H/DL/L/LL Series. Tube. Union nut. Flared I.D. Flared I.D. can prevent the tube from deforming inwards. Specifications
|
|
- Denis Manning
- 6 years ago
- Views:
Transcription
1 Flared ridge ferrule Prevents accidental loss of ferrule when inserting into the fitting body. Hardened ridge ferrule Prevents breakage of ferrule when tightening nut. Flared I.D. Provides low flow resistance inside the fitting. Wide variety of types and sizes Ten types and five tube O.D s provide a wide range of fittings that will fit any application. ade to Order Symbol Specifications X2 to non-copper type (With electroless nickel plated) Add -X2 at the end of the model number. Ex.) H0-01-X2 Self-align Fittings H/D// Series Union nut Flared I.D. Tube Flared I.D. can prevent the tube from deforming inwards. Specifications material aximum operating pressure Proof pressure Fluid ounting section Thread Nut section Seal on the s (1) Principal Parts aterial arge holding force by metallic type for use on soft copper steel pipe (Not available for urethane ) Tube support Tube sliding prevented during installation. The tube support mechanism gives a strong feeling when inserting tube, and prevents tube from sliding when screwing in the tube. Body Nylon, Soft nylon, Soft copper steel pipe (C1220T-0) ø,, ø8, ø10, ø12 1 Pa 10 Pa Air JIS B 0203 (Taper for piping) JIS B 0205 (etric fine ) None or with sealant Note 1) ale elbow, ale branch tee, ale run tee with sealant is manufactured upon receipt of order. Suffix S to the end of part number if w/ sealant is desired. Body Nut C360, C3771BE C360 C2700 RoHS KQ2 KQB2 KS KX K KF H/D / KC KK KK130 D KD KB KR KA KQG2 KG KFG2 S KKA KP Q QR T IDK 201
2 H/D// Series odel ale connector H Use to pipe in the same direction from female. ost general type. ale run tee DY P. 20 Use to branch line in the same direction from female and in 90 direction. ale elbow D Use to pipe at right angles to female. ost general type. Bulkhead union DE P. 20 Use to connect tubes through a panel. Union tee DT Use to connect tubes in both 90 directions. Bulkhead connector DEF P. 20 Use to connect male thead and tube through a panel. Female connector DHF Use to pipe from male such as pressure gauge. Plug DP P. 205 Use to plug unused fittings. ale branch tee DT P. 20 Use to branch line from female in both 90 directions. Swivel elbow Use to pipe at right angles to female. Swiveled at any direction. P. 205 Swivel extended elbow Use to pipe at right angles to female. Swiveled at any direction. Solid piece moves fittings up from workpiece. P
3 Self-align Fittings H/D// Series ale Connector: H ale Elbow: D Union Tee: DT Female Connector: DHF s odel R H H H06-01 H H H H H odel D D D D D D D D D D D D D D odel DT DT DT DT DT s R s Rc odel DHF DHF DHF DHF DHF DHF x appliction KQ2 KQB2 KS KX K KF H/D / KC KK KK130 D KD KB KR KA KQG2 KG KFG2 S KKA KP Q QR T IDK 203
4 H/D// Series ale Branch Tee: DT s R 6 odel DT DT DT DT DT DT DT DT DT DT DT DT DT DT x applicable ale Run Tee: DY s R 6 odel DY DY DY DY DY DY DY DY DY DY DY DY DY DY x applicable Bulkhead Union: DE odel Bulkhead Connector: DEF DE max DE max. 3 8 DE max DE max DE max. 112 s Rc odel 6 DEF max. 8 8 DEF max DEF max DEF max. 10 H3 ounting ounting plate hole thickness ounting ounting plate hole thickness ounting plate thickness 2 x applicable ounting plate thickness 20
5 Self-align Fittings H/D// Series Plug: DP fitting odel ød DP-0 DP DP DP DP KQ2 KQB2 Swivel Elbow: R odel H3 H (mm 2 ) KS KX K KF H/D / KC KK KK130 D Swivel Extended Elbow: R odel H3 H (mm 2 ) H3 H A KD KB KR KA KQG2 KG KFG2 S KKA KP Q QR T IDK 205
6 H/D// Series Swivel Type/Parts No. Swivel type fitting parts lineup The body of elbow connectors and extended elbow connectors are compatible with almost any fitting. (Except -0 and -0 which are for the body of tube.) Swivel fittings, elbow () and () constitute the combination with a male connector (H) and connector as shown in the diagram. Union nut ale connector Union nut Elbow connector Body Swivel elbow Union nut Swivel extended elbow Extended elbow connector Note) How to install elbow fittings After tightening by hand, tighten an additional 1/6 to 1/3 turn with a wrench. Union Nut: N N-0 N-06 ø N-08 ø8 N-10 ø10 N-12 ø Elbow Connector: : S ø -08 ø8-10 ø10-12 ø12 S-0 S-06 ø S-08 ø8 S-10 ø10 S-12 ø Extended Elbow Connector: ø -08 ø8-10 ø10-12 ø12 Precautions Be sure to read this before handling the products. Refer to back page 50 for Safety Instructions and pages 13 to for Fittings and Tubing Precautions. Installation Caution 1. Cut the tube perpendicular to the tube axis a little longer than the required length. (Use tube cutter TK-1, 2 or 3.) 2. Then, push the cut tube in until it comes to the flared edge, and tighten the nut by hand. 3. Furthermore, give the nut an additional 1.5 turns with a tightening tool. eave no space between the screwed-in nut and the tube in-line with the tube axis. If tightened insufficiently, nut may be loosened and it may result in air leakage or may come off.. When using soft copper tube, first tighten the nut by hand and then give it an additional one turn with wrench. Use JIS H3300, equivalent to seamless tube C1220T-0, as soft copper tube. If using any other type, it may cause the air leakage or tube to come off. 206
Tube. Flared I.D. Flared I.D. can prevent the tubing from deforming inwards. Specifications
Self-align Fittings Series H, D,, Flared ridge ferrule Prevents accidental loss of ferrule when inserting tubing into the fitting body. Hardened ridge ferrule Prevents breakage of ferrule when tightening
More informationValve Built-in self-seal mechanism. Air does not exhaust after removal of tubing. Stopper Cushion. Release button(blue) Guide Collet Chuck
O-ring O-ring Retainer Spring One-touch fitting (built-in self-seal mechanism) to prevent air exhaust when removing tube. Best for multiple use areas when pressure cannot be shut down. types are available.
More informationDigital Catalog. Operation can be made from the toolbar at the center of the lower portion of the screen.
Digital Catalog Click here to display the contents. Click here to download the PDF file. Operation can be made from the toolbar at the center of the lower portion of the screen. O-ring O-ring Retainer
More informationMiniature Fittings Stainless Steel 316. Hose nipple. Barb. Configuration for easy insertion into the tube Holds the tube tightly.
iniature Fittings Stainless Steel 316 Series S RoHS Applicable Tubes: ø3.2, ø4, ø6 Connection Thread:, R 1/ For use in corrosive environments Compact piping space Tube has a large retaining force. Hose
More informationApplicable Tubing. Tubing material Tubing O.D. Specifications. Fluid Air/Water (1) Operating pressure range (2) Principal Parts Material
Flame Resistant (Equivalent to UL-94 Standard V-0) FR One-touch Fittings KR-W2 Series RoS Guide Collet Chuck ccepts nylon. Large retaining force. he chuck provides secure retention and the collet increases
More informationTubing. Barb. Sleeve. Attaching the sleeve achieves a larage retaining force. Detaching it allows easy removal of the tube. Electroless nickel plated
iniature Fittings Series pplicable Tubing: ø2 onnection Thread:, RoHS ade to Order (Refer to page 9 for details.) pplicable O.D. x I.D.: ø2 x ø.2 onnection thread: / One-touch fitting size: ø.2 / ø Tubing
More informationBody material: Stainless steel 304 Seal material: Fluororubber (Special FKM) Both plug and socket have an integral check valve.
S Couplers KK Series Stainless steel type material: Seal material: Fluororubber () Both plug and socket have an integral check valve. vailable with and without check valves depending on the operating conditions.
More informationRectangular Multi-connector. No. of Connecting Tubes: 10, 20. Plate. Plug connector Socket connector PAT.PEND
Rectangular Multi-connector Series KDM No. of Connecting Tubes: 10, RoHS Multi-connector is effective in saving labor for separate transportation of the panel and the machine, and for exchanging units
More informationInsert Fittings. Series KF. Superior tube mounting. A reliable seal Holds the tube tightly
Insert Fittings Series KF A reliable seal Holds the tube tightly Insert An insert mechanism can provide reliable retaining force on tubes made of a wide variety of materials Tube grip (resin sleeve) Tube
More informationApplicable Tubing. Tubing material Note1) Tubing O.D. Note 1) ø2 is available in polyurethane only. Specifications
One-touch Mini : Metric Size Connecting : M3, M5, R1/8 Outside diameter reduced y 0% (Compared with series KQ), allowing piping in a narrower space. Thread sealant as standard. For application requiring
More informationRectangular Multi-connector. No. of Connecting Tubes: 10, 20. Plate. Plug connector Socket connector PAT.PEND
Rectangular Multi-connector KDM Series No. of Connecting Tubes: 1, 2 RoHS Multi-connector is effective in saving labor for separate transportation of the panel and the machine, and for exchanging units
More informationStainless One-touch Fittings. Applicable Tubing Tube material Tube O.D. Thread Nut
Stainless One-touch Fittings Series KG Guide Collet Chuck Accepts nylon, soft nylon and polyurethane tubes. as large retaining force. Chuck certainly bites tube and collet increases retaining force. Release
More informationMiniature Fittings Series M
Miniature Fittings Series M pplicable Tubing: Ø 3.2, Ø 4, Ø 6 onnection Thread:, M, arb onfiguration for easy insertion into the tube Holds the tube tightly ody With electroless nickel plated Low tightening
More informationApplicable tube O.D. ø3.2, ø4, ø6 Thread M3, M5, R(PT) 1/8 Series KJ. Applicable Tubing. Tube materterial Tube O.D. Specifications
iniature One-touch Fittings One-touch ini pplicable tube O.D. ø, ø, ø,, R(P) 1/ Series KJ Guide 1 Guide Chuck ccepts nylon and polyurethane tubes. as large retaining force. Release button (ight gray) Small
More informationMiniature Fittings Stainless Steel 316. Hose nipple. Barb Configuration for easy insertion into the tube Holds the tube tightly.
Miniature Fittings Stainless Steel 316 Series MS Applicable Tubes: ø3.2, ø4, ø6 Connection Thread:, R 1/ For use in corrosive environments Compact piping space Tube has a large retaining force. Hose nipple
More informationTube Applicable for nylon, soft nylon and polyurethane tubing.
Miniature Fittings Series M pplicable Tubing: ø3.2, ø4, ø6 onnection Thread:, M, arb onfiguration for easy insertion into the tube Holds the tube tightly ody With electroless nickel plated Low tightening
More informationOne-touch Fittings 23% 24% 57% KQ2-G Series CAT.ES50-39A. 30% reduction. force 20% reduction 1. Stainless Steel. Improved tube insertion/removal
Stainless Steel One-touch Fittings etal material: Stainless steel 303 RoS Improved tube insertion/removal Insertion : force ax. 30% reduction ax. Removal : force 20% reduction : Tube removal strength is
More informationASP330F-01 ASP430F-02 ASP530F-03 ASP630F-04 ASP430F-F02 ASP530F-F03 ASP630F-F04 R 1/4 R 3/8 R 1/2 R 1/4 R 3/8 R 1/2 NPT 1/8 NPT 1/8 NPT 1/4
Pilot check valve and speed controller are combined. Realizes momentary intermediate stoppage of a cylinder and able to adjust speed control of it. Work piece Example of drop prevention circuit Tubing
More informationFor Pneumatic Piping/Fittings & Tubing Prior to Use
For Pneumatic Piping/Fittings & Tubing Prior to Use Fittings with Sealant Seal material (fluororesin) is coated on the thread part to the proper thickness and within the proper coating range, which reduces
More informationLow Torque Rotary Joint
Low Torque Rotary Joint MQR Series Metal Seal Type Long service life billion rotations MQR : billion rotations MQR : 0. billion rotations MQR : 0. billion rotations MQR8 : 0. billion rotations MQR: 0.
More informationStainless Steel 316 One-touch Fittings
CT.ES50- Stainless Steel One-touch Fittings aterial etal parts: Stainless steel Seal parts: Special FK Can be used with steam Operating fluid temperature 5 to 0 C Grease-free tubing material FEP, PF, Nylon,
More informationPlug: KBP Elbow module: KBV Female connector union: KBH. Tubing. Guide. Chuck Collet. O-ring Lock ring. Spring Spring guide. Specifications.
Piping Module Series KB RoHS Plug: KBP Elbow module: KBV Female connector union: KBH Lock ring Plug body hread Spring Spring guide Release button (blue) Seal Stud Universal elbow body ubing Guide Chuck
More informationASP330F-01 ASP430F-02 ASP530F-03 ASP630F-04 ASP430F-F02 ASP530F-F03 ASP630F-F04 ASP330F-N01 ASP430F-N02 ASP530F-N03 ASP630F-N04
Speed Controller with Pilot Check Valve with One-touch Fitting Series ASP Pilot check valve and speed controller are combined. Realizes momentary intermediate stoppage of a cylinder and able to adjust
More informationPort size AK AK AK AK /04 AK /10. Specifications
Check Valve AK Series RoS arge flow capacity ow cracking : 0.02 Pa A wide variation of models AK2000-01 AK2000-02 AK000-02 1 8 1 1 dm /(s bar). 9. Critical ratio Weight (g) 0 1 AK000-0 8 0.2 10 AK000-0
More informationSpeed Controller with One-touch Fitting AS13 1F-M3 AS13 1F-M5. Specifications
Speed Controller with One-touch Fitting Series Minimizes installation time and cost Reduces the mounting height and enables compact machinery design. Effective area is larger than the former model. Tube
More informationS Couplers. Series KK. Series KKH. Series KK/KKH. RoHS KQ2 KQB2
Series KK/KK he pullin strenth for the plus and sockets has been improved. wice as stron as the conventional models. Series KK With sleeve lock (Except for ) Effective area 3. to 2 mm 2 Series Series KK
More informationPort size. Part no. M5 x 0.8 R 1/8 R 1/4 R 1/4 R 3/8 R 1/ UNF NPT 1/8 NPT 1/4 NPT 1/4 NPT 3/8 NPT 1/2. Specifications
Dual Speed Controller with One-touch Fitting Series D RoS Enables bi-directional flow control. Unrestricted 3 tube mounting direction. odel Part no. D23F-5 D33F-1 D43F-2 D53F-2 D53F-3 D3F-4 D23F-U/32 D33F-N1
More informationSpeed Controller with One-touch Fitting
Speed Controller with One-touch Fitting Series Elbow Type Reduces labor time! Elbow Brass Stainless steel Electroless nickel plated Stainless steel 33 RoHS TMH y Easo t e us Push-lock type Larger handle
More informationSpeed Controller with Uni One-touch Fitting Push-lock type. New-stand male threads for piping that reduces the screw-in time by 1/3. Model.
Speed Controller with Uni One-touch Fitting Push-lock type Series Elbow Universal Brass New-stand male threads for piping that reduces the screw-in time by 1/3. Gasket Female thread Rc, G NP, NPF Shape
More informationSPEED CONTROLLERS WITH QUICK FITTINGS
SPEED CONTROLLERS WITH QUICK FITTINGS Union Straight Type Fittings for controlling the speed of actuators, such as cylinders. Superior flow rate characteristics and fine tuning adjustments in the low flow
More informationSpeed Controller with One-touch Fitting
Speed Controller with One-touch Fitting S Series Push-lock Type Reduces labor time! Easy to use Easy to lock Unlock Push-lock type Lock Improved tube insertion/removal Max. Insertion force: 30% (8 N) reduction
More informationSUPPLY JOINTS CONTENTS
ACCESSORIES GENERAL CATALOG AIR TREATMENT, AUXILIARY, VACUUM, AND FLUORORESIN PRODUCTS CONTENTS Specifications, Order Codes, Size Table 371 Dimensions 373 NCU Specification Order Codes, Model Table 379
More informationBrass Compression Fitting Range
Compression Fitting Range Fittings Stud Fittings 05 BSPT Page 5-9 05 NPT Page 5-9 01 BSPP/Metric Page 5-01..39 BSPP Page 5-01 Metric Page 5-11 0114 BSPP Page 5-11 09 BSPT Page 5-12 09 NPT Page 5-12 0199
More informationAdded 100 mm and 150 mm lengths. Actuators 10% Air leakage 20% Air blow 70% Current model
Blow Gun Series 20% reduction in power consumption with the SMC Blow gun + S coupler + Coil tube 10% reduction with the Blow gun () only RoHS With cover Extension nozzle Added mm and 150 mm lengths Pressure
More informationSpeed Controller with Indicator
Speed Controller with Indicator The numerical indication of flow rate knob rotations reduces flow setting time and setting errors! Elbow Universal Brass Electroless nickel plated RoHS Stainless steel 1
More information45% 6.5 mm. 6 mm. 4 mm. Compact Cylinder. Compact. lighter. JCQ Series CAT.ES20-239C. Weight. ø12, ø16, ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100
Compact Cylinder ø12, ø16, ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100 RoHS Compact Both ends tapped mounting added. New s ø80, ø100 added. Port thread types NPT, G added. Overall length shortened 10 mm stroke
More informationCompact Cylinder: Large Bore Size Type Double Acting, Double Rod. How to Order. Cushion C Rubber bumper. Action. D Double acting
Compact Cylinder: Large Bore Size Type Double Acting, Double Rod Series CQ2W ø, ø, ø, ø, ø Without auto switch With auto switch B Built-in magnet CQ2WB CDQ2WB Double rod ounting style Through-hole/Both
More informationClean One-touch Fittings
Clean One-touch Fittins Series KP/KP/KPG K KK D S T Series KP Series KP Series KPG 2 One-touch fittins and for blowin systems and drive air One-touch fittins (for blowin) Series KP Collet Polypropylene
More informationMale stud fittings. Male stud elbow. Fluid... Working pressure... Vacuum level... Rated temperature...
FITTINGS Push - in fittings 431 Series Fluid... Working pressure... Vacuum level... Rated temperature... Torque... Standards... Materials... Compressed air Max. 20 bar (290 psi) 55 mm Hg vacuum (99 %)
More informationTube Fitting Stainless SUS316 Compression Fitting Series
http://www.pisco.co.jp FITTING CONTROLLER VALVE TUBE MAKE-TO-ORDER PRODUCTS Compression Fitting of Corrosion Resistant Steel Tube Fitting SUS316 Compression Fitting 120 Chemical Industry Medical Industry
More informationSpecifications. Construction. Component Parts No. 1. Description. Body. Knob. Cover Cam ring Stem Spring guide Spring Seal O-ring Valve Cassette
Finger Valve Series RoHS Large effective area:.0 to 7.5 mm Small knob operating force: 0.04 to 0.4 N m Poppet valve construction seldom suffers seal defection. The series begins with the min. tubing O.D.
More informationPressure measurements can easily be taken any time, anywhere. POWER LIGHT
Compact Manometer Pressure measurements can easily be taken any time, anywhere. RoHS Compact and lightweight Portable type with a lightweight of only about 00 g (unit 50 g, battery 50 g) can also be held
More informationKOMATSU 30 Flare (Metric Threads)
KOMATSU 30 Flare (Metric Threads) KOMATSU (JIS 30 Flare Metric Thread) Connections / Identification JIS 30 Flare connections include series of inch (BSP) threads and metric threads. This section is dedicated
More informationONE TOUCH FITTINGS Series WP2
ONE TOUCH FITTINGS - M5 1/ 1/ 3/ 1/2 Features Attractive design Compact size ed nipples of L, T & Y fittings enable plastic portion to turn by 30º Full area of the inner bore of the tubing is available
More informationOne-Touch Mini Fittings
Series KJ One-Touch Mini Fittings One-Touch Mini Fittings Series KJ Features Outside diameter reduced by 20%(Compared with series KQ), allowing piping in a narrower space. Thread sealant as standard. For
More informationCheck Valve with One-touch Fitting. Male Connector Type Can be mounted directly onto equipment. Can be used for vacuum ( 100kPa)
N7 K/KB Series Check with One-touch Fittin ale Connector Type Can be mounted directly onto equipment Bushin Type Can be used in applications with splashin coolant and spatter, etc. Straiht Type Easily
More informationMetal One-touch Fittings
etal One-touch Fittings Compact and ight pprox. 0% Comparison with KB06-01S Down NEW KB206-01S 1. mm New RoS Conventional model KB06-01S.1 mm pprox. 62% Comparison with KB06-01S ore configuration variations
More informationRapid push-in fittings for plastic tubes Series 1000
CATALOGUE > Release 8.5 > Rapid fittings Series 1000 Rapid push-in fittings for plastic tubes Series 1000 Tube external diameters: 5/3, 6/, 8/6, 10/8, 12/10, 15/12,5 mm Fittings threads: metric (M5, M6,
More informationCompression Style Transportation
Compression Style Transportation Air Brake Fittings eets.o.t. FVSS 571.106 eets SAE J246 & J1131 Reusable Use with Copper Tubing TA Fittings eets.o.t. FVSS 571.106 eets SAE J246 & J1131 Staked in Tube
More informationF LOW CONTROL EQUIPMENT SPEED CONTROLLERS ACCESSORIES MOUNTING BRACKET NOW ALSO WHITE AS2001F AS2051F AS3001F AS4001F ORDER LINES
F LOW CONTROL EQUIPMENT 3-3 SPEED CONTROLLER WITH ONE TOUCH FITTINGS: IN-LINE TYPE SERIES AS1001F, 2001F, 2051F, 3001F, 4001F Minimises installation time and cost Accepts nylon and polyurethane tubing
More informationSpecifications Valve. Construction. Component Parts No. 1. Description. Body. Knob. Cover Cam ring Stem Spring guide Spring Seal O-ring Valve Cassette
Finger Valve Series VHK ohs Large effective area:.0 to 7.5 mm Small knob operating force: 0.04 to 0.4 N m Poppet valve construction seldom suffers seal defection. The series begins with the min. tubing
More informationBrass Compression Fitting Range
Compression Fitting Range Fittings Stud Fittings 0105 BSPT Page 5-9 0105 NPT Page 5-9 0101 BSPP/Metric Page 5-10 0101..39 BSPP Page 5-10 0101 Metric Page 5-11 01 BSPP Page 5-11 0109 BSPT Page 5-12 0109
More informationMiniature Regulator Series ARJ310
Miniature Regulator Series 30 Compact and lightweight (Main body 65 g) 8.3 Improved flow characteristics 0. 0. 0 00 00 300 400 500 Allows smaller mounting pitch 8.8mm 0-M5 30-0 Inlet pressure: MPa Accommodates
More informationGaugeable Alloy 400 Mechanically Attached Pipe and Tube Fittings
www.swagelok.com Gaugeable Alloy 400 Mechanically Attached and Fittings For use with MIL-T-16420K 70/30 and 90/10 copper-nickel tubing and pipe Excellent corrosion resistance in chloride-containing environments
More informationMinimal Fitting Series
http://www.pisco.co.jp FITTING CONTROLLER VALVE TUE MAKE-TO-ORDER PRODUCTS Ultra-Small arb Fitting for Pneumatic Piping Fitting 266 Suitable for Vacuum Piping by a Combination with Vacuum Tube Suitable
More informationMain Block Series. Concentrated Branching Joint for Assembly. Assembling Manifold Blocks for Concentrated Branching
http://www.pisco.co.jp FITTING CONTROLLER VALVE TUE MAKE-TO-ORDER PRODUCTS Concentrated ranching Joint for Assembly Main lock 310 Assembling Manifold locks for Concentrated ranching Same Flow Rate with
More informationSelection guide for piping equipment. Pneumatic Piping Equipment
Selection guide for piping equipment Pneumatic Piping Equipment Piping Equipment INDEX Fittings One-touch Fittings KQ/KQ P. Miniature One-touch KJ P.5 Rotary One-touch Fittings KS/KX Tube Coupler KC One-touch
More informationCompression Fittings. Brass Compression Fittings. Stainless Steel Compression Fittings. PL Nickel-Plated Brass Spigot Fittings
Compression Fittings Compression Fittings Stainless Steel Compression Fittings PL Nickel-Plated Spigot Fittings Compression Fittings Compression Fittings Compression Fittings (P. 5-5) Stainless Steel Compression
More informationatalog /USA otes ontrol omponents 2 Parker Hannifin orporation ivision
Section 1 Parker Hannifin orporation ivision atalog 0802-2/USA otes ontrol omponents 2 Parker Hannifin orporation ivision atalog 0802-2/USA Index ontrol omponents Advantages, Assembly, Ordering Information...
More informationMini Free Mount Cylinder
Mini Free Mount Cylinder Series ø, ø, ø, ø, ø, ø1, ø Series 1 ction Stroke 1 2 0 0 0 Clean uto switch series None Rod end Male threaded Without thread Solid state switch D-F D-M9 D-M9 W Female threaded
More informationSpeed Controller with Indicator
Speed Controller with Indicator Numerical indication of handle rotation for flow rate reduces flow setting time and setting errors! Indicator window Body size Body size or larger Indicator window Number
More informationInformation. Electric Actuator/Rod Type. Added size 63 to the LEY series! Series LEY AC Servo Motor (400 W) Size: 63. RoHS
Information SC Corporation Akihabara UDX 1F, 4-14-1, Sotokanda, Chiyoda-ku, Tokyo 1-21, JAPAN http://www.smcworld.com 12 SC Corporation All Rights Reserved Electric Actuator/Rod Type Series EY AC Servo
More informationStandard Specifications
Miniature Regulator ARJ020F Compact and lightweight (6g) Low cracking pressure 0.02MPa Standard model equipped with backflow function Standard Specifications Port size IN side OUT side (Applicable tube
More informationFIT-2. Inch. Ø Â" to Ë" O/D tube
For simple and quick assembly of pneumatic circuits. Positive tube connection. Wide range of types available. Reliable and corrosion resistant. Specifications Fluid: Compressed air, nitrogen, inert and
More informationBRASS FITTINGS and Related Products
Discount Hydraulic Hose.com Cat. BR602 February, 2006 Prices Subject to change BRASS FITTINGS and Related Products Air Brake Fittings: Nylon Tubing 2 Push-In Air Brake Fittings 4 Pre-Assembled Air Brake
More informationStandard Specifications
Miniature Regulator ARJ020F Compact and lightweight (6g) Low cracking pressure 0.02MPa Standard model equipped with backflow function Standard Specifications Port size IN side OUT side (Applicable tube
More informationSeries 10-M. RoHS. Miniature Fittings. Construction. Tubing. Tubing. Barb. Barb. Body. Cap Nut. Gasket. Body. Gasket.
Series 10-M Miniature Fittings onstruction RoHS irectional ontrol Valves arb onfiguration for easy insertion into the Holds the tube tightly. ody lectroless plated nickel Low tightening torque Tight seal
More informationHow to Order. M5 M5 x 0.8 U10/ UNF
Series -S-FSG Push-lock ype RoHS Speed Controller with Indicator Stainless Steel ype (Elbow/Universal) How to Order 1 ype 2 Elbow 3 Universal Body size -32UNF Port size 5 U/32-32UNF Stainless steel type
More information1 Pneumatics. Transmitters VR4151 VR4152 VR1210 VR1220 VR1210F VR1220F VR1211F VR VR3200 VR3201 VR3100 VR3110
Best 1 Pneumatics Transmitters Relay valve P. 1900 Side piping: 30 x 53 x 91 Bottom piping: 30 x 8 x 91 VR151 VR152 Effective area (mm 2 ) Number of ports Function 7 5 Metal Spool Shuttle valve P. 1902
More informationSKY Refrigeration Brass Fittings. Forged Short Barrel Flare Nuts (Co 2. Forged Long Barrel Flare Nuts (Frost Free & Co 2
Forged Short Barrel Flare Nuts (Co 2 ) 13 SKY Item No. Item Description CO2 Pack qty 201-0404 1/4 SAE Yes 10 201-0504 5/16 SAE X 1/4 Tube Yes 10 201-0505 5/16 SAE Yes 10 201-0606 3/8 SAE Yes 10 201-0808
More informationStandard Specifications
Miniature Regulator ARJ020F Compact and lightweight (6g) Low cracking pressure 0.02MPa Standard model equipped with backflow function Standard Specifications Port size IN side OUT side (Applicable tube
More informationMulti-Circuit Rotary Block
http://www.pisco.co.jp FITTING CONTROLLER VALVE TUBE MAKE-TO-ORDER PRODUCTS Multi-Circuit Block for Rotating Applications Multi-Circuit Rotary Block 302 Make to Order Suitable for Low-Speed Rotating Applications
More informationBrass Push-Type Fittings. Tube Thread. Part O.D. (M) NPT. No. in. in.
Brass Push-Type Fittings MALE ADAPTER SWIVEL MALE ELBOW 35.0 /8 0-3 35. /8 /6 35.4 /8 /8 35.6 5/3 0-3 35.8 5/3 /8 35.34 5/3 /4 35.40 3/6 0-3 35.4 3/6 /8 35.54 /4 0-3 35.56 /4 /8 35.58 /4 /4 35.6 /4 3/8
More informationINOX PrOgram made by eisele
EISELE INOXline Program Stainless steel connection solutions Quality solutions Made by EISELE INOX 2 Quality solutions - Made by EISELE EISELE IS QUALITY MADE IN GERMANY Over 30 patents, more than 5.000
More informationFittings Metal Push-To- Connect Fittings. We make things MOVE
Fittings Metal Push-To- Connect Fittings We make things MOVE Contents 3 Fittings 4 Product Features 4 Push-In Fittings 4 Features and Benefits 5 How it Works 5 Materials of Construction 5 Fluid 5 Operating
More informationBRASS FITTINGS (R410a) BRASS FITTINGS
(R410a) R410a Short Barrel Flare Nuts 5010404410A 1/4 $4.21 5010808410A 1/2 $8.52 5010504410A 5/16fl x 1/4 tube $5.73 5011010410A 5/8 $13.50 5010606410A 3/8 $7.08 5011212410A 3/4 $20.54 BRASS FITTINGS
More informationMiniature Regulator. Standard Specifications. Model IN side OUT side (Applicable tubing O.D.) Proof pressure Maximum operating pressure
Miniature Regulator Series 00F Compact and lightweight ( g) Low cracking pressure 0.0 MPa Standard model equipped with backflow function Standard Specifications Port size Fluid side side (Applicable tubing
More informationCOUPLING CATALOGUE. Push-In, Standard, Conventional, Accessories
COUPLING CATALOGUE Push-In, Standard, Conventional, Accessories Coupling Catalogue Table of Content Push-in and Composite Building Block... 4 Standard Connectors... 12 Quick Connection Systems P5.... 16
More informationHANDBOOK PIPING ACCESSORIES. Ed PIPING ACCESSORIES AT-ED 01/ ENG 1
HANDBOOK Ed. 2017 AT-ED 01/2017 - ENG 1 CHAPTER 3 ACCESS FITTINGS AND VALVE CORES FOR REFRIGERATION PLANTS THAT USE HCFC, HFC, HC, HFO, OR R744 REFRIGERANTS APPLICATIONS The access fittings illustrated
More informationMessing. screw-in connectors
Messing screw-in connectors 2 Quality solutions - Made by EISELE EISELE IS QUALITY MADE IN GERMANY Over 30 patents, more than 8,000 standard articles, and 2,000 customized solutions impressively underline
More informationOrder from MARYLAND METRICS P.O. Box 261 Owings Mills, MD USA web:
Push-In Fittings LF 3000 LF 3200: 3 mm LIQUIfit LF 300 LF 300/ LF 3900 LF 0 PARKER LEGRIS Industrial Connector Systems Products are available from: MARYLAND METRICS P.O. Box 21 Owings Mills, MD 21117 USA
More informationConnector Series. Multiple Push-In Fitting Type. Desorption of Several Tubes at One Time. Combinable Connectors by Connector Band.
http://www.pisco.co.jp FITTING CONTROLLER VALVE TUBE MAKE-TO-ORDER PRODUCTS Multiple Push-In Fitting Type Connector 4 Desorption of Several Tubes at One Time. Combinable Connectors by Connector Band. Combinable
More informationSeries 10-M. Miniature fittings. Construction. Tubing. Tubing. Barb. Barb. Body. Cap nut. Gasket. Body. Gasket Low tightening torque Tight seal
onstruction Miniature fittings Hose nipple arb fitting arb onfiguration for easy insertion into the Holds the tube tightly. ody lectroless plated nickel Low tightening torque Tight seal Tubing ap nut ertainly
More informationComposite Push-In Fittings BSP/Metric Series 7000
2 Composite Push-In Fittings BSP/Metric Series 7000 NORTH AMERICAN FITTINGS & FLOW CONTROL VALVE CATALOG > Release 8.6 Tube Diameter OD: 4, 6, 8, 10, 12, 16 mm Thread Type: metric (M5, M7), BSP (G1/8,
More informationMINIMATIC FITTINGS. Push-Quick Fittings. Quick Connect Fittings. Clippard Instrument Laboratory, Inc. (513)
MINIMATIC FITTINGS Clippard Instrument Laboratory, Inc. (513) 521-4261 www.clippard.com Push-Quick Fittings 325-329 Slip-On Fittings 330-335 Brass Fittings 336-347 Quick Connect Fittings 348-353 Fittings
More informationFLOW CONTROL VALVES & ACCESSORIES
TECHNICAL SPECIFICATIONS construction Valve group Materials Mounting Ports Position Operating temperature PNEUMATIC DATA Operating pressure Nominal pressure nominal flow needle-type Meter In, Meter Out,
More informationEISELE IS QUALITY MADE IN GERMANY AVAILABLE ON STOCK IN GRAND RAPIDS, MI
2 Quality solutions - Made by EISELE EISELE IS QUALITY MADE IN GERMANY AVAILABLE ON STOCK IN GRAND RAPIDS, MI Over 30 patents, more than 8,000 standard articles, and 2,000 customized solutions impressively
More informationPneumatics CONTENT
Pneumatics CONTENT 2 3 4 5 6 7 8 9 Fittings 453 Flexible Tube 47 Quick Release Couplings 477 Actuators 485 Solenoid & Pneumatic Valves 495 Mechanical & Manual Valves 507 Automatic Valves 57 Filters, Regulators
More informationSpeed Controller High Flow
http://www.pisco.co.jp CONTROLLER VALVE TUBE MAKE-TO-ORDER PRODUCTS Speed Control Valve for High Speed Cylinder High Flow Speed Control Valve for Actuator. High Flow Type with Same Size as. Suitable for
More informationShinya Nojima President & COO Technology can be found wherever something is flowing The is a leading manufacturer of high-technology products for a wide range of industries. Our corporate policy is to
More information37 flare couplings to ISO
Applications Widely used throughout the world, 37 flare couplings are designed for most medium pressure mobile and stationary applications. These couplings are characterized by easy, compact assembly and
More informationMur-lok. Mur-lok Polypropylene Quick-Connect Fittings & Valves. Check Valves. Fixed NPTF 90 Elbows. Check Valve Elbow. Swivel NPTF 90 Elbows
Polypropylene Quick-Connect Fittings & Valves Polypropylene Quick-Connect Fittings & Valves G.A. Murdock offers the largest selection of polypropylene quick-connect fittings and valves on the market. These
More information82 Series Fittings Table of Contents
Table of Contents ase Part Number with Description Table of Contents (page 1 of 1)... Page Number 30182 Male NPTF Pipe - Rigid Straight... -234 31382 Male NPTF Pipe - Swivel - Straight... -235 30282 Female
More informationAutomotive Plumbing Catalog
Automotive Plumbing Catalog Metal Tubing Tube Nuts Weld-On Studs Tube Unions Clips and Brackets Bulkhead Nuts Tees Thread Adapters Bump Tube Adapters Transmission Line Adapters Copper Washers Banjo Bolts
More informationAn Installer s Pocket Guide for Swagelok Tube Fittings
www.swagelok.com An Installer s Pocket Guide for Swagelok Fittings 2 CONTENTS Intermixing/Interchanging... 8 Metric Swagelok Fittings... 8 Installation Instructions Safety Precautions... 9 Up to /25 mm
More informationTransmitters: Relay Valve
Relay Valve VR5/5 Series Appropriate output sequences are affected according to the signal received from the mechanical valve. It is equivalent to the auxiliary relay of an electrical system. Specifications
More informationLF 3600 Push-In Fittings Range
LF 300 Push-In Fittings Range Stud Fittings Straights 375 BSPT Page 1-97 301 BSPP/Metric Page 1-97 31 Metric Page 1-97 31 BSPP/Metric Page 1-9 321 BSPT Page 1-9 331 BSPP/Metric Page 1-9 300 Page 1-9 Push-In
More informationTube Fitting Stainless SUS316 Series
http://www.pisco.co.jp FITTING CONTROLLER VALVE TUE MAKE-TO-ORDER PRODUCTS Push-In Fitting Type of Corrosion Resistant Steel Tube Fitting SUS316 108 Copper alloy free material Nongrease Clean-room packaging
More informationTransmitters: Relay Valve VR4151/4152
Relay Valve VR4151/4152 Appropriate output sequences are affected according to the signal received from the mechanical valve. VR4151 VR4152 Precautions Be sure to read before handling. Refer to pages 5-11-2
More information82 series Brass compression fittings
> > Port size: Ø 6... 42 mm tube size, SPP and SPT thread > > Suitable for use on seam welded as well as seamless tube or pipe > > For use in areas of vibration > > Pre-assembled units > > No special assembly
More information