Stainless steel piston rod. Low-friction piston rod seal. ouble and single-acting versions Smooth stainless steel cylinder tube. The Parker Pneumatic

Transcription

1 atalog 0923/NA (10/01)

2 Stainless steel piston rod. Low-friction piston rod seal. ouble and single-acting versions Smooth stainless steel cylinder tube. The Parker Pneumatic P1A range of cylinders is intended for use in a wide range of applications. These cylinders are particularly suitable for lighter duties in the packaging, food and textile industries. ygienic design, the use of corrosionresistant materials and initial lubrication with our food-grade grease makes the cylinders suitable for food industry applications. Thorough design and high quality manufacturing throughout ensure long service life and optimum performance. Mounting dimensions are in accordance with ISO 6432 and ETOP RP52P. This greatly simplifies installation and worldwide interchangeability. P1A cylinders are available in bore sizes of 10, 12, 16, 20 and 25, with stroke lengths from 10 to 320. Single-acting cylinders with spring return in the retract direction are available in stroke lengths up to 80. Single-acting cylinders with spring return in the extend direction are available in 16, 20 and 25 bore sizes and with stroke lengths up to 80.! WARNING Magnet for proximity sensing. Low-friction piston. Aluminium anodized end caps. ylinder design conforms to ISO 6432 for simple design and integration with equipment. Fully interchangeable with all ISO standard mini-cylinders. ylinders are supplied complete with neck mounting and piston rod nut. ouble-acting cushioned cylinders Adjustable pneumatic cushioning permits greater loads and higher operating speeds, making the cylinders suitable for more demanding applications. These cylinders are available in bores of 16, 20 and 25, with stroke lengths from 20 to 500. Options In addition to a wide range of standard cylinders, Mini ISO cylinders are available in several custom variations, such as non-standard stroke length, extended piston rods, double piston rods, high and low-temperature versions etc. In addition, a complete range of sensors and fittings are also available. ontents Page General 1 P1A - Main ata 2 Ordering ata 4 imensional ata, Mountings and Accessories 5-9 Sensors FAILURE OR IMPROPER SELETION OR IMPROPER USE OF TE PROUTS AN/OR SYSTEMS ESRIE EREIN OR RELATE ITEMS AN AUSE EAT, PERSONAL INJURY AN PROPERTY AMAGE. This document and other information from, its subsidiaries and authorized distributors provide product and/or system options for further investigation by users having technical expertise. It is important that you analyze all aspects of your application, including consequences of any failure and review the information concerning the product or system in the current product catalog. ue to the variety of operating conditions and applications for these products or systems, the user, through its own analysis and testing, is solely responsible for making the final selection of the products and systems and assuring that all performance, safety and warning requirements of the application are met. The products described herein, including without limitation, product features, specifications, designs, availability and pricing, are subject to change by Parker annifin orporation and its subsidiaries at any time without notice. Offer of Sale The items described in this document are hereby offered for sale by, its subsidiaries or its authorized distributors. This offer and its acceptance are governed by the provisions stated on the separate page of this document entitled "Offer of Sale".

3 Effective cushioning The Mini ISO range is available with bumpers or with adjustable pneumatic cushioning. ontrolled by simple bleed screws for fine adjustment, the adjustable cushioned cylinders can be operated with higher mass loads and at higher speeds than those with fixed end cushioning bumpers. Smooth external design There are no recesses or pockets in the end covers that could trap dirt or liquid, making cleaning simple and effective. orrosion-resistant Even the basic versions of the cylinders have good corrosion resistance through appropriate choice of materials and surface treatment, allowing them to be used directly in demanding environments. Stainless steel versions The Mini ISO range is also available in an all-stainless version with piston rod, barrel and end covers of stainless steel for use in particularly severe environments. onsult the ylinder ivision for more information. Proximity sensing A complete range of sensors for proximity sensing is available as accessories: both reed switch and Solid State sensors are available. Either can be supplied with flying leads or cable plug connector. Options In addition to the basic versions, a number of custom versions of Parker Pneumatic cylinders are available to meet exacting demands on function and environmental adaptation: Non-standard stroke lengths Extended piston rods ouble piston rods ouble, hollow piston rods Single acting cylinder with spring return (in the retract direction). Single acting cylinder with spring return in the spring extend direction (piston rod in extended position) igh-temperature cylinder versions for use in ambient temperatures ranging from -10 to +150 for bores 20 and 25 and -10 to +120 for bores 10, 12 and 16 Low-temperature cylinder versions for ambient temperatures ranging from -40 to +60 PTFE and copper free cylinders ylinders with outer sealings in fluorcarbon Stainless steel cylinders, consult the ylinder ivision for more information. ouble-acting, cushioned stroke ouble-acting, adjustable cushioning ouble-acting, double rod Single-acting, spring return Single-acting, spring-extend 1

4 Main data ylinder ylinder Piston rod Total mass Air onn. Model # bore area ia. area thread at 0 addition consump- thread stroke per 10 tion cm 2 cm 2 lbs. stroke ouble acting, cushioned stroke P1A-S ,78 4 0,13 M ) M5 P1A-S ,13 6 0,28 M ) M5 P1A-S ,01 6 0,28 M ) M5 P1A-S ,14 8 0,50 M ) G1/8 P1A-S , ,78 M10x1, ) G1/8 ouble acting, adjustable cushioning P1A-S 016 M 16 2,01 6 0,28 M ) M5 P1A-S 020 M 20 3,14 8 0,50 M ) G1/8 P1A-S 025 M 25 4, ,78 M10x1, ) G1/8 Single acting P1A-S 010 SS 10 0,78 4 0,13 M ) M5 P1A-S 012 SS 12 1,13 6 0,28 M ) M5 P1A-S 016 SS(TS) 16 2,01 6 0,28 M ) M5 P1A-S 020 SS(TS) 20 3,14 8 0,50 M ) G1/8 P1A-S 025 SS(TS) 25 4, ,78 M10x1, ) G1/8 1) Free air consumption per 10 stroke length for a double stroke at 6 bar (87 PSI) ylinder forces Indicated cylinder forces are theoretical and should be reduced according to the working conditions. Model # ylinder- Theoretical piston force bore at 87 PSI plus stroke minus stroke Lbs. Lbs. ouble acting P1A-S P1A-S P1A-S P1A-S P1A-S P1A-S 016 M P1A-S 020 M P1A-S 025 M Additional data Working pressure Working temperature igh-temperature version max 10bar (145 PSI) max 80 (176 F) min 20 (4 F) max +150 (Ø20 and 25 ) 302 F max +120 (Ø10, 12 and 16 ) 248 F min F Low-temperture version max F min F Prelubricated, further lubrication is not normally necessary. If additional lubrication is introduced it must be continued. Theoretical piston force at 6 ar (87 PSI) Model # Spring retraction Spring extension Lbs. max Lbs. min Lbs. max Lbs. min Single acting P1A-S 010 SS P1A-S 010 SS P1A-S 010 SS P1A-S 010 SS P1A-S 010 SS P1A-S 010 SS P1A-S 012 SS P1A-S 012 SS P1A-S 012 SS P1A-S 012 SS P1A-S 012 SS P1A-S 012 SS P1A-S 016 SS(TS) (19.1) (18.89) 4.72 (4.27) 4.05 (4.05) P1A-S 016 SS(TS) (19.3) (18.89) 4.72 (4.27) 3.83 (3.83) P1A-S 016 SS(TS) (19.8) (18.89) 4.72 (4.27) 3.372(3.372) P1A-S 016 SS(TS) (20.3) (18.89) 5.62 (4.27) 3.15 (3.15) P1A-S 016 SS(TS) (20.4) (18.89) 5.62 (4.27) 2.7 (2.7) P1A-S 016 SS (21.36) (18.89) 5.62 (4.27) 2.92 (2.92) P1A-S 020 SS(TS) (29.67) (29.25) 6.1 (6.3) 5.63 (5.8) P1A-S 020 SS(TS) (29.89) (29.25) 6.1 (6.3) 5.4 (5.6) P1A-S 020 SS(TS) (30.35) (29.25) 6.1 (6.3) 4.72 (5.18) P1A-S 020 SS(TS) (31) (29.25) 6.5 (6.3) 4.95 (4.95) P1A-S 020 SS(TS) (31.47) (29.25) 6.5 (6.3) 4.5 (4.5) P1A-S 020 SS(TS) (31.24) (24.28) 6.1 (11.25) 4.05 (4.27) P1A-S 025 SS(TS) (46.1) 56.9 (45.66) 9.22 (9.9) 8.55 (9.45) P1A-S 025 SS(TS) (46.55) 56.9 (45.66) 9.22 (9.9) 8.1 (9) P1A-S 025 SS(TS) (47.23) 56.9 (45.66) 9.22 (9.9) 7.2 (8.32) P1A-S 025 SS(TS) (48.13) (45.66) 9.9 (9.9) 7.42 (7.43) P1A-S 025 SS(TS) (48.8) (45.66) 9.9 (9.9) 6.75 (6.75) P1A-S 025 SS(TS) (50.16) (46.33) 9.67 (9.22) 6.75 (5.4) 2

5 ushioning diagram Use the diagram below to determine the necessary size of cylinder to provide the requisite cushioning performance. The maximum cushioning performance, as indicated in the diagram, is based on the following assumptions: - Low load, i.e. low pressure drop across the piston - Steady-state piston speed - orrectly adjusted cushioning screw The load is the sum of the internal and external friction, together with any gravity forces. At high relative loading it is recoended that, for a given speed, the load should be reduced by a factor of 2.5, or that, for a given mass, the speed should be reduced by a factor of 1.5. These factors apply in relation to the maximum performance as shown in the diagram. Fixed end-cushioning (umpers) Speed Ft./Sec Adjustable pneumatic end-cushioning Speed Ft./Sec Ø25 Ø25 Ø20 Ø16 Ø12 Ø Ø20 Weight Lbs Weight Lbs. aution efore attempting any external or internal work on the cylinder or any connected components, make sure the cylinder is vented and disconnect the air supply in order to ensure isolation of the air supply. 66 Material specification Piston rod Stainless steel, IN X 10 rnis 18 9 Piston rod seal Fluorocarbon rubber FPM Piston rod bearing Multilayer PTFE/steel End covers Anodized aluminium O-ring, internal Nitrile rubber, NR ylinder barrel Stainless steel, IN X 5 rni Piston, complete Nitrile rubber, NR/steel Magnet holder Thermoplastic elastomer Magnet Plastic-coated magnetic material Return spring Surface-treated steel ushioning screw Stainless steel, IN X 10 rnis 18 9 Variants Mini ISO: Low-temperature version, type L: Piston rod seal Piston complete igh-temperature version, type F: Nitrile rubber, NR Nitrile rubber, NR/steel Piston rod seal Fluorocarbon rubber, FPM Piston complete, Ø10-Ø16 NR/steel Piston complete, Ø20-Ø25 FPM/steel PTFE and copper free cylinders, type N: Piston rod bearing PA plastic ylinders with outer sealings in fluorcarbon, type V: Piston rod seal/ Scraper ring Note: Spare part = new cylinder Fluorocarbon rubber, FPM Note Air quality is essential for maximum cylinder service life. Note All technical data in this catalog are typical data only. 3

6 Order key P1A S 016 M S 0025 ylinder bore Stroke length M F K P S T ylinder type / function ouble-acting, adjustable cushioning. Ø Not for sealing material type F and L ouble-acting, umpers, Ø10 - Ø25 ouble-acting, adjustable cushioning, double rod, Ø Not for sealing material type F and L ouble-acting, umpers, double rod, Ø10 - Ø25 ouble-acting, adjustable cushioning, double (hollow), Ø20-25, max. stroke 125. Not for sealing material type F and L ouble-acting, umpers, double rod (hollow), Ø20-25, max. stroke 125 Single-acting, umpers, spring return for retract stroke, Ø10-25 Single-acting, umpers, spring return for advance stroke, Ø16-25 S Stroke length, E.g = 25 For standard stroke length and max length see tabel below. Sealing material Standard,-20 to +80. (4 F to 176 F) Magnetic piston F igh temperature, Ø10, 12 and to (14 F to 248 F) Ø20 and to (14 F to 302 F) Non magnetic piston L N V Low temperature, -40 to +60. (40 F to 140 F) Non magnetic piston No PTFE or copper. Standard seals, -20 to +60. (14 F to 248 F) Magnetic piston External seals of fluorinated rubber. -20 to +80. (14 F to 248 F) Magnetic piston ylinder ylinder Standard stroke length in Non standard stroke length Model Number bore * * 80* 100* 125* 160* 200* 250* 320* 400* 500* ouble acting with fixed end-cushioning: P1A-S P1A-S P1A-S P1A-S P1A-S ouble acting with adjustable end-cushioning: P1A-S 016 M 16 P1A-S 020 M 20 P1A-S 025 M 25 Single acting: P1A-S 010 SS 10 P1A-S 012 SS 12 P1A-S 016 SS(TS) 16 ** P1A-S 020 SS(TS) 20 P1A-S 025 SS(TS) 25 *Standard stroke lenghts in according to ISO 4393 ** Not for the TS version 4

7 ouble acting cylinders ouble piston rod ØE ØKK imensions ØE Ø AF F W + stroke L P ZJ X ylinder bore AM 0/-2 E AF F 9 EE EW KK L SW W±1, M12x1, ,0 4 M5 8 16,7 M M16x1, ,0 6 M ,1 M ) 16 M16x1, ,0 6 M ,1 M ) 16 M16x1, ,0 6 M ,0 M M22x1, ,0 8 G1/ ,0 M M22x1, ,5 8 G1/ ,0 M10x1, ) P1A-S016S/SS/TS 2) P1A-S016MS ouble acting cylinders ylinder bore X ZJ P stroke 84 + stroke 46 + stroke stroke 99 + stroke 48 + stroke stroke stroke 53 + stroke stroke stroke 67 + stroke stroke stroke 68 + stroke Single-acting, spring return, type SS Stroke/ ylinder bore X X X X X X ZJ ZJ ZJ ZJ ZJ ZJ P P P P P P Single-acting, spring-extended, type TS Stroke/ ylinder bore X 3) X 3) X 3) X 3) X 3) X 3) ZJ 3) ZJ 3) ZJ 3) ZJ 3) ZJ 3) ZJ 3) P P P P P P ) With piston rod retracted, as shown in the dimension drawing Length tolerances ±1 Stroke length tolerances +1,5/0 EE AF W AM ØKK ØE SW EW Single Acting 5

8 ata Working pressure max. 10 bar (145 PSI) Working temperature max. +80 (176 F) min. 20 (4 F) ouble-acting Fixed end cushioning (umpers) yl.bore Stroke Order code P1A-S010S P1A-S010S P1A-S010S P1A-S010S P1A-S010S P1A-S010S P1A-S010S P1A-S010S P1A-S010S-0100 onn. M5 125 P1A-S010S P1A-S012S P1A-S012S P1A-S012S P1A-S012S P1A-S012S P1A-S012S P1A-S012S P1A-S012S P1A-S012S P1A-S012S P1A-S012S-0160 onn. M5 200 P1A-S012S P1A-S016S P1A-S016S P1A-S016S P1A-S016S P1A-S016S P1A-S016S P1A-S016S P1A-S016S P1A-S016S P1A-S016S P1A-S016S-0160 onn. M5 200 P1A-S016S-0200 ouble-acting Fixed end cushioning (umpers) yl.bore Stroke Order code P1A-S020S P1A-S020S P1A-S020S P1A-S020S P1A-S020S P1A-S020S P1A-S020S P1A-S020S P1A-S020S P1A-S020S P1A-S020S P1A-S020S P1A-S020S-0250 onn. G1/8 320 P1A-S020S P1A-S025S P1A-S025S P1A-S025S P1A-S025S P1A-S025S P1A-S025S P1A-S025S P1A-S025S P1A-S025S P1A-S025S P1A-S025S P1A-S025S P1A-S025S-0250 onn. G1/8 320 P1A-S025S-0320 ylinders are supplied complete with nose mounting and piston rod nuts. ylinders with double piston rods are supplied with two piston rod nuts and one nose mounting nut. 6

9 ata Working pressure max. 10 bar (145 PSI) Working temperature max. +80 (176 F) min. 20 (4 F) Single-acting Fixed end cushioning (umpers) yl.bore Stroke Order code P1A-S010SS P1A-S010SS P1A-S010SS P1A-S010SS P1A-S010SS-0050 onn. M5 80 P1A-S010SS P1A-S012SS P1A-S012SS P1A-S012SS P1A-S012SS P1A-S012SS-0050 onn. M5 80 P1A-S012SS P1A-S016SS P1A-S016SS P1A-S016SS P1A-S016SS P1A-S016SS-0050 onn. M5 80 P1A-S016SS P1A-S020SS P1A-S020SS P1A-S020SS P1A-S020SS P1A-S020SS-0050 onn. G1/8 80 P1A-S020SS P1A-S025SS P1A-S025SS P1A-S025SS P1A-S025SS P1A-S025SS-0050 onn. G1/8 80 P1A-S025SS-0080 Single-acting Fixed end cushioning (umpers) yl.bore Stroke Order code P1A-S016TS P1A-S016TS P1A-S016TS P1A-S016TS-0040 onn. M5 50 P1A-S016TS P1A-S020TS P1A-S020TS P1A-S020TS P1A-S020TS P1A-S020TS-0050 onn. G1/8 80 P1A-S020TS P1A-S025TS P1A-S025TS P1A-S025TS P1A-S025TS P1A-S025TS-0050 onn. G1/8 80 P1A-S025TS-0080 ouble-acting Adjustable cushioning yl.bore Stroke Order code P1A-S016MS P1A-S016MS P1A-S016MS P1A-S016MS P1A-S016MS P1A-S016MS P1A-S016MS P1A-S016MS P1A-S016MS P1A-S016MS P1A-S016MS P1A-S016MS P1A-S016MS-0400 onn. M5 500 P1A-S016MS P1A-S020MS P1A-S020MS P1A-S020MS P1A-S020MS P1A-S020MS P1A-S020MS P1A-S020MS P1A-S020MS P1A-S020MS P1A-S020MS P1A-S020MS P1A-S020MS P1A-S020MS-0400 onn. G1/8 500 P1A-S020MS P1A-S025MS P1A-S025MS P1A-S025MS P1A-S025MS P1A-S025MS P1A-S025MS P1A-S025MS P1A-S025MS P1A-S025MS P1A-S025MS P1A-S025MS P1A-S025MS P1A-S025MS-0400 onn. G1/8 500 P1A-S025MS-0500 ylinders are supplied complete with nose mounting and piston rod nuts. ylinders with double piston rods are supplied with two piston rod nuts and one nose mounting nut. 7

10 Flange-MF8 ylinder mountings Type escription yl. bore Weight Order code in Lbs. Intended for fixed attachment of the cylinder. The flange is designed for mounting on the front or rear end-covers. Surface-treated steel ylinder A E F Ø 10 4, , , , Foot-MS3 This mounting is also available in stainless steel. onsult the ylinder ivision for additional information. Intended for fixed attachement of the cylinder. The bracket is designed for mounting on the front or rear end-covers. Surface-treated steel This mounting is also available in stainless steel. onsult the ylinder ivision for additional information. ylinder A E F G I Ø 10 4, , , , , , , , over trunnion Intended for articulated mounting of the cylinder. The flange is designed for mounting on the front or rear endcovers. Stainless steel, IN X 10 rnis 18 9 ylinder A h14 E e9 F G Ø 10 12, , , , Mounting nut Intended for fixed mounting of the cylinder. ylinders are supplied complete with one mounting nut. Galvanized steel ylinder A Ø M12x1, M16x1, M22x1,50 This nut is also available in stainless steel. onsult ylinder ivision for further information P1A-4M P1A-4M P1A-4M A P1A-4MF P1A-4MF P1A-4MF G E A I F P1A-4MJ P1A-4MJ P1A-4MJ E ØF ØA A E G F 8

11 ylinder mountings Type escription yl. bore Weight Order code in Lbs. levis bracket Intended for articulated mounting of the cylinder. Supplied with shaft for mounting on the rear end cover. racket: surface-treated steel, black Pin: surface hardened steel irclips: according to IN 471: Stainless steel This mounting is also available in stainless steel. onsult the ylinder ivision for additional information. ylinder A E F G I J Ø 10 4, , , , , , , , , , , , , , , levis According to ISO 8140 Intended for articulated mounting of the cylinder. This mounting is adjustable in the axial direction. Supplied complete with pin. Galvanized steel This mounting is also available in stainless steel. onsult the ylinder ivision for additional information. ylinder A E F G I J Ø 10 4 M4 2, ,0 2, M6 3, ,0 3, M8 4, ,5 3, M10x1,25 5, ,0 3,0 Swivel rod eye According to ISO 8139 Intended for articulated mounting of the cylinder. This mounting is adjustable in the axial direction. Swivel rod eye: Galvanized steel all: hardened steel This mounting is also available in stainless steel. onsult the ylinder ivision for additional information. ylinder A E F G I J K L Ø 10 5 M4 2, ,0 8 33,0 9 2, M6 3, ,8 9 38,5 11 1, M8 4, , ,0 14 2, M10x1,25 5, , ,5 17 2,5 Rod nut ylinder F E Ø 10 M4 7 2, M6 10 3,2 20 M8 13 4,0 25 M10x1, ,0 Intended for fixed mounting on the piston rod. ylinders are supplied complete with one rod nut. (cylinders with double piston rod are supplied with two rod nuts.) Galvanized steel This nut is also available in stainless steel. onsult the ylinder ivision for additional information P1A-4MT P1A-4MT P1A-4MT I P1A-4R P1A-4R 20.1 P1A-4R P1A-4JR I±J G E F A P1A-4RS P1A-4RS P1A-4RS P1A-4JRS E F J J±L G A I E F E F A G + S S=stroke 9

12 Reed switch sensors The reed switch sensors incorporate a well-proven, universal-voltage, compact reed switch element; making them suitable for a wide range of applications. They can work with electronic control systems or conventional relay systems. No environment is too severe. Technical data esign Reed Output Making Voltage range, P1A-2XRL 110 VA/V Voltage range, P1A-2XS 60 VA/V Max voltage drop 2,8 V Max load current 180 ma Max breaking power (resistive) 10 W Min actuating distance 5 ysteresis 2 Repeatability accuracy ±0,2 Max on/off switching frequency 500 z Max on/off switching time 1 ms Encapsulation, P1A-2XRL IP 67 Encapsulation, P1A-2XS IP 65 Temperature range 30 to +80 (22 F to 176 F) Indication LE Shock resistance 30 g Material, housing Nylon 66 Material, mould Epoxy able PV 2x0,2 2 able incl. female part connector PV 2x0,2 2 Mounting Mounting yoke Material, mounting Stainless steel Material, screw Stainless steel onnector iam. 8 snap on Ordering data Order code ylinder Output able Weight bore length Lbs. Reed sensors P1A-2XRL making 3 m.12 P1A-2XS making *.004 Mountngs for sensors P1A P1A P1A-2F P1A P1A-2J able for sensors ** 3 m ** 10 m.4 *) able shall be ordered separately. **) able including female part connector, for sensor. Reed sensor symbol rown lue Electronic sensors These sensors are of solid-state type, with no moving parts. Shortcircuit and transient protection is incorporated as standard. The integral electronics make these sensors suitable for applications with very high switching frequencies. Technical data esign all element Output PNP resp. NPN, N.O. Voltage range V Max permissible ripple 10% Max voltage drop 0,5 V at 100 ma Max load current, P1A-2XMK, LK 150 ma P1A-2XK, EK, J, F 100 ma Max breaking power (resistive) 6 W Internal consumption <30 ma at 30 V Min actuating distance 5 ysteresis 1,1-1,3 Repeatability accuracy ±0,1 Max on/off switching frequency 1 kz Max on/off switching time 0,8/3,0 ms Encapsulation, P1A-2XJ, F IP 65 Encapsulation, P1A-2XK, EK, MK, LK IP 67 Temperature range 10 to +60 (14 F to 140 F) Indication LE Shock resistance 40 g Material, housing Polyamid 11 Material, mould Epoxy able PV 3x0,15 2 able incl. female part connector PV 3x0,15 2 onnector iam. 8 snap on Mounting Mounting yoke Material, mounting Acetal/Stainless steel Material, screw Stainless steel Ordering data Order code ylinder Output able Weight bore length Lbs. Electronic sensors P1A-2XMK, PNP, N.O. 2 m.09 P1A-2XLK, NPN, N.O. 2 m.09 P1A-2XK PNP, N.O. 2 m.022 P1A-2XEK NPN, N.O. 2 m.022 P1A-2XJ PNP, N.O. *.033 P1A-2XF NPN, N.O. *.033 Mountngs for sensors P1A P1A P1A-2F P1A P1A-2J able for sensors ** 3 m ** 10 m.4 Electronic sensor symbol P1A-2XMK White P1A-2XK,P1A-2XJ lack Red lack rown lue P1A-2XLK White P1A-2XEK, P1A-2XF lack lack Red lue rown 10

13 imensions Reed sensors P1A-2XRL Electronic sensors P1A-2XK and P1A-2XEK 12 LE 13,8 P1A-2XMK and P1A-2XLK 3 x 0,15, 2 m LE ,5 2 x 0,2, 3 m 3 x 0,15, 2 m LE 12 P1A-2XS P1A-2XJ and P1A-2XF 13,8 32,5 onnector diam. 8, snap on onnector diam. 8, snap on 11