Typhoon L Series CNC Turning Centres

Transcription

1 Typhoon L Series CNC Turning Centres

2 Typhoon L Series CNC Turning Centres The Typhoon Series constructed from a one piece cast base, incorporates FEM analysis to achieve an optimal structure to further enhance machine rigidity and stability.

3 Extreme Turning for the Next Generation! The Typhoon Series offers high productivity and highly accurate performance, giving exceptional cutting capacity and component finish. The Typhoon Series is your best choice for ultra performance turning operations. With the Y-axis function, the Typhoon Series can exceed your needs for higher level cutting.

4 The Typhoon L Series 2, 3 & 4 axis Turning Centres Chuck Size: 6 / 8 / 10 Head Stock The spindle has labyrinth seals to prevent exposure to moisture and dust and is supported by NN double-row bearings, combined with thrust ball bearings. Bar Capacity: Ø45mm / Ø52mm / Ø65mm Max. Working Length: 300mm / 550mm Max. Turning Diameter: Ø400mm / Ø380mm Spindle Nose: A2-5 / A2-6 Roller Type Guideway The Typhoon Series incorporates a high quality linear guide system offering better accuracy, higher speed and lower friction than boxed way versions.

5 Highly accurate cutting is achieved through the one piece cast base that incorporates FEM analysis. This helps to achieve an optimal structure to further enhance machine rigidity and stability. The 30º slant bed design has a low centre of gravity for easier swarf management and better ergonomics. Separated Independent Coolant Tank The independent coolant tank employs an active type oil fluid separation tank. When used together with an optional oil fluid separator, consistent fluid quality is assured. Easy chip removal and predrilled holes for fitting a high pressure pump provides increased convenience. Hydraulic Turret (STD) A low noise and high torque DANFOSS hydraulic system is used to enhance the turret clamping force as well as toolstation changeover times. Manual Tailstock The highly rigid tailstock structure combined with the hydraulic centre reduces cutting vibration. The tailstock can be easily positioned through manual connection with the turret. Direct Drive Motor A directly coupled ballscrew transfers energy without waste.

6 The Typhoon L - M / MY Series Slant Bed CNC Lathe Chuck Size: 6 / 8 / 10 Bar Capacity: Ø45mm / Ø52mm / Ø65mm Max. Working Length: 450mm Max. Turning Diameter: Ø300mm Spindle Nose: A2-5 / A2-6 BMT Power Turret The highly rigid BMT turret has a large torque output and stronger tool locking mechanism to handle heavier cutting conditions while improving tool interference. The BMT turret is ideal for heavy turning and milling applications. True Linear Y-Axis The true linear Y-axis provides improved straightness and ensures excellent positioning accuracy to satisfy all high precision cutting needs.

7 Cutting Performance Load Monitor Function To increase productivity, the Fanuc control system has an axis load monitoring function to give advanced warning of tool wear. Removal Rate 475mL/min Roundness 0.6μm Surface Roughness 0.592μm Material/Diameter Spindle speed (rpm) Depth of cut (d) Cutting speed (Vc) Feedrate S45C/Ø66 900rpm 5mm 187m/min 0.51mm/rev Material/Diameter 0601/Ø91 Spindle speed (rpm) 2140rpm Depth of cut (d) 0.05mm Cutting speed (Vc) 612m/min Feedrate 0.05mm/rev Material/Diameter 6061/Ø91 Spindle speed (rpm) 2140rpm Depth of cut (d) 0.05mm Cutting speed (Vc) 612m/min Feedrate 0.05mm/rev Options Manual / Auto Tool Presetter The tool presetter shortens tool set up time and can easily measure tool wear to ensure machining accuracy. Parts Catcher The parts catcher is a synchronised design for quick collection of finished components. Parts Conveyor The parts conveyor is combined with the barfeeder, allowing the machine to perform fully automatic operations.

8 Spindle Power Output / Torque Diagram / Travel Diagram Spindle Power Output / Torque Diagram β12/7000i (Typhoon L Series) α8/8000i (Typhoon L42 / L52 M/MY Series) α12/7000i (Typhoon L52 / M / MY Series) α2/10000i (Typhoon L - M / MY Series C-axis Turret Motor) Travel Diagram Typhoon L45 / L52 Compact (L65 Compact) Typhoon L45 / L52 / L65

9 Travel Diagram / Tooling System Travel Diagram Typhoon L45M / L52M Typhoon L45M / L52M Typhoon L45MY / L52MY Typhoon L65MY Tooling System Typhoon L Series V10 / V12 (STD/OPT) Typhoon L - M / MY Series Power Turret BMT-55

10 Tool Interference Diagram / Dimensional Drawing Tool Interference Diagram Typhoon L Series V10 (STD) Typhoon L Series V12 (OPT) Typhoon L - M Series Power Turret BMT-55 Typhoon L - MY Series Power Turret BMT-55 Dimensional Drawing L45 / L52 / L65 Compact L45 / L52 / L65 M MY

11 Machine Specifications CONTROLLER TYPHOON L SERIES L45 COMPACT L45 L52 COMPACT L52 L65 COMPACT L65 FANUC 0i-TF CAPACITY Swing over bed mm Ø560 Swing over saddle mm Ø365 Max. Turning diameter mm Ø400 Max. Turning length mm Distance between centres mm Bar Capacity mm Ø45 Ø52 Ø65 Chuck size Inch 6" 8" 10" STROKE X-axis stroke mm Y-axis stroke mm - Z-axis stroke mm FEEDRATE Axial rapid feedrate m/min X:30, Z:30 Cutting feedrate m/min SPINDLE Spindle speed rpm Spindle nose - A2-5 A2-6 Spindle taper - 1/20 Spindle nose diameter mm Ø55 Ø66 Ø76 TURRET Turret style and storage capacity - Hyd. V10 (opt.v12) Square tool dimension mm 25x25 (opt. V12 20x20) Boring tool dimension mm Ø40 (opt. V12 Ø32) Turret indexing time (T to T) sec 0.38 M-axis tool speed rpm - M-axis tool motor output (cont./15 min) kw - TAILSTOCK Tailstock movement type - Manual Tailstock body stroke mm 450 Quill movement type - Hydraulic Quill stroke mm 80 Quill diameter mm Ø70 Quill taper - MT4 Max. quill thrust kg 250 MOTOR Spindle motor output (cont/30 min) kw 11/15 Axial servo motor output kw X:1.8, Z:1.8 X/Z AXIS ACCURACY Positioning accuracy (VDI 3441) mm 0.01 Repeatability accuracy (VDI 3441) mm HYDRAULIC SYSTEM Hydraulic pump motor output kw 1.5 Hydraulic pressure PSI 560 Hydraulic tank capacity L 30 COOLANT TANK Coolant motor output kw 0.75 Coolant tank capacity L Lub. Tank capacity L 3 OTHER Power requirements KVA 25 Machine size mm 2422 x 1573 x x 1687 x x 1573 x x 1687 x x 1573 x x 1687 x 1700 Machine weight kg All specifications, dimensions and design characteristics are subject to change without prior notice.

12 Machine Specifications TYPHOON L SERIES L45M L52M L65M L45MY L52MY L65MY CONTROLLER FANUC 0i-TF CAPACITY Swing over bed mm Ø560 Ø670 Swing over saddle mm Ø365 Ø380 Max. Turning diameter mm Ø380 Ø300 Max. Turning length mm Distance between centres mm Bar Capacity mm Ø45 Ø52 Ø65 Ø45 Ø52 Ø65 Chuck size Inch 6" 8" 10" 6" 8" 10" STROKE X-axis stroke mm Y-axis stroke mm (±50) Z-axis stroke mm FEEDRATE Axial rapid feedrate m/min X:30, Z:30 X:30, Y:10, Z:30 Cutting feedrate m/min SPINDLE Spindle speed rpm Spindle nose - A2-5 A2-6 A2-5 A2-6 Spindle taper - 1/20 Spindle nose diameter mm Ø55 Ø66 Ø79 Ø55 Ø66 Ø79 TURRET Turret style and storage capacity - BMT-55 Square tool dimension mm 25 x 25 Boring tool dimension mm Ø40 Turret indexing time (T to T) sec 0.38 M-axis tool speed rpm 4000 M-axis tool motor output (cont./15 min) kw 2.2/3.7 TAILSTOCK Tailstock movement type - Manual Tailstock body stroke mm Quill movement type - Hydraulic Quill stroke mm Quill diameter mm Ø70 Ø90 Quill taper - MT4 MT5 Max. quill thrust kg 250 MOTOR Spindle motor output (cont/30 min) kw 11/15 Axial servo motor output kw X:3.0, Z:3.0 X:3.0, Z:30, Y:3.0 X/Z AXIS ACCURACY Positioning accuracy (VDI 3441) mm 0.01 Repeatability accuracy (VDI 3441) mm HYDRAULIC SYSTEM Hydraulic pump motor output kw 1.5 Hydraulic pressure PSI 710 Hydraulic tank capacity L 30 COOLANT TANK Coolant motor output kw 0.75 Coolant tank capacity L 100 Lub. Tank capacity L 3 OTHER Power requirements KVA Machine size mm 2672 x 1687 x x 1857 x 1892 Machine weight kg All specifications, dimensions and design characteristics are subject to change without prior notice.

13 Standard and Optional Accessories Standard Option x Not Available L45 COMPACT L45 L52 COMPACT L52 L65 COMPACT TYPHOON L SERIES L65 L45M L45MY L52M L52MY L65 L65MY SPINDLE MOTOR 7.5/11 kw (cont. / 30 min) x x x x 11/15 kw (cont. / 30 min) TURRET Hydraulic Turret V10 x x x V12 x x x Servo Turret V10 x x x V12 x x x Power Turret BMT-55 x x x SLEEVE Sleeve Specification H40 H40 H40 E40 E40 E40 Boring Bar Sleeve Ø6 Ø8 Ø Ø Ø Ø Ø Ø32 Drill Sleeve MT MT3 TOOLHOLDER O.D. Toolholder 4/5 (V10/V12) 4/5 (V10/V12) 4/5 (V10/V12) 4/5 (V10/V12) 4/5 (V10/V12) 4/5 (V10/V12) Facing Toolholder I.D. Toolholder 5/6 (V10/V12) 5/6 (V10/V12) 5/6 (V10/V12) Axial drilling and milling toolholder x x x Radial drilling and milling toolholder x x x CHUCK Collet Chuck Hollow Hydraulic 3-jaw Chuck 6" x x x x 8" x x 8"B x x x x 10" x x Hard Jaw (3 pcs/set) Soft Jaw (3 pcs/set) Footswitch control for chuck TAILSTOCK Manual Tailstock x x Programmable Tailstock x x x Live Centre MT4 x x x x x x MT5 x x x x x x x x x CONTROLLER FUNCTION Fanuc 0i-TF Auto Power Off Bar Feeder Interface Dynamic Graph Simulation Rigid Tapping RS232 & PCMCIA Interface Ethernet MACHINE ACCESSORIES Manual / Auto Tool Presetter Levelling Set Screws & Parts Side Discharge Chip Conveyor & Chip Cart Rear Discharge Chip Conveyor & Chip Cart Product Conveyor Parts Catcher Heat Exchanger Air Conditioner Oil Skimmer Oil Mist Collector Bar Feeder Front Air Blast Tool Box & Service Tools Operation / Maintenance Manual Coolant System Automatic Lubrication System 3 Colour Warning Lamp Working Lamp Transformer / Voltage Stabiliser Standard and optional equipment listed above are for reference only. The correct information is dependent on each customer order.

14 Support & Service Buy Spare Parts With over 4 million of Colchester, Harrison & Clausing spares, our experts are there to help you identify the correct replacement part and ensure prompt delivery every time. Valuable Training Whether it s when your new machine arrives, or more intensive courses to ensure that you make the most of your machine tool, our applications specialists are there to support you. Reliable Servicing Our factory trained engineering team are always available to support your machine tool, either through our dedicated helpdesk or out in the field. Delivery & Installation Our highly trained transport and service teams are on-hand to effectively deliver, install and commission your machine tool exactly to your satisfaction. Machine Tool Finance Colchester Machine Tool Solutions offer a range of innovative and highly competitive finance packages to support your machine tool purchase. Preventative Maintenance We work closely with you on a range of preventative maintenance contracts ensuring your assets are utilised fully, whether for one machine or a workshop of our machine tools. If you would like to arrange a demonstration or discuss your specific needs, please contact our sales team on mail@colchester.co.uk Certificate No. FM12345 Colchester Machine Tool Solutions Union Street Heckmondwike West Yorkshire WF16 0HL TYPH-L-CNC-03/18