Housings and Miscellaneous Parts

Transcription

1 Housings and Miscellaneous Parts Standard and Special Valve Housings, Orifice Disks, Orifice Sizing harts, Pilot Pistons, dapters, djustment Kits and Seal Kits ETON Vickers Screw-in artridge Valves V-VLOV-M001-E1 une 003-1

2 Housings and Miscellaneous Parts Section contents Page Standard housings -**-...luminum (Light duty) **-...luminum (NFP fatigue rated) **-...Steel (NFP fatigue rated) **-3/3S...luminum (Light duty) **-3/3S...luminum (NFP fatigue rated) **-3...Steel (NFP fatigue rated) **-3S...Steel (NFP fatigue rated) S...Steel (NFP fatigue rated) special housings for EPV16 only **-4...luminum (Light duty) **-4...luminum (NFP fatigue rated) **-4...Steel (NFP fatigue rated) **-5S...Steel and aluminum (NFP fatigue rated) (special housings for PFRD/S only) Port dimensions - all housings Special Housings - Load control valves Part numbers - V, PO, V housings size V, PO housings size V, PO housings size V housings size V housings Special Housings - olt on manifold for Eaton spool and disk motors Overview Dual V package with brake release shuttle for H & T series Eaton motors Dual PO package with brake release shuttle for H & T series Eaton motors ross over relief valve package for H & T series Eaton motors ross over relief valve package for 000 series Eaton motors Dual V package with brake release shuttle for 000 series Eaton motors Dual PO package with brake release shuttle for 000 series Eaton motors avity plugs Standard cavity plugs Special cavity plugs Orifice discs and orifice sizing chart Orifice discs Orifice sizing chart (Metric) Orifice sizing chart (US units) Miscellaneous parts Pilot pistons Sense check kits and panel mount adapters Miscellaneous parts / adjustment kits djustment kits Seal kits ETON Vickers Screw-in artridge Valves V-VLOV-M001-E1 une 003

3 -**- luminum housings (Light duty) HOUSING PORTS 1 & PRT NUMER ODE 10 3/8 SPP ()3 SE ()6T 16 3/4 SPP ()6 SE ()1T 0 1 SPP ()8 SE ()16T E D Notes SPP porting is designated by in the model code SE porting is designated by T in the model code. Light duty aluminum housings are intended for applications up to 10 bar (3000 psi) with light to moderate duty cycles. G 1 F I H DIMENSIONS D E F G H I MSS kg (lb) ,8 19,0 50,8 31,7 15,9 19,0 7,1 3,1 1,7 0,1 (.00) (0.75) (.00) (1.5) (0.6) (0.75) (0.8) (0.1) (0.50) (0.35) , 8,5 76, 47,6 3,8 5,4 8,6 4,0 19,0 0,5 (3.0) (1.1) (3.00) (1.87) (0.94) (1.00) (0.34) (0.16) (0.75) (1.1) -0-88,9 34,3 88,9 68,5 34,3 36,8 8,6 4,0 1,6 0,8 (3.5) (1.35) (3.50) (.70) (1.35) (1.45) (0.34) (0.16) (0.85) (1.90) ETON Vickers Screw-in artridge Valves V-VLOV-M001-E1 une 003-3

4 -**- luminum housings (NFP fatigue rated) HOUSING PORTS 1 & PRT NUMER ODE 8 1/4 SPP ()G 3/8 SPP ()3G SE ()4H SE ()6H SE ()8H 10 1/4 SPP ()G 3/8 SPP ()3G SE ()6H SE ()8H 1 1/ SPP ()4G 3/4 SPP ()6G SE ()10H SE ()1H HOUSING PORTS 1 & PRT NUMER ODE 1 U 1/ SPP ()4G 3/4 SPP ()6G SE ()10H SE ()1H 16 1/ SPP ()4G 3/4 SPP ()6G SE ()10H SE ()1H 0 3/4 SPP ()6G 1 SPP ()8G SE ()1H SE ()16H Notes SPP porting is designated by G in the model code SE porting is designated by either H or T in the model code. E D E D Fatigue rated aluminum housings are intended for applications up to 10 bar (3000 psi) with harsh duty cycles. These housings have been fatigue rated to NFP standards to one million cycles. G G I H 1 I 1 F ll except 1 (U) H 1 (U) F DIMENSIONS D E F G H I MSS kg (lb) -8-50,8 19,0 51,0 38,1 19,0 3,4 15,5 7,1 1,7 0, (.00) (0.75) (.00) (1.50) (0.75) (0.13) (0.61) (0.8) (0.50) (0.46) ,5 5,4 63,5 50,8 5,4 9,5 0,8 7,1 19,0 0,4 (.50) (1.00) (.50) (.00) (1.00) (0.37) (0.81) (0.8) (0.75) (1.00) -1-(U) 88,9 44,5 88,9 50,8 5,4 1,7 8,7 63,5 63,5 0,8 (3.50) (1.75) (3.50) (.00) (1.00) (0.50) (1.13) (.50) (.50) (1.96) ,9 34,9 88,9 63,5 31,7 10,3 8,4 8,7 5,4 1, (3.50) (1.37) (3.50) (.50) (1.5) (0.40) (1.11) (0.34) (1.00) (.75) ,6 38,1 101,6 8,5 41,3 10,3 36,0 8,7 5,4 1,8 (4.00) (1.50) (4.00) (3.5) (1.6) (0.40) (1.41) (0.34) (1.00) (4.00) -4 ETON Vickers Screw-in artridge Valves V-VLOV-M001-E1 une 003

5 -**- Steel housings (NFP fatigue rated) HOUSING PORTS 1 & PRT NUMER ODE 8 1/4 SPP (S)G 3/8 SPP (S)3G SE (S)4T SE (S)6T SE (S)8T 10 1/4 SPP (S)G 3/8 SPP (S)3G SE (S)6T SE (S)8T 1 1/ SPP (S)4G 3/4 SPP (S)6G SE (S)10T SE (S)1T HOUSING PORTS 1 & PRT NUMER ODE 1 U 1/ SPP (S)4G 3/4 SPP (S)6G SE (S)10T SE (S)1T 16 1/ SPP (S)4G 3/4 SPP (S)6G SE (S)10T SE (S)1T 0 3/4 SPP (S)6G 1 SPP (S)8G SE (S)1T SE (S)16T Notes SPP porting is designated by G in the model code SE porting is designated by T in the model code. E D E D Fatigue rated steel housings are intended for applications up to 350 bar (5000 psi) with harsh duty cycles. These housings have been fatigue rated to NFP standards to one million cycles. F I G F G 1 1 I H H I Ø 1 (U) DIMENSIONS D E F G H I MSS kg (lb) -8-* 50,8 19,0 50,8 38,1 19,0 15,5 38,1 3,3 43,9 7,1 0,5 (.00) (0.75) (.00) (1.50) (0.75) (0.61) (1.50) (0.13) (1.73) (0.8) (1.19) ,5 5,4 63,5 44,4, 19,0 50,8 9,5 44,4 7,1 0,3 (.50) (1.00) (.50) (1.75) (0.87) (0.75) (.00) (0.37) (1.75) (0.8) (0.83) -1-(U) 88,9 8,5 88,9 50,8 5,4 8,7 76, 1,7 63,5 10,3 1,9 (3.50) (1.1) (3.50) (.00) (1.00) (1.13) (3.00) (0.50) (.50) (0.40) (4.8) ,9 38,1 76, 50,8 5,4 5,4 63,5 1,7 63,5 10,3, (3.50) (1.750) (3.00) (.00) (1.00) (1.00) (.50) (0.50) (.50) (0.40) (5.00) ,6 41, 88,9 63,5 31,7 31,7 76, 1,7 76, 10,3 3,6 (4.00) (1.6) (3.50) (.50) (1.5) (1.5) (3.00) (0.50) (3.00) (0.40) (7.96) * 8 series housing utilize a slot instead of a mounting hole. ETON Vickers Screw-in artridge Valves V-VLOV-M001-E1 une 003-5

6 -**-3/3S luminum housings (Light duty) PORTS PRT HOUSING 1, & 3 NUMER ODE /8 SPP ()3 SE ()6T 10 3S 3/8 SPP ()3 SE ()6T /4 SPP ()6 SE ()1T 16 3S 3/4 SPP ()6 SE ()1T SPP ()8 SE ()1T 0 3S 1 SPP ()8 SE ()16T Notes SPP porting is designated by in the model code SE porting is designated by T in the model code. Light duty aluminum housings are intended for applications up to 10 bar (3000 psi) with light to moderate duty cycles. G I 3 F 1 E H D DIMENSIONS D E F G H I MSS ,5 31,7 66,6 31,7 15,8 3,1 19,0 34,9 7,1 1,7 0,3 (.50) (1.5) (.6) (1.5) (0.6) (0.1) (0.75) (1.37) (0.8) (0.50) (0.64) -10-3S 63,5 34,9 69,8 38,1 19,1 3,1 1,7 31,7 7,1 1,7 0, (.50) (1.37) (.75) (1.50) (0.75) (0.1) (0.50) (1.5) (0.8) (0.50) (0.51) ,6 50,8 107,9 50,8 5,4 4,0 5,4 53,9 8,6 5,4 1,0 (4.00) (.00) (4.5) (.00) (1.00) (0.16) (1.00) (.1) (0.33) (1.00) (.3) -16-3S 88,9 47,6 88,9 60,3 30,1 4,0 17,4 38,1 8,7 19,0 0,7 (3.50) (1.87) (3.50) (.37) (1.63) (0.16) (0.68) (1.50) (0.34) (0.75) (1.66) ,3 57,1 139,7 63,5 31,7 4,0 31,7 7,1 10,4 5,4 1,7 (4.50) (.5) (5.50) (.50) (1.5) (0.16) (1.5) (.84) (0.41) (1.00) (3.9) -0-3S 101,6 57,1 107,9 69,8 34,9 4,0 0,6 50,8 8,7 19,0 1, kg (lb) -6 ETON Vickers Screw-in artridge Valves V-VLOV-M001-E1 une 003

7 -**-3/3S luminum housings (NFP fatigue rated) PORTS PRT HOUSING 1, & 3 NUMER ODE 8 3 1/4 SPP ()G 3/8 SPP ()3G SE ()4H SE ()6H /4 SPP ()G 3/8 SPP ()3G SE ()6H SE ()8H 10 3S 1/4 SPP ()G 3/8 SPP*** ()3G SE ()6H SE 8** ()8H 1 3 3/8 SPP ()3G 1/ SPP ()4G SE ()10H SE ()1H 1 3S 1/ SPP* ()4G 3/4 SPP* ()6G SE 10** ()10H SE 1** ()1H PORTS PRT HOUSING 1, & 3 NUMER ODE / SPP ()4G 3/4 SPP 8767 ()6G SE ()10H SE ()1H 16 3S 1/ SPP ()4G 3/4 SPP ()6G SE ()10H SE ()1H 0 3 1/ SPP ()4G 3/4 SPP*** ()6G SE ()10H SE ()1H 0 3S 3/4 SPP ()6G 1 SPP ()8G SE ()1H SE ()16H * Port 3 = 3/8 SPP ** Port 3 = SE 6 *** Port 3 = 1/4 SPP Notes SPP porting is designated by G in the model code SE porting is designated by either H or T in the model code. Note Fatigue rated aluminum housings are intended for applications up to 10 bar (3000 psi) with harsh duty cycles. These housings have been fatigue rated to NFP standards to one million cycles. E D G I 3 F 1 H DIMENSIONS D E F G H I MSS kg (lb) ,5 31,8 66,6 38,1 19,0 3,4 15,5 9,8 7,1 13,0 0,4 (.50) (1.5) (.6) (1.50) (0.75) (0.13) (0.61) (1.17) (0.8) (0.51) (0.83) , 38,1 76, 50,8 5,4 9,5 0,8 36,6 7,1 19,0 0,7 (3.00) (1.50) (3.00) (.00) (1.00) (0.37) (0.81) (1.44) (0.8) (0.75) (1.65) -10-3S 76, 38,1 76, 50,8 5,4 9,5 16,8 33,5 7,1 19,0 0,7 (3.00) (1.50) (3.00) (.00) (1.00) (0.37) (0.66) (1.3) (0.8) (0.75) (1.65) ,9 44,5 107,9 50,8 5,4 1,7 8,7 51,6 10,3 1,7 0,8 (3.50) (1.75) (4.5) (.00) (1.00) (0.50) (1.13) (.03) (0.41) (0.50) (1.80) -1-3S 88,9 44,5 101,6 50,8 5,4 1,7 3,0 4,1 10,3 1,7 0,8 (3.50) (1.75) (4.00) (.00) (1.00) (0.50) (0.91) (1.66) (0.41) (0.50) (1.80) ,3 60,3 114,3 63,5 31,7 10,3 8,4 57,0 8,7 5,4,0 (4.50) (.37) (4.50) (.50) (1.5) (0.40) (1.1) (.4) (0.34) (1.00) (4.50) -16-3S 114,3 60,3 114,3 63,5 31,7 10,3 0,4 41,1 8,7 5,4,0 (4.50) (.37) (4.50) (.50) (1.5) (0.40) (0.80) (1.6) (0.34) (1.00) (4.40) ,0 63,5 139,7 8,5 41, 10,3 36,0 76,5 8,7 5,4 3,5 (5.00) (.50) (5.50) (3.5) (1.6) (0.40) (1.4) (3.01) (0.34) (1.00) (7.71) -0-3S 17,0 63,5 17,0 8,5 41, 10,3 4,9 55,0 8,7 5,4 3,6 (5.00) (.50) (5.00) (3.5) (1.6) (0.40) (0.98) (.17) (0.34) (1.00) (8.00) ETON Vickers Screw-in artridge Valves V-VLOV-M001-E1 une 003-7

8 -**-3 Steel housings (NFP fatigue rated) PORTS PRT HOUSING 1, & 3 NUMER ODE 8 3 1/4 SPP (S)G 3/8 SPP (S)3G SE (S)4T SE (S)6T /4 SPP (S)G 3/8 SPP (S)3G SE (S)6T SE (S)8T 1 3 1/ SPP (S)G 3/8 SPP (S)3G SE (S)10T SE (S)1T / SPP (S)4G 3/4 SPP (S)6G SE (S)10T SE (S)1T 0 3 3/4 SPP (S)6G 1 SPP (S)8G SE (S)1T SE (S)16T K H 1 I 3 E D F G Ø Notes SPP porting is designated by in the model code SE porting is designated by T in the model code. Notes Fatigue rated steel housings are intended for applications up to 350 bar (5000 psi) with harsh duty cycles. These housings have been fatigue rated to NFP standards to one million cycles. DIMENSIONS D E F G H I K MSS kg (lb) -8-3* 63,5 31,8 66,0 38,1 19,0 15,5 53,0 3,3 56,6 7,1 9,8 0,9 (.50) (1.5) (.75) (1.50) (0.75) (0.61) (.1) (0.13) (.3) (0.8) (1.17) (.15) , 38,1 76, 44,4, 19,0 63,5 9,5 57,1 7,1 34,9 1,7 (3.00) (1.50) (3.00) (1.75) (0.87) (0.75) (.50) (0.37) (.5) (0.8) (1.37) (3.75) ,9 44,4 101,6 50,8 5,4 8,7 88,9 1,7 63,5 10,3 51,5 3,0 (3.50) (1.75) (4.00) (.00) (1.00) (1.13) (3.50) (0.50) (.50) (0.40) (.03) (6.75) ,6 50,8 107,9 50,9 5,4 5,4 88,9 1,7 76, 10,3 53,9 3,4 (4.00) (.00) (4.5) (.00) (1.00) (1.00) (3.50) (0.50) (3.00) (0.40) (.1) (7.70) ,3 57,1 139,7 63,5 31,7 31,7 114,3 19,0 76, 11,9 7, 6,4 (4.50) (.5) (5.50) (.50) (1.5) (1.5) (4.50) (0.75) (3.00) (0.47) (.84) (14.30) * 8 Series housings utilize a slot instead of mounting holes. -8 ETON Vickers Screw-in artridge Valves V-VLOV-M001-E1 une 003

9 -**-3S Steel housings (NFP fatigue rated) PRT HOUSING PORTS 1 & PORT 3 NUMER ODE 10 3S 3/8 SPP 1/4 SPP (S)3G 1/ SPP 1/4 SPP (S)4G SE 6 SE (S)6T SE 8 SE (S)8T SE 10 SE (S)10T 1 3S 1/ SPP 3/8 SPP (S)4G 3/4 SPP 3/8 SPP (S)6G SE 10 SE (S)10T SE 1 SE (S)1T 16 3S 1/ SPP 3/8 SPP (S)6G 3/4 SPP 3/8 SPP (S)6G SE 10 SE (S)10T SE 1 SE (S)1T 0 3S 3/4 SPP 3/8 SPP (S)6G 1 SPP 3/8 SPP (S)8G SE 1 SE (S)1T SE 16 SE (S)16T Notes SPP porting is designated by G in the model code SE porting is designated by T in the model code. E D E D Fatigue rated steel housings are intended for applications up to 350 bar (5000 psi) with harsh duty cycles. These housings have been fatigue rated to NFP standards to one million cycles. K G 3 I F K 3 F G 1 LØ -10 & -1 H H 1 I -16 & -0 LØ DIMENSIONS D E F G H I K LØ MSS kg (lb) -10-3S 63,5 31,8 76, 41,3 0,7 36,6 53,8 11, 53,8 9,7 19,8 8,7 1,08 (.50) (1.5) (3.00) (1.63) (0.8) (1.44) (.1) (0.44) (.1) (0.38) (0.78) (0.34) (.40) -1-3S 88,9 44,5 101,6 50,8 5,4 41,9 76, 31,7 57,1 1,7 3,1 10,3,4 (3.50) (1.75) (4.00) (.00) (1.00) (1.65) (3.00) (1.5) (.5) (0.50) (0.91) (0.40) (5.40) -16-3S 88,9 41, 88,9 50,8 5,4 38,1 69,8 1,7 63,5 19,0 17,4 10,3,6 (3.50) (1.6) (3.50) (.00) (1.00) (1.50) (.75) (0.50) (.50) (0.75) (0.68) (0.40) (5.90) -0-3S 101,6 44,4 114,3 63,5 31,7 50,8 88,9 1,7 76, 5,4 0,6 10,3 4,6 (4.00) (1.75) (4.50) (.50) (1.5) (.00) (3.50) (0.50) (3.00) (1.00) (0.81) (0.40) (10.4) ETON Vickers Screw-in artridge Valves V-VLOV-M001-E1 une 003-9

10 -16-3S Steel (NFP fatigue rated) Special housings for EPV16 only For use with EPV16- or only HOUSING NUMER LUMINUM STEEL ODE PORT SIZE EPV16- EPV16- EPV16- EPV16-4G 1/ SPP G 3/4 SPP H SE H SE T SE T SE ETOP5 (NFP D05) interface (Requires steel housing) MODEL D E F G ØH MSS kg (lb) lum Steel Modified -16-3S 76, 30, 79, 100,8 38,1 1,7 1,6 8,7 60,4,0 6,0 body (3.00) (1.19) (3.1) (3.97) (1.50) (0.50) (0.85) (0.34) (.38) (4.50) (13.5) Modified housing for use with EPV16-. ØH ( places) Port G F ( places) E Modified housing for use with EPV16-. ØH ( places) Port D "" G F ( places) -10 ETON Vickers Screw-in artridge Valves V-VLOV-M001-E1 une 003

11 -**-4 luminum housings (Light duty) PORTS 1, PRT HOUSING, 3 & 4 NUMER ODE /8 SPP ()3 SE ()6T /4 SPP ()6 SE ()1T SPP ()8 SE ()16T HOUSING (FD*-**ONLY) /8 SPP ()3 SE ()6T /4 SPP ()6 SE ()1T Notes SPP porting is designated by in the model code SE porting is designated by T in the model code. Note Light duty aluminum housings are intended for applications up to 10 bar (3000 psi) with light to moderate duty cycles. E D E D H H G 3 4 K G 3 4 K I F 1 I F (FD*-**only) DIMENSIONS D E F G H I K MSS ,5 31,7 8,5 31,7 15,8 3,1 34,9 19,0 7,1 9,5 50,8 0,3 (.50) (1.5) (3.5) (1.5) (0.6) (0.1) (1.37) (0.75) (0.8) (0.37) (.00) (0.7) ,6 50,8 133,3 50,8 5,4 3,8 53,9 5,4 8,7, 8,5 1,4 (4.00) (.00) (5.5) (.00) (1.00) (0.15) (.1) (1.00) (0.34) (0.87) (3.5) (3.4) ,3 57,1 117,8 63,5 31,7 4,0 7,1 31,7 10,4 5,4 113,5,6 (4.50) (.5) (7.00) (.50) (1.5) (0.16) (.84) (1.5) (0.41) (1.00) (4.47) (5.76) Note For housings for V valves see page -5. kg (lb) ETON Vickers Screw-in artridge Valves V-VLOV-M001-E1 une

12 -**-4 luminum housings (NFP fatigue rated) PORTS 1, PRT HOUSING, 3 & 4 NUMER ODE 8 4 1/4 SPP ()G 3/8 SPP ()3G SE ()6H SE ()8H /4 SPP ()G 3/8 SPP ()3G SE ()6H SE ()8H / SPP ()4G 3/4 SPP ()6G SE ()10H SE ()1H 0 4 3/4 SPP ()6G 1 SPP ()8G SE ()1H SE ()16H G I 3 F 1 4 E D H K G I 4 3 F ( FD* **only) E D H K HOUSING (FD*-**ONLY) /4 SPP ()G 3/8 SPP ()3G SE ()6H SE ()8H Notes SPP porting is designated by G in the model code SE porting is designated by either H in the model code. Fatigue rated aluminum housings are intended for applications up to 10 bar (3000 psi) with harsh duty cycles. These housings have been fatigue rated to NFP standards to one million cycles. For and -1-4 housings for V valves see pages -5 & -7 respectively. DIMENSIONS D E F G H I K MSS , 38,1 88,9 50,8 5,4 9,5 36,6 0,8 7,1 1,7 5,5 0,9 (3.00) (1.50) (3.50) (.00) (1.00) (0.37) (1.44) (0.8) (0.8) (0.50) (.07) (.00) ,3 60,3 139,7 63,5 31,7 10,3 57,0 8,4 8,7 5,4 85,5,4 (4.50) (.37) (5.50) (.50) (1.5) (0.40) (.4) (1.1) (0.34) (1.00) (3.37) (5.9) ,0 63,5 177,8 8,5 41, 10,3 76,5 36,0 8,7 19,0 117,8 4,7 (5.00) (.50) (7.00) (3.5) (1.6) (0.40) (3.01) (1.4) (0.34) (0.75) (4.63) (10.5) kg (lb) -1 ETON Vickers Screw-in artridge Valves V-VLOV-M001-E1 une 003

13 -**-4 Steel housings (NFP fatigue rated) PORTS 1, PRT HOUSING, 3 & 4 NUMER ODE 8 4 1/4 SPP (S)G 3/8 SPP (S)3G SE (S)4T SE (S)6T /4 SPP (S)G 3/8 SPP (S)3G SE (S)6T SE (S)8T / SPP (S)4G 3/4 SPP (S)6G SE (S)10T SE (S)1T 0 4 1/ SPP (S)4G 3/4 SPP (S)6G SE (S)1T SE (S)16T Notes SPP porting is designated by G in the model code SE porting is designated by T in the model code 8 series utilize slot in place of mounting hole. Fatigue rated steel housings are intended for applications up to 350 bar (5000 psi) with harsh duty cycles. These housings have been fatigue rated to NFP standards to one million cycles. For and -1-4 housings for V valves see pages -4 & -7 respectively. L H 3 1 I 4 E D F G Ø K DIMENSIONS D E F G H I K L MSS -8-4* 63,5 31,8 8,6 38,1 19,0 15,5 44,1 3,3 57,1 7,1 73,0 9,8 1, (.50) (1.5) (3.5) (1.50) (0.75) (0.61) (1.74) (0.13) (.5) (0.8) (.88) (1.17) (.70) , 38,1 88,9 44,4, 19,0 50,8 9,5 57,1 7,1 76, 34,9 1,9 (3.00) (1.50) (3.50) (1.75) (0.87) (0.75) (.00) (0.37) (.5) (0.8) (3.00) (1.37) (4.35) ,6 50,8 139,7 50,8 5,4 5,4 8,5 1,7 76, 10,3 10,6 53,9 5,6 (4.00) (.00) (5.50) (.00) (1.00) (1.00) (3.5) (0.50) (3.00) (0.40) (4.75) (.1) (1.40) ,3 57,1 177,8 63,5 31,7 31,7 113,5 19,0 76, 11,8 15,4 7,1 8, (4.50) (.5) (7.00) (.50) (1.5) (1.5) (4.47) (0.75) (3.00) (0.47) (6.00) (.84) (18.0) * 8 Series housings utilize slot instead of mounting holes. kg (lb) ETON Vickers Screw-in artridge Valves V-VLOV-M001-E1 une

14 -**-5S Steel and aluminum housings (NFP fatigue rated) Special housings for PFRD/S only PORTS LUMINUM PRT STEEL PRT HOUSING,3,4 PORT 5 NUMER ODE NUMER ODE 1 5S SE 10 SE ()10T (S)10T SE 1 SE ()1T (S)1T 1/ SPP 1/4 SPP ()04G (S)04G 3/4 SPP 1/4 SPP ()06G (S)06G 16 5S SE 1 SE ()1T (S)1T SE 16 SE ()16T (S)16T 3/4 SPP 1/4 SPP ()06G (S)06G 1 SPP 1/4 SPP ()08G (S)08G 0 5S SE 1 SE ()1T (S)1T SE 16 SE ()16T (S)16T 3/4 SPP 1/4 SPP ()06G (S)06G 1 SPP 1/4 SPP ()08G (S)08G Notes SPP porting is designated by G in the model code SE porting is designated by T in the model code. Fatigue rated aluminum and steel housings are intended for applications up to 10 bar (3000 psi) and 350 bar (5000 psi) respectively with harsh duty cycles. These housings have been fatigue rated to NFP standards to one million cycles. 4 -**-5S avity 5 Note Port 1 unused, blind cavity is machined into this housing. ETON HYDRULIS, IN. Model Number 3 "499XXXX-XXX" This number will depend on which manifold is ordered DIMENSIONS D E F G H I K L M DIM. N -1-5S 100,8 50,4 96,3 37,3 18,7 16,7 54,0 34,1 73,8 10, 88,9 1,7 88,9 8,7 (3.97) (1.99) (3.79) (1.47) (0.74) (0.66) (.13) (1.34) (.91) (0.40) (3.50) (0.50) (3.50) (0.34) -16-5S 100,8 51,4 113,5 50,0 5,0 16,9 58,8 36,1 81,3 10, 101,6 1,7 88,9 8,7 (3.97) (.0) (4.47) (1.97) (0.99) (.066) (.34) (1.4) (3.0) (0.40) (4.00) (0.50) (3.50) (0.34) -0-5S 113,5 56,8 16, 75,4 37,7 16,8 6,3 37,6 87,4 10, 114,3 1,7 101,6 8,7 (4.47) (.4) (4.97) (.97) (1.49) (0.66) (.45) (1.48) (3.44) (0.40) (4.50) (0.50) (4.00) (0.34) -14 ETON Vickers Screw-in artridge Valves V-VLOV-M001-E1 une 003

15 Port Key dimensions in all standard housings MINIMUM MINIMUM FULL SE SIZE THRED SIZE SPOTFE Ø THD DEPTH UNF- 1,1 (0.8) 11,5 (0.45) UNF- 4,7 (0.96) 1,7 (0.50) UNF- 30, (1.18) 14, (0.56) UNF- 34, (1.34) 16,6 (0.65) UN- 41,3 (1.6) 19,0 (0.75) UN- 48,6 (1.91) 19,0 (0.75) MINIMUM MINIMUM FULL SPP THRED SIZE SPOTFE Ø THD DEPTH 1/4 4 (0.94) 1, (0.48) 3/8 7 (1.06) 1, (0.48) 1/ 33 (1.9) 15,0 (0.59) 3/4 4 (1.65) 16,3 (0.64) 1 47 (1.85) 19,1 (0.75) Spotface Ø 0,8 (0.03) Min. full thread depth V, PO and V Housings Housing part numbers shown on the following pages are for the counterbalance, vented counterbalance, and pilot-toopen check valves (V1/, V1, PO1). Housing dimensions for inline housings are shown on pages 6, 7 and 9. for other housings are shown on pages -18 to -35. V1/, PO1 VLVE HOUSINGS SIZE 10 HOUSING PORT LUMINUM SIZE 10 SIZE 10 SIZE 1 SIZE 1 TYPE SIZE LIGHT DUTY LUMINUM STEEL LUMINUM STEEL I 3 (3/8 SPP) Inline 6H (SE 6) Mounted 8H (SE 8) T (SE 6) T (SE 8) T (SE 10) T (SE 1) G (1/4 SPP) G (3/8 SPP) G (1/ SPP) G (3/4 SPP) olt Pad 6T (3/4 SE code 61 flange, SE4 pilot port) N 6H (SE 6) lose oupled, 6T (SE 6) Nipple Mounted 8T (SE 8) G (3/8 SPP) G (1/ SPP) G 6H (SE 6) Gasket 6T (SE 6) Mounted, 8T (SE 8) Single 3G (3/8 SPP) G (1/ SPP) ETON Vickers Screw-in artridge Valves V-VLOV-M001-E1 une

16 V, PO and V Housings (cont.) V1/, PO1 SIZE 10 HOUSING PORT LUMINUM SIZE 10 SIZE 10 SIZE 1 SIZE 1 TYPE SIZE LIGHT DUTY LUMINUM STEEL LUMINUM STEEL D 6H (SE 6) Dual Line 8H (SE 8) Mounted 10H (SE 10) T (SE 6) T (SE 8) T (SE 10) T (SE 10) G (1/4 SPP) G (3/8 SPP) G (1/ SPP) P 6H (SE 6) Dual Gasket 6T (SE 6) Mounted 8T (SE 8) G (3/8 SPP) G (1/ SPP) M 6H (SE 6) Dual 8H (SE 8) ounterbalance 10H (SE 10) Line Mounted 6T (SE 6) w/integral 8T (SE 8) Shuttle Valve 10T (SE 10) T (SE 10) G (1/4 SPP) G (3/8 SPP) G (1/ SPP) H 10T (SE 10) K 10T (SE 10) Dual ounterbalance olt on Manifolds for Eaton Hydraulic Motors V VLVE HOUSINGS SIZE 10 HOUSING PORT LUMINUM SIZE 10 SIZE 10 SIZE 1 SIZE 1 TYPE SIZE LIGHT DUTY LUMINUM STEEL LUMINUM STEEL I 6H (SE 6) Inline 8H (SE 8) * Mounted 10H (SE 10) * T (SE 6) T (SE 8) * T (SE 10) * T (SE 1) - * * ETON Vickers Screw-in artridge Valves V-VLOV-M001-E1 une 003

17 V, PO and V Housings (cont.) V valve housings SIZE 10 HOUSING PORT LUMINUM SIZE 10 SIZE 10 SIZE 1 SIZE 1 TYPE SIZE LIGHT DUTY LUMINUM STEEL LUMINUM STEEL I G (1/4 SPP) G (3/8 SPP) * * G (1/ SPP) * * G 6H (SE 6) Gasket 8H (SE 8) Mounted, 6T (SE 6) Single 8T (SE 8) G (3/8 SPP) G (1/ SPP) D 6H (SE 6) Dual Line 8H (SE 8) Mounted 6T (SE 6) T (SE 8) T (SE 10) T (SE 1) * * G (3/8 SPP) G (1/ SPP) - * * * Housings with slot PPROXIMTE WEIGHT KG. (LS) FOR V, PO & V VLVE HOUSINGS LUMINUM STNDRD LUMINUM STNDRD LUMINUM STEEL STEEL V/PO V LIGHT DUTY V/PO V SIZE SIZE SIZE SIZE SIZE SIZE SIZE SIZE SIZE SIZE SIZE HOUSING I 0,75 0,8 1,18 0,85 0,95 0,3 1,08,63 3,40 1,3 3,05 (1.65) (1.80) (.60) (1.87) (.09) (0.51) (.40) (5.40) (7.50) (.71) (6.7) 0,86,61 (1.90) (5.75) N 0,49 0,91 1,49,7 (1.10) (.00) (3.30) (6.00) G 0,67 0,73 0,85 0,95,49,15 1,3 3,05 (1.85) (1.60) (1.87) (.09) (5.50) (4.75) (.71) (6.7) D 0,79 1,11 1,77 1,60 1,10,38 3,33 5,14,55 3,70 (1.75) (.45) (3.90) (3.5) (.4) (5.5) (7.35) (11.30) (5.6) (8.15) P 0,7,0,17 5,90 (1.60) (4.40) (4.80) (10.00) H 1,4 (.73) K 1,67 (3.67) ETON Vickers Screw-in artridge Valves V-VLOV-M001-E1 une

18 Size 10 Housings V1/ and PO1 I Inline, aluminum & steel PORT SIZE 1 3 6T SE 6 SE 6 SE 6 3 3/8 SPP 3/8 SPP 3/8 SPP See standard inline housings: Light duty housings - page -6 Fatigue rated housings - page -7 Steel housings - page -9 N - lose coupled nipple mounted - aluminum and steel (NFP fatigue rated) PORT SIZE LUMINUM STEEL 1,V1,V 6H 6T SE 8 SE 6 3G 3G 3/8 SPP 3/8 SPP See page -15 for housing part numbers. 14, (0.56) 40,6 (1.60) 18,3 (0.7) 18,3 (0.7) 14, (0.56) V 65,5 (.58) 81,8 (3.) V1 37,8 (1.49) 1 59,4 (.34) 45,4 (1.79) avity 75,4 (.97) -18 ETON Vickers Screw-in artridge Valves V-VLOV-M001-E1 une 003

19 Size 10 Housings V1/ and PO1 G - Gasket mounted, single - aluminum and steel (NFP fatigue rated) PORT SIZE LUMINUM STEEL 1,V1,V 6H 6T Ø 1,7(0.5) SE 6 3G 3G Ø 1,7(0.5) 3/8 SPP See page -15 for housing part numbers. avity 41,3 (1.63) 56,4 (.) 19,8 (0.78) 7,8 (0.31) Dia. thru 1,7 (0.5) Dia c bore x 6,35 (0.5) places 1 V1 19,1 (0.75) 38,1 (1.50) 6,7 (.47) 94,5 (3.7) 57,9 (.8) V 17,5 (0.69) 15,9 (0.63) 57,9 (.8) 44,5 (1.75) 6,7 (.47) 15,7 (0.6) 38,1 (1.50) 1 Port -113 O-ring D - Dual line mounted - aluminum and steel (NFP fatigue rated) PORT SIZE LUMINUM STEEL 1,,V1,V 6H 6T SE 6 8H 8T SE 8 10H 10T SE 10 G G 1/4 SPP 3G 3G 3/8 SPP 4G 4G 1/ SPP See page -15 for housing part numbers. 36,5 (1.44), (0.88) 77,1 (3.03) artridge cavity 44,5 (1.75) V1 75,4 (.97) 31,8 (1.5) Ø 8,6 (0.34) 63,5 through (.50) places 31,8 (1.5) V 44,5 (1.75),3 (0.88) 16,7 (0.66) 36,5 (1.44), (0.88) 80,6 (3.16) 113,5 (4.47) 77,1 (3.03), (0.88) 44,5 (1.75) 1 ETON Vickers Screw-in artridge Valves V-VLOV-M001-E1 une

20 Size 10 Housings V1/ and PO1 P - Dual gasket mounted - aluminum and steel (NFP fatigue rated) PORT SIZE LUMINUM STEEL 1,V1,V 6H 6T Ø 1,7(0.5) SE 6 3G 3G Ø 1,7(0.5) 3/8 SPP See page -15 for housing part numbers. 49,5 (1.95) 55,9 (.0) avity 46,1 (1.8) 1 O-Ring ,3 (4.50) 58,4 (.30) avity V 75,4 (.97) 49,5 (1.95) 36,6 (1.44) 31, (1.3) 14, (0.56) 6,7 (.47) 8,6 (0.34) diameter c'bore x 6,35 (0.5) deep plcs (1.95) 16,3 (0.64) 46,7 (1.84) V1,1 (0.87) M - Dual line mounted - aluminum and steel (NFP fatigue rated) PORT SIZE 1,, LUMINUM STEEL V1,V S 6H 6T SE 6 SE 4 8H 8T SE 8 SE 4 10H 10T SE 10 SE 4 G G 1/4 SPP 1/4 SPP 3G 3G 3/8 SPP 1/4 SPP 4G 4G 1/ SPP 1/4 SPP See page -15 for housing part numbers. V1 31,8 (1.5) 75,4 (.97) avity 8,6 (0.34) Dia. thru plcs. S 31,8 44,5 (1.5) (1.75) 63,5 (.5) V 44,5 (1.75) 16,8,3 (0.66) (0.88) 93,5 (3.68) 63,5 (.5) 17,0 (5.00),3 (0.88),3 (0.88) 44,5 (1.75) 90,4 (3.56) 36,6 (1.44) 1-0 ETON Vickers Screw-in artridge Valves V-VLOV-M001-E1 une 003

21 Size 1 Housings V1/ and PO1 I - Inline body - aluminum and steel (NFP fatigue rated) PORT YLINDER- VLVE- PILOT- SIZE PORT (1) PORT () PORT (3) 10T SE 10 SE 6 1T SE 1 SE 6 4G 1/ SPP 3/8 SPP 6G 3/4 SPP 3/8 SPP See page -15 for housing part numbers. See standard inline housings: luminum housings - page -7 Steel housings - page -9-3/4 4-olt Pad - aluminum and steel (NFP fatigue rated) PORT SIZE 1 PILOT- PORT 6T 3/4 SE 4 bolt SE 6 ode 61 See page -15 for housing part numbers. V 1,7 (0.5) x deep, places 6,7 (.47) 47,6 (1.88) 31,8 (1.5) 7,9 (0.3) 100,8 (3.97) 5,4 (.06) 63,5 (.5) avity Pilot Pilot 7,9 (0.31) 8,6 (1.13) 77,8 (3.06) 19,1 30, (1.19) (0.75), (0.88) 8,6 (1.13) 11, 8 (1.5) 6,7 (.47) 8,6 (1.13) 77,8 (3.06) 31,8 (1.5) 1 ETON Vickers Screw-in artridge Valves V-VLOV-M001-E1 une 003-1

22 Size 1 Housings V1/ and PO1 N - lose coupled nipple mounted - aluminum and steel (NFP fatigue rated) PORT SIZE 1, V1, V 8T 1/ NPTF SE 8 4G 1/ SPP 1/ SPP See page -15 for housing part numbers. artridge cavity V 7, (.84) 39,7 (1.56) 7, (.84) V1 88,1 (3.47) 1 39,7 (1.56) 0,6 (.81) 33,3 (1.31) 50,0 (1.97) 15,9 (0.63) 0,6 (0.81) 33,3 (1.31) 69,9 (.75) 100,8 (3.97) G - Gasket mounted, single - aluminum and steel (NFP fatigue rated) PORT SIZE 1, V1, V 8T Ø 15,8(0.65) SE 8 4G Ø 15,8(0.65) 1/ SPP See page -15 for housing part numbers. 10,3 (0.41) Dia. thru 15,0 (0.59) dia. c'bore x 7,8 (0.31) deep, places artridge cavity 70,6 (.78) V1 6,7 (.47) V 45, (1.78) 1 Port O-Ring ,3 (1.79) 17,5 (0.69) 17,4 (0.69) 45,4 (1.79) 3,0 (0.91) 67,5 (.66) 75,4 (.97) 19,1 (0.75) 44,5 (1.75) 6,7 (.47) 3,1 (0.91) 70,6 (.78) 113,5 (4.47) - ETON Vickers Screw-in artridge Valves V-VLOV-M001-E1 une 003

23 Size 1 Housings V1/ and PO1 D - Dual line mounted - aluminum and steel (NFP fatigue rated) PORT SIZE 1,, V1, V 10T SE 10 1T SE 1 4G 1/ SPP See page -15 for housing part numbers. artridge cavity V1 4,0 (1.66) 76, 88,1 (3.00) (3.47) 10,3 (0.41) dia. thru places 4,0 (1.66) V 50,8 (.00) 5,4 (1.00) 40,9 (1.61) 88,9 (3.50) 16, (4.97) 96,1 (3.91) 5,4 (1.00) 5,4 (1.00) 1 P - Dual gasket mounted (NFP fatigue rated) PORT SIZE 1, V1, V 8T Ø 15,8(0.65) SE 8 4G Ø 15,8(0.65) 1/ SPP See page -15 for housing part numbers. artridge cavity 6,9 (1.06) 68,3 (.7) 88,0 (3.47) 88,1 (3.47) 58,3 (.30) 44,7 (1.76) 35,8 (1.40) 9,8 (1.18) 133,4 (5.5) 67,9 (.67) 10.3 (0.41) dia. thru, 15.0 (0.59) dia. c"bore x 7.9 (0.31) deep, places 7,1 (1.06) artridge cavity V V1 7,1 (1.06) 50,1 (1.97) 68,9 (.7) 88,1 (3.47) 67,8 (.67) 1 - O-Ring 117 ETON Vickers Screw-in artridge Valves V-VLOV-M001-E1 une 003-3

24 Size 1 Housings V1/ and PO1 M - dual line mounted - with integral shuttle, counter balance only (NFP fatigue rated) 1, PORT SIZE V1, V S 10T SE 10 SE 4 1T SE 1 SE 4 4G 1/ SPP 1/4 SPP See page -15 for housing part numbers. artridge cavity V1 4,0 (1.66) 88,1 (3.47) 10,3 (0.41) dia. through, places S 56,4 (.5) 76, (3.00) 4,0 (1.66) V 50,8 (.00) 5,4 (1.00) 39,7 (1.56) 5,4 (1.00) 1,7 (0.50) 101,6 (4.00) 69,5 (.74) 16, (4.97) 86,5 (3.41) 1 5,4 (1.00) -4 ETON Vickers Screw-in artridge Valves V-VLOV-M001-E1 une 003

25 Size 10 Housings V1-10 I - Inline body - aluminum, light duty PORT SIZE 1,, 3 & 4 6T SE 6 See page -15 for housing part numbers. 15,8 (0.6) 31,7 (1.5) artridge cavity 63,5 (.50) 31,7 (1.5) 19,0 (0.75) 3 34,9 (1.37) 50,8 (.00) 8,5 (3.5) 4 3,1 (0.1) 7,1 (0.8) places 1 I - Inline body - aluminum (NFP Fatigue Rated) PORT SIZE 1 & 3 & 4 8H SE 8 SE 6 10H SE 10 SE 6 3G 3/8 SPP 1/4 SPP See page -15 for housing part numbers. 5,4 (1.00) 50,8 (.00) 5,4 (1.00) 3 9,5 (0.37) artridge cavity 88,9 (3.50) 76, (3.00) 38,1 (1.50) 76, (3.00) 19,0 (0.75) 5,4 (1.00) 4 50,8 (.00) 57, (.5) 7,1 (0.8) places 1 ETON Vickers Screw-in artridge Valves V-VLOV-M001-E1 une 003-5

26 Size 10 Housings V1 I - Inline body - Steel (NFP fatigue rated) PORT SIZE 1 & 3 &4 6T SE 8 SE 6 8T SE 10 SE 6 3G 3/8 SPP 1/4 SPP See page -15 for housing part numbers., (0.87) 3 9,5 (0.37), (0.87) artridge cavity 88,9 (3.50) 76, (3.00) 44,4 (1.75) 38,1 (1.50) 76, (3.00) 19,0 (0.75) 5,4 (1.00) 4 50,8 (.00) 57, (.5) 7,1 (0.8) places G - Gasket mounted, single aluminum and steel (NFP fatigue rated) PORT SIZE LUMINUM STEEL VENT 1, V1, V 6H 6T SE 6 Ø 1,7 SE 6 (0.500) N/ 8T SE 6 Ø 1,7 SE 8 (0.500) 3G 3G 1/4 SPP Ø 1,7 3/8 SPP (0.500) See page -15 for housing part numbers. 1 V1 artridge cavity 36,5 (1.44) 15,7 (0.6) 46,7 (1.84) 75,4 (.97) 65,0 (.56) 8,4 (1.1) 9, (1.15) 75,4 (.97) 36,5 (1.44) 15,7 (0.6) 1 Port -113 O-ring 46,7 (1.84),3 (0.88) 7,8 (0.31) Dia. thru 1,7 (0.5) c'bore x 6,35 (0.5) deep places 50,8 (.00) 100,8 (3.97) 81,7 (3.) Vent -6 ETON Vickers Screw-in artridge Valves V-VLOV-M001-E1 une 003

27 Size 10 Housings V1 D - Dual line mounted - aluminum and steel (NFP fatigue rated) PORT SIZE 1,, LUMINUM STEEL V1 & V VENT 6H 6T SE 6 SE 4 8H 8T SE 8 SE 4 3G 3G 3/8 SPP 1/4 SPP See page -15 for housing part numbers. 31,7 (1.5) 31,7 (1.5) artridge cavity places 68,0 (.68) 50,8 V 88,1 (.00) (3.47) 75,4 Ø 8,6 (0.34) (.97) places 50,8 (.00) 19,0 Vent (0.75) V1 34,0 (1.34) 16,7 (0.66) 31,7 (1.5) 31,7 (1.5) 8,5 (3.5) 100,8 (3.97) 68,0 (.68) 3,1 (0.91) 31,7 (1.5) 50,0 (1.97) 50,0 (1.97) 1 Size 1 Housings V1 artridge cavity 88,9 (3.50) 5,4 (1.00) 44,5 ( 1.75) 50,8 (.00) 5,4 (1.00) Tank port I - Inline body - luminum and Steel PORT SIZE 1 & 3 & 4 10T SE 10 SE 6 1T SE 1 SE 6 4G 1/ SPP 1/4 SPP See page -15 for housing part numbers. 3 51,6 (.03) Pilot port 10,6 (4.75) 10,7 (0.4) dia. through, places ylinder port 1 57,1 (.5) 1,7 (0.50) 44,5 (1.75) 8,7 (1.13) Valve port 4 74,5 (.93) ETON Vickers Screw-in artridge Valves V-VLOV-M001-E1 une 003-7

28 Size 1 Housings V1 G - Gasket mounted, single aluminum and steel (NFP fatigue rated) PORT SIZE VENT 1, V1, V 8T SE 6 Ø 15,8(0.65) SE 8 4G 1/4 SPP Ø 15,8(0.65) 1/ SPP See page -15 for housing part numbers. V V1 36,5 (1.44) 16,7 (0.66) 5,5 (0.7) 88,1 (3.47) 36,8 (1.75) 3,7 (1.9) 31,7 (1.5) 75,4 (.97) 36,5 (1.44) 16,7 (0.66) 1 Port -117 O-ring 54,8 (.16) 19,0 (0.75) 10,4 (0.41) Dia. thru 14,9 (0.59) c'bore x 7,87 (0.31) deep places 50,8 (.00) 13,5 (5.) 103,8 (4.09) Vent artridge cavity D - Dual line mounted - aluminum and steel (NFP fatigue rated) 1,, PORT SIZE V1 & V VENT 10T SE 10 SE 6 1T SE 1 SE 6 4G 1/ SPP 1/4 SPP See page -15 for housing part numbers. 41, (1.6) 5,4 (1.00) artridge places 85,3 (3.36) 74,7 V 10,6 (.93) (4.75) 107,9 Ø10,6 (0.4) (4.5) places 74,4 (.93) 45,7 Vent (1.80) V1 37,9 (1.49) 19,0 (0.75) 41, (1.6) 37,3 (1.47) 88,9 (3.50) 16, (4.97) 85,3 (3.36) 8,5 (1.1) 37,3 (1.47) 6,7 (.47) 6,7 (.47) 1-8 ETON Vickers Screw-in artridge Valves V-VLOV-M001-E1 une 003

29 Special Housings olt on Solutions artridge Valves & Manifolds for Spool & Disk Valve Motors We Manufacture Solutions Designing hydraulic systems with Eaton-Vickers artridge Valves & Manifolds is a cost effective way of bringing your design into production well within the most demanding of production schedules. Minimizing the use of hoses, tubing and fittings will reduce production and assembly time significantly. Features ompatible with Eaton H & T series spool valve motors, and most 000 series disk valve motors luminum Manifolds nodized lack Pre-set cartridges to your specifications 100% production tested assembly Wide range of settings available Intelligent model code Manifolds are available with out cartridge valves, or pre-assembled and tested to your specifications Manifolds and motors can be supplied as a pre-assembled package Dual counterbalance valve (with integral shuttle valve), dual pilot operated check valve and dual cross port relief valve packages are available Eaton H Series Hydraulic Motor ETON Vickers Screw-in artridge Valves V-VLOV-M001-E1 une 003-9

30 Dual V Package for H&T Series Motors artridge valves & manifolds for spool valve motors Dual ounterbalance Valve ssembly with rake Release Shuttle When the motor is in a stationary, unpowered mode, this assembly will prevent excessive drift in either direction of rotation. It will also prevent motor overspeed when exposed to an overrunning load, and will control motor deceleration to a stop. shuttle within the assembly provides a pilot to release a parking or holding brake as either motor port is pressurized. Typical applications are swing drives, winch drives, and vehicle propulsion circuits. If the shuttle is not required the rake port may be plugged. Functional Symbol How to Order omplete pre-assembled packages are specified using the V*-10 model code, position 6 of RTINGS ND SPEIFITIONS the model code is H. To order the manifold subassembly, without the two V valves, but with rake SE4 6,74 [.470] integral shuttle valve order Rated flow 60L/min(15USgpm) Rated pressure 10 bar (3000 psi) Internal leakage (maximum) 5 drops/min 77% of crack pressure Pilot ratio 4:1 or 10:1 Manifold sub-assembly only Installation kit (includes cap screws, washers and o-rings) For detailed specifications refer to the V*-10 data sheet on page H-6 Port Sizes, SE10 rake 88,14 [3.470] 53,4 [.103] 63,5 [.500] "" "" 31,74 [1.50] 57,15 [.50] "" "" ETON HYDRULIS, IN. Model Number "rake" 100,84 [3.970] 1,7 [0.500] 4XØ 8,71 [0.343] 19,53 [0.769] 44,45 [1.750] 69,37 [.731] -30 ETON Vickers Screw-in artridge Valves V-VLOV-M001-E1 une 003

31 Dual PO Package for H&T Series Motors artridge valves and manifolds for spool valve motors Dual Pilot Operated heck Valve ssembly When the motor is in a stationary, unpowered mode, this assembly will prevent excessive drift in either direction of rotation. lthough it not designed to modulate the flow of oil to or from the motor, it will also prevent motor runaway if an overrunning load exists in the powered mode. shuttle within the assembly provides a pilot to release a parking or holding brake as either motor port is pressurized. If the shuttle is not required the rake port may be plugged. How to Order omplete pre-assembled packages are specified using the PO1-10 model code, position 6 of the RTINGS ND SPEIFITIONS Rated flow 60L/min(15USgpm) Rated pressure 10 bar(3000psi) Internal leakage (maximum) less than psi Pilot ratio 3:1 Manifold sub-assembly Installation kit (includes cap screws, washers and o-rings) For detailed specifications refer to the PO1-10 data sheet on page G-36 model code is H. To order the manifold sub-assembly, without the two PO1 valves, but with integral shuttle valve order Functional Symbol 6,74 [.470] Port Sizes, SE10 rake SE4 88,14 [3.470] 7,16 [0.8] rake "" 63,5 [.500] "" ETON HYDRULIS, IN. Model Number "" "rake" "" 31,74 [1.50] 57,15 [.50] 100,84 [3.970] 1,7 [0.500] 4XØ 8,71 [0.343] 44,45 [1.750] 69,37 [.731] 19,53 [0.769] ETON Vickers Screw-in artridge Valves V-VLOV-M001-E1 une

32 Dual ross-over Relief Package for H&T Series Motors artridge valves & manifolds for spool valve motors Dual rossover Relief Valve ssembly This valve assembly provides motor overpressure protection in both directions of rotation, while supplying the return or lower pressure side of the motor with makeup oil. If closed center valving is used, an additional function is controlled braking. Typical applications are vehicle propulsion and motor work circuits in which pressure limiting is required. How to Order omplete pre-assembled packages are specified using the RV3-10 model code. Option must be RTINGS ND SPEIFITIONS Rated flow 76 L/min(0USgpm) Rated pressure 10 bar (3000psi) Internal leakage (maximum) less than 5 85% of nominal setting Manifold sub-assembly only Installation kit (includes cap screws, washers and o-rings) For detailed specifications refer to the RV3-10 data sheet on page E-1 selected for the cage seals, position 6 of the model code is H. To order the manifold separately, without the two RV3 cartridges, order the part number Functional Symbol Port Sizes, SE10 rake SE4 5,5 [.057] 4XØ 8,71 [0.343] 50,8 [.000] ETON HYDRULIS, IN. "" 4,13 [0.950] 88,14 [3.470] 65,0 [.560] "" 69,85 [.750] "" Model Number "" 4,13 [0.950] 44,45 [1.750] 6,74 [.470] 1,98 [0.078] 75,44 [.970] 1,98 [0.078] -3 ETON Vickers Screw-in artridge Valves V-VLOV-M001-E1 une 003

33 Dual ross-over Relief Package for 000 Series Disc Valve Motors artridge valves & manifolds for disc valve motors Dual rossover Relief Valve ssembly This valve assembly provides motor overpressure protection in both directions of rotation, while supplying the return or lower pressure side of the motor with makeup oil. If closed center valving is used, an additional function is controlled braking. Typical applications are vehicle propulsion and motor work circuits in which pressure limiting is required. Functional Symbol How to Order omplete pre-assembled packages are specified using the RV3-10 model code. Option must be selected for the cage seals, RTINGS ND SPEIFITIONS position 6 of the model code is K. To order the manifold separately, without the two RV3 cartridges, order Rated flow 76 L/min(0USgpm) Rated pressure 10 bar (3000psi) Internal leakage (maximum) less than 5 85% of nominal setting Manifold sub-assembly only Installation kit (includes cap screws, washers and o-rings) For detailed specifications refer to the RV3-10 data sheet on page E-14 Port Sizes, SE10 rake SE4 WRNING This manifold package may not be suitable for application with all 000 series motors - please check installation dimensions carefully. 5,5 [.057] 3XØ10,31 [0.406] "" 44,45 [1.750] ETON HYDRULIS, IN. Model Number "" "" 56,03 [.06] 8,55 [3.50] 100,84 [3.970] 6,35 "" [0.50] 53,85 [.10] 8,45 [1.10] 6,74 [.470] 1,98 [0.078] 88,14 [3.470] 1,98 [0.078] ETON Vickers Screw-in artridge Valves V-VLOV-M001-E1 une

34 Dual V Package for 000 Series Disc Valve Motors artridge valves & manifolds for disc valve motors Dual ounterbalance Valve ssembly When the motor is in a stationary, unpowered mode, this assembly will prevent excessive drift in either direction of rotation. It will also prevent motor overspeed when exposed to an overrunning load, and will control motor deceleration to a stop. shuttle within the assembly provides a pilot to release a parking or holding brake as either motor port is pressurized. Typical applications are swing drives, winch drives, and vehicle propulsion circuits. If the shuttle is not required the rake port may be plugged. Functional Symbol How to Order omplete pre-assembled packages are specified using the V*-10 model code, position 6 of the RTINGS ND SPEIFITIONS Rated flow 60L/min(15USgpm) Rated pressure 10 bar (3000 psi) Internal leakage (maximum) 5 drops/min 77% of crack pressure Pilot ratio 4:1 or 10:1 Manifold sub-assembly only Installation kit (includes cap screws, washers and o-rings) For detailed specifications refer to the V*-10 data sheet on page H-6 6,74 [.470] model code is K. To order the manifold subassembly, without the two V valves, but with Port Sizes, SE10 rake SE4 integral shuttle valve order WRNING This manifold package may not be suitable for application with all 000 series motors - please check installation dimensions carefully. rake 100,84 [3.970] 53,4 [.103] 57,15 [.50] ETON HYDRULIS, IN. Model Number "" "" 31,74 [1.50] 76,81 [3.04] 113,54 [4.470] "" "rake" 17,78 [0.700] "" 3XØ 10,31 [0.406] 50,8 [.000] 76,87 [3.07] 3,46 [0.94] -34 ETON Vickers Screw-in artridge Valves V-VLOV-M001-E1 une 003

35 Dual PO Package for 000 Series Disc Valve Motors artridge valves & manifolds for disc valve motors Dual Pilot Operated heck Valve ssembly When the motor is in a stationary, unpowered mode, this assembly will prevent excessive drift in either direction of rotation. lthough it not designed to modulate the flow of oil to or from the motor, it will also prevent motor runaway if an overrunning load exists in the powered mode. shuttle within the assembly provides a pilot to release a parking or holding brake as either motor port is pressurized. If the shuttle is not required the rake port may be plugged. How to Order omplete pre-assembled packages are specified using the PO1-10 model code, position 6 of the model code is K. To order the manifold subassembly, without the two PO1 valves, but with integral shuttle valve order RTINGS ND SPEIFITIONS Rated flow 60L/min(15USgpm) Rated pressure 10 bar(3000psi) Internal leakage (maximum) less than psi Pilot ratio 3:1 Manifold sub-assembly only Installation kit (includes cap screws, washers and o-rings) For detailed specifications refer to the PO1-10 data sheet on page G-36 Port Sizes, SE10 rake SE4 Functional Symbol 6,74 [.470] 100,84 [3.970] 7,16 [0.8] rake 57,15 [.50] ETON HYDRULIS, IN. Model Number "" "" 31,74 [1.50] 76,81 [3.04] 113,54 [4.470] "" "rake" 17,78 [0.700] "" 3XØ 10,31 [0.406] 50,8 [.000] 76,87 [3.07] 3,46 [0.94] ETON Vickers Screw-in artridge Valves V-VLOV-M001-E1 une

36 avity Plugs STNDRD PLUGS Note To block flow from between the ports in any unused standard cavity, in a housing or manifold. Order cavity plugs by part number. -**- avity Plugs SIZE SSY. NO. SEL KIT To fit una-n cavity ød Viton ,1 7,8 1,6/1, (0.36) (1.09) (0.498/0.496) ,9 31,7 15,8/15, (0.30) (1.5) (0.6/0.6) ,7 44,5 3,7/3, (0.74) (1.75) (.936/.934) ,7 44,5 8,5/8, (0.50) (1.75) (1.1/1.1) ,5 57, 36,4/36, (0.53) (.5) (1.43/1.43) Thread 1 D -**-3(S) avity Plugs Thread 3 1 D E SIZE SSY. NO. SEL KIT To fit una-n cavity D E Viton ,1 40,7 14,/14,0 15, (0.36) (1.60) (0.56/0.55) (0.63/0.61) S ,9 74, 17,4/17,4 19,0/18, (0.30) (1.86) (0.68/0.68) (0.74/0.74) ,0 15,8/15,7 17,4/17, (1.81) (0.6/0.6) (0.68/0.68) S ,7 57,7,1/, 1 3,7/3, (0.74) (.7) (0.874/0.87) (0.936/0.934) , (.64) S ,7 55,6 5,3/5,3 8,5/8, (0.50) (.18) (0.99/0.99) (1./1.) ,1 6,9/6,9 8,5/8, (,87) (1.06/1.06) (1./1.) S , ,3/33, 36,4/36, (0.53) (3.0) (1.31/1.30) (1.43/1.43) ,3/33, 36,4/36, (3.87) (1.31/1.30) (1.43/1.43) ETON Vickers Screw-in artridge Valves V-VLOV-M001-E1 une 003

37 avity Plugs -**-4 avity Plugs 4 3 Thread TO FIT SSY VITY SIZE D ØE ØF ØG NO , (0.87) hex. 8,6 54,6 1,6 14, 15, Torque (0.34) (,15) (0.49) (0.55) (0.6) Nm(5-30 lbf ft) -10-4(U) ,4 (1.0) hex. 7,9 61,9 15,8/15,7 17,4/17,3 19,0/18, Torque (0.31) (.43) (0.6/0.6) (0.68/0.68) (0.74/0.74) Nm (35-40 lbf ft) ,1 (1.50) hex. 1, ,3/5,3 6,9/6,9 8,5/8, Torque (0.50) (4.00) (0.99/0.99) (1.06/1.05) (1.1/1.1) Nm (80-90 lbf ft) ,6 (1.87) hex. 13,5 139,7 31,7/31,6 33,3/33, 36,4/36, Torque (0.53) (5.50) (1.4/1.4) (1.31/1.30) (1.43/1.43) Nm ( lbf ft) 1 D E F IMPORTNT The cartridges listed are complete with seals compatible with antiwear hydraulic oil. If cartridges are to be compatible with antiwear and phosphate ester, order cartridges by part number plus the appropriate Viton seal kit as listed in Spare parts. efore using the cartridge, change the seals to Viton. Special purpose cavity plugs Functional Symbols Filter cartridge plugs TO FIT VITY SIZE SSY. NO. SEL KIT (una-n) (Viton ) Screen fitted on cartridge, intended direction of flow is from port to 1 only. Maximum rated flow is 76 L/min (0 USgpm), maximum operating pressure is 350 bar (5000 psi) 1 Special 3 way cavity plugs Special 4 way cavity plugs 1 TO FIT VITY SIZE SSY. NO. SEL KIT (una-n) (Viton ) -10-3S (una-n) (Viton ) TO FIT VITY SIZE SSY. NO. SEL KIT (una-n) (Viton ) TO FIT VITY SIZE SSY. NO. SEL KIT (una-n) (Viton ) 3 4 ETON Vickers Screw-in artridge Valves V-VLOV-M001-E1 une

38 Orifice Discs lank Orifice Discs (Flat) lank Orifice Discs (Flat) lank Orifice Discs (Flat) lank Orifice Discs (Flat) Note For predrilled orifice discs, consult factory. n orifice disc is installed at the bottom of a standard cavity to create a local pressure drop in the flow to and from port 1 of the cartridge. Two series of discs are available according to the maximum pressure drop required: 1. Flat discs/maximum pressure drop/13,8 bar (00 psi).. onical discs/maximum pressure drop/10 bar (3000 psi). MX PRESSURE VITY DROP R SSY SIZES (PSI) Ø Ø NUMER -8-/4 13,8 (00) 1,45 (0.490) 1,7 (0.050) * /3/4 13,8 (00) 5,80 (0.6) 15,75 (0.60) 1,5 (0.060) * ,8 (00) 8,58 (1.15) 8,5 (1.13),03 (0.08) * ,8 (00) 6,97 (1.06) 6,9 (1.060),03 (0.08) * -16-3S/4 13,8 (00) 5,4 (1.00) 5,35 (0.998),03 (0.08) * *User to specify ± 0,05 (0.001) Ø lank Orifice Discs (onical) MX PRESSURE VITY DROP R SSY SIZES (PSI) Ø Ø Ø D E F NUMER -8-/4 10 (3000) 3,96 (0.156) 5,84 (0.30) 1,45 (0.490) 1,90 (0.075) 3,05 (0.10) (3000) 3,96 (0.156) 5,84 (0.30) 14,05 (0.553) 1,90 (0.075) 3,05 (0.10) (3000) 5,54 (0.18) 6,35 (0.50) 15,80 (0.6) 1,14 (0.045) 3,56 (0.140) ,75 (0.60) (3000) 7,14 (0.81) 3,70 (0.933),41 (0.095) 3,56 (0.140) 1,14 (0.045) ,65 (0.931) Orifice diameter ± 0,05 (0.001) To abut port 1 of cartridge D F D E -38 ETON Vickers Screw-in artridge Valves V-VLOV-M001-E1 une 003

39 Orifice Disc Sizing Guide (mm) Select required orifice diameter using the graph below Flow - L/min dp - (psi) Note This chart is calculated at 1.8 cst and 49 for ISO VG3 fluid (DTE-4), values will change with viscosity changes dp - (bar) Note To calculate orifice diameter at other flows and differential pressures use the following formula: D=1.350 x (Q/( dp) Note where D= orifice diameter in millimeters; Q= flow in liters per minute; dp= differential pressure across orifice in R Flow - USgpm ETON Vickers Screw-in artridge Valves V-VLOV-M001-E1 une