VACUUM PADS CONTENTS ACCESSORIES GENERAL CATALOG AIR TREATMENT, AUXILIARY, VACUUM, AND FLUORORESIN PRODUCTS. Caution VACUUM PADS
|
|
- Opal Hawkins
- 6 years ago
- Views:
Transcription
1 drawing data catalog is available. ESSORIES GENERL TLOG IR TRETMENT, UXILIRY, VUUM, N FLUORORESIN PROUTS VUUM PS ONTENTS Specifications 729 Order odes 7 Theoretical Lifting Force, Rubber Materials and pplications 731 Mass 732 imensions of Rubber s 733 imensions of KPHF 735 imensions of KPVF 737 imensions of KPPF 738 imensions of KPLF 739 imensions of KPHS 740 imensions of KPVS 742 imensions of KPPS 743 imensions of KPLS 744 imensions of Rubber Mounting Portion 745 Handling Instructions and Precautions 747 VUUM PS aution efore use, be sure to read the Safety Precautions on p
2 VUUM PS Specifications Standard type, horizontal piping Horizontal piping, fixed Note 3 Horizontal piping, with built-in spring Note 3 KPHF KPHS Note 1 mm 2.5, , , , , 8 25, 35 40, 60, or Note 2 port thread mm Rc1/ Rc1/8 mm [in.] return force (at 1/2 ) N [lbf.] ody ase body over O-ring Guide Rubber (color) Materials Major mounting body section Standard type, vertical piping 3 [0.12] 5 [0.] 6 [0.24] 7 [0.28] [0.39] [0.79] 1.8 [0.40] 2.6 [0.58] 1.0 [0.22] 3.5 [0.79] 9.8 [2.].8 [2.43] rass (nickel plated) Steel (nickel plated) rass (nickel plated) Steel (nickel plated) luminum alloy (anodized) Synthetic rubber : NR rass (nickel plated) Stainless steel Synthetic rubber: NR (black), urethane (green), silicone (white), fluorine (black with white mark) luminum alloy (anodized) Synthetic rubber : NR Steel (nickel plated) Piano wire (zinc plated) Note 1 Note 2 mm mm mm [in.] return force (at 1/2 ) N [lbf.] ody Materials Rubber (color) 2.5, , Vertical piping, fixed 6, 8 KPVF,, Vertical piping, with built-in spring Notes : 1. For the sizes inside the same box, their mounting bodies are all the same. (Some of the rubber mounting screws are not identical.) Notes : 2. For the s, select the urethane. Notes : 3. To change to the vertical piping of 600, replace the R1/8 piping plug ,, 35 40, 2.5, , [0.12] 2.5 [0.56] rass (nickel plated) 6, 8 3 [0.12] 2.4 [0.54] KPVS,, 64 5 [0.] 1.0 [0.22] Synthetic rubber: NR (black), urethane (green), silicone (white), fluorine (black with white mark) 25,, 35 40, 9 [0.35] 4.9 [1.] all joint type Note 1 or port thread return force (at 1/2 ) Materials 729 Major mounting body portion ody mm mm mm [in.] N [lbf.] Main shaft ase body over O-ring Horizotal piping, fixed Note KPPF 40 rass (nickel plated) rass (nickel plated) Horizontal piping, with built-in spring Note 2 KPPS 64M5 Rc 1/8 64M5 Rc 1/8 Steel Steel rass (nickel (nickel plated) plated) luminum alloy (anodized) Synthetic rubber: NR Steel (nickel plated) Steel (nickel plated) Stainless steel Rubber (color) Synthetic rubber: NR (black), urethane (green), silicone (white), fluorine (black with white mark) Notes: 1. For the sizes inside the same box, their mounting bodies are all the same. Notes: 2. To change to the vertical piping, replace the horizontal piping use fitting and plug. (For sizes 60 and 80, replace only plug.) [0.] [0.39] [0.79] [1.18] [0.39] [0.79] [1.18] [1.97] 4.0 [0.90] [0.39] [1.18] [1.97] 70 [2.76] 14.1 [3.17] Non-rotating type Note 1 Horizontal piping, fixed Note 2 mm 6 8 KPLF rass (nickel plated) Horizontal piping, with built-in spring Note M3 5 [0.] [0.39] [0.79] [1.18] 2.9 [0.65] KPLS shape Oval Oval or port thread return force (at 1/2 ) Materials Major mounting body portion Rod Guide mm mm [in.] N [lbf.] rass (chrome plated) Oil-impregnated steel alloy Stainless steel Rubber (color) Synthetic rubber: NR (black), urethane (green), silicone (white), fluorine (black with white mark) Notes: 1. For the sizes inside the same box, their mounting bodies are all the same. Notes: 2. To change to the vertical piping, replace the horizontal piping use fitting and plug.
3 Order odes Vacuum model (with mounting body) KP KP Rubber material N NR S Silicone U F Fluorine Enter code only for KPPS and KPLS. See q spring s table. size See w sizes tables. Mounting body specification HF Without spring, standard type, horizontal piping VF Without spring, standard type, vertical piping PF Without spring, ball joint (universal) type LF Without spring, non-rotating type HS uilt-in spring, standard type, horizontal piping VS uilt-in spring, standard type, vertical piping PS uilt-in spring, ball joint (universal) type LS uilt-in spring, non-rotating type Rubber model (without mounting body) lank P L Rubber material N NR S Silicone U F Fluorine size See w sizes tables. Standard type all joint (universal) type Note Non-rotating type Note: sizes 60 and 80 in the ball joint type are the same as the standard type. When ordering, enter the code of the standard type. onductive, halogen processed vacuum Vacuum model (with mounting body) Rubber material Note N NR S Silicone Note: Halogen processed available for N only. The halogen processed excludes 1, 1 and 0. Enter code only for KPPS and KPLS. See q spring s table. size See w sizes tables. Mounting body specification HF Without spring, standard type, horizontal piping VF Without spring, standard type, vertical piping PF Without spring, ball joint (universal) type LF Without spring, non-rotating type HS uilt-in spring, standard type, horizontal piping VS uilt-in spring, standard type, vertical piping PS uilt-in spring, ball joint (universal) type LS uilt-in spring, non-rotating type Specification KP onductive KP Halogen processed Rubber model (without mounting body) lank P L Specification KP onductive KP Halogen processed Rubber material Note N NR S Silicone Note: Halogen processed for N only. The halogen processed excludes 1, 1 and 0. size See w sizes tables. Standard type all joint (universal) type Note Non-rotating type Note: sizes 60 and 80 in the ball joint type are the same as the standard type. When ordering, enter the code of the standard type. q s a KPPS spring s s 5 70, w sizes a Standard type (oval) , 25,, 35 40, 60, (oval) s KPLS spring s 5mm, mm, mm, mm available in each size s all joint type onductive vacuum (NR, silicone) d Non-rotating type Rubber material Volume resistivity Note I mark onductive NR 2 5 Ωcm lue point mark onductive silicone Halogen processed NR Ωcm (oval) 3.57 (oval) 4 (oval) 5 (oval) 6 (oval) 4 (oval) 5 (oval) 6 (oval) 8 (oval) 4 (oval) 5 (oval) 6 (oval) 8 (oval) The vacuum rubber material is conductive rubber, for passing static electricity and preventing electrification. Halogen processed vacuum (NR) Halogen processed rubber in the vacuum reduces the rubber s friction resistance by 88% Note reducing the occurrence of rubber s picking marks. Note: Koganei comparisons. Rubber material is NR. Volume resistivity, and identification mark Note: Specified values for the materials. Yellow point mark rown point mark 7 VUUM PS
4 Theoretical Lifting Force Vacuum kpa [in.hg] mm [in.] area cm 2 [in. 2 ] 93.3 [27.56] 80.0 [23.62] 66.7 [19.69] 53.3 [.75] 40.0 [11.81] 26.7 [7.87] 13.3 [3.94] [0.098] [0.138] [0.24] [0.31] [0.39] [0.59] [0.79] [0.98] [1.18] [1.38] [1.57] [1.97] [2.36] [3.] [3.74] [3.94] [4.72] [5.91] [7.87] [0.0076] [0.0149] [0.0439] [0.0778] [0.1217] [0.2738] [0.4868] [0.7606] [1.095] [1.4909] [1.947] [3.043] [4.381] [7.789] [.984] [12.17] [17.5] [27.38] [48.7] [0.3] [0.1] [0.593] [1.05] [1.65] [3.70] [6.59] [.] [14.81] [.16] [26.35] [41.16] [59.35] [5] [149] [165] [237] [370] [659] [0.088] [0.173] [0.8] [0.90] [1.41] [3.18] [5.64] [8.81] [12.70] [17.29] [22.59] [35.29] [.80] [90] [127] [141] [3] [318] [565] [0.074] [0.144] [0.425] [0.75] [1.18] [2.65] [4.70] [7.35] [.59] [14.41] [18.84] [29.43] [42.26] [75] [6] [118] [169] [265] [471] [0.059] [0.1] [0.339] [0.60] [0.94] [2.12] [3.75] [5.87] [8.47] [11.53] [.04] [23.51] [33.94] [60] [85] [94] [135] [212] [376] [0.044] [0.086] [0.254] [0.45] [0.71] [1.59] [2.83] [4.41] [6.36] [8.65] [11.28] [17.65] [25.40] [45] [64] [71] [2] [9] [282] [0.029] [0.058] [0.171] [0.] [0.47] [1.06] [1.89] [2.94] [4.25] [5.78] [7.53] [11.78] [16.86] [] [42] [47] [68] [6] [188] [0.0] [0.029] [0.085] [0.] [0.23] [0.53] [0.94] [1.46] [2.11] [2.88] [3.75] [5.87] [8.54] [] [21] [23] [34] [53] [94] N [lbf] Note: Figures in the above table are calculated values. Oval Vacuum kpa [in.hg] mm [in.] area cm 2 [in. 2 ] 93.3 [27.56] 80.0 [23.62] 66.7 [19.69] 53.3 [.75] 40.0 [11.81] 26.7 [7.87] 13.3 [3.94] [ ] [ ] [ ] [0.0.39] [ ] [ ] [0.0.79] [ ] [0.3.79] [ ] [0.1.18] [ ] [ ] [0.017] [ ] [ ] [ ] [0.084] [ ] [0.447] [ ] [ ] [ ] [ ] [ ] [0.381] [0.1] [0.459] [0.767] [0.94] [1.] [1.61] [2.09] [2.35] [3.07] [2.45] [3.03] [3.61] [4.75] [0.128] [0.393] [0.658] [0.80] [0.94] [1.38] [1.79] [2.02] [2.63] [2.] [2.60] [3.] [4.07] [0.7] [0.328] [0.548] [0.67] [0.78] [1.] [1.49] [1.68] [2.19] [1.75] [2.17] [2.58] [3.39] [0.086] [0.262] [0.438] [0.54] [0.63] [0.92] [1.19] [1.34] [1.75] [1.40] [1.73] [2.06] [2.71] [0.064] [0.197] [0.329] [0.40] [0.47] [0.69] [0.90] [1.01] [1.32] [1.05] [1.] [1.55] [2.03] [0.043] [0.131] [0.219] [0.27] [0.31] [0.46] [0.60] [0.67] [0.88] [0.70] [0.87] [1.03] [1.36] [0.021] [0.065] [0.9] [0.13] [0.16] [0.23] [0.] [0.33] [0.44] [0.35] [0.43] [0.51] [0.68] N [lbf] Note: Figures in the above table are calculated values. Rubber Materials and pplications Rubber materials and characteristics Materials NR Silicone N S U Fluorine F Hardness Hs Operating temperature range [ F] 00 [32212] 0 [22392] 070 [328] 02 [32482] Tensile strength (N/cm 2 ) [psi.] 1970 [2860] 8 [10] 2940 [4260] [2190] Elongation (%) Oil resistance (gasoline) Oil resistance (benzol) Weather resistance Ozone resistance lkali resistance cid resistance Water resistance Wear resistance Electrical insulation Tear resistance Remark: Optimum Suitable under certain conditions Not recommended annot be used Note: This table shows the general characteristics of rubber. Take full consideration of various operating conditions. 731
5 Mass Standard type mm [in.] Fixed type type KPHF KPVF KPHS KPVS 2.5 [0.] 3 [0.11] 8 [0.28] 5 [0.18] 9 [0.32] 3.5 [0.14] 3 [0.11] 8 [0.28] 6 [0.21] 9 [0.32] 24 [ ] 3 [0.11] 8 [0.28] 6 [0.21] 9 [0.32] 3.57 [ ] 3 [0.11] 8 [0.28] 6 [0.21] 9 [0.32] 6 [0.24] 11 [0.39] 9 [0.32] 21 [0.74] [0.35] 8 [0.31] 11 [0.39] 9 [0.32] 21 [0.74] [0.35] [0.39] 14 [0.49] 13 [0.46] 35 [1.23] 24 [0.85] [0.59] [0.53] 14 [0.49] 36 [1.27] 25 [0.88] [0.79] 16 [0.56] [0.53] 36 [1.27] 26 [0.92] 25 [0.98] 31 [1.09] 33 [1.16] 73 [2.57] [1.76] [1.18] 31 [1.09] 34 [1.] 73 [2.57] [1.76] 35 [1.38] 36 [1.27] 34 [1.] 77 [2.72] 51 [1.80] 40 [1.57] 37 [1.31] 36 [1.27] 75 [2.65] 53 [1.87] [1.97] 47 [1.66] 36 [1.27] 86 [3.03] 63 [2.22] 60 [2.36] 216 [7.62] 368 [12.98] 80 [3.] 224 [7.90] 374 [13.19] 95 [3.74] 234 [8.25] 384 [13.54] 0 [3.94] 235 [8.29] 386 [13.62] 1 [4.72] 573 [.21] 800 [28.22] 1 [5.91] 619 [21.83] 843 [29.74] g [oz.] 0 [7.87] 85 [38.27] 1311 [46.24] all joint type type Fixed type KPPF- KPPF- 38 [1.34] KPPF- 52 [1.83] KPPF [1.83] KPPF- 55 [1.94] KPPF [1.94] KPPF-40 1 [3.56] KPPF- 4 [3.67] KPPF [.38] KPPF [.70] KPPS [2.] KPPS-- 66 [2.33] KPPS-- 76 [2.68] KPPS-- 86 [3.03] KPPS [2.] KPPS-- 66 [2.33] KPPS-- 76 [2.68] KPPS-- 86 [3.03] KPPS-- 80 [2.82] KPPS-- 90 [3.17] KPPS-- 0 [3.53] KPPS [4.] KPPS [2.82] KPPS [3.17] KPPS-25-0 [3.53] KPPS [4.] KPPS-- 80 [2.82] KPPS-- 90 [3.17] KPPS-- 0 [3.53] KPPS [4.] KPPS [2.82] KPPS [3.17] KPPS-35-0 [3.53] KPPS [4.] KPPS [4.51] KPPS [4.87] KPPS [5.22] KPPS [5.93] g [oz.] Mass Mass 38 [1.34] KPPS [4.66] type KPPS [5.01] KPPS-- 2 [5.36] KPPS [6.07] KPPS [24.76] KPPS [27.48] KPPS [29.63] KPPS [31.82] KPPS-80-7 [25.04] KPPS [27.76] KPPS [29.91] KPPS [32.] Non-rotating type type Fixed type KPLF-6 Mass KPLF-8 13 [0.46] KPLF- 13 [0.46] KPLF [0.46] KPLF [0.46] KPLF-4 13 [0.46] KPLF-5 13 [0.46] KPLF-6 13 [0.46] KPLF-4 [0.53] KPLF-5 [0.53] KPLF-6 [0.53] KPLF-8 [0.53] KPLF-4 16 [0.56] KPLF-5 16 [0.56] KPLF-6 16 [0.56] KPLF-8 16 [0.56] KPLS [1.38] KPLS-6-43 [1.52] KPLS-6-52 [1.83] KPLS-6-60 [2.12] KPLS [1.38] KPLS-8-43 [1.52] KPLS-8-52 [1.83] KPLS-8-60 [2.12] KPLS [1.38] KPLS-- 43 [1.52] KPLS-- 52 [1.83] KPLS-- 60 [2.12] KPLS [1.38] KPLS [1.52] KPLS [1.83] KPLS [2.12] KPLS [1.38] KPLS [1.52] KPLS [1.83] KPLS [2.12] KPLS [1.38] KPLS-4-43 [1.52] KPLS-4-52 [1.83] KPLS-4-60 [2.12] g [oz.] Mass 13 [0.46] KPLS [1.38] type KPLS-5-43 [1.52] KPLS-5-52 [1.83] KPLS-5-60 [2.12] KPLS [1.38] KPLS-6-43 [1.52] KPLS-6-52 [1.83] KPLS-6-60 [2.12] KPLS [1.48] KPLS-4-46 [1.62] KPLS-4-55 [1.94] KPLS-4-63 [2.22] KPLS [1.48] KPLS-5-46 [1.62] KPLS-5-55 [1.94] KPLS-5-63 [2.22] KPLS [1.48] KPLS-6-46 [1.62] KPLS-6-55 [1.94] KPLS-6-63 [2.22] KPLS [1.48] KPLS-8-46 [1.62] KPLS-8-55 [1.94] KPLS-8-63 [2.22] KPLS [1.48] KPLS-4-46 [1.62] KPLS-4-55 [1.94] KPLS-4-63 [2.22] KPLS [1.48] KPLS-5-46 [1.62] KPLS-5-55 [1.94] KPLS-5-63 [2.22] KPLS [1.48] KPLS-6-46 [1.62] KPLS-6-55 [1.94] KPLS-6-63 [2.22] KPLS [1.48] KPLS-8-46 [1.62] KPLS-8-55 [1.94] KPLS-8-63 [2.22] Note: The mass values shown above are the mass of a mounting body with rubber (NR) attached. VUUM PS 732
6 imensions of Rubber s (mm) KP-2 KP-3.5 ode E F G Y KP KP KP-6 KP-24 KP-3.57 ode E KP KP ode G H J K Y KP KP F KP-8 KP- KP- KP- KP-25 KP- KP-35 KP-40 KP- KP- KP- KP- KP-25 ode E F G Y KP- KP-35 KP-40 KP- ode E F G Y KPP- KPP- KPP- KPP-25 KPP- KPP-35 KPP-40 KPP- KP-60 KP-80 KP-95 KP-0 ode KPP- KPP-25 KPP- KP-1 KP-1 KP KPP ode KPP-400 KPP-0 KP-600 KP-800 KP-9 KP-0 E F G L M N KP-1 KP-1 KP-0 ode E
7 imensions of Rubber s (mm) KPL-6 KPL-8 KPL- KPL-24 KPL-3.57 KPL-4 KPL-5 KPL-6 KPL-4 KPL-5 KPL-6 KPL-8 ode KPL-3.57 KPL-4 KPL-5 KPL-6 G H K ode KPL-4 KPL-5 KPL-6 KPL-8 K J KPL-4 KPL-5 KPL-6 KPL-8 VUUM PS ode KPL-4 KPL-5 KPL-6 KPL-8 K J
8 imensions of KPHF (mm) KPHF-1 2, , , 8 epth 5 epth 6 Oval KPHF-2 KPHF-3.5 KPHF-24 KPHF KPHF-6 KPHF ,, 25,, 35, 40, epth 6 E F KPHF- KPHF- KPHF KPHF-25 KPHF- KPHF-35 KPHF-40 KPHF M.8 epth 12 M81 epth
9 imensions of KPHF (mm) KPHF-2 60, 80, 95, 0 With plug Width across flats 21 Width across flats 22 Piping port location KPHF-60 KPHF-80 KPHF-95 KPHF Remark: hanging the location of the plug allows for vertical pipe installation use. 1, 1, 0 With plug Width across flats 21 Width across flats 22 VUUM PS KPHF-1 KPHF-1 KPHF-0 Piping port location Remark: hanging the location of the plug allows for vertical pipe installation use. 736
10 imensions of KPVF (mm) KPVF 2, , , 8 7 (Width across flats) 8.1 (Width across corners) 7 (Width across flats) 8.1 (Width across corners) Oval KPVF-2 KPVF-3.5 KPVF-24 KPVF KPVF-6 KPVF ,, 25,, 35, 40, 14 (Width across flats) 16.2 (Width across corners) (Width across flats) 11.5 (Width across corners) KPVF- KPVF- KPVF KPVF-25 KPVF- KPVF KPVF KPVF
11 imensions of KPPF (mm) KPPF,, 25,, 35 Plug Width across flats 14 Width across flats 14 Plug Width across flats 14 Width across flats 14 arb fitting arb fitting KPPF- KPPF Piping port location Remark: Switching between the plug and barb fitting allows for vertical piping installation use. KPPF- KPPF KPPF- KPPF Piping port location Remark: Switching between the plug and barb fitting allows for vertical piping installation use. 40, 60, 80 With plug Plug Width across flats 21 Width across flats 14 Width across flats 14 Width across flats 22 arb fitting VUUM PS KPPF-40 KPPF Piping port location Remark: Switching between the plug and barb fitting allows for vertical piping installation use. KPPF-60 KPPF Piping port location Remark: hanging the location of the plug allows for vertical pipe installation use. 738
12 imensions of KPLF (mm) KPLF 6, 8, Width across flats Plug Width across flats Plug arb fitting arb fitting Oval KPLF-6 KPLF-8 KPLF- KPLF-24 KPLF-3.57 KPLF-4 KPLF-5 KPLF-6 X Y Remark: Switching between the plug and barb fitting allows for vertical piping installation use. Oval KPLF-4 KPLF-5 KPLF-6 KPLF-8 KPLF-4 KPLF-5 KPLF-6 KPLF-8 X Y Remark: Switching between the plug and barb fitting allows for vertical piping installation use. 739
13 imensions of KPHS (mm) KPHS-1 2, , , 8 M.5 7 (Width across flats) 8.1 (Width across corners 12 (Width across flats) 13.9 (Width across corners 3 (Stroke) 5 (Stroke) 5 (Width across flats) (Width across flats) Oval KPHS KPHS KPHS KPHS KPHS-6 6 KPHS ,, 25,, 35, 40, M (Width across flats) 16.2 (Width across corners M (Width across flats) 19.6 (Width across corners 6 (Stroke) 7 (Stroke) (Width across flats) 12 (Width across flats) VUUM PS KPHS KPHS KPHS KPHS KPHS- 83 KPHS KPHS KPHS
14 imensions of KPHS (mm) KPHS-2 60, 80, 95, 0 With plug (Stroke) Width across flats 32 Width across flats 22 KPHS-60 KPHS-80 KPHS-95 KPHS height Remark: hanging the location of the plug allows for vertical pipe installation use. Piping port location , 1, 0 (With plug) Width across flats 32 (Stroke) Width across flats 22 KPHS-1 KPHS-1 KPHS height Remark: hanging the location of the plug allows for vertical pipe installation use. Piping port location
15 imensions of KPVS (mm) KPVS 2, , , 8 3 (Stroke) 8 (Width across flats) 9.2 (Width across corners 3 (Stroke) 8 (Width across flats) 9.2 (Width across corners Oval KPVS KPVS KPVS KPVS KPVS KPVS ,, 25,, 35, 40, 17 (Width across flats) 19.6 (Width across corners 14 (Width across flats) 16.2 (Width across corners 5 (Stroke) 9 (Stroke) VUUM PS KPVS- 53 KPVS- 53 KPVS KPVS KPVS- 68 KPVS KPVS KPVS
16 imensions of KPPS (mm) KPPS,, 25,, 35 Plug Plug Width across flats 17 Width across flats 17 ( ) ( ) Width across flats 14 arb fitting Width across flats 14 arb fitting KPPS- KPPS- S Piping port location Remark: Switching between the plug and barb fitting allows for vertical piping installation use. 40, 60, 80 Plug Width across flats 17 KPPS- KPPS-25 KPPS- KPPS S Piping port location.5 64 Remark: Switching between the plug and barb fitting allows for vertical piping installation use. (With plug) 32 Width across flats 36 ( ) Width across flats 14 ( ) Width across flats 22 arb fitting KPPS-40 KPPS- 40 S Piping port location Remark: Switching between the plug and barb fitting allows for vertical piping installation use. 743 KPPS-60 KPPS S Piping port location Remark: hanging the location of the plug allows for vertical pipe installation use
17 imensions of KPLS (mm) KPLS 6, 8, ( ) Plug Width across flats 17 arb fitting KPLS-6 KPLS-8 KPLS- X Y 6 8 S size KPLS-24 KPLS Oval KPLS-4 4 KPLS KPLS Remark: Switching between the plug and barb fitting allows for vertical piping installation use ( ) Plug Width across flats 17 arb fitting Oval KPLS-4 KPLS-5 KPLS-6 KPLS-8 KPLS-4 KPLS-5 KPLS-6 KPLS-8 X Y S size 42.5 VUUM PS Remark: Switching between the plug and barb fitting allows for vertical piping installation use. 744
18 imensions of Rubber Mounting Portion (mm) KP-2 KP-3.5 KP-24 KP-3.57 KP-6 KP-8 KP- KP- KP- hamfer not allowed KP-1 KP-25 KP- KP-35 KP-40 KP- KPL-48 KPL-6 KPL-246 KP-2 KPL KP-60, 80 KPP-95, 0 KP-10 type external snap ring Nominal O-ring 745
19 imensions of Rubber Mounting Portion (mm) KPP KPP-, KPP-35 KPP-40, VUUM PS 746
20 Handling Instructions and Precautions Vacuum Piping To reduce piping resistance, keep the piping as short and straight as possible, and avoid use of spiral piping. Replacement of rubber When replacing the rubber, refer to the dimensions of rubber mounting portion to remove the rubber, screw, and mounting body, etc., and then replace the rubber. When assembling the mounting body to rubber KP- to KP-40, slowly screw the mounting screw to assemble the mounting body and rubber. To securely tighten, rotate the mounting screw by one-half turn (180 ) further after they are closely contacted. Note that the rubber mounting screw differs for each rubber size, from KP- to KP-. For details, see imensions of Rubber Mounting Portion. (For details,consult us.) General precautions 1. Use one vacuum for one micro ejector unit. Use of two or more vacuum s could result in picking errors, and extend the amount of time required to reach the set vacuum level. Mounting position In principle, use perpendicular lifting, and avoid slanted or parallel lifting if at all possible. If such an application cannot be avoided, ensure adequate safety margins. (For details, see p.6) 2. When connecting piping to the spring type vacuum with mounting body, be careful to avoid applying excessive force to the body, as it could result in defective spring operation or in wear on moving parts. Tightening torque Storage 1. The vacuum (including rubber ) uses various kinds of rubber. The rubber can deteriorate due to direct sunlight, oil, water, and ozone, etc. efore use, always store it indoors, sealed in a polyethylene bag. 2. Maintain the storage temperature at room temperature. 3. Limit storage to two years from the date of manufacture. When mounting a vacuum, use the values in the table to the right for the nut tightening torque. Thread Tightening torque N [inlbf] KPHF M.5 29 [2.57] KPHF-6, 8 M [6.11] KPHF-, M [6.11] KPHF-25, M [13.0] KPHF-35 M [60.7] KPHF-600 M [521] KPVF M [.4] KPVF-6, 8 M [.4] KPVF- M [60.7] KPVF-25 M [191] KPPF- M [78.2] KPPF-60, 80 M [521] KPPF- ll types M [52.0] KPHS M.5 59 [5.22] KPHS-6, 8 M [60.7] KPHS- M [78.2] KPHS-25 M [113] KPHS-600 M [1736] KPVS M [17.3] KPVS-6, 8 M [17.3] KPVS- M [78.2] KPVS-25 M [113] KPPS- M [260] KPPS-60, 80 M [2604] KPLS- ll types M [113] 747
TUBES CONTENTS ACCESSORIES GENERAL CATALOG AIR TREATMENT, AUXILIARY, VACUUM, AND FLUORORESIN PRODUCTS. Caution TUBES
ACCESSORIES GENERAL CATALOG AIR TREATMENT, AUXILIARY, VACUUM, AND FLUORORESIN PRODUCTS CONTENTS Nylon Tubes, 489 Soft Nylon Tubes, 490 Urethane Tubes, 491 Flat Tubes,, Handling Instructions and Precautions
More informationMANIFOLD REGULATORS CONTENTS ACCESSORIES GENERAL CATALOG AIR TREATMENT, AUXILIARY, VACUUM, AND FLUORORESIN PRODUCTS. Caution MANIFOLD REGULATORS
CCESSORIES GENERL CTLOG IR TRETMENT, UXILIRY, VCUUM, ND FLUORORES PRODUCTS MNIFOLD REGULTORS MNIFOLD REGULTORS CONTENTS Features, Flow Rate Characteristics 115 Specifications, Port Size 116 Inner Construction,
More informationProduct series extended even more! Non-rotating Type. Offers 3 types of non-rotating operation types. push type cylinders. pull type cylinders
The Pen Cylinder s compactness and easy handling make production lines in a broad range of industries. new release with even lighter weight and more PEN CYLINDERS Product series extended even more! The
More informationSLIDE TABLES CONTENTS
CAD drawing data catalog is available. ACTUATORS GENERAL CATALOG SLIDE TALES CONTENTS Features 979 Safety Precautions, Handling Instructions and Precautions 981 Specifications 985 Order Codes 986 Inner
More informationAir Valve AIR-PILOTED VALVES
K-UV002 Ver.1.0 ir Valve I-ILOTED VLVES INSTUCTI MNUL Ver.1.0 ir-piloted Valves Features Since the unit requires air piping only, with no need for electrical wiring, it can be handled by a person without
More informationMULTISTAGE MICRO EJECTORS CONTENTS ACCESSORIES GENERAL CATALOG AIR TREATMENT, AUXILIARY, VACUUM, AND FLUORORESIN PRODUCTS. Caution
ACCESSORIES GENERAL CATALOG AIR TREATMENT, AUXILIARY, VACUUM, AND FLUORORESIN PRODUCTS MULTISTAGE MICRO EJECTORS CONTENTS MED07-E, MED10-E Series Specifications 715 Order Codes 716 Operation Principle
More informationSUPPLY JOINTS CONTENTS
ACCESSORIES GENERAL CATALOG AIR TREATMENT, AUXILIARY, VACUUM, AND FLUORORESIN PRODUCTS CONTENTS Specifications, Order Codes, Size Table 371 Dimensions 373 NCU Specification Order Codes, Model Table 379
More informationSOLENOID VALVES SERIES
VALVES GENERAL CATALOG SOLENOID VALVES SERIES INDEX Features 133 Basic s and Configuration 133 Specifications 13 Solenoid Valve Order s 137 Manifold Order s 138 Operating Principles and Symbols 139 Dimensions
More informationACTUATORS GENERAL CATALOG
CAD drawing data catalog is available. ACTUATORS GENERAL CATALOG ROTARY ACTUATORS VANE TYPE SERIES CONTENTS RAN (Standard Type) Basic Model and Configuration 259 Specifications 26 Order Codes 264 Dimensions
More informationVacuum Pads for Heavy Duty Material Handling thread Lateral vacuum entry. ø50 ø63 ø80 ø100 ø K K K K K K.
Pads for Heavy Duty Material Handling Series T/ Ideal for heavy weight material or objects with a large surface area Examples: CRT, Car body Pad diameters Pad materials Variations Style Series T Vertical
More informationRod end male thread. With rubber bumper 056(9/16") 075(3/4") 106(1 1/16") 150(1 1/2") 250(2 1/2") 300(3")
T.ID0-1 New ompact ylinder Series NQ8 ore size: 06(9/16 ),(/ ),106(1 1/16 ),(1 1/ ) 00( ),0( 1/ ),00( ),00( ) Now available in 00 ( ) and 00 ( ) bore sizes Standard type ctuation Style uilt-in magnet Rod
More informationSeven Features of the Koganei Vacuum Valve
Seven Features of the Koganei Valve Koganei Original Solenoid Construction No burning damage to solenoid No need to stock solenoids as spare parts. Starting and energizing current values are extremely
More informationMICRO EJECTORS. Micro ejector single unit (without solenoid valve) ME. Micro ejector with solenoid valve DC24V. Block-off plate ME MA-BP
Micro Ejector Order Codes Manifold Order Codes Micro ejector single unit (without solenoid valve) ME Body model nozzle diameter : Maximum flow rate on vacuum side 03 0.3 : 3.0R/min. [0.012in., 0.106ft.
More informationSeries MK ø12, ø16, ø20, ø25, ø32, ø40, ø50, ø63
otary lamp ylinder/standard Series MK ø, ø, ø, ø, ø, ø, ø5, ø ow to Order MK 1 3 S otary clamp cylinder Mounting Symbol Style ore size Through hole & both ends tapped (Standard) ø, ø oth ends tapped Through
More informationHigh Power Cylinder. Series RHC. ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100 REA REB REC C Y C X MQ RHC RZQ. Individual
High Power ylinder Series RH ø, ø, ø, ø, ø, ø3, ø, ø RE RE RE Y X RH D- -X -X High power cylinder: Smooth cushioning for high speed operation (3 low/medium speed operation with heavy loads The capacity
More informationHow to Order. Nil M. Action S T. Load voltage Wiring. M9NV 5 V, 12 V 3-wire (PNP) M9PV 12 V. F9NWV 5 V, 12 V 3-wire (PNP) F9PWV
ompact ylinder: Standard Type Single cting, Single Rod, Spring Return/Extend Series QS ø, ø, ø, ø How to Order QS S QS S FWV S uilt-in magnet Mounting style Through-hole/oth ends tapped common (Standard)
More informationMAGNET TYPE RODLESS CYLINDERS SERIES CONTENTS
CD drawing data catalog is available. CTUTORS GENERL CTLOG MGNET TYPE RODLESS CYLINDERS SERIES CONTENTS Features 59 MRC Series Specifications 6 Order Codes 6 Inner Construction, Major Parts and Materials
More informationRotary Actuated Air Gripper
Rotary ctuated ir Gripper MHR, MDHR/MHR3, MDHR3 -finger type: Size, 15,, 3/ 3-finger type: Size, 15 High Precision - Repeatability ±.1 mm Parallel opening and closing mechanism utilizing a cross roller
More informationSOLENOID VALVES. HEB series SOLENOID VALVES EA, EB SERIES. (2, 3-port pilot type solenoid valves) 53mm. 10mm
SOLENOID VALVES HEB series (2, 3-port pilot type solenoid valves) SOLENOID VALVES EA, EB SERIES 53mm 10mm 120 HEB SERIES SPECIFICATIONS Specifications Basic Models and Functions Item Basic model Number
More informationCompact Cylinder: Standard Type Double Acting, Single Rod. How to Order 30 D F9BW. Body option <Standard stroke> Nil C M. Double acting.
Compact Cylinder: Type Series ø, ø, ø, ø How to Order Without auto switch D With auto switch CDQS D FW S Number of auto switches L F G D, uilt-in magnet Mounting style Through-hole/oth ends tapped common
More informationMULTISTAGE MICRO EJECTORS
MULTISTAGE MICRO EJECTORS MED07-E, MED10-E Specifications Basic model Item Media Operating pressure range MPa [psi.] Proof pressure MPa [psi.] Operating temperature range (atmosphere and media) C [ F]
More informationSOLENOID VALVES, SERIES
VALVES GENERAL CATALOG SOLENOID VALVES, SERIES INDEX Features 103 Product Range 104 Handling Instructions and Precautions 105 EA Series Specifications 109 Order Codes 113 Dimensions 116 EB Series Specifications
More informationELECTRO-PNEUMATIC TRANSDUCING REGULATORS CONTENTS ACCESSORIES GENERAL CATALOG AIR TREATMENT, AUXILIARY, VACUUM, AND FLUORORESIN PRODUCTS.
CCESSORIES GENERL CTLOG IR TRETMENT, UXILIRY, VCUUM, ND FLUORORESIN PRODUCTS ELECTRO-PNEUMTIC TRNSDUCING REGULTORS CONTENTS ETR Series Features, Operation Principle 237 pplication Examples 238 Handling
More informationMini Free Mount Cylinder
Mini Free Mount Cylinder Series ø, ø, ø, ø, ø, ø1, ø Series 1 ction Stroke 1 2 0 0 0 Clean uto switch series None Rod end Male threaded Without thread Solid state switch D-F D-M9 D-M9 W Female threaded
More informationVacuum Pad: Ball Joint Type
Vacuum Pad: all oint Type / eries Pad iameter: ø, ø1, ø, ø,,, ø, ø0 all joint type ideal for adsorption on a slanted work surfaces acaces all joint type ideal for adsorption on a slanted work surfaces
More information9 mm shortened. 11 mm shortened. Vacuum Pad. ZP3 Series. ø1.5 ø2 ø3.5 ø4 ø6 ø8 ø10 ø13 ø16. Overall length is shortened. Space-saving.
Vacuum Pad Series ø1., ø, ø., ø,, ø, ø, ø1, ø16 RoHS Overall length is shortened. In the case of Flat type (Pad diameter: ø) Pad unit Max. 9 mm shortened With adapter Max. 11 mm shortened ctual size ctual
More informationMICRO EJECTORS ME12, ME25, ME60. Specifications. Mass MICRO EJECTORS. Vacuum switches. Micro ejectors. Single and twin solenoid valves.
ME12, ME25, ME60 Specifications Micro ejectors Media Operating pressure range MPa [psi.] Operating temperature range C [ F] Nozzle diameter Note mm [in.] kpa [in.hg] flow rate Note R/min [ft. 3 /min.]
More informationCAT.ES C. Compact Guide Cylinder. SeriesMGP. ø12, ø16, ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100. New end lock type introduced to Series MGP
CT.S-7 C Compact Guide Cylinder Series ø, ø, ø, ø2, ø, ø, ø, ø, ø, ø0 New end lock type introduced to Series . Top mount Compact Guide Cylinder Series ø, ø, ø, ø2, ø, ø, ø, ø, ø, ø0 Four mounting types
More informationAir Suction Filter / In-line Type With One-touch Fittings. Model ZFC ZFC ZFC ZFC ZFC ZFC ZFC ZFC051-03
In-line type air suction filter is used to prevent vacuum equipment trouble from occurring due to dust in the air IN/OUT straight piping Easy installation and removal with one-touch fittings Light and
More informationCompressed air to
G G A S F J 2 N/ S/F Specifications escriptions Cylinder bore size Working fluid mm Max. working pressure MPa Min. working pressure MPa Ambient temperature C Port size Operational stroke length mm Rod
More informationSP30 - BJ - FCF50 - PU
SMART Plungers SP-FCF Series Features Always return back to original position (wide angle 42 ) No need tool for pad replacement Less friction for Level compensator Light weight and long life time Compact
More information25000, 4/2 Direct solenoid actuated poppet valves
> > Port size: /4, /2 > > Working from 0 bar up > > Suited for outdoor installation > > Suitable for vacuum range down.33 0-2 mbar l/s > > : 65, Ex em, Ex d TEX approved (see solenoid table) Technical
More informationVacuum Pad: Large Size Bellows Type
Vacuum Pad: Large Size ellows Type Series ZPT/ZPX ø4, ø5, ø, ø, ø1, ø Z ZX ZR ZM deal for loads with a curved surface, heavyweight loads and loads with large surface area. ZM ZQ Z ZU ZL Z Z ZP SP ZUK MJ
More informationCJ1. Air Cylinder. Double Acting: ø4/single Acting, Spring Return: ø2.5, ø4 CJ1B 4 5 U4. How to Order/Double Acting
Air Cylinder eries CJ1 ouble Acting: ø/ingle Acting, pring Return: ø2., ø eries Variations tandard eries CJ1 eries Action ouble acting ingle acting Mounting style asic style ingle rod ingle rod pring return
More informationCompact Cylinder. With a short overall length, the space saving cylinder helps to make various jigs and equipment more compact.
Compact Cylinder Series CQ ø, ø, ø, ø, ø, ø, ø, ø, ø, ø, ø, ø1, ø With a short overall length, the space saving cylinder helps to make various jigs and equipment more compact. Variations Standard Series
More informationatalog /US Index Vacuum ups Product Selection Technical Lifting orces, up iameters, Material Specifications 6-9 P lat Precision molded single li
Vacuum ups Section 3 Parker annifin orporation ivision atalog 0802-2/US Index Vacuum ups Product Selection Technical Lifting orces, up iameters, Material Specifications 6-9 P lat Precision molded single
More informationSOLENOID VALVES SERIES
VALVES GENERAL CATALOG SOLENOID VALVES SERIES INDEX Features 145 Basic Models and Configuration 145 Specifications 147 Solenoid Valve Order Codes 149 Manifold Order Codes 150 Operating Principles and Symbols
More informationSOLENOID VALVES, SERIES
VALVES GENERAL CATALOG SOLENOID VALVES, SERIES INDEX Features 365 Basic Models and Configuration 366 Solenoid Valve Order Codes 367 Manifold Order Codes 368 112 Series Specifications 369 Operating Principles
More informationStandard Type Dual-Rod Cylinder. ø6, ø10, ø15, ø20, ø25, ø32. How to Order
Standard Type ual-rod ylinder Series ø, ø, ø, ø, ø2, ø32 ompact Type J M L M earing type Slide bearing all bushing bearing How to Order 0 Y7W S Number of auto switches Nil 2 pcs. S pc. n "n" pcs. ore size/standard
More informationRectangular Multi-connector. No. of Connecting Tubes: 10, 20. Plate. Plug connector Socket connector PAT.PEND
Rectangular Multi-connector KDM Series No. of Connecting Tubes: 1, 2 RoHS Multi-connector is effective in saving labor for separate transportation of the panel and the machine, and for exchanging units
More informationCompact Guide Cylinder Series MGQ
Compact Guide Cylinder Series ø, ø, ø, ø, ø, ø, ø, ø, ø, ø0 ir cylinder with guide integrated that has achieved anti-lateral load and high non-rotating accuracy. Space-saving cylinder. Suitable as stoppers
More informationCompact Guide Cylinder
Compact Guide Cylinder Series ø, ø, ø, ø, ø, ø, ø, ø, ø, ø ir cylinder with guide integrated that has achieved anti-lateral load and high non-rotating accuracy. Space-saving cylinder. Suitable as stoppers
More informationPin Cylinder. Series CJP. Double Acting/Single Acting Spring Return. Standard Variation Built-in Magnet. Single Rod. Single Rod Spring return
Pin Cylinder eries ouble cting/ingle cting pring Return Variations eries tandard tyle eries With uto witch ouble cting (Non-lube) ingle cting (Non-lube) ction ingle Rod ingle Rod pring return tandard Variation
More informationSeries MHZJ2. How to Order MHZJ2 16 D F9PV. Body option. Nil. Port. Port
Parallel Type ir Gripper How to Order 1 1 2 Bore size mm 1mm 1mm 2mm mm MHZJ2 1 D F9PV Number of fingers 2 2 fingers D S C ction Double acting Single acting (normally open) Single acting (normally closed)
More informationMinimal Fitting Series
http://www.pisco.co.jp FITTING CONTROLLER VALVE TUE MAKE-TO-ORDER PRODUCTS Ultra-Small arb Fitting for Pneumatic Piping Fitting 266 Suitable for Vacuum Piping by a Combination with Vacuum Tube Suitable
More informationSolenoid Valves HJE Series (2, 3, 5-port pilot type solenoid valves)
Solenoid Valves HJE Series (2, 3, 5-port pilot type solenoid valves) 80mm 12mm 18mm Space Saving Thin and compact size Valve width: 12mm [0.472in.] Valve length: 80mm [3.150in.] Flow Large flow rate with
More informationSeriesMHZL2 How to Order
Parallel Type ir Gripper Long Stroke SeriesMHZL2 How to Order 1 2 2 ore size Number of fingers 2 2 fingers 1mm mm 2mm 2mm MHZL2 D S C ction Double acting Single acting (normally open) Single acting (normally
More informationOpmaak_BVA_Catalog_2007.qxp 4/16/ :32 PM Page 1
Opmaak_V_Catalog_2007.qxp 4/16/2008 12:32 PM Page 1 2008 Opmaak_V_Catalog_2007.qxp 4/14/2008 3:36 PM Page 2 Index Single cting Cylinders 3 Lock-nut Cylinders 6 Threaded Cylinders 7 Flat ody Cylinders 8
More informationSeries MGC ø20, ø25, ø32, ø40, ø50
Compact Guide Cylinder Series MGC ø, ø, ø, ø, ø Linear Transfer Unit with compact guide body and front plate Grease nipple offers easy lubrication for bearings Compact front plate and guide body Space
More informationHigh Power Cylinder. Series RHC. ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100 REA REB REC C Y C X MQ RHC RZQ D- -X
ourtesy of M/Flodyne/Hydradyne Motion ontrol Hydraulic Pneumatic Electrical Mechanical () 46-4 www.cmafh.com High Power ylinder ø, ø, ø3, ø4, ø, ø, ø, ø 33 RE RE RE Y X RH ourtesy of M/Flodyne/Hydradyne
More informationPneumatic Quick Couplings
Pneumatic Quick ouplings -1 maku GmbH & o. KG 73630 Remshalden Telefon (0 71 51) 7 26 26 Telefax (0 71 51) 7 42 01 www.maku-industrie.de Pneumatics Pneumatic Quick ouplings Single Shut-Off ouplings Single
More informationInstrument Ball Valves
www.swagelok.com Instrument all s 40 Series On-off, switching, and crossover flow paths Working pressures up to 3000 psig (206 bar) Temperatures from 50 to 150 (10 to 65 ) Low-temperature service option
More informationSHOCK ABSORBERS CONTENTS
CAD drawing data catalog is available. ACCESSORIES GENERAL CATALOG AIR TREATMENT, AUXILIARY, VACUUM, AND FLUORORESIN PRODUCTS CONTENTS Series Introduction Handling Instructions and Precautions Linear Orifice
More informationSolenoid Valves JC, JE Series
Easy-to-use, simple construction valves! Suitable for various needs and offering high-performance control, while achieving still lower power consumption, quicker response, and a larger flow rate! Solenoid
More informationPneumatics Pneumatic Quick ouplings Single Shut-Off ouplings Single Shut-Off couplings are primarily used for pneumatic applications, connecting air t
Pneumatic Quick ouplings Pneumatics -1 Quick oupling ivision Pneumatics Pneumatic Quick ouplings Single Shut-Off ouplings Single Shut-Off couplings are primarily used for pneumatic applications, connecting
More informationP. R2...P. Two. have. become. Range of Pressure-Independent Control Valves. one
P. R2...P Two have become Range of Pressure-Independent Control alves one The pressure-independent control valve R2 P sets new standards The challenge Energy savings with maximum convenience and low installation
More informationMicro 3-port Solenoid Valve 005 Series
Catalog No.BK-030 RoHS compliant product Micro 3-port Solenoid Valve 005 Series World's smallest! Valve width 5.9 mm [0.232 in], effective area 0.1 mm 2 [Cv 0.006], ultra compact 3-port solenoid valves!
More information10 million cycles. Improved durability. Shock Absorber/Soft type. RJ Series. Maximum operating cycles M6, M8, M10, M14, M20, M27
Shock Absorber/Soft type Series M, M, M, M, M, M Improved durability RoS Long-term continuous operation has been realized by employing the pre-load mechanism, newly-developed oil seals. Maximum operating
More informationSPEED CONTROLLERS WITH QUICK FITTINGS
SPEED CONTROLLERS WITH QUICK FITTINGS Union Straight Type Fittings for controlling the speed of actuators, such as cylinders. Superior flow rate characteristics and fine tuning adjustments in the low flow
More informationVacuum Cups. Styles. Cup material Nitrile Silicon Urethane Material code NBR SI U Operating temperature ( C) -60 to ±5 55 ±5 55 ±5
atalog PN1000-2US Vacuum ups P ellows Vacuum ups These s are for curved, corrugated, lightly textured surfaces and flexible product. Under vacuum, the bellow will collapse on contact and lift the product
More informationMULTIMOUNT CYLINDERS FOR VACUUM PADS
MULTIMOUNT CYLINDERS FOR VACUUM DS These devices preserve the multimount cylinder design concept while employing a hollow rod structure to keep total length very short. Furthermore, all the piping is concentrated
More informationMiniature Fittings Series M
Miniature Fittings Series M pplicable Tubing: Ø 3.2, Ø 4, Ø 6 onnection Thread:, M, arb onfiguration for easy insertion into the tube Holds the tube tightly ody With electroless nickel plated Low tightening
More information4-Way, 5-Port, 2 & 3-Position Solenoid and Remote Pilot 1/2" & 3/4" Ports. Technical & Service Data. Pneumatic
atalog VL-UTO-/US (Revised 6/0/0) pplication & Model Selection S utomotive Subbase Valves -Way, -ort, & -osition Solenoid and Remote ilot /" & /" orts pplication ual pressure or diverter valve operation
More informationHow to Order D 30 D M9BW. Made to Order Specifications Bore size Number of. Rod end configuration Cylinder stroke (mm) Nil
With auto switch RSG RSDG With auto switch (uilt-in magnet) uilt-in Magnet Cylinder Model If a built-in magnet cylinder without an auto switch is required, there is no need to enter the symbol for the
More information3 Position Cylinder. RZQ Series. Provides intermediate stop mechanism. ø32, ø40, ø50, ø63. 2-stage stroke enabled with a small increase in length
Position ylinder Series ø, ø, ø, ø Provides intermediate stop mechanism 2-stage stroke enabled with a small increase in length Overall length of cylinder tube DQ2 Full stroke First-stage stroke dditional
More informationSeries variation. Speed control valve SC* For 2.5 to 450 cylinders. * Refer to page 854 for line type.
Series variation Model / appearance Miniature speed Miniature in out control valve Direct piping / elbow type Model no. SM SM SDM SDM SRM SR SR Port size (Rc or R) S* For. to cylinders pplicable tube O.D.
More information4 Port Solenoid Valve
Port Solenoid Valve Rubber Seal Direct Operated Poppet Type Unprecedented high speed, with stable response times ON: ms, OFF: ms, Dispersion accuracy ±1 ms ( at a supply pressure of 0. MPa) (Use clean
More informationSeries MGP. Compact Guide Cylinder. New end lock type introduced to Series MGP. ø12, ø16, ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100
Compact Guide Cylinder Series ø, ø, ø, ø2, ø, ø, ø, ø, ø, ø0 New end lock type introduced to Series.22- CL MLG CN CNG MNB CNS CLS CB CV/MVG CXW CXS CXT MX MXU MXH MXS MXQ MXF MXW MXP MG MGQ MGG MGC MGF
More informationTECHNICAL. AVAILABLE UPON REqUEST CHAPTER CONTENTS. Optical comparator: For process control during serial production.
TECHNICAL INFORmATION INFORmATION ABOUT CV / RE AVAILABLE UPON REqUEST Optical comparator: For process control during serial production. Engineering: Development and design using the latest CAD systems.
More informationXL Series. High Vacuum Angle Valve
High Vacuum ngle Valve X Series N ight weight and compact Uniform baking temperature High fluorine resistance ow outgassing ittle heavy metal contamination Series X High Vacuum ngle Valve ight weight &
More informationFree Mount Cylinder. Series. Series CU CAT.EUS20-95 B -UK. Space-saving. Auto Switch Capable P. 4, 23, 37 P. 45 P. 43
CAT.EUS- B -UK Free Mount Cylinder A space-saving air cylinder with multiple surfaces capable of direct mounting. Offered in many variations. Space-saving The multiple surface direct mounted rectangular
More informationMICRO EJECTORS CONTENTS
CAD drawing data catalog is available. ACCESSORIES GENERAL CATALOG AIR TREATMENT, AUXILIARY, VACUUM, AND FLUORORESIN PRODUCTS CONTENTS GME05, GME07, GME10 Series Featrues 679 Specifications 680 Order Codes
More informationPin Cylinders. Series CJP2/CJP. 2 auto switches can even be mounted on a cylinder with ø4 bore size (5 mm stroke). One-touch fitting can be connected.
Pin ylinders eries JP/JP auto switches can even be mounted on a cylinder with ø ( mm stroke). uto switch One-touch fitting can be connected. (Panel mount type) ø One-touch fitting, miniature fitting, and
More informationSeries XLS. Electromagnetic Type Bellows Pressure Balance XLS 25 5 G XLS 25 P 1 G. High Vacuum Angle Valve. Without control power supply
High Vacuum ngle Valve Series XLS Electromagnetic Type ellows Pressure alance How to Order Starting voltage 5 24 V 9 Other (48 V, 00 V ) Note) Holding voltage is 25% of starting voltage. Electrical entry
More informationLubricator Series Functional explanation / Dimensions
00E/00E Series Lubricator / utofill type Only installing oil tank enables lubrication to multiple lubricator. : Rc/ to Rc JIS symbol ir uto. drain Specifications escriptions 00E///V 00E/8V ompact lean
More informationSOLENOID VALVES SERIES
CD drawing data catalog is available. VLVES GENERL CTLOG SOLENOID VLVES SERIES INDEX Features 293 Basic Models and Configuration 29 1 Series Specifications 297 Cylinder Operating Speed and Flow Rate 299
More informationMULTI SLIDERS CONTENTS
CAD drawing data catalog is available. ACTUATORS GENERAL CATALOG CONTENTS Features 923 Handling Instructions and Precautions 925 Specifications 929 Order Codes 930 Inner Construction 931 Dimensions 932
More informationACTUATORS GENERAL CATALOG
CAD drawing data catalog is available. ACTUATORS GENERAL CATALOG ROTARY ACTUATORS PISTON TYPE SERIES CONTENTS Features 1223 Specifications 1224 Inner Construction, Major Parts and Materials 1226 Order
More informationAir Suction Filter. Series ZF. Prevent from occurring vacuum equipment trouble due to dust from vacuum pad ZFA ZFB ZFC
Air Suction Filter Series ZF Prevent from occurring vacuum equipment trouble due to dust from vacuum pad Series ZFA ZF Universal joint type Features Long maintenance cycle type (Large filter surface) Adaptable
More informationSOLENOID VALVES 300 SERIES INSTRUCTION MANUAL
BK-UV Ver.1. Air Valve SOLENOID VALVES SERIES INSTRUCTION MANUAL Ver.1. 1 Handling Instructions and Precautions Terminal connector Non-locking type To operate the manual override, press it all the way
More informationKNOCK CYLINDERS CONTENTS ACTUATORS GENERAL CATALOG. Caution KNOCK CYLINDERS
CAD drawing data catalog is available. ACTUATORS GENERAL CATALOG CONTENTS Features/Introductions of Variations 79 Double Acting Type Specifications 81 Order s 82 Inner Construction and Major Parts 83 Dimensions
More informationCompact Hydraulic Cylinder
ompact Hydraulic ylinder Series HQ HQ Series HQ HK HN HM HS H2 H Nominal pressure:. MPa ore size :,,,,,, . MPa ompact Hydraulic ylinder Double cting/single Rod Series H Q ø, ø, ø, ø, ø, ø, ø With uto Switch
More informationQuick Coupling Products
Quick oupling Products atalog 3800 US February 2005 The World Standard Parker Locations Minneapolis, Minnesota rantsburg, Wisconsin Lincoln, Nebraska hetek, Wisconsin FILURE OR IMPROPER SELETION OR IMPROPER
More informationNAAMS Standards Compliant Power Clamp Cylinder ø50, ø63
NORMTON NMS Standards ompliant Power lamp ylinder ø5, ø6 Weight reduced by up to 8% luminum body with greatly reduced weight Suitable for robot material handling ore size KZ2N a New KZN-X2742 Reduction
More informationPneumatic rotary drive
Pneumatic rotary drive Modular program for mounting of quarter turn valves such as ball valves and butterfly valves NMUR and ISO 5211 interfaces Position feedback (including Ex-Versions) Type 2051 can
More information10%lighter. 1.7 kg. 1.9 kg. Air Cylinder. New. Weight. Reduced weight by changing the shape of the rod cover and head cover. Series MB1 CAT.
ir ylinder ø32, ø40, ø50, ø63, ø80, ø100, ø125 New RoS Weight (ø50-100 stroke) 10%lighter Existing model 1.9 kg New Series M1 1.7 kg Reduced weight by changing the shape of the rod cover and head cover.
More information4 Port Solenoid Valve
Port Solenoid Valve Rubber Seal Direct Operated Poppet Type Unprecedented high speed, with stable response times ON: ms, OFF: ms, Dispersion accuracy ±1 ms ( at a supply pressure of 0. MPa) (Use clean
More informationCAT.ES20-53 E. Dual-Rod Cylinder. Series CXS. CXS Dual-Rod Cylinder with Air Cushion Compact Type Series CXSJ. New:
CAT.ES-3 E Dual-Rod Cylinder Series New: Dual-Rod Cylinder with Air Cushion Compact Type Series J Dual-Rod Cylinder with guide function for pick-and-place applications Series! Twice the thrust Non-rotating
More informationSine Cylinder. REC Series. ø20, ø25, ø32, ø40. Allows high speed transfer of work with dramatically reduced shock/impact. REA REB REC Smooth
Sine Cylinder Series,,, llows high speed transfer of work with dramatically reduced shock/impact. RE RE RC Velocity curve Time Sine cylinder Current cylinder Sine Cylinder Series,,, llows rapid transfer
More informationPlatform Cylinder. ø12, ø16, ø20, ø25, ø32, ø40. Series CXT 12 CXT 16 CXT 20 CXT 25 CXT 32 CXT 40
Platform Cylinder Series ø, ø, ø, ø, ø, ø highly rigid and highly accurate slide table integrated with an actuator. Two styles of guide rod bearings to accommodate your application For heavy loads all
More informationMax. Operating Pressure. Group 1
HK Series (Steel) Hansen s HK Series coupling sets the industry standard for couplings. The HK Series features a rugged ball latch mechanism with automatic self-sealing poppet valves in a wide array of
More informationMechanical Style Pressure Switch. Specifications
or details about certified products conforming to international standards, visit us at www.smcworld.com. Mechanical Style Pressure Switch Series IS1000 Long service life: 5 million cycles IS1000-01 IS1000-01-X202
More informationComponents for air preparation and pressure adjustment. OUT port position ( ) connected Rear side. of IN port. Air tank. directly.
Components preparation and pressure adjustment P ir Refrigerating ir Overview ir P is a component that enables boosting by s only up to twice primary pressure (.0MPa max.) in combination with using air
More informationPrecision Cylinder. MTS Series. ø8, ø12, ø16, ø20, ø25, ø32, ø40 MXH MXS MXQ MXQ MXF MXW MXJ MXP MXY MTS D- -X. Series Variations MTS8
Precision Cylinder Series, ø, ø6, ø, ø, ø, ø MXS Series Variations Model 8 Standard stroke (mm) 7 7 Rod end configuration Cushion Rubber bumper End lock Made to Order Rod Variable stroke/ through-hole
More informationVacuum Technology. Catalogue PDE2507TCUK-ab. Convum
Vacuum Technology atalogue P2507TUK-ab onvum Global Pneumatics This icon can be found next to products that are widely supported by Parker Pneumatics worldwide manufacturing and sales network. When you
More informationTubing. Barb. Sleeve. Attaching the sleeve achieves a larage retaining force. Detaching it allows easy removal of the tube. Electroless nickel plated
iniature Fittings Series pplicable Tubing: ø2 onnection Thread:, RoHS ade to Order (Refer to page 9 for details.) pplicable O.D. x I.D.: ø2 x ø.2 onnection thread: / One-touch fitting size: ø.2 / ø Tubing
More informationMHR3/MDHR3 Series. Rotary Actuated Air Gripper/3-Finger Type. Size: 10, 15 MDHR 3 10 R M9N S. How to Order. Without auto switch
Rotary ctuated ir Gripper/3-Finger Type MHR3/MDHR3 Series Size:, 1 How to Order Without auto switch MHR 3 R Connecting port R ody side R: ody side Port With auto switch (uilt-in magnet) MDHR 3 R M9N S
More informationLight Coupling Series
http://www.pisco.co.jp FITTING ONTROLLER VALVE TUE MAKE-TO-ORDER PRODUTS Push-In Fitting oupling Light oupling 342 oupling with Push-In Fitting. Easy oupling and Uncoupling with One-Hand Operation. Suitable
More informationPower Clamp Cylinder
ower lamp ylinder onforming to the ew S Standard Series Z2 ompliant ew Special /()U or rance ZR or urope ZT or orth merica Z2 2T/2/ () or sia 2 55 Toggle link mechanism aintains secure and powerful support.
More informationAir Slide Table Series MXP
ir Slide Table Series XP ø, ø, ø, ø, ø1 X XU XS X XF X X XP XY TS - -X Individual -X 19 igh rigidity, igh precision Cylinder is built into the rail of the linear guide. aterial of body and guide block
More information