FIT-2. Inch. Ø Â" to Ë" O/D tube
|
|
|
- Kenneth Harvey
- 5 years ago
- Views:
Transcription
1 For simple and quick assembly of pneumatic circuits. Positive tube connection. Wide range of types available. Reliable and corrosion resistant. Specifications Fluid: Compressed air, nitrogen, inert and non-combustible gases compatible with materials of construction. Note: For other types of fluids or compressed gases, please consult factory. Working Pressure: 29.5" Hg vacuum to 260 psig (750 mm Hg to 18 bar) Note: Flow Control working pressures: 5 to 150 psig (.3 to 10 bar) Working Temperature: 0 to 175 F (-20 to 80 C) Request viton option on selected part numbers for extended temperature range : 0 to 350 F (-20 to 180 C) Materials Body, swivel fitting and collet: Nickel plated brass O-ring: Silicone free Nitrile Sealing washer (parallel male threads): silicone free nitrile Tubing: Nylon 11 or 12, Polyurethane (95 durometer or above) and LDPE (Low Density Polyethylene). Note: Lower durometer polyurethane may be used, however, an internal tube support is required to prevent internal collapse of the tube wall. Thread Sealant: Precote 5 thread sealant is factory applied to the circumference of tapered male threads. Dimensions es (mm) T O.D. Tube S Tubing Stop V 1/8'' 0.09 (2.3) 0.53 (13.5) 0.26 (6.5) 5/32'' (4) 0.11 (2.8) 0.55 (14.0) 0.30 (7.5) 3/16'' 0.13 (3.4) 0.59 (15.1) 0.38 (9.7) 1/4'' 0.17 (4.4) 0.61 (15.5) 0.42 (10.7) 5/16'' (8) 0.24 (6.0) 0.65 (16.5) 0.51 (13.0) 3/8'' 0.30 (7.6) 0.83 (21.0) 0.59 (15.1) 1/2'' 0.38 (9.6) 0.96 (24.3) 0.71 (18.1) Tube stop 'O'-ring V ØS T Collet Recommended tightening torques Thread Tightening torque ft lbs (Nm) UNF.75 1 (1-1.4) 1/8" NPT ( ) 1/4" NPT ( ) 3/8" NPT ( ) 1/2" NPT ( ) Tube O.D.'s and Tube Tolerances O.D. Tube Tolerances Tube O.D. Nylon Polyurethane 1/8" to 1/2" " (+0.05 mm) ±0.005" (3 mm to 14 mm) " (-0.10 mm) (±0.12 mm) Internal hexagon Body Thread sealant FIT-2
2 Pneufit Union O/D Part Tube Number 1/8" /8" to 1/4"* /32" /16" /4" /16" /8" /2" * Reducing union with 1/8" and 1/4" connections Pneufit Conversion Union ( tube to mm tube) MM Number 5/ / / / / / Pneufit Double Male Union (Brass) O/D Part Stem Number 1/8" /32" /16" /4" /16" /8" /2" Pneufit Tube End Expander/Reducer Tube Stem Number Reducing 1/8" 5/32" /8" 1/4" /32" 1/4" /32" 5/16" /32" 3/8" /16" 1/4" /16" 5/16" /4" 5/16" /4" 3/8" /4" 1/2" /16" 3/8" /16" 1/2" /8" 1/2" Expanding 1/4" 1/8" /4" 5/32" /4" 3/16" Pneufit Bulkhead Union O/D Metric Part 1/8" M10 x /32" M10 x /16" M12 x /4" M14 x /16" M16 x /8" M20 x /2" M24 x Pneufit Union Elbow O/D Part Tube Number 1/8" /32" /16" /4" /16" /8" /2" Pneufit Double Male Union (Plastic) O/D Part Stem Number 5/32" C /16" C /4" C /16" C /8" C /2" C Pneufit Union Tee O/D Part Tube Number 1/8" /32" /16" /4" /16" /8" /2" FIT-3
3 FIT-4 Pneufit Parallel Union Y * Tube Tube Number 5/32" 5/32" /32" 1/4" /4" 1/4" /16" 5/16" *Body Material: Thermoplastic Pneufit Stem Y * Tube Stem Number 5/32" 5/32" /32" 1/4" /4" 1/4" /16" 5/16" *Body Material: Thermoplastic Pneumatic Male dapter 1/8" UNF /8" 1/ /8" 1/ /8" 1/ /32" UNF /32" 1/ /32" 1/ /16" 1/ /16" 1/ /4" UNF /4" 1/ /4" 1/ /4" 3/ /16" 1/ /16" 1/ /16" 3/ /8" 1/ /8" 1/ /8" 3/ /8" 1/ /2" 1/ /2" 3/ /2" 1/ Pneufit Straight dapter O/D G Part 1/4" M5x /4" G 1/ /4" G 1/ /8" G 1/ /8" G 3/ /2" G 3/ /2" G 1/ Pneufit Male dapter - Conversion (mm O.D. Tube to NPTF [Male] Thread) B Part O/D Tube NPT Thread Number / / / / / / / / / / / / / / / / / Pneufit Female Bulkhead dapter Tube Female Number 1/4" 1/ /8" 1/ Pnuefit Male dapter - Conversion ( O.D. Tube to ISO R [Male] Thread) O/D ISO R Part 1/8" 1/ /8" 1/ /32" 1/ /32" 1/ /4" 1/ /4" 1/ /4" 3/ /16" 1/ /16" 1/ /16" 3/ /8" 1/ /8" 1/ /8" 3/ /8" 1/ /2" 1/ /2" 3/ /2" 1/
4 Pneufit Self Sealing (Checked) dapter ( tube to NPT) 5/32" 1/ /4" 1/ /4" 1/ /16" 1/ Pneufit Stem dapter 3/32" /32" 1/ /32" 1/ /4" 1/ /4" 1/ /16" 1/ /16" 1/ /8" 1/ /8" 3/ /2" 3/ /2" 1/ Pneufit Stem dapter (mm O.D. Stem to NPT [Male] Thread) Stem Thread Number 4 1/ / / / Pneufit Stem dapter ( O.D. Stem to ISO R Thread) O/D ISO R Part Stem Thread Number 5/32 1/ /32 1/ /4 1/ /4 1/ /16 1/ /16 1/ /8 1/ /8 3/ /2 3/ /2 1/ CUTION: Swivel adapters are not suitable for use in continuously rotating or gyrating applications. Pneufit Female dapter 1/8" 1/ /8" 1/ /32" 1/ /32" 1/ /4" 1/ /4" 1/ /16" 1/ /16" 1/ /8" 1/ /8" 3/ Pneufit Fixed Male Elbow 1/8" 1/ /32" 1/ /32" 1/ /16" 1/ /16" 1/ /4" 1/ /4" 1/ /4" 3/ /16" 1/ /16" 1/ /8" 1/ /8" 1/ /8" 3/ /8" 1/ /2" 1/ /2" 3/ /2" 1/ Pneufit Swivel Male Elbow 1/8" UNF /8" 1/ /8" 1/ /32" UNF /32" 1/ /32" 1/ /16" 1/ /16" 1/ /4" UNF /4" 1/ /4" 1/ /4" 3/ /16" 1/ /16" 1/ /8" 1/ /8" 1/ /8" 3/ /8" 1/ /2" 1/ /2" 3/ /2" 1/ FIT-5
5 Pneufit push-in fittings CUTION: Swivel adapters are not suitable for use in continuously rotating or gyrating applications. CUTION: Swivel adapters are not suitable for use in continuously rotating or gyrating applications. CUTION: Swivel adapters are not suitable for use in continuously rotating or gyrating applications. Pneufit Extended Swivel Male Elbow 5/32" 1/ /32" 1/ /4" 1/ /4" 1/ /8" 1/ /8" 3/ Pneufit Swivel Male Elbow 1/4" M5x /4" G1/ /4" G1/ /8" G1/ /8" G3/ /2" G3/ /2" G1/ Swivel Female Elbow 1/8" 1/ /32" 1/ /32" 1/ /4" 1/ /4" 1/ /16" 1/ /8" 1/ /2" 3/ Pneufit Swivel Male Tee 1/8" UNF /8" 1/ /8" 1/ /32" UNF /32" 1/ /32" 1/ /16" 1/ /16" 1/ /4" 1/ /4" 1/ /4" 3/ /16" 1/ /16" 1/ /8" 1/ /8" 1/ /8" 3/ /8" 1/ /2" 1/ /2" 3/ /2" 1/ CUTION: Swivel adapters are not suitable for use in continuously rotating or gyrating applications. *Material: Thermoplastic Pneufit Swivel Male Side Tee 1/8" UNF /8" 1/ /8" 1/ /32" UNF /32" 1/ /32" 1/ /16" 1/ /16" 1/ /4" 1/ /4" 1/ /4" 3/ /16" 1/ /16" 1/ /8" 1/ /8" 1/ /8" 3/ /8" 1/ /2" 1/ /2" 3/ /2" 1/ Pneufit Male Swivel Y* 5/32'' 1/ /32'' 1/ /4'' 1/ /4'' 1/ /8'' 3/ Pneufit Banjo Elbow 1/8'' 1/8 12 R /32'' UNF 12 R /32'' 1/8 12 R /4'' 1/8 12 R /4'' 1/4 12 R /4'' 3/8 12 R /8'' 1/4 12 R /8'' 3/8 12 R Pneufit Banjo Tee 5/32'' UNF 12 R /4'' 1/8 12 R /4'' 1/4 12 R /8'' 1/4 12 R /8'' 3/8 12 R FIT-6
6 * Material: Nickel plated Brass Pneufit Plug* O/D Part Stem Number 1/8'' /32'' /16'' /4'' /16'' /8'' /2'' C Pneufit Manifold** O/D B O/D C NPT Product Tube D D D D D D **Body material PBT Pneufit Barb dapter B Part O/D Stem Hose Bore Number 1/8'' 1/8'' /32'' 1/8'' /4'' 3/16'' /8'' 5/16'' /2'' 3/8'' Pneufit Manifold** O/D B O/D Part Inlet Outlet Number D D D D **Body material PBT FIT-7
Fittings Metal Push-To- Connect Fittings. We make things MOVE
Fittings Metal Push-To- Connect Fittings We make things MOVE Contents 3 Fittings 4 Product Features 4 Push-In Fittings 4 Features and Benefits 5 How it Works 5 Materials of Construction 5 Fluid 5 Operating
FITTINGS, CONTROLS AND ACCESSORIES
, CONTROLS AND ACCESSORIES Regardless of your application, Norgren has fittings and accessories to complete your pneumatic package. Norgren has an extensive lineup of Pneufit push-in fittings in metric
Pneufit Inch Series Push-In Tube Fittings 1/8" to 1/2" Tube Sizes UNF to 1/2" NPT Thread Options
Section 1 Pneufit Inch Series Push-In Tube Fittings to 1/2" Tube Sizes 10-32 UNF to 1/2" NPT Thread Options Inch Series Product Numbering System..................FIT-1-2 Inch Series Shapes and odes.........................fit-1-3
Function Fittings, Flow Controls, and Accessory Valves
Section 3 Function Fittings, Flow ontrols, and Accessory Valves 12 VA Right Angle (anjo) Flow ontrol (inch-knob adj.)..fit-3-3 12 V Right Angle (anjo) Flow ontrol (inch-slot adj.)...fit-3-3 1 TA Right
Pneufit C composite and Pneufit M fittings Inch Ø 1/8... 1/2 O/D tube
Pneufit composite and Pneufit M fittings Ø 1/8... 1/2 O/D tube Norgren Pneufit fittings are ready to use, offering fast assembly with no need for tools providing optimum flow. Pneufit offers a broad range
LF 3600 Push-In Fittings Range
LF 300 Push-In Fittings Range Stud Fittings Straights 375 BSPT Page 1-97 301 BSPP/Metric Page 1-97 31 Metric Page 1-97 31 BSPP/Metric Page 1-9 321 BSPT Page 1-9 331 BSPP/Metric Page 1-9 300 Page 1-9 Push-In
Male stud fittings. Male stud elbow. Fluid... Working pressure... Vacuum level... Rated temperature...
FITTINGS Push - in fittings 431 Series Fluid... Working pressure... Vacuum level... Rated temperature... Torque... Standards... Materials... Compressed air Max. 20 bar (290 psi) 55 mm Hg vacuum (99 %)
Pneufit C composite and Pneufit M fittings Inch
Pneufit composite and Pneufit M fittings Inch Ø 1/8... 1/2 O/D tube Norgren Pneufit fittings are ready to use, offering fast assembly with no need for tools providing optimum flow. Pneufit offers a broad
LF 3600 Push-In Fittings
LF 300 In order to meet your technical and environment requirements, Parker Legris designed this range of metal fittings, offering robustness, reliability and resistance to industrial fluids for the most
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD USA web:
Push-In Fittings LF 3000 LF 3200: 3 mm LIQUIfit LF 300 LF 300/ LF 3900 LF 0 PARKER LEGRIS Industrial Connector Systems Products are available from: MARYLAND METRICS P.O. Box 21 Owings Mills, MD 21117 USA
Rapid push-in fittings for plastic tubes Series 1000
CATALOGUE > Release 8.5 > Rapid fittings Series 1000 Rapid push-in fittings for plastic tubes Series 1000 Tube external diameters: 5/3, 6/, 8/6, 10/8, 12/10, 15/12,5 mm Fittings threads: metric (M5, M6,
for plastic tubes CONNECTION > Series 6000 super-rapid fittings GENERAL DATA Fitting with connecting tube Sprint
> Series 6000 super-rapid fittings CATALOGUE > Release 8.8 Series 6000 super-rapid fittings for plastic tubes Sprint Tube external diameters: 3,, 5, 6, 8, 10, 12, 1, 16 mm Fittings threads: metric (M3,
Composite Push-In Fittings BSP/Metric Series 7000
2 Composite Push-In Fittings BSP/Metric Series 7000 NORTH AMERICAN FITTINGS & FLOW CONTROL VALVE CATALOG > Release 8.6 Tube Diameter OD: 4, 6, 8, 10, 12, 16 mm Thread Type: metric (M5, M7), BSP (G1/8,
connection solutions in stainless steel
connection solutions in stainless steel www.legris.com egris onnectic offers many solutions in stainless steel that are designed for excellent resistance to aggressive / corrosive environments and fluids.
Pneumatics CONTENT
Pneumatics CONTENT 2 3 4 5 6 7 8 9 Fittings 453 Flexible Tube 47 Quick Release Couplings 477 Actuators 485 Solenoid & Pneumatic Valves 495 Mechanical & Manual Valves 507 Automatic Valves 57 Filters, Regulators
Standard screw fittings Brass Art. No to
251.02 Reducing nipple, short type Art. No. Ident No. Male thread Female thread 290.940 108010 M14x1.5 M10x1.0 11.0 7.0 17 290.941 108011 M24x1.5 M16x1.5 24.0 16.0 27 251.00 111101 G 1/8 M5 11.0 7.0 14
4 PUSH-IN FITTINGS / BRASS PUSH-IN FITTINGS PLUS
PUSH-IN FITTINGS / BRASS PUSH-IN FITTINGS PLUS High performance fittings, easy to be used. Strong but also compact in order to ensure the maximum assembling flexibility. Silicon free materials. In compliance
Pneufit Push-in Tube Fittings Metric
Pneufit Push-in Tube ittings etric 4 14 mm O/ Very compact units asy insertion for rapid assembly of pneumatic circuits Positive anchorage ll P taper threads pre-coated with non-pt based sealant traight
EISELE IS QUALITY MADE IN GERMANY AVAILABLE ON STOCK IN GRAND RAPIDS, MI
2 Quality solutions - Made by EISELE EISELE IS QUALITY MADE IN GERMANY AVAILABLE ON STOCK IN GRAND RAPIDS, MI Over 30 patents, more than 8,000 standard articles, and 2,000 customized solutions impressively
ONE TOUCH FITTINGS Series WP2
ONE TOUCH FITTINGS - M5 1/ 1/ 3/ 1/2 Features Attractive design Compact size ed nipples of L, T & Y fittings enable plastic portion to turn by 30º Full area of the inner bore of the tubing is available
A Complete Range of Adaptors
A Complete Range of Adaptors Adaptors 0143 Page 9-7 0144 BSPT/ Page 9-7 0152 BSPT Page 9-7 0145 Page 9-7 0158 BSPT/ Page 9-7 0117 Page 9-8 0155 Page 9-8 0164 NPT/ Page 9-8 0167 BSPT/NPT Page 9-8 0168 Page
Brass Push-Type Fittings. Tube Thread. Part O.D. (M) NPT. No. in. in.
Brass Push-Type Fittings MALE ADAPTER SWIVEL MALE ELBOW 35.0 /8 0-3 35. /8 /6 35.4 /8 /8 35.6 5/3 0-3 35.8 5/3 /8 35.34 5/3 /4 35.40 3/6 0-3 35.4 3/6 /8 35.54 /4 0-3 35.56 /4 /8 35.58 /4 /4 35.6 /4 3/8
LF 3800/LF 3900 Push-In Fittings Range
LF 300/LF 3900 Push-In Fittings Range Stud Fittings Straights 305 3905 BSPT Page 1-79 305 Page 1-79 301 3901 BSPP/Metric Page 1-79 321 3921 BSPT Page 1-0 321 3921 Page 1-0 331 3931 BSPP/Metric Page 1-0
Quicklub Lubrication Systems Fittings, Adapters and Accessories
Divider Valve Mounting Accessories 24646 Valve mounting bracket 5304 4" nylon locknut for valve mounting 247023 Grade 8, 4" valve mounting bolt 239499 Template for divider valve mounting (6, 8, 0 and 2
Mur-lok. Mur-lok Polypropylene Quick-Connect Fittings & Valves. Check Valves. Fixed NPTF 90 Elbows. Check Valve Elbow. Swivel NPTF 90 Elbows
Polypropylene Quick-Connect Fittings & Valves Polypropylene Quick-Connect Fittings & Valves G.A. Murdock offers the largest selection of polypropylene quick-connect fittings and valves on the market. These
82400/ /2-way diaphragm valves
8400/840 /-way diaphragm valves > > Port size: DN 8... 50, G/4... (ISO G/NPT) > > High flow rate > > Damped operation > > Functional compact design > > Solenoid interchangeable without tools (c) Technical
05. YY XX. XX. series nominal size
Balflex MicroTest Check Line Hoses, Connectors & Gauges Balflex MicroTest is the range of hoses, couplings and gauges for check lines in hydraulic or refrigeration systems. Balflex MicroTest is produced
Hundreds of types of fittings
Push-to-Connect Hundreds of types of fittings can be used with plastic and rubber tubing and hose. Our goal at NewAge Industries is to offer a good cross-section of fittings to efficiently connect our
atalog /USA otes ontrol omponents 2 Parker Hannifin orporation ivision
Section 1 Parker Hannifin orporation ivision atalog 0802-2/USA otes ontrol omponents 2 Parker Hannifin orporation ivision atalog 0802-2/USA Index ontrol omponents Advantages, Assembly, Ordering Information...
Super-rapid fittings Series X6000 in Stainless Steel 316L
> Super-rapid fittings Series X6000 Super-rapid fittings Series X6000 in Stainless Steel 316L CATALOGUE > s 2012 Tube external diameters:, 6, 8, 10, 12 mm Fittings threads: BSP (G1/8, G1/, G3/8, G1/2),
Table of Contents. SeaTechInc.com
Table of Contents 1-2 Technical Information 3 Tubing for 35 Series 4-5 10 Series Fittings 6-11 35 Series Fittings and Valves 12 35 Series Quick Connect Manifold, Configuration Styles 13 35 Series Quick
Quicklub Lubrication Systems Fittings, Adapters and Accessories
Divider Valve Mounting Accessories 246416 Valve mounting bracket 51304 ¼" nylon locknut for valve mounting 247023 Grade 8, ¼" valve mounting bolt 239499 Template for divider valve mounting (6, 8, 10 and
in stainless steel 316L
> Super-rapid fittings Series X6000 Super-rapid fittings Series X6000 in stainless steel 316L Tube external diameters:, 6, 8, 10, 12 mm Fittings threads: BSP (G1/8, G1/, G3/8, G1/2), BSPT (R1/8, R1/, R3/8,
FITTING SELECTION GUIDE
This white paper will help you to determine which miniature (barbed, push-to-connect, or compression) fitting type is suitable for your specific application. At the beginning of a new project, engineers
Table of Contents. Page. See Catalog and Product Updates on our Website
2 Table of Contents Page Sapphire Orifice Assemblies... 3-5 Metal Orifice Assemblies - Barb Connections... 6-7 Metal Orifice Assemblies - NPT Connections... 8-9 Metal Orifice Assemblies - Inserts... 10-13
Brass Compression Fitting Range
Compression Fitting Range Fittings Stud Fittings 0105 BSPT Page 5-9 0105 NPT Page 5-9 0101 BSPP/Metric Page 5-10 0101..39 BSPP Page 5-10 0101 Metric Page 5-11 01 BSPP Page 5-11 0109 BSPT Page 5-12 0109
Brass Compression Fitting Range
Compression Fitting Range Fittings Stud Fittings 05 BSPT Page 5-9 05 NPT Page 5-9 01 BSPP/Metric Page 5-01..39 BSPP Page 5-01 Metric Page 5-11 0114 BSPP Page 5-11 09 BSPT Page 5-12 09 NPT Page 5-12 0199
Compression Fittings 36 Series Metric
6 Series 4 mm 28 mm O/ l l l l Wide range of types and sizes Rugged and durable Suitable for use under extreme conditions of pressure and temperature Ideal for most general industrial applications Technical
LIQUIfit Push-In Fittings with Metal Adaptors
LIQUIfit Push-In Fittings with Metal Adaptors The LIQUIfit range now benefits from a range extension of metal adaptors designed for liquid transfer applications. These fittings ensure reliable and compact
Speed Controller with One-touch Fitting
Speed Controller with One-touch Fitting Series Elbow Type Reduces labor time! Elbow Brass Stainless steel Electroless nickel plated Stainless steel 33 RoHS TMH y Easo t e us Push-lock type Larger handle
Compression Fittings. Brass Compression Fittings. Stainless Steel Compression Fittings. PL Nickel-Plated Brass Spigot Fittings
Compression Fittings Compression Fittings Stainless Steel Compression Fittings PL Nickel-Plated Spigot Fittings Compression Fittings Compression Fittings Compression Fittings (P. 5-5) Stainless Steel Compression
Gaskets. Fluid Handling Components. Bee Valve offers a full line of original and replacement gaskets to meet all your needs.
2009 Fluid Handling Components Gaskets Bee Valve offers a full line of original and replacement gaskets to meet all your needs. Bolted Tank Fitting Bulkhead Fitting Manifold System Cam Coupler Tank Lid
MINIMATIC FITTINGS. Push-Quick Fittings. Quick Connect Fittings. Clippard Instrument Laboratory, Inc. (513)
MINIMATIC FITTINGS Clippard Instrument Laboratory, Inc. (513) 521-4261 www.clippard.com Push-Quick Fittings 325-329 Slip-On Fittings 330-335 Brass Fittings 336-347 Quick Connect Fittings 348-353 Fittings
Tubing and Accessories
Section 7 Tubing and Accessories Inch Industrial Tubing...............................FIT-7-2 Metric Industrial Tubing.............................FIT-7-3 Inch D.O.T. Tubing.................................FIT-7-3
82 Series Fittings Table of Contents
Table of Contents ase Part Number with Description Table of Contents (page 1 of 1)... Page Number 30182 Male NPTF Pipe - Rigid Straight... -234 31382 Male NPTF Pipe - Swivel - Straight... -235 30282 Female
Speed Controller with One-touch Fitting AS13 1F-M3 AS13 1F-M5. Specifications
Speed Controller with One-touch Fitting Series Minimizes installation time and cost Reduces the mounting height and enables compact machinery design. Effective area is larger than the former model. Tube
Low-Pressure Transportation and Hydraulic Hose and Fittings the right solution for special applications and requirements
Low-Pressure Transportation and Hydraulic and Fittings the right solution for special applications and requirements A wide range of different hose types rubber is available, with textile-braide fire-retardant
Pneumatic and Electronic Motion Control Distributor AIROYAL COMPANY airoyalcompany.net Ph: Fax:
COMPANY Pneumatic and Electronic Motion Control Distributor AIROYAL COMPANY airoyalcompany.net Ph: 973-761-4150 Fax: 973-761-5731 Quick Valves Disconnect Table of Contents Index Table of Contents Ball
Fittings threads: metric (M5), BSP (G1/8, G1/4, G3/8, G1/2, G3/4, G1), BSPT (R1/8, R1/4, R3/8, R1/2, R3/4, R1)
> Series 2000 pipe fittings Series 2000 pipe fittings Fittings threads: metric (M5), BSP (G1/8, G1/, G3/8, G1/2, G3/, G1), BSPT (R1/8, R1/, R3/8, R1/2, R3/, R1) The wide range of Camozzi pipe fittings,
Speed Controller with Indicator
Speed Controller with Indicator The numerical indication of flow rate knob rotations reduces flow setting time and setting errors! Elbow Universal Brass Electroless nickel plated RoHS Stainless steel 1
Group 16. Fittings Brass - Galvanized, AISI Pneumatics
Group 16 Fittings Brass - Galvanized, AISI 316 - Pneumatics 16 INDEX Page Contents 2 Index 3-4 Low pressure AISI 316, Brass and Galvanized Malleable Iron ransitions and Nipples 5-6 Brass Fittings Series
Easy to assemble Available with long or short nut in wide range of styles and sizes 651 MALE ELBOW 5/16 O.D. TUBE 1/8 PIPE MALE CONNECTOR
A29-1 TM CIC 200 BRASS COMPRESSION TUBE FITTINGS ASSORTMENT P/N 7745 Medium pressure air, oil, water and natural gas applications Manufactured from high density brass alloy No flaring or soldering required
Vacuum Cups. Styles. Cup material Nitrile Silicon Urethane Material code NBR SI U Operating temperature ( C) -60 to ±5 55 ±5 55 ±5
atalog PN1000-2US Vacuum ups P ellows Vacuum ups These s are for curved, corrugated, lightly textured surfaces and flexible product. Under vacuum, the bellow will collapse on contact and lift the product
VISIT OUR DISTRIBUTION & OPERATIONS CENTER
PUSH IN FITTINGS P V. P. W, P. V. W,, V,. T V I I, USA. W 75% ', V. I, V 300 USA P, M S D, C A, A M, F. T, V P. VISIT OUR DISTRIBUTION & OPERATIONS CENTER Vacuforce LLC 933 Western Drive Indianapolis IN
Code Desc /8. Tecnical Features. Inlet diameter with reductions 1/2-3/8
Filter - regulator - lubricator Three in one tool which combines in a single body for the air filter, regulator and lubricator outlet pressure in line for pneumatic tools. Necessary where there is any
BASICLINE PROGRAM. Standard components for pneumatics. pilot operated check valve. Messing. throttle with click function.
BASICLINE PROGRAM Standard components for pneumatics pilot operated check valve Messing throttle with click function rotary connector 2 Quality solutions - Made by EISELE EISELE IS QUALITY MADE IN GERMANY
Main Block Series. Concentrated Branching Joint for Assembly. Assembling Manifold Blocks for Concentrated Branching
http://www.pisco.co.jp FITTING CONTROLLER VALVE TUE MAKE-TO-ORDER PRODUCTS Concentrated ranching Joint for Assembly Main lock 310 Assembling Manifold locks for Concentrated ranching Same Flow Rate with
PRODUCT DIRECTORY OUR GENIUS IS FITTINGS. Issue 1. Nickel Plated Brass BSP Fittings. Compression Fittings
Issue 1 PRODUCT DIRECTORY Compression Fittings Sistem-P Push-in Fittings Compact Push-in Fittings Nickel Plated Brass BSP Fittings Air Valves Silencers Tubing OUR GENIUS IS FITTINGS www.wadefittings.com
stainless steel compression fittings
compression fittings principle of compression fittings egris has used its long experience of brass compression fittings to develop a range of compression fittings. These fittings are resistant to aggressive
37 flare couplings to ISO
Applications Widely used throughout the world, 37 flare couplings are designed for most medium pressure mobile and stationary applications. These couplings are characterized by easy, compact assembly and
INSTRUMENTATION METERING VALVES. VMT Series.
INSTRUMENTATION METERING VALVES VMT Series www.unilok.com Features Pressure rating up to VMTS series - 2000psig (137bar) VMTL & VMTM series - 1000psig (69bar) Temperature rating from -23 C(-10 F) to 204
Lubrication Installation Components, Accessories & Fittings Table of Contents
Lubrication Installation Components, Accessories & Fittings Table of Contents Lubrication Fittings & Accessories: Introduction............................................. 2 Threaded Fittings........................................
INOX PrOgram made by eisele
EISELE INOXline Program Stainless steel connection solutions Quality solutions Made by EISELE INOX 2 Quality solutions - Made by EISELE EISELE IS QUALITY MADE IN GERMANY Over 30 patents, more than 5.000
Quicklub Lubrication Systems
Fittings, Adapters and Accessories Divider Valve Mounting Accessories 246416 Valve mounting bracket 51304 ¼" nylon locknut for valve mounting 247023 Grade 8, ¼" valve mounting bolt 239499 Template for
:,Rhino SD/XD G/D 24 Vdc ISO
:,Rhino SD/XDG/D Vdc ISO ()Rhino SD/XD() SD/XD Rhino SD/XDG/D Vdc ISO Rhino SD/XD, Rhino SD/Xd, (Rhino SD/XD) 006 Nordson Corporation P/N 75606A-0 Rhino SD/XDG/D Vdc ISO 0 9 5 8 7 6 P/N 75606A-0 006 Nordson
Fluidizing Pickup Tube Kits
Instruction Sheet P/N 303787-02 Introduction The fluidizing pickup tube kit retrofits your existing mobile powder system with fluidizing air. It injects fluidizing air at the pickup tube inlet with minimal
PIPING. Aluminium pipe for inert gases (5,7 m / 18,7 ft) PAGE 2/ AIRNET Ø (MM / INCH) PARTNUMBER LOT SIZE / ¾" 05
PIPING Aluminium pipe for inert gases (5,7 m / 18,7 ft) 2811 1061 05 20 / ¾" 05 2811 2061 05 25 / 1" 05 PAGE 2/99 2014-11-24 Aluminium pipe for air (2,85 m / 9,4 ft) PIPING 2811 1063 10 20 / ¾" 10 2811
BRASS FITTINGS (R410a) BRASS FITTINGS
(R410a) R410a Short Barrel Flare Nuts 5010404410A 1/4 $4.21 5010808410A 1/2 $8.52 5010504410A 5/16fl x 1/4 tube $5.73 5011010410A 5/8 $13.50 5010606410A 3/8 $7.08 5011212410A 3/4 $20.54 BRASS FITTINGS
COUPLING CATALOGUE. Push-In, Standard, Conventional, Accessories
COUPLING CATALOGUE Push-In, Standard, Conventional, Accessories Coupling Catalogue Table of Content Push-in and Composite Building Block... 4 Standard Connectors... 12 Quick Connection Systems P5.... 16
Messing. screw-in connectors
Messing screw-in connectors 2 Quality solutions - Made by EISELE EISELE IS QUALITY MADE IN GERMANY Over 30 patents, more than 8,000 standard articles, and 2,000 customized solutions impressively underline
legris products are available from: Maryland Metrics
legris products are available from: Maryland Metrics 2003 2005 New Products atalog web: mdmetric.com email: sales@mdmetric.com push-to-connect fittgs 9000 safety coupler mi ball valves staless steel range
pneumatic function fittings
Parker Legris connectic products are available from MARYLAND METRIS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 email: sales@mdmetric.com web:
Series 900 Minifolds. Aluminium Air Distribution Manifolds. Manifolds & Minifolds. Technical Specifications. hnl-uk.com. Series 900 Minifolds
Series 900 Minifolds Aluminium Air Distribution Manifolds Replace complex assemblies of valves and fittings with anodised aluminium MINIFOLDS., OR 20 OUTLETS COMPREHENSIVE RANGE ALSO AVAILABLE IN 36 STAINLESS
smart irrigation solutions
smart irrigation solutions ENKi FastFit Manifold The ENKi FastFit Manifold is a strong, versatile and easy-to-use system for irrigation installations. A large range of fittings allows for numerous configurations
Transair. Specification Submittal
Specification Submittal About Parker: Transair is part of the Parker Hannifin Corporation (NYSE: PH), which was founded in 1918. With annual sales exceeding $13 billion, Parker Hannifin is the world s
Stainless Steel components
Stainless Steel components Stainless steel cylinders ISO 6432 Stainless steel cylinders ISO 12 Stainless steel piston rod accessories Stainless steel mounting accessories for cylinders ISO 6432 from page.1.1
Function Fittings. Flow Control Regulators. Piloted Function Fittings. Non-Return Valves. LIQUIfit Pressure Fittings. Other Function Fittings
Flow Control Regulators Piloted Non-Return Valves LIQUIfit Pressure Fittings Other Silencers Flow Control Regulators (P. 4-6) Blocking Fittings (P. 4-36) Piloted Non-Return Valves (P. 4-38) Function:
Fittings and Accessories. For oil and grease. For Centralized Lubrication Systems and General Use
Fittings and Accessories For oil and grease. For Centralized ubrication Systems and General Use Fittings and Accessories This brochure provides an overview of metallic pipe unions for luid engineering.
Ferulok Flareless Bite Type Fittings
Flareless Bite Type Fittings Flareless SAE 080101 / Flareless Flareless SAE 080601 / Flareless Flareless SAE 080102 / NPTF Flareless SAE 080120 / SAE-ORB Flareless SAE 080103 / NPTF Flareless SAE 080221
Beverage Master Parts List. Part 8 of 13: Fittings. Issued: March 9, Toll Free:
Beverage Master Parts List Issued: March 9, 2012 Part 8 of 13: Fittings Our most popular fittings are shown in this section, but many other fittings are available. If you don t find what you are looking
Innovative Design Maximum Capability
Optimum Performance Innovative Design Maximum Capability www.liquifit.net 7205 East Hampton Avenue Mesa Arizona 85209-3301 Introducing From the Trusted Inventor of the Push-to-Connect Fitting With over
Minimal Fitting Series
http://www.pisco.co.jp FITTING CONTROLLER VALVE TUE MAKE-TO-ORDER PRODUCTS Ultra-Small arb Fitting for Pneumatic Piping Fitting 266 Suitable for Vacuum Piping by a Combination with Vacuum Tube Suitable
Speed Controller with One-touch Fitting
Speed Controller with One-touch Fitting S Series Push-lock Type Reduces labor time! Easy to use Easy to lock Unlock Push-lock type Lock Improved tube insertion/removal Max. Insertion force: 30% (8 N) reduction
Centro-Matic Automated Lubrication Systems Grease Injectors
SL-33 For dispensing petroleum-based lubricants with a viscosity up to NLGI No. 2 (refer to Design Guide). May be combined in a circuit of Injectors SL-32, SL-V, SL-V XL, SL-1 and/or SL-11. Available in
Lincoln installation components, accessories and lubrication fittings
Lincoln installation components, accessories and lubrication fittings People, capabilities and systems to save money and increase productivity Industry leader Continually satisfying our customers with
Valves, Fittings, and Manifolds Catalog. We make things MOVE
Valves, Fittings, and Manifolds Catalog We make things MOVE We Make Things Move A forward-thinking innovator, Bimba provides industry-leading pneumatic, hydraulic and electric motion solutions that are
LIQUIfit Push-In Fittings
LIQUIfit Push-In Fittings This "eco-designed" range proposes an innovative alternative for water applications; no fluid contamination occurs and environmental protection is guaranteed. These fittings ensure
TL960 PARTS MANUAL. Fuel Section. Page 9-1. Fuel 09/97
Fuel Section Fuel Page 9-1 Fuel Tank Between The Rails Page 9-2 Fuel Fuel Tank Between The Rail Item Part Num. Number Qty. Description Notes 1 61360662 1 Elbow, 90 o, 1/2" NPT x 5/8" T 2 61270100 1 Sender
Speed Controller with Indicator
Speed Controller with Indicator Numerical indication of handle rotation for flow rate reduces flow setting time and setting errors! Indicator window Body size Body size or larger Indicator window Number
Catalog Hydraulic Couplings High Pressure
High Pressure 3 Series Threaded Actuation Design Threaded Sleeve The 3 Series coupling are designed for high pressure applications. The coupler sleeve and nipple body must be manually threaded together
Edition 1
RAYPEX 800-628-5044 Edition 1 RELATIVE ORDER OF RESISTANCE TO GAS PENETRATION Impurity levels after six hours of flushing with helium 4.5 (100 1/h) Moisture (H20) Oxygen (O2) 1. Stainless Steel 1-2 ppm
83 series Brass compression fittings Ø 1/ nominal pipe size, NPT thread
83 series rass compression fittings Ø /8..., NPT thread For use in areas of vibration Pre-assembled units No special assembly tools or heat required an be remade without damage to tube Suitable for use
Tube Fitting Stainless SUS316 Compression Fitting Series
http://www.pisco.co.jp FITTING CONTROLLER VALVE TUBE MAKE-TO-ORDER PRODUCTS Compression Fitting of Corrosion Resistant Steel Tube Fitting SUS316 Compression Fitting 120 Chemical Industry Medical Industry
SUMMARY STAINLESS STEEL FITTINGS FITTINGS P PUSH-IN FITTINGS, STAINLESS STEEL D3.2 P STANDARD FITTINGS SERIES XA D3.8 P QUICK FITTINGS SERIES XC D3.
SUMMARY STAINLESS STEEL D3 P PUSH-IN, STAINLESS STEEL D3.2 P STANDARD SERIES XA D3.8 P QUICK SERIES XC D3.11 SUMMARY STAINLESS STEEL D3.1 PUSH-IN, STAINLESS STEEL The push-in fittings in the XR can be
Miniature Proportional Valves Precision Fluidics
Precision Fluidics 2 Electronic Pressure Control When you partner with the global leader in motion and control technologies, expect to move your business and the world forward. From miniature solenoid
Control Valve Specifications
Control Valve Specifications Available in two-way, three-way and four-way configuration and with port sizes from 10-32UNF through to 1/2"NPT. The N2V & N3V1 offering is a direct acting solenoid poppet
Miniature Fittings Series M
Miniature Fittings Series M pplicable Tubing: Ø 3.2, Ø 4, Ø 6 onnection Thread:, M, arb onfiguration for easy insertion into the tube Holds the tube tightly ody With electroless nickel plated Low tightening
CATALOG. USMetrixQC is a Quick Connect Manifold system for warm and cold running water, and central heating systems. USMetrix QC
CATALOG USMetrixQC is a Quick Connect Manifold system for warm and cold running water, and central heating systems. Connector Body O-Ring Collet (Patent Pending Design) EASY AND QUICK INSTALATION Connector
Speed Controller with Uni One-touch Fitting Push-lock type. New-stand male threads for piping that reduces the screw-in time by 1/3. Model.
Speed Controller with Uni One-touch Fitting Push-lock type Series Elbow Universal Brass New-stand male threads for piping that reduces the screw-in time by 1/3. Gasket Female thread Rc, G NP, NPF Shape
VACUUM HOSES AND VALVES
VACUUM HOSES AND VALVES RANGE Name Description Max. use T C SK2VV232-1 Standard vacuum hose 232 C SK2VV232-2 Standard vacuum hose assemblies 232 C SK2VV232-3 QRC socket connector 232 C SK2VV232-4 QRC plug