PDE2611TCUK-ca Air Preparation. Miniature FRL series. Miniature FRL Series. Parker Hannifin Corporation Pneumatic Division - Europe

Transcription

1 P26TUK-ca ir Preparation Miniature RL series Miniature RL Series 49 Parker Hannifin orporation Pneumatic ivision - urope

2 P26TUK-ca ir Preparation Miniature RL series - /8", /4" asic /8" ody 4 ilters - Miniature eatures xcellent water removal efficiency. Unique deflector plate that creates swirling of the air stream ensuring maximum water and dirt separation. micron element standard. High low: /8" dm 3 /s /4" dm 3 /s Twist rain utomatic rain utomatic rain ccepts 4mm /8" Tubing / x.7 I / tubing istance Required To Remove ll owls Regardless Of rain Option Port Size Poly owl Twist rain SPP utomatic Pulse rain /8" 4 4 /4" ilter imensions (mm) Standard part numbers shown. or other models refer to ordering information below. dm 3 /s = 6.2 bar inlet and.3 bar pressure drop. 8 4 With utomatic Pulse rain. Ordering Information 4 Port size /8 Inch /4 Inch owl options Twist drain utomatic pulse drain lements Micron lank Port type NPT SPP NOT: OL OPTIONS R STNR. Parker Hannifin orporation Pneumatic ivision - urope

3 P26TUK-ca ir Preparation Miniature RL series - ir Line ilters Technical Information Primary Pressure - bar 2.4 bar 6.2 bar.3 bar Primary Pressure - bar 2.4 bar 6.2 bar.3 bar Pressure drop - bar low characteristics 4* /8 Inch ports Pressure drop - bar low characteristics 4* /4 Inch ports 4 ilter Kits & ccessories owl Kits Poly owl utomatic Pulse rain...ps48p Twist rain...ps44p ilter lement Kits Micron...PS43P Mounting racket Kit... PS47P Specifications utomatic Pulse rain Tube arb... 4mm O / x.7 I / owl apacity... 3 cm 3 Port Threads.../8, /4 Inch Pressure & Temperature Ratings Polycarbonate owl... to.3 bar to 2 utomatic Pulse rain....7 to.3 bar at 2 or less Weight... 8 g Materials of onstruction ody... Zinc owl Transparent Polycarbonate eflector, lement Holder & affle... Plastic rains Twist rain ody & Stem... Plastic Seals...Nitrile utomatic Pulse rain Piston & Seals...Nitrile Stem, Seat, daptor & Washers... luminum ilter lements Micron (Standard)... Plastic Seals...Nitrile Parker Hannifin orporation Pneumatic ivision - urope

4 P26TUK-ca ir Preparation Miniature RL series - /8", /4" asic /8" ody oalescing ilters - Miniature eatures Removes liquid aerosols and sub-micron particles. Liquids gravitate to the bottom of the element and will not re-enter the airstream. Oil free air for critical applications, such as air gauging and pneumatic instrumentation and controls % OP efficiency. High low: Grade 6 lement /8" 8 dm 3 /s /4" 9 dm 3 /s utomatic rain ccepts 4mm /8" Tubing / x.7 I / tubing istance Required To Remove ll owls Regardless Of rain Option Port Size Poly owl Twist rain Standard part numbers shown. SPP utomatic Pulse rain /8" /4" oalescing ilter imensions (mm) , dm 3 /s = 6.2 bar inlet and.3 bar pressure drop. 3 4 With utomatic Pulse rain. Ordering Information - Port size /8 Inch /4 Inch owl options Twist drain utomatic pulse drain lements. um lank Port type NPT SPP NOT: OL OPTIONS R STNR. 2 Parker Hannifin orporation Pneumatic ivision - urope

5 P26TUK-ca ir Preparation Miniature RL series - oalescing ilters (Oil Removal) Technical Information Grade 6 Primary Pressure - bar 2.4 bar 6.2 bar.3 bar Primary Pressure - bar 2.4 bar 6.2 bar.3 bar.6.6 Pressure drop - bar low characteristics * /8 Inch ports Pressure drop - bar low characteristics * /4 Inch ports 2 2 oalescing ilter Kits & ccessories Materials of onstruction owl Kits Poly owl utomatic Pulse rain... PS48P Twist rain... PS44P ilter lement Kits. um... PS446P Mounting racket Kit... PS47P Specifications utomatic Pulse rain Tube arb... 4mm O / x.7 I / owl apacity...3cm 3 Operation Normal Operating Pressure rop.... bar Maximum Recommended Pressure rop....7 bar (lement should be replaced) Port Threads... /8, /4 Inch Pressure & Temperature Ratings Polycarbonate owl to.3 bar to 2 Weight... 8 g ody...zinc owls...transparent Polycarbonate rains Twist rain ody & Stem... Plastic Seals...Nitrile utomatic Pulse rain Piston & Seals...Nitrile Stem, Seat, daptor & Washers...luminum lement Holder... Plastic ilter lement orosilicate & felt glass fibers 99.97% OP efficiency Seals...Nitrile 3 Parker Hannifin orporation Pneumatic ivision - urope

6 P26TUK-ca ir Preparation Miniature RL series - /8", /4" asic /8" ody 4R Regulators - Miniature eatures Unbalanced poppet standard. Solid control piston with lip seal for extended life. Non-rising adjusting knob. ompact, 73,2mm high by 42mm wide. High low: /8" 6 dm 3 /s /4" 7 dm 3 /s 4R Port Size Without Gauge 8 bar - SP /8" 4R3 /4" 4R3 4R 4R Regulator imensions (mm) , 73 Standard part numbers shown bold. or other models refer to ordering information below. NOT: 3mm dia. hole required for panel mounting. dm 3 /s = 6.9 bar inlet, 6.2 bar no flow secondary setting and.7 bar pressure drop. Ordering Information 4 R 3 Port size Port size /8 Inch pipe /8 Inch gauge port /4 Inch pipe /8 Inch gauge port 3 Pressure range Without gauge - Yellow knob 2 bar 4 bar 8 bar G Relief Relieving Non-Relieving lank Port type NPT SPP NOT: OL OPTIONS R STNR. 4 Parker Hannifin orporation Pneumatic ivision - urope

7 P26TUK-ca ir Preparation Miniature RL series - ir Line Regulators Technical Information Relief and low haracteristics 4R3* Relief and low haracteristics 4R3* Secondary pressure - bar /8 Inch Ports 6.9 bar Primary Pressure Secondary pressure - bar /4 Inch Ports 6.9 bar Primary Pressure UTION: RGULTOR PRSSUR JUSTMNT The working range of knob adjustment is designed to permit outlet pressures within their full range. Pressure adjustment beyond this range is also possible because the knob is not a limiting device. This is a common characteristic of most industrial regulators, and limiting devices may be obtained only by special design. or best performance, regulated pressure should always be set by increasing the pressure up to the desired setting.! WRNING Product rupture can cause serious injury. o not connect regulator to bottled gas. o not exceed maximum primary pressure rating. 4R Regulator Kits & ccessories Specifications onnet ssembly Kit... L369 Gauges to 2 bar - /8...P3-KYN to 4 bar - /8...P3-KLN to bar - /8...P3-KNN Mounting racket Kit (Includes Panel Mount Nut) PS47P Panel Mount Nuts Plastic...P7862 Metal...P3 Service Kits Non-Relieving... PS422P Relieving... PS423P Gauge Ports (2)... /8 (an be used for ull low) Port Threads... /8, /4 Inch Pressure & Temperature Ratings to 2.7 bar to 2 Secondary Pressure Ranges Standard Pressure... to 8 bar Medium Pressure... to 4 bar Medium Pressure... to 2 bar Weight 4R... 4 g Materials of onstruction djusting Nut... rass djusting Stem & Spring...Steel ody...zinc onnet, Seat, Piston & Valve Poppet... Plastic Seals...Nitrile Parker Hannifin orporation Pneumatic ivision - urope

8 P26TUK-ca ir Preparation Miniature RL series - /8", /4" asic /8" ody 4 ilter / Regulator - Miniature eatures xcellent water removal efficiency. Unbalanced poppet standard. Solid control piston for extended life. Space saving package offers both filter and regulator features in one integral unit. Non-rising adjustment knob. Two full flow /8" gauge ports. High low: /8" 7 dm 3 /s /4" 8 dm 3 /s utomatic rain ccepts 4mm /8" Tubing / x.7 I / tubing istance Required To Remove ll owls Regardless Of rain Option Port 8 bar - SPP Size Twist rain utomatic Pulse rain Poly owl /8" /4" Standard part numbers shown. or other models refer to ordering information below. dm 3 /s = 6.9 bar inlet, 6.2 bar no flow secondary setting and.7 bar pressure drop. NOT: 3mm hole required for panel mounting. 4 ilter / Regulator imensions (mm) With uto rain 6 8 Ordering Information 4 3 Port size owl options lements Relief Port type /8 Inch /4 Inch Twist drain utomatic drain Micron G Relieving Non-Relieving lank NPT SPP 3 Pressure range Without gauge - Yellow knob 2 bar 4 bar 8 bar NOT: OL OPTIONS R STNR. 6 Parker Hannifin orporation Pneumatic ivision - urope

9 P26TUK-ca ir Preparation Miniature RL series - ilter / Regulator "Piggybacks" Technical Information Relief and low haracteristics 43* Relief and low haracteristics 43* 6 /8 Inch Ports 6.9 bar Primary Pressure 6 /4 Inch Ports 6.9 bar Primary Pressure Secondary pressure - bar Secondary pressure - bar UTION: RGULTOR PRSSUR JUSTMNT The working range of knob adjustment is designed to permit outlet pressures within their full range. Pressure adjustment beyond this range is also possible because the knob is not a limiting device. This is a common characteristic of most industrial regulators, and limiting devices may be obtained only by special design. or best performance, regulated pressure should always be set by increasing the pressure up to the desired setting.! WRNING Product rupture can cause serious injury. o not exceed maximum primary pressure rating. 4 ilter / Regulator Kits & ccessories owl Kits Poly owl utomatic rain... PS48P Twist rain... PS44P ilter lement Kits 4 Micron... PS4P Micron... PS43P Gauges to 2 bar - /8...P3-KYN to 4 bar - /8...P3-KLN to bar - /8...P3-KNN Mounting racket Kit (Includes Panel Mount Nut)...PS47P Panel Mount Nut...P7862 Service Kits Non-Relieving... PS422P Relieving... PS423P Specifications utomatic Pulse rain Tube arb...4mm O / x.7 I / owl apacity... 3 cm 3 Gauge Ports (2) (an be used for ull low)... /8 Inch Port Threads... /8, /4 Inch Pressure & Temperature Ratings Polycarbonate owl... to.3 bar, to 2 Secondary Pressure Ranges Standard Pressure... to 8 bar Medium Pressure... to 2 bar Medium Pressure... to 4 bar Weight... 8 g Materials of onstruction djusting Nut... rass djusting Stem & Spring... Steel ody... Zinc onnet, Knob, Seat, Piston, Holder & eflector...plastic owl vailable Transparent... Polycarbonate rains Manual Twist Type ody & Stem...Plastic Seals... Nitrile utomatic Pulse Type Piston & Seals... Nitrile Stem, Seat, daptor & Washers... luminum ilter lements Micron (Standard)...Plastic Seals...Nitrile 7 Parker Hannifin orporation Pneumatic ivision - urope

10 P26TUK-ca ir Preparation Miniature RL series - /8", /4" asic /8" ody 4L Mist Lubricators - Miniature eatures Proportional oil delivery over a wide range of air flows. Precision needle valve assures repeatable oil delivery and provides simple adjustment of delivery rate. Ideal for low and high flow applications with changing air flow. Transparent sight dome for 36 visibility. High low: /8" 9 dm 3 /s /4" dm 3 /s istance Required To Remove ll owls Regardless Of rain Option Port SPP Size No rain Poly owl /8" 4LG /4" 4LG 4L Lubricator imensions (mm) 44 4 Standard part numbers shown bold. or other models refer to ordering information below. dm 3 /s = 6.2 bar inlet and.3 bar pressure drop Ordering Information 4 L G - Port size Port type /8 Inch lank NPT /4 Inch SPP NOT: OL OPTIONS R STNR. 8 Parker Hannifin orporation Pneumatic ivision - urope

11 P26TUK-ca ir Preparation Miniature RL series - ir Line Mist Lubricator Technical Information Primary Pressure - bar 2.4 bar 6.2 bar.3 bar.6. Pressure drop - bar low characteristics. 4LG* /8 Inch ports Primary Pressure - bar 2.4 bar 6.2 bar.3 bar.6. Pressure drop - bar low characteristics. 4LG* /4 Inch ports L Mist Lubricator Kits & ccessories owl Kits Poly owl No rain... PS42P Specifications owl apacity... 3 cm 3 Minimum low for Lubrication....2 dm 3 /s at 6.9 bar Port Threads... /8, /4 Inch Pressure & Temperature Ratings Polycarbonate owl to.3 bar to 2 Weight... 8 g Materials of onstruction ody... Zinc owls Transparent... Polycarbonate Seals... Nitrile Sight ome... Polycarbonate 9 Parker Hannifin orporation Pneumatic ivision - urope

12 P26TUK-ca ir Preparation Miniature RL series Mounting racket Kits G J H K Typ. G J H K Typ. L M L M PS47P (Includes Panel Mount Nut) PS49 imensions (mm) G H J K L M Kit PS47P (, 4, 4R, 4) PS49 (4L) 6 Parker Hannifin orporation Pneumatic ivision - urope