Pinnacle / CBS# Vehicle Unit ID # 9D789111 0 Inv Limit Customer Fleet
More informationEdition 10 March Air Grinder, Die Grinder and Sander. G3 Series (Angle) Parts Information. Save These Instructions
80153232 Edition 10 March 2015 Air Grinder, Die Grinder and Sander G3 Series (Angle) Parts Information Save These Instructions G3 Series (Angle) Air Grinder, Die Grinder and Sander Exploded Diagram - Body
More informationAg Leader Technology. Combine Installation New Holland TC 57, 59. Monitor Installation
Monitor Installation Figure 1. Monitor installed on right side cab window using window mount bracket. 1. If you are in very humid conditions where moisture may condense on the glass where you are mounting
More informationMTV-1100/1105. Material Transfer Vehicles MATERIAL TRANSFER VEHICLES. MTV-1100/1105e. ENGINE Tier 4F, Cummins QSB hp (186 2,200 rpm
MATERIAL TRANSFER VEHICLES MTV-1100/1105e Material Transfer Vehicles MTV-1100/1105 ENGINE Tier 4F, Cummins QSB6.7 250 hp (186 kw) @ 2,200 rpm OPERATING WEIGHT MTV-1100: 47,890 lbs (21,722 kg) MTV-1105:
More informationTABLE OF CONTENTS. S-4000 BH Omron. Needle Bar Clamping Thread Trimmer Shifter Mechanism Feed Mechanism...
TABLE OF CONTENTS S-4000 BH Omron Needle Bar... 2 Clamping... 4 Thread Trimmer... 6 Shifter Mechanism... 8 Feed Mechanism... 10 Looper Mechanism... 14 Base... 16 Bite Mechanism... 18 Knife Thread Draw-OFF
More information9895 Combine Parts Catalog EFF. S/N HSC8101
9895 Combine Parts Catalog EFF. S/N HSC8101 1 FORWARD ALPHABETICAL INDEX The complete alphabetical index appears at the beginning of this publication. It is used to locate major groups, assemblies and
More informationParts Information. Air Grinders, Air Die Grinders, Air Sanders and Air Belt Sanders. Save These Instructions. G1 Series (Angle)
80156458 Edition 5 May 2014 Air Grinders, Air Die Grinders, Air Sanders and Air Belt Sanders G1 Series (Angle) Parts Information Save These Instructions G1 Series (Angle) Air Grinder, Die Grinder, Sander
More informationRepair Parts Parts List For RIDGID 12" Compound Miter Saw Model No. MS12502 RIDGID parts are available on-line at
Parts List For RIDGID " Compound Miter Saw Model MS0 Figure 0 0 0 0 Parts List For RIDGID " Compound Miter Saw Model MS0 Figure Always order by part number - not by key number 0 0 0-0- 0-0 -0 0 0 00 Fence
More informationSnow Blower Assembly Standard Flow to Serial Number High Flow to Serial Number 11135
Snow Blower Assembly - 01-1500 Standard Flow to Serial Number 06336 High Flow to Serial Number 11135 Snow Blower Decal list Label Letter Description QTY. A Warning Do Not Put Hands In 2 B Contact Information
More informationPFadvantage MF 6850/6855; Ideal 9080/9090
MF 6850/6855; Ideal 9080/9090 Note: Indented items indicate parts included in an Quantity by Model assembly listed above MF Ideal Part Name/Description Part Number 6850 6855 9080 9090 Instruction Kit MF
More informationInstruction Manual. SaltDogg Spreader Hopper Poly Electrical 0.65 cubic yards. Table of Contents. General Information. Vehicle Requirements: WARNING
SaltDogg Spreader Hopper Poly Electrical 0.5 cubic yards Instruction Manual Table of Contents General Information... Warranty Information... Safety Precautions... Installation Instructions... -3 Spreader
More informationEdition 3 July Air Grinder. M2 Series. Parts Information. Save These Instructions
48420541 Edition 3 July 2015 Air Grinder M2 Series Parts Information Save These Instructions M2 Series Air Grinders - Exploded View (Motor & Motor Housing) 22 21 16 14 15 13 7 5 4 2 1 20 12 6 3 31 29 28
More informationPrepare to Install Rock Doors
2. Verify all parts have been received in this kit by checking the parts list at the end of this document. JEEP WRANGLER, RUBICON, UNLIMITED ROCK DOOR KIT INSTALLATION INSTRUCTIONS 1980-1986 CJ 1987-1995
More informationTABLE OF CONTENTS. S4000 LT Omron
TABLE OF CONTENTS Needle Bar... 3-2 Clamping... 3-4 Thread Trimmer & Material Trimming... 3-6 Shifter Mechanism... 3-8 Feed Mechanism... 3-10 Looper Mechanism... 3-14 Base... 3-16 Bite Mechanism... 3-18
More information601 N. Broadway Salina, KS Veris MSP3 EC/pH/OM Parts Manual
601 N. Broadway Salina, KS 67401 Veris MSP3 EC/pH/OM Parts Manual MSP3 Sub-Assemblies 2 Table of Contents MSP 3150 Base Unit... 4, 5 Coulter Assembly... 6, 7 ph Sampler... 8-10 Electrode Holder... 11,
More informationAGCO Massey Ferguson Combine Models 8780, 9690, Lincoln Automatic Lubrication System Installation Instructions
AGCO Massey Ferguson Combine Models 8780, 9690, 9790 Lincoln Automatic Lubrication System Installation Instructions System Overview Thank you for purchasing the Quicklub On Board Grease System for your
More informationTABLE OF CONTENTS. Warranty Disclaimers Delivery Checklist After Sale Checklist Safety Set Up... 8
TABLE OF CONTENTS Pickett Equipment Warranty... 2 Warranty Disclaimers... 3 Delivery Checklist... 4 After Sale Checklist... 4 Safety... 5-7 Set Up... 8 Machine Adjustments and Operation... 9 Maintenance
More informationREAD COMPLETELY BEFORE QUOTING REPOWER
ATTENTION READ COMPLETELY BEFORE QUOTING REPOWER As in any REPOWER, experience has shown that a piece of equipment designed for older Tier 0 or Tier model engines almost always has trade-offs and compromises
More information2012 General Motors. All rights reserved.
2001 Saturn L300/LW300 L100, L200,LW200, L300, LW300 VIN J Service Manual Document ID: 1551949 #99-00-91-002E: Steering Wheel Shake or Vibration at Highway Speeds (Balance Tire/Wheel Assemblies, Replace
More informationINSTRUCTION GUIDE 6793
1. Remove the old seat and suspension. 2. For models with the slanted front section on the seat well, bolt the PED JD W43A plate to the bottom of the PED JD W43 with two 5/16 x 3/4 carriage bolts and flange
More informationDECEMBER PRODUCT NEWS FAN BELT & PULLEY KITS NEW FITTING TOOL NEW NEW NEW NEW 58680K 59375K 59694K 59889K FOR PULLEY
DECEMBER PRODUCT S 58574 Ball Joint John Deere 6100R 6200R Series 755 Axle OE Ref: AL209479 58573 Track Rod End John Deere 6100R 6200R Series 755 Axle OE Ref: AL209329 FAN BELT & PULLEY KITS 58680K 6110
More informationCarburettor. Cylinder. Frame. Engine Brake System. PTO (Power Take-Off) Electrical System. Steering. Seat. Lifting Device.
Documents Carburettor Cylinder Frame Engine Brake System Technical information Article number 13-1318-13 Season 1990-1991 Brand Code Stiga Product Name PARK 12HST SubCategory Park Compact Type Machine
More informationINSTALLATION INSTRUCTIONS CR-V. Parts List. Tools and Supplies Required. Before You Begin. Customer Information BASE CARRIER SEP.
INSTALLATION INSTRUCTIONS Parts List BASE CR-V SEP. 2006 Front base carrier (with FRONT label) Rear base carrier Special nuts (8) Torx wrench Tools and Supplies Required Flat-tip screwdriver Shop towel
More informationIllustrated Parts: Flail Mower (BladeRunner) 24 & 30
Illustrated Parts: Flail Mower (BladeRunner) 24 & 30 Revised 7/10/2017 BCS America 5001 N Lagoon Portland, OR 97217 www.bcsamerica.com Phone: 800-543-1040 Fax: 800-777-7069 Flail Mower 24" & 30" Gear Box
More informationFord Mustang PowerBrake Booster COnversion Kit & Pedal
1967-1970 Ford Mustang PowerBrake Booster COnversion Kit & Pedal Installation Instructions Note: Always refer to the vehicle owner s manual for correct torque specifications when installing kit. Unboxing
More informationCOMBINE HEADER INSPECTION REPORT
COMBINE HEADER INSPECTION REPORT Personalized For: Owner Name: Address: City, State, ZIP Code: City, Province, Postal Code: Job Number: Date: Grain Header Size and Model: Grain Header Serial Number: Corn
More informationHYDRAULIC EXCAVATORS HX230E I HX240E I HX270E I HX310E I HX390E HX500E I R964C I R974C
E HYDRAULIC EXCAVATORS HX230E I HX240E I HX270E I HX310E I HX390E HX500E I R964C I R974C This innovative system technology includes the exclusive energyefficient; Positive Control twin-circuit hydraulic
More informationPart Name/Description Part No
Parts List for Combine Note: Indented items indicate parts included in an assembly listed above Quantity by Model Part Name/Description Part No. 4425 4435 Instruction Kit JD 4425-4435 2005100-2 1 1 Moisture
More informationFD75 FlexDraper Product Training
Overview MacDon continues to raise the bar in draper technologies. The new 5 Series product line features improvements and innovations that translate into real world harvesting results. New Product for
More informationPRE DELIVERY INSPECTION 6200 / 6280 / 6350 / 6450/ 6550ST/ 6700ST TOW BEHIND Date:
Effective Sept 15/14 PRE DELIVERY INSPECTION 6200 / 6280 / 6350 / 6450/ 6550ST/ 6700ST TOW BEHIND Date: Dealer: Model: Serial # DETAILED SPECIFICATIONS: REAR TIRES FRONT TIRES 18.4 x 26 R1 Lug tires 21.5L-16.1
More informationBALE KING GT40 Grain Feeder Operator's & Parts Manual Last Update: November 20, 2014 Bridgeview Manufacturing Inc - 1 -
BALE KING GT40 Grain Feeder Operator's & Parts Manual Last Update: November 20, 2014 Bridgeview Manufacturing Inc - 1 - Your Authorized Dealer: Your Serial Number: The Serial Number is located on the tank.
More informationMODEL HM A01
BREAKER HAMMER MODEL HM800 06-03 5 4 3 2 0 9 8 7 6 5 4 3 2 6 7 8 36 35 32 3 30 9 20 25 26 24 23 22 2 29 28 27 57 56 55 54 53 52 5 50 49 48 47 46 45 44 43 42 39 4 40 4 38 37 34 33 2 3 A0 23 2 Model HM800
More informationSPARE PARTS MANUAL FOR LOG SPLITTER
ENGLISH Hakki Pilke 37 SPARE PARTS MANUAL FOR LOG SPLITTER MAASELÄN KONE OY Valimotie 1, FI-85800 Haapajärvi, Finland Tel. +358 (0)8 7727300, Fax +358 (0)8 7727320 info@maaselankone.fi www.maaselankone.fi
More informationFORD EXPLORER & MAZDA NAVAJO BODY LIFT KIT INSTALLATION INSTRUCTIONS KIT# KIT# 793
3651 N Highway 89 Chino Valley, AZ 86323 (928) 636-7080 FORD EXPLORER & MAZDA NAVAJO BODY LIFT KIT INSTALLATION INSTRUCTIONS 1990-1994 2 KIT# 792 1990-1994 3 KIT# 793 Installation of a Performance Automotive
More informationIsuzu BB-6BG1T 396 CID (6.5 L) 138 HP (103 1,950 rpm 392 lbf ft (532 1,600 rpm
Specifications Engine Electronic engine control, water cooled, 4-cycle diesel, 6 cylinder, turbocharged. Model Displacement Net horsepower Torque 210TL 240TL 290TL 350TL 370TL Isuzu BB-6BG1T 396 CID (6.5
More informationSECTION CENTRIFUGAL HVAC FANS
SECTION 233416 - CENTRIFUGAL HVAC FANS 1. PART 1 GENERAL 1.1. RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More informationOwner s Manual, Operating Instructions Manual, and Replacement Parts Manual. Lift-Rite Hand Pallet Trucks Model SS45
Owner s Manual, Operating Instructions Manual, and Replacement Parts Manual Lift-Rite Hand Pallet Trucks Model SS45 This publication, 1188027A, applies to the Lift-Rite Hand Pallet Truck, Model SS45 and
More informationParts catalogue BUSH CUTTER
ISSUED NO..71H-1 Parts catalogue BUSH CUTTER (EXPORT MODEL).71, MODEL. SH71. CODE 0257-0258- CONTENTS Fig. 1 HANDLE --------------------------------------------- 1 Fig. 2 FRAME -----------------------------------------------
More informationEdition 9 March Air Grinder, Die Grinder and Sander. G2 Series (Angle) Parts Information. Save These Instructions
04581237 Edition 9 March 2015 Air Grinder, Die Grinder and Sander G2 Series (Angle) Parts Information Save These Instructions G2 Series (Angle) Air Grinder, Air Die Grinder and Air Sander - Exploded Diagram
More informationFlow Sensor Deflector Deflector
Parts List of Combine Kit Note: Indented items indicate parts included Quantity by Model in an assembly listed above Early Models* 9 9 9 4 5 6 0 0 0 Part Name/Description Part No. 0 0 0 Instruction Kit
More informationSPARE PARTS LIST TRIMMERS/EDGERS 323 LD,
SPARE PARTS LIST TRIMMERS/EDGERS 323 LD, 2008-03 ACCESSORIES 323 LD, 2008-03 ACCESSORIES 323 LD, 2008-03 Ref Part No Description Remark QTY KIT 1 531 00 92-48 FILTER OIL 1 2 502 28 59-01 STOP 1 3 501 60
More informationNEW SYSTEM SPECIFICATIONS AND DIAGRAMS
NEW SYSTEM SPECIFICATIONS AND DIAGRAMS GAMMILL, INC. 1452 Gib son St., West Plains, MO 65775 800-659-8224 TABLE OF CONTENTS Diagram #1: Internal Components...1 Diagram #2: External Components...2 Diagram
More informationSALES PRICES GOOD THROUGH 12/15/17 1
1 BUSHINGS 225-862 4 $ 2.10 Flange Bushing Ariens 05503000 Bushing 225-839 4 $ 2.07 Flange Bushing Ariens 05503500 Bushing 225-854 4 $ 2.10 Flange Bushing Ariens 05503900 Bushing 225-110 4 $ 1.55 Flange
More informationFor more information about Agilent Technologies services please visit our web site using the following URL
Agilent Preventive Maintenance provides factory recommended service for your analytical systems to assure reliable operation and the accuracy of your results. Delivered by highly-trained and certified
More informationJOHN DEERE COMMERCIAL PRODUCTS ADVANTAGE COMPACT UTILITY TRACTORS 3005 Tractor Equipment for Base Machine
3005 Tractor Equipment for Base Machine ENGINE: Yanmar Three Cylinder Liquid Cooled Diesel Engine Interim Tier IV EPA Emmissions Certified Engine HP 27.5 (20.2kW)** PTO HP 23.5 (17.5kW) Rated Speed 2700
More informationSPARE PARTS LIST BRUSHCUTTERS/CLEARING SAWS 223 L,
SPARE PARTS LIST BRUSHCUTTERS/CLEARING SAWS 223 L, 2006-01 ACCESSORIES 223 L, 2006-01 ACCESSORIES 223 L, 2006-01 Ref Part No Description Remark QTY KIT 1 501 78 33-01 SUSPENSION BAIL 1 2 503 21 83-16 SCREW
More informationEM2040L High-Speed CNC Vertical Machining Center
Page 1 of 8 8-180063 EM2040L High-Speed CNC Vertical Machining Center MACHINE FEATURES CHEVALIER s EM series VMCs are designed for high precision, productivity, and high speed machining in different industries,
More informationEdition 5 September Air Grinder, Die Grinder and Sander. G2 Series (Angle) Parts Information. Save These Instructions
04581237 Edition 5 September 2008 Air Grinder, Die Grinder and Sander G2 Series (Angle) Parts Information Save These Instructions G2 Series (Angle) Air Grinder, Air Die Grinder and Air Sander Exploded
More informationThe Gaylord Duct Sump Maintenance Manual For Model "GDS" GAYLORD INDUSTRIES
Revised August 2018 The Gaylord Duct Sump Maintenance Manual For Model "GDS" GAYLORD INDUSTRIES 10900 SW AVERY STREET TUALATIN OR 97062-1149 1-800-547-9696 P: 503-691-2010 F: 503-692-6048 THIS PAGE INTENTIONALLY
More informationSERVICE DATA POWER PRUNER ECHO: PPF-300ES ECHO: PPT-300ES. (Serial number : and after) CONTENTS INTRODUCTION
17-28A-00, 1 1 SERVICE DATA We are constantly working on technical improvement of our products. For this reason, technical data, equipment and design are subject to change without notice. All specifications
More informationDODGE TRUCK INSTALLATION INSTRUCTIONS /2500/3500 PICKUP KIT SUM /2500/3500 PICKUP KIT SUM
DODGE TRUCK INSTALLATION INSTRUCTIONS 1994-1996 1500/2500/3500 PICKUP KIT SUM-7866300 1997-1999 1500/2500/3500 PICKUP KIT SUM-7867300 Installation of a body lift will change the center of gravity and the
More informationJohn Deere. MODEL: 4320 Tractor JD-S-TM1029
John Deere MODEL: 4320 Tractor THIS IS A MANUAL PRODUCED BY JENSALES INC. WITHOUT THE AUTHORIZATION OF JOHN DEERE OR IT'S SUCCESSORS. JOHN DEERE AND IT'S SUCCESSORS ARE NOT RESPONSIBLE FOR THE QUALITY
More informationOperating Instructions Parts List
Operating Instructions Parts List FH1025-SMS-001_EN Hand Stacker 1.0T/2.5M Note: Owner and operator MUST read and understand this operating instructions before use this hand stacker. Date:March, 2012 Welcome
More informationTABLE OF CONTENTS S-4000 ISBH+I SM
TABLE OF CONTENTS Needle Bar... Clamping... Clamping Angle... Thread Trimmer... Shifter Mechanism... Feed Mechanism... Looper Mechanism... Base... Bite Mechanism... Thread Draw-off Mechanism... Main Cam...
More informationSERVICE PARTS LIST SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS METAL CUTTING SAW SERIAL NUMBER
22-64-0437 SERVICE PARTS LIST SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS CATALOG NO. METAL CUTTING SAW 6370-20 SERIAL NUMBER A35C BULLETIN NO. 54-40-1627 REVISED BULLETIN DATE 54-40-1626 Sept.
More informationBLACK & DECKER SIGHTLINE CIRCULAR SAWS KS846N KS850N KS855N KS865N N
PRODUCT DOSSIER BLACK & DECKER SIGHTLINE CIRCULAR SAWS KS846N KS850N KS855N KS865N 374456N 03-03-98 KS846N_D.PDF Contents Attached to this dossier: Copy of service parts lists KS846N----A KS855N----A KS865N----A
More informationSERVICE PARTS LIST SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS. M18 Sawzall
Pull both Brush Tubes (25) back before removing or installing the Armature (2) to prevent damage to the commutator. Brush Tube SERVICE PARTS LIST SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS
More informationSERVICE PARTS LIST SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS. 18 Volt Sawzall STARTING SERIAL NO. Spindle (38) to be assembled
Pull Brush Tubes () back before removing or installing the Armature (21) to protect commutator. SERVICE PARTS LIST SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS 18 Volt Sawzall CATALOG NO. 2620-20
More informationSPARE PARTS LIST BRUSHCUTTERS/CLEARING SAWS 325 RX,
SPARE PARTS LIST BRUSHCUTTERS/CLEARING SAWS 325 RX, 2008-03 ACCESSORIES 325 RX, 2008-03 ACCESSORIES 325 RX, 2008-03 Ref Part No Description Remark QTY KIT 1 531 00 92-48 FILTER OIL 1 2 502 28 59-01 STOP
More informationSERVICE PARTS LIST SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS. 18 Volt Sawzall STARTING SERIAL NO. See note on page 3.
Pull Brush Tubes () back before removing or installing the Armature (2) to protect commutator. SERVICE PARTS LIST SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS 8 Volt Sawzall CATALOG NO. 2620-20
More informationSAFETY FIRST! HEALTH AND SAFETY AT WORK WARRANTY
1. READ THE INSTRUCTION BOOK THOROUGHLY before attempting to operate or carry out any maintenance on the machine. If you do not understand any part of this manual, ask your dealer for assistance. 2. ALWAYS
More informationNOTE: Indented items indicate parts included in an assembly listed above. Early* Late** M3 M3 Part Name/Description Part No.
Parts List Gleaner L2, L3, M2, M3 NOTE: Indented items indicate parts included in an Quantity by Model assembly listed above. Early* Late** M3 M3 Part Name/Description Part No. M2 L2 L3 L3 Instruction
More informationAP755 Asphalt Paver Product Introduction
AP755 Asphalt Paver Product Introduction AP755 Overview Cat C7 engine with ACERT Technology provides 149 kw (202 hp) of gross power (SAE J1995) Advanced hydrostatic propel control system. Standard paving
More informationEM-2033L CNC VERTICAL MACHINING CENTER
Page 1 of 11 Quote No. 021315-5 EM-2033L EM-2033L CNC VERTICAL MACHINING CENTER Page 2 of 11 Quote No. 021315-5 EM-2033L CHEVALIER s EM series VMCs are designed for high precision, productivity, and high
More information2013 NATEF Task Area A-4 Suspension, Steering, Alignment7-2013
2013 NATEF Task Area A-4 Suspension, Steering, Alignment7-2013 A. Steering System Diagnosis & Repair B. Suspension System Diagnosis & Repair C. Wheel Alignment Diagnosis & Adjustment D. Wheel & Tire Diagnosis
More information133x152 TWO PRODUCT RAMBLER. 133x152 TRACK MOUNTED IMPACT CRUSHER. Two Bars Per Row. 150mm x 320mm Bearing With Big Cast Base. Each Hammer lbs.
Construction Equipment Co. 2 5 1 x 3 3 1 Feeder Size 58 x 18 CAT 600hp Impactor 133x152 Track Mobile Impactor Features Heavy Duty Rotor 4 x 8 Backing Bar With Replaceable Seats 14 Steel Rotor Core Dual
More informationSeries 8500 Centrifugal Swingout Fans Design 8510 Centrifugal Airfoil Design 8520 Centrifugal BI
Bulletin 8510-4 May 2000 Series 8500 Centrifugal Swingout Fans Design 8510 Centrifugal Airfoil Design 8520 Centrifugal BI Description Index Series 8500 Centrifugal Swingout Fans The Series 8500 Centrifugal
More informationOwner s Manual, Operating Instructions Manual, and Replacement Parts Manual. Lift-Rite Titan Series Hand Pallet Trucks Model LCF55 - Freezer Special
Owner s Manual, Operating Instructions Manual, and Replacement Parts Manual Lift-Rite Titan Series Hand Pallet Trucks Model LCF55 - Freezer Special Lift-Rite, 5975 Falbourne Street, Mississauga, Ontario
More informationMKX 130 Series Augers
. MKX 130 Series Augers Steel Trussing Trussing provides maximum strength and stability at all heights. Steel trussing on 84', 94' & 114' units increase tube rigidity and ensure smooth operation. Powder
More informationWATER TRUCK MANUAL STGGLOBAL.NET
WATER TRUCK MANUAL 1300 998 784 STGGLOBAL.NET 2 WATER TRUCK MANUAL Operation Manual Suggested operating procedure.. Page 3 Filling the tank. Page 5 Spray heads Page 5 Self fill/dam fill....page 7 Recommended
More information6. Document tasks performed during visit and report any observations to the appropriate
Chiller Annual Maintenance RFP Attachment B Services Required Tasking: Vibration Analysis 1. All work shall be performed in accordance with safety policies 2. Check with appropriate customer representative
More informationMF SERVICE PARTS GUIDES
MF SERVICE PARTS GUIDES All rights reserved. No part of this publication may be used, reproduced, distributed, transmitted, translated, stored in a retrieval system or reduced to any electronic medium
More informationInstallation Guide CLAAS Lexion Combines with 9 inch Elevators
Installation Guide CLAAS Lexion Combines with 9 inch Elevators 955614_01 4/17 1 Table of Contents System Overview 3 Quick Start Guide 4 Flow Sensor Installation 5 Hydraulic Elevator Adjustment Kit Installation
More informationInline 6 series turbocharger with exhaust gas recirculation (EGR) and selective catalytic reduction (SCR) Valves per Cylinder 4
SPECIFICATIONS Engine Manufacturer and Model John Deere PowerTech PSS 6090 Non-Road Emission Standards EPA Final Tier 4/EU Stage IV Configuration Inline 6 series turbocharger with exhaust gas recirculation
More informationOperator s Manual and Assembly
Operator s Manual and Assembly Published: Mar 24, 2017 Manual Part No. AH02-00-MAN Gatco Manufacturing Inc. www.gatcomfg.com Location: 2524 South Service Road West, Swift Current, SK, Canada Mail: Box
More informationFull Flow Reverse Circulation Junk Baskets. Manual B320
Full Flow Reverse Circulation Junk Baskets Manual B320 CONTENTS Logan Full Flow Reverse Circulation Junk Basket Overview... 2 Uses... 2 Construction... 2 Tool Illustration... 3 Operation... 4 Recovering
More informationMODEL: 4640 & 4840 Chassis Only Volume 1 of 3
John Deere MODEL: 4640 & 4840 Chassis Only Volume 1 of 3 THIS IS A MANUAL PRODUCED BY JENSALES INC. WITHOUT THE AUTHORIZATION OF JOHN DEERE OR IT'S SUCCESSORS. JOHN DEERE AND IT'S SUCCESSORS ARE NOT RESPONSIBLE
More informationCombine Kit Parts List New Holland Late TR89, Late TR99 (Yield Monitor Ready)
Combine Kit Parts List Note: Indented items indicate parts included Quantity by Model in an assembly listed above Late Late TR TR Part Name/Description Part No. 89 99 Instruction Kit NH YM Ready TR89,
More information