TS19 AA OVERVIEW. Glazing: Weight: Each panel weighs approximately 7to 8 lbs per sq ft depending on overall panel size.

Transcription

1 0 TS9 AA OVERVIEW TECHNICAL INFORMATION The Panda TB Lift and Slide door system is custom made to order and has been designed specifically for use in climates where thermal insulation and U-factor is of importance in this type of product. Profiles: Profiles are manufactured from 6063-T5 extruded aluminum with a wall thickness of up to /8 allowing for oversized panels. Polyamide iso bars which provide greater structural integrity and sheer strength over other thermal break options. Each panel can be in excess of 70 square feet in size over 4' in height. The door systems are available with either powder coat, Kynar or anodized finishes in virtually any color the customer chooses. Tracking: There are 6 types of tracks available to accommodate any flooring conditions, allowing for an almost seamless look with only 3/6 protrusion above the finished floor. All weight is carried on the bottom track, the top track serves as a guide. Configurations: Many configurations can be achieved using multiple panels, tracks, and angled panel connectors, almost any size and shape of opening can be accommodated. Hardware: The wheel carriages are comprised of synthetic nylon wheels with encased stainless steel ball bearings and have a corrosion resistant treatment applied for high performance in coastal regions. Each wheel carriage can support up to 550 lbs which allows an,00 lb panel to be supported by only one set of two carriages. The operating mechanism includes a multi-point lock and can accept any 0mm Lift & Slide handle. The entire door system has specially designed EPDM gaskets to create a totally closed, weather tight system. Glazing: The Panda Thermally broken lift and slide system can accommodate an over all glass thickness of, 3 8",, 9 6", ", 7 8",, 2 8" max. Weight: Each panel weighs approximately 7to 8 lbs per sq ft depending on overall panel size.

2 02 TS9 AA TYPICAL CONFIGURATIONS TYPOLOGY CONFIGURATION WITH POCKETS (SYSTEM CAN STACK LEFT AND/OR RIGHT) 8 / 2 POCKET 4 / POCKET / POCKET 6 / 2 POCKET 5 / POCKET 4 / POCKET 4 / 2 POCKET 6 / POCKET 3 / POCKET CONFIGURATION WITH FIXED (SYSTEM CAN STACK LEFT AND/OR RIGHT)

3 03 TS9 AA 2 " SURFACE DRAIN TRACK TRACK CONFIGURATION 2 3 SETTING BLOCK WHEEL BOTTOM GASKET TALL BOTTOM TRACK CLIP RAMP 3 BOTTOM TRACK SILL PAN 4 SUB- DRAINAGE FINISH

4 04 TS9 AA 5 6 " SURFACE TRACK TRACK CONFIGURATION 2 3 SETTING BLOCK WHEEL BOTTOM GASKET 5 6" 8" FINISH BOTTOM TRACK 3 6" SUB-

5 TS9 AA RECESSED TRACK TRACK CONFIGURATION RECOMMENDED TRENCH WIDTH: TRACK : 3 5 8" WIDE 2 TRACK: 6 7 8" WIDE 3 TRACK: 0 8" WIDE 4 TRACK: 3 3 8" WIDE 5 TRACK:6 5 8" WIDE 2 3 SETTING BLOCK WHEEL BOTTOM GASKET 3 FINISH SUB. 6" TRENCH 3 5 8" BOTTOM TRACK 05

6 06 TS9 AA RECESSED DRAINAGE TRACK TRACK CONFIGURATION RECOMMENDED TRENCH WIDTH: TRACK : 3 3 WIDE 2 TRACK: 7" WIDE 3 TRACK: 0 WIDE 4 TRACK: 3 WIDE 5 TRACK: 6 3 WIDE 2 3 SETTING BLOCK WHEEL BOTTOM GASKET 3 FINISH SUB. TRENCH DRAIN PORT 3 3 BOTTOM TRACK

7 07 TS9 AA 2 RECESSED TRACK TRACK CONFIGURATION RECOMMENDED TRENCH WIDTH: TRACK : 6 3 8" WIDE 2 TRACK: 9 5 8" WIDE 3 TRACK: 2 7 8" WIDE 4 TRACK: 6 8" WIDE 5 TRACK: 9 3 8" WIDE 2 3 SETTING BLOCK WHEEL BOTTOM GASKET 3 FINISH 2 5 6" SUB. TRENCH ANCHORS 6 3 8" BOTTOM TRACK

8 08 TS9 AA 2 RECESSED DRAINAGE TRACK TRACK CONFIGURATION RECOMMENDED TRENCH WIDTH: TRACK : 6 3 8" WIDE 2 TRACK: 9 5 8" WIDE 3 TRACK: 2 7 8" WIDE 4 TRACK: 6 8" WIDE 5 TRACK: 9 3 8" WIDE 2 3 SETTING BLOCK WHEEL BOTTOM GASKET 3 FINISH 2 SUB. 2 " TRENCH ANCHORS DRAIN PORT 6 3 8" BOTTOM TRACK

9 TS9 AA HEADER HEADER CONFIGURATION HEADER WIDTH: TRACK : 3 5 8" WIDE 2 TRACK: 6 7 8" WIDE 3 TRACK: 0 8" WIDE 4 TRACK: 3 3 8" WIDE 5 TRACK: 6 5 8" WIDE SHIM SPACE 6 7 8" " INSUL BAR HEADER SETTING BLOCK CLIP 2 3 GASKET 09

10 TS9 AA SIDE FRAME FRAME CONFIGURATION SIDE FRAME WIDTH: TRACK : 3 5 8" WIDE 2 TRACK: 6 7 8" WIDE 3 TRACK: 0 8" WIDE 4 TRACK: 3 3 8" WIDE 5 TRACK: 6 5 8" WIDE SIDE FRAME INSUL BAR 6 7 8" 2 3 LOCKING MECANISM SHIM SPACE 3 6" WIDTH UNIT WIDTH RO WIDTH 0

11 TS9 AA OVERLAP CONFIGURATION WIDTH CAP 6" SETTING BLOCK INTERLOCK WIDTH

12 2 TS9 AA BIPART BIPART CONFIGURATION HANDLE CLIP 2 3 WIDTH LOCKING MECHANISM 8 " BIPART ASTRAGAL WIDTH SETTING BLOCK GASKET

13 TS9 AA POCKET INTERLOCK POCKET CONFIGURATION RECOMMENDED POCKET WIDTH: TRACK : 3 3 6" WIDE 2 TRACK: 7 6" WIDE 3 TRACK: 0 5 6" WIDE 4 TRACK: 3 9 6" WIDE 5 TRACK: 6 3 6" WIDE GASKET CLIP POCKET BOARD POCKET BLOCK POCKET WIDTH 2 3 SETTING BLOCK INTERLOCK 3 6" WIDTH UNIT WIDTH RO WIDTH 6" 3

14 TS9 AA 90 CORNER CORNER CONFIGURATION 90 CORNER GASKET " 6" LOCKING MECHANISM WIDTH HANDLE WIDTH CLIP SETTING BLOCK 2 3 4