Series MGC ø20, ø25, ø32, ø40, ø50

Size: px

Start display at page:

Download "Series MGC ø20, ø25, ø32, ø40, ø50"

Vivian Moody
5 years ago
Views:

Compact Guide Cylinder Series MGC ø, ø, ø, ø, ø Linear Transfer Unit with compact guide body and front plate Grease nipple offers easy lubrication for

possible at the highspeed stroke end. Light weight Weight 28% (In comparison with series MGG ) Models without rear plate are available.

1 Compact Guide Cylinder Series MGC ø, ø, ø, ø, ø Linear Transfer Unit with compact guide body and front plate Grease nipple offers easy lubrication for bearings Compact front plate and guide body Space saving Length % Height 18% (In comparison with series MGG ) ir cushion is standard Impact absorption is possible at the highspeed stroke end. Light weight Weight 28% (In comparison with series MGG ) Models without rear plate are available. CL MLGC CN C CV/MVG CXW CXS CXT MX MXU MXS MXQ MXF MXW MXP MG MGP MGQ MGG MGC MGF CY1 MY1 Made to Order Refer to p for Made to Order specifications of series MGC. 3.-1

2 Guide cylinder (Compact style) F size mm mm mm mm mm Compact Guide Cylinder Series MGC ø, ø, ø, ø, ø M L MGC L 100 R C73 S earing Slide bearing all bushing bearing Mounting asic Front flage Yes No YesNo Yes Cylinder stroke uto switch *Refer to following Stroke Table. Without auto switch (uilt-in magnet) *Refer to following uto Switch Specifications. pplicable uto Switches/Refer to p for further information on auto switch. Style Reed switch Solid state switch Special function Diagnostic indication (2 color) Grommet Diagnostic indicaiton (2 color) Electrical entry Grommet Connector Grommet Connector Water resistant (2 color) Grommet With timer With diagnostic output (2 color) Latch with dianostic output (2 color) How to Order Indicator Yes Wiring (Output) 3 wire(equiv. NPN) 2 wire 3 wire(npn) 3 wire(pnp) 2 wire 3 wire(npn) 5V, V 3 wire(pnp) 24V 2 wire V 3 wire(npn) 4 wire(npn) 24V Load voltage DC C 5V V 5V, V V 100V 100V, 0V 0V or less 100V or less 5V, V 24V or less 5V, V V 5V, V uto switch model Electrical entry direction In-line C76 C C C73C CC 59W H71 H72 H7 H7C H7NW H7PW H7W H7 G5NT H7NF H7LF G59 G5P K59 G59W G5PW K59W G5 *Lead wire length 0.5m (Example) C 5m Z (Example) CZ 3m Z (Example) CL N (Example) CN * : Manufactured upon receipt of order G59F Prependicular C C G79 K79 K79C Number of auto switches S n Rear plate R Lead wire * (m) 0.5 ( ) 3 (L) 5 (Z) 2 1 n Without rear plate With rear plate (N) pplicable load IC IC IC IC IC IC Relay, PLC PLC Relay PLC Relay PLC Stroke Model MGCM MGCL earing Slide bearing all bushing baering size Standard stroke 75, 100, 1, 1, 0 75, 100, 1, 1, 0, 0, 0 *Short stroke or intermediate stroke(except above stroke): Manufactured upon receipt of order Long stroke 0, 0, 3, 0 3, 0, 4, 0 3, 0, 4, 0, 0 3, 0, 4, 0, 0, 700, 0 3, 0, 4, 0, 0, 700, 0, 900,

Compact Guide Cylinder Series MGC JIS Symbol Order Made Made to Order Refer to p.5.4-1 regarding made to order of series MGC. Specifications ction Fluid Proof pressure Max. operating pressure Min.

3 Compact Guide Cylinder Series MGC JIS Symbol Order Made Made to Order Refer to p regarding made to order of series MGC. Specifications ction Fluid Proof pressure Max. operating pressure Min. operating pressure mbient and fluid temperature Piston speed Cushion Lubrication Thread tolerance Stroke tolerance Performance of non-rotation Slide bearing Expect for bending of guide rod all bush bearing Port size Model ase cylinder size MGC CDGI CDGI CDGI CDGI CDGI llowable Kinetic Energy by ir Cushion Mechanism size M Ek = n 2 2 EK M n ±0.07 ±0.06 M5 X 0.8 MGC ±0.06 ±0.05 Effective cushion length R: 7.0, H: 7.5 R: 7.0, H: MGC Double acting ir ±0.06 ±0.04 Rc(PT)1/8 MGC 1.5MPa 1.0MPa 0.MPa (t horizontal non-load) 10 to+ C to 7mm/s ir cushion Non-lube JIS class mm : Kinetic energy (J) : Weight of load (kg)+weight of moving section (kg) : Piston speed (m/s) ±0.05 ±0.04 OUT Theoretical Force size Piston rod Operation Piston area Operating pressure (MPa) dia. direction (mm 2 ) OUT OUT OUT OUT OUT IN IN IN IN IN Note) Theoretical force(n)=pressure(mpa) X Position area(mm 2 ) MGC ±0.04 ±0.04 Rc(PT)1/4 R: Rod side, H: Head side bsorbable kinetic energy (J) R: 0.35, H: 0.42 R: 0.56, H: High kinetic energy generated by large loads and high speed operations can be absorbed by compressing air at the stroke end thus preventing shock and vibration being transmitted to the machine. If the kinetic energy is within the range of the table above, the life of the cushion packing can be expected to exceed a million operations. The air cushion has not been designed to control the piston speed in the end regions of the stroke. The load kinetic energy can be obtained by the following equation: IN Unit: N CL MLGC CN C CV/MVG CXW CXS CXT MX MXU MXS MXQ MXF MXW MXP MG MGP MGQ MGG MGC MGF CY1 MY1 3.-3

Series MGC Weight (kg) Standard weight size asic Front flange earing Slide bearing weight all bushing bearing dditional weight with rear plate dditional weight per stroke ddtional weight with long

4 Series MGC Weight (kg) Standard weight size asic Front flange earing Slide bearing weight all bushing bearing dditional weight with rear plate dditional weight per stroke ddtional weight with long stroke Calculation example: MGCL-0-R (asic/all bushing bearing, Rear plate, ø/0st) asic weight 2.46 (asic type) earing weight 0.28 (all bush bearing) dditional weight with rear plate 0.33 dditional weight for stroke 0./ stroke Stroke 0 stroke dditional weight for long stroke X 0/+0.02=5.59kg Weight (Moving Parts) (kg) size Weight of moving parts dditional weight per stroke dditional weight with rear plate Calculation example: MGCL-0-R Standard weight of moving parts 0.75 dditional weight with rear plate 0.33 ddtional weight for stroke 0./ stroke Stroke 0 stroke X 0/=2.68kg Precautions e sure to read before handling. Refer to p.0-39 to 0-46 for Safety Instructions and common precautions. Warning Handling q Installing a protective cover (In case of rear plate) During mounting, handling and operation, the rear plate makes reciprocating movements. Therefore, pay careful attention not to insert your hand, etc., between the cylinder and the rear plate. When you are going to fit this product to the outside of your equipment, take preventative measures such as installing a protective cover. Caution Mounting/djustment q Pay attention so that no scratch or dent will be given to the slide part of the guide rod. Otherwise, faulty operation and dropping of durability may occur. w When fitting the guide body, use the guide body which has high flatness of the fitting surface. If the guide rod has twisted, operation resistance will become abnormally higher and the bearing will wear at an early stage, thereby resulting in poor performance. e llow an ample space around the cylinder so that no obstruction will occur for checking and maintenance. r Do not adjust the rod stroke by moving the rear plates, as doing so will cause the rear plates to come into direct contact with the guide body or the bracket mounting bolt. The resulting impact cannot be absorbed easily, the stroke position cannot be maintained, and faulty operation may result. t Lubrication The bearing can be used in an oilless state, but when you are going to oil the bearings, do so by using a ball-cup so that no foreign matter will be mixed. For the grease, we recommended using high-quality lithium soap-based grease No

Compact/Guide Cylinder Series MGC llowable Eccentric Load Slide bearing/ MGCM - Stroke -R all bushing bearing/ MGCL - Stroke -R ir-hydro Low hydraulic pressure cylinder under 1.

pneumatic equipment such as a valve. MGCH Specifications size ction Fluid Proof pressure Max. operating pressure Min.

5 Compact/Guide Cylinder Series MGC llowable Eccentric Load Slide bearing/ MGCM - Stroke -R all bushing bearing/ MGCL - Stroke -R ir-hydro Low hydraulic pressure cylinder under 1.0MPa Through the concurrent use of a CC Series air-hydro unit, it becomes possible to operate at a constant or low speed or to effect an intermediate stop, just like a hydraulic unit, while using pneumatic equipment such as a valve. MGCH Specifications size ction Fluid Proof pressure Max. operating pressure Min. operating pressure Piston speed Cushion mbient and fluid temp Thread tolerance Stroke tolerance Mounting earing Mounting size Stroke Rear plate ir-hydro style Refer to p.3.-3 regarding other specifications. Possible to mount an auto switch. rrange so that maximum load will be % for theoretical force of ø, % for ø, 55% for ø and % or less for ø, respectively. ø, ø, ø, ø, ø Double acting Turbine oil 1.5MPa 1.0MPa 0.18MPa (t horizontal non-load) to 0mm/s +5 to + C JIS class mm asic Front flange Copper Free To prevent the generation of copper ions, in order to eliminate any influences of copper ions or fluororesins on color CRTs, copper materials have been nickel plated or replaced with copper-free materials. -MGC Copper free Specifications size ction Fluid Max. operating pressure Min. operating pressure Cushion Piston speed Mounting rrange so that maximum load will be % for theoretical force of ø, % for ø, 55% for ø and % or less for ø, respectively. earing Mounting size Stroke Rear plate ø, ø, ø, ø, ø Double acting ir 1.0MPa 0.MPa (t horizontal non-load) ir cushion to 7mm/s asic Front flange Refer to p.3.-3 regarding other specifications and p and regarding dimensions. Possible to mount an auto switch. CL MLGC CN C CV/MVG CXW CXS CXT MX MXU MXS MXQ MXF MXW MXP MG MGP MGQ MGG MGC MGF CY1 MY1 3.-5

6 Series MGC llowable Tip Load and Deflection Slide bearing MGCM - Stroke -R MGCM - Stroke -R MGCM - Stroke -R MGCM - Stroke -R MGCM - Stroke -R 3.-6

7 Compact Guide Cylinder Series MGC llowable Tip Load and Deflection all bushing bearing MGCL - Stroke -R MGCL - Stroke -R MGCL - Stroke -R MGCL - Stroke -R MGCL - Stroke -R CL MLGC CN C CV/MVG CXW CXS CXT MX MXU MXS MXQ MXF MXW MXP MG MGP MGQ MGG MGC MGF CY1 MY1 3.-7

8 Series MGC llowable Tip Load and Deflection Slide bearing MGCM - Stroke -R MGCM - Stroke -R MGCM - Stroke -R MGCM - Stroke -R MGCM - Stroke -R 3.-8

9 Compact Guide Cylinder Series MGC llowable Tip Load and Deflection all bushing bearing MGCL - Stroke -R MGCL - Stroke -R MGCL - Stroke -R MGCL - Stroke -R MGCL - Stroke -R CL MLGC CN C CV/MVG CXW CXS CXT MX MXU MXS MXQ MXF MXW MXP MG MGP MGQ MGG MGC MGF CY1 MY1 3.-9

10 Series MGC asic/with Rear Plate Stroke range C D E F P C D E F G H 75, 100, 1, 1, 0 75, 100 1, 1 0, M5 X 0. 8Depth10 M6 X 1Depth M6 X 1Depth M8 X 1.Depth M10 X 1.5Depth Depth6 M6 X 1Depth10 11Depth8 M8 X 1.Depth 11Depth8 M8 X 1.Depth Depth10 M10 X 1.5Depth18 17Depth M X 1.75Depth21 I J Without rear plate Z K L M N 38 Long stroke O M6 X 1 M6 X 1 M6 X 1 M8 X 1. M8 X 1. Stroke range to 0 3 to 0 3 to 0 3 to 0 3 to 1000 Note) Dimentions with a * mark is irrelevant to models without a rear plate. P M5 X 0.8 M5 X 0.8 Rc(PT)1/8 Rc(PT)1/8 Rc(PT)1/8 R Y Q R S T U racket mounting stroke racket mounting stroke 100st or more 1st or more 1st or more 0st or more 0st or more V W WH Wq X Y Z With auto switch MGC size SMGC size #1(#1+#4) 3.-10

11 Compact Guide Cylinder Series MGC Front Face Mounting Flange/With Rear Plate MGC F - -R CL MLGC CN C CV/MVG CXW CXS CXT MX MXU MXS MXQ MXF MXW MXP Stroke range 75, 100, 1, 1, 0 75, 100 1, 1 0, 0 0 O M6 X 1 M6 X 1 M6 X 1 M8 X 1. M8 X 1. Without rear plate Z P M5 X 0.8 M5 X 0.8 Rc(PT)1/8 Rc(PT)1/8 Rc(PT)1/ Long stroke Q R G stroke range S H to 0 3 to 0 3 to 0 3 to 0 3 to 1000 Note) Dimensions with a mark is irrelevant to models without a rear plate R T I Y U J V K W L M WH Wθ N X O M6 M8 M8 M8 M racket mounting stroke racket mounting stroke 100st or more 1st or more 1st or more 0st or more 0st or more Y P Z I J K L M With auto switch MGCF size SMGC size #2(#1+#2+#4) N 38 MG MGP MGQ MGG MGC MGF CY1 MY

Series MGC Construction Component Parts No. q w e r t y u i o!0!1!2!3!4!5!6!7!8!

12 Series MGC Construction Component Parts No. q w e r t y u Description Rod cover Tube cover Piston Piston rod ush Cushion ring Cushion ring Rubber magnet Packing retainer Cushion valve Valve retainer Lock nut Wear ring Rod end nut Cushion seal Cushion seal Piston gasket Cushion ring gasket Cushion ring gasket Head cover Cylinder tube Guide body Small flange Large flange Front plate Rear plate Material luminum alloy luminum alloy luminum alloy Carbon steel Oil impregnated sintered alloy rass rass Synthetic rubber Resin Urethane Urethane NR NR NR luminum alloy luminum alloy luminum alloy Cast iron Note Hard white anodized Hard white anodized Chromated Hard chrome plated ø, ø: stainless steel ø or more: Lead-bronze cast Note 1) (Nothing for long stroke) Electroless nickel plated Electroless nickel plated NIckel plated Note 2) W/ cushion ring gasket : Except standard ø and ø Hard white anodized For long stroke Hard anodized White anodized For basic style Matt nickel plated Front face mounting flange Matt nickel plated Matt nickel plated Note 1) Common with cushion ring : Except standard ø and ø Note 2) Common with cushion packing : Except standard ø and ø Component #0 #1 #2 #3 #4 #5 #6 #7 #8 #9 $0 $1 $2 $3 $4 $5 Description Slide bearing all bushing bearing Guide rod End bracket Washer Spring washer Felt Holder For hole C retaining ring racket all in cup Hex. socket head cap screw Hex. socket head cap screw Hex. socket head cap screw Hex. socket head cap screw Hex. socket head cap screw Rod seal Piston seal Tube gasket Valve seal Gasket for valve retainer size Material Special friction material Carbon steel Hi-carbon chrome bearing steel Carbon steel Stell wire Felt Stainless steel Carbon tool steel Stainless steel Chrome molybdnum steel Chrome molybdnum steel Chrome molybdnum steel Chrome molybdnum steel Chrome molybdnum steel NR NR NR NR NR Replacement Parts: Seal Kits Kit No. CGI-PS CGI-PS CGI-PS CGI-PS CGI-PS Note Slide bearing all bushing bearing Hard chrome plated Slide bearing Quenched, Hard chromium plated all bushing bearing Matt nickel plated Contents Set of above $1, $2, $3, $4 and $5. Seal kit includes rod seal $1, piston seal $2, tube gasket $3, valve seal $4 and gasket for valve retainer $5. Order a packing set according to applicable bore size. Cylinder mounting Small/large flange mounting Front plate mounting Rear plate mounting racket mounting 3.-

Series MGC uto Switch Specifications Refer to p.5.3-2 for detailed information of auto switch.

13 Series MGC uto Switch Specifications Refer to p for detailed information of auto switch. pplicable uto Switch size uto switch model D-5, 6 D-7, 8 Electrical entry (Function) Grommet Grommet Reed switch D-73C, C D-C7, C8 D-C73C, CC D-59W D-G5, K5 Connector Grommet Connector Grommet (2 color indication) Grommet, D-G5NTL Grommet (with timer), D-G7, K7 Grommet D-K79C Connector Solid state switch D-H7 D-H7C D-G5 W, K59W D-G5L D-G59F D-H7 W D-H7L D-H7 F Grommet Connector Grommet (2 color) Grommet (2 color, water resistant) Grommet (2 color, with diagnostic output) Grommet (2 color) Grommet (2 color, water resistant) Grommet (2 color, with diagnostic output) * Contact SMC for detailed information of D-7/8 and D-G5/K7. Precautions e sure to read before handling. Refer to p.0-44 to 0-46 for common precautions of auto switch. Page * * * * CL MLGC CN C CV/MVG CXW CXS CXT MX MXU MXS MXQ MXF MXW MXP MG MGP MGQ MGG MGC MGF CY1 MY1 3.-

14 Series MGC uto Switch Proper Mounting Position (Stroke End) D-C7, C8 D-H7 D-5, 6 D-G5, K5 D-7, 8 D-G7, K7 uto Switch Mounting Position size uto switch ( ): For long stroke D-7, 8 D-73C D-C D-G7, K7 D-K79C 21.5 (29.5) 21.5 (29.5) 22.5 (.5) (34) 29.5 (41.5) D-C7, C8 D-C73C D-CC (28.5).5 (28.5) 21.5 (29.5) 24 (33) 28.5 (.5) D-5, 6 D-G5 W D-K59W D-G5L D-G59F (22.5) (22.5).5 (23.5) 18 (27) 22.5 (34.5) D-59W (.5) 17.5 (.5) 18.5 (26.5) 21 ().5 (.5) D-H7 D-H7C (27.5) 19.5 (27.5).5 (28.5) 33 () 27.5 (39.5) (26) 18 (26) 19 (27) 21.5 (.5) 26 (38) D-H7 W D-G5 D-H7 F D-K5 D-H7L D-G5NTL (24) (24) 17 () 19.5 (28.5) 24 (36) uto Switch Mounting Height D-C7, C8 D-7, 8 D-G5, K5 D-73C D-G5 W D-H7 D-C73C D-C D-K59W D-H7 W D-G7, K7 D-5, 6 D-H7 F D-CC D-K79C D-59W D-H7C D-G5L D-H7L D-G5NTL D-G59F Hs Hs Hs

Series MGC ø20, ø25, ø32, ø40, ø50

Series MGC ø20, ø25, ø32, ø40, ø50 Compact Guide Cylinder Series MGC ø, ø, ø, ø, ø Linear Transfer Unit with compact guide body and front plate Grease nipple offers easy lubrication for bearings Compact front plate and guide body Space