Combine Kit Parts List New Holland Late TR89, Late TR99 (Yield Monitor Ready)

Size: px
Start display at page:

Download "Combine Kit Parts List New Holland Late TR89, Late TR99 (Yield Monitor Ready)"

Transcription

1 Combine Kit Parts List Note: Indented items indicate parts included Quantity by Model in an assembly listed above Late Late TR TR Part Name/Description Part No Instruction Kit NH YM Ready TR89, Flow Sensor Assembly Model Elevator Deflector TRX5-X8, Elevator Deflector TR Parts Kit Box 12x6x x6x4 1 1 Elevator Spacer Bar - TRXX Cover Spacer Ready NH TR Header Sensor Installation Kit TR89,96,97,98, Bag - white block - reclosable - 2 mil - 4 x x6 1 1 Hex Hd Capscrew, Coarse Thd, Gr 5, ZP 5/16 x 1 in Hex Nylock Nut, Coarse Thd, ZP 5/16 in Flat Washer, Standard, ZP 5/16 in Drill Bit Tin Coated Size F F 1 1 S-Hook - #63 bent angled Extension Spring Self Tapping Screw, Coarse Thd, Gr 5, 5/16 x 3/4 in Elevator Drive Chain Kit Case / NH OEM Chain Link Elevator Chain Roller Link Chain Link Elevator Chain Connector Link Bag White Block reclosable 2 mil 4 x 6 in x6 1 1 Lower Adjuster 1-1/4 in. brg + 3/8 in. screws blk Lower Adjuster Inst. Kit YM Ready TR89, Nametag Do not Adjust, Use Lower Adjuster Bearing in Offset Link Conveyor Chain CA Bag White Block Reclosable 2 mil 5 x8 in x8 1 1 Alcohol Swab Pack Header Sensor Standard Arm Assy (18 in. rod, S-hook) Rod 1/4 in. 20 x 36 in S-Hook - # Hex Nut, Coarse Thd, ZP 1/4 in Split Lockwasher, ZP 1/4 in Late Model TR89 (Yield Monitor Ready): After Serial Number Late Model TR99 (Yield Monitor Ready): After Serial Number

2 Note: Indented items indicate parts included Quantity by Model in an assembly listed above Late Late TR TR Part Name/Description Part No Optional Moisture Sensor Kits (only one kit used) Moisture Sensor Kit (Grain Tank Auger) 1 1 Box - 6 x 6 x Optional Moisture Sensor (24 foot) Cutout Template Hose Clamps 39 in Moisture Sensor Installation Kit Bag - white block - reclosable - 2 mil 5 x 8 in x8 1 1 Clearance Gauge Drill Bit - Tin Coated - # Self Tapping Screw, Coarse Thd, Gr 5, #10 x 3/8 in Cable clamps - 1/4 in Moisture Sensor 15 ft (For elevator Mount) Elevator Mount Moisture Sensor Kit (Grain Elevator) Elevator Mount Unit- LH Black Battery Power Cable 16 ft.- moisture sensor E.M.S. Installation Kit Standard E.M.S. Instruction Kit Box Single Walled 18x18x Cable Kit YM Ready TR89, Box - 12 x 12 x x12x4 1 1 Cab Cable NH OEM Distribution Cable Flow Sensor Cable 6 ft 6 in long Ground Speed Cable TRX6,X7,X8,X Elevator Speed Cable Cable Installation Kit W P plugged tower 3 pin Phillips Pan Hd, Coarse Thd., YZP, #4-40 x 3/8 in Hex Nut, Coarse Thd., Gr. 5, YZP, # Cable Tie 15 in. - Black Cable Clamp 3/8 x 1/4 in. wide Cable Clamp 1/2 x 3/4 in Cable Clamp 1/2 x 3/4 in. wide Late Model TR89 (Yield Monitor Ready): After Serial Number Late Model TR99 (Yield Monitor Ready): After Serial Number

3 Combine Kit Parts List Note: Indented items indicate parts included Quantity by Model in an assembly listed above Late Late TR TR Part Name/Description Part No Right Post Bracket Monitor Bracket Inst. Kit Hex Hd Capscrew, Coarse Thd, Gr 5, ZP 1/4 x I in Hex Nut, Coarse Thd, ZP 1/4 in. in Split Lockwasher, ZP 1/4 in Flat Washer, Standard, ZP ¼ Self Tapping Hex Slotted Screw, Gr 5, 5/16 x 3/ Hex HD Capscrew, Coarse Thd, YZP, 5/16 x ¾" Late Model TR89 (Yield Monitor Ready): After Serial Number Late Model TR99 (Yield Monitor Ready): After Serial Number

4 Important Notices You will save time and prevent wrong installation of components by closely following these step-by-step instructions. If you have any questions call at Signal words (CAUTION, IMPORTANT and NOTE) are provided to draw attention to information that is important for the safe/correct installation and operation of this product. CAUTION will alert you to situations that will impact the physical safety of you or others. IMPORTANT will alert you to the potential for damage to the product or loss of data. NOTE will provide you with additional information to simplify a procedure or clarify a process. Section Contents Item Page Installing Monitor in Cab 9-2 Installing Cab Cable (Power Cable) 9-4 Installing Elevator Speed Cable 9-7 Installing Ground Speed Cable 9-8 Installing Header Height Sensor 9-10 Installing Grain Flow Sensor and Deflector Plate 9-13 Installing Moisture Sensor 9-16 Installing Elevator Adjuster 9-22 Final Inspection 9-26 Operational Checkout for PF Series Monitor 9-26 Operational Checkout for YM

5 Installing Monitor in Cab Parts required for this procedure: Monitor Unit Monitor Mounting Bracket (Right Post Bracket) Monitor Bracket Installation Kit The recommended mounting position on the right cab post is shown in Figure 1. This location places the monitor within easy reach and in a convenient viewing position. Figure 1. Post Bracket Mounted to Cab Post in TR86, TR87, TR88, TR89, TR96, TR97, TR98 and TR99 8-2

6 Step-by-Step Procedure 1. Determine the position for the bracket on the right cab post. Positioning the top of the base approximately four inches down from the cab ceiling is the recommended location (Figure 1). 2. Using the bracket as a template, mark the holes on the cab post using the provided sharpie marker. NOTE: On late model TR89 and TR99 combines, there may be existing holes on the right post that can be used to mount the bracket. Two 5/16 bolts are included in the kit to utilize the existing holes if applicable. 3. Center punch the hole marks to maintain proper alignment. 4. Drill the holes using the provided 13/64 drill bit. 5. Attach the bracket to the cab post with two 5/16 self tapping screws. 6. Attach the u-bracket to the post bracket using ¼ hardware. Do not tighten. NOTE: The post bracket has several mounting slots to provide flexibility in choosing the final mounting location. 7. Before tightening the u-bracket, install the monitor to finalize your location. 8. Remove monitor and tighten u-bracket. 9. Reinstall monitor in u-bracket. 9-3

7 Installing Cab Cable and Power Cable Parts required for this procedure: Cab cable (large diameter black cable with rectangular 25-pin connector matching the connector on the bottom of the monitor) Distribution cable (the bundle of 8 in. long wires with six connectors) Stick-on snap-open/closed cable clips (4) #4x 3/8 in. Phillips Pan Hd, Coarse Thd (4) #4 Hex Nut, Coarse Thd Cable Ties 15 in. and 6 WP plugged tower 3 pin 1. Move the seat forward and tilt it forward also to give you room to work behind the seat. If this is not enough room remove the seat from the cab by removing the four bolts and washers the secure the seat to the floor. 2. Remove knob from gearshift lever by unscrewing it. Also remove the four screws and the cover from the right side console (See Figure 7). Remove Cover 4 Screws Gearshift Knob Figure 7. Right Console and Gear Shifter 9-4

8 3. Remove two access panels behind the seat which are covering electrical relays and wiring. Fold foam matting upwards. Remove the large access panel behind the foam matting and above the two panels just removed (See figure 8). Foam Matting Electrical Covers Access Panel Figure 8: Access panels behind cab seat. 4. Fold the foam matting back at the left end of the relays (under the buddy seat) and remove the tape covering a large hole. Install the bulkhead end (end with round connector and square flange) of the cab cable in the hole. Attach to the wall using four #4 X 3/8 in. machine screw and nuts. Make sure to insert screws from the back into the cab so not to interfere with harness connection to the bulkhead connector. 5. Route the cab cable (all three strands) across the back of the cab and into the right side console through opening. The two corrugated wires stay in the console, while the monitor cable should be routed out the right side of the console and forward between the cab wall and the console. 6. Route the monitor cable up the left side of cab post to the monitor. Use stickon cable claps to hold cable in place. Attach cable to monitor as shown in Figure 9. Make sure to secure the harness strands to existing harnesses using cable ties. 9-5

9 IMPORTANT: Never use force to mate electrical connectors. If the connectors do not push together easily, they are not aligned properly. Using force will only result in damage to the connectors. Figure 9. Attaching cab cable to monitor unit Installing Power Strands of Cab Cable 7. Locate the single spade connector in the console on the orange wire (See figure 10) and uncouple it. Tee into the orange wires with the power strand of the cab cable. Make sure the 5 amp fuse is installed in the yellow fuse holder. Existing orange cable Power Connection Figure 10. Power Tee in Connection 9-6

10 8. Mount large terminal of ground strand on 3/8 in. ground stud at rear of console having several ground wires connected to it. The stud is long enough you can attach ground terminal with the additional nut provided without removing the existing nut. 9. Now install the distribution cable onto the cab cable connector on the back wall of the cab. Take the 3 pin tower plug (part# ) and plug it into the 3 pin shroud (power end) of the distribution cable to prevent dirt build up in plug. 10. Turn monitor power switch ON to ensure it has power with the ignition key in the OFF position. 11. If the monitor is getting power correctly you can replace the console cover, gear shift lever, and the electrical covers. Installing Elevator Speed Cable Parts required for this procedure: Elevator speed cable (identified by tag at the end with two connectors) Cable ties Step-by Step Procedure NOTE: In all steps, tie elevator speed cable to the combing at 12 to 24 in. intervals. Be sure cable is tied down well enough to keep it from moving parts. 1. Locate connection between clean grain auger low shaft speed sensor (at left end of clean grain auger) and the combines wiring harness. (Figure 11.) 2. Disconnect the original connectors. 3. Install end of the elevator speed cable, with two connectors, between the existing wiring harness and low shaft speed sensor (be sure you have the elevator speed cable not the ground speed cable). (Figure 11.) 4. Route cable upwards along the wire leads to fan speed sensor, tying elevator speed cable to existing wiring. 5. Then route it forwards with the existing wiring harnesses and over to the distribution cable. 9-7

11 Existing Harness Elevator Speed Cable connector Figure 11. Elevator Speed Cable Connection 6. Working through the access hole in the back wall of cab route the elevator cable through or tie to the three large cable clamps, located to the rear of concave rockshaft and left of the returns cross auger. 7. Attach the elevator speed cable to the distribution cable and make sure use cable ties as necessary to secure the new harness away from rotating components. Installing Ground Speed Cable Parts required for this procedure: Ground speed cable (identified by tag at the end with two connectors) Cable ties 9-8

12 Step-by-Step Procedure NOTE: In all steps, tie ground speed cable to combine at 12 to 24 in. intervals. Be sure it is tied down well enough to keep it away from moving parts. 1. Locate connection between ground speed sensor (just above the right-side final drive shaft) and combine wiring harness. (Figure 12.) 2. Disconnect original connectors. 3. Install end of the ground speed cable, with two connectors, between existing wiring harness and ground speed sensor. Ground Speed Cable connections Existing Cable harness Figure 12. Ground Speed Cable connection 4. Route cable through the opening in the frame just above the left driveshaft and upward along the left front side of the combine following existing wiring behind belt drives. Make sure to keep cable away from moving parts. 5. Route the main connector up behind the cab in front of the concave linkage rockshaft and connect the harness to the correct connector on the distribution cable. 9-9

13 Installing Header Height Sensor Parts required for this procedure: Header height sensor assembly with integral cable Arm assembly (threaded rod with S-(hook) Anchor spring with S-hook and 5/16 in. bolt and nut Two 5/16 x 3/4 in. self tapping screws 9/32 in. drill bit Cable ties Step-by-Step Procedure 1. Underneath cab, locate right side cab support that extends from back to front of the cab. Refer to Figure 13 and locate 3 in. square tube extending from right side cab support to left side of cab. 2. Measure over 1-3/4 in. and 3-1/2 in. from the inside of right cab support and make two marks. From the front edge of the 3 in. square tube measure back 1-1/2 in. and make two marks that intersect the previous two marks. (Figure 13.) 3. Center punch and use the 9/32-in. drill bit to drill two holes through the 3 in. tube. (Figure 13) 4. Mount header sensor to the square tube with 5/16 x 3/4 in. selftapping screws and 5/16 in. flat washers. (Figure 14). NOTE: Mount the header sensor in the two front slots of the header sensor bracket with the cable of the header sensor pointing towards the rear of the combine and the pivot shaft of the header sensor pointing towards the right side of the combine. NOTE: For TR99 drill hole in the inside of the right side shield on the feeder house. 5. Drill 11/32 in. clearance hole in the top of the right side shield on the feeder house, 10 in. back from front edge of shield and in line with arm of the header sensor. 9-10

14 3-1/2 in. 1-3/4 in. 1-1/2 in. Figure 13. Layout for Header Height Sensor Figure 14. Header Height Sensor mounted 9-11

15 6. Attach anchor spring S-hook to shield with 5/16-in. bolt and nut. (Figure 15.) Figure 15. Header Height Sensor installed on TR99 7. Attach the other end of extension spring in S-hook 1/2 in. from end of threaded arm and pinch S-hook closed with pliers. 8. Route the header height cable back to the distribution cable and connect to the appropriate connector. Make sure that any excess cable is tied away from any moving parts. 9-12

16 Installing Grain Flow Sensor and Deflector Plate Parts required for this procedure: Grain flow sensor Flow sensor cable (identical 9-pin connectors on both ends) Stainless steel curved deflector Spacer block (1/2 x 6 in.) Cable ties Step-by-Step Procedure 1. Raise side shield on right side of combine. 2. Remove flow sensor access panel as shown in Figure 16 by removing the four nuts holding the cover on. Flow Sensor Access Panel Figure 16. Access plate and mounting location of flow sensor. 3. Remove the two existing carriage bolts located in the top of the clean grain elevator head (above top shaft of elevator) and insert them through curved deflector plate and the spacer block (holes of spacer should be towards the rear of combine). 9-13

17 4. Insert the carriage bolts back through their original holes. Tighten the nuts enough to hold the curved deflector and spacer up against the top of elevator. 5. Using a hammer and a rod or board, tap on the front edge of deflector to ensure it is fully back against elevator housing. 6. Fully tighten the hardware on carriage bolts. NOTE: Before top shaft can be fully raised, it may be necessary to add additional links to the elevator drive chain. Adjuster Rods Deflector Plate Carriage Bolts Figure 17. Top of Elevator, Adjuster Rod locations Deflector Plate Elevator Paddle Figure 18. Inside view of installed Flow Sensor 9-14

18 Figure 19. Flow Sensor Installed 7. Re-install lock nuts on the adjuster rods and adjust the top shaft up until the clearance between the tip of paddles and deflector plate is 1/2 in. (with paddle directly on top of the sprocket). See Figure 18. IMPORTANT: This adjustment is critical for accurate grain weight calibration. 8. Before installing the flow sensor, install the two aluminum spacer bars (P.N ) over the top and bottom pairs of studs at the opening for the flow sensor. 9. Install the flow sensor into the opening and secure the flow sensor using four locknuts (Figure 19). 10. Connect flow sensor extension cable to flow sensor and tie the cables to the brackets supporting the fuel tank. 11. Route the cable under the returns auger forward following the existing harnesses. Make sure the cable is properly secured away from header drive engaging linkage. 12. Then route the cable to distribution cable and connect to the appropriate connector on the distribution cable. 9-15

19 Installing Moisture Sensor NOTE: Cutouts have been made at the factory for attaching an elevator mount moisture sensor to the combine. It is recommended that the moisture sensor be mounted on the elevator location if possible. IMPORTANT: If you have an elevator mount kit for installing the moisture sensor on the side of the clean grain elevator, ignore the following installation instructions. Installation instructions for the elevator mount kit are included in the box containing the elevator mount kit. The moisture sensor is installed on bottom side of loading auger inside the grain tank, and requires removing 6-1/2 in. of auger flighting from the center of this auger. NOTE: In field conditions where the combine head is continually picking up moist soil and/or green weeds or crop, a buildup of material may develop on the inside of the loading auger tube. In very severe cases, this may cause excessive wear on the auger flighting where the flighting has been removed for the moisture sensor. If the inside of the auger tube has a film of buildup that is thick enough it rubs against the auger flighting, remove the moisture sensor and clean the tube in the area where the flighting is cut and check the flighting for wear. Also these machines are ready for elevator mount moisture sensor. Parts required for this procedure: Moisture sensor Moisture sensor cutout template and clearance gauge Marking pen 32 in. or 39 in. stainless steel clamps 9-16

20 Cable ties Electric drill and drill bits Sabre saw with metal cutting blade Hacksaw or torch for cutting auger flighting Handheld grinder Step-by-Step Procedure 1. Remove loading auger and tube from grain tank with the top auger bearing holding auger in its operating position relative to the tube. 2. On the bottom side of auger tube, make a mark 12-in. from the discharge end of tube. 3. Place cutout template on the auger tube so it is centered on this mark and mark the sensor opening (5-11/16 x 1-11/16 in.), as shown in Figure 20. Figure 20. Marking auger tube using template 9-17

21 4. Drill one or more starting holes for the sabre saw blade and cut the sensor opening, as shown in Figure Cut hole in the tube as accurately as possible. Avoid excess clearance around the plastic sensor housing, since any such clearance will collect fine material that affects the accuracy of the sensor. 6. After cutting the opening, check to see that the raised portion of the plastic part of the sensor housing fits into the opening. If it does not, use a file to enlarge the opening until the sensor just fits. Figure 21. Cutting hole in auger tube 7. Rotate auger inside the tube to align the outside edge of auger with one end of the sensor opening and mark the auger, as shown in Figure Rotate the auger to align the flighting with other end of the sensor opening and again mark the auger. NOTE: The auger must be in its normal operating position relative to the tube when you make these marks 9-18

22 Figure 22. Marking auger inside tube 9. Remove auger from tube and mark auger flighting 3/8 in. outside each of the original marks (3/8 in. lengthwise on the auger, not 3/8- in. along the spiral outside diameter of the flighting). Mark the flighting for cutting at these positions which should be about 6-1/2 in. apart lengthwise on the auger. NOTE: Before cutting the flighting, spot-weld it to the auger shaft outside of each mark. 10. Use a hacksaw or torch to remove 6-1/2 in. length of flighting all the way down to the auger shaft, as shown in Figure Use a grinder or file to smooth off the edges of the flighting. 12. Re-install auger into tube and install the top bearing to hold auger in its operating position. Hold sensor clearance gauge in the sensor opening as shown in Figure 24 and rotate the auger to make sure it clears the gauge. NOTE: If the flighting hits the gauge, additional flighting must be removed to ensure the moisture sensor will not be damaged 9-19

23 Figure 23. Auger with 6-1/2 in. of flighting removed Figure 24. Using sensor clearance gauge to check clearance 9-20

24 13. Place moisture sensor in the opening and clamp it to the tube with one of the long clamps provided, as shown in Figure 25. NOTE: Be sure to install sensor with the direction of grain flow arrow pointing towards the top end of the auger (the sensor cable will be toward the bottom end of the auger). 14. Drill a hole for a sheet metal screw about 90 degrees from the sensor opening and attach the ground strap, as shown in Figure Remove moisture sensor from the auger tube and reinstall auger and tube in the combine. 16. Re-install the moisture sensor into auger tube after it is back in the combine, and route its cable along the grain flow sensor cable to reach the distribution cable (the one which splits the large 24-pin connector out into six smaller connectors). Long Clamp Ground Strap Figure 25. Moisture Sensor installed 17. Use the provided rubber cushioned cable clamps and self tapping screws to tie the moisture sensor cable securely to auger tube and wall of the grain tank. 18. NOTE: Be sure to position one clamp no more than 12 in. from the point where the cable enters the elbow on the moisture sensor. This ensures that wet grain cannot put too much force on the cable. 9-21

25 19. To route the moisture sensor cable outside the grain tank, use the 1-3/8 in. hole saw and drill a hole through the tank floor beside where the loading auger protrudes. Once outside the tank, the moisture sensor cable can be routed forward with the flow sensor cable. NOTE: Make sure the cable goes through the floor very close to the loading auger so that wet grain will not be able to tug on the cable when the tank is unloaded. 20. Use the provided 3/8-in. inside diameter rubber grommet to secure the cable in the hole. 21. If you do not want to drill a hole in the tank floor, you can route the moisture sensor cable over the tank wall, securing the cable to the inside of the tank using rubber-cushioned cable clamps and self tapping screws. 22. Connect the moisture sensor cable to the distribution cable underneath the cab. Installing Elevator Adjuster IMPORTANT: A slide adjuster must be installed at the lower end of the clean grain elevator, to provide an alternate method of adjusting chain slack, so the top shaft of the elevator can remain in a fixed position. You MUST install the adjuster. If you don t your Grain Weight calibration will change every time you move the top shaft to adjust slack of the elevator chain. IMPORTANT: If your elevator chain and top sprocket have several years of use on them, it is recommended you replace them at this time. If these parts are changed at a later date it WILL affect the calibration of the monitor. Parts required for this procedure: Elevator slide adjuster assembly Bearing Half link for elevator chain Do Not Adjust, Use Lower Adjuster decal 9-22

26 Step-by-Step Procedure 1. Disconnect the clean grain elevator drive belt by lifting idler arm and removing belt. 2. Open the bottom of clean grain elevator and turn chain until connecting links are at the bottom. 3. Split the elevator paddle chain by removing the cotter pin and roller pin to disconnect the chain. 4. Remove the locking collar from bearing and rotate it counterclockwise to remove it. Make sure the shaft is clean. 5. Remove the three sets of bolts holding on the bearing flange (See Figure 26). Remove the bearing from the shaft. Inner Deflector bolts Cover Cover Plate Plate Bolt Removed in Step 6 Bolts Removed in Step 6 Bolts Removed in Step 5 Figure 26. Bottom of Clean Grain Elevator 9-23

27 6. Remove the three nuts, washers, and carriage bolts from cover plate. Remove cover plate. 7. Loosen the four bolts above shaft (two on each side) that retain the inner deflector and slide deflector upwards away from the sprocket. 8. Install the bearing and flanges on the lower adjuster. Mount the lower adjuster using four bolts that came with lower adjuster. Figure 27. Lower Adjuster installed 9. Make sure the top shaft is adjusted to achieve 3/8 to 1/2 in. paddle clearance. Refer to Step 17 and Figure 18August in Installing Grain Flow Sensor and Deflector Plate Section of these installation instructions. 10. Re-connect the elevator chain. If required, add a half link. 11. With the lower auger suspended on the elevator chain, tighten all bolts on lower adjuster and the bolts on the inner deflector. 12. Make sure that the cross auger does not bind up or hit the inside of the auger tube by rotating it by hand. 9-24

28 13. Install the bearing locking collar on the bearing. 14. Re-install the elevator drive chain. You will likely need to add the provided links to the drive chain before you re-install it. 15. Place the Do Not Adjust! Use Lower Adjuster decal on the top of the elevator by adjuster locking cover, as shown in Figure 28. Figure 28. Do Not Adjust! Use Lower Adjuster decal location 9-25

29 Final Inspection Installation is now complete. Do a walk around of the combine and complete the following: All cable connections have been made. Excess cable had been tied out of the way, so there is no interference. All tools have been removed from the combine. All cap screws and carriage bolts are tight. Reinstall access panel in the rear wall of cab and reinstall the seat in the cab. Operational Checkout for PF Series Monitor Step-by-Step Procedure Refer to the Display Items section in the Operation Section for instructions on how to display different items on the screen. 1. Start engine. 2. Turn the monitor power switch ON and verify that the monitor turns on properly. A field and load should be displayed at the top 3. Display Elevator Speed on screen. 3a. Verify that elevator RPM stays at zero with the separator and header OFF. NOTE: On some combine models, the header must be engaged to get an elevator speed signal. If you do not get an elevator RPM reading, engage the header drive. 3b. Engage the separator and verify the monitor measures elevator RPM. It should be about 450 RPM at full engine speed. 3. Display Ground Speed on the screen. Move the combine slowly to verify the monitor measures MPH at low speeds (below 1 mph). 4. Start the separator with the combine at rest and verify that the monitor reads 0.0 MPH. 5. Display Head Height on the screen. 6. Lift the head and verify the head height number increases. Lower the head and verify the head height number decreases. 9-26

30 7. Display Temp on the screen and verify that there is a temperature reading. The temperature may be off slightly because it has not been calibrated Refer to the Setup Section of the Operator s Manual to adjust the monitor to your combine. Operational Checkout for YM 2000 Step-by-Step Procedure Refer to General Description in the Setup Section of the Operator s manual for a description of the key. 1. Start Engine. 2. Flip the monitor power switch ON and verify that the monitor turns on properly. (a) The top display should show F1 L1 (b) The lower-left display should show SOYBEANS. (c)the lower-right display should show 0.0 AV/B/A. 3. Push the FLOW key twice to display Elevator RPM. (a) Verify that elevator RPM stays at 0 with the separator and header OFF. (b) Engage the separator and verify that the monitor measures elevator RPM. It should be between 400 and 450 RPM at full engine speed. NOTE: On some combine models, the header must be engaged to get an elevator speed signal. If you do not get an elevator RPM reading, engage the header drive. 4. Move the combine slowly to verify that the monitor measures MPH at low speeds (below 1mph). NOTE: MPH will not agree with the combine s monitor, because the yield monitor has not been calibrated to your combine. 5. Start the separator with the combine at rest and verify that the monitor reads 0.0 MPH. 9-27

31 6. Place the feeder house at about mid-height. 7. Place the AREA COUNT switch in the UP position. 8. Select STOP HEIGHT on the top display. 9. If the red AREA COUNT light is ON, increase the stop height displayed on the top line (using the UP ARROW key for the top display) until the light goes out. 10. If the AREA COUNT light is OFF, decrease the stop height displayed until the light comes on. 11. Verify that the AREA COUNT light goes out as the head is dropped slightly below the original position and comes on as the head is slightly above the original position. NOTE: Use small up and down head movements for this check. If you use large motions, it may appear that the head moves too far before the light changes, because there can be up to a 1 second delay before the monitor gets to the point in its program cycle where it checks header height. 12. Check for proper connection of the moisture sensor as follows (a) Turn On the Yield Monitor (b) Set MOIST = AUTO under the MOIST key. (c) Press the MOIST key five times to display temperature, which should show a number within a few degrees of the actual ambient temperature. (d) If you know the temperature in the area of the moisture sensor accurately, you can adjust the temperature readout with the lower-left UP or DOWN ARROW keys. (e) If you do not get a reasonable temperature reading (it will indicate 20 DEG F if the sensor is not connected), recheck the connections. Call at if you have a problem and cannot find it. NOTE: You cannot get a moisture reading until there is grain flowing through the combine. Also, you will only see the AVG% display when there is no grain flow. *** 9-28

32 Record of Changes Summary of Changes Revision 1 November 2001 Changed two pieces of art because of engineering design changes. CR and Revision 2 November 2002 Changes to include the PFadvantage. 9-29

Ag Leader Technology. Parts List for Combine MF , 8780, White 9700

Ag Leader Technology. Parts List for Combine MF , 8780, White 9700 Parts List for Combine Quantity by Model Note: Indented items indicate parts included W in an assembly listed above 8 8 8 8 H 5 5 5 7 I 6 7 9 8 T Part Name/Description Part No. 0 0 0 0 E Instruction Kit

More information

NOTE: Indented items indicate parts included in an assembly listed above. Early* Late** M3 M3 Part Name/Description Part No.

NOTE: Indented items indicate parts included in an assembly listed above. Early* Late** M3 M3 Part Name/Description Part No. Parts List Gleaner L2, L3, M2, M3 NOTE: Indented items indicate parts included in an Quantity by Model assembly listed above. Early* Late** M3 M3 Part Name/Description Part No. M2 L2 L3 L3 Instruction

More information

Lower Adjuster Small Black Header Sensor Reversed

Lower Adjuster Small Black Header Sensor Reversed Parts List for Combine Quantity by Model Early Late Early Late Note: Indented items indicate parts included M M M M M M in an assembly listed above F F F F F F 7 7 8 8 8 8 5 6 5 5 6 6 Part Name/Description

More information

Flow Sensor Deflector Deflector

Flow Sensor Deflector Deflector Parts List of Combine Kit Note: Indented items indicate parts included Quantity by Model in an assembly listed above Early Models* 9 9 9 4 5 6 0 0 0 Part Name/Description Part No. 0 0 0 Instruction Kit

More information

Flow Sensor Gleaner N5-R Flow Sensor Gleaner R40, R

Flow Sensor Gleaner N5-R Flow Sensor Gleaner R40, R Parts List for Combine Note: Indented items indicate parts included Quantity by Model in an assembly listed above Early Late N N N N N N R R R R R R R Part Name/Description Part No. 5 6 7 5 6 7 5 6 7 40

More information

MF 9690, 9790, Challenger 660, 670

MF 9690, 9790, Challenger 660, 670 Ag Leader Technology Parts List Note: Indented items indicate parts included in an assembly listed above Quantity by Model Part Name/Description Part No. MF 9690 MF 9790 Challenger 660 Challenger 670 Instruction

More information

Part Name/Description Part No

Part Name/Description Part No Parts List for Combine Note: Indented items indicate parts included in an assembly listed above Quantity by Model Part Name/Description Part No. 4425 4435 Instruction Kit JD 4425-4435 2005100-2 1 1 Moisture

More information

Instruction Kit Gleaner K2, K3, F2, F Flow Sensor K2-F

Instruction Kit Gleaner K2, K3, F2, F Flow Sensor K2-F Parts List for Combine NOTE: Indented items indicate parts included In an assembly listed above. Quantity by Model Part Name/Description Part No. K2 F2 Instruction Kit 2005300-1 1 1 Flow Sensor K2-F2 2000292

More information

PFadvantage Metalfor Araus 1360

PFadvantage Metalfor Araus 1360 Metalfor Araus 1360 Note: Indented items indicate parts included in an assembly listed above Part Name/Description Part Number Quantity Instruction Kit Metalfor Araus 2005300-14 1 Display Bracket 4000134

More information

PFadvantage JD 3300/4400/6600/7700; 4420

PFadvantage JD 3300/4400/6600/7700; 4420 Ag Leader Technology Combine Installation JD 33//66/77; 2 Note: Indented items indicate parts included Quantity by Model in an assembly listed above Early Late Part Name/Description Part Number 3 3 6 6

More information

Part Name/Description Part Number Quantity Instruction Kit Metalfor Flow Sensor

Part Name/Description Part Number Quantity Instruction Kit Metalfor Flow Sensor NOTE: Indented items indicate parts included in an assembly listed above Part Name/Description Part Number Quantity Instruction Kit Metalfor 4101091 1 Flow Sensor 4001356 1 Deflector plate 2000612-1 1

More information

PFadvantage MF 6850/6855; Ideal 9080/9090

PFadvantage MF 6850/6855; Ideal 9080/9090 MF 6850/6855; Ideal 9080/9090 Note: Indented items indicate parts included in an Quantity by Model assembly listed above MF Ideal Part Name/Description Part Number 6850 6855 9080 9090 Instruction Kit MF

More information

Flow Sensor

Flow Sensor NOTE: Indented items indicate parts included in an assembly listed above Part Name/Description Part Number Quantity Instruction Kit Metalfor 4101091 1 Quick reference sheet 2002831-36 1 Installation instructions

More information

Rostselmash Torum 740

Rostselmash Torum 740 Note: Indented items indicate parts included in an assembly listed above Quantity by Model Part Name/Description Part Number 740 Combine Kit Torum 740 4100762 1 Threaded Arm Assembly 2000311-2 1 Header

More information

Lexion 570R/575R, 580R/585R, 590R/595R

Lexion 570R/575R, 580R/585R, 590R/595R Note: Indented items indicate parts included in an assembly listed above Quantity by Model 2006+ All Years Part Name/Description Part Number 570R 575R 580R 585R Instruction Kit Lexion 570/580/590 2005500-5

More information

Quantity by Model an assembly listed above Early Models Late Models. Instruction Kit JD 9x00/9x

Quantity by Model an assembly listed above Early Models Late Models. Instruction Kit JD 9x00/9x Note: Indented items indicate parts included in Quantity by Model an assembly listed above Early Models Late Models Part Name/Description Part Number 9400/ 9500/ 9600/ 9400 9500 9600 9410 9510 9610 Instruction

More information

Installation Instructions for John Deere cotton picker models: 9986 & 2-row and All-row systems included.

Installation Instructions for John Deere cotton picker models: 9986 & 2-row and All-row systems included. Ag Leader Technology Cotton Picker Installation Installation Instructions for John Deere cotton picker models: 9986 & 9996 2-row and All-row systems included. IMPORTANT: Ensure the model numbers shown

More information

Installation Instructions for John Deere cotton stripper models:

Installation Instructions for John Deere cotton stripper models: Installation Instructions for John Deere cotton stripper models: 7445 7450 7455 IMPORTANT: Ensure the instructions you use for the installation correspond to the machine model. If you receive the incorrect

More information

MF 9520 / 9540 / 9560, Challenger 540C / 560C

MF 9520 / 9540 / 9560, Challenger 540C / 560C Ag Leader Combine Installation Note: Indented items indicate parts included in an assembly listed above Part Name/Description Part Number 9520 Quantity by Model 9540 540C Parts Kit 2001312-69 1 1 1 Drill

More information

2-row and All-row systems included.

2-row and All-row systems included. Ag Leader Technology Cotton Picker Installation Installation Instructions for John Deere cotton picker models: 2-row and All-row systems included. IMPORTANT: Ensure the model numbers shown above correspond

More information

Instructions for 2-row monitoring only

Instructions for 2-row monitoring only Installation Instructions for CaseIH cotton picker models: Instructions for 2-row monitoring only Ensure the model numbers shown above correspond to the machine model. If you receive the incorrect installation

More information

Installation Instruction for John Deere cotton picker models:

Installation Instruction for John Deere cotton picker models: Cotton Picker Installation Installation Instruction for John Deere cotton picker models: 9900-9950 IMPORTANT: Ensure the instructions you use for the installation correspond to the machine model. If you

More information

Instructions for 2-row monitoring only

Instructions for 2-row monitoring only Installation Instructions for CaseIH cotton picker models: Instructions for 2-row monitoring only CAUTION: Ensure the model numbers shown above correspond to the machine model. If you receive the incorrect

More information

Installation Instructions for John Deere cotton picker model:

Installation Instructions for John Deere cotton picker model: Cotton Picker Parts List Installation Instructions for John Deere cotton picker model: Two row and all row systems included. IMPORTANT: Ensure the instructions you use for the installation correspond to

More information

Installation Instructions for John Deere cotton picker models:

Installation Instructions for John Deere cotton picker models: Cotton Picker Installation Installation Instructions for John Deere cotton picker models: Two row and all row systems included. IMPORTANT: Ensure the instructions you use for the installation correspond

More information

Ag Leader Technology. Combine Installation New Holland TC 57, 59. Monitor Installation

Ag Leader Technology. Combine Installation New Holland TC 57, 59. Monitor Installation Monitor Installation Figure 1. Monitor installed on right side cab window using window mount bracket. 1. If you are in very humid conditions where moisture may condense on the glass where you are mounting

More information

Part Number Part Name/Description Instruction Kit JD 9x50/9x60/9x Flow Sensor

Part Number Part Name/Description Instruction Kit JD 9x50/9x60/9x Flow Sensor ATTENTION If installing combine kit on a 9x70 series combine with factory-installed yield/moisture sensors, please take note of the special instructions in the Operational Checkout section (page 41) for

More information

Part Name/Description Part No. PF3000 PF 3000 Pro U-Bracket Short Bracket PF3000 Pro

Part Name/Description Part No. PF3000 PF 3000 Pro U-Bracket Short Bracket PF3000 Pro Note: Indented items indicate parts included in an assembly listed above Part Name/Description Part No. PF3000 PF 3000 Pro U-Bracket Short 2000105-2 1 PFadvantage Bracket PF3000 Pro 2000773 1 Cable Kit

More information

LGT-306L / LB Club Car Precedent LED Light Bar Bumper Kit Installation Instructions

LGT-306L / LB Club Car Precedent LED Light Bar Bumper Kit Installation Instructions LGT-306L / LB Club Car Precedent LED Light Bar Bumper Kit Installation Instructions Caution: Please read through the instructions carefully. Before starting this project, remove the system s positive and

More information

Clutch Control. PN: November 2013 Rev E 1

Clutch Control. PN: November 2013 Rev E 1 NOTE: Indented items indicate parts included in an assembly listed above Part Name/Description Part Number Quantity Module Kit 4100533 1 Cable Installation Kit 2000901-1 1 Alcohol swab packet 2002811 2

More information

Z-Gate Universal Shifter

Z-Gate Universal Shifter Installation Instructions Z-Gate Universal Shifter Fits: GM, Ford, Lincoln and Chrysler Transmissions See Application Guide for Specific Applications Part #80681 Rev 06/01/2018 WORK SAFELY! For maximum

More information

Installation Instructions Z-Gate Shifter

Installation Instructions Z-Gate Shifter Installation Instructions Z-Gate Shifter Part Number 80681 1998, 2001 by B&M Racing and Performance Products The B&M Z-Gate shifter can be used in vehicles equipped with most popular three speed automatic

More information

JODALE PERRY. Parts List & Mounting Instructions. Jacobsen HR9016 JDP BUILT FOR LIFE

JODALE PERRY. Parts List & Mounting Instructions. Jacobsen HR9016 JDP BUILT FOR LIFE JODALE PERRY Parts List & Mounting Instructions Jacobsen HR9016 JDP BUILT FOR LIFE Jacobsen HR9016 Mounting Instructions Standard Parts 1 - LH Rear Mounting Bracket 1 - RH Rear Mounting Bracket 1 - Front

More information

LGT-311L Bumper LED Light Kit EZ-Go RXV Installation Instructions

LGT-311L Bumper LED Light Kit EZ-Go RXV Installation Instructions LGT-311L Bumper LED Light Kit EZ-Go RXV Installation Instructions Caution: Please read through the instructions carefully. Before starting this project, remove the system s positive and negative connections

More information

Ford C4 and C6 Floor Mount Automatic Transmission Shifter Installation Instructions

Ford C4 and C6 Floor Mount Automatic Transmission Shifter Installation Instructions Ford C4 and C6 Mount Automatic Transmission Shifter Installation Instructions Building American Quality With A Lifetime Warranty! TOLL FREE 1-877-469-7440 tech@lokar.com www.lokar.com Ford C4 and C6 Mount

More information

Chrysler 727, 904, 518 Floor Mount Automatic Transmission Shifter Installation Instructions

Chrysler 727, 904, 518 Floor Mount Automatic Transmission Shifter Installation Instructions Chrysler 727, 904, 518 Mount Automatic Transmission Shifter Installation Instructions Building American Quality With A Lifetime Warranty! TOLL FREE 1-877-469-7440 tech@lokar.com www.lokar.com Release Button

More information

Clutch Installation Case IH 1200 row unit

Clutch Installation Case IH 1200 row unit Ag Leader Technology SeedCommand NOTE: Indented items indicate parts included in an assembly listed above Part Name/Description Part Number Quantity 4 row clutch installation kit Case IH 1200 Model year

More information

Powerglide Automatic Floor Mount Shifter Installation Instructions

Powerglide Automatic Floor Mount Shifter Installation Instructions Powerglide Automatic Mount Installation Instructions Building American Quality With A Lifetime Warranty! TOLL FREE 1-877-469-7440 (865) 966-2269 FAX (865) 671-1999 tech@lokar.com www.lokar.com Powerglide

More information

GPS AutoSteer System Installation Manual

GPS AutoSteer System Installation Manual GPS AutoSteer System Installation Manual Supported Vehicles MacDon M150 M200 PN: 602-0232-01-A LEGAL DISCLAIMER Note: Read and follow ALL instructions in this manual carefully before installing or operating

More information

Ford AOD-4R70W-AODE Cable Operated Shifter Installation Instructions

Ford AOD-4R70W-AODE Cable Operated Shifter Installation Instructions Ford AOD-4R70W-AODE Cable Operated Shifter Installation Instructions Building American Quality With A Lifetime Warranty! TOLL FREE 1-877-469-7440 tech@lokar.com www.lokar.com Ford AOD-4R70W-AODE Cable

More information

Turn Signal / Horn Kit PN 7101 by All years Polaris RZR 1000 and RZR 900, 900-4, 900 trail, 900S and 900XC STOP - THIS KIT IS DESIGNED

Turn Signal / Horn Kit PN 7101 by All years Polaris RZR 1000 and RZR 900, 900-4, 900 trail, 900S and 900XC STOP - THIS KIT IS DESIGNED All years Polaris RZR 1000 and 1000-4 2015 RZR 900, 900-4, 900 trail, 900S and 900XC STOP - THIS KIT IS DESIGNED SPECIFICALLY FOR ALL YEAR AND MODEL POLARIS RZR 1000 AND 1000-4. ALSO THE 2015 POLARIS RZR

More information

2016 HONDA 1000 Pioneer PN 3102 Turn signal / horn kit rev nc

2016 HONDA 1000 Pioneer PN 3102 Turn signal / horn kit rev nc 2016 Honda 1000 Pioneer STOP - THIS KIT IS DESIGNED SPECIFICALLY FOR 2016 HONDA 1000 PIONEER IF YOUR MACHINE IS NOT THIS MODEL DO NOT PROCEED. THIS KIT DOES NOT WORK ON THE PIONEER 500 nor 700 S. Contact

More information

Universal Super Shield & Ultimate Aluminum w/electric Drive Conversion Kits , , Installation Instructions

Universal Super Shield & Ultimate Aluminum w/electric Drive Conversion Kits , , Installation Instructions WLH 09/19/16 111-0215 & 112-0215 607-0026 For technical support call us at (800) 368-3075 or visit our website at PullTarps.com. TABLE OF CONTENTS ***Assembly*** Conversion Kit-Universal Super Shield ***Wiring,

More information

Installation Guide CLAAS Lexion Combines with 9 inch Elevators

Installation Guide CLAAS Lexion Combines with 9 inch Elevators Installation Guide CLAAS Lexion Combines with 9 inch Elevators 955614_01 4/17 1 Table of Contents System Overview 3 Quick Start Guide 4 Flow Sensor Installation 5 Hydraulic Elevator Adjustment Kit Installation

More information

MODEL P Parts List UNIT SERIAL NUMBER MANUAL NUMBER: AB-F EFFECTIVE 06/2016

MODEL P Parts List UNIT SERIAL NUMBER MANUAL NUMBER: AB-F EFFECTIVE 06/2016 Parts List UNIT SERIAL NUMBER MANUAL NUMBER: EFFECTIVE 06/2016 1330 76TH AVE SW CEDAR RAPIDS, IA 52404-7052 PHONE (319) 363-8281 FAX (319) 286-3350 www.highwayequipment.com Copyright 2007 Highway Equipment

More information

Champion Series Zero-Turn Riders & Mower Decks

Champion Series Zero-Turn Riders & Mower Decks Parts Manual Champion Series Zero-Turn Riders & Mower Decks HP Tractors Mfg. No. Description Champion, HP Zero-Turn Rider Champion, HP Zero-Turn Rider (CE) 0HP Tractors Mfg. No. Description Champion, 0HP

More information

RAM Rail Mount Kit RAM 201UD 5 Arm RAM 2461U Base RAM 235U Base, Double U-Bolt

RAM Rail Mount Kit RAM 201UD 5 Arm RAM 2461U Base RAM 235U Base, Double U-Bolt Note: Indented items indicate parts included in an assembly listed above. Part Name/Description Part Number Quantity Direct Command Kit 4100514 1 Installation Instructions 2005690 1 CAN Y-Splice 4000137

More information

LGT-312L E-Z-Go TXT Light Bar Bumper Kit Installation Instructions

LGT-312L E-Z-Go TXT Light Bar Bumper Kit Installation Instructions LGT-312L E-Z-Go TXT 2014+ Light Bar Bumper Kit Installation Instructions Caution: Please read through the instructions carefully. Before starting this project, remove the system s positive and negative

More information

GM Floor Mount Automatic Transmission Shifter Installation Instructions

GM Floor Mount Automatic Transmission Shifter Installation Instructions GM Mount Automatic Transmission Shifter Installation Instructions Building American Quality With A Lifetime Warranty! TOLL FREE 1-877-469-7440 tech@lokar.com www.lokar.com GM Mount Automatic Transmission

More information

Installation Instructions Models 2858, 2858A-1, 2858GL February 2009

Installation Instructions Models 2858, 2858A-1, 2858GL February 2009 Installation Instructions Models 2858, 2858A-1, 2858GL February 2009 www.donovan-ent.com Donovan Enterprises 3353 SE Gran Park Way Stuart, FL 34997 800-327-8287 Step 1 Head Assembly Installation Instructions

More information

Ford AOD-4R70W-AODE Cable Operated Shifter Installation Instructions

Ford AOD-4R70W-AODE Cable Operated Shifter Installation Instructions Ford AOD-4R70W-AODE Cable Operated Shifter Installation Instructions Building American Quality With A Lifetime Warranty! TOLL FREE 1-877-469-7440 tech@lokar.com www.lokar.com Ford AOD-4R70W-AODE Cable

More information

2005+ Roll Bar (Mm5RB-20.1 to -20.6) Recommended Center punch 1/8" pilot drill 1-3/4" Hole saw 2" Hole saw

2005+ Roll Bar (Mm5RB-20.1 to -20.6) Recommended Center punch 1/8 pilot drill 1-3/4 Hole saw 2 Hole saw 3430 Sacramento Dr., Unit D San Luis Obispo, CA 93401 Telephone: 805/544-8748 Fax: 805/544-8645 www.maximummotorsports.com 2005+ Roll Bar (Mm5RB-20.1 to -20.6) Recommended Center punch 1/8" pilot drill

More information

OUT FRONT ELECTRIC HYDRAULIC (W/E-47H) FOR STRAIGHT TRIPEDGE PLOWS (PULL AWAY MOUNTINGS)

OUT FRONT ELECTRIC HYDRAULIC (W/E-47H) FOR STRAIGHT TRIPEDGE PLOWS (PULL AWAY MOUNTINGS) 80052 March 6, 1995 OUT FRONT ELECTRIC HYDRAULIC (W/E-47H) FOR STRAIGHT TRIPEDGE PLOWS (PULL AWAY MOUNTINGS) ITEM STOCK DESCRIPTION QTY. 51 15759 LIFT UNIT (E-47H) 1 52 817000 020 10" CYLINDER 2 53 15370

More information

Wolverine Turn Signal / Horn Kit 2102

Wolverine Turn Signal / Horn Kit 2102 All years Yamaha Wolverine STOP - THIS KIT IS DESIGNED SPECIFICALLY FOR ALL YEAR AND MODELS YAMAHA WOLVERINE. IF YOUR MACHINE IS NOT ONE OF THESE MODELS DO NOT PROCEED. Contact Ryco Motorsports or your

More information

Installation instructions, accessories - Rear Seat Entertainment

Installation instructions, accessories - Rear Seat Entertainment XC90 Section Group Weight(Kg/Pounds) Year Month 3 39 2004 10 XC90 2003, XC90 2004, XC90 2005, XC90 2006, XC90 2007, XC90 2008 Replaces issue: 2003 12 J3904620 Page 1 of 18 Required tools A0000162 A0000163

More information

Patriot. Aluminum and Steel 5spring. Step #1 Tarp Spool with Gear Motor (Includes Instructions for Optional Wind Deflector)

Patriot. Aluminum and Steel 5spring. Step #1 Tarp Spool with Gear Motor (Includes Instructions for Optional Wind Deflector) Aluminum and Steel 5spring Qty. Component Parts Description: LONG BOX: (1) 103 Aluminum Tarp Axle (2) 98 Upper Arms with 90 Degree Elbow (2) Lower Aluminum ( 84 ) (1) Aluminum Cross Tube SMALL HARDWARE

More information

PRO RATCHET UNIVERSAL SHIFTER

PRO RATCHET UNIVERSAL SHIFTER Installation Instructions PRO RATCHET UNIVERSAL SHIFTER Fits: GM, Ford and Chryslers w/automatic Transmission See Application Guide for Specific Vehicles Catalog # 80842 WORK SAFELY! For maximum safety,

More information

Detroit Speed, Inc. Selecta-Speed Wiper Kit Mustang P/N:

Detroit Speed, Inc. Selecta-Speed Wiper Kit Mustang P/N: Detroit Speed, Inc. Selecta-Speed Wiper Kit 1967-68 Mustang P/N: 121651 A downpour of rain will no longer hinder your ability to clearly see the road. The Detroit Speed Inc. Selecta-Speed Wiper Kit provides

More information

Installation Instructions. QuickSilver Shifter. Fits: GM, Ford, Chrysler Transmissions See Application Guide for Specific Applications Part # 80683

Installation Instructions. QuickSilver Shifter. Fits: GM, Ford, Chrysler Transmissions See Application Guide for Specific Applications Part # 80683 Installation Instructions QuickSilver Shifter Fits: GM, Ford, Chrysler Transmissions See Application Guide for Specific Applications Part # 80683 WORK SAFELY! For maximum safety, perform this installation

More information

C15C C15C. Page 1 of 20

C15C C15C. Page 1 of 20 2 x Lid Front Hinge 1135 8 x M8 Bolt 8 x M8 Washer (3mm Thick) 4 x M6 Large washers 4 x M6 Spring washers 4 x M6 x 40mm Bolts 6 x M6 20mm Bolts 6 x M6 Washers 20 x Screws 2 x Lid mount gas strut bracket

More information

Installation Items: Cruise Module

Installation Items: Cruise Module Installation Items: Rostra 250-1223, Electronic Cruise Control System (ECCS) includes the cruise module, harness, cruise cable, cruise module mounting bracket, cruise cable mounting bracket and hardware

More information

Ag Leader Technology InSight/Ag Leader Integra. OptRx OptRx Remote Sensor Kit

Ag Leader Technology InSight/Ag Leader Integra. OptRx OptRx Remote Sensor Kit : Indented items indicate parts included in an assembly listed above Part Name/Description Part Number Quantity Master Module Kit 4100804 1 Master Module 4001821 1 Cable - Master 4001904-10 1 Cable - CAN

More information

INSTALLATION INSTRUCTIONS 97 FORD EXPEDITION

INSTALLATION INSTRUCTIONS 97 FORD EXPEDITION INSTALLATION INSTRUCTIONS 97 FORD EXPEDITION 1. Read the instructions completely and carefully before you begin. Check the kit for proper contents (refer to the part s list and the picture diagrams). Before

More information

WPS-104 Heater Installation Instructions For 500EFI, 700 XP, & Crew Applications

WPS-104 Heater Installation Instructions For 500EFI, 700 XP, & Crew Applications WPS-104 Heater Installation Instructions For 500EFI, 700 XP, & Crew Applications ORDER OF INSTALLATION FOR A COMPLETE ENCLOSURE OF A RANGERWARE WPS (Weather Protection System) IS AS FOLLOWS: 1. Heater

More information

General Information. Notations and Conventions. Compatibility Check. Kit Description. Call-Outs. Part Lists Great Plains Manufacturing, Inc.

General Information. Notations and Conventions. Compatibility Check. Kit Description. Call-Outs. Part Lists Great Plains Manufacturing, Inc. Part Lists Great Plains Manufacturing, Inc. 1 Installation Instructions Loup Shaft Monitor Used with Drill models: Compatible with most 1995 and later, two- and three-box drills with 5 8 -inch square main

More information

72B27LD PARTS MANUAL

72B27LD PARTS MANUAL 7 2 B 2 7 L D PARTS MANUAL 6 MID-CUT SECTION 6 MID-CUT DECK ASSEMBLY 25 24 23 26 22 00 20 9B SEE NOTE A 9A 75 34 6 2 87 98 05 03 2 90 2 68 53 93 02 69 5 49 5 7 8 0 0 9 36 88 8 58 97 3 46 59 3 72 92 76

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS Accessory Application Publication No. INSTALLATION INSTRUCTIONS WINCH MOUNT KIT P/N 08L77-HL3-A00 SXS700M4/M2 Honda Dealer: Please give a copy of these instructions to your customer. MII 14607 Issue Date

More information

Front seats. j a t CAUTION! Before beginning repairs on the electrical system: Obtain the anti-theft radio security code. Switch the ignition off.

Front seats. j a t CAUTION! Before beginning repairs on the electrical system: Obtain the anti-theft radio security code. Switch the ignition off. j a t Front seats 72-1 CAUTION! Before beginning repairs on the electrical system: Obtain the anti-theft radio security code. Switch the ignition off. Search Advanced Search Disconnect the battery Ground

More information

Parts Manual DX272 / Please read the operator s manual carefully and make sure you understand the instructions before using the machine.

Parts Manual DX272 / Please read the operator s manual carefully and make sure you understand the instructions before using the machine. Parts Manual DX22 / 966651501 Please read the operator s manual carefully and make sure you understand the instructions before using the machine. Gasoline containing up to 10% ethanol (E10) is acceptable

More information

72K850ZP PARTS MANUAL

72K850ZP PARTS MANUAL 7 2 K 8 5 0 Z P PARTS MANUAL 72 MID-CUT GAS ENGINE OPTION SECTION 72 MID-CUT DECK ASSEMBLY 72" Mid-Cut Deck Assembly # PART NO. QTY DESCRIPTION 1 582096 1 72" MC DECK WELDMENT 2 582098 1 72" DECK CHANNEL

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS 28 INSTALLATION INSTRUCTIONS SECTION - AIR SPRING SECTION 2 - AIR ACCESSORY 2-5 ! IMPORTANT PLEASE DON T HURT YOURSELF, YOUR KIT OR YOUR VEHICLE. TAKE A MINUTE TO READ THIS IMPORTANT INFORMATION. This

More information

Installation Instructions for Lingenfelter GM 2500 Suburban & Yukon XL Auxiliary Fan System (with ECM controlled fan output)

Installation Instructions for Lingenfelter GM 2500 Suburban & Yukon XL Auxiliary Fan System (with ECM controlled fan output) Installation Instructions for Lingenfelter 2007-2013 GM 2500 Suburban & Yukon XL Auxiliary Fan System (with ECM controlled fan output) PN L300090607 Revision - 1.1 Lingenfelter Performance Engineering

More information

Installation Instructions Unimatic Shifter

Installation Instructions Unimatic Shifter Installation Instructions Unimatic Shifter Universal Shifter for Automatic Transmissions Part Number 80775 2000 by B&M Racing & Performance Products LLC The B&M Unimatic is a universal shifter that will

More information

Procharger Stage II Intercooled Supercharger System (11-14 GT)

Procharger Stage II Intercooled Supercharger System (11-14 GT) Procharger Stage II Intercooled Supercharger System (11-14 GT) Installation Time: Approximately one day. Installed on 2012 Mustang GT 5.0/Manual Required Tools 3/8 Socket Set (Standard and Metric) 1/2

More information

INSTALLATION GUIDE P1000 PRO-CELL CURRENT FORD POLICE UTILITY INTERCEPTOR. pro-gard.com STRONG RELIABLE SECURE

INSTALLATION GUIDE P1000 PRO-CELL CURRENT FORD POLICE UTILITY INTERCEPTOR. pro-gard.com STRONG RELIABLE SECURE INSTALLATION GUIDE P1000 PRO-CELL 2013 - CURRENT FORD POLICE UTILITY INTERCEPTOR STRONG RELIABLE SECURE THESE COMPONENTS ARE REQUIRED TO INSTALL THE PRO-GARD PARTITION SYSTEM WB4711-01D WB4711-01P 4K47UINTPRO

More information

PRODUCT SAFETY NOTICE

PRODUCT SAFETY NOTICE PRODUCT SAFETY NOTICE Congratulations. This vehicle has been equipped with a Firestone air suspension system. This suspension will enhance the vehicle s handling when loaded, however, the vehicle s performance

More information

INSTALLATION GUIDE P1000 PRO-CELL CURRENT FORD POLICE UTILITY INTERCEPTOR. pro-gard.com STRONG RELIABLE SECURE

INSTALLATION GUIDE P1000 PRO-CELL CURRENT FORD POLICE UTILITY INTERCEPTOR. pro-gard.com STRONG RELIABLE SECURE INSTALLATION GUIDE P1000 PRO-CELL 2013 - CURRENT FORD POLICE UTILITY INTERCEPTOR STRONG RELIABLE SECURE THESE COMPONENTS ARE REQUIRED TO INSTALL THE PRO-GARD PARTITION SYSTEM WB4711-01D WB4711-01P 4K47UINTPRO

More information

34 DECK ASSEMBLY A. SEE THE DECAL LIST SECTION FOR ALL DECALS /8 STD. FLAT WASHER TENSIONER w/ BUSHING

34 DECK ASSEMBLY A. SEE THE DECAL LIST SECTION FOR ALL DECALS /8 STD. FLAT WASHER TENSIONER w/ BUSHING 3 4 B 1 8 Z PARTS MANUAL 20 21 21 24 24 25 25 26 26 33 34 41 38 39 51 38 37 72 36 43 47 48 44 60 80 35 33 40 50 42 34 30 65 32 66 59 58 57 58 59 18 52 29 49 83 83 17 17 6 7 9 79 50 50 63 72 72 80 64 64

More information

Revised 10/23/2015 Page 2 of 10

Revised 10/23/2015 Page 2 of 10 1.Remove the gauge, side panels, hood and headlight. Remove the air box from the throttle bodies then remove the seat and gas tank. 2.Carefully remove temp sensor from air box using a small pick or screw

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS Rear Vision System Tailgate Emblem Camera Mirror Display 2009-Current Ford F-150 and 2010-Current Super Duty (Kit part number 1008-9527) Kit Contents: Mirror Tailgate Emblem Mount with Camera Interior

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS Accessory REMOTE ENGINE STARTER SYSTEM Application 2010 CIVIC 4-DOOR Publications No. AII 42460 Issue Date AUG 2009 PARTS LIST Remote Engine Starter Unit Kit P/N 08E91-E22-100B

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS Thank you for purchasing ROLTECTM Electric Hopper Conversion. Agri-Cover, Inc. proudly manufactured this hardware using superior quality materials and workmanship. With proper

More information

Table of Contents QUICK REFERENCE GUIDE FOR 52B25X...A - 1 DECK COMPONENTS...B - 1 DECK LIFT COMPONENTS... C - 1 FRAME COMPONENTS...

Table of Contents QUICK REFERENCE GUIDE FOR 52B25X...A - 1 DECK COMPONENTS...B - 1 DECK LIFT COMPONENTS... C - 1 FRAME COMPONENTS... B X PARTS MANUAL Table of Contents QUICK REFERENCE GUIDE FOR BX...A - DECK COMPONENTS...B - DECK LIFT COMPONENTS... C - FRAME COMPONENTS... D - DRIVE COMPONENTS...E - CONTROL COMPONENTS LINKAGE PARTS...F

More information

Parts Manual Rev. B RZT48 /

Parts Manual Rev. B RZT48 / 115 91 36-2 Rev. B Parts Manual RZT48 / 96 62001-00 Please read the operator manual carefully and make sure you understand the instructions before using the machine. Gasoline containing a maximum of 10%

More information

25 Horsepower Hydrostatic Zero-Turn Commercial Riding Mower

25 Horsepower Hydrostatic Zero-Turn Commercial Riding Mower MMZ 2, 260 2 Horsepower Hydrostatic Zero-Turn Commercial Riding Mower ILLUSTRATED PARTS LIST " Float Cutter Deck - Figure 1 3 1 27 32 17 6 1 11 31 36 3 19 7 23 1 33 38 18 37 22 3 20 2 10 2 12 21 30 39

More information

General Information. Veris Drive Option

General Information. Veris Drive Option No-Till and No-Till Precision Seeding System Used with: 3N-3010P and 3N-3020P 3N-3010 and 3N-3020! When you see this symbol, the subsequent instructions and warnings are serious - follow without exception.

More information

Repair Parts Manual For: SR-125. Zero Turn Radius Mower P (4/11)

Repair Parts Manual For: SR-125. Zero Turn Radius Mower P (4/11) Repair Parts Manual For: SR-125 Zero Turn Radius Mower P-12763 (4/11) COUNTRY CLIPPER WRANGLER - SR125 ZERO TURN RADIUS MOWER TABLE OF CONTENTS MOWER DECK... SPINDLE ASSEMBLY... RUBBER CHUTE ASSEMBLY...

More information

Table of Contents QUICK REFERENCE GUIDE FOR 48K19X...A - 1 DECK COMPONENTS...B - 1 DECK LIFT COMPONENTS... C - 1 FRAME COMPONENTS...

Table of Contents QUICK REFERENCE GUIDE FOR 48K19X...A - 1 DECK COMPONENTS...B - 1 DECK LIFT COMPONENTS... C - 1 FRAME COMPONENTS... 4 8 K 9 X PARTS MANUAL Table of Contents QUICK REFERENCE GUIDE FOR 48K9X...A - DECK COMPONENTS...B - DECK LIFT COMPONENTS... C - FRAME COMPONENTS... D - DRIVE COMPONENTS...E - CONTROL COMPONENTS LINKAGE

More information

Section 13. Tail Rotor Drive. RotorWay International A600 TALON Construction Manual. Section 13. Page A

Section 13. Tail Rotor Drive. RotorWay International A600 TALON Construction Manual. Section 13. Page A RotorWay International Page A Tail Rotor Drive Procedures covered in this section: Install driveshafts and gearboxes; install drive belt and tensioner; fabricate and install tail rotor pitch actuator arms;

More information

Table of Contents QUICK REFERENCE GUIDE FOR 60K25X...A - 1 DECK COMPONENTS...B - 1 DECK LIFT COMPONENTS... C - 1 FRAME COMPONENTS...

Table of Contents QUICK REFERENCE GUIDE FOR 60K25X...A - 1 DECK COMPONENTS...B - 1 DECK LIFT COMPONENTS... C - 1 FRAME COMPONENTS... 0 K X PARTS MANUAL Table of Contents QUICK REFERENCE GUIDE FOR 0KX...A - DECK COMPONENTS...B - DECK LIFT COMPONENTS... C - FRAME COMPONENTS... D - DRIVE COMPONENTS...E - CONTROL COMPONENTS LINKAGE PARTS...F

More information

NOTE: Skids, springs, center section, and hardware are located in the push tube box.

NOTE: Skids, springs, center section, and hardware are located in the push tube box. 72 HYDRAULIC V-PLOW MOUNTING INSTRUCTIONS BLADE P/N: 4501-0190 PUSH TUBE ASSM P/N: 4501-0191 CUSTOMER MUST RECEIVE A COPY OF THIS INSTRUCTION SHEET AT THE TIME OF SALE NOTE: Skids, springs, center section,

More information

OIL COOLER KIT INSTALLATION INSTRUCTIONS PART NUMBER D

OIL COOLER KIT INSTALLATION INSTRUCTIONS PART NUMBER D OIL COOLER KIT INSTALLATION INSTRUCTIONS PART NUMBER D570-0904 APPLICATION: 2011-2012 E90 335i/xi (N55 engine) with BMW standard bumper and with stock oil cooler Congratulations for being selective enough

More information

Page 1. File: Motolight caliper one-piece Date: 8/14/2006

Page 1. File: Motolight caliper one-piece Date: 8/14/2006 Page 1 Caliper Mount Installation One-piece mounting brackets You should allow about two to three hours for installation. We suggest you use a well-lighted space for installation. PLEASE READ ALL THE INSTRUCTIONS.

More information

Technical Support (707)

Technical Support (707) Installation Instructions CONSOLE MEGASHIFTER Fits: 1982-1992 Camaro & Firebird w/automatic Transmission *except 1988-1992 Firebird Formula Model Catalog # 80692 WORK SAFELY! For maximum safety, perform

More information

SLIDE DOOR OPERATOR ADDENDUM

SLIDE DOOR OPERATOR ADDENDUM SLIDE DOOR OPERATOR MODELS SD & GSD ADDENDUM 2 YEAR W ARRANTY Serial # (located on electrical box cover) NOT FOR RESIDENTIAL USE 1B6 Installation Date Wiring Type LISTED DOOR OPERATOR SPECIFICATIONS Adjustable

More information

MODEL SUPER P Parts List

MODEL SUPER P Parts List MODEL Parts List UNIT SERIAL NUMBER MANUAL NUMBER: EFFECTIVE 05/2016 1330 76TH AVE SW CEDAR RAPIDS, IA 52404-7052 PHONE (319) 363-8281 FAX (319) 286-3350 www.highwayequipment.com Copyright 2007 Highway

More information

TRX-26 Trencher. Model No Serial No and Up * * B. Register at Original Instructions (EN)

TRX-26 Trencher. Model No Serial No and Up * * B. Register at   Original Instructions (EN) Form No. 3414-278 Rev B TRX-26 Trencher Model No. 22974 Serial No. 400000000 and Up Register at www.toro.com. Original Instructions (EN) *3414-278* B Ordering Replacement Parts To order replacement parts,

More information

PRODUCT USE INFORMATION

PRODUCT USE INFORMATION 9RC61000 Jeep YJ Body Lift Thank you for choosing Rough Country for all your suspension needs. This body lift fits both manual and Automatic equipped vehicles!!! Refer to last page of this Instruction

More information

BX88175 Installation Instructions ToadStop II Vacuum Brake System

BX88175 Installation Instructions ToadStop II Vacuum Brake System BX88175 Installation Instructions ToadStop II Vacuum Brake System Serial No. Customer supplied tools & supplies Utility knife, 12VDC tester, drill & bits: (1/8", 1/4", 5/8 ), ¼ socket drive bit, punch,

More information