for plastic tubes CONNECTION > Series 6000 super-rapid fittings GENERAL DATA Fitting with connecting tube Sprint
|
|
|
- Susanna Gilbert
- 5 years ago
- Views:
Transcription
1 > Series 6000 super-rapid fittings CATALOGUE > Release 8.8 Series 6000 super-rapid fittings for plastic tubes Sprint Tube external diameters: 3,, 5, 6, 8, 10, 12, 1, 16 mm Fittings threads: metric (M3, M5, M6, M7), BSP (G1/8, G1/, G3/8, G1/2, G3/), BSPT (R1/8, R1/, R3/8, R1/2) Series 6000 super-rapid fittings have been designed with a special collet which provides an homogeneous tight on the whole surface of plastic tubes, thus ensuring high reliability and a long service life, also after connections and disconnections of the tube are repeated several times. The wide range of these fittings includes many types of threads: metric, BSP and BSPT. Sprint models are characterized by great reliability of female threads, both BSP and BSPT, with non-flat surfaces. This is possible thanks to a Teflon ring on the male thread, which guarantees a perfect seal between the two threads.»» The Stop Fitting model is available with a self-retaining device which interrupts the air flow when the tube is disconnected and restores it when reconnected. GENERAL DATA Fitting with connecting tube Diameters Threads Temperature Tube to connect Fluid Materials Pressure ø mm Micro models: ø mm GAS conical ISO 7 (BSPT) GAS cylindrical ISO 228 (BSP); M5-M6 and other metric threads available on request; NPT on request Micro models: M3 - M5 - M7 - G1/8 - G1/ -20 C 80 C (see the technical data of tubing used) Micro models: -10 C 80 C (see the technical data of tubing used) Rilsan, PA , Polyethylene, PU, Hytrel Polyester compressed air (for other types of fluid, contact our engineers) standard models: body and collet in nickel-plated brass, O-Ring in NBR, thread seals in PTFE - NBR - PA models with self-retaining device: body and collet in nickel-plated brass, poppet valve in brass, spring in stainless steel, O-Ring in NBR, thread seals in PTFE standard models: min -0,9 bar - max 16 bar (see tubing) models with self-retaining device: 0 16 bar /
2 CATALOGUE > Release 8.8 > Series 6000 super-rapid fittings Fittings Mod. S6510 Male Connector Sprint Mod. A D C F G H L SW SW1 Weight (g) S6510-1/8 G1/ S6510-1/ G1/ S /8 5 G1/ S / 5 G1/ S /8 6 G1/ S / 6 G1/ S /8 6 G3/ S /8 8 G1/ S / 8 G1/ S /8 8 G3/ S /2 8 G1/ S / 10 G1/ S /8 10 G3/ S /2 10 G1/ S / 12 G1/ S /8 12 G3/8 9,3 18,3 20,5 8 28, S /2 12 G1/2 5,8 18,3 2, S /8 1 G3/8 10,3 20,5 2,5 8 30, S /2 1 G1/2 6,3 20,5 2,5 9 26, S /2 16 G1/2 9 23,5 26, S / 16 G3/ 3,5 23,5 27,3 9 26,5 2-6 Fittings Mod. S LF New Male Connector Sprint with self-retaining device Mod. A D F G H L SW weight (g) S6510-1/8-LF G1/ S /8-LF 6 G1/ /
3 > Series 6000 super-rapid fittings CATALOGUE > Release 8.8 Fittings Mod Micro Metric-BSP Male Connector Mod. A D F H L SW1 Weight (g) M3 3 M M5 3 M M7-M M /8-M G1/ , Y M7-M 6 M /8-M 6 G1/ , Y /8-M 8 G1/ , Y /-M 10 G1/ = with gasket = with O-Ring Fittings Mod New model Metric-BSP Male Connector Mod. A D C F G H L SW SW1 Weight (g) M5 M M6 M /8 G1/ / G1/ M5 5 M M5 6 M M6 6 M /8 6 G1/ / 6 G1/ /8 8 G1/ / 8 G1/ /8 8 G3/ / 10 G1/ /8 10 G3/ / 12 G1/ /8 12 G3/ /
4 CATALOGUE > Release 8.8 > Series 6000 super-rapid fittings Fittings Mod. 663 Metric-BSP Female Connector Mod. A D C F G L P (min) SW Weight (g) 663 -M5 M /8 G1/ /8 5 G1/ /8 6 G1/ / 6 G1/ /8 8 G1/ / 8 G1/ / 10 G1/ Fittings Mod. S6520 Swivel Male Elbow Sprint Mod. A D C E F H M SW SW1 Weight (g) S6520-1/8 G1/ S6520-1/ G1/ S /8 5 G1/ S / 5 G1/ S /8 6 G1/ S / 6 G1/ S /8 6 G3/ S /8 8 G1/ S / 8 G1/ S /8 8 G3/ S /2 8 G1/ S / 10 G1/ S /8 10 G3/ S /2 10 G1/ , S / 12 G1/ S /8 12 G3/8 7, ,5 8 26, S /2 12 G1/2 7,3 20,5 19,5 9 26, S /8 1 G3/8 8, ,5 8 28, S /2 1 G1/2 8,3 21,5 21,5 9 28, /1.05.0
5 > Series 6000 super-rapid fittings CATALOGUE > Release 8.8 Fittings Mod Micro Metric Swivel Male Elbow Mod. A D E H M SW SW1 Weight (g) M3 3 M M5 3 M = with gasket = with O-Ring Fittings Mod Metric-BSP Swivel Male Elbow Mod. A D C E F H M SW SW1 Weight (g) M5 M /8 G1/ / G1/ M5 5 M M5 6 M /8 6 G1/ / 6 G1/ /8 8 G1/ / 8 G1/ /8 8 G3/ / 10 G1/ /8 10 G3/ / 12 G1/ /8 12 G3/ /
6 CATALOGUE > Release 8.8 > Series 6000 super-rapid fittings Fittings Mod. S6500 Metric Fix Male Elbow Mod. A D C E F H M SW Weight (g) S6500-1/8 R1/ S6500-1/ R1/ S /8 5 R1/ S / 5 R1/ S /8 6 R1/ S / 6 R1/ S /8 8 R1/ S / 8 R1/ S /8 8 R3/ S / 10 R1/ S /8 10 R3/ S / 12 R1/ S /8 12 R3/ Fittings Mod Long Swivel Male Elbow Sprint Mod. A D C E F H M SW SW1 Weight (g) /8 6 G1/ / 6 G1/ /8 8 G1/ / 8 G1/ /
7 > Series 6000 super-rapid fittings CATALOGUE > Release 8.8 Fittings Mod Micro Complete Metric Adjustable Single Banjo Mod. A B C F H L S W SW Weight (g) M3 3 M M5 3 M Fitting Mod M5 Metric Fix Male Elbow Mod. A D C E F H M SW Weight (g) M5 M /
8 CATALOGUE > Release 8.8 > Series 6000 super-rapid fittings Fittings Mod. S630 Swivel Male Tee Sprint Mod. A D C E F H L SW SW1 Weight (g) S630-1/8 G1/ S /8 5 G1/ S / 5 G1/ S /8 6 G1/ S / 6 G1/ S /8 8 G1/ S / 8 G1/ S /8 8 G3/ S / 10 G1/ S /8 10 G3/ S /2 10 G1/ S / 12 G1/ S /8 12 G3/ S /2 12 G1/ S /2 1 G1/ Fittings Mod. 632 Micro Metric Swivel Male Tee Mod. A D E H L SW SW1 Weight (g) M3 3 M M5 3 M = with gasket = with O-Ring /
9 > Series 6000 super-rapid fittings CATALOGUE > Release 8.8 Fittings Mod. 632 Metric-BSP Swivel Male Tee Mod. A D C E F H L SW SW1 Weight (g)) 632 -M5 M /8 G1/ M5 5 M /8 6 G1/ / 6 G1/ /8 8 G1/ / 8 G1/ /8 8 G3/ / 10 G1/ /8 10 G3/ / 12 G1/ /8 12 G3/ Fittings Mod. S60 Lateral Swivel Male Tee Sprint Mod. A D C E F H L M SW SW1 Weight (g) S60-1/8 G1/ S60 5-1/8 5 G1/ S60 6-1/8 6 G1/ S60 6-1/ 6 G1/ S60 8-1/8 8 G1/ S60 8-1/ 8 G1/ S60 8-3/8 8 G3/ S / 10 G1/ S /8 10 G3/ S /8 12 G3/ S60 1-1/2 1 G1/ /
10 CATALOGUE > Release 8.8 > Series 6000 super-rapid fittings Fittings Mod. 62 Micro Lateral Metric Swivel Male Tee Mod. A D E H L M SW SW1 Weight (g) 62 3-M3 3 M M5 3 M = with gasket = with O-Ring Fittings Mod. 62 Lateral Metric-BSP Swivel Male Tee Mod. A D C E F H L M SW SW1 Weight (g) 62 -M5 M /8 G1/ M5 5 M /8 6 G1/ / 6 G1/ /8 8 G1/ / 8 G1/ /8 8 G3/ / 10 G1/ /8 10 G3/ / 12 G1/ /8 12 G3/ /
11 > Series 6000 super-rapid fittings CATALOGUE > Release 8.8 Fittings Mod. 652 Micro Metric Swivel Male Y Mod. A D F H L M SW SW1 Weight (g) M3 3 M M5 3 M = with gasket = with O-Ring Fittings Mod S650 Mod. 651: Metric Adjustable Male Y Mod. S650: Swivel Male Y Sprint Mod. A D F H L M SW Weight (g) 651 -M5 M M5 6 M S650-1/8 G1/ S /8 6 G1/ S /8 8 G1/ S / 8 G1/ Fittings Mod Complete BSP Swivel Single Banjo * Complete Metric Swivel Single Banjo * = not swivel Model with gasket Mod. A B C E F H L M SW W Weight (g) Notes M5 M Ø 8 10 * /8 G1/ Ø /8 6 G1/ Ø / 6 G1/ Ø /8 8 G1/ Ø / 8 G1/ Ø / 10 G1/ Ø 18 2 /
12 CATALOGUE > Release 8.8 > Series 6000 super-rapid fittings Fittings Mod Complete BSP Swivel Double Banjo Mod. A B C E F H L M W SW Weight (g) /8 G1/ Ø /8 6 G1/ Ø / 6 G1/ Ø /8 8 G1/ Ø / 8 G1/ Ø / 10 G1/ Ø Fittings Mod Double Banjo Mod. A C F L O V W Weight (g) assembled with Mod M SCU, SVU, SCO / Ø , 1635, SCU, SVU, SCO / Ø , 1635, SCU, SVU, SCO / Ø , 1635, SCU, SVU, SCO / Ø , 1635, SCU, SVU, SCO / Ø , 1635, SCU, SVU, SCO... Fittings Mod with gaskets = Single Banjo Stem = Double Banjo Stem = Triple Banjo Stem Mod Drawings and dimensions on page / /
13 > Series 6000 super-rapid fittings CATALOGUE > Release 8.8 Fittings Mod Single Banjo Mod. A C F M O V W Weight (g) assembled with Mod M M SCU, SVU, SCO / Ø , 1635, SCU, SVU, SCO M M SCU, SVU, SCO / Ø , 1635, SCU, SVU, SCO M Ø M Ø SCU, SVU, SCO / Ø , 1635, SCU, SVU, SCO / Ø , 1635, SCU, SVU, SCO / Ø , 1635, SCU, SVU, SCO / Ø , 1635, SCU, SVU, SCO / Ø , 1635, SCU, SVU, SCO / Ø , SCU, SVU, SCO / Ø , SCU, SVU, SCO / ,8 16,5 32 1,5 21 Ø Fittings Mod Metric Male Adaptor Sprint Mod. G D H T L SW Weight (g) M5 M * /8 G1/ /8 5 G1/ / 5 G1/ /8 6 G1/ / 6 G1/ /8 8 G1/ / 8 G1/ / 10 G1/ /8 10 G3/ /8 12 G3/ /2 1 G1/ / * = with O-Ring
14 CATALOGUE > Release 8.8 > Series 6000 super-rapid fittings Fittings Mod. S Male Elbow Sprint Mod. A D E F H L M SW SW1 Weight (g) S /8 6 G1/ S / 6 G1/ S /8 8 G1/ S / 8 G1/ S /8 8 G3/ S / 10 G1/ S /8 10 G3/ S /2 10 G1/ S / 12 G1/ S /8 12 G3/ S /2 12 G1/ Fittings Mod Micro Bulkhead Connector Mod. A B F L MAX T Weight (g) M7x /1.05.1
15 > Series 6000 super-rapid fittings CATALOGUE > Release 8.8 Fittings Mod Bulkhead Connector Mod. A B F L N MAX SW SW1 T Weight (g) 6590 M10x M12x M1x M16x M18x M20x M22x Fittings Mod Micro Union Connector Mod. A G L S Weight (g) Fittings Mod Union Connector New model Mod. A F G L N S S1 S2 Weight (g) /
16 CATALOGUE > Release 8.8 > Series 6000 super-rapid fittings Fittings Mod Reducer Reducer Union Connector Mod. A B F G L M N Weight (g) Fittings Mod BSP Female Bulkhead Mod. A D E F G H L K (max) K (min) SW SW1 Weight (g) /8 6 G1/8 10 M12x / 6 G1/ 11.5 M12x /8 8 G1/8 10 M15x / 8 G1/ 11.5 M15x /8 10 G3/ M18x Fittings Mod Micro Elbow connector Mod. A M SW Weight (g) /
17 > Series 6000 super-rapid fittings CATALOGUE > Release 8.8 Fittings Mod Elbow connector Mod. A C F M SW Weight (g) Fittings Mod. 650 Micro Tee Connector Mod. A L M SW Weight (g) Fittings Mod. 650 Tee Connector Mod. A C F L M SW Weight (g) /
18 CATALOGUE > Release 8.8 > Series 6000 super-rapid fittings Fittings Mod Cross Junction Mod. A F L M SW Weight (g) Fittings Mod Micro Y Union Mod. A F L M SW Weight (g) Fittings Mod Y Union Mod. A C F L M Weight (g) /
19 > Series 6000 super-rapid fittings CATALOGUE > Release 8.8 Fittings Mod Cartridge S* = for both metallic and synthetic seat Mod. A B C D DE F G H H2 (+0,1/0) J K L P min (Kg) P max (Kg) S (+0,01/-0,0) Weight (g) x x x x x x Fittings Mod Female Plug Mod. A G L Weight (g) Fittings Mod Enlarger Junction Mod. A G C F L T Weight (g) /
20 CATALOGUE > Release 8.8 > Series 6000 super-rapid fittings Fitting Mod Micro Reducer Junction Mod. A F G L T Weight (g) Fittings Mod Reducer Junction Mod. A G C F L T Weight (g) /
21 > Series 6000 super-rapid fittings CATALOGUE > Release 8.8 Fittings Mod Junction Mod. G L Weight (g) Fittings Mod Junction Elbow Mod. A G C L F T M SW Weight (g) Fittings Mod Protection caps Colour: Black Self-extinguishing material, class V0 Mod. A F L Weight (g) /
22 CATALOGUE > Release 8.8 > Series 6000 super-rapid fittings Accessory Mod Micro Plastic Male Plug Mod. G L P T Weight (g) Accessory Mod Plastic Male Plug Mod. G L P T Weight (g) Accessory Mod. SP Disconnecting tube set The set includes keys to disconnect tubes with diameters between and 12 mm. Mod. SP /
Rapid push-in fittings for plastic tubes Series 1000
CATALOGUE > Release 8.5 > Rapid fittings Series 1000 Rapid push-in fittings for plastic tubes Series 1000 Tube external diameters: 5/3, 6/, 8/6, 10/8, 12/10, 15/12,5 mm Fittings threads: metric (M5, M6,
Super-rapid fittings Series X6000 in Stainless Steel 316L
> Super-rapid fittings Series X6000 Super-rapid fittings Series X6000 in Stainless Steel 316L CATALOGUE > s 2012 Tube external diameters:, 6, 8, 10, 12 mm Fittings threads: BSP (G1/8, G1/, G3/8, G1/2),
Fittings threads: metric (M5), BSP (G1/8, G1/4, G3/8, G1/2, G3/4, G1), BSPT (R1/8, R1/4, R3/8, R1/2, R3/4, R1)
> Series 2000 pipe fittings Series 2000 pipe fittings Fittings threads: metric (M5), BSP (G1/8, G1/, G3/8, G1/2, G3/, G1), BSPT (R1/8, R1/, R3/8, R1/2, R3/, R1) The wide range of Camozzi pipe fittings,
in stainless steel 316L
> Super-rapid fittings Series X6000 Super-rapid fittings Series X6000 in stainless steel 316L Tube external diameters:, 6, 8, 10, 12 mm Fittings threads: BSP (G1/8, G1/, G3/8, G1/2), BSPT (R1/8, R1/, R3/8,
Pneumatics CONTENT
Pneumatics CONTENT 2 3 4 5 6 7 8 9 Fittings 453 Flexible Tube 47 Quick Release Couplings 477 Actuators 485 Solenoid & Pneumatic Valves 495 Mechanical & Manual Valves 507 Automatic Valves 57 Filters, Regulators
Composite Push-In Fittings BSP/Metric Series 7000
2 Composite Push-In Fittings BSP/Metric Series 7000 NORTH AMERICAN FITTINGS & FLOW CONTROL VALVE CATALOG > Release 8.6 Tube Diameter OD: 4, 6, 8, 10, 12, 16 mm Thread Type: metric (M5, M7), BSP (G1/8,
Male stud fittings. Male stud elbow. Fluid... Working pressure... Vacuum level... Rated temperature...
FITTINGS Push - in fittings 431 Series Fluid... Working pressure... Vacuum level... Rated temperature... Torque... Standards... Materials... Compressed air Max. 20 bar (290 psi) 55 mm Hg vacuum (99 %)
EISELE IS QUALITY MADE IN GERMANY AVAILABLE ON STOCK IN GRAND RAPIDS, MI
2 Quality solutions - Made by EISELE EISELE IS QUALITY MADE IN GERMANY AVAILABLE ON STOCK IN GRAND RAPIDS, MI Over 30 patents, more than 8,000 standard articles, and 2,000 customized solutions impressively
Pipe fittings and tubing T, MPL, PNZ
Catalogue 2001 Pipe fittings and tubing T, MPL, PNZ Tube od ø4/2, 5/3, 6/4, 8/6, 10/8, 12/10, 14/12, 15/12,5 Connections M5, G1/8, G1/4, G3/8, G1/2 R1/8, R1/4, R3/8, R1/2, R3/4 7 When involved in factory
Fittings Metal Push-To- Connect Fittings. We make things MOVE
Fittings Metal Push-To- Connect Fittings We make things MOVE Contents 3 Fittings 4 Product Features 4 Push-In Fittings 4 Features and Benefits 5 How it Works 5 Materials of Construction 5 Fluid 5 Operating
Quick-release couplings Series 5000
CATALOGUE > Release 8. > Quick-release couplings Series 5000 Quick-release couplings Series 5000 Nominal diameter ø 5 and 7 mm - Plastic tubes 6/, 8/6, 10/8 Rubber hoses 6x1, 8x17, 10x19, 13x23 Connections
FIT-2. Inch. Ø Â" to Ë" O/D tube
For simple and quick assembly of pneumatic circuits. Positive tube connection. Wide range of types available. Reliable and corrosion resistant. Specifications Fluid: Compressed air, nitrogen, inert and
LF 3600 Push-In Fittings Range
LF 300 Push-In Fittings Range Stud Fittings Straights 375 BSPT Page 1-97 301 BSPP/Metric Page 1-97 31 Metric Page 1-97 31 BSPP/Metric Page 1-9 321 BSPT Page 1-9 331 BSPP/Metric Page 1-9 300 Page 1-9 Push-In
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD USA web:
Push-In Fittings LF 3000 LF 3200: 3 mm LIQUIfit LF 300 LF 300/ LF 3900 LF 0 PARKER LEGRIS Industrial Connector Systems Products are available from: MARYLAND METRICS P.O. Box 21 Owings Mills, MD 21117 USA
BASICLINE PROGRAM. Standard components for pneumatics. pilot operated check valve. Messing. throttle with click function.
BASICLINE PROGRAM Standard components for pneumatics pilot operated check valve Messing throttle with click function rotary connector 2 Quality solutions - Made by EISELE EISELE IS QUALITY MADE IN GERMANY
LF 3600 Push-In Fittings
LF 300 In order to meet your technical and environment requirements, Parker Legris designed this range of metal fittings, offering robustness, reliability and resistance to industrial fluids for the most
37 flare couplings to ISO
Applications Widely used throughout the world, 37 flare couplings are designed for most medium pressure mobile and stationary applications. These couplings are characterized by easy, compact assembly and
connection solutions in stainless steel
connection solutions in stainless steel www.legris.com egris onnectic offers many solutions in stainless steel that are designed for excellent resistance to aggressive / corrosive environments and fluids.
INOX PrOgram made by eisele
EISELE INOXline Program Stainless steel connection solutions Quality solutions Made by EISELE INOX 2 Quality solutions - Made by EISELE EISELE IS QUALITY MADE IN GERMANY Over 30 patents, more than 5.000
Code Desc /8. Tecnical Features. Inlet diameter with reductions 1/2-3/8
Filter - regulator - lubricator Three in one tool which combines in a single body for the air filter, regulator and lubricator outlet pressure in line for pneumatic tools. Necessary where there is any
Standard screw fittings Brass Art. No to
251.02 Reducing nipple, short type Art. No. Ident No. Male thread Female thread 290.940 108010 M14x1.5 M10x1.0 11.0 7.0 17 290.941 108011 M24x1.5 M16x1.5 24.0 16.0 27 251.00 111101 G 1/8 M5 11.0 7.0 14
Brass Push-Type Fittings. Tube Thread. Part O.D. (M) NPT. No. in. in.
Brass Push-Type Fittings MALE ADAPTER SWIVEL MALE ELBOW 35.0 /8 0-3 35. /8 /6 35.4 /8 /8 35.6 5/3 0-3 35.8 5/3 /8 35.34 5/3 /4 35.40 3/6 0-3 35.4 3/6 /8 35.54 /4 0-3 35.56 /4 /8 35.58 /4 /4 35.6 /4 3/8
COUPLING CATALOGUE. Push-In, Standard, Conventional, Accessories
COUPLING CATALOGUE Push-In, Standard, Conventional, Accessories Coupling Catalogue Table of Content Push-in and Composite Building Block... 4 Standard Connectors... 12 Quick Connection Systems P5.... 16
Function Fittings. Flow Control Regulators. Piloted Function Fittings. Non-Return Valves. LIQUIfit Pressure Fittings. Other Function Fittings
Flow Control Regulators Piloted Non-Return Valves LIQUIfit Pressure Fittings Other Silencers Flow Control Regulators (P. 4-6) Blocking Fittings (P. 4-36) Piloted Non-Return Valves (P. 4-38) Function:
Messing. screw-in connectors
Messing screw-in connectors 2 Quality solutions - Made by EISELE EISELE IS QUALITY MADE IN GERMANY Over 30 patents, more than 8,000 standard articles, and 2,000 customized solutions impressively underline
A Complete Range of Adaptors
A Complete Range of Adaptors Adaptors 0143 Page 9-7 0144 BSPT/ Page 9-7 0152 BSPT Page 9-7 0145 Page 9-7 0158 BSPT/ Page 9-7 0117 Page 9-8 0155 Page 9-8 0164 NPT/ Page 9-8 0167 BSPT/NPT Page 9-8 0168 Page
SCREW HOSE COUPLINGS SCREW HOSE COUPLINGS B.1. STANDARD. LMC s screw hose couplings with a smooth hose shank comply with EN / DIN 2817.
SCREW HOSE COUPLINGS B.1. STANDARD LMC s screw hose couplings with a smooth hose shank comply with EN 14420-5 / DIN 2817. OPERATION Screw hose couplings are used to connect hoses with male or female BSP,
LIQUIDLINE PROGRAM. Connections for cooling water. dezincification-resistant brass. Messing. aluminium.
LIQUIDLINE PROGRAM Connections for cooling water dezincification-resistant brass Messing aluminium stainless steel 2 Quality solutions - Made by EISELE EISELE IS QUALITY MADE IN GERMANY Over 30 patents,
LF 3800/LF 3900 Push-In Fittings Range
LF 300/LF 3900 Push-In Fittings Range Stud Fittings Straights 305 3905 BSPT Page 1-79 305 Page 1-79 301 3901 BSPP/Metric Page 1-79 321 3921 BSPT Page 1-0 321 3921 Page 1-0 331 3931 BSPP/Metric Page 1-0
3 Composite Right Angle Flow Control Valves NPTF/Inch Series TMCU, TMVU, TMCO
Flow Control Valves NPTF NORTH AMERICAN FITTINGS & FLOW CONTROL VALVE CATALOG > Release 8.6 Composite Right Angle Flow Control Valves NPTF/Inch Series TMCU, TMVU, TMCO Swivel Design: Meter-Out, Meter-In
4 PUSH-IN FITTINGS / BRASS PUSH-IN FITTINGS PLUS
PUSH-IN FITTINGS / BRASS PUSH-IN FITTINGS PLUS High performance fittings, easy to be used. Strong but also compact in order to ensure the maximum assembling flexibility. Silicon free materials. In compliance
BRASS FITTINGS (R410a) BRASS FITTINGS
(R410a) R410a Short Barrel Flare Nuts 5010404410A 1/4 $4.21 5010808410A 1/2 $8.52 5010504410A 5/16fl x 1/4 tube $5.73 5011010410A 5/8 $13.50 5010606410A 3/8 $7.08 5011212410A 3/4 $20.54 BRASS FITTINGS
SUMMARY STAINLESS STEEL FITTINGS FITTINGS P PUSH-IN FITTINGS, STAINLESS STEEL D3.2 P STANDARD FITTINGS SERIES XA D3.8 P QUICK FITTINGS SERIES XC D3.
SUMMARY STAINLESS STEEL D3 P PUSH-IN, STAINLESS STEEL D3.2 P STANDARD SERIES XA D3.8 P QUICK SERIES XC D3.11 SUMMARY STAINLESS STEEL D3.1 PUSH-IN, STAINLESS STEEL The push-in fittings in the XR can be
EISELE LIQUIDLINE PROGRAM CONNECTIONS FOR COOLING WATER
PROGRAM CONNECTIONS FOR COOLING WATER QUALITY SOLUTIONS MADE BY EISELE LIQUID 2 Quality solutions - Made by EISELE EISELE IS QUALITY MADE IN GERMANY Over 30 patents, more than 3,500 standard articles,
Group 16. Fittings Brass - Galvanized, AISI Pneumatics
Group 16 Fittings Brass - Galvanized, AISI 316 - Pneumatics 16 INDEX Page Contents 2 Index 3-4 Low pressure AISI 316, Brass and Galvanized Malleable Iron ransitions and Nipples 5-6 Brass Fittings Series
FITTINGS, CONTROLS AND ACCESSORIES
, CONTROLS AND ACCESSORIES Regardless of your application, Norgren has fittings and accessories to complete your pneumatic package. Norgren has an extensive lineup of Pneufit push-in fittings in metric
ONE TOUCH FITTINGS Series WP2
ONE TOUCH FITTINGS - M5 1/ 1/ 3/ 1/2 Features Attractive design Compact size ed nipples of L, T & Y fittings enable plastic portion to turn by 30º Full area of the inner bore of the tubing is available
2/2-way, 3/2-way NC and NO. Monostable - bistable (with magnetic memory) Ports M5 and G1/8 - cartridge ø4
CATALOGUE > Release 8.5 > Directly operated solenoid valves Series A Directly operated solenoid valves Series A /-way, 3/-way NC and NO. Monostable - bistable (with magnetic memory) Ports M5 and G1/8 -
Energy Measurement Solutions Aluminium Piping Solutions Pneumatic and Pure Water Push In Fittings High Pressure Push In Piping Solutions Pneumatic Components Fittings for Fluids & Gases www.pneumsysenergy.com
Plug-in connections M3... M7, G 1/8... G 3/4
Plug-in connections M3... M7, G 1/8... G 3/4 Nickel-plated brass, Stainless steel, Plastic, POM Straight threaded plug-in connections Basic fittings, short Basic fittings, long Schott-plug-in connections
Hundreds of types of fittings
Push-to-Connect Hundreds of types of fittings can be used with plastic and rubber tubing and hose. Our goal at NewAge Industries is to offer a good cross-section of fittings to efficiently connect our
Connectors Content. Connectors at a glance Screw connectors and plug-in connectors - Standard
Connectors Content Connectors at a glance... 264 Screw connectors and plug-in connectors - Standard... 266 Screw connectors and plug-in connectors - self-extinguishing... 276 Screw connectors and plug-in
Quicklub Lubrication Systems Fittings, Adapters and Accessories
Divider Valve Mounting Accessories 246416 Valve mounting bracket 51304 ¼" nylon locknut for valve mounting 247023 Grade 8, ¼" valve mounting bolt 239499 Template for divider valve mounting (6, 8, 10 and
VISIT OUR DISTRIBUTION & OPERATIONS CENTER
PUSH IN FITTINGS P V. P. W, P. V. W,, V,. T V I I, USA. W 75% ', V. I, V 300 USA P, M S D, C A, A M, F. T, V P. VISIT OUR DISTRIBUTION & OPERATIONS CENTER Vacuforce LLC 933 Western Drive Indianapolis IN
Quicklub Lubrication Systems Fittings, Adapters and Accessories
Divider Valve Mounting Accessories 24646 Valve mounting bracket 5304 4" nylon locknut for valve mounting 247023 Grade 8, 4" valve mounting bolt 239499 Template for divider valve mounting (6, 8, 0 and 2
Single and double-acting, cushioned, magnetic. ø 32, 40, 50, 63 mm
> Series 97 stainless steel cylinders CATALOGUE > Release 8.7 Series 97 stainless steel cylinders Single and double-acting, cushioned, magnetic. ø 32, 40, 50, 63 mm»» Clean design»» Stainless steel AISI
stainless steel compression fittings
compression fittings principle of compression fittings egris has used its long experience of brass compression fittings to develop a range of compression fittings. These fittings are resistant to aggressive
Lubrication Systems. Section 26
Lubrication Systems Section 26 26-1 INFORMATION - SYSTEMS The Lincoln QuickLub is an automated and centralised lubrication system that can improve productivity and extend the service life of your plant.
funnels, measures, gravity cocks, jerry cans and oil suction pumps...
funnels, measures, gravity cocks, jerry cans and oil suction pumps lubrication AND ACCESSORIES grease nipples............................................................ GREASE CONNECTORS........................................................
FLOW CONTROL VALVES & ACCESSORIES
TECHNICAL SPECIFICATIONS construction Valve group Materials Mounting Ports Position Operating temperature PNEUMATIC DATA Operating pressure Nominal pressure nominal flow needle-type Meter In, Meter Out,
Cable Glands & Accessories
Cable Glands & Accessories This catalog features ITC s extensive range of liquid-tight, strain relief cord connectors (cable glands) and accessories, including locknuts, sealing washers, plugs, etc. These
Hyva Hoses & Adapters Introduction
Introduction Hyva Hoses Hoses offered by HYVA comply with the highest safety standards for truck hydraulics. Working pressures range from 225 to 350 bar. Code system hydraulic hoses Hose 1 H.P. 16-2000
Fittings and Accessories. For oil and grease. For Centralized Lubrication Systems and General Use
Fittings and Accessories For oil and grease. For Centralized ubrication Systems and General Use Fittings and Accessories This brochure provides an overview of metallic pipe unions for luid engineering.
05. YY XX. XX. series nominal size
Balflex MicroTest Check Line Hoses, Connectors & Gauges Balflex MicroTest is the range of hoses, couplings and gauges for check lines in hydraulic or refrigeration systems. Balflex MicroTest is produced
MARCH Polyethylene Piping Systems.
MARCH 2017 Polyethylene Piping Systems www.plasson.com.au GLOBAL PRESENCE LOCAL COMMITMENT Get an expert on your team. Plasson has the widest range of compression, electrofusion, threaded and transitional
patented standards SAFETY QUICK COUPLINGS EXPERTISE AT THE SERVICE OF SAFETY AND PERFORMANCE General Catalogue a n d ot h e r p e n di n g
SAFETY QUICK COUPLINGS EXPERTISE AT THE SERVICE OF SAFETY AND PERFORMANCE PREVO S1 couplings represent the latest generation of pneumatic connection mechanisms. They provide a fully safe response to the
HOSE, TUBE & CONNECTION FITTINGS CATALOGUE. JSG Industrial Systems quality industry solutions. Fire Suppression Systems. Flow Measurement Systems
HOSE, TUBE & CONNECTION FITTINGS CATALOGUE JSG Industrial quality industry solutions Lubrication Management Material Dispensing Management Hose & Cable Management Diesel & Fluid Management Fire Suppression
Composite Right Angle Flow Control Valves BSP/Metric Series PSCU, PMCU, PSVU, PMVU, PSCO, PMCO
Flow Control Valves BSP NORTH AMERICAN FITTINGS & FLOW CONTROL VALVE CATALOG > Release 8.6 Composite Right Angle Flow Control Valves BSP/Metric Series PSCU, PMCU, PSVU, PMVU, PSCO, PMCO Non-Swivel Design:
Brass Compression Fitting Range
Compression Fitting Range Fittings Stud Fittings 0105 BSPT Page 5-9 0105 NPT Page 5-9 0101 BSPP/Metric Page 5-10 0101..39 BSPP Page 5-10 0101 Metric Page 5-11 01 BSPP Page 5-11 0109 BSPT Page 5-12 0109
Local solutions for individual customers worldwide PNEUMATIC PIPEWORK COMPONENTS AND ACCESSORIES STAUFF UK. Super Air Service!
Local solutions for individual customers worldwide STAUFF UK PNEUMATIC PIPEWORK COMPONENTS AND ACCESSORIES www.stauff.co.uk PNEUMATIC PIPEWORK COMPONENTS AND ACCESSORIES Tube Connectors In Line Flow Control
LOC-LINE the original modular coolant hose system
endless solutions, flexibility & performance COOLANT CONTROL LOC-LINE the original modular coolant hose system 8 1 9 8 6 13 4 The combinations and flexibility offered by Loc-Line shows that whatever your
Raccordi gasolio forati 1 via. Connections eye no beat. Bicones brass joints. Fittings for braking and diesel systems
Raccordi gasolio forati 1 via Tipo di materiale: acciaio Filettatura metrica Code Desc. d x L x pace 1450000100 6x15x1 1450000195 8x16x1 1450000200 8x16x1,25 1450000210 10x23x1 1450000212 10x18x1,25 1450000214
Compression Fittings. Brass Compression Fittings. Stainless Steel Compression Fittings. PL Nickel-Plated Brass Spigot Fittings
Compression Fittings Compression Fittings Stainless Steel Compression Fittings PL Nickel-Plated Spigot Fittings Compression Fittings Compression Fittings Compression Fittings (P. 5-5) Stainless Steel Compression
pneumatic function fittings
Parker Legris connectic products are available from MARYLAND METRIS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 email: sales@mdmetric.com web:
Ø5 (Ø.20) S12,65 x 1,5. M16 x 1,5 * 2 Special thread: buttress thread S12,65 x 1,5. Max. Working Pressure: 400 bar / 5801 PSI Burst Pressure:
Test Hoses SMS / SS + Working Pressure up to 630 bar / 9135 PSI Technical Data for Test Hose A B (Stard Version) C D Nominal Bore () (mm) Max. Working Pressure (PN) (bar / PSI) 00 / 5801 630 / 9135 30
Pneufit Inch Series Push-In Tube Fittings 1/8" to 1/2" Tube Sizes UNF to 1/2" NPT Thread Options
Section 1 Pneufit Inch Series Push-In Tube Fittings to 1/2" Tube Sizes 10-32 UNF to 1/2" NPT Thread Options Inch Series Product Numbering System..................FIT-1-2 Inch Series Shapes and odes.........................fit-1-3
nickel-plated brass - PBT technopolymer HNBR, FKM stainless steel
CATALOGUE > Release 8.8 > Series A solenoid valves Series A directly operated solenoid valves /-way - Normally Closed (NC) and Normally Open (NO) 3/-way - Normally Closed (NC) and Normally Open (NO)»»
SERIES: VLS. INTERCHANGE: With similar couplings MAIN APPLICATIONS. Mobile construction equipment Drilling rigs Vehicle/Trailer Industrial plant
INTERCHANGE: With similar couplings MAIN APPLICATIONS Mobile construction equipment Drilling rigs Vehicle/Trailer Industrial plant VLS series is the screw to connect coupling with poppet style valving,
Magnetic Sizes mm
CATALOGUE > Release 8.7 > Series CGB guided parallel grippers Series CGB guided parallel grippers Running out of stock Magnetic Sizes 6-20 - 25-32 mm»» Guided mechanism which allows high repeatability»»
Tubes and stiffener sleeves Use of stiffener sleeves
Tubes and stiffener sleeves Use of stiffener sleeves very thick wall thickness not recommended thicker wall thickness decreasing pressure resistance increasing wall thickness ideal wall thickness no stiffener
Function Fittings. Flow Control Regulators. Piloted Function Fittings. Non-Return Valves. Pressure Fittings. Other Function Fittings.
Function Fittings Flow Control Regulators Piloted Function Fittings Non-Return Valves Pressure Fittings Other Function Fittings Silencers Function Fittings 4-3 Function Fittings Flow Control Regulators
Specialty Fluid Fittings
Buyers guide Specialty Fluid Fittings for lubrication systems FEATURING Couplings & s Adapters Compression fittings Check valves Meter and control units bijur.com B r6-06 Buyer's guide to specialty fluid
KOMATSU 30 Flare (Metric Threads)
KOMATSU 30 Flare (Metric Threads) KOMATSU (JIS 30 Flare Metric Thread) Connections / Identification JIS 30 Flare connections include series of inch (BSP) threads and metric threads. This section is dedicated
MINIVALVES, MECHANICALLY AND HAND OPERATED SERIES VME
MINIVALVES, MECHANICALLY AND HAND OPERATED SERIES VME Minivalves with / NO NC poppet, Installation in any position Push-in fittings for pipe Ø 4 mm and on the valve body Low actuation force Rapid, accurate
nickel-plated brass - PBT technopolymer HNBR, FKM stainless steel
CATALOGUE > Release 8.7 > Series A solenoid valves Series A directly operated solenoid valves /-way, 3/-way NC and NO. Monostable - bistable (with magnetic memory) Ports M5 - G1/8 - R1/8 - cartridge ø4
COUPLINGS, VALVES AND TUBING DELTA FLUID PRODUCTS LIMITED
Wade COUPLINGS, VALVES AND TUBING DELTA FLUID PRODUCTS LIMITED DELTA FLUID PRODUCTS LTD Delta Fluid Products have been associated with the manufacturing of Valves and Fittings for Fluid and Gases for over
THOMAFLUID - Handbook IV
Reichelt Chemietechnik GmbH + Co. - Handbook IV lndustrial Connectors of Metal Tubing Squeeze Connections of Metal for Pneumatics Quick-Disconnect Couplings of Plastics and Metal Cocks and Valves of Plastics
?????? Part No Part No. 20SF 30SF 40SF 20SM 30SM 40SM 20SH 30SH 40SH. Part No.
Jamec Pem 310 Series Couplers Single button operation. Will pass approximately 30cfm at 100psi. Jamec Pem 330 Series Adaptors?????? 13.0980 13.0985 13.0990 13.0950 13.0965 13.0970 13.0975 13.0930 13.0935
Ferulok Flareless Bite Type Fittings
Flareless Bite Type Fittings Flareless SAE 080101 / Flareless Flareless SAE 080601 / Flareless Flareless SAE 080102 / NPTF Flareless SAE 080120 / SAE-ORB Flareless SAE 080103 / NPTF Flareless SAE 080221
ACCESSORIES & FITTINGS 800 SERIES CONTROL VALVES
ACCESSORIES & FITTINGS 800 SERIES CONTROL VALVES 8 VALVE FITTING PART NUMBERS 2" & 3" PRESSURE REDUCING VALVES* 10645 8970-002 (9526-006) 1/4" tube (9526-006) Flow 8970-001 (9526-001) 8970-010 (9526-010)
Stainless Steel components
Stainless Steel components Stainless steel cylinders ISO 6432 Stainless steel cylinders ISO 12 Stainless steel piston rod accessories Stainless steel mounting accessories for cylinders ISO 6432 from page.1.1
Valve Built-in self-seal mechanism. Air does not exhaust after removal of tubing. Stopper Cushion. Release button(blue) Guide Collet Chuck
O-ring O-ring Retainer Spring One-touch fitting (built-in self-seal mechanism) to prevent air exhaust when removing tube. Best for multiple use areas when pressure cannot be shut down. types are available.
Thermoplastic Hoses. Polyflex/Parflex. Polyflex Presto
Thermoplastic Hoses Motors Valves Actuators Accumulators Filtration Polyflex/Parflex Thermoplastic Hoses for Hydraulic Applications Polyflex Presto Tubing for Pneumatics For pressures up to 700 bar. Single
Brass Compression Fitting Range
Compression Fitting Range Fittings Stud Fittings 05 BSPT Page 5-9 05 NPT Page 5-9 01 BSPP/Metric Page 5-01..39 BSPP Page 5-01 Metric Page 5-11 0114 BSPP Page 5-11 09 BSPT Page 5-12 09 NPT Page 5-12 0199
83 series Brass compression fittings Ø 1/ nominal pipe size, NPT thread
83 series rass compression fittings Ø /8..., NPT thread For use in areas of vibration Pre-assembled units No special assembly tools or heat required an be remade without damage to tube Suitable for use
PRODUCE EVOLUTION. Be careful, our valves Ref.789 are changing
PRODUCE EVOLUTION Be careful, our valves Ref.789 are changing We currently have 2 different types available (according to DN) with different dimensions Marking old type : Marking new Type : At the end,
ARB AIR LOCKER Air Operated Locking Differentials
170102 Bulkhead Fitting Kit, 5mm to 3/16 Specs: 02 1 OUTER COMPRESSION NUT (5mm) 170602 Internal Tube Size 3/16 05 1 CNTRL COMPRESSION NUT (5mm to 3/16 ) 170604 07 1 FERRULE (3/16 ) 170606 3 08 1 INNER
DN 3/8" Male, free nut BSP 0 C + 90 C Max Pressure : 10 Bars Specifications : For flush tank
ISO 9001-2008 Size : Ends : Min Temperature : Max Temperature : DN 3/8" Male, free nut BSP 0 C + 90 C Max Pressure : 10 Bars Specifications : For flush tank Materials : Brass Page 1 sur 10 SPECIFICATIONS
LIQUIfit Push-In Fittings with Metal Adaptors
LIQUIfit Push-In Fittings with Metal Adaptors The LIQUIfit range now benefits from a range extension of metal adaptors designed for liquid transfer applications. These fittings ensure reliable and compact
SWING JOINT & HEAVY TURF
PRICE GROUP DESCRIPTION 11 SWING JOINT 08 HEAVY TURF DISCOUNT MULTIPLIER PRODUCTS SWING JOINT & HEAVY TURF IRRIGATION FITTINGS INCLUDES: PVC SWING JOINTS AND IRRIGATION ACCESSORIES LSJHT EFFECTIVE JULY
Linea - Line. raccordi a compressione compression fittings
5300 Linea - Line raccordi a compressione compression fittings Raccordi a compressione/ Compression fittings SYSTEM FIELDS OF APPLICATION Mainly used in distribution systems for drinking water, sanitary
Seal: NBR. Silicone-free. Regulations. DI: 2002/95/EC (RoHS) RG: 1907/2006 (REACH) DI: 97/23/EC (PED)
Non-Return Valves Non-return valves allow compressed air to flow in one direction and prevent it from flowing in the other. Fitted upstream of the circuit to be protected, they provide total protection.
Couplings, hose clamps and pneumatics
Cejn 310... 79 Cejn 320... 79 Cein 331... 80 Cejn 421... 80 Cejn 223... 81 Cejn 341... 81 Cejn 410... 82 Cejn 550... 82 Cejn 342... 83 Cejn 347... 83 Cejn 220... 84 Cejn 171 (Acetylen)... 84 Cejn 172 (LPG)...
T-Bar Bonnet. Monoflanges STANDARD OPTIONS. O.S.&Y. Bonnet (firesafe) Gas Solution Bonnet. Anti-Tamper Bonnet
T-Bar Bonnet Gas Solution bonnet with non-rotating Metal Stem Tip The Gas Solution bonnet protects the internal and external threads. Moreover, the bonnet thread is less subject to wear, since it is not
Digital Catalog. Operation can be made from the toolbar at the center of the lower portion of the screen.
Digital Catalog Click here to display the contents. Click here to download the PDF file. Operation can be made from the toolbar at the center of the lower portion of the screen. O-ring O-ring Retainer
quality industry solutions
quality industry solutions JSG Industrial Systems HOSE, TUBE & CONNECTION FITTINGS CATALOGUE 2017 JSG INDUSTRIAL SYSTEMS Since its inception in 1968, JSG Industrial Systems has been a proud supplier of
SOLENOID VALVES AND PNEUMATIC VALVES
S E R I E S P Directly operated mini-solenoid valves Series P 3/ way N.C. or N.O. Ports M5 (for single base) Cartridge ø 3 and 4 (for manifold) Note: All the serie P electrovalves are basic in DC. For
Pneufit C composite and Pneufit M fittings Inch Ø 1/8... 1/2 O/D tube
Pneufit composite and Pneufit M fittings Ø 1/8... 1/2 O/D tube Norgren Pneufit fittings are ready to use, offering fast assembly with no need for tools providing optimum flow. Pneufit offers a broad range
Double acting, cushioned, magnetic Ø mm
CATALOGUE > Release 8.7 > Series 40 cylinders Series 40 cylinders Double acting, cushioned, magnetic 60-200 - 250-320 mm In compliance with ISO 5552 standards and with the previous DIN/ISO 643 - VDMA 24562
TECHNICAL CATALOGUE BALL VALVES: IDEAL
TECHNICAL CATALOGUE BALL VALVES: TEC ITAP SpA, founded in Lumezzane (Brescia) in 1972, is currently one of the leading production companies in Italy of valves, fittings and distribution manifolds for