FD75 FlexDraper Product Training
|
|
- Chloe Potter
- 6 years ago
- Views:
Transcription
1
2 Overview MacDon continues to raise the bar in draper technologies. The new 5 Series product line features improvements and innovations that translate into real world harvesting results.
3 New Product for 2013 The new MacDon FD75 FlexDraper replaces the FD70 FlexDraper header and CA25 replaces CA20 models for PRODUCT HIGHLIGHTS: Available in sizes for combine application Improved Flex linkage 2 per truck shipping configuration Straight reel arms for improved reel slope Improved hydraulics with knife reverser and better draper speed control as standard equipment Better sealing of adapter to improve crop retention New Auto Header Height and Hydraulic CenterLink
4 Auger Mounting New left hand, right hand feed auger mounts on CA25 (Castings) Fewer parts to simplify auger mounting Allows easier auger removal for servicing
5 Seed Saver Seed saver parts now standard on CA25 Improved sealing means more of your seed is saved while still retaining front rock sump area Front rock sump and poly pan area feature improved sealing. Top Bottom
6 Trim Springs Replaced with Rockers Simplified design for improved performance Easier to remove and install CA25 Fewer parts and components Improved header performance as adjustments are no longer needed
7 Feed Auger Springs Improved feed auger springs on CA25 Provides positive drum hold down for improved feeding Higher initial tension means crop is better compressed before it enters the feeder house Easier assembly (Doesn t require initial stretching of spring)
8 Float/Tilt Indicator New simplified design Improved operator clarity by mounting tilt indicator directly on cylinder Fewer parts and simpler design means easier to service and less chaff build up New design allows for factory installation
9 CentreLink Rear anchor pivot moved forward Common hydraulic CentreLink fits all combines No change to the current optimal header angles
10 CA25 Hydraulics New hydraulic valve block and filter Knife reverser standard Improved side draper speed dial with position indicator Easier to service with fewer fittings and connection points CA25 New o-ring seal replaces square cut seal on filter improves seal CA20
11 Draper Motor A common 4 bolt standard flange motor replaces round edge flange motor BENEFIT: Needle bearing motor replaced with journal bearing motor which provides improved seal life FD75 FD70
12 Draper Tension Increased Side draper tension increased by 33% Improves drive to drapers for handling the heaviest of crop loads Components strengthened to allow for tension increase
13 Full Length Draper Guides New longer draper guide spans multiple header legs Increased draper life with additional support of the draper on the bottom side of the draper deck Added space improves dirt rejection and allows dirt to escape from the bottom of the C-shaped cutter bar
14 Additional Deck Support Added An additional deck support has been added to all FlexDrapers BENEFIT: Provides better deck support and ensures an excellent draper to cutterbar seal
15 Back Sheets One piece back sheets Fewer parts simplify and improve aesthetics Common design for all configurations and sizes
16 Hinged Deck Hinge added to FD75 draper deck Improves durability of draper deck Extends life of side drapers FD75 FD70
17 Dividers Quick Latch System removed on Dividers (This feature is not required by all customers) Divider cones are now securely bolted to header end panel Same Divider system for all configurations FD75 Optional latch kit available for quick removal of dividers for reduced transport width FD70
18 New Reel Arm Design Straight reel arms Increased side to side stability in extreme terrain Improves relationship of the reel finger to cutter bar for all header sizes (Ensures optimal positioning of reel fingers throughout the entire range of the reel fore-aft position) FD75 FD70
19 End Shields Restyled end shields Updated 5 Series styling Secure mounting Swing out shields (left and right hand) Redesigned slot style latching for easy operation Shields shipped installed
20 Reel End Shields Redesigned reel end shield shape and mounting Improves performance with less carry-over Increased clearance between reel and header end sheets for improved crop flow Common parts for left and right side of reel
21 Steel Fingered Reel Option A configuration of 30 and 35 FD75 now available with steel reel fingers BENEFIT: Steel reel fingers maximize durability in rice applications
22 Parker Hydraulic Components Beginning with the 2013 model year, we are standardizing the hydraulic lines on all MacDon products. All hydraulic hoses, couplers and fittings will be supplied by Parker.
23 Cast Bell Cranks Weldment replaced with castings BENEFIT: Casting is stronger and more durable FD75 FD70
24 Compression Link Ball Joints Rubber bushings replaced with Teflon lined ball joints Increased durability Common part for all FD75
25 Skid Shoes Removed on FD75 Skid shoes are now optional on FD75 In most conditions operating without skid shoes reduces dirt ingestion into the draper and cutter bar Allows for lower cut height enabling a close shave to the ground while running a shallow guard angle Decreases surface area friction resulting in better performance in wet conditions 68mm 11 o Shallow Guard Angle - With Shoes 51mm 11 o Shallow Guard Angle - No Shoes 47mm 13.8 o Middle Range Guard Angle - With Shoes 41mm 13.8 o Middle Range Guard Angle - No Shoes
26 Reel Function Hydraulics Plumbing relocated to Rear draper deck Ease of service Securely mounted
27 Compression Molded Skid Shoes New compression molded skid shoes for inboard legs (Optional on FD75 models) Increased durability over current skid shoe design Easier to replace FD75 FD70
28 Knife Storage Spare Knife Storage for 40 and 45 double knife units Spare knife storage is now provided on 40 and 45 double knife headers A full length spare knife can now be shipped from the factory when ordered with the header
29 Shipping New simplified design Straight forward bolt on components Ships 2 per truck Minimal additional setup
30 FD75 Video See the MacDon FD75 FlexDraper in action!
31 Thank You
Draper Headers for Combine
Draper Headers for Combine DRAPER HEADERS FOR COMBINE D1 & FD1 Series Draper Header Performance 2 MacDon Draper Headers for Combine FM100 Float Module The next level of incredible draper performance Most
More informationD1 & FD1 Combine Headers
D1 & FD1 Combine Headers INTRODUCTION Harvesting performance. MacDon is a world leader in technology, innovation, and manufacturing of high-performance harvesting equipment. Our products are distributed
More informationDraper Clinic Handout. FD1 FlexDraper
Draper Clinic Handout FD1 FlexDraper Table of Contents Flex vs Float.... 3 Break In Service 5 minutes.... 4 Break In Service 5 hours.... 4 Break In Service 10 hours.... 5 Break In Service 50 hours... 6
More informationGRAIN platform KITS. grain platform kits & 2020 Header adapter kits. 4 harvesting product support
GRAIN platform KITS GRAIN HEADER COMPLETING KITS 2010 & 2020 Header adapter kits Application: 2100/2300 Series Combines conversion kits Includes: Weldment and mounting hardware for header frame only 87362290:
More informationModel 973 COMBINE HEADER Model 974 FLEX DRAPER COMBINE HEADER
Model 973 COMBINE HEADER Model 974 FLEX DRAPER COMBINE HEADER PARTS CATALOG Form 147086 Issue 01/07 Sugg. Retail: $15.00 Inside Front Cover (blank) Model 973/974 Header PARTS CATALOG 1 CONTENTS Main Frame,
More informationD1 & FD1 Combine Headers
D1 & FD1 Combine Headers INTRODUCTION Harvesting Performance For nearly 70 years MacDon has been a world leader in technology, innovation, and manufacturing of high-performance harvesting equipment. Our
More informationPW8 Pick-Up Header Features & Benefits
PW8 Pick-Up Header Features & Benefits Overview Heavy Duty Draper Tracking System MacDon's patented V-Guide roller groove tracking system provides reliable, maintenance free draper tracking. Our four draper
More informationCA20 Combine Adapter. PARTS CATALOG $15 Part # Rev. E $15
CA20 Combine Adapter PARTS CATALOG $15 Part #169011 Rev. E $15 MacDon Model CA20 Combine Adapter Model CA20 Combine Adapter PARTS CATALOG 1 CONTENTS PAGE Base Adapter Frame & Components... 4, 5 Feed Deck
More informationPerformance has a name.
PULL-TYPES FOR HAY R SERIES ROTARY DISC Performance has a name. A SERIES MOWER CONDITIONER 2 Faster down the straight-away. GET READY TO PUSH RESET on your expectations on what a pull-type hay machine
More informationModel 873 COMBINE ADAPTER
Model 873 COMBINE ADAPTER For 963, 972, 973 & 974 Headers on: Case Combines New Holland Combines John Deere Combines Lexion Combines Agco Combines PARTS CATALOG Form 147071 Issue 09/06 Sugg. Retail: $10.00
More informationD1X and D1XL Series Draper Header
D1X and D1XL Series Draper Header Unloading and Assembly Instructions (North America) 214399 Revision A 2018 Model Year Original Instruction The harvesting specialists. D1XL Draper Header for Self-Propelled
More informationModel 912 / 922 AUGER HEADER and Model 722 HAY CONDITIONER Model 933 Grass Seed Special AUGER HEADER
Model 912 / 922 AUGER HEADER and Model 722 HAY CONDITIONER Model 933 Grass Seed Special AUGER HEADER PARTS CATALOG Form 46619 Issue 01/06 Sugg. Retail: $15.00 Inside Front Cover (blank) Models 912, 922
More informationS-Series Combine and Front End Equipment Optimization
S-Series Combine and Front End Equipment Optimization Ready To Harvest for Wheat John Deere Harvester Works Contents Preface.2 Combine/FEE Bundle Recommendations. 3/4 Draper Inspection and adjustments.
More informationModel 960 Double Delivery and Triple Delivery HARVEST HEADERS PARTS CATALOG
Model 960 Double Delivery and Triple Delivery HARVEST HEADERS PARTS CATALOG with Adapters for: Model 7000 Self-Propelled Windrower Model 9000 Self-Propelled Windrower John Deere 7720, 8820, 9500, 9600
More informationS-Series Combine and Front End Equipment Optimization
S-Series Combine and Front End Equipment Optimization Ready To Harvest for Canola John Deere Harvester Works 0 Contents Preface..2 S-Series Combine Field Installed Bundles.... 3 Header Field installed
More informationCA20 Combine Adapter. Parts Catalog Revision F $15. Original Instruction
CA20 Combine Adapter Parts Catalog $15 Original Instruction CA20 Combine Adapter Published in April, 2014 Model CA20 Combine Adapter PARTS CATALOG 1 CONTENTS PAGE Alphabetical Index... 2 Abbreviations
More informationModel 872 COMBINE ADAPTER PARTS CATALOG
Model 872 COMBINE ADAPTER PARTS CATALOG 1 CONTENTS Frame and Float Group... 2-5 Hydraulics... 6 9 Gear Drive... 10, 11 Feed Draper & Deck... 12-15 Retracting Tine Drum... 16, 17 John Deere Combines Adapter
More informationLeading from the front.
NEW HOLLAND HEADERS 02 HEADER RANGE Leading from the front. Successful combine harvesting starts with the right header, after all, you can only process what you actually put into the machine. By fitting
More informationCOMBINE HEADER INSPECTION REPORT
COMBINE HEADER INSPECTION REPORT Personalized For: Owner Name: Address: City, State, ZIP Code: City, Province, Postal Code: Job Number: Date: Grain Header Size and Model: Grain Header Serial Number: Corn
More informationPut your harvesting on fast-forward.
Put your harvesting on fast-forward. MacDon Self-Propelled Windrowers and Headers MacDon owners are talking read and watch what they are saying by visiting Producers Corner and MacDon TV at macdon.com.
More information2016 Quick Reference Guide S67/S68/S96 S77/S78/S97 S88/S98 Models
2016 Quick Reference Guide S67/S68/S96 S77/S78/S97 S88/S98 Models It is YOUR responsibility to read and understand the safety section in your Operator s Manual and the manual for all attachments before
More informationPerformance has a name. Self-Propelled Windrowers and Headers
Performance has a name. Self-Propelled Windrowers and Headers 2 Redefining what s possible to stay Performance is an ever-changing benchmark. Today s fast can quickly become tomorrow s not-fast-enough.
More informationA40-D Self-Propelled Windrower Auger Header
A40-D Self-Propelled Windrower Auger Header Unloading and Assembly Instructions 147676 Revision A 2016 Model Year Original Instruction The harvesting specialists. A40-D Self-Propelled Windrower Auger Header
More informationuptime INSPECTION PACKAGES
1 sema equipment uptime PACKAGES winter 2016 specials No payments Page 14 No interest until january 1, 2018! 5 plus multi-unit savings up to off % installed parts 2 UPTIME COMBINE 20 SERIES $349 SAVE $550
More informationPRICE LIST 2014 BISO SCHRATTENECKER. always one step ahead! HARVESTING TECHNICS
PRICE LIST 2014 BISO SCHRATTENECKER HARVESTING TECHNICS always one step ahead! CONTENTS ULTRALIGHT 800... 1 VX CROP RANGER TRENDLINE HIGHLINE... 2 VX CROP RANGER TRENDLINE LIGHT... 5 VX CROP RANGER TRENDLINE
More informationAllCropHarvester.com. New/New Old Stock List as of 03/04/2016
AllCropHarvester.com New/New Old Stock List as of 03/04/2016 If your part is not listed, please contact us. We may be able to get it, and/or have it as a used part. Contact us for prices not listed/used.
More informationINSPECTION PACKAGES. $110 Value! buy one, get one. free. plus, select inspections. free dri-fit jacket with 2 paid inspections
INSPECTION PACKAGES $110 Value! buy one, get one free select s plus, free dri-fit jacket with 2 paid s buy one, get one free look for this image for free s! Ask About Window Cleaning and Equipment Washing!
More information9895 Combine Parts Catalog EFF. S/N HSC8101
9895 Combine Parts Catalog EFF. S/N HSC8101 1 FORWARD ALPHABETICAL INDEX The complete alphabetical index appears at the beginning of this publication. It is used to locate major groups, assemblies and
More informationNEW SPEEDROWER SELF-PROPELLED WINDROWERS 130 I 200 I 240 NEW DURASWATH DRAPER HEADERS 425HB I 430HB I 435HB I 440HB
NEW SPEEDROWER SELF-PROPELLED WINDROWERS 130 I 200 I 240 NEW DURASWATH DRAPER HEADERS 425HB I 430HB I 435HB I 440HB 2 3 NOW THERE S EVEN MORE SPEED IN SPEEDROWER New Speedrower Self-Propelled Windrowers
More informationTEREX Woodsman 730 BRUSH CHIPPER
Woodsman 730 BRUSH CHIPPER Parts Manual Customer Dealer S/N Frame # Date Woodsman 150 Commerce Drive, Farwell MI 486 Phone: (800) 953-553 Fax: (989) 588-487 Flipper Discharge Chute Hand Crank Belt Shield
More informationPW8 Pick-Up Header. Unloading and Assembly Instructions (North America) The harvesting specialists Revision A
PW8 Pick-Up Header Unloading and Assembly Instructions (North America) 214263 Revision A 2018 Model Year Original Instruction The harvesting specialists. PW8 Pick-Up Header Published in May 2017 Introduction
More informationModel 802 Center Mount Adapter For New Holland 9030 & TV140 Bi-Directional Tractors PARTS CATALOG
Model 802 Center Mount Adapter For New Holland 9030 & TV140 Bi-Directional Tractors 1 PARTS CATALOG TABLE OF CONTENTS Frame & Tractor Linkage...2,3 Header Linkage & Float Group...4,5 Header Drive Hydraulics
More informationNew Holland H8000 Series Self-Propelled Windrower Specifications
H8000 Series Self-Propelled Windrower Specifications H8040 H8040 Prairie Special H8060 H8080 MODEL H8040 H8060 H8080 H8040 PRAIRIE SPECIAL ENGINE New Holland 4-cylinder New Holland 6-cylinder New Holland
More informationHEAVY-DUTY AND ECONOMY DISC MOWERS
HEAVY-DUTY AND ECONOMY DISC MOWERS H6730 I H6740 I H6750 I H6830 I HM234 I HM235 I HM236 2 3 INTRODUCTION FAST, CLEAN, DEPENDABLE CUTTING IN TOUGH CONDITIONS H6000 DISC MOWERS USE THE PROVEN MOWMAX CUTTERBAR
More informationPARTS MANUAL THIS PAGE INTENTIONALLY LEFT BLANK. Ag-Bag International, Ltd. G7000 June Appendix A
The parts manual is organized into groups, it is designed to make the locating of parts easier. The exploded drawings also show assembly paths. All parts listed are available from your authorized Ag-Bag
More informationNew Holland Heavy-Duty and Economy Disc Mowers H6730 H6740 H6750 H6830 HM234 HM235 HM236
New Holland Heavy-Duty and Economy Disc Mowers H6730 H6740 H6750 H6830 HM234 HM235 HM236 9 Fast, clean, dependable cutting in tough conditions New H6000 disc mowers use the proven MowMax cutterbar to give
More informationEXPERIENCE & QUALITY
EXPERIENCE & QUALITY Cabezal Girasol de Cadenas Modelo G-4570 Thanks to the gathering chains, model G4570 allows to harvest sunflower in the most demanding conditions. QUICK AND EASY FOLDING. Adjusting
More informationNEW DISCBINE CENTER-PIVOT DISC MOWER-CONDITIONERS DISCBINE 313 I DISCBINE 316
NEW DISCBINE CENTER-PIVOT DISC MOWER-CONDITIONERS DISCBINE 313 I DISCBINE 316 CLOSER CUTTING, FASTER DRYDOWN, INCREASED DURABILITY New Holland has taken the Discbine mower-conditioner to a new level with
More informationA-Series A30-S and A30-D Pull-Type Mower Conditioners / A30-S, A30-D, and A40-D Self-Propelled Windrower Headers
A-Series A30-S and A30-D Pull-Type Mower Conditioners / A30-S, A30-D, and A40-D Self-Propelled Windrower Headers Parts Catalog 147911 Revision A Original Instruction The harvesting specialists. MacDon
More informationWD 4 SERIES WINDROWERS AND HEADERS
WD 4 SERIES WINDROWERS AND WD 4 Series Windrower Specifications RODUCT SECIFICATIONS MODELS WD1204 WD1904 WD2304 OWER Engine Case IH 4-Cyl. Tier 3 Case IH 6-Cyl. Tier 3 Rated Engine ower ISO - ECE R120
More informationLEXION Demands rise.
LEXION 770 760 750 740 730 670 Demands rise. LEXION 770 / 770 TT 760 / 760 TT 750 / 750 TT 740 / 740 TT 730 670 Straw Walker Threshing system APS (Accelerated Pre-Separation) MULTICROP concave Drum width
More informationAXIAL-FLOW COMBINE HEADERS AXIAL-FLOW COMBINE HEADERS
COMBINE HEADERS AXIAL-FLOW COMBINE HEADERS AXIAL-FLOW 2 AXIAL-FLOW COMBINE HEADERS. Corn Head Draper Head Grain Head Pickup Head DESIGNED TO MATCH THE CAPACITY OF AXIAL-FLOW COMBINES. Case IH header options
More information2000-B PICK-UP REEL OPERATOR S MANUAL. Form Issue 01/00 Sugg. Retail: $10.00
2000-B PICK-UP REEL OPERATOR S MANUAL Form 46240 Issue 01/00 Sugg. Retail: $10.00 INTRODUCTION Your new Model 2000-B cam-action Pick-Up Reel is ideal for downed-crop conditions and may be mounted on most
More information60 Series Combines By
Sloan Implement Combine Quick Guide 60 Series Combines By Call Center help line # 217-693-6209 Table of Contents 1. Cover 2. Table of Contents 3. Hydro Handle 4. Armrest Button I.D. 17. Header Calibration
More informationCA25 Combine Adapter. Parts Catalog. The harvesting specialists worldwide Rev.C
CA25 Combine Adapter Parts Catalog 169598 Rev.C The harvesting specialists worldwide. TABLE OF CONTENTS Abbreviations...ii Serial Number Breaks...iii 1 Frame and Components... 1 2 Feed Deck... 3 3 Transition
More informationPARTSBOOK. This part of the manual contains part numbers and illustrations based on the latest information available at the time of print.
2 PARTSBOOK This part of the manual contains part numbers and illustrations based on the latest information available at the time of print. Hall Manufacturing, Inc. reserves the right to make changes at
More informationMF SERVICE PARTS GUIDES
MF SERVICE PARTS GUIDES All rights reserved. No part of this publication may be used, reproduced, distributed, transmitted, translated, stored in a retrieval system or reduced to any electronic medium
More informationDraper Platform Adaptation Bundle
Draper Platform Adaptation Bundle 7050-Series Self-Propelled Forage Harvester 900D-Series Draper Platform RC042050 Operator s Manual Includes installation, operating, adjustment, technical, repair parts
More informationStandard Transport Augers Supercharged Transport Augers Low Profile Transport Augers HP Swing Away Augers XL+ Swing Away Augers HP+ Swing Away Augers
Standard Transport Augers Supercharged Transport Augers Low Profile Transport Augers HP Swing Away Augers XL+ Swing Away Augers HP+ Swing Away Augers AUGERS 2 BRANDT AUGERS Product: Standard & SC Transport
More informationBACKSAVER AUGER 12" and 14" Models - XL Series
4 Backsaver Auger Manufactured for highcapacity with heavy-duty construction 122' length 120-153 hp required Swing away auger with a self-leveling hopper Hydraulic winch lift Double flighted in hopper
More informationFLAGSHIP combines. flagship combines. track kits
FLAGSHIP combines 7010 / 8010 / 7120 / 8120 / 9120 series track kits TRACK KITS Application: 7010-9120 Axial-Flow Combines Product Features & Comparisons to Competition Up to 20 mph travel speeds lower
More informationHarvesting performance
Full Line INTRODUCTION Harvesting performance MacDon is a world leader in technology, innovation, and manufacturing of high-performance harvesting equipment. Our products are distributed and supported
More informationModel FD70 FlexDraper with CA20 Combine Adapter. UNLOADING and ASSEMBLY INSTRUCTIONS for NORTH AMERICAN SHIPMENTS
Model FD70 FlexDraper with C20 Combine dapter UNLODING and SSEMLY INSTRUCTIONS for NORTH MERICN SHIPMENTS Form # 169010 Revision C INTRODUCTION This instructional manual describes the unloading, set-up
More informationDuetz- Allis Gleaner Combines. All Models. Instruction & Owners Manual
Instruction & Owners Manual Duetz- Allis Gleaner Combines All Models Crary Company A Division of TerraMarc Industries Box 849 West Fargo, ND 58078 (701) 282-5520 (800) 247-7335 FAX: (701) 282-9522 www.crary.com
More informationDC 133 AND 163 CENTER-PIVOT ROTARY DISC MOWER CONDITIONERS
DC 133 AND 163 CENTER-PIVOT ROTARY DISC MOWER CONDITIONERS FEEDING AND CLEANING SYSTEM HIGH SPEED, HIGH QUALITY. Glide through lush stands of alfalfa, acres of dense grass and even tough cane crops, at
More informationEvaluation Report 645
Printed: March 1991 Tested at: Humboldt ISSN 0383-3445 Group 4c Evaluation Report 645 MacDon Harvest Header A Co-operative Program Between ALBERTA FARM MACHINERY RESEARCH CENTRE PAMI PRAIRIE AGRICULTURAL
More informationMain Frame (1,676 MM (5-1/2 FT.) Hay Pickup)
Main Frame (,676 MM (5-/2 FT.) Hay Pickup) 2 E34250 STRIPPER 2-3000 AUGER E66297 ANGLE 2 300- AUGER, (SUB FOR E34496) (SUB E9572) E9572 ANGLE 2 AUGER E6905 TUBE 59400-86 Pickup Heads Strippers (,676 MM
More informationCombine harvesters CROP TIGER
Combine harvesters CROP TIGER 40 30 Threshing system and engine. Efficient drive power: TATA engine (emissions standard BS III) with up to 76 hp and high reserves of torque thanks to greater power at low
More informationJD 900F TILT SENSOR INSTALLATION
JD 900F TILT SENSOR INSTALLATION Conversion Manual 09040108b HEADSIGHT.COM 574.546.5022 About Headsight Headsight Contact Info Headsight, Inc. 4845 3B Road Bremen, IN 46506 Phone: 574-546-5022 Fax: 574-546-5760
More informationSickles - Split, without drive head - Can ship UPS
Combine Sickle Repairs (OEM Style) - Agco Series 2-8 & Challenger Sections and Section Bolts K412051 BDC6700B Single point section, Kondex no. 432-051 extra heavy, chrome, top serrated section. Fits 300,
More informationV6 Spring Belt Tensioner
Dodgerunner s V6 Spring Belt Tensioner Installation Guide Dodgerunner 2007 The bracket consists of two pieces of 1/8" steel bolted together. The main piece is flat plate with welded-on alternator mounting
More information848H. Grapple Skidder. Overview. Features & Specs. Skidding performance that moves you forward.
Home / Skidders / 848H 848H Grapple Skidder Features & Specs 6.8L Tier 3 PowerTech Plus engine Grapple automatically maintains clamp force Long wheelbase and wide stance deliver unsurpassed stability Excellent
More informationPULL-TYPE FORAGE EQUIPMENT DESCRIPTION REVISION NUMBER. Index 09/01/16 1 PULL-TYPE FORAGE HARVESTERS FP230 09/01/ FP240 09/01/16 5-6
PULL-TYPE FORAGE LATEST PAGE EQUIPMENT DESCRIPTION REVISION NUMBER Index 09/01/16 1 PULL-TYPE FORAGE HARVESTERS FP230 09/01/16 2-4 FP240 09/01/16 5-6 HAY PICKUP HEADERS 890-W 09/01/16 7 27-P 09/01/16 8
More informationPerformance You Can Count On FLEX-WING ROTARY CUTTERS
Performance You Can Count On FLEX-WING ROTARY CUTTERS 1812 1815 2215 2810 2815 3810 3815 4815 2820 1812 FLEX-WING ROTARY CUTTER The 1812 Flex-Wing Rotary Cutter is designed for small tractors with a PTO
More informationP R O D U C T 2018 CATALOG
PRODUCT 2018 CATALOG NEW PRODUCTS JOHN DEERE AIR SEEDER GANG REMOVAL TOOL PAGE 124 VERTICAL UNLOAD AUGER REMOVAL TOOL FOR JOHN DEERE 00 TO "S" SERIES COMBINES PAGE 124 STALK ROLLERS FOR JOHN DEERE 8R SERIES
More informationFOLDABLE CUTTING PLATFORM
FOLDABLE CUTTING PLATFORM GRAIN SYSTEM EVO SMALL ON THE STREET BIG AT WORK Revisited in a modern key, Grain System Evo is the extreme evolution of the field tested foldable cutting platform built since
More information2016 Transverse vs. Axial Comparison
2016 Transverse vs. Axial Comparison The New S9 Series The New Gleaner Vision Cab The S9 Series combines represent a number of developments that will make a significant difference in the productivity
More informationRAKES. Innovators in the Manufacture of Agricultural and Commercial Equipment H&S HAS A MODEL TO FIT YOUR OPERATION
RAKES Innovators in the Manufacture of Agricultural and Commercial Equipment H&S HAS A MODEL TO FIT YOUR OPERATION GROUND ACTION DRI & 1100 SERIES V-RAKE ALL V-style Rakes are available in 8, 10 and 12
More informationREEL AUGGIE / REEL COMMERCIAL
Reel TMR Mixers REEL AUGGIE / REEL COMMERCIAL 3100 / RA 100 Series / RC 200 Series www.kuhnnorthamerica.com Invest in Quality REEL TMR MIXERS 3100 / RA 100 / RC 200 MAXIMIZE EFFICIENCY AND MIXING PERFORMANCE
More informationPRODUCT INFORMATION. 88 Series Axial-Flow Combines New Product Introduction Model Year 2009 GRAIN HARVESTING
GRAIN HARVESTING PRODUCT INFORMATION This is a Sales Education Document not to be used for purposes of advertisement. 88 Series Axial-Flow Combines New Product Introduction Model Year 2009 Book 1: Grain
More information25 Horsepower Hydrostatic Zero-Turn Commercial Riding Mower
MMZ 2, 260 2 Horsepower Hydrostatic Zero-Turn Commercial Riding Mower ILLUSTRATED PARTS LIST " Float Cutter Deck - Figure 1 3 1 27 32 17 6 1 11 31 36 3 19 7 23 1 33 38 18 37 22 3 20 2 10 2 12 21 30 39
More informationGrain Handling Accessories
Grain Handling Accessories It s not an ordinary auger... It s a Westfield Westfield has developed and refined the best grain augers available. To make your job even easier, Westfield has a full lineup
More information3/9/2017. Presenters. Don Seltzner Service Manager Neal Sennhenn Mobile Technician. Pre-Season Check Over. Customer Clinic Events
Presenters Don Seltzner Service Manager Neal Sennhenn Mobile Technician Pre-Season Check Over Customer Clinic Events 1 Header corn headers general Drum Scrapers to prevent plugging Has to be set as close
More informationSikky Oil Pan Install Guide
Sikky Oil Pan Install Guide **If you have a double chain timing belt or after market oil pump setup then further modifications may need to be made in order for the pan to fit.** Remove starter Remove plastic
More informationFLEX-WING ROTARY CUTTERS
FLEX-WING ROTARY CUTTERS 1812 FLEX-WING ROTARY CUTTER The 1812 Flex-Wing Rotary Cutter is designed for small tractors with a PTO horsepower of 50 to 75. The narrow cutting width of 12-feet makes this Flex-Wing
More informationREPAIR MANUAL AFX8010
REPAIR MANUAL AFX 1 27/05/2004 Contents INTRODUCTION DISTRIBUTION SYSTEMS POWER PRODUCTION POWER TRAIN TRAVELLING BODY AND STRUCTURE TOOL POSITIONING CROP PROCESSING A B C D E G K AFX 1 27/05/2004 INTRODUCTION
More informationTaarup 2400 and 2500 series Mounted Disc Mowers. Disc Mowers offering reliable performance and a clean cut
Taarup 2400 and 2500 series Mounted Disc Mowers Disc Mowers offering reliable performance and a clean cut Taarup 2400 series Flexible suspension and reliable performance Taarup offers a new rear mounted
More informationENCORE 52" X-TREME. 2-BAG GRASS CATCHER for units w/ S/N and above ASSEMBLY AND PARTS DIAGRAMS
ENCORE 52" X-TREME 2-BAG GRASS CATCHER for units w/ S/N 53138 and above ASSEMBLY AND PARTS DIAGRAMS Notes: ASSEMBLY INSTRUCTION Figure 1 Using 1/2" wrench, remove the discharge cover and the RH deck belt
More informationINFINITY 1/8 ONROAD KIT SPARE & OPTIONAL PARTS FRONT BODY MOUNT PLATE FRONT SUSPENSION ARM REAR UPPER ARM HOLDER SET SERVO SAVER SET FRONT UPRIGHT
Tabella 1 Code CM-00001 Code R0001 R0002 R0003 R0004 R0005 R0006 R0007 R0008 R0009 R0010 R0011 R0012 R0013 R0014 R0015 R0016 R0017 R0018 R0019 R0020 R0021 R0022 R0023 R0024 R0025 R0026 R0027 R0028 R0029
More informationR80 Rotary Disc Pull-Type Mower Conditioner and Self-Propelled Windrower Header. Parts Catalog Revision C
R80 Rotary Disc Pull-Type Mower Conditioner and Self-Propelled Windrower Header Parts Catalog R80 Rotary Disc Pull-Type Mower Conditioner and Self-Propelled Windrower Header Published: April, 2015 NOTE:
More informationPARTS BOOK FLAIL HEADS 90 SIDE MID-MOUNT
PARTS BOOK FLAIL HEADS 90 SIDE MID-MOUNT 5.0.8 DIAMOND MOWERS, LLC 350 E 60 th St. North Sioux Falls, SD 5704 FOR WARRANTY CALL DIAMOND MOWERS DIRECT: 888-960-0364 OUR TECHNICIANS WILL DIAGNOSE YOUR SITUATION
More informationPower Ditchers Spring Tensioned - BELT DRIVE
EMLINGER MANUFACTURING COMPANY, INC. 16394 U.S. 224 - P.O. Box 299 Kalida, Ohio 45853 419/532-3647 800/537-7370 www.remlingermfg.com ECONOMICAL TO OWN EASY TO OPERATE Series 400 - Center Cut & Offset Power
More information21" STEEL DECK WALK BEHIND MOWER "MR" SERIES 17
Parts Manual for "MR" SERIES 17 PUSH MODELS MR216017B MR216017BV MRP216517B WMR216017B WMR216017BV WMR216517B PROPELLED MODELS MRP216017B MRP216017BV MRP216517B WMRP216017B WMRP216517B EMRP216017B EMRP216517B
More information21" STEEL DECK WALK BEHIND MOWER "MR" SERIES 17
Parts Manual for 21" STEEL DECK WALK BEHIND MOWER "MR" SERIES 17 PUSH MODELS MR216017B MR216017BV WMR216017B WMR216017BV WMR216517B PROPELLED MODELS MRP216017B MRP216017BV MRP216517B WMRP216017B WMRP216517B
More informationTORC SERIES COMPETITION RULES FOR SPORTSMAN 1600 BUGGY
TORC SERIES COMPETITION RULES FOR SPORTSMAN 1600 BUGGY DEFINED AS- A limited 4-wheel vehicle utilizing a type-1, 1600 c.c. Volkswagen air-cooled engine with one person in the vehicle. Division rules supersede
More informationC/M Replacement Poly Row Dividers For JD 90 Series 30 inch Cornheads 30 Inch Center Dividers Only NEW AND IMPROVED POLY SNOUT
To Order Call: 1-800-658-4568 11 C/M Replacement Poly Row Dividers For JD 90 Series 30 inch Cornheads 30 Inch Center Dividers Only NEW AND IMPROVED POLY SNOUT EXACT REPLACEMENT FOR 30 INCH CENTER DIVIDER
More information1. Open front door (20124) and support using Rotunda Flexi-Work Table or equivalent.
file://c:\tso\tsocache\vdtom_3244\svk~us~en~file=svk13002.htm~gen~ref.htm Page 1 of 6 Section 01-03: Doors and Liftgate REMOVAL AND INSTALLATION 1997 Aerostar, Ranger Workshop Manual Doors Front Doors
More informationFOLLOWING DETAIL. One Year Warranty, parts and labor
- Make and Model Henderson TGS 6 6" diameter auger type tailgate sander with 3/8" thick flighting. Direct drive auger and Spinner motors. Fighting is welded to a 2-3/8" O.D. schedule 80 pipe, supported
More informationCombine ranges get a makeover
Combine ranges get a makeover This allows the operator to confidently push the combine closer to its performance limits. Machinery Combines More automation is among tweaks manufacturers are rolling out
More informationStandard Duty Cutter 3 Medium Duty Cutter 4 Heavy Duty Cutter (5, 6 & 7 ) 5 Heavy Duty Cutter (8 ) 6 Heavy Duty Cutter (10 ) 7 M-Heavy Duty Cutter (5
PRODUCT PAGE NUMBER Standard Duty Cutter 3 Medium Duty Cutter 4 Heavy Duty Cutter (5, 6 & 7 ) 5 Heavy Duty Cutter (8 ) 6 Heavy Duty Cutter (10 ) 7 M-Heavy Duty Cutter (5 & 6 ) 8 Super Duty Cutter (6 &
More informationPARTS LIST FOR LN-25 LN-25
P-374 P-374 PARTS LIST FOR 200 250 300 350 400 450 500 550 600 650 700 100 150 50 IN IN/MIN WIRE FEED MORE T13086-99 1. 5. 4. 3. 2. IN/MIN. USED. cross. 35 31 23 25 27 29 15 17 19 21 P-374-A P-374-A ILLUSTRATION
More informationHARVEST MORE FOR LESS WITH MIDWEST!
HARVEST MORE FOR LESS WITH MIDWEST! HARVEST MORE FOR LESS WITH MIDWEST! Unleash your combine s full capacity with a Midwest Durus Draper platform. Our industry leading harvesting platforms integrate seamlessly
More informationPRODUCT INFORMATION. VT 132 VT 168 Major Features and Benefits. Drive System. Split-Drive Planetary System -VT 156 and VT 168 models only
Drive System Split-Drive Planetary System -VT 156 and VT 168 models only Single-Stage Planetary Integral 2-Speed This drive system consists of a split-drive gearbox, two planetary gearboxes, and two torque-disconnect
More informationParts Manual for LAWN TRACTORS MANUAL CLUTCH HYDRO DRIVE SERIES F MODELS LT145H33FBV LT145H38FBV ELT145H33FBV
Parts Manual for LAWN TRACTORS MANUAL CLUTCH HYDRO DRIVE SERIES F MODELS LT145H33FBV LT145H38FBV ELT145H33FBV IT IS THE POLICY OF SNAPPER TO IMPROVE ITS PRODUCTS WHENEVER IT IS POSSIBLE AND PRACTICAL TO
More informationIndex PICK-UP REEL PARTS. Hart Carter ML Reel Bats & Attaching Parts Universal Profiteer Reel Parts... 14
Index Hart Carter ML Reel Bats & Attaching Parts... 5 Hart Carter ML Reel Parts 5 bat...4 6 bat...5 Universal Profiteer Reel Parts... 14 Universal Series I Reel Parts... 15 Universal Series II Reel Parts...16-17
More informationNEW HOLLAND COMBINE FRONTS
NEW HOLLAND COMBINE FRONTS 2 3 MODEL LINE-UP LEADING FROM THE FRONT Successful combine harvesting starts with the right front, after all, you can only process what you actually put into the machine. By
More informationINFORMATION SHEET Mopar A-8 Aluminum Race Engine Block PART NUMBER P AB, P AB, P , or P
Engine Block Components (1) Aluminum Engine Block (8) Cylinder Sleeves (installed) (1) Hardware Kit (1) Set of Main Caps (1) Set of Main Cap Fasteners Part Numbers Deck Nominal Max Over Part # Height Bore
More informationTFX2 80 TFX TFX2 Series Augers
TFX2 80 TFX2 100 TFX2 Series Augers Our Best Farm Proven Features Main Tubes Main tube connections are welded and flanges are bolted togther for maximum strength. Aircraft cable trussing on longer units
More informationNew perforated cascade pan
New perforated cascade pan As crop dynamics have changed, farmers are harvesting more acres of higher-moisture, higher-yielding corn and other high-density crops. Because of this, the 2015 Gleaner has
More informationInstallation Guide CLAAS Lexion Combines with 9 inch Elevators
Installation Guide CLAAS Lexion Combines with 9 inch Elevators 955614_01 4/17 1 Table of Contents System Overview 3 Quick Start Guide 4 Flow Sensor Installation 5 Hydraulic Elevator Adjustment Kit Installation
More information