NEN Series NFPA Aluminum Cylinders

Size: px
Start display at page:

Download "NEN Series NFPA Aluminum Cylinders"

Transcription

1 NEN Series NP luminum ylinders 1-1/2" to 4" bore sizes ompetitively priced Magnetic piston standard djustable cushion standard Sleeve nut construction standard Stocked strokes Technical data Medium: iltered compressed air Operating temperature: -25 to 140 (-5 to 60 ) with iton Seals -23 to 300 (-5 to 150 ) Operating Pressure: Minimum 7 psi (.5 bar) Maximum 140 psi (9.7 bar) Bore Sizes: 1-1/2", 2", 2-1/2", 3-1/4", 4" Rod iameter: 5/8" diameter piston rod in 1-1/2", 2", 2-1/2" bore 1" diameter piston rod in 3-1/4" and 4" bore Lubrication: None required Norgren ir ylinders are rated for no lube added service. Materials Head and End aps: ie cast aluminum painted for corrosion protection Tube: luminum alloy, hard coat anodized Piston: machined high-strength aluminum casting. Rod Bearing: clean metal teflon composite Seals: nitrile rod seal/wiper, nitrile piston seals, nitrile tube end seals Tie Rods: Nickel plated high-tensile strength steel, nickel plated 1 Piston Rod: Hard chrome plated carbon steel, ground and polished. 2 Head Bearing Housing and cap: ie cast aluminum 3 Tie-Rods: Nickel plated steel 4 Piston: Machined aluminum. 5 aptive ushion Needle djustment: Provides safe and precise cushion adjustment. 6 Wear Ring: Teflon material provides supreme wear and excellent bearing support. 7 ylinder Tube: Hard anodized aluminum alloy, with corrosion and score resistant surface finish Piston Rod Wiper/Seal: brasion resistant nitrile. 9 Piston Seal: Single Nitrile bi-directional piston seal. 10 ushion Seal: Nitrile cushion seal is captured within a precision machined groove allowing for linear and radial float eliminating misalignment. 11 Rod Bearing: composite of Teflon and polyphenylene sulfide and bronze molded to a steel backing provides low friction and excellent linear features NEN dd-a-mount flexibility NEN cylinders allow you to add NP mounts shown below when you order the cylinder from the factory, or add the mounts later. NP M1 NP M2 NP MP1 NP MP2 N/US

2 NEN Series NP luminum ylinders ylinder Order Information Series NEN Piston Rod Threads Small Male (Solid) (std) 1 Intermediate Thread Male (Solid) 2 emale 3 Bore Single rod 1-1/2" 2.0" 2-1/2" E 3-1/4" 4.0" G Stroke (whole inches) ll bores 48" max.* * onatact factory for strokes longer than 48". raction of Stroke length 0 Blank 0.125" E G J M P S NEN 1 x 4 E MP dditional Options iton Seals Rod Extension Non-standard piston rod thread Piston Rod thread extension Stainless steel piston rod Stainless steel tie rods RX T TX S SS Mounting Options** MS4 (standard) blank Head Rectangular lange M1 ap Rectangular lange M2 etachable ap levis MP2 ap ixed levis MP1 Tie Rod Extended both ends MX1 Tie Rod Extended ap MX2 Tie Rod Extended Head MX3 Side Lug Mount MS2 ** or factory installed mounts specify mounting option in position 6. If no mount required leave position 6 blank. Mounting kits can be ordered separately ontact factory for mounting kits, or visit Stock Stroke ylinders 1-1/2" Bore 2.0" Bore 2-1/2" Bore 3-1/4" Bore 4.0" Bore Model ylinder Stroke Model ylinder Stroke Model ylinder Stroke Model ylinder Stroke Model ylinder Stroke Number Bore Number Bore Number Bore Number Bore Number Bore NEN1 x 1 1-1/ NEN1 x NEN1E x 1 2-1/ NEN1 x 1 3-1/ NEN1G x NEN1 x 2 1-1/ NEN1 x NEN1E x 2 2 1/ NEN1 x 2 3-1/ NEN1G x NEN1 x 3 1-1/ NEN1 x NEN1E x 3 2 1/ NEN1 x 3 3-1/ NEN1G x NEN1 x 4 1-1/ NEN1 x NEN1E x 4 2 1/ NEN1 x 4 3-1/ NEN1G x NEN1 x 5 1-1/ NEN1 x NEN1E x 5 2 1/ NEN1 x 5 3-1/ NEN1G x NEN1 x 6 1-1/ NEN1 x NEN1E x 6 2 1/ NEN1 x 6 3-1/ NEN1G x NEN1 x 8 1-1/ NEN1 x NEN1E x 8 2 1/ NEN1 x 8 3-1/ NEN1G x NEN1 x / NEN1 x NEN1E x / NEN1 x / NEN1G x NEN1 x / NEN1 x NEN1E x / NEN1 x / NEN1G x NEN1 x / NEN1 x NEN1E x / NEN1 x / NEN1G x NEN1 x / NEN1 x NEN1E x / NEN1 x / NEN1G x NEN1 x / NEN1 x NEN1E x / NEN1 x / NEN1G x NEN1 x / NEN1 x NEN1E x / NEN1 x / NEN1G x N/ NEN1 x NEN1E x / NEN1 x / NEN1G x NP (M1) 03 Head Rectangular lange Mount NP (M2) 04 ap Rectangular lange Mount B Holes (4) B Holes (4) E R E R T U W Z + Stroke T U E B R T U W ll dimensions ±.015 unless otherwise noted. E B R T U Z ll dimensions ±.015 unless otherwise noted. N/US

3 NEN Series NP luminum ylinders NP (MS4) Side tap mount standard EE NPT (2) øb Bushing W Y P + Stroke Thds. 4 Places Both Ends KK Thds (lats) TN R E Sq. NT Tap N epth XT G LB + Stroke SN + Stroke ZJ + Stroke J ø B KK Thds. øb Thds. øb KK Thds. eep cross lats Type 1 Solid (Small Male) Type 2 Solid (Intermediate Thread Male Optional) Type 3 emale (Optional) ø Rod 5/8" 5/8" 5/8" 1" 1" (19.05) (19.05) (28.58) (28.58) (66.04) (78.74) (99.06) (119.38) B (28.55) (28.55) (38.07) (38.07) B (28.58) (28.58) (28.58) (28.58) (28.58) (9.53) (9.53) (9.53) (12.70) (12.70) 1/2-20 1/2-20 1/2-20 7/8-14 7/ (14.27) (14.27) (14.27) (22.23) (22.23) 1/4-28 5/ / /8-24 3/8-24 E (50.80) (63.50) (76.20) (95.25) (114.30) EE 3/8 3/8 3/8 1/2 1/2 G (32.00) (32.00) (33.02) (39.88) (39.88) J (25.65) (26.92) (26.92) (29.97) (29.97) KK 7/ / / /4-16 3/4-16 LB (92.08) (92.08) (95.25) (107.95) (107.95) MM (15.88) (15.88) (15.88) (25.40) (25.40) NT 1/4-20 5/ /8-16 1/2-13 1/2-13 N (7.14) (11.13) (15.06) (15.88) (15.88) P (59.94) (60.96) (62.99) (69.09) (69.09) R (36.32) (46.74) (55.63) (70.10) (84.33) SN (57.15) (57.15) (60.33) (66.68) (66.68) TN (15.88) (22.23) (31.75) (38.10) (52.40) (15.88) (15.88) (15.88) (22.23) (22.23) W (25.40) (25.40) (25.40) (34.93) (34.93) XT (49.23) (49.23) (49.23) (61.93) (61.93) Y (43.43) (43.43) (44.45) (59.44) (59.44) ZJ (120.65) (120.65) (123.95) (147.83) (147.83) N/US

4 NEN Series NP luminum ylinders MP1 Mount Supplied with Standard Pin MR LB + Stroke X + Stroke L B B L LB MR X MP2 Mount Supplied with Standard Pin MR L X + Stroke L M B B L L M MR X NP (MX1) (4) Extended Tie Rods Both Ends Mount NP (MX2) ap Tie Rods Extended Mount NP (MX3) Head Tie Rods Extended Mount threads R BB ZB + Stroke K BB R BB /4 28 5/ / /8 24 3/8 24 K R ZB ll dimensions ±.015 unless otherwise noted. N/US

5 NEN Series NP luminum ylinders MS2 Mount SB thru ia. S - Bore S eep SH ST XS SU SL SS + Stroke ZB + Stroke SU SY TS US SB S S SH SL SY SS ST SU TS US XS ZB NEN ylinder ccessories and Kits R (rod clevis) ER Radius B L E RE (rod eye) ER Radius E B KK Thds. H cross Hex lats Kit number KK B. E H ER L NEN-R 7/ NEN-R 3/ R and RE rod accessories come complete with pivot pin and retaining clips. KK Thds. Kit number KK B E ER NEN-RE 7/ NEN-RE 3/ NP M1 / M2 Mounting Kit - MK-NEN-M1 MS2 Mounting Kit B Holes (4) SL SB ia. Thru S - bore x S eep E R ST SU SY TS US T U Kit number SB S S SY ST SU TS US MK-NEN-MS MK-NEN-MS MK-NENE-MS MK-NEN-MS MK-NENG-MS Kit number U T B E R MK-NEN-M1 3-3/8 2-3/4 5/ /8 MK-NEN-M1 4-1/8 3-3/8 3/8 2-1/ /8 MK-NENE-M1 4-5/8 3-7/8 3/ /8 MK-NEN-M1 5-1/2 4-11/16 7/16 3-3/ /8 MK-NENG-M1 6-1/4 5-7/16 7/16 4-1/ /8 N/US

6 NEN Series NP luminum ylinders EB (eye bracket) Radius E B ø 4 Places MP1 Mount kit - MK-NEN-MP1 G M Radius L B B E NP Eye Bracket NEN-EB NEN-EB B B E L M ll dimensions ±.015 unless otherwise noted. L MR Kit number L B MR G MK-NEN-MP MK-NEN-MP MK-NENE-MP MK-NEN-MP MK-NENG-MP MP1 and MP2 kits come complete with mounting hardware, pivot pin and retaining clips. B MP2 Mount kit - MK - NEN - MP2 G MX1 Mount kit - MK-NEN-MX1 MX2/MX3 Mount kit-mk-nen-mx2 B L P (pin) ER LP LH B Kit number L B ER G MK-NEN-MP MK-NEN-MP MK-NENE-MP MK-NEN-MP MK-NENG-MP NP Pin NEN-5 NEN E LH LP E MX1 Mount Kit-MK-NEN-MX1 Tie Rod extended Both Ends Kit number B MK-NEN-MX1 1/ MK-NEN-MX1 5/ MK-NENE-MX1 5/ MK-NEN-MX1 3/ MK-NENG-MX1 3/ MX2 Mount Kit-MK-NEN-MX2 Tie Rod Extended ap End Kit number B MK-NEN-MX2 1/4-28 N/ MK-NEN-MX2 5/16-24 N/ MK-NENE-MX2 5/16-24 N/ MK-NEN-MX2 3/8-24 N/ MK-NENG-MX2 3/8-24 N/ MX3 Mount Kit-MK-NEN-MX3 Tie Rod Extended Head End Kit number B MK-NEN-MX2 1/ N/ MK-NEN-MX2 5/ N/ MK-NENE-MX2 5/ N/ MK-NEN-MX2 3/ N/ MK-NENG-MX2 3/ N/ WRNING These products are intended for use in industrial compressed air systems only. o not use these products where pressures and temperatures can exceed those listed under Technical ata. Before using these products with fluids other than those specified for non-industrial applications, life-support systems, or other applications not within published specifications, consult Norgren. Through misuse, age, or malfunction, components used in fluid power systems can fail in various modes. The system designer is warned to consider the failure mode of all component parts used in fluid power systems and to provide adequate safeguards to prevent personal injury or damage to equipment in the event of such failure. System designers must provide a warning to end users in the system instructional manual if protection against a failure mode cannot be adequately provided. System designers and end users are cautioned to review specific warnings found in instruction sheets packed and shipped with these products. N/US

NFPA Double acting imperial cylinders

NFPA Double acting imperial cylinders > > Ø 4... 8 > > Adjustable captive cushion needle > > Constructed of the finest materials > > Magnetic piston standard > > Wide temperature range > > Shock and vibration tested to N 61373, Category 1,

More information

ASP Series Steel Body NFPA Cylinder Line

ASP Series Steel Body NFPA Cylinder Line Series Steel Body NFPA Cylinder Line www.numatics.com Table of Contents Series Features and Benefits 3 Standard Mounts 4 How to Order 5 Port Size Availability 6 Dimensions 7-34 Rod Ends 7 Large Bore 8

More information

Parker Series 2A Air Cylinder

Parker Series 2A Air Cylinder Parker ir ylinder hen the job calls for reliable, heavy-duty performance, specify. 00,000 psi yield strength chrome-plated, case-hardened piston rod.,000 psi yield strength rod-end stud with rolled threads.

More information

Options selector for T, VT, and ET V T S R 3 / 8 R C E N 1-1/8 5. 5/16" or 3/8"

Options selector for T, VT, and ET V T S R 3 / 8 R C E N 1-1/8 5. 5/16 or 3/8 Series T, T & VT Tiny Tim TUTORS /" and -/8" bore Single and double rod end styles Viton seals optional for higher temperatures Technical data Medium: ompressed air, filtered, lubricated or non-lubricated

More information

Industrial Cylinder Products Hydraulic and Pneumatic Cylinders. Catalog (01/11)

Industrial Cylinder Products Hydraulic and Pneumatic Cylinders. Catalog (01/11) Industrial ylinder Products Hydraulic and Pneumatic ylinders atalog 00- (0/) Pneumatic ylinders Index Page Series, Heavy Duty, 0 P.S.I. ccessories - vailable Mountings and Specifications ushion Data -

More information

FULL COLOR TAB #1 TA 7

FULL COLOR TAB #1 TA 7 FULL COLOR TAB #1 TA 7 TA - How to Order Floating Rod Bushing SELF ALIGNMENT FEATURE Rod Bushing is designed to float.00 to improve bearing surface alignment. SERIES TA (NFPA) CYLINDER Reduces cylinder

More information

wiper seal keeps contaminates from getting into cylinder by aggressively wiping foreign materials from the piston rod, enhancing the rod seal life.

wiper seal keeps contaminates from getting into cylinder by aggressively wiping foreign materials from the piston rod, enhancing the rod seal life. CTUTORS NFP Series luminum & J Steel Cylinders 1-1/2 to 12 inch bore size Impact dampening seals djustable captive cushion needle Ecology cylinders meet OSH noise standards Constructed of the finest materials

More information

wiper seal keeps contaminates from getting into cylinder by aggressively wiping foreign materials from the piston rod, enhancing the rod seal life.

wiper seal keeps contaminates from getting into cylinder by aggressively wiping foreign materials from the piston rod, enhancing the rod seal life. NPA Aluminum & Steel Cylinders NPA Series A Aluminum & J Steel Cylinders 1-1/2 to 12 inch bore size Impact dampening seals Adjustable captive cushion needle Ecology cylinders meet OSHA noise standards

More information

Medium Duty Hydraulic Cylinders Series 3L

Medium Duty Hydraulic Cylinders Series 3L Medium Duty Hydraulic ylinders Series L Medium Duty Service Industrial Tie od onstruction Nominal Pressure 000 PSI Depending on ore Size Standard ore Sizes " through " Piston od Diameters /" through -/"

More information

Series 83. Stainless Steel Mini Cylinder

Series 83. Stainless Steel Mini Cylinder Stainless Steel Mini Cylinder Magnet included in 7/8 and 1-1/4 bore only in double acting cylinder THEORETICAL CYLINDER FORCE (LBS). Operating Pressures (PSI) Size Action 25 50 75 100 125 150 3/4" Out

More information

AL4 Series Air Cylinder

AL4 Series Air Cylinder L Series ir ylinder atalog M097- February, 00 Up to 0 PSI Bore Sizes -/" through 8" NFP Interchangeable 7 Standard Mounting Styles Series ylinders Up to 0 PSI Permanently lubricated BT & BTM Series ylinders

More information

HYDRAULIC HEAVY DUTY

HYDRAULIC HEAVY DUTY Catalog #HHD-16 12/16 HYDRAULIC HEAVY DUTY Series HHD 3000 PSI RATED 10-25-16 WARNING IMPROPER SELECTION, IMPROPER USE OR FAILURE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN CAN CAUSE PROPERTY DAMAGE,

More information

FP 106 x PTM - PS

FP 106 x PTM - PS Single and Double acting 9/6" to " bore Technical Data: Medium: Filtered, lubricated or nonlubricated, compressed air Operating Pressure 00 psig (.6 Bar) Max. Temperature Range: Standard Nitrile seals:

More information

High Performance Repairable Pneumatic Cylinder Parker Hannifin Corporation

High Performance Repairable Pneumatic Cylinder Parker Hannifin Corporation High Performance Repairable Pneumatic Cylinder 219 Pneumatic ivision eatures Optional Piston Magnet Located under wear band, piston magnet is used for through-thebarrel sensors for electronic piston position

More information

Series VH Hydraulic Cylinders

Series VH Hydraulic Cylinders Series H Series H very heavy-duty hydraulic cylinders are premium quality cylinders with operating capacities of,000 PSI. They fully meet NPA standards. And to make sure every cylinder is premium-quality,

More information

* Screw clearance to allow bolt head to pass through - no counter bores

* Screw clearance to allow bolt head to pass through - no counter bores Technical Data: Medium: Filtered, lubricated or nonlubricated, compressed air Operating Pressure 00 psig (.6 Bar) Max. Temperature Range: Standard Nitrile seals: -0 F to 00 F (-0 to 65 ) 50 F max. with

More information

HEAVY DUTY PNEUMATIC CYLINDERS

HEAVY DUTY PNEUMATIC CYLINDERS HEAVY DUTY PNEUMATIC CYLINDES Features: Conforms to ISO:30 standard. Double Acting, with adj. cushioning at both ends. Sizes: Ø, Ø, Ø, Ø, Ø, Ø0, Ø1, Ø0, Ø0 & Ø0. : Other bore sizes on request Seamless

More information

ACTUATORS. F-Series Plus Cylinders Single and Double acting 9/16" to 3" bore. Technical features Medium: Filtered, lubricated or nonlubricated,

ACTUATORS. F-Series Plus Cylinders Single and Double acting 9/16 to 3 bore. Technical features Medium: Filtered, lubricated or nonlubricated, F-Series Plus ylinders Technical features Medium: Filtered, lubricated or nonlubricated, compressed air Operating pressure 200 psig (3.6 Bar) Max. Temperature range: Standard Nitrile seals: -40 F to 200

More information

AS/ASH SERIES ALUMINUM PNEUMATIC AND HYDRAULIC CYLINDERS... 6

AS/ASH SERIES ALUMINUM PNEUMATIC AND HYDRAULIC CYLINDERS... 6 AS/ASH SERIES ALUMINUM PNEUMATIC AND HYDRAULIC CYLINDERS............. 6 Section 6 8 ORDERING INFORMATION For Rod End Dimensions see back cover foldout... Basic Cylinder No Mount.0" to 4.00" For pressure

More information

RPD Series Delrin End Cap Roundline Plus Stainless Steel Body Actuators 9/16" to 2" bore Double acting pneumatic actuators

RPD Series Delrin End Cap Roundline Plus Stainless Steel Body Actuators 9/16 to 2 bore Double acting pneumatic actuators RP Series elrin nd ap Roundline Plus Stainless Steel Body ctuators 9/6" to 2" bore ouble acting pneumatic actuators elrin cetal Resin end cap cylinders for washdown, and corrosive environment application

More information

Medium Duty 1.5 ~ 4 Bore 12 Different NFPA Mounting Options Non-Rotating Option Tandem Cylinder Option Auto Switch Capable

Medium Duty 1.5 ~ 4 Bore 12 Different NFPA Mounting Options Non-Rotating Option Tandem Cylinder Option Auto Switch Capable N304 Air Cylinder NCA1 Series NFPA Interchangeable Medium Duty 1.5 ~ 4 Bore 12 Different NFPA Mounting Options Non-Rotating Option Tandem Cylinder Option Auto Switch Capable NFPA Interchangable Air Cylinder

More information

PURAKAL SERIES 100 TABLE OF CONTENTS

PURAKAL SERIES 100 TABLE OF CONTENTS TABLE OF CONTENTS How to Order Cylinder......................... Repair Kit......................... Seal Kit......................... Warranty......................... Parts List.........................

More information

NFPA Aluminum & Steel Cylinders

NFPA Aluminum & Steel Cylinders Section 11 NFP luminum & Steel ylinders Page T-11-18 ylinder with 01 (MS4) Side Tapped Page T-11-22 ylinder with 03 (MF1) Head ectangular Flange Page T-11-24 ylinder with 03 (M3) Head Square Flange Series

More information

SERIES MH (NFPA) CYLINDER

SERIES MH (NFPA) CYLINDER MH SERIES TAB 58 Floating Rod Bushing SELF ALIGNMENT FEATURE Rod Bushing is designed to float.002 to improve bearing surface alignment. SERIES MH (NFPA) CYLINDER Reduces cylinder drag and erratic operation

More information

Air/Oil Tanks Air Boosters Cylinder Options Multi-Stage Triple-Rod Basic Cylinders Accessories Technical Data TRA HOW TO ORDER: SERIES TRA (TRIPLE PIS

Air/Oil Tanks Air Boosters Cylinder Options Multi-Stage Triple-Rod Basic Cylinders Accessories Technical Data TRA HOW TO ORDER: SERIES TRA (TRIPLE PIS SERIES TRA TRIPLE ROD NEW HEAVY-DUTY TRIPLE ROD DESIGN TRD s TR Series has been redesigned. The new series, TRA is a Heavy-Duty version of the TR Series. The new series is a drop-in replacement of the

More information

RT Series Roundline Plus Thrusters

RT Series Roundline Plus Thrusters 9/16" to 3" bore Composite and Roller Bearings PS magnetic piston option Optional ecology seal Optional shock absorbers Choice of high load composite or precision low friction bearings Comes with stroke

More information

SERIES TA (NFPA) CYLINDER

SERIES TA (NFPA) CYLINDER Floating Rod Bushing SELF ALIGNMENT FEATURE Rod Bushing is designed to float.00, improving bearing surface alignment. SERIES (NFPA) CYLINDER Reduces cylinder drag and erractic operation Reduces cylinder

More information

SERIES PSI 5000 PSI NON SHOCK HYDRAULIC CYLINDER PURAKAL CYLINDERS, INC PURAKAL CYLINDERS, INC

SERIES PSI 5000 PSI NON SHOCK HYDRAULIC CYLINDER PURAKAL CYLINDERS, INC PURAKAL CYLINDERS, INC CYLINDERS, INC SERIES 3000 3000 PSI 5000 PSI NON SHOCK PURAKAL 1234 345 4567 6789 8901 0123 23 PURAKAL 1234567 HYDRAULIC CYLINDER PURAKAL CYLINDERS, INC P.O. Box 22038 1017 S.Danebo Ave. Eugene, OR 97402-0414

More information

Hydraulic Cylinder NFPA Industrial Type

Hydraulic Cylinder NFPA Industrial Type Hydraulic Cylinder NFPA Industrial Type RA 7038/08.3 Replaces: 0.3 /44 Model CDT/CGT Series X Nominal pressure: Up to,500 psi maximum Table of contents Features Contents Page Duty, up to,500 psi (see chart

More information

CYLINDERS OPTIONS ACCESSORIES

CYLINDERS OPTIONS ACCESSORIES CYLINDERS NFPA Interchangeable 1.50 thru 1 Bores 50 PSI Pneumatic Strokes to 10 Inches Permanent Lubrication Temperatures: 00 F Standard Double Acting Multi-Stage Multi-Position Triple Rod Flush Mount

More information

MEDIUM DUTY HYDRAULIC NFPA STYLE 1 1/2 TO 8 BORE AIR 250 PSI HYDRAULIC 1500 PSI

MEDIUM DUTY HYDRAULIC NFPA STYLE 1 1/2 TO 8 BORE AIR 250 PSI HYDRAULIC 1500 PSI AIR CYLINDERS & MEDIUM DUTY HYDRAULIC NFPA STYLE 1 1/2 TO 8 BORE AIR 250 PSI HYDRAULIC 1500 PSI CONSTRUCTION FEATURES 1. Rod Wiper Urethane 90A 65 to +220F, large cross section lip type wiper designed

More information

LP/LPM Series. Non-Lube Air Cylinder P1M. Tooling Plate P1M. Swing Clamp P1M. Contents E51

LP/LPM Series. Non-Lube Air Cylinder P1M. Tooling Plate P1M. Swing Clamp P1M. Contents E51 Non-Lube Air Cylinder P1G C05(S) LP(M) Swing Clamp Tooling Plate Contents Features...52 Ordering Information...53 Specifications...54 Basic Dimensions...55 Mounting Options...56 Spring Data...57 Rod Options...58

More information

HH SERIES: HEAVY DUTY INDUSTRIAL HYDRAULIC TRD BIMBA. company

HH SERIES: HEAVY DUTY INDUSTRIAL HYDRAULIC TRD BIMBA. company HH SERIES: HEAVY DUTY INDUSTRIAL HYDRAULIC TRD a BIMBA company The TRD difference... Precision machined throughout. We started in business as precision machinists. Every component is machined in a manner

More information

NFPA Interchangeable Air Cylinder Medium Duty Series. ø1.5", ø2", ø2.5", ø3.25", ø4"

NFPA Interchangeable Air Cylinder Medium Duty Series. ø1.5, ø2, ø2.5, ø3.25, ø4 NFP Interchangeable ir ylinder Medium Duty Series Series N ø.5", ø2", ø2.5", ø3.25", ø4" P 2 M2 2 S 76 85 95 P95 Medium Duty.5 to 4" Bore 2 Different NFP Mounting Options Non-rotating Option Tandem ylinder

More information

HYDRAULIC CYLINDERS NFPA STYLE 1 1/2 TO 8 BORE HYDRAULIC 3000 PSI

HYDRAULIC CYLINDERS NFPA STYLE 1 1/2 TO 8 BORE HYDRAULIC 3000 PSI HEAVY DUTY HYDRAULIC CYLINDERS NFPA STYLE 1 1/2 TO 8 BORE HYDRAULIC 3000 PSI CONSTRUCTION FEATURES 1. Rod Wiper Urethane 90A 65 to + 220F, large cross section lip type wiper designed to protect the bearing

More information

PL-2 Series Medium-Duty Industrial Hydraulic Cylinders BPL-2 PH-2 PH-3 PHX

PL-2 Series Medium-Duty Industrial Hydraulic Cylinders BPL-2 PH-2 PH-3 PHX PL- Series Medium-Duty Industrial Hydraulic Cylinders PHX PH- PL- PH- Contents Features... Specifications / Mountings... Design Features and enefits... - Mounting Information, " to " ore Sizes... 8- Mounting

More information

Industrial Cylinder Products. Pneumatic & Hydraulic Cylinders

Industrial Cylinder Products. Pneumatic & Hydraulic Cylinders aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding Industrial ylinder Products Pneumatic & Hydraulic ylinders In line

More information

FULL COLOR TAB #6 TC 105

FULL COLOR TAB #6 TC 105 FULL COLOR TAB #6 TC 105 SERIES TC 2-STAGE TELESCOPING CYLINDER CONSTRUCTION FEATURES 3 Bore Sizes: 0.75, 1.50 and 2.50 Strokes up to 60 2-Stage Telescoping Space Saving Design 100% Double Action Heavy-Duty

More information

250 psi rating. series. pneumatic cylinders. bulletin 0606ST.

250 psi rating. series. pneumatic cylinders. bulletin 0606ST. 20 psi rating series ST pneumatic cylinders bulletin 0606ST www.royalcylinders.com i Contents Page Description 1 Mounting Styles 2 Features Description Mounting dimensions 3 STNM No Mount (MX0) 3 STME

More information

Stainless Steel Air Cylinders. Series SA

Stainless Steel Air Cylinders. Series SA Stainless Steel Air Cylinders aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding In line with our policy of continuing

More information

Vickers Pneumatic Cylinders Light Duty. L Series

Vickers Pneumatic Cylinders Light Duty. L Series Vickers Pneumatic Cylinders Light Duty L Series The Power of One Eaton HANSEN GROMELLE There s a certain energy at Eaton. It s the power of integrating the competencies of some of the world s most respected

More information

Miller JV Series. Medium Duty Hydraulic Cylinders. Up to 1000 PSI Bore Sizes 1" through 8" 18 Mounting Styles. Catalog M September, 2011

Miller JV Series. Medium Duty Hydraulic Cylinders. Up to 1000 PSI Bore Sizes 1 through 8 18 Mounting Styles. Catalog M September, 2011 Medium Duty Hydraulic Cylinders Catalog M0- September, 0 Up to 000 PSI ore Sizes " through " Mounting Styles AV Series Cylinders Up to 0 PSI Permanently Lubricated AL Series Aluminum Cylinders Up to 0

More information

1.134 L INEAR A CTUATOR: AIR C YLINDER S ERIES C95

1.134 L INEAR A CTUATOR: AIR C YLINDER S ERIES C95 1.134 L INEAR A CTUATOR: AIR C YLINDER H O W M ADE I N USA T ECHNICAL T O O R D E R C95 AIR C YLINDERS C95 P ISTON R OD S Basic K Non-Rotating P ISTON - Basic D Magnetic B ORE IN MM 50 63 80 100 B S T

More information

Medium Duty Hydraulic Cylinders. Series 3L

Medium Duty Hydraulic Cylinders. Series 3L Medium Duty Hydraulic Cylinders Series L Catalog HY08-0-6/NA Series L In line with our policy of continuing product improvement, specifications and information contained in this catalog are subject to

More information

Accessories Air/OilTanks Switches Clevis&Brackets AirBoosters AlignmentCouplers. Sensors

Accessories Air/OilTanks Switches Clevis&Brackets AirBoosters AlignmentCouplers. Sensors Air/OilTanks Clevis&Brackets AirBoosters AlignmentCouplers Sensors On time,consistentdelivery.everycustomer sorderisimportant.ourbusinesismanaged solargeordersdonotdisruptourpublisheddeliveryschedules.

More information

TaskMaster Pneumatic Cylinder

TaskMaster Pneumatic Cylinder TaskMaster Pneumatic Cylinder Index TaskMaster Cylinders Index Air to 200 psi, 1-1/2" thru 6" Bore Page 1-1/2" thru 4" Bore Features & Specifications 2 (profile version) How to Order 3-5 Mounting Styles

More information

M/1000, Heavy Duty Cylinders Double Acting

M/1000, Heavy Duty Cylinders Double Acting > > Ø 2 to 12 (50 to 305 mm) > > Extremely rugged heavy duty construction - ideal for use in the most arduous conditions. > > Large range of bore sizes - ideal for a wide variety of industrial applications.

More information

RM/900/M Heavy duty cylinders Ø 1 1/4... 4

RM/900/M Heavy duty cylinders Ø 1 1/4... 4 Heavy duty cylinders Ø 1 1/4... 4 Heavy duty cylinder ideal for a wide range of rail applications Extensive range of mountings Rugged, reliable long established design Magnetic piston as standard Mounting

More information

Industrial Welded Cylinders

Industrial Welded Cylinders Industrial Welded ylinders Technical Manual Series WH Table of ontents Design Features and Specifications...2 How to Order...3 WH Mounting Dimensions...4 Rod End Styles...7 Technical Data...8 Design Features

More information

A Series Aluminum NFPA Interchangeable Cylinder Line

A Series Aluminum NFPA Interchangeable Cylinder Line Series luminum NFP Interchangeable Cylinder Line www.numatics.com Table of Contents Series Features and Benefits 3 Standard Mounts 4 How to Order 5 Basic No Mount Cylinder Dimensions 6 Rod End Dimensions

More information

Inch size: ø1.5", ø2", ø2.5", ø3.25", ø4" How to Order. Nil. Air cushion. Both ends. Nil. None N H R. Head end Rod end 400 (4") NCA1-L400 NCA1-F400

Inch size: ø1.5, ø2, ø2.5, ø3.25, ø4 How to Order. Nil. Air cushion. Both ends. Nil. None N H R. Head end Rod end 400 (4) NCA1-L400 NCA1-F400 NFPA Interchangeable Cylinder: Standard Type Double Acting, Single Rod (Medium Duty) Series NCA1 Inch size: ø1.5", ø2", ø2.5", ø3.25", ø4" Built-in magnet Nil None D W/ auto switch (Magnetic piston) Style

More information

CATALOG FL-16-B THE LIGHT-WEIGHT LINE WITH HEAVY-DUTY FEATURES

CATALOG FL-16-B THE LIGHT-WEIGHT LINE WITH HEAVY-DUTY FEATURES HEAVY-DUTY CATALOG FL-6-B THE LIGHT-WEIGHT LINE WITH HEAVY-DUTY FEATURES TABLE OF CONTENTS CYLINDER FEATURES DOUBLE-ACTING Series T, TS, TL and TLS 4 DOUBLE-ACTING DOUBLE-ENDED Series TDE and TSDE 4 MAGNETIC

More information

Features. Specification. Model. Tube I.D. (mm) 40,50,63 80, Medium. Proof pressure. Ambient temperature. Available speed range

Features. Specification. Model. Tube I.D. (mm) 40,50,63 80, Medium. Proof pressure. Ambient temperature. Available speed range series Features Non lubrication Special housing and bushing enables self lubrication of piston rod. High quality long service life Hard anodised aluminium cylinder tubes offer a high resistance to corrosion

More information

3MA/4MA Series Non-Lube NFPA Air Cylinders

3MA/4MA Series Non-Lube NFPA Air Cylinders MA/MA Series Non-Lube NFPA C S MNR MAJ/MAJ ACV MA/MA Contents MA Series -/" to 5" ore... 5-0 MA Series -/" to 5" ore... -5 How to Select a MA or MA Cylinder...6 MA asic Dimensions -/" to 5" ore... 7-8

More information

TABLE OF CONTENTS CYLINDER FEATURES MOUNTING STYLES DOUBLE-ACTING Series T and TS 4 DOUBLE-ACTING DOUBLE-ENDED Series TDE and TSDE 4 MAGNETIC SWITCH D

TABLE OF CONTENTS CYLINDER FEATURES MOUNTING STYLES DOUBLE-ACTING Series T and TS 4 DOUBLE-ACTING DOUBLE-ENDED Series TDE and TSDE 4 MAGNETIC SWITCH D HEAVY-DUTY CATALOG FL-6-A FLAIRLINE FAST Shipped in - days THE LIGHT-WEIGHT LINE WITH HEAVY-DUTY FEATURES TABLE OF CONTENTS CYLINDER FEATURES MOUNTING STYLES DOUBLE-ACTING Series T and TS 4 DOUBLE-ACTING

More information

SERIES HH (NFPA) CYLINDER

SERIES HH (NFPA) CYLINDER HH SERIES TAB 5 Floating Rod Bushing SELF ALIGNMENT FEATURE Rod Bushing is designed to float.002 to improve bearing surface alignment. SERIES HH (NFPA) CYLINDER HH Rod Lock Reduces cylinder drag and erratic

More information

Series LAA Industrial Interchangeable Pneumatic Cylinders. Catalog LAA-1 05/00

Series LAA Industrial Interchangeable Pneumatic Cylinders. Catalog LAA-1 05/00 Series L Industrial Interchangeable Pneumatic ylinders atalog L- 0/00 Model Numbers Lin-ct Series L Series L Model Numbers How to Develop Them How to Decode Them Lin-ct Series L cylinders can be completely

More information

LESA Series TT Linear Electrohydraulic Servo Actuators

LESA Series TT Linear Electrohydraulic Servo Actuators Vickers ylinders LS Series TT Linear lectrohydraulic Servo ctuators Designed specifically for wood products processing applications 5094.00/N/0797/ Introduction LS Series TT Linear lectrohydraulic Servo

More information

SERIES PSI OPERATING PRESSURE HEAVY HYDRAULIC DUTY CYLINDER HEAVY DUTY HYDRAULIC CYLINDER PURAKAL CYLINDERS, INC CYLINDERS, INC

SERIES PSI OPERATING PRESSURE HEAVY HYDRAULIC DUTY CYLINDER HEAVY DUTY HYDRAULIC CYLINDER PURAKAL CYLINDERS, INC CYLINDERS, INC CYLINDERS, INC SERIES 2500 3000 PSI ORATING PRESSURE HEAVY DUTY HEAVY HYDRAULIC DUTY CYLINDER HYDRAULIC CYLINDER PURAKAL CYLINDERS, INC PURAKAL P.O. Box 22038 CYLINDERS, INC P.O. Eugene, Box OR 22038 97402-0414

More information

2A Tie Rod Cylinders NFPA Pneumatic Cylinders for working pressures up to 18 bar. Catalogue HY /UK October 2006

2A Tie Rod Cylinders NFPA Pneumatic Cylinders for working pressures up to 18 bar. Catalogue HY /UK October 2006 A NFPA Pneumatic Cylinders for working pressures up to bar Catalogue HY0-090/UK October 00 Catalogue HY0-090/UK Mounting Styles A Cylinder Mounting Styles The standard range of Parker A cylinders comprises

More information

Bimba Extruded Linear Thrusters 2X FF X EE DP 2X DD 2X Ø DD X EE DP U V W X Y Z R S Dimensions - ET T B 4X TAP AA THRU Ø BB C BORE X CC DP (OPP.SIDE)

Bimba Extruded Linear Thrusters 2X FF X EE DP 2X DD 2X Ø DD X EE DP U V W X Y Z R S Dimensions - ET T B 4X TAP AA THRU Ø BB C BORE X CC DP (OPP.SIDE) Bimba Extruded Linear Thrusters Engineering Specifications Maximum Operating Pressure 140 psi (10 bar) Temperature Range 15 to 160 degrees F (-10 to 70 degrees C) Expected Service Life 1,500 miles (with

More information

Series OCG Pneumatic Cylinders

Series OCG Pneumatic Cylinders New Models The Price Alternative Series OCG Pneumatic Cylinders www.phdinc.com (8) 624-811 and Rebuildable round body cylinders 6 bore sizes standard stroke lengths High speed/double acting OCG2 ORDERING

More information

PRA/842000/M, PRA/ Clean Line cylinder Magnetic or non-magnetic piston, double acting

PRA/842000/M, PRA/ Clean Line cylinder Magnetic or non-magnetic piston, double acting > > 32... 00 mm > > Cylinder and mounting conform to ISO 5552 > > Smooth and spherical Corrosion resitant design conforms to N 672-2, accepted in the food industry > > Special PU seals provide high performance

More information

7" & 8" Bore zcy03 High Pressure Hydraulic Cylinders Series 3H

7 & 8 Bore zcy03 High Pressure Hydraulic Cylinders Series 3H " & " ore zcy0 High Pressure Hydraulic s Series H Heavy Duty Service Industrial Tie-Rod onstruction Nominal Pressure 000 PSI Fifteen Standard Mounting Styles For Division Plant Locations See Page II. 65

More information

ISO 6020/2 industricylindre Industrial cylinders

ISO 6020/2 industricylindre Industrial cylinders According to ISO 6020/2 1991 DIN 24554, compact series 160 bar Working pressure up to 21 Mpa Maximum pressure 25 Mpa Working temperature 20 to 80 C Stroke tolerance 0 to 1.2mm for strokes up to 1000mm,

More information

Pneumatic Cylinders NFPA Series

Pneumatic Cylinders NFPA Series Pneumatic Cylinders NFPA Series INDEX: General characteristics 3 Mounting styles 5 Piston rod characteristics (bore diam 25/150) 6 Single rod cylinder dimensions (bore diam 25/150) 8 Piston rod characteristics

More information

Series MH MH13 ISO MX1 ISO MX3 ISO MX2 MH12 MH10 MH36 MH35 MH42 ISO ME5 ISO ME6 ISO ME2 MH62 MH64 ISO MP1 ISO MP5 ISO MP3 MH61 MH72

Series MH MH13 ISO MX1 ISO MX3 ISO MX2 MH12 MH10 MH36 MH35 MH42 ISO ME5 ISO ME6 ISO ME2 MH62 MH64 ISO MP1 ISO MP5 ISO MP3 MH61 MH72 Series MH MH MH2 MH ISO MX ISO MX ISO MX2 MH MH MH ISO M ISO M ISO M2 MH MH2 MH ISO MP ISO MP ISO MP MH MH2 MH ISO MT ISO MT2 ISO MT Double Rod nd NPA MDX Milwaukee Cylinder Series MH ISO Metric Hydraulic

More information

Double-Wall Cylinders/Repairable Stainless Steel Cylinders

Double-Wall Cylinders/Repairable Stainless Steel Cylinders Double-Wall Cylinders/Repairable Stainless Steel Cylinders Double-Wall Cylinders 6.3-6.15 Repairable Stainless Steel Cylinders 6.16-6.24 DW/RSS Cylinders Bimba Double-Wall Cylinders The Bimba Double-Wall

More information

AIR CYLINDER Series A23, A24

AIR CYLINDER Series A23, A24 A23 - Magnetic A24 - Non-magnetic Double Acting s (Square type) Ø32-125 mm As per ISO 15552 / VDMA 24562 standards. Features Adjustable cushioning at both ends with elastomer pads Wide varieties of mountings

More information

Actuator Products Tie Rod Cylinders 4MA/4ML Series

Actuator Products Tie Rod Cylinders 4MA/4ML Series Catalog PDN000US Tie Cylinders MA/ML Series Tie Cylinders Industry leading aluminum NPA interchangeable cylinder with flexible construction s -/", ", -/", -/", " and 5" emovable bronze alloy gland/bearing

More information

LPRA/182000/M, ISO cylinder Magnetic piston, double acting

LPRA/182000/M, ISO cylinder Magnetic piston, double acting > > Ø 32... 125 mm > > High performance, stability and reliability > > M/50 switches can be mounted flush with the profile > > Cylinders and mountings conform to ISO 15552 (ISO 6431, VDM 24562 and NFE

More information

KEYSTONE PNEUMATIC ACTUATOR FIGURE 738

KEYSTONE PNEUMATIC ACTUATOR FIGURE 738 The F78 is a linear pneumatic actuator, designed especially for use on linear actuated valves FEATURES Suits all linear actuated valves. The Keystone F78 pneumatic actuator series is engineered to provide

More information

HPI Cylinders. Manufacturers of Hydraulic & Air Cylinders Since 1946

HPI Cylinders. Manufacturers of Hydraulic & Air Cylinders Since 1946 HPI Cylinders Manufacturers of Hydraulic & Air Cylinders Since 1946 Cylinder Catalog 2018 HPI Cylinders www.hpicylinders.com Since 1946 Main Plant 13766 Milroy Place Santa Fe Springs, CA 90670 Phone (800)

More information

Position locking clamp cylinder. UCAC2 Series. Bore size: ø50, ø63. Double acting single rod type

Position locking clamp cylinder. UCAC2 Series. Bore size: ø50, ø63. Double acting single rod type Position locking clamp cylinder U2 Series : ø50, ø63 XXXXX Series Specifications JIS symbol Descriptions U2 mm ø50 ø63 ctuation Double acting Working fluid ompressed air Max. working pressure MPa 1.0 Min.

More information

Cylinders HD1 Cylinders

Cylinders HD1 Cylinders Cylinders HD Cylinders Cylinders For Abusive Conditions Operating Parameters Reference Control Valves Cylinders Specialty Valves Production Devices Index Combining NFPA dimensional interchangeability and

More information

AIR AND HYDRAULIC CYLINDERS NFPA INDUSTRIAL TYPE

AIR AND HYDRAULIC CYLINDERS NFPA INDUSTRIAL TYPE AIR AND HYDRAULIC CYLINDERS NFPA INDUSTRIAL TYPE NFPA Industrial Type Cylinders TaskMaster Pneumatic Cylinders (to 200 psi) 1 1/2" - 4" Bores 5" & 6" Bores Profile Design External Tie Rods PowerMaster

More information

LRA/8000/M/EX, LRA/8000/EX, ISO cylinder Magnetic & Non-magnetic piston, double acting

LRA/8000/M/EX, LRA/8000/EX, ISO cylinder Magnetic & Non-magnetic piston, double acting > > Ø 32... 320 mm > > Comprehensive range for the utmost versatility > > Wide temperature range > > Supplied complete with piston rod locknut > > Conforms to ISO 15552 (ISO 6431, VDM 24562 and NFE 49-003-1)

More information

2A Pneumatic Cylinders

2A Pneumatic Cylinders A Pneumatic Cylinders Steel-bodied tie rod cylinders for working pressures up to bar Mounting Styles A Cylinder Mounting Styles The standard range of Parker A cylinders comprises mounting styles, to suit

More information

MA SERIES. Medium-Duty Pneumatic Cylinders Pressure Rating 200 PSI

MA SERIES. Medium-Duty Pneumatic Cylinders Pressure Rating 200 PSI MA SIS Medium-Duty Pneumatic Cylinders Pressure ating 200 PSI Construction DIMNSIONALL INTCHANGABL TO MT ANSI SPCIFICATIONS 1,2 Head & Cap High strength aluminum alloy is used for both head and cap. They

More information

RA/28000, RA/ Pneumatic Cylinders ISO 6431, VDMA and NFE Non-magnetic and Magnetic, Single Acting 32 to 100 mm

RA/28000, RA/ Pneumatic Cylinders ISO 6431, VDMA and NFE Non-magnetic and Magnetic, Single Acting 32 to 100 mm Pneumatic Cylinders ISO 6431, VDMA 24562 and NFE 49-003-1 Non-magnetic and Magnetic, Single Acting 32 to 100 mm ugged tie rod construction Polyurethane seals ensure efficient low friction operation and

More information

Strokes (mm) N/en

Strokes (mm) N/en IVC cleanline Cylinder double acting, magnetic piston 32... 100 mm Cylinders and mountings conform to ISO 15552 Complete functional unit with LED display Central electrical connector, polarity-safe Integrated

More information

Cylinders Small Bore Tie Rod

Cylinders Small Bore Tie Rod Cylinders Small Bore Tie Rod Reference Control Valves Cylinders Specialty Valves Production Devices Index Cylinder Materials Heads: Tubes: Piston: Rod: Bearing: Piston and Rod Seals: Rod Wiper: Tie Rods:

More information

Tie-rod Cylinders, ISO 6431, ISO compliant Series 60

Tie-rod Cylinders, ISO 6431, ISO compliant Series 60 Tie-rod Cylinders, ISO 6431, ISO 15552 compliant Series 60 Single or double-acting, magnetic, cushioned Standard and low friction versions ø 32, 40, 50, 63, 80, 100, 125 mm In compliance with ISO 15552

More information

Series CP95. Profile Design ISO/VDMA Air Cylinder. Increased kinetic energy absorption. Improved end of stroke cushion capacity

Series CP95. Profile Design ISO/VDMA Air Cylinder. Increased kinetic energy absorption. Improved end of stroke cushion capacity Profile Design ISO/VDMA Air Cylinder Series CP95 Improved end of stroke cushion capacity Piston rod lurching has been eliminated at the end of stroke positions by means of a floating seal mechanism. Increased

More information

Extruded Body Cylinders, ISO 6431, ISO compliant Series 61

Extruded Body Cylinders, ISO 6431, ISO compliant Series 61 1 ISO / VDMA Cylinders NORTH AMERICAN CYLINDER & ACTUATOR CATALOG > Release 8.5 Extruded Body Cylinders, ISO 6431, ISO 15552 compliant Series 61 Single or double-acting, magnetic, cushioned Standard and

More information

Features. when stopping. Various mounting styles. Rod type. Bore size (Heavy Duty) (Standard)

Features. when stopping. Various mounting styles. Rod type. Bore size (Heavy Duty) (Standard) Features Symbol Standard tie rod type hydraulic cylinder Double acting hydraulic cylinder for 70 kgf/cm 2 or 140kgf/cm 2 with bore sizes from 40 to 250. High performance cushion to reduce shock Double

More information

LRM/55401/M, Roundline cylinder Magnetic piston, double acting

LRM/55401/M, Roundline cylinder Magnetic piston, double acting LRM/5540/M, Roundline cylinder > > 3... 00 mm > > Clean line design > > Low friction, long life seals > > Standard magnetic piston for full control system versatility > > Non-lube operation > > Shock and

More information

V160C. Mould Hydraulic Systems. Hydraulic cylinders-iso 6020/2 compact 160 bar V160C

V160C. Mould Hydraulic Systems. Hydraulic cylinders-iso 6020/2 compact 160 bar V160C V160C Mould Hydraulic Systems Hydraulic cylinders-iso 6020/2 compact 160 bar V160C V160Ccat.GB01-2006 Hydraulic cylinders-iso 1 2 Chrome-plated steel rod, hardened or tempered and polished. Thickness of

More information

RA/192000/M. Compact cylinder ISO Magnetic piston, double acting Ø 20 to 125 mm

RA/192000/M. Compact cylinder ISO Magnetic piston, double acting Ø 20 to 125 mm Compact cylinder ISO 2287 Magnetic piston, double acting Ø 20 to 25 mm Conforms to ISO 2287 M/50 switches can be mounted flush with the profile Magnetic piston as standard Seals ensure low friction operation

More information

TAS SERIES TAB

TAS SERIES TAB TAS SERIES TAB 101 HH - Heavy Duty Floating Rod Bushing SELF ALIGNMENT FEATURE Rod Bushing is designed to float.002 to improve bearing surface alignment. SERIES TAS (NFPA) CYLINDER Duty s Reduces cylinder

More information

PRA/181000, PRA/181000/M PRA/183000, PRA/183000/M

PRA/181000, PRA/181000/M PRA/183000, PRA/183000/M PA/181000, PA/181000/M PA/183000, PA/183000/M Profile barrel with concealed tie rods Pneumatic Cylinders ISO 6431, VDMA 24562 and NFE 49-003-1 Non-magnetic and Magnetic Piston Single Acting 32 to 100 mm

More information

SERIES PA PNEUMATIC CYLINDERS FOR VALVE ACTUATION BORE SIZE: 3 1/4 TO 20 RATING: 150 PSIG (1000 KPA)

SERIES PA PNEUMATIC CYLINDERS FOR VALVE ACTUATION BORE SIZE: 3 1/4 TO 20 RATING: 150 PSIG (1000 KPA) BORE SIZE: 3 /4 TO 0 RATING: 50 PSIG (000 KPA) PNEUMATIC CYLINDERS FOR VALVE ACTUATION FEATURES THE PA SERIES OF VALVE ACTUATORS ARE DESIGNED TO AUTOMATE VALVE OPERATION. THESE ACTUATORS CAN BE ADAPTED

More information

SMA Aluminum Cylinders

SMA Aluminum Cylinders SMA Aluminum Cylinders PNEUMATIC TO 200 PSI HYDRAULIC 250 TO 400 PSI Non shock /8,, 2, 3 BORE SPACE SAVING AND CONVENTIONAL DESIGNS REPAIRABLE Very high quality Pancake type cylinders with all of the engineering

More information

EQ Series OEM Aluminum NFPA Interchangeable Cylinder Line

EQ Series OEM Aluminum NFPA Interchangeable Cylinder Line Series OEM Aluminum NFPA Interchangeable Cylinder Line www.numatics.com Table of Contents EQ Series Features and Benefits 3 Standard Mounts 4 How to Order 5 Rod Ends 6 Dimensions 7 How to Order - EQ Series

More information

Air Cylinders. Fine Quality. Precision Engineered. Advanced Design. Excellent Prices S T C. Tel:

Air Cylinders. Fine Quality. Precision Engineered. Advanced Design. Excellent Prices S T C. Tel: Air Cylinders Precision Engineered Fine Quality Excellent Prices Advanced Design connects fluid power to industrial automation Tel: 650-856 8833 www.stcvalve.com H1 83 Contents Air Cylinder Numbering System

More information

Dimensional Data Clevis / Brackets / Pins / rod Eyes

Dimensional Data Clevis / Brackets / Pins / rod Eyes Dimensional Data levis / Brackets / Pins / rod yes W B W +.00 +.00 rod LVIS R KK THRD Load (tension) (lbs) Size Part # ode KK B R W R Part # ode 15-7-1001 101,80 7/16-0 / 11/ / 1/ 11/ 1/ 1/ 5/8 15-7-1001

More information

MULTI-STAGES NFPA STYLE MOUNT

MULTI-STAGES NFPA STYLE MOUNT ULTI-STGES NFP STYLE OUNT WWW.STRYL.O ore size from 1½" to 10" Stroke up to 12" High Flow Design 250 PSI IR, Two-Year Warranty N.F.P. Style ount HEY DUTY - HIGH FLOW 3 SERIES ULTI-STGES IR YLINDERS 3 ULTISTGE

More information

SMA Aluminum Cylinders

SMA Aluminum Cylinders SMA Aluminum Cylinders PNEUMATIC TO 200 PSI HYDRAULIC 250 TO 400 PSI Non shock 1 1/8, 1, 2, 3 BORE SPACE SAVING AND CONVENTIONAL DESIGNS REPAIRABLE Very high quality Pancake type cylinders with all of

More information

7" & 8" Bore High Pressure zhc03 Hydraulic Cylinders Series 3H

7 & 8 Bore High Pressure zhc03 Hydraulic Cylinders Series 3H 7" & " ore High Pressure zhc0 Hydraulic ylinders Series H Heavy Duty Service Industrial Tie-od onstruction Nominal Pressure 000 PSI Fifteen Standard Mounting Styles For ylinder Division Plant Locations

More information

Aluminium tube and profile

Aluminium tube and profile > Series 63 cylinders CATALOGUE > 206 Series 63 cylinders - Aluminium tube and profile New Single and double-acting, magnetic, cushioned Versions: standard, low friction, high and low temperatures ø 32,

More information