E3 VISE ACTION Compression Latch

Transcription

1 38 E3 VISE ACTION Compression Latch Overview First 90 0 turn: rotates behind frame The door is now latched against opening Then as you complete the half-turn motion, the shaft and cam compress to pull the door snugly against the frame or gasket into the locked position Versatility and simplicity in action Every SOUTHCO VISE ACTION Series latch solution starts with the single-turn latching and compressing action that is built into each model. At the heart of it all is our VISE ACTION design that has proven itself in millions of installations. Product features ÂÂ Suitable for a wide range of load configurations ÂÂ Excellent corrosion resistance ÂÂ Durable and reliable operation ÂÂ Multiple size, material and access configurations ÂÂ Compression achieved with minimal manual torque ÂÂ Suitable for NEMA4 / IP65 applications Match material and finish options for style and functionality requirements Variety of materials and finishes to complement your application. Die-cast zinc latch bodies standard finishes: Chrome plated Black powder coated Silver powder coated Stainless steel latch bodies are made by metal injection molding or precise machining. Select one of these four housing styles to fit your access requirements A series of basic housing styles of the VISE ACTION compression latch have been developed to meet specific door configuration and mounting requirements - for depth, thickness, strength, grip dimension, and surface protrusion. ÂÂ Right and left hand actuation ÂÂ Optional pre-assembled cam for quick installation ÂÂ Wide choice of accessories 37 (1.46) 69 (2.72) 60 (2.35) Small Optimum compression for use in confined space applications Large Largest choice of head styles Max. grip range in door to frame spacing Minimal protrusion style available 3-Hole Mount Simplified round-hole mounting Suitable for thick, soft or weak panels

2 39 Choose from a wide range of head styles to fit your application and industry requirements Large single hole body door preparation ÂÂ Convenient hand operated knob or T-handle styles for easy repetitive access ÂÂ Tool operated for restricted access, flush mount or low profile clearances, and industry specific standards or requirements ÂÂ Key operated for added security 3 (.11) Double bit 5 (.19) Double bit Triangle 8 (.32) Triangle Small single hole door preparation 3-Hole body door preparation 8 (.32) Hex recess Square 8 (.32) Square Railway standard Slotted recess 4 (.16) Hex recess Knob style Tubular key operated style 3 (.11) Double bit Triangle Square 8 (.32) Hex recess SOUTHCO Tubular key Slotted recess Bellcore 216 Bellcore electronics SOUTHCO Tubular key T-handle key-locking T-handle non-locking T-handle locking T-handle non-locking Wing knob locking Wing knob non-locking DOOR Knob style Determine your grip options for a perfect fit rip dimension is an important consideration in compression latch applications involving gaskets for environmental or RFI sealing. For gasketed doors: asket rip (Measured with gasket compressed) thickness asket Flange gasket rip range Deep offset cam Adjustable cam designs Maximum flexibility in tolerance or gasket compression choice to suit a broad range of grip dimensions Offset cam Straight cam Deep offset cam Lockwashers (2) Jam nuts (2) Compression thickness Flange gasket rip gasket asket seal Screw Compression Fixed cam designs Precise fit and minimum internal protrusion Wide cam selection for accurate grip dimension

3 40 E3 VISE ACTION Compression Latch Large Machined stainless steel housing Tool operated Adjustable grip Consistent pre-set compression Easy grip adjustment Premium finish and corrosion resistance Stainless steel (304 and 316 machined) Performance Details Max. static load: 600 N (136 lbf) NEMA 4 and IP65 achieved using gasket supplied Keys and Accessories See pages Caution: Position cam so latching function can be achieved comfortably by hand. Recommended tightening torque for the mounting nut is 20 N m (176 in lbf). 75 (open Position) Ø 29 (1.14) Indicator marks line up when latch is closed H Head Styles 19.5 (.77) thickness 18 (.71) Max. (door plus flange gasket) Flange gasket 0.4 (.02) 33 (1.3) compressed (supplied) asket 36 (1.42) 69 (2.72) rip range (measured in latched position) Seal 24±1.5 (.94±.06) Optional: Round hole installation with spur washer Straight cam Offset cam Deep offset cam Lockwasher (2) M10 Jam nuts (2) Housing M22 x 1.5 mounting nut Mounting lockwasher Compression Ø ( ) ( ) Part Number Selection 3 (.11) SOUTHCO 8 (.32) Slotted 8 (.32) Railway Bellcore Double bit Triangle Square Tubular key Hex recess recess Square standard 216 H Head style 2 3 (.11) Double bit 3 Triangle 4 Square 5 SOUTHCO Tubular key 6 8 (.32) Hex recess 9 Slotted recess 10 8 (.32) Square 11 Railway standard 15 Bellcore 216 E3-1 H - O rip Min. Max. Type (.64) 32.2 (1.26) Deep offset cam, forward 71.3 (2.80) 81.2 (3.19) Deep offset cam, (1.19) 46.1 (1.81) Offset cam, forward 57.6 (2.26) 73.3 (2.88) Offset cam, (1.72) 59.6 (2.34) Straight cam

4 E3 VISE ACTION Compression Latch Large Machined stainless steel housing Tool operated Fixed grip (.71) 75 o (open Position) 36±4 (1.42±.15) Optional: Round hole installation with spur washer thickness 18 Max. (.71), latch unassembled (door plus flange gasket) Indicator marks line up when latch is closed H Head style 2 3 (.11) Double bit 3 Triangle 4 Square 5 SOUTHCO Tubular key 6 8 (.32) Hex recess 9 Slotted recess 10 8 (.32) Square 11 Railway standard 15 Bellcore 216 Flange gasket 0.4 (.02) compressed (supplied) 45 (1.77) Ø ( ) ( ) Ø 28 (1.11) A Assembly status 10 Assembled 12 Unassembled 36 (1.42) 47 (1.85) asket 14 (.55) A Assembled installation rip (measured in latched position) Seal Screw M6 x 1 Thread Housing M22 x 1.5 Mounting nut Mounting lockwasher Compression A Unassembled installation E3 - A H - O Consistent pre-set compression Premium finish and corrosion resistance Reduced internal protrusion Stainless steel (304 and 316 machined) Performance Details Max. static load: 450 N (102 lbf) NEMA 4 and IP65 achieved using gasket supplied Keys and Accessories See pages Recommended tightening torque for the mounting nut is 20 N m (176 in lbf), and for the mounting screw is 10 N m (88 in lbf) Part Number Selection Select grip from table, if your grip is between two options choose smaller. rip Table Max. Thickness for Assembled Latch 20 (.79) 00 1 (.04) 30 (1.18) 05 Max. Thickness for Assembled Latch Max. Thickness for Assembled Latch 40 (1.57) (1.97) (.87) 01 2 (.08) 32.5 (1.28) (1.65) (2.05) (.94) 02 4 (.16) 34 (1.34) (1.73) (2.13) (1.02) 03 5 (.20) 36 (1.42) (1.81) (2.20) (1.10) 04 6 (.24) 38 (1.50) (1.89) (2.28) 19 Max. Thickness for Assembled Latch

5 42 E3 VISE ACTION Compression Latch Large Metal injection molding stainless steel housing Adjustable grip Consistent pre-set compression Easy grip adjustment Tool or hand operated Stainless steel 316 and 304 Performance Details Max. static load: 556 N (125 lbf) NEMA 4 and IP65 achieved using gasket supplied (.77) (open Position) Ø 29 (1.14) Indicator marks line up when latch is closed thickness 18 (.70) Max. (door plus flange gasket) 33 (1.3) M22 x 1.5 Mounting nut Flange gasket 0.4 (.02) compressed (supplied) asket (measured in latched position) Mounting lockwasher 32 (1.26) 64 (2.52) Straight cam Offset cam Deep offset cam Lockwashers (2) M10 x 1.5 Jam nuts (2) Housing Compression Caution: Position cam so latching function can be achieved comfortably by hand. Recommended tightening torque for the mounting nut is 20 N m (176 in lbf). Keys and Accessories See pages ±1.5 (.94±.06) Optional: Round hole installation with spur washer Ø ( ) ( ) H Head Styles Part Number Selection SOUTHCO Tubular key 8 (.32) Hex recess Knob Slotted recess 8 (.32) Square Railway standard 8 (.32) Triangle 3/8 Hex recess Tapered triangle H Head style 5 SOUTHCO Tubular key 6 8 (.32) Hex recess 7 Knob 9 Slotted recess 10 8 (.32) Square 11 Railway standard 20 8 (.32) Triangle 37 3/8 Hex recess 39 Tapered triangle rip Min. Max. Type (.45) 27.2 (1.07) 66.3 (2.61) 76.2 (3.00) Deep offset cam, forward Deep offset cam, 25.4 (1.00) 41.1 (1.62) Offset cam, forward 52.6 (2.07) 68.3 (2.69) Offset cam, (1.53) 54.6 (2.15) Straight cam E3-1 H - F F Finish 2 Electropolished 12 Electropolished and hand buffed (bright)

6 E3 VISE ACTION Compression Latch Large Metal injection molding stainless steel housing Fixed grip (open position) 5 (.2) thickness 18 (.70) Max., latch unassembled (door plus flange gasket) 18 (.71) A Assembled Installation H Head style 5 SOUTHCO Tubular key 6 8 (.32) Hex recess 7 Knob 9 Slotted recess 10 8 (.32) Square 11 Railway standard 20 8 (.32) triangle 37 3/8 Hex recess 39 Tapered triangle 45 (1.77) 37 (1.46) Flange gasket 0.4 (.02) compressed (supplied) 22 (.87) 32 (1.26) (tool access style) A Unassembled Installation A Assembly status 10 Assembled 12 Unassembled 40 (1.57) 36±4 (1.42±.15) Optional: Round hole installation with spur washer rip (measured in latched position) asket asket seal Screw M6 x 1 thread Housing M22 x 1.5 mounting nut Mounting lockwasher E3 - A H - F Compression Ø ( ) ( ) F Finish 2 Electropolished 12 Electropolished and hand buffed (bright) Consistent pre-set compression Tool or hand operated Reduced internal protrusion Stainless steel 316 and 304 Performance Details Max. static load: 445 N (100 lbf) NEMA 4 / IP65 achieved using gasket supplied Recommended tightening torque for the mounting nut is 20 N m (176 in lbf), and for the mounting screw in 10 N m (88 in lbf) Keys and Accessories See pages Part Number Selection Select grip from table, if your grip is between two options choose smaller. rip Table Max. Thickness for Assembled Latch Max. Thickness for Assembled Latch 15 (.59) 00 Use unassembled 25 (.98) 05 5 (.20) 35 (1.38) 10 Max. Thickness for Assembled Latch 39 (1.53) (1.93) (1.77) (.67) 01 Use unassembled 27 (1.06) 06 6 (.24) 37 (1.46) (1.85) (.75) 02 1 (.04) 29 (1.14) (.83) 03 2 (.08) 31 (1.22) (1.61) (2.01) (.91) 04 4 (.16) 33 (1.30) (1.69) (2.09) 19 Max. Thickness for Assembled Latch

7 E3 VISE ACTION Compression Latch Large Aluminum Tool Operated Fixed grip Light Weight Premium finish and corrosion resistance Reduced internal protrusion Aluminum, Anodized or Powder Coated. Hardware: Stainless Steel Performance Details Max. static load: 450 N (102 lbf) Proven to meet European Fire Test Standard EN NEMA 4 and IP65 achieved using gasket supplied Keys and Accessories See Recommended tightening torque for the mounting nut is 20 N m (176 in lbf), and for the mounting screw is 10 N m (88 in lbf) 75 o (open Position) thickness 18 Max. (.71), latch unassembled (door plus flange gasket) 18 (.71) 36±4 (1.42±.15) Optional: Round hole installation with spur washer H Head Styles Indicator marks line up when latch is closed Flange gasket 0.4 (.02) compressed (supplied) 45 (1.77) Ø ( ) ( ) Ø 28 (1.11) 36 (1.42) 47 (1.85) asket 14 (.55) A Assembled installation rip (measured in latched position) Seal Screw M6 x 1 Thread Housing M22 x 1.5 Mounting nut Mounting lockwasher Compression A Unassembled installation Part Number Selection Select grip from table, if your grip is between two options choose smaller. 8 (.32) Slotted 8 (.32) Railway Bellcore Triangle Square Hex recess Recess Square standard 216 A Assembly status 10 Assembled 12 Unassembled E3 - A H - F F Finish 59 Black Hard Anodized 06 Clear Powder Coat H Head style 3 Triangle 4 Square 6 8 (.32) Hex recess 9 Slotted Recess 10 8 (.32) Square 11 Railway standard 15 Bellcore 216 rip Table Max. Thickness Max. Thickness Max. Thickness for Assembled Latch for Assembled Latch for Assembled Latch 20 (.79) 00 1 (.04) 30 (1.18) (1.57) (1.97) (.87) 01 2 (.08) 32.5 (1.28) (1.65) (2.05) (.94) 02 4 (.16) 34 (1.34) (1.73) (2.13) (1.02) 03 5 (.20) 36 (1.42) (1.81) (2.20) (1.10) 04 6 (.24) 38 (1.50) (1.89) (2.28) 19 Max. Thickness for Assembled Latch Southco E3Alu NA lobal Corporate Headquarters and Americas Customer Service & Technical Support Center Tel: (1) Fax: (1) info@southco.com

8 44 E3 VISE ACTION Compression Latch Small Metal injection molding stainless steel housing Adjustable grip Consistent pre-set compression Easy grip adjustment Tool or hand operated Reduced dimensions (.91) 16 (.62) asket (measured in latched position) Lockwashers (2) Jam nuts (2) Shaft, M6 thread Stainless steel 316 and 304 Ø 21 (.81) 25 (1.00) Performance Details Max. static load: 356 N (80 lbf) NEMA 4 / IP65 achieved using gasket supplied Caution: Position cam so latching function can be achieved comfortably by hand. Accessories See pages Knob aligns with cam when fully latched Flange gasket 0.4 (.02) compressed (supplied) 6 (.23) Housing Mounting nut 5/8-24 thread Lockwasher thickness 13 (.50) Max. (door plus flange gasket) 37 (1.47) 4 (.17) Compression 17.5±1.5 (.69±.06) Ø Ø( ) -.0 H Head Styles Ø ( ) -.0 Part Number Selection SOUTHCO Tubular key 4 (.16) Hex recess Knob style Slotted recess H Head style 5 SOUTHCO Tubular key 6 Hex recess 7 Knob style 9 Slotted recess E3-5 H - 2 rip Min. Max (.13) (.37) (.37) 12.7 (.50) (.50) 15.9 (.63) (.63) 19 (.75) 6 19 (.75) 22.2 (.87) (.87) 25.4 (1) (1) 28.6 (1.13)

9 E3 VISE ACTION Compression Latch Small Zinc and plated steel Adjustable grip (.91) 16 (.62) asket (measured in latched position) Lockwashers (2) Jam nuts (2) Shaft, M6 thread Consistent pre-set compression Easy grip adjustment Tool or hand operated Reduced dimensions Ø 21 (.81) Knob aligns with cam when fully latched Optional gasket 25 (1.00) Flange gasket 0.4 (.02) compressed (order separately) 6 (.23) 17.5±1.5 (.69±.06) Housing Mounting nut 5/8-24 thread Lockwasher thickness 13 (.50) Max. (door plus flange gasket) 37 (1.47) 4 (.17) Compression Ø Ø( ) -.0 Zinc alloy, powder coated and steel, zinc plated Performance Details Max. static load: 330 N (75 lbf) NEMA 4 / IP65 sealing is achieved by using optional flange gasket. Flange gasket part number: E Caution: Position cam so latching function can be achieved comfortably by hand. Accessories See pages H Head Styles Ø ( ) -.0 SOUTHCO Tubular key 4 (.16) Hex recess Knob style Slotted recess Part Number Selection H Head style 5 SOUTHCO Tubular key 6 Hex recess 7 Knob style 9 Slotted recess E3-5 H - F F Finish 1 Chrome plated 5 Black powder coated 7 Silver powder coated rip Min. Max (.13) (.37) (.37) 12.7 (.50) (.50) 15.9 (.63) (.63) 19 (.75) 6 19 (.75) 22.2 (.87) (.87) 25.4 (1) (1) 28.6 (1.13)

10 46 E3 VISE ACTION Compression Latch Large Zinc and plated steel Tool operated Adjustable grip Consistent pre-set compression Easy grip adjustment Tool operated for security Zinc alloy, powder coated or chrome plated and steel, zinc plated Performance Details Max. static load: 450 N (100 lbf) NEMA 4 / IP65 sealing is achieved by using optional flange gasket. Flange gasket part number: E5-17 Caution: Position cam so latching function can be achieved comfortably by hand. Recommended tightening torque for the mounting nut is 20 N m (176 in lbf). Keys and Accessories See pages (open position) Ø 29 (1.13) Indicators line up when latch is closed 33 (1.31) Railway Standard - Bellcore 216 thickness 18 (.70) Max. (door plus flange gasket) M22 x 1.5 Mounting nut Flange gasket 0.4 (.02) compressed (order separately) asket (measured in latched position) Mounting lockwasher 32 (1.26) 64 (2.52) Straight cam Offset cam Deep offset cam Lockwashers (2) M10 x 1.5 Jam nuts (2) All Other Head Styles (slotted recess shown) Compression Indicators line up when latch is closed 9 (.35) 24±1.5 (.94±.06) Ø ( ) Optional: Round hole installation with spur washer ( ) Optional gasket

11 47 H Head Styles (other head styles available) 3 (.11) Double bit Triangle Square SOUTHCO Tubular key 8 (.32) Hex recess Slotted recess 8 (.32) Square driver Railway standard Bellcore 216 Bellcore electronics 8 (.32) Triangle 5 (.19) Double bit Part Number Selection E3-1 H - F F Finish 1 Chrome plated 5 Black powder coated 7 Silver powder coated H Head style 2 3 (.11) Double bit 3 Triangle 4 Square 5 SOUTHCO Tubular key 6 8 (.32) Hex recess 9 Slotted recess 10 8 (.32) Square driver 11 Railway standard 15 Bellcore Bellcore electronics 20 8 (.32) Triangle 48 5 (.19) Double bit rip Min. Max. Type (.45) 27.2 (1.07) 66.3 (2.61) 76.2 (3.00) 25.4 (1) 41.1 (1.62) 52.6 (2.07) 68.3 (2.69) Deep offset cam, forward Deep offset cam, Offset cam, forward Offset cam, (1.53) 54.6 (2.15) Straight cam

12 48 E3 VISE ACTION Compression Latch Large Zinc and plated steel Hand operated Adjustable grip Consistent pre-set compression Easy grip adjustment Hand operated Zinc alloy, powder coated or chrome plated and steel, zinc plated Performance Details Max. static load: 450 N (100 lbf) NEMA 4 / IP65 sealing is achieved by using optional flange gasket. Flange gasket part number: E thickness 18 (.70) Max. (door plus flange gasket) (open position) Ø 29 (1.13) 82.5 (3.25) 33 (1.31) 22 (.88) Flange gasket 0.4 (.02) compressed (order separately) 32.5 (1.27) asket Mounting lockwasher 32 (1.26) (measured in latched position) M22 x 1.5 Mounting nut 64 (2.52) Straight cam Offset cam Deep offset cam Lockwashers (2) M10 x 1.5 Jam nuts (2) Compression Caution: Position cam so latching function can be achieved comfortably by hand. Recommended tightening torque for the mounting nut is 20 N m (176 in lbf). Keys and Accessories Key CH751 page 58 Washers and sleeve nut see page (open position) 19 (.75) 5 (.20) 33 (1.31) 37 (1.46) 22 (.87) Optional gasket 24±1.5 (.94±.06) Ø ( ) Optional: Round hole installation with spur washer ( )

13 49 H Head Styles Standard knob T-handle, key-locking T-handle, non-locking Part Number Selection E3-1 H - F F Finish 1 Chrome plated 5 Black powder coated 7 Silver powder coated H Head style 1 T-handle, non-locking 7 Standard knob 8 T-Handle, key-locking keyed CH751 (two flat keys supplied) rip Min. Max. Type (.45) 27.2 (1.07) 66.3 (2.61) 76.2 (3.00) Deep offset cam, forward Deep offset cam, 25.4 (1) 41.1 (1.62) Offset cam, forward 52.6 (2.07) 68.3 (2.69) Offset cam, (1.53) 54.6 (2.15) Straight cam

14 50 E3 VISE ACTION Compression Latch Large Zinc and plated steel Tool operated Fixed grip Consistent pre-set compression Quick install Reduced internal protrusion Zinc alloy, powder coated or chrome plated and steel plated Performance Details Max. static load: 300 N (67 lbf) NEMA 4 / IP65 sealing is achieved by using optional flange gasket. Flange gasket part number: E5-17 Recommended tightening torque for the mounting nut is 20 N m (176 in lbf), and for the mounting screw in 10 N m (88 in lbf) Keys and Accessories See pages (open position) Indicators line up when latch is closed thickness 18 (.70) Max. latch unassembled (door plus flange gasket) 18 (.71) Ø 29 (1.13) 45 (1.77) 9 (.35) Flange gasket 0.4 (.02) compressed (order separately) 29 (1.13) Indicators line up when latch is closed 32 (1.26) (tool access style) Railway Standard - Bellcore (1.57) rip (measured in latched position) gasket asket seal Screw M6 x 1 Thread M22 x 1.5 Mounting nut Mounting lockwasher Compression All Other Head Styles (slotted recess shown) 36±4 (1.42±.15) Ø ( ) Optional: Round hole installation with spur washer ( ) A Assembled Installation A Unassembled Installation

15 51 H Head Styles 3 (.11) Double bit Triangle Square SOUTHCO Tubular key 8 (.32) Hex recess Slotted recess 8 (.32) Square driver Railway standard Bellcore 216 Bellcore electronics 8 (.32) Triangle 5 (.19) Double bit Part Number Selection H Head style 2 3 (.11) Double bit 3 Triangle 4 Square 5 SOUTHCO Tubular key 6 8 (.32) Hex recess 9 Slotted recess 10 8 (.32) Square driver 11 Railway standard 15 Bellcore Bellcore electronics 20 8 (.32) Triangle 48 5 (.19) Double bit E3 - A H - F F Finish 1 Chrome plated 5 Black powder coated 7 Silver powder coated A Assembly status 10 Assembled 12 Unassembled rip Table Max. Thickness for Assembled Latch Max. Thickness for Assembled Latch 15 (.59) 00 Use unassembled 25 (.98) 05 5 (.20) 35 (1.38) 10 Max. Thickness for Assembled Latch 39 (1.53) (1.93) (1.77) (.67) 01 Use unassembled 27 (1.06) 06 6 (.24) 37 (1.46) (1.85) (.75) 02 1 (.04) 29 (1.14) (.83) 03 2 (.08) 31 (1.22) (1.61) (2.01) (.91) 04 4 (.16) 33 (1.30) (1.69) (2.09) 19 Max. Thickness for Assembled Latch

16 52 E3 VISE ACTION Compression Latch Large Zinc and plated steel Hand operated Fixed grip Consistent pre-set compression Quick install Reduced internal protrusion Zinc alloy, powder coated or chrome plated and steel, zinc plated Performance Details Max. static load: 300 N (67 lbf) NEMA 4 / IP65 sealing is achieved by using optional flange gasket. Flange gasket part number: E5-17 Recommended tightening torque for the mounting nut is 20 N m (176 in lbf), and for the mounting screw in 10 N m (88 in lbf) Keys and Accessories Key CH751 page 58 Washers and sleeve nut see page (open position) (open position) 19 (.75) 82.5 (3.25) 5 (.20) thickness 18 (.70) Max. latch unassembled (door plus flange gasket) asket M22 x 1.5 mounting nut 45 (1.77) Flange gasket 0.4 (.02) 22 (.88) compressed (order separately) 37 (1.46) 22 (.87) Ø 29 (1.13) 32.5 (1.27) Mounting lockwasher 32 (1.26) 40 (1.57) (measured in latched position) asket seal Screw M6 x 1 Thread Compression 36±4 (1.42±.15) Ø ( ) Optional: Round hole installation with spur washer ( ) A Assembled Installation A Unassembled Installation

17 53 H Head Styles Standard knob T-handle, key-locking T-handle, non-locking Part Number Selection H Head style 1 T-handle, non-locking 7 Standard knob 8 T-Handle, key-locking keyed CH751 (two flat keys supplied) F Finish 1 Chrome plated 5 Black powder coated 7 Silver powder coated E3 - A H - F A Assembly status 10 Assembled 12 Unassembled rip Table Max. Thickness for Assembled Latch Max. Thickness for Assembled Latch 15 (.59) 00 Use unassembled 25 (.98) 05 5 (.20) 35 (1.38) 10 Max. Thickness for Assembled Latch 39 (1.53) (1.93) (1.77) (.67) 01 Use unassembled 27 (1.06) 06 6 (.24) 37 (1.46) (1.85) (.75) 02 1 (.04) 29 (1.14) (.83) 03 2 (.08) 31 (1.22) (1.61) (2.01) (.91) 04 4 (.16) 33 (1.30) (1.69) (2.09) 19 Max. Thickness for Assembled Latch

18 54 E3 VISE ACTION Compression Latch Large Zinc and plated steel Wing knob Adjustable grip Consistent pre-set compression Easy grip adjustment Multiple key codes Zinc alloy, powder coated and steel, zinc plated Performance Details Max. static load: 450 N (100 lbf) NEMA 4 / IP65 sealing is achieved by using gasket supplied. Caution: Position cam so latching function can be achieved comfortably by hand. Recommended tightening torque for the mounting nut is 20 N m (176 in lbf). Keys and Accessories Key CH751 page 58 Key R001 page 58 Washers and sleeve nut see page 60 (open position) 19 (.75) 75 0 L Lock Styles 9.5 (.37) 33 (1.31) thickness 18 (.70) Max. (door plus flange gasket) asket Flange gasket 0.4 (.02) compressed (supplied) Lock core Ø 28 (shown in (1.1) unlocked position) 56 (2.0) 21.5 (.87) 24±1.5 (.94±.06) Optional: Round hole installation with spur washer 64 (2.52) (measured in latched position) Straight Offset cam Deep offset cam Lockwashers (2) M10 x 1.5 Jam nuts (2) M22 x 1.5 mounting nuts Mounting lockwasher Compression Ø ( ) ( ) Wing knob, non-locking Wing knob, key-locking, keyed CH751 Wing knob, key-locking, shuttered, keyed R001 Part Number Selection L Lock style 50 Wing knob, non-locking 51 Wing knob, key-locking, keyed CH751 (1 overmolded key supplied) 58 Wing knob, key-locking, keyed R001 (1 overmolded key supplied) E3-1 L - 5 rip Min. Max. Type (.45) 27.2 (1.07) 66.3 (2.61) 76.2 (3.00) Deep offset cam, forward Deep offset cam, 25.4 (1) 41.1 (1.62) Offset cam, forward 52.6 (2.07) 68.3 (2.69) Offset cam, (1.53) 54.6 (2.15) Straight cam

19 E3 VISE ACTION Compression Latch Large Zinc and plated steel Wing knob Fixed grip (open position) A Assembled Installation 18 (.70) Lock core (shown in unlocked position) 56 (2.0) thickness 18 (.70) Max. latch unassembled (door plus flange gasket) 45 (1.77) Ø 28 (1.1) asket Flange gasket 0.4 (.02) compressed (supplied) A Unassembled Installation 21.5 (.87) 32 (1.26) 40 (1.57) 36±4 (1.42±.15) Optional: Round hole installation with spur washer (measured in latched position) asket seal Screw, M6 x 1 thread M22 x 1.5 mounting nut Mounting lockwasher Compression Ø ( ) ( ) Consistent pre-set compression Minimal internal protrusion Multiple key codes Zinc alloy, powder coated and steel, zinc plated Performance Details Max. static load: 300 N (67 lbf) NEMA 4 / IP65 sealing is achieved by using gasket supplied. Recommended tightening torque for the mounting nut is 20 N m (176 in lbf), and for the mounting screw in 10 N m (88 in lbf) Keys and Accessories Key CH751 page 58 Key R001 page 58 Washers and sleeve nut see page 60 A Assembly status 10 Assembled 12 Unassembled L Lock style 50 Wing knob, non-locking 51 Wing knob, locking, keyed CH751 (1 overmolded key supplied) 58 Wing knob, locking, keyed R001 (1 overmolded key supplied) Part Number Selection E3 - A L - 5 rip Table Max. Thickness for Assembled Latch Max. Thickness for Assembled Latch 15 (.59) 00 Use unassembled 25 (.98) 05 5 (.20) 35 (1.38) 10 Max. Thickness for Assembled Latch 39 (1.53) (1.93) (1.77) (.67) 01 Use unassembled 27 (1.06) 06 6 (.24) 37 (1.46) (1.85) (.75) 02 1 (.04) 29 (1.14) (.83) 03 2 (.08) 31 (1.22) (1.61) (2.01) (.91) 04 4 (.16) 33 (1.30) (1.69) (2.09) 19 Max. Thickness for Assembled Latch

20 56 E3 VISE ACTION Compression Latch Large Zinc and plated steel Tool & hand operated Three hole mount Adjustable grip Consistent pre-set compression Easy grip adjustment Zinc alloy, powder coated or chrome plated and steel, zinc plated Performance Details Max. static load: 450 N (100 lbf) For door thickness greater than 4 (.16) calculate screw length using the following formula: thickness + 6 (.24) 75 0 in open position 40 (1.56) 33 (1.31) Weather seal 0.8 (.03) 22 (.88) 11 (.42) thickness 4 (.16) Max. asket (measured in latched position) 60 (2.35) M4 x 0.7 screws (supplied) Straight cam Offset cam Deep offset cam Lockwasher (2) M10 lock nuts (2) Compression Keys and Accessories Pages ±1.5 (.94±.06) DOOR Ø 20±2.5 (.78±.01) 1 Hole Ø 4.8±0.1 (.19±.005) 2 Holes 16±0.1 (.62±.005) 16±0.1 (.62±.005) H Head Styles 3 (.11) Double bit Triangle Square 8 (.32) Hex recess SOUTHCO Tubular key T-handle, key-locking T-handle, non-locking

21 in 33 (1.31) open position 82.5 (3.25) 22 (.88) Weather Seal 0.8 (.03) 25 (.98) thickness 4 (.16) Max. 11 (.42) asket (measured in latched position) Latch assembly 60 (2.35) M4 x 0.7 screws (supplied) Straight cam Offset cam Deep offset Lockwasher (2) M10 jam nuts (2) Compression Part Number Selection H Head style 1 T-handle non-locking 2 3 (.11) Double bit 3 Triangle 4 Square 5 SOUTHCO Tubular key 6 8 (.32) Hex recess 8 T-Handle locking keyed CH751 (two flat keys supplied) E3-3 H - F F Finish 1 Chrome plated 5 Black powder coated 7 Silver powder coated rip Min. Max. Type (.31) 23.6 (.93) 62.7 (2.47) 76.2 (3.00) 21.8 (.86) 37.3 (1.47) 49 (1.93) 64.8 (2.55) Deep offset cam, forward Deep offset cam, Offset cam, forward Offset cam, (1.39) 51 (2.00) Straight cam

22 58 E3 VISE ACTION Compression Latch Accessories Keys Steel, zinc plated Part Number Steel tubular key (order separately) Small E3 latches: E Large E3 latches: E Keys - Steel For latches with SOUTHCO Tubular key head styles 39 (1.54) Ø 11.5 (0.45) 50 (1.97) Key Styles 2 3 (.11) Double bit 3 Triangle Zinc alloy or nylon Keys - Zinc or Nylon 55 (2.2) 4 Square 7 8 (.32) Triangle H Head style 2 3 (.11) Double bit 3 Triangle 4 Square 7 8 (.32) Triangle 8 8 (.32) Square recess 9 5 (.19) Double bit (nylon only) 10 8 (.32) Square male (zinc only) 11 Bellcore electronics 12 Bellcore 216 (zinc only) 24 6(.24) Square recess (nylon only) 56 (2.2) F Finish 1 Plated zinc 2 Natural zinc 3 Nylon black 8 8 (.32) Square recess 9 5 (.19) Double bit 10 8 (.32) Square male 11 Bellcore electronics 12 Bellcore (.24) Square recess E3 - H - F Part Number Overmolded key CH751: Single: PK Pair: PK Overmolded Keys Key CH751 Key R001 Flat Keys Key CH751 Overmolded key R001: Single: PK KR001 Pair: PK KR001 Flat key Pair: PK-10-01

23 E3 VISE ACTION Compression Latch Accessories Fixed bracket for flush mounting 59 Compressed gasket O-ring thickness Total grip Flush bracket A Part Number Material 6.6 E alvanized steel *9.3 E alvanized steel 6.6 E Stainless steel *9.3 E Stainless steel * For use with Railway standard or Bellcore 216 style only preparation For B dimensions: Large adjustable grip 24±1.5 (.94±.06) Fixed grip 36±4 (1.42±.15) Ø 43 (1.69) 19 (.75) Ø 5.4 (.21) 14 (.55) 5.4 (.21) 58 (2.28) 72 (2.84) 1.25 (.05) To calculate the, use the following formula: Thickness + Compressed asket - A. Use this with the appropriate E3 tables in the SOUTHCO Handbook to determine cam type. Double bit (key retained style) Key can only be removed in the latch closed position. A Stainless steel or galvanized steel with rubber o-ring Environmental sealing is achieved by using latch with flange gasket (optional or included with latch see pages 40-55) and sealing the mounting screw threads. Notes For use with large single hole mount tool operated E3 VISE ACTION compression latches, see pages 40-43, and B B +0.6 Ø ( ) Ø ( ) Ø 17 (.6±.01) 58±0.3 (2.28±.01) Hole for M5 or No. 10 size Fastener +0.6 Ø Hole for M5 or ±0.3 ( ) No. 10 size (2.28±.01) fastener Installation Flange gasket (see sealing notes) Hardware adjustable grip assemblies Flush bracket O-ring E3 Housing (2) Studs or screws (not supplied)

24 60 E3 VISE ACTION Compression Latch Accessories Sealing & spur washers Sealing covers Sleeve nut Sealing washers: Neoprene, natural Spur washer: Steel, zinc plated Sealing cover: Thermoplastic elastomer, black Notes Spur washer provides for round hole installation in wood and similar materials of low density Sealing Washers Small Ø 19 (.75) Ø 16 (.63) 0.8 (.03) Ø 28.2 (1.11) 13.5 (.53) Large Ø 22.6 (.89) 0.8 Spur Washer Large 19.1 (.75) Ø 31 (1.32) Ø 22.2 (.88) 0.8 (.30) Material thickness 3.8 (.15) Sealing cover cannot be used with Railway standard or Bellcore 216 styles Sealing Cover Ø F A B D C E Ø H Latch Installation Hole Size Dimensions Ø Distance across flat H A B Ø C D E Ø F 16 (.63) 13.5 (.53) 40 (1.58) 20 (.85) 29 (1.13) 10.5 (.42) 6.1 (.24) 22.3 (.88) 22.5 (.88) 19.6 (.77) 47 (1.84) 28 (1.09) 35 (1.38) 11.7 (.46) 6.9 (.27) 28.7 (1.13) Part Number See table Type Part Number Adjustment Formula Sealing washer small E Add 0.4 (.02) to door thickness Sealing washer large E5-17 Add 0.4 (.02) to door thickness Spur washer large Add 0.8 (.03) to door thickness Sealing cover small 90-1 Add 2.3 (.09) to door thickness Sealing cover large 90-3 Add 2.3 (.09) to door thickness Zinc alloy For use in double skin doors. Produce standard panel cutout in outer door and for the inner door produce 25 (.98) hole for sleeve nut. Part Number See table Sleeve Nut M22 Thread (for large E3 only) Ø 27 (1.06) Ø 22.4 (.88) Ø 26.2 (1.03) 4.8 (.19) A Ø 24.6 (0.97) A Part Number 12.7 (.50) E (.98) E

25 E3 VISE ACTION Compression Latch Accessories Padlock brackets Finger pulls 61 Padlock Bracket (Square) Ø 11 (.43) 42 (1.65) 24.5 (.96) 33 (1.30) Ø 22 (.87) 2 (.08) Padlock Bracket (Round) Ø 22.5 (.88) Ø 34 (1.34) 2 (.08) 25 (.98) Ø 11 (.43) Padlock bracket: Stainless steel, black powder coated Pull tab: Nylon, black To provide sealing use two flange gaskets and add compressed thickness of each flange gasket and bracket thickness to your door thickness. Notes Padlock bracket: For large size single hole mount tool operated only Only unassembled styles can be used with round padlock bracket Pull Tab (Small) Pull Tab (Large) 2 (.08) Inline 42 (1.66) 13 (.51) Perpendicular Ø 16 (.63) 27 (1.06) 2.4 (.09) 19.2 (.76) 19.2 (.76) Ø 22.2 (.87) 44 (1.72) 16 (.62) 30 (1.18) Pull tab in-line with cam 18 (.71) 32 (1.25) Pull tap perpendicular to cam 27.9 (1.10) in latched position Edge of door in latched position Edge of door Type Part Number Adjustment Formula Padlock bracket square E Add 2 (.08) to door thickness Padlock bracket round E Add 2 (.08) to door thickness Pull tab small - In-line E Add 2 (.08) to door thickness Pull tab small - Perpendicular E Add 2 (.08) to door thickness Pull tab large E Add 2.4 (.09) to door thickness Part Number See table

26 Compression Latches Vise Action Series, Flush Design Single-hole mount, large size Latch provides completely flush outer surface Designed for use in thicker panels such as wood Seven tool- or key-operated access styles Fixed Southco Compression Latches 18 (.71) 45 (1.77) Pawl Detail 14 (.55) 3 (.12) 75 PAWL (Open Position) 45 (1.77) 5 (.20) MIN. 28 (1.10) MAX. OUTER DOOR THICKNESS DOOR 22 Ø (.86) MOUNTIN WASHER TOTAL RIP (See Pawl Table) FRAME ASKET FRAME MOUNTIN SCREWS (M4 or No.8 not supplied) PAWL SCREW, M6 X 1 THREAD M22 x 1.5 MOUNTIN NUT 5.2 (0.20) 36 (1.4) 45 (1.75) Pull-Up To determine the proper part number: 1. Choose a head style and finish (see table). 2. Determine the total grip by adding the following items together: Outer door thickness Compressed asket thickness 3. Find your total grip in the pawl table. If your grip is between two choices, use the smaller one. 4. Use the 2 digit pawl type code that corresponds to your grip and outer door thickness to complete your latch assembly part number. 17 (.67) 00 Mounting Washer 19 (.75) SQUARE Ø 4.3 (.17) 6 PLACES Ø 43 (1.69) Ø 4.4 (.17) 12 PLACES Ø 43 (1.69) M22 X 1.5 THREAD Key Ø 33 2 (1.30) (.08) CENTER LINE FOR MOUNTIN SCREWS Mounting Nut 56 (2.2) Ø (1.30) (.13) CENTER LINE FOR MOUNTIN SCREWS (Order Separately) 55 (2.2) 3.2 (.13) Offset (see next page) HEAD STYLE 8 mm Hex Recess 7 mm Triangle 7 mm Square 8 mm Square Driver 10 mm Hex Railway Standard 8 mm Triangle Part Number Bright Chrome Black Powder Coated Satin Silver Polyester Powder Coated Keys E3-143-XX1 E3-144-XX1 E XX1 E XX1 E3-3-1 E3-4-1 E mm (.375) Hex Recess (Not available from Southco) E XX1 RIC Standard (European Railway Standard) Not available from Southco E XX1 E3-146-XX5 E3-143-XX5 E3-144-XX5 E XX5 E XX5 E XX5 E XX5 E3-146-XX7 E3-143-XX7 E3-144-XX7 E XX7 E XX7 E XX7 E XX7 E3-7-1 Latches are individually packaged. For layer packaged latches (50 pieces minimum, sold in multiples of 50) add -13 to the part number. Example: E XX Products identified with this symbol are stocked subject to prior sale in one or more of our global locations. If unavailable from our facility nearest you, allow for shipping time from another facility.

27 Pawl Type XX=00 XX=01 XX=02 TOTAL RIP 19 (.75) 21 (.83) 23 (.91) PAWL TYPE NUMBERS Pawl Offset 18 (.71) 16 (.63) 14 (.55) Pawl Type XX=10 XX=11 XX=12 TOTAL RIP 39 (1.53) 41 (1.61) 43 (1.69) Pawl Offset 2 (.08) 4 (.16) 6 (.24) HOUSIN and CAP: Die-cast zinc, bright chrome plated or powder coated, see table. RETAINER and SPRIN: 302 Stainless steel, natural. O-RIN: Buna-N rubber, natural. CAM and SLEEVE: 1075 Case hardened steel, zinc immersion coating. SHAFT and SCREW: Low carbon steel, zinc plate, chromate plus sealer. PIN: 1008 Steel, zinc plated plus chromate dip. MOUNTIN WASHER, MOUNTIN NUT and PAWL: 1010 steel, zinc plate, chromate plus sealer. Compression Latches Fixed XX=03 XX=04 XX=05 XX=06 XX=07 XX=08 XX=09 25 (.98) 27 (1.06) 29 (1.14) 31 (1.22) 33 (1.30) 35 (1.38) 37 (1.46) 12 (.47) 10 (.39) 8 (.31) 6 (.24) 4 (.16) 2 (.08) 0 (0) XX=13 XX=14 XX=15 XX=16 XX=17 XX=18 XX= (1.77) 47 (1.85) 49 (1.93) 51 (2.01) 53 (2.09) 55 (2.17) 57 (2.24) 8 (.31) 10 (.39) 12 (.47) 14 (.55) 16 (.63) 18 (.71) 20 (.79) 3 Product Strength uidelines (To assist in your product selection; samples are available for your evaluation.) Maximum static load: 300 N (79 lbs.) Average ultimate load: 700 N (157 lbs.) These loads apply to latch assemblies only. Retention to the panel is subject to user method of installation and material. 36 ± 4 (1.42 ±.15) ( ) Insert the latch through the rear of the door. Place the mounting washer then the mounting nut onto the latch. 2. Adjust mounting nut so that the head of the latch is flush with the outside of the door. The holes in the washer and the nut must be aligned. The latch must be aligned to the latching position. Southco recommends using a minimum of three mounting screws in a pattern as shown above. 3. Place pawl on latch shaft and tighten pawl mounting screw while holding the pawl with a 17 (.67) wrench. Recommended tightening torque for the Pawl Mounting Screw is 10 N m (88.5 in-lbs). millimeter (inch) millimeter (inch) Mounting Mounting Dimensions without tolerances are for reference only. Washer Nut Products identified with this symbol are stocked subject to prior sale in one or more of our global locations. If unavailable from our facility nearest you, allow for shipping time from another facility. DOOR Panel Preparation FRAME Ø 33 ± 0.3 (1.30 ±.01) CENTER LINE FOR MOUNTIN SCREWS THIS IS THE RECOMMENDED HOLE PATTERN (120 APART). USE M4 OR No. 8 MOUNTIN SCREWS (NOT SUPPLIED). Installation 39

28 Compression Latches Fixed Southco Compression Latches Vise Action Series Knob Style Single-hole mount, large size Wider flange for mounting in non-metallic materials Knob provides quick, unrestricted access Installation (.875) MIN. 25 (1.00) MAX. FRAME Ø -0.0 ( ) 34 (1.34) 15.2 (.60) MAX door thickness 37.5 Ø (1.48) RIP RANES DOOR KNOB SPACER KNOB 6.4 (.25) 17 (.66) OPTIONAL: Round hole installation with spur washer (see page 36). 2. FRAME WASHER HOUSIN, 7/8-20 thread MOUNTIN NUT 63 (2.50) SHAFT, PAWL 5/16-24 UNF thread Straight Pawl Offset pawl Deep offset pawl LOCKWASHER (2) JAM NUT (2) PULL-UP Accessory for this latch. See page 36. HOUSIN: Die cast zinc, black powder coated. SPRIN: 302 Stainless steel, natural. O-RIN: Buna-N rubber, black. PIN: 1008 Steel, zinc plated plus chromate dip. WASHER and PAWL: 1010 Steel, zinc plate, chromate plus sealer. CAM and SLEEVE: 1075 Case hardened steel, zinc immersion coating. SHAFT: Low carbon steel, zinc plate, chromate plus sealer. JAM NUTS: Steel, zinc plate, chromate plus sealer. LOCKWASHERS: Spring steel, zinc plate, chromate plus sealer. MOUNTIN NUT: Brass, zinc plate, chromate plus sealer. KNOB: lass filled nylon, black. KNOB SPACER: Nylon, black. RETAINER: Polycarbonate, black. Ø ( ) DOOR To adjust grip: Measure your grip. Open door. Position pawl on shaft to your grip measurement (with pawl in latched position). Tighten jam nuts hard against lock-washers and pawl using two wrenches. RIP RANE MIN. 10 (.39) 24 (.94) 36 (1.42) 49 (1.94) 63.5 (2.50) MAX. 27 (1.06) 40 (1.57) 52.5 (2.06) 65.5 (2.57) 79 (3.11) PART NUMBERS E * E * E E * E * Spur Washer listed on page, 36. * The same pawl (curved forward or ) is supplied for both short and long grips. For intermediate grip, straight pawl is supplied. ASKET For gasketed doors: FRAME RIP (Measured with gasket compressed) Product Strength uidelines (To assist in your product selection; samples are available for your evaluation.) Maximum static load: 445 N (100 lbs.) Average ultimate load: 890 N (200 lbs.) DOOR PAWL CAUTION: Set pawl position so that no more than 3.4 N m (30 in.-lbs.) of torque is required to secure door. millimeter (inch) millimeter (inch) Dimensions without tolerances are for reference only. 42 Products identified with this symbol are stocked subject to prior sale in one or more of our global locations. If unavailable from our facility nearest you, allow for shipping time from another facility.