Aluminum Sliding Glass Corner Meet Door Series SGD680 Product Specifications

Transcription

1 Product Specifications Monolithic glazing does not provide hurricane protection Specifications: Door members are extruded from a minimum of 6063-T6 aluminum alloy (except where noted) Finish is white or bronze Glazing is exterior Mortise locks standard on all doors Maximum panel size 5' x 8' or 4' x 10' Available in standard and custom sizes Primary door always has the locking jamb at the corner All doors are viewed from outside looking in Track quantity will be the same on both doors based on the unit with the most panels Frame members may vary in depth according to configuration Maximum of 4 tracks overall per side Screens not available Panels at corner always meet on the outer most track (see drawing) on both inside and outside corner Stainless steel assembly screws and stainless steel tandem rollers 2 3/4" exterior sill standard 3/16" tempered glass Sill is clear anodized Options: 1/4" tempered glass 7/8" insulating glass Double raised ogee colonial muntins Colonial insulating glass/gg Simulated divided lite (double raised ogee muntins with muntins between the glass) Multi-panel by-pass and pocket styles Popular glass tints Tandem nylon roller assembly (no up charge) limited by panel weight 1 5/8" sill 3 1/2" sill 4 1/2" sill 5 1/4" sill Optional 9" bottom rail (no up charge) Satin nickel or polished brass PVD hardware Argon gas (insulating glass only) Low-E (insulating glass only) Premium frame colors are Arizona eige, Pebble Khaki, Venetian ronze, and Clear Anodize Notes: Doors are tested in accordance with PA/TAS 201, 202, and 203 specifications Doors are tested in accordance with AAMA 101/1.S.2/NAFS/02 protocols Tested impact resistance to ASTM E1886 and E1996 Tested forced entry resistance to AAMA & ASTM F Tested air infiltration to ASTM E283 Tested water resistance to E547/E331 PRIMARY RIGHT Florida Product Approval available Test reports available upon requests Miami Dade County N.O.A. NOTE: PGT reserves the right to change material design and/or construction without notice or liability. OUTSIDE CORNER PRIMARY RIGHT OUTSIDE CORNER PRIMARY LEFT PRIMARY LEFT 5-91

2 How to Calculate Overall Corner Door Size OUTSIDE CORNER INSIDE CORNER TRACK LENGTH = (STRAIGHT Y-PASS DOOR ((( # OF TRACKS - 1) * 2.529) +.708) INTERIOR LEFT DOOR TRACK LENGTH = (STRAIGHT POCKET DOOR TRACK ) FINISHED OPENING = (STRAIGHT POCKET DOOR ) LEFT DOOR RIGHT DOOR TRACK LENGTH = (STRAIGHT Y-PASS DOOR ) +((( # OF TRACKS - 1) * ) RIGHT DOOR Shown as Primary Left 4 panel XXXX Pocket with a Right 4 panel XXXO y-pass viewed from outside looking in Shown with a Primary Right 4 panel XXXX y-pass with a Left 4 panel XXXX y-pass viewed from outside looking in OUTSIDE CORNER Calculations for determining overall door size and pocket track dimensions: y-pass Door Straight by-pass door dimension (from catalog) = finished corner door dimension Pocket Door Straight pocket door finished opening (from catalog) = finished corner door dimension Straight pocket door track length (from catalog) = corner pocket door track length INSIDE CORNER Calculations for determining overall door size and pocket track dimensions: y-pass Door Straight by-pass door dimension (from catalog) (((# of tracks-1) * 2.529) ) = finished corner door dimension Pocket Door Straight pocket door finished opening (from catalog) (((# of tracks-1) * 2.529) ) = finished corner door dimension Straight pocket door track length (from catalog) (((# of tracks-1) * 2.529) ) = corner pocket door track length Note: All dimensions are taken from the outer most point of the track (see drawings above). 5-92

3 How to Order a Corner Door 1. Specify Inside or Outside corner (viewed from outside looking in) 2. Specify Primary Left or Primary Right 3. Select any combination of the left and right door configurations below y-pass to y-pass Pocket to Pocket y-pass to Pocket Pocket to y-pass LEFT DOOR RIGHT DOOR Configurations Pocket y-pass Configurations Pocket y-pass X X XX XX OX XO XXX XXX OXX XXO XXXX XXXX OXXX XXXO 4. Left door size or custom size 5. Right door size or custom size 6. Pricing: Determine the price of the primary door and all the options then price the secondary door and all options. Add the two straight door prices together and add $600 to the combined list price for the corner assembly. 5-93

4 Corner Door Panel Types PANEL LETTER CORNER - PANEL TYPES CS SC QS SQ AS SA CI IC CF FC K A D M F P R CORNER CORNER FIXED FIXED CORNER CORNER FIXED FIXED 5-94

5 Pocket Panel Configurations and Size Chart TYPE Size Width Finished Opening Pocket Depth Track Length Left Hand Pockets (pictured below) 1P2T 1 POCKET / / / / / / 16 Finished opening A Panel type for Right Hand - M 2P2T 1 POCKET / / / / / / A Panel type for Right Hand - M, F 3P3T 1 POCKET 7'6" / / / / / / / / /16 A Panel type for Right Hand - M, F, F 4P4T 1 POCKET / / / / / / / / / 8 A Panel type for Right Hand - M, F, F, F All doors viewed from the outside. *Sizes do not included corner formula add-on. 5-95

6 Notes and Additional Pricing Panels and Frame 1. Pricing corner doors - select two doors, total the base price and options for each and add $600 to get the total combined list price 2. Minimum panel size is 28" x 32 5/8" 3. Maximum panel size is 5' x 8' or 4' x 10' 4. PVD finish hardware handle set (gold, stain nickel) - add $300 per locking stile 2P2T add: $300 for XO or OX configurations or $600 for XX Configurations 2P2T 1P add: $300 3P3T add: $300 for XXO or OXX configurations or $600 for XXX configurations 3P3T 1P add:$300 4P4T add: $300 for XXXO or OXXX configurations or $600 for XXXX configurations 4P4T 1P add: $ Keylock Standard handle sets add $25 per keyed lockset PVD handle sets add $35 per keyed lockset /8" sill add-on no up charge (does not provide a water design pressure) /4" sill add-on standard no up charge /2" sill add-on no up charge /2" add-on available at $14 list per foot /4" add-on sill available at $16 list per foot 11. Custom sizes and counter-top units use next largest size plus 25% 12. 4" bottom rail standard, 9" bottom rail optional with no up charge 13. Premium Frame colors are Arizona eige, Pebble Khaki, Venetian ronze and Clear Anodized Glass 14. Insulating glass make-up: 3/16" tempered monolithic - air 3/16" tempered monolithic 15. Options specific to insulating glass: Low-E options below: Only available with insulating glass LWE (hard coat) - add Low-E up charge to insulating glass option price LEH (soft coat) - add Low-E up charge to insulating glass option price L7 (soft coat) - add Low-E up charge plus 10% to insulating glass option price Argon gas add $7 list per glass lite (XX unit = 2 lites) Double tints are not available on Insulating glass 1/4" tempered monolithic or 1/4" tempered insulating glass no up charge Obscure glass only available up to 8' tall doors Colonial Muntins 16. Custom colonial configurations add 20% colonial up charge 17. Double ogee colonial: raised ogee muntin outside and raised ogee muntin inside 18. Simulated divided lite: colonial insulated internal grids between glass with double ogee colonial add double raised ogee colonial price and colonial insulated 19. Premium frame color with CIG, use colonial insulating glass column 20. rittany style colonial priced same as standard colonial Miscellaneous 21. Nylon tandem rollers optional at no extra charge 22. Standard hardware (white or black) included in base price 5-96

7 6'8" y-pass and Pocket Door Pricing List Price Available in White & ronze 6'8" y-pass SERIES SGD680 6'8" Pocket Always check with your local building officials for compliance requirements. * Sizes do not include corner formula add-on. 5-97

8 8'0" y-pass and Pocket Door Pricing Available in White & ronze List Price 8'0" y-pass SERIES SGD680 8'0" Pocket Always check with your local building officials for compliance requirements. * Sizes do not include corner formula add-on. 5-98

9 9'0" y-pass and Pocket Door Pricing Available in White & ronze List Price 9'0" y-pass SERIES SGD680 9'0" Pocket Always check with your local building officials for compliance requirements. * Sizes do not include corner formula add-on. 5-99

10 10'0" y-pass and Pocket Door Pricing Available in White & ronze List Price 10'0" y-pass SERIES SGD680 10'0" Pocket Always check with your local building officials for compliance requirements. * Sizes do not include corner formula add-on

11 Notes