Husky 1050 Plastic Pumps Air-Operated Double Diaphragm

Transcription

1 PRT NO. ONFIGURTION NO. SERIL NO. TE OE SERIES MX WPR PSI-bar ME IN Husky 15 Plastic Pumps ir-operated ouble iaphragm Husky 15 Selector Tool To order a Husky 15, use the online selector tool at or contact your distributor. Pump I NOTE: Options for seats, check balls, diaphragms, and seals vary for the 15, 15, 15F, 15H, 15P, and 15S pump models. Pump onfiguration Options Example of Product Selector Tool on Pump (1 inch ports, 5 gpm) onductive Polypropylene 15 P Polypropylene 15 F PVF 15,, or : See TEX ertifications below. enter Section and Material /Monitoring Fluid overs and Manifolds onductive 1 Standard 1 onductive, center flange Polypropylene 1 Pulse ount 2 onductive, end flange 1 atatrak 1 Remote P1 Polypropylene, center flange Polypropylene P1 Standard P2 Polypropylene, end flange P1 Pulse ount P1 atatrak F1 PVF, center flange P1 Remote F2 PVF, end flange heck Valve Seats heck Valve alls iaphragm Manifold O-Rings cetal cetal N una-n None FK FKM Fluoroelastomer N una-n O Polychloroprene Overmolded PT PTFE PP Polypropylene FK FKM Fluoroelastomer FK FKM Fluoroelastomer PV PVF PT PTFE PO PTFE/EPM Overmolded SP Santoprene SP Santoprene PT PTFE/EPM Two-Piece SS 316 Stainless Steel SS 316 Stainless Steel SP Santoprene N una-n TP TPE TP TPE L luminum GE Geolast GE Geolast GE Geolast R Polychloroprene TP TPE W Polychloroprene w/sst ore TEX ertifications ll onductive Polypropylene 15 pumps are certified: II 2 G c II T4 atatrak and Pulse ount are certified: II 2 G EEx ia II T3 Nemko 6TEX1124

2 Husky 15 Plastic Pumps Popular Models Part Number Material Standard Seats alls iaphragms Replacement Kit Seat Kit all Kit iaphragm Kit Flange Polypropylene 6491 Polypropylene Santoprene Santoprene enter 6496 Polypropylene PTFE PTFE/EPM enter Polypropylene PTFE PTFE/EPM End onductive Polypropylene cetal PTFE PTFE/EPM End SST PTFE PTFE/EPM End PVF SST PTFE PTFE/EPM End PVF PTFE PTFE/EPM End Technical Specifications Husky 15 Plastic Pumps onductive Polypropylene Polypropylene PVF Maximum fluid working pressure 125 psi (8.6 bar,.86 MPa) 125 psi (8.6 bar,.86 MPa) 125 psi (8.6 bar,.86 MPa) Maximum free flow delivery 5 gpm (189 lpm) 5 gpm (189 lpm) 5 gpm (189 lpm) Maximum pump speed 28 cpm 28 cpm 28 cpm isplacement per cycle.17 gal (.64 liters).17 gal (.64 liters).17 gal (.64 liters) Maximum suction lift 16 ft (4.9 m) dry, 29 ft (8.8 m) wet 16 ft (4.9 m) dry, 29 ft (8.8 m) wet 16 ft (4.9 m) dry, 29 ft (8.8 m) wet Maximum size pumpable solids 1/8 in (3.2 mm) 1/8 in (3.2 mm) 1/8 in (3.2 mm) Sound Power* Sound Pressure** Maximum air consumption 67 scfm 67 scfm 67 scfm ir consumption at 7 psi (4.8 bar,.48 MPa), 25 scfm 25 scfm 25 scfm gpm (76 lpm) ir pressure operating range -125 psi ( bar, -125 psi ( bar, -125 psi ( bar, ir inlet size 1/2 npt(f) 1/2 npt(f) 1/2 npt(f) Fluid inlet size 1 in raised face NSI/IN flange 1 in raised face NSI/IN flange 1 in raised face NSI/IN flange Fluid outlet size 1 in raised face NSI/IN flange 1 in raised face NSI/IN flange 1 in raised face NSI/IN flange Weight 18 lb (8.2 kg) 18 lb (8.2 kg) 26 lb (11.8 kg) Wetted parts Non-wetted Parts enter olts and material(s) chosen for seat, ball, and and material(s) chosen for seat, ball, and Instruction manual Repair/parts manual * Sound power measured per ISO ** Sound pressure was tested 3.28 ft (1 m) from equipment. PVF and material(s) chosen for seat, ball, and 21

3 1.3 in (262 mm Husky 15 Plastic Pumps Polypropylene (15P) and onductive Polypropylene (15) Performance harts imensions FLUI OUTLET PRESSURE psi (bar, MPa) 1 (8.3,.83) 1 (7,.7) 8 (5.5,.55) (4.1,.41) (2.8,.28) (1.4,.14) Husky 15 Performance 15.7 in. (399 mm) 3/4 npt(f) air exhaust port 13.2 in. (335 mm) (1.68) 5 (1.4) (1.12) 3 (.84) 1 in. NSI/IN flange IR ONSUMPTION scfm (m 3 /min) (.56) 17.8 in. 1 (452 mm) 12. in. (.28) (35 mm) enter Flange: 16. in. (6 mm) End Flange: 15.2 in. (386 mm) 8. in. (3 mm) 1/2 npt(f) air inlet gpm (lpm) 5 (19) 1 (38) (57) (76) (95) (114) (133) 2.5 in. FLUI FLOW gpm (lpm) (Pump tested in water with (63.5 inlet mm) submerged) IR PRESSURE LEGEN = at 125 psi (8.3 bar,.83 MPa) ir onsumption = at 1 psi (7 bar,.7 MPa) Fluid Pressure = at 7 psi (4.8 bar,.48 MPa) = at psi (2.8 bar,.28 MPa) 45 1 in. NSI/IN flange 3/4 npt(f) air exhaust port 1 in. NSI/IN flange enter F End Flan Mounting Pattern 5." 1.3" 5.6 in. (142 mm) 9.6 in. (244 mm) 3.9 in. (99 mm) 15.7 in. (399 mm) 13.2 in. (335 mm) 2.5 in. (63.5 mm) 17.8 in. (452 mm) 5. in. (127 mm) Typical System rawings 1.3 in. (262 mm) 1 in. NSI/IN flange Husky 15 Floor-Mount 5.6 in. (142 mm) 22

4 PRT NO. ONFIGURTION NO. SERIL NO. TE OE SERIES MX WPR PSI-bar ME IN Husky 15 Metal Pumps ir-operated ouble iaphragm Husky 15 Selector Tool To order a Husky 15, use the online selector tool at or contact your distributor. Pump I NOTE: Options for seats, check balls, diaphragms, and seals vary for the 15, 15, 15F, 15H, 15P, and 15S pump models. Example of Product Selector Tool on Pump onfiguration Options Pump (1 inch ports, 5 gpm) enter Section and Material /Monitoring Fluid overs and Manifolds luminum 1 Standard 1 luminum, standard ports, inch luminum 15 1 Pulse ount 2 luminum, standard ports, metric S 1 atatrak S1 Stainless steel, standard ports, inch 1 Remote S2 Stainless steel, standard ports, metric Stainless Steel 15 onductive 1 Standard H1 Hastelloy, standard ports, inch H Polypropylene H2 Hastelloy, standard ports, metric Polypropylene P1 Standard Hastelloy 15 P1 Pulse ount P1 atatrak P1 Remote,, or : See TEX ertifications below. heck Valve Seats heck Valve alls iaphragm Manifold O-Rings cetal cetal N una-n None L luminum N una-n O Polychloroprene Overmolded PT PTFE N una-n R Polychloroprene Standard FK FKM Fluoroelastomer FK FKM Fluoroelastomer W Polychloroprene Weighted GE Geolast GE Geolast FK FKM Fluoroelastomer PO PTFE/EPM Overmolded PP Polypropylene GE Geolast PT PTFE/EPM Two-Piece SP Santoprene PT PTFE SP Santoprene SS 316 Stainless Steel SP Santoprene TP TPE TP TPE SS 316 Stainless Steel TP TPE TEX ertifications ll luminum 15 pumps are certified: II 2 G c II T4 Stainless Steel pumps with aluminum or conductive centers are certified: II 2 G c II T4 atatrak and Pulse ount are certified: II 2 G EEx ia II T3 Nemko 6TEX

5 Husky 15 Metal Pumps Popular Models Part Number Material Standard Remote Seats alls iaphragms Replacement Kit Seat Kit all Kit iaphragm Kit luminum Polyester cetal Polyester (UL ertified) Polyester cetal Polyester cetal PTFE PTFE/EPM Geolast Geolast Geolast Santoprene Santoprene Santoprene SST PTFE PTFE/EPM Polypropylene PTFE PTFE/EPM SST 316 SST PTFE/EPM Stainless Steel SST PTFE PTFE/EPM Hastelloy 6514 FKM PTFE PTFE/EPM Typical System rawings Husky 15 Floor-Mount 24

6 Husky 15 Metal Pumps Technical Specifications FLUI OUTLET PRESSURE psi (bar, MPa) Husky 15 Metal Pumps luminum Stainless Steel Hastelloy Maximum fluid working pressure 125 psi (8.6 bar,.86 MPa) 125 psi (8.6 bar,.86 MPa) 125 psi (8.6 bar,.86 MPa) Maximum free flow delivery 5 gpm (189 lpm) 5 gpm (189 lpm) 5 gpm (189 lpm) Maximum pump speed 28 cpm 28 cpm 28 cpm isplacement per cycle.17 gal (.64 liters).17 gal (.64 liters).17 gal (.64 liters) Maximum suction lift 16 ft (4.9 m) dry, 29 ft (8.8 m) wet 16 ft (4.9 m) dry, 29 ft (8.8 m) wet 16 ft (4.9 m) dry, 29 ft (8.8 m) wet Maximum size pumpable solids 1/8 in (3.2 mm) 1/8 in (3.2 mm) 1/8 in (3.2 mm) Sound Power* Sound Pressure** Maximum air consumption 67 scfm 67 scfm 67 scfm ir consumption at 7 psi (4.8 bar, 25 scfm 25 scfm 25 scfm.48 MPa), gpm (76 lpm) ir pressure operating range -125 psi ( bar, -125 psi ( bar, -125 psi ( bar, ir inlet size 1/2 npt(f) 1/2 npt(f) 1/2 npt(f) Fluid inlet size 1 in npt(f) or 1 in bspt 1 in npt(f) or 1 in bspt 1 in npt(f) or 1 in bspt Fluid outlet size 1 in npt(f) or 1 in bspt 1 in npt(f) or 1 in bspt 1 in npt(f) or 1 in bspt Weight 23 lb (1.5 kg) with conductive 41 lb (18.6 kg) center 36.3 lb (16.5 kg) with center 37.3 lb (16.9 kg) with aluminum center 41.4 lb (18.8 kg) Wetted parts Non-wetted Parts enter olts aluminum and material(s) chosen for seat, ball, and and material(s) chosen for seat, ball, and aluminum coated carbon steel aluminum Instruction manual Repair/parts manual * Sound power measured per ISO ** Sound pressure was tested 3.28 ft (1 m) from equipment. Performance harts 1 (8.3,.83) 1 (7,.7) 8 (5.5,.55) (4.1,.41) (2.8,.28) (1.4,.14) gpm (lpm) 5 (19) 1 (38) Husky 15 Performance 15 (57) (76) 25 (95) 3 (114) FLUI FLOW gpm (lpm) (Pump tested in water with inlet submerged) 35 (133) 45 (1.68) 5 (1.4) (1.12) 3 (.84) (.56) 1 (.28) IR ONSUMPTION scfm (m 3 /min) hastelloy, and material(s) chosen for seat, ball, and IR PRESSURE LEGEN = at 125 psi (8.3 bar,.83 MPa) ir onsumption = at 1 psi (7 bar,.7 MPa) Fluid Pressure = at 7 psi (4.8 bar,.48 MPa) = at psi (2.8 bar,.28 MPa) 25

7 Husky 15 Metal Pumps imensions luminum 1 in. npt(f) or 1 in. bspt fluid outlet ports (4) 3/4 npt(f) air exhaust port 7.3 in. (185 mm) 14.7 in. (373 mm) 14.4 in in. (366 mm) (323 mm) 1/2 npt(f) air inlet 15.9 in. (4 mm) 1.9 in. (277 mm) 1.8 in. (46 mm) Mounting Pattern 5.5" 1 in. npt(f) or 1 in. bspt fluid inlet ports (4) 5." Stainless Steel and Hastelloy 3/4 npt(f) air exhaust port 1 in. npt(f) or 1 in. bspt fluid outlet ports (4) 13.9 in. (353 mm) 12.9 in. (328 mm) 11.8 in. (3 mm) 13.7 in. (348 mm) 9.5 in. (241 mm) 1/2 npt(f) air inlet 1.1 in. (28 mm) 1 in. npt(f) or 1 in. bspt fluid inlet ports (4) Mounting Pattern 5.5" 5." 5.7 in. (145 mm) 9.6 in. (245 mm) in. (12 mm)