AURORA ACCESSORIES EXPANSION TANKS (ASME)
|
|
- Madeleine Miller
- 5 years ago
- Views:
Transcription
1 UROR ESSORIES EXPNSION TNKS (SME) 1060 SERIES Section 1060 Page 201 ated MY /2" F E H Furnish and install, as shown on the plans, a gal. (L), dia. x long urora 1060 Series plain steel expansion tank. The tank shall have connection, glass gauge tappings and drain. shall be furnished with a base ring for vertical storage or optional saddles for horizontal mount (see note #3). The tank shall be constructed and stamped in accordance with section VIII of the SME oiler & Pressure Vessel ode. G G Working E F Pressure Painted Galvanized gal. (L) in. (mm) in. (mm) in. (mm) in. (mm) in. (mm) in. (mm) in. (mm) psi (kpa) lbs. (kg) lbs. (kg) x33 15 (57) 12 (305) (838) 8 (203) 7.00 (178) (292) 0.88 (22) 1.00 (25) 150 (1034) 44 (20) 49 (22) x51 24 (91) 12 (305) (1295) 8 (203) 7.00 (178) (292) 0.88 (22) 1.00 (25) 150 (1034) 62 (28) 69 (31) x48 30 (114) 14 (356) (1219) 10 (254) (254) (292) 1.13 (29) 1.00 (25) 150 (1034) 72 (33) 80 (36) x63 40 (151) 14 (356) (1600) 10 (254) (254) (292) 1.13 (29) 1.00 (25) 150 (1034) 92 (42) 102 (46) x72 60 (227) 16 (406) (1829) 12 (305) (254) (292) 1.13 (29) 1.00 (25) 150 (1034) 120 (55) 134 (61) x62 80 (303) 20 (508) (1588) 16 (406) (254) (457) 1.50 (38) 1.00 (25) 125 (862) 136 (62) 151 (69) x (379) 20 (508) (1981) 16 (406) (254) (457) 1.50 (38) 1.00 (25) 125 (862) 168 (76) 187 (85) x (454) 24 (610) (1651) 20 (508) (283) (457) 1.50 (38) 1.00 (25) 125 (862) 218 (99) 238 (108) x (511) 24 (610) (1829) 20 (508) (283) (457) 1.50 (38) 1.00 (25) 125 (862) 238 (108) 258 (117) x (662) 30 (762) (1581) 22 (559) (343) (610) 2.00 (51) 1.50 (38) 125 (862) 338 (154) 361 (164) x (833) 30 (762) (1956) 22 (559) (343) (610) 2.00 (51) 1.50 (38) 125 (862) 368 (167) 396 (180) x (908) 30 (762) (2134) 22 (559) (343) (610) 2.00 (51) 1.50 (38) 125 (862) 394 (179) 424 (193) x (1154) 30 (762) (2686) 22 (559) (343) (610) 2.00 (51) 1.50 (38) 125 (862) 486 (221) 523 (238) x (1117) 36 (914) (1829) 28 (711) (375) (762) 2.50 (64) 1.50 (38) 125 (862) 502 (228) 540 (245) x (1514) 36 (914) (2350) 28 (711) (375) (762) 2.50 (64) 1.50 (38) 125 (862) 645 (293) 686 (312) x * (1911) 36 (914) (3048) 28 (711) (375) 1.50 (38) 125 (862) 810 (368) 844 (384) x96 525* (1987) 42 (1067) (2438) 28 (711) (457) 2.00 (51) 125 (862) 895 (406) 928 (422) NOTES: 1. Plugged inspection openings (qty 2 2.0" each) are provided on 175 to 505 gallon tanks (662 L to 1911 L respectively). 2. n inspection Manhole is furnished on the 525 gal. (1987 L) tank. Manhole dimensions are 12" x 16" (305 mm x 406 mm). 3. ase Ring is not provided on 505 and 525 gal. tank (1911 L and 1987 L respectively). Heads arbon Steel arbon Steel 450ºF (232º) See table above. Not for omestic Potable Water s. esigned and onstructed per SME Section VIII, ivision 1. Gauge tappings included (gauge & fittings by others).
2 Section 1060 Page 202 ated FERURY 2012 Supersedes Section 1060 Page 202 ated May 2010 UROR ESSORIES PREHRGE (SME) EXPNSION TNKS 1060 SERIES (10 35 GL.) Lift Ring s & s & Maximum cceptance gal. (L) gal. (L) in. (mm) in. (mm) in. (mm) lbs. (kg) (38) 10 (38) 12 (305) 25 (635) 0.75 (19) 40 (18) (49) 13 (49) 14 (356) 25 (635) 0.75 (19) 50 (23) (87) 23 (87) 16 (406) 37 (940) 1.00 (19) 90 (41) (132) 35 (132) 20 (508) 37 (940) 1.00 (19) 125 (57) F arbon Steel 240ºF (115º) ladder Heavy uty utyl 125 psi (862 kpa) Furnish and install, as shown on the plans, urora 1060 (10 35 gal.) SME Precharged ladder Expansion, stamped 125 psi (862 kpa) working pressure. Each tank will be supplied with a heavy duty butyl replaceable bladder. shall be supplied with a ring base, lifting rings, and system connection. n air charging valve connection (standard tire valve) shall be provided to facilitate adjusting precharge pressure to meet actual system conditions. Not for omestic Potable Water s. esigned and constructed per SME, Section VIII, ivision 1. alifornia code sight glass available upon request. llow a minimum of 18" (457 mm) clearance for system.
3 Lifting Ring UROR ESSORIES PREHRGE (SME) EXPNSION TNKS 1060 SERIES ( GL.) onnection harging Valve Lifting Ring onnection Lifting Ring harging Valve Section 1060 Page 203 ated NOVEMER 2015 Supersedes Section 1060 Page 203 ated FERURY 2012 rain Plug Lifting Ring rain Plug s to s to Maximum cceptance onnection rain Plug gal. (L) gal. (L) in. (mm) in. (mm) in. (mm) in. (mm) in. (mm) lbs. (kg) (200) 53 (200) (610) 38.4 (1475) (483) 1.50 (38) 0.75 (19) 225 (102) (300) 80 (300) (610) (1328) (483) 1.50 (38) 0.75 (19) 283 (129) (400) 106 (400) (610) ( (483) 1.50 (38) 0.75 (19) 341 (155) (500) 132 (500) (610) (2036) (483) 1.50 (38) 0.75 (19) 403 (183) (600) 158 (600) (762) (1644) (610) 1.50 (38) 0.75 (19) 429 (195) (800) 211 (800) (762) (2094) (610) 1.50 (38) 0.75 (19) 519 (236) (1000) 264 (1000) (914) 73.9 (1877) (711) 1.50 (38) 0.75 (19) 550 (250) (1200) 317 (1200) (914) (2184) (711) 1.50 (38) 0.75 (19) 640 (291) (1400) 370 (1400) (914) (2502) (711) 1.50 (38) 0.75 (19) 704 (320) (1600) 422 (1600) (1219) (1803) (1067) 1.50 (38) 0.75 (19) 1183 (538) (2000) 528 (2000) (1219) (2159) (1067) 1.50 (38) 0.75 (19) 1264 (575) (2495) 660 (2495) (1219) (2591) (1067) 2.00 (51) 0.75 (19) 1435 (652) (2994) 792 (2994) (1219) (3099) (1067) 2.00 (51) 0.75 (19) 1550 (705) (3992) 1056 (3992) (1524) (2591) (1372) 2.00 (51) 0.75 (19) 2638 (1199) Operating onditions arbon Steel Temperature Range 35ºF 240ºF (1.7º 115º) ladder Heavy uty utyl Max. Pressure 125 psi (862 kpa) Furnish and install, as shown on the plans, urora 1060 ( gal.) SME Precharged ladder Expansion, stamped for 125 psi (862 kpa) working pressure. Each tank will be supplied with a heavy duty butyl replaceable bladder. shall be supplied with a ring base, lifting rings, and system connection. n air charging valve connection (standard tire valve) shall be provided to facilitate adjusting precharge pressure to meet actual system conditions. Not for omestic Potable Water s. esigned and constructed per SME, Section VIII, ivision 1. alifornia code sight glass available as an option. llow a minimum of 18" (457 mm) clearance for system piping.
4 Section 1060 Page 204 ated MY 2010 UROR ESSORIES PREHRGE (SME) LER EXPNSION TNKS FOR POTLE WTER 1060P SERIES 1/2" w/plug s 1060P-600 & 1060P-800 s 1060P-1000 & 1060P-2000 Maximum cceptance onnection gal. (L) gal. (L) in. (mm) in. (mm) in. (mm) in. (mm) lbs. (kg) 1060P (600) 158 (600) 30 (762) 65 (1651) 2 (51) 4.75 (121) 360 (164) 1060P (800) 211 (800) 32 (813) 76 (1930) 2 (51) 4.75 (121) 475 (216) 1060P (1000) 264 (1000) 36 (914) 87 (2210) 3 (76) 8.50 (216) 735 (334) 1060P (1200) 317 (1200) 36 (914) 98 (2489) 3 (76) 8.50 (216) 745 (339) 1060P (1400) 370 (1400) 36 (914) 111 (2819) 3 (76) 8.50 (216) 900 (409) 1060P (1600) 422 (1600) 48 (1219) 84 (2134) 3 (76) 8.75 (222) 1210 (550) 1060P (2000) 528 (2000) 48 (1219) 96 (2438) 3 (76) 8.75 (222) 1305 (593) Steel 200ºF (93º) ladder Heavy uty utyl F approved 125 psi (862 kpa) ronze Furnish and install, as shown on the plans, urora 1060P SME Precharged ladder Expansion, stamped 125 psi (862 kpa) working pressure. Each tank will be supplied with a heavy duty butyl replaceable bladder that meets F requirements for potable water. shall be supplied with a ring base, lifting rings, and system connection. n air charging valve connection (standard tire valve) shall be provided to facilitate adjusting precharge pressure to meet actual system conditions. For omestic Potable Water s. esigned and constructed per SME, Section VIII, ivision 1. alifornia code sight glass available upon request. llow a minimum of 18" (457 mm) clearance for system piping. Standard factory charge is 30 psi (207 kpa) unless otherwise specified.
5 UROR ESSORIES PREHRGE (SME) HORIZONTL EXPNSION TNKS 1060 SERIES Section 1060 Page 205 ated MY 2010 E harging Valve H (etween olt Holes) G 3' (etween olt Holes) F cceptance Tappings w/o Saddles Saddles for Horizontal Mounting F G H with Saddles gal. (L) gal. (L) in. (mm) in. (mm) E lbs. (kg) in. (mm) in. (mm) in. (mm) lbs. (kg) (29.5) 2.8 (10.6) 12 (305) 19 (483) (17) (365) 10 (254) 8 (203) 50 (23) (41.3) 2.8 (10.6) 12 (305) 26 (660) (21) (537) 10 (254) 8 (203) 52 (24) (82.1) 10.5 (39.7) 16 (406) 29 (737) (36) (559) 14 (356) 12 (305) 86 (39) (127.2) 12.5 (47.3) 16 (406) 42 (1067) (48) (918) 14 (356) 12 (305) 114 (52) (168.1) 23.2 (87.8) 16 (406) 55 (1397) (67) (1248) 14 (356) 12 (305) 153 (70) (210.8) 23.2 (87.8) 16 (406) 68 (1727) (77) (1588) 14 (356) 12 (305) 178 (81) (257.4) 35.6 (134.7) 24 (610) 40 (1016) (96) (749) 20 (508) 18 (457) 230 (105) (291.4) 42.5 (160.9) 24 (610) 45 (1143) (111) (873) 20 (508) 18 (457) 264 (120) (340.7) 42.5 (160.9) 24 (610) 52 (1321) (116) (1060) 20 (508) 18 (457) 273 (124) (416.4) 53.0 (200.6) 24 (610) 63 (1600) (125) (1327) 20 (508) 18 (457) 294 (134) (499.6) 69.3 (262.3) 30 (762) 50 (1270) (182) (902) 24 (610) 22 (559) 445 (202) (598.0) 79.0 (299.0) 30 (762) 59 (1499) (250) (1143) 24 (610) 22 (559) 611 (278) (798.6) (434.5) 30 (762) 77 (1956) (319) (1600) 24 (610) 22 (559) 761 (346) Steel 240ºF (115º) iaphragm Heavy uty utyl 125 psi (862 kpa) Furnish and install, as shown on the plans, urora 1060 SME Precharged iaphragm Expansion, stamped 125 psi (862 kpa) working pressure. Each tank will be supplied with a heavy duty butyl diaphragm. shall be supplied with an system connection. n air charging valve connection (standard tire valve) shall be provided to facilitate adjusting precharge pressure to meet actual system conditions. Not for omestic Potable Water s. alifornia code sight glass available upon request. esigned and constructed per SME Section VIII, ivision 1.
6 Section 1060 Page 206 ated NOVEMER 2015 Supersedes Section 1060 Page 206 ated MY 2010 UROR ESSORIES PREHRGE (SME) LER EXPNSION TNKS FOR POTLE WTER 1060P SERIES s 1060P-5 & 1060P-12 s 1060P-20 to 1060P-210 cceptance onnection gal. (L) gal. (L) in. (mm) in. (mm) in. (mm) lbs. (kg) 1060P (13) 2.3 (8.7) 10 (254) 14 (356) 0.75 (19) 22 (10) 1060P (19) 3.3 (12.5) 12 (305) 14 (356) 0.75 (19) 28 (13) 1060P (30) 5.3 (20.1) 12 (305) 20 (508) 0.75 (19) 34 (15) 1060P (57) 10.0 (37.9) 16 (406) 23 (584) 1.00 (25) 64 (29) 1060P (83) 14.5 (54.9) 16 (406) 32 (813) 1.00 (25) 88 (40) 1060P (98) 17.5 (66.2) 16 (406) 34 (864) 1.00 (25) 93 (42) 1060P (132.5) 23.5 (89.0) 16 (406) 45 (1143) 1.00 (25) 109 (49.4) 1060P (170) 30 (113.6) 20 (508) 38 (965) 1.00 (25) 148 (67.1) 1060P (227) 40 (151.4) 20 (508) 49 (1245) 1.00 (25) 175 (79.4) 1060P (265) 47 (177.9) 24 (610) 46 (1168) 1.50 (38) 259 (118) 1060P (303) 53.0 (200.6) 24 (610) 49 (1245) 1.50 (38) 268 (122) 1060P (341) 60 (227.1) 24 (610) 52 (1321) 1.50 (38) 283 (129) Liner Fixed iaphragm arbon Steel Polypropylene Stainless Steel utyl F approved Furnish and install, as shown on the plans, urora 1060P SME Precharged iaphragm Expansion, stamped 150 psi (1034 kpa) working pressure. Each tank will be supplied with a heavy duty F approved butyl diaphragm. sizes 1060P-20 to 1060P-210 shall be supplied with a ring base, lifting rings, and system connection. n air charging valve connection (standard tire valve) shall be provided to facilitate adjusting precharge pressure to meet actual system conditions. 240ºF (115º) 150 psi (1034 kpa) For omestic Potable Water s & draw-down tanks for Pressure ooster s. esigned and constructed per SME, Section VIII, ivision 1. Standard factory charge is 40 psi (276 kpa) unless otherwise specified.
7 UROR ESSORIES PREHRGE (SME) VERTIL EXPNSION TNKS 1060V SERIES Section 1060 Page 207 ated FERURY 2012 Supersedes Section 1060 Page 207 ated May 2010 This tank to be mounted vertical or horizontal. For horizontal, mounting grapples can be provided. s 1060V-15 to 1060V-20 s 1060V-40 to 1060V-280 cceptance onnection gal. (L) gal. (L) in. (mm) in. (mm) in. (mm) in. (mm) lbs. (kg) 1060V (30.3) 5.0 (18.9) (305) (483) 0.75 (19) 42 (20.0) 1060V (41.6) 5.0 (18.9) (305) (660) 0.75 (19) 52 (23.0) 1060V (94.6) 12.5 (47.3) (406) (838) (356) 1.00 (25) 84 (38.0) 1060V (132.5) 12.5 (47.3) (406) (1143) (356) 1.00 (25) 97 (44.0) 1060V (170.3) 23.2 (87.8) (508) (965) (457) 1.00 (25) 148 (67.0) 1060V (227.1) 23.2 (87.8) (508) (1245) (457) 1.00 (25) 175 (79.0) 1060V (265.0) 53.0 (200.6) (610) (1168) (558) 1.00 (25) 259 (117.0) 1060V (302.8) 53.0 (200.6) (610) (1245) (558) 1.50 (38) 268 (121.0) 1060V (340.7) 53.0 (200.6) (610) (1321) (558) 1.50 (38) 283 (128.0) 1060V (435.3) 53.0 (200.6) (610) (1676) (558) 1.50 (38) 325 (146.0) 1060V (530.0) 69.0 (261.2) (610) (1981) (558) 1.50 (38) 362 (163.0) 1060V (598.1) 79.0 (299.1) (762) (1549) (711) 1.50 (38) 591 (266.0) 1060V (798.7) (435.3) (762) (2700) (711) 1.50 (38) 752 (338.0) Steel 240ºF (115º) iaphragm Heavy uty utyl 125 psi (862 kpa) 1060V V psi (1034 kpa) 1060V V-60 Furnish and install, as shown on the plans, urora 1060V SME Precharged iaphragm Expansion, stamped 125 psi (862 kpa) working pressure. Each tank will be supplied with a heavy duty butyl diaphragm. shall be supplied with a ring base, lifting rings, and system connection. n air charging valve connection (standard tire valve) shall be provided to facilitate adjusting precharge pressure to meet actual system conditions. Not for omestic Potable Water s. alifornia code sight glass available upon request. esigned and constructed per SME Section VIII, ivision 1.
8 Section 1060 Page 208 ated MY 2010 THIS PGE INTENTIONLLY LEFT LNK
Commercial Thermal Expansion Tanks. For Closed Thermal Water Systems
Commercial Thermal Expansion s For Closed Thermal Water s mtrol thermal expansion tanks are engineered to control pressure build-up in closed, potable water systems. vailable in diaphragm, full acceptance
More informationANSUL. Vertical and Horizontal Bladder Tanks
NSUL SYSTEM OMPONENTS U.S..G. PPROVL NO. 162.033/14/0 REV. 0 UL EX-3933 7-1-94 Page 2-59 Vertical and Horizontal ladder Tanks PPLITION The nsul bladder tank is one component in a balanced pressure proportioning
More informationStandard Factory Pre-charge 40 PSIG (2.8 kg/cm 2 )
THRM-X-TROL Thermal xpansion bsorbers, ST-Series (Non-SM) 150 PSIG Working Pressure In-Line Models Model Tank Max. Sys. Ship No. Vol. ccept. Height Diameter onn. Wt. Lit. Gal. Factor cm ins. cm ins. NPTM
More informationPG-HHS
www.watts.com PG-HHS Watts Quality Sets the Standard in Hydronics With Watts hydronic products, you get longer valve life, economical control of heating and cooling zones, energy savings for your customers
More informationThermal Expansion Absorber For Potable Water TX SERIES TANKS
Thermal Expansion Absorber For Potable Water TX SERIES TANKS PRODUCT DATA SPECIFICATIONS Maximum Pressure: 150 psi (1034 kpa). Maximum Temperature: 200 F (93 C). Standard Factory Air Charge: 40 psi (276
More informationHydronic Heating Specialties
Hydronic Heating Specialties watts.com 2 Watts Quality Sets the Standard in Hydronics With Watts hydronic products, you get longer valve life, economical control of heating and cooling zones, energy savings
More informationHydronic Heating Specialties
Hydronic Heating Specialties watts.com Watts Quality Sets the Standard in Hydronics With Watts hydronic products, you get longer valve life, economical control of heating and cooling zones, energy savings
More informationPRESSURE TANKS. Approx. Tapping Size - Inches Approx. Ship. Wt. Size Inches AIR-E-TAINER PRE-PRESSURIZED WELL SYSTEM TANKS. Ship. Max Approx. Size In.
PRESSURE TANKS STANDARD VERTICAL GALVANIZED WELL SYSTEM TANKS Total Drawdown - Gallons Approx. Tapping - Inches Approx. Tank Vol..155 @.101 @.071 @ Ship. Wt. Inches A B C Gals. 20/40 30/50 40/60 Lbs. 124831
More informationWELL-X-TROL ASME WATER SYSTEM TANKS
WELL-X-TROL ASME WATER SYSTEM TANKS ASME Water Tanks for Commercial & Industrial Applications WELL-X-TROL ASME: The Professionals Choice Table of Contents The AMTROL Advantage... 2 A Wide Range of Applications...
More informationSV73 Cast Iron Safety Valve
Page 1 of 5 TI-S13-25 H Issue 11 ert. No. LRQ 0963008 ISO 9001 SV73 ast Iron Safety Valve Description The SV73 cast iron series valves are built in conformance to Section I and VIII of the SME oiler and
More informationPiston Accumulators Series Catalog HY /US Page
Page Series 5000 Series 5000 Piston ccumulators Heavy uty Service with 5000 PSI Operating Pressure 2" thru 9" ores with Over 30 Standard apacities Patented V-O-ring Piston Seals Serviceable Threaded End
More informationHorizontal Pre-Piped Bladder Tanks with Proportioner
DATA SHEET Horizontal Pre-Piped Bladder Tanks with Proportioner Features Pre-piped configurations with a wide selection of proportioner sizes, including the ANSUL FLOWMAX CL for closed-head sprinkler systems
More informationRaytherm Selection Guide
The ot Water Management Experts SM Raytherm Selection uide Specifications for ommercial tmospheric: ydronic eating oilers Water eaters Specifications and Dimensions The Raytherm Selection uide is a ready-reference
More informationMounting Components. Accumulator Catalog. Mounting Components. HS - Regular Duty Clamp. Function. HSS - Heavy Duty Clamp. Types. KBK - Base Bracket
Mounting omponents Mounting omponents Y mounting components are used to mount all types of hydropneumatic accumulators safely and simply, regardless of the mounting position. Our wide range includes suitable
More informationPiston Accumulators Series Catalog HY /US
Series 3000 Series 3000 Heavy uty Service with 3000 PSI Operating Pressure 2" thru 12" ores with Over 50 Standard apacities Patented V-O-ring Piston Seals Serviceable Threaded End onstruction Five Standard
More informationPiston Accumulators Series Catalog /USA Page
atalog 1630-7/US Page Piston ccumulators Series 5000 Series 5000 Piston ccumulators Heavy uty Service with 5000 PSI Operating Pressure 2" thru 9" ores with Over 30 Standard apacities Patented V-O-ring
More informationSPECIFICATION DATA. PIPE COVERING PROTECTION SADDLE #70 (1" Insulation) # 94/95 # 93 COVERING (LBS.) 3/4 1 9/ /16 2 1/2 7/ /16 5 3/8
PIPE OVERING PROTETION SALE #70 (1" Insulation) 3/4" through " arbon Steel omplies with MSS SP- and MSS SP-9 (Type 39). esigned to protect pipe insulation from crushing, enter rib starts at " IP IRON PIPE
More informationSteel Pressurized Tanks
PS119 PS32 PPLICTIONS Use wherever pressurized tanks are needed in water systems applications. PS62 PS19S PS19H PS50 PS2 PS19T PS6H PS35 PS5 PS6 SPECIFICTIONS Shell Heavy gauge steel Base High-impact composite,
More informationTanks. The Industry s Longest Warranty: 7 Years E-1
The Industry s Longest Warranty: 7 Years Dome Projection Welded Air Valve Eliminates threaded valve leak paths. Tamper-evident warning label for added safety. WARRANTY 7YEAR NEW High Strength Steel (HSS)
More information197C. Valve Group. Series Farris Engineering Pressure Relief Valves
97 Valve Group Series 700 Farris Engineering Pressure Relief Valves Numbering System Selecting and specifying Farris pressure relief valves is simple using the numbering system that follows. Each digit
More informationVertical Pre-Piped Bladder Tanks with Proportioner
DATA SHEET Vertical Pre-Piped Bladder Tanks with Proportioner Features Pre-piped configurations with a wide selection of proportioner sizes, including the ANSUL FLOWMAX CL for closed-head sprinkler systems
More informationModel MTB-ASME Horizontal Pre-Piped Bladder Tanks
DATA SHEET Model MTB-ASME Horizontal Pre-Piped Bladder Tanks Features n Pre-piped configurations with a wide selection of proportioner sizes, including the SKUM TPW-150 MK2 for closedhead sprinkler systems
More informationF20 & F21 QIX Particulate & Coalescing Filters
F2, F21 Series QIX Filters 1/4, 3/8, 1/2, 3/4 & 1 Inch Ports F2 & F21 QIX Particulate & oalescing Filters Manual rain utomatic rain Unique Interchangeable QIX Inserts llow One Module to ccommodate Port
More informationGround Wire Size. 1/2 in /4 in. 2 in /2 in. 3-1/2 in TB. 4 in. 5 in. #4 4/0 AWG 3906-TB
lamps Waterpipe Ground lamps Waterpipe Ground lamps Waterpipe Ground lamps 2-T Ground Wire Size Water Pipe Size 1/2 in., 3/4 in., 1 or rebar 4-10 3-T 1-1/4 in., 1-1/2 in. or 2 in. #6, #4, #2 WG 4 2-1/2
More informationPressure Vessels. BT Series. RDT Series. SEP Series. ADSR/AD Series. RLU/RWU Series. CBT Series
SINCE 1981 Pressure Vessels BT Series Replaceable Bladder Expansion Tank with Bottom System Connection RDT Series Fixed Bladder Expansion Tank SEP Series Vortex - Tangential Air Separator ADSR/AD Series
More informationPermanent Gauging Blocks Installation Instructions
DESCRIPTION Permanent Gauging Blocks Installation Instructions The HYDAC Permanent Gauging Block is designed to fit the following types of HYDAC accumulators: bladder, diaphragm (with HYDAC gas valve version
More informationFill Opening (in) Top Fitting (in) Bottom Fitting (in)
Heavy lue 45192-65 23 43 8 41861-100 28 43 8 40281-165 31 56 16 41856-200 30 72 8 40213-300 36 79 16 40302-305 46 50 16 40148 40150 500 48 73 16 40023-550 67 44 16 40606-750 48 103 16 40152 40154 1000
More informationGRUNDFOS DATA BOOKLET. GT pressure tanks. For cold-water and heating applications
GRUNFOS ATA BOOKLET GT pressure tanks For cold-water and heating applications GT pressure tanks Table of contents 1. Product data 3 Applications..................................................................................
More informationMIS SERIES. Mist Eliminator. Installed differential pressure gauge and optional zero air-loss drain valve. Air or Water Cooled Aftercooler
MIS SERIES Mist Eliminator The ircel MIS Mist Eliminator (300-8000 scfm) provides a full line of mist eliminators to effectively remove oil, solids and water from your compressed air system. In addition,
More informationBourdon Tube Type Differential Pressure Gauge & Switches Model 109
BULLETIN NO. 109/11 (SUPERSEDES BULLETIN NO. 109/05) Bourdon Tube Type Differential Pressure Gauge & Switches Model 109 LOKED LOGI LRM ONTROLS (vailable with 1 or 2 switches for alarm & control) Over Range
More informationIncludes electric operated valve Pressure gauge with siphon, vacuum breaker and air vent BOILER UNITS
STEAM / HOT WATER MODELS HWG FEATURES A. O. Smith hot water generators are available for operation with steam or boiler water as the energy source. They are completely assembled with components sized,
More informationModel MTB-ASME Vertical Pre-Piped Bladder Tanks
DATA SHEET Model MTB-ASME Vertical Pre-Piped Bladder Tanks Features n Pre-piped configurations with a wide selection of proportioner sizes, including the SKUM TPW-150 MK2 for closedhead sprinkler systems
More informationBladder Accumulators za03 Bottom Repairable Top Repairable Medium Flow High Flow Transfer Barrier Gas Bottle
LADDER PRODUCTS za03 ottom Repairable Top Repairable Medium Flow High Flow Transfer arrier Gas ottle Features: Operating Pressures to 6600 PSI Ten Different Capacities from 10 cu in to 15 gallons Nine
More informationSection 3. Stainless Steel Series. Shurjoint Stainless Steel Piping Series Grooved Mechanical Couplings. Cast Grooved Fittings.
Section 3 Stainless Steel Series Shurjoint Stainless Steel Piping Series... 84 Grooved Mechanical ouplings SS-5 Rigid oupling... 85 SS-7 Rigid oupling... 86 SS-7X Rigid oupling... 87 SS-8 Flexible oupling...
More informationModulating Water Valves and Bulb Wells
Modulating Water Valves and ulb Wells PPLITION: These modulating valves regulate the flow of water to the heat exchanger to maintain a desired exiting oil temperature. They open automatically when temperature
More informationShell and Tube Heat Exchangers
Shell and Tube eat Exchangers Shell and Tube eat Exchangers TE RYROT RNE O NON-STORE ETIN LORIIERS VE EEN ESINE TO MEET TE REQUIREMENTS O TOY S ENVIRONMENT N RE SUITLE OR WTER TO WTER N STEM TO WTER PPLITIONS.
More informationButterfly Valve - Series 200
utterfly Valve - Series 200 utterfly Valve design is the most common type of rotary valve and provides low weight to v Ratio combined with simplicity of design and comparatively low cost. It is a simple
More informationMODEL CB800 Circuit Balancing Valves
MOEL 00 ircuit alancing Valves VLVES & ESSORIES Model 00 ircuit alancing Valves are designed to achieve accurate and efficient balancing of hydronic heating or cooling systems. ircuit alancing Valves provide
More informationMax. Oper. Pressure Kgf/cm 2. Min. Oper. Pressure. Design. Design Standard. Number
ccumulators ccumulators are mainly used to store pressure fluid and these are used as a hydraulic damper. lthough various types of accumulators are developed today, proper selection should be made for
More informationBALANCED PRESSURE PROPORTIONING BLADDER TANK SYSTEM
BLNCD PRSSUR PROPORTIONING BLDDR TNK SYSTM Features ccurate Proportioning of Foam Concentrate into firewater stream to produce the optimum extinguishing solution Shell constructed of Steel complying to
More informationSECTION PIPING SPECIALTIES PART 1 GENERAL 1.1 SUMMARY
SECTION 230533 - PIPING SPECIALTIES PART 1 GENERAL 1.1 SUMMARY A. Section Includes: 1. Pressure gages. 2. Pressure gage taps. 3. Thermometers. 4. Thermometer supports. 5. Test plugs. 6. Static pressure
More informationThe Complete Range of Fluid Power Products
The omplete Range of Fluid Power Products lectropneumatics & Hydraulics (India) Pvt. Ltd. Fluid Power ivision (FP) lectropneumatics Fluid Power ivision (FP) lectropneumatics and Hydraulics (I) Pvt. Ltd.
More informationTECHNICAL MANUAL OPERATOR S, UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL FOR
TECHNICAL MANUAL OPERATOR S, UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL FOR SEMITRAILER, TANK: 5000 GALLON, (POTABLE WATER DISPENSING) XM1098 (NSN 2330-01-330-2779) Approved for public
More informationVertical & Horizontal Bladder Tank Foam Storage Devices Model MXC
1 General description The KCA bladder tank together with KCA ratio controllers, form a balanced pressure proportioning system used to mix water and firefighting foam concentrate together to produce an
More informationSection 8. Copper Series
Section 8 opper Series Grooved ouplgs, Fittgs & omponents for opper Tubg... 164 Pressure Ratgs of opper Tubg... 164 Standard Roll Groove for U.S. Standard opper Tubg... 164 Grooved ouplgs & Flanges for
More informationDODGE USN 500 and 600 Series Adapter Mount & 200 and 300 Series Direct Mount Plummer Blocks
DODGE USN 500 and 600 Series Adapter Mount & 200 and 300 Series Direct Mount Plummer Blocks These instructions should be read thoroughly before installation or operation. GENERAL INFORMATION WARNING: To
More informationHART Series Fabricated Strainers
Table Of ontents HART Series Fabricated Strainers Fabricated Strainers................................................2 HART Series T,T and TP Temporary Strainers.........................3 HART Series
More informationResilient-Seated Gate Valves with Vertical or Cross Wall Post Indicator
Worldwide ontacts www.tyco-fire.com Resilient-Seated Gate Valves with Vertical or ross Wall Post Indicator General Description TYO Resilient-Seated Gate Valves with Vertical and ross Wall Indicators are
More informationResilient-Seated Gate Valves with Vertical or Cross Wall Post Indicator
Worldwide ontacts www.tyco-fire.com Resilient-Seated Gate Valves with Vertical or ross Wall Post Indicator General Description TYO Resilient-Seated Gate Valves with Vertical and ross Wall Indicators are
More informationVertical Multi-stage Pumps - 60 Hz.
P erk.qxd 1/5/6 3:24 PM Page 1 Vertical Multi-stage Pumps - 6 Hz. PVM - ast Iron PVMI - 34 Stainless Steel PVMX - 316 Stainless Steel Models low Series HP Range GPM PVM/PVMI/PVMX 2 1/2 5 1 2 PVM/PVMI/PVMX
More informationTransmission Pressures - Test and Adjust
Testing and Adjusting 938G Wheel Loader and IT38G Integrated Toolcarrier Power Train Transmission Pressures - Test and Adjust NOTICE Care must be taken to ensure that fluids are contained during performance
More informationHORIZONTAL BLADDER TANKS
HORIZONTAL BLADDER TANKS The Chemguard Horizontal Bladder Tank is one component in a balanced pressure foam proportioning system. It requires no external power, other than the water pressure to ensure
More informationDODGE USAF 500 SERIES Pillow Blocks
INSTRUCTION MANUAL for ADAPTER MOUNTED DODGE USAF 500 SERIES Pillow Blocks WARNING: Because of the possible danger to person(s) or property from accidents which may result from the improper use of products,
More information1. Expansion Vessels. We reserve the right to change designs and technical specifications of our products.
. Expansion Vessels Flamco produces a comprehensive range of diaphragm expansion vessels. oth the steel vessel and the diaphragm are of the highest quality. They are compliant with all prevailing European
More informationTECHNICAL DATA OBSOLETE
March 21, 2008 Foam 180a 1. DESCRIPTION The Viking bladder tank consists of an inner tank (bladder) fabricated of a flexible material (Buna-N over nylon) and an outer tank fabricated from carbon steel.
More informationSteel Fabricated Coupling
Steel Fabricated Coupling Straight Connection IMPORTANT LINKS Click appropriate words to go to: Standard Limited Warranty Sales Terms & Conditions Freight Policy Returns Policy Corrosion & Product Selection
More informationExpansion Tanks. In pressure boosting systems. Features of accumulator vessels. In closed heating and cooling circuits
Expansion Tanks In pressure boosting systems The accumulator vessel with replaceable bladder is a device that, when fitted into a pressurised water system will provide system water at a preset, sustained
More informationCord Connectors AMERICAN FITTINGS. Corporation. Specification Grade Alloy Steel, Aluminum, Stainless Made in the USA
ord onnectors Specification Grade lloy Steel, luminum, Stainless Made in the US Why ren t Your ables Wearing the EST? STOP USING OUTTE OR ONNETORS N ONNET WITH THE EST! MFIO SPE-grade Strain Relief ord
More informationMark 53/54 Series. Pressure Regulators Mark 53 Differential Back Pressure Regulators. Differential Back Pressure Regulators.
Mark 53/54 Series ifferential Back Pressure Regulators The Jordan Mark 53 maintains a constant differential between the inlet pressure and the pressure loaded on top of the diaphragm. It can be used for
More informationMid-West Instrument. Bellows Type Differential Pressure Gauges & Switches Model s 105 & 106
Bellows Type Differential Pressure Gauges & Switches Model s 105 & 106 Dry Gauge Design with No Internal Liquid Fill BULLETIN NO. 105-106/12 (SUPERSEDES 105-106/11) Industrial ontrol Over Range Protection
More informationLEADING U.S.A. MANUFACTURER OF FORGED INDUSTRIAL HARDWARE AND CUSTOM FORGINGS
ommitted to Quality and Total ustomer Satisfaction WHO WE RE LEDING U.S.. MNUFTURER OF FORGED INDUSTRIL HRDWRE ND USTOM FORGINGS MISSION STTEMENT The ustomer Is First Ken Forging, Inc. is committed to
More informationCOMLIN ISOLATION PRODUCTS
OMLIN ISOLTION PROUTS omlin is a family of elastomeric materials developed over a number of years to meet the arduous and very specific requirements of the process pipework engineer. 1 2 4 5 6 The primary
More information10. Universal Clips. 254 Product overview 2013 We reserve the right to change designs and technical specifications of our products.
10. Universal lips Whether you need ceiling, wall or floor mounted clips, Flamco has the solution. We offer a wide range of universal mounting clips with a variety of closures, connections and finishes.
More informationHTTF Transit Time Ultrasonic Flow Meter
Installation onsiderations imensional Specifications 1. Select the optimum mounting location on the piping system a full pipe with at least 10 straight pipe diameters upstream and 5 pipe diameters downstream
More informationA-4000 Series Oil Removal and Pressure-Reducing Stations and Air Compressor Accessories
A-4000 Series Oil Removal and Pressure-Reducing Stations and Air Compressor Accessories Installation Applications The A-4000 Series Oil Removal and Pressure-Reducing Stations (see Figure 1, Figure 2, Figure
More informationGSZ16. High-Efficiency Split System Heat Pump Up to 16 SEER & 9.0 HSPF 1½ to 5 Tons
ooling apacity: 18,000 to 60,000 Heating apacity: 18,000 to 60,000 High-Efficiency Split System Heat Pump Up to 16 SEER & 9.0 HSPF 1½ to 5 Tons ontents Nomenclature... 2 Product Specifications... 3 Expanded
More informationElectrical Accessories
complete system of top quality, time saving products, designed for surface metal raceways, lighting and cable supports. Innovative designs offer many installation advantages. -Line s surface raceways are
More informationB1F. B Series Forged Brass Ball Valves 5.1
** Suitable for use with natural gas, manufactured gas and liquefied petroleum gases (distributed as vapour with or without the admixture of air), or mixtures thereof. Not for use on Sour Gas. Series Forged
More informationLEADING U.S.A. MANUFACTURER OF FORGED INDUSTRIAL HARDWARE AND CUSTOM FORGINGS
PRIE TLOG ommitted to Quality and Total ustomer Satisfaction WHO WE RE LEDING U.S.. MNUFTURER OF FORGED INDUSTRIL HRDWRE ND USTOM FORGINGS MISSION STTEMENT The ustomer Is First Ken Forging, Inc. is committed
More informationKnuckleboomLoaders
2410 2414KnuckleboomLoaders uilt etter Than It Needs To e System Versatility Various factory installed hydraulic packages are available including bar saw slasher, delimber, carrier, and grapple saw, as
More informationKS Pump Stations. Engineering Submittal Sheet. Installation Sets for Collectors
Engineering Submittal Sheet Installation Sets for Collectors Layout legend S Supply from collector to storage R Return from storage to collector 1 Ball valve with thermometer and integrated gravity break
More informationRosedale Model HSS300 and HSS750 Single Cartridge Housings for Liquids
H S S S I N G L E C A R T R I D G E H O U S I N G S Rosedale Model HSS0 and HSS750 Single Cartridge Housings for Liquids Precision Machined Knife-Edge Seal The Rosedale Model HSS single element filter
More information4900 Series Air Separators Standard & High Velocity
Air Seperator - AS2, 3, 4 Air limination & ontrol 4900 Series Air Separators Standard & High Velocity Save money and lengthen the life of system pumps, piping, and components with the Taco 4900 Series
More informationEagle Industry Co., Ltd.
Cat. No. 239E-15 Compliant with all major egulations and Standards ACCUMULATO CE Mark (EU) egulation for oiler and Vessel Manufacture Licensing (CINA) ASME U Stamp (USA) Eagle Industry Co., Ltd. Printed
More informationThis Service Bulletin replaces SB , Cooling System Service, dated (1.2007), publication no. PV Cooling System, Pressure Test
Volvo Trucks North America Greensboro, NC USA This Service Bulletin replaces SB 260-32, Cooling System Service, dated (1.2007), publication no. PV776 20177193. Cooling System, Pressure Test DService Bulletin
More informationHot Water Generator Systems Water to Water Steam to Water. Horizontal or Vertical Jacketed & Insulated
Horizontal or Vertical Jacketed & Insulated Lochinvar s Hot Water Generator Systems are ideal when boiler capacity is sufficiently sized to cover potable hot water demand and provide source water for hydronic
More informationProduct Submittals for Project
Product Submittals for Project May 011-1 Couplings Figure 577 Light Weight Rigid Coupling For Fire Protection Pressure Rating and Listing / Approval information contact Tyco Fire Suppression & Building
More informationEngine Brake, Design and Function. This information covers the design and function of the Volvo Engine Brake (VEB) on the Volvo D11F engine.
Volvo Trucks North America Greensboro, NC USA Service Bulletin Trucks ate Group No. Page 11.2006 253 53 1(7) Engine Brake esign and Function 11F Engine Brake, esign and Function W2005865 This information
More informationManufacturer of precision helical gear pumps for a wide range of industrial applications
Manufacturer of precision helical gear pumps for a wide range of industrial applications Made in the U our series of versatile helical gear pumps for moving both low and high viscosity liquids PUMP U 2
More informationSTEAM TRAPS. Float and Thermostatic Steam Traps (continued) Series C and X. Dimensions in. (mm)
STM TRPS loat and Thermostatic (continued) Series and X or large high capacity units s available: Series : 1 1 /4" NPT and SPT 1 1 /2" NPT and SPT 2" NPT and SPT 2 1 /2" NPT Series X: 2" NPT Resistant
More informationASPF. Product Specifications. Multi-Position Air Handler. 1½ to 5 Tons. with Energy-Saving Motor
Multi-Position Air Handler with Energy-Saving Motor The Goodman brand Multi-Position Air Handler is suitable for use with refrigerants -0A and -. This unit s blower design includes an E fixed-speed motor
More informationBACKFLOW PREVENTION CATALOG
ouble Check etector Backflow Preventers CA 4SG SERIES CA 4SG SERIES OUBLE CHECK ETECTOR ASSEMBLY The Apollo CA 4SG Series ouble Check etector Assembly is designed to prevent contamination of the potable
More informationAWWA Grooved Fittings
WW Grooved Produts WW Grooved Fittings MTERI SPECIFICTIONS Mteril - Dutile Iron per STM 53 Grde 5-45-12. Interior lining - Cement lined per NSI/WW C104/21.4 sizes 3 single thikness nd sizes 4-3 doule thikness
More informationProducts for Heating, Ventilating and Air Conditioning
A Commitment To Bring You The Best Products for Heating, Ventilating and Air Conditioning 1 Triple Duty Valves 2 Diffusers/Diverters Suction Diffusers Flow Diverters 3 Tanks ASME Bladder ASME Plain Steel
More informationHot Water Generator Systems Water to Water Steam to Water. Horizontal or Vertical Jacketed & Insulated
Horizontal or Vertical Jacketed & Insulated Hot Water Generator Systems Water to Water to Water Lochinvar s Hot Water Generator Systems are ideal when boiler capacity is sufficiently sized to cover potable
More informationSURGE RESTRAINT FIG. 055
NFPA SWIVL RING HANGR Function: esigned for the suspension of non-insulated stationary pipe lines. The knurled insert nut that allows a vertical adjustment after installation, is tapped to NFPA reduced
More informationPiston Accumulators. SK Series 28 INNOVATIVE FLUID POWER. Piston Accumulators. Piston Types. Description. Construction.
SK Series Piston Accumulators Piston Types TYPE 2 Without heck Valves Application (without heck Valve) Low-friction design for higher piston speeds, slow movements without stick-slip effect and high number
More informationDETAILED EQUIPMENT SPECIFICATION MR SERIES WATER SOFTENERS
5356 Hillside Avenue Indianapolis, IN 46220 P: +1 888-56-Water (569-2837) F: +1 317-255-4727 info@nancrede.com www.nancrede.com DETAILED EQUIPMENT SPECIFICATION MR SERIES WATER SOFTENERS 1.0 SCOPE 1.1
More informationD15/D17 Series psi (172 bar) for Metallic Pump Heads
15/17 Series Maximum Flow Rate: Maximum Pressure: 15.5 gpm (58.7 l/min) 25 psi (172 bar) for Metallic Pump Heads 15/17 Series Performance Capacities Flow Pressure Model Max. Input rpm gpm l/min Max. Inlet
More informationSERIES G603 STANDARD FRONT MOUNT GAGE
LIQUID LEVEL GAGE -FRONT MOUNT, FLEXIBLE, CLEAR Economical, versatile and durably constructed. Available in mounting lengths to 600 inches (15240mm). Practical where oil level readings are necessary on
More informationModel 912. Model 913: Full nozzle design. Bronze/brass body and bonnet. 316 SS trim (base, disc and disc holder).
Models, 3, and SME Section VIII, ir/steam/gas/liquid, UV National oard ertified. lso available for Vacuum Service. PED ertified for Non-Hazardous Gas. pplications ir/gas compressors - intercoolers - aftercoolers.
More informationIMMERSION FIRED HOT WATER BOILER
918 W WALNUT ST, DANVILLE, KENTUCKY 40422-0048 PHONE (859) 236-3181 www.sellersmfg.com SPECIFICATION SHEET NO. 8301 IMMERSION FIRED HOT WATER BOILER GENERAL DESCRIPTION The Sellers immersion fired S-Series
More informationCartridge Filter Housings Nowata A Series
Cartridge Filter Housings Nowata A Series Customization May Change the Model Number Designation to B, D or F Series 1. Introduction All A series cartridge filter housings are designed for efficient liquid
More informationMaximum Motor Power 0.25 hp 0.19 kw Torque Range ft. lbs Nm. Torque Range ft. lbs Nm Non-Reversible
21MF-900/910 Series 21MR-910 Series 0.3 hp 0.22 kw 0.25 hp 0.19 kw 0.24 11.3 ft. lbs. 0.3 15.3 Nm 1.2 10.0 ft. lbs. 1.6 13.6 Nm Threaded or Keyed Spindle 21MF-900 21MR-911 Code 0, 1, 2 & 3 5.69 Code 4
More informationDETAILED EQUIPMENT SPECIFICATION MHC SERIES WATER SOFTENERS
2227 South Street P.O. Box 044170 Racine, Wisconsin 53404-7003 Phone: 262-681-1300 Fax: 262-681-1318 www.marlo-inc.com DETAILED EQUIPMENT SPECIFICATION MHC SERIES WATER SOFTENERS 1.0 SCOPE 1.1 Provide
More informationCENTRIFUGAL PROCESS PUMPS MODEL A100 ANSI B73.1
CENTRIFUGAL PROCESS PUMPS MODEL A ANSI B7.1 Heavy Duty Design Features Permit a Wide Range of Process Services All EAGLE A pumps have 1 lb. raised face flanges as standard except 1" and " casings which
More informationMAINTENANCE MANUAL. Covering Models: Series (1/4-10 ) S Series (1/4-1 ) Series (3-10 )
BFMM4000 1-09 MAINTENANCE MANUAL Covering Models: 40-200 Series (1/4-10 ) 40-200S Series (1/4-1 ) 40-700 Series (3-10 ) REDUCED PRESSURE PRINCIPLE (RPZ) BACKFLOW PREVENTERS 1/4" - 10" AND REDUCED PRESSURE
More informationJST Series. Cemline STONESTEEL Jacketed Storage Tanks
JST Series Cemline STONESTEEL Jacketed Storage Tanks STONESTEEL is a registered trademark of Cemline Corporation CEMLINE CORPORTION P.O. BOX 55 CHESWICK, PENNSYLVNI 15024 Phone: (724) 274-5430 FX: (724)
More informationSection 10 Chapter 20
Section 10 Chapter 20 24 Valve, 8.3 Liter Engine Specifications Note: All coding used in the 8.3 Liter and 9 Liter engine manuals are Cuins engine codes. These engine codes have no meaning to New Holland
More informationAPG. LF - Miniature Liquid Level Sensors
LF - Miniature Liquid Level Sensors The LF Miniature Liquid Level sensors are designed for reliable operation in small tanks and containers. Their rugged design and multiple configurations make them the
More information