Brass Compression Fitting Range
|
|
|
- Adrian Gilbert
- 6 years ago
- Views:
Transcription
1 Compression Fitting Range Fittings Stud Fittings 05 BSPT Page NPT Page BSPP/Metric Page BSPP Page 5-01 Metric Page BSPP Page BSPT Page NPT Page BSPP Page BSPT Page 5-13 Tube-to-Tube Fittings 03 BSPT Page BSPP Page BSPP Page BSPP Page BSPP Page 5- Compression Fittings 0 Page Page Page Page Page Page Page 5-17 Complementary Fittings 01 Page Page Page Page Page Page Page Page 5-22 Compression Fittings Self-Fastening Hose Barb Connectors 0132 Page Page Page 5-25 Accessories 0122 Page Page Page Page Page Page Page Page Page Page Page Page
2 Compression Fittings These "universal" fittings provide users with numerous connection options for a wide variety of tube materials without the need for tube threading or soldering. This range guarantees excellent long-term sealing and performance. Product Advantages Simple to Install and Use Suitable for pneumatic and medium pressure hydraulic applications Compatible with many industrial fluids arge product range: 22 configurations Excellent sealing due to the tightening of the olive onto the tube Metallic sealing guarantees maximum service life High strength brass for increased mechanical reliability Wide Variety of Tubing Connection of different types of tubing and hose: metal, polymer, steel, rubber, etc. Multiple tube diameters can be connected using the Parker egris reducer assembly system No insert required for rigid and semi-rigid polyamide tubing below 14 mm Pneumatics Cooling Automotive Process ubrication Fluid Transmission Packaging Industrial Machinery Applications Technical Characteristics Compatible Fluids Water, machining oil, fuel, hydraulic oil, compressed air, chemical fluids, disinfectants Component Materials Tube: polymer Working Pressure Vacuum to 550 bar Tube: steel Olive: (steel) Nut: (polymer) Working Temperature -0 C to +250 C without sealing washer, with metal tubing Nut: (steel) Olive: 0124 (brass) Reducer: 01 (brass) Tightening Torque See "Technical Characteristics" on opposite page Barb connector Working temperature: -20 C to +0 C, with sealing washer and polyamide tubing. Reliable performance is dependent upon the type of fluid conveyed, component materials and tubing being used. Guaranteed for use with a vacuum of 755 mm Hg (99% vacuum). Thread sealing must be guaranteed by user. Nut: 01 (brass) Fitting body: brass Tube: polymer Maximum Bore Diameters The table below shows the recommended compatibility of tube size, BSPP male thread and maximum bore. Tube O.D. BSPP Thread Max. Bore 4-5- G1/ G1/ G3/ G1/ G3/ G1 24 Tube ength for Assembly Minimum length of tube () between 2 fi ttings. ød (mm) mini (mm) (mm) Regulations CNOMO: E N (for robotic equipment in the automotive industry) DI: 97/23/EC (PED) RG: 1907/200 (REACH) DI: 2002/95/EC (RoHS) DI: 94/9/EC (ATEX) 5-
3 Technical Characteristics Installing Compression Fittings Cutting the Tube Preparing the Connection Connecting the Tube Final Assembly Cut the polymer or metal tube square. For metal tubing, de-burr the tube prior to connection. Tube bending should be done before connection. Push the tube up against the shoulder of the body of the fitting and hand tighten. Tighten the nut using a spanner or torque wrench to enable the olive to bite on the tube, the connection being completed when the recommended tightening torque is reached (see tables below). Compression Fittings Slide the nut onto the tube; lubricate the threads on the body and nut along with the olive to facilitate tightening (for metal tubing as well). Fit the olive onto the end of the tube. It is recommended to use an insert in order to prevent tube creeping (diameter > 14mm) Recommended Nut Tightening Torque Tightening torque in dan.m = maximum tightening torque of a 01 nut and 0124 olive with copper, brass or steel tube. C C Nut 01 and Nut F F Ø D (mm) F 01 F Max. dan.m Copper or F Max. dan.m Steel Compression Fittings Customised Fittings Working directly with its customers and based on its knowledge and experience, Parker egris can design customised brass compression fittings for specific requirements using the customer's specifications. The range of compression fittings also offers nickel chemical surface treatment in order to improve the corrosion resistance and chemical compatibility of the fittings (the model number of the fitting is then given the suffix 99). The above recommendations are given in good faith. However, since each application is different, it is advisable to undertake tests in actual working conditions. 5-7
4 Technical Characteristics The use of Parker egris brass compression fittings is dependant on the tube material. Tables of recommended working pressure for the different tubes are shown below. Recommended Tube Type Copper tube: copper which has been "cold rolled", cold drawn and in straight lengths. tube: in cold-rolled straight lengths (same working pressure as for copper tube). "Coiled annealed" copper tube: reduces working pressure by 35%; must be avoided completely if vibration is present. Steel tube: "thin wall" cold drawn, seamless, bright annealed and in straight lengths. mm to 1 mm O.D.: max. wall thickness 1 mm Above 1 mm O.D.: max. wall thickness 1.5 mm Polyamide tube: semi-rigid For rigid polyamide tube, multiply the figures in this table by 1.8. Recommended Tube-Fitting Assembly Configurations Assembled using Parker egris brass olive and nut. Assembled using Parker egris steel olive and nut (nut type ). Assembled using Parker egris brass olive and nut. Copper Tube Maximum Working Pressure (bar) Steel Tube Maximum Working Pressure (bar) Parker egris Semi-Rigid Polyamide Tube Maximum Working Pressure (bar) x 4 3 x 5 4 x x 8 8 x x x x 14 x 1 1 x. x x x x 22.8 x x x 25 2 x x x x 4 3 x 5 4 x x 8 8 x x x x 14 x 1 1 x x x x Maximum Working Pressure (bar) Working Pressure with Water Hammer (bar) Maximum Water Hammer Pressure (bar) 3 x x 4 2 x x 5 4 x x 8 8 x 7.5 x x 12 9 x x x 14.4 x x 11 x 13 x 1 12 x 1 14 x x 20 1 x x x x When using a plastic nut type , the maximum working pressure is bar, for all diameters. Working Pressure Coefficients for Semi-Rigid Polyamide Tubing Temperature C -40 C / - C - C / +30 C +30 C / +50 C +50 C /+70 C +70 C /+0 C Factor Parker egris brass compression fittings are not compatible with ammonia and its derivatives. The above recommendations are given in good faith. However, since each application is different, it is advisable to undertake tests in actual working conditions. 5-8
5 Compression Fittings 05 Stud Fitting, Male BSPT Thread C F F1 H max H1 Kg 4 R1/ R1/ R1/ R1/ R1/ R3/ R1/ R1/ R3/ R1/ R1/ R3/ R1/ R1/ R3/ R1/ R1/ R3/ R1/ R3/ R3/ R1/ R1/ R3/ R1/ R3/ R1/ R3/ R1/ R3/ R1/ R3/ R R3/ R R3/ R Compression Fittings Compression Fittings Metric taper threads or NPT threads are available by special order, subject to minimum quantities. 05 Stud Fitting, Male NPT Thread C F F1 H max H1 Kg NPT1/ NPT1/ NPT1/ NPT1/ NPT1/ NPT3/ NPT1/ Related Products Parker also offers another type of brass compression fi tting: Metrulok, with a one-piece olive/nut. Do not hesitate to contact us. 5-9
6 Compression Fittings 01, technical polymer Stud Fitting with Captive Sealing Washer, Male BSPP and Metric Thread C E F F1 H max H1 Kg 4 M5x G1/ G1/ G1/ G1/ G1/ G1/ G3/ G1/ G3/ G1/ G3/ G1/ G3/ G1/ G3/ G1/ G3/ G1/ G1/ G3/ G3/ G3/ G G3/ G G With pre-assembled polyamide washer Sealing washers 002 can be found in chapter , zinc-plated steel with NBR seal Stud Fitting, with Bi-Material Seal, Male BSPP Thread C E F F1 H max H1 Kg 4 G1/ G1/ G1/ G1/ G1/ G1/ G3/ G1/ G3/ G1/ G3/ G1/ G3/ G1/ G3/ G1/ G3/ G1/ G1/ G3/ G3/ G3/ G G G Thread with bi-material seal Bi-material sealing washers, part number 0139, can be found in Chapter 9 5-
7 Compression Fittings 01 Stud Fitting, Male Metric Thread C E F F1 H max H1 Kg 4 M7x M8x M8x Mx Mx Mx M12x M12x M13x M14x M14x M1x M1x Mx M1x M1x Mx Mx M20x Mx M20x M22x M22x M24x Compression Fittings 0114 Stud Fitting, Female BSPP Thread C E F F1 H max H1 Kg 4 G1/ G1/ G1/ G1/ G1/ G1/ G3/ G1/ G1/ G3/ G1/ G3/ G1/ G1/ G3/ G1/ G1/ G3/ G1/ G3/ G1/ G1/ G3/ G1/ G3/ G1/ G3/ G3/ G1/ G3/ G3/ G3/ Compression Fittings 5-11
8 Compression Fittings 09 Stud Elbow, Male BSPT Thread C F H J max 1 Kg 4 R1/ R1/ R1/ R1/ R1/ R1/ R1/ R1/ R3/ R1/ R3/ R1/ R1/ R3/ R1/ R3/ R1/ R3/ R1/ R3/ R1/ R3/ R1/ R3/ R1/ R3/ R3/ R R3/ R R3/ R Metric taper threads or NPT threads are available by special order, subject to minimum quantities. 09 Stud Elbow, Male NPT Thread C F H J max 1 Kg NPT1/ NPT1/ NPT1/ NPT1/ NPT1/ , NBR Stud Orientable Elbow, Male BSPP Thread C F F1 H H1 H1 max J max 1 Kg 4 G1/ G1/ G1/ G1/ G1/ G1/ G3/ G1/ G3/ G1/ G3/ G1/ G1/ G3/ G3/ G G The body will orientate for positioning purposes. 5-12
9 Compression Fittings 08 Stud Branch Tee, Male BSPT Thread C F H J 1 /2 Kg 4 R1/ R1/ R1/ R1/ R1/ R1/ R3/ R1/ R3/ R1/ R3/ R3/ R1/ R3/ R1/ R3/ R1/ R1/ R3/ R3/ R3/ R Compression Fittings Metric taper threads or NPT threads are available by special order, subject to minimum quantities. 03 Stud Run Tee, Male BSPT Thread C F H max H1 H2 J Kg 4 R1/ R1/ R1/ R1/ R1/ R1/ R3/ R1/ R3/ R1/ R3/ R3/ R1/ R3/ R1/ R3/ R1/ R1/ R3/ R3/ R3/ Metric taper threads or NPT threads are available by special order, subject to minimum quantities. Compression Fittings Related Products Parker also offers another type of brass compression fi tting: Metrulok, with a one-piece olive/nut. Do not hesitate to contact us. 5-13
10 Compression Fittings 01, technical polymer Single Banjo with Captive Sealing Washer, Male BSPP Thread C F F1 H H1 max 1 N Kg 4 G1/ G1/ G1/ G1/ G1/ G1/ G1/ G3/ G1/ G3/ G1/ G3/ G1/ G3/ G1/ G3/ G1/ G1/ G1/ G3/ G3/ Thread with pre-assembled washer Sealing washers 002 can be found in chapter , zinc-plated steel with NBR seal Single Banjo with Bi-Material Seal, Male BSPP Thread C F F1 H H1 max 1 N Kg 4 G1/ G1/ G1/ G1/ G1/ G1/ G1/ G3/ G1/ G3/ G1/ G3/ G1/ G3/ G1/ G1/ G1/ G1/ G3/ G3/ With bi-material sealing washer The bi-material sealing washers, part number 0139, can be found in chapter
11 Compression Fittings 0119, technical polymer Double Banjo with Captive Sealing Washer, Male BSPP Thread C F F1 H H1 1 /2 N Kg 4 G1/ G1/ G1/ G1/ G1/ G3/ G1/ G3/ G1/ G3/ G1/ G3/ G1/ Thread with pre-assembled washer Sealing washers 002 can be found in Chapter 9. Compression Fittings , zinc-plated steel with NBR seal Double Banjo with Bi-Material Seal, Male BSPP Thread C F F1 H H1 1 /2 N Kg 4 G1/ G1/ G1/ G1/ G1/ G1/ G1/ G3/ G1/ G3/ G1/ G1/ G3/ G1/ G3/ G1/ G1/ G3/ G3/ Thread with pre-assembled washer Bi-material sealing washers, part number 0139, can be found in Chapter 9. Compression Fittings 0 Equal Tube-to-Tube Connector F F1 max 1 Kg
12 Compression Fittings 0113 Equal Tube-to-Tube Connector with Mounting Boss F H H1 1 /2 N Kg Equal Bulkhead Connector F F1 F2 max max 1 3 ØT min Kg Equal Elbow F J max Kg Related Products Parker also offers another type of brass compression fi tting: Metrulok, with a one-piece olive/nut. Do not hesitate to contact us. 5-1
13 Compression Fittings 04 Equal Tee F H J /2 Kg Compression Fittings 0142 Equal Y Piece with Mounting Boss 07 Equal Cross F H max H1 max 1 ØT Kg Compression Fittings F H J /2 Kg
14 Complementary Fittings Reducers, Olives and Nuts This innovative reducer system, using a full range of nuts and olives, enables different diameters of steel, copper, brass or polymer tubes to be fitted onto a single Parker egris compression fitting. Product Advantages Efficient Solution Reduces envelope dimensions Quick and easy to assemble, whatever the diameters and tube material Improved stock management Multiple Combinations Silicone-free A single connector for up to 4 different tube materials and sizes Example: polymer tube 4 mm O.D. copper tube 8 mm O.D. brass tube 12 mm O.D. braided PVC hose 12 mm I.D. A full range of olives and nuts to optimise all assembly operations Pneumatics Cooling Automotive Process ubrication Fluid Transmission Packaging Industrial Machinery Applictions Regulations DI: 97/23/EC (PED) RG: 1907/200 (REACH) DI: 2002/95/EC (RoHS) DI: 94/9/EC (ATEX) Reducer Assembly Procedure Operation Assembly Sequence Assembled Fitting 1 Assemble the reducer Place the reducer in the fitting body. 1 2 Assemble the nut and olive Place the nut and then the olive onto the tube. 2 3 Assemble the nut Push the tubing into the fitting until it butts against the tube reducer. Tighten the nut to the recommended torque (see opposite page). 3 5-
15 Complementary Fittings Assembly Configuration The table and information given below illustrate the large number of options available with Parker egris brass compression fittings. To these must be added the advantages specific to the original Parker egris reducer shown on the previous page. Body 01 No olive required to assemble the plug BNA** BNA** Steel Steel * Polymer No olive required to assemble the tube Compression Fittings plug: 012 Copper, coldrolled brass, polymer tube and barb connectors 0122 and 0 Coiled annealed copper tube Cold-rolled copper tube for vibration and side loading, etc. Coiled annealed copper tube for vibration and side loading, etc. Steel or copper tube: low/medium hydraulic pressure, lubricate before assembly Polymer tube *Assembly specifications for nut-olive This part functions as both olive and nut for flexible polymer tube assemblies: 1. Hand tighten the polymer nut-olive a few turns onto the body of the fitting; the knurling makes this easier. 2. Then introduce the polymer tube and push home into the body of the fitting. 3. Continue manually tightening the polymer nut-olive. 4. Finish tightening using a spanner until the nut body disengages and turns freely, which acts as a torque limiter. N.B.: To avoid damaging the threads, do not insert the tube before hand tightening the nut-olive into the body of the fitting. **Bureau de Normalisation de l'automobile (French Automotive Bureau of Standards) Compression Fittings Recommended Tightening Torque Tightening torque in dan.m = maximum tightening torque of a 01 nut and 0124 olive with copper, brass or steel tube. Nut 01 and C F Nut C F Ø D (mm) F 01 F max. dan.m copper or brass F max. dan.m steel
16 Complementary Compression Fittings 01 3-Piece Reducer 1 2 F Kg : tube to be fitted 2: for a x mm fitting Each of the above part numbers comprises: - a reduction piece - an olive, PN a sleeve nut 5-20
17 Complementary Compression Fittings 0124 Olive Kg Compression Fittings Zinc-plated steel Steel Olive Kg Compression Fittings 0111 BNA* Olive *Bureau de Normalisation de l'automobile Kg Related Products Parker also offers another type of brass compression fi tting: Metrulok, with a one-piece olive/nut. Do not hesitate to contact us. 5-21
18 Complementary Compression Fittings 01 Nut C F Kg 4 M8x Mx Mx M12x M1x Mx M20x M20x M22x M24x M27x M30x M33x M3x Zinc-plated steel Steel Nut C F Kg 4 M8x Mx Mx M12x M1x Mx M20x M20x M22x M24x M27x M30x ong Nut C F Kg 4 M8x Mx Mx M12x M1x Mx M20x M20x M24x M27x M30x Technical polymer Technical Polymer Nut-Olive C F Kg 4 M8x Mx M12x M1x Mx M20x NB: polymer nut-olives should not be used on metal tubes. 5-22
Brass Compression Fitting Range
Compression Fitting Range Fittings Stud Fittings 0105 BSPT Page 5-9 0105 NPT Page 5-9 0101 BSPP/Metric Page 5-10 0101..39 BSPP Page 5-10 0101 Metric Page 5-11 01 BSPP Page 5-11 0109 BSPT Page 5-12 0109
Compression Fittings. Brass Compression Fittings. Stainless Steel Compression Fittings. PL Nickel-Plated Brass Spigot Fittings
Compression Fittings Compression Fittings Stainless Steel Compression Fittings PL Nickel-Plated Spigot Fittings Compression Fittings Compression Fittings Compression Fittings (P. 5-5) Stainless Steel Compression
LF 3600 Push-In Fittings Range
LF 300 Push-In Fittings Range Stud Fittings Straights 375 BSPT Page 1-97 301 BSPP/Metric Page 1-97 31 Metric Page 1-97 31 BSPP/Metric Page 1-9 321 BSPT Page 1-9 331 BSPP/Metric Page 1-9 300 Page 1-9 Push-In
LF 3800/LF 3900 Push-In Fittings Range
LF 300/LF 3900 Push-In Fittings Range Stud Fittings Straights 305 3905 BSPT Page 1-79 305 Page 1-79 301 3901 BSPP/Metric Page 1-79 321 3921 BSPT Page 1-0 321 3921 Page 1-0 331 3931 BSPP/Metric Page 1-0
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD USA web:
Push-In Fittings LF 3000 LF 3200: 3 mm LIQUIfit LF 300 LF 300/ LF 3900 LF 0 PARKER LEGRIS Industrial Connector Systems Products are available from: MARYLAND METRICS P.O. Box 21 Owings Mills, MD 21117 USA
LF 3600 Push-In Fittings
LF 300 In order to meet your technical and environment requirements, Parker Legris designed this range of metal fittings, offering robustness, reliability and resistance to industrial fluids for the most
Function Fittings. Flow Control Regulators. Piloted Function Fittings. Non-Return Valves. LIQUIfit Pressure Fittings. Other Function Fittings
Flow Control Regulators Piloted Non-Return Valves LIQUIfit Pressure Fittings Other Silencers Flow Control Regulators (P. 4-6) Blocking Fittings (P. 4-36) Piloted Non-Return Valves (P. 4-38) Function:
A Complete Range of Adaptors
A Complete Range of Adaptors Adaptors 0143 Page 9-7 0144 BSPT/ Page 9-7 0152 BSPT Page 9-7 0145 Page 9-7 0158 BSPT/ Page 9-7 0117 Page 9-8 0155 Page 9-8 0164 NPT/ Page 9-8 0167 BSPT/NPT Page 9-8 0168 Page
Seal: NBR. Silicone-free. Regulations. DI: 2002/95/EC (RoHS) RG: 1907/2006 (REACH) DI: 97/23/EC (PED)
Non-Return Valves Non-return valves allow compressed air to flow in one direction and prevent it from flowing in the other. Fitted upstream of the circuit to be protected, they provide total protection.
LIQUIfit Push-In Fittings with Metal Adaptors
LIQUIfit Push-In Fittings with Metal Adaptors The LIQUIfit range now benefits from a range extension of metal adaptors designed for liquid transfer applications. These fittings ensure reliable and compact
stainless steel compression fittings
compression fittings principle of compression fittings egris has used its long experience of brass compression fittings to develop a range of compression fittings. These fittings are resistant to aggressive
Function Fittings. Flow Control Regulators. Piloted Function Fittings. Non-Return Valves. Pressure Fittings. Other Function Fittings.
Function Fittings Flow Control Regulators Piloted Function Fittings Non-Return Valves Pressure Fittings Other Function Fittings Silencers Function Fittings 4-3 Function Fittings Flow Control Regulators
connection solutions in stainless steel
connection solutions in stainless steel www.legris.com egris onnectic offers many solutions in stainless steel that are designed for excellent resistance to aggressive / corrosive environments and fluids.
Cartridges and Customised Products
Cartridges and Customised Products 2-2 Cartridges and Customised Products 2-3 2-4 Cartridges Polymer Cartridges Compressed Air Fluids and Gases 3100 Carstick Page 2-8 3086 Quick Fitting Page 2-8 3089 Quick
Rapid push-in fittings for plastic tubes Series 1000
CATALOGUE > Release 8.5 > Rapid fittings Series 1000 Rapid push-in fittings for plastic tubes Series 1000 Tube external diameters: 5/3, 6/, 8/6, 10/8, 12/10, 15/12,5 mm Fittings threads: metric (M5, M6,
LIQUIfit Push-In Fittings
LIQUIfit Push-In Fittings This "eco-designed" range proposes an innovative alternative for water applications; no fluid contamination occurs and environmental protection is guaranteed. These fittings ensure
Needle and Butterfly Valves
Needle Valve In-Line Right-Angled 0502 0501 0510 0532 0531 Drain Valve 0562 BSPP/Metric 0563 NPT Venting Pressure Gauge Valve 0627 BSPP Pressure Relief Valve 0630 BSPP Stainless Steel Needle Valve In-Line
Male stud fittings. Male stud elbow. Fluid... Working pressure... Vacuum level... Rated temperature...
FITTINGS Push - in fittings 431 Series Fluid... Working pressure... Vacuum level... Rated temperature... Torque... Standards... Materials... Compressed air Max. 20 bar (290 psi) 55 mm Hg vacuum (99 %)
FIT-2. Inch. Ø Â" to Ë" O/D tube
For simple and quick assembly of pneumatic circuits. Positive tube connection. Wide range of types available. Reliable and corrosion resistant. Specifications Fluid: Compressed air, nitrogen, inert and
Industrial Valves. Ball Valves LIQUIfit Needle and Butterfly Valves Axial Valves
Industrial Valves Ball Valves LIQUIfit Needle and Butterfly Valves Axial Valves Industrial Valves Industrial Valves Ball Valves, Universal Series (P. 6-8) Ball Valves, Universal Series, Vented (P. 6-13)
37 flare couplings to ISO
Applications Widely used throughout the world, 37 flare couplings are designed for most medium pressure mobile and stationary applications. These couplings are characterized by easy, compact assembly and
Parker Legris: Connecting You to the Best in Technology
Parker Legris: Connecting You to the Best in Technology Principle and Advantages of the Push-In Fitting The push-in fitting is the most intuitive way of connecting tubes to a fitting in order to create
legris products are available from: Maryland Metrics
legris products are available from: Maryland Metrics 2003 2005 New Products atalog web: mdmetric.com email: sales@mdmetric.com push-to-connect fittgs 9000 safety coupler mi ball valves staless steel range
Thermoplastic Hoses. Polyflex/Parflex. Polyflex Presto
Thermoplastic Hoses Motors Valves Actuators Accumulators Filtration Polyflex/Parflex Thermoplastic Hoses for Hydraulic Applications Polyflex Presto Tubing for Pneumatics For pressures up to 700 bar. Single
Product Catalog. Fittings ½ AIR PIPE FITTINGS Fitting, 1/2 Air Pipe End Cap Coupler, with Tank Valve
To complement our extensive line of cable pressurization products, System Studies also sells a variety of air pipe and pressure tube fittings. This section of the catalog describes these commonly used
Parker Legris: LIQUIfit Connection Solutions for Beverages & Fluids
aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding Parker Legris: LIQUIfit Connection Solutions for Beverages & Fluids
Pneufit Inch Series Push-In Tube Fittings 1/8" to 1/2" Tube Sizes UNF to 1/2" NPT Thread Options
Section 1 Pneufit Inch Series Push-In Tube Fittings to 1/2" Tube Sizes 10-32 UNF to 1/2" NPT Thread Options Inch Series Product Numbering System..................FIT-1-2 Inch Series Shapes and odes.........................fit-1-3
Quicklub Lubrication Systems Fittings, Adapters and Accessories
Divider Valve Mounting Accessories 24646 Valve mounting bracket 5304 4" nylon locknut for valve mounting 247023 Grade 8, 4" valve mounting bolt 239499 Template for divider valve mounting (6, 8, 0 and 2
Hi-Duty Flareless Tube Fittings
Hi-uty Flareless Tube Fittings dvantages zfc10 No flaring, soldering or other preparation of tubing is necessary. Pre-assembled brass fitting, with sleeve machined onto nut. This two piece flareless compression
Pneumatics CONTENT
Pneumatics CONTENT 2 3 4 5 6 7 8 9 Fittings 453 Flexible Tube 47 Quick Release Couplings 477 Actuators 485 Solenoid & Pneumatic Valves 495 Mechanical & Manual Valves 507 Automatic Valves 57 Filters, Regulators
VISIT OUR DISTRIBUTION & OPERATIONS CENTER
PUSH IN FITTINGS P V. P. W, P. V. W,, V,. T V I I, USA. W 75% ', V. I, V 300 USA P, M S D, C A, A M, F. T, V P. VISIT OUR DISTRIBUTION & OPERATIONS CENTER Vacuforce LLC 933 Western Drive Indianapolis IN
Parker Legris: LIQUIfit Connection Solutions for Beverages & Fluids
aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding Parker Legris: LIQUIfit Connection Solutions for Beverages & Fluids
EISELE IS QUALITY MADE IN GERMANY AVAILABLE ON STOCK IN GRAND RAPIDS, MI
2 Quality solutions - Made by EISELE EISELE IS QUALITY MADE IN GERMANY AVAILABLE ON STOCK IN GRAND RAPIDS, MI Over 30 patents, more than 8,000 standard articles, and 2,000 customized solutions impressively
H/DL/L/LL Series. Tube. Union nut. Flared I.D. Flared I.D. can prevent the tube from deforming inwards. Specifications
Flared ridge ferrule Prevents accidental loss of ferrule when inserting into the fitting body. Hardened ridge ferrule Prevents breakage of ferrule when tightening nut. Flared I.D. Provides low flow resistance
Easy to assemble Available with long or short nut in wide range of styles and sizes 651 MALE ELBOW 5/16 O.D. TUBE 1/8 PIPE MALE CONNECTOR
A29-1 TM CIC 200 BRASS COMPRESSION TUBE FITTINGS ASSORTMENT P/N 7745 Medium pressure air, oil, water and natural gas applications Manufactured from high density brass alloy No flaring or soldering required
Composite Push-In Fittings BSP/Metric Series 7000
2 Composite Push-In Fittings BSP/Metric Series 7000 NORTH AMERICAN FITTINGS & FLOW CONTROL VALVE CATALOG > Release 8.6 Tube Diameter OD: 4, 6, 8, 10, 12, 16 mm Thread Type: metric (M5, M7), BSP (G1/8,
for plastic tubes CONNECTION > Series 6000 super-rapid fittings GENERAL DATA Fitting with connecting tube Sprint
> Series 6000 super-rapid fittings CATALOGUE > Release 8.8 Series 6000 super-rapid fittings for plastic tubes Sprint Tube external diameters: 3,, 5, 6, 8, 10, 12, 1, 16 mm Fittings threads: metric (M3,
FITTINGS, CONTROLS AND ACCESSORIES
, CONTROLS AND ACCESSORIES Regardless of your application, Norgren has fittings and accessories to complete your pneumatic package. Norgren has an extensive lineup of Pneufit push-in fittings in metric
pneumatic function fittings
Parker Legris connectic products are available from MARYLAND METRIS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 email: sales@mdmetric.com web:
Quicklub Lubrication Systems Fittings, Adapters and Accessories
Divider Valve Mounting Accessories 246416 Valve mounting bracket 51304 ¼" nylon locknut for valve mounting 247023 Grade 8, ¼" valve mounting bolt 239499 Template for divider valve mounting (6, 8, 10 and
Fittings threads: metric (M5), BSP (G1/8, G1/4, G3/8, G1/2, G3/4, G1), BSPT (R1/8, R1/4, R3/8, R1/2, R3/4, R1)
> Series 2000 pipe fittings Series 2000 pipe fittings Fittings threads: metric (M5), BSP (G1/8, G1/, G3/8, G1/2, G3/, G1), BSPT (R1/8, R1/, R3/8, R1/2, R3/, R1) The wide range of Camozzi pipe fittings,
COUPLINGS, VALVES AND TUBING DELTA FLUID PRODUCTS LIMITED
Wade COUPLINGS, VALVES AND TUBING DELTA FLUID PRODUCTS LIMITED DELTA FLUID PRODUCTS LTD Delta Fluid Products have been associated with the manufacturing of Valves and Fittings for Fluid and Gases for over
Fitting assembly. Catalogue /UK
F2 Table of contents Port connections M...F4 Port connections BSPP...F5 Port connections UNF...F6 Port connections TAPER...F7 Adjustable fi ttings with locknut...f8 F EO swivels...f9 Triple-Lok / O-Lok
Engineering Data. Assembly Length. How to Determine Correct Assembly Length
Assembly Length How to Determine Correct Assembly Length For most assemblies, the correct assembly length may be determined by direct measurement of the equipment or a drawing. Minimum bend radii as shown
FLOW CONTROL VALVES & ACCESSORIES
TECHNICAL SPECIFICATIONS construction Valve group Materials Mounting Ports Position Operating temperature PNEUMATIC DATA Operating pressure Nominal pressure nominal flow needle-type Meter In, Meter Out,
BASICLINE PROGRAM. Standard components for pneumatics. pilot operated check valve. Messing. throttle with click function.
BASICLINE PROGRAM Standard components for pneumatics pilot operated check valve Messing throttle with click function rotary connector 2 Quality solutions - Made by EISELE EISELE IS QUALITY MADE IN GERMANY
TABLE OF CONTENTS 8000 SERIES RACE HOSE ENDS 3000 SERIES RACE HOSE ENDS
TABLE OF CONTENTS Technical Specifications & Torque Table Page 2 2012 New Products Page 3 Series 2000 Pro-Flow Race Hose Ends Page 4-5 Series 3000 Race Hose Ends Page 6-8 Series 3000 Direct-Fit Hose Ends
4 PUSH-IN FITTINGS / BRASS PUSH-IN FITTINGS PLUS
PUSH-IN FITTINGS / BRASS PUSH-IN FITTINGS PLUS High performance fittings, easy to be used. Strong but also compact in order to ensure the maximum assembling flexibility. Silicon free materials. In compliance
SMB LOCK Introduction Characteristics Straight plugs Right angle plugs SMB limited detent (SMB-A) Receptacles...
CONTENTS PAGE SMB Introduction... 4 General... 5 Finder guide... 6 Interface... 7 Characteristics...8-9 Straight plugs...0- Right angle plugs...- Jacks... 3 Bulkhead jacks...4-5 Receptacles...6-7 PCB receptacles...
Fittings Metal Push-To- Connect Fittings. We make things MOVE
Fittings Metal Push-To- Connect Fittings We make things MOVE Contents 3 Fittings 4 Product Features 4 Push-In Fittings 4 Features and Benefits 5 How it Works 5 Materials of Construction 5 Fluid 5 Operating
HOSE, TUBE & CONNECTION FITTINGS CATALOGUE. JSG Industrial Systems quality industry solutions. Fire Suppression Systems. Flow Measurement Systems
HOSE, TUBE & CONNECTION FITTINGS CATALOGUE JSG Industrial quality industry solutions Lubrication Management Material Dispensing Management Hose & Cable Management Diesel & Fluid Management Fire Suppression
MINIATURE SOLENOID GENERAL SERVICE VALVES
MINIATURE SOLENOID GENERAL SERVICE VALVES SERIES The Series solenoid valves are designed for use with air and inert gases Highly customizable construction that is suitable for a wide variety of gas applications
Betabite Fittings. Hardy Spicer, 1/9 Monterey Road, Dandenong South, Victoria, 3175 Toll free Ph:
Betabite Fittings, 1/9 Monterey Road, Dandenong South, Victoria, 3175 Toll free Ph: 1300 30 673 Disclaimer The information and dimensions listed in these catalogues is correct to the best of our knowledge
Thread and Connector Identification
How to Use this Section This section is intended as an aid to identifying the most popular threads on hydraulic hose couplings and adaptors, and hydraulic equipment. BSP, Metric, American and Japanese
quality industry solutions
quality industry solutions JSG Industrial Systems HOSE, TUBE & CONNECTION FITTINGS CATALOGUE 2017 JSG INDUSTRIAL SYSTEMS Since its inception in 1968, JSG Industrial Systems has been a proud supplier of
4200/4400 ONE-PIECE NON-SKIVE COUPLINGS
4200/4400 ONE-PIECE NON-SKIVE COUPLINGS 4200/4400 couplings have been engineered to match a wide range of latest generation hose types to provide assemblies that meet the highest global standards. Ferrules
SMA CONTENTS PAGE 9-3
CONTENTS PAGE SMA Introduction... 4 General... 5 Finder guide...6-7 Interface... 8 Characteristics...9-10 Straight plugs...11-12 Right angle plugs...13-14 Straight jacks... 14 Straight flange jacks...14-15
Ferulok Flareless Bite Type Fittings
Flareless Bite Type Fittings Flareless SAE 080101 / Flareless Flareless SAE 080601 / Flareless Flareless SAE 080102 / NPTF Flareless SAE 080120 / SAE-ORB Flareless SAE 080103 / NPTF Flareless SAE 080221
Prestolok 2. Push-in fitting. Catalogue UK
Prestolok Push-in fitting Index Straight connectors male - SPT F3P - p. 6 male - SPP F4P - p. 6 male - metric F8P - p. 7 female - SPP G4P - p. 7 union HPK - p. 7 unequal union HPK - p. 7 90 elbows adjustable
Tube. Flared I.D. Flared I.D. can prevent the tubing from deforming inwards. Specifications
Self-align Fittings Series H, D,, Flared ridge ferrule Prevents accidental loss of ferrule when inserting tubing into the fitting body. Hardened ridge ferrule Prevents breakage of ferrule when tightening
MARCH Polyethylene Piping Systems.
MARCH 2017 Polyethylene Piping Systems www.plasson.com.au GLOBAL PRESENCE LOCAL COMMITMENT Get an expert on your team. Plasson has the widest range of compression, electrofusion, threaded and transitional
Pneumatic: Integrated Fittings
Pneumatic: Integrated Fittings Flow Controls Compact & Miniature Styles Brass & Composite Bodies Right Angle & In-line Inch & Metric Sizes Direct Mounting Check Valves Compact & light weight Inch & Metric
82 Series Fittings Table of Contents
Table of Contents ase Part Number with Description Table of Contents (page 1 of 1)... Page Number 30182 Male NPTF Pipe - Rigid Straight... -234 31382 Male NPTF Pipe - Swivel - Straight... -235 30282 Female
Product warranty. Quality Policy. The Goal
About the Company SEALEXCEL (INDIA) PVT. LTD. is a fast growing manufacturing company in the field of design, development, production and marketing of high quality valves and fittings for international
FLUID POWER FLUID POWER EQUIPMENT TUTORIAL PIPE WORK. This work covers part of outcome 2 of the Edexcel standard module:
FLUID POWER FLUID POWER EQUIPMENT TUTORIAL PIPE WORK This work covers part of outcome 2 of the Edexcel standard module: UNIT 21746P APPLIED PNEUMATICS AND HYDRAULICS The material needed for outcome 2 is
Table of Contents. Page. See Catalog and Product Updates on our Website
2 Table of Contents Page Sapphire Orifice Assemblies... 3-5 Metal Orifice Assemblies - Barb Connections... 6-7 Metal Orifice Assemblies - NPT Connections... 8-9 Metal Orifice Assemblies - Inserts... 10-13
ACCESSORIES & FITTINGS 800 SERIES CONTROL VALVES
ACCESSORIES & FITTINGS 800 SERIES CONTROL VALVES 8 VALVE FITTING PART NUMBERS 2" & 3" PRESSURE REDUCING VALVES* 10645 8970-002 (9526-006) 1/4" tube (9526-006) Flow 8970-001 (9526-001) 8970-010 (9526-010)
Parker Legris Blowguns: A Large Selection to Suit All Applications
Parker egris Blowguns: A arge Selection to Suit All Applications Together, we can connect you to the best in technology. Better than ever before. In the updated edition of the Parker egris catalogue, we
Local solutions for individual customers worldwide PNEUMATIC PIPEWORK COMPONENTS AND ACCESSORIES STAUFF UK. Super Air Service!
Local solutions for individual customers worldwide STAUFF UK PNEUMATIC PIPEWORK COMPONENTS AND ACCESSORIES www.stauff.co.uk PNEUMATIC PIPEWORK COMPONENTS AND ACCESSORIES Tube Connectors In Line Flow Control
MCX Amphenol. Description MCX. 50 Ohm Coaxial Connectors Specifications 18 Straight & Right Angle Crimp 19 Straight Solder & PCB 20-21
Description connectors conform to the European CECC 22220 Spec and was introduced in the 1980 s. While the uses identical inner contact and insulator dimensions as the SMB, the outer diameter of the plug
SERIES 36-AM & BD...4-5 SERIES 36-AM-RA & BD RA...6-7 SERIES 50-AM & BD...8-9 SERIES 36 TOOL CHANGER...10-11 SERIES 50-TOOL CHANGER...12-13 SERVO MOTOR ADAPTERS...14-15...16-17...18-19 COLLET NUT...19
Metal LIQUID TIGHT CONDUIT FITTINGS & ACCESSORIES for Industrial Application
Metal LIQUID TIGHT CONDUIT FITTINGS & ACCESSORIES for Straight, Male 45, Male 90, Male Straight, Female Straight, Cable Hose, Male Straight Swivel Fittings Ferrules for Fittings Further Accessories Applications
Founded in 1941 The World s Largest Manufacturer and Supplier of Piping Components for the Pneumatic Conveying Industry.
Founded in 1941 The World s Largest Manufacturer and Supplier of Piping Components for the Pneumatic Conveying Industry. COUPLING PRODUCTS Compression Couplings Side-Band Couplings Quickon II Couplers
Specialty Fluid Fittings
Buyers guide Specialty Fluid Fittings for lubrication systems FEATURING Couplings & s Adapters Compression fittings Check valves Meter and control units bijur.com B r6-06 Buyer's guide to specialty fluid
3-PIECE TUBE ASSEMBLY
3-PIECE TUBE ASSEMBY STAINESS STEE HIGH PRESSURE 37 TUBE FITTINGS 1/8 TO 2 MEETS SAE STANDARD J514 If necessary, see SAE Standard J514 for a complete list of dimensions. NPT Tapered Pipe Threads meet the
INOX PrOgram made by eisele
EISELE INOXline Program Stainless steel connection solutions Quality solutions Made by EISELE INOX 2 Quality solutions - Made by EISELE EISELE IS QUALITY MADE IN GERMANY Over 30 patents, more than 5.000
Lubrication Systems. Section 26
Lubrication Systems Section 26 26-1 INFORMATION - SYSTEMS The Lincoln QuickLub is an automated and centralised lubrication system that can improve productivity and extend the service life of your plant.
Parker Legris: Connecting You to the Best in Technology
Parker Legris: Connecting You to the Best in Technology Principle and Advantages of Our Connection Systems A very large number of technical solutions exist for connecting two pipes together. Leader in
Quicklub Lubrication Systems
Fittings, Adapters and Accessories Divider Valve Mounting Accessories 246416 Valve mounting bracket 51304 ¼" nylon locknut for valve mounting 247023 Grade 8, ¼" valve mounting bolt 239499 Template for
BRASS FITTINGS and Related Products
Discount Hydraulic Hose.com Cat. BR602 February, 2006 Prices Subject to change BRASS FITTINGS and Related Products Air Brake Fittings: Nylon Tubing 2 Push-In Air Brake Fittings 4 Pre-Assembled Air Brake
Kuhnke Technical Data. Contact Details
Kuhnke Technical Data The following page(s) are extracted from multi-page Kuhnke product catalogues or CDROMs and any page number shown is relevant to the original document. The PDF sheets here may have
SUMMARY STAINLESS STEEL FITTINGS FITTINGS P PUSH-IN FITTINGS, STAINLESS STEEL D3.2 P STANDARD FITTINGS SERIES XA D3.8 P QUICK FITTINGS SERIES XC D3.
SUMMARY STAINLESS STEEL D3 P PUSH-IN, STAINLESS STEEL D3.2 P STANDARD SERIES XA D3.8 P QUICK SERIES XC D3.11 SUMMARY STAINLESS STEEL D3.1 PUSH-IN, STAINLESS STEEL The push-in fittings in the XR can be
Tubing & Hose Metric. Nylon, Polyurethane, Polyester Reinforced PVC, Metal Braided Rubber, Copper, Double Wall Brazed Steel
Tubing & Hose Metric Nylon, Polyurethane, Polyester Reinforced PVC, Metal Braided Rubber, Copper, Double Wall Brazed Steel Available in a variety of different types to suit a wide range of applications
Stainless One-touch Fittings. Applicable Tubing Tube material Tube O.D. Thread Nut
Stainless One-touch Fittings Series KG Guide Collet Chuck Accepts nylon, soft nylon and polyurethane tubes. as large retaining force. Chuck certainly bites tube and collet increases retaining force. Release
MODY Spiral Hoses made of Polyurethane
MODY Spiral Hoses made of Polyurethane both Sides with Straight Ends High abrasion, pressure and wear resistance Extreme and constant recoil of the spiral, small coil diameter Elasticity, flexibility and
Lab Specialty Products Technical Information TECHNICAL INFORMATION WEIGHTS & DIMENSIONS
Lab Specialty Products Technical Information TECHNICL INFORMTION WEIGHTS & DIMENSIONS Contact Spears for any Information not found. Page 569 Lab Ball s Sample Engineering Specification ll thermoplastic
Lubrication Installation Components, Accessories & Fittings Table of Contents
Lubrication Installation Components, Accessories & Fittings Table of Contents Lubrication Fittings & Accessories: Introduction............................................. 2 Threaded Fittings........................................
UNITIZED AIR & FLUID FITTINGS
UNITIZED AIR & FLUID FITTINGS What you ll find in this catalog Thousands of fittings for plastic tubing in sizes and configurations you can't find anywhere else... fittings in brass, stainless steel, and
3 Composite Right Angle Flow Control Valves NPTF/Inch Series TMCU, TMVU, TMCO
Flow Control Valves NPTF NORTH AMERICAN FITTINGS & FLOW CONTROL VALVE CATALOG > Release 8.6 Composite Right Angle Flow Control Valves NPTF/Inch Series TMCU, TMVU, TMCO Swivel Design: Meter-Out, Meter-In
TUBE & PIPE SECTION D
TUBE & PIPE SECTION pirtekusa.com Page General Technical ata for Tube and Pipe... 2 Flow Rate & Temperature Recommendations... 3 Schedule 40, 80, 160 Pipe ata... 3 Tube ata Standard Sizes... 4 TUBE AN
TABLE OF CONTENTS 8000 SERIES RACE HOSE ENDS 3000 SERIES RACE HOSE ENDS
TABLE OF CONTENTS Technical Specifications & Torque Table Page 2 Series 2000 Pro-Flow Race Hose Ends Page 3-4 Series 3000 Race Hose Ends Page 5-7 Series 3000 Direct-Fit Hose Ends Page 8-9 Premium Black
MICRO SOLENOID VALVE pinch mechanism for flexible tube O.D to 9.5 mm
MICRO SOLENOID VALVE pinch mechanism for flexible tube O.D..65 to 9.5 mm U / Series 84 FEATURES Solenoid valve suitable for cutting off the flow of a fluid by pinch For sterile, aseptic, physiological
Brass Push-Type Fittings. Tube Thread. Part O.D. (M) NPT. No. in. in.
Brass Push-Type Fittings MALE ADAPTER SWIVEL MALE ELBOW 35.0 /8 0-3 35. /8 /6 35.4 /8 /8 35.6 5/3 0-3 35.8 5/3 /8 35.34 5/3 /4 35.40 3/6 0-3 35.4 3/6 /8 35.54 /4 0-3 35.56 /4 /8 35.58 /4 /4 35.6 /4 3/8
VACUUM CUPS 2 SECTION 2 VACUUM CUPS 2: EDCO USA.
VACUUM S SECTION VACUUM S 01 EDCO USA. www.edcousa.net :1 VACUUM S CONTENTS BELLOWS S (B) DOUBLE BELLOWS S (B) BELLOWS TRACTION FOOT S (BF) MULTI-BELLOWS S (BL) DEEP S (D) FLAT S (F) FLAT CONCAVE S (FC)
funnels, measures, gravity cocks, jerry cans and oil suction pumps...
funnels, measures, gravity cocks, jerry cans and oil suction pumps lubrication AND ACCESSORIES grease nipples............................................................ GREASE CONNECTORS........................................................
ONE TOUCH FITTINGS Series WP2
ONE TOUCH FITTINGS - M5 1/ 1/ 3/ 1/2 Features Attractive design Compact size ed nipples of L, T & Y fittings enable plastic portion to turn by 30º Full area of the inner bore of the tubing is available
KIT. light duty 6.2L chevrolet/gm diesel. for use on gm 6.2L diesel trucks equipped with the banks sidewinder turbo system
owners manual with installation instructions EMISSIONS KIT light duty 6.2L chevrolet/gm diesel for use on gm 6.2L diesel trucks equipped with the banks sidewinder turbo system this manual is for use with
Innovative Design Maximum Capability
Optimum Performance Innovative Design Maximum Capability www.liquifit.net 7205 East Hampton Avenue Mesa Arizona 85209-3301 Introducing From the Trusted Inventor of the Push-to-Connect Fitting With over
Function Fittings, Flow Controls, and Accessory Valves
Section 3 Function Fittings, Flow ontrols, and Accessory Valves 12 VA Right Angle (anjo) Flow ontrol (inch-knob adj.)..fit-3-3 12 V Right Angle (anjo) Flow ontrol (inch-slot adj.)...fit-3-3 1 TA Right
MCX Connectors Specifications Flexible Cable Semi-Rigid Cable Panel Mount PCB Mount... 22
Section Index Connectors Specifications... 17 Flexible Cable... 19 Semi-Rigid Cable... 20 Panel Mount... 21 PCB Mount... 22 Other Information Assembly Instructions... 176 Cable Assembly... 166 Cable Information...