MAX 50mm Pocket Glazed Commercial Door
|
|
- Amice Gilbert
- 5 years ago
- Views:
Transcription
1 1 TM MAX 50mm Pocket Glazed Commercial Door 181 EDGE Architectural Glazing Systems: MAX Technical Manual, January
2 C9700 DG Plain Stile 2 C9706 Wide DG Plain Stile C9712 mm DG Rail mm Sliding Head/Jamb Track Tommaslide 250kg Top Track C93 Track cover C9389 Pelmet suit 50mm door DG Pivot Stile C9707 Wide DG Pivot Stile Closing Jamb infil C53 Sliding Door Track C938 Snap in Sill track C9383 mm Sill Track C9390 Top Track Bracket C9703 DG Wiper Stile 120mm DG Rail Thermal Sill Filler C9386 Sliding Interlock CH98 Heel & Toe setting block C970 DG Receiver Stile C9705 DG Lock Stile (pairs) C97U mm Midrail CH9598 Spigot & Backing Plate Package CH9593 Striker Block CHPLUG10 10mm dia Hole Plug CH10 Top roller Assembly 250kg C9709 DG Bifold Stile C9710 DG Bifold Receiver Stile C98U 120mm Midrail CH9591 Tommaslide roller assembly incl Bracket & Locknut 300kg CH9582 Tandem Roller Shroud CH9583 Tandem roller assembly SS 300kg 182 EDGE Architectural Glazing Systems: MAX Technical Manual, January
3 CH9550 RPVC Filler 3 RPVC Short Thermal Separator CH9585 Backing Plate CH99 Spigot CH9553 RPVC Large Thermal Separator 10. Pan Hd Type 10 off on top Cap Hd Type 3 2 off C936 Backing Plate Pan Hd Type 10 2 off on bottom Maximum Height: 3000 Maximum Width: 1000 Recommended min 3 hinges per leaf Hinges over 200 C9712 Rail Options Doors can be manufactured using the following Rail combinations: Rail at Top / 120 Rail at Bottom Rail Top & Bottom 120 Rail Top and Bottom. The 120 rail matches the sightline of the door and Max or U-MAX framing midrails. C926 CH9610 Door Corner Joinery Bill of Materials Part Description Qty 120 Commercial Door Leaf CH99 CH9585 Cap Hd Type 3 Max Spigot Backing Plate 25 x M6 Cap Head spigot fastener 8 Standard Stiles C9700 C Rail = DO #10 x 12 CSK U/C screw McCallum A10M, A10CPF or similar hinge provides bi-directional fixing to the frame for added strength Wide Stiles Glass = DO-152 C9706 C9706 Glass = DO Rail = DO EDGE Architectural Glazing Systems: MAX Technical Manual, January
4 Maximum Height: 3000 Maximum Width: C926 C9712 C9227 C9228 Rail Options Pivot doors usually use the top rail and 120 bottom rail which best suits standard COC closer hardware. The 120 deep rail can be used top & bottom, but the pivot arm needs to be packed out to suit. Pairs of Hinged, Pivot or Sliding Doors Not recommended for weathered or exposed applications Pairs of Hinged Doors only Recommended for weathered or exposed applications as the stiles overlap. Requires Lever narrow backset lock Pairs of Sliding Doors only. Improves the weathering capabilities over other stile combinations as the stile adaptor captivates the lock stile and has additional seals. C9700 C970 CH9593 Striker Block Face mounted flushbolt on passive leaf 172 Face mounted flushbolt on passive leaf Lock Stile, Rebate to external 186 PB850-3P weatherpile C9705 C55 Meeting Stile Adaptor Both sides CSK Type 2 screw PS11 Weatherpile C Glass = DO Rail = DO EDGE Architectural Glazing Systems: MAX Technical Manual, January
5 50 2 Midrail Height to Top C9550 C9562 C9712 mm Door Midrail C97U 0 x 0 x 3 angle 33mm as midrail bracket mm Door Midrail 8 C98U Frame Height C9500 C9512 mm as backing plate 10 C53 C9712 C9389 CH10 Overhead roller assembly Pan Hd Type CH9522 Door Stop CH9550 RPVC Infil C9229 Adaptable to all U-MAX Framing Systems Track usually fitted internally Easy adjustment with removable track pelmet Single sliding panel or pairs of panels Cannot be used as multi slide Height and width of panel limited by weight and strength of interlocking mullion or stile Can be used with C9383 sill track (see 100CDG for more details) Maximum Height: 2700 Maximum Width: 2000 Maximum weight per leaf: 250kg 185 EDGE Architectural Glazing Systems: MAX Technical Manual, January
6 175 6 CH9591 Roller assy Removable track cover for adjustment or panel removal Pan Hd Type 5 screw PB69550-P Weatherpile CH9590 Roller Bracket Bottom Rail at top recommended for large and heavy doors C93 50 x 25 fixing angle C93 50 x 25 fixing angle CH9591 Roller assy Removable track cover for adjustment or panel removal Pan Hd Type 5 screw CH9590 Backing Plate PB69550-P Weatherpile off Pan Hd Screws fix into spigot holes Stile = Frame Height -120 Stile = Frame Height -120 Bottom Rail at top recommended for large and heavy doors C9383 CH9550 flat infil 6 Adaptable to all U-MAX Framing Systems Primary sliding panel can be on external or internal track Replaceable track 2 part subsill caters for tracks 50mm diameter roller caters for heavy weights and smoother operation Single or multiple stacking tracks Suited to cavity door applications Used with C9383 sill track (see 100CDG for more details) Size of panels limited to strength of meeting stiles Maximum Height: 2700 Maximum Width: 2000 Maximum weight per leaf: 250kg C x 20 support channel under stiles,m25 x 12 fixing bracket C9383 C9380 CH9595 Subsill support block shortened to suit C9383 C9383 C x 20 support channel under stiles,m25 x 12 fixing bracket C CH9595 Subsill support block shortened to suit C9379 CH9550 flat infil Subsill base shortened to V groove (90mm) 186 EDGE Architectural Glazing Systems: MAX Technical Manual, January
7 CH Panel = Frame Height part subsill CH9583 Tandem Roller assembly CH9550 Flat Infil CH9595 Subsill support bracket Adaptable to all U-MAX Framing Systems Primary Track usually fitted internally Single or multiple stacking tracks Suited to cavity door applications Track cover removable in all configurations for adjustment Used with C9383 sill track (see 100CDG for more details) Size of panels limited to strength of meeting stiles Maximum Height: 2700 Maximum Width: 2000 Maximum weight per leaf: 250kg Panel height must not exceed 2.5 times panel width as the panel can be unstable - use top hung door instead Panel = Frame Height part subsill CH9583 Tandem Roller carriage CH9550 Flat Infil CH9595 Subsill support bracket 32 Stile = Frame Height Thermal Separator 216 CH9595 Subsill support block shortened to suit CH9583 Tandem Roller carriage EDGE Architectural Glazing Systems: MAX Technical Manual, January
8 Type XO SP350 Striker box Thermal Separator CH9520 Seal CSK Type 2 Screw C970 C970 C9386 PB69550-P Weatherpile PS-11 Weatherpile C Type XXO C970 C9386 PB850-3P weatherpile CAS29 Meeting Stile Adaptor Both sides CSK Type 2 screw Thermal Separator C970 SP350 Striker box The details shown are applicable to both the top hung and bottom sliding tracks Size of panels limited to strength of meeting stiles Maximum Height: 2700 Maximum Width: 2000 Maximum weight per leaf: 250kg Panel height must not exceed 2.5 times panel width as the panel can be unstable - use top hung door instead 1 EDGE Architectural Glazing Systems: MAX Technical Manual, January
9 Type XXO 9 C970 C9386 Thermal Separator SP350 Striker box C970 C970 Thermal Separator C970 C The details shown are applicable to both the top hung and bottom sliding tracks Size of panels limited to strength of meeting stiles Maximum Height: 2700 Maximum Width: 2000 Panel height must not exceed 2.5 times panel width as the panel can be unstable - use top hung door instead Maximum weight per leaf: 250kg 189 EDGE Architectural Glazing Systems: MAX Technical Manual, January
10 10 Pocket Glazed Glazing Details These stile have a 30mm deep pocket which allows 12mm edge cover on IGU's. The detail below shows CH98 heel & toe block placement. Heel & Toe block fixed to lock side. Lower block fitted with glass in situ. 1. Install glass, angling into hinge side of panel, then centering. 2. Push glass full height in rebate and support with nom 15mm setting blocks below 3. Use 12mm segments of CH98, place in stile below glass. Push up side of stile behind glass to brace against glass. 5. Place 6mm setting blocks at bottom, and top to complete blocking of door. Wedge glazing charts for U-MAX Commercial Doors Max Commercial Door 3 Glass thickness 2mm 25mm 26mm 27mm 28mm Bead 6/12/6 6.38/12/6 8/12/6 8.38/12/6 8/12/8 Rebate wedge CH9502 CH9502 CH9501 CH9501 CH9500 Gap 5mm 5mm mm mm 3mm Glazing wedge CH9502 CH9502 CH9501 CH9501 CH9500 Gap 5mm 5mm mm mm 3mm With glass in situ, Fit 12mm segments of CH98 block into hinge side and slide up to brace glass. Fix CH98 block on lock side, approx 100mm from top of door light. 190 EDGE Architectural Glazing Systems: MAX Technical Manual, January
Commercial Doors. Overview 288 Commercial Doors 290. Commercial Doors
7 Commercial Doors Overview 288 Commercial Doors 290 Commercial Doors 7 Commercial Doors Overview Design Objectives Bi-fold Doors Commercial Doors offer a range of design styles to suit many applications.
More information889 High Performance Sliding Door
889 High Performance Sliding Door Doors Features Robust construction High performance weathering capabilities Low air infiltration Adjustable height tandem rollers Accepts commercial locks Dry glazed Security
More informationAluminium Sliding Door System
Aluminium Sliding Door System This system focuses on modern, sharp lines which are the result of the small radii achieved in the design of the aluminium sections. It allows designers to create distinctive
More informationWHY CHOOSE OMEGA RESIDENTIAL JOINERY
WHY CHOOSE OMEGA RESIDENTIAL JOINERY CONTENT 4 8 14 18 20 301 Series Awning Windows 309 Series Hinged Doors 313 Series Bi-fold Doors and Windows 303 Series Sliding Windows and 311 Series Sliding Doors
More informationThermal Doors & Frames for Custom Hardware Application. Item Page Unit List Price/ Total Description No. Qty. Unit List
Thermal Doors & Frames for Custom Hardware Application Pricing Example C1.1 Page 1 Note: See Section C2 for Standard Door & Frame Hardware Items. Finish: Doors: Bronze (DB) 4" Medium Stile 10" Bottom Rails
More informationU.S. ALUMINUM 3025 SERIES SLIDING DOORS
U.S. ALUMINUM 3025 SERIES SLIDING S 83 83 1/8" 40" 72" 71 1.1 1.5 1.3 1.7 1.8 1.9 (BEYOND) TESTED TO AAMA LC25 ACCOMODATES 1" (25mm) AND 1 (32mm) GLAZING OPTIONAL THERMALLY BROKEN HEAD AND JAMB CHANNELS
More information190/350/500 STANDARD ENTRANCES
APRIL, 2012 190/350/500 STANDARD ENTRANCES FEATURES 1 Features 190 narrow stile has 2-1/8" vertical stile, 2-1/4" top and 3-7/8" bottom rail 350 medium stile has 3-1/2" vertical stile, 3-1/2" top and 6-1/2"
More information350/500 Heavy Wall TM Entrances 1
350/500 Heavy Wall TM Entrances 1 FEATURES Features 350 medium stile has 3-1/2" (88.9) vertical stile, 3-1/2" (88.9) top and 6-1/2" (165.1) bottom rail 500 wide stile has 5" (127) vertical stile, 5" (127)
More information350/500 Tuffline TM Entrances 1
JANUARY, 2017 350/500 Tuffline TM Entrances 1 FEATURES Features 350 Tuffline TM has 3-1/2" (88.9) vertical stile, 3-3/8" (85.8) top and 6-3/4" (171.5) bottom rail 500 Tuffline TM has 5" (127) vertical
More informationFeatures and Benefits
Features and Benefits Max door panel weight is 75kg Max overall unit height is 2700mm Max door panel width is 900mm No drilling required for flushbolts or locking systems Concealed bottom channel for improved
More information2000T TERRACE DOOR. Features
AUGUST, 0 000T TERRACE DOOR FEATURES Features Performance class and grade: Single: AW-PG90-ATD Pairs: AW-PG45/65-ATD Inswing or outswing -/4" deep door rails and stiles Mitered door and frame corners Heavy
More information82" RO 81 1/4" FD 3/8" MIN JOINT 75 5/8" DLO 2 13/16" SERIES 8200 HORIZONTAL SLIDING WINDOW ELEVATION - BLOCK INSTALL 82" RO 81 1/4" FD
800 SERIES SPECIFICATIONS WINDOWS The Series 800 Horizontal sliding Window offers that rare combination of smooth operation, durability, and toughness. It has a 4-/" (4) deep frame designed to match typical
More informationsliding storefront systems
sliding storefront systems Table of Contents Sliding Storefront Systems (F) Sliding Storefront Systems (F) Table of Contents MS-360 Mall Slider Pricing Example page 2 MS-360 Mall Slider page 4 PW-180 Phantom
More information260/360/560 INSULCLAD ENTRANCES
FEBRUARY, 2011 260/360/560 INSULCLAD ENTRANCES FEATURES 1 Features 260 Insulclad has 2-11/16" vertical stile, 2-13/16" top and 4-7/16" bottom rail 360 Insulclad has 4-1/16" vertical stile, 4-1/16" top
More information400 Series Gliding Windows (1991 to Present)
400 Series Gliding Windows (1991 to Present) Parts Catalog Main Menu Section TOC Search What s in This Section Standard Windows................................................ Page 3 Parts Illustration...........................................................
More informationEXTRUDED ALUMINUM BALANCED DOORS AND ENTRANCES
WIKK INDUSTRIES, INC. MasterFormat 95 SECTION 08480 MasterFormat 04 SECTION 08 42 36 EXTRUDED ALUMINUM BALANCED DOORS AND ENTRANCES PART 1 GENERAL 1.1 DESCRIPTION A. Work included: Entrance and vestibule
More informationFlush Glaze-and Multiplane Frames. Standard Doors with. Fg Flush Glaze -1 3/4 x 4 1/2 Fg Flush Glaze -2 x 4 1/2
Standard Doors with Flush Glaze-and Multiplane Frames Fg-000 - Flush Glaze - / x Fg-000 - Flush Glaze - / x / Fg-000 - Flush Glaze - x / --OLDCASTLE (-) www.oldcastlebe.com p-fg-drfrm-sglact FG-000 - &
More informationKawneer Aluminium - Bifold Door
Features Thermally broken aluminium bifold door system From 1 to 7 panels in various configurations Slim sightlines, no floating mullions Inward or outward opening Standard fully weathered threshold 45mm
More information400 Series Gliding Windows (1991 to Present)
400 Series Gliding Windows (1991 to Present) Parts Catalog Main Menu Section TOC Search What s in This Section Standard Windows................................................ Page 3 Parts Illustration...........................................................
More information400 Series Gliding Windows (1991 to Present)
400 Series Gliding Windows (1991 to Present) Parts Catalog Main Menu Section TOC Search What s in This Section Standard Windows................................................ Page 3 Parts Illustration...........................................................
More informationReliance BlastMax Blast Resistant Curtain Wall Wet Glazed
Reliance BlastMax Blast Resistant Curtain Wall Wet Glazed Table of Contents (Drawing numbers ie H9601 used as CAD detail reference only ) Elev-RcwStrMax-Wet-Glz-TwnSpn H9601-Head-at-Vision H9602-Typical-Horizontal
More information350/500 TUFFLINE ENTRANCES 1
350/500 TUFFLINE ENTRANCES 1 FEATURES Features 350 Tuffline has 3-1/2" vertical stile, 3-3/8" top and 6-3/4" bottom rail 500 Tuffline has 5" vertical stile, 5" top and 6-3/4" bottom rail Door is 2" deep
More information1010C Sliding Mall Front
NOVEMBER, 2017 FEATURES 1 Features Interior sliding mall front with parallel stacking capability Multi-track or single track with flush or surface mounted tracks Stainless steel cap on sill track Heavy
More informationSECTION D. Bi-Folding Window and Door Hardware
SECTION D Bi-Folding Window and Door Hardware D SECTION D Bi-Folding Window and Door Hardware D7 D9 D11 D13 D15 D17 Twin Bolt Locksets Millton Bi-fold 2-Point Locksets Pinnacle Bi-fold Locksets Flush
More informationARCHITECTURAL HARDWARE 'ALL-GLASS' ENTRANCE AND STOREFRONT SYSTEMS HEAVY GLASS DOOR SYSTEMS STRUCTURAL GLASS FITTINGS
08-OPENINGS ARCHITECTURAL HARDWARE GLASS ENTRANCES AND STOREFRONTS 'ALL-GLASS' ENTRANCE AND STOREFRONT SYSTEMS HEAVY GLASS DOOR SYSTEMS S TA C K I N G P A R T I T I O N S Y S T E M C O M M E R C I A L
More informationRolling & Wardrobe Doors
Rolling & Wardrobe Doors For over 50 years the Stylmark rolling door has been recognized as the finest in the industry. These doors move effortlessly at the touch of a finger, while adding security to
More information24" DLO 24" DLO 1 1/2" 1 1/2" 1 1/2" 1 1/2" 1 1/2" " FRAME DIMENSION 34" DAYLITE OPENING 1/8" 85 1/2" FRAME DIMENSION 3 OPP 3.
SERIES 87-AR SINGLE AND DOUBLE BUTT HINGE HUNG DOORS W/ & W/O SIDELITE(S), W/ & W/O TRANSOM SHOWN WITH OPTIONAL CRL WOOD FLUSH DOOR SYSTEM DESIGNED TO WRAP -7/8" ( MM) WALLS DESIGNED FOR TOP LOAD GASKETS
More informationEXTRUDED ALUMINUM TEMPERED GLASS BALANCED DOORS AND ENTRANCES
WIKK INDUSTRIES, INC. MasterFormat 95 SECTION 08480 MasterFormat 04 SECTION 08 42 36 EXTRUDED ALUMINUM TEMPERED GLASS BALANCED DOORS AND ENTRANCES PART I GENERAL 1.1 DESCRIPTION A. Work included: Entrance
More informationSentinel Single Hung Window 110
Available Finishes: White & Bronze Standard Glass Colors: Clear, Gray, Dark Gray (Turtle Code), Bronze, Solexia Green, Azuria Blue, White Interlayer, Mist (Pattern 62), Rain Sentinel Single Hung Window
More informationCRL PREMIUM SERIES BALANCED DOOR
C.R.LAURENCE CO. ARCHITECTURAL PRODUCTS ISO9000 COMP AN Y BUILDING GLASS RAILING SYSTEMS SAFER STRONGER WITH BRILLIANT TRANSPARENCY BALANCED OR ALUMINUM CLAD WITH EXPOSED SHAFT AND POWER OPERATORS Revisions
More informationHigh performance, architecturally styled systems for designer residential applications
D E S I G N E R S E R I E S D E S I G N E R S E R I E S T h e r m a l H E A RT High performance, architecturally styled systems for designer residential applications Thermally broken aluminium window and
More informationHopper and Drive Components
Fisher Engineering 50 Gordon Drive, Rockland, Maine 04841 213 www.fisherplows.com 8001 1, 8004 1, 800 1 January 1, 201 Lit. No. 54, Rev. 02 Hopper and Drive Components POLY CASTER Hopper Spreader Parts
More informationCRL PREMIUM SERIES BALANCED DOOR
C.R.LAURENCE CO. ARCHITECTURAL PRODUCTS CE RT F I E D ISO9000 COMP AN Y BUILDING GLASS RAILING SYSTEMS SAFER STRONGER WITH BRILLIANT TRANSPARENCY I BALANCED OR ALUMINUM RAIL & STILE WITH EXPOSED SHAFT
More informationSystem Test Report Fitness for Use and Durability
System Test Report Fitness for Use and Durability No. 101 29257e This is a translation of System Test Report No. 101 29257 dated 22 February 2006. Client Product/Component aluplast GmbH PVC-profiles Auf
More informationAluminum Wood Double-Hung Windows
Replacement Parts Table of Contents Exploded View... 38 Parts List... 39 Liners and Stops... 40 --- 41 Picture Glass Bead and Cutting Schedule... 41 Picture Glass... 42 --- 43 Sash Assembly... 44 --- 47
More informationEURO VISTA FOLD. Approved for use in Miami-Dade HVHZ Zones Florida Building Code Approved Product Approval FL FOLDING SLIDING STACKING PIVOT
EURO VISTA FOLD IMPACT RATED Aluminum FOLDING Doors Approved for use in Miami-Dade HVHZ Zones Florida Building Code Approved Product Approval FL 17838 www.euro-wall.com 888.989.EURO (3876) FOLDING SLIDING
More informationTS19 AA OVERVIEW. Glazing: Weight: Each panel weighs approximately 7to 8 lbs per sq ft depending on overall panel size.
0 TS9 AA OVERVIEW TECHNICAL INFORMATION The Panda TB Lift and Slide door system is custom made to order and has been designed specifically for use in climates where thermal insulation and U-factor is of
More information5820 / 5920 SERIES DOOR
5820 / 5920 SERIES DOOR Center Glazed Offset Glazed Side Load Top Load WALL-SLIDING PATIO DOOR SYSTEM Montauk, NY Bates Masi Architects MULTIPLE CONFIGURATIONS AVAILABLE X X X Multi Panel Thermal Non-Thermal
More informationPage 1 Monumental Blank Entrances Applied Hardware & Preps, Tubelite Standard Hardware
Page 1 Monumental Blank Entrances Applied Hardware & Preps, Tubelite Standard Hardware Butt Hinges Pivots Pull Handles/Push Bars Heavy Duty P094 Mortised Butt Hinge P094MD P094MF (includes P2093 $ 123
More informationBIFOLD DOOR TRACK, SLIDING DOOR TRACK, HARDWARE AND ACCESSORIES, POCKET DOOR FRAMES
Track and Hardware Specialists TRACK AND HARDWARE FOR COMMERCIAL AND RESIDENTIAL DOOR APPLICATIONS BIFOLD DOOR TRACK, SLIDING DOOR TRACK, HARDWARE AND ACCESSORIES, POCKET DOOR FRAMES KrisTrack Full Line
More informationS6100 SERIES REVERSIBLE PANIC/FIRE EXIT RIM DEVICES INSTALLATION INSTRUCTIONS
801 Avenida Acaso, Camarillo, Ca. 93012 (805) 494-0622 www.sdcsecurity.com E-mail: service@sdcsecurity.com S6100 SERIES REVERSIBLE PANIC/FIRE EXIT RIM DEVICES INSTALLATION INSTRUCTIONS These instructions
More informationEXPLODED VIEWS & PARTS PARTS LIST EVPL-07
EXPLODED VIEWS & PARTS PARTS LIST EVPL-07 Effective September, 2007 record-usa 4324 PHIL HARGETT COURT (280) POST OFFICE BOX 3099 MONROE, NC 28-3099 USA 704-289-922 800-438-937 WATS 704-289-2024 FAX EXPLODED
More informationCANADA POST DELIVERY TRUCK. Labor Time Guide
CANADA POST DELIVERY TRUCK Labor Time Guide 1801 S. Nottawa Street Sturgis, MI 49091 Phone 800-233-4823 Fax (616-659-0499) www.morganolson.com www.morganolsonparts.com Page Table of Contents 3 Hood &
More informationGLASS TRACK SYSTEMS 10mm Glass Track 6mm Glass Track Sashless window track Cabinet track
GLASS TRACK SYSTEMS 10mm Glass Track 6mm Glass Track Sashless window track Cabinet track Sashless window 6mm Roller bearing do 21kg per panel 1.40m 2 1220mm Opening height - 22mm Half opening width + 25mm
More informationGrant Folding Door Sets for Light, Medium and Heavy duty Doors
Grant Folding Door Sets for Light, Medium and Heavy duty Doors www.grantdoorhardware.com Light Duty Folding Door Set Wing Line Grant 1500 up to 25 lbs/door (11 kg/door) for door thickness w (19 mm) minimum,
More informationCENTER-HUNG MEDIUM STILE SERIES 400 DOOR TYPICAL ELEVATION CENTER-HUNG MEDIUM STILE SERIES 400 DOOR ADA COMPLIANT ELEVATION
C.R.LAURENCE CO. ARCHITECTURAL PDUCTS CE RT F I E D ISO9000 COMP AN Y BUILDING GLASS RAILING SYSTEMS SAFER STNGER WITH BRILLIANT TRANSPARENCY I OR SYSTEM Revisions By: 1 1 FOR 1/4" OR 1" GLAZING 8 3 MEDIUM
More informationAdams rite. Exit Devices & parts exit devices series exit device parts
Adams rite Exit Devices & parts exit devices 8099 8211 8099 Active Dummy Bar with Switch Can be wired normally open or normally closed to operate maglock, alarm, etc No latching mechanism 8211 Surface
More informationCENTER-HUNG WIDE STILE SERIES 550 DOOR TYPICAL ELEVATION CENTER-HUNG WIDE STILE SERIES 550 DOOR ADA COMPLIANT ELEVATION
C.R.LAURENCE CO. ARCHITECTURAL PRODUCTS CE RT F I E D ISO9000 COMP AN Y BUILDING GLASS RAILING SYSTEMS SAFER STRONGER WITH BRILLIANT TRANSPARENCY I OR SYSTEM Revisions By: 1 1 FOR 1/4" OR 1" GLAZING 8
More informationspecialty entrances Table of Contents Specialty Entrances (C)
specialty entrances Table of Contents Specialty Entrances (C) Specialty Entrances (C) Table of Contents Entrance Door Handing page 2 Catalog Description Key page 3 Door Nomenclature page 3 Glass Entrance
More informationFENSTERTECHNIK BESTELLKATALOG WINDOW TECHNOLOGY ORDER CATALOG SECTION Tilt&Turn Hardware UNI-JET SCF PVC
FENSTERTECHNIK BESTELLKATALOG WINDOW TECHNOLOGY ORDER CATALOG SECTION 06.2 Tilt&Turn Hardware UNI-JET SCF PVC Table of Contents 06.2 UNI-JET SCF PVC 06 2 DIRIGENT T&T Handle... 06.2.9 Tilt&Turn Sash...
More informationCONSTRUCTION CONSULTING LABORATORY, INTERNATIONAL
TEST REPORT: SERIES 8220 ALUMINUM SINGLE HUNG WINDOW Prepared for: 5625 E. Firestone Boulevard South Gate, CA 90280 1601 Luna Road S-UNITED, INC. Office: (972) 242-0556 Carrollton, Texas 75006 A Quality
More informationOPERATION AND MAINTENANCE MANUAL
OPERATION AND MAINTENANCE MANUAL Contents Introduction Comar 5P.i. Tilt & Turn Windows, Operation & Maintenance Comar 5P.i. & Comar 5P.i. ECO Casement Windows, Operation & Maintenance Comar 5P.i. Vertical
More informationA70 ARCADE ENDFOLD & CENTREFOLD FOLDING DOORS ALUMINIUM SECTIONS BOTTOM ROLLER TIMBER DOORS
CI/SfB (31.54) Xt7 A R C A D E ENDFOLD & CENTREFOLD A70 E A C H D O O R W E I G H T M A X 7 0 k g ISSUE 1 ARCADE FOLDING DOORS ALUMINIUM SECTIONS BOTTOM ROLLER TIMBER DOORS H E N D E R S O N APPLICATION
More information1000/1200 Service Manual. 4j.1 - Vertical Stacker Main Chassis. Page 4j-1. SENSORS Item Description Part No. Wiring S1 Entry TX*
Page 4j-1 5 Feb 2012 SENSORS Item Description Part No. Wiring S1 Entry TX* 182-443 5.49 *See section 4j-8 for corresponding RX 4j.1 - Vertical Stacker Main Chassis Page 4j-1 Page 4j-2 1 Mar 2012 4j.1 -
More informationASTRO ATS-12 TABBER PARTS MANUAL
ASTRO ATS-12 TABBER PARTS MANUAL This manual is intended solely for the use and information of Astro Machine Corp., its designated agents, customers, and their employees. The information in this guide
More informationSINGLE SLIDING WINDOW 1000 SERIES 4-1/2" FRAME SINGLE SLIDER LIFT OUT
PERFORMANCE EVALUATION OF SINGLE SLIDING WINDOW 1000 SERIES 4-1/2" FRAME SINGLE SLIDER LIFT OUT For Dominion Doors & Windows Ltd. IN ACCORDANCE WITH: AAMA/WDMA/CSA 101/I.S.2/A440-11 AND A440S1-17 Report
More informationHopper and Drive Components
Western Products, PO Box 2508, Milwaukee, WI 522-958 www.westernplows.com January 15, 2016 Lit. No. 99755, Rev. 00 Hopper and Drive Components Tornado Hopper Spreader Parts List This Parts List is for
More informationsize limitations (In inches) Minimum Size Maximum Size modular Sizes (In inches) commodity Sizes (In inches) Performance Results
238 casement window Industry leading casement with design pressures up to +110/-195 PSF, Ogee glazing beads and muntins, standard stainless steel package, multipoint locks and matching sightlines to the
More informationSRD Design CORPORATION. Fenestration Specialists!
SRD Design CORPORATION Fenestration Specialists! Series 5000 By Champion Window & Door Syosset, New York Design by: SRD Design 2002 SRD Design CORPORATION ENGINEERING ENGINEERING SPECIALISTS DIVERSITY
More informationAriel Sliding Patio Doors
Ariel Sliding Patio Doors REPLACEMENT PARTS CATALOG 2-Panel Unit... 2 3-Panel Unit... 4 4-Panel Unit... 6 Screens... Back Cover Unit Sizes... Back Cover Notice: The replacement parts shown herein are for
More informationHopper and Drive Components
Fisher Engineering 50 Gordon Drive, Rockland, Maine 04841 2139 www.fisherplows.com 78001 1, 78004 1, 78007 1 November 1, 2017 Lit. No. 99754, Rev. 04 Hopper and Drive Components POLY CASTER Hopper Spreader
More informationCOM006 Threshold C/Anodised 6.5m. COM206 Threshold C/Anodised 6.5m. COM007 Threshold C/Anodised 6.5m. COM008 Threshold C/Anodised 6.
INDEX Threshold / Subsills / Packers 1 Stainless Steel Screws / Shopfront Hinges 2 Partition Hinges 3 Miscellaneous Hinges 4 Commercial Mortice Lock 5 Lockwood Commercial Lock 6-7 Lockwood Commercial Lever
More informationGlass & Wooden Door Fittings
Glass & Wooden Door Fittings Product range: Door Sliders Door Track Plastic Glass Clamps Glass Door Channel Aluminium Glass Door Channel Plastic Glass Door Hinges Glass Door Locks Glass Sliding Door Systems
More informationWA67 Folding System - Aluminum Clad Over Wood
TABLE OF CONTENTS WA67 WA67 Folding System - Aluminum Clad Over Wood Features.......................................................................................................................... 1
More informationTHERMALSTEEL WINDOWS & DOORS STRENGTH STYLE PERFORMANCE
THERMALSTEEL WINDOWS & DOORS STRENGTH STYLE PERFORMANCE 1 Slender lines and minimal profiles give a lightness to our Thermal Steel Windows and Doors, creating a minimalist aesthetic and powerful architectural
More informationIndustrial and Stainless Steel Track and Hardware Pg 53. Straight Sliding Industrial wood. Door Hardware metal
Contents Introduction to P C Henderson Pg 2 Commercial Straight Sliding Systems Pg 3 Husky Husky Pacer Pacer Flexirol Commercial Folding Systems Pg 4 Husky Pacer Centerfold Pacer Endfold Pacer Endfold
More informationAMS TS66 ENERGY REBATED DOOR SYSTEM - SPECIFICATION
AMS TS66 ENERGY REBATED DOOR SYSTEM - SPECIFICATION 3.3.01 C: Profile listing, frame, sash and mullions. 3.3.02 C: Profile listing adapters and cills. 3.3.03 C: Accessories. 3.3.04 F: Accessories. 3.3.05
More informationAutomatic Entrance Systems
Automatic Entrance Systems WINNER LAING O ROURKE CONSTRUCTION NORTH INNOVATION AWARD 2015 WINNER IHEEM PRODUCT INNOVATION AWARD 2015 WINNER BBH BEST INTERNAL PRODUCT AWARD 2015 WINNER EUROPEAN HEALTHCARE
More information100 Series Awning Windows (2008 to Present)
100 Series Awning Windows (2008 to Present) CCParts Catalog Main Menu Section TOC Search What s in This Section Standard and Custom Windows...................................... Page 3 Parts Illustration...........................................................
More informationAurora Door Concepts Practicality in Design
urora Door oncepts Practicality in Design riterion Industries Northcorp Industry Park 15 orporate Place roadmeadows Victoria 3047 Telephone 03 9355 0700 Facsimile 03 9355 0777 sales@criterionindustries.com.au
More informationcero by NanaWall The Minimal Framed Large Panel Sliding Glass Wall
INTRODUCTION CERO BY NANAWALL cero by NanaWall The Minimal Framed Large Panel Sliding Glass Wall cero is the minimal framed large panel sliding glass wall by NanaWall Systems. Simple in form yet engineered
More informationHardware Solution for Windows
Hardware Solution for Windows Turn-Tilt Fittings Style 180 Turn-Tilt Fittings Standard Turn-Tilt Fittings Heavy Duty Dual Turn-Tilt Fitting Opening Restrictor Handle controlled opening arrester Wilh. Schlechtendahl
More informationHardware Solution for Windows
Hardware Solution for Windows Turn-Tilt Fittings Style 180 Turn-Tilt Fittings Standard Turn-Tilt Fittings Heavy Duty Dual Turn-Tilt Fitting Opening Restrictor Wilh. Schlechtendahl & Söhne GmbH & Co. KG
More informationSeries 6000 XT - Thermal Storefront 2 x 6-1 Glass
Series 6000 XT - Thermal Storefront 2 x 6-1 Glass Table of Contents (Drawing numbers ie H9303 used as CAD detail reference only ) Elev-Series-6000 XT-CenterSet H9301-Horizontal H9302-Head H9303-Sill H9319-Horiz-w-Opwin
More informationPerma-Shield Gliding Patio Doors
Casement Perma-Shield & Awning Gliding Patio Windows Doors 400 Casement Awning Windows & CUSTOM SIZING! in 1/8 increments. SECTION REFERENCE Table of Basic Unit Sizes 220 Opening Specifications 221 Basic
More informationINSTALLATION GUIDE DH MAX RACK SINGLE SIDE Marcedes Sprinter ( Standard & High Roof )
INSTALLATION GUIDE 1820-DH MAX RACK SINGLE SIDE Marcedes Sprinter ( Standard & High Roof ) ORDER OF OPERATION BILL OF MATERIALS Crossbows ( 15-1806 ) Operation 1 Passenger Side Mechanism ( 15-1810 ) Operation
More informationSingle action, hinged
PY 55 DOOR Single action, hinged Applications: Single action Single or double door leaf Composite frames 2 Single and double action anti finger trap pivot Applications: Single action, bulb stile Double
More information9530 Series Senior Swing. Features. Special Templates. Fasteners Mounting. Certifications
Features The 9530 SENIOR SWING by LCN is an ADA door operator that is a two-in-one swing door operator. SENIOR SWING operators when activated, opens doors automatically for wheelchair access, yet allows
More information81870 Alside_24667 Alside 11/3/16 5:01 PM Page 2 80 Series
80 Series Alpine s 80 Series is the ultimate in vinyl window technology. Our heavy-duty vinyl frames combined with 1" insulated, Low-E glass, make these windows some of the most energy-efficient produced.
More informationHARDWARE INVENTORY UPDATE
300001 400 Glazing Wedge 3mm Gap PVC 100 400 Glazing Wedge 3mm Gap PVC Roll 100m ROLL 300002 Glazing Wedge 5mm Gap PVC Roll 100 Glazing Wedge 5mm Gap PVC Roll 100m ROLL 300003 400 Glazing Wedge 7mm Gap
More informationFG-2000 Storefront - Center Set 1-3/4 x 4 1/2
FG-2000 Storefront - Center Set 1-3/4 x 4 1/2 Table of Contents (Drawing numbers ie H0501 used as CAD detail reference only ) Elev--Fg-2000-Storefront H0501-Horizontal-Outside Glaze H0502-Head-Horizontal
More informationPARALLEL STAY. Parallel Opening Hinge for Commercial Applications
PARALLEL STAY Parallel Opening Hinge for Commercial Applications Cotswold parallel hinges provide natural ventilation whilst maintaining aesthetically pleasing sightlines for modern façade design. Parallel
More informationV3 Series Awning Windows (2011 to Present)
What s in This Section Standard and Custom Windows...................................... Page 3 Parts Illustration........................................................... 3 Options- Exterior..................................................
More informationIllustrated Parts & Packing List & Instructions 815 Rice Lake Street, Owatonna, MN 55060
Illustrated Parts & Packing List & Instructions 815 Rice Lake Street, Owatonna, MN 55060 Great Plains Part #891-561C (Gandy Part #6245DS-GP) For Great Plains Turbo-Max 2400, 3000, 3500 & 4000 Models 45
More informationHardware PIVOTS/HINGES...2, 3 LOCKS/LATCHES EXIT DEVICES ACCESS CONTROL CLOSERS THRESHOLDS...22 PUSH/PULLS...
JANUARY, 2018 INDEX 1 PIVOTS/HINGES...2, 3 LOCKS/LATCHES... 4-7 EXIT DEVICES... 8-14 ACCESS CONTROL... 15-18 CLOSERS... 19-21 THRESHOLDS...22 PUSH/PULLS...23 LAWS AND BUILDING AND SAFETY CODES GOVERNING
More information4 DOOR SYSTEM ROOMFOLD DELUXE RANGE
ROOMFOLD DELUXE RANGE 3+1 Pattern 4 DOOR SYSTEM SYSTEM OVERVIEW 818 Top 605 Hanger 125 EQUAL Slave Daily Access 282HSS EQUAL Flush bolt on reverse side of door 150 802 Bottom 106 SSMF Guide TOOLS REQUIRED
More informationU-Factor, Solar Heat Gain Coefficient, Visible Transmittance and Condensation Resistance Calculation Report
U-Factor, Solar Heat Gain Coefficient, Visible Transmittance and Condensation Resistance Calculation Report REPORT NO: NCTL-110-14975-01 SIMULATION DATE: 03/25/13 REPORT DATE: 03/25/13 Client: Product
More informationPARALLEL STAY. Parallel Opening Hinge for Commercial Applications
PARALLEL STAY Parallel Opening Hinge for Commercial Applications Cotswold parallel hinges provide natural ventilation whilst maintaining aesthetically pleasing sightlines for modern façade design. Parallel
More information*ININST.1039* 2390 Touchbar
*ININST.1039* ININST.1039 Concealed Vertical Rod Panic Device 2390 Touchbar Installation Instructions Index Parts List... 2 Before Installation... 5 Installation... 5 RX Device Wiring... 12 EL Device Wiring...
More informationB o d y S t r u c t u r e
B o d y S t r u c t u r e Body Glass Glass replacement should meet standards in specification FMVSS 205 and 217. [Warning] When replacing broken or damaged glass, use extreme care at all times to prevent
More informationSLIDING & FOLDING DOOR SERIES ARCHITECTURAL HARDWARE
SLIDING & FOLDING DOOR SERIES ARCHITECTURAL HARDWARE 2003 2013 148 SLIDING DOOR FITTINGS SGSF-SGWS0 Silent Sliding Door Hanger Set *Pre order with minimum MOQ required Features For 1- and 2-leaf sliding
More informationEclipse C3 Aluminum Folding Door System. Dealer Brochure Exterior folding door systems
Exterior folding door systems www.eclipsearchitectural.com Eclipse C3 Aluminum Folding Door System Dealer Brochure 2012 Eclipse C3 Aluminum Folding Door System, C3 Fabricator to Dealer Brochure Revision
More informationPUSH BAR EXIT DEVICES CROSS BAR EXIT DEVICES NARROW STILE EXIT DEVICES FEATURING LCWD STRIKES... 20
Exit Devices Section TABLE OF CONTENTS EXIT DEVICES PUSH BAR EXIT DEVICES N1500 Heavy Duty Rim Exit Device N1550 Rim Exit Device... 6 N1650 Fire Rated Heavy Duty Exit Device N1700(F) Vertical Rod Heavy
More informationStocked Products. V17 - Issued 1st December PH: FAX: (Sales)
Stocked Products V17 - Issued 1st December 2016 PH: 02 96363300 FAX: 02 9631 1400 (Sales) Website: www.trangoaluminium.com.au Email: sales@trangoaluminium.com.au Unit 2 / 108 Toongabbie Road, Girraween,
More informationPARTS LIST. JOHNSON HARDWARE Manufacturing World Class Door Hardware Since 1958
PARTS LIST Bifold Hardware Multi-Fold Hardware Wall Mount Sliding Hardware Pocket Door Hardware Sliding Bypass Hardware Multi-Door Sliding Hardware JOHNSON HARDWARE Manufacturing World Class Door Hardware
More informationLift Slide Tracks, Thresholds, Gaskets and Interlocks.
Lift Slide Tracks, Thresholds, Gaskets and Interlocks. Products Pages Configurations, Sizes, Specs C-2 Bottom Tracks & Guides C-3 to C-4 FASTrack Systems C-5 to C-7 Thresholds C-8 to C-10 Top Tracks &
More informationDoor Closer Cycle. How to Select the Proper Closer. Things to Consider
Door Control Closer Spring Adjustment Not Shown in Door Closer Cycle Diagram Effects the entire cycle of the door closer movement Used to size closer for application requirements Determines the amount
More informationCENTER-HUNG NARROW STILE SERIES 250 DOOR TYPICAL ELEVATION CENTER-HUNG NARROW STILE SERIES 250 DOOR ADA COMPLIANT ELEVATION
C.R.LAURENCE CO. ARCHITECTURAL PDUCTS CE RT F I E D ISO9000 COMP AN Y BUILDING RAILING SYSTEMS SAFER STNGER WITH BRILLIANT TRANSPARENCY I OR SYSTEM Revisions By: FOR /4" OR " GLAZING 8 NARW VERTICAL STILE
More informationWindow Fittings Sliding/Folding Fittings
Folding window fitting Fold 35 Features For timber door frames For 2- to 6-leaf folding doors Floating suites possible Full corrosion resistant construction, ideal for coastal applications Concealed channel
More informationCOMMERCIAL HARDWARE. StAnLEy ARCHItECtuRAL HARDWARE
COMMERCIAL HARDWARE StAnLEy ARCHItECtuRAL HARDWARE STANLEY ARCHITECTURAL HARDWARE TABLE OF CONTENTS Page Company history...2 Nomenclature explanined...3 BiFold hardware...3 11 BF30...4 7 BF50...8, 9 BF125N...10,
More information