Piston Accumulators Series Catalog HY /US
|
|
- Chrystal Armstrong
- 5 years ago
- Views:
Transcription
1 Series 3000 Series 3000 Heavy uty Service with 3000 PSI Operating Pressure 2" thru 12" ores with Over 50 Standard apacities Patented V-O-ring Piston Seals Serviceable Threaded End onstruction Five Standard Seal Options to Handle a Variety of Fluids and Temperatures SME ertification and E Marking vailable 22 Parker Hannifin orporation ccumulator ivision Rockford, Illinois US
2 Specifications Series 3000 Materials Shell high strength alloy steel aps steel Pistons aluminum (2" thru 8"), ductile iron (9" & 12") artridge steel Protector steel Piston Glide Rings PTFE Piston & End Seals various polymers Piston Seal ackups PTFE ctual ore Sizes & Maximum Flow Rates Pressure Ratings Nominal ctual ore Size Max. Recommended Flow* ore Size (in.) (in.) (mm) GPM LPM *Note: ased on 120 in/sec maximum piston speed, port & fitting size will become limiting factors for most applications. Parker Series 3000 piston accumulators are rated at 3000 psi and a minimum 4 to 1 design factor. For pressures over 3000 psi, see Series 4000 and Series 5000 accumulators. Fluids Parker s piston accumulators are compatible with a wide variety of fluids. Standard accumulators (with nitrile seals) may be used with petroleum-based industrial oils or water-based flame resistant fluids. Optional seals compatible with most industrial fluids are available with temperature ranges from -45 F to 325 F (-43 to 162 ). Standard s The following ports are supplied as standard on all fluid ends and on the gas end of accumulators ordered for use with gas bottles: Notes: 1) For flange dimensions, see tables below. 2) On standard 7", 8" & 9" bore accumulators, both SE Straight Thread and Flange ports are available as standard. Omit port code for SE #32 Straight Thread, specify PL port code for 2" ode 61 Flange when ordering. Flange ports are recommended at operating pressures above 2000 PSI due to pressure limitations of most #32 SE Straight Thread fittings. Standard s Standard Models Metric Models ore SPP Metric SE Size SE SE Flange 1 (in) Flange 1 2 #12 3/4 3 # # #24 1-1/2 7 #32 2" ode 61 2" ode 61 8 #32 2" ode 61 2" ode 61 9 #32 2" ode 61 2" ode " ode 61 3" ode 61 1) See flange dimensions in Options. s Two types of gas valves are available on Series 3000 piston accumulators and gas bottles. Units with 2" thru 6" bores, are offered with a cored gas valve cartridge (ISO V1) as standard. ll 7" thru 12" bore units are supplied with a heavy duty (military) poppet-type gas valve cartridge (MS ) as standard. Note: The Parker standard gas cap will accept either style gas valve. Precharge Units are shipped with a nominal nitrogen precharge as standard. For specific precharge pressures, specify at the time of order. #5 SE THRE 1/2 20 UNF-2 1/2 20 UNF-2 uxiliary Gas ottles When space does not permit the installation of the required piston accumulator, a smaller accumulator may be used by connecting it to an auxiliary gas bottle(s) that can be located in a nearby spot where space is available. In some cases, a piston accumulator and gas bottle combination may be more economical, especially large capacity sizes. Piston travel, confined to the accumulator, must be calculated with ample margins to store the required fluid. vailable Options If your application requires a piston accumulator, gas bottle, or special option that falls outside of Parker s broad offering, consult your local distributor, Parker representative, or the factory with your specific requirements. Parker has the manufacturing and engineering expertise to design and build piston accumulators to your exacting requirements, from simple modifications of standard units to complete designs. Some example of Parker s past special designs include: Special and Stainless Steel Materials Piston Position and Velocity Sensors and Switches Water Service Non-Standard apacities 23 Parker Hannifin orporation ccumulator ivision Rockford, Illinois US
3 Models, apacities and imensions Series 3000 Small ore 3000 PSI for Oil and Water Service G epth ored (see note) Threaded F ia. olt ircle Flange Model No. 1 Fluid - Gas Oil Volume Volume S Tube E F G Weight Service (gal) (cu in) (cu in) (in) (in) (in) No. Size (in) Size (in) (in) (in) (lbs) 2N00051K N00101K N00151K / /4 6 2N00291K 1 Pint N00581K 1 Quart N00291K 1 Pint N00581K 1 Quart N00901K 1.5 Liter / /4 3/ N01161K 1/2 Gal N01831K 3 Liter N00581K 1 Quart N01161K 1/2 Gal N02311K 1 Gal / /4 1/ N03471K 1-1/2 Gal N05781K 2-1/2 Gal N02311K 1 Gal N03471K 1-1/2 Gal N05781K 2-1/2 Gal N09241K 4 Gal / /2 1/ N11551K 5 Gal N17331K 7-1/2 Gal N23101K 10 Gal Notes: 1) For Water Service add W after construction code, see How to Order information. 2) See Options for complete listing of optional ports. 3) SME ertified and E marked accumulators and gas bottles are available. 4) When accumulators are to be used with gas bottles, order ccumulators for Use with Gas ottles." 5) 2", 3", 4" & 6" bores standard with cored gas valves. Poppet type (MS ) gas valve available as an option. 24 Parker Hannifin orporation ccumulator ivision Rockford, Illinois US
4 Models, apacities and imensions Series 3000 Small ore 3000 PSI ccumulators for Use with Gas ottles Typical oth Ends G epth Gas Threaded F ia. olt ircle Flange Fluid (oth Ends) Gas ccumulator Volume Volume S Tube E F G Weight Model No. (gal) (cu in) (cu in) (in) (in) No. Size (in) Size (in) (in) (in) (lbs) 4N00583KTFTF 1 Quart N01163KTFTF 1/2 Gal N02313KTFTF 1 Gal / /4 1/ N03473KTFTF 1-1/2 Gal N05783KTFTF 2-1/2 Gal N02313KTGTG 1 Gal N03473KTGTG 1-1/2 Gal N05783KTGTG 2-1/2 Gal N09243KTGTG 4 Gal / /2 1/ N11553KTGTG 5 Gal N17333KTGTG 7-1/2 Gal N23103KTGTG 10 Gal PSI uxiliary Gas ottles G epth Type (see note) Threaded F ia. olt ircle Flange Model No. Gas Volume Gas Nominal ctual S Tube E F G Weight ottle (gal) (cu in) (in) (in) (in) No. Size (in) Size (in) (in) (in) (lbs) 4N00581K 1 Quart N01161K 1/2 Gal N02311K 1 Gal / /4 1/ N03471K 1-1/2 Gal N05781K 2-1/2 Gal N02311K 1 Gal N03471K 1-1/2 Gal N05781K 2-1/2 Gal N09241K 4 Gal / /2 1/ N11551K 5 Gal N17331K 7-1/2 Gal N23101K 10 Gal Parker Hannifin orporation ccumulator ivision Rockford, Illinois US
5 Models, apacities and imensions Series 3000 Small ore 207 ar Metric ccumulators for Oil and Water Service G epth ored (see note) Threaded F ia. olt ircle Flange Model No. 1 Fluid Gas - Oil Volume Volume SPP/G SE E F G Weight Service (Liters) (cu in) (Liters) (mm) (mm) (mm) (in) Flange (mm) (mm) (mm) (Kg) 2N00052K N00102K N00152K / N00292K N00582K N00292K N00582K N00902K M N01162K N01832K N00582K N01162K N02312K M N03472K N05782K N02312K N03472K N05782K N09242K /2 M N11552K N17332K N23102K Notes: 1) For Water Service add W after construction code, see How to Order information. 2) See Options for complete listing of port options. 3) SME ertified and E marked accumulators and gas bottles are available. 4) When accumulators are to be used with gas bottles, order "ccumulators for Use with Gas ottles." 5) 2", 3", 4" & 6" bores standard with cored gas valves. Poppet type (MS ) gas valves available as an option. 26 Parker Hannifin orporation ccumulator ivision Rockford, Illinois US
6 Models, apacities and imensions Series 3000 Small ore 207 ar Metric ccumulators for Use with Gas ottles Typical oth Ends G epth Gas Threaded F ia. olt ircle Flange Fluid - (oth Ends) Gas ccumulator Volume Volume SPP/G SE E F G Weight Model No. (Liters) (cu in) (Liters) (mm) (mm) (in) Flange (mm) (mm) (mm) (Kg) 4N00582KRR N01162KRR N02312KRR M N03472KRR N05782KRR N02312KRFRF N03472KRFRF N05782KRFRF N09242KRFRF /2 M N11552KRFRF N17332KRFRF N23102KRFRF ar Metric uxiliary Gas ottles G epth Type (see note) Threaded F ia. olt ircle Flange Model No. Gas Volume - Gas Nominal ctual SPP/G SE E F G Weight ottle (gal) (liters) (mm) (mm) (mm) (in) Flange (mm) (mm) (mm) (Kg) 4N00582K 1 Quart N01162K 1/2 Gal N02312K 1 Gal M N03472K 1-1/2 Gal N05782K 2-1/2 Gal N02312K 1 Gal N03472K 1-1/2 Gal N05782K 2-1/2 Gal N09242K 4 Gal /2 M N11552K 5 Gal N17332K 7-1/2 Gal N23102K 10 Gal Parker Hannifin orporation ccumulator ivision Rockford, Illinois US
7 Models, apacities and imensions Series 3000 Large ore 3000 PSI for Oil and Water Service G epth High Pressure MS Threaded F ia. olt ircle Flange Model No. 1 Fluid - Gas Oil Volume Volume S Tube E F G Weight Service (gal) (cu in) (cu in) (in) (in) (in) No. Size (in) Size (in) (in) (in) (lbs) 7K05783KPL 2-1/2 Gal / K11553KPL 5 Gal K17333KPL 7-1/2 Gal or 5/ K23103KPL 10 Gal ± ode K34653KPL 15 Gal Flange (PL) K57753KPL 25 Gal K23103KPL 10 Gal / K34653KPL 15 Gal K46203KPL 20 Gal or 3/ K57753KPL 25 Gal ± ode K69303KPL 30 Gal Flange (PL) K57751K 25 Gal " SE Flange K69301K 30 Gal s (ode 61) 7/ K92401K 40 Gal ± See Options (6X) K115501K 50 Gal for imensions 2108 The Minimum esign Metal Temperature (MMT) for SME certified 7 and 9 piston accumulators presented in this section is 20 F (-7 ). The Minimum esign Metal Temperature (MMT) for SME certified 12 piston accumulators presented in this section is 32 F (0 ). Notes: 1) For Water Service add W after construction code, see How to Order information. 2) Most SE #32 fittings are rated for 2000 PSI. If 2000 to 3000 PSI service is required, two options are available; order accumulator with optional standard 2" SE ode 61 4-bolt flange port by specifying PL code when ordering or order the accumulator with a SE #24 port or smaller, see Options for dimensions and How to Order. 3) See Options for complete listing of optional ports. 4) SME ertified and E marked accumulators and gas bottles are available. 5) When accumulators are to be used with gas bottles, order ccumulators for Use with Gas ottles. 6) Poppet type (MS ) gas valve standard. 28 Parker Hannifin orporation ccumulator ivision Rockford, Illinois US
8 Models, apacities and imensions Series 3000 Large ore 3000 PSI ccumulators for Use with Gas ottles Typical oth Ends G epth Gas Threaded F ia. olt ircle Flange Fluid Gas ccumulator Volume Volume E F G Weight Model No. (gal) (cu in) (cu in) (in) (in) (oth Ends)(in) (in) (in) (lbs) 7K05783KPLPL 2-1/2 Gal K11553KPLPL 5 Gal " ode 61 Flange (PL) K17333KPLPL 7-1/2 Gal or 5/ K23103KPLPL 10 Gal ± #32 SE Straight Thread 340 7K34653KPLPL 15 Gal K23103KPLPL 10 Gal K34653KPLPL 15 Gal " ode 61 Flange (PL) K46203KPLPL 20 Gal or 3/ K57753KPLPL 25 Gal ± #32 SE Straight Thread K69303KPLPL 30 Gal K57753KPNPN 25 Gal " SE Flange K69303KPNPN 30 Gal s (ode 61) / K92403KPNPN 40 Gal ± See Options 1799 (6X) 12K115503KPNPN 50 Gal for imensions PSI uxiliary Gas ottles G epth High Pressure MS Threaded F ia. olt ircle Flange Model No. Gas Volume Gas Nominal ctual E F G Weight ottle (gal) (cu in) (in) (in) (in) (in) (in) (in) (lbs) 7K05783K(PL) 2-1/2 Gal K11553K(PL) 5 Gal " ode 61 Flange (PL) K17333K(PL) 7-1/2 Gal or 5/ K23103K(PL) 10 Gal ± #32 SE Straight Thread 331 7K34653K(PL) 15 Gal K23103K(PL) 10 Gal K34653K(PL) 15 Gal " ode 61 Flange (PL) K46203K(PL) 20 Gal or 3/ K57753K(PL) 25 Gal ± #32 SE Straight Thread K69303K(PL) 30 Gal K57751K 25 Gal " SE Flange K69301K 30 Gal s (ode 61) 7/ K92401K 40 Gal ± See Options (6X) K115501K 50 Gal for imensions Parker Hannifin orporation ccumulator ivision Rockford, Illinois US
9 Models, apacities and imensions Series 3000 Large ore 207 ar Metric ccumulators for Oil and Water Service G epth High Pressure MS Threaded F ia. olt ircle Flange Model No. 1 Fluid Gas - Oil Volume Volume SPP/G SE E F G Weight Service (Liters) (cu in) (Liters) (mm) (mm) (mm) (in) Flange (mm) (mm) (mm) (Kg) 7K05782K K11552K " Metric 103 7K17332K ode 61 M K23102K ± Flange 154 7K34652K K23102K K34652K "Metric 344 9K46202K ode 61 M K57752K ± Flange 491 9K69302K K57752K " Metric 12K69302K M ode K92402K ± (6X) 816 Flange 12K115502K Notes: 1) For Water Service add W after construction code, see How to Order information. 2) Most SE #32 fittings are rated for 2000 PSI. If 2000 to 3000 PSI service is required, two options are available; order accumulator with optional standard 2" SE ode 61 4-bolt flange port by specifying PL code when ordering or order the accumulator with a SE #24 port or smaller, see Options for dimensions and How to Order. 3) See Options for complete listing of optional ports. 4) SME ertified and E marked accumulators and gas bottles are available. 5) When accumulators are to be used with gas bottles, order ccumulators for Use with Gas ottles. 6) Poppet type (MS ) gas valve standard. 30 Parker Hannifin orporation ccumulator ivision Rockford, Illinois US
10 Models, apacities and imensions Series 3000 Large ore 207 ar Metric ccumulators for Use with Gas ottles Typical oth Ends G epth Gas Threaded F ia. olt ircle Flange Fluid - (oth Ends) Gas ccumulator Volume Volume SPP/G SE E F G Weight Model No. (Liters) (cu in) (Liters) (mm) (mm) (in) Flange (mm) (mm) (mm) (Kg) 7K05782KMLML K11552KMLML " Metric 103 7K17332KMLML ode 61 M K23102KMLML ± Flange 154 7K34652KMLML K23102KMLML K34652KMLML " Metric 344 9K46202KMLML ode 61 M K34652KMLML ± Flange 419 9K46202KMLML K57752KMNMN " Metric 12K69302KMNMN M ode K92402KMNMN ± (6X) 816 Flange 12K115502KMNMN ar Metric uxiliary Gas ottles G epth High Pressure MS Threaded F ia. olt ircle Flange Model No. Gas Volume - Gas Nominal ctual SPP/G SE E F G Weight ottle (gal) (liters) (mm) (mm) (mm) (in) Flange (mm) (mm) (mm) (Kg) 7K05782K 2-1/2 Gal K11552K 5 Gal " Metric 99 7K17332K 7-1/2 Gal ode 61 M K23102K 10 Gal ± Flange 150 7K34652K 15 Gal K23102K 10 Gal K34652K 15 Gal " Metric 322 9K46202K 20 Gal ode 61 M K57752K 25 Gal ± Flange 469 9K69302K 30 Gal K57752K 25 Gal " Metric 12K69302K 30 Gal M ode K92402K 40 Gal. 160 ± (6X) 775 Flange 12K115502K 50 Gal Parker Hannifin orporation ccumulator ivision Rockford, Illinois US
11 Models, apacities and imensions Series 3000 Non-SME 3000 PSI Non-SME for Oil and Water Service SME certification is a requirement of strength and material traceability (see page 4). Many states require SME certification, but not all. It is the function of the system designer to specify whether SME is or is not required. We now offer true non-sme accumulators in 7 and 8 bore sizes which carry a full 4:1 design factor and utilize industry standard materials. When SME certification is not required, specifying these accumulators can result in significant savings. Local rules and regulations should be followed. However, the accumulators listed on these two pages can be used with confidence when SME certification is not required. G epth High Pressure MS Threaded F ia. olt ircle Flange Model No. 1 Fluid - Gas Oil Volume Volume S Tube E F G Weight Service (gal) (cu in) (cu in) (in) (in) (in) No. Size (in) Size (in) (in) (in) (lbs) 7N05783KPL 2½ ½ N11553KPL N17333KPL 7½ or / N23103KPL ± ode N34653KPL Flange (PL) N57753KPL N05783KPL 2½ ½ N11553KPL N17333KPL 7½ or / N23103KPL ± ode N34653KPL Flange (PL) N57753KPL Notes: 1) For Water Service add W after construction code, see How to Order information. 2) Most SE #32 fittings are rated for 2000 PSI. If 2000 to 3000 PSI service is required, two options are available; order accumulator with optional standard 2" SE ode 61 4-bolt flange port by specifying PL code when ordering or order the accumulator with a SE #24 port or smaller, see Options for dimensions and How to Order. 3) See Options for complete listing of optional ports. 4) SME ertified and E marked accumulators and gas bottles are available. 5) When accumulators are to be used with gas bottles, order ccumulators for Use with Gas ottles. 6) Poppet type (MS ) gas valve standard. 32 Parker Hannifin orporation ccumulator ivision Rockford, Illinois US
12 Models, apacities and imensions Series 3000 Non-SME 3000 PSI Non-SME ccumulators for Use with Gas ottles Typical oth Ends G epth Gas Threaded F ia. olt ircle Flange Fluid Gas ccumulator Volume Volume E F G Weight Model No. (gal) (cu in) (cu in) (in) (in) (oth Ends)(in) (in) (in) (lbs) 7N05783KPLPL 2½ N11553KPLPL " ode 61 Flange (PL) N17333KPLPL 7½ or 5/ N23103KPLPL ± #32 SE Straight Thread 340 7N34653KPLPL N57753KPLPL N05783KPLPL 2½ N11553KPLPL " ode 61 Flange (PL) N17333KPLPL 7½ or 5/ N23103KPLPL ± #32 SE Straight Thread 374 8N34653KPLPL N57753KPLPL PSI Non-SME uxiliary Gas ottles G epth High Pressure MS Threaded F ia. olt ircle Flange Model No. Gas Volume Gas Nominal ctual E F G Weight ottle (gal) (cu in) (in) (in) (in) (in) (in) (in) (lbs) 7N05783K(PL) 2½ N11553K(PL) " ode 61 Flange (PL) N17333K(PL) 7½ or 5/ N23103K(PL) ± #32 SE Straight Thread 331 7N34653K(PL) N57753K(PL) N05783K(PL) 2½ N11553K(PL) " ode 61 Flange (PL) N17333K(PL) 7½ or 5/ N23103K(PL) ± #32 SE Straight Thread 363 8N34653K(PL) N57753K(PL) Parker Hannifin orporation ccumulator ivision Rockford, Illinois US
13 Models, apacities and imensions Series 2000 PSI PSI for Oil and Water Service The aluminum die casting industry has been the primary user of our 2000 PSI accumulators. We offer a 2000 PSI accumulator in 12 bore size and a variety of capacities for industries where lower pressure ratings can be used. G epth High Pressure MS Threaded F ia. olt ircle Flange Model No. 1 Fluid - Gas Oil Volume Volume S Tube E F G Weight Service (gal) (cu in) (cu in) (in) (in) (in) No. Size (in) Size (in) (in) (in) (lbs) 12K4620K1K K5775K1K " SE Flange K6930K1K s (ode 61) 7/ K9240K1K ± See Options (6X) K11550K1K for imensions 1918 Notes: 1) For Water Service add W after construction code, see How to Order information. 2) Most SE #32 fittings are rated for 2000 PSI. If 2000 to 3000 PSI service is required, two options are available; order accumulator with optional standard 2" SE ode 61 4-bolt flange port by specifying PL code when ordering or order the accumulator with a SE #24 port or smaller, see Options for dimensions and How to Order. 3) See Options for complete listing of optional ports. 4) SME ertified and E marked accumulators and gas bottles are available. 5) When accumulators are to be used with gas bottles, order ccumulators for Use with Gas ottles. 6) Poppet type (MS ) gas valve standard. 34 Parker Hannifin orporation ccumulator ivision Rockford, Illinois US
14 Models, apacities and imensions Series 2000 PSI PSI ccumulators for Use with Gas ottles Typical oth Ends G epth Threaded F ia. olt ircle Flange Fluid Gas ccumulator Volume Volume E F G Weight Model No. (gal) (cu in) (cu in) (in) (in) (oth Ends)(in) (in) (in) (lbs) 12K4620K3KPNPN " SE Flange 12K5775K3KPNPN s (ode 61) K6930K3KPNPN /8-9 See Options (6X) 12K9240K3KPNPN ± for imensions K11550K3KPNPN PSI uxiliary Gas ottles G epth High Pressure MS Threaded F ia. olt ircle Flange Model No. Gas Volume Gas Nominal ctual E F G Weight ottle (gal) (cu in) (in) (in) (in) (in) (in) (in) (lbs) 12K4620K1K " SE Flange K5775K1K s (ode 61) /8-9 12K6930K1K See Options (6X) 12K9240K1K ± for imensions K11550K1K Parker Hannifin orporation ccumulator ivision Rockford, Illinois US
15 Options Series 3000 Water Service Option (W) Piston accumulators are available for use with water as the fluid media. Modifications include electroless nickel plating all surfaces and metal parts. onsult factory for details. Seals **Recommended Maximum Seal Operating Temperature with General pplication ode Polymer Temperature Range Reduced Life and ompatibility* K una- -20 F to 165 F 200 F Parker's Standard ompound ompatible Nitrile -29 to with most mineral oil-based fluids E Fluorocarbon -10 F to 250 F 400 F ompatible with most mineral oil-based fluids at Elastomer -23 to higher temperatures and some exotic fluids Ethylene -40 F to 250 F 300 F ompatible with most phosphate ester fluids Propylene -40 to and some synthetic fluids H Hydrogenated -45 F to 325 F 350 F ompatible with most oil-based and biodegradable fluids, Nitrile -43 to maintains sealing effectiveness at a wide range of temperatures Q Low Temp. -45 F to 160 F 200 F ompatible with most mineral oil-based fluids and Nitrile -43 to maintains sealing effectiveness at low temperatures *Note: onsult local distributor or factory for fluid compatibility information. ** The temperatures listed indicate the operating temperature range of the seals, not the accumulator. For the Minimum esign Metal Temperature (MMT) of SME certified accumulators, refer to page 28. Option (M) The military style (MS) gas valve is available on 2" thru 6" bores as an option (M). Specify when ordering. 1/2 20 UNF-2 Safety Fuse Options (F) Safety Fuses are used as a safety device on accumulators and gas bottles to prevent over-pressurization of gas due to external heat or hydraulic pressure (set at 140% of maximum system pressure to avoid rupture disk fatigue and premature failure). The rupture disks are calibrated to rupture at a predetermined pressure. Safety fuses are available on most sizes of piston and bladder accumulators and gas bottles. Safety fuses can be installed on all piston accumulators by using the Fuse dapter as shown to the right. 4" bore units and above can be equipped with a fuse port machined in the gas cap by specifying the Safety Fuse Option (F) at the time of order in the model code, see How to Order. The safety fuse assembly and/or fuse adapter must be ordered separately Fuse #8 SE 3/4-16 UNF #8 SE Straight Th d #5 SE Straight Th d escription Part Number Safety Fuse ssembly xxxx Replacement Rupture isks xxxx Fuse dapter ) ssembly includes housing and rupture disk, xxxx = pressure setting in 100 psi increments, i.e., for an assembly with a 2000 PSI setting, order P/N Fuse dapter #5 SE Straight Th d 36 Parker Hannifin orporation ccumulator ivision Rockford, Illinois US
16 Options Series 3000 Optional s The following ports are available as options on all Series 3000 piston accumulators SE Straight Thd. ode 61 Flange NPT SPP ISO Min. ode Min. Min. Min. Min. Size ode ore Size Inch Metric ore Size ode ore Size ode ore Size ode ore #5 T 2" 1/2" PT MT 3" 3/8" UT 2" 3/8" R 2" M14 Y 2" #6 T 2" 3/4" PU MU 3" 1/2" UU 2" 1/2" R 2" M18 Y 2" #8 T 2" 1" PV MV 3" 3/4" UV 2" 3/4" R 2" M22 Y 2" #10 TI 2" 1¼" PW MW 3" 1" UW 3" 1" R 3" M27 Y 2" #12 T 2" 1½" PJ MJ 4" 1¼" UX 3" 1¼" RE 3" M33 YE 3" #16 TE 3" 2" PL ML 6" 1½" UY 4" 1½" RF 4" M42 YF 3" #20 TF 3" 2½" PM MM 6" 2" UZ 4" 2" RG 4" #24 TG 4" 3" PN MN 7" Note: 1) 3000 PSI SE ode 61 (ISO 6162) Flange dimensions are shown below. 2) SPT and Metric ports available, consult factory. SE 4-olt Flange imensions Standard Pressure 3000 PSI (207 ar) Flange Size SE ode 61 Flange imensions (in.) in F G 1½" 1/ ½ " 1/ ½" 1/ ½ " 5/ Note: Some flanges using this bolt pattern are not rated for 3000 PSI. Flange Size Metric ISO6162 Flange imensions (mm) mm F G 38 M M M M Note: Some flanges using this bolt pattern are not rated for 3000 PSI. F (4 places) x G Min. epth dapters wide variety of port adapters are offered for those that wish to convert Parker s standard SE port offerings to NPTF or smaller SE port sizes. For a complete listing, see ccumulator ccessories. 37 Parker Hannifin orporation ccumulator ivision Rockford, Illinois US
17 Parts and ccessories Series 3000 Seal Kits Seal Kits are available for all piston accumulator models. When ordering seal kits, please supply the complete model and serial numbers from the name plate and specify fluid type and operating temperature. Parts List 1 ody 2 ap 3 Gas ap 4 Piston 5 V-O-ring Piston Seal 5 V-O-ring ackups 6 PTFE Glide Rings 7 O-ring 7 O-ring ackup 8 8 O-ring 9 Guard 9 Screw 3000 PSI Seal Kit Numbers (Includes items 5, 5, 6, 7, 7, 8) Material ore Size 2" 3" 4" 6" una-nitrile (Std.) RK0200K000 RK0300K000 RK0400K000 RK0600K000 RK0700K000 RK0900K000 RK1200K000 Fluorocarbon RK0200E000 RK0300E000 RK0400E000 RK0600E000 RK0700E000 RK0900E000 RK1200E000 EPR RK RK RK RK RK RK F* Hydrogenated Nitrile RK0200H000 RK0300H000 RK0400H000 RK0600H000 RK0700H000 F* F* Low Temp Nitrile RK0200Q000 RK0300Q000 RK0400Q000 RK0600Q000 RK0700Q000 RK0900Q000 F* *F = onsult Factory Mounting, harging & Gauging ccessories Parker offers a wide variety of mounting, charging and gauging accessories. See ccumulator ccessories. Special Options If your application requires a piston accumulator, gas bottle, or special option that falls outside of Parker s broad offering, consult your local distributor, Parker representative, or the factory with your specific requirements. Parker has the manufacturing and engineering expertise to design and build piston accumulators to your exacting requirements, from simple modifications of standard units to complete designs. Some example of Parker s past special designs include: Special and Stainless Steel Materials Piston Position and Velocity Sensors and Switches Special Seals Non-Standard apacities Tie Rod onstruction Special ertifications Spring & Weight Loaded onsult the experts at Parker with your next piston accumulator requirement! 38 Parker Hannifin orporation ccumulator ivision Rockford, Illinois US
18 Ordering Information Series 3000 How to Order Piston accumulators and gas bottles can be specified by using the symbols in the chart below to develop a model number. Select only those symbols that represent the features desired, and place them in the sequence indicated by the example at the top of the chart. Nominal ore Type of esign esign Seal Hyd. Gas Series Size onstruction Options apacity Pressure Number ompound Modification Modification 7 K K Series ccumulator Gas ottle Nominal ore Size 2 2 inches 3 3 inches 4 4 inches 6 6 inches 7 7 inches 8 8 inches 9 9 inches inches N K L E Type of onstruction Threaded both ends non-sme mat l standard on 2", 4", 6", 7" & 8" (3000 PSI fatigue design tested) Threaded both ends.s.m.e. mat l standard on 7 & up Same as K with.s.m.e. approval stamp 7 & up. vailable as special on smaller sizes Threaded both ends, E marked (1 liter and above) or SEP marked (under 1 liter) Options lank Standard Gas ap W Water Service F SE Fuse * G SE Fuse *, Water Service M MS L MS , Water Service P Fuse* and MS R Fuse* and MS , Water Service * Safety fuse assembly not included. Order fuse assembly separately. ore Size/apacity cu. in. (0.08 liters) cu. in. (0.16 liters) cu. in. (0.48 liters) cu. in. (0.95 liters) cu. in. (0.48 liters) cu. in. (0.95 liters) cu. in. (1.47 liters) cu. in. (1.90 liters) cu. in. (3.00 liters) cu. in. (0.95 liters) cu. in. (1.90 liters) gal. (3.79 liters) ½ gal. (5.69 liters) ½ gal. (9.47 liters) gal. (3.79 liters) ½ gal. (5.69 liters) ½ gal. (9.47 liters) gal. (15.1 liters) gal. (18.9 liters) ½ gal. (28.4 liters) gal. (37.9 liters) ½ gal. (9.47 liters) gal. (18.9 liters) ½ gal. (28.4 liters) gal. (37.9 liters) gal. (56.8 liters) gal. (94.6 liters) ½ gal. (9.47 liters) gal. (18.9 liters) ½ gal. (28.4 liters) gal. (37.9 liters) gal. (56.8 liters) gal. (94.6 liters) gal. (37.9 liters) gal. (56.8 liters) gal. (75.7 liters) gal. (94.6 liters) gal. (113.6 liters) gal. (94.6 liters) gal. (114 liters) gal. (151 liters) gal. (189 liters) onsult factory for other available sizes. esign Pressure 3000 PSI (ll ore Sizes) K 2000 PSI (12" ore only) X Other For E Marked Only L 250 ar (ll ore Sizes) H 350 ar (See page 63) esign Number 1 Standard 2 Metric Mounting Holes & Hyd. (SPP Standard) Specify Optional s 3 Optional (Hyd. or Gas, See Table) *** Special esign and Gas Modifications esignated by 2 igits 1st 2nd Min. igit Style igit escription ore Size lank Std. lank Std. T SE SE #5 (1/2-20) 2 Straight SE #6 (9/16-18) 2 Thread SE #8 (3/4-16) 2 s SE #12 (1 1/16-12) 2 E SE #16 (1 5/16-12) 3 F SE #20 (1 5/8-12) 3 G SE #24 (1 7/8-12) 4 H SE #32 (2 1/2-12) 7 I SE #10 (7/8-14) 2 Min. ore P Flange J 1 1/2 4 (ode 61) L 2 6 M 2 1/2 6 M Metric N 3 7 Flange T 1/2 3 per U 3/4 3 ISO 6162 V 1 3 W 1 1/4 3 T 3/8 2 U NPTF U 1/2 2 (Not V 3/4 2 Recommended) W 1 2 X 1 1/4 2 Y 1 1/2 4 Z 2 4 SPP/SPT Metric/ISO R SPP 3/8-19 M14 x 1.5 Parallel 1/2-14 M18 x 1.5 SPT 3/4-14 M22 x 1.5 Taper 1-11 M27 x 2 G Metric E 1 1/4-11 E M33 x 2 Y ISO F 1 1/2-11 F M42 x G 2-11 G M48 x 2 Example of Optional ccumulator 4 N K T U V Non-std. Standard s vailable (See Modifications Table if Using Other Than Standard s Shown elow) ore Standard Metric Size Sizes Sizes 2 SE #12 3/4 3 SE #12 3/4 4 SE # SE # SE #32 ISO SE #32 ISO SE #32 ISO SE Flange ISO 6162 ode 61 SE #8 Hyd. Seal ompound (See atalog for Temperature Settings) K una-nitrile (Std) E Fluoroelastomer EPR H Hydrogenated Nitrile Q S NPT 3/4 Gas Low Temp. Special (to be specified) 39 Parker Hannifin orporation ccumulator ivision Rockford, Illinois US
Piston Accumulators Series Catalog HY /US Page
Page Series 5000 Series 5000 Piston ccumulators Heavy uty Service with 5000 PSI Operating Pressure 2" thru 9" ores with Over 30 Standard apacities Patented V-O-ring Piston Seals Serviceable Threaded End
More informationPiston Accumulators Series Catalog /USA Page
atalog 1630-7/US Page Piston ccumulators Series 5000 Series 5000 Piston ccumulators Heavy uty Service with 5000 PSI Operating Pressure 2" thru 9" ores with Over 30 Standard apacities Patented V-O-ring
More informationBladder Accumulators za03 Bottom Repairable Top Repairable Medium Flow High Flow Transfer Barrier Gas Bottle
LADDER PRODUCTS za03 ottom Repairable Top Repairable Medium Flow High Flow Transfer arrier Gas ottle Features: Operating Pressures to 6600 PSI Ten Different Capacities from 10 cu in to 15 gallons Nine
More informationA Series Piston Accumulators. 0.5 to 300 Litres, 250 and 350 bar
Series Piston ccumulators 0.5 to 300 Litres, 250 and 350 bar Description Piston ccumulators up to 80 Litres volume, 200 ore, 250 ar & 350 ar.parker series piston accumulators offer quality design and premium
More informationPiston Accumulators. Threaded Piston Accumulators ACP Crimped Piston Gas Bottles Metric Accumulators & Bottles. Piston Accumulators.
Overview Introduction Threaded ACP Crimped Piston Gas ottles Metric Accumulators & ottles Piston 5000 4000 3000 3000 2000 IN THIS SECTION Series 2000 & 3000 29 ACP 37 Series 4000 & 5000 43 Features: Heavy
More informationBladder Accumulators. Bladder Accumulators Introduction. Bladder IN THIS SECTION. Features. Models, Capacities & Dimensions. 10 cu in to 15 gallons
Overview ntroduction N TS SECTON Overview 51 Specifications 52, Capacities & Dimensions Bottom Repairable 54 Top Repairable 55 igh-flow 56 Transfer Barrier 57 Bottles 58 Options & Accessories 59 Replacement
More informationPiston Seal OE Profile
Seal, PTFE ap Seal atalog EPS 530/US The Parker OE profile is a bi-directional piston seal for use in low to medium duty hydraulic applications. The OE profile is a two piece design comprised of a standard
More informationPiston Seal CQ Profile
Q Profile Q Profile, Premium PTFE ap with nti-rift Technology atalog EPS 530/US The Parker Q profile is a bi-directional piston seal for use in medium to heavy duty hydraulic applications. The Q profile
More informationDiaphragm Accumulators AD Series
Parker Diaphragm Accumulators Feature: Operating Pressures to 250 Bar Capacities from.075 to 2.80 Liters Compact and Lightweight Low Cost, Non-Repairable Design Nitrile & Hydrin Diaphragms Durable Metric
More informationA Series Piston Accumulators 250 & 350 bar accumulators with fluid volumes from 0.1 litres to 76 litres
Piston Accumulators & 350 bar accumulators with fluid volumes from 0. litres to 76 litres Catalogue HY07-240/UK October 2004 Catalogue HY07-240/UK Introduction Contents Page Accumulator Selection 2 Certification
More informationInline Pulse-Tone. Hydraulic Shock Suppressors. Inline Pulse-Tone Shock Suppressors Feature:
Shock Suppressors Feature: Three Bladder Polymers for a Wide Range of Fluids and Temperatures NPT, BSPP, SAE or Split Flange Connections Mounting in Any Position 3000 PSI Models for Water/Chemical Service
More informationTable of Contents. Quick Coupling Products
Quick oupling Products Table of ontents Table Of ontents...1 Fluid Quick ouplings...3 oupling Selection uide...4 Non-Spill ouplings...5 FS Series...5 ouplers...6 Nipples...7 FS Series ust aps & Plugs...8
More informationEHP Series Piston Accumulators. 0.1 to 1000 Litres, up to 350 bar (as standard)
EHP Series Piston ccumulators 0.1 to 1000 Litres, up to 350 bar (as standard) Description The EHP piston accumulators are manufactured in arbon & Stainless Steel and are available with a wide range of
More information7" & 8" Bore High Pressure zhc03 Hydraulic Cylinders Series 3H
7" & " ore High Pressure zhc0 Hydraulic ylinders Series H Heavy Duty Service Industrial Tie-od onstruction Nominal Pressure 000 PSI Fifteen Standard Mounting Styles For ylinder Division Plant Locations
More informationHousings and Miscellaneous Parts
Housings and Miscellaneous Parts Standard and Special Valve Housings, Orifice Disks, Orifice Sizing harts, Pilot Pistons, dapters, djustment Kits and Seal Kits ETON Vickers Screw-in artridge Valves V-VLOV-M001-E1
More informationHusky 1050 Plastic Pumps Air-Operated Double Diaphragm
PRT NO. ONFIGURTION NO. SERIL NO. TE OE SERIES MX WPR PSI-bar ME IN Husky 15 Plastic Pumps ir-operated ouble iaphragm Husky 15 Selector Tool To order a Husky 15, use the online selector tool at www.graco.com/process
More informationOil and Gas - O&G Series Bladder Accumulators
Oil and Gas - O&G Series ladder ccumulators High Pressure, 07 to 760 bar Catalogue HY0-4004/UK rev. 0 escription esigned for high pressure hydraulic systems, the O&G bladder accumulator has been developed
More informationPiston Accumulators. SK Series 28 INNOVATIVE FLUID POWER. Piston Accumulators. Piston Types. Description. Construction.
SK Series Piston Accumulators Piston Types TYPE 2 Without heck Valves Application (without heck Valve) Low-friction design for higher piston speeds, slow movements without stick-slip effect and high number
More informationLOW PRESSURE FILTERS RF Series In-tank / Inline Filters 360 psi up to 400 gpm
LOW PRESSURE FILTERS RF Series In-tank / Inline Filters 36 psi up to 4 gpm Hydraulic Symbol A D2 Features RF 3 filters are constructed of polyamide plastic. RF 6-33 filters are constructed of aluminum
More informationQuick oupling Products Introduction The Parker Hannifin offers a full range of precision quick action couplings for use in the process, power and inst
Instrumentation Quick ouplings 1 Parker Hannifin orporation Quick oupling Products Introduction The Parker Hannifin offers a full range of precision quick action couplings for use in the process, power
More informationLow Pressure Filters
MF, MFD, MFDS Series Spin-On Filters 250 PSI up to 120 GPM Hydraulic Symbol /80/85/160/180 MF 90/95/190/195 A A B B Features MF Filters are manufactured with an aluminum head. Choice of NPT, SAE straight
More informationLOW PRESSURE FILTERS MF, MFD, MFDS Series Spin-On Filters 250 PSI up to 120 GPM
LOW PRESSURE FILTERS MF, MFD, MFDS Series Spin-On Filters 250 PSI up to 120 GPM Hydraulic Symbol MF 80/85/160/180 MF 90/95/190/195 A A (Standard) (Suction) B B Features MF Filters are manufactured with
More informationSliding Seal & Brass Poppet Valves
Sliding Seal & rass Poppet Valves anually Operated Section PL / VL Series... 2-3 HV Valve... 4-5 Hand Operated Valves,... 6-7 utton Operated Valves...8 Hand / Cam utton Valves...9 leed Valve...10 old text
More informationSeries VH Hydraulic Cylinders
Series H Series H very heavy-duty hydraulic cylinders are premium quality cylinders with operating capacities of,000 PSI. They fully meet NPA standards. And to make sure every cylinder is premium-quality,
More informationLOW PRESSURE FILTERS MF, MFD, MFDS Series Spin-On Filters 250 PSI up to 120 GPM
MF, MFD, MFDS Series Spin-On Filters 250 PSI up to 120 GPM Hydraulic Symbol MF 80/85/160/180 MF 90/95/190/195 A A (Standard) (Suction) B B Features MF Filters are manufactured with an aluminum head. Choice
More informationMEDIUM PRESSURE FILTERS
Medium Pressure Filters 61-2999 psi Low-cost aluminum construction inline filters, provide flexibility for use in both mobile and industrial applications. Durable and light weight, these filters are ideal
More informationThermoplastic Couplings
Thermoplastic ouplings Thermoplastics -1 Quick oupling Division Thermoplastic ouplings Table of ontents Thermoplastics oupling Selection Guide...-3 Spectrum Series...-4 Specifications...-4 ouplers...-5
More informationUT SERIES PNEUMATIC ROTARY ACTUATORS
UT SERIES PNEUMATIC ROTARY ACTUATORS Toll Free 1.888.842.9998 Fax 1.866.842.3144 6 FEATURES COMPACT DESIGN The MAX-AIR rack & pinion pneumatic actuator produces linear torque output in a compact design
More informationatalog /US Index Vacuum ups Product Selection Technical Lifting orces, up iameters, Material Specifications 6-9 P lat Precision molded single li
Vacuum ups Section 3 Parker annifin orporation ivision atalog 0802-2/US Index Vacuum ups Product Selection Technical Lifting orces, up iameters, Material Specifications 6-9 P lat Precision molded single
More informationD I S T R I B U T E D V A L V E S. NAVCO Series E Resilient Seat Butterfly Valve NAVCO
NVCO Series E Resilient Seat utterfly Valve NVCO SERIES E RESILIENT SET UTTERFLY VLVE Features vailable in sizes 2 in. - 24 in. (50 mm - 600 mm) 200 psi 2 in. - 12 in. (50 mm - 300 mm) 150 psi 14 in. -
More informationAccumulator. The pressure is always on.
ccumulator The pressure is always on. www.tobul.com Table of Contents Piston ccumulators 7 Econolator 8 3,000 PSI Series 9 5,000 PSI Series 12 10,000 PSI Series 14 Greater than 10,000 PSI MWP pplications
More informationA c c u m u l at o r. The pressure is always on.
c c u m u l at o r The pressure is always on. www.tobul.com Table of Contents Piston ccumulators 7 Econolator 8 3,000 PSI Series 9 5,000 PSI Series 12 10,000 PSI Series 14 Greater than 10,000 PSI MWP
More informationMODEL NUMBERS UPDATED. Accumulator. The pressure is always on.
NUMERS UPDTED ccumulator The pressure is always on. www.tobul.com Table of Contents Piston ccumulators 7 EconoLator 8 3,000 PSI Series 9 5,000 PSI Series 12 10,000 PSI Series 14 Greater than 10,000 PSI
More informationF20 & F21 QIX Particulate & Coalescing Filters
F2, F21 Series QIX Filters 1/4, 3/8, 1/2, 3/4 & 1 Inch Ports F2 & F21 QIX Particulate & oalescing Filters Manual rain utomatic rain Unique Interchangeable QIX Inserts llow One Module to ccommodate Port
More informationHIGH PRESSURE FILTERS DFFX Series Reverse Flow Differential Pressure Optimized Filters 6090 psi up to 160 gpm
HIGH PRESSURE FILTERS DFFX Series Reverse Flow Differential Pressure Optimized Filters 6090 psi up to 160 gpm Hydraulic Symbol or DFFX FILTER REVERSE FLOW CIRCUIT P Indicator Reverse Flow Valve BY-PASS
More informationMax. Oper. Pressure Kgf/cm 2. Min. Oper. Pressure. Design. Design Standard. Number
ccumulators ccumulators are mainly used to store pressure fluid and these are used as a hydraulic damper. lthough various types of accumulators are developed today, proper selection should be made for
More informationSV73 Cast Iron Safety Valve
Page 1 of 5 TI-S13-25 H Issue 11 ert. No. LRQ 0963008 ISO 9001 SV73 ast Iron Safety Valve Description The SV73 cast iron series valves are built in conformance to Section I and VIII of the SME oiler and
More information1 Cylinder. 1 - Cylinder Type 3 - Cylinder Capacity 4 - Cylinder Stroke. 2 - Cylinder Options. Cylinder Accessories
1 Type 30 06 T 2 3 4 5 apacity Stroke Options ode 1 - Type 3 - apacity 4 - Stroke ydraulic 2 - Options L LN LN P P T U U U ULN S/ - ollow ole / - eneral Purpose / - ollow ole / - igh Tonnage S/ - lat ody
More informationBV3H & BV4H True Multi-Way
6, PSI trunnion type with stock L/T/X ball patterns Supports high port-to-port ΔP ~ s from ¼" to " all DMI for pricing & availability if you require higher pressure or larger multi-way valves. DMI V3H
More informationVickers. Service Data. Vane Pumps. Vane Type Triple Pump (F3) 2520VQSV10* ***** ******* 20* M 2492 S. Released
Service ata Vickers Vane Pumps Vane Type Triple Pump (F3) 2520VQSV10* ***** ******* 20* Released 08 01 95 M 2492 S 10 SE rated capacity (V10 cover end cartridge) USgpm Rotor Vane Kit Ring Pin Pin olt olt
More informationVickers. Service Data. Vane Pumps. Vane Type Triple Pump (F3) 4525VQSV10* ***** ******* 20* Released M 2496 S
Service ata Vickers Vane Pumps Vane Type Triple Pump (F3) 4525VQSV10* ***** ******* 20* Released 08 01 95 M 2496 S 10 SE rated capacity (V10 cover end cartridge) USgpm Rotor Vane Kit Ring Pin Pin olt olt
More informationMT SERIES PNEUMATIC ROTARY ACTUATORS
MT SERIES PNEUMATIC ROTARY ACTUATORS Toll Free 1.888.842.9998 Fax 1.866.842.3144 6 FEATURES COMPACT DESIGN The MAX-AIR rack & pinion pneumatic actuator produces linear torque output in a compact design
More informationFlow Control Valves. Overview. Accessories Catalog. Needle Valves. Flow Control Valves. Pressure Compensated Flow Control Valves.
Overview Needle Valves DV, DVE & DVP Series (see page ) Flow Control Valves DRV & DRVP Series (see page ) Pressure Compensated Flow Control Valves SRVR Series (see page ) Check Valves RV & RVP Series (see
More informationPneumatics Pneumatic Quick ouplings Single Shut-Off ouplings Single Shut-Off couplings are primarily used for pneumatic applications, connecting air t
Pneumatic Quick ouplings Pneumatics -1 Quick oupling ivision Pneumatics Pneumatic Quick ouplings Single Shut-Off ouplings Single Shut-Off couplings are primarily used for pneumatic applications, connecting
More informationquick couplings HQC Series Instrumentation Quick Couplings Typical Applications Features & Benefits Technical Data
HQ Series Instrumentation Quick ouplings Typical pplications Laboratories University labs Gas distribution iopharmaceutical Technical Data ONSTRUTION 36 Stainless steel* NOMINL FLOW SIZES /4, 3/8, / MXIMUM
More informationProcess Equipment Catalog Pumping Solutions for Process Industries
Process Equipment atalog Pumping Solutions for Process Industries Table of ontents Process Equipment uyer s Guide ontents New Products... 2 Pump Model Overviews... 3 Pump Selection Key for ODD Pumps...
More informationVacuum Cups. Styles. Cup material Nitrile Silicon Urethane Material code NBR SI U Operating temperature ( C) -60 to ±5 55 ±5 55 ±5
atalog PN1000-2US Vacuum ups P ellows Vacuum ups These s are for curved, corrugated, lightly textured surfaces and flexible product. Under vacuum, the bellow will collapse on contact and lift the product
More informationNFH Low Pressure Filters
PPLICTIONS NFH Low Pressure Filters Pressures to 360 psi Flows to 450 gpm Water Removal Capability 4 Ports HYDC NFH In-line Return Filters are designed for use on hydraulic power units, machine tools,
More informationPNEUMATIC RACK AND PINION ACTUATORS. Advanced torque to size ratio
PNUMTI RK N PINION TUTORS dvanced torque to size ratio eatures: Pneumatic Rack and Pinion ctuators 90 ctuation for -way valves (Straight & ngle) 180 ctuation for -way (T-type) valves ctuators comply with
More informationFLOW CONTROL VALVES A5-1 PN# / / ACC
FLOW CONTROL VLVES Flow Control Valves The HYDC family of flow control valves permit safe, simple and repeatable control of hydraulic fluids at operating pressures to psi. The standard slotted control
More informationCable & Wire Management
able & ire Management able & ire Management Lay-In ireway Type 1 Screw over... 8-14 Lay-In ireway Type 1 Quick-onnect inge over... 15-20 Lay-In ireway Type 3R EnviroShield... 21-24 Lay-In ireway Type 12...
More informationPressure Control Valves. General Description. Specifications. Ordering Information
Catalog HY14-3000/US Technical Information Control Valves Series RCP General escription Series RCP in-line pressure control valves are chiefly used as remote control valves. They limit system pressure
More informationHIGH PRESSURE FILTERS DF/DFF 1500 Series Inline Filters 6090 psi up to 250 gpm
HIGH PRESSURE FILTERS DF/DFF 1500 Series Inline Filters 6090 psi up to 250 gpm Hydraulic Symbol DFF FILTER REVERSE FLOW CIRCUIT Bypass Valve Filter Element Pop-up Indicator Features Available in T ported
More informationMedium Duty Hydraulic Cylinders Series 3L
Medium Duty Hydraulic ylinders Series L Medium Duty Service Industrial Tie od onstruction Nominal Pressure 000 PSI Depending on ore Size Standard ore Sizes " through " Piston od Diameters /" through -/"
More informationGold Cup Hydrostatic Transmission
Gold Cup Hydrostatic Transmission The Gold Cup Hydrostatic Transmission pumps are variable displacement piston pumps of an unparalleled rugged design. Rated to 5000 PSI continuous pressure and continuous
More informationColorflow and Ball Valves. Industrial Flow Control, Check, Gauge Control. Catalog HY /US
Colorflow and Industrial Flow Control, Check, Gauge Control Catalog HY14-3300/US Colorflow and Fully guided poppets are used on Colorflow valves rather than the less durable ball-check type construction.
More informationS10/S20 Installation Instructions
ISO 400:996 and ISO 900:000 ERTIFIE MEHNIL SEL INSTLLTION INSTRUTIONS S0/S0 Installation Instructions PREPRTION 00.005" 0,3 mm 3 4 3 µ" 0,8 µm R a 000 ±.00" 0,05mm UTIONS These instructions are general
More informationDuplex Pressure Filters
Duplex Pressure Filters Series DFDK Ball Valve Selector Pressures to 45 psi Flows to 9 gpm APPLICATIONS HYDAC DFDK Duplex Filters are ideal for use on hydraulic test equipment, robots, or other critical
More informationHIGH PRESSURE FILTERS
HIGH PRESSURE FILTERS Series DF & LF Pressures to 6 PSI Flows to 18 GPM APPLICATION HYDAC DF & LF In-line High Pressure Filters are designed for use on hydraulic power units, machine tools, plastics machinery,
More informationMaximum Working Pressure. Code Description Brass
Technical Information Series 500 General escription Series 500 low pressure ball valves provide total shut-off capability for services up to 41 ar (600 PSI). Series 500 consists of PT female/female ports,
More informationFlow Controls & Accessories
Flow ontrols & ccessories Section V V Flow ontrol Valves SPF Series...2 337 Series...3 3250 Series... 4-5 Miniature Right ngle...6 3251 Series...7 FM701 & FM703 Series...8 F701, F702, FS701 Series...9
More information7" & 8" Bore zcy03 High Pressure Hydraulic Cylinders Series 3H
" & " ore zcy0 High Pressure Hydraulic s Series H Heavy Duty Service Industrial Tie-Rod onstruction Nominal Pressure 000 PSI Fifteen Standard Mounting Styles For Division Plant Locations See Page II. 65
More informationMILLCENTRIC B ALANCING PLUG VALVE
ISO 9001 ertified MILLNTI LNING PLUG VLV alancing Service egulation of multi-circuit chilled water and hot water systems is essential to achieve design performance. MILLNTI valves have excellent throttling
More informationMounting Components. Accumulator Catalog. Mounting Components. HS - Regular Duty Clamp. Function. HSS - Heavy Duty Clamp. Types. KBK - Base Bracket
Mounting omponents Mounting omponents Y mounting components are used to mount all types of hydropneumatic accumulators safely and simply, regardless of the mounting position. Our wide range includes suitable
More information,, WY VLVS Way Valves - Side ntry Product index... p. - Way Valves - ottom ntry Product index... p. Way Valves - ottom ntry Product index...p. ontents
MTRI,, WY VLVS 6P/6P SRIS ,, WY VLVS Way Valves - Side ntry Product index... p. - Way Valves - ottom ntry Product index... p. Way Valves - ottom ntry Product index...p. ontents Introduction... Page - Product
More informationModuflow. ILP and RFP Low Pressure Filters. Series
Moduflow ILP and RFP Low Pressure Filters Series 27 Applications for Moduflow Filters Power Unit Fabrication Off-line Filter Loops Mobile Equipment The Moduflow filter is widely considered the most versatile
More informationHydraulic. Quick Couplings
Hydraulic Quick ouplings -1 Introduction ouble Shut-Off and Straight-Thru ouplings Parker hydraulic couplings have a wide variety of designs, each tailored to a particular application or use. This catalog
More informationPneumatic rotary drive
Pneumatic rotary drive Modular program for mounting of quarter turn valves such as ball valves and butterfly valves NMUR and ISO 5211 interfaces Position feedback (including Ex-Versions) Type 2051 can
More informationLow shear, low pulsation performance delivers superior finish quality
TRITON 3:1 irculating Pumps TRITON 13HP 23375 & 233751 TRITON 38HP 23385 & 233816 Low shear, low pulsation performance delivers superior finish quality FETURES ND ENEFITS Low pulsation output provides
More informationFlow Controls & Accessories
Flow ontrols & ccessories Section Flow ontrol Valves SPF Series...2 337 Series...3 3250 Series... 4-5 Right ngle Series... 6-9 Needle Valves SPN Series...10 338 Series...11 SP Series heck Valve...12 339
More informationHousings and miscellaneous parts
Hydraulic Screw-in artridge Valves (SiV) Housings and miscellaneous parts Standard and special valve housings, orifice disks, orifice sizing charts, pilot pistons, adapters, adjustment kits and seal kits
More informationIndustrial Lifting Equipment
Industrial Lifting quipment Trolley and Tractor Selection Guide 1/2 20 metric ton Lifting apacity Ingersoll-Rand offers a wide variety of plain, geared or powered trolleys for use with the MLK and HLK
More informationModulating Water Valves and Bulb Wells
Modulating Water Valves and ulb Wells PPLITION: These modulating valves regulate the flow of water to the heat exchanger to maintain a desired exiting oil temperature. They open automatically when temperature
More information4-Way, 5-Port, 2 & 3-Position Solenoid and Remote Pilot 1/2" & 3/4" Ports. Technical & Service Data. Pneumatic
atalog VL-UTO-/US (Revised 6/0/0) pplication & Model Selection S utomotive Subbase Valves -Way, -ort, & -osition Solenoid and Remote ilot /" & /" orts pplication ual pressure or diverter valve operation
More informationTemperature Sensors. How to Order Consult factory for pricing and lead time. Normally Open (Closed on temperature rise)
Temperature Sensors 0916 Normally Open (losed on temperature rise) ontact Rating 6 MPS T 120 V 4 MPS T 240 V Voltage 0.1 to 240 volts or 12 VD 8 MPS, 24 VD 4 MPS Pressure 1,000 PSI operating Material 303
More informationPDE2611TCUK-ca Air Preparation. Miniature FRL series. Miniature FRL Series. Parker Hannifin Corporation Pneumatic Division - Europe
P26TUK-ca ir Preparation Miniature RL series Miniature RL Series 49 Parker Hannifin orporation Pneumatic ivision - urope P26TUK-ca ir Preparation Miniature RL series - /8", /4" asic /8" ody 4 ilters -
More informationNon-Spill Couplings zfc42 NS Series. Hydraulic Quick Couplings. B Hydraulics. Features. Applications. Note. Performance. Specifications B-20
Non-Spill ouplings zfc NS Series 8 7 pplications Non-Spill couplings by Parker are widely used in the public utility market where hydraulic oil spillage can constitute a serious safety hazard, particularly
More informationDisconnect Switch and Circuit Breaker Mechanism Specifications Bulletin Number 1494
Technical ata isconnect Switch and ircuit reaker Mechanism Specifications ulletin Number 1494 Topic Page 1494U isconnect Switch Specifications 2 1494, 1494F, 1494G, 1494R, 1494V isconnect Switch Specifications
More informationPneumatic Quick Couplings
Pneumatic Quick ouplings -1 maku GmbH & o. KG 73630 Remshalden Telefon (0 71 51) 7 26 26 Telefax (0 71 51) 7 42 01 www.maku-industrie.de Pneumatics Pneumatic Quick ouplings Single Shut-Off ouplings Single
More informationTension Brakes/Air Cooled
IST. UTORIZO Tension rakes/ir ooled MX (55) 53 63 23 31 Magnum rakes The Wichita Magnum rake sets new standards in performance, safety and serviceability. The Magnum is easy to apply and simple to service.
More informationPT Series Tank Top Filters
Tank Top Filters 9 Applications Together we can Preserve the environment. Minimize waste and promote energy efficiency. Achieve worldwide filtration solutions. Build global confidence. Redefine new limits.
More informationThermo Scientific Gilmont
Direct Reading Laboratory Flowmeters Instruments Wide selection of flow ranges measure air from 0.02 ml/min to 137 LPM or water from 0.0002 ml/min to 4.1 LPM Excellent chemical compatibility with glass
More informationHeavy Duty Hydrostatic Transmissions
Heavy Duty Hydrostatic Transmissions Features and Benefits Typical Applications Construction Transit Mixer Road Roller Paver Motor Grader Loader Dozer Material Handling & Utility Crane Sweeper Lift Truck
More informationBladder Special Orders 46 Accumulator Selection, Commissioning, Installation & Maintenance 47
Product Catalog Table of Contents Section Subject Page Contact Contacting Accumulators, Inc. Ordering Standard Part Number List 3 Accumulator Ordering Table Special Order Products 5 Product Drawings AccuMight
More informationTable of Contents. Page. See Catalog and Product Updates on our Website
2 Table of Contents Page Sapphire Orifice Assemblies... 3-5 Metal Orifice Assemblies - Barb Connections... 6-7 Metal Orifice Assemblies - NPT Connections... 8-9 Metal Orifice Assemblies - Inserts... 10-13
More informationSeries MK ø12, ø16, ø20, ø25, ø32, ø40, ø50, ø63
otary lamp ylinder/standard Series MK ø, ø, ø, ø, ø, ø, ø5, ø ow to Order MK 1 3 S otary clamp cylinder Mounting Symbol Style ore size Through hole & both ends tapped (Standard) ø, ø oth ends tapped Through
More informationLOW PRESSURE FILTERS RFM Series In-Tank Return Line Filters 145 psi up to 224 gpm
LOW PRESSURE FILTERS RFM Series In-Tank Return Line Filters 145 psi up to 4 gpm Technical Specifications Mounting Method 75/9/15/165/185 mounting holes - filter housing D5 Features The compact and lightweight
More informationMagHex Fan Controller
MagHex Fan ontroller 0916 ompact Programmable Temperature Sensor This combined sensor and controller is designed to mount directly to the heat exchanger. It provides accurate temperature control by cycling
More informationBC SERIES CHECK VALVE
SERIES HEK VLVE Soft ubble Tight 1/2 psi racking Pressure NR Standard (Viton Optional, use Suffix V) Lead Free option, use suffix LF omplies with alifornia 1953 Max Working Pressure 1/4 thru 400 psi WOG
More informationNFHD Modular Duplex Filter System Pressures to 360 psi Flows to 450 gpm 4 Ports
NFHD Modular Duplex Filter System Pressures to 360 psi Flows to 450 gpm 4 Ports PPLICTIONS HYDC NFHD Return Line Filters are designed for use on hydraulic power units, machine tools, plastics injection
More informationSuper CB Series Clutch/Brakes
Super Series lutch/rakes Long Life, High Performance esign The Super Series lutch/rakes function in the same manner as the standard Series. The major advantage of the Super Series is extraordinary long
More informationValve Products Directair Valve Series
atalog 000- arker neumatic irectair alve eries rass oppet / liding eal - eries ockout alves eatures irectair, /8" valves oppet style.7 v conomical -way normally closed function irectair, /8" valves acked
More informationVeljan Gear Pumps. 'B' Series Features:
'' Series Features: Self-priming pumps Heavy duty sleeve bushing design in a small frame size Displacements from 9.8cc/rev to 39.9cc/rev Working pressures up to bar Speeds up to rpm Flows up to 10.5gpm
More informationjamesbury Bulletin A107-1 Issue 7/2006
1-SERIES PNEUMTIC CYLINDER CTUTORS 1-Series piston actuators are available in either doubleacting or spring-return versions. The Series 1C and 1J provide for mounting in accordance with ISO 5211/1. These
More informationWorld Pressure Filters. A New Standard in 7,000 psi Pressure Filters
World Pressure Filters A New Standard in 7, psi Pressure Filters 12 WPF Series Applications Together we can the environment. Preserve Minimize waste and promote energy efficiency. worldwide Achieve filtration
More informationComplete Hydraulic Set System 100
Diagnostics System 100 Measuring-System System 100 Technical The design of the Tema System 100 allows the check of static and dynamic pressures as well as vacuum. With the integrated self-venting device
More informationHigh Performance Repairable Pneumatic Cylinder Parker Hannifin Corporation
High Performance Repairable Pneumatic Cylinder 219 Pneumatic ivision eatures Optional Piston Magnet Located under wear band, piston magnet is used for through-thebarrel sensors for electronic piston position
More informationRotary Plug Valves (PR Series) Catalog 4126-PR Revised, July 2003
Rotary Plug Valves (PR Series) Catalog 4126-PR Revised, July 2003 PR Series Rotary Plug Valves Introduction Parker PR Series Plug Valves provide positive leak tight shut-off, high flow capacity, and quick
More informationD5 & 10-5 SERIES AIR OPERATED LIQUID PUMPS
D & 1- SERIES AIR OPERATED LIQUID PUMPS PRESSURE RATIO OLD & NEW PART NUMBERS In the mid 199 s with the advent of a new inventory and computer system, SC Hydraulic Engineering was forced to change the
More informationHigh Torque Vane Motor MV015 Series Technical Data Sheet
High Torque Vane Motor MV15 Series Technical Data Sheet R 1551 Edition: 213-11 Maximum operating pressure: 3 psi (27 bar) Code 61 Features Use: Medium speed, high torque applications requiring reliability
More information