Maximum Motor Power 0.25 hp 0.19 kw Torque Range ft. lbs Nm. Torque Range ft. lbs Nm Non-Reversible
|
|
|
- Roxanne Booth
- 5 years ago
- Views:
Transcription
1 21MF-900/910 Series 21MR-910 Series 0.3 hp 0.22 kw 0.25 hp 0.19 kw ft. lbs Nm ft. lbs Nm Threaded or Keyed Spindle 21MF MR-911 Code 0, 1, 2 & Code Code 5, 6 & Code 1, 2 & Code Code 5, 6 & /8" Threaded 3/8" Keyed 21MF MF MF MF :1 21MF MF :1 21MF MF :1 21MF MF :1 21MF MF :1 21MF MF :1 21MF MF :1 3/8" Keyed Spindle 21MR :1 21MR :1 21MR :1 21MR :1 21MR :1 21MR :1 21MR :1 14 Air consumption: 12 cfm (.34 m 3 /min) Offset (Side-to-Center) 47/64" Air consumption: 14 cfm (.40 m 3 /min) Offset (side-to-center) 15/16" Muffler 15
2 31MF-900/910 Series 0.5 hp 0.37 kw ft. lbs Nm Threaded or Keyed Spindle 31MR-910 Series 0.3 hp 0.22kW ft. lbs Nm 31MF MR-911 B Dim. Code 0, 1, 2 & Code Code 5, 6 & Code 1, 2 & Code Code 5, 6 & /8" Threaded 3/8" Keyed 31MF MF MF MF :1 31MF MF :1 31MF MF :1 31MF MF :1 31MF MF :1 31MF MF :1 31MF MF :1 Air consumption: 18 cfm (.51 m 3 /min) Offset (Side-to-Center) 15/16" 3/8" Keyed Spindle 31MR :1 31MR :1 31MR :1 31MR :1 31MR :1 31MR :1 31MR :1 Air consumption: 21 cfm (.59 m 3 /min) Offset (side-to-center) 1-1/8" 17
3 41MF-900/910 Series 0.75 hp 0.56 kw ft. lbs Nm Threaded or Keyed spindle 41MR-910 Series 0.6 hp 0.45 kw ft. lbs Nm 41MF MR-911 B Dim. Code 0, 1, 2 & Code Code 5, 6, 7 & Code 1, 2 & Code Code 5, 6 & /2" Threaded 1/2" Keyed 41MF MF MF MF :1 41MF MF :1 41MF MF :1 41MF MF :1 41MF MF :1 41MF MF :1 41MF MF :1 41MF MF :1 Air consumption: 27 cfm (.76 m3/min) Offset (side-to-center) 1-7/32" 1/2" Keyed Spindle 41MR :1 41MR :1 41MR :1 41MR :1 41MR :1 41MR :1 41MR :1 41MR :1 Air consumption: 25 cfm (.71 m3/min) Offset (Side-to-Center) 1-7/32" All tools performance 90psi (620 kpa) air pressure Muffler 19
4 61MF-910 Series 1.5 hp 1.12 kw ft. lbs Nm 61MR-910 Series 1.0 hp 0.75 kw ft. lbs Nm 61MF MR-911 Code 1 & Code 3, 4 & Code 1 & Code 3, 4 & /4" Keyed 61MF :1 61MF :1 61MF :1 61MF :1 61MF :1 GENERAL Air Inlet: 3/8" NPT Air consumption: 55 cfm (1.56 m3/min) Offset (side-to-center) 1-1/4" Muffler 3/4" Keyed Spindle 61MR :1 61MR :1 61MR :1 61MR :1 61MR :1 Air Inlet: 3/8" NPT Air consumption: 50 cfm (1.42 m3/min) Offset (Side-to-Center) 1-1/2" 21
5 Accessories for Buckeye Motors Notes Each air motor is supplied with its appropriate muffler. Choice of foot mount brackets or flange mount is provided as no-cost option with purchase of motor...if specified. Muffler Identification A muffler is furnished for the common exhaust outlet on all reversible motors. If a 4-way valve is preferred to facilitate reversing, a muffler will be needed on the exhaust outlet of the valve. Flow restriction through the valve and muffler must be minimized in order to maintain maximum power output. If a valve is not used, another muffler will be required on the inlet port not being utilized for optional inlet flow Part Number Motor Series Mufflers MF MR MF MR MF MR MF MR Foot Mounts MF & 21MR MF & 31MR MF & 41MR MF & 61MR Flange Mounts MF & 21MR MF & 31MR MF & 41MR MF & 61MR 22 23
Pneumatic Power Motors
Pneumatic Power Motors Buckeye Dotco Gardner-Denver SP-104-EN 0405 10M Table of Contents ISO-9001 Quality System Certified...................... 1 Model Number Index.................................. 2
Stainless Steel Air-Vane Motors
Screwdriving technology Automation Air motors Air tools Stainless Steel Air-Vane Motors up to 1.2 kw / 1.6 Hp corrosion free oilfree sealed The DEPRAG line of air motors merges an attractive cost to power
* Contact your sales representative for compliance to NACE MR or later requirements.
VALVES & CONTROLS crosby SERIES 800, 900 OMNI-TRIM, AND BP OMNI-TRIM Crosby s Series 800 adjustable blowdown, Series 900 fixed blowdown OMNI-TRIM, and BP OMNI-TRIM full nozzle pressure relief valves have
Stands. MC55 Cylinder-Operated Stand With Linear Bearings. R55-S Lever-Operated Stand. D54 Lever-Operated Stand For SD, DM6, 2DM6 Motors
Stands MC55 Cylinder-Operated Stand With Linear Bearings Part No. 902914 Weight: 70.4lb (32kg) Max. Stroke: 4 in. (100mm) Max. Mounting Plate Load: 150lb (68kg) 8.66 9.84 40.16 7.05 25.43 Max approx. 1.57
Mobile 44 (0) Phone 44 (0) CHAPTER THREE Pipe Beveling Series
CHAPTER THREE Series MiniLathe power STaNDarD capacity* STD. LocKINg range* FeeD STroKe TorQUe MiniLathe Recommended for 2,2 kw 72 356,0 mm 72 348,0 mm 50 mm choice of three 3,0 hp 2,8 14,0 2,8 13,7 2
Program Features: AUTHORIZED SERVICE AGENT. Quality repairs using genuine IR parts Access to an IR owned service center
AUTHORIZED SERVICE AGENT Proper service of Ingersoll Rand/ARO air motors with quality-authorized parts will help prevent wear and tear, eliminate downtime and extend a product s life. That s why Ingersoll
Continuous Run Vent Unloaders
Continuous Run Vent Unloaders Mark 2 Load Genie The LGM 20 - Mark II is a self-contained unloading valve, which can be used wherever a continuous run compressor is required. The compressor may need to
3D drawings available at Kg GAS-NPT thread adapters available at page 1.117
These small dry vacuum pumps have a suction capacity of 2 and 4 cum/h. The particular shape of the working chamber and the special graphite, with which the locking flanges and vanes are made, allow these
Crosby Series BP OMNI-TRIM Pressure Relief Valves for applications involving variable back pressure.
CROSBY Crosby Series BP OMNI-TRIM Pressure Relief Valves for applications involving variable back pressure. Features The balanced piston design offsets the effects of variable back pressure on valve set
Industrial Air Motors
Industrial Air Motors AUTHORIZED SERVICE AGENT Proper service of Ingersoll-Rand/ARO air motors with quality-authorized parts will help prevent wear and tear, eliminate downtime and extend a product s life.
SIOUX TOOLS SIGNATURE SERIES PRODUCT BROCHURE SPECIALTY CLINCH NUT
SIOUX TOOLS SIGNATURE SERIES PRODUCT BROCHURE SPECIALTY CLINCH NUT S E R I E S SPECIALTY SIOUX TOOLS SIGNATURE SERIES PRODUCT BROCHURE Tool Selection / Order Guide Selecting the proper tool for your clinch
INDUSTRIAL AIR MOTORS
INDUSTRIAL AIR MOTORS www.airmotors.com AUTHORIZED SERVICE AGENT Proper service of Ingersoll-Rand/ARO air motors with quality-authorized parts will help prevent wear and tear, eliminate downtime and extend
Extended Grinders. Small Diameter Neck for Narrow Applications. Rugged Extension and Front End Design. Extreme Duty Extension Grinder
INFORMATION PAGE Page Number Tool Configuration Abrasive Size Model Series Power Output 50 51 Small Diameter Neck for Narrow Applications Rugged Extension and Front End Design s (3/8-24) 2 Inch Max. Mounted
Exploded view of OS 353CV, 81 x 133 mm Updated
Exploded view of OS 353CV, 81 x 133 mm Updated 11.05.2015 1 2 27 28 50 51 52 A 57 58 L 3 5 6 8 9 10 4 E 7 31 J 38 29 30 32 33 34 53 54 I 55 56 C D 59 60 61 62 63 11 F 12 39 35 36 37 73 13 40 TO INLET 71
Right Angle Die Grinders
Right Angle Die Grinders INFORMATION PAGES Section Contents Page Power Inserted Tooling Type/Size Features 22 250RAD 23 250RAED (3/8 ) Durable Head Design with Small Motor Durable Head Design & Extended
T PI Receiver-Controller
T-5800 Pneumatic Receiver-Controller Pneumatic Control Manual 717.1 Receiver-Controllers Section Product Bulletin T-5800 Issue Date 0386 Features High Volume Output Field Programmable Action and Readjustment
Output 0.9 H.P. (675 W) 9000 to R.P.M (11000rpm is standard)
HENRY TOOLS Industrial Airtools at Work General Safety and Maintenance Manual COLLET SPINDLE SHOWN Model Number Exhaust Direction Throttle Type 44RAE Side (L) Lever or (K) Safety Lever Speed 9000 to 11000
* Contact your sales representative for compliance to NACE MR or later requirements.
VALVES & CONTROLS crosby SERIES 00, 00 OMNI-TRIM, AND BP OMNI-TRIM Crosby s Series 00 adjustable blowdown, Series 00 fixed blowdown OMNI-TRIM, and BP OMNI-TRIM full nozzle pressure relief valves have a
Laboratory Evaluation Report for: Backflow Preventer for Beverage Dispensing Equipment
American Society of Sanitary Engineering Seal (Certification) Program Laboratory Evaluation Report for: Backflow Preventer for Beverage Dispensing Equipment Tested under ASSE Standard 1022 ASSE: 2003 ANSI:
Air Motors to 3.9 hp (0.16 to 2.9kW) Comprehensive range Lubrication free Stainless steel High torques. More Than Productivity
Air Motors 0.21 to 3.9 hp (0.16 to kw) Comprehensive range Lubrication free Stainless steel High torques More Than Productivity Why choose Desoutter Air Motors? Desoutter offers a wide range of rotating
Instrument Pressure Range Standard Body psi max. High Flow Rate Body psi max.
Basic Information All ESP Types Overall Size Length............................ 12 3/4-in. Max. Diameter All Piston Type...................... 2 1/4-in. Max. 2-in. Diaphragm..................... 2 7/8-in.
AIR MOTORS. 160 W to 2900 W Comprehensive range Lubrication free Stainless steel High torques. More Than Productivity
AIR MOTORS 160 W to 2900 W Comprehensive range Lubrication free Stainless steel High torques More Than Productivity Why choose Desoutter Air Motors? Desoutter offers a wide range of rotating vane air motors
Crosby Series 800 and 900 OMNI-TRIM Pressure Relief Valves. Flow Control
Crosby s Series 800 adjustable blowdown and Series 900 fixed blowdown OMNI-TRIM full nozzle pressure relief valves have a simplified, single trim design with superior application versatility. Features
Air Motors. 160 W to 2900 W Comprehensive range Lubrication free Stainless steel High torques. More Than Productivity
Air Motors 160 W to 2900 W Comprehensive range Lubrication free Stainless steel High torques More Than Productivity Why choose Desoutter Air Motors? Desoutter offers a wide range of rotating vane air motors
Air vane motors for special applications
Screwdriving technology Automation Air motors Air tools Air vane motors for special applications drilling motors 80-600 W milling motor 400 W grinding motors 150-1000 W robust and precise bearing high
The product information and specifications within this catalogue should be viewed as a guide only and are subject to change without notice.
Wheel gears... 3 Axial piston pumps... 3 Axial piston motors... 3 Winches... 4 Radial piston pumps... 4 Radial piston motors... 4 Slewing rings... 5 Gear pumps... 5 Gear flow dividers... 5 Cylinders...
drill point and thru spindle coolant systems positive mechanical depth stop
SPACEMATIC SPACEMATIC ULTRALITE ULTRALITE Model 1000II Model 2000 TM TM DRILLING MACHINES Standard Features Optional Features ergonomic design air pressure intensifier for increased thrust consistent clamp
Technical data TAD740GE
Technical data TAD740GE General In-line four stroke diesel engine with direct injection Turbo charged and air to air intercooled Rotation direction, anti-clockwise viewed towards flywheel Number of cylinders
SHOP AIR SUPPLY. All Carr Lane toggle clamps are DFARS and RoHS compliant.
FILTER/REGULATOR/LUBRICATOR - CLR-100-FRL SHOP AIR SUPPLY 4-WAY AIR VALVE CL-14-PCAV (2) SILENCERS CL-14-PCEM CHECK VALVE - CLR-224-ACV All Carr Lane toggle clamps are DFARS and RoHS compliant. 200 lbs
Mark 695 Series. Pressure Regulators Mark 695 Piloted Tank Blanketing Regulators. Piloted Tank Blanketing Regulator 3/4"- 1" Optional Features
Mark 695 Series Piloted Tank Blanketing Regulator 3/4"- 1" The Mark 695 Series piloted soft seat regulator was designed specifically to provide accurate pressure control on very low pressure tank blanketing
Model 6. Power Wheel. Planetary Gear Drive
Model 6 Power Wheel Planetary Gear Drive CONTENTS Introduction 3 Model 6 Wheel Drives - Single & Double Reduction 4-5 Model 6 Wheel Drives w/a2 Series Integral Parking Brake - Single & Double Reduction
ST600 Series. #1 Starter in the mining industry for use with air only
Air Starters ST600 Series #1 Starter in the mining industry for use with air only For engine displacement of: Diesel 1000 to 5000 CID (16 to 80 liters) Carburated 2000 to 10,000 CID (32 to 160 liters)
PNEUMATIC MIXERS. Laboratory Stirrers
PNEUMATIC MIXERS Laboratory Stirrers - Laboratory clamp mount, direct drive for stirring liquids up to 400 centipoise in vessels up to 5 gallons - 1/6 hp air motor,1/4 NPS-M inlet air connection, muffler
50 HERTZ METRIC BLOWER
CAPACITIES 50 HERTZ METRIC BLOWER Pressure Range 500mm 20 wc 12 osi 700mm 27 wc 16 osi 900mm 35 wc 20 osi 1100mm 43 wc 24 osi Model Number TBA 500-1.5 TBA 500-2.2 TBA 500-3 TBA 500-4 TBA 500-5.5 TBA 500-
MITSUBISHI DIESEL ENGINE IFM NO. JN (1/6) TECHNICAL INFORMATION DATE Aug. 8, 2002
DIESEL ENGINE IFM NO. JN02411-011(1/6) TECHNICAL INFORMATION DATE Aug. 8, 2002 TITLE Specification Sheets of S6U-MPTK Engine (IMO Certified Engine) Specification Sheets of S6U-MPTK Engine that is satisfied
AIRLINE EQUIPMENT CATALOGUE //
AIRLINE EQUIPMENT CATALOGUE // 16 15 14 13 12 11 10 9 The Fort Vale Range of Airline Ball & Butterfly Valves 8 Fort Vale Engineering Ltd. 2014 THIS PAGE IS INTENTIONALLY BLANK AIRLINE VALVE CATALOGUE //
MOVICONTROL. Single and Double Fixed Vane Pumps SERIES V10, V20, 25V/VQ, 35V/VQ, 45V/VQ.
Single and Double Fixed Vane Pumps SERIES V10, V20, 25V/VQ, 35V/VQ, 45V/VQ www.movicontrol.com.br V10/V20 Series Features Balanced vane type pumps are excellent for medium- to low-pressure mobile and industrial
PRESSURES TO 740 PSIG (51 BARG) TEMPERATURES TO 800 F (427 C) MODELS. 300Y Series Ordering Code. Add l Inlet Size Model Body Dash Perf Mesh Require-
APPLICATIONS Steam, liquid, gas and oil service Power industry Pulp and paper Chemical industry Process Equipment Metal & Mining Water & Waste OPTIONS Other perforated screens and mesh liners Other drain
POWERS Controls. Technical Instructions Document No P25 AP December 3, No. 6 Pneumatic Damper Actuator.
POWERS Controls No. 6 Pneumatic Damper Actuator Technical Instructions AP 331-3 331-2793 Actuator 331-2857 Actuator with Clevis and Pin 331-3012 Extended Shaft and Frame Mounting Description The POWERS
Surface drilling rig. Explorac R50 on truck. Atlas Copco Exploration Products. Features
Atlas Copco Exploration Products Surface drilling rig Explorac R50 on truck It is a robust and reliable drill unit, making it ideal for remote areas. It is designed to perform an outstanding base platform
High torque stainless steel motors ADVANCED LINE. Stainless Steel Air Motors from 20 W / 0.03 Hp up to 1.2 kw / 1.6 Hp
Screwdriving technology Automation Air motors Air tools ADVANCED LINE Stainless Steel Air s from 20 W / 0.03 Hp up to 1.2 kw / 1.6 Hp NEW MOTOR RANGE High torque motors made from stainless steel: Our ADVANCED
AIR/VACUUM VALVE AND OPTIONAL ANTI-SLAM DEVICE SPECIFICATION
AIR/VACUUM AND OPTIONAL ANTI-SLAM DEVICE SPECIFICATION Scope. This specification is intended to cover the design, manufacture, and testing of / in. (3 mm) through 0 in. (00 mm) Air/Vacuum Valves suitable
LVG SERIES. Gas Limiting Orifice Valve. Features. Benefits. Combustion Excellence Since 1888 LVG-1
Gas Limiting Orifice Valve Features Precision machined valve flow piston Rugged cast iron body Replaceable cartridge assembly for LVG 55-5 Straight through valve design; right angle valve option Pressure
SIOUX TOOLS SIGNATURE SERIES PRODUCT BROCHURE SPECIALTY CLINCH NUT
SIOUX TOOLS SIGNATURE SERIES PRODUCT BROCHURE SPECIALTY CLINCH NUT S E R I E S SPECIALTY SIOUX TOOLS SIGNATURE SERIES PRODUCT BROCHURE Tool Selection / Order Guide Selecting the proper tool for your clinch
air pressure intensifier for increased thrust consistent clamp force min to max collet spacing ergonomic design
Formerly Hi-Shear Tooling Official Distributor: SPACEMATIC Wm. Lees & Sons Ltd. United Kingdom Telephone: +44 (0) 1698 426662 Email: sales@ Website: ULTRALITE TM DRILLING MACHINES Model 1000II Standard
Part No. Description Part No. Description
Hand Tool Part No. Description 804-1 Blow Mold Case 804-2 19 1/2 Extension Tube 804-3 16 1/2 Extension Tube 804-4 8 1/2 Extension Tube 804-5 5 Extension Tube 804-6 3 1/4 Extension Tube 804-7 Serrated Saddle
ADVANCED LINE. All airmotors can also be used without lubrication.
Screwdriving technology Automation Air motors Air tools ADVANCED LINE Stainless Steel Air s from 20 W / 0.03 Hp up to 1.2 kw / 1.6 Hp NEW MOTOR RANGE High torque motors made from stainless steel: Our ADVANCED
Husky 3275 Aluminum Pumps Air-Operated Double-Diaphragm
Husky 3275 Aluminum Pumps Air-Operated Double-Diaphragm Features or bspt is externally serviceable Typical Applications Husky 3275 Aluminum DK3XXX Typical Fluids Handled 50 PROCESS EQUIPMENT CATALOG Husky
Belt Sanders. Power output 300 W, 500 W (.40,.67 HP)
Screwdriving technology Automation Air motors Air tools Belt Sanders Power output 300 W, 500 W (.40,.67 HP) high power output at a low weight highly durable operates in hard-to-reach areas grinding of
Mfg. No: , 2,400 PSI Craftsman
Parts Manual Mfg. No: 1434-2 580.768342, 2,400 PSI Craftsman Copyright Briggs and Stratton. All Rights reserved 19-Jan-2018 Model Components Table Of Contents Page Air Cleaner...........................................................................................
MODEL CA100 CARBURETOR
MODEL CA100 CARBURETOR The Model 100 is a single diaphragm air-gas valve carburetor/mixer. It offers a 90 degree air inlet to provide low overhead clearance, and is available with several Air Horn and
CLK Series Air Chain Hoist Distributed by Tri-State Equipment Company Inc. Web:
CLK Series Air Chain Hoist Distributed by Tri-State Equipment Company Inc. Email: sales@tsoverheadcrane.com Web: www.tsoverheadcrane.com PH: 314-869-7200 FAX: 314-869-7226 Industry-leading durability,
1 JULY ~ 30 AUGUST 2013 Micro - Tec
*All Prices Excl VAT* WINTER SPECIALS E&OE 1 JULY ~ 30 AUGUST 2013 KI-1312 R1 277.00 Sq. Dr Heavy Duty Composite Mini * Impact Wrench *Handle Exhaust with Muffler Sq. Dr: : 11000RPM : Max Torque: 60 NM
Technical data TAD1242GE. General
General In-line four stroke diesel engine with direct injection. Rotation direction, anti-clockwise viewed towards flywheel. Turbocharged Number of cylinders 6 Displacement, total litre 12,13 in 3 740,2
Technical data TAD1241GE. General
General In-line four stroke diesel engine with direct injection. Rotation direction, anti-clockwise viewed towards flywheel. Turbocharged Number of cylinders 6 Displacement, total litre 12,13 in 3 740,2
MODEL CA125 CARBURETOR
MODEL CA125 CARBURETOR The Model 125 carburetor is a single-diaphragm air valve carburetor/mixer for applications requiring air flow up to 235 CFM (111 L/s). It offers a down draft air inlet that can be
Model RVL-20. Stainless Steel Low-Pressure Diaphragm Relief Valve
Phone (toll-free): (888) 380-9660 Phone (local): (973) 340-9955 Fax: (973) 340-9933 Web: www.straval.com 21 Columbus Avenue Garfield, NJ 07026 Model RVL-20 Stainless Steel Low-Pressure Diaphragm Relief
JOHN DEERE AG & TURF DIVISION
JOHN DEERE AG & TURF DIVISION Pressure Washer 020449-0 PARTS 312621 MANUAL North American Edition Litho in USA Table Of Contents PRODUCT COMPONENTS PAGES Main Unit... 4 Pump... 6 Torque Specification
Edition 7 February QA4 Air Angle Wrench and Nut Runner. Parts Information. Save These Instructions
80603 Edition 7 February 0 QA Air Angle Wrench and Nut Runner Parts Information Save These Instructions Module - Exploded View 8 7 5 6 8 3 0 9 9 5 0 5 53 5 7 55 3 0 56 57 6 7 5 3 33 3 8 9 6 63 6 65 66
Special Applications Require Special Tools
Index Routers.................. 102-103 Tappers..................... 104 Clinch Nut Tools.............. 106 Rivet Shavers................ 107 Skin Clamp Runners........... 108 Saws................... 109-110
Power where you need it...when you need it!!!
Important This Technical Data Sheet and the corresponding Installation Instructions provide important information to ensure the installed engine will operate according to the design specification in the
Power where you need it...when you need it!!!
Important This Technical Data Sheet and the corresponding Installation Instructions provide important information to ensure the installed engine will operate according to the design specification in the
TEMPERATURE REGULATORS W91/W94 Series
Self-Operated Temperature Regulators Watson McDaniel reserves the right to change the designs and/or materials of its products without notice. 2010 Watson McDaniel Company Self-Operating Design Indicating
Precision Grinders 50, ,000 RPM
Precision Grinders 50,000 100,000 RPM 0.06 0.2 hp (0.044 0.015 kw) Variety of configurations to meet all your application needs Ideal for precision deburring and metal removal Turbine, governed and nongoverned
10.5 gal. Vertical Oil Lubricated Air Compressor
10.5 gal. Vertical Oil Lubricated Air Compressor Model No. AC1104 Tank volume: 10.5 gal. (40 L) Direct drive Oil-lubricated single cylinder pump for durability and long life triple the pump life of comparable
4405-RA 4405-R 4405-RA 4405-R S
ACCESSORIES Page 34 Master Parts Breakdowns Updated Feb. 1st 2006 Master Parts Breakdowns Updated Feb. 1st 2006 Page 35 This tool is designed to operate on 90 psig (6.2 bar) maximum air pressure with 1/4
RD20II RD20III Worldwide Dealer Network Worldwide Product Support Worldwide Availability Atlas Copco Drilling Solutions Inc.
Atlas Copco RD20 The RD20 Advantage equals power, performance, and mobility Powerful Feed System The patented carriage feed system is the heart of the RD20. It delivers a full 110,000 lb. (49,896 kg) of
ADVANCED LINE. NEW MOTOR RANGE non corrosive ATEX conform oil-free sealed sterilisable compact insensitive to cleaning solvents
Screwdriving technology Automation Air motors Air tools ADVANCED LINE Stainless Steel Air s from 20 W / 0.03 Hp up to 1.2 kw / 1.6 Hp NEW MOTOR RANGE non corrosive ATEX conform oil-free sealed sterilisable
Model 2000 Control Valves Technical Sales Bulletin
Features Configuration Globe valve with screwed-on bonnet, unbalanced, post-guided valve plug, screwed-in metal seat ring construction, and push-down-to close valve plug action. Low Temperature Construction
PROFLEX FLEXIBLE SPRINKLER HOSES (PAGE 1/5)
FLEXIBLE SPRINKLER HOSES (PAGE 1/5) DESCRIPTION A flexible sprinkler hose assembly consists of a braided or unbraided hose with on one side an inlet connection for the branch line, and on the other side
OptiDrive VSD Intelligent Variable Speed and Torque Solution for AFCs 4160 volt technical specifications
Intelligent Variable Speed and Torque Solution for AFCs 416 volt technical specifications Table of contents VSD41-5-65 416 Volts, 5 kw / 67 hp 3 VSD41-63-65 416 Volts, 63 kw / 845 hp 5 VSD41-85-78 416
Syntron Pneumatic Vibrators
Pneumatic Vibrators Syntron Pneumatic Vibrators Syntron Material Handling offers two types of Syntron Pneumatic Vibrators turbine and piston. Turbine models feature rotary action designed to keep noise
Straight Drills. ergonomic optimum power-to-weight ratio simple operation high variability, customer-specific solutions
Screwdriving Technology Automation Air Motors Air Tools Straight Drills ergonomic optimum power-to-weight ratio simple operation high variability, customer-specific solutions Our line of drills are especially
Constant High Speed and Torque Motor Mount Series 25,000RPM - 65,000RPM <1.4HP / 1.04kW
Constant High Speed and Torque Motor Mount Series 25,000RPM - 65,000RPM
UNP Series Pneumatic Power Clamp
Features Conforms to Standards Blade and foot mounting Fully adjustable opening angle Opening angle can be set with or without air pressure Unique linkage design ensures positional repeatability Linear
Force 5 Offshore Man Rider Series 330 to 6870 lb (150 to 3117 kg) capacity
Known worldwide as the standard for meeting the toughest personnel lifting requirements in the offshore industry. ual rated for personnel and utility lifting applications, these winches have Type Approval
Model 8. Power Wheel. Planetary Gear Drive
Model 8 Power Wheel Planetary Gear Drive CONTENTS Introduction 3 Model 8 Wheel Drives - Double Reduction 4-5 Model 8 Wheel Drives w/a2 Series Integral Parking Brake - Double Reduction 6-7 Model 8 Shaft
Check valve series. SHCV, SOCV, SOACV, SACV Series. Phone: Fax: Wimbledon Rd.
Check valve series SHCV, SOCV, SOACV, SACV HIGH PRESSURE CHECK VALVES SHCV SERIES Features Pressure rating up to 6,000psig(413bar) at 70 (20 ) Temperature rating up to 375 (190 ) with viton seal standard
Spring loaded Thermal Relief Safety Valves, manufacturers standard Medium and high pressure
Series Thermal Relief Safety Valves Spring loaded Thermal Relief Safety Valves, manufacturers standard Medium and high pressure Applications The Sempell series provides a complete and comprehensive range
105 Commerce Way Westminster, SC Tel: (864) Fax: (864)
ITT Conoflow 105 Commerce Way Westminster, SC 29693 Tel: (864) 647-9521 Fax: (864) 647-9574 WARNING Conoflow s products are designed and manufactured using materials and workmanship required to meet all
Ball Valves. Seal Welded Style BVS2...2 Carbon Steel Technical Data 2200 PSI ¼ Stainless Steel Technical Data 2160 PSI ¼
Ball Valves Seal Welded Style BVS2...2 Carbon Steel Technical Data 2200 PSI ¼ - 4...3 316 Stainless Steel Technical Data 2160 PSI ¼ - 4...3 Style BVSC...4 Carbon Steel Technical Data 2200 PSI ¼ - 2...5
Maintenance Information
04581245 Edition 2 May 2014 Air Grinder, Die Grinder and Sander Series G2 (Angle) Maintenance Information Save These Instructions Product Safety Information WARNING Failure to observe the following warnings,
C/SSC. FLUID COOLING Shell & Tube C & SSC Series. Features. Materials SSC Series. Ratings Standard. Materials C Series.
FLUID COOLING Shell & Tube Series COPPER/STEEL OR STAINLESS STEEL CONSTRUCTION Features API/BASCO Interchange ASME Code Option Preferred for New Oil-Water Applications C-Series / SSC Series Rugged Steel
Figure 1. Locating Vibrators and Reinforcing Beams on Hoppers. Table I. Reinforcement Channel Selection CAUTION
Vibrolator Ball Vibrator Installation Instructions! DANGER Before installing equipment, turn off and lock out/tag out all energy sources to the hopper, conveyor, and/or conveyor accessories according to
BCV Blowdown Control Valves DN15 to DN50 (½" to 2")
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
3-Way Linked Globe Valve Assemblies with Linear Series Actuators
Linked Globe Valve ssemblies with Linear Series ctuators Note: hoose a valve assembly having a close-off pressure capability sufficient for the application. Not all valve body and actuator combinations
MODELS 45 RA 45 RAC 45 RAZ 45 RAS
General Safety and Maintenance Manual Model Number 45RA 45RAZ 45RAS 45RAC SERIES PNEUMATIC RIGHT ANGLE GRINDER Exhaust Direction Side Throttle Type (L) Lever or (K) Safety Lever Speed 12000 to 14000 R.P.M
Non Cycling Refrigerated Dryer
Model Name D340INA D420INA D510INA D680INA D850INA Rated Flow (cfm) 200 250 300 400 500 Pressure Drop (Psig) 1.60 2.00 2.00 2.90 2.90 Condensate Produced (Gal/Hr) 0.50 0.62 0.74 0.99 1.24 Installed Package
Hexagonal Bar Stock Needle Valve
Hexagonal Bar Stock Needle Valve HBNV Series Features Maximum working pressure: 6000 psi (414bar) at 100 F (38 C) 10000 psi (690bar) at 100 F (38 C) Working temperature: -65 F (-54 C) to 464 F (240 C)
INSTRUCTION AND MAINTENANCE MANUAL FR95 PRESSURE REGULATOR
Enidine / Conoflow 105 Commerce Way Westminster, SC 29693 Tel: (864) 647-9521 Fax: (864) 647-7993 WARNING Conoflow s products are designed and manufactured using materials and workmanship required to meet
Capacity regulators (hot gas bypass) PMC and CVC
MAKING MODERN LIVING POSSIBLE Technical brochure Capacity regulators (hot gas bypass) PMC and CVC The PMC and CVC is used for capacity regulation in refrigeration, freezing and air conditioning plant for
LIFTING DEVICE, duplex filter / in-line filter Series AHV
Series AHV Page 1/6 The lifting devices are intended for the maintenance of filters with blind fange filter lids. They are required, if on the site of the filter no other hoisting devices are available
Berkeley 8T-550 Submersible Turbine
Berkeley 8T-55 9 3 Nominal RPM: 345 Maximum Working Pressure: 485 PSI 1 8 27 3 HP 9 7 24 25 HP 8 6 21 2 HP 7 5 4 3 18 15 12 9 15 HP 1 HP 6 5 4 3 Efficiency % 2 6 2 1 3 1 1 2 3 4 5 6 7 8.19" (with 6" mtr.)
PLACING THE MOTOR IN SERVICE
04579413 Form P7620 Edition 1 May, 2003 OPERATION AND MAINTENANCE MANUAL for SM2AM AIR MOTOR (Dwg. MHP2541) IMPORTANT SAFETY INFORMATION ENCLOSED - SAVE THESE INSTRUCTIONS READ AND UNDERSTAND THIS MANUAL
Hydraulic Concentrate Control Valve
Hydraulic Concentrate Control Valve DESCRIPTION The standard hydraulic actuated valve assembly consists of a factory assembled and tested quarter turn regular port ball valve to which a hydraulic actuator
Edition 4 October Air Screwdrivers. Series QS Inline Push-to-Start Screwdriver. Parts Information. Save These Instructions
16574493 Edition 4 October 2013 Air Screwdrivers Series QS Inline Push-to-Start Screwdriver Parts Information Save These Instructions QS Inline Push-To-Start Motor and Gearing - Exploded View 28 27 26
(ST-B1 / ST-B2 / ST-B3 / ST-B4) CAST IRON INVERTED BUCKET STEAM TRAP
(ST-B1 / ST-B2 / ST-B3 / ST-B4) CAST INVERTED BUCKET STEAM TRAP ST-B1B2 ST-B3 ST-B4 (ST-B1 / ST-B2 / ST-B3 / ST-B4) CAST INVERTED BUCKET STEAM TRAP MATERIAL PARTS Cap and Body Valve Seat Valve Gasket Material
Aftertreatmnet System DOC DOC + SCR
DOOSAN INFRACORE INDUSTRIAL ENGINE D34 Intermittent rating kw(hp) / rpm 54 (74) / 2400 330 (33.7) / 1400 63 (85) / 2400 325 (33.1) / 1600 69 (92) / 2400 350 (35.7) / 1600 75 (100) / 2400 375 (38.2) / 1600
Mufflers. Absorptive, Reactive, Reactive Lined, Reactive Side Entry, Reactive Side Entry Lined
V1 Mufflers Absorptive, Reactive, Reactive Lined, Reactive Side Entry, Reactive Side Entry Lined NCS Acoustics provide a range of Mufflers for industrial applications; Absorptive, Reactive and Lined Reactive.
LX SERIES Low-Pressure Gas Compressors
70 to 140 psi Inlet Pressure Pressure 1500 PSI 70 80 90 100 110 120 130 140 C1.5-03-70/140LX 3 3.3 3.9 4.4 4.8 5.1 5.6 6.1 6.6 C1.5-05-70/140LX 5 5.4 6.3 7.2 7.8 8.4 9.1 10.0 10.7 C1.5-10-70/140LX 10 10.2