BC SERIES CHECK VALVE
|
|
|
- Elwin Harmon
- 6 years ago
- Views:
Transcription
1
2 SERIES HEK VLVE Soft ubble Tight 1/2 psi racking Pressure NR Standard (Viton Optional, use Suffix V) Lead Free option, use suffix LF omplies with alifornia 1953 Max Working Pressure 1/4 thru 400 psi WOG Max Working Pressure 2-1/ thru psi WOG NSI/NSF 61 ertified (NR only) NR Temperature Range +10 F to 210 F Viton Max Temperature 366 F/125 psi Steam PRT # SIZE v Max psi /4 3/8 1/ psi / psi ill of s End onnection rass W 617 UNI EN Polyethermide NR (Viton Optional) NSI/NSF 61 Only for NR V18 End onnection
3 SI SERIES HEK VLVE 316 F8M Soft ubble Tight 1/2 psi racking Pressure Max Working Pressure 800 psi WOG 125 WSP Saturated Steam P.T.F.E., Temperature Range +10 F to 450 F PRT # SIZE v SI-2 1/ SI-3 3/ SI-4 SI-6 1/ SI SI SI SI ill of s End ap enter Guide End ap STM 351-F8M 316 enter Guide Gasket PTFE Gasket V19
4 S SERIES HEK VLVE 316 F8M 400 psi WOG, 125 psi WSP RTFE all one heck Valve 1/2 psi racking Pressure Temperature Range -20 F to 350 F PRT # SIZE GPM S-2 1/ S-3 3/ S-4 S-6 1/ S S S-12 S ill of s Retainer ( to ) STM 351 F8M all heck Suffix for Options Suffix Option FV Foot Valve Screen Guide OXY Oxygen lean Retainer (1/4 to ) STM SPT SPP *V SPT Threads SPP Threads Viton all heck RPTFE (Reinforced Teflon ) Guide Retainer * Note: For Suffix V onsult Factory V20
5 MF SERIES HEK VLVE STM 16 rass onstruction Precision ustom racking Pressure Settings ( psi) Viton Seal Standard, Other Elastomers vailable, onsult Factory 200 psi Max Working Pressure racks +/- 5% of Set Pressure Working Temperature 0 F to 350 F Hex D PRT # & D v MF2-* / MF3-* MF4-* MF6-* MF8-* /8 1/ * = Set Pressure (example: for a 15.5 psi cracking pressure, part# MF2-15.5) ill of s STM Optional Stem STM 16 O-Ring Viton Retainer STM 16 Special Options: SE SPT SPP Oxygen lean (consult factory) O-Ring Stem Retainer V21
6 SMF SERIES HEK VLVE 316 onstruction Precision ustom racking Pressure Settings ( psi) Viton Seal Standard, Other Elastomers vailable, onsult Factory 200 psi Max Working Pressure racks +/- 5% of Set Pressure Working Temperature 0 F to 350 F Hex D PRT # & D v SMF2-* / SMF3-* SMF4-* SMF6-* SMF8-* /8 1/ * = Set Pressure (example: for a 15.5 psi cracking pressure, part# SMF2-15.5) ill of s Stainless (316 Optional) Stem 316 O-Ring Viton Retainer 316 Special Options: SE SPT SPP Oxygen lean Hastelloy (consult factory) O-Ring Stem V22 Retainer
7 SSW SERIES HEK VLVE STM 351 F8M Metal Design Investment asting 200 psi Max Working Pressure Working Temperature -4 F to 392 F Sizes vailable From 1/ to 3 PRT # SSW-4 SSW-6 SSW-8 SSW-10 SSW-12 SSW-16 SSW-20 SSW-24 SIZE 1/ ill of s ap Gasket ap Gasket Pin STM 351-F8M () PTFE ISI 304 Stainless Pin V23
8 SW SERIES HEK VLVE ll rass onstruction Metal Design 200 psi Max Working Pressure Working Temperature -20 F to 248 F Sizes vailable From 1/ to 3 PRT # SW-4 SW-6 SW-8 SW-10 SW-12 SW-16 SW-20 SW-24 SIZE 1/ ill of s ap Gasket ap Pin Gasket ast ronze PTFE Pin V24
9 ST SERIES HEK VLVE STM 316L onstruction Max Working Pressure 150 psi Max Working Temperature 250 F Sanitary Tri-lamp Design (Weld in onnection lso vailable. onsult Factory) Viton Seal Standard (EPDM available) Suitable for Food, Pharmaceutical, Dairy and Other Sanitary pplications Sizes vailable From 1/ to 6 PRT # O/ O/ O/ D E E D O/ O/ O/ ST-4 ST-6 ST-8 ST-12 ST-16 ST-20 ST-24 ST ill of s Stem & Wing Nut lamp Stem Guide STM 316L Wing Nut Seal Ring Internal O-Ring 316 UN Internal O-Ring Stem & lamp Seal Ring Viton V25
10 H SERIES HEK VLVE Zinc lear Plated Steel heck Valve RoHs ompliant Sizes From 1/4 to with 5 or 65 psi racking Pressure vailable in or SE onnections Metal to Metal, ase Hardened Poppet and Guide Temperature -40 F to 500 F PRT # /SE Psi v H-2-** H-S4-** H-3-** H-S6-** H-4-** H-S8-** H-6-** H-S12-** H-8-** H-S16-** H-10-** H-S20-** H-12-** H-S24-** H-16-** 1/4 7/16-20 OR 3/8 9/16-18 OR 1/ 3/4-16 OR 1 1/16-12 OR 1 5/16-12 OR 1 5/8-12 OR 1 7/8-12 OR Note: ** = racking Pressure (5 = 5 Psi, 65 = 65 Psi) Retainer ill of s Entire onstruction Zinc Plated Steel RoHs ompliant V26
11 HS SERIES HEK VLVE Zinc Plated Steel heck Valve Sizes From 1/4 to with 7 or 70 psi racking Pressure vailable in or SE onnections una-n aptive Poppet O-Rings Temperature -13 F to 185 F PRT # /SE Psi v HS-2-** HS-S4-** HS-3-** HS-S6-** HS-4-** HS-S8-** HS-6-** HS-S12-** HS-8-** HS-S16-** HS-10-** HS-S20-** HS-12-** HS-S24-** HS-16-** 1/4 7/16-20 OR 3/8 9/16-18 OR 1/ 3/4-16 OR 1 1/16-12 OR 1 5/16-12 OR 1 5/8-12 OR 1 7/8-12 OR Note: ** = racking Pressure (7 = 7 Psi, 70 = 70 Psi) Retainer ill of s Zinc Plated Retainer Steel una-n V27
12 SHS SERIES HEK VLVE 316 heck Valve 7 psi racking Pressure vailable in or SE onnections Viton Poppet O-Rings Temperature -13 F to 392 F PRT # SHS-2-7 1/ Psi 5145 v 6 SHS-3-7 3/ SHS-4-7 1/ SHS SHS SHS SHS SHS Retainer ill of s 316 Retainer 302 Viton V28
13 S SERIES HEK VLVE Soft ubble Tight 1/2 psi racking Pressure NR Max Working Pressure 400 psi WOG Working Temperature 10 F to 210 F Foot Valve Screen vailable PRT # H I* Psi v Lbs S-4 S-6 S-8 S-10 S-12 S-16 1/ * = for I see drawing below H ill of s rass W 617N UNI EN End onnection rass W 617N UNI EN Polyetherimide NR End onnection I* V29
14 P SERIES HEK VLVE ronze Piston heck Valve 3 psi racking Pressure 15% Glass Filled Teflon Poppet 250 psi Max Working Pressure 450 F Max Temperature D PRT # D SFM@ 100psig v 1/8 Port P-1 P-2 P-3 P-4 P-6 P-8 P-10 P-12 P-16 1/8 1/4 3/8 1/ ap ill of s Poppet ap O-Ring ronze 15%-Glass Filled Teflon 360 Machined rass Viton O-Ring Poppet V30
15 SFW SERIES HEK VLVE ll 316 onstruction, Other lloys vailable. onsult Factory Wafer Style heck fits NSI class 125FF, 250RF, 150RF and 300RF Metal to Metal s are Precision Lapped, Resilient s vailable. onsult Factory 1/4 psi racking Pressure, Designed to Work in any Position Guided by 4 Ribs for Smooth Operation Without inding Standard Working Temperature -40 to 450 F, Wider Temp. Range vailable. onsult Factory SFW-4 SFW-6 SFW-8 SFW-10 SFW-12 SFW-16 SFW-20 SFW-24 1/ 2-1/ 3 PRT # Lbs v ill of s Yoke irclip Yoke irlip 351 GR.F8M type GR.F8M type 316 Series GR.F8M 351 GR.F8M Series 300 V31
16 Universal omponents, Inc Hall Spencer Road Rock Hill, S Phone: Fax: Psi S- Series Flow hart 1/ 1 1/ 2 1/ 4 3/8 1 1/ gal/mn HS Series Flow hart Psi /4 3/8 1/ 1 1/4 1 1/ gal/mn S Series Temp vs Pressure hart Psi F H Series Flow hart 1/4 Psi 3/8 1/ 1 1/4 1 1/ gal/mn SFW Series Temp vs Pressure hart Psi F max temp S.S. spring F SHS Series Flow hart 351 Gr. F8M NSI lass Gr. F8M NSI lass 300 Psi /4 3/8 1/ 1 1/4 1 1/ gal/mn
YSB SERIES Y - STRAINER
YS SERIES Y - STRINER ronze Y Strainer to 4 100% merican Made Self-ligning Screen Design vailable NPT or Solder onnection Working Pressure (cold non-shock) 125 psi @ 350 F Steam 400 psi @ 150 F WOG RN
B1F. B Series Forged Brass Ball Valves 5.1
** Suitable for use with natural gas, manufactured gas and liquefied petroleum gases (distributed as vapour with or without the admixture of air), or mixtures thereof. Not for use on Sour Gas. Series Forged
Product Guide MAS CA 08/05
Product Guide MS 8/5 www.mastewart.com ontents series ball valves -1: full/large port, 2 piece, NPT 1.1-2: full port, 2 piece, solder end 1.1-3: full port, 2 piece, NPT 1.2-4: full port, 2 piece, solder
ISO 9001 : Full Port Check Valves. Male NPT, Plain & Grooved End Lowest Pressure Drop. Maximizing the Flow
ISO 9001 : 2008 Full Port heck Valves Male NPT, Plain & Grooved End Lowest Pressure Drop Maximizing the Flow Full Port Lowest Pressure Drop Quick Delivery Full Port, Lowest Pressure Drop Full Port heck
197C. Valve Group. Series Farris Engineering Pressure Relief Valves
97 Valve Group Series 700 Farris Engineering Pressure Relief Valves Numbering System Selecting and specifying Farris pressure relief valves is simple using the numbering system that follows. Each digit
MALE X FEMALE LARGE-PORT BALL VALVE T-900 M x F and T-900 M x F-T
MLE X FEMLE LRGE-PORT LL VLVE T-900 M x F and T-900 M x F-T urable forged brass construction Space-saving male-by-female end connections are ideal for confined piping installations T-handle equipped models
G Series Investment Cast Stainless Steel Ball Valves
G Series Investment ast Stainless Steel all Valves G1 E Reduced port NPT ends to NSI 1.2.1 One piece body lowout-proof stem (Ring lock with 1 /4" to 3 /8", Latch lock with 1 /2" to 2") omplies with NE
Mark 95 Series. Sanitary Valves Mark 95 Sanitary Back Pressure Regulators. Sanitary Back Pressure Regulators. Features
Mark 95 Series Sanitary ack Pressure Regulators The Mark 95 is available with a hard or soft seat and a variety of diaphragm and o-ring materials, making the valve well-suited for virtually any sterile
Model 912. Model 913: Full nozzle design. Bronze/brass body and bonnet. 316 SS trim (base, disc and disc holder).
Models, 3, and SME Section VIII, ir/steam/gas/liquid, UV National oard ertified. lso available for Vacuum Service. PED ertified for Non-Hazardous Gas. pplications ir/gas compressors - intercoolers - aftercoolers.
D I S T R I B U T E D V A L V E S. NAVCO Series E Resilient Seat Butterfly Valve NAVCO
NVCO Series E Resilient Seat utterfly Valve NVCO SERIES E RESILIENT SET UTTERFLY VLVE Features vailable in sizes 2 in. - 24 in. (50 mm - 600 mm) 200 psi 2 in. - 12 in. (50 mm - 300 mm) 150 psi 14 in. -
Butterfly Valve - Series 200
utterfly Valve - Series 200 utterfly Valve design is the most common type of rotary valve and provides low weight to v Ratio combined with simplicity of design and comparatively low cost. It is a simple
Order code information
3 Piece Threaded High Pressure Fire-Safe all Valves Order code information 1.1 3 piece threaded fire-safe ball valves ody Rating Shell Material Valve ore nd onnection Trim Material Firesafe Seat & Seal
IFC Series DR Retainerless Dual Disc Check Valves
IF Series DR Retainerless Dual Disc heck Valves 6 1 2 3 4 9 7 8 5 10 Design Features Retainerless design meets industry fugitive emissions control requirements. This design eliminates the potential leak
Modulating Water Valves and Bulb Wells
Modulating Water Valves and ulb Wells PPLITION: These modulating valves regulate the flow of water to the heat exchanger to maintain a desired exiting oil temperature. They open automatically when temperature
3 Piece Full Port Ball Valves, 1 /4-12 Wide Selection of End Connections
Bray High Performance ompany Subsidiary of BRY INTERNTIONL, Inc. 3 Piece Full Port Ball Valves, 1 /4-1 Wide Selection of End onnections Series 7000 & Series 8000 Model 7000-31SS Model 8000-WB Flow-Tek
FLOATING BALL VALVE CATALOG
FLOTING LL VLVE TLOG www.walworthvalves.com INEX INTROUTION WLWORTH ENGINEERING ONTROL... 5 WLWORTH QULITY SYSTEM... 5 QULITY ONTROL EQUIPMENT... 9 FLOTING LL VLVES INTROUTION OF FLOTING LL VLVES...11
Sanitary Seals. Dimensional Drawing for VCS Sanitary In-Line Diaphragm Seal Process wetted surface finish max. Ra of 32 µ in. 1.
Sanitary Seals TRI-LMP IN-LINE (VS) SEL Dimensional Drawing for VS Sanitary In-Line Diaphragm Seal Process wetted surface finish max. Ra of 32 µ in. 1.5 (38,1) O dod L 3.54 (90,0) Dimensions are in inches
TY-FLO 3 Piece Ball Valves
TY-FLO 3 Piece Ball Valves 3 PIECE BALL VALVES TY-FLO 3 Piece Ball Valves D 1 ASME B16.34 Compliant FeaTUreS 3-Piece, 8-Bolt construction provides superior high pressure performance and ASME B16.34 compliance
ISO Wafer Check Valves. Full Port Lowest Pressure Drop. Maximizing the Flow
ISO 9001-2008 Wafer Check Valves Full Port Lowest Pressure Drop Maximizing the Flow Full Port Lowest Pressure Drop Quick Delivery Full Port, Lowest Pressure Drop Full Port Wafer Check Valves provide more
VB-7000 Series 1/2 to 2 Globe Valves
V-7000 Series 1/2 to 2 Globe Valves with MG350V Series SmartX ctuators schneider-electric.com 1 Product Description Schneider Electric MG350V non-spring actuators and V-7000 series two and three-way globe
Bronze Gate Valves. SECTION 2a. Tel: +44 (0) Fax: +44 (0)
SETION 2a ronze Gate Valves Tel: +44 (0)1695 712800 Fax: +44 (0)1695 712820 Email: sales@hattersley.com export@hattersley.com www.hattersley.com ontents ronze Gate Valves ontents Page Figure Number Index
See our expanding selection of products on Product Portfolio
See our expanding selection of products on www.fnw.com Product Portfolio Table of Contents Low Lead Products- Page 3 Ball Valves, Check Valves, Strainers, Water Hammer Arrestors Ball Valves, Brass - Page
See our expanding selection of products on Product Portfolio
See our expanding selection of products on www.fnw.com Product Portfolio Table of Contents Low Lead Products- Page 3 Ball Valves, Check Valves, Strainers, Water Hammer Arrestors Ball Valves, Brass - Page
Cipriani Harrison Valves Corp.
pplication Sanitary ball valves are used in stainless steel piping systems for isolation, either manually or automatically operated. The full port design with zero flow restriction makes it an optimum
GATE VALVES ALV-1 FORGED STEEL NOMINAL PRESSURE NOMINAL SIZE MATERIALS CONNECTIONS. ANSI Class PN /4-2 DN 8-50.
FORGED STEEL GTE VLVES LV-1 NOMINL PRESSURE NSI Class 150-1500 PN 16-250 NOMINL 1/4-2 DN 8-50 MTERILS Carbon Steel Low lloy Steel Stainless Steel CONNECTIONS Socket Weld Butt Weld Threaded Flanged XELVLVES
CSSDR-1. C Series Carbon Steel Bar Stock Ball Valves 4.1
Series arbon Steel ar Stock all Valves Lockout hole diameter is 8mm SSR-1 Reduced port NPT ends to NS 1.2.1 One piece body lowout-proof stem 2 p.s.i., W.O.G. omplies with N MR-13 N MR-175/SO 15156 4.1
FEATURES. 3 position models can be equipped with special 180 operators offering two 90 steps.
2" 8" (DN 50 200) OTTOM PORTED 3-WY FLNGED LL VLVES Jamesbury bottom ported 3-way ball valves provide a variety of flow paths not commonly found in other 3-way designs.the basic design is suitable for
Manufacturing Standards
HEK VLVE heck Valve pplication Swg check valves are designed to close quickly and automatically with positive shut off either horizontal or vertical (flow up) pipe runs. Inherently, swg check valves have
ESV - EGMO Sampling Valves
Hygienic Flow Equipment ESV - EGMO Sampling Valves Hygienic sampling valves for pharmaceutical & sanitary applications The EGMO Sampling Valves are uniquely designed for process quality control, which
SV321 & SV Way Normally Closed and Normally Open Pilot Operated Solenoid Valves
SV321 & SV421 2-Way and Pilot Operated Solenoid Valves Valcor General Purpose Series ESRIPTION pplication Features These 2-way piloted diaphragm solenoid valves are available in normally closed and normally
Bushing Viton O-ring (Other material available) Anti-Static Device
Triac 88 Series 3 -Piece Ball Valves feature a direct mount automation pad. The high quality investment castings feature a fully machined bore. The superior live-loaded packing system is accomplished with
Bronze Valves. Gate Valves Globe Valves Check Valves
ronze Valves Gate Valves Globe Valves heck Valves ronze Valves Index ross Reference... 2 General Data... 3 Materials... 4 Ratings... 5 Pressure/Temperature Ratings and Flow Data... 6 ronze Valve Selection
BULLETIN SEPTEMBER 2009 BOS OFFSET DISC RESILIENT- SEATED BUTTERFLY VALVES TECHNICAL SPECIFICATIONS
ULLETIN 46.00-2 SEPTEMER 2009 OS OFFSET IS RESILIENT- SETE UTTERFLY VLVES TEHNIL SPEIFITIONS Materials of onstruction 2 s (50-) 8 9 7 Wafer and Lugged esign 10 3 Wafer ody Lugged ody 6 5 4 1 2 2 s (50-)
SV73 Cast Iron Safety Valve
Page 1 of 5 TI-S13-25 H Issue 11 ert. No. LRQ 0963008 ISO 9001 SV73 ast Iron Safety Valve Description The SV73 cast iron series valves are built in conformance to Section I and VIII of the SME oiler and
CONN in mm in mm in mm SIZE lbs kg PX " /4"
ccessories 1 PV MNUL IR VENT PRESSURE / TEMPERTURE ombination Manual ir Vent and Pressure/Temperature Test Port with brass body, dual durometer EPDM core, blowout-proof stem, side discharge vent with 1/8
Butterfly Valves. Quality Valves at Low Cost
utterfly Valves Quality Valves at ow Cost bout Us The Flow+ product le is built around the goal of providg quality valves at competitive prices. It s a goal that has met the needs of various oil and gas,
Air Actuated Ball Valves 3-Piece Stainless Steel, Full Port 1/4 to 3 NPT
ir ctuated all Valves 3-Piece Stainless Steel, ull Port 1/4 to 3 SERIES eatures Spring Return or ouble cting ctuators ull Port direct mount ISO5211 valve Swing-out bolted body design for easy maintenance
W94. Specifications. Protection: Models Temperature Range Capillary Length Sensing Bulb Valve Body Selection
Temperature Model W91 (No Indicating Dial) W94 (Temperature Indicating Dial) Service Water, Steam, Other Liquids Sizes 1/2 4 onnections Threaded, Union Ends, 125# FLG 250# FLG (optional) ody Material 1/2
MILLCENTRIC B ALANCING PLUG VALVE
ISO 9001 ertified MILLNTI LNING PLUG VLV alancing Service egulation of multi-circuit chilled water and hot water systems is essential to achieve design performance. MILLNTI valves have excellent throttling
HD(U) Series Valves HVAC Service Butterfly Valves 2-way and 3-way Assemblies
Features / enefits utterfly Valves H(U) Series Valves HV Service utterfly Valves 2-way and 3-way ssemblies elimo resilient seat H(U)... Series utterfly Valves are designed for use in NSI lass 150 piping
BACKFLOW PREVENTERS DUAL-CHECK BACKFLOW PREVENTER WITH ATMOSPHERIC VENT T/S-459 Certified to ASSE Standard 1012
CKFLOW PREVENTERS DUL-CHECK CKFLOW PREVENTER WITH TMOSPHERIC VENT T/S-459 Certified to SSE Standard 1012 Certified to CS Standard 64.3 Forged brass construction Threaded or sweat true union end connections
,, WY VLVS Way Valves - Side ntry Product index... p. - Way Valves - ottom ntry Product index... p. Way Valves - ottom ntry Product index...p. ontents
MTRI,, WY VLVS 6P/6P SRIS ,, WY VLVS Way Valves - Side ntry Product index... p. - Way Valves - ottom ntry Product index... p. Way Valves - ottom ntry Product index...p. ontents Introduction... Page - Product
TY-FLO 3 Piece Ball Valves
OTHER PRODUCTS Other Products TYLOK International carries a comprehensive range of high-quality fluid components to compliment the TY-FLO 3 Piece Ball Valve product line. Featured below are several popular
JSRLF Series. Sanitary Valves JSRLF Series Low Flow Gas Reducing Valves
JSRLF Series Low Flow Pressure Reducing Valves for Bio, Pharma and High Purity Gas pplication The Steriflow JSRLF Series line of low flow pressure regulators have the ability to handle very high pressures
FORGING AHEAD OF THE REST
Bonney orge The Name You Trust for orged Steel Valves Bonney orge's forged steel valves and piping components have led the way for over eighty years in state-ofthe-art design and dependable performance.
GLV SERIES PRESSURE RELIEF VALVES
GLV SERIES PRESSURE RELIEF VLVES GLV SERIES TLE OF ONTENTS Relief Valves GLV-Series are spring loaded pressure relieving devices, suitable for discharge of incompressible fluids. GLV-series relief valves
Item 305D-CRYOGENIC 3-PC Cryogenic Ball Valve
Item 5D-RYOGENI 3-P ryogenic Ball Valve LASS 600/ 00/ 260WOG/ PN 0 SIZE: /2"-" SPEIFIATION * MSS SP-, 2006 cryogenic standard * Suitable for -6 working condition * Body & end caps quality investment casting
quick couplings HQC Series Instrumentation Quick Couplings Typical Applications Features & Benefits Technical Data
HQ Series Instrumentation Quick ouplings Typical pplications Laboratories University labs Gas distribution iopharmaceutical Technical Data ONSTRUTION 36 Stainless steel* NOMINL FLOW SIZES /4, 3/8, / MXIMUM
High Performance Butterfly Valves 2 Way Way 2-20 Bray MK Series High Performance Butterfly Valves ANSI Class 150 and 300
ray MK Series High Performance utterfly Valves NSI lass 10 and 00 High Performance utterfly Valves 2 Way 2 20 Way 2 20 /2/1 The ray Mcannalok MK Series high performance butterfly valves set the quality
check valves BIVCO Check Valves
BIVCO valves are considered all-purpose valves because they can be tailored in the right combination of materials for the job at hand for liquids, including acids, alkalais, formaldehyde, solvents, oils,
D I V I S I O N O F M A R S H B E L L O F R A M
PH Regulator Large Capacity Working Media Include ir, Steam and Liquids ll Vents are Tapped The PH is a direct operating pressure reducing regulator with large capacity. Ideally suited for uses in oil
2010B. Available Materials Aluminum Carbon Steel Stainless Steel Ductile Iron Special Materials on Application
OVER EQUIPMENT VRE 0 / 00 Series PRESSURE N VUUM RELIEF VLVE The 0/00 protects tanks from damage or deformation, and minimizes emissions to the environment, as well as loss of product due to evaporation.
fluid control Fluid Control Components Index
Fluid ontrol omponents Index VH Series 1 heck valves XVH Series 5 Excess flow valves 6100/6200 Series 13 heck valves 691F Series 16 heck valves R6000 Series 18 djustable relief valves 6600 Series 24 leed
TECHNICAL DATASHEET DUO-CHEK High Performance Non-Slam Check Valves
brands you trust. TEHNIL DTSHEET DUO-HEK High Performance Non-Slam heck Valves Retainerless heck Valves Style H High Performance heck Valve for ritical pplications For critical applications, Duo-hek Retainerless
9800 Series. Metal to Metal Trunnion Ball Valves STANDARDS FEATURES & BENEFITS APPLICATIONS & INDUSTRIES
STNRS PI 6 certified SM / NSI 16.10 PI 6F, PI 607, 4th dition Wall thickness complies to 16.34 esigned to SM / NSI 16.5, 16.10, 16.34, 31.1, 31.4 and 41.8 standards N MR 0175 compliance 9800 Series Metal
Needle Valves. Needle Valves Part Matrix. Flow Coefficient (C v ) belgas.net 1
Needle Valves elgs Standard Needle Valves offer four choices in 316 stainless steel as well as one piece forged carbon plated steel; soft seat and hard seat, angle and globe styles. The Mini Valve offers
Size: 1/4 to 3. Material: 316 Stainless Steel, Carbon Steel,
Size: 1/4 to 4 Material: 316 Stainless Steel, Carbon Steel, Alloy 20, Hastelloy C, Monel, Brass, SW, BW, BSPT, 150#, 300#, 600#, Flanged Pressure: Vacuum to 3000 PSI* -50 to 600 F* ASME B16.34 Design Bottom
WKM Valves Triple Offset Valves
WKM Valves Triple Offset Valves High-quality, bidirectional valves for critical applications in demanding markets ontents Triple offset geometry.......................................... 3 Major markets...................................................
966SRL 966SBL Nominal size A B C D Weight Red Lever Blue Lever in mm mm mm mm kg Product Code Product Code
D rass Full ore FIG 966SRL and 966SL WRS Valves Lockable lever as standard 966SRL 966SL Nominal size D Weight Red lue in mm mm mm mm kg Product ode Product ode 4 4.4 44.7 90 8 0.7 784204 78408 8 45.4 47.8
GTW 3-WAY CONTROL VALVE SIZES 1/2" 12" ANSI CLASS 125/250, 150/300
GTW ONTROL VLVE PPLITION DT Process control systems for food, pulp and paper, chemical, petrochemical & other industries HV systems Feed water and fuel system controls in boiler rooms Packaged systems
BY DESIGN. DIFFERENT. BY INTENT.
Tech Bulletin Page 51-10 FLO 3pc High Performance Fire Safe Ball Valve Tri-Pro Series Models HPF50 - (316SS) HPF40 - (WB) Full Port: 1/4-3 Pressure Rating 2250 WOG / 250 WSP Models HPS50 - (316SS) HPS40
Tri-Pro Series. Models / Full HPF50 - (316SS) HPF40 - (WCB) Size: 1/4-4 Pressure Rating: 3000 WOG 1/4-3/ WOG 1-4
FLO TITEE valves & controls Tri-Pro Series Models / Full HPF50 - (316SS) HPF40 - (WCB) Size: 1/4-4 Pressure Rating: 3000 WOG 1/4-3/4 2250 WOG 1-4 TM Page 1 3pc High Performance Fire Safe Valves Models
brands you trust. ALOYCO Corrosion Resistant Stainless Steel Valves Crane ChemPharma & Energy
brands you trust. LOYCO Corrosion Resistant Stainless Steel Valves Crane ChemPharma & Energy Key Features and pplications Key Features and enefits Full material offering including CF8M, CF3M, and CN7M
USA, INC. At the date of 30/04/2009: Lead free law passed. Law suggested
US, IC. US, IC. t the date of 30/04/2009: ead free law passed aw suggested CCORDIG CIFORI HET SFETY CODE 116875 VIE FROM SEPTEMER 2009 SERIES 171 F COMMERCI STYE rass ball valve, female/female, full port
BOSHART INDUSTRIES BRASS GATE VALVE WITH DRAIN
BOSHART INDUSTRIES 2-2 SERIES 0813 BRASS GATE VALVE WITH DRAIN 0 PSI W.O.G. (Cold water, oil, gas) Black cast hand wheel Non-rising stem - solid wedge disc Threaded & CxC 0813-05 0813-07 0813-0.508 0.760
Series. Stainless Steel Ball Valve 1/4-1
76-100 Series Stainless Steel Ball Valve 1/4-1 Threaded, 2000 psig WOG. (See referenced P/T chart) Cold Non-Shock. 150 psig Saturated Steam, Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35C,
P95H Regulator Applications P95H Part Matrix Specifi cations Materials of Construction P95H Flow Coeffi cients Wide Open Coeffi cients
PH Regulator Large Capacity Working Media Include ir, Steam and Liquids ll Vents are Tapped The PH is a direct operating pressure reducing regulator with large capacity. Ideally suited for uses in oil
Flow Controls & Accessories
Flow ontrols & ccessories Section V V Flow ontrol Valves SPF Series...2 337 Series...3 3250 Series... 4-5 Miniature Right ngle...6 3251 Series...7 FM701 & FM703 Series...8 F701, F702, FS701 Series...9
Series TSB7 Ball Valve
Series TS7 all Valve leanflow TM TS7 all Valves are engineered to be a true process piping component to specifically meet the demanding processes found in the pharmaceutical and food & beverage industries.
Flow Controls & Accessories
Flow ontrols & ccessories Section Flow ontrol Valves SPF Series...2 337 Series...3 3250 Series... 4-5 Right ngle Series... 6-9 Needle Valves SPN Series...10 338 Series...11 SP Series heck Valve...12 339
SPIRA-TROL. ½" to 4" ASME (ANSI) Two-port KEA, KFA and KLA Control Valves
Page 1 of 11 MNGMNT SYSTMS TI-P375-1 Issue 3 SPIR-TROL ISO 91 ½" to 4" SM (NSI) Two-port K, KF and KL ontrol Valves ert. No. LRQ 9638 Description SPIR-TROL is a range of two-port single seat globe valves
TY-FLO 3 Piece Ball Valves
TY-FLO 3 Piece Ball Valves 3 PIECE BALL VALVES TY-FLO 3 Piece Ball Valves D 1 ASME B16.34 Compliant FEATURES 3-Piece, 8-Bolt construction provides superior high pressure performance and ASME B16.34 compliance
Series 581. Silent Globe Check Valve CLA-VALTM SPECIFICATIONS
L-VLTM Series Silent Globe heck Valve Operates Horizontally or Vertically Watertight Seating Field Replaceable Parts Factory Mutual pproved Various Sizes Optional Resilient Seat SPEIFITIONS ll materials
gunric product selector gunric product selector
gunric product selector gunric product selector gunric valves is a proud member of the avk group 2 GUNRIC PRODUCT SELECTOR Gunric Product selector south africa Gunric Valves is a leading manufacturer and
Mark 95 Series. Sanitary Valves Mark 95 Sanitary Back Pressure Regulators. Sanitary Back Pressure Regulators
Mark 95 Series CRN Registration Number vailable Sanitary Back Pressure Regulators The Mark 95 is available with a hard or soft seat and a variety of diaphragm and o-ring materials, making the valve well-suited
General Purpose Ball Valves CERTIFIED TO ISO 9002 QUALITY STANDARDS
General Purpose all Valves RTIFID TO ISO 92 QULITY STNDRDS VOP- ON-PI RDUD PORT GNRL PURPOS LL VLV 4 2 (8 mm) RON OR STINLSS STL ODY, RPTF STS FIGUR NUMR RON = S-L2-SSG F8M = S-L-SSG STNDRD MTRILS PRT
Air Actuated Stainless Ball Valves 2-Piece Stainless Steel, Full Port 1/4 to 2 NPT
ir ctuated Stainless all Valves 2-Piece Stainless Steel, ull Port 1/4 to 2 SRIS eatures Spring Return or ouble cting ctuators ull Port direct mount ISO5211 valve 316 stainless steel body, ball and stem
Table of Contents. Quick Coupling Products
Quick oupling Products Table of ontents Table Of ontents...1 Fluid Quick ouplings...3 oupling Selection uide...4 Non-Spill ouplings...5 FS Series...5 ouplers...6 Nipples...7 FS Series ust aps & Plugs...8
Flowline Products and Services World Proven Chiksan and Weco Equipment.
Flowline Products and Services World Proven hiksan and Weco Equipment http://www.fmctechnologies.com Original hiksan Swivel Joints Steamlined bore minimizes flow restrictions Smooth, round bore design
Fittings and Tubing. Low Pressure. Fittings and Tubing - Low Pressure. Low Pressure Fittings and Tubing Features: Pressures to 15,000 psi (1034 bar)
ittings and Tubing Low Pressure Pressures to 15,000 psi (1034 bar) Since 1945 utoclave ngineers has designed and built premium quality valves, fittings and tubing. This commitment to engineering and manufacturing
Pneumatic Fittings & Tubing
Pneumatic Fittings & Tubing General Information Fitting escriptions Working Pressure Style Maximum Nominal onstruction pplication ompatible Tubing Poly-Flo 500 PSI 125 PSI Three-piece: body, nut Pneumatic
HART Series Fabricated Strainers
Table Of ontents HART Series Fabricated Strainers Fabricated Strainers................................................2 HART Series T,T and TP Temporary Strainers.........................3 HART Series
VF-73 SERIES Centric Butterfly Valves
VF-73 SERIES entric utterfly Valves VALUE VALVES VALUE VALVES VF-7 SERIES PRODUT HARATERISTIS With 35 years of experience in the industry, extensive reference lists in all industrial sectors and continued
CLARK SOLUTIONS 8P Series Pneumatic Actuated Ball Valves 1/4 to 4 Brass & Stainless Steel, 2-way & 3-way configurations
CLARK SOLUTIONS 8P Series Pneumatic Actuated Ball Valves 1/4 to 4 Brass & Stainless Steel, 2-way & 3-way configurations www.clarksol.com SERIES 8P0O80/82/135/136 SERIES 8P0129/131(T,L) 80: Direct mount
VALVULAS. Modelo 215V, 337 Sección VIII, Vacío De Asme Aire/Gas, Válvulas De Seguridad Certificadas Tarjeta Nacional ' UV'
VLVULS Modelo 215V, 337 Sección VIII, Vacío De sme ire/gas, Válvulas De Seguridad Certificadas Tarjeta Nacional ' UV' Descripciones Modelo Model 337: Tiene dispositivo para la elevación 'tirar-anillo'
AN ISO 9001 : 2008 COMPANY GLOBE VALVES. Get the edge in process control. Butterfly Valves India Pvt. Ltd.
N ISO 9001 : 2008 OMPNY GLOE VLVES Get the edge in process control utterfly Valves India Pvt. Ltd. Introduction Hi-TEH Manufacturing Programme Valve Type End SME 2 2½ 3 4 5 6 8 10 12 onn. lass DESIGN STNDRD
DRV4 and DRV4G Cast Steel Pressure Reducing Valves
Local regulations may restrict the use of this product to below the conditions quoted. n the interests of development and improvement of the product, we reserve the right to change the specification without
Aloyco. Corrosion Resistant Valves. The First Name In Corrosion Resistant Valves
loyco Corrosion Resistant s The First Name In Corrosion Resistant s Stainless Steel s General Index Figure No. Type Pressure Class End Connection Material vailable Size Range Catalog Page 0 Gate, RS 00
Valves & Flow Control Components Valves & Flow Control Components
Section 4 Valves & Flow ontrol omponents Valves & Flow ontrol omponents... 106 SJ-200 Low-Profile utterfly Valve... 107 SJ-300N utterfly Valve... 108 SJ-300F utterfly Valve (for Fire Protection)... 110
3-Way Mixing and Sequencing Globe Valves, Flared (5/8 in. O.D.) with Electric, Hydraulic, and Pneumatic Actuators
lectric, Hydraulic, and Pneumatic ctuators TL 1. Select Valve ody including P ode (Valve Size, v Rating, Port ode) or select Valve ssemly correct (refer to Tale 3 and Tale 3 also) less ctuator ode (XXX)
Vanessa Series 30,000 Triple Offset Valves* Cryogenic Configuration
* ryogenic onfiguration virtually maintenance-free valve with tightness, operability and torque demand unaffected by cryogenic conditions and severe temperature fluctuations Features General applications
Flow Controls & Accessories
ontrols & ccessories Section Y ontrol Valves SPF Series... 2 337 Series... 3 3250 Series... 4-5 Miniature Right ngle... 6 3251 Series... 7 FM701 & FM703 Series... 8 F701, F702, FS701 Series... 9 Needle
Introduction Parker are designed for uni-directional flow control of fluids and gases in industries such as chemical processing, oil and gas productio
Check Valves (C Series) Catalog 4130-C Revised, July 2004 Introduction Parker are designed for uni-directional flow control of fluids and gases in industries such as chemical processing, oil and gas production
Process Equipment Catalog Pumping Solutions for Process Industries
Process Equipment atalog Pumping Solutions for Process Industries Table of ontents Process Equipment uyer s Guide ontents New Products... 2 Pump Model Overviews... 3 Pump Selection Key for ODD Pumps...
INDUSTRIAL VALVES BRASS BALL VALVES PLUS WIDE SOLUTIONS ACCORDINGLY TO EVERY KIND OF APPLICATION OPTIMIZED DIMENSIONS & PERFORMANCES THREAD UP TO 4
591 INDUSTRIAL VALVES BRASS BALL VALVES PLUS WIDE SOLUTIONS ACCORDINGLY TO EVERY KIND OF APPLICATION OPTIMIZED DIMENSIONS & PERFORMANCES THREAD UP TO 4 INDUSTRIAL VALVES / BRASS BALL VALVES 592 BRASS EUROPE
Your Global Source for Today s Most Popular Solenoid Valves
lcon Solenoid Valves Your Global Source for Today s Most Popular Solenoid Valves lcon Solenoid Valves Your Global Source for Today s Most Popular Solenoid Valves lcon Solenoid Valves, a division of International
BRONZE FITTINGS. Class 125 (150) For steam, water, gas, oil and air service Standard specifications PRICING FILE AVAILABLE ONLINE
NIPPLES & FITTINGS RONZE FITTINGS U L UL842, UL258, UL125, Class 125 (150) For steam, water, gas, oil and air service Standard specifications Materials - STM 62-93 (85,5,5,5) C83600 PRICING FILE VILLE
Approved. Size L H. 3" (76mm) 9-1/2" (241mm) 5-51/64" (147mm) 46. 4" (102mm) 11-1/2" (292mm) 6-45/64" (170mm) 81
pproved. Model: SD-NRV200CV Flanged Ends The Flanged End Check Valves are made of Iron Body, Bolted Bonnet and Horizontal Swing, painted with standard color. Epoxy coated inside and outside to WW C550
IDF / ISS Hygienic Union BS 4825 Part 4
IDF / ISS Hygienic Union S 4825 Part 4 This hygienic union has been widely used since its recommendation by the International Dairy Federation in 1960. This hexagonal screwed union is more commonly referred
CLARK SOLUTIONS 8E Series Electric Actuated NEMA 4X Ball Valves 1/4 to 4 Brass & Stainless Steel, 2-way & 3-way configurations
CLARK SOLUTIONS 8E Series Electric Actuated NEMA 4X Ball Valves 1/4 to 4 Brass & Stainless Steel, 2-way & 3-way configurations www.clarksol.com MODEL SERIES 8E064/68 64: Direct mount 2-way brass full port