QUALITY FROM THE CUTTING EDGE OF FABRICATION

Transcription

1 BENDING EFFECTIVE July 2005 QUALITY FROM THE CUTTING EDGE OF FABRICATION

2 TABLE OF CONTENTS COMBINATION OF DIES & PUNCHES º & 90º PUNCHES º & 90º NARROW RELIEF PUNCH & NARROW PUNCH º & 90º GOOSENECK PUNCHES º & 90º SASH PUNCHES ACUTE ANGLE PUNCHES RADIUS PUNCHES / FLATTENING PUNCHES PUNCH HOLDER & RADIUS RULERS QUICK CHANGE 2 "V" DIES QUICK CHANGE ACUTE ANGLE 2 "V" DIE º & 90º 2 "V" DIES ACUTE ANGLE 2 "V" DIE º & 90º 2 "V" DIES LOW PROFILE 2 "V" DIES ACUTE ANGLE 2 "V" DIES DIE RAIL & HOLDERS º & 90º SASH 1 "V" DIES RAIL TYPE SASH 1 "V" DIES ACUTE ANGLE 1 "V" DIES SASH 1 "V" DIE RAIL HOLDERS LARGE "V" DIE HOLDER LARGE "V" DIES FLATTENING DIES POLYURETHANE DIES & DIE HOLDERS STANDARD OFFSET TOOLS HEMMING PUNCH & DIES ASTRO ROBOTIC TOOLING ONE TOUCH HOLDER & ACCESSORIES PRESS BRAKE ACCESSORIES REPLACEMENT PARTS AIR BENDING FORCE CHART AMADA QUALITY TOOLING Amada America, Inc. (AAI) has installed thousands of precision press brakes since The knowledge gained from this experience has confirmed our conviction that the use of superior tooling ensures optimum performance each and every time the press brake is used. This, in turn, guarantees you the edge in productivity you need to stay ahead of the competition. AMADA Tooling is through-hardened and finish ground with all critical tolerances carefully monitored. In addition, the tooling comes in standardized lengths in a wide variety of shapes designed to meet virtually any forming need. And, since a full inventory of tooling is stocked at our LA MIRADA, CA facility, we are able to respond to your tooling needs in a timely and efficient manner

3 INCREASE YOUR BENDING PRODUCTIVITY WITH ONE TOUCH Amada s One Touch Holder and tooling allows the brake operator to change punches on the press brake quickly and safely without the need for a wrench. The patented One Touch design allows you to decrease your tooling changeover time, thereby increasing your bending productivity. One Touch Tool Holders and accessories are available for all Amada press brake models. See page 38 in this catalog for all One Touch Holder items. Fast and Easy Tool Set-up With the One Touch Punch Holder, installation is a simple two-step process. Simply slide the grooved punch into the One Touch Punch Holder. Turn the lever to secure the punch in the One Touch Punch Holder. Improved Productivity The One Touch Punch Holder will increase productivity in a variety of ways. U.S. Patents: No. 5,513,514 No. 5,685,191 No. 5,642,642 No. 5,511,407 No. 5,619,885 The removable lever and push-in stopper pin provide speed and safety without sacrificing machine capacity. Sectionalized punches can be snapped in and out from the front. Increases the ease of stage bending. Unit features front & rear clamping. Features of Amada Tooling High Precision AMADA tooling is hardened and ground to give you optimal press brake performance with all critical tolerances ground to within " (.02 mm). Amada precision performance helps eliminate secondary handling to correct errors while also helping to decrease bending costs. In addition, Amada tooling is through-hardened, providing you with long lasting accuracy superior to conventional tooling. Standardized Amada tooling is available in Long () and Short () lengths, providing for easy, one-operator set-up. Sectionalized Amada tooling is sectionalized as follows for convenience and efficiency: Punch (Inches): = Die (Inches): = Variety of Standardized Shapes Amada tooling is available in a wide variety of shapes to meet almost any forming need. You re assured of finding the right tooling to perform your bending operation in the most precise, efficient manner. Interchangeable Amada tooling is designed for interchangeable use on all Amada press brakes

4 COMBINATION OF DIES & PUNCHES 1. 90º BENDING (27GA 11GA) 2. 90º BENDING STRAIGHT PUNCH (27GA 14GA) 3. 90º BENDING GOOSENECK (27GA 8GA) 4. 90º BENDING DOOR SASH (27GA 14GA) STANDARD DIE HOLDER STANDARD DIE HOLDER STANDARD DIE HOLDER º BENDING (9GA 3/8") 6. 90º BENDING (3/8" 1/2") 7. RADIUS BENDING (18GA 16GA) 8. RADIUS BENDING URETHANE DIE (27GA 11GA) 3 4 (.120R) (.79R) 17 (.98R) (10R) 17 (15R) 17 (17.5R) 17 (20R) 17 (25R) 17 (30R) 61 (1) 61 (2) 61 (3) 61 (4) 61 (5) 60 (1) 60 (2) 60 (3) 60 (4) 60 (5) 9. ACUTE ANGLE BENDING (27GA 14GA) 10. ACUTE ANGLE BENDING (14GA 10GA) ACUTE ANGLE BENDING 11. (10GA 6GA) 12. NARROW BOX BENDING STANDARD DIE HOLDER STANDARD PUNCH 13. HEMMING (27GA 16GA) HEMMING 14. MARK FREE BENDING (27GA 11GA) MATCHING 2-V DIES 2-V WITH DIES STANDARD PUNCH 2 "V" DIE (P17-19) 2 "V" DIE (P20-22) URETHANE SHEET CLAMP STANDARD 1"V" OR 2"V" DIE WITH RADIUS OPENING

5 88º & 90º PUNCHES TOOL EDGE STANDARD ONE TOUCH RADIUS (R) ANGLE º 30 $ $ R $ º $ TOOL EDGE STANDARD ONE TOUCH RADIUS (R) ANGLE º 30 $ $ R º 14 $ TOOL EDGE STANDARD ONE TOUCH RADIUS(R) ANGLE R SS* º 6 $ $ º 3 $ * Semi-Standard Length (Ear Type): = 31.50" (1 set) TOOLING ORDER PHONE: FAX:

6 88º & 90º NARROW RELIEF PUNCH TOOL EDGE STANDARD ONE TOUCH RADIUS(R) ANGLE º 24 $ $ º 12 $ R TOOL EDGE STANDARD ONE TOUCH RADIUS(R) ANGLE º 24 $ $ º 12 $ R º & 90º MULTI RELIEF NARROW PUNCH TOOL EDGE STANDARD ONE TOUCH RADIUS(R) ANGLE.118 R º 12 $ $ º 6 $ TOOL EDGE STANDARD ONE TOUCH RADIUS(R) ANGLE º 12 $ $ º 6 $ R

7 88º & 90º GOOSENECK PUNCHES TOOL EDGE STANDARD ONE TOUCH RADIUS(R) ANGLE º 15 $1, $ º 14 $1, R TOOL EDGE STANDARD ONE TOUCH RADIUS(R) ANGLE º 15 $ $ R º 14 $ TOOL EDGE STANDARD ONE TOUCH RADIUS(R) ANGLE º 15 $ $ º 14 $ R TOOL EDGE STANDARD ONE TOUCH RADIUS(R) ANGLE º 21 $ $ R º 14 $ TOOLING ORDER PHONE: FAX:

8 88º & 90º GOOSENECK PUNCHES TOOL EDGE STANDARD ONE TOUCH RADIUS(R) ANGLE º 21 $ $ º 14 $ R TOOL EDGE STANDARD ONE TOUCH RADIUS(R) ANGLE º 15 $ $ R º 9 $ TOOL EDGE STANDARD ONE TOUCH RADIUS(R) ANGLE º 15 $ $ º 9 $ R - 7 -

9 88º & 90º SASH PUNCHES TOOL EDGE STANDARD ONE TOUCH RADIUS(R) ANGLE º 15 $ $ º 3.7 $ R TOOL EDGE STANDARD ONE TOUCH RADIUS(R) ANGLE º 15 $ $ º 3.7 $ R TOOL EDGE STANDARD ONE TOUCH RADIUS(R) ANGLE º 9 $ $ º 5 $ R TOOL EDGE STANDARD ONE TOUCH RADIUS(R) ANGLE SS* º 9 $ $ º 5 $ * Semi-Standard Length (Ear Type): = (1 set) R TOOL EDGE STANDARD ONE TOUCH RADIUS(R) ANGLE SS* º 9 $ $ º 5 $ * Sem-Standard Length (Ear Type): = (1 set) R TOOLING ORDER PHONE: FAX:

10 ACUTE ANGLE PUNCHES TOOL EDGE STANDARD ONE TOUCH RADIUS(R) ANGLE SS* º 30 $ $ º 9 $ * Semi Standard Length (Ear Type): = (1 set) R TOOL EDGE STANDARD ONE TOUCH RADIUS(R) ANGLE º 18 $ $ º 9 $ R TOOL EDGE STANDARD ONE TOUCH ANGLE º 30 $ $ R

11 RADIUS PUNCHES TOOL EDGE STANDARD ONE TOUCH RADIUS(R) ANGLE º 30 $ $ º 30 $646.0 R TOOL STANDARD ONE TOUCH EDGE (R) $ $ $ R FLATTENING PUNCHES STANDARD ONE TOUCH $ $ $ $71.00 Mounts in #15 Punch Holder (shown on next page) Hardness HRC is TOOLING ORDER PHONE: FAX:

12 PUNCH HOLDERS & RADIUS RULERS PUNCH HOLDER STANDARD ONE TOUCH $ $ Hardness HRC is RADIUS RULERS EDGE (R) $ $63.00 Hardness HRC is Mounts on #15 Punch Holder..63 EDGE (R) $83.00 $47.00 Hardness HRC is Mounts on #15 Punch Holder. EDGE (R) $ $ Hardness HRC is Mounts on #15 Punch Holder

13 PUNCH HOLDERS & RADIUS RULERS EDGE (R) $ $ Hardness HRC is Mounts on #15 Punch Holder. EDGE (R) $ $ Hardness HRC is Mounts on #15 Punch Holder. EDGE (R) $ $ Hardness HRC is Mounts on #15 Punch Holder EDGE (R) $ $ Hardness HRC is Mounts on #15 Punch Holder. EDGE (R) $ $75.00 Hardness HRC is Mounts on #15 Punch Holder. TOOLING ORDER PHONE: FAX:

14 PUNCH HOLDERS & RADIUS RULERS EDGE (R) $ $ Hardness HRC is Mounts on #15 Punch Holder EDGE (R) $ $98.00 Hardness HRC is Mounts on #15 Punch Holder EDGE (R) $ $ Hardness HRC is Mounts on #15 Punch Holder EDGE (R) $ $ Hardness HRC is Mounts on #15 Punch Holder

15 QUICK CHANGE 2 "V" DIES TOOL º 18 $ $ º 18 $ TOOL º 21 $ $ º 21 $ TOOL º 21 $ $ º 21 $ TOOL º 30 $ $ º 30 $ TOOLING ORDER PHONE: FAX:

16 QUICK CHANGE 2 "V" DIES.295 TOOL º 30 $ $ º 30 $ TOOL º 30 $ $ º 30 $ TOOL º 24 $ $ º 24 $ Die has larger shoulder radius for reduced die marks..551 TOOL º 30 $ $ º 30 $ Die has larger shoulder radius for reduced die marks

17 QUICK CHANGE ACUTE ANGLE 2 "V" DIE TOOL º 6 $ $ º 6 $ TOOLING ORDER PHONE: FAX:

18 88º & 90º 2 "V" DIES º 18 $ $ º 21 $ $ º 24 $ $ º 30 $ $

19 88º & 90º 2 "V" DIES º 30 $ $ º 30 $ $ º 30 $ $ º 21 $ $ TOOLING ORDER PHONE: FAX:

20 88º & 90º 2 "V" DIES º 21 $ $ º 24 $ $ Die has larger shoulder radius for reduced die marks º 30 $ $ Die has larger shoulder radius for reduced die marks. ACUTE ANGLE 2 "V" DIE º 9 $ $

21 88º & 90º 2 "V" DIES º 18 $ Sectionalized match to die # º 21 $ Sectionalized match to die # º 21 $ Sectionalized match to die # º 30 $ Sectionalized match to die #125. TOOLING ORDER PHONE: FAX:

22 88º & 90º 2 "V" DIES º 30 $ Sectionalized match to die # º 30 $ Sectionalized match to die # º 30 $ Sectionalized match to die # º 24 $ Sectionalized match to die #311. Die has larger shoulder radius for reduced die marks

23 88º & 90º 2 "V" DIES º 30 $ Sectionalized match to die #314. Die has larger shoulder radius for reduced die marks. LOW PROFILE 2 "V" DIES º 21 $ º 21 $ ACUTE ANGLE 2 "V" DIES º 9 $ TOOLING ORDER PHONE: FAX:

24 DIE RAIL & HOLDERS DIE RAIL $ $ Hardness HRC is HOLDERS $ $ Hardness HRC is $ $ Hardness HRC is $ $ Hardness HRC is

25 88º & 90º SASH 1 "V" DIES º 29 $ $ º 29 $ $ º 29 $ $ º 29 $ $ º 30 $ $ º 30 $ $ º 30 $ $ TOOLING ORDER PHONE: FAX:

26 RAIL TYPE SASH 1 "V" DIES º 29 $ $ º 29 $ º 29 $ $ º 29 $ º 29 $ $ º 29 $ º 29 $ $ º 29 $

27 RAIL TYPE SASH 1 "V" DIES º 29 $ $ º 29 $ º 29 $ $ º 29 $ º 29 $ $ º 29 $ TOOLING ORDER PHONE: FAX:

28 ACUTE ANGLE 1 "V" DIES º 5.2 $ $ º 5.2 $1, º 4.9 $ $ º 4.9 $1, º 5.5 $ $ º 5.5 $1, º 6.4 $ $ º 6.4 $1,

29 ACUTE ANGLE 1 "V" DIES º 7.0 $1, $ º 7.0 $1, º 8.2 $1, $ º 8.2 $1, º 9.4 $1, $ º 9.4 $1, TOOLING ORDER PHONE: FAX:

30 SASH 1 'V" DIE RAIL & HOLDERS DIE RAIL $ Hardness HRC is HOLDERS $ $ Hardness HRC is $ Hardness HRC is LARGE "V" DIE HOLDER $ $ Hardness HRC is

31 LARGE "V" DIES º 24 $ $ Hardness HRC is Mounts on #50008 Die Holder º 18 $ $ Hardness HRC is Mounts on #50008 Die Holder º 12 $ $ Hardness HRC is Mounts on #50008 Die Holder. TOOLING ORDER PHONE: FAX:

32 LARGE "V" DIES º 21 $ $ Hardness HRC is Mounts on #50008 Die Holder º 30 $ $ Hardness HRC is Mounts on #50008 Die Holder º 30 $ $ Hardness HRC is Mounts on #50008 Die Holder º 30 $ $ Hardness HRC is Mounts on #50008 Die Holder. 31

33 LARGE "V" DIES º 30 $ $ Hardness HRC is Mounts on #50008 Die Holder º 30 $ $ Hardness HRC is Mounts on #50008 Die Holder º 30 $1, $ Hardness HRC is Mounts on #50008 Die Holder Hardness HRC is º 30 $1, $ TOOLING ORDER PHONE: FAX:

34 LARGE "V" DIES R $ $ Hardness HRC is Mounts on #50008 Die Holder. FLATTENING DIES $ $ Hardness HRC is Mounts on #50008 Die Holder $ $ Hardness HRC is

35 POLYURETHANE DIES & DIE HOLDERS Holders.984 HEIGHT (H) 60 (1) $ $ Hardness HRC is Mounts on #50008 Die Holder HEIGHT (H) 60 (2) " $ $ Hardness HRC is Mounts on #50008 Die Holder HEIGHT (H) 60 (3) " $1, $ Hardness HRC is Mounts on #50008 Die Holder HEIGHT (H) 60 (4) " 1, $ (5) " $1, $1, Hardness HRC is Mounts on #50008 Die Holder. TOOLING ORDER PHONE: FAX:

36 POLYURETHANE DIES & DIE HOLDER Dies TOOL A B A 61 (1) RED*.984".984" $47.00 $ BLUE**.984".984" $64.00 $34.00 B 61 (2) 61 (3) RED* " " $56.00 $ BLUE** " " $68.00 $ RED* 1.969" 1.969" $ $ BLUE** 1.969" 1.969" $ $ TOOL A B A 61 (4) RED* 3.150" " $ $ BLUE** 3.150" " $ $ B 61 (5) RED* 4.330" 1.772" $ $ BLUE** 4.330" 1.772" $ $ STANDARD OFFSET TOOLS *80 Shore "A" scale hardness **90 Shore "A" scale hardness WIDTH (A) MAX MATERIAL (CRS) (4835mm) " GA $1, " GA $1, " GA $1, A " GA $1, " GA $1, A " GA $1, " GA $1, Hardness HRC is Tolerances after bending, using the above offset tools = +/ Specify standard or One Touch style

37 HEMMING PUNCH & DIES PUNCH TOOL EDGE STANDARD ONE TOUCH EDGE (R) ANGLE R * º 30 $ $ º 30 $ R *Semi-Standard Lenghth (Ear Type): = 31.50" (1 set) DIE ASSEMBLY.63 A R.039 MAX MATERIAL GA CRS 18 GA SS.315" GA CRS 20 GA SS.236" A 20 $1, $ $1, $ REPLACEMENT DIE BLOCK.63 A A R R " 20 $ $ R " 20 $ $ TOOLING ORDER PHONE: FAX:

38 ASTRO ROBOTIC TOOLING PUNCH ANGLE (LONG) (SHORT) º $1, $ $1, HINGED EAR SECTIONS FOR ABOVE PUNCH DESCRIPTION R HINGED EAR SECTIONS $2, º DESCRIPTION V (Z) (LONG) (SHORT) DIE " 90º $1, $ $1, Z V " 88º $1, $ $1, " 90º $1, $ $1, " 88º $1, $ $1, " 90º $1, $ $1, " 88º $1, $ $1, " 90º $1, $ $1, " 88º $1, $ $1, " 90º $1, $ $1, " 88º $1, $ $1, " 90º $1, $ $1, " 88º $1, $ $1, DIE HOLDER DESCRIPTION (LONG) (SHORT) ASTRO DIE HOLDER $ $ _

39 ONE TOUCH HOLDERS & ACCESSORIES ONE TOUCH PUNCH HOLDER $ Reduce tooling set-up time Increase safety with the drop-prevention feature Insure properly tightened tools every time Increase productivity of the bending process No tools required to tighten punch For use on ZII style RG model press brake and all FBD, HFB & HFE model press Brakes. Z1 STYLE ONE TOUCH PUNCH HOLDER $ All the same features and benefits as the holder shown above for the ZI style RG Model Amada press brake. Will also mount to Guifil press brake and some other European design press brakes. Please consult your Tooling Product Specialist or the Tooling Order Desk to check compatibility. NARROW DISTANCE PIECE SET $ These narrow punch holders replace the standard One Touch punch holder when the standard size of punch holder interferes with the part being formed. These allow clearance for side flanges that would normally hit the standard punch holder, while holding the punch securely during use. Set contains widths of 25mm, 35mm,40mm and 50mm. TOOLING ORDER PHONE: FAX:

40 PRESS BRAKE ACCESSORIES DEEP PUNCH HOLDER 7.784" (200 mm) $ Hardness HRC is Specify standard or One Touch style. QUICK SET DIE HOLDER Lock or unlock a full bed-length of die with one twist of a handle. Modular design allows multiple die holders to be operated by one handle. Same profile as standard die holder (H=75mm) $ $ Bolts and washers/set for use with Quick-Set Die Holder $40.00 SIDE GAUGE AND ADJUSTABLE ANGLE SIDE GAUGE Side Gauge Side Gauge used to square parts with the bend line. Mounts directly on "V" die to help correctly align those small, hard to handle parts $ Adjustable Angle Side Gauge Same as Side Gauge but with a squaring arm that rotates 100 to provide "bending at an angle." $

41 PRESS BRAKE ACCESSORIES FRONT AND REAR CLAMP ASSEMBLY DESCRIPTION Clamp Assembly Set $ Clamp Plate $ Hardware Set $16.00 SLEEVED RADIUS RULER - CR 30 Sleeved Radius Ruler forms 9 different radii with one tool. Sleeves slide on to form radii from " to ". Available in long (), short () and sectionalized lengths. Mounts in any Amada press brake. LENGTH $ $ $1, Specify standard or One Touch style. HINGED EAR SECTIONS Hinged Ear Sections are used for accommodating channeled return flanges on the press brake. Available in #4, #16, #453, and #463 style punches with.008" radius. Allows for easy removal of pans and boxes with return flanges around perimeter of part. Eliminates springing open of flanges to remove part from tooling. Reduces operator fatigue and part rejects. PUNCH TYPE PER SET* #4 $1, Hinged ear drops down to release part Precision ground tooling allows hinged portion to mate with punch without leaving marks on part #16 $1, #453 $1, #463 $1, *Each set includes a left and right hinged ear section Specify standard or One Touch style. TOOLING ORDER PHONE: FAX:

42 PRESS BRAKE ACCESSORIES NARROW PUNCH HOLDER #60578 Allows greater clearance between punch holders for more flexibility. For use on Z-1 press brakes or for stacking with Z-2 style holder. #60579 Same as above, but for use on Z-2 style press brakes only. #60578 # $ $ URETHANE ROLL DESCRIPTION " thick urethane for mark-free bending for use on 16 ga. mat l and thinner. $ " thick urethane for mark-free bending for use on 16 ga. mat l and thicker. $ Both urethane rolls above are 6" wide x 100' long. MARKLESS MATERIAL PROTECTION DESCRIPTION REPLACEMENT MATERIAL (LIGHT) (12 ROLLS ) (EACH ROLL CONTAINS 25'OF MATERIAL) REPLACEMENT MATERIAL (HEAVY) (12 ROLLS ) (EACH ROLL CONTAINS 25'OF MATERIAL) $ $ PRESS BRAKE CABINET DESCRIPTION BASIC PRESS BRAKE CABINET OPTIONAL MOBILE BASE KIT (SHOWN) OPTIONAL FORK LIFT BASE MAPLE COUNTERTOP FOR CABINET RETAINER TOP W/MAT $1, $ $45.00 $ $65.00 Shown with optional mobile base kit

43 PRESS BRAKE ACCESSORIES REPLACEMENT PARTS REPLACEMENT CLAMP PLATE WITH SAFETY TONGUE DESCRIPTION Clamp Plate $27.00 REPLACEMENT "V" DIE BOLTS DESCRIPTION Set Bolt for 2V Die M8 X 25 $ Spring for 1V Die and 2V Die $ Washer for 2V Die M8 $ Set Bolt for 1V Die M8 X 30 $ Washer for 1V Die $4.00 Long size die requires 4 sets of bolts, springs and washers. Short size die requires 2 sets of bolts, springs and washers. REPLACEMENT BOLTS FOR HEMMING TOOL DESCRIPTION M8 X 55 Stripper Bolt $ Spring $4.00 TOOLING ORDER PHONE: FAX:

44 AIR BENDING FORCE CHART Die Opening Selection Formula t GAUGE 12 OR LESS 11-5/16" 3/8" - 1/2" 5/8" UP INCHES.105 OR LESS AND UP "V" SIZE 6 X t 8 X t 10 X t 12 X t The above formulas are for reference only. For more detailed information refer to the chart below. If the material thickness and inside bend radius are known, the following can be obtained from the chart below: 1. Pressure required for bending the material for 1 foot. 2. Opening of the die to be used. 3. Minimum bendable flange length. t F ir b v Material thickness (tensile strength: lbs/in 2 Tons per 1 foot Inside bend radius Minimum flange length Die opening t ir V F b TONS/FT INSIDE RADIUS OF BEND MIN. FLANGE LENGTH WIDTH OF V DIE OPENING GAUGE t DEC. THICKNESS MILD STEEL mm inches v inches b inches ir F Force required per linear foot to bend mild steel with air bend dies. (Measured in tons.) TONS/FT

45 R TOOLING ORDER FAX FORM FIRESTONE BLVD. BUENA PARK, CA PHONE: (800) FAX: (800) DATE: ACCOUNT : PURCHASE ORDER : MACHINE TYPE : COMPANY : COMPANY CONTACT: SHIP TO ADDRESS: CITY: STATE: ZIP: PHONE: FAX: SHIP VIA: (PLEASE CHECK ONE) UPS OVERNIGHT AM UPS OVERNIGHT UPS 2 DAYS UPS 3 DAYS UPS GROUND (5~7 DAYS) OTHER PUNCH STYLE: STANDARD ONE TOUCH SPECIAL INSTRUCTIONS: QTY CODE NO. DESCRIPTION

46 NOTES TOOLING ORDER PHONE: FAX:

47 TERMS AND CONDITIONS CREDIT/PAYMENT All purchases are COD unless credit approved. If account is past due, Amada America, Inc. reserves the right to hold shipment or require COD terms. Credit/Payment terms are Net 30 days from date of invoice. Past due accounts are subject to interest charges. No early payment or cash discounts are allowed. ORDERS Minimum of $ Please write your Amada America, Inc. customer account number on all purchase orders to speed processing. Also, please specify machine model, material type and thickness. F.O.B. All orders are F.O.B. shipping point. SPECIAL ORDERS All special orders are non-cancelable, non-returnable, and non-refundable. RETURNED MATERIAL Accepted only with prior approval of Amada America, Inc. s Tooling Department Manager. There will be a 25% re-stocking fee on all standard items. All items must be returned unused and freight prepaid. No returns will be allowed beyond 30 days of original shipment. DELIVERY Delivery on special items will be established at time of order. PURCHASE ORDER Purchase order number must accompany all telephone orders. Verbal orders will not be processed without a purchase order number. DAMAGE OR SHORTAGE CLAIMS All claims must be made within ten calendar days of receipt of tooling. PRICING All prices in this catalog are subject to change without notice. All prices provided by Amada America, Inc. in the form of a written quotation are valid for thirty days following the date of the quote.

48 R 7025 FIRESTONE BLVD BUENA PARK, CALIFORNIA (714) FAX (714) M