VACUUM CUPS 2 SECTION 2 VACUUM CUPS 2: EDCO USA.
|
|
- Gerard Charles
- 5 years ago
- Views:
Transcription
1 VACUUM S SECTION VACUUM S 01 EDCO USA. :1
2 VACUUM S CONTENTS BELLOWS S (B) DOUBLE BELLOWS S (B) BELLOWS TRACTION FOOT S (BF) MULTI-BELLOWS S (BL) DEEP S (D) FLAT S (F) FLAT CONCAVE S (FC) OVAL CONCAVE & OVAL FLAT S (OC & OF) GENERAL INFORMATION Bellows Cups (B) :3 - :6 Double Bellows Cups (B) :7 Bellows Traction Foot Cups (BF) :8 Multi-Bellows Cups (BL) :9 Deep Cups (D) :10 Flat Cups (F) :11 - :14 Flat Concave Cups (FC) :15 Oval Concave Cups (OC) :16 Oval Flat Cups (OF) :16 Universal Cups (U) :17 - :18 Assembly Instructions :19 Elastomer Properties :19 Specialty Cups :0 UNIVERSAL S (U) : 01 EDCO USA.
3 VACUUM S SIZE MATERIAL 1 XP - B 15 N - 10M - 5 = 5mm A = Ameriflex See Cup BLANK = None 8 = 8mm CS = Conductive Fitting Section FD = P.E. Filter 10 = 10mm Silicone for available FS = S.S. Screen 15 = 15mm D = Duramax See Cup Fitting 0 = 0mm N = Nitrile S = Silicone Section for availability. V = Viton 1 All cups are available in Nitrile and Silicone. Check availability for other materials before ordering. FILTER All figures for shear load are 18 Hg. using a 0.5 coefficient of friction. Adjust coefficient of friction to suit your conditions, then apply a generous factor of safety (3:1 or greater) to shear loads [] 0.4 [6.1] 0. [5.6] XP-B [9.4] 0.06 [1.5] 5 mm WEIGHT: oz. (g) (0.11) INTERNAL VOLUME: cu. in. (cc) 0.01 (0.16) 6" Hg: lb. (N) (0.3) 18" Hg: lb. (N) 0.1 (0.4) MINIMUM RADIUS: in. (mm) 0.06 (1.5) SHEAR LOAD : lb. (N) 0.05 (0.) 0.08 [] 0.37 [9.4] 0.35 [8.9] XP-B [11.9] 0.13 [3.3] 8 mm WEIGHT: oz. (g) 0.01 (0.8) INTERNAL VOLUME: cu. in. (cc) 0.01 (0.16) 6" Hg: lb. (N) 0.18 (0.8) 18" Hg: lb. (N) 0.36 (1.6) MINIMUM RADIUS: in. (mm) 0.07 (1.8) SHEAR LOAD : lb. (N) 0.18 (0.8) 0.14 [3.7] 0.48 [1.] 0.43 [10.9] XP-B [16] 0.18 [4.5] 10 mm WEIGHT: oz. (g) 0.03 (0.85) INTERNAL VOLUME: cu. in. (cc) 0.03 (0.49) 6" Hg: lb. (N) 0.3 (1.3) 18" Hg: lb. (N) 0.8 (3.6) MINIMUM RADIUS: in. (mm) 0.16 (4.1) SHEAR LOAD : lb. (N) 0.4 (1.7) 0.14 [3.7] 0.7 [17.8] XP-B [0.1] 0. [5.1] 0.94 [3.9] XP-B [17.5] 0.64 [16.3] 0.6 [6.6] 15 mm WEIGHT: oz. (g) 0.04 (1.1) INTERNAL VOLUME: cu. in. (cc) 0.07 (1.) 6" Hg: lb. (N) 0.7 (3.1) 18" Hg: lb. (N) 1.3 (5.8) MINIMUM RADIUS: in. (mm) 0. (5.1) SHEAR LOAD : lb. (N) 0.7 (3.1) 0.88 [.4] 0.39 [9.9] 0 mm WEIGHT: oz. (g) 0.08 (.3) INTERNAL VOLUME: cu. in. (cc) 0.16 (.6) 6" Hg: lb. (N) 1.3 (5.8) 18" Hg: lb. (N). (9.8) MINIMUM RADIUS: in. (mm) 0.39 (9.9) SHEAR LOAD : lb. (N) 1.1 (4.8) 01 EDCO USA. :3
4 VACUUM S SIZE MATERIAL 1 XP - B 50 N - 10M - 30 = 30mm A = Ameriflex See Cup BLANK = None 40 = 40mm CS = Conductive Fitting Section FD = P.E. Filter 50 = 50mm Silicone for available FS = S.S. Screen 65 = 65mm D = Duramax N = Nitrile S = Silicone See Cup Fitting Section for availability. V = Viton 1 All cups are available in Nitrile and Silicone. Check availability for other materials before ordering. FILTER All figures for shear load are 18 Hg. using a 0.5 coefficient of friction. Adjust coefficient of friction to suit your conditions, then apply a generous factor of safety (3:1 or greater) to shear loads. XP-B [6.4] XP-B [7.4] 0. [5.1] 1.4 [36.1] 0.9 [7.4] 1.8 [46.] 1.34 [34] 0.59 [14.9] 30 mm WEIGHT: oz. (g) 0.5 (7.1) INTERNAL VOLUME: cu. in. (cc) 0.61 (10) 6" Hg: lb. (N).7 (1) 18" Hg: lb. (N) 4.9 (1.8) MINIMUM RADIUS: in. (mm) 0.59 (15) SHEAR LOAD : lb. (N).5 (11.1) 1.71 [43.4] 0.59 [14.9] 40 mm WEIGHT: oz. (g) 0.4 (11.3) INTERNAL VOLUME: cu. in. (cc) 0.9 (14.7) 6" Hg: lb. (N) 4.9 (1.8) 18" Hg: lb. (N) 8.8 (39.1) MINIMUM RADIUS: in. (mm) 0.79 (0.1) SHEAR LOAD : lb. (N) 4.4 (19.5) 0.36 [9.1] XP-B [34.5] 0.5 [1.7] XP-B [4.].3 [56.6].88 [73.].09 [53.1] 0.79 [0] 50 mm WEIGHT: oz. (g) 0.75 (1.3) INTERNAL VOLUME: cu. in. (cc).0 (3.8) 6" Hg: lb. (N) 7.4 (3.9) 18" Hg: lb. (N) 14.6 (64.9) MINIMUM RADIUS: in. (mm) 0.98 (4.9) SHEAR LOAD : lb. (N) 7.3 (3.4).76 [70.1] 0.9 [.9] 65 mm WEIGHT: oz. (g) 1.9 (36.5) INTERNAL VOLUME: cu. in. (cc) 3.9 (63.9) 6" Hg: lb. (N) 13.3 (59.) 18" Hg: lb. (N) 6.3 (117) MINIMUM RADIUS: in. (mm) 1. (31) SHEAR LOAD : lb. (N) 13.1 (58.3) :4 01 EDCO USA.
5 BELLOWS S SIZE MATERIAL XP - B 150 N - 1F 75 = 75mm N = Nitrile 110 = 110mm S = Silicone 150 = 150mm V = Viton See Cup Fitting Section for available All figures for shear load are 18 Hg. using a 0.5 coefficient of friction. Adjust coefficient of friction to suit your conditions, then apply a generous factor of safety (3:1 or greater) to shear loads. XP-B [85] 3.07 [77.9] 0.94 [3.8] A 1.46 [37] 75mm WEIGHT: oz. (g) 1.8 (51) INTERNAL VOLUME: cu. in. (cc) 6.7 (110) 6" Hg: lb. (N) 16 (71.) 18" Hg: lb. (N) 37 (164) MINIMUM RADIUS: in. (mm) 1.6 (40.6) SHEAR LOAD : lb. (N) 19 (84.5) MATERIALS N,S,V SUFFIX 18F 14F 38F 1F A: in. (mm) 1.97 (50) 1.97 (50) 1.97 (50) 1.97 (50) XP-B [166] 4.53 [156] 1.31 [33.].1 [53.8].48 [6.9].6 [66] 110mm WEIGHT: oz. (g) 5.1 (145) INTERNAL VOLUME: cu. in. (cc) 19 (311) 6" Hg: lb. (N) 30 (133) 18" Hg: lb. (N) 77 (34) MINIMUM RADIUS: in. (mm).4 (61) SHEAR LOAD : lb. (N) 39 (173.5) MATERIALS N,S,V XP-B [166].79 [70.8] 3.19 [81] 150mm WEIGHT: oz. (g) 13 (369) INTERNAL VOLUME: cu. in. (cc) 40 (656) 6" Hg: lb. (N) 66 (94) 18" Hg: lb. (N) 154 (685) MINIMUM RADIUS: in. (mm) 3.0 (76.) SHEAR LOAD : lb. (N) 77 (34) MATERIALS N,S,V 6.14 [156] 1.75 [44.4] 3.07 [77.9] 01 EDCO USA. :5
6 BELLOWS S MATERIAL XP - B50 NP - AQ NP = Neoprene AQ = Quad Mount S = Silicone Side Port, NPT P = Quad Mount Center Port, NPT Anodized aluminum fitting is bonded to rubber for maximum stability under shear loads 50mm & WEIGHT: lb. (kg) 3.57 (1.6) INTERNAL VOLUME: cu. in. (cc) 85.4 (1400) 18" Hg: lb. (N) 450 (00) MINIMUM RADIUS: in. (mm) 10 (54) SHEAR LOAD : lb. (N) 5 (1001) All figures for shear load are 18"Hg. using a 0.5 coefficient of friction. Adjust coefficient of friction to suit your conditions, then apply a generous factor of safety (3:1 or greater) to shear loads. AQ: ANSI MOUNT 1.59 [40.4] 3/8 NPTF 1.16 [9.5].56 [65] 3.18 [80.8].75 [69.9] 9.88 [51] 9.96 [53] 5/16-18 UNC x 0.39 MIN THD 4 Places 3.18 [80.8] 1.44 [36.6] P: METRIC MOUNT 3.3 [8] 1.6 [41.1] G1/8 NPSF 1.14 [9].75 [69.9].56 [65] 9.88 [51] 9.96 [53] G3/4 NPSF 1.6 [41.1] 3.3 [8] M8 x 1.5 x 10mm MIN THD 4 Places 1.44 [36.6] :6 01 EDCO USA.
7 DOUBLE BELLOWS S SIZE MATERIAL FILTER XP - B 50 N - 18F - FS 5 = 5mm A = Ameriflex See Cup FD = PE Filter 35 = 35mm D = Duramax Fitting Section FS = S.S. Screen 50 = 50mm N = Nitrile for available See Cup Fitting 65 = 65mm Section for availability. 0. [5.1] 0.94 [3.9] 1.0 [5.9] XP-B [18.8] 0.38 [9.7] 5 mm WEIGHT: oz. (g) 0.11 (3.1) INTERNAL VOLUME: cu. in. (cc) 0.18 (3) 6" Hg: lb. (N).0 (9) 18" Hg: lb. (N) 3.15 (14) MINIMUM RADIUS: in. (mm) 0.31 (7.9) 1.3 [33] 1.46 [37.1] 0. [5.1] XP-B [15] 1.04 [6.4] 35 mm WEIGHT: oz. (g) 0.8 (7.9) INTERNAL VOLUME: cu. in. (cc) 0.61 (10) 6" Hg: lb. (N) 3.37 (15) 18" Hg: lb. (N) 5.6 (5) MINIMUM RADIUS: in. (mm) 0.39 (9.9) 0.36 [9.1] XP-B [1.7] XP-B65.0 [50.8].08 [5.8] 1.46 [37.1].86 [7.6].37 [60.] 0.8 [0.8].78 [70.6] 1.3 [33] 50 mm WEIGHT: oz. (g) 0.85 (4.1) INTERNAL VOLUME: cu. in. (cc) 1.83 (30) 6" Hg: lb. (N) 8.3 (37) 18" Hg: lb. (N) 13.3 (59.) MINIMUM RADIUS: in. (mm) 1.6 (3) 65 mm WEIGHT: oz. (g). (63) INTERNAL VOLUME: cu. in. (cc) 5.85 (95.9) 6" Hg: lb. (N) 8.4 (37.4) 18" Hg: lb. (N) 1 (93.4) MINIMUM RADIUS: in. (mm) 1. (31) 01 EDCO USA. :7
8 BELLOWS TRACTION FOOT S BF S The BF-style cups combine the versatility of a bellows cup with a large anti-skid tread pattern to provide maximum holding power and high resistance to shear loads even when lubrication is present. BF cups are ideal for feeding sheet metal blanks to stamping presses or other robotic applications where it is necessary to resist loads caused by rapid acceleration and deceleration. SIZE MATERIAL XP - BF 80 N - 38F 80 = 80mm N = Nitrile 100 = 100mm S = Silicone ANTI-SKID TREAD PATTERN All figures for shear load are 18 Hg. using a 0.5 coefficient of friction. Adjust coefficient of friction to suit your conditions, then apply a generous factor of safety (3:1 or greater) to shear loads [.] Wrench Flat 3/8 NPSF XP-BF80-38F 1.56 [39.6] 0.88 [.] Wrench Flat 3/8 NPSF XP-BF100-38F 1.95 [49.5] 3.3 [83.8] 0.58 [14.7] 4.4 [11] 0.95 [4.1] 80 mm WEIGHT: oz. (g) 1.7 (48.) INTERNAL VOLUME: cu. in. (cc) 1.8 (9.5) 6" Hg: lb. (N) 17 (75.6) 18" Hg: lb. (N) 4 (187) MINIMUM RADIUS: in. (mm).8 (71.1) SHEAR LOAD : lb. (N) 45 (00) 100 mm WEIGHT: oz. (g).4 (68) INTERNAL VOLUME: cu. in. (cc) 4.9 (80.3) 6" Hg: lb. (N) 8 (15) 18" Hg: lb. (N) 78 (347) MINIMUM RADIUS: in. (mm) 3.6 (91.5) SHEAR LOAD : lb. (N) 53 (36) :8 01 EDCO USA.
9 MULTI BELLOWS S SIZE MATERIAL 1 1 All cups are available in Nitrile and Silicone. Check availability for other materials before ordering. FILTER XP - BL 50 N - 18F - FS 0 = 0mm A = Ameriflex See Cup BLANK = No Filter 30 = 30mm D = Duramax Fitting Section FD = P.E. Filter 40 = 40mm N = Nitrile for available FS = S.S. Screen 50 = 50mm S = Silicone V = Viton See Cup Fitting Section for availability. 0. [5.1] XP-BL [1.8] 0. [5.1] XP-BL [30.7] 0.79 [0.1] 0.51 [13] 0 mm WEIGHT: oz. (g) 0.07 () INTERNAL VOLUME: cu. in. (cc) 0.4 (3.9) 6" Hg: lb. (N) 0.7 (3.1) 18" Hg: lb. (N) 1.4 (6.) MINIMUM RADIUS: in. (mm) 0.16 (4.1) 1.18 [30] 0.79 [0.1] 30 mm WEIGHT: oz. (g) 0.1 (6) INTERNAL VOLUME: cu. in. (cc) 0.8 (13.1) 6" Hg: lb. (N) 1.4 (6.) 18" Hg: lb. (N) 3.6 (16) MINIMUM RADIUS: in. (mm) 0.31 (7.9) 0.9 [7.4] XP-BL [40.9] 0.36 [9.1] XP-BL50.01 [51.1] 1.57 [39.9] 0.98 [4.9] 1.97 [3.9] 1.1 [7.9] 40 mm WEIGHT: oz. (g) 0.43 (1.) INTERNAL VOLUME: cu. in. (cc) 1.6 (6.) 6" Hg: lb. (N).5 (11.1) 18" Hg: lb. (N) 4.9 (1.8) MINIMUM RADIUS: in. (mm) 0.6 (15.) 50 mm WEIGHT: oz. (g) 0.8 (3.) INTERNAL VOLUME: cu. in. (cc) 3.4 (55.7) 6" Hg: lb. (N) 3.8 (16.9) 18" Hg: lb. (N) 9.6 (4.7) MINIMUM RADIUS: in. (mm) 0.6 (15.) 01 EDCO USA. :9
10 DEEP S SIZE MATERIAL 1 XP - D 50 N - 10M - FILTER 15 = 15mm A = Ameriflex See Cup BLANK = None 0 = 0mm D = Duramax Fitting Section FD = P.E. Filter 30 = 30mm N = Nitrile for available FS = S.S. Screen 40 = 40mm S = Silicone See Cup Fitting 50 = 50mm V = Viton Section for availability [3.6] XP-D [16.3] 1 All cups are available in Nitrile and Silicone. Check availability for other materials before ordering [16.3] 0.1 [3] 0.8 [7.1] 0. [5.1] XP-D [1.4] 15 mm WEIGHT: oz. (g) 0.03 (0.9) INTERNAL VOLUME: cu. in. (cc) 0.06 (1) 6" Hg: lb. (N) 0.65 (.8) 18" Hg: lb. (N) 1.7 (7.5) MINIMUM RADIUS: in. (mm) 0.4 (6.1) 0.85 [1.6] 0.18 [4.6] 0.6 [6.6] 0 mm WEIGHT: oz. (g) 0.05 (1.4) INTERNAL VOLUME: cu. in. (cc) 0.1 () 6" Hg: lb. (N) 1.3 (5.7) 18" Hg: lb. (N) 3.3 (14.6) MINIMUM RADIUS: in. (mm) 0.3 (8.1) 0.9 [7.4] XP-D [4.9] 0. [5.1] 1.3 [31.] XP-D30 0. [5.1] 0.7 [17.8] 0.4 [10.7] 30 mm WEIGHT: oz. (g) 0.11 (3.1) INTERNAL VOLUME: cu. in. (cc) 0.3 (5) 6" Hg: lb. (N) 3.1 (13.8) 18" Hg: lb. (N) 5.8 (5.8) MINIMUM RADIUS: in. (mm) 0.51 (13) XP-D [4.] 0.31 [7.9] 0.64 [16.3] 0.36 [9.1] 1. [30.5] 40 mm WEIGHT: oz. (g) 0.3 (8.5) INTERNAL VOLUME: cu. in. (cc) 0.8 (13) 6" Hg: lb. (N) 5.4 (4) 18" Hg: lb. (N) 11.3 (50.3) MINIMUM RADIUS: in. (mm) 0.65 (16.5).05 [5.1] 0.39 [9.9] 50 mm WEIGHT: oz. (g) 0.54 (15.3) INTERNAL VOLUME: cu. in. (cc) 1.4 (3) 6" Hg: lb. (N) 8.1 (36) 18" Hg: lb. (N) 17 (75.6) MINIMUM RADIUS: in. (mm) 0.98 (4.9) 0.73 [18.5] :10 01 EDCO USA.
11 FLAT S SIZE MATERIAL 1 FILTER XP - F 0 N - 18F - FS 15 = 15mm A = Ameriflex See Cup BLANK = No Filter 0 = 0mm D = Duramax Fitting Section FD = P.E. Filter 5 = 5mm N = Nitrile for available FS = S.S. Screen 30 = 30mm S = Silicone V = Viton See Cup Fitting Section for availability. 1 All cups are available in Nitrile and Silicone. Check availability for other materials before ordering. All figures for shear load are 18 Hg. using a 0.5 coefficient of friction. Adjust coefficient of friction to suit your conditions, then apply a generous factor of safety (3:1 or greater) to shear loads. BOTTOM VIEW All Flat cups have cleats on the bottom [3.6] XP-F [11.4] 0. [5.1] XP-F [8.6] 0.65 [16.5] 0.03 [0.8] 0.87 [.1] 0.06 [1.5] 15 mm WEIGHT: oz. (g) 0.03 (0.85) INTERNAL VOLUME: cu. in. (cc) 0.0 (0.33) 6" Hg: lb. (N) 0.8 (3.6) 18" Hg: lb. (N) 1.9 (8.5) MINIMUM RADIUS: in. (mm) 0.51 (13) SHEAR LOAD : lb. (N) 0.9 (4) 0 mm WEIGHT: oz. (g) 0.05 (1.4) INTERNAL VOLUME: cu. in. (cc) 0.06 (1) 6" Hg: lb. (N) 1.3 (5.8) 18" Hg: lb. (N) 3.3 (14.7) MINIMUM RADIUS: in. (mm) 0.71 (18) SHEAR LOAD : lb. (N) 1.7 (7.6) 0.0 [5.1] XP-F [9.4] 0.0 [5.1] XP-F [10.4] 1.06 [6.9] 0.06 [1.5] 1.6 [3] 0.09 [.3] 5 mm WEIGHT: oz. (g) 0.06 (1.7) INTERNAL VOLUME: cu. in. (cc) 0.07 (1.) 6" Hg: lb. (N).0 (8.9) 18" Hg: lb. (N) 4.3 (19.1) MINIMUM RADIUS: in. (mm) 0.98 (4.9) SHEAR LOAD : lb. (N).1 (9.3) 30 mm WEIGHT: oz. (g) 0.08 (.7) INTERNAL VOLUME: cu. in. (cc) 0.1 () 6" Hg: lb. (N).7 (1) 18" Hg: lb. (N) 5.6 (4.9) MINIMUM RADIUS: in. (mm) 0.98 (4.9) SHEAR LOAD : lb. (N).8 (1.5) 01 EDCO USA. :11
12 FLAT S SIZE MATERIAL 1 FILTER XP - F 50 N - 18F - FS 40 = 40mm A = Ameriflex See Cup BLANK = No Filter 50 = 50mm D = Duramax Fitting Section FD = P.E. Filter 65 = 65mm N = Nitrile for available FS = S.S. Screen S = Silicone V = Viton See Cup Fitting Section for availability. 1 All cups are available in Nitrile and Silicone. F65 is not available in Silicone or Viton. Check availability for other materials before ordering. All figures for shear load are 18 Hg. using a 0.5 coefficient of friction. Adjust coefficient of friction to suit your conditions, then apply a generous factor of safety (3:1 or greater) to shear loads. BOTTOM VIEW 0.3 [7.6] XP-F [14] All Flat cups have cleats on the bottom [4.] 0.10 [.5] 40 mm WEIGHT: oz. (g) 0.18 (5.1) INTERNAL VOLUME: cu. in. (cc) 0.9 (4.8) 6" Hg: lb. (N) 4.5 (0) 18" Hg: lb. (N) 9.0 (40) MINIMUM RADIUS: in. (mm).05 (5.1) SHEAR LOAD : lb. (N) 4.5 (0) XP-F [9.1] XP-F [17.5] 0.5 [1.7].09 [53.1] 0.1 [3].76 [70.1] 0.15 [3.8] 0.8 [0.8] 50 mm WEIGHT: oz. (g) 0.4 (11.3) INTERNAL VOLUME: cu. in. (cc) 0.61 (10) 6" Hg: lb. (N) 8.1 (36) 18" Hg: lb. (N) 16.6 (73.8) MINIMUM RADIUS: in. (mm).17 (55.1) SHEAR LOAD : lb. (N) 8.3 (36.9) 65 mm WEIGHT: oz. (g) 0.51 (14.5) INTERNAL VOLUME: cu. in. (cc) 1.46 (4) 6" Hg: lb. (N) 9 (40) 18" Hg: lb. (N) (98) MINIMUM RADIUS: in. (mm) 5.5 (140) SHEAR LOAD : lb. (N) 11 (49) :1 01 EDCO USA.
13 FLAT S SIZE MATERIAL XP - F 150 N - 1F 75 = 75mm N = Nitrile 110 = 110mm S = Silicone 150 = 150mm V = Viton See Cup Fitting Section for available BOTTOM VIEW All figures for shear load are 18 Hg. using a 0.5 coefficient of friction. Adjust coefficient of friction to suit your conditions, then apply a generous factor of safety (3:1 or greater) to shear loads. XP-F [77.] 0.13 [3.3] A 0.53 [13.5] 75 mm WEIGHT: oz. (g) 1.0 (8.3) INTERNAL VOLUME: cu. in. (cc) 1. (19.7) 6" Hg: lb. (N) 18 (80.1) 18" Hg: lb. (N) 45 (00) MINIMUM RADIUS: in. (mm) 5.9 (150) SHEAR LOAD : lb. (N) 3 (10) SUFFIX 18F 14F 38F 1F A: in. (mm) 1.07 (6.4) 1.07 (6.4) 1.07 (6.4) 1.07 (6.4) XP-F [31.8] 4.46 [113] 0.1 [5.3] 0.78 [19.8] 1.13 [8.7] 110 mm WEIGHT: oz. (g) 3.1 (87.9) INTERNAL VOLUME: cu. in. (cc) 4.3 (70.5) 6" Hg: lb. (N) 3 (14) 18" Hg: lb. (N) 94 (418) MINIMUM RADIUS: in. (mm) 9.8 (49) SHEAR LOAD : lb. (N) 47 (09) XP-F [15] 0.33 [8.4] 1.4 [36.1] 1.0 [5.9] 1.30 [33] 150 mm WEIGHT: oz. (g) 7.3 (07) INTERNAL VOLUME: cu. in. (cc) 9.8 (161) 6" Hg: lb. (N) 67 (98) 18" Hg: lb. (N) 191 (850) MINIMUM RADIUS: in. (mm) 19.7 (500) SHEAR LOAD : lb. (N) 95 (4) 01 EDCO USA. :13
14 FLAT S Anodized aluminum fitting is bonded to rubber for maximum stability under shear loads AQ: ANSI MOUNT 1.59 [40.4] MATERIAL XP - F40 NP - AQ NP = Neoprene AQ = Quad Mount S = Silicone Side Port P = Quad Mount Center Port 3/8 NPTF 1.16 [9.5] 1.50 [38.1] 40mm & WEIGHT: lb. (kg).8 (1.7) INTERNAL VOLUME: cu. in. (cc) 33 (541) 18" Hg: lb. (N) 450 (00) MINIMUM RADIUS: in. (mm) 0 (508) SHEAR LOAD : lb. (N) 5 (1001) All figures for shear load are 18"Hg. using a 0.5 coefficient of friction. Adjust coefficient of friction to suit your conditions, then apply a generous factor of safety (3:1 or greater) to shear loads [80.8].75 [69.9] 9.70 [46] 5/16-18 UNC x 0.39 MIN THD 4 Places 3.18 [80.8] 0.6 [15.7] P: METRIC MOUNT 1.6 [41.1] G1/8 NPSF 1.14 [9] 1.50 [38.1] 3.3 [8].75 [69.9] 9.70 [46] G3/4 NPSF 3.3 [8] 1.6 [41.1] M8 x 1.5 x 10mm MIN THD 4 Places 0.6 [15.7] :14 01 EDCO USA.
15 FLAT CONCAVE S MATERIAL XP - FC50 N - 18F - FS A = Ameriflex D = Duramax N = Nitrile Concave cleats on the bottom. See Cup Fitting Section for available BOTTOM VIEW FILTER FD = PE Filter FS = S.S. Screen See Cup Fitting Section for availability [9.1] 0.7 [18.3] 50 mm WEIGHT: oz. (g) 0.3 (7.9) INTERNAL VOLUME: cu. in. (cc) 0.7 (11.5) 6" Hg: lb. (N) 7.8 (34.7) 18" Hg: lb. (N) 19 (84.5) MINIMUM RADIUS: in. (mm).09 (53.1) SHEAR LOAD : lb. (N) 10 (44.5) All figures for shear load are 18"Hg. using a 0.5 coefficient of friction. Adjust coefficient of friction to suit your conditions, then apply a generous factor of safety (3:1 or greater) to shear loads [50] 0.5 [6.4] MATERIAL XP - FC 75 N - 38F N = Nitrile S = Silicone 38F = 3/8 NPSF Female G38M = G3/8 BSPP Male All figures for shear load are 18"Hg. using a 0.5 coefficient of friction. Adjust coefficient of friction to suit your conditions, then apply a generous factor of safety (3:1 or greater) to shear loads. Concave cleats on the bottom. 8mm Hex Socket BOTTOM VIEW 3/8 NPSF XP-FC75-38F 1.46 [37.1] G1/8 NPSF G3/8 BSPP O-ring Seal XP-FC75-G38M 1.3 [33.5].95 [74.9] 0.36 [9.1] 0.93 [3.6].95 [74.9] 0.36 [9.1] 0.93 [3.6] 75 mm WEIGHT: oz. (g) 1.7 (48.) INTERNAL VOLUME: cu. in. (cc) 1.8 (9.5) 6" Hg: lb. (N) 17 (75.6) 18" Hg: lb. (N) 35 (154) MINIMUM RADIUS: in. (mm).8 (71.1) SHEAR LOAD : lb. (N) 45 (00) 75 mm WEIGHT: oz. (g) 1.7 (48.) INTERNAL VOLUME: cu. in. (cc) 1.8 (9.5) 6" Hg: lb. (N) 17 (75.6) 18" Hg: lb. (N) 35 (154) MINIMUM RADIUS: in. (mm).8 (71.1) SHEAR LOAD : lb. (N) 45 (00) 01 EDCO USA. :15
16 FLAT CONCAVE S MATERIAL XP - FC 100 N - 1F N = Nitrile S = Silicone BOTTOM VIEW Fits size 75 cup fittings. See Cup Fitting Section for available Concave cleats on the bottom. All figures for shear load are 18"Hg. using a 0.5 coefficient of friction. Adjust coefficient of friction to suit your conditions, then apply a generous factor of safety (3:1 or greater) to shear loads [100] XP-FC [1.] 1.07 [7.] 100 mm WEIGHT: oz. (g) 1.9 (54) INTERNAL VOLUME: cu. in. (cc) 4.9 (80.3) 6" Hg: lb. (N) 31 (138) 18" Hg: lb. (N) 64 (85) MINIMUM RADIUS: in. (mm) 4.3 (109) SHEAR LOAD : lb. (N) 53 (36) A SUFFIX 18F 14F 38F 1F A: in. (mm) 1.58 (40.1) 1.58 (40.1) 1.58 (40.1) 1.58 (40.1) OVAL S STYLE 1.5 [38.1] 5.5 [139.7] MATERIAL OF - 60X140 N - G OC = Smooth N = Nitrile BLANK = NPTF Bottom S = Silicone G = BSPP OF = Cleated Bottom 1.5 [38.1] 1 O-ring Seal.5 [63.5] PORTS 1.0 [5.9] TECHNICAL DATA OC OF DIMENSIONS 60mm X 140mm 60mm X 140mm STROKE: in. (mm) 0.9 (7.4) 0.18 (4.6) WEIGHT: oz. (g) 4.1 (116) 4. (119) INTERNAL VOLUME: cu. in. (cc) 3. (5.4) 3.0 (49.) 6" Hg: lb. (N) 9 (19) 9 (19) 18" Hg: lb. (N) 83 (369) 83 (369) MINIMUM RADIUS: in. (mm) 1.5 (38.1) 3.0 (76.) SHEAR LOAD : lb. (N) 41 (18) 41 (18) All figures for shear load are 18"Hg. using a 0.5 coefficient of friction. Adjust coefficient of friction to suit your conditions, then apply a generous factor of safety (3:1 or greater) to shear loads. CONNECTIONS CODE FUNCTION Standard (NPT) -G (BSPP) 1 Vacuum Port 3/8 NPTF G3/8 BSPP Mounting Holes 5/16-18 UNC M8 x 1.5 NPT ports are Standard, add suffix "-G" for optional BSPP ports. OC-60X140 OF-60X140 :16 01 EDCO USA.
17 UNIVERSAL S SIZE MATERIAL 1 XP - U 8 N - 10M - FILTER 4 = 4mm A = Ameriflex See Cup BLANK = No Filter 6 = 6mm D = Duramax Fitting Section FD = P.E. Filter 8 = 8mm N = Nitrile for available FS = S.S. Screen 10 = 10mm S = Silicone See Cup Fitting 15 = 15mm V = Viton Section for availability. 1 All cups are available in Nitrile and Silicone. Check availability for other materials before ordering [] XP-U6 0.6 [6.6] 0.08 [] 0.0 [5.1] XP-U4 0.4 [6.1] [0.] 4 mm WEIGHT: oz. (g) (0.09) INTERNAL VOLUME: cu. in. (cc) 0.00 (0.03) 6" Hg: lb. (N) 0.04 (0.) 18" Hg: lb. (N) 0. (0.9) MINIMUM RADIUS: in. (mm) 0.1 (3) 0.8 [7.1] 0.01 [0.3] 6 mm WEIGHT: oz. (g) (0.14) INTERNAL VOLUME: cu. in. (cc) (0.05) 6" Hg: lb. (N) 0.11 (0.5) 18" Hg: lb. (N) 0.38 (1.7) MINIMUM RADIUS: in. (mm) 0. (5.1) 0.08 [] 0.35 [8.8] XP-U8 0.8 [1.1] 0.0 [0.5] 0.14 [3.6] XP-U [10.4] 8 mm WEIGHT: oz. (g) (0.14) INTERNAL VOLUME: cu. in. (cc) (0.1) 6" Hg: lb. (N) 0. (1) 18" Hg: lb. (N) 0.65 (.9) MINIMUM RADIUS: in. (mm) 0.4 (6.1) 0.43 [10.9] 0.0 [0.5] 10 mm WEIGHT: oz. (g) 0.03 (0.85) INTERNAL VOLUME: cu. in. (cc) (0.18) 6" Hg: lb. (N) 0.34 (1.5) 18" Hg: lb. (N) 1.0 (4.5) MINIMUM RADIUS: in. (mm) 0.31 (7.9) 0.14 [3.6] 0.65 [16.5] XP-U [11.4] 0.06 [1.5] 15 mm WEIGHT: oz. (g) 0.03 (0.85) INTERNAL VOLUME: cu. in. (cc) (0.51) 6" Hg: lb. (N) 0.8 (3.6) 18" Hg: lb. (N) 1.9 (8.5) MINIMUM RADIUS: in. (mm) 0.31 (7.9) 01 EDCO USA. :17
18 UNIVERSAL S SIZE MATERIAL 1 FILTER XP - U 30 N - 18F - FS 0 = 0mm A = Ameriflex See Cup BLANK = No Filter 5 = 5mm D = Duramax Fitting Section FD = P.E. Filter 30 = 30mm N = Nitrile for available FS = S.S. Screen 40 = 40mm S = Silicone See Cup Fitting 50 = 50mm V = Viton Section for 1 All cups are available in Nitrile and Silicone. availability. Check availability for other materials before ordering. 0. [5.1] 0.87 [.1] XP-U [8.6] 0.1 [.5] 0. [5.1] XP-U [9.7] 0 mm WEIGHT: oz. (g) 0.04 (1.1) INTERNAL VOLUME: cu. in. (cc) 0.06 (1) 6" Hg: lb. (N) 1.3 (5.8) 18" Hg: lb. (N).7 (1) MINIMUM RADIUS: in. (mm) 0.51 (13) 1.06 [6.9] 0.9 [7.4] 0.1 [.5] XP-U [14] 5 mm WEIGHT: oz. (g) 0.06 (1.7) INTERNAL VOLUME: cu. in. (cc) 0.07 (1.1) 6" Hg: lb. (N).0 (8.9) 18" Hg: lb. (N) 4.4 (19.6) MINIMUM RADIUS: in. (mm) 0.65 (16.5) 0. [5.1] 1.6 [3] XP-U [10.4] 0.14 [3.6] 30 mm WEIGHT: oz. (g) 0.07 () INTERNAL VOLUME: cu. in. (cc) 0.1 () 6" Hg: lb. (N).7 (1) 18" Hg: lb. (N) 5.6 (4.9) MINIMUM RADIUS: in. (mm) 0.79 (0.1) 1.66 [4.] 0.18 [4.6] 40 mm WEIGHT: oz. (g) 0.17 (4.8) INTERNAL VOLUME: cu. in. (cc) 0.34 (5.6) 6" Hg: lb. (N) 4.5 (0) 18" Hg: lb. (N) 8.8 (39.1) MINIMUM RADIUS: in. (mm) 1.18 (30) 0.36 [9.1].09 [53.1] XP-U [17.5] 0.4 [6.1] 50 mm WEIGHT: oz. (g) 0.35 (9.9) INTERNAL VOLUME: cu. in. (cc) 0.73 (1) 6" Hg: lb. (N) 7.9 (35.1) 18" Hg: lb. (N) 16.4 (73) MINIMUM RADIUS: in. (mm) 1.38 (35.1) :18 01 EDCO USA.
19 ASSEMBLY Fitting Assembly Secure a block tee or other suitable pipe fitting in a vise to make a simple fixture as shown in the illustration. Screw the cup fitting onto the fixture about thread turns- by hand. Dip your finger into a small container of water and wipe a few drops onto the fitting flange and into the top chamfer and bore of the suction cup. Use only water- no soap, nor oil. Water will quickly evaporate and leave no residue to later affect the cup s performance. Invert the suction cup and place it onto the flange as shown. Grasp the far side of the cup and pull it over the flange while pressing downward. After the cup snaps over the flange, rotate the cup on the fitting about ½ turn to make sure it is properly seated. ELASTOMER PROPERTIES CODE ELASTOMER A D Ameriflex Duramax Excellent Excellent -4 F to 30 F -0 C to 110 C -4 F to 30 F -0 C to 110 C Yellow White N Nitrile -4 F to 30 F (Buna-N) Excellent -0 C to 110 C 1.0 Black S Silicone Good -100 F to 400 F -70 C to 05 C 1.06 Orange CS Conductive -100 F to 400 F Good Silicone -70 C to 05 C 1.06 Black V Flourocarbon 40 F to 450 F (Viton)* Excellent 4 C to 30 C 1.78 Grey * Viton is a registered trademark of Du Pont Dow Elastomers. **Continuous service temperature. Intermittent service may possibly be higher. Determine via testing under actual conditions. ***Weight of nitrile cup without fitting is tabulated. Use the weight ratio multiplier to calculate the weights of Silicone and Viton cups. ELASTOMER SELECTION WEAR RESISTANCE If the cup will be exposed to oil or chemicals, select the most compatible rubber material. AMERIFLEX (A): For general-purpose normal ambient temperature applications as a replacement for competitors PVC vinyl cups. DURAMAX (D): Softer non-staining, non-marking, general-purpose material for high-visibility surfaces at normal ambient temperature. NITRILE (N): For general-purpose normal ambient temperature applications. SILICONE (S): For either cold or high-temperature applications or where greater flexibility will improve conformance to a part. CONDUCTIVE SILICONE (CS): For grounding parts such as electronic chips to eliminate static electricity. VITON (V): For extremely high-temperature applications in automotive, appliance or other applications where silicone is not allowed. 01 EDCO USA. :19 **WORKING TEMPERATURE WEIGHT RATIO*** COLOR Durometer Shore-A NOTE: The terms non-staining and non-marking refer only to the cup material. Airborne aerosols that attach to the cup surface or direct cup contact with dirty surfaces can result in residue transfer marks, so proper maintenance is important. Use denatured alcohol to wipe cups clean after installation and periodically afterward to remove airborne contaminants
20 SPECIALTY S N (NITRILE) WOODWORKING CLAMP PAD 4.9 (15).95 (75) 0.66 (16.7) REPLACES # [5.6] EGG 0.5 [1.7] BELLOWS, BLUE PVC (9.5) 0.5 (1.7) 3.04 [77.] (1.6) (41.6) 0.63 [16].05 (5) V3-38B (3/8" STEM) REPLACES VC-3C 1.38 [35] EC34S-30R DESIGNED TO HANDLE A WIDE RANGE OF EGG SIZES :0 01 EDCO USA.
CUP ACCESSORIES SECTION 4 FLOW VALVES, CHECK VALVES, MECHANICAL VALVES, SWIVEL JOINTS, & TEE ADAPTORS EDCO USA.
CUP ACCESSORIES SECTION FLOW ALES, CHECK ALES, MECHANICAL ALES, SWIEL JOINTS, & TEE ADAPTORS 0 EDCO USA. www.edcousa.net : CUP ACCESSORIES CONTENTS DUAL FLOW ALE TRI-FLOW ALE FLOW SENSOR ALE RELEASE CHECK
More informationCatalog Hydraulic Couplings High Pressure
High Pressure 3 Series Threaded Actuation Design Threaded Sleeve The 3 Series coupling are designed for high pressure applications. The coupler sleeve and nipple body must be manually threaded together
More informationMETAL IMPREGNATED SILICONE
VACUUM CUPS VACUUM CUP MATERIALS There are various reasons for choosing a particular vacuum cup material. The first choice is normally the hardness. This will determine the ability of a vacuum cup to seal
More informationPerformance Data. Temperature Range. -20 o to 160 o F 26 Hg to 125 psi. C v Flow Rate (scfm) Fill Time Exhaust. Port.
Control Valves & Valve Accessories PNEUMADYNE, INC. Catalog 00 Phone 76-559-077 Fax 76-559-0547 Features Single stem design Compact size Four input options Numerous porting configurations Fully ported
More informationSECTION 6 VACUSTAT, PRESSURE SENSORS, VACUUM SENSORS, & FILTERS
SYSTEM ACCESSORIES SECTI 6 VACUSTAT, PRESSURE SENSORS, VACUUM SENSORS, & FILTERS 6 2012 EDCO USA. www.edcousa.net 6:1 6 SYSTEM ACCESSORIES CTENTS VACUSTAT MECHANICAL PRESSURE SWITCH INLINE VACUUM FILTER
More informationThe following valve actuators are compatible with all Clippard MAV, MAVO, MJV, MJVO, ES-1, & FV series valves.
VALVE ACTUATORS The following valve actuators are compatible with all Clippard MAV, MAVO, MJV, MJVO, ES-1, & FV series valves. One of the most versatile items in the Clippard line. Permits wide circuit
More informationValves, Fittings, and Manifolds Catalog. We make things MOVE
Valves, Fittings, and Manifolds Catalog We make things MOVE We Make Things Move A forward-thinking innovator, Bimba provides industry-leading pneumatic, hydraulic and electric motion solutions that are
More informationQUICK SELECTION GUIDE
SELECTION GUIDE SAE HYDRAULIC 4-BOLT AND SPLIT FLANGED FITTINGS IN CARBON STEEL AND STAINLESS STEEL ISO 14001 Registered Environmental Management ISO 9001 Registered Quality Management OHSAS 18001 Registered
More informationClippard offers more types of miniature pneumatic cylinders for the MINIMATIC CYLINDER
MINIMATIC CYLINDER Clippard offers more types of miniature pneumatic cylinders for the designer s convenience, including: spring return, spring extend, air retract, double-acting and double rod models.
More informationControl Valves & Valve Accessories
Control Valves & Valve Accessories PNEUMADYNE, INC. Catalog 400 Phone 76-559-077 Fax 76-559-0547 Stainless Steel 0- Fully Ported valve with M5 threads available- contact factory Viton is a registered trademark
More informationNDP-50 Specifications
NDP-50 Specifications Port Dimensions Intake & discharge connection: (164 GPM Max.) Polypropylene (PPG) 2" ANSI B16.5 #150 Kynar (PVDF) 2" ANSI B16.5 #150 Aluminum (ADC-12) 2" ANSI B16.5 #150 (with tapped
More informationFLOW CONTROLLERS Instrument/Analyzer Products. Catalog 4513/USA April 2003
FLOW CONTROLLERS Instrument/Analyzer Products Catalog 4513/USA April 2003 FLOW CONTROLLERS Instrument/Analyzer Products Catalog 4513/USA April 2003 table of contents SC420 Series............. 1-2 SC423XL
More informationCast Iron Liquid Relief Valves
Cast Iron Liquid Relief Valves Features Bolted bonnet permits easy inspection and servicing without removal from system. Quality cast iron body and bonnet, insert and disc are available in either bronze
More informationSERIES PA SWING ARM CLAMPS for the Automotive Industry
Pa SERIES PA SWING ARM CLAMPS for the Automotive Industry Ideal for a wide variety of automated part holding and transfer applications Copper Arm Switches Installed ORDERING DATA: SERIES PA CLAMPS INDEX:
More informationacting, spring return, spring extend and double rod models. Hall Effect sensors and magnetic piston versions are also available.
AIR FORCE ONE COMPACT CYLINDER Clippard Instrument Laboratory, Inc. Air Force One compact cylinders are available in double acting, spring return, spring extend and double rod models. Hall Effect sensors
More informationneedle valves Needle Valves
Needle Valves Index At a Glance 1 1700 Series 5 Forged Body, Integral Bonnet Needle Valves 2100 Series 8 Bar Stock, Screwed Bonnet Needle Valves 2200 Series 12 Bar Stock, Screwed Bonnet Needle Valves 2219
More informationneedle valves Needle Valves
Needle Valves Index At a Glance 1 1700 Series 5 Forged Body, Integral Bonnet Needle Valves 2100 Series 8 Bar Stock, Screwed Bonnet Needle Valves 2200 Series 12 Bar Stock, Screwed Bonnet Needle Valves 2219
More informationFIT-2. Inch. Ø Â" to Ë" O/D tube
For simple and quick assembly of pneumatic circuits. Positive tube connection. Wide range of types available. Reliable and corrosion resistant. Specifications Fluid: Compressed air, nitrogen, inert and
More informationSMS Solid Stainless Cylinders
SMS Solid Stainless Cylinders Space Saving and Conventional Lengths Pneumatic to 200 PSI Hydraulic 400 to 500 PSI Non shock /8,, 2, 3 Bore 300 Series Stainless Exterior Assures Aesthetics and Function
More informationEmergency Shear Valves
Emergency Shear Valves 0060 Underpump Emergency Valve The Emco Wheaton 0060 Emergency Shear Valve incorporates a replaceable shear section and a heat sensitive fusible link assembly. The valve can be manually
More informationKunkle Models 91/218/228 liquid relief valves Safety and relief products
Cast iron liquid relief valves with bronze trim including models UL and FM approved for fire pump installations Model 228 Features Bolted bonnet allows easy inspection and servicing without removal from
More informationAS-Interface Installation Manual. ASAHI / AMERICA, Inc. Thermoplastic Valves and Piping Systems
AS-Interface Installation Manual Page 1 of 9 Rev A April 16, 2003 ASAHI / AMERICA, Inc. Thermoplastic Valves and Piping Systems 35 GREEN STREET PO BOX 653 MALDEN, MA. 02148 AS-Interface Installation Manual
More informationKunkle Models 91/218/228 liquid relief valves Safety and relief products
Cast iron liquid relief valves with bronze trim including models UL and FM approved for fire pump installations Model 8 Features Bolted bonnet allows easy inspection and servicing without removal from
More informationSeries HB Solid Brass Cylinders
Series HB Solid Brass Cylinders For General Industrial Use in most nvironments 00 PSI Pneumatic 500 PSI Hydraulic Non shock,, /8,, Bores Magnetic piston available to operate Aurora stainless proximity
More information855 Filtrate Pump, Close Coupled and Overhead Mounted Pumps
855 Filtrate Pump, Close Coupled and Overhead Mounted Pumps Technical Specification Pages This page left intentionally blank. 1.0 Overview. The 855 Series is Carver s offering specifically designed to
More informationNDP-25 Specifications
NDP-25 Specifications Port Dimensions (46.2 GPM Max.) Intake & discharge connection: Polypropylene (PPG) Kynar (PVDF) Aluminum (ADC-12) Stainless Steel (316) Cast Iron Air inlet (incl. ball valve): Air
More informationKeystone F89 pneumatic quarter-turn actuator General purpose / hazardous area
Compact, reliable and low operation costs for all types of quarter-turn valves are the keywords of the Keystone F89 range of pneumatic actuators Features Direct mounting to all Keystone butterfly valves
More informationKEYSTONE F89 pneumatic quarter-turn actuator GENERAL PURPOSE / HAZARDOUS AREA
compact, reliable and low operation costs for all types of quarter-turn valves are the keywords of the Keystone F89 range of pneumatic actuators FEATURES Direct mounting to all Keystone butterfly valves
More informationThermoplastic Couplings
Thermoplastic ouplings Thermoplastics -1 Quick oupling Division Thermoplastic ouplings Table of ontents Thermoplastics oupling Selection Guide...-3 Spectrum Series...-4 Specifications...-4 ouplers...-5
More informationCompression Fittings. Brass Compression Fittings. Stainless Steel Compression Fittings. PL Nickel-Plated Brass Spigot Fittings
Compression Fittings Compression Fittings Stainless Steel Compression Fittings PL Nickel-Plated Spigot Fittings Compression Fittings Compression Fittings Compression Fittings (P. 5-5) Stainless Steel Compression
More informationParallel Grippers- DPDS DIRECTCONNECT Modular Series
Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (8) 426-548 www.cmafh.com 1.134 Parallel Grippers- DPDS DIRECTCONNECT Modular Series Mounting Information: Grippers
More informationSECTIO N 15 Phone: (866) Fax: (888)
PVC FITTINGS SCHEDULE 40, 80, INSERT NYLON FITTINGS PVC & CPVC NIPPLES SECTIO N 15 www.cbsupplies.ca Phone: (866) 503-5523 Fax: (888) 562-2095 AGI@cbsupplies.ca PRODUCTS LIST SCHEDULE 40 PVC PRESSURE FITTINGS
More informationBrass Compression Fitting Range
Compression Fitting Range Fittings Stud Fittings 0105 BSPT Page 5-9 0105 NPT Page 5-9 0101 BSPP/Metric Page 5-10 0101..39 BSPP Page 5-10 0101 Metric Page 5-11 01 BSPP Page 5-11 0109 BSPT Page 5-12 0109
More informationOrder from MARYLAND METRICS P.O. Box 261 Owings Mills, MD USA web:
Push-In Fittings LF 3000 LF 3200: 3 mm LIQUIfit LF 300 LF 300/ LF 3900 LF 0 PARKER LEGRIS Industrial Connector Systems Products are available from: MARYLAND METRICS P.O. Box 21 Owings Mills, MD 21117 USA
More informationThread and Connector Identification
How to Use this Section This section is intended as an aid to identifying the most popular threads on hydraulic hose couplings and adaptors, and hydraulic equipment. BSP, Metric, American and Japanese
More informationConnectors & Connectors with valves
Connectors & Connectors with valves Inside... Omnifit Cap instructions... Small Bore Connectors... 3 with valves... Large Bore Connectors... 5 with valves... 5 T Block Connector... 6 In-line Connectors...
More informationValves. Model Code Breakdown. Valves. Steel High Pressure Steel Ball Valves. Steel High Pressure Steel Ball Valves
Steel Ball Steel Ball Model Code Breakdown AB2 N1-1/2 _ 1 1 D B Valve Series Connection Type/Size N NPTF Pipe Thread S SAE Straight Thread Adapter & Stem Seals B Buna - Standard V Viton Bore Restriction
More informationLeft: Custom EOAT spring levelers, vacuum fitting and cup assembly. Right: Vacuum fitting and Vacuum cup. Ø D E B VCF1-1032M
Vacuum up Fittings Ideal pplications: utomation assembly fixtures Robotic end effectors nd-of-rm Tooling devices Left: ustom OT spring levelers, vacuum fitting cup assembly. Right: Vacuum fitting Vacuum
More informationSECTION 7 AX SERIES PUMPS
SECTION X SERIES PUMPS EDCO US www.edcousa.net : X PUMPS Z - ZERO BSE G /8 NPSF G / NPSF LRGE CPCITY G / NPSF General Information : Z: Zero Base (No Base) :4 G/8 NPSF Bases :5 - :6 G/ NPSF Bases : - :
More informationPneufit Inch Series Push-In Tube Fittings 1/8" to 1/2" Tube Sizes UNF to 1/2" NPT Thread Options
Section 1 Pneufit Inch Series Push-In Tube Fittings to 1/2" Tube Sizes 10-32 UNF to 1/2" NPT Thread Options Inch Series Product Numbering System..................FIT-1-2 Inch Series Shapes and odes.........................fit-1-3
More informationModels 910, 911, 916, 917, 920, 921, 927 ASME Section VIII, Air/Gas/
Models 910, 911, 916, 917, 920, 921, 927 ASME Section VIII, Air/Gas/ Steam/Liquid, UV National Board Certified. Also available for Vacuum Service Model 921: Steel body and bonnet with plain lift lever
More informationGRB. long life Compact Angular gripper SHIPS IN 1-2 days. Major Benefits. Industry Uses
long life Compact Angular gripper SHIPS IN 1-2 days hardened steel jaws have robust design and include dowel holes for precise tooling location steel cover, jaw design, and tight jaw slots minimize external
More informationStandard suction cups
BLOCK CYLINDER Double acting V E R I N S HYDRAULIQUE Standard suction cups AND Inserts for standard suction cups VCN SERIE ISO seals Maximum working pressure: 500 bar Bore: Ø 25 to Ø 125 mm 1 Selecting
More informationPressure Sensor No Series
Sales Manual Section 335 PRODUCT SPECIFICATION 84372 SERIES Pressure Sensor No. 84372-Series GENERAL DESCRIPTION The patented* No. 84372-Series Pressure Sensor contains a weatherproof, snap-acting valve
More informationQ U I C K C O U P L I N G S, C O U P L E R A D A P T E R S & R E P L A C E M E N T T I P S Engineered, Machined and Assembled in the USA Since 1969
Q U I C K C O U P L I N G S, C O U P L E R A D A P T E R S & R E P L A C E M E N T T I P S Engineered, Machined and Assembled in the USA Since 1969 warning statement! WARNING Failure, improper use or improper
More informationDP Series Specifications
DP Series Specifications DP-10 Port Dimensions Intake & discharge connection: Polypropylene (PPG) Aluminum (ADC-12) Stainless Steel (316) (6 GPM Max.) 3/8" Female NPT 3/8" Female NPT 3/8" Female NPT DP-15
More informationGlass Tube Full-View Flowmeters
Data Sheet Brooks 1110 and 1140 Series Glass Tube Full-View Flowmeters Model 1110 Full-View Flowmeter (NPT Connections) Model 1140 Full-View Flowmeter (Flange Connections) FEATURES AND BENEFITS Wide choice
More informationKEYSTONE F89 PNEUMATIC QUARTER-TURN ACTUATOR GENERAL PURPOSE / HAZARDOUS AREA
FEATURES Direct mounting to all Keystone butterfly valves and ball valves. Valve connection compatible with Keystone (imperial and metric) and ISO 5211. Double Rack and Pinion design nullifies side loads
More informationToggle Valve s. OG, 1G, and 92 Series. Manual and pneumatically actuated models. Straight, angle, and cross body patterns
www.swagelok.com Toggle Valve s OG,, and 92 Series Manual and pneumatically actuated models Straight, angle, and cross body patterns 316 SS and brass body materials Features Compact, rugged design Opens
More informationSAE FLANGES V C. Specialists in VESCOR. Hydraulic Reservoirs and Accessories
SAE FLANGES V C VESCOR Specialists in Hydraulic Reservoirs and Accessories V C TABLE OF CONTENTS V C General Information / Split Flange Clamp............................page 1 Welding Information / Simplified
More information1 (25mm): Acrylic Others: Glass standard, hermetically sealed
Description & Features: A general purpose, versatile 1" (25mm) to 6" (150mm) dial, 304 stainless steel thermometer Bi-metallic sensing element for reliable readings Back, bottom or adjustable angle connection
More informationSeries HB Solid Brass Cylinders
Series HB Solid Brass Cylinders or General Industrial Use in most nvironments 00 PSI Pneumatic 500 PSI Hydraulic Non shock,, /8, /, Bores Magnetic piston available to operate Aurora stainless proximity
More informationBrass Compression Fitting Range
Compression Fitting Range Fittings Stud Fittings 05 BSPT Page 5-9 05 NPT Page 5-9 01 BSPP/Metric Page 5-01..39 BSPP Page 5-01 Metric Page 5-11 0114 BSPP Page 5-11 09 BSPT Page 5-12 09 NPT Page 5-12 0199
More informationVacuum Filters. Catalogue Edition 2
Vacuum Filters Catalogue Edition 2 INLINE VACUUM FILTERS Vacuforce plastic in-line filters provide easy monitoring, economy and safety. These shatterproof filters are 100% airtight, can withstand high
More informationTable of Contents ISO
Table of Contents ISO 6432...3-12 Features and Benefits...3 How to Order....4 Dimensions Single Rod End, Single and Double Acting...5 Single and Double Acting-Double Rod...6 Mounting Accessories...7-10
More informationModel descriptions. 2. For other pressure and temperature limits, consult ANSI B16 cast iron flange standards.
VALVES & CONTROLS KUNKLE SAFETY AND RELIEF PRODUCTS Cast Iron Liquid Relief Valves Model 228 Model descriptions Model 91: Bronze trim, with pressure-tight cap. Suitable for maximum back pressure of 60
More information82 Series Fittings Table of Contents
Table of Contents ase Part Number with Description Table of Contents (page 1 of 1)... Page Number 30182 Male NPTF Pipe - Rigid Straight... -234 31382 Male NPTF Pipe - Swivel - Straight... -235 30282 Female
More informationSELECTION CHARTS 100 Ports Order No. Style psig/6 bar Inlet Outlet Exhaust 112
SELECTION CHARTS 4-Way s Flow @ 100 Ports Order No. Style psig/6 bar Inlet Outlet Exhaust TV-4D Spool 7.5 scfm #10-32 #10-32 holes in body D 126 TV-4D-M5 Spool 180 l/min M5 M5 holes in body D 126 TV-4M
More informationSMS Solid Stainless Cylinders
SMS Solid Stainless Cylinders Space Saving and Conventional Lengths Pneumatic to 200 PSI Hydraulic 400 to 500 PSI Non shock /8, /2, 2, 3 Bore 300 Series Stainless Exterior Assures Aesthetics and Function
More informationATMOSPHERIC PRESSURE RATINGS ATMOSPHERIC PRESSURE RATINGS
FEET OF WATER TO INCHES OF MERCURY (BASED AT SEA LEVEL) FT. OF WATER IN. OF MERCURY FT. OF WATER IN. OF MERCURY 1 0.9 18 15.9 2 1.8 20 17.7 4 3.5 22 19.4 6 5.3 24 21.2 8 7.1 26 23.0 10 8.8 28 24.8 12 10.6
More informationSeries 1-HK to 8-HK 34 SOCKETS (inches) Size Brass Steel Stainless Steel (female) Across (inch) Standard UL Listed Standard High Impulse NPTF
Series HK Series 1-HK to 8-HKP Series 10-HK, 1 & 20-HK Series HK Couplings are designed for general purpose hydraulic service. Some are suitable for use with various liquids, chemicals, steam, gases and
More information1-20 (25mm-500mm) SERIES 20/21 Wafer/Lug SANITARY AND CHEMICAL / RESILIENT SEATED BUTTERFLY VALVES. The High Performance Company
BUTTERFLY VALVES SANITARY AND CHEMICAL / RESILIENT SEATED SERIES 20/21 Wafer/Lug 1-20 (25mm-500mm) The High Performance Company SERIES 20 1-20 (25mm-500mm) Bray Controls is proud to offer a high quality
More informationTHE ORIGINAL MODULAR HOSE SYSTEM
THE ORIGINAL MODULAR HOSE SYSTEM CONTENTS THE LOC-LINE SYSTEM 4 CUSTOMIZED SOLUTIONS 5 1/4" SYSTEM 6 1/2" SYSTEM 10 3/4" SYSTEM 14 QUICK-SET SHIELD 15 2-1/2" SYSTEM 16 HIGH PRESSURE TURRET NOZZLES 18
More informationO-Ring Swivel Joints
O-Ring Swivel Joints O-Ring Parts Identification List 1. O-ring (dust) seal 2. ball retainer screw 3. O-ring (pressure) seal 4. grease fitting 5. ball bearings O-Ring he O-ring pressure seal ensures a
More informationFor securing wire terminals, cables, connectors, and other samples for pull testing [36.8] 1.0 [25.4]
For securing wire terminals, cables, connectors, and other samples for pull testing. G1001 0-0.125 [0-3.1] G1001-1 0.29 [0.13] 3.40 [86.4] 0.125 - [3.1-6.3] 1.45 [36.8] G1001-2 - 0.375 [6.3-9.5] Includes
More informationBA-350 Series (Medical Gas Service) 3-Piece Bronze Ball Valve With Extended Copper-Tube Ends
BA-350 Series (Medical Gas Service) 3-Piece Bronze Ball Valve With Extended Copper-Tube Ends 3-Piece, Full-Port, Bronze Ball Valve Extended-Tube Ends Ideal for use in medical gas systems, pharmaceutical
More informationVersa-Matic. Operating Manual. 3/8" Bolted Plastic Pumps. Polypropylene Kynar
Versa-Matic Operating Manual 3/8" Bolted Plastic Pumps Polypropylene Kynar E8 SAFETY WARNINGS Read these instructions completely before installation and start-up. It is the responsibility of the purchaser
More informationTBM. Bi-Metal Thermometer
Description & Features: A general purpose, versatile 1 (25mm) to 6 (150mm) dial, 304 stainless steel thermometer Bi-metallic sensing element for reliable readings Back, bottom or adjustable angle connection
More information3 PC FULL BORE BALL VALVE
Pressure (Bar) 3 PC FULL BORE BALL VALVE 3 PC FULL BORE 1000PSI STAINLESS STEEL THREADED/SOCKET WELD END BALL VALVE Feature: 3 PC Body Design Full Bore, Quarter turn operation Size: 1/4 4 (DN8-100) Working
More informationSeries HB Solid Brass Cylinders
Series HB Solid Brass Cylinders or General Industrial Use in most nvironments 00 PSI Pneumatic 500 PSI Hydraulic Non shock,, /8, /, Bores Magnetic piston available to operate Aurora stainless proximity
More informationE8 Mini-Matic 3/8" Bolted Plastic Pumps Operating Instructions
E8 Mini-Matic 3/8" Bolted Plastic Pumps Operating Instructions Polypropylene SAFETY WARNINGS Read these instructions completely before installation and start-up. It is the responsibility of the purchaser
More informationSECTION 15 Breakaway Couplers
SECTION Breakaway Couplers Make Model Page Intertraco Intertraco Intertraco Intertraco Intertraco Intertraco Series A & B Breakaway Couplers Series J, N & P Breakaway Couplers Series E & S Breakaway Couplers
More informationHolley Ford 351W Hi-Ram Modular Intake Manifold Kits
Holley Ford 351W Hi-Ram Modular Intake Manifold Kits Holley P/N Engine Application & Induction Configuration 300-241 Hi-Ram, 1 x 95mm LS Throttle Body (longitudinal mount) w/ port EFI provisions & fuel
More information2 PC FULL BORE BALL VALVE
Pressure (Bar) 2 PC FULL BORE 1000PSI STAINLESS STEEL THREADED BALL VALVE Feature: 2 PC Body Design Full Bore, Quarter turn operation Size: 1/4 4 (DN8-100) Working Pressure: 1000 PSI / 2000 PSI Threaded
More informationDelivering Peak Performance. High-pressure liquid and gas flow control solutions for the oil and gas industry s harshest environments
Delivering Peak Performance High-pressure liquid and gas flow control solutions for the oil and gas industry s harshest environments A leading brand of high pressure valves, tubing, fittings and accessories,
More informationSELECTION CHARTS. 4-Way Valves. 112 Clippard Instrument Laboratory, Inc Toggle Valves. Stem Valves. Momentary/Detented
SELECTION CHARTS -Way Valves Flow (@ 100 Ports Order No. Style psig/7 bar) Inlet Outlet Exhaust Normally-Open Normally-Closed Momentary/Detented Brass Toggle Plastic Toggle Page No. Toggle Valves Stem
More informationOUNCES PRESSURE REGULATOR
OUNCES PRESSURE REGULATOR BACK PRESSURE TO VACUUM APPLICATIONS: To maintain ounces of positive pressure on systems flowing into a downstream vacuum, such as vapor recovery systems. PRESSURE RANGE: Upstream:
More information1/8 NPT (F) 1/8 NPT (F)
Control Valves & Valve Accessories PNEUMADYNE, INC. Catalog 400 Phone 76-559-077 Fax 76-559-0547 Features l Compact size (.5 OAL) l 4 Porting configurations l High flow l Single stem design l Plumbing
More informationMicroCoat System Operating Manual MC4000 Series MC785M, MC785M-WF Spray Valves
MicroCoat System Operating Manual MC Series MC785M, MC785M-WF Spray Valves A NORDSON COMPANY Introduction The MicroCoat System provides precise lubrication control for metal stamping operations. The MC
More informationD-Series Rack & Pinion Pneumatic Actuators
D-Series Rack & Pinion Pneumatic Actuators Introduction 2 Bettis D-Series pneumatic rack and pinion actuators provide its users with reliability and economy in valve automation. Specifically designed for
More informationDE-STA-CO VACUUM PRODUCTS
Vacuum Cups Cup Mounts DE-STA-CO VACUUM PRODUCTS MARCH 2009 Manifolds CAD FILES AVAILABLE ONLINE Vacuum Products Table of Contents Vacuum Cups US Patent# 7,309,089 Vacuum Cup Families and Features...Page
More informationDescription. Rhino SD2/XD2 Follower Modules
Rhino SD/XD Follower Modules Description See Figure. The follower module attaches onto the hydraulic section of the pump (). It is designed to force material out of straight-sided containers. Standard
More informationOUNCES PRESSURE REGULATOR
OUNCES PRESSURE REGULATOR VACUUM BACK PRESSURE TO VACUUM APPLICATIONS: Vacuum distribution systems, compressor suction regulation to prevent excessive vacuum on wells. A minimum of 10 psi instrument gas
More informationAir/Hydraulic Actuators
Air/Hydraulic Actuators master cylinders, stem seal master cylinders, and stem seal actuators with air chambers Convert Air Pressure to Hydraulic Pressure Air/Hydraulic Actuators Catalog Index Foreword..................
More informationXYTRQ X-Series Price List, Notes & Clarifications
Page 1 of 6 TABLE OF CONTENTS Double Acting (DA) Models and Optional Adders Page 2 Spring Return (SR) Models and Optional Adders Page 2 Additional Actuator Options; Page 2 NAMUR Mounting Plate Position
More informationSwagelok Alternative Fuel Ser vice (AFS) Ball Valves
www.swagelok.com Swagelok Alternative Fuel Ser vice (AFS) Ball Valves For High-Pressure, High-Flow Applications Swagelok AFS Ball Valves Working pressures up to 6000 psig (413 bar) Flow coefficients (C
More informationQUALITY HYDRAULIC PRODUCTS
QUALITY HYDRAULIC PRODUCTS N.R.P. ISO9001 Certified Quality System NRP- JONES Has What it Takes to Build Your Business! Over a half-century of experience helps you build customer satisfaction while increasing
More informationTBM. Bi-Metal Thermometer
Description & Features: A general purpose, versatile 1" (25mm) to 6" (150mm) dial, 304 stainless steel thermometer Bi-metallic sensing element for reliable readings Back, bottom or adjustable angle connection
More informationSMA Aluminum Cylinders
SMA Aluminum Cylinders PNEUMATIC TO 200 PSI HYDRAULIC 250 TO 400 PSI Non shock /8,, 2, 3 BORE SPACE SAVING AND CONVENTIONAL DESIGNS REPAIRABLE Very high quality Pancake type cylinders with all of the engineering
More information2010 EDITION PART 2. Butterfly, Gate, Globe, Needle & Diaphragm Valves. Thermoplastic Valves, Strainers & Accessories
PART Thermoplastic Valves, Strainers & Accessories Butterfly, Gate, Globe, Needle & Valves See Spears On-line Catalog for most current pricing, updated daily. P R E V E N T I O N L O S S C E R T I F I
More informationLeak Test Connector Selection Guide
Leak Test Connector Selection Guide Introduction to FasTest Leak Testing Today... Since 1985, FasTest advanced engineering creates connecting solutions that are easier, safer and more reliable while dramatically
More informationEQUIPMENT & ACCESSORIES
0011 O-RING BOSS REPLACEMENT RINGS 00026 BSP O-RINGS FOR RECESSED PORT ADAPTERS Part Number O-Ring ID Wall Dia 0011-02 0.239" 0064" 0011-03 0.301" 0064" 0011-04 0.351" 0072" 0011-05 0.414" 0072" 0011-06
More informationBreathers. BF...3 & BF...4 Series INNOVATIVE FLUID POWER. ø D1 HEX. Specifications. Hydraulic Symbols. Model Code. Dimensions BF P 3 G 10 W 1.0 /.
BF...3 & BF...4 Series Maximum flow rate - 31 scfm / 230 gpm at 0.04 bar Epoxy coated steel cap Zinc-plated internals Threaded connection Pressurized breather with relief valve (optional - BF3 only) Phenolic
More informationQuick Coupling Products
Quick Coupling Products Quick Couplings, Swivels, Valves, Diagnostic Equipment Catalog 3800 USA February 2014 Locations Grantsburg, WI Chetek, WI Union City, PA FAILURE OR IMPROPER SELECTION OR IMPROPER
More informationPRESSURE REGULATORS PRESSURE REDUCING. APPLICATION: Regulation of inlet pressure to gas compressors. Control of supply or distribution system pressure
PRESSURE REDUCING APPLICATION: Regulation of inlet pressure to gas compressors. Control of supply or distribution system pressure PRESSURE RANGE: Upstream: 10 psig to 300 psig Downstream: 10 psig to 300
More informationThe friction free alternative
Rolling The Rolling Diaphragm Air Cylinder The advent of the long stroke rolling diaphragm as a means of low-friction dynamic sealing has led to the development of the ControlAir Diaphragm Air Cylinder.
More informationMedium Pressure Filters
Medium Pressure Filters Medium pressure filters can be used in applications up to 2 psi (1379 kpa). Donaldson offers both spin-on and in-line cartridge-style filters. Medium Pressure Filters MEDIUM PRESSURE
More informationLeak Test Connector Selection Guide
Leak Test Connector Selection Guide Introduction to FasTest Leak Testing Today... Since 1985, FasTest advanced engineering creates connecting solutions that are easier, safer and more reliable while dramatically
More informationFlow meters, Flow switches and Flow transmitters
MAX FLOW SIZES FROM 80 TO 500 GPM (300 TO 1800 LPM) MAX LIQUID PRESSURE 300 PSI (20.69 BAR) LN SERIES MAX LIQUID PRESSURE 1000 PSI (68.97 BAR) LE SERIES Flow meters, Flow switches and Flow transmitters
More informationTABLE OF CONTENTS 8000 SERIES RACE HOSE ENDS 3000 SERIES RACE HOSE ENDS
TABLE OF CONTENTS Technical Specifications & Torque Table Page 2 Featured Products Page 3 Series 2000 Pro-Flow Race Hose Ends Page 4-8 Series 2000 Expander Hose Ends Page 7 Series 2000 Reducer Hose Ends
More information