atalog /US Index Vacuum ups Product Selection Technical Lifting orces, up iameters, Material Specifications 6-9 P lat Precision molded single li
|
|
- Ada Adams
- 6 years ago
- Views:
Transcription
1 Vacuum ups Section 3 Parker annifin orporation ivision
2 atalog /US Index Vacuum ups Product Selection Technical Lifting orces, up iameters, Material Specifications 6-9 P lat Precision molded single lip flat cup for smooth or slightly curved surfaces. Low profile design makes flat pads ideal for fast response. up Sizes: 1mm to 200mm P5V-S lat Precision molded double lip flat cup for slightly curved surfaces. ouble lip for additional security. If outside lip bends and looses its seal, the inner lip remains sealed. Outer ribs prevent the cup lip from being cut. up Sizes: 50mm to 300mm P ellows Versatile bellows cup design provides a flexible sealing lip for products with irregular, smooth, curved surfaces, and flexible products. up Sizes: 10mm to 150mm PJ Short ellows Versatile bellows cup design provides a flexible sealing lip for products with irregular, smooth, curved surfaces, and slightly flexible products. Shorter stroke provides fast response. up Sizes: 6mm to 80mm P Multiple ellows Versatile bellows cup design provides a flexible sealing lip for products with irregular, smooth, or curved surfaces. 2 1/2 bellows design minimizes contact pressure applied to products. up Sizes: 5mm to 90mm PK utomotive Versatile cup design with grooves extending to the outer diameter and different profiles for flexible products with smooth, oily surfaces. up Sizes: 60mm to 110mm 4 Parker annifin orporation ivision
3 atalog /US Index Vacuum ups Product Selection PU lat Swivel 30 swivel single lip flat cup for smooth surfaces, slightly curved surfaces, and flexible products. Rigid stem or level compensator provides good stability for horizontal lift. up Sizes: 10mm to 200mm PO Vacuum rooves nti-slip flat cup with grooves extending to the outer diameter to increase vacuum flow area. Increased friction resists slipping of product during transfer. up Sizes: 20mm to 40mm P Ring ups Some of the more popular pads for the Industry. igh temperature and soft durometer make these pads gentle and durable. up Sizes: 20mm to 46mm P Sponge Sponge cup for workpieces having irregular or uneven surfaces. The 20-durometer-sponge material conforms to the product allowing the desired vacuum level to be achieved. up Sizes: 4mm to 15mm P oil, Paper, ilm These cups have an ultra thin edge that creates the vacuum seal by conforming to the shape of the product. The complete foot pattern to the center of the cup prevents the vacuum from deforming or puckering thin, flexible products. up Sizes: 10mm to 50mm dapters & Screws SPP adapter fittings and cup screws Parker annifin orporation ivision
4 atalog /US up Selection Selecting the Proper Vacuum up UTION Selecting the type of vacuum cup, material, and size suitable for an application is important to the overall vacuum system. alculating the forces involved for each application is recommended to determine the vacuum cup size. It should be noted that these calculations are basic theoretical guidelines and each application must be tested for actual results. With all vacuum applications, certain practical assumptions concerning cup materials, environmental conditions, and product characteristics to name a few, may not be consistent with the performance. gain, the user should determine the efficiency, performance, and safety factor of the cup selection. alculating Pad iameter and orces Mass The term mass is a quantity of matter and its ability to resist motion when acted on by an external force. The magnitude of an object is represented as a certain number of kilograms (kg) and is symbolized as m. The easiest way to determine the mass of an object is to measure the weight with a scale within the earth s gravitational field (ag = 9.81m/sec 2 ). Likewise, outside of any gravitational field, a mass could potentially be weightless. orces or vacuum applications, force is a vector quantity in a defined direction either horizontal or vertical. The standard international unit of force is measured in Newtons (N) which is the equivalent of (kgm/sec 2 ). The force can be calculated by measuring the effect of a change in acceleration on a mass. Newtons Law: (N) = mass(kg) x ag(m/sec 2 ) onsider an object with a mass of 10kg. The gravitational force on this object would be: (N) = 10kg x 9.81m/sec 2 = 98.1 N cceleration cceleration is the change in velocity of a moving object. cceleration is a vector, a directional quantity expressed in units of meters per second squared (m/sec 2 ) and symbolized as a. To explain the magnitude of acceleration consider an object with a change in velocity of 2 meters per second (m/sec) over a 4 second time frame. The acceleration can be calculated with: a = velocity a = 6m/sec a = 3m/sec 2 time 2 sec This is considered an average acceleration. oefficient of riction ertain values for coefficient of friction should be taken into consideration when calculating the combined forces in motion. ctual values between suction cups and surfaces are difficult to determine. Therefore, coefficient of friction values from published charts, should be used as a reference to adjust the safety factors accordingly. Vacuum ups Technical Information Lifting orces When calculating lifting forces, safety factors of 2 for horizontal lifts and 4 for vertical lifts are minimum values. pplications with irregular shapes, difficult surfaces, and ackward motions will require increased safety factors. : orizontal Lift V: Vertical Lift orizontal Lifting orce pply Newtons Law to calculate the force on a 10kg mass with a change in acceleration of 3m/sec 2 and a safety factor of 2. (N) = mass(kg) x (ag+ a) x S (N) = 10kg x (9.81m/sec 2 +3m/sec 2 ) x 2 = N 10kg 10kg 3m/sec 2 Vertical Lifting orce pply Newtons Law to calculate the force on a 10kg mass with a dry surface, a change in acceleration of 3m/sec 2 and a safety factor of 4. V(N) = mass(kg) x (ag+ a) x Sv V(N) = 10kg x (9.81m/sec 2 +3m/sec 2 ) x 4 V = N V 10kg 3m/sec 2 ombined Vertical Lift and orizontal Motion alculate the force on a 10kg mass with a dry surface, a change in acceleration of 3m/sec 2, and a change in travel acceleration of 2m/sec 2. M(N) = V M(N) = [(10kg x 2m/sec 2 ) x 4] 2 + [10kg x (9.81m/sec 2 + 3m/sec 2 ) x 2] 2 M(N) = (80kgm/sec 2 ) 2 + [256kgm/sec 2 ] 2 M(N) = 6400kgm/sec ,536kgm/sec 2 M = N 3m/sec 2 2m/sec 2 6 Parker annifin orporation ivision
5 atalog /US Lift apacity nalyze the orces Using the previous examples, consider an application where 4 cups have been selected to transfer the product. Take the orizontal Lifting orce () of N and divide by the number of cups (4) to obtain the individual force for each cup (N) = N / up 4 Refering to the chart below, at 60% vacuum, select a force greater than N. The appropriate selection is a 40mm diameter cup which has a theoretical lifting force of 76.9 N. The same calculation can be applied to the Vertical Lifting orce and the orces in Motion examples to determine the cup diameter. To convert Pounds (Lbf) to Newton (N), multiply Lbf x 4.4. Vacuum ups Technical Information Theoretical Lifting orce Per up lbf (N) alculate the iameter of the up alculate the cup diameter for horizontal lift at 60% of full vacuum using the information from the previous page. m (a g + a) x S (mm) = iameter of up = 35.7 m (kg) = Mass Pv x n ag = 9.81m/sec 2 a = Motion cceleration S = Safety actor 10 ( ) x 2 Pv (kpa) = Operating Vacuum Pressure = x 4 n = Number of ups = mm Refering to the chart below, at 60% vacuum, select a cup diameter equal to or greater than 37mm. The appropriate selection is a 40mm diameter cup which has a theoretical lifting force of 76.9 N. Vacuum Level up 3 in hg 6 in hg 9 in hg 12in hg 15 in hg 18 in hg 21 in hg 24 in hg 27 in hg -1.5 PSI -3 PSI -4.5 PSI -6 PSI -7.5 PSI -9 PSI PSI -12 PSI PSI iameter rea 10.2 kpa 20.3 kpa 30.5 kpa 40.6 kpa 50.8 kpa 61 kpa 71.1 kpa 81.3 kpa 91.4 kpa mm cm 2 10% 20% 30% 40% 50% 60% 70% 80% 90% (0.01) (0.02) (0.02) (0.03) (0.04) (0.05) (0.06) (0.07) (0.07) (0.03) (0.06) (0.10) (0.13) (0.16) (0.19) (0.22) (0.25) (0.28) (0.10) (0.20) (0.29) (0.39) (0.49) (0.59) (0.69) (0.78) (0.88) (0.20) (0.40) (0.60) (0.80) (1.00) (1.20) (1.40) (1.60) (1.80) (0.29) (0.58) (0.87) (1.20) (1.40) (1.70) (2.00) (2.30) (2.60) (0.39) (0.78) (1.18) (1.60) (2.00) (2.40) (2.70) (3.10) (3.50) (0.52) (1.02) (1.54) (2.00) (2.60) (3.10) (3.60) (4.10) (4.60) (0.80) (1.60) (2.40) (3.20) (4.00) (4.80) (5.60) (6.40) (7.20) (1.80) (3.60) (5.41) (7.20) (9.00) (10.8) (12.6) (14.4) (16.2) (2.60) (5.20) (7.79) (10.4) (13.0) (15.6) (18.1) (20.8) (23.3) (3.20) (6.40) (9.60) (12.8) (16.0) (19.2) (22.4) (25.6) (28.8) (5.00) (10.0) (15.0) (20.0) (25.0) (30.0) (35.0) (40.0) (45.0) (7.20) (14.4) (21.6) (28.8) (36.0) (43.2) (50.4) (57.6) (64.8) (9.80) (19.6) (29.4) (39.2) (49.0) (58.9) (68.6) (78.5) (88.2) (12.9) (25.6) (38.5) (51.2) (64.0) (76.9) (89.6) (103) (115) (20.1) (40.0) (60.1) (80.0) (100) (120) (140) (160) (180) (28.9) (57.6) (86.5) (115) (144) (173) (202) (231) (259) (45.2) (90.0) (135) (180) (225) (270) (315) (360) (405) (51.4) (102) (154) (205) (256) (308) (359) (410) (461) (65.1) (130) (195) (259) (324) (389) (454) (519) (583) (72.5) (144) (217) (289) (361) (434) (506) (578) (650) (97.2) (194) (291) (387) (484) (581) (678) (775) (871) (116) (230) (346) (461) (576) (692) (807) (922) (1037) (181) (360) (541) (720) (900) (1081) (1260) (1441) (1620) (321) (640) (961) (1279) (1601) (1922) (2241) (2562) (2880) 7 Parker annifin orporation ivision
6 atalog /US Lift apacities Specifications up material should be considered for temperature resistance, chemical resistance, oil resistance, abrasion resistance, markless properties, and electrical properties. Suction up Material Vacuum ups Technical Information NR NR R SI SI U KM S Z Nitrile Silicone louro Silicone Nitrile hloroprene Silicone Urethane Markless S* S* Rubber igh Temp Operating Temperature ( ) to +120 to +120 to +140 to +250 to +250 to +120 to +230 to +300 to +230 lack / lack / lack / lack / olor lack reen White lue rey lue ot Red ot White ot Yellow ot ardness, 55 ±5 70 ±5 55 ±5 55 ±5 55 ±5 55 ±5 70 ±5 55 ±5 70 ±5 Shore ( Sh) lectrical (Ωm) to 1000 to 1000 Wear Tear Strength ging Ozone asoline Oil cid lkali hemical Mechanical = excellent; = very good; = good; = medium; = poor; = not recommended * S: lectric Static issipative Material 8 Parker annifin orporation ivision
7 atalog /US Symbols Index of Vacuum omponent Symbols These Symbols will be located in each cup section as a guide for cup usage. Symbol Suction up Icons escription lat Surface, Thin Section lat Surface, ny Section Soft Porous Material, Thin Section Soft Porous Material, ny Section Slightly owed Surface, Thin Section Slightly owed Surface, ny Section owed Surface, Thin Section owed Surface, ny Section Soft Material Metal Sheet andling orrugated Sheet andling Vacuum ups Technical Information Symbol Suction up Icons escription ifferences In eights and Levels Vertical Lift Not or Vertical Lift Rough and / or brasive Surfaces Thin or Narrow Item andling Oil Resistant igh Lifting orce Vertical Lifting orce orizontal Lifting orce 9 Parker annifin orporation ivision
8 atalog /US eatures P lat Vacuum ups P Series Vacuum ups Precision molded single lip flat cup for smooth or slightly curved surfaces. PTM Series Male Thread onnector Simple male connection for low profile positions secured to a plate or bracket. UN, NPT,, metric threads. Internal hex for easy assembly. itting Material: luminum. PT Series emale Thread onnector Simple female connection for low profile positions secured to a plate or bracket. NPS, threads. Internal hex for easy assembly. itting Material: luminum. Vacuum ups P Vacuum ups eatures Universal lat esign for Most Smooth Surface pplications Stable Vertical / orizontal Lift Strong Low Profile esign for ast Response Needed for Short ycles 1mm to 200mm iameters ottom leats on 60 to 200mm pplications xceptional for any smooth flat or surface that will benefit from stability and fast response of the cup design. This is a multi-versatile and multi-industry cup. Typical applications could be chip mounting, electrical components, semiconductor chips, glass, injection mold, sheet metal, press transfer, fixtures, woodworking. PTK Series arbed ulkhead Top stem connectors secured with jam nuts and allow tubing connections at the top side. Nickel plated brass materials. PYK Series 90 arbed dapter Side stem connectors allow you to secure the stem with a bolt thru a plate or L bracket to allow the tube connection from the side port. Nickel plated brass materials. PTYS Series ulkhead Level ompensator 303 stainless steel construction secured with jam nuts. Spring biased compensators can absorb impacts of down-strokes and adjust for different levels of pick up points. 303 stainless corrosion resistant materials with drymet bushings increases the strength and life. 10 Parker annifin orporation ivision
9 atalog /US Ordering Information Model Number Index (ups Only) (old Items are Stocked) Specifications Suction up Material up iameter (mm) 1 (1) 25 (25) 1.5 (1.5) 30 (30) 2 (2) 35 (35) 3.5 (3.5) 40 (40) 5 (5) 50 (50) 6 (6) 60 (60) 8 (8) 80 (80) 10 (10) 95 (95) 15* (15) 120 (120) 15** (15) 150 (150) 20* (20) 200 (200) 20** (20) * vailable for PTK & PYK up ssemblies Only. ** vailable for PTM, PT & PTYS up ssemblies Only. Vacuum ups P Vacuum ups P NR up Material Stocked NR Nitrile Rubber SI Silicone vailable (onsult actory) U Urethane NR Nitrile S R hloroprene SI Silicone S KM louro Rubber S igh Temp Z Markless Note: 60 thru 200mm cups have cup cleats. NR NR R SI SI U KM S Z Nitrile Silicone louro Silicone Nitrile hloroprene Silicone Urethane Markless S* S* Rubber igh Temp Operating Temperature ( ) to +120 to +120 to +140 to +250 to +250 to +120 to +230 to +300 to +230 lack / lack / lack / lack / olor lack reen White lue rey lue ot Red ot White ot Yellow ot ardness, 55 ±5 70 ±5 55 ±5 55 ±5 55 ±5 55 ±5 70 ±5 55 ±5 70 ±5 Shore ( Sh) lectrical (Ωm) to 1000 to 1000 Wear Tear Strength ging Ozone asoline Oil cid lkali hemical Mechanical = excellent; = very good; = good; = medium; = poor; = not recommended * S: lectric Static issipative Material 11 Parker annifin orporation ivision
10 atalog /US pplications & Technical ata pplication uide lat - Smooth Surface Main ata for lat P ups Volume V Vacuum ups P Vacuum ups up eflection S Radius Lifting (N) up Radius Model up iameter rea Volume (V) eflection (S) (R) Number cm 2 Liters mm mm P-1-*.04 (1) P-1.5-*.06 (1.5) P-2-*.08 (2) P-3.5-*.12 (3) P-5-*.20 (5) P-6-*.24 (6) P-8-*.31 (8) P-10-*.39 (10) P-15-*.59 (15) P-15-*.59 (15) P-20-*.79 (20) P-20-*.79 (20) P-25-*.98 (25) P-30-* 1.18 (30) P-35-* 1.38 (35) P-40-* 1.57 (40) P-50-* 1.97 (50) P-60-* 2.36 (60) P-80-* 3.15 (80) P-95-* 3.74 (95) P-120-* 4.72 (120) P-150-* 5.91 (150) P-200-* 7.87 (200) * up Material Ø 120/200 Only Products With Smooth Surfaces Products With Minimum lex Products That Will Not Permanently eform R 12 Parker annifin orporation ivision
11 atalog /US imensions imensions P-1 P-1.5 P-2 P-3.5 P-5 P-15 P-60 thru P-95 Model Number J J Ø Ø Ø Ø ØJ P-1-*.04 (1).03 (.8).05 (1.2).06 (1.6) P-1.5-*.06 (1.5).05 (1.2).07 (1.8).10 (2.5) P-2-*.08 (2).08 (2).05 (1.2).16 (4).16 (4).02 (.5).10 (2.5).06 (1.5).12 (3) P-3.5-*.14 (3.5).08 (2).05 (1.2).16 (4).16 (4).02 (.5).10 (2.5).06 (1.5).12 (3) P-5-*.20 (5).16 (4).06 (1.4).30 (7.5).26 (6.5).03 (.8).16 (4).08 (2).24 (6) P-6-*.24 (6).16 (4).08 (2).30 (7.5).26 (6.5).03 (.8).16 (4).08 (2).24 (6) P-8-*.31 (8).16 (4).08 (2).31 (8).28 (7).05 (1.2).16 (4).08 (2).24 (6) P-10-*.39 (10).16 (4).08 (2).33 (8.5).30 (7.5).06 (1.5).16 (4).08 (2).24 (6) P-15-*.59 (15).31 (7.8).47 (12).31 (8).07 (1.9) P-15-*.59 (15).16 (4).08 (2).35 (9).31 (8).08 (2).16 (4).08 (2).24 (6) P-20-*.79 (20).18 (4.6).43 (11).59 (15).39 (10).09 (2.3).18 (4.5) P-20-*.79 (20).24 (6).43 (11).59 (15).49 (12.5).09 (2.3).28 (7) P-25-*.98 (25).24 (6).43 (11).63 (16).55 (14).12 (3).28 (7) P-30-* 1.18 (30).24 (6).43 (11).55 (14).47 (12).08 (2).28 (7) P-35-* 1.38 (35).24 (6).43 (11).83 (21).55 (14).12 (3).28 (7) P-40-* 1.57 (40).24 (6).43 (11).94 (24).55 (14).16 (4).28 (7) P-50-* 1.97(50).31 (8).79 (20) 1.06 (27).59 (15).14 (3.5).28 (7) P-60-* 2.36 (60) M10x (12.5).73 (18.5).20 (5).10 (2.5) P-80-* 3.15 (80) M10x (12.5).81 (20.5).24 (6).10 (2.5) P-95-* 3.74 (95) M10x (12.5).83 (21).24 (6).10 (2.5) P-120-* 4.72 (120).55 (14).55 (14).79 (20) 1.00 (25.5).24 (6) 4xØ8.7xØ (1.5) P-150-* 5.91 (150).51(13).55 (14).79 (20) 1.28 (32.5).35 (9) 4xØ8.7xØ (1.5) P-200-* 7.87 (200).51 (13).47 (12).79 (20) 1.48 (37.5).51 (13) 4xØ8.7xØ (1.5) * up Material (Revised 10/8/04) P-120 thru P-200 Vacuum ups P Vacuum ups P-15 thru P-40 P-50 ia. Typ. 4 Places 4 olt Pattern 40mm ia. 13 Parker annifin orporation ivision
12 atalog /US Ordering Information PTM Vacuum up ssemblies Installation Note: When installing cup assemblies, use a sealant material to secure the assembly and prevent vacuum leakage. Tube I.. listed below is a recommended minimum value, for that cup range, to optimize response time of the system. Your requirements may vary. Mounting Thread Male Thread itting for P ups Model Number Index (old Items are Stocked) up iameter Mounting Mounting TM itting Included in Kit (mm) Thread ode Thread Part Number Min. Tube I 1 M3 M3x0.5 Male TM-1-M3.060 (1.5) 1.5 M3 M3x0.5 Male TM-1.5-M3.060 (1.5) 2, 3.5 M5 M5x0.8 Male TM-2-M5.098 (2.5) 5, 6, 8, 10, 15 Tube I.. 20, 25, 30, 35, 40 Vacuum ups PTM Vacuum up ssemblies PTM NR - M5 up iameter (mm) 1 (1) 20 (20) 1.5 (1.5) 25 (25) 2 (2) 30 (30) 3.5 (3.5) 35 (35) 5 (5) 40 (40) 6 (6) 50 (50) 8 (8) 60 (60) 10 (10) 80 (80) 15 (15) 95 (95) (old Items are Stocked) M5 M5x0.8 Male TM-5-M5 1 1/8 SPP Male TM-5-1 N1 1/8 NPT Male TM-20-N1 1 1/8 SPP Male TM /4 SPP Male TM-20-2 M10 M10 x 1.25 Male TM-20-M10 N1 1/8 NPT Male TM-50-N1.157 (4).157 (4) /8 SPP Male TM (4) 2 1/4 SPP Male TM-50-2 N2 1/4 NPT Male TM-60-N2 60, 80, /4 SPP Male TM (6.35) M10 M10x1.25 Male TM-60-M10 up Material Stocked Mounting Thread NR Nitrile M3 M3 Rubber M5 M5 SI Silicone N1 1/8 NPT vailable 1 1/8 SPP (onsult actory) M10 M10 U Urethane N2 1/4 NPT NR Nitrile S 2 1/4 SPP R SI hloroprene Silicone See hart elow S KM louro Rubber S igh Temp Z Markless 14 Parker annifin orporation ivision
13 atalog /US imensions imensions PTM-1 and PTM-1.5 PTM-20 thru PTM-50 SW5 20 thru 40: 1/2" 50: 9/16" (Revised 01/10/05) M3 N1: 1/8 NPT 1: 1/8 SPP M10: 10x1.25 2: 1/4 SPP Vacuum ups PTM Vacuum up ssemblies PTM-2 thru PTM-15 M5: SW8 1: SW13 (5 thru 15 Only) PTM-60 thru PTM-95 M5:.14 (3.5) 1:.20 (.5) (5 thru 15 Only) Model Ø Number (M3) (M5) (N1 / 1) (M10 / 2) (N2) PTM-1-*-.04 (1).14 (3.6).12 (3).08 (2).003 (0.1) PTM-1.5-*-.06 (1.5).14 (4.5).12 (3).08 (2).003 (0.1) PTM-2-*-.08 (2).30 (7.5).18 (4.5).14 (3.5).20 (5) PTM-3.5-*-.14 (3.5).30 (7.5).18 (4.5).14 (3.5).20 (5) PTM-5-*-.20 (5).39 (10).18 (4.5).31 (8) See wg..31 (8) PTM-6-*-.24 (6).39 (10).18 (4.5).31 (8) See wg..31 (8) PTM-8-*-.31 (8).41 (10.5).18 (4.5).31 (8) See wg..05 (1.2) PTM-10-*-.39 (10).43 (11).18 (4.5).31 (8) See wg..06 (1.5) PTM-15-*-.59 (15).45 (11.5).18 (4.5).31 (8) See wg..08 (2) PTM-20-*-.79 (20).69 (17.5).31 (8).39 (10).20 (5).10 (2.5) PTM-25-*-.98 (25).75 (19).31 (8).39 (10).20 (5).12 (3) PTM-30-* (30).67 (17).31 (8).39 (10).20 (5).08 (2) PTM-35-* (35).75 (19).31 (8).39 (10).20 (5).12 (3) PTM-40-* (40).75 (19).31 (8).39 (10).20 (5).14 (3.5) PTM-50-* (50).79 (20).31 (8).39 (10).20 (5).16 (4) PTM-60-* (60).90 (23).39 (10).59 (15).28 (7).20 (5) PTM-80-* (80).98 (25).39 (10) 59 (15).28 (7).24 (6) PTM-95-* (95) 1.00 (25.5).39 (10) 59 (15).28 (7).24 (6) * up Material Thread Size 9/16" M5: M5 1: 1/8" SPP (5 thru 15 Only) N2: 1/4 NPT 2: 1/4 SPP M10: 10x Parker annifin orporation ivision
14 atalog /US Ordering Information PT Vacuum up ssemblies Installation Note: When installing cup assemblies, use a sealant material to secure the assembly and prevent vacuum leakage. Tube I.. listed below is a recommended minimum value, for that cup range, to optimize response time of the system. Your requirements may vary. emale Thread itting for P ups Vacuum ups PT Vacuum up ssemblies up iameter (mm) 5 (5) 40 (40) 6 (6) 50 (50) 8 (8) 60 (60) 10 (10) 80 (80) 15 (15) 95 (95) 20 (20) 120 (120) 25 (25) 150 (150) 30 (30) 200 (200) 35 (35) up iameter Mounting Mounting T itting Included in Kit (mm) Thread ode Thread Part Number Min. Tube I 5, 6, 8, 10, 15 M5 M5x0.8 emale T-5-M5.157 (4) N1 1/8 NPT emale T-20-N1 20, 25, 30, 35, /8 SPP emale T (4) 2 1/4 SPP emale T-20-2 N1 1/8 NPT emale T-50-N /8 SPP emale T (4) 60, 80, , 150, 200 Pipe I.. Mounting Thread Mounting Thread Model Number Index (old Items are Stocked) PT NR - M5 Tube I.. (old Items are Stocked) 2 1/4 SPP emale T-50-2 N2 1/4 NPT emale T-60-N2 2 1/4 SPP emale T-60-2 N4 1/2 NPT emale T-120-N4 4 1/2 SPP emale T up Material Stocked Mounting Thread NR Nitrile M5 M5 Rubber N1 1/8 NPT SI Silicone 1 1/8 SPP vailable M10 M10 (onsult actory) N2 1/4 NPT U Urethane 2 1/4 SPP NR Nitrile S N4 1/2 NPT R hloroprene 4 1/2 SPP SI Silicone See hart S elow KM louro Rubber S igh Temp Z Markless.25 (6.35).312 (8) 16 Parker annifin orporation ivision
15 atalog /US (Revised 10/8/04) imensions imensions PT-5 thru PT-15 PT-60 thru PT-95 9/16" M5x0.8 N2: 1/4 NPT 2: 1/4 SPP Vacuum ups PT Vacuum up ssemblies PT-120 thru PT-200 Model Number Ø PT-5-*-.20 (5).57 (14.5).03 (.8) PT-6-*-.24 (6).57 (14.5).03 (.8) PT-8-*-.31 (8).59 (15).05 (1.2) PT-10-*-.39 (10).57 (14.5).06 (1.5) PT-15-*-.59 (15).63 (16).08 (2) PT-20-*-.79 (20) 1.04 (26.5).10 (2.5) PT-25-*-.98 (25) 1.10 (28).12 (3) PT-30-* (30) 1.02 (26).08 (2) PT-35-* (35) 1.10 (28).12 (3) PT-40-* (40) 1.10 (28).16 (4) PT-50-* (50) 1.14 (29) 16 (4) PT-60-* (60) 1.40 (35.5).20 (5) PT-80-* (80) 1.48 (37.5).24 (6) PT-95-* (95) 1.50 (38).24 (6) PT-120-* (120) 1.83 (46.5).94 (24).51 (13).24 (6) PT-150-* (150) 2.11 (53.5).94 (24).51 (13).35 (9) PT-200-* (200) 2.30 (58.5).94 (24).51 (13).51 (13) * up Material Thread size PT-20 thru PT thru 40: 1/2" 50: 9/16" 2.24 (57) O (48) cross lats N4: 1/2 NPT 4: 1/2 SPP M8 x 1.25 Mtg. Screws on 40mm ia. enterline N1: 1/8 NPT 1: 1/8 SPP 2: 1/4 SPP 1/8 NPT or 1/8 SPP 17 Parker annifin orporation ivision
16 atalog /US Ordering Information PTK Vacuum up ssemblies Installation Note: When installing cup assemblies, use a sealant material to secure the assembly and prevent vacuum leakage. Tube I.. listed below is a recommended minimum value, for that cup range, to optimize response time of the system. Your requirements may vary. Mounting Thread Tube I.. up Screw arbed ulkhead for P ups Vacuum ups PTK Vacuum up ssemblies Model Number Index (old Items are Stocked) PTK NR - up iameter (mm) 2 (2) 25 (25) 3.5 (3.5) 30 (30) 5 (5) 35 (35) 6 (6) 40 (40) 8 (8) 50 (50) 10 (10) 60 (60) 15 (15) 80 (80) 20 (20) 95 (95) up iameter Vacuum Port TK itting Mounting Included in Kit (mm) ode Thread Part Number up Screw Only Thread Tube I (old Items are Stocked) up Material Stocked NR Nitrile Rubber SI Silicone vailable (onsult actory) U Urethane NR Nitrile S R hloroprene SI Silicone S KM louro Rubber S igh Temp Z Markless Vacuum Port lank arb N1 1/8 NPT 1 1/8 SPP R1 1/8 SPT See hart elow 2, 3.5 lank arb TK-2 N/ M5x0.5 Male.11 (2.5) 5, 6, 8, 10 lank arb TK-5 N/ M9x1.0 Male.157 (4) 15 lank arb YK-15 P-15-M5 M8x1.25 Male.157 (4) 20 lank arb YK-20 P-20-M5 M8x1.25 Male.157 (4) 25, 30, 35, 40 lank arb YK-25 P-25/40-M6 M10x1.5 Male.157 (4) 50 lank arb YK-50 P-50-M8 M10x1.5 Male.157 (4) N1 1/8 NPT TK-60-N1 N/ M16x1.5 Male N/ 60, 80, /8 SPP TK-60-1 N/ M16x1.5 Male N/ R1 1/8 SPT TK-60-R1 N/ M16x1.5 Male N/ 18 Parker annifin orporation ivision
17 atalog /US imensions imensions PTK-2 thru PTK (2) PTK-15 thru PTK (5).197 ia. Ø (5) M8x1.25 SW ia. Ø (5.5) 2 Places.39 (10).098 ia. Ø (2.5) M5 SW7.79 (20).118 ia. Ø (3).047 ia. Ø (1.2) PTK-25 thru PTK ia. Ø (5) M10x1.5 M5x0.8 SW14 Vacuum ups PTK Vacuum up ssemblies PTK-5 thru PTK ia. Ø (5) M9 SW ia. Ø (2.5) Model Wt Ø Number oz. (g) PTK-2-*.08 (2).93 (23.5).33 (8.5).43 (11).02 (.5).28 (8) PTK-3.5-*.14 (3.5).93 (23.5).33 (8.5).43 (11).02 (.5).28 (8) PTK-5-*.20 (5) 1.20 (30.5).39 (10).55 (14).03 (.8).61 (15.5).12 (3).39 (11) PTK-6-*.24 (6) 1.20 (30.5).39 (10).55 (14).03 (.8).61 (15.5).12 (3).39 (11) PTK-8-*.31 (8) 1.22 (31).39 (10).55 (14).05 (1.2).61 (15.5).12 (3).39 (11) PTK-10-*.39 (10) 1.81 (46).63 (16).88 (22.5).06 (1.5).61 (15.5).12 (3).53 (15) PTK-15-*.59 (15) 1.81 (46).63 (16).86 (22).07(1.9).59 (15).12 (3).71 (20) PTK-20-*.79 (20) 1.89 (48).63 (16).86 (22).09 (2.3).59 (15).20 (5).71 (20) PTK-25-*.98 (25) 2.44 (62).63 (16) 1.26 (32).12 (3).71 (20).20 (5) 1.41 (40) PTK-30-* 1.18 (30) 2.36 (60).63 (16) 1.26 (32).08 (2).71 (20).20 (5) 1.41 (40) PTK-35-* 1.38 (35) 2.44 (62).63 (16) 1.26 (32).12 (3).71 (20).20 (5) 1.41 (40) PTK-40-* 1.57 (40) 2.44 (62).63 (16) 1.26 (32).14 (3.5).71 (20).20 (5) 1.41 (40) PTK-50-* 1.97 (50) 2.48 (63).63 (16) 1.26 (32).16 (4).71 (20).20 (5) 1.77 (50) PTK-60-* (60) 2.30 (58.5) 1.67 (42.5).20 (5).79 (20).24 (6) 4.59 (130) PTK-80-* (80) 2.38 (60.5) 1.67 (42.5).24 (6).79 (20).24 (6) 6.00 (170) PTK-95-* (95) 2.40 (61) 1.67 (42.5).24 (6).79 (20).24 (6) 7.77 (220) * up Material Vacuum Port.118 ia. Ø (3) PTK-60 thru PTK-95 M16x1.5 SW21 N1: 1/8 NPT 1: 1/8 SPP R1: 1/8 SPT 19 Parker annifin orporation ivision
18 atalog /US Ordering Information PYK Vacuum up ssemblies Installation Note: When installing cup assemblies, use a sealant material to secure the assembly and prevent vacuum leakage. Tube I.. listed below is a recommended minimum value, for that cup range, to optimize response time of the system. Your requirements may vary. Mounting Thread Tube I.. up Screw 90 arbed dapter for P ups Vacuum ups PYK Vacuum up ssemblies Model Number Index (old Items are Stocked) PYK NR - up iameter (mm) 2 (2) 35 (35) 3.5 (3.5) 40 (40) 5 (5) 50 (50) 6 (6) 60 (60) 8 (8) 80 (80) 10 (10) 95 (95) 15 (15) 120 (120) 20 (20) 150 (150) 25 (25) 200 (200) 30 (30) Vacuum Port lank arb N1 1/8 NPT 1 1/8 SPP R1 1/8 SPT See hart elow up iameter Vacuum Port YK itting Mounting Included in Kit (mm) ode Thread Part Number up Screw Only Thread Tube I 2, 3.5 lank arb YK-2 N/ M3x0.5 emale.078 (2) 5, 6, 8, 10 lank arb YK-5 N/ M4x0.7 emale.157 (4) 15 lank arb YK-15 P-15-M5 M4x0.7 emale.157 (4) 20 lank arb YK-20 P-20-M5 M4x0.7 emale.157 (4) 25, 30, 35, 40 lank arb YK-25 P-25/40-M6 M6x1.0 emale.157 (4) 50 lank arb YK-50 P-50-M8 M6x1.0 emale.157 (4) 60, 80, 95 N1 1/8 NPT 1 1/8 SPP R1 1/8 SPT (old Items are Stocked) up Material Stocked NR Nitrile Rubber SI Silicone vailable (onsult actory) U Urethane NR Nitrile S R hloroprene SI Silicone S KM louro Rubber S igh Temp Z Markless YK-60-N1 N/ M8x1.25 emale N/ YK-60-1 N/ M8x1.25 emale N/ YK-60-R1 N/ M8x1.25 emale N/ N1 1/8 NPT YK-120-N1 N/ M16x1.5 emale N/ 120, 150, /8 SPP YK N/ M16x1.5 emale N/ R1 1/8 SPT YK-120-R1 N/ M16x1.5 emale N/ 20 Parker annifin orporation ivision
19 atalog /US (Revised 10/8/04) imensions imensions PYK-2 thru PYK ia. Ø (2.5).047 ia. Ø (1.2) PYK-25 thru PYK ia. Ø (5).118 ia. Ø (3) M3x0.5 M6x1.0 PYK-5 thru PYK ia. Ø (5).118 ia. Ø (3) PYK-60 thru PYK-95 N1: 1/8 NPT 1: 1/8 SPP R1: 1/8 SPT Vacuum ups PYK Vacuum up ssemblies PYK-120 thru PYK-200 Model Wt Ø Number oz (g) PYK-2-*.08 (2).79 (20).43 (11).63 (16).02 (.5).02 (.5).33 (8.5).11 (3) PYK-3.5-*.14 (3.5).79 (20).43 (11).63 (16).02 (.5).02 (.5).33 (8.5).11 (3) PYK-5-*.20 (5) 1.14 (29).51 (13).89 (22.5).03 (.8).24 (6).63 (16).56 (16) PYK-6-*.24 (6) 1.14 (29).51 (13).89 (22.5).03 (.8).24 (6).63 (16).56 (16) PYK-8-*.31 (8) 1.16 (29.5).51 (13).89 (22.5).05 (1.2).24 (6).63 (16).56 (16) PYK-10-*.39 (10) 1.18 (30).51 (13).89 (22.5).06 (1.5).24 (6).63 (16).56 (16) PYK-15-*.59 (15) 1.18 (30).55 (14).87 (22).07 (1.9).24 (6).63 (16).71 (20) PYK-20-*.79 (20) 1.26 (32).55 (14).87 (22).09 (2.3).24 (6).63 (16).71 (20) PYK-25-*.98 (25) 1.81 (46).79 (20) 1.26 (32).12 (3).31 (8).63 (16) 1.41 (40) PYK-30-* 1.18 (30) 1.73 (44).79 (20) 1.26 (32).08 (2).31 (8).63 (16) 1.41 (40) PYK-35-* 1.38 (35) 1.81 (46).79 (20) 1.26 (32).12 (3).31 (8).63 (16) 1.41 (40) PYK-40-* 1.57 (40) 1.81 (46).79 (20) 1.26 (32).14 (3.5).31 (8).63 (16) 1.77 (50) PYK-50-* 1.97 (50) 1.85 (47).79 (20) 1.26 (32).16 (4).31 (8).63 (16) 1.94 (55) PYK-60-* (60) 2.30 (58.5) 1.10 (28) 1.57 (40).20 (5).43 (11) 4.24 (120) PYK-80-* (80) 2.38 (60.5) 1.10 (28) 1.57 (40).24 (6).43 (11) 5.65 (160) PYK-95-* (95) 2.40 (61) 1.10 (28) 1.57 (40).24 (6).43 (11) 7.42 (210) PYK-120-* (120) 2.94 (75.5).47 (12) 1.97 (50).24 (6).79 (20) 1.18 ia. (30) 22.6 (640) PYK-150-* (150) 3.25 (82.5).47 (12) 1.97 (50).35 (9).79 (20) 1.18 ia. (30) 32.1 (910) PYK-200-* (200) 3.44 (87.5).47 (12) 1.97 (50).51 (13).79 (20) 1.18 ia. (30) 42.4 (1200) * up Material Vacuum Port M4x0.7 M8x1.25 PYK-15 thru PYK ia. Ø (5).118 ia. Ø (3) 2.75 ia. (70) (SW65) M16 M8 x 1.25 Mtg. Screws on 40mm ia. enterline M4x0.7 N1: 1/8 NPT 1: 1/8 SPP R1: 1/8 SPT 21 Parker annifin orporation ivision
20 atalog /US Ordering Information PTYS Vacuum up ssemblies Installation Note: When installing cup assemblies, use a sealant material to secure the assembly and prevent vacuum leakage. Shown are interchangable connectors & plugs for port connections. Interchangable* Pushlock Tube itting Mounting Thread ulkhead Level ompensator for P ups Vacuum ups PTYS Vacuum up ssemblies up iameter Stroke (mm) (mm) 2 (2) 3.5 (3.5) 5 (5) 6 (6) 3, 10, 15 8 (8) 10 (10) 15 (15) 20 (20) 25 (25) 30 (30) 35 (35) 6, 15, (40) 50 (50) 60 (60) 80 (80) 30, 50, (95) 120 (120) 150 (150) 20, (200) up iameter Vacuum Port TYS ssembly 1 2 Included in Kit (mm) ode Thread Part Number Stroke lbf (N) lbf (N) 2, 3.5 M3 TYS-2-3 3mm.11 (.49).13 (.59) M3x0.5 TYS mm.11 (.49).13 (.59) emale TYS mm.11 (.49).13 (.59) 5, 6, 8, 10, 15 M5 TYS-5-3 3mm.11 (.49).13 (.59) M5x0.8 TYS mm.14 (.61).26 (1.17) emale TYS mm.15 (.64).26 (1.17) 20, 25, 30, 35, 40 M5 TYS mm.56 (2.5).79 (3.4) M5x0.8 TYS mm.56 (2.5) 1.2 (4.9) emale TYS mm.67 (2.9) 1.4 (5.9) 50 M5 TYS mm.56 (2.5).79 (3.4) M5x0.8 TYS mm.56 (2.5) 1.2 (4.9) emale TYS mm.67 (2.9) 1.4 (5.9) 60, 80, 95 N1 TYS mm 1.6 (6.8) 3.6 (15.6) 1/8 NPT TYS mm 1.9 (8.3) 4.5 (19.6) emale TYS mm 2.2 (9.5) 4.8 (21) 120, 150, 200 N2 arb itting Plug * Not included with assembly Model Number Index (old Items are Stocked) PTYS 2 15 NR M3 up Material Stocked NR Nitrile Rubber SI Silicone vailable (onsult actory) U Urethane NR Nitrile S R hloroprene SI Silicone S KM louro Rubber S igh Temp Z Markless (old Items are Stocked) ompression orce 1/4 NPT TYS mm 3.6 (15.6) 6.8 (29) emale TYS mm 3.4 (14.7) 6.8 (29) 1 0% of Stroke Vacuum Port M3 M3 M5 M5 N1 1/8 NPT N2 1/4 NPT See hart elow 2 100% of Stroke 22 Parker annifin orporation ivision
21 atalog /US imensions imensions PTYS23 thru PTYS3.515 M3x0.5 M8x0.75 SW12 M5 SW6.35 (9) Vacuum ups PTYS Vacuum up ssemblies PTYS53 thru PTYS1515 M5x0.8 M8x0.75 Model Wt Ø Number oz (g) PTYS23*.08 (2) 1.97 (50).43 (11).28 (7).02 (.5).12 (3).12 (3).91 (23).21 (6) PTYS210*.08 (2) 2.24 (57).43 (11).28 (7).02 (.5).39 (10).12 (3).91 (23).39 (11) PTYS215*.08 (2) 2.74 (69.5).43 (11).28 (7).02 (.5).59 (15).12 (3) 1.20 (30.5).53 (15) PTYS3.53*.12 (3.5) 1.97 (50).43 (11).28 (7).02 (.5).12 (3).12 (3).91 (23).21 (6) PTYS3.510*.12 (3.5) 2.24 (57).43 (11).28 (7).02 (.5).39 (10).12 (3).91 (23).39 (11) PTYS3.515*.12 (3.5) 2.74 (69.5).43 (11).28 (7).02 (.5).59 (15).12 (3) 1.20 (30.5).53 (15) PTYS53*.20 (5) 2.13 (54).51 (13).31 (8).03 (.8).12 (3).12 (3).91 (23).25 (7) PTYS510*.20 (5) 2.42 (61.5).51 (13).31 (8).03 (.8).39 (10).12 (3).91 (23).65 (18.5) PTYS515*.20 (5) 2.91 (74).51 (13).31 (8).03 (.8).59 (15).12 (3) 1.20 (30.5).74 (21) PTYS63*.24 (6) 2.15 (54.5)).51 (13).31 (8).03 (.8).12 (3).12 (3).91 (23).25 (7) PTYS610*.24 (6) 2.42 (61.5).51 (13).31 (8).03 (.8).39 (10).12 (3).91 (23).65 (18.5) PTYS615*.24 (6) 2.91 (74).51 (13).31 (8).03 (.8).59 (15).12 (3) 1.20 (30.5).74 (21) PTYS83*.31 (8) 2.17 (55.5).51 (13).31 (8).05 (1.2).12 (3).12 (3).91 (23).25 (7) PTYS810*.31 (8) 2.44 (62).51 (13).31 (8).05 (1.2).39 (10).12 (3).91 (23).65 (18.5) PTYS815*.31 (8) 2.93 (74.5).51 (13).31 (8).05 (1.2).59 (15).12 (3) 1.20 (30.5).74 (21) PTYS103*.39 (10) 2.14 (54).51 (13).31 (8).06 (1.5).12 (3).12 (3).91 (23).64 (18) PTYS1010*.39 (10) 2.48 (63).51 (13).31 (8).06 (1.5).39 (10).12 (3).91 (23).65 (18.5) PTYS1015*.39 (10) 2.95 (75).51 (13).31 (8).06 (1.5).59 (15).12 (3) 1.20 (30.5).74 (21) PTYS153*.59 (15) 2.20 (56).51 (13).31 (8).08 (2).12 (3).12 (3).91 (23).64 (18) PTYS1510*.59 (15) 2.50 (63.5).51 (13).31 (8).08 (2).39 (10).12 (3).91 (23).65 (18.5) PTYS1515*.59 (15) 2.97 (75.5).51 (13).31 (8).08 (2).59 (15).12 (3) 1.20 (30.5).74 (21) * up Material Vacuum Port SW12 M8x0.75 M5x0.8 SW6.35 (9) 23 Parker annifin orporation ivision
22 atalog /US imensions imensions PTYS206 thru PTYS5030 M5x0.8 M14x1 M8 M5x0.8 Vacuum ups PTYS Vacuum up ssemblies Model Wt Ø Number oz (g) PTYS206*.79 (20) 3.01 (76.5).67 (17).39 (10).09 (2.3).24 (6).20 (5) 1.42 (36) 2.3 (65) PTYS2015*.79 (20) 3.37 (85.5).67 (17).39 (10).09 (2.3).59 (15).20 (5) 1.42 (36) 2.5 (71) PTYS2030*.79 (20) 4.82 (122.5).67 (17).39 (10).09 (2.3) 1.18 (30).20 (5) 2.28 (58) 3.4 (96) PTYS256*.98 (25) 3.07 (78).67 (17).39 (10).12 (3).24 (6).20 (5) 1.42 (36) 2.3 (66) PTYS2515*.98 (25) 3.43 (87).67 (17).39 (10).12 (3).59 (15).20 (5) 1.42 (36) 2.5 (71) PTYS2530*.98 (25) 4.88 (124).67 (17).39 (10).12 (3) 1.18 (30).20 (5) 2.28 ( (96) PTYS306* 1.18 (30) 2.99 (76).67 (17).39 (10).08 (2).24 (6).20 (5) 1.42 (36) 2.4 (67) PTYS3015* 1.18 (30) 3.35 (85).67 (17).39 (10).08 (2).59 (15).20 (5) 1.42 (36) 2.5 (72) PTYS3030* 1.18 (30) 4.80 (122).67 (17).39 (10).08 (2) 1.18 (30).20 (5) 2.28 ( (97) PTYS356* 1.38 (35) 3.07 (78).67 (17).39 (10).12 (3).24 (6).20 (5) 1.42 (36) 2.5 (71) PTYS3515* 1.38 (35) 3.43 (87).67 (17).39 (10).12 (3).59 (15).20 (5) 1.42 (36) 2.6 (74) PTYS3530* 1.38 (35) 4.88 (124).67 (17).39 (10).12 (3) 1.18 (30).20 (5) 2.28 ( (99) PTYS406* 1.57 (40) 3.07 (78).67 (17).39 (10).14 (3.5).24 (6).20 (5) 1.42 (36) 2.5 (71) PTYS4015* 1.57 (40) 3.43 (87).67 (17).39 (10).14 (3.5).59 (15).20 (5) 1.42 (36) 2.7 (76) PTYS4030* 1.57 (40) 4.88 (124).67 (17).39 (10).14 (3.5) 1.18 (30).20 (5) 2.28 ( (101) PTYS506* 1.97 (50) 3.11 (79).67 (17).39 (10).16 (4).24 (6).20 (5) 1.42 (36) 2.8 (80) PTYS5015* 1.97 (50) 3.46 (88).67 (17).39 (10).16 (4).59 (15).20 (5) 1.42 (36) 3.0 (85) PTYS5030* 1.97 (50) 4.92 (125).67 (17).39 (10).16 (4) 1.18 (30).20 (5) 2.28 (58) 3.9 (110) * up Material Vacuum Port SW12 SW19 SW17.20 (5) 24 Parker annifin orporation ivision
23 atalog /US (Revised 10/8/04) imensions imensions PTYS6030 thru PTYS9570 N1: 1/8 NPT 1: 1/8 SPP R1: 1/8 SPT M22x1.5 M14 N1: 1/8 NPT 1: 1/8 SPP R1: 1/8 SPT SW19.28 (7) J SW30 SW24 Vacuum ups PTYS Vacuum up ssemblies PTYS12020 thru PTYS20070 N2: 1/4 NPT 2: 1/4 SPP R2: 1/4 SPT N2: 1/4 NPT 2: 1/4 SPP R2: 1/4 SPT M30x1.5 M8 x 1.25 Mtg. Screws on 40mm ia. enterline Model Wt Ø J Number oz (g) PTYS6030* 2.36 (60) 6.02 (153) 1.28 (32.5).78 (20).20 (5) 1.77 (45).39 (10) 1.97 (50).47 (12) 9.7 (282) PTYS6050* 2.36 (60) 7.01 (178) 1.28 (32.5).78 (20).20 (5) 2.76 (70).39 (10) 1.97 (50).47 (12) 11.2 (316) PTYS6070* 2.36 (60) 7.99 (203) 1.28 (32.5).78 (20).20 (5) 3.74 (95).39 (10) 1.97 (50).47 (12) 12.1 (343) PTYS8030* 3.15 (80) 6.10 (155) 1.28 (32.5).78 (20).24 (6) 1.77 (45).39 (10) 1.97 (50).47 (12) 11 (310) PTYS8050* 3.15 (80) 7.09 (180) 1.28 (32.5).78 (20).24 (6) 2.76 (70).39 (10) 1.97 (50).47 (12) 12.2 (344) PTYS8070* 3.15 (80) 8.07 (205) 1.28 (32.5).78 (20).24 (6) 3.74 (95).39 (10) 1.97 (50).47 (12) 13.1 (371) PTYS9530* 3.74 (95) 6.12 (155.5) 1.28 (32.5).78 (20).24 (6) 1.77 (45).39 (10) 1.97 (50).47 (12) 12.4 (350) PTYS9550* 3.74 (95) 7.11 (180.5) 1.28 (32.5).78 (20).24 (6) 2.76 (70).39 (10) 1.97 (50).47 (12) 13.6 (384) PTYS9570* 3.74 (95) 8.09 (205.5) 1.28 (32.5).78 (20).24 (6) 3.74 (95).39 (10) 1.97 (50).47 (12) 14.5 (411) PTYS12020* 4.72 (120) 7.56 (192) 1.28 (32.5).71 (18).24 (6) 1.38 (35).39 (10) 2.36 (60) 1.38 (35) 41.2 (1165) PTYS12070* 4.72 (120) (257) 1.28 (32.5).71 (18).24 (6) 3.94 (100).39 (10) 2.36 (60) 1.38 (35) 44 (1246) PTYS15020* 5.91 (150) 7.83 (199) 1.28 (32.5).71 (18).35 (9) 1.38 (35).39 (10) 2.36 (60) 1.38 (35) 49 (1389) PTYS15070* 5.91 (150) (264) 1.28 (32.5).71 (18).35 (9) 3.94 (100).39 (10) 2.36 (60) 1.38 (35) 52 (1471) PTYS20020* 7.87 (200) 8.03 (204) 1.28 (32.5).71 (18).51 (13) 1.38 (35).39 (10) 2.36 (60) 1.38 (35) 62 (1755) PTYS20070* 7.87 (200) (269) 1.28 (32.5).71 (18).51 (13) 3.94 (100).39 (10) 2.36 (60) 1.38 (35) 64.9 (1836) * up Material Vacuum Port M18 SW26 SW36.31 (8) J 25 Parker annifin orporation ivision
24 atalog /US Ordering Information P Oval Vacuum ups imensions P-2x4 Vacuum ups P Oval Vacuum ups Model Number Ø Ø 1 Ø Ø Ø P-2x4.16 (4).08 (2).10 (2.6).05 (1.2).24 (6).24 (6).02 (.5).14 (3.5).10 (2.5) P-3.5x7.28 (7).14 (3.5).10 (2.6).06 (1.5).24 (6).24 (6).03 (.8).14 (3.5).10 (2.5) PTK Vacuum up ssemblies Model Number Index PTK - 2x4 - NR up iameter (mm) 2x4 (2 x 4) 3.5x7 (3.5 x 7) 1 up Material Stocked NR Nitrile Rubber SI Silicone vailable NR Nitrile S R hloroprene SI Silicone S U Urethane KM louro Rubber Model Number Index (ups Only) P - 2x4 - NR (old Items are Stocked) pplications These suction cups are for applications where insufficient surface areas are available for standard round P cups to secure vacuum for transfer. The oval or rectangular design allows you to maximize the available space to properly lift the product in high speed automation. These cups are non-rotational. P -3.5x7 up iameter (mm) 2x4 (2x4) 3.5x7 (3.5x7) PYK Vacuum up ssemblies Model Number Index PYK - 2x4 - NR up iameter (mm) 2x4 (2 x 4) 3.5x7 (3.5 x 7) up Material Stocked NR Nitrile Rubber SI Silicone vailable (onsult actory) NR Nitrile S R hloroprene SI Silicone S U Urethane KM louro Rubber 1 up Material Stocked NR Nitrile Rubber SI Silicone vailable NR Nitrile S R hloroprene SI Silicone S U Urethane KM louro Rubber 26 Parker annifin orporation ivision
25 atalog /US imensions Installation P Oval up with Top Stem onnection Vacuum ups Oval Vacuum up ssemblies Note: When installing cup assemblies, use a sealant material to secure the assembly and prevent vacuum leakage. Tube I.. listed below is a recommended minimum value, for that cup, to optimize response time of the system. Your requirements may vary. P Oval up Size (mm) TK itting ssembly Tube I Mounting Thread 2x4 3.5x7 TK-2x4/3.5x7.078 (2) M3x0.5 Male P Oval up with Side Stem onnection Mounting Thread PTK P Oval up Size (mm) YK itting Part Number Tube I Mounting Thread 2x4 3.5x7 Tube I.. PTK-2x4 & PTK-3.5x7.078 (2) YK-2x4/3.5x7.078 (2) M3 emale PYK-2x4 & PYK-3.5x7.098 ia. Ø (2.5) Mounting Thread Tube I...20 (5).047 ia. Ø (1.2).216 ia. Ø (5.5) 2 Places.79 (20) PYK.1 10 ia. Ø (2.8) M5 SW7.79 (20) M3.047 ia. Ø (1.2).33 (8.5) (24.7) (10.2).02 (.5) (11).62 (5) (15.7).76 (19.2).02 (.5) 27 Parker annifin orporation ivision
26 atalog /US eatures P5V-S ouble Lip lat ups ottom View Vacuum ups P5V-S Vacuum ups eatures ouble Sealing Lips for lexible Sheet andling Vacuum up rooves on Underside Increase olding rea Resists cceleration and eceleration Shear orces Strong Low Profile for ast Response Metal Insert itting for Stable Vertical and orizontal Lifts pplications These suction cups are ideal for applications where the product may flex when being lifted. ll cups have a double sealing lip and cleats to increase holding capacity. The top of the cup has a ribbed outer lip to prevent it from rolling over the surface to be lifted. ual sealing lips provide 2 seals for vacuum. s the product flexes, the outer lip seal may break, but the inner lip seal will hold the degree of vacuum for continued lifting capacity. In these types of applications, sizing should be done on the inner diameter cup dimension. 28 Parker annifin orporation ivision
27 atalog /US Ordering Information Model Number Index (old Items are Stocked) Specifications P5V - S up iameter (mm) (50) (75) (100) (150) (300) ll ups come standard with emale Vacuum Ports. (SPP) Part up Thread Number iameter (mm) Size (50) 1/8" (75) 1/4" (100) 3/8" (150) 1/2" (300)* 1" * 300mm up has an additional 1/2" female port for increase vacuum flow. Vacuum ups P5V-S Vacuum ups N up Material Stocked N Nitrile Rubber vailable (onsult actory) S Silicone 29 Parker annifin orporation ivision
28 atalog /US pplications & Technical ata pplication uide lat - Smooth Surface Main ata for lat P5V-S ups Volume V Vacuum ups P5V-S Vacuum ups up eflection Products With Smooth Surfaces estacking pplications up iameter up Radius R Model rea*** Volume (V) eflection (S) (mm) Number Inner Outer cm 2 Liters (mm) R1* R2** P5V-S (35) 1.97 (50) (4) 3.86 (98) 3.15 (80) P5V-S (54) 2.95 (75) (6) 6.97 (177) 4.88 (124) P5V-S (72) 3.94 (100) (8) (254) 6.34 (161) P5V-S (106) 5.91 (150) (11) (309) 9.92 (252) P5V-S (205) (300) (19) (1158) (581) * Minimum permissible radius for lifting using inner lip. ** Minimum permissible radius for lifting using outer lip. *** rea based on Outer up iameter S R1 Radius R2 30 Parker annifin orporation ivision
29 atalog /US imensions imensions Model Number * up Material 1/2 (30018 Only) 2.76 (70) Vacuum ups P5V-S Vacuum ups Ø Ø P5V-S50* 1.97 (50) 1/ (35) 0.43 (11) 0.71 (18) (2.2) 0.51 (13) (3.7) P5V-S75* 2.95 (75) 1/ (54) 0.55 (14) 0.87 (22) (3.5) 0.67 (17) (5.5) P5V-S100* 3.94 (100) 3/ (72) 0.71 (18) 1.10 (28) (5) 0.87 (22) (7.5) P5V-S150* 5.91 (150) 1/ (106) 1.02 (26) 1.65 (42) (7) 1.06 (27) 0.43 (11) P5V-S300* (300) (205) 1.73 (44) 2.76 (70) 0.59 (15) 1.81 (46) 0.75 (19) 31 Parker annifin orporation ivision
30 atalog /US eatures P ellows Vacuum ups P Series Vacuum ups Versatile bellow cup design provides increased sealing lip and level compensation for products with irregular, smooth, curved surfaces. PTM Series Male Thread onnector Simple male connection for low profile positions secured to a plate or bracket. UN, NPT,, metric threads. Internal hex for easy assembly. itting Material: luminum. PT Series emale Thread onnector Simple female connection for low profile positions secured to a plate or bracket. NPS, threads. Internal hex for easy assembly. itting Material: luminum. Vacuum ups P Vacuum ups eatures ellows esign for Level ompensation Within Restricted learances Sheet Separation for lexible and Stacked Products Soft Seal Lip for lexible Products 10mm to 150mm iameters pplications These cups are for curved, corrugated, lightly textured surfaces and flexible product. Under vacuum, the bellow cup will collapse on contact and lift the product for a short distance. This inherent performance facilitates lifting and destack operations by breaking the vacuum between stacked product. The bellow style adds level compensation for applications that have inconsistent stack heights or uneven surfaces. The inclusive 30-degree rotation of the bellow helps maintain the vacuum seal when lifting sheet products that flex. ecause of it s shape however the bellows suction cup is not suitable for applications involving lifting vertical surfaces. PTK Series arbed ulkhead Top stem connectors secured with jam nuts and allow tubing connections at the top side. Nickel plated brass materials. PYK Series 90 arbed dapter Side stem connectors allow you to secure the stem with a bolt through a plate or L bracket to allow the tube connection from the side port. Nickel plated brass materials. PTYS Series ulkhead Level ompensator 303 stainless steel construction secured with jam nuts. Spring biased compensators can absorb impacts of down-strokes and adjust for different levels of pick up points. 303 stainless corrosion resistant materials with drymet bushings increases the strength and life. 32 Parker annifin orporation ivision
31 atalog /US Ordering Information Model Number Index (ups Only) (old Items are Stocked) Specifications Suction up Material Vacuum ups P Vacuum ups P NR up iameter (mm) 10 (10) 40 (40) 15 (15) 50 (50) 20* (20) 75 (75) 20** (20) 110 (110) 30 (30) 150 (150) * vailable for PTK & PYK up ssemblies Only. ** vailable for PTM, PT & PTYS up ssemblies Only. up Material Stocked NR Nitrile Rubber SI Silicone U Urethane vailable (onsult actory) NR Nitrile S R hloroprene SI Silicone S KM louro Rubber S igh Temp NR NR R SI SI U KM S Nitrile Silicone louro Silicone Nitrile hloroprene Silicone Urethane S* S* Rubber igh Temp Operating Temperature ( ) to +120 to +120 to +140 to +250 to +250 to +120 to +230 to +300 lack / lack / lack / olor lack reen White lue rey lue ot Red ot White ot ardness, 55 ±5 70 ±5 55 ±5 55 ±5 55 ±5 55 ±5 70 ±5 55 ±5 Shore ( Sh) lectrical (Ωm) to 1000 to 1000 Wear Tear Strength ging Ozone asoline Oil cid lkali hemical Mechanical = excellent; = very good; = good; = medium; = poor; = not recommended * S: lectric Static issipative Material 33 Parker annifin orporation ivision
32 atalog /US pplications & Technical ata pplication uide ellows Round Objects Main ata for ellows P ups Vacuum ups P Vacuum ups Lifting (N) up Radius Model up iameter rea Volume (V) eflection (S) R Number cm 2 Liters (mm) (mm) P-10-*.39 (10) (4) 4 P-15-*.59 (15) (6) 6 P-20-*.79 (20) (9) 8 P-20-*.79 (20) (9) 8 P-30-* 1.18 (30) (13) 15 P-40-* 1.57 (40) (13) 30 P-50-* 1.97 (50) (20) 40 P-75-* 2.95 (75) (22) 70 P-110-* 4.33 (110) (29) 100 P-150-* 5.91 (150) (38) 130 * up Material Volume V Uneven Surfaces urved Product Level ompensation up eflection S lexible Product Soft Seal Lip Radius R 34 Parker annifin orporation ivision
33 atalog /US imensions imensions P-10 and P-20 P-50 Model Number * up Material J P-110 and P-150 Vacuum ups P Vacuum ups P-20 thru P-40 P-75 Ø Ø Ø Ø ØJ P-10-*.42 (10.6).16 (4).08 (2).79 (12.5).53 (13.5).30 (7.5).24 (6).08 (2).24 (6) P-15-*.59 (15).16 (4).16 (4).67 (17).63 (16).39 (10).24 (6).08 (2).24 (6) P-20-*.79 (20).24 (6).43 (10.8).94 (24).87 (22).47 (12).28 (7) P-20-*.79 (20).18 (4.6).43 (10.8).94 (24).77 (19.5).47 (12).18 (4.5) P-30-* 1.18 (30).23 (5.8).43 (10.8) 1.42 (36) 1.20 (30.5).67 (17).28 (7) P-40-* 1.57 (40).23 (5.8).43 (10.8) 1.81 (46) 1.20 (30.5).61 (15.5).28 (7) P-50-* 1.97(50).31 (7.8).78 (19.8) 2.34 (59.5) 1.44 (36.5).79 (20).28 (7) P-75-* 2.95 (75).49 (12.5) 3.31 (84) 1.71 (43.5).87 (22).10 (2.5) P-110-* 4.33 (110).55 (14).55 (14) 4.80 (122) 2.26 (57.5) 1.14 (29).059 (1.5) P-150-* 5.91 (150).79 (20).55 (14) 6.57 (167) 3.01 (76.5) 1.50 (38) 4xØ9xØ (1.5) M10x Parker annifin orporation ivision
34 atalog /US Ordering Information PTM Vacuum up ssemblies Installation Note: When installing cup assemblies, use a sealant material to secure the assembly and prevent vacuum leakage. Tube I.. listed below is a recommended minimum value, for that cup range, to optimize response time of the system. Your requirements may vary. Mounting Thread Tube I.. Male Threaded itting for P ups Vacuum ups PTM Vacuum up ssemblies PTM NR - M5 up iameter (mm) 10 (10) 40 (40) 15 (15) 50 (50) 20 (20) 75 (75) 30 (30) up iameter Mounting Mounting TM itting Included in Kit (mm) Thread ode Thread Part Number Min. Tube I 10, 15 20, 30, 40 Model Number Index (old Items are Stocked) (old Items are Stocked) M5 M5x0.8 Male TM-5-M5 1 1/8 SPP Male TM-5-1 N1 1/8 NPT Male TM-20-N1 1 1/8 SPP Male TM /4 SPP Male TM-20-2 M10 M10x1.25 Male TM-20-M10 N1 1/8 NPT Male TM-50-N1.157 (4).157 (4) /8 SPP Male TM (4) 2 1/4 SPP Male TM-50-2 N2 1/4 NPT Male TM-60-N /4 SPP Male TM (6.35) M10 M10x1.25 Male TM-60-M10 up Material Stocked Mounting Thread NR Nitrile M5 M5 Rubber N1 1/8 NPT SI Silicone 1 1/8 SPP U Urethane M10 M10 vailable N2 1/4 NPT (onsult actory) 2 1/4 SPP NR Nitrile S See hart R hloroprene elow SI Silicone S KM louro Rubber S igh Temp 36 Parker annifin orporation ivision
35 atalog /US imensions imensions PTM-10 thru PTM-15 M5: SW8 1: SW13 (10 & 15 Only) M5:.14 (3.5) 1:.20 (.5) (10 & 15 Only) (Revised 01/10/05) PTM-75 M5: M5 1: 1/8" SPP (10 & 15 Only) 9/16" M10x1.25 Vacuum ups PTM Vacuum up ssemblies PTM-20 thru PTM-50 N2: 1/4 NPT 2: 1/4 SPP M10: 10x thru 40: 1/2" 50: 9/16" N1: 1/8 NPT 1: 1/8 SPP M10: 10x1.25 2: 1/4 SPP Model Ø Number (M5) (N1 / 1) (M10 / 2) (N2) PTM-10-*-.39 (10).67 (17).18 (4.5).31 (8) See wg..30 (7.5) PTM-15-*-.59 (15).77 (19.5).18 (4.5).31 (8) See wg..39 (10) PTM-20-*-.79 (20) 1.06 (27).31 (8).39 (10).20 (5).47 (12) PTM-30-* (30) 1.40 (35.5).31 (8).39 (10).20 (5).67 (17) PTM-40-* (40) 1.40 (35.5).31 (8).39 (10).20 (5).61 (15.5) PTM-50-* (50) 1.63 (41.5).31 (8).39 (10).20 (5).79 (20) PTM-75-* (95) 1.99 (50.5).39 (10).59 (15).28 (7).87 (22) * up Material Thread Size 37 Parker annifin orporation ivision
36 atalog /US Ordering Information PT Vacuum up ssemblies Installation Note: When installing cup assemblies, use a sealant material to secure the assembly and prevent vacuum leakage. Tube I.. listed below is a recommended minimum value, for that cup range, to optimize response time of the system. Your requirements may vary. Pipe I.. Mounting Thread Mounting Thread emale Threaded itting for P ups Vacuum ups PT Vacuum up ssemblies Model Number Index (old Items are Stocked) PT NR - M5 up iameter (mm) 10 (10) 50 (50) 15 (15) 75 (75) 20 (20) 110 (110) 30 (30) 150 (150) 40 (40) up iameter Mounting Mounting T itting Included in Kit (mm) Thread ode Thread Part Number Min. Tube I 10, 15 M5 M5x0.8 emale T-5-M5 1 1/8 SPP Male TM (4) N1 1/8 NPT emale T-20-N1 20, 30, /8 SPP emale T (4) 2 1/4 SPP emale T-20-2 N1 1/8 NPT emale T-50-N /8 SPP emale T (4) 2 1/4 SPP emale T , 150 Tube I.. (old Items are Stocked) N2 1/4 NPT emale T-60-N2 2 1/4 SPP emale T-60-2 N4 1/2 NPT emale T-120-N4 4 1/2 SPP emale T up Material Stocked NR Nitrile Rubber SI Silicone U Urethane vailable (onsult actory) NR Nitrile S R hloroprene SI Silicone S KM louro Rubber S igh Temp Mounting Thread M5 M5 N1 1/8 NPT 1 1/8 SPP N2 1/4 NPT 2 1/4 SPP N4 1/2 NPT 4 1/2 SPP See hart elow.25 (6.35).312 (8) 38 Parker annifin orporation ivision
37 atalog /US imensions imensions PT-10 thru PT-15 PT-75 9/16" M5x0.8 1: 1/8 SPP N2: 1/4 NPT 2: 1/4 SPP Vacuum ups PT Vacuum up ssemblies PT-20 thru PT 50 PT-110 thru PT-150 Model Number Ø PT-10-*-.39 (10).85 (21.5).1.31 (8).30 (7.5) PT-15-*-.59 (15).94 (24).31 (8).39 (10) PT-20-*-.79 (20) 1.42 (36).55 (14).47 (12) PT-30-* (30) 1.75 (44.5).55 (14).70 (17) PT-40-* (40) 1.75 (44.5).55 (14).61 (15.5) PT-50-* (50) 1.99 (50.5).55 (14).79 (20) PT-75-* (95) 2.38 (60.5).77 (19.5).87 (22) PT-110-* (120) 3.07 (78).94 (24).51 (13) 1.14 (29) PT-150-* (150) 3.82 (97).94 (24).51 (13) 1.50 (38) * up Material Thread Size 20 thru 40: 1/2" 50: 9/ (57) O (48) cross lats N4: 1/2 NPT 4: 1/2 SPP N1: 1/8 NPT 1: 1/8 SPP 2: 1/4 SPP 1/4 NPT 1/4 SPP 39 Parker annifin orporation ivision
38 atalog /US Ordering Information PTK Vacuum up ssemblies Installation Note: When installing cup assemblies, use a sealant material to secure the assembly and prevent vacuum leakage. Tube I.. listed below is a recommended minimum value, for that cup range, to optimize response time of the system. Your requirements may vary. Mounting Thread. Tube I.. up Screw arbed ulkhead for P ups Vacuum ups PTK Vacuum up ssemblies Model Number Index (old Items are Stocked) PTK NR - up iameter Vacuum Port TK itting Mounting Included in Kit (mm) ode Thread Part Number up Screw Only Thread Tube I up iameter (mm) 10 (10) 40 (40) 15 (15) 50 (50) 20 (20) 75 (75) 30 (30) (old Items are Stocked) up Material Stocked NR Nitrile Rubber SI Silicone U Urethane vailable (onsult actory) NR Nitrile S R hloroprene SI Silicone S KM louro Rubber S igh Temp Vacuum Port lank arb N1 1/8 NPT 1 1/8 SPP R1 1/8 SPT See hart elow 10, 15 lank arb TK-5 N/ M9x1.0 Male.157 (4) 20 lank arb TK-20 P-20-M5 M8x1.25 Male.157 (4) 30, 40 lank arb TK-25 P-25/40-M6 M10x1.25 Male.157 (4) 50 lank arb TK-50 P-50-M8 M10x1.25 Male.157 (4) N1 1/8 NPT TK-60-N1 N/ M16x1.5 Male N/ /8 SPP TK-60-1 N/ M16x1.5 Male N/ R1 1/8 SPT TK-60-R1 N/ M16x1.5 Male N/ 40 Parker annifin orporation ivision
39 atalog /US imensions imensions PTK-10 thru PTK-15 PTK-30 thru PTK ia. Ø (5) M9x1.0 SW ia. Ø (5) M10x1.25 M5x0.8 SW ia. Ø (2.5).118 ia. Ø (3) Vacuum ups PTK Vacuum up ssemblies PTK-20 PTK ia. Ø (5) M8x1.25 SW10 M16x1.5 SW21 Model Wt Ø Number oz (g) PTK-10-*.39 (10) 2.05 (52).39 (10).89 (22.5).30 (7.5).61 (15.5).12 (3).5 (15) PTK-15-*.59 (15) 2.15 (54.5).39 (10).89 (22.5).39 (10).61 (15.5).12 (3).5 (15) PTK-20-*.79 (20) 2.26 (57.5).63 (16).87 (22).47 (12).59 (15).20 (5).7 (21) PTK-30-* 1.18 (30) 3.09 (78.5).63 (16) 1.26 (32).67 (17).79 (20).20 (5) 1.6 (45) PTK-40-* 1.57 (40) 3.09 (78.5).63 (16) 1.26 (32).61 (15.5).79 (20).20 (5) 1.7 (48) PTK-50-* 1.97 (50) 3.33 (84.5).63 (16) 1.26 (32).79 (20).79 (20).20 (5) 2.2 (62) PTK-75-* (95) 3.29 (83.5) 1.67 (42.5).87 (22).24 (6) 6.5 (186) * up Material Vacuum Port.118 ia. Ø (3) N1: 1/8 NPT 1: 1/8 SPP R1: 1/8 SPT 41 Parker annifin orporation ivision
40 atalog /US Ordering Information PYK Vacuum up ssemblies Installation Note: When installing cup assemblies, use a sealant material to secure the assembly and prevent vacuum leakage. Tube I.. listed below is a recommended minimum value, for that cup range, to optimize response time of the system. Your requirements may vary. Tube I.. Mounting Thread. up Screw 90 arbed dapter for P ups Vacuum ups PYK Vacuum up ssemblies Model Number Index (old Items are Stocked) PYK NR - up iameter Vacuum Port YK itting Mounting Included in Kit (mm) ode Thread Part Number up Screw Only Thread Tube I up iameter (mm) 10 (10) 40 (40) 15 (15) 50 (50) 20 (20) 75 (75) 30 (30) 110 (110) 40 (40) 150 (150) (old Items are Stocked) up Material Stocked NR Nitrile Rubber SI Silicone U Urethane vailable (onsult actory) NR Nitrile S R hloroprene SI Silicone S KM louro Rubber S igh Temp Vacuum Port lank arb N1 1/8 NPT 1 1/8 SPP R1 1/8 SPT See hart elow 10, 15 lank arb YK-5 N/ M4x0.7 emale.157 (4) 20 lank arb YK-20 P-20-M5 M4x0.7 emale.157 (4) 30, 40 lank arb YK-25 P-25/40-M6 M6x1.0 emale.157 (4) 50 lank arb YK-50 P-50-M8 M6x1.0 emale.157 (4) N1 1/8 NPT YK-60-N1 N/ M8x1.25 emale N/ /8 SPP YK-60-1 N/ M8x1.25 emale N/ R1 1/8 SPT YK-60-R1 N/ M8x1.25 emale N/ N1 1/8 NPT YK-120-N1 N/ M16x1.5 emale N/ 110, /8 SPP YK N/ M16x1.5 emale N/ R1 1/8 SPT YK-120-R1 N/ M16x1.5 emale N/ 42 Parker annifin orporation ivision
41 atalog /US imensions imensions PYK-10 thru PYK-15 PYK-75 N1: 1/8 NPT 1: 1/8 SPP R1: 1/8 SPT.197 ia. Ø (5).118 ia. Ø (3) M8x1.25 M4x0.7 PYK-110 thru PYK-150 Vacuum ups PYK Vacuum up ssemblies PYK-20 thru PYK-50 M8x ia. Ø (5).118 ia. Ø (3) 2.75 ia. (70) (SW65) M16x1.5 Model Wt Ø Number oz (g) PYK-10-*.39 (10) 1.42 (36).51 (13).89 (22.5).29 (7.5).24 (6).63 (16).6 (16) PYK-15-*.59 (15) 1.52 (38.5).51 (13).89 (22.5).39 (10).24 (6).63 (16).6 (16) PYK-20-*.79 (20) 1.63 (41.5).55 (14).87 (22).47 (12).24 (6).63 (16).7 (21) PYK-30-* 1.18 (30) 2.46 (62.5).79 (20) 1.26 (32).67 (17).24 (6).63 (16) 1.6 (45) PYK-40-* 1.57 (40) 2.46 (62.5).79 (20) 1.26 (32).61 (15.5).24 (6).63 (16) 2 (58) PYK-50-* 1.97 (50) 2.70 (68.5).79 (20) 1.26 (32).78 (20).24 (6).63 (16) 2.4 (67) PYK-75-* (95) 3.29 (83.5) 1.10 (28) 1.67 (42.5).86 (22).43 (11) 6.9 (176) PYK-110-* (120) 4.17 (106).47 (12) 1.97 (50) 1.14 (29).79 (20) 1.18 ia. (30) 26.4 (670) PYK-150-* (150) 4.92 (125).47 (12) 1.97 (50) 1.50 (38).79 (20) 1.18 ia. (30) 46.5 (1180) * up Material Vacuum Port 20: M4x thru 50: M6x1.0 N1: 1/8 NPT 1: 1/8 SPP R1: 1/8 SPT 43 Parker annifin orporation ivision
42 atalog /US Ordering Information PTYS Vacuum up ssemblies Installation Note: When installing cup assemblies, use a sealant material to secure the assembly and prevent vacuum leakage. Shown are interchangable connectors & plugs for port connections. Interchangable* Pushlock Tube itting Mounting Thread. arb itting Plug * Not included with assembly ulkhead Level ompensator for P ups Vacuum ups PTYS Vacuum up ssemblies up iameter Vacuum Port TYS ssembly 1 2 Included in Kit (mm) ode Thread Part Number Stroke lbf (N) lbf (N) 10, 15 M5 TYS-5-3 3mm.11 (.49).13 (.59) M5x0.8 TYS mm.11 (.49).13 (.59) emale TYS mm.11 (.49).13 (.59) 20, 30, 40 M5 TYS mm.56 (2.5).79 (3.4) M5x0.8 TYS mm.56 (2.5) 1.2 (4.9) emale TYS mm.67 (2.9) 1.4 (5.9) 50 M5 TYS mm.56 (2.5).79 (3.4) M5x0.8 TYS mm.56 (2.5) 1.2 (4.9) emale TYS mm.67 (2.9) 1.4 (5.9) 75 N1 TYS mm 1.6 (6.8) 3.6 (15.6) 1/8 NPT TYS mm 1.9 (8.3) 4.5 (19.6) emale TYS mm 2.2 (9.5) 4.8 (21) 110, 150 N2 Model Number Index (old Items are Stocked) PTYS 10 3 NR M5 up iameter Stroke (mm) (mm) 10 (10) 15 (15) 3, 10, (20) 30 (30) 40 (40) 6, 15, (50) 75 (75) 30, 50, (110) 150 (150) 20, 70 up Material Stocked NR Nitrile Rubber SI Silicone U Urethane vailable (onsult actory) NR Nitrile S R hloroprene SI Silicone S KM louro Rubber S igh Temp (old Items are Stocked) ompression orce 1/4 NPT TYS mm 3.6 (15.6) 6.8 (29) emale TYS mm 3.4 (14.7) 6.8 (29) 1 0% of Stroke Vacuum Ports M5 M5 N1 1/8 NPT N2 1/4 NPT See hart elow 2 100% of Stroke 44 Parker annifin orporation ivision
43 atalog /US imensions imensions PTYS103 thru PTYS1515 M5x0.8 M8x.75 SW12 M5x0.8 SW6.35 (9) PTYS206 thru PTYS5030 M5x0.8 M14x1 M5x0.8 SW12 SW19 SW17.20 (5) Vacuum ups PTYS Vacuum up ssemblies PTYS7530 N1: 1/8 NPT M22x1.5 N1: 1/8 NPT PTYS11020 thru PTYS15070 Model Wt Ø J Number oz (g) PTYS103*.39 (10) 2.42 (61.5).51 (13).31 (8).30 (7.5).12 (3).12 (3).91 (23).6 (18) PTYS1010*.39 (10) 2.70 (68.5).51 (13).31 (8).30 (7.5).39 (10).12 (3).91 (23).65 (18.5) PTYS1015*.39 (10) 3.19 (81).51 (13).31 (8).30 (7.5).59 (15).12 (3) 1.20 (30.5).7 (21) PTYS153*.59 (15) 2.52 (64).51 (13).31 (8).39 (10).12 (3).12 (3).91 (23).6 (18) PTYS1510*.59 (15) 2.80 (71).51 (13).31 (8).39 (10).39 (10).12 (3).91 (23).65 (18.5) PTYS1515*.59 (15) 3.29 (83.5).51 (13).31 (8).39 (10).59 (15).12 (3) 1.20 (30.5).7 (21) PTYS206*.79 (20) 3.54 (90).67 (17).39 (10).47 (12).24 (6).20 (5) 1.42 (36) 2.4 (67) PTYS2015*.79 (20) 3.90 (99).67 (17).39 (10).47 (12.59 (15).20 (5) 1.42 (36) 2.5 (72) PTYS2030*.79 (20) 5.36 (136).67 (17).39 (10).47 ( (30).20 (5) 2.28 (58) 3.4 (97) PTYS306* 1.18 (30) 3.72 (94.5).67 (17).39 (10).67 (17).24 (6).20 (5) 1.42 (36) 2.5 (72) PTYS3015* 1.18 (30) 4.07 (103.5).67 (17).39 (10).67 (17).59 (15).20 (5) 1.42 (36) 3.4 (97) PTYS3030* 1.18 (30) 5.53 (140.5).67 (17).39 (10).67 (17) 1.18 (30).20 (5) 2.28 (58) 3.6 (102) PTYS406* 1.57 (40) 3.72 (94.5).67 (17).39 (10).61 (15.5).24 (6).20 (5) 1.42 (36) 2.8 (78) PTYS4015* 1.57 (40) 4.07 (103.5).67 (17).39 (10).61 (15.5).59 (15).20 (5) 1.42 (36) 2.9 (83) PTYS4030* 1.57 (40) 5.53 (140.5).67 (17).39 (10).61 (15.5) 1.18 (30).20 (5) 2.28 (58) 3.8 (108) PTYS506* 1.97 (50) 3.96 (100.5).67 (17).39 (10).78 (20).24 (6).20 (5) 1.42 (36) 3.3 (92) PTYS5015* 1.97 (50) 4.31 (109.5).67 (17).39 (10).78 (20).59 (15).20 (5) 1.42 (36) 3.4 (97) PTYS5030* 1.97 (50) 5.77 (146.5).67 (17).39 (10).78 (20) 1.18 (30).20 (5) 2.28 (58) 4.3 (122) PTYS7530* 2.95 (75) 7.01 (178) 1.28 (32.5).78 (20).87 (22) 1.77 (45).39 (10) 1.97 (50).47 (12) 12 (339) PTYS7550* 2.95 (75) 7.99 (203) 1.28 (32.5).78 (20).87 (22) 2.76 (70).39 (10) 1.97 (50).47 (12) 13 (373) PTYS7570* 2.95 (75) 8.98 (228) 1.28 (32.5).78 (20).87 (22) 3.74 (95).39 (10) 1.97 (50).47 (12) 14 (400) PTYS11020* 4.33 (110) 8.82 (224) 1.18 (30).71 (18) 1.14 (29) 1.38 (35).39 (10) 2.36 (60) 1.38 (35) 42 (1194) PTYS11070* 4.33 (110) (289) 1.18 (30).71 (18) 1.14 (29) 3.94 (100).39 (10) 2.36 (60) 1.38 (35) 45 (1276) PTYS15020* 5.91 (150) 9.57 (243) 1.18 (30).71 (18) 1.50 (38) 1.38 (35).39 (10) 2.36 (60) 1.38 (35) 60 (1704) PTYS15070* 5.91 (150) (308) 1.18 (30).71 (18) 1.50 (38) 3.94 (100).39 (10) 2.36 (60) 1.38 (35) 63 (1786) * up Material Vacuum Port SW19.28 (7) J SW30 SW24 N2: 1/4 NPT N2: 1/4 NPT M30x1.5 M8x1.25 SW26 SW36.31 (8) J 45 Parker annifin orporation ivision
44 atalog /US eatures PJ Short ellows Vacuum ups PJ Series Vacuum ups Versatile bellow cup design provides increased sealing lip and level compensation for products with irregular, smooth, curved surfaces, or flexible sheets. PJTM Series Male Thread onnector Simple male connection for low profile positions secured to a plate or bracket. UN, NPT,, metric threads. Internal hex for easy assembly. itting Material: luminum. PJT Series emale Thread onnector Simple female connection for low profile positions secured to a plate or bracket. NPS, threads. Internal hex for easy assembly. itting Material: luminum. Vacuum ups PJ Vacuum ups eatures Short ellows for ast Response More Lip Seal ontact for orrugated, Textured Surfaces Soft Sealing Lip 6mm to 80mm pplications The short stroke bellow suction cup has an extra thin sealing edge and shorter stroke versus the traditional bellows for faster response. The cups are good for corrugated and smooth surfaces. PJTK Series arbed ulkhead Top stem connectors secured with jam nuts and allow tubing connections at the top side. Nickel plated brass materials. PJYK Series 90 arbed dapter Side stem connectors allow you to secure the stem with a bolt through a plate or L bracket to allow the tube connection from the side port. Nickel plated brass materials. PJTYS Series ulkhead Level ompensator 303 stainless steel construction secured with jam nuts. Spring biased compensators can absorb impacts of down-strokes and adjust for different levels of pick up points. 303 stainless corrosion resistant materials with drymet bushings increases the strength and life. 46 Parker annifin orporation ivision
45 atalog /US Ordering Information Model Number Index (ups Only) (old Items are Stocked) Specifications Suction up Material Vacuum ups PJ Vacuum ups PJ NR up iameter (mm) 6 (6) 35 (35) 8 (8) 40 (40) 10 (10) 50 (50) 15 (15) 60 (60) 20 (20) 70 (70) 30 (30) 80 (80) up Material Stocked NR Nitrile Rubber SI Silicone vailable (onsult actory) NR Nitrile S R hloroprene SI Silicone S U Urethane KM louro Rubber S igh Temp Z Markless NR NR R SI SI U KM S Z Nitrile Silicone louro Silicone Nitrile hloroprene Silicone Urethane Markless S* S* Rubber igh Temp Operating Temperature ( ) to +120 to +120 to +140 to +250 to +250 to +120 to +230 to +300 to +230 lack / lack / lack / lack / olor lack reen White lue rey lue ot Red ot White ot Yellow ot ardness, 55 ±5 70 ±5 55 ±5 55 ±5 55 ±5 55 ±5 70 ±5 55 ±5 70 ±5 Shore ( Sh) lectrical (Ωm) to 1000 to 1000 Wear Tear Strength ging Ozone asoline Oil cid lkali hemical Mechanical = excellent; = very good; = good; = medium; = poor; = not recommended * S: lectric Static issipative Material 47 Parker annifin orporation ivision
46 atalog /US pplications & Technical ata pplication uide Short ellows igh Speed Packaging Main ata for Short ellows PJ ups Vacuum ups PJ Vacuum ups Lifting 60% (N) up Radius Model up iameter rea Volume (V) eflection (S) R Number cm 2 Liters mm (mm) PJ-6-*.24 (6) PJ-8-*.31 (8) PJ-10-*.39 (10) PJ-15-*.59 (15) PJ-20-*.79 (20) PJ-30-* 1.18 (30) PJ-35-* 1.38 (35) PJ-40-* 1.57 (40) PJ-50-* 1.97 (50) PJ-60-* 2.36 (60) PJ-70-* 2.76 (70) PJ-80-* 3.15 (80) *up Material Volume V Level ompensation for Small lectronic omponents up eflection S lexible Product Soft Seal Lip Radius R 48 Parker annifin orporation ivision
47 atalog /US imensions imensions PJ-6 and PJ-8 PJ-20 PJ-50 * up Material Model Number Vacuum ups PJ Vacuum ups PJ-10 and PJ-15 PJ-30 thru PJ-40 PJ-60 thru PJ-80 M10x1.25 Ø Ø Ø Ø PJ-6-*.24 (6).16 (4).24 (6).30 (7.5).35 (9).17 (4.2).08 (2) PJ-8-*.31 (8).16 (4).24 (6).31 (8).35 (9).16 (4).08 (2) PJ-10-*.39 (10).18 (4.6).31 (7.8).43 (11).37 (9.5).12 (3).14 (3.5) PJ-15-*.59 (15).18 (4.6).31 (7.8).47 (12).43 (11).13 (3.3).14 (3.5) PJ-20-*.79 (20).18 (4.6).43 (10.8).59 (15).51 (13).22 (5.5).18 (4.5) PJ-30-* 1.18 (30).23 (5.8).43 (10.8).78 (20).71 (18).28 (7).28 (7) PJ-35-* 1.38 (35).23 (5.8).43 (10.8).98 (25).71 (18).28 (7).28 (7) PJ-40-* 1.57 (40).23 (5.8).43 (10.8) 1.18 (30).71 (18).28 (7.2).28 (7) PJ-50-* 1.97 (50).31 (7.8).78 (19.8) 1.57 (40).79 (20).35 (9).28 (7) PJ-60-* 2.36 (60).49 (12.5) 1.77 (45).89 (22.5).31 (8).10 (2.5) PJ-70-* 2.75 (70).49 (12.5) 2.17 (55).93 (23.5).37 (9.5).10 (2.5) PJ-80-* 3.15 (80).49 (12.5) 2.68 (68).93 (23.5).37 (9.5).10 (2.5) 49 Parker annifin orporation ivision
48 atalog /US Ordering Information PJTM Vacuum up ssemblies Installation Note: When installing cup assemblies, use a sealant material to secure the assembly and prevent vacuum leakage. Tube I.. listed below is a recommended minimum value, for that cup range, to optimize response time of the system. Your requirements may vary. Mounting Thread Tube I.. Male Threaded itting for PJ ups Vacuum ups PJTM Vacuum up ssemblies up iameter Mounting Mounting TM itting Included in Kit (mm) Thread ode Thread Part Number Min. Tube I 6, 8 Model Number Index (old Items are Stocked) PJTM NR - M5 up iameter (mm) 6 (6) 50 (50) 8 (8) 60 (60) 30 (30) 70 (70) 35 (35) 80 (80) 40 (40) (old Items are Stocked) M5 M5x0.8 Male TM-5-M5 1 1/8 SPP Male TM-5-1 up Material Stocked NR Nitrile Rubber SI Silicone vailable (onsult actory) NR Nitrile S R hloroprene SI Silicone S U Urethane KM louro Rubber S igh Temp Z Markless.157 (4) N1 1/8 NPT Male TM-20-N1 30, 35, /8 SPP Male TM (4) M10 M10x1.25 Male TM-20-M10 N1 1/8 NPT Male TM-50-N /8 SPP Male TM (4) 2 1/4 SPP Male TM-50-2 N2 1/4 NPT Male TM-60-N2 60, 70, /4 SPP Male TM (6.35) M10 M10x1.25 Male TM-60-M10 Mounting Thread M5 M5 N1 1/8 NPT 1 1/8 SPP M10 M10 N2 1/4 NPT 2 1/4 SPP See hart elow 50 Parker annifin orporation ivision
49 atalog /US imensions imensions PJTM-6 and PJTM-8 SW8 M5: M5 1: 1/8 SPP (6 & 8 Only) PJTM-60 thru PJTM-80 9/16" Vacuum ups PJTM Vacuum up ssemblies PJTM-30 thru PJTM thru 40: 1/2" 50: 9/16" Model Ø Number (M5) (N1 / 1) (M10 / 2) (N2) PJTM-6-*-.24 (6).49 (12.5).18 (4.5).31 (8).14 (3.5) PJTM-8-*-.31 (8).49 (12.5).18 (4.5).31 (8).14 (3.5) PJTM-30-* (30).91 (23).31 (8).39 (10).20 (5) PJTM-35-* (35).91 (23).31 (8).39 (10).20 (5) PJTM-40-* (40).91 (23).31 (8).39 (10).20 (5) PJTM-50-* (50).98 (25).31 (8).39 (10).20 (5) PJTM-60-* (60) 1.06 (27).39 (10).59 (15).28 (7) PJTM-70-* (70) 1.10 (28).39 (10).59 (15).28 (7) PJTM-80-* (80) 1.10 (28).39 (10).59 (15).28 (7) * up Material Thread Size N2: 1/4 NPT 2: 1/4 SPP M10: 10x1.25 N1: 1/8 NPT 1: 1/8 SPP M10: 10x1.25 2: 1/4 SPP 51 Parker annifin orporation ivision
50 atalog /US Ordering Information PJT Vacuum up ssemblies Installation Note: When installing cup assemblies, use a sealant material to secure the assembly and prevent vacuum leakage. Tube I.. listed below is a recommended minimum value, for that cup range, to optimize response time of the system. Your requirements may vary. Mounting Thread Pipe Mounting Thread emale Threaded itting for PJ ups Vacuum ups PJT Vacuum up ssemblies Model Number Index (old Items are Stocked) PJT NR - M5 up iameter (mm) 6 (6) 50 (50) 8 (8) 60 (60) 30 (30) 70 (70) 35 (35) 80 (80) 40 (40) Tube I.. up iameter Mounting Mounting T itting Included in Kit (mm) Thread ode Thread Part Number Min. Tube I 6, 8 M5 M5x0.8 emale T-5-M5.157 (4) N1 1/8 NPT emale T-20-N1 30, 35, /8 emale T (4) M10 M10x1.25 emale T-20-M10 N1 1/8 NPT emale T-50-N /8 emale T (4) 2 1/4 emale T , 70, 80 (old Items are Stocked) N2 1/4 NPT emale T-60-N2 2 1/4 emale T-60-2 up Material Stocked NR Nitrile Rubber SI Silicone vailable (onsult actory) NR Nitrile S R hloroprene SI Silicone S U Urethane KM louro Rubber S igh Temp Z Markless Mounting Thread M5 M5 N1 1/8 NPT 1 1/8 SPP M10 M10 N2 1/4 NPT 2 1/4 SPP See hart elow.25 (6.35) 52 Parker annifin orporation ivision
51 atalog /US imensions imensions PJT-6 and PJT-8 8mm M5x0.8 PJT-60 thru PJT-80 9/16" Model Number Ø PJT-6-*-.24 (6).55 (14).16 (4) PJT-8-*-.31 (8).55 (14).17 (4.2) PJT-30-* (30) 1.25 (32).28 (7) PJT-35-* (30) 1.25 (32).28 (7) PJT-40-* (40) 1.25(32).28 (7.2) PJT-50-* (50) 1.34 (34).35 (9) PJT-60-* (60) 1.56 (39.5).31 (8) PJT-70-* (70) 1.59 (40.5).37 (9.5) PJT-80-* (80) 1.59 (40.5).37 (9.5) * up Material Thread Size Vacuum ups PJT Vacuum up ssemblies PJT-30 thru PJT-50 N2: 1/4 NPT 2: 1/4 SPP 30 thru 40: 1/2" 50: 9/16" N1: 1/8 NPT 1: 1/8 SPP M10: 10x1.25 N2: 1/4 NPT 53 Parker annifin orporation ivision
52 atalog /US Ordering Information PJTK Vacuum up ssemblies Installation Note: When installing cup assemblies, use a sealant material to secure the assembly and prevent vacuum leakage. Tube I.. listed below is a recommended minimum value, for that cup range, to optimize response time of the system. Your requirements may vary. Mounting Thread. Tube I.. up Screw arbed ulkhead for PJ ups Vacuum ups PJTK Vacuum up ssemblies Model Number Index (old Items are Stocked) PJTK NR - up iameter (mm) 6 (6) 35 (35) 8 (8) 40 (40) 10 (10) 50 (50) 15 (15) 60 (60) 20 (20) 70 (70) 30 (30) 80 (80) up iameter Vacuum Port TK itting Mounting Included in Kit (mm) ode Thread Part Number up Screw Only Thread Tube I (old Items are Stocked) up Material Stocked NR Nitrile Rubber SI Silicone vailable (onsult actory) NR Nitrile S R hloroprene SI Silicone S U Urethane KM louro Rubber S igh Temp Z Markless Vacuum Port lank arb N1 1/8 NPT 1 1/8 SPP R1 1/8 SPT See hart elow 6, 8 lank arb TK-5 N/ M9x1.0 Male.157 (4) 10, 15 lank arb TK-15 P-15-M5 M8x1.25 Male.157 (4) 20 lank arb TK-20 P-20-M5 M8x1.25 Male.157 (4) 30, 35, 40 lank arb TK-25 P-25/40-M6 M10x1.5 Male.157 (4) 50 lank arb TK-50 P-50-M8 M10x1.5 Male.157 (4) N1 1/8 NPT TK-60-N1 N/ M16x1.5 Male N/ 60, 70, /8 SPP TK-60-1 N/ M16x1.5 Male N/ R1 1/8 SPT TK-60-R1 N/ M16x1.5 Male N/ 54 Parker annifin orporation ivision
53 atalog /US imensions imensions PJTK-6 and PJTK-8 PJTK-30 thru PJTK ia. Ø (5) M9x1.0 SW ia. Ø (5) M10x1.5 M5x0.8 SW ia. Ø (2.5).118 ia. Ø (3) Vacuum ups PJTK Vacuum up ssemblies PJTK-10 thru PJTK-20 PJTK-60 thru PJTK-80 M16x1.5 SW ia. Ø (5) M8x1.25 SW12 N1: 1/8 NPT 1: 1/8 SPP R1: 1/8 SPT Model Wt Ø Number oz (g) PJTK-6-*.24 (6) 1.30 (33).39 (10).55 (14).17 (4.2).47 (12).12 (3).4 (11) PJTK-8-*.31 (8) 1.30 (33).39 (10).55 (14).16 (4).47 (12).12 (3).4 (11) PJTK-10-*.39 (10) 1.87 (47.5).63 (16).87 (22).12 (3).59 (15).12 (3).5 (14) PJTK-15-*.59 (15) 1.93 (49).63 (16).87 (22).13 (3.3).59 (15).12 (3).5 (15) PJTK-20-*.79 (20) 2.01 (51).63 (16).87 (22).22 (5.5).59 (15).20 (5).6 (17) PJTK-30-* 1.18 (30) 2.60 (66).63 (16) 1.26 (32).28 (7).79 (20).20 (5) 1.5 (42) PJTK-35-* 1.38 (35) 2.60 (66).63 (16) 1.26 (32).28 (7).79 (20).20 (5) 1.6 (44) PJTK-40-* 1.57 (40) 2.60 (66).63 (16) 1.26 (32).28 (7.2).79 (20).20 (5) 1.6 (44) PJTK-50-* 1.97 (50) 2.68 (68).63 (16) 1.26 (32).35 (9).79 (20).20 (5) 25.0 (58) PJTK-60-* (60) 2.46 (62.5) 1.67 (42.5).31 (8).79 (20).24 (6) 5.1 (144) PJTK-70-* (70) 2.50 (63.5) 1.67 (42.5).37 (9.5).79 (20).24 (6) 5.7 (163) PJTK-80-* (80) 2.50 (63.5) 1.67 (42.5).37 (9.5).79 (20).24 (6) 6.7 (190) * up Material Vacuum Port.098 ia. Ø (2.5) 55 Parker annifin orporation ivision
54 atalog /US Ordering Information PJYK Vacuum up ssemblies Installation Note: When installing cup assemblies, use a sealant material to secure the assembly and prevent vacuum leakage. Tube I.. listed below is a recommended minimum value, for that cup range, to optimize response time of the system. Your requirements may vary. Tube I.. Mounting Thread up Screw 90 arbed dapter for PJ ups Vacuum ups PJYK Vacuum up ssemblies Model Number Index (old Items are Stocked) PJYK NR - up iameter Vacuum Port YK itting Mounting Included in Kit (mm) ode Thread Part Number up Screw Only Thread Tube I up iameter (mm) 6 (6) 35 (35) 8 (8) 40 (40) 10 (10) 50 (50) 15 (15) 60 (60) 20 (20) 70 (70) 30 (30) 80 (80) (old Items are Stocked) up Material Stocked NR Nitrile Rubber SI Silicone vailable (onsult actory) NR Nitrile S R hloroprene SI Silicone S U Urethane KM louro Rubber S igh Temp Z Markless Vacuum Port lank arb N1 1/8 NPT 1 1/8 SPP R1 1/8 SPT See hart elow 6, 8 lank arb YK-5 N/ M4x0.7 emale.157 (4) 10, 15 lank arb YK-15 P-15-M5 M4x0.7 emale.157 (4) 20 lank arb YK-20 P-20-M5 M4x0.7 emale.157 (4) 30, 35, 40 lank arb YK-25 P-25/40-M6 M6x1.0 emale.157 (4) 50 YK-50 P-50-M8 M6x1.0 emale.157 (4) N1 1/8 NPT YK-60-N1 N/ M8x1.25 emale N/ 60, 70, /8 SPP YK-60-1 N/ M8x1.25 emale N/ R1 1/8 SPT YK-60-R1 N/ M8x1.25 emale N/ 56 Parker annifin orporation ivision
55 atalog /US imensions imensions PJYK-6 and PJYK-8 PJYK-25 thru PJYK ia. Ø (5).197 ia. Ø (5).118 ia. Ø (3).118 ia. Ø (3) M4x0.7 M6x1.0 Vacuum ups PJYK Vacuum up ssemblies PJYK-10 thru PJYK-20 PJYK-60 thru PJYK-80 N1: 1/8 NPT 1: 1/8 SPP R1: 1/8 SPT Model Wt Ø Number oz (g) PJYK-6-*.24 (6) 1.24 (31.5).51 (13).89 (22.5).17 (4.2).24 (6).63 (16).56 (16) PJYK-8-*.31 (8) 1.24 (31.5).51 (13).89 (22.5).17 (4.2).24 (6).63 (16).56 (16) PJYK-10-*.39 (10) 1.24 (31.5).55 (14).87 (22).12 (3).24 (6).63 (16).59 (17) PJYK-15-*.59 (15) 1.30 (33).55 (14).87 (22).13 (3.3).24 (6).63 (16).63 (18) PJYK-20-*.79 (20) 1.38 (35).55 (14).87 (22).22 (5.5).24 (6).63 (16).7 (20) PJYK-30-* 1.18 (30) 1.97 (50).79 (20) 1.26 (32).28 (7).31 (8).63 (16) 1.6 (46) PJYK-35-* 1.38 (35) 1.97 (50).79 (20) 1.26 (32).28 (7).31 (8).63 (16) 1.7 (48) PJYK-40-* 1.57 (40) 1.97 (50).79 (20) 1.26 (32).28 (7.2).31 (8).63 (16) 1.7 (48) PJYK-50-* 1.97 (50) 2.05 (52).79 (20) 1.26 (32).35 (9).31 (8).63 (16) 2.2 (62) PJYK-60-* (60) 2.46 (62.5) 1.10 (28) 1.67 (42.5).31 (8).43 (11) 4.9 (139) PJYK-70-* (70) 2.50 (63.5) 1.10 (28) 1.67 (42.5).37 (9.5).43 (11) 5.6 (158) PJYK-80-* (80) 2.50 (63.5) 1.10 (28) 1.67 (42.5).37 (9.5).43 (11) 6.5 (185) * up Material Vacuum Port.197 ia. Ø (5).118 ia. Ø (3) M8x1.25 M4x Parker annifin orporation ivision
56 atalog /US Ordering Information PJTYS Vacuum up ssemblies Installation Note: When installing cup assemblies, use a sealant material to secure the assembly and prevent vacuum leakage. Shown are interchangable connectors & plugs for port connections. Interchangable* Pushlock Tube itting Mounting Thread. arb itting Plug * Not included with assembly ulkhead Level ompensator for PJ ups Vacuum ups PJTYS Vacuum up ssemblies Model Number Index (old Items are Stocked) PJTYS 10 3 NR M5 up iameter Stroke (mm) (mm) 6 (6) 8 (8) 3, 10, (10) 15 (15) 20 (20) 30 (30) 35 (35) 6, 15, (40) 50 (50) 60 (60) 70 (70) 30, 50, (80) up iameter Vacuum Port TYS & JTYS ssembly 1 2 Included in Kit (mm) ode Thread Part Number Stroke lbf (N) lbf (N) TYS-5-3 3mm.11 (.49).13 (.59) M5x0.8 6, 8 M5 TYS mm.14 (.61).26 (1.17) emale TYS mm.15 (.64).26 (1.17) 10, 15 M5 JTYS mm.11 (.49).13 (.59) M5x0.8 JTYS mm.56 (2.5) 1.2 (4.9) emale JTYS mm.67 (2.9) 1.4 (5.9) 20 M5 JTYS mm.56 (2.5).79 (3.4) M5x0.8 JTYS mm.56 (2.5) 1.2 (4.9) emale JTYS mm.67 (2.9) 1.4 (5.9) 30, 35, 40 M5 TYS mm.56 (2.5).79 (3.4) M5x0.8 TYS mm.56 (2.5) 1.2 (4.9) emale TYS mm.67 (2.9) 1.4 (5.9) 50 M5 TYS mm.56 (2.5).79 (3.4) M5x0.8 TYS mm.56 (2.5) 1.2 (4.9) emale TYS mm.67 (2.9) 1.4 (5.9) 60, 70, 80 N1 1/8 NPT emale up Material Stocked NR Nitrile Rubber SI Silicone vailable (onsult actory) NR Nitrile S R hloroprene SI Silicone S U Urethane KM louro Rubber S igh Temp Z Markless (old Items are Stocked) ompression orce TYS mm 1.6 (6.8) 3.6 (15.6) TYS mm 1.9 (8.3) 4.5 (19.6) TYS mm 2.2 (9.5) 4.8 (21) 1 0% of Stroke Vacuum Port M5 M5 N1 1/8 NPT See hart elow 2 100% of Stroke 58 Parker annifin orporation ivision
57 atalog /US imensions imensions PJTYS63 thru PJTYS815 M5x0.8 M8x0.75 SW12 M5x0.8 SW6.35 (9) Vacuum ups PJTYS Vacuum up ssemblies PJTYS103 thru PJTYS2030 M5x0.8 M8x0.75 M5x0.8 SW6 PJTYS-10/15.35 (9) PJTYS 20/25.20 (5) Model Wt Ø Number oz (g) PJTYS63*.24 (6) 2.24 (57).51 (13).31 (8).17 (4.2).12 (3).12 (3).91 (23).2 (7) PJTYS610*.24 (6) 2.52 (64).51 (13).31 (8).17 (4.2).39 (10).12 (3).91 (23).3 (9) PJTYS615*.24 (6) 3.01 (76.5).51 (13).31 (8).17 (4.2).59 (15).12 (3) 1.20 (30.5).4 (11) PJTYS83*.31 (8) 2.24 (57).51 (13).31 (8).16 (4).12 (3).12 (3).91 (23).2 (7) PJTYS810*.31 (8) 2.52 (64).51 (13).31 (8).16 (4).39 (10).12 (3).91 (23).3 (9) PJTYS815*.31 (8) 3.01 (76.5).51 (13).31 (8).16 (4).59 (15).12 (3) 1.20 (30.5).4 (11) PJTYS103*.39 (10) 2.24 (57).51 (13).31 (8).12 (3).12 (3).20 (5).91 (23) 1.0 (30.5) PJTYS1010*.39 (10) 2.52 (64).51 (13).31 (8).12 (3).39 (10).20 (5).91 (23) 1.1 (31) PJTYS1015*.39 (10) 3.01 (76.5).51 (13).31 (8).12 (3).59 (15).20 (5) 1.20 (30.5) 1.2 (33.5) PJTYS153*.59 (15) 2.32 (59).51 (13).31 (8).13 (3.3).12 (3).20 (5).91 (23) 1.1 (31) PJTYS1510*.59 (15) 2.60 (66).51 (13).31 (8).13 (3.3).39 (10).20 (5).91 (23) 1.1 (32) PJTYS1515*.59 (15) 3.07 (78).51 (13).31 (8).13 (3.3).59 (15).20 (5) 1.20 (30.5) 1.3 (34.5) PJTYS206*.79 (20) 2.72 (69).67 (17).39 (10).22 (5.5).24 (6).20 (5) 1.42 (36) 2.3 (66) PJTYS2015*.79 (20) 3.07 (78).67 (17).39 (10).22 (5.5).59 (15).20 (5) 1.42 (36) 2.5 (71) PJTYS2030*.79 (20) 4.53 (115).67 (17).39 (10).22 (5.5) 1.18 (30).20 (5) 2.28 (58) 3.4 (96) ** up Material Vacuum Port SW12 59 Parker annifin orporation ivision
58 atalog /US imensions imensions PJTYS306 thru PJTYS5030 M14x1 M5x0.8 M5x0.8 Vacuum ups PJTYS Vacuum up ssemblies Model Wt Ø J Number oz (g) PJTYS306* 1.18 (30) 3.23 (82).67 (17).39 (10).28 (7).24 (6).20 (5) 1.42 (36) 2.4 (69) PJTYS3015* 1.18 (30) 3.58 (91).67 (17).39 (10).28 (7).59 (15).20 (5) 1.42 (36) 2.6 (74) PJTYS3030* 1.18 (30) 5.04 (128).67 (17).39 (10).28 (7) 1.18 (30).20 (5) 2.28 (58) 3.5 (99) PJTYS356* 1.38 (35) 3.23 (82).67 (17).39 (10).28 (7).24 (6).20 (5) 1.42 (36) 2.5 (71.5) PJTYS3515* 1.38 (35) 3.58 (91).67 (17).39 (10).28 (7).59 (15).20 (5) 1.42 (36) 2.7 (76.5) PJTYS3530* 1.38 (35) 5.04 (128).67 (17).39 (10).28 (7) 1.18 (30).20 (5) 2.28 (58) 3.6 (101.5) PJTYS406* 1.57 (40) 3.23 (82).67 (17).39 (10).28 (7.2).24 (6).20 (5) 1.42 (36) 2.6 (73.5) PJTYS4015* 1.57 (40) 3.58 (91).67 (17).39 (10).28 (7.2).59 (15).20 (5) 1.42 (36) 2.8 (78.5) PJTYS4030* 1.57 (40) 5.04 (128).67 (17).39 (10).28 (7.2) 1.18 (30).20 (5) 2.28 (58) 3.7 (103.5) PJTYS506* 1.97 (50) 3.31 (84).67 (17).39 (10).35 (9).24 (6).20 (5) 1.42 (36) 3.1 (89) PJTYS5015* 1.97 (50) 3.66 (93).67 (17).39 (10).35 (9).59 (15).20 (5) 1.42 (36) 3.3 (94) PJTYS5030* 1.97 (50) 5.12 (130).67 (17).39 (10).35 (9) 1.18 (30).20 (5) 2.28 (58) 4.2 (119) ** up Material Vacuum Port SW12 SW19 SW17.20 (5) 60 Parker annifin orporation ivision
59 atalog /US imensions imensions PJTYS6030 thru PJTYS8070 N1: 1/8 NPT M22x1.5 N1: 1/8 NPT Vacuum ups PJTYS Vacuum up ssemblies Model Wt Ø J Number oz (g) PJTYS6030* 3.74 (60) 6.18 (157) 1.18 (30).79 (20).31 (8) 1.18 (45).39 (10) 1.97 (50).47 (12) 10.4 (294) PJTYS6050* 3.74 (60) 7.17 (182) 1.18 (30).79 (20).31 (8) 2.76 (70).39 (10) 1.97 (50).47 (12) 11.6 (328) PJTYS6070* 3.74 (60) 8.15 (207) 1.18 (30).79 (20).31 (8) 3.74 (95).39 (10) 1.97 (50).47 (12) 12.5 (355) PJTYS7030* 4.72 (70) 6.22 (158) 1.18 (30).79 (20).37 (9.5) 1.18 (45).39 (10) 1.97 (50).47 (12) 10.9 (309) PJTYS7050* 4.72 (70) 7.20 (183) 1.18 (30).79 (20).37 (9.5) 2.76 (70).39 (10) 1.97 (50).47 (12) 12.2 (346) PJTYS7070* 4.72 (70) 8.19 (208) 1.18 (30).79 (20).37 (9.5) 3.74 (95).39 (10) 1.97 (50).47 (12) 13.1 (370) PJTYS8030* 5.91 (80) 6.22 (158) 1.18 (30).79 (20).37 (9.5) 1.18 (45).39 (10) 1.97 (50).47 (12) 11.9 (338) PJTYS8050* 5.91 (80) 7.20 (183) 1.18 (30).79 (20).37 (9.5) 2.76 (70).39 (10) 1.97 (50).47 (12) 13.1 (372) PJTYS8070* 5.91 (80) 8.19 (208) 1.18 (30).79 (20).37 (9.5) 3.74 (95).39 (10) 1.97 (50).47 (12) 14.1 (399) ** up Material Vacuum Port SW19.28 (7) SW30 SW24 J 61 Parker annifin orporation ivision
60 atalog /US eatures P Multiple ellows Vacuum ups P Series Vacuum ups 2-1/2 bellows design minimizes contact pressure applied to the product. The soft seal lip and touch allows the cup to conform to the product s surface to make a vacuum seal. PTM Series Male Thread onnector Simple male connection for low profile positions secured to a plate or bracket. UN, NPT,, metric threads. Internal hex for easy assembly. itting Material: luminum. PT Series emale Thread onnector Simple female connection for low profile positions secured to a plate or bracket. NPS, threads. Internal hex for easy assembly. itting Material: luminum. Vacuum ups P Vacuum ups eatures Soft Touch xtra Level ompensation lexible Sealing Lip for Irregular urved Surfaces 5mm to 90mm in iameter pplications These multiple bellow cups are designed for applications that require additional level compensation, more flexibility, or minimum back pressure for a soft touch. The multiple bellow has a soft sealing edge good for a variety of sensitive applications; such as food packaging, / V, medical packaging, and highly irregular curved surfaces. ups can also be used to assist with sheet separation in destack operations. PTK Series arbed ulkhead Top stem connectors secured with jam nuts and allow tubing connections at the top side. Nickel plated brass materials. PYK Series 90 arbed dapter Side stem connectors allow you to secure the stem with a bolt through a plate or L bracket to allow the tube connection from the side port. Nickel plated brass materials. 62 Parker annifin orporation ivision
61 atalog /US Ordering Information Model Number Index (ups Only) (old Items are Stocked) Specifications Suction up Material up iameter (mm) 5 (5) 30 (30) 7 (7) 40 (40) 10 (10) 60 (60) 15 (15) 90 (90) 20 (20) Vacuum ups P Vacuum ups P NR up Material Standard NR Nitrile Rubber SI Silicone vailable (onsult actory) NR Nitrile S R hloroprene U Urethane SI Silicone S KM louro Rubber S igh Temp NR NR R SI SI U KM S Nitrile Silicone louro Silicone Nitrile hloroprene Silicone Urethane S* S* Rubber igh Temp Operating Temperature ( ) to +120 to +120 to +140 to +250 to +250 to +120 to +230 to +300 lack / reen or lack/ lack / lack / olor lack White lue rey lue ot reen ot Red ot White ot ardness, 55 ±5 70 ±5 55 ±5 55 ±5 55 ±5 55 ±5 70 ±5 55 ±5 Shore ( Sh) lectrical (Ωm) to 1000 to 1000 Wear Tear Strength ging Ozone asoline Oil cid lkali hemical Mechanical = excellent; = very good; = good; = medium; = poor; = not recommended * S: lectric Static issipative Material 63 Parker annifin orporation ivision
62 atalog /US pplications & Technical ata pplication uide 2-1/2 ellows estack Perimeter Separation Main ata for 2-1/2 ellows PJ ups Vacuum ups P Vacuum ups Lifting 60% (N) up Radius Model up iameter rea Volume (V) eflection (S) R Number cm 2 Liters mm (mm) P-5-*.20 (5) P-7-*.28 (7) P-10-*.39 (10) P-15-*.59 (15) P-20-*.79 (20) P-30-* 1.18 (30) P-40-* 1.57 (40) P-60-* 2.36 (60) P-90-* 3.54 (90) * up Material Volume V Level ompensation for applications where Level ompensators do not have adequate space up eflection S ontrolling downstroke lifts product on contact Radius R 64 Parker annifin orporation ivision
63 atalog /US imensions imensions P-5 and P-7 P-30 thru P-60 * up Material Model Number J J Vacuum ups P Vacuum ups P-10 thru P-20 P-90 Ø Ø Ø Ø J P-5-*.20 (5).16 (4).08 (2).30 (7.5).37 (9.5).12 (3).16 (4).08 (2).24 (6) P-7-*.28 (7).16 (4).08 (2).30 (7.5).39 (10).12 (3).16 (4).08 (2).24 (6) P-10-*.35 (9).20 (5).59 (15).12 (3).28 (7).35 (9) P-15-*.60 (15.2).20 (5).90 (22).39 (10).35 (9).39 (10) P-20-*.79 (20).20 (5).91 (23).39 (10).35 (9).39 (10) P-30-* 1.26 (32).31 (8) 1.48 (37.5).57 (14.5).67 (17).51 (13).71 (18) P-40-* 1.65 (42).31 (8) 1.81 (46).87 (22).67 (17).51 (13).79 (20) P-60-* 2.44 (62).31 (8) 2.17 (55) 1.06 (27).71 (18).51 (13).85 (21.5) P-90-* 3.46 (88).47 (12) 3.44 (87.5) 1.65 (42) 1.02 (26).79 (20.98 (25) J J 65 Parker annifin orporation ivision
64 atalog /US Ordering Information PTM Vacuum up ssemblies Installation Note: When installing cup assemblies, use a sealant material to secure the assembly and prevent Mounting vacuum leakage. Thread. Tube I.. listed below is a recommended minimum value, for that cup range, to optimize response time of the system. Your requirements may vary. Tube I.. Male Threaded itting for P ups Vacuum ups PTM Vacuum up ssemblies Model Number Index (old Items are Stocked) PTM NR - M5 up iameter Mounting Mounting TM & TM itting Included in Kit (mm) Thread Thread ode Part Number Min. Tube I 5, 7 M5 M5x0.8 Male TM-5-M5.098 (2.5mm) M5 M5x0.8 Male TM-10-M5 10, 15, 20 N1 1/8 NPT Male TM-10-N1.156 (4mm) 1 1/8 SPP Male TM-10-1 N1 1/8 NPT Male TM-30-N1 30, 40, /8 SPP Male TM (6.35mm) 2 1/4 SPP Male TM up iameter (mm) 5 (5) 30 (30) 7 (7) 40 (40) 10 (10) 60 (60) 15 (15) 90 (90) 20 (208) (old Items are Stocked) N2 1/4 NPT Male TM-90-N2 2 1/4 SPP Male TM-90-2 up Material Stocked NR Nitrile Rubber SI Silicone vailable (onsult actory) NR Nitrile S R hloroprene U Urethane SI Silicone S KM louro Rubber S igh Temp Mounting Thread M5 M5 N1 1/8 NPT 1 1/8 SPP N2 1/4 NPT 2 1/4 SPP See hart elow.31 (8mm) 66 Parker annifin orporation ivision
65 atalog /US imensions imensions PTM-5 and PTM-7 PTM-30 thru PTM-60 1/2" SW8 M5: M5 N1: 1/8 NPT 1: 1/8 SPP 2: 1/4 SPP Vacuum ups PTM Vacuum up ssemblies PTM-10 thru PTM-20 PTM-90 5/16" M5: M5 N1: 1/8 NPT 1: 1/8 SPP Model Ø Number (M5) (N1 / 1) M10 / 2) (N2) PTM-5-*-.20 (5).51 (13).18 (4.5).14 (3.5).12 (3) PTM-7-*-.28 (7).53 (13.5).18 (4.5).14 (3.5).12 (3) PTM-10-*-.35 (9).69 (17.5).18 (4.5).31 (8).10 (2.5).12 (3) PTM-15-*-.60 (15.2) 1.04 (25.5).18 (4.5).31 (8).10 (2.5).39 (10) PTM-20-*-.79 (20) 1.04 (25.5).18 (4.5).31 (8).10 (2.5).39 (10) PTM-30-* (32) 1.67 (42.5).31 (8).39 (10).20 (5).57 (14.5) PTM-40-* (42) 2.01 (51).31 (8).39 (10).20 (5).87 (22) PTM-60-* (62) 2.36 (60).31 (8).39 (10).20 (5) 1.06 (27) PTM-90-* (88) 3.64 (92.5).39 (10).59 (15).20 (5) 1.65 (42) * up Material Thread Size N2: 1/4 NPT 2: 1/4 SPP 9/16" 67 Parker annifin orporation ivision
66 atalog /US Ordering Information PT Vacuum up ssemblies Installation Mounting Pipe I.. Mounting Thread emale Threaded itting for P ups Vacuum ups PT Vacuum up ssemblies up iameter Mounting Mounting T & T itting Included in Kit (mm) Thread Thread ode Part Number Min. Tube I 5, 7 M5 M5x0.8 emale T-5-M5.098 (2.5mm) 10, 15, 20 N1 1/8 NPT emale T-10-N1 1 1/8 SPP emale T (4mm) N1 1/8 NPT emale T-30-N1 30, 40, /8 SPP emale T (6.35mm 2 1/4 SPP emale T Mounting Thread Tube I.. Model Number Index (old Items are Stocked) PT NR - M5 up iameter (mm) 5 (5) 30 (30) 7 (7) 40 (40) 10 (10) 60 (60) 15 (15) 90 (90) 20 (20) Note: When installing cup assemblies, use a sealant material to secure the assembly and prevent vacuum leakage. Tube I.. listed below is a recommended minimum value, for that cup range, to optimize response time of the system. Your requirements may vary. (old Items are Stocked) N2 1/4 NPT emale T-90-N2 2 1/4 SPP emale T-90-2 up Material Stocked NR Nitrile Rubber SI Silicone vailable (onsult actory) NR Nitrile S R hloroprene U Urethane SI Silicone S KM louro Rubber S igh Temp.31 (8) Mounting Thread M5 M5 N1 1/8 NPT 1 1/8 SPP N2 1/4 NPT 2 1/4 SPP See hart elow 68 Parker annifin orporation ivision
67 atalog /US imensions imensions PT-5 and PT-7 PT-30 thru PT-60 1/2" SW8 M5 PT-10 thru PT-20 Model Number Ø PT5*.20 (5).85 (21.5).47 (12).31 (8).12 (3) PT7*.28 (7).87 (22).47 (12).31 (8).12 (3) PT10*.35 (9) 1.06 (27).47 (12).31 (8).12 (3) PT15*.60 (15.2) 1.38 (35).47 (12).31 (8).39 (10) PT20*.79 (20) 1.38 (35).47 (12).31 (8).39 (10) PT30* 1.26 (32) 2.03 (51.5).55 (14).31 (8).57 (14.5) PT40* 1.65 (42) 2.36 (60).55 (14).31 (8).87 (22) PT60* 2.44 (62) 2.72 (69).55 (14).31 (8) 1.06 (27) PT90* 3.46 (88) 4.13 (105).69 (17.5).39 (10) 1.65 (42) * up Material Thread Size N1: 1/8 NPT 1: 1/8 SPP 2: 1/4 SPP Vacuum ups PT Vacuum up ssemblies PT-90 9/16" 1/2" N1: 1/8 NPT 1: 1/8 SPP N2: 1/4 NPT 2: 1/4 SPP 69 Parker annifin orporation ivision
68 atalog /US Ordering Information PTK Vacuum up ssemblies Installation Note: When installing cup assemblies, use a sealant material to secure the assembly and prevent vacuum leakage. Tube I.. listed below is a recommended minimum value, for that cup range, to optimize response time of the system. Your requirements may vary. Mounting Thread Tube I.. up Screw arbed ulkhead for P ups Vacuum ups PTK Vacuum up ssemblies Model Number Index (old Items are Stocked) PTK NR - up iameter Vacuum Port TK & TK itting up Screw Mounting Included in Kit (mm) ode Thread Part Number Only Thread Tube I up iameter (mm) 5 (5) 30 (30) 7 (7) 40 (40) 10 (10) 60 (60) 15 (15) 90 (90) 20 (20) (old Items are Stocked) up Material Stocked NR Nitrile Rubber SI Silicone vailable (onsult actory) NR Nitrile S R hloroprene U Urethane SI Silicone S KM louro Rubber S igh Temp Vacuum Port lank arb N1 1/8 NPT 1 1/8 SPP R1 1/8 SPT See hart elow 5, 7 lank arb TK-5 N/ M9x1 Male.156 (4) 10, 15, 18, 20 lank arb TK-10 P-10-M5 M8x1.25 Male.156 (4) 30, 40, 60 lank arb TK-30 P-30-M8 M10x1.5 Male.156 (4) N1 1/8 NPT TK-90-N /8 SPP TK-90-1 P-90-M12 M16x1.5 Male N/ R1 1/8 SPT TK-90-R1 70 Parker annifin orporation ivision
69 atalog /US imensions imensions PTK-5 and PTK-7 PTK ia. Ø (5) M9x1.0 SW12 M16x1.5 SW21 N1: 1/8 NPT 1: 1/8 SPP R1: 1/8 SPT.098 ia. Ø (2.5) N1: 1/8 NPT 1: 1/8 SPP R1: 1/8 SPT PTK-10 thru PTK ia. Ø (5) M8x1.25 SW12 Vacuum ups PTK Vacuum up ssemblies.118 ia. Ø (3) PTK-30 thru PTK -60 Model Wt Ø Number oz. (g) PTK-5-*.20 (5) 1.32 (33.5).39 (10).55 (14).12 (3).47 (12).12 (3).56 (11) PTK-7-*.28 (7) 1.34 (34).39 (10).55 (14).12 (3).47 (12).12 (3).56 (11) PTK-10-*.35 (9) 2.21 (56.2).63 (16).88 (22.5).12 (3).59 (15).16 (4).78 (22) PTK-15-*.60 (15.2) 2.53 (64.2).63 (16).86 (22).39 (10).59 (15).16 (4).78 (22) PTK-20-*.79 (20) 2.53 (64.2).63 (16).86 (22).39 (10).59 (15).16 (4).78 (22) PTK-30-* 1.26 (32) 3.42 (86.8).63 (16) 1.26 (32).57 (14.5).79 (20).20 (5) 1.62 (46) PTK-40-* 1.65 (42) 3.75 (95.3).63 (16) 1.26 (32).86 (22).79 (20).20 (5) 1.94 (55) PTK-60-* 2.44 (62) 4.11 (104.3).63 (16) 1.26 (32) 1.06 (27).79 (20).20 (5) 3.00 (85) PTK-90-* (88) 5.70 (144.8) 1.67 (42.5) 1.65 (42).91 (23).24 (6) (300) * up Material Vacuum Port.197 ia. Ø (5) M10x1.5 M5x0.8 SW ia. Ø (3) 71 Parker annifin orporation ivision
70 atalog /US Ordering Information PYK Vacuum up ssemblies Installation Note: When installing cup assemblies, use a sealant material to secure the assembly and prevent vacuum leakage. Tube I.. listed below is a recommended minimum value, for that cup range, to optimize response time of the system. Your requirements may vary. Mounting Thread Tube I.. up Screw 90 arbed dapter for P ups Vacuum ups PYK Vacuum up ssemblies Model Number Index (old Items are Stocked) PYK NR - up iameter Vacuum Port YK & YK itting up Screw Mounting Included in Kit (mm) ode Thread Part Number Only Thread Tube I up iameter (mm) 5 (5) 30 (30) 7 (7) 40 (40) 10 (10) 60 (60) 15 (15) 90 (90) 20 (20) (old Items are Stocked) up Material Stocked NR Nitrile Rubber SI Silicone vailable (onsult actory) NR Nitrile S R hloroprene U Urethane SI Silicone S KM louro Rubber S igh Temp Vacuum Port lank arb N1 1/8 NPT 1 1/8 SPP R1 1/8 SPT See hart elow 5, 7 lank arb YK-5 N/ M4x0.7 emale.156 (4) 10, 15, 20 lank arb YK-10 P-10-M5 M4x0.7 emale.156 (4) 30, 40, 60 lank arb YK-30 P-30-M8 M6x1.0 emale.156 (4) N1 1/8 NPT YK-90-N /8 SPP YK-90-1 P-90-M12 M16x1.5 emale N/ R1 1/8 SPT YK-90-R1 72 Parker annifin orporation ivision
71 atalog /US imensions imensions PYK-5 and PYK ia. Ø (5) PYK-30 thru PYK ia. Ø (3).197 ia. Ø (5).118 ia. Ø (3) M4x0.7 M6x1.0 Vacuum ups PYK Vacuum up ssemblies PYK-10 thru PYK-20 PYK ia. Ø (5).118 ia. Ø (3) M16x1.5 SW21 N1: 1/8 NPT 1: 1/8 SPP R1: 1/8 SPT Model Wt Ø Number oz. (g) PYK-5-*.20 (5) 1.26 (32).51 (13).89 (22.5).12 (3).24 (6).63 (16).56 (16) PYK-7-*.28 (7) 1.28 (32.5).51 (13).89 (22.5).12 (3).24 (6).63 (16).56 (16) PYK-10-*.35 (9) 1.58 (40.2).55 (14).87 (22).12 (3).24 (6).63 (16).78 (22) PYK-15-*.60 (15.2) 1.90 (48.2).55 (14).87 (22).39 (10).24 (6).63 (16).78 (22) PYK-20-*.79 (20) 1.90 (48.2).55 (14).87 (22).39 (10).24 (6).63 (16).78 (22) PYK-30-* 1.26 (32) 2.79 (70.8).79 (20) 1.26 (32).57 (14.5).31 (8).63 (16) 1.62 (46) PYK-40-* 1.65 (42) 3.12 (79.3).79 (20) 1.26 (32).87 (22).31 (8).63 (16) 1.94 (55) PYK-60-* 2.44 (62) 3.48 (88.3).79 (20) 1.26 (32) 1.06 (27).31 (8).63 (16) 3.00 (85) PYK-90-* 3.46 (88) 5.70 (144.8).91 (23) 2.17 (55) 1.65 (42).43 (11) (300) * up Material Thread Size M4x0.7 N1: 1/8 NPT 1: 1/8 SPP R1: 1/8 SPT 73 Parker annifin orporation ivision
72 atalog /US eatures PK utomotive Vacuum ups PK Series Vacuum ups The PK is a single edge deep cup for products with a radius. The PK is a single lip design with a grooved foot pattern to prevent vacuum from deforming thin products. The PKJ is a single bellow cup designed to work with flexible and curved products. ll of these designs incorporate a grooved and textured underside to increase frictional and holding forces. The cup assembly has a variety of connector designs to replace only the cup to minimize operating expenses. PK emale dapter Series Simple female connection for low profile positions secured to a plate or bracket. Male screw to secure cup has an internal hex for easy assembly. itting Material: luminum. PKT dapter Series Simple adapter connection for low profile positions secured to a plate or bracket. Male screw to secure cup has an internal hex for easy assembly. itting Material: luminum. O-Ring-210 una. PK emale dapter Series Simple female connection for low profile positions secured to a plate or bracket. Male screw to secure cup has an internal hex for easy assembly. itting Material: luminum. Vacuum ups PK Vacuum ups eatures lat esign To Prevent eforming Product up Replacement Simplied Recyclable Rubber Lower Maintenace ost Soft urometers Silicon ree 40mm to 110mm iameters pplications The PK ups are well suited for all operations within automotive manufacturing; sheet metal destack, body assembly, press transfer, final assembly, fixtures. PKT dapter Series Simple adapter connection for low profile positions secured to a plate or bracket. Male screw to secure cup has an internal hex for easy assembly. itting Material: luminum. O-Ring-210 una. PKJ emale dapter Series Simple female connection for low profile positions secured to a plate or bracket. Male screw to secure cup has an internal hex for easy assembly. itting Material: luminum. PKJT dapter Series Simple adapter connection for low profile positions secured to a plate or bracket. Male screw to secure cup has an internal hex for easy assembly. itting Material: luminum. O-Ring-210 una. 74 Parker annifin orporation ivision
73 atalog /US Ordering Information Vacuum ups PK, PK, PKJ Vacuum ups Model Number Index (ups Only) ( old Items are Stocked) PK NR PK NR up iameter (mm) 60 (60) 75 (75) 100 (100) PK Specifications up Material Stocked NR Nitrile Rubber vailable (onsult actory) U Urethane Suction up NR U Material Nitrile Urethane Operating Temperature ( ) to +120 to +120 olor lack lue PK ardness, 55 ±5 55 ±5 Shore ( Sh) Wear Tear Strength ging Ozone asoline Oil cid lkali hemical Mechanical = excellent; = very good; = good; = medium; = poor; = not recommended up iameter (mm) 75 (75) 100 (100) up Material Stocked NR Nitrile Rubber vailable (onsult actory) U Urethane PKJ NR up iameter (mm) 40 (40) 50 (50) 60 (60 80 (80) 110 (110) PKJ up Material Stocked NR Nitrile Rubber vailable (onsult actory) U Urethane 75 Parker annifin orporation ivision
74 atalog /US pplications & Technical ata pplication uide eep up for xternal urves Slip Resistant oot Pattern Main ata for PKJ Suction ups Vacuum ups PK, PK, PKJ Vacuum ups Lifting 60% (N) up Radius Model up iameter rea Volume (V) eflection (S) R Number cm 2 Liters (mm) (mm) PK-60-* 2.36 (60) PK-75-* 2.95 (75) PK-100-* 3.94 (100) PK-75-* 2.95 (75) PK-100-* 3.94 (100) PKJ-40-* 1.57 (40) PKJ-50-* 1.98 (50) PKJ-60-* 2.36 (60) PKJ-80-* 3.15 (80) PKJ-110-* 4.33 (110) * up Material PK Main ata for PK Suction ups Volume Volume V V Main ata for PK Suction ups Volume V No eformation Thin lat Sheets Slip Resistant oot Pattern PK up eflection S up eflection S up eflection S ellows for ny urves Slip Resistant oot Pattern PKJ Radius R Radius R Radius R 76 Parker annifin orporation ivision
75 atalog /US imensions imensions PK-60 thru PK-100 PK-100 Model Number * up Material Vacuum ups PK, PK, PKJ Vacuum ups PK-75 PKJ-40 thru PKJ-110 Ø Ø Ø Ø PK-60-* 2.36 (60).73 (18.5) 1.10 (28) 1.57 (40) 1.22 (31).35 (9).12 (3).35 (9) PK-75-* 2.95 (75).73 (18.5) 1.10 (28) 1.57 (40) 1.26 (32).51 (13).12 (3).35 (9) PK-100-* 3.94 (100).73 (18.5) 1.10 (28) 1.57 (40) 1.54 (39).68 (17.3).16 (4).35 (9) PK-75-* 2.95 (75).73 (18.5) 1.10 (28) 1.57 (40) 1.26 (32).20 (5).12 (3).35 (9) PK-100-* 3.94 (100).73 (18.5) 1.10 (28) 1.57 (40) 1.54 (39).31 (8).16 (4).35 (9) PKJ-40-* 1.57 (40).73 (18.5) 1.10 (28) 1.57 (40) 1.38 (35).41 (10.5).37 (9.5) PKJ-50-* 1.98 (50).73 (18.5) 1.10 (28) 1.57 (40) 1.38 (35).75 (19).35 (9) PKJ-60-* 2.36 (60).73 (18.5) 1.10 (28) 1.57 (40) 1.38 (35).55 (14).35 (9) PKJ-80-* 3.15 (80).73 (18.5) 1.10 (28) 1.57 (40) 1.54 (39).67 (17).35 (9) PKJ-110-* 4.33 (110).73 (18.5) 1.10 (28) 1.57 (40) 1.98 (50).91 (23).35 (9) 77 Parker annifin orporation ivision
76 atalog /US Ordering Information & imensions PK Vacuum up ssemblies Installation Note: When installing cup assemblies, use a sealant material to secure the assembly and prevent vacuum leakage. emale dapter for PK ups PK-60 thru PK-100 Model Number Ø PK-60-* (60) 1.85 (46.9) 1.10 (28) 1.81 (46).35 (9) PK-75-* (75) 1.88 (47.8) 1.10 (28) 1.81 (46).51 (13) PK-100-* (100) 2.16 (54.9) 1.10 (28) 1.81 (46).68 (17.3) * up Material Thread Size Vacuum ups PK Vacuum up ssemblies up iameter (mm) 60 (60) 75 (75) 100 (100) dapter omponents dapter Part Numbers Thread Sizes escription TN-PK--N3 emale 3/8 NPT emale Port TN-PK--3 3/8 SPP emale Port ap TN-PK-100-M10 M10x1.5 Male Screw PK ap Male imensions Pipe I.. Mounting Thread Model Number Index (old Items are Stocked) PK NR - N3 Note: Simply remove the hex keyed male screw to replace cup. ex Key Size: 8mm (old Items are Stocked) up Material Stocked NR Nitrile Rubber vailable (onsult actory) U Urethane (lat) Mounting Thread N3 3/8 NPS 3 3/8 SPP 78 Parker annifin orporation ivision
77 atalog /US Ordering Information & imensions PKT Vacuum up ssemblies Installation Note: When installing cup assemblies, use a sealant material to secure the assembly and prevent vacuum leakage. dapter for PK ups imensions PKT-60 and PKT-100 Model Number Vacuum ups PKT Vacuum up ssemblies Model Number Index (old Items are Stocked) PKT NR TN-PK-T dapter / O-ring dapter PK ap TN-PK-100-M10 ap M10x1.5 Male Screw Male (Square) Ø PKT-60-* 2.36 (60) 1.33 (34) 1.10 (28) 1.81 (46).04 (1.1) PKT-75-* 2.95 (75) 1.38 (35) 1.10 (28) 1.81 (46).04 (1.1) PKT-100-* 3.94 (100) 1.65 (42) 1.10 (28) 1.81 (46).05 (1.3) * up Material (old Items are Stocked) Note: Simply remove the hex keyed male screw to replace cup. ex Key Size: 8mm up iameter (mm) 60 (60) 75 (75) 100 (100) dapter omponents dapter Part Numbers Thread Sizes escription up Material Stocked NR Nitrile Rubber vailable (onsult actory) U Urethane 79 Parker annifin orporation ivision
78 atalog /US Ordering Information & imensions PK Vacuum up ssemblies Installation Note: When installing cup assemblies, use a sealant material to secure the assembly and prevent vacuum leakage. emale dapter for PK ups imensions PK-75 thru PK-100 Pipe I.. Mounting Thread Model Number Ø PK-75-* (40) 1.91 (48.5) 1.10 (28) 1.81 (46).20 (5) PK-100-* (50) 2.19 (55.5) 1.10 (28) 1.81 (46).31 (8) * up Material Thread Size Vacuum ups PK Vacuum up ssemblies Model Number Index (old Items are Stocked) PK NR - N3 up iameter (mm) 75 (75) 100 (100) Note: Simply remove the hex keyed male screw to replace cup. ex Key Size: 8mm (old Items are Stocked) dapter omponents dapter Part Numbers Thread Sizes escription TN-PK--N3 emale 3/8 NPT emale Port TN-PK--3 3/8 SPP emale Port ap TN-PK-100-M10 M10x1.5 Male Screw PK ap Male up Material Stocked NR Nitrile Rubber vailable (onsult actory) U Urethane Mounting Thread N3 3/8 NPS 3 3/8 SPP 80 Parker annifin orporation ivision
79 atalog /US Ordering Information & imensions PKT Vacuum up ssemblies Installation Note: When installing cup assemblies, use a sealant material to secure the assembly and prevent vacuum leakage. dapter for PK ups imensions PKT-75 thru PKT-10 Model Number Ø PKT-75-* 1.57 (40) 1.38 (35) 1.10 (28) 1.81 (46).20 (5) PKT-100-* 1.97 (50) 1.65 (42) 1.10 (28) 1.81 (46).31 (8) * up Material Vacuum ups PKT Vacuum up ssemblies Model Number Index (old Items are Stocked) PKT NR Note: Simply remove the hex keyed male screw to replace cup. ex Key Size: 8mm dapter omponents dapter Part Numbers Thread Sizes escription dapter ap Male (old Items are Stocked) up iameter (mm) 75 (75) 100 (100) TN-PK-T dapter / O-ring PK ap TN-PK-100-M10 M10x1.5 Male Screw up Material Stocked NR Nitrile Rubber vailable (onsult actory) U Urethane (Square) 81 Parker annifin orporation ivision
80 atalog /US Ordering Information & imensions PKJ Vacuum up ssemblies Installation Note: When installing cup assemblies, use a sealant material to secure the assembly and prevent vacuum leakage. emale dapter for PK ups imensions PKJ-75 thru PKJ-100 Pipe I.. Mounting Thread Model Number Ø PKJ-40-* (40) 2.03 (51.5) 1.10 (28) 1.81 (46).41 (10.5) PKJ-50-* (50) 2.03 (51.5) 1.10 (28) 1.81 (46).75 (19) PKJ-60-* (60) 2.03 (51.5) 1.10 (28) 1.81 (46).55 (14) PKJ-80-* (80) 2.19 (55.5) 1.10 (28) 1.81 (46).67 (17) PKJ-110-* (110) 2.62 (66.5) 1.10 (28) 1.81 (46).91 (23) * up Material Thread Size Vacuum ups PKJT Vacuum up ssemblies Model Number Index (old Items are Stocked) PKJ NR - N3 up iameter (mm) 40 (40) 50 (50) 60 (60) 80 (80) 110 (110) Note: Simply remove the hex keyed male screw to replace cup. ex Key Size: 8mm (old Items are Stocked) dapter omponents dapter Part Numbers Thread Sizes escription TN-PK--N3 emale 3/8 NPT emale Port TN-PK--3 3/8 SPP emale Port ap TN-PK-100-M10 M10x1.5 Male Screw PK ap Male up Material Stocked NR Nitrile Rubber vailable (onsult actory) U Urethane Mounting Thread N3 3/8 NPS 3 3/8 SPP 82 Parker annifin orporation ivision
81 atalog /US Ordering Information & imensions PKJT Vacuum up ssemblies Installation Note: When installing cup assemblies, use a sealant material to secure the assembly and prevent vacuum leakage. dapter for PKJ ups imensions PKJT-40 thru PKJT-110 Model Number Vacuum ups PKJT Vacuum up ssemblies Model Number Index (old Items are Stocked) PKJT NR dapter TN-PK-T dapter / O-ring PK ap ap TN-PK-100-M10 M10x1.5 Male Screw Male (Square) Ø PKJT-40-* 1.57 (40) 1.50 (38) 1.10 (28) 1.81 (46).41 (10.5) PKJT-50-* 1.97 (50) 1.50 (38) 1.10 (28) 1.81 (46).75 (19) PKJT-60-* 2.23 (60) 1.50 (38) 1.10 (28) 1.81 (46).55 (14) PKJT-80-* 3.15 (80) 1.65 (42) 1.10 (28) 1.81 (46).67 (17) PKJT-110-* 4.33 (110) 2.09 (53) 1.10 (28) 1.81 (46).91 (23) * up Material (old Items are Stocked) up iameter (mm) 40 (40) 50 (50) 60 (60) 80 (80) 110 (110) Note: Simply remove the hex keyed male screw to replace cup. ex Key Size: 8mm dapter omponents dapter Part Numbers Thread Sizes escription up Material Stocked NR Nitrile Rubber vailable (onsult actory) U Urethane 83 Parker annifin orporation ivision
82 atalog /US eatures PU lat Swivel Vacuum ups PU Series Vacuum ups 30 inclusive swivel, single lip cup for smooth, slightly curved surfaces and flexible products. Rigid construction provides good stability against acceleration and deceleration forces during product transfer. PUTK Series arbed ulkhead Top stem connectors secured with jam nuts and allow tubing connections at the top side. Nickel plated brass materials. PUYK Series 90 arbed dapter Side stem connectors allow you to secure the stem with a bolt thru a plate or L bracket to allow the tube connection from the side port. Nickel plated brass materials. Vacuum ups PU Vacuum ups eatures Internal Swivel Joint esign 30 Inclusive ngle for lexible Products Increased Stability for orizontal Lifts Lower Maintenance osts 10mm to 200mm iameters pplications The single edge swivel cup is for smooth surfaces with slightly curved surfaces or flexible sheets with substantial weights. Typically, lift capacities and break away forces are higher for flat cups which may be necessary for good stability during lift and transfer. The position of the internal swivel joint minimizes moments during lift and transfer. The swivel joint compensates for load and angular misalignment instead of the cup material, prolonging cup life. Maintenance costs are minimized by replacing only the cup portion of the assembly. PUTYS Series ulkhead Level ompensator 303 stainless steel construction secured with jam nuts. Spring biased compensators can absorb impacts of down-strokes and adjust for different levels of pick up points. 303 stainless corrosion resistant materials with drymet bushings increases the strength and life. 84 Parker annifin orporation ivision
83 atalog /US Ordering Information Model Number Index (ups Only) (old Items are Stocked) PU NR up iameter (mm) 10 (10) 50 (50) 15 (15) 60 (60) 20 (20) 80 (80) 25 (25) 100 (100) 30 (30) 120 (120) 35 (35) 150 (150) 40 (40) 200 (200) PU up Specifications up Material Stocked NR Nitrile Rubber SI Silicone vailable (onsult actory) R hloroprene U Urethane KM louro Rubber S igh Temp Vacuum ups PU Vacuum ups Model Number Index (old Items are Stocked) PU NR up iameter (mm) 10 (10) 50 (50) 15 (15) 60 (60) 20 (20) 80 (80) 25 (25) 100 (100) 30 (30) 120 (120) 35 (35) 150 (150) 40 (40) 200 (200) PU ssembly up Material Stocked NR Nitrile Rubber SI Silicone vailable (onsult actory) R hloroprene U Urethane KM louro Rubber S igh Temp NR NR R SI SI U KM S Suction up Nitrile Silicone louro Silicone Material Nitrile hloroprene Silicone Urethane S* S* Rubber igh Temp Operating Temperature ( ) to +120 to +120 to +140 to +250 to +250 to +120 to +230 to +300 lack / lack / lack / olor lack reen White lue rey lue ot Red ot White ot ardness, 55 ±5 70 ±5 55 ±5 55 ±5 55 ±5 55 ±5 70 ±5 55 ±5 Shore ( Sh) lectrical (Ωm) to 1000 to 1000 Wear Tear Strength ging Ozone asoline Oil cid lkali hemical Mechanical = excellent; = very good; = good; = medium; = poor; = not recommended * S: lectric Static issipative Material 85 Parker annifin orporation ivision
84 atalog /US pplications & Technical ata pplication uide Swivel ellows ngles Pickup Main ata for Swivel ellows PU ups Vacuum ups PU Vacuum ups Lifting 60% (N) up Radius Model up iameter rea Volume (V) eflection (S) R Number cm 2 Liters mm (mm) PU-10-*.39 (10) PU-15-*.59 (15) PU-20-*.79 (20) PU-25-*.98 (25) PU-30-* 1.18 (30) PU-35-* 1.38 (35) PU-40-* 1.57 (40) PU-50-* 1.57 (40) PU-60-* 2.36 (60) PU-80-* 3.15(80) PU-100-* 3.94 (100) PU-120-* 4.72 (120) PU-150-* 5.91 (150) PU-200-* 7.87 (200) * up Material Mounting Thread 15 Max. Tube I.. Volume V Mounting Thread Tube I.. up eflection ixtures for urved Product S Mounting Thread Tube I.. Radius R 86 Parker annifin orporation ivision
85 atalog /US imensions imensions PU-10 and PU-15 PU-60 thru PU-100 M12x1.25 SW19 Model Number * up Material M4x0.7 SW7 SW PU-200 PU-20 thru PU-35 M20x1.5 SW30 SW17 30 Vacuum ups PU Vacuum ups PU-120 thru PU-150 PU-40 and PU-50 Ø Ø Ø PU-10-*.39 (10).07 (1.8).20 (5).22 (5.5).79 (20).04 (1).20 (5) PU-15-*.59 (15).07 (1.8).24 (6).22 (5.5).83 (21).06 (1.4).20 (5) PU-20-*.79 (20).09 (2.3).35 (9).24 (6) 1.10 (28).08 (2).356 (9.05).41 (10.5) PU-25-*.98 (25).09 (2.3).37 (9.5).24 (6) 1.12 (28.5).10 (2.5).356 (9.05).41 (10.5) PU-30-* 1.18 (30).09 (2.3).39 (10).24 (6) 1.14 (29).08 (2).356 (9.05).41 (10.5) PU-35-* 1.38 (35).09 (2.3).43 (11).24 (6) 1.18 (30).12 (3).356 (9.05).41 (10.5) PU-40-* 1.57 (40).12 (3.0).43 (11).28 (7) 1.46 (37).12 (3).474 (12.05).49 (12.5) PU-50-* 1.97 (50).12 (3.0).47 (12).28 (7) 1.50 (38).15 (4).474 (12.05).49 (12.5) PU-60-* 2.36 (60).15 (3.9).63 (16).35 (9) 2.05 (52).20 (5).59 (15).28 (7) PU-80-* 3.15 (80).15 (3.9).71 (18).35 (9) 2.13 (54).24 (6).59 (15).28 (7) PU-100-* 3.94 (100).15 (3.9).71 (18).35 (9) 2.13 (54).24 (6).59 (15).28 (7) PU-120-* 4.72 (120).23 (5.9).91 (23).51 (13) 2.87 (73).31 (8).79 (20).39 (10) PU-150-* 5.91 (150).23 (5.9).98 (25).51 (13) 2.95 (75).39 (10).79 (20).39 (10) PU-200-* 7.87 (200).31 (7.9) 1.14 (29).63 (16) 3.35 (85).47 (12).79 (20).47 (12) 30 M16x1.5 SW24 SW Parker annifin orporation ivision
86 atalog /US Ordering Information PUTK Vacuum up ssemblies Installation Note: When installing cup assemblies, use a sealant material to secure the assembly and prevent vacuum leakage. Tube I.. listed below is a recommended minimum value, for that cup range, to optimize response time of the system. Your requirements may vary. Mounting Thread Tube I.. arbed ulkhead for PU ups Vacuum ups PUTK Vacuum up ssemblies Model Number Index (old Items are Stocked) PUTK NR - up iameter (mm) 10 (10) 50 (50) 15 (15) 60 (60) 20 (20) 80 (80) 25 (25) 100 (100) 30 (30) 120 (120) 35 (35) 150 (150) 40 (40) 200 (200) up Material Stocked NR Nitrile Rubber SI Silicone vailable (onsult actory) R hloroprene U Urethane KM louro Rubber S igh Temp Vacuum Port lank arb N1 1/8 NPT 1 1/8 SPP R1 1/8 SPT N2 1/4 NPT 2 1/4 SPP R2 1/4 SPT See hart elow (old Items are Stocked) up iameter Vacuum Port Mounting UTK itting Included in Kit (mm) ode Thread Thread Part Number Tube I 10, 15 lank arb M8x1.25 Male UTK (4) 20, 25, 30, 35 lank arb M10x1.5 Male UTK (4) 40, 50 lank arb M14x1.5 Male UTK (4) N1 1/8 NPT UTK-60-N1 60, 80, /8 SPP M16x1.5 Male UTK-60-1 N/ R1 1/8 SPT UTK-60-R1 N1 1/8 NPT UTK-120-N1 120, /8 SPP M22x1.5 Male UTK N/ R1 1/8 SPT UTK-120-R1 N2 1/4 NPT UTK-200-N /4 SPP M22x1.5 Male UTK N/ R2 1/4 SPT UTK-200-R2 88 Parker annifin orporation ivision
87 atalog /US imensions imensions PUTK-10 and PUTK-15 PUTK-60 thru PUTK-100 M16x1.5 SW21 N1: 1/8 NPT 1: 1/8 SPP R1: 1/8 SPT Plug SW19 Model Number Vacuum ups PUTK Vacuum up ssemblies PUTK-40 and PUTK-50 Ø Wt oz (g) PUTK-10-*.39 (10) 2.20 (56).63 (16).35 (9).04 (1).63 (16).15 (4).15 (4).7 (20) PUTK-15-*.59 (15) 2.24 (57).63 (16).35 (9).06 (1.4).63 (16).15 (4).15 (4).7 (20) PUTK-20-*.79 (20) 2.76 (70).63 (16).71 (18).08 (2).79 (20).20 (5).51 (13) 2.3 (66) PUTK-25-*.98 (25) 2.78 (70.5).63 (16).71 (18).10 (2.5).79 (20).20 (5).53 (13.5) 2.3 (66) PUTK-30-* 1.18 (30) 2.80 (71).63 (16).71 (18).08 (2).79 (20).20 (5).55 (14) 2.5 (71) PUTK-35-* 1.38 (35) 2.83 (72).63 (16).71 (18).12 (3).79 (20).20 (5).59 (15) 2.5 (71) PUTK-40-* 1.57 (40) 3.03 (77).63 (16).91 (23).12 (3).79 (20).20 (5).43 (11) 4.2 (118) PUTK-50-* 1.97 (50) 3.07 (78).63 (16).91 (23).15 (4).79 (20).20 (5).47 (12) 4.3 (121) PUTK-60-* 2.36 (60) 3.66 (93).63 (16) 1.89 (48).20 (5).91 (23).24 (6).63 (16) 12.4 (352) PUTK-80-* 3.74 (80) 3.74(95) 1.38 (35) 2.16 (55).24 (6).91 (23).24 (6).71 (18) 15.7 (444) PUTK-100-* 3.94 (100) 3.74 (95) 1.38 (35) 2.16 (55).24 (6).91 (23).24 (6).71 (18) 20.0 (568) PUTK-120-* 4.72 (120) 5.04 (128) 1.81 (46) 2.95 (75).37 (8) 1.26 (32).37 (8).91 (23) 34.0 (63) PUTK-150-* 5.91 (150) 5.12 (130) 1.81 (46) 2.95 (75).39 (10) 1.26 (32).37 (8).98 (25) 41.0 (1107) PUTK-200-* 7.87 (200) 5.51 (140) 1.81 (46) 2.80 (71).47 (12) 1.26 (32).37 (8) 1.14 (29) 83.0 (2340) * up Material.197 ia. Ø (5) M8x1.25 SW ia. Ø (3) N1: 1/8 NPT 1: 1/8 SPP R1: 1/8 SPT PUTK-20 thru PUTK ia. Ø (5) M10x1.5 SW14 SW17 SW17 30 PUTK-120 thru PUTK-150 N1: 1/8 NPT 1: 1/8 SPP R1: 1/8 SPT M22x1.5 SW27 Plug SW27 SW ia. Ø (3) N1: 1/8 NPT 1: 1/8 SPP R1: 1/8 SPT PUTK-200 N2: 1/4 NPT 2: 1/4 SPP R2: 1/4 SPT M22x1.5 SW27 Plug SW27 SW ia. Ø (5) M14x1.5 M5x0.8 SW17 SW19 SW ia. Ø (3) 30 N2: 1/4 NPT 2: 1/4 SPP R2: 1/4 SPT 89 Parker annifin orporation ivision
88 atalog /US Ordering Information PUYK Vacuum up ssemblies Installation Note: When installing cup assemblies, use a sealant material to secure the assembly and prevent vacuum leakage. Tube I.. listed below is a recommended minimum value, for that cup range, to optimize response time of the system. Your requirements may vary. Mounting Thread Tube I.. 90 arbed dapter for PU ups Vacuum ups PUYK Vacuum up ssemblies PUYK NR - up iameter Vacuum Port Mounting UYK itting Included in Kit (mm) ode Thread Thread Part Number Tube I Model Number Index (old Items are Stocked) up iameter (mm) 10 (10) 50 (50) 15 (15) 60 (60) 20 (20) 80 (80) 25 (25) 100 (100) 30 (30) 120 (120) 35 (35) 150 (150) 40 (40) 200 (200) (old Items are Stocked) up Material Stocked NR Nitrile Rubber SI Silicone vailable (onsult actory) R hloroprene U Urethane KM louro Rubber S igh Temp 10, 15 lank arb M4x0.7 emale UYK (4) 20, 25, 30, 35 lank arb M6x1 emale UYK (4) 40, 50 lank arb M8x1.25 emale UYK (4) N1 1/8 NPT UTK-60-N1 60, 80, /8 SPP M16x1.5 Male UTK-60-1 N/ R1 1/8 SPT UTK-60-R1 N1 1/8 NPT UTK-120-N1 120, /8 SPP M22x1.5 Male UTK N/ R1 1/8 SPT UTK-120-R1 N2 1/4 NPT UTK-200-N /4 SPP M22x1.5 Male UTK N/ R2 1/4 SPT UTK-200-R2 Vacuum Port lank arb N1 1/8 NPT 1 1/8 SPP R1 1/8 SPT N2 1/4 NPT 2 1/4 SPP R2 1/4 SPT See hart elow 90 Parker annifin orporation ivision
89 atalog /US imensions imensions PUYK-10 thru PUYK ia. Ø (5).118 ia. Ø (3) SW7 SW12 30 PUYK-60 thru PUYK-100 Plug M16x1.5 SW21 N1: 1/8 NPT 1: 1/8 SPP R1: 1/8 SPT SW19 30 M4X0.7 SW10 N1: 1/8 NPT 1: 1/8 SPP R1: 1/8 SPT SW27 N1: 1/8 NPT 1: 1/8 SPP R1: 1/8 SPT PUYK-20 thru PUYK ia. Ø (5) Plug M22x1.5 Plug SW27 SW ia. Ø (3) SW17 PUYK-120 thru PUYK Vacuum ups PUYK Vacuum up ssemblies N1: 1/8 NPT 1: 1/8 SPP R1: 1/8 SPT Model Wt Ø Number oz (g) PUYK-10*.39 (10) 1.44 (36.5).55 (14).89 (22.5).04 (1).24 (6).83 (21).20 (5).7 (20) PUYK-15-*.59 (15) 1.48 (37.5).55 (14).78 (22.5).06 (1.4).24 (6).83(21).20 (5).7 (20) PUYK-20-*.79 (20) 1.93 (49).63 (16) 1.30 (33).08 (2).31 (8).96 (24.5).35 (9) 2.3 (66) PUYK-25-*.98 (25) 1.95 (49.5).63 (16) 1.30 (33).10 (2.5).31 (8).96 (24.5).37 (9.5) 2.3 (66) PUYK-30-* 1.18 (30) 1.97 (50).63 (16) 1.30 (33).08 (2).31 (8).96 (24.5).39 (10) 2.6 (73) PUYK-35-* 1.38 (35) 2.01 (51).63 (16) 1.30 (33).12 (3).31 (8).96 (24.5).43 (11) 2.6 (73) PUYK-40-* 1.57 (40) 2.32 (59).71 (18) 1.50 (38).12 (3).39 (10) 1.00 (25.5).43 (11) 4.0 (116) PUYK-50-* 1.97 (50) 2.36 (60).71 (18) 1.50 (38).15 (4).39 (10) 1.00 (25.5).47 (12) 4.1 (117) PUYK-60-* 2.36 (60) 3.66 (93) 1.38 (35) 2.16 (55).20 (5).91 (23).24 (6).63 (16) 12.4 (352) PUYK-80-* 3.74 (80) 3.74(95) 1.38 (35) 2.16 (55).24 (6).91 (23).24 (6).71 (18) 15.7 (444) PUYK-100-* 3.94 (100) 3.74 (95) 1.38 (35) 2.16 (55).24 (6).91 (23).24 (6).71 (18) 20.0 (568) PUYK-120-* 4.72 (120) 5.04 (128) 1.81 (46) 2.95 (75).37 (8) 1.26 (32).37 (8).91 (23) 34.0 (63) PUYK-150-* 5.91 (150) 5.12 (130) 1.81 (46) 2.95 (75).39 (10) 1.26 (32).37 (8).98 (25) 41.0 (1107) PUYK-200-* 7.87 (200) 5.51 (140) 1.81 (46) 3.11 (79).47 (12) 1.26 (32).37 (8) 1.14 (29) 83.0 (2340) * up Material M6x1 SW17 PUYK-40 and PUYK ia. Ø (5) PUYK-200 SW27 N2: 1/4 NPT 2: 1/4 SPP R2: 1/4 SPT.118 ia. Ø (3) SW19 Plug M22x1.5 SW27 SW M8x1.25 SW19 N2: 1/4 NPT 2: 1/4 SPP R2: 1/4 SPT 91 Parker annifin orporation ivision
90 atalog /US Ordering Information PUTYS Vacuum up ssemblies Installation Note: When installing cup assemblies, use a sealant material to secure the assembly and prevent vacuum leakage. Shown are interchangable connectors & plugs for port connections. ulkhead Level ompensator for PU ups Interchangable* Pushlock Tube itting Mounting Thread. Vacuum ups PUTYS Vacuum up ssemblies up iameter Stroke (mm) (mm) 10 (10) 3, 10, (15) 20 (20) 25 (25) 30 (30) 6, 15, (35) 40 (40) 50 (50) 60 (60) 80 (80) 30, 50, ) 120 (120) 150 (150) 20, (200) up iameter Vacuum Port UTYS ssembly 1 2 Included in Kit (mm) ode Thread Part Number Stroke lbf (N) lbf (N) UTYS mm M5X8 10, 15 M5 UTYS mm.11 (.49).13 (.59) emale UTYS mm 20, 25, 30, 35 M5 UTYS mm.56 (2.5).79 (3.4) M5x8 UTYS mm.56 (2.5) 1.2 (4.9) emale UTYS mm.67 (2.9) 1.4 (5.9) 40, 50 M5 UTYS mm.56 (2.5).79 (3.4) M5x8 UTYS mm.56 (2.5) 1.2 (4.9) emale UTYS mm.67 (2.9) 1.4 (5.9) 60, 80, 100 N1 120, 150 N2 200 N2 arb itting Plug * Not included with assembly 1/8 NPT emale Model Number Index (old Items are Stocked) PUTYS 10 3 NR M5 (old Items are Stocked) up Material Stocked NR Nitrile Rubber SI Silicone vailable (onsult actory) R hloroprene U Urethane KM louro Rubber S igh Temp ompression orce 1 0% of Stroke Vacuum Ports M5 M5 N1 1/8 NPT N2 1/4 NPT See hart elow 100% of Stroke UTYS mm 1.6 (6.8) 3.6 (15.6) UTYS mm 1.9 (8.3) 4.5 (19.6) UTYS mm 2.2 (9.5) 4.8 (21) 1/4 NPT UTYS mm 3.6 (15.6) 6.8 (29) emale UTYS mm 3.4 (14.7) 6.8 (29) 1/4 NPT UTYS mm 3.6 (15.6) 6.8 (29) emale UTYS mm 3.4 (14.7) 6.8 (29) 2 92 Parker annifin orporation ivision
91 atalog /US imensions imensions PUTYS103 thru PUTYS1515 M5x0.8 M8x0.75 SW12 M5x0.8 SW7 SW12 Model Number Vacuum ups PUTYS Vacuum up ssemblies Ø Wt oz (g) PUTYS103*.39 (10) 2.66 (67.5).73 (18.5).31 (8).04 (1).12 (3).12 (3).91 (23).88 (25) PUTYS1010*.39 (10) 2.93 (74.5).73 (18.5).31 (8).04 (1).39 (10).12 (3).91 (23).92 (26) PUTYS1015*.39 (10) 3.43 (87).73 (18.5).31 (8).04 (1).59 (15).12 (3) 1.20 (30.5).99 (28) PUTYS153*.59 (15) 2.70 (68.5).73 (18.5).31 (8).06 (1.4).12 (3).12 (3).91 (23).88 (25) PUTYS1510*.59 (15) 2.97 (75.5).73 (18.5).31 (8).06 (1.4).39 (10).12 (3).91 (23).92 (26) PUTYS1515*.59 (15) 3.46 (88).73 (18.5).31 (8).06 (1.4).59 (15).12 (3) 1.20 (30.5).99 (28) PUTYS206*.79 (20) 3.52 (89.5).63 (16).39 (10).08 (2).24 (6).20 (5) 1.42 (36) 3.1 (89) PUTYS2015*.79 (20) 3.88 (98.5).63 (16).39 (10).08 (2).59 (15).20 (5) 1.42 (36) 3.3 (94) PUTYS2030*.79 (20) 5.33 (135.5).63 (16).39 (10).08 (2) 1.18 (30).20 (5) 2.28 (58) 4.2 (119) PUTYS256*.79 (20) 3.54 (90).63 (16).39 (10).10 (2.5).24 (6).20 (5) 1.42 (36) 3.1 (89) PUTYS2515*.79 (20) 3.90 (99).63 (16).39 (10).10 (2.5).59 (15).20 (5) 1.42 (36) 3.3 (94) PUTYS2530*.79 (20) 5.35 (136).63 (16).39 (10).10 (2.5) 1.18 (30).20 (5) 2.28 (58) 4.2 (119) PUTYS306* 1.18 (30) 3.56 (90.5).63 (16).39 (10).08 (2).24 (6).20 (5) 1.42 (36) 3.3 (94) PUTYS3015* 1.18 (30) 3.92 (99.5).63 (16).39 (10).08 (2).59 (15).20 (5) 1.42 (36) 3.5 (99) PUTYS3030* 1.18 (30) 5.37 (136.5).63 (16).39 (10).08 (2) 1.18 (30).20 (5) 2.28 (58) 4.4 (124) PUTYS356* 1.18 (30) 3.60 (91.5).63 (16).39 (10).12 (3).24 (6).20 (5) 1.42 (36) 3.3 (94) PUTYS3515* 1.18 (30) 3.96 (100.5).63 (16).39 (10).12 (3).59 (15).20 (5) 1.42 (36) 3.5 (99) PUTYS3530* 1.18 (30) 5.41 (137.5).63 (16).39 (10).12 (3) 1.18 (30).20 (5) 2.28 (58) 4.4 (124) PUTYS406* 1.57 (40) 3.84 (97.5).67 (17).39 (10).12 (3).24 (6).20 (5) 1.42 (36) 4.3 (123) PUTYS4015* 1.57 (40) 4.19 (106.5).67 (17).39 (10).12 (3).59 (15).20 (5) 1.42 (36) 4.5 (128) PUTYS4030* 1.57 (40) 5.65 (143.5).67 (17).39 (10).12 (3) 1.18 (30).20 (5) 2.28 (58) 5.4 (153) PUTYS506* 1.97 (50) 3.88 (98.5).67 (17).39 (10).16 (4).24 (6).20 (5) 1.42 (36) 4.3 (123) PUTYS5015* 1.97 (50) 4.23 (107.5).67 (17).39 (10).16 (4).59 (15).20 (5) 1.42 (36) 4.5 (128) PUTYS5030* 1.97 (50) 5.69 (144.5).67 (17).39 (10).16 (4) 1.18 (30).20 (5) 2.28 (58) 5.4 (154) * up Material SW6.35 (9) PUTYS206 thru PUTYS3530 SW17 M5x0.8 M14x1 M5x0.8 SW12 SW19 SW17.20 (5) PUTYS406 thru PUTYS5030 SW19 SW17 SW17 M5x0.8 M14x1 M5x0.8 SW12.20 (5) 93 Parker annifin orporation ivision
92 atalog /US imensions imensions PUTYS6010 thru PUTYS10050 Model Number Vacuum ups PUTYS Vacuum up ssemblies Ø J Wt oz (g) PUTYS6030* 3.74 (60) 7.28 (185) 1.57 (40).79 (20).20 (5) 1.77 (45).39 (10) 1.97 (50).47 (12) 17.2 (487) PUTYS6050* 3.74 (60) 8.27 (210) 1.57 (40).79 (20).20 (5) 2.76 (70).39 (10) 1.97 (50).47 (12) 18.4 (521) PUTYS6070* 3.74 (60) 9.25 (235) 1.57 (40).79 (20).20 (5) 3.54 (90).39 (10) 1.97 (50).47 (12) 19.3 (548) PUTYS8030* 5.91 (80) 7.36 (187) 1.57 (40).79 (20).24 (6) 1.77 (45).39 (10) 1.97 (50).47 (12) 19.7 (559) PUTYS8050* 5.91 (80) 8.35 (212) 1.57 (40).79 (20).24 (6) 2.76 (70).39 (10) 1.97 (50).47 (12) 20.1 (595) PUTYS8070* 5.91 (80) 9.33 (237) 1.57 (40).79 (20).24 (6) 3.54 (90).39 (10) 1.97 (50).47 (12) 21.9 (620) PUTYS10030* 1.18 (30) 7.36 (187) 1.57 (40).79 (20).24 (6) 1.77 (45).39 (10) 1.97 (50).47 (12) 25.7 (729) PUTYS10050* 1.18 (30) 8.35 (212) 1.57 (40).79 (20).24 (6) 2.76 (70).39 (10) 1.97 (50).47 (12) 26.7 (756) PUTYS10070* 1.18 (30) 9.33 (237) 1.57 (40).79 (20).24 (6) 3.54 (90).39 (10) 1.97 (50).47 (12) 49.9 (1414) * up Material N1: 1/8 NPT M22x1.5 N1: 1/8 NPT SW19 30 SW19.28 (7) J SW30 SW22 94 Parker annifin orporation ivision
93 atalog /US imensions imensions PUTYS12020 thru PUTYS20070 Vacuum ups PUTYS Vacuum up ssemblies Model Wt Ø J Number oz. (g) PUTYS12020* 4.72 (120) 9.88 (251) 2.36 (60) 1.06 (27).31 (8) 1.38 (35).39 (10) 2.36 (60) 1.38 (35) 49.9 (1414) PUTYS12070* 4.72 (120) (316) 2.36 (60) 1.06 (27).31 (8) 3.94 (100).39 (10) 2.36 (60) 1.38 (35) 52.7 (1495) PUTYS15020* 4.72 (120) 9.96 (253) 2.36 (60) 1.06 (27).39 (10) 1.38 (35).39 (10) 2.36 (60) 1.38 (35) 57.8 (1640) PUTYS15070* 4.72 (120) (318) 2.36 (60) 1.06 (27).39 (10) 3.94 (100).39 (10) 2.36 (60) 1.38 (35) 60.7 (1721) PUTYS20020* 4.72 (120) (279) 2.36 (60) 1.06 (27).47 (12) 1.38 (35).39 (10) 2.36 (60) 1.38 (35) 98.1 (2780) PUTYS20070* 4.72 (120) (324) 2.36 (60) 1.06 (27).47 (12) 3.94 (100).39 (10) 2.36 (60) 1.38 (35) (2861) * up Material M30x1.5 N2: 1/4 NPT 120 & 150: SW : SW30 N2: 1/4 NPT SW26 SW36 SW30.31 (8) J 95 Parker annifin orporation ivision
94 atalog /US eatures PO rooved Vacuum ups PO Series Vacuum ups Special grooved flat cup with single lip provides increases vacuum flow area. Increased holding force resists against slipping of products with oily surfaces. Increased holding force also works well with corrugated product. POTM Series Male Thread onnector Simple male connection for low profile positions secured to a plate or bracket. UN, NPT,, SPT, metric threads. Internal hex for easy assembly. itting Material: luminum. POT Series emale Thread onnector Simple female connection for low profile positions secured to a plate or bracket. NPS, threads. Internal hex for easy assembly. itting Material: luminum. Vacuum ups PO Vacuum ups eatures Vacuum rooves On Underside Increases olding rea Resists cceleration and eceleration Shear Shear Is Increased y 25% 20mm to 40mm iameters pplications The anti-slip flat cups are for pick-and- place applications that require an increased holding force without having to increase the diameter of the cup. The grooved foot pattern channels the vacuum flow to the cup s outer diameter which increases resistance to the shear force by 25% over conventional flat pads. These cups are perfect for high speed press transfer of small to medium sized stamped metal products with oily surfaces. This cup also works well with corrugated product. POTK Series arbed ulkhead Top stem connectors secured with jam nuts and allow tubing connections at the top side. Nickel plated brass materials. POYK Series 90 arbed dapter Side stem connectors allow you to secure the stem with a bolt through a plate or L bracket to allow the tube connection from the side port. Nickel plated brass materials. POTYS Series ulkhead Level ompensator 303 stainless steel construction secured with jam nuts. Spring biased compensators can absorb impacts of down-strokes and adjust for different levels of pick up points. 303 stainless corrosion resistant materials with drymet bushings increases the strength and life. 96 Parker annifin orporation ivision
95 atalog /US Ordering Information Model Number Index (ups Only) (old Items are Stocked) Specifications Vacuum ups PO Vacuum ups PO NR up iameter (mm) 20 (20) 25 (25) 30 (30) 35 (35) 40 (40) Suction up NR U Material Nitrile Urethane Operating Temperature ( ) -20 to to +120 olor lack lue ardness, Shore ( Sh) Wear 55 ±5 55 ±5 Tear Strength ging Ozone asoline Oil cid lkali hemical Mechanical = excellent; = very good; = good; = medium; = poor; = not recommended up Material Stocked NR Nitrile Rubber vailable (onsult actory) U Urethane 97 Parker annifin orporation ivision
96 atalog /US pplications & imensions Selection uide nti-slip lat ups Increased olding rea for orrugated Main ata for nti-slip PO Suction ups PO-20 Volume V Vacuum ups PO Vacuum ups up eflection Lifting 60% (N) up Radius Model up iameter rea Volume (V) eflection (S) R Number cm 2 liters mm (mm) PO (20) PO (25) PO (30) PO (35) PO (40) imensions Resists Slipping gainst Oily Surfaces for Small Sheet Metal Transfer PO-25 thru PO-40 Model Number Ø Ø Ø Ø PO-20-*.79 (20).18 (4.6).43 (11).59 (15).39 (10).06 (1.5).18 (4.5) PO-25-*.98 (25).24 (6).43 (11).63 (16).55 (14).04 (1.1).28 (7) PO-30-* 1.18 (30).24 (6).43 (11).55 (14).47 (12).05 (1.3).28 (7) PO-35-* 1.37 (35).24 (6).43 (11).83 (21).47 (12).06 (1.6).28 (7) PO-40-* 1.57 (40).24 (6).43 (11).94 (24).55 (14).11 (2.8).28 (7) * up Material S Radius R 98 Parker annifin orporation ivision
97 atalog /US Ordering Information & imensions POTM Vacuum up ssemblies Male Threaded itting for PO ups Model Number Ø POTM-25-*-.98 (25).75 (19).31 (8).20 (5).04 (1.1) POTM-30-* (30).67 (17).31 (8).20 (5).05 (1.3) POTM-35-* (35).75 (19).31 (8).20 (5).06 (1.6) POTM-40-* (40).75 (19).31 (8).20 (5).11 (2.8) * up Material Thread Size Vacuum ups POTM Vacuum up ssemblies Model Number Index (old Items are Stocked) POTM NR - N1 up iameter (mm) 25 (25) 30 (30) 35 (35) 40 (40) Installation Note: When installing cup assemblies, use a sealant material to secure the assembly and prevent vacuum leakage. Mounting Tube I.. listed below is a Thread recommended minimum value, for that cup range, to optimize response time of the system. Your requirements may vary. Tube I.. up iameter Mounting Mounting TM itting Included in Kit (mm) Thread ode Thread Part Number Min. Tube I N1 1/8 NPT TM-20-N1 25, 30, 35, /8 SPP TM /4 SPP TM (4) M10 M10x1.25 TM-20-M10 imensions POTM-25-1/8 thru POTM-40-1/8 1/2" (old Items are Stocked) N1: 1/8 NPT 1: 1/8 SPP R1: 1/8 SPT M10: 10x1.25 up Material Stocked NR Nitrile Rubber vailable (onsult actory) U Urethane Mounting Thread N1 1/8 NPT 1 1/8 SPP M10 M10 2 1/4 SPP See hart elow 99 Parker annifin orporation ivision
98 atalog /US Ordering Information & imensions POT Vacuum up ssemblies Note: When installing cup assemblies, use a sealant material to secure the assembly and prevent vacuum leakage. Tube I.. listed below is a recommended minimum value, for that cup range, to optimize response time of the system. Your requirements may vary. emale Threaded itting for PO ups Model Number Ø POT-25-*-.98 (25) 1.10 (28).04 (1.1) POT-30-* (30) 1.02 (26).05 (1.3) POT-35-* (35) 1.10 (28).06 (1.6) POT-40-* (40) 1.10 (28).11 (2.8) * up Material Thread Size Vacuum ups POT Vacuum up ssemblies Model Number Index (old Items are Stocked) POT NR - N1 Installation Pipe I.. Mounting Thread Mounting Thread up iameter Mounting Mounting T itting Included in Kit (mm) Thread ode Thread Part Number Min. Tube I imensions POT-25-1/8 thru POT-40-1/8 N1 1/8 NPT T-20-N1 25, 30, 35, /8 SPP T (4) 2 1/4 SPP T /2" up iameter (mm) 25 (25) 30 (30) 35 (35) 40 (40) (old Items are Stocked) N1: 1/8 NPT 1: 1/8 SPP R1: 1/8 SPT up Material Stocked NR Nitrile Rubber vailable (onsult actory) U Urethane Mounting Thread N1 1/8 NPT 1 1/8 SPP 2 1/4 SPP See hart elow Tube I Parker annifin orporation ivision
99 atalog /US Ordering Information & imensions POTK Vacuum up ssemblies arbed ulkhead for PO ups Model Number Ø POTK-20-*.79 (20) 1.89 (48).63 (16).87 (22).07 (1.7).59 (15).20 (5) POTK-25-*.98 (25) 2.44 (62).63 (16) 1.26 (32).04 (1.1).79 (20).20 (5) POTK-30-* 1.18 (30) 2.36 (60).63 (16) 1.26 (32).05 (1.3).79 (20).20 (5) POTK-35-* 1.38 (35) 2.44 (62).63 (16) 1.26 (32).06 (1.6).79 (20).20 (5) POTK-40-* 1.57 (40) 2.44 (62).63 (16) 1.26 (32).11 (2.8).79 (20).20 (5) * up Material Vacuum ups POTK Vacuum up ssemblies Model Number Index (old Items are Stocked) POTK NR Installation Mounting Thread Tube I.. up iameter TK itting up Screw Mounting Included in Kit (mm) Part Number Only Thread Min. Tube I imensions POTK-20 Note: When installing cup assemblies, use a sealant material to secure the assembly and prevent vacuum leakage. Tube I.. listed below is a recommended minimum value, for that cup range, to optimize response time of the system. Your requirements may vary. 20 TK-20 P-20-M5 M8x (4) 25, 30, 35, 40 TK-25 P-25/40-M6 M10x1.5 emale.157 (4) M8x1.25 up Screw.197 ia. Ø (5) SW ia. Ø (3) up iameter (mm) 20 (20) 25 (25) 30 (30) 35 (35) 40 (40) (old Items are Stocked) POTK-25 thru POTK-40 M10x1.5 SW14 up Screw.197 ia. Ø (5) up Material Stocked NR Nitrile Rubber vailable (onsult actory) U Urethane.118 ia. Ø (3) 101 Parker annifin orporation ivision
100 atalog /US Ordering Information & imensions POYK Vacuum up ssemblies 90 arbed dapter for PO ups Model Number Ø POYK-20-*.79 (20) 1.30 (33).55 (14).87 (22).07 (1.7).39 (10).63 (16) POYK-25-*.98 (25) 1.81 (46).79 (20) 1.26 (32).04 (1.1).39 (10).63 (16) POYK-30-* 1.18 (30) 1.73 (44).79 (20) 1.26 (32).05 (1.3).39 (10).63 (16) POYK-35-* 1.38 (35) 1.73 (44).79 (20) 1.26 (32).06 (1.6).39 (10).63 (16) POYK-40-* 1.57 (40) 1.81 (46).79 (20) 1.26 (32).11 (2.8).39 (10).63 (16) * up Material Vacuum ups POYK Vacuum up ssemblies Model Number Index (old Items are Stocked) POYK NR Installation Mounting Thread up Screw up iameter YK itting up Screw Mounting Included in Kit (mm) Part Number Only Thread Min. Tube I imensions POYK ia. Ø (5).118 ia. Ø (3) Note: When installing cup assemblies, use a sealant material to secure the assembly and prevent Tube I.. vacuum leakage. Tube I.. listed below is a recommended minimum value, for that cup range, to optimize response time of the system. Your requirements may vary. 20 YK-20 P-20-M5 M4x0.7 emale.157 (4) 25, 30, 35, 40 YK-25 P-25/40-M6 M6x1.0 emale.157 (4) M4x0.7 up iameter (mm) 20 (20) 25 (25) 30 (30) 35 (35) 40 (40) (old Items are Stocked) POYK-25 thru POYK ia. Ø (5).118 ia. Ø (3) up Material Stocked NR Nitrile Rubber vailable (onsult actory) U Urethane M6x Parker annifin orporation ivision
101 atalog /US Ordering Information & imensions POTYS Vacuum up ssemblies Installation Note: When installing cup assemblies, use a sealant material to secure the assembly and prevent vacuum leakage. Shown are interchangable connectors & plugs for port connections. Vacuum ups POTYS Vacuum up ssemblies Mounting Thread ulkhead Level ompensator itting for PO ups Interchangable* Pushlock Tube itting arb itting Plug * Not included with assembly. (old Items are Stocked) up iameter TYS ssembly Port 1 2 Included in Kit (mm) Part Number Stroke Thread lbf (N) lbf (N) imensions POTYS25 thru POTYS40 TYS mm.56 (2.5).79 (3.4) 25, 30, 35, 40 TYS mm M5x (2.5) 1.2 (4.9) TYS mm.67 (2.9) 1.4 (5.9) M14x1 M5x0.8 M5x0.8 Model Number Index (old Items are Stocked) POTYS 25 6 NR SW12.20 (5) SW19 SW17 up iameter (mm) Stroke 25 (25) 30 (30) 6, 15, (35) 40 (40) Model Wt Ø Number oz. (g) POTYS256*.98 (25) 3.07 (78).67 (17).39 (10).04 (1.1).24 (6).20 (5) 1.42 (36) 2.3 (66) POTYS2515*.98 (25) 3.43 (87).67 (17).39 (10).04 (1.1).59 (15).20 (5) 1.42 (36) 2.5 (71) POTYS2530*.98 (25) 4.88 (124).67 (17).39 (10).04 (1.1) 1.18 (30).20 (5) 2.28 (58) 3.4 (96) POTYS306* 1.18 (30) 2.99 (76).67 (17).39 (10).05 (1.3).24 (6).20 (5) 1.42 (36) 2.4 (67) POTYS3015* 1.18 (30) 3.35 (85).67 (17).39 (10).05 (1.3).59 (15).20 (5) 1.42 (36) 2.5 (72) POTYS3030* 1.18 (30) 4.80 (122).67 (17).39 (10).05 (1.3) 1.18 (30).20 (5) 2.28 (58) 3.5 (97) POTYS356* 1.38 (35) 2.99 (76).67 (17).39 (10).06 (1.6).24 (6).20 (5) 1.42 (36) 2.5 (71) POTYS3515* 1.38 (35) 3.35 (85).67 (17).39 (10).06 (1.6).59 (15).20 (5) 1.42 (36) 2.6 (74) POTYS3530* 1.38 (35) 4.80 (122).67 (17).39 (10).06 (1.6) 1.18 (30).20 (5) 2.28 (58) 3.6 (99) POTYS406* 1.57 (40) 3.07 (78).67 (17).39 (10).11 (2.8).24 (6).20 (5) 1.42 (36) 2.5 (71) POTYS4015* 1.57 (40) 3.43 (87).67 (17).39 (10).11 (2.8).59 (15).20 (5) 1.42 (36) 2.7 (76) POTYS4030* 1.57 (40) 4.88 (124).67 (17).39 (10).11 (2.8) 1.18 (30).20 (5) 2.28 (58) 3.6 (101) * up Material up Material Stocked NR Nitrile Rubber vailable (onsult actory) U Urethane ompression orce 1 0% of Stroke 2 100% of Stroke 103 Parker annifin orporation ivision
102 atalog /US eatures P Ring Vacuum ups P Series Vacuum ups Ring suction cups with quality, friendly materials. Inherent symetrical design provides stability during high speed transfer. PM Series Male Thread onnector Simple male connection for low profile applications. Material: luminum. Vacuum ups P Vacuum ups eatures Ring esign Stable ompensation for Transfer Minimum ontact 28mm to 50mm iameters pplications These ring suction cups are popular in / V manufacturing and semi-conductor wafer handling applications. The small edge design minimizes contact with the product. The short stroke minimizes response time and provides stability during transfer in high speed production. P Series emale Thread onnector Simple female connection for low profile applications. Material: luminum. 104 Parker annifin orporation ivision
103 atalog /US Ordering Information Model Number Index (ups Only) (old Items are Stocked) imensions Model Number Specifications up I.. (mm) 20 (20) 23 (23) 29.5 (29.5) 34 (34) 38 (38) 46 (46) Ø Vacuum ups P Vacuum ups P NR P20*.79 (20) 1.30 (33).26 (6.5).08 (2) P23*.91 (23) 1.43 (37).20 (5).01 (3) P29.5* 1.16 (29.5) 1.71 (43.5).20 (5).01 (3) P34* 1.34 (34) 1.89 (48).28 (7).08 (2) P38* 1.50 (38) 2.05 (52).20 (5).01 (3) P46* 1.81 (46) 2.28 (58).28 (7).08 (2) * up Material up Material Stocked SI Silicone vailable (onsult actory) NR Nitrile Rubber SI Silicone S U Urethane KM louro Rubber S igh Temp NR SI SI U KM S Suction up Silicone louro Silicone Material Nitrile Silicone Urethane S* Rubber igh Temp Operating -20 to to to to to to +300 Temperature ( ) lack / lack / olor lack White lue rey Red ot White ot ardness, 55 ±5 55 ±5 55 ±5 55 ±5 70 ±5 55 ±5 Shore ( Sh) lectrical 800 (Ωm) to 1000 Wear Tear Strength ging Ozone asoline Oil cid lkali hemical Mechanical = excellent; = very good; = good; = medium; = poor; = not recommended * S: lectric Static issipative Material 105 Parker annifin orporation ivision
104 atalog /US ssembly Ordering Information PM & P Vacuum up ssemblies Male older for P ups Vacuum ups P Vacuum ups Thread onnection M Male emale P up iameter (mm) older Part Number Mounting Thread 20 M-20 M8x M-23 M8x M-29.5 M8x1.25 emale older for P ups (old Items are Stocked) 34 M-34 M8x M-38 M8x M-46 M8x1.25 (old Items are Stocked) P M NR P up iameter (mm) older Part Number Vacuum Port Mounting Thread M5 emale M30x M5 emale M30x M5 emale M30x M5 emale M30x M5 emale M30x1.0 Model Number Index (old Items are Stocked) up I.. (mm) 20 (20) up Material Stocked 23 (23) SI Silicone 29.5 (29.5) vailable 34 (34) (onsult actory) 38 (38) NR Nitrile Rubber 46 (46) R hloroprene SI Silicone S U Urethane KM louro Rubber S igh Temp 106 Parker annifin orporation ivision
105 atalog /US imensions PM imensions M5 Vacuum Port M8 Model Number Ø PM-20-* 1.57 (40) 0.87 (22).79 (20) 1.02 (26) 0.12 (3).39 (10) PM-23-* 1.77 (45).85 (21.5).91 (23) 1.18 (30).10 (2.5).39 (10) PM-29.5-* 1.97 (50).85 (21.5) 1.16 (29.5) 1.44 (36.5).10 (2.5).39 (10) PM-34-* 2.28 (58).85 (21.5) 1.34 (34) 1.61 (41).11 (2.9).39 (10) PM-38-* 2.36 (60).85 (21.5) 1.50 (38) 1.77 (45).10 (2.5).39 (10) PM-46-* 2.71 (69).87 (22) 1.81 (46) 2.28 (58).12 (3).39 (10) * up Material P imensions M5 Vacuum Port M30x1.0 Vacuum ups PM & P Vacuum up ssemblies Model Number Ø J P-20-* 1.57 (40).96 (24.5).79 (20) 1.02 (26).11 (3).63 (16).57 (14.5).45 (11.5).39 (10) P-23-* 1.57 (40).94 (24).91 (23) 1.18 (30).10 (2.5).79 (20).57 (14.5).35 (9).39 (10) P-29.5-* 1.83 (46.5).94 (24) 1.16 (29.5) 1.44 (36.5).10 (2.5) 1.04 (6.5).57 (14.5).35 (9).39 (10) P-34-* 2.05 (52) 1.02 (26) 1.34 (34) 1.61 (41).11 (3) 1.12 (28.5).57 (14.5).35 (9).39 (10) P-38-* 2.20 (56) 1.00 (25.4) 1.50 (38) 1.77 (45).10 (2.5) 1.12 (28.5).57 (14.5).35 (9).39 (10) * up Material J 107 Parker annifin orporation ivision
106 atalog /US eatures & Specifications P Sponge Vacuum ups P Series Vacuum ups Sponge cup for lightweight product having irregular or uneven surfaces where vacuum leakage is a concern. The sponge material conforms to the surface minimizing vacuum leakage while protecting product surface. PTM Series Male Thread onnector Simple male connection for low profile positions secured to a plate or bracket. itting Material: luminum or 303 SUS. Vacuum ups P Vacuum ups eatures S Sponge Material (lectric Static issipative Material) onforms to Product lectronic ssembly and Packaging 4mm to 15mm iameters pplications These sponge cups are for small lightweight products where flat surfaces are unavailable for conventional flat cups. The 20 durometer sponge material easily conforms to the product surface creating an adequate vacuum level for transfer; like or SP chips. The cups are available in silicon static dissipative materials. Specifications Suction up Material R Solder ircuit oard SI Operating -30 to to +250 Temperature ( ) olor lack lack ardness, 20 ±5 20 ±5 Shore ( Sh) lectrical 10 4 to to 10 (Ωcm) 5 Wear Tear Strength ging Ozone cid lkali hemical Mechanical = excellent; = very good; = good; = medium; = poor; = not recommended 108 Parker annifin orporation ivision
107 atalog /US Ordering Information Model Number Index (ups Only) (old Items are Stocked) P R up iameter (mm) 4 (4) 6.5 (6.5) 8 (8) 9.5 (9.5) 12 (12) 15 (15) Male itting for P ups imensions Model Number Ø Ø P-4-*.16 (4).002 (1.5).18 (4.5) P-6.5-*.27 (6.5).13 (3.2).18 (4.5) P-8-*.31 (8).13 (3.2).18 (4.5) P-9.5-* 37 (9.5).16 (4).18 (4.5) P-12-*.47 (12).16 (4).18 (4.5) P-15-*.59 (15).20 (5).18 (4.5) * up Material up Material Stocked R hloroprene S* vailable (onsult actory) SI Silicone S* Vacuum ups P Vacuum ups & PTM ssemblies Model Number Index (old Items are Stocked) PTM R - M5 up iameter (mm) 4 (4) 6.5 (6.5) 8 (8) 9.5 (9.5) 12 (12) 15 (15) imensions SW up Material Stocked R hloroprene S* vailable (onsult actory) SI Silicone S* * S - lectric Static issipative Material * S - lectric Static issipative Material (old Items are Stocked).079 (2).039 (1).20 (5).25 (6.35) itting Thread () M5 M5 Included in Kit up iameter (mm) Mounting Thread ode Mounting Thread TM Part Number Tube I 4 M5 M5x0.8 Male TM-4-M5.098 (2.5) 6.5, 8 M5 M5x0.8 Male TM-6.5-M5.098 (2.5) 9.5 M5 M5x0.8 Male TM-9.5-M5.098 (2.5) 12, 15 M5 M5x0.8 Male TM-12-M5.098 (2.5) Model Number Ø SW PTM-4-*-.16 (4) M5.16 (4) PTM-6.5-*-.27 (6.5) M5.27 (6.5) PTM-8-*-.31 (8) M5.27 (6.5) PTM-9.5-*-.37 (9.5) M5.37 (9.5) PTM-12-*-.47 (12) M5.47 (12) PTM-15-*-.59 (15) M5.59 (15) * up Material Thread Size 109 Parker annifin orporation ivision
108 atalog /US eatures P oil, Paper, ilm Vacuum ups P Series Vacuum ups These cups have an ultra thin edge that creates the vacuum seal by conforming to the shape of the product. The complete foot pattern to the center of the cup prevents the vacuum from deforming or puckering thin, flexible products. PTM Series Male Thread onnector Simple male connection for low profile positions secured to a plate or bracket. UN, NPT,, metric threads. itting Material: luminum. PTK Series arbed ulkhead Top stem connectors secured with jam nuts and allow tubing connections at the top side. Nickel plated brass materials. Vacuum ups P Vacuum ups eatures Ultra Thin Lip esign up onforms to Product 10mm to 50mm iameter pplications The P ups are ideal for paper feeding, plastic bags and foil. The choice between the 10 & 10, 15 & 15, 20 & 20, 30 & 30 is application dependent. The cups have a thinner lip design than the cups. This thinner lip design is more suited to plastic bags and foils. The design is better suited for thin rigid items like solar battery cells. PYK Series 90 arbed dapter Side stem connectors allow you to secure the stem with a bolt through a plate or L bracket to allow the tube connection from the side port. Nickel plated brass materials. 110 Parker annifin orporation ivision
109 atalog /US Ordering Information Model Number Index (ups Only) (old Items are Stocked) Specifications up iameter / eflection (mm) 10 (10 / 0.6)* 10 (10 / 0.3)* 15 (15 / 0.9)* 15 (15 / 0.5)* 20 (20 / 1.2)* 20 (20 / 0.8)* 30 (30 / 1.8)* 30 (30 / 0.3)* 40 (40) 50 (50) * ups with the same diameter have different cup deflection. Vacuum ups P Vacuum ups P NR NR R SI SI U KM Suction up Silicone louro Material Nitrile hloroprene Silicone Urethane S* Rubber Operating Temperature ( ) to +120 to +140 to +250 to +250 to +120 to +230 olor lack reen White ardness, Shore ( Sh) lack / lack / lue Red ot White ot 55 ±5 55 ±5 55 ±5 55 ±5 55 ±5 70 ±5 lectrical 800 (Ωm) to 1000 Wear Tear Strength ging Ozone asoline Oil cid lkali hemical Mechanical = excellent; = very good; = good; = medium; = poor; = not recommended * S: lectric Static issipative Material up Material Standard NR Nitrile Rubber SI Silicone vailable (onsult actory) U Urethane R hloroprene SI Silicone S KM louro Rubber 111 Parker annifin orporation ivision
110 atalog /US pplications & Technical ata pplication uide Thin - Smooth Surfaces Products With Smooth Surfaces Products With Micron Thickness Main ata for P ups up Model up iameter rea eflection (S) Number cm 2 (mm) P-10-*.39 (10) P-15-*.59 (15) P-20-*.79 (20) P-10-*.39 (10) P-15-*.59 (15) P-20-*.79 (20) P-30-* 1.18 (30) P-30-* 1.18 (30) P-40-* 1.57 (40) P-50-* 1.57 (40) * up Material Volume V Vacuum ups P Vacuum ups up eflection When Opening Plastic or Paper ags, Offset ups S 112 Parker annifin orporation ivision
111 atalog /US imensions imensions P-10 and P-20 Model Number Ø Ø Ø Ø J P-10-*.39 (10).16 (4).08 (2).33 (8.5).30 (7.5).02 (.6).15 (4).08 (2).24 (6) P-15-*.59 (15).16 (4).08 (2).33 (8.5).30 (7.5).04 (.9).15 (4).08 (2).24 (6) P-20-*.79 (20).16 (4).08 (2).35 (9).39 (10).05 (1.2).15 (4).08 (2).24 (6) P-10-*.39 (10).16 (4).08 (2).33 (8.5).30 (7.5).01 (.3).15 (4).08 (2).24 (6) P-15-*.59 (15).16 (4).08 (2).33 (8.5).30 (7.5).02 (.5).15 (4).08 (2).24 (6) P-20-*.79 (20).16 (4).08 (2).35 (9).39 (10).03 (.8).15 (4).08 (2).24 (6) P-30-* 1.18 (30).24 (6).12 (3).59 (15).43 (11).06 (1.5).28 (7).15 (4).39 (10) P-30-* 1.18 (30) 1.02 (26).12 (3).87 (22) 1.02 (26).07 (1.8).63 (16).31 (8) * up Material J P-30 thru P-50 Vacuum ups P Vacuum ups P-10 and P-30 M6x1.0 P-40-* 1.57 (40) 1.02 (26).12 (3).87 (22) 1.02 (26).09 (2.4).63 (16).31 (8) P-50-* 1.97 (50) 1.02 (26).12 (3).87 (22) 1.02 (26).12 (3).63 (16).31 (8) J 113 Parker annifin orporation ivision
112 atalog /US Ordering Information PTM Vacuum up ssemblies Installation Note: When installing cup assemblies, use a sealant material to secure the assembly and prevent vacuum leakage. Tube I.. shown below is a recommended minimum value to optimize response time of the system. Your requirements may vary. Mounting Thread Tube I.. Male itting for P ups Vacuum ups PTM Vacuum up ssemblies PTM NR - M5 up iameter Mounting Mounting TM itting Included in Kit (mm) Thread ode Thread Part Number Tube I (old Items are Stocked) Model Number Index (old Items are Stocked) up iameter (mm) 10 (10) 10 (10) 15 (15) 15 (15) 20 (20) 20 (20) 30 (30) 30 (30) 40 (40) 50 (50) up Material Stocked NR Nitrile Rubber SI Silicone vailable (onsult actory) U Urethane R hloroprene SI Silicone S KM louro Rubber 10, 15, 20, 30 M5 M5X0.8 Male TM-5-M5.157 (4) 30, 40, /8 SPP Male -1M-M6.157 (4) Mounting Thread M5 M5 1 1/8 SPP See hart elow 114 Parker annifin orporation ivision
113 atalog /US imensions imensions PTM-10 thru PTM-20 and PTM-10 thru PTM-30 SW8 M5: M5x0.8 Vacuum ups PTM Vacuum up ssemblies PTM-30 thru PTM-50 Model Number Ø PTM-10-*-.39 (10).44 (11).18 (4.5).14 (3.5).02 (.6) PTM-15-*-.59 (15).44 (11).18 (4.5).14 (3.5).04 (.9) PTM-20-*-.79 (20).53 (13.5).18 (4.5).14 (3.5).05 (1.2) PTM-10-*-.39 (10).44 (11).18 (4.5).14 (3.5).01 (.3) PTM-15-*-.59 (15).44 (11).18 (4.5).14 (3.5).02 (.5) PTM-20-*-.79 (20).53 (13.5).18 (4.5).14 (3.5).03 (.8) PTM-30-* (30).57 (14.5).51 (13).83 (21).06 (1.5) PTM-30-* (30) 1.22 (31).51 (13).83 (21).07 (1.8).12 (3).59 (15).87 (22) PTM-40-* (40) 1.22 (31).51 (13).83 (21).09 (2.4).12 (3).59 (15).87 (22) PTM-50-* (50) 1.22 (31).51 (13).83 (21).12 (3).12 (3).59 (15).87 (22) * up Material Thread Size 1: 1/8 SPP 115 Parker annifin orporation ivision
114 atalog /US Ordering Information PTK Vacuum up ssemblies Installation Note: When installing cup assemblies, use a sealant material to secure the assembly and prevent vacuum leakage. Tube I.. shown below is a recommended minimum value to optimize response time of the system. Your requirements may vary. arbed ulkhead for P ups Vacuum ups PTK Vacuum up ssemblies up iameter Mounting TK itting Included in Kit (mm) Thread Part Number Tube I Mounting Thread Tube I.. 10, 15, 20, 30 M9x1.0 Male TK (4) 30, 40, 50 M10x1.5 Male TK (4) Model Number Index (old Items are Stocked) PTK NR (old Items are Stocked) up iameter (mm) 10 (10) 10 (10) 15 (15) 15 (15) 20 (20) 20 (20) 30 (30) 30 (30) 40 (40) 50 (50) up Material Stocked NR Nitrile Rubber SI Silicone vailable (onsult actory) U Urethane R hloroprene SI Silicone S KM louro Rubber 116 Parker annifin orporation ivision
115 atalog /US imensions imensions PTK-10 thru PTK-20 and PTK-10 thru PTK ia. Ø (5) M9x1.0 SW12 SW ia. Ø (3) Vacuum ups PTK Vacuum up ssemblies PTK-30 thru PTK ia. Ø (5) M10x1.5 SW14 SW14 Model Number Ø PTK-10-*.39 (10) 1.81 (46).63 (16).89 (22.5).02 (.6).61 (15.5).12 (3) PTK-15-*.59 (15) 1.81 (46).63 (16).89 (22.5).04 (.9).61 (15.5).12 (3) PTK-20-*.79 (20) 1.91 (48.5).63 (16).89 (22.5).05 (1.2).61 (15.5).12 (3) PTK-10-*.39 (10) 1.81 (46).63 (16).89 (22.5).01 (.3).61 (15.5).12 (3) PTK-15-*.59 (15) 1.81 (46).63 (16).89 (22.5).02 (.5).61 (15.5).12 (3) PTK-20-*.79 (20) 1.91 (48.5).63 (16).89 (22.5).03 (.8).61 (15.5).12 (3) PTK-30-* 1.18 (30) 2.61 (66.2).63 (16).89 (22.5).06 (1.5).79 (20).20 (5) PTK-30-* 1.18 (30) 2.61 (66.2).63 (16) 1.27 (32.2).07 (1.8).79 (20).20 (5) PTK-40-* 1.57 (40) 2.61 (66.2).63 (16) 1.27 (32.2).09 (2.4).79 (20).20 (5) PTK-50-* 1.97 (50) 2.61 (66.2).63 (16) 1.27 (32.2).1.2 (3).79 (20).20 (5) * up Material.118 ia. Ø (3) 117 Parker annifin orporation ivision
116 atalog /US Ordering Information PYK Vacuum up ssemblies Installation Note: When installing cup assemblies, use a sealant material to secure the assembly and prevent vacuum leakage. Tube I.. shown below is a recommended minimum value to optimize response time of the system. Your requirements may vary. Mounting Thread Tube I.. 90 arbed dapter for P ups Vacuum ups PYK Vacuum up ssemblies up iameter Mounting YK itting Included in Kit (mm) Thread Part Number Tube I 10, 15, 20, 30 M4x0.7 emale YK (4) 30, 40, 50 M6x1.0 emale YK (4) Model Number Index (old Items are Stocked) PYK NR up iameter (mm) 10 (10) 10 (10) 15 (15) 15 (15) 20 (20) 20 (20) 30 (30) 30 (30) 40 (40) 50 (50) (old Items are Stocked) up Material Stocked NR Nitrile Rubber SI Silicone vailable (onsult actory) U Urethane R hloroprene SI Silicone S KM louro Rubber 118 Parker annifin orporation ivision
Vacuum Cups. Styles. Cup material Nitrile Silicon Urethane Material code NBR SI U Operating temperature ( C) -60 to ±5 55 ±5 55 ±5
atalog PN1000-2US Vacuum ups P ellows Vacuum ups These s are for curved, corrugated, lightly textured surfaces and flexible product. Under vacuum, the bellow will collapse on contact and lift the product
More informationVacuum Technology. Catalogue PDE2507TCUK-ab. Convum
Vacuum Technology atalogue P2507TUK-ab onvum Global Pneumatics This icon can be found next to products that are widely supported by Parker Pneumatics worldwide manufacturing and sales network. When you
More informationHigh Performance Repairable Pneumatic Cylinder Parker Hannifin Corporation
High Performance Repairable Pneumatic Cylinder 219 Pneumatic ivision eatures Optional Piston Magnet Located under wear band, piston magnet is used for through-thebarrel sensors for electronic piston position
More informationVacuum Pad: Large Size Bellows Type
Vacuum Pad: Large Size ellows Type Series ZPT/ZPX ø4, ø5, ø, ø, ø1, ø Z ZX ZR ZM deal for loads with a curved surface, heavyweight loads and loads with large surface area. ZM ZQ Z ZU ZL Z Z ZP SP ZUK MJ
More information1 Cylinder. 1 - Cylinder Type 3 - Cylinder Capacity 4 - Cylinder Stroke. 2 - Cylinder Options. Cylinder Accessories
1 Type 30 06 T 2 3 4 5 apacity Stroke Options ode 1 - Type 3 - apacity 4 - Stroke ydraulic 2 - Options L LN LN P P T U U U ULN S/ - ollow ole / - eneral Purpose / - ollow ole / - igh Tonnage S/ - lat ody
More informationSection 6 Feet & Casters
atalog 1816-3/US ontents Section 6 155 Wadsworth, Ohio US atalog 1816-3/US Leveling Feet Leveling Foot 21-001 21-001-30 pplication 21-001 21-001-30 Series min max Max Load N (lbs) (g) 40 40 40 21-001 30
More informationVacuum Cups & Fittings
Vacuum ups & Fittings Vaccon offers a wide range of vacuum cup styles sizes. Fittings in multiple styles are also available individually or as a cup assembly. ups are available in various durometers, colors
More information4-Way, 5-Port, 2 & 3-Position Solenoid and Remote Pilot 1/2" & 3/4" Ports. Technical & Service Data. Pneumatic
atalog VL-UTO-/US (Revised 6/0/0) pplication & Model Selection S utomotive Subbase Valves -Way, -ort, & -osition Solenoid and Remote ilot /" & /" orts pplication ual pressure or diverter valve operation
More informationCouplings - Quick Disconnect
ouplings - Quick isconnect Hydraulic - eneral Purpose... -1-3, -6 Hydraulic - Non Spill...-4-6 Pneumatic - eneral Purpose Manual onnect...-7-9 Pneumatic - eneral Purpose Push-to-onnect...-1-13 Industrial
More informationIsys Micro Series. Air Control Valves. Section E
Series ir ontrol Valves Section www.parker.com/pneu/micro X asic Valve unctions... asic Valve eatures... Product Overview... v harts...5 Plug-in Valve Part Numbers...6 Plug-in anifolds...7 Plug-in nd Plate
More informationADEX Series Air Control Valves A00.01 Cv M3 Port A05.18 Cv M5 Port A12.47 Cv 1/8" Port zpv02 A B C D E F G H. Section H
X Series ir ontrol alves 00.0 v ort 05.8 v 5 ort.47 v /8" ort zpv02 Section www.parker.com/pneu/adex asic alve unctions... 2 asic alve eatures... ommon art umbers / R Type alves... 4 odel umber Index /
More informationTension Brakes/High Heat Capacity
IST. UTORIZO Tension rakes/igh eat apacity MX (55) 53 63 23 31 Steel Water ooled rakes ost effective design One piece water jacket eliminates leakage Release springs ensure complete disengagement New friction
More informationPVL Series. Solenoid & Remote Pilot Operated 1/8" & 1/4" Valves. Section C. C59
Series Solenoid & Remote Pilot Operated /8" & /4" Valves Section Moduflex www.parker.com/pneu/pvl asic Valve unctions...60 Stacking pplications...6-62 eatures ( & )...63 ommon Part Numbers-Stacking ( &
More informationVACUUM CUPS 2 SECTION 2 VACUUM CUPS 2: EDCO USA.
VACUUM S SECTION VACUUM S 01 EDCO USA. www.edcousa.net :1 VACUUM S CONTENTS BELLOWS S (B) DOUBLE BELLOWS S (B) BELLOWS TRACTION FOOT S (BF) MULTI-BELLOWS S (BL) DEEP S (D) FLAT S (F) FLAT CONCAVE S (FC)
More informationTension Brakes/Air Cooled
IST. UTORIZO Tension rakes/ir ooled MX (55) 53 63 23 31 Magnum rakes The Wichita Magnum rake sets new standards in performance, safety and serviceability. The Magnum is easy to apply and simple to service.
More informationADEX Series. Air Control Valves. Section D
X Series ir ontrol alves 00.0 v.8 v.47 v ort 5 ort /8" ort Section www.parker.com/pneu/adex X iking Z asic alve unctions...00 asic alve eatures...0 ommon art umbers / R Type alves...02 odel umber Index
More informationVacuum Pad: Ball Joint Type
Vacuum Pad: all oint Type / eries Pad iameter: ø, ø1, ø, ø,,, ø, ø0 all joint type ideal for adsorption on a slanted work surfaces acaces all joint type ideal for adsorption on a slanted work surfaces
More information9 mm shortened. 11 mm shortened. Vacuum Pad. ZP3 Series. ø1.5 ø2 ø3.5 ø4 ø6 ø8 ø10 ø13 ø16. Overall length is shortened. Space-saving.
Vacuum Pad Series ø1., ø, ø., ø,, ø, ø, ø1, ø16 RoHS Overall length is shortened. In the case of Flat type (Pad diameter: ø) Pad unit Max. 9 mm shortened With adapter Max. 11 mm shortened ctual size ctual
More informationDIST. AUTORIZADO. Design Features
IST. UTORIZO MX (55) 53 63 23 31 Kopper Kool rakes opper disc design for high heat dissipation xternal air and water connections ccurate control igh Temperature O-Rings New friction material lasts longer
More informationVictory A-Series Actuators PRODUCT CATALOG V55A V43A FG1 V32A FG2 V26A
Victory -Series ctuators PROUT TLOG V55 with parallel motor mounting V4 G1 with parallel motor mounting V2 G2 with inline motor mounting V26 with inline motor mounting Longer, aster, and More Reliable
More informationTable of Contents. Quick Coupling Products
Quick oupling Products Table of ontents Table Of ontents...1 Fluid Quick ouplings...3 oupling Selection uide...4 Non-Spill ouplings...5 FS Series...5 ouplers...6 Nipples...7 FS Series ust aps & Plugs...8
More informationPneufit Inch Series Push-In Tube Fittings 1/8" to 1/2" Tube Sizes UNF to 1/2" NPT Thread Options
Section 1 Pneufit Inch Series Push-In Tube Fittings to 1/2" Tube Sizes 10-32 UNF to 1/2" NPT Thread Options Inch Series Product Numbering System..................FIT-1-2 Inch Series Shapes and odes.........................fit-1-3
More informationPneumatics Pneumatic Quick ouplings Single Shut-Off ouplings Single Shut-Off couplings are primarily used for pneumatic applications, connecting air t
Pneumatic Quick ouplings Pneumatics -1 Quick oupling ivision Pneumatics Pneumatic Quick ouplings Single Shut-Off ouplings Single Shut-Off couplings are primarily used for pneumatic applications, connecting
More informationPiston Accumulators Series Catalog HY /US
Series 3000 Series 3000 Heavy uty Service with 3000 PSI Operating Pressure 2" thru 12" ores with Over 50 Standard apacities Patented V-O-ring Piston Seals Serviceable Threaded End onstruction Five Standard
More informationatalog /USA otes ontrol omponents 2 Parker Hannifin orporation ivision
Section 1 Parker Hannifin orporation ivision atalog 0802-2/USA otes ontrol omponents 2 Parker Hannifin orporation ivision atalog 0802-2/USA Index ontrol omponents Advantages, Assembly, Ordering Information...
More informationPNEUMATIC RACK AND PINION ACTUATORS. Advanced torque to size ratio
PNUMTI RK N PINION TUTORS dvanced torque to size ratio eatures: Pneumatic Rack and Pinion ctuators 90 ctuation for -way valves (Straight & ngle) 180 ctuation for -way (T-type) valves ctuators comply with
More informationPVL Series Solenoid & Remote Pilot Operated 1/8" & 1/4" Valves zpv06
PVL Series Solenoid & Remote Pilot Operated /8" & /4" Valves zpv06 Section www.parker.com/pneu/pvl asic Valve unctions... 3 Stacking System Overview... 4 eatures (PVL & PVL)... 5 Part Numbers Stacking
More informationPiston Accumulators Series Catalog HY /US Page
Page Series 5000 Series 5000 Piston ccumulators Heavy uty Service with 5000 PSI Operating Pressure 2" thru 9" ores with Over 30 Standard apacities Patented V-O-ring Piston Seals Serviceable Threaded End
More informationInstrument Ball Valves
www.swagelok.com Instrument all s 40 Series On-off, switching, and crossover flow paths Working pressures up to 3000 psig (206 bar) Temperatures from 50 to 150 (10 to 65 ) Low-temperature service option
More informationTrueSeal Thermoplastic Push-In Fittings
True Thermoplastic Push-In Fittings atalog 3501 aterials of onstruction aterial Fitting olor O-Ring P Polypropylene P Fluorocarbon omenclature xample: a4mc4-mg-v a 4 mc ttribute: Fitting body material
More informationHigh Pressure Valves, Fittings and Tubing Pressures to 65,000 psi
igh Pressure Valves, ittings and Tubing MXMTOR has been designing and manufacturing high pressure equipment for more than thirty years and has a worldwide reputation for quality and reliability, backed
More informationHigh Pressure Valves, Fittings and Tubing Pressures to 65,000 psi (4,500 bar)
igh Pressure Valves, ittings and Tubing Pressures to psi (4,00 bar) MXMTOR has been designing and manufacturing high pressure equipment for more than thirty years and has a worldwide reputation for quality
More informationSupplying All Your Needs for Vacuum Cups, Grippers, Seals and Rollers
Supplying ll Your Needs for Vacuum ups, Grippers, Seals and Rollers VI-S MNUTURING has been committed for over twenty-five years to serving our customers with the finest quality products at the best possible
More informationNeedle Valves. Needle Valves Part Matrix. Flow Coefficient (C v ) belgas.net 1
Needle Valves elgs Standard Needle Valves offer four choices in 316 stainless steel as well as one piece forged carbon plated steel; soft seat and hard seat, angle and globe styles. The Mini Valve offers
More informationVACUUM PADS CONTENTS ACCESSORIES GENERAL CATALOG AIR TREATMENT, AUXILIARY, VACUUM, AND FLUORORESIN PRODUCTS. Caution VACUUM PADS
drawing data catalog is available. ESSORIES GENERL TLOG IR TRETMENT, UXILIRY, VUUM, N FLUORORESIN PROUTS VUUM PS ONTENTS Specifications 729 Order odes 7 Theoretical Lifting Force, Rubber Materials and
More informationHigh Pressure Valves, Fittings and Tubing Pressures to 65,000 psi
igh Pressure Valves, ittings and Tubing MXMTOR has been designing and manufacturing high pressure equipment for more than thirty years and has a worldwide reputation for quality and reliability, backed
More informationUltra High Pressure Valves, Fittings and Tubing Pressures to 152,000 psi
Ultra High Valves, ittings and Tubing s to 152,000 psi MXIMTOR has been designing and manufacturing high pressure equipment for more than thirty years and has a worldwide reputation for quality and reliability,
More informationMedium Pressure Valves, Fittings and Tubing Pressures to 21,000 psi
Medium Pressure Valves, ittings and Tubing MXIMTOR has been designing and manufacturing high pressure equipment for more than thirty years and has a worldwide reputation for quality and reliability, backed
More informationTrueSeal Fittings. Applications: Markets: Food Potable Water Chemical Filtration. Specifications:
Parker s TrueSeal Fittings are lightweight, field attachable and connect to tubing without the use of tools. These all plastic push-to-connect fittings are manufactured from F compliant materials. Product
More informationPiston Accumulators Series Catalog /USA Page
atalog 1630-7/US Page Piston ccumulators Series 5000 Series 5000 Piston ccumulators Heavy uty Service with 5000 PSI Operating Pressure 2" thru 9" ores with Over 30 Standard apacities Patented V-O-ring
More informationPneumatic Quick Couplings
Pneumatic Quick ouplings -1 maku GmbH & o. KG 73630 Remshalden Telefon (0 71 51) 7 26 26 Telefax (0 71 51) 7 42 01 www.maku-industrie.de Pneumatics Pneumatic Quick ouplings Single Shut-Off ouplings Single
More informationStandard suction cups
BLOCK CYLINDER Double acting V E R I N S HYDRAULIQUE Standard suction cups AND Inserts for standard suction cups VCN SERIE ISO seals Maximum working pressure: 500 bar Bore: Ø 25 to Ø 125 mm 1 Selecting
More informationFT SERIES. FT Series Linear Actuators
T SRS OR ROR SRW TUTOR Mount virtually any servo motor ong stroke lengths available igh speed and long life Motors shown in drawings are for illustrative purposes only and are not included with T ctuators.
More informationhydraulic power clamps
ourtesy of M/Flodyne/ydradyne Motion ontrol ydraulic Pneumatic lectrical Mechanical (8) 426-548 www.cmafh.com hydraulic power clamps Table of ontents ydraulic lamping 1-21-4 1-21-51 1-21-72 1-211-2 1-211-4
More informationDiagnostic, Orifice, Bleed Adapters and Specialty Fittings
iagnostic, Orifice, leed dapters and Specialty ittings The itting uthority 4300 atalog iagnostic, Orifice, leed dapters iagnostic Tees O6G5TP ORS Swivel / ORS / SE-OR XX6G5TP 37 Swivel / 37 lare / SE-OR
More informationThermoplastik- & Fluorpolymerprodukte
Thermoplastik- & luorpolymerprodukte Parflex - luorpolymerschläuche Katalog T 4660/US 01/12(2) Vertrieb rau Krauspe Tel.: 03525 680110 krauspe@haupt-hydraulik.de rau öhler Tel.: 03525 680111 goehler@haupt-hydraulik.de
More informationQuick oupling Products Introduction The Parker Hannifin offers a full range of precision quick action couplings for use in the process, power and inst
Instrumentation Quick ouplings 1 Parker Hannifin orporation Quick oupling Products Introduction The Parker Hannifin offers a full range of precision quick action couplings for use in the process, power
More informationHigh Pressure Valves, Fittings and Tubing Pressures to 65,000 psi
igh Pressure Valves, ittings and Tubing MXMTOR has been designing and manufacturing high pressure equipment for more than thirty years and has a worldwide reputation for quality and reliability, backed
More informationQuick Couplings. Section F
Quick ouplings Section conomatic Quick onnect...2-3 Sleevmatic...4-6...7-8 conomatic Quick onnect ouplings...9-10 Pneumatic ivision 1 Richland, Michigan Pneumatic Products irline ccessories Numbers & imensions
More informationSuction Pads for Plastic Films and Paper
for Plastic Films and Paper Flat SGN 25 K to SGN 40 K Suction area (Ø) from 25 mm to 40 mm Suitability for Industry-Specific Applications Applications Round, flat suction pad for handling of paper, plastic
More informationN Series. High Speed Inline Poppet Valves 2 & 3-Way. Section D
Series igh Speed Inline Poppet Valves & 3-Way Section www.parker.com/pneu/n X Viking Z asic Valve unctions...0 Series asic eatures... ommon Part umbers...-3 Model umber Index...4- Technical Information
More informationPiston Seal CQ Profile
Q Profile Q Profile, Premium PTFE ap with nti-rift Technology atalog EPS 530/US The Parker Q profile is a bi-directional piston seal for use in medium to heavy duty hydraulic applications. The Q profile
More informationAkroBins. Storage Bins
X Storage ins kroins Control inventories, shorten assembly times, and minimize parts handling. eavy-duty bins securely stack atop each other, sit on shelving, and hang from kro-mils racks, panels, rails,
More informationPiston Seal OE Profile
Seal, PTFE ap Seal atalog EPS 530/US The Parker OE profile is a bi-directional piston seal for use in low to medium duty hydraulic applications. The OE profile is a two piece design comprised of a standard
More informationAccessory Selection Guide
ccessory Selection Guide ccessory Selection Guide Product Vacuum Filter Gauge Sensor Silencer Silencer Solenoid Switch Switch Sensor ups ST Valve (Mech) Solid Solid State State LV Series MV Series V Series
More informationPress Section Overview
Section Overview -200 Type and unctions Page -rame es 1-200 Roll rame es R 5-20 -lamp es 8 - rbor es 8 ench rame 8-200 ccessories Speed hart -200 ustom uilt es 1 5 1-0 Tension Meter ells TM L 2 pplication
More informationCG Series Visual Index
Series Visual Index Series Permanent 101 Male Taper Pipe Rigid 102 emale Taper Pipe Rigid 103 Male (I) 37 Rigid 105 Male Str. O-ring 106 S (I) 37 Swivel Series PRMNNT -53-54 -54-54 -55 107 emale Pipe Swivel
More informationStainless steel piston rod. Low-friction piston rod seal. ouble and single-acting versions Smooth stainless steel cylinder tube. The Parker Pneumatic
atalog 0923/NA (10/01) Stainless steel piston rod. Low-friction piston rod seal. ouble and single-acting versions Smooth stainless steel cylinder tube. The Parker Pneumatic P1A range of cylinders is intended
More informationValvair Manual Spool Valves
Valvair anual Spool Valves ir ilot, anual & echanically ctuated Section www.parker.com/pneu irectair rass oppet irectair Viking 0 V / Z eatures & Specifications... 5 art umbers...5-5 Technical ata... 55
More informationhydraulic power clamps
hydraulic power clamps Table of ontents lick Page # View ydraulic lamping Page M-Y-# ydraulic lamping Page M-Y-# 1-21-4 1-21-51 1-21-72 1-211-2 1-211-4 1-211-52 1-211-54 1-212-4 3-4 3-1-S-475 3-1--475
More informationThermoplastic Couplings
Thermoplastic ouplings Thermoplastics -1 Quick oupling Division Thermoplastic ouplings Table of ontents Thermoplastics oupling Selection Guide...-3 Spectrum Series...-4 Specifications...-4 ouplers...-5
More informationFeatures. Specification. Model. Acting type. Tube I.D. (mm) Port size M3 0.5 M Medium. Ambient temperature
series PRE GRIPPER (2-inger) Order example HD 2R MODE TUE I.D. 8 12 16 2 PIPING TYPE lank: xial piping R: Side piping eatures ow profile design saves space and reduces bending moments, improved accuracy
More informationRC-Series DUO Cylinders, Single-Acting. The Industry Standard General Purpose Cylinder.
R-Series UO ylinders, Single-cting Shown from left to right: R-506, R-50, R-2510, R-4, R-10010, R-55, R-1010 The Industry Standard General Purpose ylinder s ll R cylinders are equipped with hardened removable
More informationTutorial, Introduction & Benefits PTFE Hose Assembly & Fittings Nomenclature SAE 100R14A Hose
PTF & PTF & Table of ontents ydraulic & & Fit. Tutorial, Introduction & enefits... 130-131 PTF ssembly & Nomenclature... 132 PTF & Smooth ore 919 S 100R14... 133 919 S 100R14 (Static-Dissipative )... 133
More informationMedium Pressure Valves, Fittings and Tubing Pressures to 21,000 22,500 psi (1,500 (1,550 bar)
Medium Valves, ittings Tubing s to 22,00 psi (,00 (,0 bar) MXIMTOR has been designing manufacturing high pressure equipment for more than thirty years has a worldwide reputation for quality reliability,
More informationPower Take-Off Clutches
IST. UTORIZO Power Take-Off lutches Superior torque control for heavy duty diesel engines Wichita has instituted quality assurance procedures aimed at achieving the ultimate in product reliability and
More informationValve Products. Viking Lite Series Valves. Operating information. Minimum operating pressure, PSIG (bar) Materials. Recommended air quality for valves
atalog 000-US arker neumatic Valve roducts Viking ite Valves The Viking ite valve range is robust, versatile and combines a large flow capacity with short change-over times, designer may choose /8, / or
More informationMaximum Working Pressure. Code Description Brass
Technical Information Series 500 General escription Series 500 low pressure ball valves provide total shut-off capability for services up to 41 ar (600 PSI). Series 500 consists of PT female/female ports,
More informationLIGHTWEIGHT + COMPACT. Rotary Union Solutions SPS. Series NPT CONNECTION SIZE OPTIONS
LIGTWEIGT + OMPT Rotary Union Solutions Series NPT ONNETION SIZE OPTIONS ⅛" ½" ¼" ¾" ⅜" 1" Rotary Union Solutions ontents bout STI 3 What is a Rotary Union? 4 Series Overview 5 ow To Order 7 Specifi cations
More informationMaximum speed ratings are based on light loads and reflective of bore sizes: 1/2 =6000 RPM, 5/8 =5000 RPM, 3/4 =4500 RPM, and 1 =3500 RPM
RIN S LTION TORS We recommend that testing be done in the actual operating environment to determine if a certain bearing unit is suitable for the application. Many variations can occur such as temperature,
More informationFemale - Swivel. 45 Elbow. 45 Elbow (5000 psi) 16E78 B-96 16B78 B /2 Elbow. 60 Elbow 16N78 B Elbow. Female - Swivel Long 1C978 B-101
atalog 4400 US Visual Index Use with 781, 782T, 782ST hoses. 10178-94 10678-94 13978-94 NPTF Pipe Male - Rigid JI 37 ode 61 11578-94 1478-95 11778-95 14F78-95 11978-95 14N78-96 ode 62 (5000 psi) 1678-96
More informationSMD2. Compact cylinder. Space saving structure 6, 10, 16 20, 25, 32. Simple square design. Switch integrated. Easy centering. Precise installation
pace saving structure Overview his direct mount cylinder is a high rigidity/small square air cylinder with excellent installation accuracy and multisurface direct mount. he square shaped body improves
More informationLight Coupling Series
http://www.pisco.co.jp FITTING ONTROLLER VALVE TUE MAKE-TO-ORDER PRODUTS Push-In Fitting oupling Light oupling 342 oupling with Push-In Fitting. Easy oupling and Uncoupling with One-Hand Operation. Suitable
More informationViking Lite Series Valves Air Control Valves
atalog 0697 arker neumatic Viking ite Series Valves ir ontrol Valves The Viking ite valve range is robust, versatile and combines a large flow capacity with short change-over times, designer may choose
More informationFlat Suction Pads (Oval)
Flat (Oval) Flat SGON Suitability for Industry-Specific Applications Applications Oval and flat suction pad for handling of narrow workpieces, including curved objects, such as sections, pipes, packaging
More information,, WY VLVS Way Valves - Side ntry Product index... p. - Way Valves - ottom ntry Product index... p. Way Valves - ottom ntry Product index...p. ontents
MTRI,, WY VLVS 6P/6P SRIS ,, WY VLVS Way Valves - Side ntry Product index... p. - Way Valves - ottom ntry Product index... p. Way Valves - ottom ntry Product index...p. ontents Introduction... Page - Product
More informationHand Crank & Brake Assembly. 12V 1 /3 hp Motor. See Page 128 for Reel Dimensions & Sizes. (lengths over 100' are spliced)
ooster The kron rass ooster Reel is designed to be light weight and extremely durable. There are more options than ever as these reels are available in multiple sizes, and in both electric and manual rewind.
More informationBVA Limited Lifetime Warranty
1 The V dvantage V Industrial Hydraulics was launched in 2005 and is centrally located in urope in tten-leur, The Netherlands. V is one of the Shinn u urope brands besides Omega Lift, Omega Mechanix and
More informationatalog /US asic eatures llen ey Sensor Locking lip ircuit ressure /12 5/32" Tube Instant onnections Driving ressure U xhaust ack ressure Thresho
Threshold Sensors... 2-3 locking Valves...4 3-Way, 2-osition Standard Duty... 5-8 Technical Data...9 Dimensions... 10-11 3-Way Miniature...12 Dimensions... Miniature and Standard Duty Limit Switches, ylinder
More informationAir Tube Disc Clutches and Brakes
ir Tube isc lutches and rakes Wichita ir Tube isc lutches and rakes provide the high speed acceleration and deceleration essential for today s process equipment. The low-inertia designs reduce power consumption
More informationQuick Coupling Products
Quick oupling Products atalog 3800 US February 2005 The World Standard Parker Locations Minneapolis, Minnesota rantsburg, Wisconsin Lincoln, Nebraska hetek, Wisconsin FILURE OR IMPROPER SELETION OR IMPROPER
More informationValve Products. B Series Valve
atalog 000- arker neumatic Valve, an exceptional performing industrial valve in a compact size with an enhanced flow range. vailable in solenoid pilot operated and remote air pilot models. he series features
More informationLX Hand Pump Oil. hand pumps - anti-sludge, anti-rust additives. HF oil - good low temperature performance. Dimensions (in) Model No. A-64 A-65 1.
Hydraulic Oil, Manifolds and Fittings Shown top to bottom: HF-, HF-, HF-2, LX-, 6, and FZ Enerpac System omponents HF Oil power pumps efficiency - prevents cavitation - anti-sludge, anti-rust, anti-foam
More informationHigh-Flow Stainless Tubes. Standard Tubes BRASS 18 LONG STAINLESS STEEL 18 LONG H11. All stainless construction for high strength and durability
High-Flow Stainless Tubes H11 ll stainless construction for high strength and durability Use with all PCS cascades J in part number indicates next largest thread TUE TUE L = 12 18 24 36 HF093T-.090.076
More informationMinimal Fitting Series
http://www.pisco.co.jp FITTING CONTROLLER VALVE TUE MAKE-TO-ORDER PRODUCTS Ultra-Small arb Fitting for Pneumatic Piping Fitting 266 Suitable for Vacuum Piping by a Combination with Vacuum Tube Suitable
More informationTube Applicable for nylon, soft nylon and polyurethane tubing.
Miniature Fittings Series M pplicable Tubing: ø3.2, ø4, ø6 onnection Thread:, M, arb onfiguration for easy insertion into the tube Holds the tube tightly ody With electroless nickel plated Low tightening
More informationL & S Series Linear Slides
& S Series inear Slides asic Selection S Series (short) single bearing block design, short overall length. (Photo this page) Series (long) double bearing block design, increased bearing support. (Photo
More informationTable of Contents. Numatics 2009 Rev. 1/09
Table of ontents RW Series...-8 eatures and Benefits... How To Order... Replacement omponents... imensions... 5 Technical Specifications... 6 Switch Information....7-8 Numatics 2009 Rev. /09 2 RW-Series
More informationVCR. Metal Gasket Face Seal Fittings. 1/16 to 1 in. and 6 to 18 mm sizes. High-purity stainless steels
www.swagelok.com Metal asket ace Seal ittings /6 to and 6 to 8 mm sizes igh-purity stainless steels The original design, the authentic brand 2 Metal asket ace Seal ittings ontents lands Page 4 odies Page
More informationMK Series High Performance Butterfly Submittal/Technical Data
MK Series igh Performance utterfly Submittal/Technical ata ray MK Series igh Performance utterfly Valves NSI lass 150 and 300 ray ontrols ommercial ivision 13788 West Road, Suite 200 ouston, Texas 77041
More informationPneufit C composite and Pneufit M fittings Inch Ø 1/8... 1/2 O/D tube
Pneufit composite and Pneufit M fittings Ø 1/8... 1/2 O/D tube Norgren Pneufit fittings are ready to use, offering fast assembly with no need for tools providing optimum flow. Pneufit offers a broad range
More informationIsys Micro Series. Valve Products. Operating information. Material specifications. Pilot configuration
atalog 000-3US The Valve System incorporates a space saving back to back valve mounting design, and achieves flow rates of 0.35 v per valve with valves having a combined width of mm. This plug-in valve
More informationTube Fitting Brass Series
http://www.pisco.co.jp FITTING ONTO VV TU MK-TO-OD PODUTS rass Push-In Fitting Type for Spatter-Proof Tube Fitting rass 212 N, FKM, N for Seal ubber Selection esistant to Flame and Weld Spatter Superior
More informationNEN Series NFPA Aluminum Cylinders
NEN Series NP luminum ylinders 1-1/2" to 4" bore sizes ompetitively priced Magnetic piston standard djustable cushion standard Sleeve nut construction standard Stocked strokes Technical data Medium: iltered
More informationSP30 - BJ - FCF50 - PU
SMART Plungers SP-FCF Series Features Always return back to original position (wide angle 42 ) No need tool for pad replacement Less friction for Level compensator Light weight and long life time Compact
More information3-Way Mixing and Sequencing Globe Valves, Flared (5/8 in. O.D.) with Electric, Hydraulic, and Pneumatic Actuators
lectric, Hydraulic, and Pneumatic ctuators TL 1. Select Valve ody including P ode (Valve Size, v Rating, Port ode) or select Valve ssemly correct (refer to Tale 3 and Tale 3 also) less ctuator ode (XXX)
More informationValve Products Viking Lite Valves
atalog 0697- arker neumatic alve roducts iking ite alves The iking ite valve range is robust, versatile and combines a large flow capacity with short change-over times, designer may choose /8, / or /8
More informationNAAMS Standards Compliant Power Clamp Cylinder ø50, ø63
NORMTON NMS Standards ompliant Power lamp ylinder ø5, ø6 Weight reduced by up to 8% luminum body with greatly reduced weight Suitable for robot material handling ore size KZ2N a New KZN-X2742 Reduction
More informationCombination Clutch/Brake
ombination lutch/brake For metalforming equipment Fast, smooth cycling ool running with higher torque ompact disc design Simple Installation Multiple mounting options for compatability with other competitive
More informationMechanical Style Pressure Switch. Specifications
or details about certified products conforming to international standards, visit us at www.smcworld.com. Mechanical Style Pressure Switch Series IS1000 Long service life: 5 million cycles IS1000-01 IS1000-01-X202
More information