PRODUCT CATALOG. 2010, Halex/Scott Fetzer Company TABLE OF CONTENTS. LIQUID Liquid-Tight Conduit Fittings

Transcription

1 Electrical Metallic Tubing Fittings MC & C Cable & Flexible Metallic Conduit Fittings Non-Metallic Sheathed Cable Fittings Liquid-Tight Conduit Fittings Rigid & Intermediate Metallic Conduit Fittings Service Entrance Fittings Grounding and onding Fittings ccessories PRODUCT CTLOG

2 PRODUCT CTLOG 2010, Halex/Scott Fetzer Company INTRODUCTION Catalog Parts Numbering System... 4 Online at 5 EMT Electrical Metallic Tubing Fittings Compression Connectors and Couplings Zinc... 6 Compression Connectors and Couplings... 7 Raintight Compression Connectors and Couplings... 8 Set-Screw Connectors and Couplings Zinc... 9 Set-Screw Connectors and Couplings EMT To ox Offset Connectors Elbows Elbows Compression Elbows Set-Screw Elbows One-Hole Straps Two-Hole Straps Drive Straps EMT-To-EMT Pull Elbows EMT-To-ox Pull Elbows EMT/Rigid-To-EMT/Rigid Combo Elbows EMT/Rigid-To-ox Combo Elbows EMT-To-EMT Inside-Corner Pull Elbows EMT-To-Flex Combination Couplings EMT-To-Non-Metallic Combination Couplings EMT Insulating ushings EMT-To-Rigid Combination Couplings EMT/Rigid Combo Conduit odies EMT/Conduit odies MC & C Cable & Flexible FLEX Metallic Conduit Fittings Screw-In Connectors and Couplings Connectors nti-short ushings Squeeze Connectors FLEX-To-EMT Combination Couplings C (MC) One-Hole Straps Set-Screw Connectors Clamp-Combination Connectors Duplex Connectors Saddle Connectors C (X) Connectors MC Snap-In Connectors MC Snap-In Duplex Connectors SNP-RITE MC, C, FLEX Connectors SNP-RITE Duplex MC, C, FLEX Connectors Non-Metallic Sheathed NON-METLLIC Cable Fittings HIT LOCK Non-Metallic Cable Connectors Duplex HIT LOCK Non-Metallic Cable Connectors Plastic Non-Metallic Cable Connectors Clamp Connectors Clamp-Combination Connectors Duplex Connectors Two-Piece Clamp Connectors Water-Tight UF Connectors Saddle Connectors EMT-To-Non-Metallic Combination Couplings One-Hole Straps TLE OF CONTENTS LIQUID Liquid-Tight Conduit Fittings Liquid-Tight Connectors One-Piece Multi-Piece Liquid-Tight Connectors One-Piece Multi-Piece Liquid-Tight Connectors and/or Malleable Iron Straight /Malleable Iron Malleable Iron Malleable Iron QUICK-SET Liquid-Tight Connectors Screw-In Couplings PVC Rigid & Intermediate RIGID Metallic Conduit Fittings Compression Connectors Compression Connectors Zinc Compression Couplings Compression Couplings Zinc Set-Screw Connectors and Couplings Rigid-To-EMT Couplings Three-Piece Couplings Malleable Rigid-To-Rigid Pull Elbows EMT/Rigid-To-EMT/Rigid Combo Elbows Rigid-To-ox Pull Elbows EMT/Rigid-To-ox Combo Elbows One-Hole Straps or Malleable Iron Two-Hole Straps Conduit Locknuts Sealer Locknuts Conduit Locknuts Grounding Locknuts Reducing Washers Reducing ushings Conduit Nipples Offset Nipples Chase Nipples ox Spacers Clamp acks One-Hole Strap and Clamp Conduit ushings Plastic Insulating ushings Insulated Metallic Grounding ushings Conduit ody Gaskets Conduit ody Covers Service Entrance ELL Threaded Conduit odies with Cover and Gasket Threaded Conduit odies Rigid/EMT Combo Conduit odies Mogul Pulling Elbows Water-Tight Myers Conduit Hubs Short Radius Elbows Large Radius dapter Elbows Rigid Couplings Rigid Elbows Rigid Elbows SERVICE Service Entrance Fittings Midget One-Hole Straps One-Hole Service-Cable Straps Two-Hole Service-Cable Straps Water-Tight Connectors Service Entrance Caps Thermoplastic Service Entrance Caps Oval Service Cable Caps Non-Metallic Service Entrance Cable Hoods PVC Service Entrance Caps Slip-Fit Mast Heads Service-Cable Sill Plates Conduit Sill Plates Clamp Connectors Offset ottom Reducers Conduit Supports Service Drop rackets Fork olts Roof Ties djustable Porcelain Wireholders Porcelain Wireholders Service Clevis Service Entrance ELL Wedge Clamp Connectors Roof Flashing Duct Seals Electric Pane Washers GROUND Grounding and onding Fittings Ground Clamps For are Wire For rmored Cable With Threaded Hub With Strap and Hub Ground Rod Clamps Ground Straps Ground Screws Solid Ground Wires Stranded Ground Wires Ground Clips KENNY CLMP Compression Connectors CC ccessories Cable Staples Plastic Insulating Staples Strain Relief Cord Connectors Non-Metallic Strain Relief Cord Connectors Strain Relief Cord Connectors Split olt Connectors Split olt Connectors with Spacer ar Solderless Terminal Lugs Strut Pipe Clamp Knock Out Seals Switch ox Supports Snap-In ushings Universal Snap-In ushings Nail Plates Jack Chains and S Hooks Sky-Tie Cable Clamps and Extension Springs Duct Seals Fixture Hangers and Conduit Hangers eam Clamps INDEX...66 CROSS REFERENCE

3 INTRODUCTION TM INTRODUCTION: PRTS NUMERING 4

4 ONLINE T INTRODUCTION For the latest product information and specifications, visit us online at ONLINE FETURES INCLUDE: dedicated area for Electrical Distributors and Sales Reps Product Category View product photos and information according to category: EMT, FLEX, Non-Metallic, Liquid-Tight, Rigid, Service Entrance, Ground and ccessories. Find Part Halex Parts Enter a Halex part number to instantly get the product name, size and available link to additional details, from material, application and carton type, to Master Carton information. Search for Other Manufacturer Parts Enter a competitive part number to receive details on parts made by nine different manufacturers. What s New Connect to application/usage information on some of our latest products or technologies. Rep Locator Point and click selection by state provides immediate access to all our available rep contact information. Links Key industry Web site links are organized by industry inspection; professional contractor and electrical distributor association; codes, regulatory and standards; and other categories. Collateral Ordering Order any of our available literature and materials online at any time and on any day. To request a User ID and Password, go to and click on the Contact tab where you can submit your complete contact information and message. VISIT US ONLINE TODY. Find Part at What's New at 5

5 TM ELECTRICL METLLIC TUING FITTINGS EMT C Compression Connectors 1/2" / / /4" / / " / / /4" / / /2" /60 7.8/ " /40 7.6/ /2" " /2" " WITH INSULTED THROT 1/2" /500 5/ /4" / / " /200 4/ /4" / / /2" /60 8.3/ " /40 8.1/ /2" " /2" " PPLICTION: INDOORS Use to connect EMT conduit to steel outlet box, load center, or other metal enclosure. MTERIL:. FETURES: Concrete-Tight. CERTIFICTIONS: TO UL ND CS REQUIREMENTS. Compression Couplings 1/2" / / /4" / / " / / /4" / / /2" / / " /40 8.9/ /2" " /2" " PPLICTION: INDOORS Use to join two lengths of EMT conduit together. MTERIL: Zinc Die Cast. FETURES: Concrete-Tight. CERTIFICTIONS: TO UL ND CS REQUIREMENTS. NEW TRDE HLEX CTN/CSE CTN/CSE SIZE PRT # QTY WT (LS) Compression Couplings 2 PIECE DESIGN 1/2" /4" PPLICTION: INDOORS Use to connect EMT conduit to steel outlet box, load center, or other metal enclosure. MTERIL:. FETURES: Concrete-Tight. CERTIFICTIONS: TO UL ND CS REQUIREMENTS. 6

6 TRDE HLEX CTN/CSE CTN/CSE SIZE PRT # QTY WT (LS) Compression Connectors 1/2" / /28 3/4" / /49.2 1" / / /4" /2" " /2" " /2" " WITH INSULTED THROT 1/2" / /28 3/4" / /49.2 1" / / /4" /2" " /2" " /2" " PPLICTION: INDOORS Use to connect EMT conduit to steel outlet box, load center, or other metal enclosure. MTERIL:, Zinc Electro-Plate. FETURES: Concrete-Tight. CERTIFICTIONS: TO UL ND CS REQUIREMENTS. EMT TRDE HLEX CTN/CSE CTN/CSE SIZE. PRT # QTY WT (LS) Compression Couplings 1/2" / /31.5 3/4" / /54.2 1" / /29 1 1/4" /2" " /2" " /2" " PPLICTION: INDOORS Use to join two lengths of EMT conduit together. MTERIL:, Zinc Electro-Plate. FETURES: Concrete-Tight. CERTIFICTIONS: TO UL ND CS REQUIREMENTS 7

7 TM ELECTRICL METLLIC TUING FITTINGS EMT C Raintight Compression Connectors 1/ / / / / / / / / C CROSS (CORNERS ( WITH INSULTED THROT 1/ / / / / / /75 3.5/ / / / / PPLICTION: INDOORS OR OUTDOORS Use to connect EMT conduit to steel outlet box, load center, or other metal enclosure in a dry or wet location. MTERIL:, Zinc Electro-Plate. FETURES: Concrete-Tight and Raintight. CERTIFICTIONS: TO UL ND CS REQUIREMENTS. Raintight Compression Couplings 1/ / / / / / / / / PPLICTION: INDOORS OR OUTDOORS Use to connect two lengths of EMT conduit together in a dry or wet location. MTERIL:, Zinc Electro-Plate. FETURES: Concrete-Tight and Raintight. CERTIFICTIONS: TO UL ND CS REQUIREMENTS. 8

8 TRDE HLEX CTN/CSE CTN/CSE ( IN INCHES) Set-Screw Connectors 1/ / / / / / /200 3/ / / / / /60 6/ /40 5.4/ / / WITH INSULTED THROT 1/ / / / / / /200 3/ / / / / /60 6/ /40 5.4/ / / PPLICTION: INDOORS ONLY Use to connect EMT conduit to steel outlet box, load center, or other metal enclosure. MTERIL:. FETURES: Concrete-Tight 1/2-3/4, Concrete- Tight When Taped 1-4. CERTIFICTIONS: TO UL ND CS REQUIREMENTS. EMT Set-Screw Couplings 1/ / / / / / / / / / / / /60 5.9/ /20 2.9/ / / PPLICTION: INDOORS ONLY Use to join two lengths of EMT conduit together. MTERIL:. FETURES: Concrete-Tight 1/2-1, Concrete-Tight When Taped 1 1/4-4. CERTIFICTIONS: TO UL ND CS REQUIREMENTS. 9

9 TM ELECTRICL METLLIC TUING FITTINGS EMT Image shown is for 1/2" - 2". 2 1/2" - 4" has two screws. TRDE HLEX CTN/CSE CTN/CSE SIZE PRT # QTY WT (LS) Set-Screw Connectors 1/ / /40.4 3/ / / / / / / / / WITH INSULTED THROT 1/ / /40.4 3/ / / / / / / / / PPLICTION: INDOORS ONLY Use to connect EMT conduit to steel outlet box, load center, or other metal enclosure. MTERIL:, Zinc Electro-Plate. FETURES: Concrete-Tight When Taped. CERTIFICTIONS: TO UL ND CS REQUIREMENTS. Image shown is for 1/2" - 2". 2 1/2" - 4" has two screws. TRDE HLEX CTN/CSE CTN/CSE SIZE PRT # QTY WT (LS) Set-Screw Couplings 1/ / /42.9 3/ / / / /25 1 1/ / / / PPLICTION: INDOORS ONLY Use to join two lengths of EMT conduit together. MTERIL:, Zinc Electro-Plate, Hardened Screws. FETURES: Concrete-Tight When Taped. CERTIFICTIONS: TO UL ND CS REQUIREMENTS. 10

10 C EMT To ox Offset Connectors SET-SCREW TYPE 1/ /100 1/ / / / PPLICTION: INDOORS ONLY Use to connect EMT conduit to a metal outlet box or enclosure where an offset is desired. MTERIL:. FETURES: Concrete-Tight. CERTIFICTIONS: TO UL ND CS REQUIREMENTS. EMT C EMT To ox Offset Connectors COMPRESSION TYPE 1/ / PPLICTION: INDOORS OR OUTDOORS Use to connect EMT conduit to a metal outlet box or enclosure where an offset is desired. MTERIL:. FETURES: Concrete-Tight. CERTIFICTIONS: TO UL ND CS REQUIREMENTS. RE MINIMUM SIZE PRT # QTY WT (LS) RDII 90 Elbows 1/ / / / / / PPLICTION: INDOORS OR OUTDOORS To connect EMT conduit together to allow for 90 bends. MTERIL: Galvanized. CERTIFICTIONS: TO UL ND CS REQUIREMENTS. RE MINIMUM SIZE PRT # QTY WT (LS) RDII 45 Elbows 1/ / / / / / PPLICTION: INDOORS OR OUTDOORS To connect EMT conduit together to allow for 45 bends. MTERIL: Galvanized. CERTIFICTIONS: TO UL ND CS REQUIREMENTS. 11

11 TM ELECTRICL METLLIC TUING FITTINGS EMT C 90 Compression Elbows SHORT RDIUS 1/ / / / / / PPLICTION: INDOORS OR OUTDOORS Use to connect EMT conduit to a steel outlet box or enclosure where a close radius is desired. MTERIL:. FETURES: Concrete-Tight. CERTIFICTIONS: TO UL ND CS REQUIREMENTS. C 90 Compression Elbows LRGE RDIUS 1/ / / / / / PPLICTION: INDOORS OR OUTDOORS Use to connect EMT conduit to a steel outlet box or enclosure where a large radius 90 bend is desired. MTERIL:. FETURES: Concrete-Tight. CERTIFICTIONS: TO UL ND CS REQUIREMENTS. C 90 Set-Screw Elbows LRGE RDIUS 1/ / / / / / PPLICTION: INDOOR USE ONLY Use to connect EMT conduit to a steel outlet box or enclosure where a large radius 90 bend is desired. MTERIL:. FETURES: Concrete-Tight. CERTIFICTIONS: TO UL ND CS REQUIREMENTS. 12

12 One-Hole Straps 1/ /1000 3/ / /1000 4/ /500 3/ / /500 4/ / /250 3/ / / / / PPLICTION: INDOORS OR OUTDOORS To support EMT conduit where greater load bearing is required. MTERIL:, Zinc Electro-Plate. TYPE: Snap-On Style. CERTIFICTIONS: TO UL ND CS REQUIREMENTS. EMT C Two-Hole Straps 1/ /1000 2/ / /1000 2/ / / / / / / /250 2/ /200 7/ / / PPLICTION: INDOORS OR OUTDOORS To support EMT conduit where greater load bearing is required. MTERIL:, Zinc Electro-Plate. TYPE: Snap-On Style. CERTIFICTIONS: TO UL ND CS REQUIREMENTS. Drive Straps 1/ / / / / / / / PPLICTION: INDOORS OR OUTDOORS To secure EMT to a wood or similar surface. MTERIL:, Zinc Plate. TYPE: Flat Style. CERTIFICTIONS: TO UL ND CS REQUIREMENTS. 13

13 TM ELECTRICL METLLIC TUING FITTINGS EMT EMT-To-EMT Pull Elbows WITHOUT GSKET 1/ / WITH NEOPRENE GSKET 1/ / PPLICTION: DRY LOCTIONS Use to connect EMT conduit together at a 90 bend. MTERIL:. TYPE: Set-Screw. FETURES: Removable aluminum cover facilitates wire pulling. CERTIFICTIONS: TO UL ND CS REQUIREMENTS. EMT-To-ox Pull Elbows WITHOUT GSKET 1/ / PPLICTION: DRY LOCTIONS Use to connect EMT conduit to a metal box or enclosure to form a 90 bend. MTERIL:. TYPE: Set-Screw. FETURES: Removable aluminum cover facilitates wire pulling. Die cast locknut provided. CERTIFICTIONS: TO UL ND CS REQUIREMENTS. EMT/Rigid-To-EMT/Rigid Combo Elbows WITH NEOPRENE GSKET Zinc Die Cast 1/ GS / GS PPLICTION: INDOORS OR OUTDOORS. Use as a wire pulling elbow to facilitate wire pulling through a sharp bend in a run of EMT or threaded Rigid or IMC conduit. Removable cover provides easy access to facilitate wire pulling. Not listed for wet locations. MTERIL:. CERTIFICTIONS: TO UL ND CS REQUIREMENTS. EMT/Rigid-To-ox Combo Elbows WITH NEOPRENE GSKET 1/ GS / GS PPLICTION: INDOORS OR OUTDOORS. Use to connect a run of EMT or threaded Rigid or IMC conduit to an outlet box, or other metal enclosure. Removable cover provides easy access to facilitate wire pulling. Not listed for wet locations. MTERIL:. CERTIFICTIONS: TO UL ND CS REQUIREMENTS. EMT-To-EMT Inside-Corner Pull Elbows WITHOUT GSKET Zinc Die Cast 1/ / / PPLICTION: INDOORS ONLY Use to connect EMT conduit together on a 90 inside corner. MTERIL:. TYPE: Set-Screw. FETURES: Removable cover facilitates wire pulling. CERTIFICTIONS: TO UL ND CS REQUIREMENTS. 14

14 EMT-To-Flex Combination Couplings COMPRESSION TO SCREW-IN TYPE 1/2-1/ /500 4/ /4-3/ / / PPLICTION: INDOORS ONLY Use to join EMT conduit to flexible metallic conduit. MTE- RIL:. TYPE: Compression To Screw-In. SUITLE FOR: 1/2 steel, steel reduced wall, and aluminum flexible metal conduit to EMT, 3/4-1 flexible metal conduit to EMT. CERTIFI- CTIONS: TO UL ND CS REQUIREMENTS. SIZE PRT# QTY WT (LS) C EMT EMT-To-Flex Combination Couplings SET-SCREW TYPE 1/2-1/ / / /4-3/ / / PPLICTION: INDOORS ONLY Use to join EMT conduit to flexible metal conduit. MTERIL:. TYPE: Set-Screw. CERTIFICTIONS: TO UL ND CS REQUIREMENTS. EMT-To-Non-Metallic Combination Couplings Zinc Die Cast 1/2 -NM /500 4/ PPLICTION: INDOORS ONLY Use to join EMT conduit to non-metallic sheathed cable (1) 14-2 to (1) 10-3, (2) 14-2 to (2) MTERIL:. TYPE: Set-Screw. CERTIFICTIONS: TO UL ND CS REQUIREMENTS. EMT Insulating ushings Polyethylene 1/2" / / /4" / / " / / /4" / / /2" / / " / / PPLICTION: INDOORS ONLY Use to protect cables from abrasion from edge of EMT. MTERIL: Polyethylene. FETURES: Holds firmly in place while pulling various cables, i.e. power, cable TV, telephone/modem, alarm/security systems. Meets 2008 NEC code requirements for () protection. TRDE HLEX CTN/CSE CTN/CSE SIZE PRT # QTY WT (LS) NEW EMT-To-Rigid Combination Couplings SET-SCREW TYPE 1/2"-1/ /4"-3/ PPLICTION: INDOORS ONLY Use to join EMT conduit to Rigid metal conduit. MTERIL:, Zinc Electro-Plate. TYPE: Set-Screw. 15

15 TM ELECTRICL METLLIC TUING FITTINGS EMT C D EMT/Rigid Combo Conduit odies WITH COVER ND GSKET SSEMLED luminum TYPE LL 1/ / PPLICTION: INDOORS OR OUTDOORS Use to gain access to the interior of a raceway for wire pulling, splicing (with limitations as specified by the NEC), and maintenance. Thread port with setscrew for use with threaded or smooth pipe. Not listed for wet locations. MTERIL: Copper-Free luminum Die Cast. FETURES: Use with EMT or Rigid conduit. CERTIFICTIONS: TO UL ND CS REQUIREMENTS. C D EMT/Rigid Combo Conduit odies WITH COVER ND GSKET SSEMLED luminum TYPE C 1/ / PPLICTION: INDOORS OR OUTDOORS Use to gain access to the interior of a raceway for wire pulling, splicing (with limitations as specified by the NEC), and maintenance. Thread port with set-screw for use with threaded or smooth pipe. Not listed for wet locations. MTERIL: Copper-Free luminum Die Cast. FETURES: Use with EMT or Rigid conduit. CERTIFICTIONS: TO UL ND CS REQUIREMENTS. C D EMT/Rigid Combo Conduit odies WITH COVER ND GSKET SSEMLED luminum TYPE L 1/ / PPLICTION: INDOORS OR OUTDOORS Use to gain access to the interior of a raceway for wire pulling, splicing (with limitations as specified by the NEC), and maintenance. Thread port with set-screw for use with threaded or smooth pipe. Not listed for wet locations. MTERIL: Copper-Free luminum Die Cast. FETURES: Use with EMT or Rigid conduit. CERTIFICTIONS: TO UL ND CS REQUIREMENTS. C D EMT/Rigid Combo Conduit odies WITH COVER ND GSKET SSEMLED luminum TYPE T 1/ / PPLICTION: INDOORS OR OUTDOORS Use to gain access to the interior of a raceway for wire pulling, splicing (with limitations as specified by the NEC), and maintenance. Thread port with set-screw for use with threaded or smooth pipe. Not listed for wet locations. MTERIL: Copper-Free luminum Die Cast. FETURES: Use with EMT or Rigid conduit. CERTIFICTIONS: TO UL ND CS REQUIREMENTS. 16

16 C D EMT/Rigid Combo Conduit odies WITH COVER ND GSKET SSEMLED luminum TYPE LR 1/ / PPLICTION: INDOORS OR OUTDOORS Use to gain access to the interior of a raceway for wire pulling, splicing (with limitations as specified by the NEC), and maintenance. Thread port with set-screw for use with threaded or smooth pipe. Not listed for wet locations. MTERIL: Copper-Free luminum Die Cast. FETURES: Use with EMT or Rigid conduit. CERTIFICTIONS: TO UL ND CS REQUIREMENTS. EMT C D EMT/Conduit odies - Set-Screw WITH COVER ND GSKET SSEMLED luminum TYPE L 1/ / PPLICTION: INDOORS OR OUTDOORS Use to gain access to the interior of a raceway for wire pulling, splicing (with limitations as specified by the NEC), and maintenance. Set-screw for use with EMT smooth pipe. Not listed for wet locations. MTERIL: Copper-Free luminum Die Cast. FETURES: Use with EMT. CERTIFICTIONS: TO UL ND CS REQUIREMENTS. 17

17 TM MC & C CLE & FLEXILE METLLIC CONDUIT FITTINGS FLEX Screw-In Connectors 3/8 (1/2 ko) /500 3/ / /500 3/ / / / /250 4/ / / / / /40 3.8/ /40 6.3/ WITH INSULTED THROT 3/8 (1/2 ko) /500 3/ / /500 3/ / / / / / PPLICTION: INDOORS ONLY - Use to connect flexible metallic conduit to steel outlet box, load center or other metal enclosure. MTERIL:. MISC: 3/8 size fits 1/2 knockout (ko). SUITLE FOR: 1/2 - steel, reduced wall steel, and aluminum flexible metal conduit. 3/8, 3/4 to 1 1/4 and 2 flexible metal conduit. 1 1/2 - steel and steel reduced wall flexible metal conduit. CERTIFICTIONS: TO UL ND CS REQUIREMENTS. Screw-In Connectors SNP-IN TYPE 3/8 (1/2 ko) 04403N 50/ / / N 50/500 2/ PPLICTION: INDOORS ONLY - Use to connect flexible metallic conduit to steel outlet box, load center or other metal enclosure. MTERIL:. MISC: 3/8 size fits 1/2 knockout (ko). SUITLE FOR: 3/8 flexible metal conduit. 1/2 - steel and steel reduced wall flexible metal conduit. FETURES: New Snap-In design allows for quick and easy installation. No locknuts required. Meets UL ground fault requirements. CERTIFICTIONS: TO UL ND CS REQUIREMENTS. Screw-In Couplings 1/ /500 3/ / / / / / PPLICTION: INDOORS ONLY - Use to join two pieces of flexible metallic conduit. MTERIL:. SUITLE FOR: 1/2 - steel, steel reduced wall, and aluminum flexible metal conduit; 3/4 to 1 1/4 and 2 flexible metal conduit; 1 1/2 - steel and steel reduced wall flexible metal conduit. CERTIFICTIONS: TO UL ND CS REQUIREMENTS. 18

18 SIZE PRT # QTY WT (LS) C (MIN) (MX) C 2 1/ Connectors 3/8 (1/2 ko) / / / / / / /100 2/ /50 1.9/ / /40 5.1/ / / / WITH INSULTED THROT C 3/8 (1/2 ko) / / / / / / /100 2/ / / PPLICTION: INDOORS ONLY - In a dry location, use to connect flexible metal conduit, aluminum and steel C and MC cable to a steel outlet box or other metal enclosure. MTERIL:. MISC: 3/8 size fits 1/2 knockout. SUITLE FOR: = luminum or steel #14/2 C; 3/8 flexible metal conduit; flex cord; steel MC; aluminum MC = #14/2 C; aluminum #10-4 C; 1/2 flexible metal conduit; flex cord; steel and aluminum MC. 3/4-4 flexible metal conduit. CERTIFICTIONS: TO UL ND CS REQUIREMENTS. FLEX SIZE PRT # QTY WT (LS) (MIN) (MX) 90 Connectors SNP-IN TYPE 3/8 (1/2 ko) 11003N 50/ / / N 25/ / PPLICTION: INDOORS ONLY - In a dry location, use to connect flexible metal conduit, aluminum and steel C and MC cable to a steel outlet box or other metal enclosure. MTERIL:. MISC: 3/8 size fits 1/2 knockout. SUITLE FOR: 3/8-1/2 steel and aluminum armored cable, steel and aluminum interlocked metal clad cable, flexible cord, and flexible metal conduit. FETURES: New Snap-In design allows for quick and easy installation. No locknuts required. Meets UL ground fault requirements. CERTIFICTIONS: TO UL ND CS REQUIREMENTS. 19

19 TM MC & C CLE & FLEXILE METLLIC CONDUIT FITTINGS FLEX nti-short ushings Polyethylene FITS CLE RNGE: 14/2, 14/3, 12/2 0 (5/16 ) GS/35 PCS (5/16 ) 75400P FITS CLE RNGE: 14/4, 12/3, 6/1, 4/1 1 (3/8 ) GS/35 PCS (3/8 ) 75401P FITS CLE RNGE: 12/4, 10/2, 10/3, 2/1 2 (7/16 ) GS/35 PCS (7/16 ) 75402P (1/2 ) GS/20 PCS (1/2 ) 75403P (3/4 ) GS/16 PCS (3/4 ) 75404P PPLICTION: INDOORS ONLY - Use to protect wire within flexible metallic conduit MC and C cable. Insert one bushing at each end of conduit or cable. MTERIL: Polyethylene. CERTIFICTIONS: TO UL ND CS REQUIREMENTS. SIZE PRT # QTY WT (LS) (MIN) (MX) Squeeze Connectors SNP-IN TYPE 3/8 (1/2 ko) 04203N 50/ / / N 25/ / PPLICTION: INDOORS ONLY - In a dry location, use to connect flexible metallic conduit and steel C cable to a steel outlet box or other metal enclosure. The 3/8 can also be used with steel and aluminum MC cable. MTERIL:. MISC: 3/8 size fits 1/2 knockout (ko). SUITLE FOR: 3/8 steel flexible conduit, #14/2 wire steel armored cable,.561 steel and aluminum interlocked metal clad cable. 1/2 steel flexible metal conduit and #4-2 wire steel armored cable. FETURES: New Snap-In design allows for quick and easy installation. No locknut required. Meets UL ground fault requirements. CERTIFICTIONS: TO UL ND CS REQUIREMENTS. SIZE PRT # QTY WT (LS) (MIN) (MX) 20 Squeeze Connectors 3/8 (1/2 ko) / / / / / / / / /100 2/ / / / / /50 2/ /40 4.6/ / / WITH INSULTED THROT 1/ / / / / / /100 2/ / / / / /50 2/ /40 4.6/ PPLICTION: INDOORS ONLY - In a dry location, use to connect flexible metallic conduit and steel C cable to a steel outlet box, load center or other metal enclosure. The 3/8 can also be used with steel and aluminum MC cable. MTERIL:. MISC: 3/8 size fits 1/2 knockout. SUITLE FOR: 3/8 steel flexible conduit, #14/2 wire steel armored cable,.561 steel and aluminum interlocked metal clad cable. 1/2 steel flexible metal conduit and #4-2 wire steel armored cable. 3/4 steel flexible metal conduit and #6-3 wire steel armored cable. 1 steel and reduced wall steel flexible metal conduit and #2-2 wire steel armored cable.1 1/4-4 steel flexible metal conduit. CERTIFICTIONS: TO UL ND CS REQUIREMENTS.

20 FLEX-To-EMT Combination Couplings COMPRESSION TO SCREW-IN TYPE 1/ /500 4/ / / / PPLICTION: INDOORS ONLY - Use to join EMT conduit to flexible metallic conduit MTERIL:. TYPE: Compression to Screw-in. SUITLE FOR: 1/2 steel, steel reduced wall, and aluminum flexible metal conduit to EMT, 3/4-1 flexible metal conduit to EMT. CERTIFICTIONS: TO UL ND CS REQUIREMENTS. FLEX SIZE PRT # QTY WT (LS) (MIN) (MX) FLEX-To-EMT Combination Couplings SET-SCREW TYPE 1/2-1/ / / /4-3/ / / PPLICTION: INDOORS ONLY - Use to join EMT conduit to flexible metal conduit. MTERIL:. TYPE: Set-Screw Type. CERTIFICTIONS: TO UL ND CS REQUIREMENTS. C (MC) One-Hole Straps 3/ /1000 1/ PPLICTION: INDOORS ONLY - Use to secure C/MC cable to a wood, masonry or similar surface. MTERIL:, Zinc Electro-Plate. Set-Screw Connectors 1/ / / / / / WITH INSULTED THROT 1/ / / / / / PPLICTION: INDOORS ONLY - In a dry location, use to connect steel or aluminum flexible metallic conduit to a steel outlet box or other metal enclosure. MTERIL:. CERTIFICTIONS: TO UL ND CS REQUIREMENTS. TRDE HLEX CTN/CSE CTN/CSE (IN INCHES) SIZE PRT # QTY WT (LS) C (MIN) (MX) Clamp-Combination Connectors 3/8 (1/2 ko) /1000 6/ PPLICTION: INDOORS - In a dry location, use to connect flexible metallic conduit, C, MC, or NM cable to steel outlet box or other enclosure. MTERIL:. MISC: 3/8 size fits 1/2 knockout. SUITLE FOR: #14/2 thru 12/3 with ground NM sheathed cable, #14-2 wire steel armored cable, 3/8 steel flexible metal conduit, alum. cont. corrugated metal clad cable dia., alum. smooth sheath metal clad cable dia., alum. interlocked metal clad cable dia., rect. alum. cont. corrugated metal clad cable x 0.375, steel interlocked metal clad cable dia. CERTIFICTIONS: TO UL ND CS REQUIREMENTS. 21

21 TM MC & C CLE & FLEXILE METLLIC CONDUIT FITTINGS FLEX SIZE PRT # QTY WT (LS) C (MIN) (MX) Clamp-Combination Connectors SNP-IN TYPE 3/8 (1/2 ko) 05703N 100/ / PPLICTION: INDOORS - In a dry location, use to connect flexible metallic conduit, C, MCxand NM cable to steel outlet box or other enclosure. MTERIL:. MISC: 3/8 size fits 1/2 knockout. SUITLE FOR: #14/2 thru 12/3 with ground NM sheathed cable, #14-2 wire steel armored cable, 3/8 steel flexible metal conduit, alum. cont. corrugated metal clad cable dia., alum. smooth sheath metal clad cable dia., alum. interlocked metal clad cable dia., rect. alum. cont. corrugated metal clad cable x 0.375, steel interlocked metal clad cable dia. FETURES: New Snap-In design allows for quick and easy installation. Meets UL ground fault requirements. No locknut required. CERTIFICTIONS: TO UL ND CS REQUIREMENTS. SIZE PRT # QTY WT (LS) (MIN) (MX) Duplex Connectors 3/8 (1/2 ko) / / PPLICTION: INDOORS ONLY - In a dry location, use to connect two pieces of flexible metallic conduit, C, MC or NM sheathed cable, to a steel outlet box or other metal enclosure when using only one knockout opening. MTERIL:. MISC: 3/8 size fits 1/2 knockout. SUITLE FOR: #14-2 thru #12-3 wire with ground NM sheathed cable, #14-2 wire steel armored cable, #14-2 wire with ground thru #10-4 with ground alum. armored cable, 3/8 FMC, alum. smooth sheath metal clad cable dia., alum. interlocked metal clad cable dia., steel interlocked metal clad cable dia. CERTIFICTIONS: TO UL ND CS REQUIREMENTS. SIZE PRT # QTY WT (LS) (MIN) (MX) Duplex Connectors SNP-IN TYPE 3/8 (1/2 ko) 15803N 25/ / PPLICTION: INDOORS ONLY - In a dry location, use to connect two pieces of flexible metallic conduit, C, MC or NM sheathed cable, to a steel outlet box or other metal enclosure when using only one knockout opening. MTERIL:. MISC: 3/8 size fits 1/2 knockout. SUITLE FOR: #14-2 thru #12-3 wire with ground NM sheathed cable, #14-2 wire steel armored cable, #14-2 wire with ground thru #10-4 with ground alum. armored cable, 3/8 FMC, alum. smooth sheath metal clad cable dia., alum. interlocked metal clad cable dia., steel interlocked metal clad cable dia. FETURES: New Snap-In design allows for quick and easy installation. No locknut required. Meets UL ground fault requirements. CERTIFICTIONS: TO UL ND CS REQUIREMENTS. SIZE PRT # QTY WT (LS) (MIN) (MX) Saddle Connectors 3/8 (1/2 ko) /500 4/ INSULTED THROT 3/8 (1/2 ko) /500 4/ PPLICTION: INDOORS ONLY - In a dry location, use to connect flexible metallic conduit, C, MC and NM sheathed cable to a steel outlet box or other metal enclosure. MTERIL: Zinc Die Cast. MISC: 3/8 size fits 1/2 knockout. SUITLE FOR: #14-2 to the largest size fittable NM sheathed cable, #14-2 with ground steel and aluminum armored cable dia., 3/8 steel flexible metal conduit, alum. cont. corrugated metal clad cable dia., alum. smooth sheath metal clad cable dia., alum. interlocked metal clad cable dia., steel interlocked metal clad cable dia. CERTIFICTIONS: TO UL ND CS REQUIREMENTS. 22

22 SIZE PRT # QTY WT (LS) (MIN) (MX) Saddle Connectors SNP-IN TYPE 3/8 (1/2 ko) 06703N 50/500 3/ PPLICTION: INDOORS ONLY - In a dry location, use to connect flexible metallic conduit, C, MC and NM sheathed cable to a steel outlet box or other metal enclosure. MTERIL: Zinc Die Cast. MISC: 3/8 size fits 1/2 knockout. SUITLE FOR: #14-2 to the largest size fittable NM sheathed cable, #14-2 with ground steel and aluminum armored cable dia., 3/8 steel flexible metal conduit, alum. cont. corrugated metal clad cable dia., alum. smooth sheath metal clad cable dia., alum. interlocked metal clad cable dia., steel interlocked metal clad cable dia. FETURES: New Snap-In design allows for quick and easy installation. No locknut required. Meets UL ground fault requirements. CERTIFICTIONS: TO UL ND CS REQUIREMENTS. FLEX C C (X) Connectors 3/8 (1/2 ko) /1000 5/ PPLICTION: INDOORS ONLY - In a dry location, use to connect C (X) cable to a steel outlet box or other metal enclosure. MTERIL:. MISC: 3/8 size fits 1/2 knockout. SUITLE FOR: #14-2 steel armored cable. CERTIFICTIONS: TO UL ND CS REQUIREMENTS. SIZE PRT # QTY WT (LS) (MIN) (MX) C (X) Connectors SNP-IN TYPE 3/8 (1/2 ko) 05803N 100/ / PPLICTION: INDOORS ONLY - In a dry location, use to connect C (X) cable to a steel outlet box or other metal enclosure. MTERIL:. MISC: 3/8 size fits 1/2 knockout (ko). SUITLE FOR: #14-2 steel armored cable. FETURES: New Snap-In design allows for quick and easy installation. No locknut required. Meets UL ground fault requirements. CERTIFICTIONS: TO UL ND CS REQUIREMENTS. MC Snap-In Connectors SNP-IN TYPE 3/8 (1/2 ko) / / PPLICTION: INDOORS In a dry location, use to connect aluminum or steel C and MC cables. MTERIL:, Zinc Electro-Plate. MISC: 3/8 size fits 1/2 knockout. SUITLE FOR: luminum and steel armored cable with #14-2-#10-3 wire; steel MC cable with #14-2-#10-3 wire; aluminum MC cable with #10-3 wire. FETURES: Snap-In installation, no locknut, insulating bushing included. CERTIFICTIONS: TO UL ND CS REQUIREMENTS. TRDE HLEX CTN/CSE CTN/CSE SIZE PRT # QTY WT (LS) NEW MC Snap-In Duplex Connectors SNP-IN TYPE 3/8 (1/2 ko) /250 PPLICTION: INDOORS In a dry location, use to connect aluminum or steel C and MC cables. MTERIL:, Zinc Electro-Plate. MISC: 3/8 size fits 1/2 knockout. SUITLE FOR: luminum and steel armored cable with #14-2-#12-4 wire; steel MC cable with #14-2-#10-2 wire; aluminum MC cable with #14-2-#12-4 wire. FETURES: Snap-In installation, no locknut, insulating bushing included. CERTIFICTIONS: TO UL ND CS REQUIREMENTS. 23

23 TM MC & C CLE & FLEXILE METLLIC CONDUIT FITTINGS FLEX SNP-RITE MC, C, FLEX Connectors Zinc Die Cast 3/8 (1/2 ko) 85403N 50/ / PPLICTION: INDOORS ONLY - In a dry location, use to connect MC and C aluminum and steel cable to metal outlet boxes, electrical enclosures and other metal enclosures. MTERIL:. MISC: 3/8 size fits 1/2 knockout. SUITLE FOR: 85403N for one cable of these characteristics: C Cable: C UL US listed for aluminum and steel C cable.405 to.615 diameter. This is normally 14-2, 14-3, 14-4; 12-2, 12-3, 12-4; 10-2 and some MC Cable: UL US listed for aluminum and steel MC cable.405 to.615 diameter. This is normally 14-2, 14-3, 14-4; 12-2, 12-3, 12-4; 10-2, 10-3 and some MCI- Cable: C UL US listed for aluminum MCI- cable.400 to.500 diameter. This is normally 14-2, 14-3, 14-4; 12-2, 12-3, 12-4; 10-2 and For all of the above sizes, Hospital Grade HCF (Health Care Facilities), Home Run, Super Neutral, Fire larm and Isolated Ground cables are approved as well. FETURES: Snap-In installation, no locknut, insulating bushing included. CERTIFICTIONS: TO UL ND CS REQUIREMENTS. SNP-RITE Duplex MC, C, FLEX Connectors Zinc Die Cast 3/8 (1/2 ko) 95403N 25/ / PPLICTION: INDOORS ONLY - In a dry location, use to connect MC and C aluminum and steel cable to metal outlet boxes, electrical enclosures and other metal enclosures. MTERIL:. MISC: 3/8 size fits 1/2 knockout. SUITLE FOR: 95403N for one or two cables of these characteristics: C Cable: C UL US listed for aluminum and steel C cable.405 to.615 diameter. This is normally 14-2, 14-3, 14-4; 12-2, 12-3, 12-4; 10-2 and some MC Cable: UL US listed for aluminum and steel MC cable.405 to.615 diameter. This is normally 14-2, 14-3, 14-4; 12-2, 12-3, 12-4; 10-2, 10-3 and some MCI- Cable: C UL US listed for aluminum MCI- cable.400 to.500 diameter. This is normally 14-2, 14-3, 14-4; 12-2, 12-3,12-4; 10-2 and For all of the above sizes, Hospital Grade HCF (Health Care Facilities), Home Run, Super Neutral, Fire larm and Isolated Ground cables are approved as well. FETURES: Snap-In installation, no locknut, insulating bushing included. CERTIFICTIONS: TO UL ND CS REQUIREMENTS. 24

24 HIT LOCK Non-Metallic Cable Connectors Nylon FITS NM CLE: #14/2, #14/3, #12/2, #12/3, #10/2, #10/3 3/8 (1/2 ko) /1000.5/ FITS NM CLE: #14/3, #12/3, #10/3, #8/3, #6/3 3/ / / PPLICTION: INDOORS ONLY - In a dry location, use to connect non-metallic sheathed cable to a steel outlet box or other metal enclosure. MTERIL: Nylon. TYPE: Snap-In Style - No screws or locknuts required. MISC: 3/8 size fits 1/2 knockout. FETURES: Design allows for quick and easy two-step installation. Push into box and insert cable. CERTIFICTIONS: TO UL ND CS REQUIREMENTS. NON-METLLIC C Duplex HIT LOCK Non-Metallic Cable Connectors Nylon FITS NM CLE: 2 CLES #14/2 OR #12/2; 1 CLE #14/2 ND 1 CLE #12/2; 1 CLE #14/2 ND 1 CLE #10/2; 1 CLE #12/2 ND 1 CLE #10/2 3/8 (1/2 ko) / / PPLICTION: INDOORS ONLY - In a dry location, use to connect two non-metallic sheathed cables to a steel outlet box or other metal enclosure. MTERIL: Nylon. TYPE: Snap-In Style - No screws or locknuts required. MISC: 3/8 size fits 1/2 knockout. FETURES: Design allows for quick and easy two-step installation. Push into box and insert cable. CERTIFICTIONS: TO UL ND CS REQUIREMENTS. C Plastic Non-Metallic Cable Connectors Polypropylene FITS 1 NM CLE: #14/2-#10-3; 2 NM CLES: #14/2, #14/3, #12/2 1/ / / FITS 1 NM CLE: #6/3-#8/3; 2 NM CLES: #12/3-#8/2 3/ / / PPLICTION: INDOORS ONLY - In a dry location, use to connect non-metallic sheathed cable to a steel outlet box or other metal enclosure. MTERIL: Polypropylene. CERTIFICTIONS: TO UL ND CS REQUIREMENTS. 25

25 TM NON-METLLIC SHETHED CLE FITTINGS NON-METLLIC SIZE PRT # QTY WT (LS) (MIN) (MX) Clamp Connectors FITS NM CLE: #14/2, #12/2, #12/3, WG OR 2 #14/2 WG OR FLEX CORD.300 TO.560 INCHES DI. 3/8 (1/2 ko) /1000 5/ FITS NM CLE: 12/3-8/3 WG OR FLEX CORD.460 TO.720 INCHES DI. 3/ /500 5/ FITS NM CLE: #14/2 TO #6/3 WG OR 3#10/3 WG OR FLEX CORD.450 TO.730 INCHES DI / / FITS NM CLE: #6/3 TO #2/3 WG OR FLEX CORD.800 TO INCHES DI. OR SE CLE 3 CONDUCTOR OR 3#1/0 MIN; 3 CONDUCTOR OR 3#2/0 MX. 1 1/ / / FITS NM CLE: FLEX CORDS, MULTI FLEX CORDS; FITTING RNGE INCHES DI.SE CLES 2 CONDUCTOR 4/0 1 1/ /50 1.7/ FITS NM CLE: FLEX CORDS, MULTI FLEX CORDS; FITTING RNGE INCHES DI /40 4.5/ PPLICTION: INDOORS ONLY - In a dry location, use to connect non-metallic sheathed cable to a steel outlet box or other metal enclosure. MTERIL:. TYPE: Twin Screw. MISC: 3/8 size fits 1/2 knockout. CERTIFICTIONS: TO UL ND CS REQUIREMENTS. SIZE PRT # QTY WT (LS) (MIN) (MX) Clamp Connectors SNP-IN TYPE FITS NM CLE: #14/2, #12/2, #12/3, WG OR 2 #14/2 WG OR FLEX CORD.300 TO.560 INCHES DI. 3/8 (1/2 ko) 05103N 100/ / FITS NM CLE: 12/3-8/3 WG OR FLEX CORD.460 TO.720 INCHES DI. 3/ N 50/500 5/ PPLICTION: INDOORS ONLY - In a dry location, use to connect non-metallic sheathed cable to a steel outlet box or other metal enclosure. MTERIL:. TYPE: Twin Screw. MISC: 3/8 size fits 1/2 knockout. FETURES: New Snap-In design allows for quick and easy installation. No locknut required. CERTIFICTIONS: TO UL ND CS REQUIREMENTS. SIZE PRT # QTY WT (LS) (MIN) (MX) (MIN) Clamp Connectors 1 1/ / / / /50 1.7/ /40 4.8/ (MIN) (MX) PPLICTION: INDOORS ONLY. In a dry location, use to connect oval service cable to steel outlet box or other metal enclosure. MTERIL:. FETURES: Twin Screws. CERTIFICTION: TO UL ND CS REQUIREMENTS. 26

26 SIZE PRT # QTY WT (LS) C (MIN) (MX) Clamp-Combination Connectors 3/8 (1/2 ko) /1000 6/ PPLICTION: INDOORS - In a dry location, use to connect flexible metallic conduit, C, MC or NM cable to steel outlet box or other enclosure. MTERIL:. MISC: 3/8 size fits 1/2 knockout. SUITLE FOR: #14/2 thru 12/3 with ground NM sheathed cable, #14-2 wire steel armored cable, 3/8 steel flexible metal conduit, alum. cont. corrugated metal clad cable dia., alum. smooth sheath metal clad cable dia., alum. interlocked metal clad cable dia., rect. alum. cont. corrugated metal clad cable x 0.375, steel interlocked metal clad cable dia. CERTIFICTIONS: TO UL ND CS REQUIREMENTS. SIZE PRT # QTY WT (LS) C (MIN) (MX) NON-METLLIC C D Clamp-Combination Connectors SNP-IN TYPE 3/8 (1/2 ko) 05703N 100/ / PPLICTION: INDOORS - In a dry location, use to connect flexible metallic conduit, C, MC and NM cable to steel outlet box or other enclosure. MTERIL: Misc: 3/8 size fits 1/2 knockout. SUITLE FOR: #14/2 thru 12/3 with ground NM sheathed cable, #14-2 wire steel armored cable, 3/8 steel flexible metal conduit, alum. cont. corrugated metal clad cable dia., alum. smooth sheath metal clad cable dia., alum. interlocked metal clad cable dia., rect. alum. cont. corrugated metal clad cable x 0.375, steel interlocked metal clad cable dia. FETURES: New Snap-In design allows for quick and easy installation. Meets UL ground fault requirements. No locknut required. CERTIFICTIONS: TO UL ND CS REQUIREMENTS. TRDE HLEX CTN/CSE CTN/CSE (IN INCHES) SIZE PRT # QTY WT (LS) C D (MIN) (MX) Duplex Connectors 3/8 (1/2 ko) / / PPLICTION: INDOORS ONLY - In a dry location, use to connect two pieces of flexible metallic conduit, C, MC or NM sheathed cable, to a steel outlet box or other metal enclosure when using only one knockout opening. MTERIL:. MISC: 3/8 size fits 1/2 knockout. SUITLE FOR: #14-2 thru #12-3 wire with ground NM sheathed cable, #14-2 wire steel armored cable, #14-2 wire with ground thru #10-4 with ground alum. armored cable, 3/8 FMC, alum. smooth sheath metal clad cable dia., alum. interlocked metal clad cable dia., steel interlocked metal clad cable dia. CERTIFICTIONS: TO UL ND CS REQUIREMENTS. SIZE PRT # QTY WT (LS) C (MIN) (MX) C Duplex Connectors SNP-IN TYPE 3/8 (1/2 ko) 15803N 25/ / PPLICTION: INDOORS ONLY - In a dry location, use to connect two pieces of flexible metallic conduit, C, MC or NM sheathed cable, to a steel outlet box or other metal enclosure when using only one knockout opening. MTERIL:. MISC: 3/8 size fits 1/2 knockout. SUITLE FOR: #14-2 thru #12-3 wire with ground NM sheathed cable, #14-2 wire steel armored cable, #14-2 wire with ground thru #10-4 with ground alum. armored cable, 3/8 FMC, alum. smooth sheath metal clad cable dia., alum. interlocked metal clad cable dia., steel interlocked metal clad cable dia. FETURES: New Snap-In design allows for quick and easy installation. No locknut required. Meets UL ground fault requirements. CERTIFICTIONS: TO UL ND CS REQUIREMENTS. 27

27 TM NON-METLLIC SHETHED CLE FITTINGS NON-METLLIC NM CLE TRDE HLEX CTN/CSE CTN/CSE WIRE (IN INCHES) SIZE PRT # QTY WT (LS) RNGE Two-Piece Clamp Connectors 3/8 (1/2 ko) /1000 5/ / / / / / / / /250 4/ PPLICTION: INDOORS ONLY - In a dry location, use to secure #14 - #10 non-metallic sheathed cable to a steel outlet box or other metal enclosure. No locknut is required. MTERIL: Zinc- Plate. MISC: 3/8 size fits 1/2 knockout. TYPE: utterfly Style - does not require a locknut. TRDE HLEX CTN/CSE CTN/CSE ( IN INCHES) SIZE PRT # QTY WT (LS) C (MIN)(MX)(MIN)(MX) Water-Tight UF Connectors FITS UF CLE ONLY: #14/2, #12/2 1/ / / FITS UF CLE ONLY: #14/3-#12/3 3/ / / PPLICTION: INDOORS OR OUTDOORS. Use to secure #14 - #12 UF cable to a waterproof box with threaded hub. MTERIL:. CERTIFICTIONS: TO UL ND CS REQUIREMENTS. SIZE PRT # QTY WT (LS) C (MIN) (MX) Saddle Connectors 3/8 (1/2 ko) /500 3/30 UPC ON CRTON INSULTED THROT 3/8 (1/2 ko) /500 4/ PPLICTION: INDOORS ONLY - In a dry location, use to connect flexible metallic conduit, C, MC and NM sheathed cable to a steel outlet box or other metal enclosure. MTERIL: Zinc Die Cast. MISC: 3/8 size fits 1/2 knockout. SUITLE FOR: #14-2 to the largest size fittable NM sheathed cable, #14-2 with ground steel and aluminum armored cable dia., 3/8 steel flexible metal conduit, alum. cont. corrugated metal clad cable dia., alum. smooth sheath metal clad cable dia., alum. interlocked metal clad cable dia., steel interlocked metal clad cable dia. CERTIFICTIONS: TO UL ND CS REQUIREMENTS. C SIZE PRT # QTY WT (LS) (MIN) (MX) Saddle Connectors SNP-IN TYPE 3/8 (1/2 ko) 06703N 50/500 3/ PPLICTION: INDOORS ONLY - In a dry location, use to connect flexible metallic conduit, C, MC and NM sheathed cable to a steel outlet box or other metal enclosure. MTERIL: Zinc Die Cast. MISC: 3/8 size fits 1/2 knockout. SUITLE FOR: #14-2 to the largest size fittable NM sheathed cable, #14-2 with ground steel and aluminum armored cable dia., 3/8 steel flexible metal conduit, alum. cont. corrugated metal clad cable dia., alum. smooth sheath metal clad cable dia. alum. interlocked metal clad cable dia., steel interlocked metal clad cable dia. FETURES: New Snap-In design allows for quick and easy installation. No locknut required. Meets UL ground fault requirements. CERTIFICTIONS: TO UL ND CS REQUIREMENTS. 28

28 SIZE PRT # QTY WT (LS) (MIN) (MX) EMT-To-Non-Metallic Combination Couplings 1/2 -NM /500 4/ PPLICTION: INDOORS ONLY - Use to join EMT conduit to non-metallic sheathed cable. #14/2, #12/3, or 2 #14/2. MTERIL:. TYPE: Set-Screw Type. CERTIFICTIONS: TO UL ND CS REQUIREMENTS. C D One-Hole Straps NON-METLLIC #12/2-#14/ /1000 1/ D C PPLICTION: INDOORS ONLY - Use to secure non-metallic sheathed #12/2-#14/2 cable to a wood, masonry or similar surface. 29

29 TM LIQUID-TIGHT CONDUIT FITTINGS LIQUID C Liquid-Tight Connectors ONE-PIECE 1/ / / / / / WITH INSULTED THROT 1/ / / / / / PPLICTION: INDOORS OR OUTDOORS. Use to connect flexible metallic or type non-metallic liquid-tight conduit to a steel outlet box or other metal enclosure or hub. MTERIL:. FETURES: New one-piece design allows for quick and easy installation. Push in and twist conduit counter-clockwise until seated. Tighten screw to 35 in-lbs. and install into enclosure. It s that easy! CERTIFICTIONS: TO UL ND CS REQUIREMENTS. C Liquid-Tight Connectors MULTI-PIECE 3/8 (1/2 ko) /100 5/ / / / / / / / / / /40 2.7/ / /20 1.8/ /20 2.8/ WITH INSULTED THROT 3/8 (1/2 ko) /100 5/ / / / / / / / / / /40 2.7/ / /20 1.8/ /20 2.8/ / / PPLICTION: INDOORS OR OUTDOORS. Use to connect flexible metallic or type non-metallic liquid-tight conduit to a steel outlet box or other metal enclosure or hub. MTERIL:. MISC: 3/8 size fits 1/2 knockout. CERTIFICTIONS: TO UL ND CS REQUIREMENTS. C 90 Liquid-Tight Connectors ONE-PIECE 1/ / / / / / PPLICTION: INDOORS OR OUTDOORS. Use to connect flexible metallic or type non-metallic liquid-tight conduit to a steel outlet box or other metal enclosure or hub. MTERIL:. FETURES: New one-piece design allows for quick and easy installation. Push in and twist conduit counter-clockwise until seated. Tighten screw to 35 in-lbs. and install into enclosure. It s that easy! CERTIFICTIONS: TO UL ND CS REQUIREMENTS. 30

30 C 90 Liquid-Tight Connectors MULTI-PIECE 3/8 (1/2 ko) / / / / / / / / /50 3.3/ / /40 4.2/ / /20 2.6/ /20 3.9/ WITH INSULTED THROT 3/8 (1/2 ko) / / / / / / / / /50 3.3/ / /40 4.2/ / /20 2.6/ /20 3.9/ / / PPLICTION: INDOORS OR OUTDOORS. Use to connect flexible metallic or type non-metallic liquid-tight conduit to a steel outlet box or other metal enclosure or hub. MTERIL:. MISC: 3/8 size fits 1/2 knockout. CERTIFICTIONS: TO UL ND CS REQUIREMENTS. LIQUID C C Liquid-Tight Connectors STRIGHT /Malleable Iron 3/8 (1/2 ko) / / / / / / / / /20 2.0/ / /20 2.8/ / / / /20 2.0/ INSULTED THROT 3/8 (1/2 ko) / / / / / / / / /20 2.0/ / /20 2.8/ / / / /20 2.0/ / / PPLICTION: INDOORS OR OUTDOORS. Use to connect flexible metallic liquid-tight conduit to a steel outlet box or other metal enclosure or hub. MTERIL: /Malleable Iron (1/2 1 ; 1 1/4 2 Malleable Iron). MISC: 3/8 size fits 1/2 knockout. CERTIFICTIONS: TO UL ND CS REQUIREMENTS. 31

31 TM LIQUID-TIGHT CONDUIT FITTINGS LIQUID SIZE PRT # QTY WT (LS) C 90 Liquid-Tight Connectors Malleable Iron 3/8 (1/2 ko) / / / / / / /40 4.5/ /20 3.8/ / /20 4.8/ / /20 2.5/ /20 3.6/ C INSULTED THROT 3/8 (1/2 ko) / / / / / / /40 4.5/ /20 3.8/ / /20 4.9/ / /20 2.5/ /20 3.6/ / / PPLICTION: INDOORS OR OUTDOORS. Use to connect flexible metallic liquid-tight conduit to a steel outlet box or other metal enclosure or hub. MTERIL: Malleable Iron. MISC: 3/8 size fits 1/2 knockout. CERTIFICTIONS: TO UL ND CS REQUIREMENTS. SIZE PRT # QTY WT (LS) C 45 Liquid-Tight Connectors Malleable Iron C 3/8 (1/2 ko) / / / / / / /40 4.0/ /20 3.2/ / /20 4.4/ / /20 2.2/ /20 3.6/ INSULTED THROT 3/8 (1/2 ko) / / / / / / /40 4.0/ /20 3.2/ / /20 4.4/ / /20 2.2/ /20 3.6/ / / PPLICTION: INDOORS OR OUTDOORS. Use to connect flexible metallic liquid-tight conduit to a steel outlet box or other metal enclosure or hub. MTERIL: Malleable Iron. MISC: 3/8 size fits 1/2 knockout. CERTIFICTIONS: TO UL ND CS REQUIREMENTS. 32

32 C QUICK-SET Liquid-Tight Connectors Nylon 3/8 (1/2 ko) / / / / / / / / /50 0.6/ / / / / / / / / PPLICTION: INDOORS OR OUTDOORS. Use to connect type non-metallic liquid-tight conduit to a weatherproof outlet box, pool/spa equipment motor, central air conditioning unit or various other electrical enclosures or hubs. MTERIL: Nylon. FETURES: Fitting will not rust or corrode. No disassembly required, just insert conduit, then hand-tighten nut. Reusable. MISC: 3/8 size fits 1/2 knockout. CERTIFICTIONS: TO UL ND CS REQUIREMENTS. LIQUID C QUICK-SET 90 Liquid-Tight Connectors Nylon 3/8 (1/2 ko) / / / / / / /100 1/ /50 0.9/ / /25 0.9/ / /10 0.9/ /10 0.9/ PPLICTION: INDOORS OR OUTDOORS. Use to connect type non-metallic liquid-tight conduit to a weatherproof outlet box, pool/spa equipment motor, central air conditioning unit or various other electrical enclosures or hubs. MTERIL: Nylon. FETURES: Fitting will not rust or corrode. No disassembly required, just insert conduit, then hand-tighten nut. Reusable. MISC: 3/8 size fits 1/2 knockout. CERTIFICTIONS: TO UL ND CS REQUIREMENTS. C NEW Screw-In Couplings 1/ / PVC PPLICTION: INDOORS OR OUTDOORS. Use to connect two lengths of type non-metallic liquid-tight conduit. MTERIL: PVC. FETURES: Screw-in type. CERTIFICTIONS: TO UL ND CS REQUIREMENTS. 33

33 TM RIGID & INTERMEDITE METLLIC CONDUIT FITTINGS RIGID Compression Connectors 1/ / / / /100 5/ / / / / INSULTED THROT 2 1/ / PPLICTION: INDOORS. Use to join threadless Rigid or IMC conduit to a steel outlet box or other metal enclosure. MTERIL: Machined, Zinc electro-plate. FETURES: Concrete- Tight. CERTIFICTIONS: TO UL ND CS REQUIREMENTS. Compression Connectors 2 1/ / WITH INSULTED THROT 2 1/ / PPLICTION: INDOORS. Use to connect EMT, threadless Rigid or IMC conduit to a steel outlet box or other material enclosure. MTERIL:. FETURES: Concrete-Tight. CERTIFICTIONS: TO UL ND CS REQUIREMENTS. 34

34 Compression Couplings 1/ / / / / / RIGID PPLICTION: INDOORS. Use to join two lengths of threadless Rigid or IMC conduit. MTERIL: Machined, Zinc electro-plate. FETURES: Concrete-Tight. CERTIFICTIONS: TO UL ND CS REQUIREMENTS. Compression Couplings 2 1/ / PPLICTION: INDOORS. Use to join two lengths of EMT, threadless Rigid or IMC conduit together. MTERIL:. FETURES: Concrete-Tight. CERTIFICTIONS: TO UL ND CS REQUIREMENTS. 35

35 TM RIGID & INTERMEDITE METLLIC CONDUIT FITTINGS RIGID Image shown is for 1/2" - 2". 2 1/2" - 4" has two screws. SIZE PRT # QTY WT (LS) Set-Screw Connectors 2 1/ / WITH INSULTED THROT 2 1/ / Image shown is for 1/2" - 2". 2 1/2" - 4" has two screws. PPLICTION: INDOORS. Use to connect threadless Rigid or IMC conduit to a steel outlet box or other metal enclosure. MTERIL: Zinc Electro-Plate. MISC: 2 1/2-4 can be used for EMT conduit also. CERTIFICTIONS: TO UL ND CS REQUIREMENTS. Set-Screw Connectors 2 1/ / Image shown is for 1/2" - 2". 2 1/2" - 4" has two screws. WITH INSULTED THROT 2 1/ / PPLICTION: INDOORS. Use to connect threadless Rigid or IMC conduit to a steel outlet box or other metal enclosure. MTERIL:. MISC: 2 1/2-4 can be used for EMT conduit also. CERTIFICTIONS: TO UL ND CS REQUIREMENTS. Image shown is for 1/2" - 2". 2 1/2" - 4" has two screws. Set-Screw Couplings 2 1/ / Image shown is for 1/2" - 2". 2 1/2" - 4" has four screws. PPLICTION: INDOORS. Use to join two lengths of threadless Rigid or IMC conduit together. MTERIL:. MISC: 2 1/2-4 can be used for EMT conduit also. CERTIFICTIONS: TO UL ND CS REQUIREMENTS. Image shown is for 1/2" - 2". 2 1/2" - 4" has four screws. Set-Screw Couplings 2 1/ / Image shown is for 1/2" - 2". 2 1/2" - 4" has four screws. PPLICTION: INDOORS. Use to join two lengths of threadless Rigid or IMC conduit together. MTERIL:. MISC: 2 1/2-4 can be used for EMT conduit also. CERTIFICTIONS: TO UL ND CS REQUIREMENTS. 36

36 TRDE HLEX CTN/CSE CTN/CSE SIZE PRT # QTY WT (LS) NEW Rigid-To-EMT Couplings SET-SCREW TYPE 1/ / PPLICTION: INDOORS ONLY. Use to join EMT conduit to Rigid metal conduit. MTERIL:, Zinc Electro-Plate. TYPE: Set-screw. RIGID C C Rigid Three-Piece Couplings Malleable Iron 1/ / / / / / PPLICTION: INDOORS OR OUTDOORS. Use as a threaded coupling between lengths of threaded Rigid or IMC conduit, when neither can be rotated. MTERIL: Malleable Iron. CERTIFICTIONS: TO UL ND CS REQUIREMENTS. Rigid-To-Rigid Pull Elbows WITH NEOPRENE GSKET 1/ / / / /50 1.7/ PPLICTION: INDOORS OR OUTDOORS. Use as a wire pulling elbow to facilitate wire pulling through a sharp bend in a run of threaded Rigid or IMC conduit. Removable cover provides easy access to facilitate wire pulling. Not listed for wet locations. MTERIL:. CERTIFICTIONS: TO UL ND CS REQUIREMENTS. EMT/Rigid-To-EMT/ Rigid Combo Elbows WITH GSKET / / PPLICTION: INDOORS OR OUTDOORS. Use as a wire pulling elbow to facilitate wire pulling through a sharp bend in a run of threaded Rigid or IMC conduit. Removable cover provides easy access to facilitate wire pulling. Not listed for wet locations. MTERIL:. CERTIFICTIONS: TO UL ND CS REQUIREMENTS. 37

37 TM RIGID & INTERMEDITE METLLIC CONDUIT FITTINGS RIGID Rigid-To-ox Pull Elbows WITH GSKET 1/ / / / / / WITHOUT GSKET 1/ / PPLICTION: INDOORS OR OUTDOORS. Use to connect a run of threaded Rigid or IMC conduit to an outlet box or other metal enclosure. Removable cover provides easy access to facilitate wire pulling. Not listed for wet locations. MTERIL:. CERTIFICTIONS: TO UL ND CS REQUIREMENTS. EMT/Rigid-To-ox Combo Elbows WITH GSKET 1/ / PPLICTION: INDOORS OR OUTDOORS. Use to connect a run of threaded Rigid or IMC conduit to an outlet box or other metal enclosure. Removable cover provides easy access to facilitate wire pulling. Not listed for wet locations. MTERIL:. CERTIFICTIONS: TO UL ND CS REQUIREMENTS. 38

38 One-Hole Straps 1/ /1000 3/ / /1000 5/ / / / /500 5/ / / / / / PPLICTION: INDOORS OR OUTDOORS. Use to secure Rigid or IMC conduit to wood, masonry or similar surfaces where greater load bearing is required. MTERIL:, Zinc Electro-plate. CERTIFICTIONS: TO UL ND CS REQUIREMENTS. RIGID C C One-Hole Straps Malleable Iron 1/ / / / /500 3/ PPLICTION: INDOORS OR OUTDOORS. Use to secure Rigid or IMC conduit to wood, masonry or similar surfaces where greater load bearing is required. MTERIL: Malleable Iron. CERTIFICTIONS: TO UL ND CS REQUIREMENTS. C Two-Hole Straps 1/ /1000 2/ / /1000 3/ / / / / / / /250 3/ / / / / PPLICTION: INDOORS OR OUTDOORS. Use to secure Rigid or IMC conduit to wood, masonry or similar surfaces where greater load bearing is required. MTERIL:, Zinc Electro-plate. CERTIFICTIONS: TO UL ND CS REQUIREMENTS. TRDE HLEX CTN/CSE CTN/CSE ( IN INCHES) Conduit Locknuts 1/ /2000 2/ / /1000 1/ /1000 4/ / / / / /500 3/ / / / / /40 2.3/ /40 2.7/ PPLICTION: INDOORS OR OUTDOORS. Use to secure Rigid, IMC conduit or various threaded fittings to a steel outlet box or other metal enclosure. MTERIL: with Zinc plating. 39

39 TM RIGID & INTERMEDITE METLLIC CONDUIT FITTINGS RIGID SIZE PRT # QTY WT (LS) C D (MIN) (MX) Sealer Locknuts 1/ /500 1/ / / / /250 1/ / / / / / / / / PPLICTION: INDOORS OR OUTDOORS. Use to secure Rigid, IMC conduit or various threaded fittings to a steel outlet box or other metal enclosures, when moisture proof protection is desired. MTERIL: with Zinc plating and molded, integral PVC gasket. CERTIFICTIONS: TO UL ND CS REQUIREMENTS. C D Conduit Locknuts 1/ /2000 2/ / /1000 1/ / / / / / / /500 3/ / / / / /40 2.3/ /40 2.7/ PPLICTION: INDOORS OR OUTDOORS. Use to secure Rigid, IMC conduit or various threaded fittings to a steel outlet box or other metal enclosures. MTERIL:. FETURES: Reversible. CERTIFICTIONS: TO UL ND CS REQUIREMENTS. C Grounding Locknuts PPLICTION: INDOORS OR OUTDOORS. Use to secure Rigid or IMC threaded conduit to an unthreaded opening in a steel outlet box or other metal enclosure. MTERIL:. CERTIFICTIONS: TO UL ND CS REQUIREMENTS. 40

40 C Reducing Washers 3/4 X1/ / / X1/ /2500 5/ X3/ / /4 X1/ /4 X3/ /4 X /2 X1/ /2 X3/ /2 X /2 X1 1/ X1/ X3/ X X1 1/ X1 1/ /2 X PPLICTION: INDOORS OR OUTDOORS. Use to reduce the size of the knockout in a steel outlet box or other metal enclosure. Must use one inside the enclosure opening and one on the outside. MTERIL: Galvanized. MISC: Consult factory for availability of larger sizes. CERTIFICTIONS: TO UL ND CS REQUIREMENTS. RIGID Reducing ushings 3/4 X1/ / / X1/ /200 5/ X3/ /200 3/ /4 X1/ / / /4 X3/ /100 5/ /4 X / / /2 X1/ / / /2 X3/ /100 8/ /2 X /2 X1 1/ X1/ X3/ X X1 1/ X1 1/ /2 X1 1/ /2 X PPLICTION: DRY LOCTIONS ONLY. Use to reduce the entry size of a run of threaded conduit. MTERIL:. CERTIFICTIONS: TO UL ND CS REQUIREMENTS. 41

41 TM RIGID & INTERMEDITE METLLIC CONDUIT FITTINGS RIGID TRDE HLEX CTN/CSE CTN/CSE SIZE PRT # QTY WT (LS) Conduit Nipples 1/2 XCLOSE /2 X1 1/ /2 X /2 X /2 X /2 X /2 X /2 X /2 X /2 X /4 XCLOSE /4 X /4 X /4 X /4 X /4 X /4 X /4 X /4 X XCLOSE X X2 1/ X X X X X X X CONTINUTION OF CHRT ND IMPORTNT PPLICTION, MTERIL ND CERTIFICTION NOTES PROVIDED ON NEXT PGE 42

42 1 1/4 XCLOSE /4 X /4 X /4 X /4 X /4 X /4 X /4 X /4 X RIGID 1 1/2 XCLOSE /2 X /2 X /2 X /2 X /2 X /2 X /2 X /2 X XCLOSE X X X X X X X X /2 XCLOSE /2 X /2 X /2 X /2 X /2 X /2 X XCLOSE X X X X X X X /2 XCLOSE /2 X /2 X /2 X /2 X /2 X /2 X XCLOSE X X X X X X PPLICTION: INDOORS OR OUTDOORS. Use to connect two steel outlet boxes or other metal enclosures; use to extend a length of threaded Rigid or IMC conduit. MTERIL:, Zinc Electro-Plate. MISC: Consult factory for availability of other sizes. CERTIFICTIONS: TO UL ND CS REQUIREMENTS. 43

43 TM RIGID & INTERMEDITE METLLIC CONDUIT FITTINGS RIGID C Offset Nipples 1/ / / / / / / / / /50 1.7/ / /50 2.3/ /20 1.3/ / PPLICTION: INDOORS OR OUTDOORS. Use as an offset connector between two enclosures. Offsets the axis of the raceway by 3/4. MTERIL:. CERTIFICTIONS: TO UL ND CS REQUIREMENTS. Chase Nipples 1/ /1000 4/ / /500 3/ / / / / / / /100 5/ /40 2.3/ / /40 4.3/ /40 5.5/ / /40 6.8/ /20 3.5/ WITH INSULTED THROT 1/ /1000 4/ PPLICTION: INDOORS OR OUTDOORS. Use with a rigid coupling to terminate threaded conduit to a knockout box or enclosure, where space within the box is limited. Used with a locknut to provide a short raceway between boxes or enclosures. MTERIL:. CERTIFICTIONS: TO UL ND CS REQUIREMENTS. C ox Spacers 1/ /500 4/ / / / PPLICTION: INDOORS. Use as a raceway between two steel outlet boxes or other metal enclosures. MTERIL:. CERTIFICTIONS: TO UL ND CS REQUIREMENTS. 44 NEW Clamp acks TRDE HLEX CTN/CSE CTN/CSE SIZE PRT # QTY WT (LS) One-Hole Strap and Clamp 1 1/ Malleable Iron 1/ / / /4" / / PPLICTION: INDOORS OR OUTDOORS. Use to space conduit from mounting surface, use with malleable straps. MTERIL: Malleable Iron. Malleable Iron PPLICTION: INDOORS OR OUTDORS. Use to secure Rigid or IMC conduit to mounting surface, and to provide space between conduit and mounting surface. MTERIL: Zinc Electro- Plate. CERTIFICTIONS: TO CS REQUIREMENTS.

44 Conduit ushings 1/ /1000 3/ / /1000 5/ /500 3/ / / / / / / / / / / / / / / / / /50 4/ RIGID PPLICTION: INDOORS OR OUTDOORS. Use with locknut to terminate threaded Rigid or IMC conduit to an outlet box. The rounded surface of the bushing prevents damage to wire insulation. MTERIL:. CERTIFICTIONS: TO UL ND CS REQUIREMENTS. C Plastic Insulating ushings Thermoplastic 1/ /1000 1/ / /1000 1/ /500 1/ / / / / / / / / / / / / / / /50 1.1/ / / PPLICTION: INDOORS OR OUTDOORS. Use with locknut to terminate threaded Rigid or IMC conduit to box. Rounded surface of bushing prevents damage to wire insulation. Required by the NEC. MTERIL: High Impact Thermoplastic. FETURES: Flame-Retardant to 105 C. CERTIFICTIONS: TO UL ND CS REQUIREMENTS. C Insulated Metallic Grounding ushings (LY-IN LUG) C 1/ / / / / / / / / / / /40 3.9/ /40 5.8/ / / / /20 4.5/ PPLICTION: INDOORS OR OUTDOORS. Use with locknut to terminate service conduit to a cabinet. Lug provided for bonding jumper to a neutral bus bar. Rounded surface of bushing prevents damage to wire insulation. MTERIL:. FETURES: Thermoplastic liner rated at 150 F. CERTIFICTIONS: TO UL ND CS REQUIREMENTS. 45

45 TM RIGID & INTERMEDITE METLLIC CONDUIT FITTINGS RIGID C Conduit ody Gaskets 1/ / /4-1 1/ / / PPLICTION: INDOORS OR OUTDOORS. Use in conjunction with cover to provide a dust-tight seal to all types of metallic conduit bodies. MTERIL: Fiber for 1/2-2 and Neoprene for 2 1/2-4. C Conduit ody Covers luminum 1/ / /4-1 1/ / / PPLICTION: INDOORS OR OUTDOORS. Use to cover all styles of metallic bodies. MTERIL: Copper-Free luminum Stamping. CERTIFICTIONS: TO UL ND CS REQUIREMENTS. C Service Entrance ELL luminum 1/ / / / LL SIZES INCLUDE COVER ND GSKET. PPLICTION: INDOORS OR OUTDOORS. Use to gain access to the interior of a raceway or wire pulling, inspections, and maintenance. Mounts flush against structure. UL listed for wet locations. MTERIL: Copper-Free Die Cast luminum. CERTIFICTIONS: TO UL ND CS REQUIREMENTS. 46

46 TRDE HLEX CTN/CSE CTN/CSE (IN INCHES) C D Threaded Conduit odies WITH COVER ND GSKET luminum TYPE: L 1/ / / / / / TYPE: T 1/ / / / / / TYPE: LR 1/ / / / / / TYPE: LL 1/ / / / / / RIGID TYPE: C 1/ / / / / / PPLICTION: INDOORS OR OUTDOORS. Use to gain access to the interior of a raceway for wire pulling, splicing (with limitations as specified by the NEC), and maintenance. Not listed for wet locations. MTERIL: Copper-Free Die-Cast luminum, luminum Stamped Cover and Neoprene Gasket. CERTIFICTIONS: TO UL ND CS REQUIREMENTS. 47

47 TM RIGID & INTERMEDITE METLLIC CONDUIT FITTINGS RIGID C D Threaded Conduit odies luminum COVER & GSKET SOLD SEPRTELY TYPE: L 1/ / / / /50 3.8/ /25 2.9/ / /10 2.6/ / / / TYPE: T 1/ / / / /50 4.8/ /25 3.5/ TYPE: C 1/ / / PPLICTION: INDOORS OR OUTDOORS. Use to gain access to the interior of a raceway for wire pulling, splicing (with limitations as specified by the NEC), and maintenance. Not listed for wet locations. MTERIL: Copper-Free Die-Cast luminum. CERTIFICTIONS: TO UL ND CS REQUIREMENTS. C D RIGID/EMT Combo Conduit odies luminum WITH COVER ND GSKET TYPE: LR 1/ / TYPE: LL 1/ / TYPE: C 1/ / TYPE: L 1/ / TYPE: T 1/ / PPLICTION: INDOORS OR OUTDOORS. Use to gain access to the interior of a raceway for wire pulling, splicing (with limitations as specified by the NEC), and maintenance. Not listed for wet locations. MTERIL: Copper-Free Die-Cast luminum. MISC: Can be used with either Rigid, IMC or EMT conduit. CERTIFICTIONS: TO UL ND CS REQUIREMENTS. 48

48 C C Mogul Pulling Elbows - Type L luminum 1 1/ / RIGID PPLICTION: INDOORS OR OUTDOORS. Use to gain access to the interior of a raceway for wire pulling, splicing (with limitations as specified by the NEC), and maintenance. Not listed for wet locations. MTERIL: Copper-Free Die-Cast luminum. MISC: llows larger access to inside of raceway for easier wire pulling. CERTIFICTIONS: TO UL ND CS REQUIREMENTS. Water-Tight Myers Conduit Hubs WITH INSULTED THROT 1/ / / / / / PPLICTION: INDOORS OR OUTDOORS. Use to connect Rigid or IMC conduit to a load center or other metal enclosure where a water-tight joint is required at knockouts or slip-fit holes. MTERIL:. FETURES: Flame Retardant Insulated Throat. Rain, Oil and dust tight. Oversize locknut assures vibration-proof installation and positive grounding. CERTIFICTIONS: TO UL ND CS REQUIREMENTS. 90 Short Radius Elbows 1/ / PPLICTION: INDOORS OR OUTDOORS. Use to connect Rigid or IMC conduit to an outlet box where a close radius is desired. MTERIL:. CERTIFICTIONS: TO UL ND CS REQUIREMENTS. C 90 Large Radius dapter Elbows 1/ / PPLICTION: INDOORS OR OUTDOORS. Use to connect Rigid or IMC conduit to an outlet box where a large radius is desired. Use to convert any standard straight fitting to a 90 fitting. MTERIL:. FETURES: Exceptional wire pulling ability. CERTIFICTIONS: TO UL ND CS REQUIREMENTS. 49

49 TM RIGID & INTERMEDITE METLLIC CONDUIT FITTINGS RIGID Rigid Couplings 1/ / / / / / PPLICTION: INDOORS OR OUTDOORS. Use to join threaded Rigid or IMC conduit together. MTERIL: Galvanized. CERTIFICTIONS: TO UL ND CS REQUIREMENTS. SIZE PRT # QTY WT (LS) UL RDIUS 90 Rigid Elbows 1/ / / / / / PPLICTION: INDOORS OR OUTDOORS. Use to allow a 90 change of direction in a run of Rigid or IMC conduit. MTERIL: Galvanized. CERTIFICTIONS: TO UL ND CS REQUIREMENTS. SIZE PRT # QTY WT (LS) UL RDIUS 45 Rigid Elbows 1/ / / / / / PPLICTION: INDOORS OR OUTDOORS. Use to allow a 45 change of direction in a run of Rigid or IMC conduit. MTERIL: Galvanized. CERTIFICTIONS: TO UL ND CS REQUIREMENTS. 50

50 Midget One-Hole Straps 3/16 O.D GS OF 50 PCS /4 O.D GS OF 50 PCS PPLICTION: INDOORS OR OUTDOORS. Use to secure bare solid copper wire to a working surface. MTERIL:, Zinc Electro-Plate. C D SERVICE D C One-Hole Service-Cable Straps FITS NM CLE #12/2-#14/ /1000 1/ FITS SE ND SEU CLE 3#8-3# /1000 2/ #3-3# /1000 2/ #1-3#2/ / / #3/0-3#4/ /250 2/ PPLICTION: INDOORS OR OUTDOORS. Use to secure service entrance cable (SEU, SE) to a wood, masonry or similar surface. MTERIL:, Zinc Electro-Plate. C D Two-Hole Service-Cable Straps D C FITS SE ND SEU CLE 3#8-3# /1000 3/ #3-3# /1000 3/ #1-3#2/ /250 1/ #3/0-3#4/ /250 1/ PPLICTION: INDOORS OR OUTDOORS. Use to secure service entrance cable (SEU, SER) to a wood, masonry or similar surface. MTERIL:, Zinc Electro-Plate. SIZE PRT # QTY WT (LS) C (MIN)(MX)(MIN)(MX) Water-Tight Connectors COMPRESSION TYPE (KO/CLE SIZE) 1 / 3# / 3# /100 4/ /4 / 3# /100 5/ /4 / 3# /100 5/ /4 / 3# /2 /3#1/ /50 3/ /2 /3#2/ / 3#2/ /50 4/ / 3#4/ /50 4/ / 3#4/ /50 4/ FITS UF CLE ONLY: #14/2, #12/2 1/ / / FITS UF CLE: #12/2, #12/3 3/ / / PPLICTION: INDOORS OR OUTDOORS. Use to secure SE/SEU cable to a metal enclosure. Use to connect UF cable to a waterproof box with a threaded hub or thru-hole (ko). MTERIL:. PURPOSE: For SE/SEU Flat Style cable; 2 insulated conductors, 1 bare. CERTIFICTIONS: TO UL ND CS REQUIREMENTS. 51

51 TM SERVICE ENTRNCE FITTINGS SERVICE C Service Entrance Caps luminum CLMP ON TYPE 1/ / / /25 3/ / / / PPLICTION: INDOORS OR OUTDOORS. Use in an overhead service entrance. Mounts on top of EMT, Rigid, or IMC conduit. Serves as a connecting point for the service entrance wires. MTERIL: Copper-Free Die-Cast luminum. FETURES: Clamp-On Style. CERTIFICTIONS: TO UL ND CS REQUIREMENTS. C Thermoplastic Service Entrance Caps PVC 3# #1/0-2/ #3/0-4/ PPLICTION: INDOORS OR OUTDOORS. Use in overhead services that utilize SEU cable. MTERIL: Rigid PVC. TYPE: With Galvanized Mounting Strap and ack Plate. CERTIFICTIONS: TO UL ND CS REQUIREMENTS. C C Oval Service Cable Caps luminum 3#8-# #1/0-4/ PPLICTION: INDOORS OR OUTDOORS. Use in overhead services that utilize SEU cable. MTERIL: Copper-Free luminum Die-Cast Type: With cast back plate. CERTIFICTIONS: TO UL ND CS REQUIREMENTS. C TRDE HLEX CTN/CSE CTN/CSE SIZE PRT # QTY WT (LS) Non-Metallic Service Entrance Cable Hoods 3# #2/0-4/ PPLICTION: OUTDOOR. To provide protection to service entrance cables. NEW TRDE HLEX CTN/CSE CTN/CSE SIZE PRT # QTY WT (LS) PVC Service Entrance Caps 3/ /4" /2" PVC PPLICTION: INDOORS OR OUTDOORS. Use in overhead service entrance. Mounts on top of PVC conduit. Serves as connecting point for service entrance wires. MTERIL: PVC. FETURES: Glue on type. CERTIFICTIONS: TO UL ND CS REQUIREMENTS. 52

52 Slip-Fit Mast Heads luminum FOR 200 MP SERVICE 2 1/ PPLICTION: INDOORS OR OUTDOORS. Use in an overhead service entrance. Mounts on top of Rigid or IMC conduit. Serves as a connecting point for the service entrance wires. MTERIL: luminum Die-Cast. CERTIFICTIONS: TO UL ND CS REQUIREMENTS. SERVICE TRDE HLEX CTN/CSE CTN/CS (IN INCHES) C C Service-Cable Sill Plates luminum WITH 2 SCREWS 3# WITH 4 SCREWS 3#1/0-2/ #3/0-4/ PPLICTION: OUTDOORS ONLY. In conjunction with sealing compound, use to protect the service entrance cable and cover the hole where it enters the dwelling. Sill plates prevent water from entering the structure. MTERIL: Copper-Free luminum Die-Cast. FETURES: With Screws and Duct Seal. TRDE HLEX CTN/CSE CTN/CS (IN INCHES) C C Conduit Sill Plates luminum WITH 2 SCREWS 1/2-3/ WITH 4 SCREWS 1 1/ / PPLICTION: OUTDOORS ONLY. In conjunction with sealing compound, use to protect EMT or service entrance cable and cover the hole where it enters the dwelling. Sill plates prevent water from entering a structure. MTERIL: Copper-Free luminum Die-Cast. FETURES: With Screws and Duct Seal. SIZE PRT # QTY WT (LS) (MIN) (MX) (MIN) (MIN) (MX) Clamp Connectors 1 1/ / / / /50 1.7/ /40 4.8/ PPLICTION: INDOORS ONLY. In a dry location, use to connect oval service cable to steel outlet box or other metal enclosure. MTERIL:. FETURES: Twin Screws. CERTIFICTION: TO UL ND CS REQUIREMENTS. 53

53 TM SERVICE ENTRNCE FITTINGS SERVICE C Offset ottom Reducers luminum SLIPFITTER PPLICTION: INDOORS OR OUTDOORS. Use to connect Rigid or IMC conduit to a metal base hub. MTERIL: luminum Die Cast. MISC: Furnished with 1 1/4 pipe nipple. CERTIFICTIONS: TO UL REQUIREMENTS. SIZE PRT # QTY WT (LS) Conduit Supports Malleable LG SCREW STYLE / PPLICTION: INDOORS OR OUTDOORS. Use to secure service entrance conduit to surface of building. MTERIL: Malleable Iron. SIZE PRT # QTY WT (LS) Conduit Supports Malleable 10 OLT, NUT & WSHER / PPLICTION: INDOORS OR OUTDOORS. Use to secure service entrance conduit to the surface of a building. MTERIL: Malleable Iron. NEW SIZE PRT # QTY WT (LS) Service Drop rackets 19/31" PPLICTION: OUTDOORS. Use to secure service entrance pipe to the house. MTERIL:Galvanized for corrosion resistance. MISC.: 10 5/8 L, 19/32 HOLE, 2 3/8 SLOT. NEW NEW TRDE HLEX CTN/CSE CTN/CSE SIZE PRT # QTY WT (LS) Fork olts 12" PPLICTION: OUTDOORS. Use to secure service entrance wires to the house. MTERIL: Galvanized for corrosion resistance. FETURES: Pre-assembled with necessary hardware. TRDE HLEX CTN/CSE CTN/CSE SIZE PRT # QTY WT (LS) Roof Ties PPLICTION: OUTDOORS. Use to secure the cable drop to the house. MTERIL: Galvanized for corrosion resistance. FETURES: Pre-assembled with necessary hardware for quick installation. 54

54 djustable Porcelain Wireholder 1 1/4-3 CONDUIT PPLICTION: INDOORS OR OUTDOORS. Use as a holding device for the incoming service entrance wires. Mounts to service entrance mast below the overhead service entrance cap. MTERIL: Porcelain and. SERVICE Porcelain Wireholder HEVY DUTY 2 1/4 LG *INCLUDES 2 1/4 LG SCREW PPLICTION: INDOORS OR OUTDOORS. Use in overhead services to secure the incoming service entrance wires. MTERIL: Porcelain and. Porcelain Wireholder MEDIUM DUTY 2 1/4 LG INCLUDES 2 1/4 LG SCREW PPLICTION: INDOORS OR OUTDOORS. Use in overhead services to secure the incoming service entrance wires. MTERIL: Porcelain and. Porcelain Wireholder LIGHT DUTY 1 11/16 LG INCLUDES 1 11/16 LG SCREW PPLICTION: INDOORS OR OUTDOORS. Use in overhead services to secure the incoming service entrance wires. MTERIL: Porcelain and. TRDE HLEX CTN/CSE CTN/CSE SIZE PRT # QTY WT (LS) NEW Service Clevis Porcelain and 3/16"x3" PPLICTION: INDOORS OR OUTDOORS. Use to dead-end service entrance drops at either end. MTERIL: Porcelain Insulator and Hot Dipped Galvanized. FETURES: 4 extension, Mounting 11/16 x 7/8. 55

55 TM SERVICE ENTRNCE FITTINGS SERVICE C Service Entrance ELL luminum 1/ / / / LL SIZES INCLUDE COVER ND GSKET. PPLICTION: INDOORS OR OUTDOORS. Use to gain access to the interior of a raceway for wire pulling, inspections, and maintenance. Mounts flush against structure. MTERIL: Copper- Free Die Cast luminum. CERTIFICTIONS: TO UL ND CS REQUIREMENTS. Wedge Clamp Connectors luminum / /0-4/ PPLICTION: INDOORS OR OUTDOORS. Use to connect a triplex overhead service entrance cable to a mounting device or building. MTERIL: luminum wedge and shell with stainless steel wire. Roof Flashing 1 1/4-1 1/ / PPLICTION: OUTDOORS. Use to prevent water leaks in overhead services where conduit mast penetrates the roof surface. Slips over conduit mast and mounts to the roof. MTERIL: Galvanized steel with Neoprene seal. C Duct Seals 1 L. SLUG L. SLUG PPLICTION: INDOORS OR OUTDOORS. Use to seal around junction boxes, flashings, and service entrance locations. FETURES: Service Temperature Range: -30 F F; Compound is pliable and noncorrosive to metals; Compound can be painted. C NEW TRDE HLEX CTN/CSE CTN/CSE SIZE PRT # QTY WT (LS) Electric Pane Washers 1 1/4"x1/4" GS 1 OF 4 PCS PPLICTION: INDOORS ONLY. Use in secure panel to a wall. MTERIL:. FETURES: Round and takes a 1/4" bolt. 56

56 SIZE PRT # QTY WT (LS) Ground Clamps for are Wire With Lay-In Lug Design FOR DIRECT URIL (STINLESS STEEL SCREWS) 3/ ronze PPLICTION: INDOORS OR OUTDOORS. Use to secure bare copper ground wire to rebar, ground rod and pipe. UL listed for direct burial and concrete. WIRE SIZE: #10-#2 WG. MTERIL: ronze with Stainless Screws. FETURES: This new JRD is extremely versatile - fits 3/8-1 Rebar, 1/2-1 pipe, 1/4-1 ground rods. Can be used for mechanically connecting 2 #8 solid wires. Use on water pipes or for direct burial - no need to stock two clamps. Lay-In Lug feature is a tremendous labor saver - no threading through holes - just lay-in ground wire and tighten screw. CERTIFICTIONS: UL LISTED FOR DIRECT URIL ND CONCRETE. SIZE PRT # QTY WT (LS) GROUND Ground Clamps for are Wire 1/ / / PPLICTION: INDOORS OR OUTDOORS. Use to secure the bare copper ground wire to a 1/2 through 1 pipe and can be used with 4, 6, 8 rebar and ground rods. WIRE SIZE: Fits #10 - #2 WG. CERTIFICTIONS: TO UL ND CS REQUIREMENTS. SIZE PRT # QTY WT (LS) Ground Clamps for are Wire ronze 1/ /250 5/ FOR DIRECT URIL (RONZE SCREWS) 1/ PPLICTION: INDOORS OR OUTDOORS. Use to secure the bare copper ground wire to a 1/2 through 1 pipe and can be used with 4, 6, 8 rebar and ground rods. WIRE SIZE: Fits #10 - #2 WG. CERTIFICTIONS: TO UL ND CS REQUIREMENTS. SIZE PRT # QTY WT (LS) Ground Clamps for are Wire ronze 1 1/ FOR DIRECT URIL (RONZE SCREWS) 1 1/ UPC ON PRODUCT PPLICTION: INDOORS OR OUTDOORS. Use to secure the bare copper ground wire to a 1 1/4-2 pipe. WIRE SIZE: Fits #10 - #2 WG. CERTIFICTIONS: TO UL ND CS REQUIREMENTS. SIZE PRT # QTY WT (LS) Ground Clamps for rmored Cable ronze 1/ GS PPLICTION: INDOORS OR OUTDOORS. Use to secure the grounding wire to a 1/2 through 1 pipe. WIRE SIZE: Fits #8 - #4 WG. FETURES: pproved for direct burial. PURPOSE: For rmored Covered Ground Wire. CERTIFICTIONS: TO UL ND CS REQUIREMENTS. SIZE PRT # QTY WT (LS) Ground Clamps for rmored Cable 1/ GS PPLICTION: INDOORS OR OUTDOORS. Use to secure rmored Covered Ground Wire to a 1/2 through 1 pipe. WIRE SIZE: Fits #8 - #6 WG. PURPOSE: For rmored Covered Ground Wire. CERTIFICTIONS: TO UL ND CS REQUIREMENTS. 57

57 TM GROUNDING ND ONDING FITTINGS GROUND SIZE PRT # QTY WT (LS) Ground Clamp with Threaded Hub ronze 1/2 HU 1/ PPLICTION: INDOORS OR OUTDOORS. Use to connect grounding conductor in rigid threaded conduit to a 1/2-1 pipe. MTERIL: ronze. WIRE SIZE: #8-#4 WG. FETURES: Hub accommodates 1/2 Rigid threaded conduit pipe. CERTIFICTIONS: TO UL ND CS REQUIREMENTS. SIZE PRT # QTY WT (LS) Ground Clamp with Strap and Hub ronze 1/2-1 1/2 HU /4 HU PPLICTION: INDOORS OR OUTDOORS. Use to connect grounding conductor in rigid threaded conduit to a 1/2-1 pipe. WIRE SIZE: #8-#4 WG. MTERIL: ronze with a 7 Copper strap and ronze hub. CERTIFICTIONS: TO UL REQUIREMENTS. C Ground Rod Clamps ronze ONE SIZE FITS LL FOR DIRECT URIL (STINLESS STEEL OLT) 1/2-3/ PPLICTION: OUTDOORS. Use to connect bare copper ground wire to a driven ground rod. MTERIL: ronze with Stainless olt. FETURES: This new SRC ground rod clamp fits all size of ground rod - 1/2, 5/8 and 3/4 and accommodates wire size #10-1/0 WG. pproved for direct burial in ground or concrete. CERTIFICTIONS: TO UL REQUIREMENTS. C Ground Rod Clamps ronze FOR DIRECT URIL (RONZE OLT) 1/ /500 3/ / /500 4/ / PPLICTION: INDOORS or OUTDOORS. Use to connect bare copper ground wire to a driven ground rod. Cannot use on Rebar. MTERIL: ronze with ronze olt. FETURES: pproved for direct burial in ground and concrete. CERTIFICTIONS: TO UL ND CS REQUIREMENTS. Ground Straps 1/ PPLICTION: INDOORS. Use to provide grounding termination points in load centers and other electrical enclosures. MTERIL: Solid copper with screw. 58

58 TRDE HLEX CTN/CSE CTN/CSE SIZE PRT # QTY WT (LS) Ground Screws (Green) # OXES OF 100 PCS 5 PPLICTION: INDOORS OR OUTDOORS. Use to ground a wiring device to a steel outlet box. TRDE HLEX CTN/CSE CTN/CSE SIZE PRT # QTY WT (LS) Solid Ground Wires #14 WG PPLICTION: INDOORS OR OUTDOORS. Use to ground the branch wire to the wall of a metal outlet box. FETURES: Captive Screw. LENGTH: 6.5. GROUND Stranded Ground Wires #12 WG GS OF 2 PCS PPLICTION: INDOORS OR OUTDOORS. Use to ground the branch wire to the wall of a metal outlet box. FETURES: Captive Screw and Clip. LENGTH: 8. TRDE HLEX CTN/CSE CTN/CSE SIZE PRT # QTY WT (LS) Ground Clips (Green) #14-# OXES OF 100 PCS 10 PPLICTION: INDOORS OR OUTDOORS. Use to connect the grounding wire to the side wall of a steel outlet box. PURPOSE: For Non-Metallic Sheathed Cable. TRDE HLEX CTN/CSE SERVICE ENTRNCE CONDUCTOR SIZES SIZE PRT # QTY COPPER CONDUCTORS LUMINUM CONDUCTORS KENNY CLMP Compression Connectors rass LL SIZES FIT 1/2 KNOCKOUT #8 STR #2 OR SMLLER #1/0 OR SMLLER #8 SOL #2 OR SMLLER #1/0 OR SMLLER #6 STR #1 TO #1/0 #2/0 OR #3/0 #6 SOL #1 TO #1/0 #2/0 OR #3/0 #4 STR #2/0 OR #3/0 #4/0 OR 250 KCMIL #4 SOL #2/0 OR #3/0 #4/0 OR 250 KCMIL #2 STR OVER #3/0-350 KCMIL OVER 250 KCMIL-500 KCMIL #1/0 STR OVER 350 KCMIL-600 KCMIL OVER 500 KCMIL- 900 KCMIL #2/0 STR OVER 600 KCMIL-1100 KCMIL OVER 900 KCMIL-1750 KCMIL #3/0 STR OVER 600 KCMIL-1100 KCMIL OVER 1750 KCMIL PPLICTION: Ensures code compliance for grounding electrode conductor installations, and is the only UL listed connector for bonding and grounding of electrode conductors in panel boards, pad mount, dry type transformers, metallic raceways and enclosures. MTERIL: rass. CERTIFICTIONS: TO UL REQUIREMENTS. 59

59 TM CCESSORIES CC C Cable Staples FOR NON-METLLIC CLE #14-2, #14-3, #12-2, # OXES OF 500 PCS #14-2, #14-3, #12-2, # OXES OF 100 PCS FOR RMORED ND NON-METLLIC CLE #14-2, #14-3, #12-2, #12-3, #10-3, 2#14-2, 2# OXES OF 500 PCS #14-2, #14-3, #12-2, #12-3, #10-3, 2#14-2, 2# OXES OF 100 PCS PPLICTION: INDOORS ONLY. Use to secure non-metallic sheathed, armored or SEU cable to wood surfaces. MTERIL:. C C Plastic Insulating Staples Plastic FITS NM CLE: # 14 - #12 ; FITS UF CLE: #14/2 - #12/2 1/2 FLT WIRE GS OF 50 PCS FITS NM CLE: # 10/2 - #8/2 ; FITS UF CLE: # 10/2 - #8/2 ; #14/3 - #12/3 3/4 FLT WIRE GS OF 50 PCS PPLICTION: INDOORS ONLY. Use to secure non-metallic sheathed or UF cable to wood surfaces. MTERIL: Plastic with Nails. C SIZE PRT # QTY WT (LS) (MIN) (MX) Strain Relief Cord Connectors 60 FITS WIRE RNGE : / FITS WIRE RNGE : / FITS WIRE RNGE : / FITS WIRE RNGE : / FITS WIRE RNGE : / FITS WIRE RNGE : / FITS WIRE RNGE : FITS WIRE RNGE: FITS WIRE RNGE : FITS WIRE RNGE PPLICTION: INDOORS ONLY. Use to connect S, SO, ST, SJ, SJO, and SJT cord to a steel outlet box or other metal enclosure. MTERIL:. TYPE: Gland Style. CERTIFICTIONS: TO UL ND CS REQUIREMENTS.

60 C Non-Metallic Strain Relief Cord Connectors FITS CORD RNGE: /1/ CC FITS CORD RNGE: / PPLICTION: INDOORS ONLY. Use to connect cord to a steel outlet box or other metal enclosure. MTERIL: PVC. TYPE: Gland Style. FETURES: Liquid-tight seal, oil-tight seal, unique grommet with gripping fingers. sealing ring and zinc locknut are provided to assure a liquid-tight seal when installing in non-threaded openings. CERTIFICTIONS: TO UL ND CS REQUIREMENTS. C 90 (Large Radius) Strain Relief Cord Connectors FITS WIRE RNGE : / FITS WIRE RNGE : / FITS WIRE RNGE : / FITS WIRE RNGE : / FITS WIRE RNGE : / FITS WIRE RNGE : / PPLICTION: INDOORS ONLY. Use to connect S, SO, ST, SJ, SJO, and SJT cord to a steel outlet box or other metal enclosure. MTERIL:. TYPE: Gland Style. FETURES: Large Radius provides minimal wire stress and easy pulling. CERTIFICTIONS: TO UL ND CS REQUIREMENTS. C Split olt Connectors ronze SOL / / / MCM * RNGE: Equal run and tap. Each wire size is listed for both solid and stranded unless specified. PPLICTION: INDOORS OR OUTDOORS. Use to connect ground wires together. For direct burial stranded unless specified and concrete. PURPOSE: For Copper and Copperweld Wires. MTERIL: Silicon ronze. TYPE: Flat Style. CERTIFICTIONS: TO UL ND CS REQUIREMENTS. 61

61 TM CCESSORIES CC C Split olt Connectors with Spacer ar FOR COPPER TO COPPER; **CN E USED ON LUMINUM CONDUCTOR, UT IS NOT UL LISTED FOR THT PPLICTION ronze FOR COPPER TO COPPER, COPPER TO LUMINUM, LUMINUM TO LUMINUM FOR COPPER TO COPPER; **CN E USED ON LUMINUM CONDUCTOR, UT IS NOT UL LISTED FOR THT PPLICTION 8-6 SOL / / / MCM STR * RNGE: Each wire size is listed for both solid and stranded unless specified.ppliction: INDOORS OR OUTDOORS. Use to connect wires together. Use oxide-inhibiting compound when connecting aluminum or CSR (aluminum conductor steel reinforced) or aluminum to copper wires. MTERIL: Silicon ronze with Electro-Tin plated bolt, nut, spacer, and pressure bar. MISC: Call factory for availability of other sizes. CERTIFICTIONS: TO UL ND CS REQUIREMENTS. C Solderless Terminal Lugs Copper #6-# N #8-# N # N #1/0-# N #4-#3/ N #2-#4/ N PPLICTION: INDOORS OR OUTDOORS. Use to connect a ground wire or wires to a metal enclosure. MTERIL: Electrolytic Copper. FETURES: One Hole, Single Collar. CERTIFICTIONS: TO UL ND CS REQUIREMENTS. NEW Strut Pipe Clamp 1/2 & 3/ PPLICTION: INDOORS OR OUTDOORS. Use this strut pipe clamp for securing 1/2 and 3/4 conduit and pipe from strut sizes 1-5/8 (41 mm) wide x minimum 13/16 (21mm) high. MTERIL:, Zinc Electro-Plate. FETURES: One clamp fits 1/2 and 3/4 trade sizes and provides a 2-1 SKU reduction. The slanted design makes installation easier and allows pipe and conduit to be tightly spaced. CERTIFICTIONS: TO UL ND CS REQUIREMENTS. 62

62 Knock Out Seals 1/ / / / / / / /1000 4/ / / / /500 1/ / / PPLICTION: INDOORS. Use to cover exposed knock-out holes in steel outlet boxes and other metal enclosures. MTERIL: ; Zinc Electro-Plate. CC C Switch ox Supports Zinc Plated PIR PPLICTION: INDOORS. Use to support attachment of an outlet box in drywall, paneling, etc., in the absence of a structure member. Installed in pairs. C Snap-In ushings Plastic 1/ / / PPLICTION: INDOORS ONLY. Use to protect non-metallic cable from damage when running cable through metal studs. MTERIL: Plastic. FETURES: Fits a round pre-punched metal stud opening. C Universal Snap-In ushings Polypropylene 72599P / / GGED ITEMS GS OF 25 PCS PPLICTION: INDOORS ONLY. Use to protect non-metallic cable from damage when running cable through metal studs. MTERIL: Polypropylene. FETURES: Fits a variety of pre-punched metal stud openings. CERTIFICTIONS: TO UL ND CS REQUIREMENTS. 63

63 TM CCESSORIES CC Nail Plates Zinc Plated 1 1/2 X 2 1/ / / /2 X PCS /2 X PCS PPLICTION: INDOORS ONLY. Use to protect internal wire runs from nail punctures, as defined in the NEC rticle MTERIL: Zinc plated steel. TRDE HLEX CTN/CSE CTN/CSE SIZE PRT # QTY WT (LS) Jack Chains 12 GUGE ' 6 10 GUGE ' 9 FETURES: Supports up to 29 lbs. MTERIL: Zinc plated steel. Zinc Plated SIZE PRT # QTY WT (LS) S Hooks Zinc Plated 12 GUGE PPLICTION: INDOORS. Use to suspend light fixtures, etc. MTERIL: Zinc plated steel. TRDE HLEX CTN/CSE CTN/CSE SIZE PRT # QTY WT (LS) Sky-Tie Cable Clamps 1/2-3/ /4-1 1/ SPECIL FETURES: Interchangeable Two-Piece Construction; Keyhole Slots - permits assembly on cable without removal of bolts or threading of cable through fitting. Supports and anchors bus-drop cable at a 90 angle. MTERIL: Stamped. TRDE HLEX CTN/CSE CTN/CSE SIZE PRT # QTY WT (LS) Extension Springs SUPPORTS LS LS SUPPORTS LS LS SUPPORTS LS LS PPLICTION: INDOORS. Use to suspend Sky-Tie cable to clamp. MTERIL:, Zinc Electro-plate. FETURES: Slips on to Sky-Tie at its outside bend and ties back to structural member. Ensures tautness of cable, absorbs vibration. 64

64 C C Duct Seal 1 L. SLUG L. SLUG CC PPLICTION: INDOORS OR OUTDOORS. Use to seal around junction boxes, flashings, and service entrance locations. FETURES: Service Temperature Range: -30 F F; Compound is pliable and noncorrosive to metals; Compound can be painted. C C Fixture Hangers FITS 3 1/4 OR 4 OCTGONL OUTLET OXES FITS 4 SQURE OUTLET OXES PPLICTION: INDOORS OR OUTDOORS. Use to secure and suspend light fixture. FETURES: Self-aligning covers provide flexible suspension, assuring plumb alignment, regardless of ceiling structure or angle. Equipped with ball joint, allows fixture to swivel through an angle of 20 in any direction. MTERIL: Stamped steel. HW TW RIGID EMT Conduit Hangers WITH NUT ND OLT TTCHED /8-1/2 1/ /4 3/ / / /4 1 1/ / /2 2 1/ /2 3 1/ PPLICTION: INDOORS OR OUTDOORS. Use to secure and suspend conduit from overhead supports. MTERIL: Zinc plated steel. CERTIFICTIONS: TO UL ND CS REQUIREMENTS. C eam Clamps C 1/ / / PPLICTION: INDOORS OR OUTDOORS. Use to secure conduit to a metal beam. Clamps on beam, girder or similar structure to provide a mounting base for attachment of a conduit hanger, either directly or by means of a threaded rod. Eliminates the need to drill a hole through the beam. C C eam Clamps Malleable Iron 1-1/ /250 5/ / PPLICTION: INDOORS OR OUTDOORS. Use to secure conduit to a metal beam. Clamps on beam, girder or similar structure to provide a mounting base for attachment of a conduit hanger, either directly or by means of a threaded rod. Eliminates the need to drill a hole through the beam. 65

65 TM INDEX INDEX Item No. Page No , , , , , , , , N N Item No. Page No N N , , , N N , , , , N 22, N , , , N 23, 28 Item No. Page No N N , , , , , , , , Item No. Page No , , , , , , N 22, Item No. Page No Item No. Page No , , , , , , , , , ,

66 Item No. Page No Item No. Page No , , , , , , Item No. Page No , , , , , , , , , Item No. Page No , , , , , , , , , , , , , 36 Item No. Page No , , , Item No. Page No INDEX 67

67 TM INDEX INDEX Item No. Page No Item No. Page No Item No. Page No P P P P P P Item No. Page No , , , , , , , , , , , , , , N Item No. Page No , , , , , Item No. Page No , , , , , N

68 HLEX ITEM RLINGTON P MDISON NEER REGL T & TOPZ RCO PECO C-H GL S LNS200G GL600D LG GL DLN1 101DC LN50 L100D 501 LN DLN2 102DC LN75 L200D 502 LN DLN3 103DC LN100 L300D 503 LN DLN4 104DC LN125 L400D 504 LG DLN5 105DC LN150 L500D 505 LN DLN6 106DC LN200 L600D 506 LN DLN7 107DC LN250 L700D 507 LN DLN8 108DC LN300 L800D 508 LN DLN9 109DC LN350 L900D 509 LN DLN10 110DC LN400 L1000D 510 LN L20 225DC 92T DC 92T DC2 L21 TC TC211SC DC DC2 L23 TC TC212SC DC DC2 L25 TC TC213SC DC DC2 L27 TC TC214SC DC DC2 L29 TC TC215SC DC DC2 L31 TC TC216SC DC DC2 L33 TC TC217SC DC DC2 L35 TC TC218SC DC DC2 L37 TC TC219SC DC DC2 L39 TC TK2110SC DC DC L22 TC TK211SC DC DC L24 TC TK212SC DC DC L26 TC TK213SC DC DC L28 TC TK214SC DC DC L30 TC TK215SC DC DC L32 TC TK216SC DC DC L34 TC TK217SC DC DC L36 TC TK218SC DC DC L38 TC TK219SC DC DC L40 TC TK2110SC DC TC DC TWL50 TC911SC TWL75 TC912SC DC2 L37-1 TN50 TO C DC2 L37-2 TN75 TO C TO211SC TO DC L40-1 RN HO DC DC L40-2 RN HO DC DC L40-3 RN HO DC DC L40-4 RN HO DC DC L40-5 RN HO DC L40-6 RN HO L42 403DC2 L42 SC XC DC 04203N 403DCS L DC2 L42-1 SC XC DC 04205N L DC2 L42-2 SC XC DC L DC2 L42-3 SC XC DC L DC2 L42-4 SC XC DC L DC2 L42-5 SC XC DC L DC2 L42-6 SC XC DC L DC2 L42-7 SC XC DC CROSS REFERENCE 69

69 TM CROSS REFERENCE CROSS REFERENCE HLEX ITEM RLINGTON P MDISON NEER REGL T & TOPZ RCO PECO C-H L DC2 L42-8 SC XC DC L DC2 L42-9 SC XC DC L DC2 L42-10 SC XC DC GF38 519DC2 L44 GC XC DC 04403N GF38ST 519DCS GF50 520DC2 L44-1 GC XC DC 04405N GF50ST 520DCS GF75 521DC2 L44-2 GC XC DC GF DC2 L44-3 GC XC DC GF DC2 L44-4 GC XC DC GF DC2 L44-5 GC XC DC GF DC2 L44-6 GC XC DC GFC50 530DC L45-1 GX XK CPL 791DC GFC75 531DC L45-2 GX XK CPL 792DC GFC DC L45-3 GX XK CPL 793DC GFC DC L45-4 GX XK CPL 794DC GFC DC L45-5 GX XK CPL 795DC GCF DC L45-6 GX XK CPL 796DC L48 507DC2 L48-1 FC XC L49 508DC2 L GF DC L49-1 EGC TX GF DC L49-2 EGC TX GF DC L49-3 EGC DC2 L51 C NC DC 05103N 841ST 650DCS DC2 L104 C NC , R N 842ST DC2 L106 C1001R 6625 NC R 2864, R DC2 L106 C1251R R R DC2 L107 C1501R R R DC2 L108 C2001R R R DC C50 Z U DC C75 Z U DC C100 Z U DC C125 Z-400 U DC C150 Z500 U DC C200 Z600 U DC C250 Z700 U DC C300 Z800 U DC C350 Z900 U DC C400 Z1000 U DC2 L-1106 C NC DC2 L-1107 C NC DC2 L-1108 C NC DC2 L57 C XC C 05703N 8400ST 565DCS DC2 L58 C XC N 845ST 845SP UF50 761UF LWC UF UF UF UF75 762UF LWC UF UF UF L16 560DC2 L67 T XC2200C N L16ST 560DCS DC L701 CNN H D DC L702 CNN H D DC L703 CNN H D DC L704 CNN H D DC L705 CNN H D DC L706 CNN H D 70

70 HLEX ITEM RLINGTON P MDISON NEER REGL T & TOPZ RCO PECO C-H DC L707 CNN H D DC L708 CNN H D DC L709 CNN H D DC L710 CNN H D WC LWC1006 WC WT CH WC LWC1004 WC WT203C DH WC LWC1253 WC WT WC LWC1252 WC WT WC1252N 764-2N LWC1252N WC1252N 6642 WT204C WC1501 LWC1501 WC WT WC LWC1502 WC WT WC LWC2002 WC WT WC LWC2004 WC WT206D 876C C WC2004N 766-4N LWC2004N WC2004N 6664 WT206E 876D C-N DC2 L110 C XC DC 11003N 850ST 801DCS DC2 L110-1 C XC DC 11005N 851ST DC2 L110-2 C XC DC DC2 L110-3 C XC DC DC2 L C XC DC DC2 L110-5 C XC DC DC2 L110-6 C XC DC DC2 L110-7 C250D 6467 XC DC DC2 L110-8 C300D 6468 XC DC L110-9 C350D 6469 XC DC L C400D 6470 XC DC DC2 L121 TC TC221SC DC DC2 L123 TC TC222SC DC DC2 L125 TC TC223SC DC DC2 L127 TC TC224SC DC DC2 L129 TC TC225SC DC DC2 L131 TC TC226SC DC DC2 L133 TC TC227SC DC DC2 L135 TC TC228SC DC DC2 L137 TC TC229SC DC DC2 L139 TC TC2210SC DC DC L122 TC TK DC DC L124 TC TK DC DC L126 TC TK DC DC L128 TC TK DC DC L130 TC TK DC DC L132 TC TK DC DC L134 TC TK DC DC L136 TC TK DC DC L138 TC TK DC DC L140 TC TK DC LR2 R R121 R R LR3 R R131 R R LR4 R R132 R R LR5 R R141 R R LR6 R R142 R R LR7 R R143 R R LR8 R R151 R R LR9 R R152 R R LR10 R R153 R R LR11 R R154 R R R R161 R R R R162 R R LR14 R R163 R R S LR15 R R164 R R LR16 R R165 R R CROSS REFERENCE 71

71 TM CROSS REFERENCE CROSS REFERENCE 72 HLEX ITEM RLINGTON P MDISON NEER REGL T & TOPZ RCO PECO C-H LR21 RWN R175 R19 R LR22 R R176 R20 R DC2 L DC2 L DC2 L TL EMT DC2 L TL EMT DC L144-1 THL TL EMT DC L144-2 THL TL202SC EMT L244-1 CPL50 TL EMT L244-2 CPL75 TL EMT DC L153 EFC TX DC S MERSS S DC L153-1 EFC TX S MERSS S DC L153-2 EFC TX DC2 L158 DC XC N 846ST 601DCS Z 1309DC L160 GC GC Z 19Z Z 1308DC L161 G Z 246DC LT38 429LT2 LQ1038 LMM LT RT-38 LT38DC LT50 430LT2 LQ1050 LMM LT RT-50 LT50DC LT75 431LT2 LQ1075 LMM LT RT-75 LT75DC LT LT2 LQ1100 LMM LT RT-100 LT100DC LT LT2 LQ1125 LMM LT RT-125 LT125DC LT LT2 LQ1150 LMM LT RT-150 LT150DC LT LT2 LQ1200 LMM LT RT-200 LT200DC WH3 153DC LWH-100 CHM100DT 403 H100SC WH-3 ST WH4 154DC LWH-125 CHM125DT 404 H125SC WH-4 ST WH5 155DC LWH-150 CHM150DT 405 H150SC WH-5 ST WH6 156DC LWH-200 CHM200DT 406 H200SC WH-6 ST WH7 157DC LWH-250 CHM250DT 407 H250SC WH-7 ST WH8 158DC LWH-300 CHM300DT 408 H300SC WH-8 ST WH9 159DC LWH-350 CHM350DT 409 H350SC WH-9 ST WH10 160DC LWH-400 CHM400DT 410 H400SC WH-10 ST DC2 L S C DC LT LT2 LQ9038 LML LT RT LT3890DC LT LT2 LQ9050 LML LT RT LT5090DC LT LT2 LQ9075 LML LT RT LT7590DC LT LT2 LQ9100 LML LT RT LT DC SR SR SR LT LT2 LQ9125 LML LT RT LT DC LT LT2 LQ9150 LML LT RT LT DC LT LT2 LQ9200 LML LT RT LT DC SR SR SR CG SRC

72 HLEX ITEM RLINGTON P MDISON NEER REGL T & TOPZ RCO PECO C-H CG SRC C HL201SC DC HL202SC 781-DC GWS MS4 GWS W S ESGIP S1216SC W CS20 G NMWH43 CG TWCL- 50MN HS TWCL- 75MN HS SP S-1/0 SW7 796 S-1/0-SP SP S-2/0 SW8 797 S-2/0-SP SP S-3/0 SW9 798 S-3/0-SP SP S-4/0 SW S-4/0-250-SP SP S-2 SW6 795 S-2-SP S-3 SW5 794 S-3-SP SP S-4 SW4 793 S-4-SP SP S-6 SW3 792 S-6-SP SP S-8 SW2 791 S-8-SP S-1/0 S1/0 696 S-1/ S-2/0 S2/0 697 S-2/ S-3/0 S3/0 698 S-3/ S-4/0 S4/ S-4/ S-2 S2 695 S S-3 S3 694 S S-4 S4 693 S S-6 S6 692 S S-8 S8 691 S SLU125 CLU125 SL SLU SL SLU SL SLU SLU70 CLU70 SL SLU CLU35 SL SLU SLU35 SL SLU GS GS1 M C C C C C C MC C MC L GRC50 GRC1 RC GRC63 GRC2 RC GRC75 GRC3 RC CROSS REFERENCE 73

73 TM CROSS REFERENCE CROSS REFERENCE HLEX ITEM RLINGTON P MDISON NEER REGL T & TOPZ RCO PECO C-H L160 GC GC D D1309 L160-D GC1D D L180-2 GC L C H L160-1H H L160-2H D R GSP SP PVC C SP SP SP SP ME WGC-1 WC WGC-2 WC1/ WGC P LL-41CGC LLL-50C LL15-MTC LL-42CGC LLL-75C LL25-MTC C-41CGC LCL-50C C15-MTC C-42CGC LCL-75C C25-MTC L-41CGC LL-50C L15-MTC L-42CGC LL-75C L25-MTC T-41CGC LTL-50C T15-MTC T-42CGC LTL-75C T25-MTC LR-41CGC LRL-50C LR15- MTC LR-42CGC LRL-75C LR25- MTC LL31 LLE-50 LL50SS 8721 LL-1 ELL1 ELL-1 LL-50E LL15-MT LL32 LLE-75 LL75SS 8722 LL-2 ELL2 ELL-2 LL-75E LL25-MT LL33 LLE-100 LL100SS 8723 LL-3 ELL3 ELL-3 LL-100E LL35-MT LL34 LLE-125 LL125SS 8724 LL-4 ELL4 ELL-4 LL-125E LL45-MT LL35 LLE-150 LL150SS 8725 LL-5 ELL5 ELL-5 LL-150E LL55-MT LL36 LLE-200 LL200SS 8726 LL-6 ELL6 ELL-6 LL-200E LL65-MT SEC192 SC L L31 LE-50 L50SS 8701 L-1 EL1 EL-1 L-50E L15-MT L32 LE-75 L75SS 8702 L-2 EL2 EL-2 L-75E L25-MT L33 LE-100 L100SS 8703 L-3 EL3 EL-3 L-100E L35-MT L34 LE-125 L125SS 8704 L-4 EL4 EL-4 L-125E L45-MT L35 LE-150 L150SS 8705 L-5 EL5 EL-5 L-150E L55-MT L36 LE-200 L200SS 8706 L-6 EL6 EL-6 L-200E L65-MT SEC194 SC XL-L LR31 LRE-50 LR50SS 8711 LR-1 ELR1 ELR-1 LR-50E LR15-MT LR32 LRE-75 LR75SS 8712 LR-2 ELR2 ELR-2 LR-75E LR25-MT LR33 LRE-100 LR100SS 8713 LR-3 ELR3 ELR-3 LR-100E LR35-MT LR34 LRE-125 LR125SS 8714 LR-4 ELR4 ELR-4 LR-125E LR45-MT LR35 LRE-150 LR150SS 8715 LR-5 ELR5 ELR-5 LR-150E LR55-MT LR36 LRE-200 LR200SS 8716 LR-6 ELR6 ELR-6 LR-200E LR65-MT MT L809M EHMT L800CL ECO SH EHC L801CL ECO SH EHC L802CL ECO SH EHC-3 74

74 HLEX ITEM RLINGTON P MDISON NEER REGL T & TOPZ RCO PECO C-H L803CL ECO SH EHC L804CL ECO SH EHC L805CL ECO SH EHC L806CL ECO SH EHC L807CL ECO SH EHC L808CL ECO SH EHC L809CL ECO SH EHC ML-44 LMO-125 L6X ML-4 MLCG4 MOL ML-45 LMO-150 L6X ML-5 MLCG4 MOL ML-46 LMO-200 L6X ML-6 MLCG6 MOL LLCG LL-41CG LLL50 LL50CG 8821 DLL-1-CG LL1CG ELL-1CG LLC-50 LL15-CGN LLCG LL-42CG LLL75 LL75CG 8822 DLL-2-CG LL2CG ELL-2CG LLC-75 LL25-CGN LLCG LL-43CG LLL100 LL100CG 8823 DLL-3-CG LL3CG ELL-3CG LLC-100 LL35-CGN LLCG LL-44CG LLL125 LL125CG 8824 DLL-4-CG LL4CG LLC-125 LL45-CGN LCG LL-45CG LLL150 LL150CG 8825 DLL-5-CG LL5CG LLC-150 LL55-CGN LLCG LL-46CG LLL200 LL200CG 8826 DLL-6-CG LL6CG LLC-200 LL65-CGN LL-47CG LLL250 LL250CG DLL-7-CG LL7CG LL75-CGN LL-48CG LLL300 LL300CG DLL-8-CG LL8CG LL85-CGN LL-49CG LLL350 LL350CG DLL-9-CG LL9CG LL95-CGN LL-50CG LLL400 LL400CG DLL-10- LL105- LL10CG CG CGN CCG C-41CG LCL50 C50CG 8831 DC-1-CG C1CG EC-1CG CC-50 C15-CGN CCG C-42CG LCL75 C75CG 8832 DC-2-CG C2CG EC-2CG CC-75 C25-CGN CCG C-43CG LCL100 C100CG 8833 DC-3-CG C3CG EC-3CG CC-100 C35-CGN CCG C-44CG LCL125 C125CG 8834 DC-4-CG C4CG CC-125 C45-CGN CCG C-45CG LCL150 C150CG 8835 DC-5-CG C5CG CC-150 C55-CGN CCG C-46CG LCL200 C200CG 8836 DC-6-CG C6CG CC-200 C65-CGN C-47CG LCL250 C250CG DC-7-CG C7CG C75-CGN C-48CG LCL300 C300CG DC-8-CG C8CG C85-CGN C-49CG LCL350 C350CG DC-9-CG C9CG C95-CGN C-50CG LCL400 C400CG DC-10-CG C10CG C105- CGN LCG L-41CG LL50 L50CG 8801 DL-1-CG L1CG EL-1CG LC-50 L15- CGN LCG L-42CG LL75 L75CG 8802 DL-2-CG L2CG EL-2CG LC-75 L25- CGN LCG L-43CG LL100 L100CG 8803 DL-3-CG L3CG EL-3CG LC-100 L35- CGN LCG L-44CG LL125 L125CG 8804 DL-4-CG L4CG EL-4CG LC-125 L45- CGN LCG L-45CG LL150 L150CG 8805 DL-5-CG L5CG EL-5CG LC-150 L55- CGN LCG L-46CG LL200 L200CG 8806 DL-6-CG L6CG EL-6CG LC-200 L65- CGN LCG L-47CG LL250 L250CG DL-7-CG L7CG LC-250 L75- CGN LCG L-48CG LL300 L300CG DL-8-CG L8CG LC-300 L85- CGN LCG L-49CG LL350 L350CG DL-9-CG L9CG LC-350 L95- CGN LCG L-50CG LL400 L400CG DL-10- L105- L10CG LC-400 CG CGN L-31 LEL-50 DL-1-C EL-1CG L15-MTC L-32 LEL-75 DL-2-C EL-2CG L25-MTC L-33 LEL-100 DL-3-C EL-3CG L35-MTC L-37 L-7 L75-MTC CROSS REFERENCE 75

75 TM CROSS REFERENCE CROSS REFERENCE 76 HLEX ITEM RLINGTON P MDISON NEER REGL T & TOPZ RCO PECO C-H T-41CG LTL50 T50CG 8841 DT-1-CG T1CG ET-1CG TC-50 T15-CGN T-42CG LTL75 T75CG 8842 DT-2-CG T2CG ET-2CG TC CGN TCG T-43CG LTL100 T100CG 8843 DT-3-CG T3CG ET-3CG TC-100 T35-CGN TCG T-44CG LTL125 T125CG 8844 DT-4-CG T4CG ET-4CG TC-125 T45-CGN TCG T-45CG LTL150 T150CG 8845 DT-5-CG T5CG ET-5CG TC-150 T55-CGN TCG T-46CG LTL200 T200CG 8846 DT-6-CG T6CG ET-6CG TC-200 T65-CGN T-47CG LTL250 T250CG DT-7-CG T7CG T75-CGN T-48CG LTL300 T300CG DT-8-CG T8CG T85-CGN T-49CG LTL350 T350CG DT-9-CG 79CG T95-CGN T-50CG LTL400 T400CG DT-10-CG T10CG T105-CGN LRCG LR-41CG LRL50 LR50CG 8811 DLR-1-CG LR1CG ELR-1CG LRC-50 LR15- CGN LRCG LR-42CG LRL75 LR75CG 8812 DLR-2-CG LR2CG ELR-2CG LRC-75 LR25- CGN LRCG LR-43CG LRL100 LR100CG 8813 DLR-3-CG LR3CG ELR-3CG LRC-100 LR35- CGN LRCG LR-44CG LRL125 LR125CG 8814 DLR-4-CG LR4CG LRC-125 LR45- CGN LRCG LR-45CG LRL150 LR150CG 8815 DLR-5-CG LR5CG LRC-150 LR55- CGN LRCG LR-46CG LRL200 LR200CG 8816 DLR-6-CG LR6CG LRC-200 LR65- CGN LR-47CG LRL250 LR250CG DLR-7-CG LR7CG LR75- CGN LR-48CG LRL300 LR300CG DLR-8-CG LR8CG LR85- CGN LR-49CG LRL350 LR350CG DLR-9-CG LR9CG LR-95- CGN LR-50CG LRL400 LR400CG DLR-10- LR105- LR10CG CG CGN SG61 LF50 FG GKV1 581 EGKV-1 VG-50 GSK SG62 LF75 FG GKV2 582 EGKV-2 VG-75 GSK SG63 LF100 FG GKV3 583 EGKV-3 VG-100 GSK SG64 LF125 FG GKV4 584 EGKV-4 VG125 GSK SG66 LF200 FG GKV5 585 EGKV-5 VG-200 GSK SG67 LF250 FG GKN6 EGKN-6 VG-250 GS- K085N SG69 LF350 FG GKN7 EGKN-7 VG-350 GS- K095N SC41 L50 S SCV1 571 ESCV-1 C SC42 L75 S SCV2 572 ESCV-2 C SC43 L100 S SCV3 573 ESCV-3 C SC44 L125 S SCV4 574 ESCV-4 C SC46 L200 S SCV5 575 ESCV-5 C SC47 L250 S SCV6 577 ESCV-6 C SC49 L350 S SCV7 579 ESCV-7 C C-41 LC50 C C-1-RD C1 EC-1 C-50 C SL 1025 L900 SL SL1 211 ESL- 1CG 730 SL SL 1026 L901 SL SL2 212 ESL- 2CG 731 SL SL 1027 L902 SL SL3 213 ESL- 3CG 732 SL SL 1028 L903 SL SL4 214 ESL- 4CG 733 SL SL 1029 L904 SL SL5 215 ESL- 5CG 734 SL SL 1030 L905 SL SL6 216 ESL- 6CG 735 SL L L41 L50 L L-1 L1 EL-1 L-50 L L L42 L75 L L-2 L2 EL-2 L-75 L25

76 HLEX ITEM RLINGTON P MDISON NEER REGL T & TOPZ RCO PECO C-H L L43 L100 L L-3 L3 EL-3 L-100 L L L44 L125 L L-4 L4 EL-4 L-125 L L L45 L150 L L-5 L5 EL-5 L-150 L L L46 L200 L L-6 L6 EL-6 L-200 L T T41 LT50 TC T-1 T1 ET-1 T-50 T T T42 LT75 TC T-2 T2 ET-2 T-75 T T T43 LT100 TC T-3 T3 ET-3 T-100 T JC W12 JC12S 298S JC W JC SH1 705 W11 SH SH RWH-1 P P P MWH-1 P WH KO L111 KO KO L112 KO KO L113 K KO L114 KO KO L115 KO KO L116 KO KO L111 K KO L112 K RF-125 P38 NC RF-200 P40 NC RF RF-250 P RF ST SN RS ST SN RS S HS S S HS S S HS S S HS S S HS S S HS S S HS S S HS S S HS S S HS S TH HS TH-162S TH HS TH-163S TH HS TH-164S TH HS TH-165S TH HS TH-166S TH HS TH-167S TH HS TH-168S TH HS TH-169S TH HS TH-170S TH HS TH-171S NS1 920NS 1600 NS N101SC DS NSF NS2 921NS 1605 NS N102SC DS NSF NS3 922NS 1615 NS N103SC DS NSF S TS S S TS S S TS S S TS S S TS S S TS S TH TS TH-180S TH TS TH-181S TH TS TH-182S TH TS TH-183S TH TS TH-184S CROSS REFERENCE 77

77 TM CROSS REFERENCE CROSS REFERENCE 78 HLEX ITEM RLINGTON P MDISON NEER REGL T & TOPZ RCO PECO C-H TH TS TH-185S SL LNS-50-I LS S LS SL SL SL LNS-75-I LS S LS SL SL SL LNS-100-I LS S LN SL SL SL LNS-125-I LS S LS SL SL SL LNS-150-I LS S LS SL SL SL LNS-200-I LS S LS SL SL LNS-50 L LN101SC X LNS-75 L LN X LNS-100 L LN X LNS-125 L LN X LNS-150 L LN X LNS-200 L LN X LNS-250 L LN X LNS-300 L LN X LNS-350 L LN X LNS-400 L LN X RX MC 699 X X X SE SE C 3-8S, 3-6S,3-4S SE SE D 3-2S S 883-SE SE E 3-10S, 3-20S S 884-SE SE F 3-30S, 3-40S C STRP 1881-SE SE TH-188C E STRP 1882-SE SE TH-188D H STRP 1883-SE SE TH-188E K STRP 1884-SE SE TH-188F MEC S 7601 TC S ST 650S MEC S 7602 TC S ST 651S MEC S 7603 TC S ST MEC S 7604 TC S ST MEC S 7605 TC S ST MEC S 7606 TC S ST MEC S 7607 TC S ST MEC S 7608 TC S ST MEC S 7609 TC S ST MEC S 7610 TC S ST MEC S 7611 TK S ST 660S MEC S 7612 TK S ST 661S MEC S 7613 TK S ST MEC S 7614 TK S ST MEC S 7615 TK S ST MEC S 7616 TK S ST MEC S 7617 TK S ST MEC S 7618 TK S ST MEC S 7619 TK S ST MEC S 7620 TK S ST RT 250SRT MECR SR TC111-RT RT RT 251SRT MECR SR TC112-RT RT ST SN RS RT 252SRT MECR SR TC113-RT 2904RT 652RT RT 253SRT MECR SR TC114-RT 2905RT 653RT RT 254SRT MECR SR TC115-RT 2906RT 654RT RT 255SRT MECR SR TC116-RT 2908RT 655RT RT 256SRT MECR SR TC117-RT 2940RT 656RT RT 257SRT MECR SR TC118-RT 2942RT 657RT RT 258SRT MECR SR TC119-RT 2944RT RT 259SRT MECR SR TC1110- RT 2946RT

78 HLEX ITEM RLINGTON P MDISON NEER REGL T & TOPZ RCO PECO C-H ST SN RS RT 260SRT MECR SR TK111-RT 2922RT 660RT RT 261SRT MECR SR TK112-RT 2923RT 661RT RT 262SRT MECR SR TK113-RT 2924RT 662RT RT 263SRT MECR SR TK114-RT 2925RT 663RT RT 264SRT MECR SR TK115-RT 2926RT 664RT RT 265SRT MECR SR TK116-RT 2928RT 665RT RT 266SRT MECR SR TK117-RT 2950RT 666RT RT 267SRT MECR SR TK118-RT 2952RT 667RT RT 268SRT MECR SR TK119-RT 2954RT RT 269SRT MECR SR TK1110- RT 2956RT SS HI MES S 7701 TC S ST 450S MES S 7702 TC S ST MES S 7703 TC S ST MES S 7704 TC S ST MES S 7705 TC S ST MES S 7706 TC S ST MES S 7707 TC S ST MES S 7708 TC S ST MES S 7709 TC S ST MES S 7710 TC S ST MES S 7711 TK S ST MES S 7712 TK S ST MES S 7713 TK S ST MES S 7714 TK S ST MES S 7715 TK S ST MES S 7716 TK S ST MES S 7717 TK S ST MES S 7718 TK S ST MES S 7719 TK S ST MES S 7720 TK S ST SP SP 43 SP CP KP GC GC99 GC GSW GP GS MNT HC CPR MNT HC CPR MNT HC CPR MNT HC CPR MNT DC CPR MNT HC CPR MNT HK CPR MNT HK CPR MNT HK CPR MNT HK CPR RC P RC P RC P RC P RC P RC P RC P RC P RC P RC P ELR P ELR P ELR P ELR P1912 CROSS REFERENCE 79

79 TM CROSS REFERENCE CROSS REFERENCE HLEX ITEM RLINGTON P MDISON NEER REGL T & TOPZ RCO PECO C-H ELR P ELR P ELR P ELR P ELR P ELR P ELR P ELR P ELR P ELR P ELR P ELR P ELR P ELR P ELR P ELR P N P N P N P N P N-50CL 6451 P N P N-75CL 6452 P N P N P N-100CL 6453 P N P N-125CL 6454 P N P N P N-150CL 6455 P N-200CL 6456 P N P N P N P N P N P N P N P N P N P N P N P N P N P N P N P N P N P N P N P N P N P N P N P N P N P N P N P N P N P N P

80 HLEX ITEM RLINGTON P MDISON NEER REGL T & TOPZ RCO PECO C-H N P N P N P N P N P N P N P N P N P N P N P N P N P N P N P N P N P N P N P N P N P N P N P N P N P N P N P N P N P N P ELE P ELE P ELE P ELE P ELE P ELE P ELE P ELE P ELE P ELE P ELE P ELE P ELE P ELE P ELE P ELE P ELE P ELE P ELE P ELE P N P N P N P N P N-250CL 6457 P N-300CL 6458 P N-350CL 6459 P N-400CL 6410 P P T L15 RX50 NC T L16 RX75 NC T L17 RX125 NC CROSS REFERENCE 81

81 TM CROSS REFERENCE CROSS REFERENCE HLEX ITEM RLINGTON P MDISON NEER REGL T & TOPZ RCO PECO C-H T L18 RX150 NC L-500 TPC50 EK M L-501 TPC75 EK L-502 TPC100 EK L-503 TPC125 EK L-504 TPC150 EK L-505 TPC200 EK L-506 TPC250 EK L-507 TPC300 EK L-508 TPC350 EK L-509 TPC400 EK C25 951S 25 C250 C1T 122S S 529-S MC-50 MFC XC731 MC MC-50 QLD50S MC-52 MFC MC MC-50D QLD50D SLT MSTR-38 4QS38 LT RT-38S LT SLT MSTR-50 4QS50 LT RT-50S LT SLT MSTR-75 4QS75 LT RT-75S LT SLT MSTR-100 4QS100 LT RT-100S LT SLT MSTR-125 4QS125 LT RT-125S LT SLT MSTR-150 4QS150 LT RT-150S LT SLT MSTR-200 4QS200 LT RT-200S LT SLT MSTR QS438 LT RT-45-38S LT SLT MSTR QS450 LT RT-45-50S LT SLT MSTR QS475 LT RT-45-75S LT SLT MSTR QS4100 LT RT S LT SLT MSTR QS4125 LT RT S LT SLT MSTR QS4150 LT RT S LT SLT MSTR QS4200 LT RT S LT SLT MSTR QS938 LT RT-90-38S LT SLT MSTR QS950 LT RT-90-50S LT SLT MSTR QS975 LT RT-90-75S LT SLT MSTR QS9100 LT RT S LT SLT MSTR QS9125 LT RT S LT SLT MSTR QS9150 LT RT S LT SLT MSTR QS9200 LT RT S LT W CH H 6H H50W W CH H 6H H75W W CH H 6H H100W /2-W CH H 6H2D H125W 2 1/ W CH H 6H H125W W CH H 6H H150W W CH H 6H H200W W CH H 6H H250W W CH H 6H H300W W CH H 6H H350W W CH H H400W RW MR2 RW W RW RW MR3 RW W RW RW MR4 RW W RW RW MR5 RW W RW RW MR6 RW W RW RW MR7 RW W RW RW MR8 RW W RW RW MR9 RW W RW RW MR10 RW W RW S RW MR11 RW W RW RW MR12 RW W RW

82 HLEX ITEM RLINGTON P MDISON NEER REGL T & TOPZ RCO PECO C-H RW MR13 RW W RW RW MR14 RW W RW RW MR15 RW W RW RW MR16 RW W RW RW MR W RW SFR-75 MFHR SFS-75 MFHS S ESGI S1216SC 72599P S ESGIM S1216SC EMT50 TW EMT75 TW EMT100 TW EMT125 TW EMT150 TW EMT200 TW NM NM ME-3201 NST CCC NM NM ME NM NM 1200 NC501SC NM NM 1202 NC502SC CP-50 P U CP-75 P U CP-100 P U CP-125 P U CP-150 P U CP-200 P U CP-250 P U CP-300 P U CP-350 P U CP-400 P U S S IT100SC P S S0 IT100SC S S IT P S S1 IT S S IT P S S2 IT S S IT P S S3 IT S S IT P S S4 IT NM 1201 NC501D- LSC NMLT NMLQ-1038 NMM01 LT500 P470 NMLT NMLT NMLQ-1050 NMM11 LT501 P471 NMLT NMLT NMLQ-1075 NMM21 LT502 P472 NMLT NMLT NMLQ-1100 NMM31 LT503 P473 NMLT NMLT NMLQ-1125 P474 NMLT NMLT NMLQ-1150 P475 NMLT NMLT NMLQ-1200 P476 NMLT NMLT NMLQ-9038 NML01 LT590 P490 NMLT NMLT NMLQ-9050 NML11 LT591 P491 NMLT NMLT NMLQ-9075 NML21 LT592 P492 NMLT CROSS REFERENCE 83

83 TM CROSS REFERENCE CROSS REFERENCE 84 HLEX ITEM RLINGTON P MDISON NEER REGL T & TOPZ RCO PECO C-H NMLT NMLQ-9100 NML31 LT593 P493 NMLT NMLT NMLQ-9125 P494 NMLT LPCG50 MNPT NMLT NMLQ-9150 P495 NMLT NMLT NMLQ-9200 P496 NMLT LPCG757 MNPT EH200 ME EH201 ME PVC PVC 190 PVC P PVC PVC 191 PVC X PVC PVC 192 PVC XL PMH PMH PMH-125 VMH PMH-150 VHM PMH-200 VMH DSC1 DS DUX DX DSC5 DS DUX DX DCI2 IL21 TCI S TC811SC 651i DC DCI2 IL23 TCI S TC812SC 652i DC DCI2 IL25 TCI S TC813SC 653i DC DCI2 IL27 TCI S TC814SC 654i DC DCI2 IL29 TCI S TC815SC 655i DC DCI2 IL31 TCI S TC816SC 656i DC DCI2 IL33 TCI S TC817SC 657i DC DCI2 IL35 TCI S TC818SC 658i DC DCI2 IL37 TCI S TC819SC 659i DC DCI2 IL39 TCI S TC8110SC 660i DC I MEC ST 7601-S TC Si ST I MEC ST 7602-S TC Si ST I MEC ST 7603-S TC Si ST I MEC ST 7604-S TC Si ST I MEC ST 7605-S TC Si ST I MEC ST 7606-S TC Si ST I MEC ST 7607-S TC Si ST I MEC ST 7608-S TC Si ST I MEC ST 7609-S TC Si ST I MEC ST 7610-S TC Si ST I MES ST 7701-S TC Si ST I MES ST 7702-S TC Si ST I MES ST 7703-S TC Si ST I MES ST 7704-S TC Si ST I MES ST 7705-S TC Si ST I MES ST 7706-S TC Si ST I MES ST 7707-S TC Si ST I MES ST 7708-S TC Si ST I MES ST 7709-S TC Si ST I MES ST 7710-S TC Si ST L DCI2 IL42-1 SCI S XC i DC L DCI2 IL42-2 SCI S XC i DC L DCI2 IL S XC i 1710DC L DCI2 IL S XC i 1711DC L DCI2 IL S XC i 1712DC L DCI2 IL S XC i 1713DC GF38 519DCI2 GCI S XC i DC GF50 520DCI2 IL44-1 GCI S XC i GF75 521DCI2 IL44-2 GCI S XC i GF DCI2 IL S XC i DC

84 HLEX ITEM RLINGTON P MDISON NEER REGL T & TOPZ RCO PECO C-H GF DCI2 IL S XC i GF DCI2 IL S XC i GF DCI2 IL S XC i DCI2 XC DCI N 38ST/40ST 38SP SLTI MSTR-38-4QS38T LT S 3511 RT-38S LT SLTI MSTR-50-4QS50T LT S 3512 RT-50S LT SLTI MSTR-75-4QS75T LT S 3513 RT-75S LT SLTI MSTR-100-4QS100T LT S 3514 RT-100S LT SLTI MSTR-125-4QS125T LT S 3515 RT-125S LT SLTI MSTR-150-4QS150T LT S 3516 RT-150S LT SLTI MSTR-200-4QS200T LT S 3518 RT-200S LT SLTI MSTR S 3520 LT SLTI MSTR S 3522 LT SLTI MSTR S 3524 LT SLTI MSTR S 3526 LT SLTI MSTR- RT-45-4QS438T LT S S LT SLTI MSTR- RT-45-4QS450T LT S S LT SLTI MSTR- RT-45-4QS475T LT S S LT SLTI MSTR- RT-45-4QS4100T LT S S LT SLTI MSTR- RT-45-4QS4125T LT S S LT SLTI MSTR- RT-45-4QS4150T LT S S LT SLTI MSTR- RT-45-4QS4200T LT S S LT SLTI MSTR S LT SLTI MSTR S LT SLTI MSTR S LT SLTI MSTR S LT L15 560DCI SLTI MSTR- RT-90-4QS938T LT S S LT SLTI MSTR- RT-90-4QS950T LT S S LT SLTI MSTR- RT-90-4QS975T LT S S LT SLTI MSTR- RT-90-4QS9100T LT S S LT SLTI MSTR- RT-90-4QS9125T LT S S LT SLTI MSTR- RT-90-4QS9150T LT S S LT SLTI MSTR- RT-90-4QS9200T LT S S LT SLTI MSTR LT S 3550 LT CROSS REFERENCE 85

85 TM CROSS REFERENCE CROSS REFERENCE RT 254-SRTI MECR SRT TC715-RT 1654RT HLEX ITEM RLINGTON P MDISON NEER REGL T & TOPZ RCO PECO C-H SLTI MSTR LT S 3552 LT SLTI MSTR S 3554 LT SLTI MSTR LT S 3556 LT DCI IL-701 CNI S H i DCI2 IL110 CI90 XC i DC DCI2 IL110-1 CI95 XC i DC DCI2 IL110-2 CI96 XC i DC DCI2 IL110-3 XC i DC DCI2 IL110-4 XC i DC DCI2 IL110-5 XC i DC DCI2 IL110-6 XC i DC WH1 151-DC LWH-50 CHM50DT 401 H050SC WH-1 ST WH2 152-DC LWH-75 CHM75DT 402 H075SC WH-2 ST DCI2 IL121 TCI S TC821SC 631i DC DCI2 IL123 TCI S TC822SC 632i DC DCI2 IL125 TCI S TC823SC 633i DC DCI2 IL127 TCI S TC824SC 634i DC DCI2 IL129 TCI S TC825SC 635i DC DCI2 IL131 TCI S TC826SC 636i DC DCI2 IL133 TCI S TC827SC 637i DC DCI2 IL135 TCI S TC828SC 638i DC DCI2 IL137 TCI S TC829SC 639i DC DCI2 IL139 TCI S TC8210SC 640i DC RT 250-SRTI MECR SRT TC711-RT 1650RT RT 251-SRTI MECR SRT TC712-RT 1651RT RT 252-SRTI MECR SRT TC713-RT 1652RT RT 253-SRTI MECR SRT TC714-RT 1653RT RT 255-SRTI MECR SRT TC716-RT 1655RT RT 256-SRTI MECR SRT TC717-RT 1656RT RT 257-SRTI MECR SRT TC718-RT 1657RT RT 258-SRTI MECR SRT TC719-RT R 259-SRTI MECR SRT TC7110- RT HL500 81DC LG141-1 HL HL RR DC HL750 82DC LG141-2 HL HL RR DC HL DC LG141-3 HL HL RR DC DC2 LG HL R DC DC2 LG HL R DC DC LG144-1 THL500G EE DC DC LG144-2 THL750G EE DC DC LG TL EMT 8100EE DC HL DC HL DC HL DC DC DC DC CGI-50 GL G MIG-80 GLL1 DC DC CGI-75 GL G MIG-81 GLL2 DC DC CGI-100 GL G MIG-82 GLL3 DC DC CGI-125 GL G MIG-83 GLL4 DC DC CGI-150 GL G MIG-84 GLL5 DC DC CGI-200 GL G MIG-85 GLL6 DC DC CGI-250 GL G MIG-86 GLL7 DC DC CGI-300 GL G MIG-87 GLL8 DC DC CGI-350 GL G MIG-88 GLL9 DC 86

86 HLEX ITEM RLINGTON P MDISON NEER REGL T & TOPZ RCO PECO C-H DC CGI-400 GL G MIG-89 GLL10 DC N 3838ST/ 4040ST 3838SP LT38 429LTI2 LQ1038-I LMM S LT i RT-38 LT38DC LT50 430LTI2 LQ1050-I LMM S LT i RT-50 LT50DC LT75 431LTI2 LQ1075-I LMM S LT i RT-75 LT75DC LT LTI2 LQ1100-I LMM S LT i RT-100 LT100DC LT LTI2 LQ1125-I LMM S LT i RT-125 LT125DC LT LTI2 LQ1150-I LMM S LT i RT-150 LT150DC LT LTI2 LQ1200-I LMM S LT i RT-200 LT200DC LT LTI2 LQ1250-I LMM S LT LT250DC LT LTI2 LQ1300-I LMM S LT LT300DC LT LTI2 LQ1350-I LMM S LT LT350DC LT LTI2 LQ1400-I LMM S LT LT400DC MNT HK CPR MNT HK CPR LT LTI2 LQ9038-I LML S LT i RT LT- 3890DC LT LTI2 LQ9050-I LML S LT i RT LT- 5090DC LT LTI2 LQ9075-I LML S LT i RT LT- 7590DC LT LTI2 LQ9100-I LML S LT i RT LT DC LT LTI2 LQ9125-I LML S LT i RT LT DC LT LTI2 LQ9150-I LML S LT i RT LT DC LT LTI2 LQ9200-I LML S LT i RT LT DC LT LTI2 LQ9250-I LML S LT LT DC LT LTI2 LQ9300-I LML S LT LT DC LT LTI2 LQ9350-I LML S LT LT DC LT LTI2 LQ9400-I LML S LT LT DC CROSS REFERENCE 87

87 fax urora Road. Cleveland, OH SCOTT FETZER COMPNY PRINTED IN THE US HLEX is a registered trademark of Halex/Scott Fetzer Company. Trade names and corporate references herein are for identification purposes only and are not intended for promotion purposes. ll product or specification information is subject to change without notice. L008-R060110