Reliance BlastMax Blast Resistant Curtain Wall Wet Glazed
|
|
|
- Dominic Gordon
- 5 years ago
- Views:
Transcription
1 Reliance BlastMax Blast Resistant Curtain Wall Wet Glazed Table of Contents (Drawing numbers ie H9601 used as CAD detail reference only ) Elev-RcwStrMax-Wet-Glz-TwnSpn H9601-Head-at-Vision H9602-Typical-Horizontal H9603-Sill-at-Vision H9604-Roll-Over-Horizontal H9605-Roll-Under-Horizontal H9616-Door-Head-OHSC H9617-Door-Head-OHCC H9641-TwnSpnHoriz-Typ H9642-TwnSpnHoriz-Crnr H9643-TwnSpnSplice-Horiz-View H9644-TwnSpan-Stl-Anchor V9601-Jamb Mullion V9616-Door-Jamb V9621-TwnSpn-Std-Mullion V9622-TwnSpn-Hvy-Mullion V9623-TwnSpn-90-Crnr V9631-TwnSpnAnchor-Jamb V9632-TwnSpnAnchor-Std-Vertical V9633-TwnSpnAnchor-Hvy-Vertical V9634-TwnSpnAnchor-90-Crnr V9641-TwnSpnSplice-Std-Vertical V9643-TwnSpnSplice-Heavy-Vert V9644-TwnSpnSplice-90-Crnr
2 January OLDCASTLE ( ) Elev-RcwBlastMax-Wet-Dry-TwnSpn VISION H9601 JAMB V9601 V OSC STD MULL V9623 V9621 HEAVY MULL V9622 V9634 V9632 V9633 VISION H9602 H9604 H9605 H9616 H9617 V9641 H9642 H9641 STEEL H9644 ANCHOR SPLICE H9643 V9616 V9644 V9641 V9643 MODEL: ELEV-RCW-BLSTMAX-WET GLAZED-TWIN SPAN NOTE: FOR SPECIFIC PRODUCT APPLICATIONS CONTACT AN OLDCASTLE BUILDING ENVELOPE REPRESENTATIVE VISION H9603 Section
3 January OLDCASTLE ( ) H9601-Head-at-Vision BACKER ROD & SEALANT (BY OTHERS) HW-325 MULL CAP ATTACH WITH FS-320 #10x1/2" DRIVE SCREW HW-183 SHEAR BLOCK ATTACH TO MULL WITH (4) FS-9 #14X1-1/2" HH. ATTACH TO HORIZONTAL WITH (2) FS-118 #10 X 1" PFH 2 1/2" HW-501 HEAD FG-5185 INTERIOR GASKET WITH APPLICABLE SILICONE GP-117 GASKET AT EXTERIOR LAMINATED INSULATING GLAZING WW-110 FACE CAP & WW-162 PRESSURE PLATE WITH SHOP INSTALLED GP-107 ISOLATOR. FIELD ATTACH WITH FS-325 #12-14 X 1-1/2" HH 7 1/2" Head at Vision - H9601
4 January OLDCASTLE ( ) H9602-Typical-Horizontal LAMINATED INSULATING GLASS ON CW-2102 SETTING BLOCK HW-183 SHEAR BLOCK ATTACH TO MULL WITH (4) FS-9 #14X1-1/2" HH. ATTACH TO HORIZONTAL WITH (2) FS-118 #10 X 1" PFH 2 1/2" HW-500 HORIZONTAL FG-5185 INTERIOR GASKET WITH APPLICABLE SILICONE GP-117 GASKET AT EXTERIOR WW-110 FACE CAP & WW-162 PRESSURE PLATE WITH SHOP INSTALLED GP-107 ISOLATOR. FIELD ATTACH WITH FS-325 #12-14 X 1-1/2" HH 7 1/2" Typical Horizontal - H9602
5 January OLDCASTLE ( ) H9603-Sill-at-Vision WW-110 FACE CAP & WW-162 PRESSURE PLATE WITH SHOP INSTALLED GP-107 ISOLATOR. FIELD ATTACH WITH FS-325 #12-14 X 1-1/2" HH LAMINATED INSULATING GLASS ON CW-2102 SETTING BLOCK FG-5185 INTERIOR GASKET WITH APPLICABLE SILICONE GP-117 GASKET AT EXTERIOR HW-502 SILL 2 1/2" BACKER ROD & SEALANT (BY OTHERS) HW-183 SHEAR BLOCK ATTACH TO MULL WITH (4) FS-9 #14X1-1/2" HH. ATTACH TO HORIZONTAL WITH (2) FS-118 #10 X 1" PFH HW-325 MULL CAP ATTACH WITH FS-320 #10x1/2" DRIVE SCREW Sill at Vison - H9603
6 January OLDCASTLE ( ) H9604-Roll-Over-Horizontal LAMINATED INSULATING GLASS ON CW-2102 SETTING BLOCK HW-183 SHEAR BLOCK ATTACH TO MULL WITH (4) FS-9 #14X1-1/2" HH. ATTACH TO HORIZONTAL WITH (2) FS-118 #10 X 1" PFH HW-532 HORIZONTAL 2 1/2" WW-237 FILLER FG-5185 INTERIOR GASKET WITH APPLICABLE SILICONE GP-117 GASKET AT EXTERIOR WW-110 FACE CAP & WW-162 PRESSURE PLATE WITH SHOP INSTALLED GP-107 ISOLATOR. FIELD ATTACH WITH FS-325 #12-14 X 1-1/2" HH 7 1/2" Roll Over Horizontal - H9604
7 January OLDCASTLE ( ) H9605-Roll-Under-Horizontal LAMINATED INSULATING GLASS ON CW-2102 SETTING BLOCK HW-183 SHEAR BLOCK ATTACH TO MULL WITH (4) FS-9 #14X1-1/2" HH. ATTACH TO HORIZONTAL WITH (2) FS-118 #10 X 1" PFH WW-237 FILLER 2 1/2" HW-533 HORIZONTAL FG-5185 INTERIOR GASKET WITH APPLICABLE SILICONE GP-117 GASKET AT EXTERIOR WW-110 FACE CAP & WW-162 PRESSURE PLATE WITH SHOP INSTALLED GP-107 ISOLATOR. FIELD ATTACH WITH FS-325 #12-14 X 1-1/2" HH 7 1/2" Roll Under Horizontal - H9605
8 January OLDCASTLE ( ) H9616-Door-Head-OHSC 2 1/2" HW-122 POCKET FILLER HW-500 HORIZONTAL FS-322 FASTENER 18" O.C. D-231 SUBFRAME D-38 TOP RAIL FG-5163 DOOR STOP D-125 GASKET Door Head-OHSC - H9616 D-152 GLASS STOP S-83 GLASS STOP
9 January OLDCASTLE ( ) H9617-Door-Head-OHCC HW-122 HW-500 HORIZONTAL FG-5172 DOOR HEAD 3" D-38 FG-5163 DOOR STOP W/D-125 WEATHERING 1" 2 1/2" 2 1/2" OVERHEAD CONCEALED CLOSER W/OFFSET ARM ASSEMBLY Door Head-OHCC - H9617
10 January OLDCASTLE ( ) H9641-TwnSpnHoriz-Typ HW-100 FACE CAP & HW-102 PRESSURE PLATE LAMINATED INSULATING GLASS FG-5185S SPACER GASKET DOW 995 STRUCTURAL SILICONE HW /2" 1 1/4" HW-536 HW-184 STACK SHEAR BLOCK SPLICE SLEEVE GP-160 GASKET Typical Expansion Horizontal - H9641
11 January OLDCASTLE ( ) H9642-TwnSpnHoriz-Crnr HW-100 FACE CAP & HW-102 PRESSURE PLATE LAMINATED INSULATING GLASS FG-5185S SPACER GASKET DOW 995 STRUCTURAL SILICONE HW /2" 1 1/4" HW-536 GP-160 GASKET HW STACK SHEAR BLOCK AT CORNER SPLICE SLEEVE Expansion Horizontal at Corner - H9642
12 January OLDCASTLE ( ) H9643-TwnSpnSplice-Horiz-View STEEL REINFORCING SPLICE STEEL REINFORCING Twin Span Splice - H9643
13 FLOOR SLAB STEEL ANCHOR CLIP (BY OTHERS) ANCHOR BOLT DESIGN BY STRUCTURAL ENGINEER 1 3/4" 1 1/2" 5" 1 1/2" Horizontal View at Steel Anchor - H9644 January OLDCASTLE ( ) H9644-TwnSpan-Stl-Anchor
14 January OLDCASTLE ( ) V9601-Jamb-Mullion HW-500 MULLION RS-25 STEEL CHANNEL HW ANCHOR SLEEVE FS-325 #12-14 X 1-1/2" HH AT HORIZONTAL HW-122 POCKET FILLER ATTACH WITH FS-322 HW-338 MULL CAP ATTACH WITH FS-320 #10x1/2" DRIVE SCREW LAMINATED INSULATING GLASS WW-352 ZONE PLUG GP-117 GASKET AT EXTERIOR FG-5185 GASKET WITH SILICONE AT INTERIOR WW-110 FC & WW-162 PP WITH SHOP INSTALLED GP-107 ISOLATOR. FIELD ATTACH WITH FS-325 #12-14 X 1-1/2" HH 2 1/2" Jamb - V9601
15 January OLDCASTLE ( ) V9616-Door-Jamb HW-500 MULLION RS-15 STEEL BAR - ATTACH (1) HW EACH END HW ANCHOR SLEEVE DRILL RECESS HOLE. ATTACH TO RS-15 WITH FS-322 D-226 SUBFRAME ATTACH WITH FS " O.C. FG-5163 DOOR STOP D-6 DOOR STILE S-83 D /2" 1" Door Jamb - V9616
16 January OLDCASTLE ( ) V9621-TwnSpn-Std-Mullion HW ANCHOR SLEEVE DRILL RECESS HOLE. ATTACH TO RS-15 WITH FS-322 HW-500 MULLION RS-15 STEEL BAR-ATTACH WITH (1) HW EACH END FS-325 #12-14 X 1-1/2" HH AT HORIZONTAL HW-325 MULL CAP ATTACH WITH FS-320 #10x1/2" DRIVE SCREW LAMINATED INSULATING GLASS TM Standard Mullion - V /2" WW-352 ZONE PLUG GP-117 GASKET AT EXTERIOR FG-5185 GASKET WITH SILICONE AT INTERIOR WW-110 FC & WW-162 PP WITH SHOP INSTALLED GP-107 ISOLATOR. FIELD ATTACH WITH FS-325 #12-14 X 1-1/2" HH
17 January OLDCASTLE ( ) V9622-TwnSpn-Hvy-Mullion HW ANCHOR SLEEVE DRILL RECESS HOLE. ATTACH TO RS-15 WITH FS-322 HW-510 MULLION RS-15 STEEL BAR-ATTACH WITH (1) HW EACH END FS-325 #12-14 X 1-1/2" HH AT HORIZONTAL HW-325 MULL CAP ATTACH WITH FS-320 #10x1/2" DRIVE SCREW LAMINATED INSULATING GLASS Heavy Mullion - V /2" WW-352 ZONE PLUG GP-117 GASKET AT EXTERIOR FG-5185 GASKET WITH SILICONE AT INTERIOR WW-110 FC & WW-162 PP WITH SHOP INSTALLED GP-107 ISOLATOR. FIELD ATTACH WITH FS-325 #12-14 X 1-1/2" HH
18 January OLDCASTLE ( ) V9623-TwnSpn-90-Crnr HW-240 MULLION RS-25 REINFORCEMENT STEEL WW T ANCHOR HW CORNER SHEAR BLOCK HW DEGREE CORNER END CAP HW-115 FACE CAP HW-132 CORNER PRESSURE PLATE 90 Degree OSC - V9623
19 January OLDCASTLE ( ) V9631-TwnSpnAnchor-Jamb HW-500 MULLION KOROLATH SHIM FS-259 FASTENER JAMB TAP PLATE Steel Anchor at Jamb - V9631
20 January OLDCASTLE ( ) V9632-TwnSpnAnchor-Std-Vertical KOROLATH SHIM Steel Anchor at Typ. Vertical - V9632
21 January OLDCASTLE ( ) V9633-TwnSpnAnchor-Hvy-Vertical HW-510 HEAVY MULLION KOROLATH SHIM Steel Anchor at Hvy Vertical - V9633
22 January OLDCASTLE ( ) V9634-TwnSpnAnchor-90-Crnr STEEL ANCHOR ANCHOR BOLT DESIGN DETERMINED BY STRUCTURAL ENGINEER Steel Anchor at 90 Corner - V9634
23 January OLDCASTLE ( ) V9641-TwnSpnSplice-Std-Vert HW-500 MULLION 1" HW SPLICE Standard Vertical Splice V9641
24 January OLDCASTLE ( ) V9643-TwnSpnSplice-Hvy-Vert HW-510 MULLION HW SPLICE Heavy Vertical Splice - V9643
25 January OLDCASTLE ( ) V9644-TwnSpnSplice-90-Crnr. HW SPLICE TM Steel Anchor at Typ. Vertical - V9644
Series 6000 XT - Thermal Storefront 2 x 6-1 Glass
Series 6000 XT - Thermal Storefront 2 x 6-1 Glass Table of Contents (Drawing numbers ie H9303 used as CAD detail reference only ) Elev-Series-6000 XT-CenterSet H9301-Horizontal H9302-Head H9303-Sill H9319-Horiz-w-Opwin
FG-2000 Storefront - Center Set 1-3/4 x 4 1/2
FG-2000 Storefront - Center Set 1-3/4 x 4 1/2 Table of Contents (Drawing numbers ie H0501 used as CAD detail reference only ) Elev--Fg-2000-Storefront H0501-Horizontal-Outside Glaze H0502-Head-Horizontal
803 Airport Rd Terrell, TX (972) HP THERMAL CLIP STOREFRONT - 1 3/4 x 5 1/4-1/4 SYSTEM
803 Airport Rd Terrell, TX 75160 (972) 551-6100 HP-175 - THERMAL CLIP STOREFRONT - 1 3/4 x 5 1/4-1/4 SYSTEM Table of Contents (Drawing numbers ie V2421 used as CAD detail reference only ) ELEV-HP175x525-25in
803 Airport Rd Terrell, TX (972) HP THERMAL CLIP STOREFRONT - 1 3/4 x 6-1/4 SYSTEM
803 Airport Rd Terrell, TX 75160 (972) 551-6100 HP-175 - THERMAL CLIP STOREFRONT - 1 3/4 x 6-1/4 SYSTEM Table of Contents (Drawing numbers ie V2441 used as CAD detail reference only ) ELEV-HP175x600-25in
803 Airport Rd Terrell, TX (972) HP THERMAL CLIP STOREFRONT - 1 3/4 x 4 1/2-1/4 SYSTEM
803 Airport Rd Terrell, TX 75160 (972) 551-6100 HP-175 - THERMAL CLIP STOREFRONT - 1 3/4 x 4 1/2-1/4 SYSTEM Table of Contents (Drawing numbers ie V2401 used as CAD detail reference only ) ELEV-HP175x450-25in
Flush Glaze-and Multiplane Frames. Standard Doors with. Fg Flush Glaze -1 3/4 x 4 1/2 Fg Flush Glaze -2 x 4 1/2
Standard Doors with Flush Glaze-and Multiplane Frames Fg-000 - Flush Glaze - / x Fg-000 - Flush Glaze - / x / Fg-000 - Flush Glaze - x / --OLDCASTLE (-) www.oldcastlebe.com p-fg-drfrm-sglact FG-000 - &
82" RO 81 1/4" FD 3/8" MIN JOINT 75 5/8" DLO 2 13/16" SERIES 8200 HORIZONTAL SLIDING WINDOW ELEVATION - BLOCK INSTALL 82" RO 81 1/4" FD
800 SERIES SPECIFICATIONS WINDOWS The Series 800 Horizontal sliding Window offers that rare combination of smooth operation, durability, and toughness. It has a 4-/" (4) deep frame designed to match typical
350/500 Tuffline TM Entrances 1
JANUARY, 2017 350/500 Tuffline TM Entrances 1 FEATURES Features 350 Tuffline TM has 3-1/2" (88.9) vertical stile, 3-3/8" (85.8) top and 6-3/4" (171.5) bottom rail 500 Tuffline TM has 5" (127) vertical
CRL PREMIUM SERIES BALANCED DOOR
C.R.LAURENCE CO. ARCHITECTURAL PRODUCTS ISO9000 COMP AN Y BUILDING GLASS RAILING SYSTEMS SAFER STRONGER WITH BRILLIANT TRANSPARENCY BALANCED OR ALUMINUM CLAD WITH EXPOSED SHAFT AND POWER OPERATORS Revisions
CRL PREMIUM SERIES BALANCED DOOR
C.R.LAURENCE CO. ARCHITECTURAL PRODUCTS CE RT F I E D ISO9000 COMP AN Y BUILDING GLASS RAILING SYSTEMS SAFER STRONGER WITH BRILLIANT TRANSPARENCY I BALANCED OR ALUMINUM RAIL & STILE WITH EXPOSED SHAFT
400 Series Flexiframe Windows (1985 to Present)
400 Series Flexiframe Windows (1985 to Present) Parts Catalog Main Menu Section TOC Search What s in This Section Prefinished Flexiframe units were available 1980 to 1985. These units were not assembled
MAX 50mm Pocket Glazed Commercial Door
1 TM MAX 50mm Pocket Glazed Commercial Door 181 EDGE Architectural Glazing Systems: MAX Technical Manual, January 2015 181 C9700 DG Plain Stile 2 C9706 Wide DG Plain Stile C9712 mm DG Rail mm Sliding Head/Jamb
Aluminum Wood Double-Hung Windows
Replacement Parts Table of Contents Exploded View... 38 Parts List... 39 Liners and Stops... 40 --- 41 Picture Glass Bead and Cutting Schedule... 41 Picture Glass... 42 --- 43 Sash Assembly... 44 --- 47
Commercial Doors. Overview 288 Commercial Doors 290. Commercial Doors
7 Commercial Doors Overview 288 Commercial Doors 290 Commercial Doors 7 Commercial Doors Overview Design Objectives Bi-fold Doors Commercial Doors offer a range of design styles to suit many applications.
Flexiframe Windows (1985 to Present)
Flexiframe Windows (1985 to Present) Parts Catalog Main Menu Section TOC Search What s in This Section Prefinished Flexiframe units were available 1980 to 1985. These units were not assembled or glazed
400 Series Gliding Windows (1991 to Present)
400 Series Gliding Windows (1991 to Present) Parts Catalog Main Menu Section TOC Search What s in This Section Standard Windows................................................ Page 3 Parts Illustration...........................................................
V3 Series Awning Windows (2011 to Present)
What s in This Section Standard and Custom Windows...................................... Page 3 Parts Illustration........................................................... 3 Options- Exterior..................................................
WX/R Xpeditor. Collision Parts Reference Book. For parts information and ordering, call the Autocar Parts Department at
WX/R Xpeditor Collision Parts Reference Book Updated 11 January 2008 Version 1.7 For parts information and ordering, call the Autocar Parts Department at WX/R Collision Parts Included In This Book Cab
350/500 Heavy Wall TM Entrances 1
350/500 Heavy Wall TM Entrances 1 FEATURES Features 350 medium stile has 3-1/2" (88.9) vertical stile, 3-1/2" (88.9) top and 6-1/2" (165.1) bottom rail 500 wide stile has 5" (127) vertical stile, 5" (127)
AAMA/WDMA/CSA 101/I.S.2/A440-08
PERFORMANCE TESTS IN ACCORDANCE WITH AAMA/WDMA/CSA 101/I.S.2/A440-08 Product Manufacturer: Report No.: AI-04016-U1 Rev.1 ACRYLON PLASTICS 122 PAQUIN ROAD WINNIPEG, MANITOBA R2J 3V4 204-669-2345 Report
LTS31 AW OVERVIEW. Configurations: These systems can accommodate up to 5 panel per unit.
0 OVERVIEW TECHNICAL INFORMATION Profiles: Profiles are manufactured from 6063-T5 extruded aluminum with a wall thickness of up to /8 allowing for oversized panels. The door systems are available with
400 Series Flexiframe Windows (1985 to Present)
400 Series Flexiframe Windows (1985 to Present) Parts Catalog Main Menu Section TOC Search What s in This Section Prefinished Flexiframe units were available 1980 to 1985. These units were not assembled
260/360/560 INSULCLAD ENTRANCES
FEBRUARY, 2011 260/360/560 INSULCLAD ENTRANCES FEATURES 1 Features 260 Insulclad has 2-11/16" vertical stile, 2-13/16" top and 4-7/16" bottom rail 360 Insulclad has 4-1/16" vertical stile, 4-1/16" top
Rolling & Wardrobe Doors
Rolling & Wardrobe Doors For over 50 years the Stylmark rolling door has been recognized as the finest in the industry. These doors move effortlessly at the touch of a finger, while adding security to
400 Series Gliding Windows (1991 to Present)
400 Series Gliding Windows (1991 to Present) Parts Catalog Main Menu Section TOC Search What s in This Section Standard Windows................................................ Page 3 Parts Illustration...........................................................
400 Series Gliding Windows (1991 to Present)
400 Series Gliding Windows (1991 to Present) Parts Catalog Main Menu Section TOC Search What s in This Section Standard Windows................................................ Page 3 Parts Illustration...........................................................
CENTERLINE GLASS RAILING - NEW! 2.5 Post System Mechanical/Welded Combo Accepts 7/16 and 9/16 Glass Tested and Engineered System
CENTERLINE 2.5 Post System Mechanical/ Combo Accepts 7/16 and 9/16 2.5 Post 28-60-735 Round Top Cap 28-63-700 Intermediate Rail Option - 28-63-720 Alternate Radius Top Cap - 28-63-710 Option 2.5 Rail Post
37, gr/m 46,8 24,8 48,8 73,8 73, gr/m 93,9 71, gr/m 93,9 71, gr/m 71,4 88,9 39,9
SERIES 42,5,6 57,2 35,2 46,8,8 57,2 35,2 46,8 375 0005 580 gr/m 375 0006 2 gr/m 375 00 6 gr/m 375 0035 819 gr/m 73,6 51,6 84 62 57,2 35,2 48,8 48,8 73,8 73,8 72,9,9 71,9 46,8,8 46,8,8 375 0010 665 gr/m
SINGLE SLIDING WINDOW 1000 SERIES 4-1/2" FRAME SINGLE SLIDER LIFT OUT
PERFORMANCE EVALUATION OF SINGLE SLIDING WINDOW 1000 SERIES 4-1/2" FRAME SINGLE SLIDER LIFT OUT For Dominion Doors & Windows Ltd. IN ACCORDANCE WITH: AAMA/WDMA/CSA 101/I.S.2/A440-11 AND A440S1-17 Report
1010C Sliding Mall Front
NOVEMBER, 2017 FEATURES 1 Features Interior sliding mall front with parallel stacking capability Multi-track or single track with flush or surface mounted tracks Stainless steel cap on sill track Heavy
Visions 3000 Series 924 Parts Catalog
3000 Series Visions 3000 Series 924 Parts Catalog #1218583 FOR PRODUCT PRODUCED AFTER 4/07 Casement Casement Awning awning French Casement french casement Visions Windows and Doors 880 South View Drive
SUN CONTROL. Architectural Products C9-1 SUN CONTROL CLEAR STORY SUN SHADES & LIGHT SHELVES C9-7 C9-11 C9-2. Catalog Page Number C9-5 C9-9
& LIGHT SHELVES C9- C9-7 C9- Catalog Page Number C9-5 C9-9 Sunshades... C9- thru C9-6 Interior Light Shelves... C9-7 thru C9-9 C9-3 C9-7 C9-7 C9-5 C9-8 C9-8 SCALE: N.T.S. C9- WAUSAU 008 Extruded Sunshades
TS19 AA OVERVIEW. Glazing: Weight: Each panel weighs approximately 7to 8 lbs per sq ft depending on overall panel size.
0 TS9 AA OVERVIEW TECHNICAL INFORMATION The Panda TB Lift and Slide door system is custom made to order and has been designed specifically for use in climates where thermal insulation and U-factor is of
350/500 TUFFLINE ENTRANCES 1
350/500 TUFFLINE ENTRANCES 1 FEATURES Features 350 Tuffline has 3-1/2" vertical stile, 3-3/8" top and 6-3/4" bottom rail 500 Tuffline has 5" vertical stile, 5" top and 6-3/4" bottom rail Door is 2" deep
CONSTRUCTION CONSULTING LABORATORY, INTERNATIONAL
TEST REPORT: SERIES 8220 ALUMINUM SINGLE HUNG WINDOW Prepared for: 5625 E. Firestone Boulevard South Gate, CA 90280 1601 Luna Road S-UNITED, INC. Office: (972) 242-0556 Carrollton, Texas 75006 A Quality
SLIDING GLASS DOOR - NON-IMPACT
SLIDING - GENERAL NOTES: 1. THE PRODUCT SHOWN HEREIN IS DESIGNED AND MANUFACTURED TO COMPLY WITH THE FLORIDA UILDING CODE (FC), CURRENT EDITION. 2. GLAZING OPTIONS: (SEE ) 100 SW TH AVE. 3. APPROVED CONFIGURATIONS
sliding storefront systems
sliding storefront systems Table of Contents Sliding Storefront Systems (F) Sliding Storefront Systems (F) Table of Contents MS-360 Mall Slider Pricing Example page 2 MS-360 Mall Slider page 4 PW-180 Phantom
AAMA/WDMA/CSA 101/I.S.2/A440-08
PERFORMANCE TESTS IN ACCORDANCE WITH AAMA/WDMA/CSA 101/I.S.2/A440-08 Product Manufacturer: Report No.: AI-04016-T1 Rev.1 ACRYLON PLASTICS 122 PAQUIN ROAD WINNIPEG, MANITOBA R2J 3V4 204-669-2345 Report
Aluminium Sliding Door System
Aluminium Sliding Door System This system focuses on modern, sharp lines which are the result of the small radii achieved in the design of the aluminium sections. It allows designers to create distinctive
INSTALLATION INSTRUCTIONS MODEL KFD-555
AIR MOVEMENT PROS & HORIZONTAL MOUNT ATTACHING S TO S Fire dampers must be attached to sleeves as shown in fig. 1. All four sides of the damper frame must be attached to the sleeve with one row of attachments
CASEMENT. Operator / Stationary Units
Operator / Stationary Units MO (mm) 1' - 6" (457) 2' - 0" (610) 2' - 6" (762) 3' - 0" (914) RO (mm) 1' - 6" (457) 2' - 0" (610) 2' - 6" (762) 3' - 0" (914) FS (mm) 1' - 5 (445) 1' - 11 (597) 2' - 5 (749)
THERMALSTEEL WINDOWS & DOORS STRENGTH STYLE PERFORMANCE
THERMALSTEEL WINDOWS & DOORS STRENGTH STYLE PERFORMANCE 1 Slender lines and minimal profiles give a lightness to our Thermal Steel Windows and Doors, creating a minimalist aesthetic and powerful architectural
CENTER-HUNG NARROW STILE SERIES 250 DOOR TYPICAL ELEVATION CENTER-HUNG NARROW STILE SERIES 250 DOOR ADA COMPLIANT ELEVATION
C.R.LAURENCE CO. ARCHITECTURAL PDUCTS CE RT F I E D ISO9000 COMP AN Y BUILDING RAILING SYSTEMS SAFER STNGER WITH BRILLIANT TRANSPARENCY I OR SYSTEM Revisions By: FOR /4" OR " GLAZING 8 NARW VERTICAL STILE
CENTER-HUNG MEDIUM STILE SERIES 400 DOOR TYPICAL ELEVATION CENTER-HUNG MEDIUM STILE SERIES 400 DOOR ADA COMPLIANT ELEVATION
C.R.LAURENCE CO. ARCHITECTURAL PDUCTS CE RT F I E D ISO9000 COMP AN Y BUILDING GLASS RAILING SYSTEMS SAFER STNGER WITH BRILLIANT TRANSPARENCY I OR SYSTEM Revisions By: 1 1 FOR 1/4" OR 1" GLAZING 8 3 MEDIUM
U.S. ALUMINUM 3025 SERIES SLIDING DOORS
U.S. ALUMINUM 3025 SERIES SLIDING S 83 83 1/8" 40" 72" 71 1.1 1.5 1.3 1.7 1.8 1.9 (BEYOND) TESTED TO AAMA LC25 ACCOMODATES 1" (25mm) AND 1 (32mm) GLAZING OPTIONAL THERMALLY BROKEN HEAD AND JAMB CHANNELS
CENTER-HUNG WIDE STILE SERIES 550 DOOR TYPICAL ELEVATION CENTER-HUNG WIDE STILE SERIES 550 DOOR ADA COMPLIANT ELEVATION
C.R.LAURENCE CO. ARCHITECTURAL PRODUCTS CE RT F I E D ISO9000 COMP AN Y BUILDING GLASS RAILING SYSTEMS SAFER STRONGER WITH BRILLIANT TRANSPARENCY I OR SYSTEM Revisions By: 1 1 FOR 1/4" OR 1" GLAZING 8
ASTM E 1886 and ASTM E 1996 TEST REPORT. Report No.: A Rendered to: GLASSCRAFT DOOR COMPANY Houston, Texas
Architectural Testing ASTM E 1886 and ASTM E 1996 TEST REPORT Report No.: A6457.01 801 18 Rendered to: GLASSCRAFT DOOR COMPANY Houston, Texas PRODUCT TYPE: In Swing Fiberglass Door with Side Lites SERIES/MODEL:
TM MANUFACTURERS
TM200 1.1 MANUFACTURERS A. Acceptable Manufacturer: Raynor, which is located at: 1101 East River Rd. P. O. Box 448 ; Dixon, IL 61021-0448; Toll Free Tel: 800-4-RAYNOR; Tel: 815-288-1431; Fax: 888-598-4790;
Visions 2000 Double Hung Tilt Window Parts Reference Catalog
Visions 2000 Double Hung Tilt Window Parts Reference Catalog (Includes Parts and Information for Double Hung Tilt Oriel and Double Hung Tilt Picture) #010636 (Revised 01/03) Weather Shield Mfg., Inc. Medford,
BALANCER DOOR WITH GEARBOX TENSIONER
INSTALLATION INSTRUCTIONS BALANCER DOOR WITH GEARBOX TENSIONER Phone: (800) 421-6144 Fax: (800) 587-7501 crlaurence.com usalum.com crl-arch.com 11M0219_REV_A ORDER OF ASSEMBLY AND INSTALLATION INTRODUCTION...
24" DLO 24" DLO 1 1/2" 1 1/2" 1 1/2" 1 1/2" 1 1/2" " FRAME DIMENSION 34" DAYLITE OPENING 1/8" 85 1/2" FRAME DIMENSION 3 OPP 3.
SERIES 87-AR SINGLE AND DOUBLE BUTT HINGE HUNG DOORS W/ & W/O SIDELITE(S), W/ & W/O TRANSOM SHOWN WITH OPTIONAL CRL WOOD FLUSH DOOR SYSTEM DESIGNED TO WRAP -7/8" ( MM) WALLS DESIGNED FOR TOP LOAD GASKETS
Springline Windows (1994 to Present)
Springline Windows (1994 to Present) Parts Catalog Main Menu Section TOC Search What s in This Section Standard Windows................................................ Page 3 Parts Illustration...........................................................
B) The University shall check the installation of finish hardware at the completion of the Project.
08700 HARDWARE 1.0 General A) The University of California, Santa Barbara, uses IR Security & Safety Consultants (AHC) (626 585-9927) as its consultant for doors and door hardware. Contacts with the firm
SLIDING DOOR SYSTEM_ AIR TECHNICAL BOOK. System description Accessories
SLIDING DOOR SYSTEM_ AIR TECHNICAL BOOK System description Accessories 1 SLIDING DOOR SYSTEM_ AIR 1.0_ System description_ page 03 2.0_ Profiles_ page 04 3.0_ Profile finishes_ page 10 4.0_ Panels_ page
Durulite Door Hardware Manual
R Durulite Door Hardware Manual World s Leading Manufacturer Of Traffic Doors Cincinnati, Ohio and Redmond, Oregon Phone: 1-800-543-4455 FAX: 1-800-245-7045 Www.chasedoors.com TABLE OF CONTENTS DESCRIPTION
5820 / 5920 SERIES DOOR
5820 / 5920 SERIES DOOR Center Glazed Offset Glazed Side Load Top Load WALL-SLIDING PATIO DOOR SYSTEM Montauk, NY Bates Masi Architects MULTIPLE CONFIGURATIONS AVAILABLE X X X Multi Panel Thermal Non-Thermal
Perma-Shield Gliding Patio Doors
Casement Perma-Shield & Awning Gliding Patio Windows Doors 400 Casement Awning Windows & CUSTOM SIZING! in 1/8 increments. SECTION REFERENCE Table of Basic Unit Sizes 220 Opening Specifications 221 Basic
400 Series Springline Windows (1994 to Present)
400 Series Springline Windows (1994 to Present) Parts Catalog Main Menu Section TOC Search What s in This Section Standard Windows................................................ Page 3 Parts Illustration...........................................................
Pella Impervia 350 Series Vinyl Awning Windows and Sliding Patio Doors
Pella Impervia 350 Series Vinyl Awning Windows and Sliding Patio Doors Pella 350 Series premium vinyl windows and patio doors are available in a variety of frame types to help ensure a smooth installation
EXTRUDED ALUMINUM BALANCED DOORS AND ENTRANCES
WIKK INDUSTRIES, INC. MasterFormat 95 SECTION 08480 MasterFormat 04 SECTION 08 42 36 EXTRUDED ALUMINUM BALANCED DOORS AND ENTRANCES PART 1 GENERAL 1.1 DESCRIPTION A. Work included: Entrance and vestibule
ROLLER SHADE SPECIFICATIONS
Part 1 General 1.1 Scope A. Furnish and install roller shades provided by Fabtex Inc., (800) 778-2791 B. Substitutions: Not Permitted C. Related work specified elsewhere 1.2 Quality Assurance A. Installer
190/350/500 STANDARD ENTRANCES
APRIL, 2012 190/350/500 STANDARD ENTRANCES FEATURES 1 Features 190 narrow stile has 2-1/8" vertical stile, 2-1/4" top and 3-7/8" bottom rail 350 medium stile has 3-1/2" vertical stile, 3-1/2" top and 6-1/2"
SLIDING DOOR SYSTEM_ S42 TECHNICAL BOOK. System description Accessories
SLIDING DOOR SYSTEM_ S42 TECHNICAL BOOK System description Accessories 1 SLIDING DOOR SYSTEM_ S42 1.0_ System description, Sliding panel_ page 03 2.0_ Profiles_ page 04 3.0_ System description, Fixed panels_
2000T TERRACE DOOR. Features
AUGUST, 0 000T TERRACE DOOR FEATURES Features Performance class and grade: Single: AW-PG90-ATD Pairs: AW-PG45/65-ATD Inswing or outswing -/4" deep door rails and stiles Mitered door and frame corners Heavy
100 Series Single-Hung Windows (2008 to Present)
100 Series Single-Hung Windows (2008 to Present) Parts Catalog Main Menu Section TOC Search What s in This Section Standard and Custom Windows...................................... Page 3 Parts Illustration...........................................................
specialty entrances Table of Contents Specialty Entrances (C)
specialty entrances Table of Contents Specialty Entrances (C) Specialty Entrances (C) Table of Contents Entrance Door Handing page 2 Catalog Description Key page 3 Door Nomenclature page 3 Glass Entrance
SECTION METAL LOCKERS. A. ADAAG Americans with Disabilities Act, Accessibility Guidelines.
SECTION 10 51 13 METAL LOCKERS PART 1 GENERAL 1.01 SECTION INCLUDES A. Heavy Duty Welded Gear Lockers. B. Locker benches. 1.02 REFERENCES A. ADAAG Americans with Disabilities Act, Accessibility Guidelines.
Rhino series thermally broken 2 3/8" aluminum windows Information book
Gerkin Windows & Doors P.O Box 3203 Sioux City IA. 51102 Phone: (402) 494-6000 (800) 475-5061 Fax: (402) 494-6765 Web site: www.gerkin.com E-Mail: gerkin @gerkin.com Rhino series thermally broken 2 3/8"
MODEL OAL. Water Penetration. Water Penetration. Free Area OAL PERFORMANCE REGISTERS GRILLES &
MODEL OAL The OAL series of etruded aluminum stationary louvers is manufactured for installation in eterior wall openings. They are designed to allow fresh air and ehaust air to flow into/out of the building
GENERAL INFORMATION 600-QFH QFJ APPLICATIONS CODES AND STANDARDS PRODUCT DATA
TECHNICAL GUIDE GENERAL INFORMATION The QuickFrame Rough Opening System streamlines installation by reducing the number of components required to frame windows and doors. The QuickFrame system comes in
400 Series Springline Windows (1994 to Present)
400 Series Springline Windows (1994 to Present) Parts Catalog Main Menu Section TOC Search What s in This Section Standard Windows................................................ Page 3 Parts Illustration...........................................................
A. This Section includes the following types of sectional overhead doors:
SECTION 08361 - SECTIONAL OVERHEAD DOORS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification
Series 2003T. Belt Drive Telescoping Slide Door INSTALLATION INSTRUCTIONS. To be used with H210 C2150 Ver.10 Control Setup Instructions
Series 2003T Belt Drive Telescoping Slide Door INSTALLATION INSTRUCTIONS To be used with H210 C2150 Ver.10 Control Setup Instructions DIRECTION OF DOOR OPENING G230T, JUNE 2009 A U T O M A T I C S G230T.1
100 Series Gliding Doors (2009 to Present)
100 Series Gliding Doors (2009 to Present) Parts Catalog Main Menu Section TOC Search What s in This Section 2-Panel.......................................................... Page 3 Parts Illustration...........................................................
23-34 BODY COMPONENTS XJ VEHICLES J DOORS INDEX
23-34 BODY COMPONENTS XJ VEHICLES J DOORS INDEX page Door Alignment Adjustment Major... 47 Door Alignment Adjustment Minor... 46 Door Edge Guard/Edge Protector Strip... 61 Door External Handle... 55 Door
WHY CHOOSE OMEGA RESIDENTIAL JOINERY
WHY CHOOSE OMEGA RESIDENTIAL JOINERY CONTENT 4 8 14 18 20 301 Series Awning Windows 309 Series Hinged Doors 313 Series Bi-fold Doors and Windows 303 Series Sliding Windows and 311 Series Sliding Doors
Thermal Doors & Frames for Custom Hardware Application. Item Page Unit List Price/ Total Description No. Qty. Unit List
Thermal Doors & Frames for Custom Hardware Application Pricing Example C1.1 Page 1 Note: See Section C2 for Standard Door & Frame Hardware Items. Finish: Doors: Bronze (DB) 4" Medium Stile 10" Bottom Rails
BUILDER SERIES MODULAR SIZING SUPPLEMENT BUILDER SERIES Single Hung & Double Hung
BUILDER SERIES W I N D O W S A WHOLE NEW POINT OF VIEW. E A S T Single Hung & Double Hung Modular units are manufactured to traditional wood window rough opening dimensions. BUILDER SERIES 1000 S I Z I
Section Index Cross Reference: Sorted by Buffers Model Numbers REF-1 to -9 Cross Reference: Sorted by Penz Model Numbers REF-10 to -18
Section Index Cross Reference: Sorted by Buffers Model Numbers REF-1 to -9 Cross Reference: Sorted by Penz Model Numbers REF-10 to -18 1000 - LANDING LEG PARTS Sandshoes: Low Profile 1001-1 to -3 Sandshoes:
Page 1 Monumental Blank Entrances Applied Hardware & Preps, Tubelite Standard Hardware
Page 1 Monumental Blank Entrances Applied Hardware & Preps, Tubelite Standard Hardware Butt Hinges Pivots Pull Handles/Push Bars Heavy Duty P094 Mortised Butt Hinge P094MD P094MF (includes P2093 $ 123
INSULATED METAL WALL PANEL SYSTEMS TABLE OF CONTENTS
INSULATED METAL WALL PANEL SYSTEMS TABLE OF CONTENTS Insulated Wall Panel Profiles...2 Insulated Metal Wall Panel Tables...4 2 Panel Thickness Standard (2) Fasteners...4 2 Panel Thickness Optional (3)
MUTO Premium & Comfort
MUTO Premium & Comfort Equia nestotatus enis 2015 Lecest Suntur Orem fuga Equia nestotatus Disciisi nisquissus Nequisi Voloreptatae Consecumque soloribus Iminveria volorum Manual sliding door system dormakaba
SECTION DIRECTORY. Designer Series DS-AW-1 AWNING
SECTION DIRECTORY Designer Series Product Selection Guide Size and Performance Data... DS-AW-2 Features and Options... DS-AW-3 Combination Assemblies... DS-AW-4 Glazing Performance... DS-AW-5 Grille Types
Bohle SlideTec Optima 150 Sliding Door Systems
Bohle SlideTec Optima 150 Sliding Door Systems www.bohle-america.com LEGEND FOR SLIDING By-parting Application types Single panel Pocket door Door mounting / Installation types Wall mounted / Barn Door
LLOYD INDUSTRIES INC.
1-1/2 HOUR FIRE/SMOKE DAMPER FIRE/SMOKE DAMPER VERTICAL OR HORIZONTAL MOUNT 1-1/2HR RATING (Bi-Directional) (For use in 2hour or less rated partitions) Located in pin grooves. Minimum Size Single Section
100 Series Gliding Windows (2008 to Present)
100 Series Gliding Windows (2008 to Present) Parts Catalog Main Menu Section TOC Search What s in This Section Standard and Custom Windows...................................... Page 3 Parts Illustration...........................................................
R. Manually Operated: Standard closure to be manually operated push up, pull down with removable retrieval rod as standard. The effort to raise or low
4.02 ROLLING SECURITY CLOSURE SYSTEM: Rolling Security Closure System: Curtain Design: Lexan Panel 2. Constructed of 3 on center extruded aluminum sections. Each section framed with continuous, double
ASTM E 1886 and ASTM E 1996 TEST REPORT. Report No.: A Rendered to: GLASSCRAFT DOOR COMPANY Houston, Texas
Architectural Testing ASTM E 1886 and ASTM E 1996 TEST REPORT Report No.: A6458.01 801 18 Rendered to: GLASSCRAFT DOOR COMPANY Houston, Texas PRODUCT TYPE: Fiberglass In Swing Glazed Double Doors SERIES/MODEL:
SIZE AND PERFORMANCE SUMMARY GLAZING PERFORMANCE GRILLE PROFILES AND PATTERNS SIZE TABLES DESIGN DATA DETAILED PRODUCT DESCRIPTION CROSS SECTIONS
SECTIN DIRECTRY SIZE AND PERFRMANCE SUMMARY GLAZING PERFRMANCE GRILLE PRFILES AND PATTERNS SIZE TABLES DESIGN DATA DETAILED PRDUCT DESCRIPTIN CRSS SECTINS The information published in this document is
CHAPTER 3 INTEGRITY WOOD ULTREX DOUBLE HUNG
CHAPTER 3 INTEGRITY WOOD ULTREX DOUBLE HUNG Specifications / NFRC Values... 3.2 Egress, Lite and Vent Measurements... 3.3 Egress, Lite and Vent Measurements / Abbreviations... 3.4 Sizing Guidelines / Measurement
LEVELe ELEVATOR INTERIORS WITH LIGHTPLANE INSTALLATION INSTRUCTIONS. STANDARD LEVELe COMPONENTS CEILING COMPONENTS LIGHTPLANE COMPONENTS TOOLS NEEDED
TOOLS NEEDED SUCTION CUP(S) IMPACT DRILL CRESCENT WRENCH #8-18 SQUARE / PHILIPS COMBO DRIVE BIT SQUARE MASKING TAPE PENCIL DRILL BIT EXTENDER 3/8" DRILL BIT TAPE MEASURE CENTER PUNCH LEVEL BRUSH INCLUDED
100 Series Awning Windows (2008 to Present)
100 Series Awning Windows (2008 to Present) CCParts Catalog Main Menu Section TOC Search What s in This Section Standard and Custom Windows...................................... Page 3 Parts Illustration...........................................................
EXTRUDED ALUMINUM TEMPERED GLASS BALANCED DOORS AND ENTRANCES
WIKK INDUSTRIES, INC. MasterFormat 95 SECTION 08480 MasterFormat 04 SECTION 08 42 36 EXTRUDED ALUMINUM TEMPERED GLASS BALANCED DOORS AND ENTRANCES PART I GENERAL 1.1 DESCRIPTION A. Work included: Entrance
6100 SERIES SINGLE HUNG
STORMSTRONG IMPACT RESISTANT 6100 SERIES SINGLE HUNG 1. 8 0 0. 3 2 7. 3 0 8 6 w w w. C W S. c c STORMSTRONG Impact Resistant Single Hung Windows Storm Strong 6100 Series Single Hung 1-1/2 pre-punched Nail
PERMA ROLL 75. installation instructions Automatic Roll-up Door. note:
p PERMA TECH, INC. 363 hamburg street buffalo, new york 14204 phone: (716) 854 0707 fax: (716) 854 0774 1 800 362 7325 www.permatechinc.com PERMA ROLL 75 installation instructions Automatic Roll-up Door
Industrial and Stainless Steel Track and Hardware Pg 53. Straight Sliding Industrial wood. Door Hardware metal
Contents Introduction to P C Henderson Pg 2 Commercial Straight Sliding Systems Pg 3 Husky Husky Pacer Pacer Flexirol Commercial Folding Systems Pg 4 Husky Pacer Centerfold Pacer Endfold Pacer Endfold
AlumaView AV200. A. Section Metal Fabrications: Miscellaneous for steel supports.
AlumaView AV200 PART 1 GENERAL 1.1 SECTION INCLUDES A. Commercial sectional doors. 1.2 RELATED SECTIONS A. Section 05500 - Metal Fabrications: Miscellaneous for steel supports. B. Section 08710 - Door
STRUCTURAL GLAZING LTD. SG2000 Product Manual. Fixed Glazed Units Top Hung Windows Side Hung Windows
SG2000 Product Manual Fixed Glazed Units Top Hung Windows Side Hung Windows SG PRODUCT RANGE The Structural Glazing range comprises of three core products: THE SG2000 ECO VENT THE SG2000-101/2 FIXED LIGHT
AUTOMATIC ENTRANCES SLIDING GILDOR, INC. SECTION [08460] MODEL SLM SERIES TYPE COM
![AUTOMATIC ENTRANCES SLIDING GILDOR, INC. SECTION [08460] MODEL SLM SERIES TYPE COM](/thumbs/78/78203711.jpg "AUTOMATIC ENTRANCES SLIDING GILDOR, INC. SECTION [08460] MODEL SLM SERIES TYPE COM")
PART 1 - GENERAL 1.01 SUMMARY A. This Section includes the following types of automatic entrance doors: 1. Exterior and interior, bi-parting, sliding automatic entrance doors. B. Related Sections: 1. Section
Instructions for 2-row monitoring only
Installation Instructions for CaseIH cotton picker models: Instructions for 2-row monitoring only CAUTION: Ensure the model numbers shown above correspond to the machine model. If you receive the incorrect