Type II Vipros 358 King with Fanuc 18P Control
|
|
- Allen Hensley
- 5 years ago
- Views:
Transcription
1 Type II Vipros 358 King with Fanuc 18P Control Layout Drawings Amada America Inc Firestone Blvd. Buena Park CA Phone: (714) Fax.: (714) Print Date 02/16/2001 Revision 4.0 This document available on the World Wide Web at Page 1 of 10
2 Warning! Qualified personnel must complete all work.! Do not apply power to the Type II Vipros 358 King until an A.E.S.I. (Amada Engineering and Service Incorporated) Engineer is present and has instructed you to do so.! Not all information required to install the Type II Vipros 358 King is included with this document. Specific details for proper installation are found in the document Type II Vipros 358 King with Fanuc 18P User Pre-installation Guide available at the Amada America Internet web site at Considerable effort has been made to ensure that this manual is free of inaccuracies and omissions. However, as we are constantly improving our product, some of the data contained herein may be out of date. Please check our Internet site, for the latest release of this document. Print Date 02/16/2001 Revision 4.0 This document available on the World Wide Web at Page 2 of 10
3 Contents Planning the Location of the Type II Vipros 358 King...4 Plan View - Type II Vipros 358 King...5 Plan View - Type II Vipros 358 King (shown with optional standard conveyors)...6 Plan View - Type II Vipros 358 King (shown with optional standard conveyors and MP1225 Loader)...7 End View - Type II Vipros 358 King...8 Elevation View - Type II Vipros 358 King...9 Chiller Placement...10 Print Date 02/16/2001 Revision 4.0 This document available on the World Wide Web at Page 3 of 10
4 Planning the Location of the Type II Vipros 358 King The following diagrams provide the details for positioning the Type II Vipros 358 King. " No obstacles are allowed in the worksheet travel area and the ceiling must be at least 40" above the Type II Vipros 358 King. " All of the recommended maintenance areas should be used, but at a minimum the doors of the NC unit must be able to be opened. Any reduction of the listed maintenance areas may increase time and expense of installation and maintenance. " The Type II Vipros 358 King machine and control must be protected from direct sunlight or other heat sources. Direct exposure to direct heating sources such as infrared heaters have been shown to affect punch and die alignment. " The positioning of the SBC EX5.5 Chiller is very flexible. Print Date 02/16/2001 Revision 4.0 This document available on the World Wide Web at Page 4 of 10
5 Plan View - Type II Vipros 358 King Electrical Requirements E1 Vipros 358 King Type II 230 / 460 / 3 / 60 ±10% 28 kva / 3 / 60 VAC / 3 / 60 VAC E2 SBC EX5.5 Chiller 230 or 460 / 3 / 60 ±10% 15 kva / 3 / 60 VAC / 3 / 60 VAC Compressed Air Requirements A1 Vipros 358 King Type II ft³/min. 54" 37.0" Chiller 57.0" E2 40" 29.5" 25" Hydraulic 59.0" 19" Operator Control Station 339" Recommended Safety / Maintenance Area 40" from all components 98.8" " 100.0" Maximum Travel Area 50" Material 50.0" Working Range Track 200 Centerline Vipros 358 King A1 CNC E1 scale 78.74" = Working Range " = V358k Machine Width " maximum travel area " material 396.2" Recommended Safety / Maintenance Area 40" from all components Print Date 02/16/2001 Revision 4.0 This document available on the World Wide Web at Page 5 of 10
6 Plan View - Type II Vipros 358 King (shown with optional standard conveyors) Electrical Requirements E1 Vipros 358 King Type II 230 / 460 / 3 / 60 ±10% 28 kva / 3 / 60 VAC / 3 / 60 VAC E2 SBC EX5.5 Chiller 230 or 460 / 3 / 60 ±10% 15 kva / 3 / 60 VAC / 3 / 60 VAC E3 V358 Standard Conveyor / 460 / 3 / 60 ±10%.8 kva / 3/ 60 VAC / 3 / 60 VAC / 3 / 60 VAC E4 V358 Standard Conveyor / 460 / 3 / 60 ±10%.8 kva / 3/ 60 VAC / 3 / 60 VAC / 3 / 60 VAC Compressed Air Requirements A1 Vipros 358 King Type II ft³/min. Operator Control Station 336" Recomended Safety / Maintenance Area 40" from all components 98.8" 54" 50.0" Working Range 37.0" Chiller 57.0" E2 40" Hydraulic Power Track 200 Centerline Conveyor 1 E3 Conveyor " 29.5" 25" 59.0" 19" A1 CNC E4 E1 scale 78.74" = Working Range " = V358k Machine Width " maximum travel area " material 395.0" Recomended Safety / Maintenance Area 40" from all components Print Date 02/16/2001 Revision 4.0 This document available on the World Wide Web at Page 6 of 10
7 Plan View - Type II Vipros 358 King (shown with optional standard conveyors and MP1225 Loader) Electrical Requirements E1 Vipros 358 King Type II 230 / 460 / 3 / 60 ±10% 28 kva / 3 / 60 VAC / 3 / 60 VAC E2 SBC EX5.5 Chiller 230 or 460 / 3 / 60 ±10% 15 kva / 3 / 60 VAC / 3 / 60 VAC E3 V358 Standard Conveyor / 460 / 3 / 60 ±10%.8 kva / 3/ 60 VAC / 3 / 60 VAC / 3 / 60 VAC E4 V358 Standard Conveyor / 460 / 3 / 60 ±10%.8 kva / 3/ 60 VAC / 3 / 60 VAC / 3 / 60 VAC E5 MP1225 Loader 200 / 3 / 60 ±10%, 10 Kva To operate at 230 / 460 VAC a step up transformer is required with the following service is required / 3 / 60 VAC / 3 / 60 VAC / 3 / 60 VAC Compressed Air Requirements A1 Vipros 358 King Type II ft³/min. A2 MP1225 Loader ft³/min. Operator Control Station 336" Recomended Safety / Maintenance Area 40" from all components 54" 98.8" 50.0" Working Range Chiller 57.0" 40" Hydraulic Power Track 200 Centerline Conveyor 1 E3 Conveyor " 37.0" E2 29.5" 25" 59.0" 19" A2 Xformer MP1225 E " 189.6" Loader Length MP1225 Loader A1 CNC E4 forktruck access required this area for material / parts loading / unloading E " = Working Range " = V358k Machine Width 81.9" to edge of Loader " maximum travel area " material " combined machine width 141.7" Loader width scale 461" Recomended Safety / Maintenance Area 40" from all components Print Date 02/16/2001 Revision 4.0 This document available on the World Wide Web at Page 7 of 10
8 End View - Type II Vipros 358 King Scale Material Pass Line 93.30" 39.56"* 3.71" 14.76" 29.52" J-Bolt Centerline 35.43" 53.92" Weight Support Bolt 107.8" Weight Support Bolts 131.9" Shipping Width w/o Crate 78.74" X-axis zero set 162.2" Assembled Width *Material Pass Line may increase with installation of available options Print Date 02/16/2001 Revision 4.0 This document available on the World Wide Web at Page 8 of 10
9 Elevation View - Type II Vipros 358 King " 52.76" Throat Depth Turret Center 19.69" " Center of Track " Working Range Y-axis "0" 47.24" 19.69" 1.63" Material Pass Line Hydraulic Power 39.56"* 9.8" 10.3" 62.40" 23.43" 37.99" 63.77" Weight Support Centerline 37.40" " J-Bolt Centerline 26" ±10" 29.53" *Material Pass Line may increase with installation of available options Print Date 02/16/2001 Revision 4.0 This document available on the World Wide Web at Page 9 of 10
10 Chiller Placement Y-Axis 0" Material Pass Line 6" Hydraulic Power Two 15ft supplied water lines Chiller Air Flow Under normal operating conditions the Chiller may be placed against walls as shown. For maintenance purposes access to all sides may be required. 60" overhead clearence required. Chiller may be located up to 50ft from Hydraulic. Chiller is not designed for outdoor placement. 6" Print Date 02/16/2001 Revision 4.0 This document available on the World Wide Web at Page 10 of 10
Pega 345 Queen with 04PC Control Layout Drawings
Amada America Inc. 7025 Firestone Blvd. Buena Park CA. 90621 Phone: (714) 739 2111 Fax: (714) 739 4099 Email info@amada.com Print Date 03/01/2001 Revision 4.0 This document available on the World Wide
More informationLaser/ Punch Combination machines. (1) Amada Aries 245 with Amadan 04PA control. (1) Amada Pega 367 with 04PC control
KMS EQUIPMENT LIST > Page 1 0f 4 Turrets (1) Amada Aries 245 with Amadan 04PA control (1) Amada Pega 367 with 04PC control (1) Amada Vipros 357 with 04PC control and 6 shelf load / unload auto storage
More informationWELDOR CNC MACHINES. We invite your kind attention to your interest of below machines and discussion for the same.
WELDOR CNC MACHINES Mail: - weldorcncmachines@gmail.com Mobile Number: - +91 83061 84061 / +91 92277 55528 Web1:- www.weldorcncmachines.com Web2:- www.weldorpunchpress.com Address: - Survey No.240, Behind
More informationServo/Hydraulic Press Brake. HDS NT Series HDS 5020NT, HDS 8025NT, HDS 1303NT, HDS 1703NT & HDS 2204NT
Servo/Hydraulic Press Brake HDS NT Series HDS 5020NT, HDS 8025NT, HDS 1303NT, HDS 1703NT & HDS 2204NT The HDS NT Series Press Brake An ultra-high precision, down-acting system featuring advanced hydraulics
More informationServo/Hydraulic Press Brake. HD NT Series HD 8025 NT, HD 1303 NT, HD 1303L NT, HD 1703 NT, HD 1703L NT, HD 2204NT & HD 2204L NT
Servo/Hydraulic Press Brake HD NT Series HD 8025 NT, HD 1303 NT, HD 1303L NT, HD 1703 NT, HD 1703L NT, HD 2204NT & HD 2204L NT The HD NT Series Press Brake An ultra-high precision, down-acting system featuring
More informationAre you Looking to Sell or Trade Surplus Equipment?
APPRAISALS TRADE-INS FINANCING TOOLING Visit Us at www.jordancraigmachinery.com TO VIEW ALL LISTINGS Jordan Craig has specialized in CNC Press Brakes, Lasers, CNC Turret Punches, and Fabricating Equipment
More informationServo/Hydraulic Press Brake With Automatic Tool Changer HG 1003 ATC
Servo/Hydraulic Press Brake With Automatic Tool Changer HG 1003 ATC HG 1003 ATC Press Brake with Automatic Tool Changer Introduce rush jobs seamlessly Triple or quadruple the amount of setups performed
More informationServo/Hydraulic Press Brake With Patented Automatic Tool Changer HG 1003 ATC
Servo/Hydraulic Press Brake With Patented Automatic Tool Changer HG 1003 ATC HG 1003 ATC Press Brake with Patented Automatic Tool Changer Introduce rush jobs seamlessly Triple or quadruple the amount of
More informationEQUIPMENT SURPLUS TO THE OPERATIONS OF KARLEE INC. < AMADA LASMAC PULSAR LC 2415α IV NT 4000 WATT CNC LASER CUTTING MACHINE AVAIL. AVAIL.
Public Auction T A N ED L P S O CL EV MU ERY ST THI SE NG LL! EQUIPMENT SURPLUS TO THE OPERATIONS OF KARLEE INC. LATE MODEL WELL MAINTAINED AMADA FACILITY 4101 E. MILITARY HWY - MISSION, TX 7857 THURSDAY,
More informationBULL POWER Line Conditioner Regulating Power Bar
BULL POWER Line Conditioner Regulating Power Bar Auto Voltage Regulation User s Manual TABLE OF CONTENTS INTRODUCTION 1 1. IMPORTANT SAFETY INSTRUCTIONS 2 2. PRESENTATION 2 3. INSTALLATION 3 4. OPERATION
More informationServo/Hydraulic Press Brake With Automatic Tool Changer HD 1003 ATC
Servo/Hydraulic Press Brake With Automatic Tool Changer HD 1003 ATC The HD NT Press Brake An ultra-high precision, down-acting system featuring advanced hydraulics that provide the ultimate in positioning
More informationAMADA EMZ 3510 NT. KISTNER GmbH & Co. KG. Industriestraße 7-9 D Thurnau Tel. (+49)
AMADA EMZ 3510 NT KISTNER GmbH & Co. KG Industriestraße 7-9 D-95349 Thurnau Tel. (+49) 98 987-0 info@maschinen-kistner.de www.maschinen-kistner.de LIST OF CONTENTS Machine info........... Technical data........
More informationSERIES DL SERIES. High Performance Double Column Machining Center YIH CHUAN MACHINERY INDUSTRY CO., LTD. Double Column Milling
DL SERIES Double Column Milling EXCELLENT TRUSTWORTHY ON AND ON YIH CHUAN MACHINERY INDUSTRY CO., LTD 40755 8, 9 th Rd., Taichung Industrial Park, Taichung, Taiwan TEL : +886-4-2359-3351 FAX : +886-4-2359-0012
More informationDate: Technical Overview of Power Requirements for Hot Runner Control Systems
Date: 11-06-2008 Ref: By: Technical Overview of Power Requirements for Hot Runner Control Systems Fred Schroeder, Sr. Product Engineer Electronics, DME Company Introduction: Many customers ask often, I
More informationACE Group. Automotive Wheel Manufacturer & Powder Coating
Automotive Wheel Manufacturer & Powder Coating ROBOTS (2) Motoman Mod. SK120 Robotic Wheel Loader for Machine Cells, Wheel Grippers up to 22 Wheels, Yasnac MRC Controllers. 4th AXIS TWIN TURRET CNC WHEEL
More informationC N C. S y n c h r o. H y d r a u l i c
C N C S y n c h r o H y d r a u l i c P r e s s B r a k e E n g i n e e r e d t o p e r f e c t i o n... CNC Press Brake CNC Controller 5 CNC Controller 7" Full Colour TFT Touch Screen Display - Selection
More informationElectric Specifications Input Power Source 230 VAC +/- 10% 3Ph 60Hz Std. Power. Machine kva 88 Supply
750 S P E C I F I C A T I O N S 72/96/130-70mm English Metric Injection Unit Specifications A B C A B C Injection Capacity, Max. GPPS oz 72 96 130 gm 2,041 2,722 3,686 Theoretical Disp in^3 134.1 178.6
More informationPRECISION SHEETMETAL
PRECISION SHEETMETAL Technical Data www.smcman.com Technical Data SMC - SETTING THE NEW STANDARD IN SHEETMETAL SMC - SETTING THE NEW STANDARD IN SHEETMETAL Technical Data SMC Precision Sheetmetal s story
More information72/96/130-70mm. Electric Specifications Input Power Source 230 VAC +/- 10% 3Ph 60Hz Std. Power. Machine kva 91 Supply
935 S P E C I F I C A T I O N S 72/96/130-70mm English Metric Injection Unit Specifications A B C A B C Injection Capacity, Max. GPPS oz 72 96 130 gm 2,041 2,722 3,686 Theoretical Disp in^3 134.1 178.6
More informationHeader Manifolds - 0 Design
Header Manifolds - 0 Design Header block mounting hardware is supplied. See page 179 for itemized list. Ordering Information Specifications, descriptions, and dimensional data are subject to correction
More information45mm. Electric Specifications Input Power Source 230 VAC +/- 10% 3Ph 60Hz Std. Power. Machine kva 35 Supply
330 S P E C I F I C A T I O N S 45mm English Metric Injection Unit Specifications A' A B A' A B Inj. Capacity, Max. GPPS oz 8 11 13 gm 226 312 368 Theoretical Disp in^3 15.3 19.4 24.0 cm^3 251 318 393
More informationPh: 1-(800) or (204) Fax: (204) Website:
JUST ARRIVED! Sahinler Press Model AP 1520-150 165 Ton Pressing Force 12 Stroke 60 Working Width 3/8 Bending Capacity (Punch and 4 Way Die Included) 24 x 60 Bed Area 15 HP Motor 220/3/60 New sells for
More informationGlobal Mfr. of LED and Industrial Grade Lighting Complete Closure of a 115,000 SF Facility
ONLINE AUCTION Global Mfr. of LED and Industrial Grade Lighting Complete Closure of a 115,000 SF Facility Metal Fabrication, Amada Press Brakes & Turret Punch Press Cells, Shears, Presses, Toolroom, Powder
More informationFBD-NT Press Brake Installation Guide
FBD-NT Press Brake Installation Guide Summary...2 Environmental conditions...2 Power supply...2 Machine installation...3 Location...4 Carrying...5 Using a crane...5 Using rollers...6 Foundation...7 Cleaning...7
More informationEquipment List. Tenere Inc. 700 Kelly Avenue, Dresser, WI General Inquiries: Sales Inquiries:
Revised 1/2019 Equipment List Tenere Inc. 700 Kelly Avenue, Dresser, WI 54009 General Inquiries: 715.755.2158 Sales Inquiries: 1.866.836.3734 Metal & Plastic Integrated Solutions (HQ) 700 Kelly Avenue,
More informationREAD AND SAVE THESE INSTRUCTIONS. Installation manual. DCC Charge controller for electric vehicle DCC-9, DCC-10. V2-6 Avril 2017.
READ AND SAVE THESE INSTRUCTIONS Installation manual DCC Charge controller for electric vehicle DCC-9, DCC-10 Manufactured by Designed by V2-6 Avril 2017 Patent Pending Table of contents ABOUT THIS MANUAL
More informationLED Downlight Ceiling Fixtures
ED Downlight Ceiling Fixtures Every attempt has been made to ensure that this documentation is as accurate and up-to-date as possible. However, Vertical Express assumes no liability for consequences, directly
More informationHeatExchanger & IndustrialRadiator INDUSTRIAL RADIATOR MANUFACTURER
HilcoTM WEBCAST/ONSITE AUCTION As Authorized by the Company Assets No Longer Required to the Ongoing Operations HeatExchanger & Radiator manufac turer INDUSTRIAL RADIATOR MANUFACTURER OVER (400) Lots Featuring
More informationEM-2033L CNC VERTICAL MACHINING CENTER
Page 1 of 11 Quote No. 021315-5 EM-2033L EM-2033L CNC VERTICAL MACHINING CENTER Page 2 of 11 Quote No. 021315-5 EM-2033L CHEVALIER s EM series VMCs are designed for high precision, productivity, and high
More information40 Ton and 50 Ton Ironworker
40 Ton and 50 Ton Ironworker 40 TON THE SHOPMATE 4 Workstations Maximum capacity: 1" diameter in 1/2" plate 40 Ton and 50 Ton Ironworker Throat depth: 7" Stroke: 1" Work Height: 38-1/2" Open Station Throat
More informationADJUSTABLE AIR PRESS
ADJUSTABLE AIR PRESS MODELS 12-A, 28-A, 50-A INSTALLATION, OPERATING, and MAINTENANCE INSTRUCTIONS Black & Webster Assembly Equipment Division 545 Hupp Ave. P.O. Box 831 Jackson, Michigan 49204 Phone:
More informationPRECICION 2010/11/11
PRECICION 1 CNC lathe M06 J / M08 J 2 Basic Structure M06/ M08 J 8-station turret tool post Hydraulic chuck axis Zaxis Slant 30 Sliding guide (X axis) High rigidity roller guide (Z axis) High rigidity
More informationGREEN ELECTRONICS ELECTRONIC DESIGNS SCOPE
GREEN ELECTRONICS ELECTRONIC DESIGNS SCOPE 1997-2015 15 years of Electronic Design Experience is what makes Green Electronics one of the most unique companies in the region. We have a vast experience in
More informationGreeting from President
Greeting from President Hiromoku Giken has been a special manufacturer of train car components with excellent expertise in manufacturing furniture at the foundation after changing the line of business
More informationHarding Steel Tri-Lift
Harding Steel Tri-Lift World Class Lifts since 1968 Harding Steel Tri-Lift Density Security Economy Tri-Lift System Description System Description: The Harding Steel Tri-Lift parking system is a 4-post
More informationCNC COMPOSITE PROCESSING MACHINE
SHENG HUI CNC COMPOSITE PROCESSING MACHINE ShengHu i V T M Series Composite Processing Machine T h e p er f ec t c o m b i n at i o n of m i l l i n g m ac h i n e an d ver t i c al l at h e Th e ve r
More informationFOR SALE. Former Husqvarna Outdoor Products Manufacturing / Distribution Facility 240,670± Total SF - Three (3) Buildings - 16.
FOR SALE EBERHARDT & BARRY INC. PROPERTY VIDEO: https://youtu.be/1hpliyviors https://youtu.be/-tlmoozdcr0 Former Husqvarna Outdoor Products Manufacturing / Distribution Facility 240,670± Total SF - Three
More informationMcQuay. Evaporative Condenser Cooled Chiller. EGR Vintage A. Last Manufactured: Replacement Parts List No Revision B 07/2010
Replacement Parts List No. 700015100 Revision B 07/2010 McQuay Evaporative Condenser Cooled Chiller EGR 060-240 Vintage A Last Manufactured: 2004 To find your Daikin Applied parts distributor, call 1-800-377-2787
More informationThat s E[M]CONOMY: NEW. Not just training: Real action! CONCEPT TURN 260. CNC training with industrial performance
[ That s ] E[M]CONOMY: NEW Not just training: Real action! CONCEPT TURN 260 CNC training with industrial performance Concept TURN 260 As a systematic advancement of the CT250, the CT260 convinces by its
More information30/40/55-70mm. Max. Total Capacity kva 83(25:1 L/D) or 93 (30:1 L/D) Machine Supply Transformer Size kva 93 Capacity Machine Requirements
440 S P E C I F I C A T I O N S 30/40/55-70mm English Metric Injection Unit Specifications A B C A B C Injection Capacity, Max. GPPS oz 30 40 55 gm 850 1,134 1,559 Theoretical Disp in^3 55.8 74.5 99.2
More informationNXV1020A. High Performance Vertical Machining Center
STANDARD FEATURES POWERFUL 25 HP IDD SPINDLE BBT TYPE HIGH SPEED 24 TOOL SWING-ARM ATC SYSTEM MXP 200FA WITH MANUAL GUIDE I 60 DEGREE CHIP AUGER 12,000 RPM MAXIMUM SPINDLE SPEED 40mm THK NR TYPE LINEAR
More informationMODEL RMS INSTALLATION INSTRUCTIONS. CONTENTS Page A. Introduction 1. Usage 2 2. How it operates 2
CONVEYOR COMPONENTS COMPANY Division of Material Control, Inc. 130 Seltzer Road, PO Box 167 Croswell, MI 48422 USA PHONE: (810) 679-4211 TOLL FREE (800) 233-3233 FAX: (810) 679-4510 Email: info@conveyorcomponents.com
More informationDescription. Repair. Rhinor XD2 Type-H Low Level Drum Proximity Sensor. Replacing the Proximity Sensor
Rhinor XD2 Type-H Low Level Drum Proximity Sensor Description See Figure 1. The Rhino XD2 Type-H Low Level Drum Proximity Sensor (1) monitors the distance between the bottom of the follower plate and the
More informationSPRINT linear Series. Highly productive automatic turning with linear Direct Drives
www.dmgmori.com SPRINT 20 8 linear SPRINT 42 8 linear SPRINT 42 10 linear SPRINT 32 / 42 linear CLASSIC Highly productive automatic turning with linear Direct Drives Series Applications and parts Machine
More informationWhen Your Articulated Robot Comes Up Short. Joe Campbell Vice President, Sales & Marketing, BU Manager Products Gudel, Inc
When Your Articulated Robot Comes Up Short Joe Campbell Vice President, Sales & Marketing, BU Manager Products Gudel, Inc Work Envelope Options Industry Trends Market Drivers 6 Axis Robot Examples Gantry
More informationEM2040L High-Speed CNC Vertical Machining Center
Page 1 of 8 8-180063 EM2040L High-Speed CNC Vertical Machining Center MACHINE FEATURES CHEVALIER s EM series VMCs are designed for high precision, productivity, and high speed machining in different industries,
More informationTyphoon B Series CNC Turning Centres
Typhoon B Series CNC Turning Centres www.colchester.co.uk Typhoon B Series CNC Turning Centres The Typhoon B Series constructed from a one piece cast, base incorporates FEM analysis to achieve an optimal
More informationThe Caldwell Group Fax
Model 82NC - Narrow Coil C Hook *Will not hang level when empty. Center of gravity must be centered under crane hook to prevent tilting of the lifter & load. Handles narrow coils with less coil edge damage.
More informationMARK YOUR CALENDARS! METAL DOOR FABRICATING OPERATION WITH PATENTS AUCTION CONDUCTED BY:
PUBLIC AUCTION BLACK MOUNTAIN DOOR, LLC MARK YOUR CALENDARS! Wednesday, May 9, 2018 11:00 A.M. EDT 310 Flint Drive Mt. Sterling, Kentucky, USA, 40353 INSPECTION: BY APPOINTMENT ONLY. Please call 416.962.9600
More informationSPRINT 20 5 SPRINT 20 8 SPRINT 32 5 SPRINT 32 8 CNC AUTOMATIC TURNING SPRINT 20 SPRINT 32 DMGMORI.COM
SPRINT 20 5 SPRINT 20 8 SPRINT 2 5 SPRINT 2 8 CNC AUTOMATIC TURNING SPRINT 20 SPRINT 2 DMGMORI.COM Machine and technology Concept Applications and parts Technical data Control technology SPRINT 20 5 /
More informationDesert Precision Mfg., Inc.
Desert Precision Mfg., Inc. Facilities List for Desert Precision Mfg., Inc. 4095 N. Highway Drive Tucson, AZ 85705 Phone (520) 887-4433 Fax (520) 293-9718 Website www.desertprecision.com Email info@desertprecision.com
More informationGENESIS OPAL PLANNING GUIDE. Unenclosed Platform Lift for commercial applications of up to 5 feet lifting height. Creating An Accessible World
GENESIS OPAL PLANNING GUIDE Creating An Accessible World Unenclosed Platform Lift for commercial applications of up to 5 feet lifting height Please note: Dimensions provided in this Guide are for REFERENCE
More informationKVR SERIES. Quality, Value, and Service MACHINING CENTERS. a.com /
KVR SERIES Quality, Value, and Service www.kentus a.com / www.kentcnc.com KVR SERIES precision by design KVR-4020A with 24-Tool Dual Arm ATC Go ahead make your cut! Be more competitive! In today s global
More informationZG 521 Padvault Three-Phase Transformer
E n g in e e r :R.An th o n Ap p r o v e r :Jo s h u a Jo n e s 2 0 De c 1 7 2 0 De c 1 7 ZG 521 Padvault Three-Phase Transformer ZG 521 Padvault Three-Phase Transformer 1. Scope This material specification
More informationAD-SERVO HYBRID PRESS BRAKES
AD-SERVO HYBRID PRESS BRAKES It s difficult to compete in today s world with yesterday s technology. We have solutions. JMTUSA.com Email: JMT@JMTUSA.com Toll Free: 855-773-7727 (855-PRESS-BRAKE) JMT machines
More informationThe Caldwell Group Fax
Model 82NC - Narrow Coil C Hook *Will not hang level when empty. Center of gravity must be centered under crane hook to prevent tilting of the lifter & load. Handles narrow coils with less coil edge damage.
More informationDOUBLE ENDED AXLE MACHINE IS INCREASING AXLE DEMAND... AT A GLANCE. Welding. to robotic input conveyor feed... From robotic part pick-up...
MTIwelding.com IS INCREASING AXLE DEMAND... Out-pacing your manually loaded, single-end, axle welder s capability? Straining your scheduling because of long tooling change-overs? Overloading current cycle
More informationBREAK-SAFE Load Break & Pick-up Tool
BREAK-SAFE Load Break & Pick-up Tool USBS-15-1-PS USBS-15-2-PS USBS-27-1-PS USBS-27-2-PS USBS-38-1-PS USBS-38-2-PS USBS-46-1-PS USBS-46-2-PS Available Options: H - Hard Case S - Soft Case Second Generation
More informationTP ZETA. Advanced Line. Automatic punching machine 15 stations Fully auto-index
TP ZETA Advanced Line Automatic punching machine 15 stations Fully auto-index EN 2 TP ZETA Performance and unlimited power TOP OF THE RANGE, UNIQUE IN THE MARKET TO NOT FEAR THE HIGH PUNCHING FREQUENCIES
More informationDouble Column Machining Center VM3018A With FANUC 0i MF LINEAR GUIDE WAY ON ALL THREE AXIS
Offer date:2017/2/8 Quotation No.VM3018AFMF20170208A Double Column Machining Center VM3018A With FANUC 0i MF LINEAR GUIDE WAY ON ALL THREE AXIS Stock Machine for Index: A.) General Machine Description
More informationTP OMEGA. Smart Line. Automatic punching machine 5 stations Fully auto-index
TP OMEGA Smart Line Automatic punching machine 5 stations Fully auto-index it 2 TP OMEGA Evolved and performing PUNCHING MACHINE IDEAL FOR SMALL AND MEDIUM PRODUCTIONS 1 Servo-electric 2 Accessibile 3
More informationMODEL CMS INSTALLATION INSTRUCTIONS A. INTRODUCTION 1. USAGE 2 2. HOW IT OPERATES 2 B. SPECIFICATIONS 1. ELECTRICAL 3 2.
CONVEYOR COMPONENTS COMPANY 130 Seltzer Road, PO Box 167 Croswell, MI 48422 USA PHONE: (810) 679-4211 TOLL FREE (800) 233-3233 FAX: (810) 679-4510 Email: info@conveyorcomponents.com http://www.conveyorcomponents.com
More informationT300MVi JK OEM POWER CELLS MEDIUM VOLTAGE VACUUM CONTACTOR. Reliability in motion. Reliability in motion
MEDIUM VOLTAGE VACUUM CONTACTOR T300MVi JK OEM POWER CELLS Reliability in motion Reliability in motion 400 AMPERE AT 2300-6600 VOLTS (7200 VOLT MAX) DRAWOUT AND FIXED APPLICATIONS JK OEM PART NUMBER DESCRIPTION
More informationSingle-Phase Step Voltage Regulator
Single-Phase Step Voltage Regulator - Overhead Mounted - Page 1 of 12 Table of Contents 1 GENERAL... 3 2 CONSTRUCTION... 3 3 RIV REQUIREMENT... 7 4 REGULATOR CONTROLS... 7 5 TESTS... 9 6 EVALUATION...
More informationLSC-100 TRANSFER CAR SYSTEM INSTALLATION MANUAL F9601 JUNE 1997 US$250
LSC-100 TRANSFER CAR SYSTEM MANUAL 466364F9601 JUNE 1997 US$250 World Headquarters 801 Johnson St. Alpena, Michigan, 49707 U.S.A. Phone (517) 354-4111 COMPANY NAME:... SERIAL NUMBER:... ASSEMBLY NUMBER:...
More informationElectric Vehicle Charging Station
EVoReel Electric Vehicle Charging Station INSTALLATION GUIDE AND USER MANUAL Model: Dual Output Pedestal Mount 30A EVoReel EVSE Model Numbers: With Basic EVSE: EV072-400-002A; With Intelligent ievse: EV072-410-002A;
More informationENGINEERING DEPARTMENT SHEET METAL DEPARTMENT
ENGINEERING DEPARTMENT 3) SOLIDWORKS PROGRAMMING SYSTEM 3) PRO-E SOFTWARE 3) AUTOCAD SOFTWARE 2) CADKEY PROGRAMMING SYSTEM 2) BYSOFT LASER PROGRAMMING SYSTEM 2) METALSOFT PROGRAMMING SYSTEM 2) 3 CAD WORKSTATIONS
More informationContact Details: Mail Id:
Product Brochure Contact Details: +91 8308839755 Mail Id: savikenterprises@yahoo.co.in Contents Solid State Relay... - 3 - Thyristor Heater/Power Controllers... - 6 - Emergency Alarm System... - 9 - Thyristor
More informationStandard Accessories for HA
MODEL HA06-322 HA06-322 É 26.5 200 324. Specifications Model HA06-322 38 Max. Throat Depth Punching Capacity (for Mild Steel) Diameter Thickness 2-3/8" (60) 7/8" (22) /2" (3) 76 2 50.5 83 30 4.5 24 60.
More informationUsed Machines PRODUCT CATALOGUE April 2018
144 Lamp Road Wadeville Germiston Tel: +27 (0) 11 824 0387 Cell: +27 (0) 72 834 3164 www.metalchipmachinery.co.za Used Machines PRODUCT CATALOGUE April 2018 Please contact Malcolm Moriarty malcolm.mcm@mweb.co.za
More informationHIGH EFFICIENCY VERTICAL MACHINING CENTER
HIGH EFFICIENCY VERTICAL MACHINING CENTER 1 HIGH EFFICIENCY VERTICAL MACHINING CENTER FACE MILL S45C Steel Material Removal Rate 138cc/min. EV1020A is built with state-of-the-art technology in mind and
More informationSPACEMASTER WIRE ROPE HOISTS
SPACEMASTER WIRE ROPE HOISTS The Spacemaster SX represents an innovative design that includes a large drum diameter giving Spacemaster SX hoists the lowest headroom and best wheel loads in the industry
More informationAmada Fbd 1253 Nt Brake Press Manual READ ONLINE
Amada Fbd 1253 Nt Brake Press Manual READ ONLINE If you are looking for the book Amada fbd 1253 nt brake press manual in pdf form, in that case you come on to faithful website. We present the utter option
More informationSPECIFICATIONS ITEM WHL-55 WHL-68 SPECIFICATIONS ITEM PROCESSING CAPACITY STROKE SPINDLE TURRET SERVO MOTOR RAPID TRAVERSES BALLSCREW OD AND THREAD TR
SPECIFICATIONS ITEM WHL-55 WHL-68 SPECIFICATIONS ITEM PROCESSING CAPACITY STROKE SPINDLE TURRET SERVO MOTOR RAPID TRAVERSES BALLSCREW OD AND THREAD TRAVERSE RATE TURNING FLUID UNIT HYDRAULIC UNIT LUBRICATION
More informationThermal Imaging Infrared Survey. Report. Report. Thermography Inspection at ABC Company.
Thermal Imaging Infrared Survey Report. Thermal Imaging Infrared Survey Report. Thermography Inspection at ABC Company. Vancouver,BC May 25,2012 www.aiturgroup.com info@aiturgroup.com Rick Turdubay, Certified
More informationSection 02: Pre-Installation Procedures
Section 02: Pre-Installation Procedures Foundation! WARNING The MUST be placed on a surface that will support the combined weight of the, options, fixtures, and tooling, etc. (refer to the Specifications
More informationNew Commercial Service Request-Job Process
New Commercial Service Request-Job Process HILCO Electric Cooperative, Inc. thanks you for the opportunity to be your electric provider. We are committed in providing you the best electric service promptly
More informationRT Series Step Down Transformer for RT Series UPS 6-10kVA UL Input Vac Output Vac User Guide
RT Series Step Down Transformer for RT Series UPS 6-10kVA UL Input 208-240 Vac Output 208-120 Vac User Guide UNLESS SPECIFICALLY AGREED TO IN WRITING, SELLER (A) MAKES NO WARRANTY AS TO THE ACCURACY, SUFFICIENCY
More informationOIL SMART PLUG AND PLAY SYSTEM, Model #OSS-100
OIL SMART PLUG AND PLAY SYSTEM, Model #OSS-100 The Oil Smart OSS-100 System, when combined with a manual sump pump, will automatically pump water without the risk of pumping oil into the environment. Additionally,
More informationPRESS BRAKES. Flexible Bending Solutions. It s difficult to compete in today s world with yesterday s technology. We have solutions.
FBS PRESS BRAKES Flexible Bending Solutions It s difficult to compete in today s world with yesterday s technology. We have solutions. JMTUSA.com Email: JMT@JMTUSA.com Toll Free: 855-773-7727 (855-PRESS-BRAKE)
More informationCITY OF WEST PALM BEACH
REVISION: OCT. 2018 SUBMERSIBLE LIFT STATION - WET WELL SECTION VIEW SLS-2 WETWELL DATA PUMP/ELECTRICAL DATA REVISION: OCT. 2018 SUBMERSIBLE LIFT STATION - REQUIRED DATA SLS-3 PUMP TEST / START-UP FORM
More informationVertex Plus, Vertex V60, Solus & Cardio Camera Site Planning Document
Vertex Plus, Vertex V60, Solus & Cardio Camera Site Planning Document 9347-0101 Rev B Sec 1: Room Requirements...1-1 Sec 2: Room Layouts...2-1 Sec 3: Anchor Details...3-1 Sec 4: Gantry Cables...4-1 Sec
More informationModern ManufacturingServices.LLC. Attachments And Auxiliary Equipment
Attachments And Auxiliary Equipment Proudly Manufactured in the USA Modern ManufacturingServices.LLC 640 East Main Street Palmyra NY 14522 Phone 585-289-4261 Fax 585-289-7909 Unwinds And Folding Systems
More informationModel 550 Series Vibration Switches
OPERATION MANUAL Vibration Switches Includes: 550 550M 550-X 550M-X Page 2 SECTION TITLE PAGE 1. INTRODUCTION... 2 2. FEATURES... 3 3. WIRING... 4 4. ANALOG METER... 4 5. TESTING... 4 6. INSTALLATION...
More informationUnderwater LED Light to 60 meters - Aluminum Housing - 12 Watts Lumens - 10 Inch Cable
Underwater LED Light to 60 meters - Aluminum Housing - 12 Watts - 720 Lumens - 10 Inch Cable Part #: LEDEUL4-10ST Made in the USA NSN for this product: 6210-01-647-7649, Light Emitting Diode The LEDEUL4-10ST
More informationXCITE Owner s Manual. Reso-not TM Damping System XCITE 1502C HYDRAULIC POWER SUPPLY
Reso-not TM Damping System XCITE Owner s Manual 1502C HYDRAULIC POWER SUPPLY Xcite Systems Corporation 675 Cincinnati RDS Batavia - 1 Pike Cincinnati, Ohio 45245 Tel: (239) 980-9093 Fax: (239) 985-0074
More informationTyphoon L Series CNC Turning Centres
Typhoon L Series CNC Turning Centres www.colchester.co.uk Typhoon L Series CNC Turning Centres The Typhoon Series constructed from a one piece cast base, incorporates FEM analysis to achieve an optimal
More informationFor Conduit Inspections
Underground Conduit Standards - Table of Content 5/8/2017 Section S22 Underground Conduit Standard Index: Description: 00 Table of Content 01 General Notes 02 Definition of Terms 03 Primary Riser Conduit
More informationTrust And Reliability. Roller Guide System V33/V43 VERTICAL MACHINING CENTER LONG CHANG MACHINERY CO., LTD.
Trust And Reliability Roller Guide System V33/V43 VERTICAL MACHINING CENTER LONG CHANG MACHINERY CO., LTD. V33/V43 FEED SYSTEM Heavy duty linear ways are imported from Germany, which are well balanced,
More informationAuction Catalog. Auction Date:
Auction Catalog Satowfi Machining Solutions LLC. Auction Date: Thursday, July 26, 2018 Lots Start Closing: 10:00 AM MST KD Auctions 7918 E.McClain Dr. Suite 101 Scottsdale, AZ 85260 Phone: (480) 455-3910
More informationw w w. j y o t i. c o. i n Performance Series Vertical Machining Center
w w w. j y o t i. c o. i n Performance Series Vertical Machining Center Performance Series Vertical Machining Center Overview To match the demand of greater accuracy and total reliability at higher speeds
More informationGTZ-2000 SERIES. Multi-tasking Turning Centers
GTZ-2000 SERIES Multi-tasking Turning Centers Brand New Multi-Tasking Machining Technology New twin spindle and twin turret combination Upper and lower turret can be adjusted based on different machining
More informationTrans-Motion has Manufactured Welding and Industrial reels for a broad range of applications since 1985.
Reels for mobile & shop applications 2011.1 Catalog Trans-Motion has Manufactured Welding and Industrial reels for a broad range of applications since 1985. Reels for Industrial & Welding Applications
More informationPSU ¾ HP PUMP RETROFIT
HI-Q Environmental Products Co. Air Sampling Equipment, Systems & Accessories 7386 Trade Street San Diego, California 92121-2422 Phone: (858) 549-2820 Fax: (858) 549-9657 Web: www.hi-q.net PSU ¾ HP PUMP
More informationFor technical questions and replacement parts, please call
Digital CLAMP MULTIMETER 42396 95652 OPERATING INSTRUCTIONS Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd., Camarillo, CA
More informationDUCT-O-BAR HD Series Conductor Systems 500, 1000 & 1500 Ampere Sizes
DUCT-O-BAR HD Series Conductor Systems 500, 1000 & 1500 Ampere Sizes A high amperage system of heavy duty conductor bars for large cranes and mobile equipment where strength, reliability and safety are
More informationLuminous Patterns Panels
Luminous Patterns Panels Installation Instructions (English) Preliminary version - Subject to change - Panels must be installed by a qualified electrician in accordance with all national and local electrical
More informationGTZ SERIES. Multi-tasking Turning Centers
GTZ SERIES Multi-tasking Turning Centers BRAND NEW MULTI-TASKING MACHINING TECHNOLOGY New twin spindle and twin turret combination Upper and lower turret can be adjusted based on different machining requirements
More informationEMERY SKY SUSPENDED LED LUMINAIRE
EMERY SKY SUSPENDED LED LUMINAIRE IP20 DRY LOCATION 120V- 277V AC SAFETY & WARNINGS 1. READ AND FOLLOW ALL SAFETY INSTRUCTIONS 2. Install in accordance with national and local electrical code regulations.
More informationQuickSpecs. HP 480/277 Volt Solutions. Overview
Overview As the quest for efficiency continues it becomes apparent that what worked in the past needs improvement. More and more data center managers are looking at alternate power plans to distribute
More information