Metal One-touch Fittings

Transcription

1 etal One-touch Fittings Compact and ight pprox. 0% Comparison with KB06-01S Down NEW KB206-01S 1. mm New RoS Conventional model KB06-01S.1 mm pprox. 62% Comparison with KB06-01S ore configuration variations models models Down.2 g g Fluid temperature pplicable tube material to 10 C, R, Rc, UNF, NPT, G FEP PF Nylon Soft nylon Polyurethane Polyolefin Electroless nickel plated (Brass parts) Grease-free Variations dded size pplicable ø ø ø R G R G R G R G No -2 UNF NPT NPT NPT NPT No pplicable ø'' ø/2'' ø'' ø/'' ø'' ø'' Series KB2 CT.EUS0--UK

2 etal One-touch Fittings Series KB2 Compact and light : pprox. 0% down Comparison with KB06-01S : pprox. 62% down Comparison with KB06-01S NEW KB206-01S 1. mm Conventional model KB06-01S.1 mm ore tube sizes added ø (ø1.") and have been added. ore configuration variations models models size x UNF/NPT, etric size x G added pplicable tube size ø to, ø" to ø".2 g g pplicable tube material FEP PF Nylon Soft nylon Polyurethane Polyolefin Electroless nickel plated (Brass parts) Stainless steel 0 Stainless steel :, R, Rc, UNF, NPT, G Fluid temperature: to 10 C Grease-free ale connector Brass Special FK ale elbow Features 1

3 etal One-touch Fittings Series KB2 Variations ale Connector KB2 Bulkhead Union KB2E Different Diameter Union Y KB2U etric R G P. P. etric P. P. etric P. 6 P. 1 P. exagon Socket ead ale Connector KB2S Union Tee KB2T Bulkhead Connector KB2E etric R G P. P. P. etric P. P. etric Rc G P. 7 P. 1 P. 1 Straight Union KB2 Union Y KB2U Extended ale Elbow KB2W etric P. P. etric P. P. etric R G P. 7 P. 1 P. 1 ale Elbow KB2 Different Diameter Tee KB2T etric R G P. P. P. etric P. 6 P. Female Connector etric Rc G KB2F P. P. 1 ale Branch Tee KB2T Plug-in Reducer KB2R P. etric R G P. P. P. etric P. 6 P. Plug etric KB2P P. P. Union Elbow KB2 Different Diameter Straight KB2 etric P. etric P. 6 P. 1 1

4 etal One-touch Fittings pplicable Tube: etric Size, Thread:, R, Rc Series KB2 RoS pplicable Tube Tube material Tube O.D. FEP, PF, Nylon, Soft nylon, Polyurethane, Polyolefin ø,,, ø,, ø, Specifications Fluid Operating pressure range Proof pressure mbient and fluid temperature Note ) ubricant Seal on the s ir, Water 0 kpa to 1 Pa Note ).0 Pa to 10 C (No freezing) Note ) Grease-free specification With sealant For soft nylon tube, water cannot be used. void using in a vacuum holding application such as a leak tester, since there is leakage. Note ) Check the operating pressure range and operating temperature range of the tube. Note ) It is recommended that you use the inner sleeve in the following conditions (Except ø): When using in an environment where the fluid temperature changes drastically. When using at a high temperature. Spare Parts Description Gasket Bulkhead nut Tube O.D. ø ø ø Part no. -G KB-P01 KB206-P01 KB20-P01 KB2-P01 KB2-P01 KB2-P01 aterial Stainless steel, Special FK C60 (Electroless nickel plated) Temperature Condition of ounting the Inner Sleeve Tube FEP tube/t series PF tube/t series Temperature 0 C or more 0 C or more Cross Reference Table of the Inner Sleeve Tube material Tube O.D. TUS T/TI T/TI (Soft polyurethane) (FEP) (PF) T002 TUS02 T02 T00 TUS060 T060 T060 ø TUS00 T006 T006 TUS6 T7 T0 T0 TUS0 ø T0 T T C00 + Electroless nickel plated is used for the TJ series. pplicable inner sleeve Part no. TJ-002 TJ-02 TJ-00 TJ-060 TJ-00 TJ-006 TJ-6 TJ-7 TJ-0 TJ-0 TJ-0 TJ- ength Construction ale connector q w e r u i o t y ale elbow t r e w q Component Parts No Description Release button Guide 1 Guide 2 Chuck Seal ale connector body ale elbow body O-ring Stud aterial Stainless steel 0 Stainless steel 0 Stainless steel 0 Stainless steel 0 Special FK (Fluoro coated) C60 (Electroless nickel plated) Stainless steel Special FK (Fluoro coated) C60 (Electroless nickel plated) 2

5 etal One-touch Fittings Series KB2 pplicable Tube: etric Size, Thread:, R, Rc ale Connector: KB2 pplicable ø ø ø R, odel KB22- KB22-01S KB22-02S KB20- KB20-01S KB20-02S KB206- KB206-01S KB206-02S KB206-0S KB20-01S KB20-02S KB20-0S KB2-01S KB2-02S KB2-0S KB2-0S KB2-02S KB2-0S KB2-0S KB2-0S KB2-0S exagon Socket ead ale Connector: KB2S pplicable ø ø ø Straight Union: KB2 R, pplicable ø ø ø odel KB2S2- KB2S0- KB2S0-01S KB2S06- KB2S06-01S KB2S06-02S KB2S0-01S KB2S0-02S KB2S0-0S KB2S-01S KB2S-02S KB2S-0S KB2S-0S KB2S-02S KB2S-0S KB2S-0S KB2S-0S KB2S-0S odel KB22-00 KB20-00 KB KB20-00 KB2-00 KB2-00 KB Reference dimensions after installation of R is maximum diameter. Value of FEP tube. Value of nylon tube for only Reference dimensions after installation of R is maximum diameter. Value of FEP tube. Value of nylon tube for only is maximum diameter. Value of FEP tube. Value of nylon tube for only () (R) () (R) pplicable tube pplicable tube (with sealant) pplicable tube 2 x pplicable tube pplicable tube (with sealant)

6 Series KB2 pplicable Tube: etric Size, Thread:, R, Rc ale Elbow: KB2 pplicable R, ø ø ø odel KB22- KB22-01S KB22-02S KB20- KB20-01S KB20-02S KB206- KB206-01S KB206-02S KB206-0S KB20-01S KB20-02S KB20-0S KB2-01S KB2-02S KB2-0S KB2-0S KB2-02S KB2-0S KB2-0S KB2-0S KB2-0S Reference dimensions after installation of R is maximum diameter. Value of FEP tube. Value of nylon tube for only. () (R) 2 2 pplicable tube 1 pplicable tube 1 (with sealant) ale Branch Tee: KB2T pplicable ø ø ø R, odel KB2T2- KB2T2-01S KB2T2-02S KB2T0- KB2T0-01S KB2T0-02S KB2T06- KB2T06-01S KB2T06-02S KB2T06-0S KB2T0-01S KB2T0-02S KB2T0-0S KB2T-01S KB2T-02S KB2T-0S KB2T-0S KB2T-02S KB2T-0S KB2T-0S KB2T-0S KB2T-0S Reference dimensions after installation of R is maximum diameter. Value of FEP tube. Value of nylon tube for only. () 2 (R) 2 2 x pplicable tube x pplicable tube 1 (with sealant)

7 etal One-touch Fittings Series KB2 pplicable Tube: etric Size, Thread:, R, Rc Union Elbow: KB2 pplicable ø ø ø odel KB22-00 KB20-00 KB KB20-00 KB2-00 KB2-00 KB is maximum diameter. Value of FEP tube. Value of nylon tube for only. 2 x pplicable tube Bulkhead Union: KB2E pplicable ø ø ø odel KB2E2-00 KB2E0-00 KB2E06-00 KB2E0-00 KB2E-00 KB2E-00 KB2E-00 T () x 1 x 1 x 1 1 x 1 1 x 1 20 x 1 x ounting hole Note) Value of FEP tube. Value of nylon tube for only. ounting plate 2 x pplicable tube thickness 7 mm or smaller T Union Tee: KB2T pplicable ø ø ø odel KB2T2-00 KB2T0-00 KB2T06-00 KB2T0-00 KB2T-00 KB2T-00 KB2T is maximum diameter. Value of FEP tube. Value of nylon tube for only. x pplicable tube Union Y : KB2U pplicable ø ø ø odel KB2U2-00 KB2U0-00 KB2U06-00 KB2U0-00 KB2U-00 KB2U-00 KB2U W P is maximum diameter. Value of FEP tube. Value of nylon tube for only. 1 2 x pplicable tube W P

8 Series KB2 pplicable Tube: etric Size, Thread:, R, Rc Different Diameter Tee: KB2T pplicable a ø ø ø b ø ø odel KB2T2-0 KB2T0-06 KB2T06-0 KB2T0- KB2T- KB2T , 2 are maximum diameters. Value of FEP tube. 2 x pplicable tube a pplicable 1 tube b Plug-in Reducer: KB2R pplicable ø ø ø pplicable fitting size ø ø odel KB2R2-0 KB2R0-06 KB2R06-0 KB2R0- KB2R- KB2R is maximum diameter. Value of FEP tube pplicable tube pplicable fitting size Different Diameter Straight: KB2 pplicable a ø ø ø b ø ø odel KB22-0 KB20-06 KB206-0 KB20- KB2- KB is maximum diameter. Value of FEP tube pplicable tube b pplicable tube a 1 2 Different Diameter Union Y : KB2U pplicable a ø ø ø b ø ø odel KB2U2-0 KB2U0-06 KB2U06-0 KB2U0- KB2U- KB2U P W is maximum diameter. Value of FEP tube x pplicable tube a W P 2 pplicable tube b 6

9 etal One-touch Fittings Series KB2 pplicable Tube: etric Size, Thread:, R, Rc Bulkhead Connector: KB2E pplicable ø ø ø Rc odel KB2E2-02 KB2E0-01 KB2E0-02 KB2E06-01 KB2E06-02 KB2E06-0 KB2E0-01 KB2E0-02 KB2E0-0 KB2E-02 KB2E-0 KB2E-0 KB2E-0 KB2E-0 KB2E-0 T () x 1 x 1 x 1 1 x 1 1 x 1 20 x 1 x 1 Width across flat ounting hole Note) Note) Value of FEP tube. Value of nylon tube for only ounting plate thickness 7 mm or smaller pplicable tube 2 T 1 Extended ale Elbow: KB2W pplicable ø ø ø R, odel KB2W2- KB2W2-01S KB2W2-02S KB2W0- KB2W0-01S KB2W0-02S KB2W06- KB2W06-01S KB2W06-02S KB2W06-0S KB2W0-01S KB2W0-02S KB2W0-0S KB2W-02S KB2W-0S KB2W-0S KB2W-02S KB2W-0S KB2W-0S KB2W-0S KB2W-0S Reference dimensions after installation of R is maximum diameter. Value of FEP tube. Value of nylon tube for only. () (R) 2 2 pplicable tube 1 pplicable tube 1 (with sealant) 7

10 Series KB2 pplicable Tube: etric Size, Thread:, R, Rc Female Connector: KB2F pplicable ø ø ø Rc odel KB2F2-01 KB2F0-01 KB2F0-02 KB2F06-01 KB2F06-02 KB2F06-0 KB2F0-01 KB2F0-02 KB2F0-0 KB2F-02 KB2F-0 KB2F-02 KB2F-0 KB2F-0 KB2F-0 KB2F is maximum diameter. Value of FEP tube. Value of nylon tube for only. 2 pplicable tube 1 Plug: KB2P pplicable fitting size ø ø ø odel KB2P-2 KB2P-0 KB2P-06 KB2P-0 KB2P- KB2P- KB2P pplicable fitting size

11 etal One-touch Fittings pplicable Tube: Size, Thread: UNF, NPT Series KB2 RoS pplicable Tube Tube material Tube O.D. FEP, PF, Nylon, Soft nylon, Polyurethane, Polyolefin ø",, ø", ø/", ø", ø" Specifications Fluid Operating pressure range Proof pressure mbient and fluid temperature Note ) ubricant Seal on the s ir, Water 0 kpa to 1 Pa Note ).0 Pa to 10 C (No freezing) Note ) Grease-free specification With sealant For soft nylon tube, water cannot be used. void using in a vacuum holding application such as a leak tester, since there is leakage. Note ) Check the operating pressure range and operating temperature range of the tube. Note ) It is recommended that you use the inner sleeve in the following conditions (Except ø"): When using in an environment where the fluid temperature changes drastically. When using at a high temperature. Spare Parts Description Gasket Bulkhead nut Tube O.D. ø" ø" ø/" ø" ø" Part no. -G KB201-P01 KB207-P01 KB20-P01 KB1-P01 KB-P01 aterial Stainless steel, Special FK C60 (Electroless nickel plated) Temperature Condition of ounting the Inner Sleeve Tube FEP tube/t series PF tube/t series Temperature 0 C or more 0 C or more Cross Reference Table of the Inner Sleeve Tube material Tube O.D. T/TI T/TI (FEP) (PF) T002 T02 T00 ø" TIB07 TI07 TI07 ø/" T006 T006 ø" TIB TI TI ø" TI1 TI1 C00 + Electroless nickel plated is used for the TJ series. pplicable inner sleeve Part no. TJ-002 TJ-02 TJ-00 TJ-060 TJ-076 TJ-006 TJ-6 TJ-17 TJ-1 ength Construction ale connector q w e r u i o t y ale elbow t r e w q Component Parts No Description Release button Guide 1 Guide 2 Chuck Seal ale connector body ale elbow body O-ring Stud aterial Stainless steel 0 Stainless steel 0 Stainless steel 0 Stainless steel 0 Special FK (Fluoro coated) C60 (Electroless nickel plated) Stainless steel Special FK (Fluoro coated) C60 (Electroless nickel plated)

12 Series KB2 pplicable Tube: Size, Thread: UNF, NPT ale Connector: KB2 pplicable ø" ø" ø/" ø" ø" UNF, NPT -2UNF -2UNF -2UNF odel KB201-2 KB201-N01S KB201-N02S KB20-2 KB20-N01S KB20-N02S KB207-2 KB207-N01S KB207-N02S KB207-N0S KB20-N01S KB20-N02S KB20-N0S KB1-N01S KB1-N02S KB1-N0S KB1-N0S KB-N02S KB-N0S KB-N0S Reference dimensions after installation of NPT is maximum diameter. Value of FEP tube. (-2UNF) (NPT) pplicable tube pplicable tube (with sealant) exagon Socket ead ale Connector: KB2S pplicable ø" ø" ø/" ø" ø" UNF, NPT -2UNF -2UNF -2UNF odel KB2S01-2 KB2S0-2 KB2S0-N01S KB2S07-2 KB2S07-N01S KB2S07-N02S KB2S07-N0S KB2S0-N01S KB2S0-N02S KB2S0-N0S KB2S-N01S KB2S-N02S KB2S-N0S KB2S-N0S KB2S1-N02S KB2S1-N0S KB2S1-N0S Reference dimensions after installation of NPT is maximum diameter. Value of FEP tube. (-2UNF) (NPT) pplicable tube pplicable tube (with sealant) Straight Union: KB2 pplicable tube O.D. ø" ø" ø/" ø" ø" odel KB KB20-00 KB KB20-00 KB1-00 KB is maximum diameter. Value of FEP tube x pplicable tube

13 etal One-touch Fittings Series KB2 pplicable Tube: Size, Thread: UNF, NPT ale Elbow: KB2 pplicable ø" ø" ø/" ø" ø" UNF, NPT -2UNF -2UNF -2UNF odel KB201-2 KB201-N01S KB201-N02S KB20-2 KB20-N01S KB20-N02S KB207-2 KB207-N01S KB207-N02S KB207-N0S KB20-N01S KB20-N02S KB20-N0S KB1-N01S KB1-N02S KB1-N0S KB1-N0S KB-N02S KB-N0S KB-N0S Reference dimensions after installation of NPT is maximum diameter. Value of FEP tube. (-2UNF) pplicable tube 2 2 (NPT) 1 pplicable tube 1 (with sealant) ale Branch Tee: KB2T pplicable ø" ø" ø/" ø" ø" UNF, NPT -2UNF -2UNF -2UNF odel KB2T01-2 KB2T01-N01S KB2T01-N02S KB2T0-2 KB2T0-N01S KB2T0-N02S KB2T07-2 KB2T07-N01S KB2T07-N02S KB2T07-N0S KB2T0-N01S KB2T0-N02S KB2T0-N0S KB2T-N01S KB2T-N02S KB2T-N0S KB2T-N0S KB2T1-N02S KB2T1-N0S KB2T1-N0S Reference dimensions after installation of NPT is maximum diameter. Value of FEP tube. (-2UNF) 2 x pplicable tube 2 2 (NPT) x pplicable tube 1 (with sealant) Union Elbow: KB2 pplicable ø" ø" ø/" ø" ø" odel KB KB20-00 KB KB20-00 KB1-00 KB is maximum diameter. Value of FEP tube x pplicable tube

14 Series KB2 pplicable Tube: Size, Thread: UNF, NPT Bulkhead Union: KB2E pplicable ø" ø" ø/" ø" ø" odel KB2E01-00 KB2E0-00 KB2E07-00 KB2E0-00 KB2E-00 KB2E1-00 T (UNF) 7/-20UNF 7/-20UNF -20UNF /-1UNF /-UNF 7/-UNF ounting hole Note) Value of FEP tube ounting plate thickness 2 x pplicable tube 7 mm or smaller T Union Tee: KB2T pplicable ø" ø" ø/" ø" ø" odel KB2T01-00 KB2T0-00 KB2T07-00 KB2T0-00 KB2T-00 KB2T is maximum diameter. Value of FEP tube x pplicable tube Union Y : KB2U pplicable ø" ø" ø/" ø" ø" odel KB2U01-00 KB2U0-00 KB2U07-00 KB2U0-00 KB2U-00 KB2U W P is maximum diameter. Value of FEP tube x pplicable tube W P Different Diameter Tee: KB2T pplicable Plug-in Reducer: KB2R a ø" ø" ø/" ø" b ø" ø/" ø" ø" pplicable ø" ø" ø/" ø" odel KB2T01-0 KB2T0-07 KB2T07-0 KB2T0- KB2T-1 pplicable fitting size ø" ø/" ø" ø" odel KB2R01-0 KB2R0-07 KB2R07-0 KB2R0- KB2R is maximum diameter. Value of FEP tube , 2 are maximum diameters. Value of FEP tube pplicable tube b x pplicable tube a pplicable tube pplicable fitting size 2

15 etal One-touch Fittings Series KB2 pplicable Tube: Size, Thread: UNF, NPT Different Diameter Straight: KB2 pplicable a b ø" ø" ø/" ø" ø" ø/" ø" ø" odel KB201-0 KB20-07 KB207-0 KB20- KB is maximum diameter. Value of FEP tube pplicable tube b pplicable tube a 1 2 Different Diameter Union Y : KB2U pplicable a ø" ø" ø/" ø" b ø" ø/" ø" ø" odel KB2U01-0 KB2U0-07 KB2U07-0 KB2U0- KB2U-1 Bulkhead Connector: KB2E pplicable ø" ø" ø/" ø" ø" NPT odel.7.6 KB2E01-N02 KB2E0-N02 KB2E07-N02 KB2E0-N0 KB2E-N0 KB2E1-N0 KB2E1-N T (UNF) 7/-20UNF 7/-20UNF -20UNF /-1UNF /-UNF 7/-UNF P W is maximum diameter. Value of FEP tube. Width across flat Note) Value of FEP tube. ounting hole Note) x pplicable tube a W P 2 2 pplicable tube b ounting plate thickness 7 mm or smaller pplicable tube 2 T 1 Extended ale Elbow: KB2W pplicable ø" ø" ø/" ø" ø" NPT odel KB2W01-N01S KB2W01-N02S KB2W0-N01S KB2W0-N02S KB2W07-N01S KB2W07-N02S KB2W07-N0S KB2W0-N01S KB2W0-N02S KB2W0-N0S KB2W-N02S KB2W-N0S KB2W-N0S KB2W1-N02S KB2W1-N0S KB2W1-N0S Reference dimensions after installation of NPT is maximum diameter. Value of FEP tube. 2 pplicable tube 1 (with sealant) 1

16 Series KB2 pplicable Tube: Size, Thread: UNF, NPT Female Connector: KB2F pplicable ø" ø" ø/" ø" ø" NPT odel KB2F01-N01 KB2F01-N02 KB2F0-N01 KB2F0-N02 KB2F07-N01 KB2F07-N02 KB2F07-N0 KB2F0-N01 KB2F0-N02 KB2F0-N0 KB2F-N02 KB2F-N0 KB2F-N0 KB2F1-N0 KB2F1-N is maximum diameter. Value of FEP tube. pplicable tube 2 1 Plug: KB2P pplicable fitting size ø" ø" ø/" ø" ø" odel KB2P-01 KB2P-0 KB2P-07 KB2P-0 KB2P- KB2P pplicable fitting size

17 etal One-touch Fittings pplicable Tube: etric Size, Thread: G Series KB2 RoS pplicable Tube Tube material Tube O.D. FEP, PF, Nylon, Soft nylon, Polyurethane, Polyolefin,, ø,, ø, Specifications Fluid Operating pressure range Proof pressure mbient and fluid temperature Note ) ubricant Seal on the s ir, Water 0 kpa to 1 Pa Note ).0 Pa to 10 C (No freezing) Note ) Grease-free specification With sealant For soft nylon tube, water cannot be used. void using in a vacuum holding application such as a leak tester, since there is leakage. Note ) Check the operating pressure range and operating temperature range of the tube. Note ) It is recommended that you use the inner sleeve in the following conditions: When using in an environment where the fluid temperature changes drastically. When using at a high temperature. Spare Parts Description Bulkhead nut Description G O-ring Tube O.D. ø ø Thread size G G G G Part no. KB-P01 KB206-P01 KB20-P01 KB2-P01 KB2-P01 KB2-P01 Part no. KB2-G01 KB2-G02 KB2-G0 KB2-G0 aterial C60 (Electroless nickel plated) aterial Special FK (Fluoro coated) Temperature Condition of ounting the Inner Sleeve Tube FEP tube/t series PF tube/t series Temperature 0 C or more 0 C or more Cross Reference Table of the Inner Sleeve Tube material Tube O.D. TUS T/TI T/TI (Soft polyurethane) (FEP) (PF) T002 TUS02 T02 T00 TUS060 T060 T060 ø TUS00 T006 T006 TUS6 T7 T0 T0 TUS0 ø T0 T T C00 + Electroless nickel plated is used for the TJ series. pplicable inner sleeve Part no. TJ-002 TJ-02 TJ-00 TJ-060 TJ-00 TJ-006 TJ-6 TJ-7 TJ-0 TJ-0 TJ-0 TJ- ength Construction ale connector q w e r u i o t!0 y ale elbow t!0 r e w q Component Parts No Description Release button Guide 1 Guide 2 Chuck Seal ale connector body ale elbow body O-ring Stud G O-ring aterial Stainless steel 0 Stainless steel 0 Stainless steel 0 Stainless steel 0 Special FK (Fluoro coated) C60 (Electroless nickel plated) Stainless steel Special FK (Fluoro coated) C60 (Electroless nickel plated) Special FK (Fluoro coated) 1

18 Series KB2 pplicable Tube: etric Size, Thread: G ale Connector: KB2 pplicable ø ø G odel KB20-G01 KB20-G02 KB206-G01 KB206-G02 KB206-G0 KB20-G01 KB20-G02 KB20-G0 KB2-G01 KB2-G02 KB2-G0 KB2-G0 KB2-G02 KB2-G0 KB2-G0 KB2-G0 KB2-G is maximum diameter. Value of FEP tube. Value of nylon tube for only. pplicable tube (Sealing face) exagon Socket ead ale Connector: KB2S pplicable ø ø G odel KB2S0-G01 KB2S06-G01 KB2S06-G02 KB2S0-G01 KB2S0-G02 KB2S0-G0 KB2S-G01 KB2S-G02 KB2S-G0 KB2S-G0 KB2S-G02 KB2S-G0 KB2S-G0 KB2S-G0 KB2S-G is maximum diameter. Value of FEP tube. Value of nylon tube for only. pplicable tube (Sealing face)

19 etal One-touch Fittings Series KB2 pplicable Tube: etric Size, Thread: G ale Elbow: KB2 pplicable ø ø G odel KB20-G01 KB20-G02 KB206-G01 KB206-G02 KB206-G0 KB20-G01 KB20-G02 KB20-G0 KB2-G01 KB2-G02 KB2-G0 KB2-G0 KB2-G02 KB2-G0 KB2-G0 KB2-G0 KB2-G is maximum diameter. Value of FEP tube. Value of nylon tube for only. 2 pplicable tube 1 (Sealing face) ale Branch Tee: KB2T pplicable ø ø G odel KB2T0-G01 KB2T0-G02 KB2T06-G01 KB2T06-G02 KB2T06-G0 KB2T0-G01 KB2T0-G02 KB2T0-G0 KB2T-G01 KB2T-G02 KB2T-G0 KB2T-G0 KB2T-G02 KB2T-G0 KB2T-G0 KB2T-G0 KB2T-G is maximum diameter. Value of FEP tube. Value of nylon tube for only. 2 2 x pplicable tube 1 1 (Sealing face)

20 Series KB2 pplicable Tube: etric Size, Thread: G Bulkhead Connector: KB2E pplicable G ø ø odel KB2E0-G01 KB2E0-G02 KB2E06-G01 KB2E06-G02 KB2E06-G0 KB2E0-G01 KB2E0-G02 KB2E0-G0 KB2E-G02 KB2E-G0 KB2E-G0 KB2E-G0 KB2E-G0 KB2E-G0 Width across flat T () 1 2 x 1 x 1 1 x 1 1 x 1 20 x 1 x ounting hole Note) Note) Value of FEP tube. Value of nylon tube for only ounting plate thickness 7 mm or smaller 1 2 T pplicable tube Extended ale Union: KB2W pplicable G ø ø Female Connector: KB2F 1 pplicable G ø ø odel KB2W0-G01 KB2W0-G02 KB2W06-G01 KB2W06-G02 KB2W06-G0 KB2W0-G01 KB2W0-G02 KB2W0-G0 KB2W-G02 KB2W-G0 KB2W-G0 KB2W-G02 KB2W-G0 KB2W-G0 KB2W-G0 KB2W-G0 odel KB2F0-G01 KB2F0-G02 KB2F06-G01 KB2F06-G02 KB2F06-G0 KB2F0-G01 KB2F0-G02 KB2F0-G0 KB2F-G02 KB2F-G0 KB2F-G02 KB2F-G0 KB2F-G0 KB2F-G0 KB2F-G is maximum diameter. Value of FEP tube. Value of nylon tube for only is maximum diameter. Value of FEP tube. Value of nylon tube for only pplicable tube 1 (Sealing face) 1 pplicable tube

21 Series KB2 Specific Product Precautions Be sure to read before handling. Refer to back cover for Safety Instructions, andling Precautions for SC Products (-E0-) for Fittings and Tubing Precautions. Caution Selection 1. The surge pressure must be under the maximum operating pressure. If the surge pressure exceeds the maximum operating pressure, it will result in damage to fittings and tubes or the tube may result in being fallen out. 2. If using a fluororesin tube in an environment where the fluid temperature changes drastically, it is recommended to use an inner sleeve. Otherwise, air leakage may occur or the tube may release from fitting due to deformation of the tube.. The particle generation of the KB2 series depends on the operating conditions and operating environment. If you are concerned about the effects on machinery and equipment, check the particle generation with your machine before use. The components of the KB2 series may slide due to changes in the internal pressure, which may generate particles. When using male elbow, male branch tee, and extended male elbow fittings, particles may be generated by rotation for positioning after connecting. Caution G Thread Fittings 1. The standard torques of the fittings are as shown in the below table. size G G G G Proper tightening torque N m 2. to.7 to 6.. to.. to 1. Caution ounting 1. The union elbow, union tee, union Y, different diameter tee, and different diameter union Y fittings should be fixed through the mounting hole. Otherwise, air leakage or breaking can occur due to a pulling force or moment load created by the product's weight. 2. The male elbow, male branch tee, and extended male elbow fittings can be rotated for positioning, but they cannot be used rotating. This will cause metal debris by wearing, which may enter the operating fluid or cause fitting damage.. Keep the connection part of fittings and tubes from rotating or oscillating movement. Installation and Removal of Tube Caution 1. Installation of tube 1) Grease is not used for the KB2 series, therefore a greater insertion force is required when the tube is installed. In particular, polyurethane tube may fold when inserted due to its softness. old the end of the tube, and insert it all the way in slowly and securely. Refer to dimension in the dimension drawings for guidance on the insertion depth of tube. 2. Removal of tube 1) For tube used at a high temperature or for an extended period of time, there is a possibility that it will not fit into a one-touch fitting again due to an enlarged O.D. Dispose of the tube and replace it with a new one.

22

23

24 Safety Instructions Caution: Warning: Danger : Caution indicates a hazard with a low level of risk which, if not avoided, could result in minor or moderate injury. Warning indicates a hazard with a medium level of risk which, if not avoided, could result in death or serious injury. Danger indicates a hazard with a high level of risk which, if not avoided, will result in death or serious injury. These safety instructions are intended to prevent hazardous situations and/or equipment damage. These instructions indicate the level of potential hazard with the labels of Caution, Warning or Danger. They are all important notes for safety and must be followed in addition to International Standards (ISO/IEC) 1), and other safety regulations. 1) ISO : Pneumatic fluid power General rules relating to systems. ISO 1: ydraulic fluid power General rules relating to systems. IEC : Safety of machinery Electrical equipment of machines. (Part 1: General requirements) ISO -1: anipulating industrial robots - Safety. etc. Warning 1. The compatibility of the product is the responsibility of the person who designs the equipment or decides its specifications. Since the product specified here is used under various operating conditions, its compatibility with specific equipment must be decided by the person who designs the equipment or decides its specifications based on necessary analysis and test results. The expected performance and safety assurance of the equipment will be the responsibility of the person who has determined its compatibility with the product. This person should also continuously review all specifications of the product referring to its latest catalogue information, with a view to giving due consideration to any possibility of equipment failure when configuring the equipment. 2. Only personnel with appropriate training should operate machinery and equipment. The product specified here may become unsafe if handled incorrectly. The assembly, operation and maintenance of machines or equipment including our products must be performed by an operator who is appropriately trained and experienced.. Do not service or attempt to remove product and machinery/equipment until safety is confirmed. 1. The inspection and maintenance of machinery/equipment should only be performed after measures to prevent falling or runaway of the driven objects have been confirmed. 2. When the product is to be removed, confirm that the safety measures as mentioned above are implemented and the power from any appropriate source is cut, and read and understand the specific product precautions of all relevant products carefully.. Before machinery/equipment is restarted, take measures to prevent unexpected operation and malfunction.. Contact SC beforehand and take special consideration of safety measures if the product is to be used in any of the following conditions. 1. Conditions and environments outside of the given specifications, or use outdoors or in a place exposed to direct sunlight. 2. Installation on equipment in conjunction with atomic energy, railways, air navigation, space, shipping, vehicles, military, medical treatment, combustion and recreation, or equipment in contact with food and beverages, emergency stop circuits, clutch and brake circuits in press applications, safety equipment or other applications unsuitable for the standard specifications described in the product catalogue.. n application which could have negative effects on people, property, or animals requiring special safety analysis.. Use in an interlock circuit, which requires the provision of double interlock for possible failure by using a mechanical protective function, and periodical checks to confirm proper operation. Caution 1. The product is provided for use in manufacturing industries. The product herein described is basically provided for peaceful use in manufacturing industries. If considering using the product in other industries, consult SC beforehand and exchange specifications or a contract if necessary. If anything is unclear, contact your nearest sales branch. imited warranty and Disclaimer/ Compliance Requirements The product used is subject to the following imited warranty and Disclaimer and Compliance Requirements. Read and accept them before using the product. imited warranty and Disclaimer 1. The warranty period of the product is 1 year in service or 1. years after the product is delivered. 2) lso, the product may have specified durability, running distance or replacement parts. Please consult your nearest sales branch. 2. For any failure or damage reported within the warranty period which is clearly our responsibility, a replacement product or necessary parts will be provided. This limited warranty applies only to our product independently, and not to any other damage incurred due to the failure of the product.. Prior to using SC products, please read and understand the warranty terms and disclaimers noted in the specified catalogue for the particular products. 2) Vacuum pads are excluded from this 1 year warranty. vacuum pad is a consumable part, so it is warranted for a year after it is delivered. lso, even within the warranty period, the wear of a product due to the use of the vacuum pad or failure due to the deterioration of rubber material are not covered by the limited warranty. Compliance Requirements 1. The use of SC products with production equipment for the manufacture of weapons of mass destruction (WD) or any other weapon is strictly prohibited. 2. The exports of SC products or technology from one country to another are governed by the relevant security laws and regulations of the countries involved in the transaction. Prior to the shipment of a SC product to another country, assure that all local rules governing that export are known and followed. Safety Instructions Be sure to read andling Precautions for SC Products (-E0-) before using. SC Corporation (Europe) ustria office@smc.at Belgium +2 (0)6 info@smcpneumatics.be Bulgaria office@smc.bg Croatia office@smc.hr Czech Republic office@smc.cz Denmark smc@smcdk.com Estonia smc@smcpneumatics.ee Finland smcfi@smc.fi France + (0) contact@smc-france.fr Germany + (0) info@smc-pneumatik.de Greece sales@smchellas.gr ungary office@smc.hu Ireland + (0) sales@smcpneumatics.ie Italy + (0)2 mailbox@smcitalia.it atvia info@smclv.lv ithuania info@smclt.lt Netherlands +1 (0)201 info@smcpneumatics.nl Norway post@smc-norge.no Poland office@smc.pl Portugal postpt@smc.smces.es Romania smcromania@smcromania.ro Russia info@smc-pneumatik.ru Slovakia office@smc.sk Slovenia office@smc.si Spain post@smc.smces.es Sweden +6 (0) post@smcpneumatics.se Switzerland +1 (0)26 info@smc.ch Turkey +0 (0) smc@entek.com.tr UK + (0) sales@smcpneumatics.co.uk SC CORPORTION kihabara UDX 1F, --1, Sotokanda, Chiyoda-ku, Tokyo 1-00, JPN Phone: FX: st printing OW printing OW 00 Printed in Spain Specifications are subject to change without prior notice and any obligation on the part of the manufacturer.