LTS31 AW OVERVIEW. Configurations: These systems can accommodate up to 5 panel per unit.

Transcription

1 0 OVERVIEW TECHNICAL INFORMATION Profiles: Profiles are manufactured from 6063-T5 extruded aluminum with a wall thickness of up to /8 allowing for oversized panels. The door systems are available with either powder coat, Kynar or anodized finishes in virtually any color the customer chooses. Tracking: There are five types of tracks available to accommodate any flooring conditions, allowing for an almost seamless look with only 3/6 protrusion above the finished floor. All weight is carried on the bottom track, the top track serves as a guide. Configurations: These systems can accommodate up to 5 panel per unit. Hardware: The wheel carriages are comprised of stainless steel wheels and have a corrosion resistant treatment applied for high performance in coastal regions. Each wheel carriage can support up to 550 lbs. The operating mechanism includes a multi-point lock with a flush handle. The entire door system has specially designed EPDM gaskets to create a totally closed, weather tight system. Weight: Each panel weighs approximately 7 to 8 lbs per sq ft depending on overall panel size and glass configuration. PROFILE: WIDTH: 2 3 8" MAX SIZE: WIDTH: 5'-0" HEIGHT: HEIGHT: 0'-0" THICKNESS: " AND 3 8"

2 02 TYPICAL CONFIGURATIONS TYPOLOGY CONFIGURATION WITH POCKETS (SYSTEM CAN STACK LEFT AND/OR RIGHT) 8 / 2 POCKET 4 / POCKET / POCKET 6 / 2 POCKET 5 / POCKET 4 / POCKET 4 / 2 POCKET 6 / POCKET 3 / POCKET CONFIGURATION WITH FIXED (SYSTEM CAN STACK LEFT AND/OR RIGHT)

3 03 SURFACE TRACK TRACK CONFIGURATION OPTION SETTING BLOCK FU0295 RAMP WHEEL OPTION 2 FIN GASKET CAP " 8" TALL CLIP SUB- OPTION " SUB- 4" TALL CLIP CAP 2 7 CAP OPTION 4 SUB- RAMP 5 2" SUB-

4 04 8" SURFACE TRACK TRACK CONFIGURATION OPTION SETTING BLOCK FU0295 RAMP WHEEL OPTION 2 8" FIN GASKET SUB TALL CLIP RAMP " OPTION 3 8" SUB- 5 4" TALL CLIP RAMP " SUB

5 05 4" RECESSED TRACK TRACK CONFIGURATION RECOMMENDED TRENCH WIDTH: TRACK : 3 5 8" WIDE 2 TRACK: 6 9 WIDE 3 TRACK: 9 2" WIDE 4 TRACK: 28" 3 WIDE 5 TRACK: 5 5 WIDE 2 3 8" SETTING BLOCK FU0295 WHEEL BOTTOM GASKET FIN GASKET 9 3 4" SUB 2" TRENCH 3 5 8"

6 4" RECESSED DRAINAGE TRACK TRACK CONFIGURATION RECOMMENDED TRENCH WIDTH: TRACK : 34" 3 WIDE 2 TRACK: 6 WIDE 3 TRACK: 9 5 8" WIDE 4 TRACK: 2 9 WIDE 5 TRACK: 5 7 WIDE SETTING BLOCK FU0295 WHEEL BOTTOM GASKET 2" 3 4" FIN GASKET SUB 2" TRENCH DRAIN PORT 4" 06

7 07 2 2" RECESSED TRACK RECOMMENDED TRENCH WIDTH: TRACK CONFIGURATION TRACK : 6 8" 3 WIDE 2 TRACK: 9 5 WIDE 3 TRACK: 2 4" WIDE 4 TRACK: 5 3 WIDE 5 TRACK: 8 8" WIDE SETTING BLOCK WHEEL FU0295 BOTTOM GASKET FIN GASKET " SUB TRENCH 2" 6 3 8" ANCHORS

8 08 2 2" RECESSED DRAINAGE TRACK RECOMMENDED TRENCH WIDTH: TRACK CONFIGURATION TRACK : 6 8 3" WIDE 2 TRACK: " WIDE 3 TRACK: 2 " WIDE 4 4 TRACK: " WIDE 5 TRACK: 8 " WIDE 8 SETTING BLOCK FU0295 WHEEL BOTTOM GASKET 2 2" 3 4" FIN GASKET SV925 SUB TRENCH DRAIN PORT 6 3 8" 2" ANCHORS

9 09 HEADER HEADER CONFIGURATION HEADER WIDTH: : 2 5 WIDE 2 S: 5 7 8" WIDE 3 S: 8 3 WIDE 4 S: 4" 3 WIDE 5 S: 4 WIDE 5 7 8" SHIM SPACE " INSUL BAR 5 8" HEADER 4 3 GLAZING CLIP GLAZING GASKET SETTING BLOCK

10 0 SIDE FRAME FRAME CONFIGURATION SIDE FRAME WIDTH: : 2 5 WIDE 2 S: 5 7 8" WIDE 3 S: 8 3 WIDE 4 S: 4" 3 WIDE 5 S: 4 WIDE LOCKING MECHANISM BRUSH GASKET 7 8" HANDLE 2" 5 7 8" 2 3 INSUL BAR CAP SIDE FRAME SHIM SPACE 2" UNIT WIDTH RO WIDTH

11 OVERLAP CONFIGURATION CAP BRUSH GASKET INTERLOCK SETTING BLOCK

12 2 BIPART BIPART CONFIGURATION HANDLE 6 7 GLAZING CLIP 2 3 8" GLAZING GASKET LOCKING MECHANISM SETTING BLOCK

13 3 POCKET INTERLOCK POCKET CONFIGURATION RECOMMENDED POCKET WIDTH: : 3 7 WIDE 2 S: 6 5 8" WIDE 3 S: 9 9 WIDE 4 S: 2 2" WIDE 5 S: 5 7 WIDE 4" POCKET BOARD POCKET BLOCK GLAZING CLIP 4" POCKET WIDTH 2 3 8" 2 5 POCKET BLOCK SETTING BLOCK 2" INTERLOCK SHIM BLOCK / UNIT WIDTH RO WIDTH 2" "

14 4 90 CORNER POST CORNER CONFIGURATION GLAZING GASKET GLAZING CLIP FU0295 HANDLE 3 4" POST 2 3 8" LOCKING MECHANISM 5 5 8" SETTING BLOCK