Servo/Hydraulic Press Brake With Automatic Tool Changer HD 1003 ATC

Transcription

1 Servo/Hydraulic Press Brake With Automatic Tool Changer HD 1003 ATC

2 The HD NT Press Brake An ultra-high precision, down-acting system featuring advanced hydraulics that provide the ultimate in positioning accuracy. Unique Hybrid Drive System AC Servo Motor Pressure Tank Two-Way Piston Pump Cylinder Piston Independent AC-servo motors drive high efficiency, bi-directional hydraulic pumps Extremely fast approach, bending and return speeds provide faster cycle times and result in more parts per hour Unequalled ram positioning and repeatability of ± Programmable ram tilting and 50% off-center bending capacity allows for quick set-up of multiple stage part bending Low power consumption hydraulic pump motors are on only when the ram is moving Stable hydraulic oil temperature ensures consistent angular accuracy Less hydraulic oil and fewer oil changes required Very low noise level Servo-hydraulic Drive Principle Upper Table Rapid Rising Rapid Lowering Precise Dynamic Constant bending result Quiet Energy-efficient Eco-friendly Bending Process

3 HD 1003 ATC Press Brake Automatic Tool Changer (ATC) and Bend Indicator technology eliminate time-consuming setup and costly test bends. The high-performance HD series features a Hybrid Drive system that is engineered for low energy consumption and requires less hydraulic fluid than conventional machines. In addition to being eco-friendly, Amada s Hybrid Drive system maintains a high rate of repeatability (± ). Equipped with an automatic tool changer, the HD-ATC provides unmatched flexibility and productivity. The ATC is capable of storing more than 86 feet (26.4 m) of precision tooling. Locating and loading the appropriate tooling is performed quickly and efficiently. The system s four-axis manipulator precisely selects and places punches and dies from the tool magazine avoiding costly delays typically associated with conventional tool changes. Key Benefits: Quicker and more precise tool set-up compared to manual operation Perfect for small lot sizes Reduced requirements for the operator Ideal for complex tool layouts Large open height allows for a variety of part geometries to be formed Auto-slide 3-position foot pedal for fast convenient stage bending HD-ATC Components Hybrid Drives AMNC/PC Control Punch Stockers AKAS Laser Safety System Automatic Bend Indicator Die Stockers Auto Slide Foot Pedal Safety Gate

4 HD-ATC Tool Changer 15 Punch Stockers 18 Die Stockers 86 Tool Capacity Punch Reversal Unit 4 Tool Layout units (2 punch, 2 die) for quick, precise tool changes A total of 4 manipulators automatically provide precise tool layout Rotating stockers enable punches to be installed in reverse orientation The motorized foot pedal moves to the tool station where the next bend is produced Multiple Axis Backgauge 6-axis backgauge plus 2 additional L-axes provide L-Shift functionality (for gauging of complex part geometries) High-speed movement on all axes ensures that the gauge fingers are positioned as quickly as the operator positions the part 6-axis backgauge including L-Shift functionality Independent servo drives for L axis as well as L shift allow for tapered and offset gauging Tool navigator software positions backgauge where each tool needs to be installed, shortening the tool installation process Unprecedented positioning repeatability ± Extended gauging allows for up to a 39 flange dimension Low-profile design enables part positioning over the top of the backgauge

5 BI-S Bend Indicator Sensor The BI-S is a high-speed, high-precision, probe-style bend indicator sensor that measures and adjusts the bend angle on the fly Bend Indicator technology eliminates test bends and reduces setup Automatic angle adjustment ensures high-quality production bending even when material thickness and hardness varies from part to part Compensates for any environmental factor that effects bend angle to produce high-accuracy bends even if the operator lacks experience Comes standard on HD series brakes from tons Automatic detection and compensation of spring back Usable with 1V- dies ( ) Variable Slit Crown Bed Amada s patented slit crown bed design combined with a simple lever adjustment, provides consistent angle accuracy The wedge setting calculated by the AMNC control is adjustable according to material type and thickness The crown setting is adjustable based on material type and thickness and is accurate for the entire material length AMNC/PC PC Control with Network Capabilities Amada s AMNC-PC control with touch-screen offers multiple modes of data entry (angle, depth, 2D and 3D) for the utmost in programming flexibility Through the Bend-Navi feature on the AMNC-PC control, or with Amada s Dr. ABE Bend offline programming software, operators are provided with a 3D simulation of the bending process which reduces setup time and bend errors Graphic tool library and tool set-up graphics assist operators in the quick setup of complicated parts Amada s SDD database software provides for program storage on the control or on a server when the control is networked, providing secure storage of machine setup and program data Bar code scanner provides simplified and immediate retrieval of stored programs Adjustment of all machine axis can be accomplished through use of control mounted handwheel

6 Dimensions Specifications Press Brake Automatic Tool Changer (ATC) Complete System Tonnage 100 KN (110 ton) Tool Style AMTS ATC Total Length 6080 mm (239.4 ) Open Height 620 mm (24.4 ) Punch Stockers 15 Total Width 3010 mm (118.5 ) Stroke 200 mm (7.9 ) Die Stockers 18 Total Height 2915 mm (114.8 ) Maximum Bend Length 3060 mm ( ) ATC Location Right Hand Total Weight 10,200 kg (22,487 lb.) Distance Between Frames 2700 mm (106.3 ) Max. Tool Layout Length 3060 mm ( ) Supply Power 10 KVA Backgauge 6 axis plus 2 axis L- Shift Auto Tool Layout Range 3000 mm (118.1 ) Voltage 200 V Oil Capacity 48 liters (12.7 gal.) Minimum Tool Pitch 5 mm (.196 ) Foot Pedal 2, Auto Slide and Remote Max. Approach Speed 120 mm/sec. (4.72 /sec.) V Range 4-40 mm ( ) Bend Control Auto Bend Indicator- Slide Max. Bending Speed 10 mm/sec. (39 /sec.) Punch Reversal Unit Yes Crown Auto Wedge Type Max. Return Speed Control 120 mm/sec. (4.72 /sec.) Amada AMNC/PC Punch Height 170 mm (6.7 ) Standard 220 mm (8.7 ) Special Safety AKAS 3F, Safety Gate (Tool Change), Light Guard (Slide Pedal) Amada America, Inc Firestone Boulevard Buena Park, CA (714) FAX (714)