SERIES G603 STANDARD FRONT MOUNT GAGE

Transcription

1 LIQUID LEVEL GAGE -FRONT MOUNT, FLEXIBLE, CLEAR Economical, versatile and durably constructed. Available in mounting lengths to 600 inches (15240mm). Practical where oil level readings are necessary on cylindrical or irregular shaped reservoirs. Diesel fuel compatible sight is available, please specify. Minimum order may be required.! Aluminum end blocks and mounting bolts! Flexible vinyl sight offers 360 viewing! 150 F (65.6 C) maximum working temperature up to 5 PSI (34.5 kpa). GA603 BRASS ADAPTERS STD. GAT603 BRASS ADAPTERS STD. WHEN ORDERING, SPECIFY THE FOLLOWING, AFTER THE SEPARATING EACH WITH A DASH (-): BODY MATERIAL -A- Aluminum body (standard) -B- Brass body (optional) SEAL MATERIAL -4- Ethylene propylene seals (optional) PIPE SIZE - GA603, GAT603 ONLY -2-1/4-18 male pipe thread -3-3/8-18 male pipe thread -4-1/2-14 male pipe thread -5-3/4-14 male pipe thread STANDARD DUAL SCALE - GT, GAT ONLY -F- Fahrenheit scale (50 to 300 ) -C- Centigrade scale (10 to 150 ) GA A-1-3 3/8" NPTF Aluminum body 6.00 (152.40mm) centers Series GA603 A,B,C, DIMENSIONS ARE COMMON TO ALL GAGES FRONT MOUNT WITH PIPE ADAPTERS - SPECIFY PIPE SIZE G603 STANDARD FRONT MOUNT GAGE FRONT MOUNT WITH DIAL THERMOMETER AND PIPE ADAPTERS - SPECIFY PIPE SIZE GT603 FRONT MOUNT WITH DIAL THERMOMETER - DUAL SCALE GAGE # HERE AS PER ORDERING INSTRUCTIONS A- CENTERS B - SIGHT C - LENGTH 03 (76.20) 1.38 (35.05) 3.94 (100.08) 04 (101.60) 2.38 (60.45) 4.94 (125.48) 05 (127.00) 3.38 (85.85) 5.94 (150.88) 06 (152.40) 4.38 (111.25) 6.94 (176.28) 07 (177.80) 5.38 (136.65) 7.94 (201.68) 08 (203.20) 6.38 (162.05) 8.94 (227.08) 09 (228.60) 7.38 (187.45) 9.94 (252.58) 10 (254.00) 8.38 (212.85) (277.88) 11 (279.40) 9.38 (238.25) (303.28) 12 (304.80) (263.65) (328.68) D NPTF E F 1/ (14.22) 1.19 (30.23) 3/ (14.22) 1.12 (28.45) 1/2-14 3/ (19.05) 1.12 (28.45) LIQUID LEVEL GAGE - FRONT MOUNT FLEXIBLE, CLEAR 8/06 BULLETIN F327-3

2 BACK MOUNTING LIQUID LEVEL GAGES - WITH AND WITHOUT THERMOMETER A patented, economical closed circuit style liquid level gage similar to our G605, except that it is for installation where there is access to the inside of the tank. It offers minimum protrusion from the tank and because there are no bolt heads on the exterior face of the gage, it has a smooth, clean profile. The thermometer series gages have a protected sensing element that extends well into the tank - unaffected by ambient temperatures. Gages are furnished complete including O-ring seals and hex nuts for mounting. Mounting requires two.52 (13.21mm) dia. holes to match the gage mounting centers. Mounting studs accommodate all tank walls through.75 (19.05mm) thickness. For installations where gage is bolted to cylindrical tank wall, conical sleeves are available. Please specify when ordering. For gages (330.20mm) and greater see our G605 and G615 on Bulletin F327-5 / -15.! Borosilicate glass with redline on white background for distinct level reading and maximum fluid compatibility! See ENG. STD. 109 Use code letters Use code number for body material: for seal material: A - (standard) 1 - (standard) B - Brass gage body (optional) 2 - Butyl seals (optional) S - Steel gage body (optional) 3 - Viton A seals (optional) Y - Stainless Steel gage body 4 - Ethylene propylene seals (optional) (optional) 10- Neoprene seals (optional) First, specify series number, then mounting centers, then kind of metal, and finally seal material, separating each with a dash ( - ): G610 WITHOUT THERM. G620 WITH THERM. A - CENTERS B - SIGHT C - LENGTH G610 G (76.20) 1.50 (38.10) 4.62 (117.35) G610 G (101.60) 2.50 (63.50) 5.62 (142.75) G610 G (127.00) 3.50 (88.90) 6.62 (168.15) G610 G (152.40) 4.50 (114.30) 7.62 (193.55) G610 G (177.80) 5.50 (139.70) 8.62 (218.95) G610 G (203.20) 6.50 (165.10) 9.62 (244.35) G610 G (228.60) 7.50 (190.50) (269.75) G610 G (254.00) 8.50 (215.90) (295.15) G610 G (304.80) (266.70) (345.95) G610 - SIGHT ONLY G A (127.00mm) Centers G620 NOTE: The sight opening in all cases is 1.50 (38.10mm) less than mounting centers and overall length is 1.62 (41.15mm) greater than mounting centers. G620 WITH DIAL THERMOMETER BACK MOUNTING LIQUID LEVEL GAGES - WITH AND WITHOUT THERMOMETER 7/06 BULLETIN F / -20

3 LIQUID LEVEL GAGE - FRONT MOUNT, RIGID PLASTIC! Tough, break resistant, transparent rigid nylon sight offers wide angle viewing! Aluminum end blocks and mounting bolts! Maximum working pressure up to 125 PSI (861.9kPa) at 70 F (21.1 C)! Maximum working temperature up to 225 F (107.2 C)! Suitable for use with most hydraulic and machine lubricating oils. CAUTION: Transparent nylon is NOT recommended for use with: Diesel Fuel, Gasoline, Ethylene Glycol (antifreeze), Polyglycols, Ethyl Alcohol, Methyl Alcohol, Methyl Ethyl Ketone(MEK), Acetone, Isopropanol, Water at 194 F (90 C) and over, Steam boiler service. For these fluids, our BOROSILICATE sight glass should be specified. G613 GT613 GA613 SIGHT ONLY WITH THERMOMETER WITH PIPE ADAPTERS WHEN ORDERING, SPECIFY THE FOLLOWING AFTER THE, SEPARATING EACH WITH A DASH (-): -A- Aluminum body (standard) -B- Brass body (optional) -4- Ethylene Propylene seals (optional) -2-1/4-18 NPTF -3-3/8-18 NPTF -4-1/2-14 NPTF -5-3/4-14 NPTF GA A-1-3 3/8" NPTF Aluminum body 6.00 ( mm) mounting centers GA613 AVAILABLE TO MAXIMUM LENGTH OF ( mm) GAGE HERE, AS PER ORDERING INSTRUCTIONS OTHER AVAILABLE - MADE TO ORDER: MINIMUM ORDER MAY BE REQUIRED! Pipe adapters with thermometer - (Series GAT613)! Needle valves - 1/4 to 3/4 NPTF - (Series GNV613) THREAD OPTIONS AVAILABLE PER SPECIAL ORDER: *! 1/2-20UNF! 1/2-13UNC! 3/8-16UNC (Standard)! 3/8-24UNF! M12 x 1.75 A B -03 (76.20) 1.28 (32.51) -04 (101.60) 2.28 (57.91) -05 (127.00) 3.28 (83.31) -06 (152.40) 4.28 (108.71) -07 (177.80) 5.28 (134.11) -08 (203.20) 6.28 (159.51) -09 (228.60) 7.28 (184.91) -10 (254.00) 8.28 (210.31) -11 (279.40) 9.28 (235.71) -12 (304.80) (261.11) C 1/4-18 3/8-18 1/2-14 3/4-14 D.56 (14.22).56 (14.22).75 (19.05) E 1.19 (30.23) 1.12 (28.45) 1.12 (28.45) LIQUID LEVEL GAGE - FRONT MOUNT, RIGID PLASTIC 7/06 BULLETIN F327-13

4 LIQUID LEVEL GAGE - FRONT MOUNT, RIGID POLYMER LDI INDUSTRIES G623 series closed circuit liquid level gage is flush mounting, has a low profile and provides 180 viewing. This gage has a white insert strategically placed to provide a background for optimum fluid viewing. This economical gage is suitable for many applications that require maximum fluid level visibility. For gage with thermometer, see our Series GT623 on Bulletin F327-23B.! Tough, break resistant, transparent rigid polymer sight offers wide angle viewing! Steel, zinc plated mounting bolts! Black powder coated steel guard! Maximum working pressure up to 100 PSIG (689 kpa) at 70 F (21.1 C)! Maximum temperature up to 212 F (100 C)! Suitable for use with most hydraulic and machine lubricating oils. NOTE: Torque mounting bolts to 80 inch lbs. (9.04 N m). WITH OPTIONAL GUARD WHEN ORDERING, SPECIFY THE FOLLOWING AFTER THE, SEPARATING EACH WITH A DASH (-): M M12 x 1.75 bolts (optional) G Guard (optional) G PG-1C ½-13 UNC bolts, std Guard Polymer body, std 5.00 (127mm) std mounting centers G623 CAUTION: NOT RECOMMENDED FOR USE WITH: Alcohol or Steam condensate. For these fluids, our gages with BOROSILICATE sight glass and appropriate seals should be specified. LIQUID LEVEL GAGE - FRONT MOUNT, RIGID POLYMER 5/06 BULLETIN F327-23A

5 LIQUID LEVEL GAGE - FRONT MOUNT, RIGID POLYMER, CARD THERMOMETER LDI INDUSTRIES GT623 series closed circuit liquid level gage is flush mounting, has a low profile and provides 180 viewing. This gage has a red thermometer on a white insert with dual scales of 0 F (-20 C) to +220 F (+110 C). This economical gage is suitable for many applications that require maximum fluid level visibility and temperature monitoring. For gage without thermometer, see our Series G623 on Bulletin F327-23A.! Tough, break resistant, transparent rigid polymer sight offers wide angle viewing! Steel, zinc plated mounting bolts! Black powder coated steel guard!maximum working pressure up to 100 PSIG (689 kpa) at 70 F (21.1 C)!Maximum temperature up to 212 F (100 C)!Suitable for use with most hydraulic and machine lubricating oils NOTE: Torque mounting bolts to 80 inch lbs. (9.04 N m) WITH OPTIONAL GUARD WHEN ORDERING, SPECIFY THE FOLLOWING AFTER THE, SEPARATING EACH WITH A DASH (-): M M12 x 1.75 bolts (optional) G Guard (optional) GT PG-1C ½-13 UNC bolts, std Guard Polymer body, std 5.00 (127mm) std mounting centers GT623 CAUTION: NOT RECOMMENDED FOR USE WITH: Alcohol or Steam condensate. For these fluids, our gages with BOROSILICATE sight glass and appropriate seals should be specified. LIQUID LEVEL GAGE-FRONT MOUNT RIGID POLYMER, CARD THERMOMETER 5/06 BULLETIN F327-23B

6 LIQUID LEVEL GAGE - BACK MOUNT, DIAL THERMOMETER LDI INDUSTRIES G632 series closed circuit, dual purpose liquid level gage with a 1.38 (35.05mm) diameter dial probe thermometer, offers 270 viewing of fluid level and temperature. This gage is especially suited for mounting in areas where there is danger of the gage being damaged. The sight and dial probe thermometer are recessed well into the heavy bar stock body for maximum protection. Mounting requires two.52 (13.21mm) diameter holes spaced at 5.00 (127.00mm) centers. Mounting studs accommodate tank walls through.50 (12.70mm) thickness. Available with 5.00 (127.00mm) centers only.! Borosilicate glass with redline on white background for distinct level reading and maximum fluid compatibility! Maximum working pressure up to 125 PSI (861.9 kpa) at 150 F (65.6 C), no corrosion WHEN ORDERING, SPECIFY THE FOLLOWING, AFTER THE SEPARATING EACH WITH A DASH (-): -A- (standard) -4- Ethylene Propylene seals (optional) -5- Silicone seals (optional) G A-1 Series G632 with 5.00 (127.00mm) centers G632 PATENTED - 3 SIDES OPEN VIEWING LIQUID LEVEL GAGE - BACK MOUNT, DIAL THERMOMETER 5/07 BULLETIN F327-32

7 LIQUID LEVEL GAGE - FRONT MOUNT 270 VIEWING This series of liquid level gage was developed to meet the industries need for a rugged leakproof, wide angle viewing fluid level gage. The G635 series gage is similar to our G605 series gage, with the exception of a wider viewing window and more massive, heavy duty construction. An exclusive sealing arrangement provides a.06 (1.52mm) adjustment at each mounting bolt. The sight window is deeply recessed for maximum protection. Gages are furnished complete including spacer sleeves, tank to gage O-ring seals and hex nuts for mounting. This front mounting series can be installed in threaded openings and does not require access to the reservoir interior.! Borosilicate glass with redline on white background for distinct level reading and maximum fluid compatibility! See ENG. STD. 109 MODIFICATIONS AVAILABLE-MADE TO ORDER-CONSULT OUR FACTORY. (MINIMUM ORDER MAY BE REQUIRED) G635 - PATENTED - 3 SIDES OPEN VIEWING When ordering, specify the following after the series number, separating each with a dash (-): -A- (standard) -B- Brass gage body (optional) -4- Ethylene propylene seals (optional) -5- Silicone seals (optional) G A (127.00mm) mounting centers G635 A - CENTERS B - SIGHT C - LENGTH G (127.00) 3.50 (88.90) 6.62 (168.15) LIQUID LEVEL GAGE - FRONT MOUNT 270 VIEWING 5/06 BULLETIN F327-35

8 LIQUID LEVEL GAGE - BACK MOUNT, DUAL SCALE THERMOMETER LUBE DEVICES series G642 heavy duty, dual purpose closed circuit liquid level gages provide fluid level and temperature reading at a glance. Furnished as standard with a large recessed 2.00 (50.80mm) dia. dual scale dial probe thermometer for allowing easy viewing in elevated or inaccessible locations that must be viewed from a distance. Design includes a well protecting the sensing probe. Exclusive triple sight exposure offers wide angle viewing of fluid level. Maximum sight protection is provided by the precision machined bar stock body.! Borosilicate glass with redline on white background for distinct level reading and WHEN ORDERING, SPECIFY THE FOLLOWING AFTER THE, SEPARATING EACH WITH A DASH (-): -A- (standard) -B- Brass gage body (optional) -S- Steel gage body (optional) -Y- Stainless steel gage body (optional) -4- Ethylene propylene seals (optional) -5- Silicone seals (optional) G A (127.00mm) centers Series G642! Maximum working pressure up to 125 PSI (861.9 kpa) at 150 F (65.6 C), no corrosion. maximum fluid compatibility G642 PROTECTED SIGHT 270 SIGHT VIEWING A - CENTERS B - SIGHT C - LENGTH G (127.00) 3.50 (88.90) 6.62 (168.15) MODIFICATIONS AVAILABLE MADE TO ORDER - CONSULT OUR FACTORY (MINIMUM ORDER MAY BE REQUIRED) LIQUID LEVEL GAGE-BACK MOUNT, DUAL SCALE THERMOMETER 3/05 BULLETIN F327-42

9 LIQUID LEVEL GAGE-FRONT MOUNT, DIAL PROBE THERMOMETER IN WELL This gage can be installed from the front of the reservoir when wall is heavy enough to tap unf thread or from the inside to tighten nuts. Exclusive design with a well protecting the sensing probe - allows removal of thermometer without loss of fluid. Easy reading dual scale dial thermometer has probe extending deep into reservoir and is not affected by ambient temperatures. Furnished complete - ready for installation. All O rings and hex nuts included. Available to ( mm) mounting centers per special order.! Borosilicate glass with redline on white background for distinct level reading and maximum fluid compatibility! See ENG. STD. 109 WHEN ORDERING, SPECIFY THE FOLLOWING AFTER THE, SEPARATE EACH WITH A DASH (-). SELECT MOUNTING CENTERS (76.20mm) TO (304.80mm) AVAILABLE FROM STOCK. G645 PATENTED -A- (standard) -B- Brass gage body (optional) -S- Steel gage body (optional) -Y- Stainless steel gage body (optional) -4- Ethylene propylene seals (optional) -5- Silicone seals (optional) G A (254.00mm) centers Series G645 G645 A - CENTERS B - SIGHT C - LENGTH 05 (127.00) 3.50 (88.90) 6.62 (168.15) 08 (203.20) 6.50 (165.10) 9.62 (244.35) 10 (254.00) 8.50 (215.90) (295.15) 12 (304.80) (266.70) (345.95) MODIFICATIONS AVAILABLE MADE TO ORDER - CONSULT OUR FACTORY (MINIMUM ORDER MAY BE REQUIRED) LIQUID LEVEL GAGE-FRONT MOUNT DIAL PROBE THERMOMETER IN WELL 4/03 BULLETIN F LUBE DEVICES, INC NAGLE AVE., P.O. BOX 1810, MANITOWOC, WI PHONE: (920) FAX: (920) sales@lubedevices.com WEBSITE:

10 FRONT MOUNTING LIQUID LEVEL GAGES - WITH AND WITHOUT THERMOMETER A patented dual purpose closed circuit style liquid level gage that provides both instant and positive visual check of fluid levels and temperature in either hydraulic or oil reservoirs. Maximum sight protection is provided by the heavy precision machined bar stock body. Thermometer series gages have a protected sensing element that extends well into the tank - unaffected by unrelated ambient temperature. Gages are furnished complete including O-ring seals and hex nuts for mounting. A.06 (1.52mm) alignment adjustment at each stud facilitates mounting. This gage can be installed from the outside on 1/2-20UNF tapped holes when reservoirs do not have access to the interior and tank wall thickness permits tapping. For installations where gage is bolted to cylindrical tank wall, conical sleeves are available. Please specify when ordering. Front mounting gages can be made to order with mounting centers up to ( mm) in 1.00 (25.40mm) increments. Stainless steel dial thermometer: 1.38 (35.05mm) dia. dual scale Fahrenheit (50 to 300 ), Centigrade (10 to 150 ). For back mount gages see our G610 and G620 on Bulletin F327-10/-20.! Borosilicate glass with redline on white background for distinct level reading and maximum fluid compatibility! See ENG. STD. 109 Use code letters for body material: Use code number for seal material: A - (standard) 1 - (standard) B - Brass gage body (optional) 2 - Butyl seals (optional) S - Steel gage body(optional) 3 - Viton A seals (optional) Y - Stainless Steel gage body 4 - Ethylene propylene seals (optional) (optional) 10- Neoprene seals (optional) First, specify series number, then mounting centers, then kind of metal, and finally seal material, separating each with a dash (-): G605 WITHOUT THERM. G615 WITH THERM. A - CENTERS B - SIGHT C - LENGTH G605 G (76.20) 1.50 (38.10) 4.62 (117.35) G605 G (101.60) 2.50 (63.50) 5.62 (142.75) G A (127.00mm) Centers G615 G605 G (127.00) 3.50 (88.90) 6.62 (168.15) G605 G (152.40) 4.50 (114.30) 7.62 (193.55) G605 G (177.80) 5.50 (139.70) 8.62 (218.95) G605 G (203.20) 6.50 (165.10) 9.62 (244.35) G605 G (228.60) 7.50 (190.50) (269.75) G605 G (254.00) 8.50 (215.90) (295.15) G605 G (279.40) 9.50 (241.30) (320.55) G605 G (304.80) (266.70) (345.95) G605 - SIGHT ONLY NOTE: The sight opening in all cases is 1.50 (38.10mm) less than mounting centers and overall length is 1.62 (41.15mm) greater than mounting centers. Gages with (330.20mm) and greater mounting centers are furnished with spacer sleeves to space gage from tank allowing for bowing of the tank wall in larger reservoirs. Center mounting kits are furnished with gages ( mm) and greater mounting centers. G615 WITH DIAL THERMOMETER FRONT MOUNTING LIQUID LEVEL GAGES - WITH AND WITHOUT THERMOMETER 7/06 BULLETIN F327-5 / -15

11 LIQUID LEVEL GAGE - FRONT MOUNT, CARD THERMOMETER Low profile body with wide sight openings is machined from extruded aluminum bar stock NOT a composite of a stamping and molded plastic parts. Gage may be mounted from front if reservoir wall is heavy enough to tap for mounting bolt. Otherwise use nuts furnished on 1/2-20 and 1/2-13 mountings to tighten on interior wall of reservoir. Furnished complete with all O-ring seals and nuts. A.06 (1.52mm) alignment adjustment at each end facilitates mounting (76.20mm) centerline gage has 60 F (15.6 C) to 180 F (82.2 C) thermometer scale, 5.00 (127.00mm) and longer centerline gage has 0 F to 220 F (104.4 C) thermometer scale.! Crystal clear borosilicate sight for maximum fluid compatibility and will not discolor with time or temperature! Maximum working pressure up to 20 PSI (137.9 kpa) at 150 F (65.6 C), no corrosion BUNA N SEALS CATALOG G A-1 G A-1 G A-1 G A-3 G A-3 G A-3 A CENTERS 3.00 (76.20) 5.00 (127.00) (254.00) B SIGHT 1.50 (38.10) 3.50 (88.90) 8.50 (215.90) VITON A SEALS 3.00 (76.20) 5.00 (127.00) (254.00) 1.50 (38.10) 3.50 (88.90) 8.50 (215.90) C LENGTH 4.62 (117.35) 6.62 (168.15) (295.15) 4.62 (117.35) 6.62 (168.15) (295.15) HOW TO ORDER Select catalog number as shown: G A-1 (standard) Aluminum construction only (254.00mm) centers Gage series OPTIONS:! EPDM SEALS - Specify -4 in place of -1 or -3 in catalog number.! 1/2-13 COARSE THREAD FOR MOUNTING -Specify C after the seal number.! M12 x 1.75 THREAD FOR MOUNTING - Specify M after seal number.! CONTACT FACTORY FOR AVAILABILITY & PRICE ON BLUE FLUID IN THERMOMETER - Specify B after seal number. (Not available for 3.00 [76.20mm] centers.) LUBE DEVICES, INC NAGLE AVE., P.O. BOX 1810, MANITOWOC, WI PHONE: (920) FAX: (920) sales@lubedevices.com WEBSITE: LIQUID LEVEL GAGE - FRONT MOUNT, CARD THERMOMETER 3/04 BULLETIN F

12 LIQUID LEVEL GAGE - BACK MOUNT, CARD THERMOMETER This back mount gage has the lowest profile with a wide sight opening to maximize viewing and is tamper-resistant in the field. Access to reservoir interior is necessary to tighten nuts supplied with the gage (76.20mm) centerline gage has 60 F (15.6 C) to 180 F (82.2 C) thermometer scale, 5.00 (127.00mm) and longer centerline gage has 0 F to 220 F (104.4 C) thermometer scale.! Crystal clear borosilicate sight for maximum fluid compatibility and will not discolor with time or temperature! Maximum working pressure up to 20 PSI (137.9 kpa) at 150 F (65.6 C), no corrosion BUNA N SEALS CATALOG G A-1 G A-1 A CENTERS 3.00 (76.20) 5.00 (127.00) B SIGHT 1.50 (38.10) 3.50 (88.90) C LENGTH 4.62 (117.35) 6.62 (168.15) HOW TO ORDER Select catalog number as shown: G A-1 (standard) Aluminum construction only (254.00mm) centers Gage series G A-1 G A-3 G A-3 G A (254.00) 8.50 (215.90) VITON A SEALS 3.00 (76.20) 5.00 (127.00) (254.00) 1.50 (38.10) 3.50 (88.90) 8.50 (215.90) (295.15) 4.62 (117.35) 6.62 (168.15) (295.15) OPTIONS:! EPDM SEALS - Specify -4 in place of -1 or -3 in catalog number.! CONTACT FACTORY FOR AVAILABILITY & PRICE ON BLUE FLUID IN THERMOMETER - Specify B after seal number. (Not available for 3.00 [76.20mm] centers.) LIQUID LEVEL GAGE - BACK MOUNT, CARD THERMOMETER 3/04 BULLETIN F LUBE DEVICES, INC NAGLE AVE., P.O. BOX 1810, MANITOWOC, WI PHONE: (920) FAX: (920) sales@lubedevices.com WEBSITE:

13 LIQUID LEVEL GAGE - FRONT MOUNT WITH PIPE ADAPTERS These direct reading closed circuit style gages are provided with pipe adapters for mounting in heavy wall tank or weld spuds on reservoir wall. Brass pipe thread adapters provide break point for assembly. Bottom closure cap on gage can be used as a drain. Other materials for pipe thread adapters are available - Please specify. All parts are machined from bar stock. Sight is fully recessed in gage body for excellent protection. The unique construction of these gages provide a.06 (1.52mm) alignment at each stud to facilitate mounting. Centers over (508.00mm) are available as Special made to order.! Borosilicate glass with redline on white background for distinct level reading and maximum fluid compatibility! Brass pipe thread adapters WHEN ORDERING, SPECIFY THE FOLLOWING, AFTER THE SEPARATING EACH WITH A DASH (-): -A- (standard) -B- Brass gage body (optional) -S- Steel gage body (optional) -Y- Stainless steel gage body (optional) -4- Ethylene Propylene seals (optional) -5- Silicone seals (optional) - SPECIFY PIPE THREAD SIZE: -2-1/4 Male pipe thread -3-3/8 Male pipe thread -4-1/2 Male pipe thread -5-3/4 Male pipe thread! See ENG. STD. 109 G607 PATENTED G A-1-4 1/2 pipe thread 6.00 (152.40mm) Centers Series G607 MODIFICATIONS AVAILABLE MADE TO ORDER - CONSULT OUR FACTORY (MINIMUM ORDER MAY BE REQUIRED) G607 A - CENTERS B - SIGHT C - LENGTH 03 (76.20) 1.50 (38.10) 4.62 (117.35) 04 (101.60) 2.50 (63.50) 5.62 (142.75) 05 (127.00) 3.50 (88.90) 6.62 (168.15) 06 (152.40) 4.50 (114.30) 7.62 (193.55) 07 (177.80) 5.50 (139.70) 8.62 (218.95) 08 (203.20) 6.50 (165.10) 9.62 (244.35) 09 (228.60) 7.50 (190.50) (269.75) 10 (254.00) 8.50 (215.90) (295.15) 12 (304.80) (266.70) (345.95) D E - F - 1/ (14.22) 1.19 (30.23) 3/ (14.22) 1.12 (28.45) 1/ (19.05) 1.12 (28.45) 3/ (19.05) 1.12 (28.45) LIQUID LEVEL GAGE - FRONT MOUNT WITH PIPE ADAPTERS 4/06 BULLETIN F327-7

14 LIQUID LEVEL GAGE - FRONT MOUNT WITH NEEDLE VALVES, PIPE ADAPTERS LDI INDUSTRIES series G608 closed circuit liquid level gages are furnished with shut-off valves between the tank wall and gage. The gage body can be removed from the valves without loss of fluid. Configured with pipe adapters. Bottom closure cap may be used as a drain. An exclusive construction feature provides a.06 (1.52mm) lateral adjustment at each mounting bolt to facilitate mounting. All metal parts are precision machined from solid bar stock with the sight opening recessed into the gage body for maximum protection. Aluminum valves are optional. Please specify when ordering.! Brass valves! Borosilicate glass with redline on white background for distinct level reading and maximum fluid compatibility! Maximum working temperature with standard seals up to 250 F (121.1 C)! Maximum working pressure as noted in table below at 150 F (65.6 C), no corrosion MODIFICATIONS AVAILABLE - MADE TO ORDER - CONSULT OUR FACTORY (MINIMUM ORDER MAY BE REQUIRED) WHEN ORDERING, SPECIFY THE FOLLOWING, G608 PATENTED AFTER THE SEPARATING EACH WITH A DASH (-): -A- (standard) -B- Brass gage body (optional) -4- Ethylene propylene seals (optional) -5- Silicone seals (optional) - SPECIFY PIPE THREAD SIZE: -2-1/4 male pipe thread -3-3/8 male pipe thread -4-1/2 male pipe thread -5-3/4 male pipe thread G A-1-4 1/2 Pipe thread (254.00mm) Centers Series G608 G608 A - CENTER B - SIGHT C - LENGTH MAX. WORK. PSI (kpa) 10 (254.00) 8.50 (215.90) (295.15) 275 (1896) 12 (304.80) (266.70) (345.95) 270 (1862) 15 (381.00) (342.90) (422.15) 260 (1793) 18 (457.20) (419.10) (498.35) 240 (1655) 24 (609.60) (571.50) (650.75) 210 (1448) 30 (762.00) (723.90) (803.15) 185 (1276) D 1/4-18 3/8-18 1/2-14 3/4-14 E.56 (14.22).75 (19.05) F 2.06 (52.32) 2.25 (57.15) LIQUID LEVEL GAGE - FRONT MOUNT WITH NEEDLE VALVES, PIPE ADAPTERS 11/05 BULLETIN F327-8

15 ENG. STD SIGHT OPENINGS & PRESSURE RATINGS Left side opening ENG. STD Left, front and right openings ENG. STD Front opening furnished as standard ENG. STD Right side opening ENG. STD Left and right openings ENG. STD MODIFICATIONS AVAILABLE: ENG. STD SIGHT MODIFICATIONS: A. Polycarbonate B. Clear borosilicate C. Ball float indicator 2. SURFACE FINISH: A. Aluminum 1. Clear anodize 2. Color anodize 3. Mil. Spec. anodize B. Brass or steel 1. Zinc plate 2. Nickel plate 3. Chrome plate 3. SPECIAL MARKINGS - EXAMPLES: A. No markings F. Add B. Run G. Hot C. Oil level H. Cold D. Full J. Fuel E. Refill 4. MOUNTING BOLT THREADS A. 1/2-13 B. M12 x 1.75 C. M10 x MADE TO ORDER Steel, stainless steel or brass 6. FRACTIONAL CENTERS MADE TO ORDER PLEASE SPECIFY WHEN ORDERING. MOUNTING CENTERS * MAXIMUM RECOMMENDED WORKING PRESSURE IN PSI, ENG. STD FOR.50 (12.70mm) DIA. BOROSILICATE REDLINE GAGE GLASS. PRESSURE RATING PSI (kpa) MOUNTING CENTERS PRESSURE RATING PSI (kpa) MOUNTING CENTERS PRESSURE RATING PSI (kpa) 3-9 ( ) 290 (1999.5) 17 (431.8) 250 (1723.8) ( ) 185 (1275.6) 10 &11 (254 & 279.4) 275 (1896.1) 18 & 19 (457.2 & 482.6) 240 (1654.8) ( ) 160 (1103.2) 12 & 13 (304.8 & 330.2) 270 (1861.7) 20 & 21 (508 & 533.4) 230 (1585.8) ( ) 130 (896.4) 14 & 15 (355.6 & 381) 260 (1792.7) 22 & 23 (558.8 & 584.2) 225 (1551.4) ( ) 100 (689.5) 16 (406.4) 255 (1758.2) 24 & 25 (609.6 & 635) 210 (1447.9) ( ) 75 (517.1) * FOR.88 (22.23mm) DIA. BOROSILICATE REDLINE GAGE GLASS. 3-9 ( ) 235 (1620.3) 17 (431.8) 215 (1482.4) ( ) 185 (1275.6) 10 & 11 (254 & 279.4) 230 (1585.8) 18 & 19 (457.2 & 482.6) 210 (1447.9) ( ) 160 (1103.2) 12 & 13 (304.8 & 330.2) 228 (1572.1) 20 & 21 (508 & 533.4) 205 (1413.5) ( ) 130 (896.3) 14 & 15 (355.6 & 381) 225 (1551.4) 22 & 23 (558.8 & 584.2) 200 (1379.0) ( ) 100 (689.5) 16 (406.4) 220 (1516.9) 24 & 25 (609.6 & 635) 195 (1344.5) ( ) 75 (517.1)! All pressure ratings for temperatures to 150 F (65.6 C ) and no corrosion.! All pressure ratings for gages without dial or card thermometers.! For gages with dial thermometers, maximum pressure is 125 PSI (861.9kPa) unless lower rating is shown in chart. Mounting centers will determine the pressure rating. *.50 (12.70mm) DIA. GLASS FOR.88 (22.23mm) NOMINAL SQ. BODY;.88 (22.23mm) DIA. GLASS FOR 1.25 (31.75mm) SQ. BODY. ENG. STD. FOR SIGHT OPENINGS & PRESSURE RATINGS 5/07 ENG. STD. 109