Miniature Fittings Series M
|
|
- Henry Sherman
- 6 years ago
- Views:
Transcription
1 Miniature Fittings Series M pplicable Tubing: Ø 3.2, Ø 4, Ø 6 onnection Thread:, M, arb onfiguration for easy insertion into the tube Holds the tube tightly ody With electroless nickel plated Low tightening torque Tight seal Hose nipple Tube pplicable for, soft and. ap nut ertainly hold the tube by manual clamping Easy romoval of tube by loosening With electroless nickel plated arb onfiguration for easy insertion into the tube Holds the tube tightly ody With electroless nickel plated arb fitting Tube Low tightening torque Tight seal ompact piping space Hose nipple /dis is simple while keeping a large retaining force. Line up various styles For air in confined areas. ccepts many styles of plastic Hose nipple and hose elbow accepts, soft,. Specifications pplicable material pplicable O.D. / I.D. Thread M, Fluid Max. operating pressure (at 20 ) mbient and fluid temperature onnection size Nylon Ø 4/Ø Soft Polyurethane Super PF (1) Ø 4/Ø Ø 3.1/Ø 2 Ø 4/Ø Ø 3.1/Ø 2 Ø 4/Ø Ø 3.1/Ø Ø 4/Ø FEP (1) ir, Water (2) 1. MPa 1 MPa 0. MPa 1 MPa 1. MPa MPa - to 60, Water: 0 to 40 (No freezing), M, M, JIS 020, lass 2 (Metric fine thread) JIS 0203 (Taper thread for piping) Note 1) ompatible only with hose nipple type. Note 2) arb fitting, barb elbow, barb elbow (H) are not compatible with water. Ø 4/Ø Modified PTFE (1) Ø 4/Ø 1 Made to Order (Refer to page for details.) Principal Parts Material Material ody 3604D (Nipple M-3N, M-N: Stainless steel 303) Nylon 66: GF30 %, Stainless steel 304: NR (PV for ) Fitting Markings for pplicable Tubing Material (arb fitting, arb elbow, arb elbow (H)) Tubing material determines the compatible fittings. (Refer to the table below.) onnection, M Tubing Soft Polyurethane Nylon Soft Polyurethane ody of M-E, M-ER, M-M is not surface-treated. Electroless nickle plate treated is available as option -X2. Fitting marking for applicable material arb fittings arb elbow arb elbow (H) Marking Marking Marking
2 Miniature Fittings Series M Series, R 1/ Series M Series Description pplication Note M-3U-3 M-3U-4 M-3LU-3 M-3LU-4 M-3UL 1 M-3UT M-3N M-3P M-01N-4 M-01U-6 Hose nipple M-01H-4 M-01H-6 arb fitting for soft tube arb elbow for soft elbow tee Nipple Plug Series Description pplication Note arb fitting for M-01N-6 arb fitting M-01U-4 for soft R ody rotates ody rotates ody rotates Fitting to workpiece and fitting to fitting Use to plug unused port For and For, soft Ø 3.1/ x Ø 3.1/2 x x Ø 3.1/ x Ø 3.1/2 x x female x male female x female x male male x male x x x x x x Series Description pplication Note Series Description pplication Note M-N-4 M-N-6 M-U-3 M-U-4 M-U-6 M-LN-4 M M-LHN-6 M-LN-6 arb elbow for soft M-LU-3 M-LU-4 M-LHU-3 M-LHU-4 M-LHU-6 M-H-4 M-H-6 M-HLH-6 arb fitting for For arb fitting for soft arb elbow for For ody rotates around the ody rotates at 360 M-LU-6 arb elbow (H) M-LHN-4 for ody rotates arb elbow (H) for soft ody rotates Hose nipple For For, soft and Hose elbow M-HL-4 For, soft and M-HL-6 ody rotates Hose elbow (H) M-HLH-4 Elbow and Ø 3.1/ Ø 3.1/2 Ø 3.1/ Ø 3.1/2 Ø 3.1/ Ø 3.1/2 M-T M-UL M-UT M-J M-N M M-UN M-E M-ER M-M M- M-P Tee elbow tee ulkhead union ulkhead reducer oth sides allow 90 ody rotates ody rotates Extention fitting Solid piece moves fitting up from workpiece Nipple nipple Manifold ushing Plug Fitting to workpiece and fitting to fitting ody rotates Panel-mount Reduction from Rc 1/ to M including panel or bracket mounting For reducing R 1/ female to M. Use to plug unused M port. M female female female M female male M female female male M male female M male male M male male PT. M female female Rc 1 female For reducing Rc 1/ female be Rc 1 diverted to up to 9, female M stations, (9 stations) including panel or bracket mounting female M-L One-sided 90 elbow M female female 2
3 Series M Series arb Fitting for Soft Tubing: M-3U-3 flats arb Fitting for Soft Tubing: M-3U-4 flats : 0.9 mm 2 : 0.6 g : 0.9 mm 2 : 0. g arb Elbow for Soft Tubing: M-3LU-3 flats arb Elbow for Soft Tubing: M-3LU-4 flats Elbow: M-3UL : 0.6 mm 2 : 0. g : 0.6 mm 2 flats Tee: M-3UT 2 x : 0.9 g flats : 0.6 mm 2 : 1.6 g : 0.6 mm 2 : g Nipple: M-3N Plug: M-3P flats flats : 0.6 g : 0.9 mm 2 : 0. g Series R 1/ arb Fitting for Nylon Tubing, Soft Tubing: M-01-4/-6 pplicable Nylon Soft M-01N-4 M-01N-6 M-01U-4 M-01U Ø Hose Nipple: M-01H-4/-6 M-01H-4 M-01H Ø 3 6. E
4 Miniature Fittings Series M Series M arb Fitting for Nylon Tubing: M-N-4/-6 M-N-4 M-N-6 14 Ø arb Fitting for Soft Tubing: M-U-3/-4/-6 Ø M-U M-U M-U-6 14 flats flats arb Elbow for Nylon Tubing: M-LN-4/-6 arb Elbow for Soft Tubing: M-LU-3/-4/-6 M-LN-4 M-LN-6 M-LU-3 M-LU-4 M-LU M-LN-4 M-LU-3/-4 M-LN-6 M-LU-6 arb Elbow for Nylon Tubing: M-LHN-4/-6 arb Elbow for Soft Tubing: M-LHU-3/-4/-6 M-LHN-4 M-LHN-6 M-LHU-3 M-LHU-4 M-LHU M-LHN-4 M-LHU-3/-4 flats M-LHN-6 M-LHU-6 flats Hose Nipple: M-H-4/-6 M-H-4 M-H Ø E 6. H flats H 4
5 Series M Series M Hose Elbow: M-HL-4/-6 M-HL-4 M-HL D Ø E Ø F Hose Elbow: M-HLH-4/-6 M-HLH-4 M-HLH D Ø E Ø F 6. G. 6 H 1 16 I flats Elbow: M-L Tee: M-T : 4.2 g : 3. g Elbow: M-UL Tee: M-UT flats 2 x flats : mm 2 :.3 g : mm 2 : 4. g Extension Fitting: M-J Nipple: M-N flats flats : mm 2 : 3.6 g : mm 2 : 1. g Nipple: M-UN flats flats ulkhead Union: M-E M x 0. Mounting hole Mounting plate thickness 3. max. : mm 2 : 3.9 g For the plate thickness 3. to 6 mm, give the plate tapping M x 0., and then screw-in. : 4.6 g
6 Miniature Fittings Series M Series M ulkhead Reducer: M-ER Manifold: M-M Rc 1 M x 0. M x 0. 9 x flats 14 Mounting hole flats 14 Mounting plate thickness 3. max. 2 x ø. flats 1 For the plate thinkness 3. to 6 mm, give the plate tapping M x 0., and then screw-in. : g Panel mounting plate thickness max. 3. mm For the plate thinkness 3. to 6 mm, give the plate tapping M x 0., and then screw-in. : 9 g ushing: M- Plug: M-P 10.1 flats :. g : 1.3 g Tightening of /M Threads aution 1. Tighten by hand, and give it an additional turn with a wrench. Please check the number of tightening revolutions using the table below. If tightened excessively, thread portion may be damaged and gasket may be deformed. This will cause air leakage. On the contrary, if tightened insufficiently, thread may loosen causing air leakage. Thread M M-3U- M-3N M-3P M-3LU- M-3UL M-3UT M-N- M-U- M-H- M-J M-N M-UN M-P M-LN-6 M-LU-6 M-LHN-6 M-LHU-6 M-HL- M-HLH- M-LN-4 M-LU-3,4 M-LHN-4 M-LHU-3,4 M-UL M-UT Number of tightening rotations pprox. 1/4 rotations pprox. 1/2 rotations pprox. 1/6 to 1/4 rotations Note) pprox. 1/2 rotations Note) Note) s a guideline, the tightening torque should be 1 to 1. N m. Precautions Use of Tube with Hose Nipple aution 1. ut the tube perpendicularly to the tube axis to a little longer than required length. (Use tube cutter TK-1, TK-2 or TK-3.) 2. Pass the tube through the cap nut. 3. Push the tube until it comes to the end of the barb portion, or it may cause air leakage or hose releasing. 4. Tighten the cap nut firmly by hand on the fitting. Use of Tube with arb Fitting aution 1. ut the tube perpendicularly to the tube axis to a little longer than required length. (Use tube cutter TK-1, TK-2 or TK-3.) 2. Push the tube until it comes to the end of the barb portion, or it may cause air leakage or release hose. 6
7 Series M Made to Order Specifications Please contact SM for detailed dimensions, specifications, and delivery. 1 Material Modification Symbol Specifications material: Stainless steel 304, NR pplicable thread part no. X3 IN M Note) M-G2 material: Stainless steel 304, FKM X226 pplicable thread part no. G-DPH0049 material: Stainless steel 316, Special FKM X1 pplicable thread part no. M M-G3 Note) ompatible with only models using M-GH. Spare Parts Description Part no. pplicable thread Material pplicable model M-3G PV M-G1 PV M-G2 Stainless steel 304, NR M-G3 M-GH M Stainless steel 316, Special FKM Nylon 66, GF30 % M-L -6, M-LH -6 M-HL-4, 6, M-HLH4, 6 M-6G M-10/32G M UNF Stainless steel 304, NR For KQ2 M6 thread Series KQ2, UNF ap nut M--4-P01 M--6-P (With electroless nickel plated) 3604 (With electroless nickel plated) M-01H-4, M-H-4 M-HL-4, M-HLH-4 M-01H-6, M-H-6 M-HL-6, M-HLH-6
Tube Applicable for nylon, soft nylon and polyurethane tubing.
Miniature Fittings Series M pplicable Tubing: ø3.2, ø4, ø6 onnection Thread:, M, arb onfiguration for easy insertion into the tube Holds the tube tightly ody With electroless nickel plated Low tightening
More informationTubing. Barb. Sleeve. Attaching the sleeve achieves a larage retaining force. Detaching it allows easy removal of the tube. Electroless nickel plated
iniature Fittings Series pplicable Tubing: ø2 onnection Thread:, RoHS ade to Order (Refer to page 9 for details.) pplicable O.D. x I.D.: ø2 x ø.2 onnection thread: / One-touch fitting size: ø.2 / ø Tubing
More informationSeries 10-M. RoHS. Miniature Fittings. Construction. Tubing. Tubing. Barb. Barb. Body. Cap Nut. Gasket. Body. Gasket.
Series 10-M Miniature Fittings onstruction RoHS irectional ontrol Valves arb onfiguration for easy insertion into the Holds the tube tightly. ody lectroless plated nickel Low tightening torque Tight seal
More informationSeries 10-M. Miniature fittings. Construction. Tubing. Tubing. Barb. Barb. Body. Cap nut. Gasket. Body. Gasket Low tightening torque Tight seal
onstruction Miniature fittings Hose nipple arb fitting arb onfiguration for easy insertion into the Holds the tube tightly. ody lectroless plated nickel Low tightening torque Tight seal Tubing ap nut ertainly
More informationMiniature Fittings Stainless Steel 316. Hose nipple. Barb Configuration for easy insertion into the tube Holds the tube tightly.
Miniature Fittings Stainless Steel 316 Series MS Applicable Tubes: ø3.2, ø4, ø6 Connection Thread:, R 1/ For use in corrosive environments Compact piping space Tube has a large retaining force. Hose nipple
More informationMiniature Fittings Stainless Steel 316. Hose nipple. Barb. Configuration for easy insertion into the tube Holds the tube tightly.
iniature Fittings Stainless Steel 316 Series S RoHS Applicable Tubes: ø3.2, ø4, ø6 Connection Thread:, R 1/ For use in corrosive environments Compact piping space Tube has a large retaining force. Hose
More informationH/DL/L/LL Series. Tube. Union nut. Flared I.D. Flared I.D. can prevent the tube from deforming inwards. Specifications
Flared ridge ferrule Prevents accidental loss of ferrule when inserting into the fitting body. Hardened ridge ferrule Prevents breakage of ferrule when tightening nut. Flared I.D. Provides low flow resistance
More informationTube. Flared I.D. Flared I.D. can prevent the tubing from deforming inwards. Specifications
Self-align Fittings Series H, D,, Flared ridge ferrule Prevents accidental loss of ferrule when inserting tubing into the fitting body. Hardened ridge ferrule Prevents breakage of ferrule when tightening
More informationMiniature Regulator. Standard Specifications. Model IN side OUT side (Applicable tubing O.D.) Proof pressure Maximum operating pressure
Miniature Regulator Series 00F Compact and lightweight ( g) Low cracking pressure 0.0 MPa Standard model equipped with backflow function Standard Specifications Port size Fluid side side (Applicable tubing
More informationRectangular Multi-connector. No. of Connecting Tubes: 10, 20. Plate. Plug connector Socket connector PAT.PEND
Rectangular Multi-connector KDM Series No. of Connecting Tubes: 1, 2 RoHS Multi-connector is effective in saving labor for separate transportation of the panel and the machine, and for exchanging units
More informationValve Built-in self-seal mechanism. Air does not exhaust after removal of tubing. Stopper Cushion. Release button(blue) Guide Collet Chuck
O-ring O-ring Retainer Spring One-touch fitting (built-in self-seal mechanism) to prevent air exhaust when removing tube. Best for multiple use areas when pressure cannot be shut down. types are available.
More informationSpeed Controller with Indicator
Speed Controller with Indicator The numerical indication of flow rate knob rotations reduces flow setting time and setting errors! Elbow Universal Brass Electroless nickel plated RoHS Stainless steel 1
More informationApplicable tube O.D. ø3.2, ø4, ø6 Thread M3, M5, R(PT) 1/8 Series KJ. Applicable Tubing. Tube materterial Tube O.D. Specifications
iniature One-touch Fittings One-touch ini pplicable tube O.D. ø, ø, ø,, R(P) 1/ Series KJ Guide 1 Guide Chuck ccepts nylon and polyurethane tubes. as large retaining force. Release button (ight gray) Small
More informationDigital Catalog. Operation can be made from the toolbar at the center of the lower portion of the screen.
Digital Catalog Click here to display the contents. Click here to download the PDF file. Operation can be made from the toolbar at the center of the lower portion of the screen. O-ring O-ring Retainer
More informationSpeed Controller with One-touch Fitting
Speed Controller with One-touch Fitting S Series Push-lock Type Reduces labor time! Easy to use Easy to lock Unlock Push-lock type Lock Improved tube insertion/removal Max. Insertion force: 30% (8 N) reduction
More informationHow to Order Valve. Body type. Symbol Body type B Base mounted with screws 10 S070 B 5 B G 10 S070 C 5 B G 32. Body type.
Series -S00 ompact Direct Operated Port Solenoid Valve ontrol Valves ase mounted ody ported lean Series lean Series V S R oil voltage 24 VD VD VD VD VD Power consumption Pressure specification Flow rate
More informationApplicable Tubing. Tubing material Tubing O.D. Specifications. Fluid Air/Water (1) Operating pressure range (2) Principal Parts Material
Flame Resistant (Equivalent to UL-94 Standard V-0) FR One-touch Fittings KR-W2 Series RoS Guide Collet Chuck ccepts nylon. Large retaining force. he chuck provides secure retention and the collet increases
More informationApplicable Tubing. Tubing material Note1) Tubing O.D. Note 1) ø2 is available in polyurethane only. Specifications
One-touch Mini : Metric Size Connecting : M3, M5, R1/8 Outside diameter reduced y 0% (Compared with series KQ), allowing piping in a narrower space. Thread sealant as standard. For application requiring
More informationPlug: KBP Elbow module: KBV Female connector union: KBH. Tubing. Guide. Chuck Collet. O-ring Lock ring. Spring Spring guide. Specifications.
Piping Module Series KB RoHS Plug: KBP Elbow module: KBV Female connector union: KBH Lock ring Plug body hread Spring Spring guide Release button (blue) Seal Stud Universal elbow body ubing Guide Chuck
More informationInsert Fittings. Series KF. Superior tube mounting. A reliable seal Holds the tube tightly
Insert Fittings Series KF A reliable seal Holds the tube tightly Insert An insert mechanism can provide reliable retaining force on tubes made of a wide variety of materials Tube grip (resin sleeve) Tube
More informationMinimal Fitting Series
http://www.pisco.co.jp FITTING CONTROLLER VALVE TUE MAKE-TO-ORDER PRODUCTS Ultra-Small arb Fitting for Pneumatic Piping Fitting 266 Suitable for Vacuum Piping by a Combination with Vacuum Tube Suitable
More informationCompact / Lightweight 2 Port Solenoid Valve
ompact / Lightweight 2 Port Solenoid Valve /-XF For ir/water ompact / Lightweight resin body (PPS) Weight: 20 g (-XF) RoHS IP65 mm Power consumption 3 W (Standard) 0.5 W (With power-saving circuit) 48
More informationSpeed Controller with One-touch Fitting AS13 1F-M3 AS13 1F-M5. Specifications
Speed Controller with One-touch Fitting Series Minimizes installation time and cost Reduces the mounting height and enables compact machinery design. Effective area is larger than the former model. Tube
More information3 Port Solenoid Valve
Rubber Seal Port Solenoid Valve Series Manifold Single Unit ase Mounted Manifold VV01 V100 ar base P.18 ody Ported P.10 ase Mounted P.10 VQD VKF VK VT VS Separable base ody Ported Manifold P.1 Stacking
More informationSpeed Controller with Uni One-touch Fitting Push-lock type. New-stand male threads for piping that reduces the screw-in time by 1/3. Model.
Speed Controller with Uni One-touch Fitting Push-lock type Series Elbow Universal Brass New-stand male threads for piping that reduces the screw-in time by 1/3. Gasket Female thread Rc, G NP, NPF Shape
More informationSUPPLY JOINTS CONTENTS
ACCESSORIES GENERAL CATALOG AIR TREATMENT, AUXILIARY, VACUUM, AND FLUORORESIN PRODUCTS CONTENTS Specifications, Order Codes, Size Table 371 Dimensions 373 NCU Specification Order Codes, Model Table 379
More informationAir Suction Filter / In-line Type With One-touch Fittings. Model ZFC ZFC ZFC ZFC ZFC ZFC ZFC ZFC051-03
In-line type air suction filter is used to prevent vacuum equipment trouble from occurring due to dust in the air IN/OUT straight piping Easy installation and removal with one-touch fittings Light and
More informationMain Block Series. Concentrated Branching Joint for Assembly. Assembling Manifold Blocks for Concentrated Branching
http://www.pisco.co.jp FITTING CONTROLLER VALVE TUE MAKE-TO-ORDER PRODUCTS Concentrated ranching Joint for Assembly Main lock 310 Assembling Manifold locks for Concentrated ranching Same Flow Rate with
More informationSpace saving, compact model available
Compact Type High Purity ir Operated Chemical Liquid Valve Series RoHS LV Space saving, compact model available Compact type model is introduced as a new series to complement current series with integrated
More informationStandard Specifications
Miniature Regulator ARJ020F Compact and lightweight (6g) Low cracking pressure 0.02MPa Standard model equipped with backflow function Standard Specifications Port size IN side OUT side (Applicable tube
More informationSpeed Controller with One-touch Fitting
Speed Controller with One-touch Fitting Series Elbow Type Reduces labor time! Elbow Brass Stainless steel Electroless nickel plated Stainless steel 33 RoHS TMH y Easo t e us Push-lock type Larger handle
More informationMini Free Mount Cylinder
Mini Free Mount Cylinder Series ø, ø, ø, ø, ø, ø1, ø Series 1 ction Stroke 1 2 0 0 0 Clean uto switch series None Rod end Male threaded Without thread Solid state switch D-F D-M9 D-M9 W Female threaded
More informationCompact Hydraulic Cylinder. ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100. How to Order Z73. Bore size. 20mm 25mm 32mm 40mm 50mm 63mm 80mm 100mm
ompact ydraulic ylinder MPa Series KG ø, ø, ø, ø, ø, ø, ø, ø0 With uto Switch With auto switch (built-in magnet) KG DKG Mounting: asic type 0 ore size ow to Order mm mm mm mm mm mm mm 0mm Z3 Refer to "uto
More informationPneufit C composite and Pneufit M fittings Inch Ø 1/8... 1/2 O/D tube
Pneufit composite and Pneufit M fittings Ø 1/8... 1/2 O/D tube Norgren Pneufit fittings are ready to use, offering fast assembly with no need for tools providing optimum flow. Pneufit offers a broad range
More informationStandard Specifications
Miniature Regulator ARJ020F Compact and lightweight (6g) Low cracking pressure 0.02MPa Standard model equipped with backflow function Standard Specifications Port size IN side OUT side (Applicable tube
More informationOne-touch Fittings 23% 24% 57% KQ2-G Series CAT.ES50-39A. 30% reduction. force 20% reduction 1. Stainless Steel. Improved tube insertion/removal
Stainless Steel One-touch Fittings etal material: Stainless steel 303 RoS Improved tube insertion/removal Insertion : force ax. 30% reduction ax. Removal : force 20% reduction : Tube removal strength is
More informationMiniature Regulator Series ARJ310
Miniature Regulator Series 30 Compact and lightweight (Main body 65 g) 8.3 Improved flow characteristics 0. 0. 0 00 00 300 400 500 Allows smaller mounting pitch 8.8mm 0-M5 30-0 Inlet pressure: MPa Accommodates
More informationLight Coupling Series
http://www.pisco.co.jp FITTING ONTROLLER VALVE TUE MAKE-TO-ORDER PRODUTS Push-In Fitting oupling Light oupling 342 oupling with Push-In Fitting. Easy oupling and Uncoupling with One-Hand Operation. Suitable
More informationRectangular Multi-connector. No. of Connecting Tubes: 10, 20. Plate. Plug connector Socket connector PAT.PEND
Rectangular Multi-connector Series KDM No. of Connecting Tubes: 10, RoHS Multi-connector is effective in saving labor for separate transportation of the panel and the machine, and for exchanging units
More informationStandard Specifications
Miniature Regulator ARJ020F Compact and lightweight (6g) Low cracking pressure 0.02MPa Standard model equipped with backflow function Standard Specifications Port size IN side OUT side (Applicable tube
More informationSPEED CONTROLLERS WITH QUICK FITTINGS
SPEED CONTROLLERS WITH QUICK FITTINGS Union Straight Type Fittings for controlling the speed of actuators, such as cylinders. Superior flow rate characteristics and fine tuning adjustments in the low flow
More informationHow to Order. Nil M. Action S T. Load voltage Wiring. M9NV 5 V, 12 V 3-wire (PNP) M9PV 12 V. F9NWV 5 V, 12 V 3-wire (PNP) F9PWV
ompact ylinder: Standard Type Single cting, Single Rod, Spring Return/Extend Series QS ø, ø, ø, ø How to Order QS S QS S FWV S uilt-in magnet Mounting style Through-hole/oth ends tapped common (Standard)
More informationVacuum System Peripherals
Vacuum System Peripherals Vacuum Regulator/Electronic Vacuum Regulator Vacuum regulator: IRV0/0 Electronic vacuum regulator: ITV009/ITV09 Directional Control Valve Selection guide of directional control
More informationTwo Hand Control Valve
Two Hand Control Valve Series n output is available through synchronized, twohanded operation (within 0.5 s)! Conforming to EN574 RoHS (Interchangeable with XT92-67 ) Example of a basic circuit diagram
More informationRod end male thread. With rubber bumper 056(9/16") 075(3/4") 106(1 1/16") 150(1 1/2") 250(2 1/2") 300(3")
T.ID0-1 New ompact ylinder Series NQ8 ore size: 06(9/16 ),(/ ),106(1 1/16 ),(1 1/ ) 00( ),0( 1/ ),00( ),00( ) Now available in 00 ( ) and 00 ( ) bore sizes Standard type ctuation Style uilt-in magnet Rod
More informationASP330F-01 ASP430F-02 ASP530F-03 ASP630F-04 ASP430F-F02 ASP530F-F03 ASP630F-F04 R 1/4 R 3/8 R 1/2 R 1/4 R 3/8 R 1/2 NPT 1/8 NPT 1/8 NPT 1/4
Pilot check valve and speed controller are combined. Realizes momentary intermediate stoppage of a cylinder and able to adjust speed control of it. Work piece Example of drop prevention circuit Tubing
More informationPneufit C composite and Pneufit M fittings Inch
Pneufit composite and Pneufit M fittings Inch Ø 1/8... 1/2 O/D tube Norgren Pneufit fittings are ready to use, offering fast assembly with no need for tools providing optimum flow. Pneufit offers a broad
More informationFor Pneumatic Piping/Fittings & Tubing Prior to Use
For Pneumatic Piping/Fittings & Tubing Prior to Use Fittings with Sealant Seal material (fluororesin) is coated on the thread part to the proper thickness and within the proper coating range, which reduces
More informationHigh Purity Chemical Valve Compact Type. Space saving, compact type is available. Piping from 4 directions are possible.
High Purity Chemical Valve Compact Type Series Space saving, compact type is available. Compact type is introduced as a new series to complement conventional Series with integral fittings. Select a series
More informationTajimi Electronics Co
1108 series 1108 series connectors are built compact and the tight waterproofing mechanism allows the model to be at a depth 30 meters under water. This model is also ideal for application where units
More informationSpeed Controller with Indicator
Speed Controller with Indicator Numerical indication of handle rotation for flow rate reduces flow setting time and setting errors! Indicator window Body size Body size or larger Indicator window Number
More informationStandard Specifications Model. How to Order. Mist spray unit. Recommended Equipment. Mixing valve
Mist Spray Unit Series MU/ Intermittent spray to cutting and press gear chains, etc. Standard Specifications MU MU Inlet air Oil tank set range. MPa. to. MPa Oil tank capacity (cm ) Total capacity: Effective
More informationFIT-2. Inch. Ø Â" to Ë" O/D tube
For simple and quick assembly of pneumatic circuits. Positive tube connection. Wide range of types available. Reliable and corrosion resistant. Specifications Fluid: Compressed air, nitrogen, inert and
More informationHow to Order 1 T Z A. r Pressure range. 05 Pressure range 0 to 0.5 MPa 10 Pressure range 0 to 1 MPa 16 Pressure range 0 to 1.6 MPa
oolant Valve Series S External pilot solenoid S ir operated S How to Order 0 0 Y 0 0 T Z q w e r t y u i o!0!!!!! q Series S00 S00 S00 w Valve type ormally closed ormally open e Seal material R FKM r Pressure
More informationHow to Order. Body size
Standard Type Series N 00 Over 30 db () noise reduction Low back pressure Compact and easy mounting How to Order N 400 04 Body size 200 300 400 500 600 700 800 900 Thread type Symbol Type Nil R N NPT Symbol
More informationPneumatic Fittings & Tubing
Pneumatic Fittings & Tubing General Information Fitting escriptions Working Pressure Style Maximum Nominal onstruction pplication ompatible Tubing Poly-Flo 500 PSI 125 PSI Three-piece: body, nut Pneumatic
More informationONE TOUCH FITTINGS Series WP2
ONE TOUCH FITTINGS - M5 1/ 1/ 3/ 1/2 Features Attractive design Compact size ed nipples of L, T & Y fittings enable plastic portion to turn by 30º Full area of the inner bore of the tubing is available
More informationAir Suction Filter. Series ZF. Prevent from occurring vacuum equipment trouble due to dust from vacuum pad ZFA ZFB ZFC
Air Suction Filter Series ZF Prevent from occurring vacuum equipment trouble due to dust from vacuum pad Series ZFA ZF Universal joint type Features Long maintenance cycle type (Large filter surface) Adaptable
More informationTube Fitting PP Series
http://www.pisco.co.jp FITTING ONTOLLE VALVE TUE MAKE-TO-ODE PODUTS Push-In Fitting Type for lean Environment Tube Fitting 178 opper alloy free material Nongrease lean-room packaging option hemical Industry
More informationStandard Specifications. Model IN side OUT side Fluid Proof pressure Maximum operating pressure
Miniature Regulator Series ARJ1020F 2 Construction/Dimensions Lock nut M8 X 0.75 Panel screw Panel mounting hole Precautions Be sure to read before handling. Refer to pages 14-21-3 to 14-21-4 for Safety
More informationStainless Steel 316 One-touch Fittings
CT.ES50- Stainless Steel One-touch Fittings aterial etal parts: Stainless steel Seal parts: Special FK Can be used with steam Operating fluid temperature 5 to 0 C Grease-free tubing material FEP, PF, Nylon,
More informationTube Fitting EG Series
FITTING ONTROLLER VALVE TUE MAKE-TO-ORDER PRODUTS Push-In Fitting Type for Anti-Static Environment 196 ESD Static dissipative Resin Suitable for Electrostatic dissipating and Antistatic Applications. Anti-spatter
More informationTube Fitting Brass Series
http://www.pisco.co.jp FITTING ONTO VV TU MK-TO-OD PODUTS rass Push-In Fitting Type for Spatter-Proof Tube Fitting rass 212 N, FKM, N for Seal ubber Selection esistant to Flame and Weld Spatter Superior
More informationSeries variation. Speed control valve SC* For 2.5 to 450 cylinders. * Refer to page 854 for line type.
Series variation Model / appearance Miniature speed Miniature in out control valve Direct piping / elbow type Model no. SM SM SDM SDM SRM SR SR Port size (Rc or R) S* For. to cylinders pplicable tube O.D.
More informationFlame hardening steel. The height from the reference hole to the surface of the reference support block can be selected from 2 types HIGH or LOW.
is separated from the reference. INFORMTION Responses to reduction of spare parts, short lead times, and a drastic reduction of special orders Pin Plate ylinder ( machinable type) 1 HIGH type Flame hardening
More informationOdor Removal Filter. Model. Note) 1 8, , , , 3 4. Model/Free Standing Type AMF (2B)JIS 10K FF flange
fficiently can remove odor in compressed air with an activated carbon element. The unit is designed for use in the area such as a clean room where odors must be avoided. an remove odor and gas ingredients
More informationMale stud fittings. Male stud elbow. Fluid... Working pressure... Vacuum level... Rated temperature...
FITTINGS Push - in fittings 431 Series Fluid... Working pressure... Vacuum level... Rated temperature... Torque... Standards... Materials... Compressed air Max. 20 bar (290 psi) 55 mm Hg vacuum (99 %)
More informationStainless One-touch Fittings. Applicable Tubing Tube material Tube O.D. Thread Nut
Stainless One-touch Fittings Series KG Guide Collet Chuck Accepts nylon, soft nylon and polyurethane tubes. as large retaining force. Chuck certainly bites tube and collet increases retaining force. Release
More information1 Pneumatics. Transmitters VR4151 VR4152 VR1210 VR1220 VR1210F VR1220F VR1211F VR VR3200 VR3201 VR3100 VR3110
Best 1 Pneumatics Transmitters Relay valve P. 1900 Side piping: 30 x 53 x 91 Bottom piping: 30 x 8 x 91 VR151 VR152 Effective area (mm 2 ) Number of ports Function 7 5 Metal Spool Shuttle valve P. 1902
More informationPneufit Inch Series Push-In Tube Fittings 1/8" to 1/2" Tube Sizes UNF to 1/2" NPT Thread Options
Section 1 Pneufit Inch Series Push-In Tube Fittings to 1/2" Tube Sizes 10-32 UNF to 1/2" NPT Thread Options Inch Series Product Numbering System..................FIT-1-2 Inch Series Shapes and odes.........................fit-1-3
More informationSpecifications Valve. Construction. Component Parts No. 1. Description. Body. Knob. Cover Cam ring Stem Spring guide Spring Seal O-ring Valve Cassette
Finger Valve Series VHK ohs Large effective area:.0 to 7.5 mm Small knob operating force: 0.04 to 0.4 N m Poppet valve construction seldom suffers seal defection. The series begins with the min. tubing
More information3, 5 port pilot operated valve Pneumatic valve / master valve. Discrete valve. Manifold
K/K, pilot operated valve neumatic valve / master valve MNE0 MNE0 M MN W WG MNS0 MNS0 T L-/ S/0 S/ K/ F CONTENTS Safety precautions 776 Discrete valve ody ing (K/K to ) 868 Sub-plate ing (K to ) 87 Manifold
More informationASP330F-01 ASP430F-02 ASP530F-03 ASP630F-04 ASP430F-F02 ASP530F-F03 ASP630F-F04 ASP330F-N01 ASP430F-N02 ASP530F-N03 ASP630F-N04
Speed Controller with Pilot Check Valve with One-touch Fitting Series ASP Pilot check valve and speed controller are combined. Realizes momentary intermediate stoppage of a cylinder and able to adjust
More informationCompact Hydraulic Cylinder
ompact Hydraulic ylinder Series HQ HQ Series HQ HK HN HM HS H2 H Nominal pressure:. MPa ore size :,,,,,, . MPa ompact Hydraulic ylinder Double cting/single Rod Series H Q ø, ø, ø, ø, ø, ø, ø With uto Switch
More informationSpecifications. Construction. Component Parts No. 1. Description. Body. Knob. Cover Cam ring Stem Spring guide Spring Seal O-ring Valve Cassette
Finger Valve Series RoHS Large effective area:.0 to 7.5 mm Small knob operating force: 0.04 to 0.4 N m Poppet valve construction seldom suffers seal defection. The series begins with the min. tubing O.D.
More informationCompression Fittings 36 Series Metric
6 Series 4 mm 28 mm O/ l l l l Wide range of types and sizes Rugged and durable Suitable for use under extreme conditions of pressure and temperature Ideal for most general industrial applications Technical
More informationPilot Operated 2 Port Solenoid Valve for Dry Air
Pilot Operated Port Solenoid Valve for Dry ir VQ0/30 Series Compact and lightweight with large flow capacity [Option] VQ0 Weight (g) 46 80 C [dm 3 /(s bar)].5 (C8) 3.0 (C) Series VQ0 Series VCH VDW SX0
More informationHow to Order. M5 M5 x 0.8 U10/ UNF
Series -S-FSG Push-lock ype RoHS Speed Controller with Indicator Stainless Steel ype (Elbow/Universal) How to Order 1 ype 2 Elbow 3 Universal Body size -32UNF Port size 5 U/32-32UNF Stainless steel type
More informationAN 00/AN 02/AN 03/25/AN
Silencer AN 00/AN 02/AN 03/25/AN Standard Series AN 00 Over 30dB(A) noise reduction Low back pressure Compact and easy mounting High noise reduction style Series AN 02 Over 35dB(A) noise reduction Case
More informationSeries AN05 to 40 RoHS
ompact Resin Type/Male Thread Series N05 to 40 N 02 05 15 30 40 Thread type M thread Nil R N NPT Thread connection port size pplicable model M5 01 02 03 04 M5 x 0.8 1/8 1/4 3/8 1/2 N05 N N15/ N30 N40 Max.
More information5 Port Solenoid Valve Plug Lead Type
5 Port Solenoid alve Plug Lead Type Series Body Ported Flow rate characteristics For single/double solenoid C [dm 3 /(s bar)]: 0.6 Single Unit alve width: 7.4 mm Possible to drive cylinders: Up to ø32
More informationMechanical Style Pressure Switch. Specifications
or details about certified products conforming to international standards, visit us at www.smcworld.com. Mechanical Style Pressure Switch Series IS1000 Long service life: 5 million cycles IS1000-01 IS1000-01-X202
More informationRelated Products VR4151/4152 Relay Valve
Related Products VR4151/4152 Relay Valve Appropriate output sequences are affected according to the signal received from the machanical valve. Specifications 1 Fluid Air Operating pressure 0 to 1.0MPa
More informationMINIMATIC FITTINGS. Push-Quick Fittings. Quick Connect Fittings. Clippard Instrument Laboratory, Inc. (513)
MINIMATIC FITTINGS Clippard Instrument Laboratory, Inc. (513) 521-4261 www.clippard.com Push-Quick Fittings 325-329 Slip-On Fittings 330-335 Brass Fittings 336-347 Quick Connect Fittings 348-353 Fittings
More informationCompact Rotary Actuator
Compact Rotary ctuator Series Rack & Pinion Style/:,,,, : 17 mm : mm : 29 mm : 33 mm : 37 mm 360 type 360 CR2 CRU2 CR1 MSU CRJ CR1 MSQ MSZ MSQ MRQ Series Variations Standard Made to Order Rotating angle
More informationMetal One-touch Fittings
etal One-touch Fittings Compact and ight pprox. 0% Comparison with KB06-01S Down NEW KB206-01S 1. mm New RoS Conventional model KB06-01S.1 mm pprox. 62% Comparison with KB06-01S ore configuration variations
More informationCode Desc /8. Tecnical Features. Inlet diameter with reductions 1/2-3/8
Filter - regulator - lubricator Three in one tool which combines in a single body for the air filter, regulator and lubricator outlet pressure in line for pneumatic tools. Necessary where there is any
More informationLF 3600 Push-In Fittings Range
LF 300 Push-In Fittings Range Stud Fittings Straights 375 BSPT Page 1-97 301 BSPP/Metric Page 1-97 31 Metric Page 1-97 31 BSPP/Metric Page 1-9 321 BSPT Page 1-9 331 BSPP/Metric Page 1-9 300 Page 1-9 Push-In
More informationHigh Power Cylinder. Series RHC. ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100 REA REB REC C Y C X MQ RHC RZQ. Individual
High Power ylinder Series RH ø, ø, ø, ø, ø, ø3, ø, ø RE RE RE Y X RH D- -X -X High power cylinder: Smooth cushioning for high speed operation (3 low/medium speed operation with heavy loads The capacity
More informationSeries MXS ø6, ø8, ø12, ø16, ø20, ø25
ork table and air cylinder are integrated compactly. ir slide table is ideal for precise assembly. CL Repeatability of work mounting lush mountable auto switches n installed auto switch in the housing
More informationClean Regulator. SRH Series. Contamination controlled stainless steel regulator ARJ
Clean Regulator Series IR IRV VEX SRP ITV IC T AP1 Contamination controlled stainless steel regulator 855 Clean Regulator Series Contamination controlled stainless steel regulator Oil free Outstanding
More informationSteam Valve. Series VND. 2 Port Valve for Steam. With indicator (Option) By adopting of PTFE seal, the valve is suited for steam.
Steam Valve Series VN Valve for Steam Valve for Steam Max. 80 y adopting of PT seal, the valve is suited for steam. ody material: ronze, Stainless steel Large valve capacity With indicator (Option) Selectable
More informationVNA VNB SGC SGH VNC VNH VND VCC
Steam Valve VN Series Valve for Steam Valve for Steam Max. 80 y adopting of PT seal, the valve is suited for steam. ody material: ronze, Stainless steel Large valve capacity With indicator (Option) Selectable
More informationHigh Pressure Coolant Valve
High Pressure Coolant Valve Series.5 MPa, 7.0 MPa Corresponding to high speed grinding and long drilling processes Coolant valve for high pressure coolant liquid (up to.5 MPa or 7.0 MPa) that is ideal
More informationEasier maintenance. ZHP Series. Mounting with the lock plate reduces the pad replacement work steps! Uses an isolated structure. Application Examples
Vacuum ad with Ejector Series ad Diameter: ø63, ø8 Ejector and pad are integrated. Space saving and reduced piping labor! Two-stage ejector More efficient ejector Suction flow rate 1) Compared with SMC
More informationThermoplastic Couplings
Thermoplastic ouplings Thermoplastics -1 Quick oupling Division Thermoplastic ouplings Table of ontents Thermoplastics oupling Selection Guide...-3 Spectrum Series...-4 Specifications...-4 ouplers...-5
More informationTransmitters: Relay Valve VR4151/4152
Relay Valve VR4151/4152 Appropriate output sequences are affected according to the signal received from the mechanical valve. VR4151 VR4152 Precautions Be sure to read before handling. Refer to pages 5-11-2
More informationCompact Rotary Actuator
Compact Rotary ctuator Series Rack & Pinion Style/:,,,, : 17 mm : mm : 29 mm : 33 mm : 37 mm CR2 CRU2 CR1 MSU CRJ Rotation 360 type MSQ 360 MSZ MSQ MRQ Series Variations Page Rotating angle 80 to 0 170
More informationCompact Rotary Actuator
Compact Rotary ctuator CRQ2 Series Rack & Pinion Type/:,,,, : 17 mm : mm : 29 mm : 33 mm : 37 mm CR 2 CR1 MSU CRJ CR1 CRQ2 MSQ MSZ Rotation 360 type 360 CRQ2 MSQ MRQ Series Variations Page Rotating angle
More informationPressure measurements can easily be taken any time, anywhere. POWER LIGHT
Compact Manometer Pressure measurements can easily be taken any time, anywhere. RoHS Compact and lightweight Portable type with a lightweight of only about 00 g (unit 50 g, battery 50 g) can also be held
More information