SUBMITTAL TRANSMITTAL OCPS CLAY SPRINGS ES REVIEWED SUBMITTAL NUMBER: SUBMITTAL DETAILS: CONTRACTOR/CM:

Transcription

1 OCPS CLAY SPRINGS ES SUMITTAL DETAILS: SUJECT: CONDUIT UILDING REFERENCE: DATE RECIEVED: Oct 09, 204 DISCIPLINE: Electrical PRIORITY STATUS: 2-STANDARD SPECIFICATION REF: REVIEWER DUE DATE: 0/2/204 DWG REF. NONE DWG TITLE: RETURNED ITEMS: NO OF ITEMS: ITEM DESCRIPTI CONTRACTOR/CM: SUMITTAL TRANSMITTAL SUMITTAL NUMER: : WILLIAMS COMPANY : RAD KUIN 20 SILVER STAR RD. ORLANDO, FL, 2809 (407) FAX:(407) DATE RETURNED TO CM: 0//204 Product Literature(s) REVIEW STATUS: REVIEWED REVIEWERS: PRIMARY: SECONDARY: TAD RIVENARK MATERN ENGINEERING PHN: (407) FAX: (407) trivenbark@matern.net KEVIN KING MATERN ENGINEERING PHN: (407) FAX: (407) kking@matern.net COMMENTS: cc: OWNER : CALVIN WOOLFOLK 650 MAGIC WAY, LDG. 200 ORLANDO, FL, 2809 (407) FAX:(407) R+ FILE: : X6 RHODES + RITO ARCHITECTS INC. : 605 E. ROINSON STREET, SUITE 750 : ORLANDO, FL. : 280 : : FAX PAGE OF

2 SHOP DRAWING COMMENTS Date: October 0, 204 Project: OCPS Clay Springs E.S. y: Tad Rivenbark Proj. No: Submittal: Conduit THE FOLLOWING COMMENTS SHALL E CONSIDERED AN INTEGRAL PART OF THE SHOP DRAWING AND/OR PRODUCT DATA SUMITTAL. ACTION CODE KEY A C D E N No exceptions taken. Make corrections noted. Revise and Resubmit. Submit Specified Item. Rejected. Review not required : No Exceptions Noted. END OF SHOP DRAWING COMMENTS Corporate Office: 0 Candace Drive, Maitland, Florida 275- Phone: Orlando Fort Myers Jacksonville Tampa Page of

3 OCPS CLAY SPRINGS ES SUMITTAL DETAILS: SUJECT: CONDUIT DATE RFI RECIEVED: Oct 09, 204 DISCIPLINE: Electrical PRIORITY STATUS: 2-STANDARD SPECIFICATION REF: REVIEWER DUE DATE: 0/2/204 DWG REF. NONE DWG TITLE: SUMITTAL CONTENTS: NO OF ITEMS: ITEM DESCRIPTION PRODUCT LITERATURE(S) REVIEWERS: PRIMARY: SECONDARY: SUMITTAL ASSIGNMENT MEMO TAD RIVENARK SUMITTAL NUMER: MATERN ENGINEERING PHN: (407) FAX: (407) KEVIN KING MATERN ENGINEERING PHN: (407) FAX: (407) REVIEW STATUS: REVIEWED FURNISHED AS MARKED REVISE AND RESUMIT RE-SUMIT WITH ITEMS NOT REVIEWED REJECTED THIS SUMITTAL IS ISSUED TO YOU FOR YOUR REVIEW. PLEASE RESPOND AND RETURN...WITH THIS COMPLETED SAM TRANSMITTAL...TO MICHELE UDAY-URDANETA NO LATER THAN: 0/2/204. PLEASE COMPLETE REVIEW STATUS AT RIGHT COMMENTS: THIS SUMITTAL WAS REVIEWED Y : (please print) cc: OWNER : CALVIN WOOLFOLK 650 MAGIC WAY, LDG. 200 ORLANDO, FL, 2809 CONTR/CM: : WILLIAMS COMPANY : RAD KUIN 20 SILVER STAR RD. R+ FILE: : X6

4 40 West Drive Altamonte Springs, Florida 274 EC Phone: (407) /2/4 CLAY SPRINGS ELEMENTARY SCHOOL TCE JO #00707 OWNER: Orange County Public Schools Design & Construction ldg. 200, 650 Magic Way Orlando, FL 2809 GENERAL CONTRACTOR: Williams Company 20 Silver Star Road Orlando, FL 2804 ARCHITECT: Rhodes + rito Architects 605 E. Robinson Street, Suite 750 Orlando, FL 280 ENGINEER: Matern Professional Engineering, Inc. 0 Candace Drive Maitland, FL 275 SUCONTRACTOR: Tri-City Electrical Contractors, Inc. 40 West Drive Altamonte Springs, FL 274 Specification Section: Conduit Submittal Cover.doc AC ACCREDITED QUALITY CONTRACTOR EC

5 Wheatland Tube Company Wheatland Galvanized Rigid Metal Conduit (RMC) -Steel General Rigid Steel Conduit is manufactured from mild steel tube. It has an accurate circular cross section, a uniform wall thickness, a defect free interior surface, and a continuous welded seam. The interior and exterior surfaces are thoroughly and evenly coated with zinc using the hot-dip galvanizing process, so that metal-tometal contact and galvanic protection against corrosion are provided. A clear coating of zinc chromate is also applied. Additional lubricating coating may be applied to the interior surface to reduce friction during wire insertion. Wheatland s RMC and its associated tubular fittings are produced in nominal trade sizes from /2 to 6. RMC produced in standard lengths of 0 feet (.05m), including coupling, is threaded on both ends, with a coupling applied to one end and a by size color-coded thread protector to the other. lack thread protectors identify trade sizes /2, -/2, 2-/2, -/2. Red thread protectors identify trade sizes /4 and - /4. lue thread protectors identify trade sizes, 2,, 4, 5, and 6. The pitch of threads conforms to the American National Standard for Pipe Threads, General Purpose (Inch), ANSI/ ASME.20.. The taper of threads is /4 inch per foot ( in 6). Threads are protected after cutting by an application of molten zinc. Each length of conduit has a label affixed that contains the UL Listing and a bar code. Each length is identified with Wheatland s name, Logo, the words Rigid Steel Conduit, a U.L. listing number and the words, Consult manufacturer for installation instructions. Applications Wheatland Galvanized Rigid Steel Conduit can be installed indoors or outdoors, in dry or wet locations, exposed or concealed, in all kinds of atmospheric conditions, and in hazardous locations when in accordance with National Electrical Code (NEC ) 2002 Article 44. Also, it provides excellent mechanical protection for the conductors while reducing Electro-Magnetic Field (EMF) exposure and shielding against Electro-Magnetic Interference (EMI). Wheatland s Trade Sizes through 6 are UL Listed for use with directional boring equipment. Galvanized Rigid Metal Conduit is an approved equipment grounding conductor (2002 NEC Article 0.8). The NEC establishes the minimum requirements for a safe electrical installation. ecause of the varied environments in which electrical equipment is installed, local amendments are often added. Always consult local codes prior to any installation. 900 Haddon Avenue Collingswood, NJ Specifications Wheatland Galvanized Rigid Conduit is manufactured in accordance with the latest edition of the following: American National Standards Institute - American National Standard for Electrical Rigid Steel Conduit (ERSC), ANSI C80. Underwriters Laboratories Standard for Electrical Rigid Metal Conduit - Steel, UL 6 National Electric Code Article 44 (999 NEC Article 46) Federal Specification - WW-C-58 The above Federal specification may still be referenced, however the federal government has canceled it and adopted the UL 6 standard and will no longer maintain a separate standard. Rigid Metal Conduit was covered under WW-C-58, Class, Type A. Additional information on the titles and designations of standards or requirements that have been used for the investigation of products in a specific category can be found in the Underwriters Laboratories Inc., General Information for Electrical Equipment Directory. The UL product category for Rigid Ferrous Metal Conduit is DYIX. Made in U.S.A. Certificate Numbers: Wheatland, PA Chicago, IL Little Rock, AR RMC_Spec_Sheet_2002.p65

6 Wheatland Tube Company 900 Haddon Avenue Collingswood, NJ Hot-Dip Galvanized Rigid Metal Conduit - Steel WEIGHTS AND DIMENSIONS Trade Size Metric Designator Threads Per Acceptable Length of Finished Conduit without Coupling Weight 0 Unit Lengths with Couplings Nominal Outside Diameter* Nominal Inside Diameter* Nominal Wall Thickness* *For information only, not a UL 6 requirement. Rigid Steel Conduit is manufactured to the lengths shown above, so when a straight-tapped coupling is attached a 0 foot (.05m) length is produced. Wheatland trade sizes through 6 are UL Listed for use with directional boring equipment. PACKAGING Trade Size Metric Designator Inch ft. Thread Protectors Color (+/- / 4 in.) in. Quantity Per undle Feet (+/- 6 mm) mm Meters Pieces lb kg in. mm in. mm in. mm / / / / / / 4 5 / / 2 4 / / / / / / / / undle s Quantity Per Lift Weight Per Lift Volume Per Lift The quantity per Lift conforms to the National Electrical Manufacturers Association Standards Publication RN-2 Packaging of Master undles for Steel Rigid Conduit, Intermediate Metal Conduit (IMC), and Electrical Metallic Tubing. Feet Meters Pounds K ilograms Cu. Ft. / 2 6 lack , / 4 2 Red , lue , / 4 5 Red / 2 4 lack lue / 2 6 lack lue / 2 9 lack lue lue lue Cu. m RMC_Spec_Sheet_2002.p65

7 Wheatland Tube Company Rigid Steel Conduit Nipples - Galvanized WEIGHTS AND PACKAGING Length CLOSE ½ 2 2½ ½ Trade Size ½ ¾ ¼ ½ 2 2½ ½ Length* (in.) / 8 / 8 ½ 5 / 8 ¾ 2 2¾ 2 5 / 8 2¾ 2 7 / 8 / 8 Standard Carton Quantity Weight Per 00 lbs *Length reference is for Close Nipples only. Standard Carton Quantity Weight Per 00 lbs. 8 9 Standard Carton Quantity Weight Per 00 lbs Standard Carton Quantity Weight Per 00 lbs Standard Carton Quantity Weight Per 00 lbs Standard Carton Quantity Weight Per 00 lbs Rigid Steel Conduit Nipples - Galvanized WEIGHTS AND PACKAGING Length Trade Size ½ ¾ ¼ ½ 2 2½ ½ Standard Carton Quantity Weight Per 00 lbs Standard Carton Quantity Weight Per 00 lbs Standard Carton Quantity Weight Per 00 lbs Standard Carton Quantity Prices are available upon request for nipples in lengths longer than 2 or with special threading requirements. 2 Weight Per 00 lbs Standard Carton Quantity 2 Weight Per 00 lbs Standard Carton Quantity 2 Weight Per 00 lbs

8 Wheatland Tube Company 4 Rigid Steel Conduit Elbows - Galvanized Special Large Radius 90º Trade Size 2" Radius 5" Radius 8" Radius 24" 0" Radius Radius Weight Each In Lbs. 6" Radius 42" Radius 48" Radius ¼ ½ ½ ½ 4 Standard Radius Standard Radius 85 Standard Radius *Weights for Special Large Radius 90º elbows shown above are approximate. To estimate weight for 60º, deduct 0%; for 45º, deduct 5%; for 0º, deduct 20%.Underwriters Laboratories, Inc. No. UL6, American National Standards Institute, C80.. Yard-Light Elbows Galvanized Trade Size Pieces Per Carton Weight Per 00 Pcs. Per Ctn. ½ ¾ ¼ ½ 2 2½ ½ ulk ulk ulk ulk ulk Dimensions of Yard-Light Elbows - Galvanized Trade Size /2 /4 ¼ ½ 2 2½ ½ 4 A C D E / 6 2 / 6 4 4½ 8 6¾ 2¼ ½ 5¾ / / 8 2¼ 7¼ 9¼ 0¼ ¼ 2¼ 8¼ 20½ 5 / 8 / 8 2¼ 9½ 2½ 4½ 5 2 0½ 22½ 6 5½ 2 9¼ 6¼ ¾ 7¾

9 6 Wheatland Tube Company ALUMINUM RIGID CONDUIT ACCESSORIESS ALL DIMENSIONS PROVIDED ARE FOR DESCRIPTIVE PURPOSES ONLY` 6 Rigid Coupling - Aluminum Trade Size ½ ¾ ¼ ½ 2 2½ ½ Rigid Aluminum Conduit Nipples Length Trade Size ½ ¾ ¼ ½ 2 2½ ½ Length Trade Size Outside Diam..078".28".562".95" 2.29" 2.750".28".82" 4.48" 5.000" 6.29" 7.2" CLOSE Length* Std. Wt. Ctn. Per 00 /8" 2 /8" ½" 4 5 /8" 7 ¾" 0 2" 6 2½" /8" ¾" /8" 2 5 " ulk 7 /8" ulk 05 Rigid Aluminum Conduit Nipples ulk ulk Length ** 9 /6" 5 /8" 2" 2 /6" 2 /6" 2 /8" /8" ¼" /8" ½" ¾" 4" 6" Wt. Per WTCFtgsro_ Weight - lbs. Per 00 Per Ctn ulk ulk 8" ½" 2" 2½" " Std. Wt. Std. Wt. Std. Wt. Std. Wt. Ctn. Per 00 Ctn. Per 00 Ctn. Per 00 Ctn. Per Couplings manufactured to UL Specifications **Minimum dimension per UL 6A. *Length reference is for Close Nipples only ½ ¾ ¼ ½ 2 2½ ½ Std. Ctn. Std. Ctn. Wt. Per 00 Std. Ctn. Standard Carton ulk ulk ulk ulk 0" Wt. Per Std. Ctn ulk ulk Rigid Aluminum Conduit Elbows 90 2" Trade Size ½ ¾ ¼ ½ 2 *2½ * *½ *4 *5 * Radius ** 4" 4½" 5¾" 7¼" 8¼" 9½" 0½" " 5" 6" 24" 0" Offset Fig. 6 /8" 7 7 /6" 9½" /8" 2 /6" 5½" 9¼" 2½" 24½" ½" 7 /6" 49½" Straight Fig. 2 ¾" 2¼" 2¼" " ½" 4" 4¾" 6" 5½" 5¾" 8 /8 ¼" ½" Std. Wt. Ctn. Per ulk ulk *Trade Sizes 2½ and larger shipped in palletized cartons or bulk. Palletized and ulk elbows supplied with a thread protector on each end and UL label affixed. **Minimum dimension per UL 6A Wt. Per 00 Rigid Aluminum Conduit Special Large Radius 90º Elbows Trade Size ¼ ½ 2 2½ ½ " Radius " Radius Standard Radius Weight - lbs. Per 00 Per Ctn " Radius Standard Radius Standard Carton 4" Std. Wt. Ctn. Per " 0" Radius Radius Weight* Each in Lbs Standard Radius 6" Radius " Std. Wt. Ctn. Per ulk 55 ulk " Radius OFFSET Figure STRAIGHT Figure 2 48" Radius *WEIGHTS for Standard and Special Large Radius 90º elbows are approximate. To estimate weight for 60º, deduct 0%; for 45º, deduct; 5% for 0º deduct 20%. Aluminum nipples, elbows and couplings are manufactured in conformance to Underwriters Laboratories, Inc. Standard UL 6A and American National Standards Institute ANSI C

10 D Insulated ushings For Rigid Conduit & IMC Standard ushings Standard Locknuts D Type IC Threaded (NPS) Type IC-S Threadless Set-Screw Features: UL temperature rating 50 C Insulating liner material is UL V-O Rated (self extinguishing) Plastic insulator is tough. It won t chip, crack, swell or shrink. It resists corrosion, chemicals and temperature extremes. Surface friction is so low that wires can be pulled with virtually no abrasion on the cable insulation. Material/Finish Malleable Iron ody/zinc Plated Thermoplastic Insulator UL Listed: E-85 CSA Certified: UL Standard: 54 CSA Standard: C22.2 No. 8 Fed. Spec: W-F-408E NEMA: F- Threaded Trade Size Catalog Dimensions in Inches (inches) Number Max. Dia. Max. Height 2 IC IC IC IC IC IC IC-0 8 IC IC IC IC IC Threadless Trade Size Catalog Dimensions in Inches (inches) Number Max. Dia. Max. Height 2 IC-50S 6 2 IC-75S IC-00S 5 8 IC-S IC-50S IC-200S IC-0S 8 IC-00S IC-50S IC-400S Type IC Threaded Type IC-S Threadless Effective December, 2007 Copyright

11 D6 Standard Conduit Locknuts Threaded For Rigid Conduit & IMC Type Conduit Locknut Standard ushings Standard Locknuts Dia. Trade Size Catalog Threads Across (inches) Number Per Inch Thickness Flats D6 Material: 8 through 6 - Heavy Stock Steel Finish: Zinc Plated Optional Finish: For additional corrosion protection, specify Mechanically Galvanized Contact your local representative for pricing and availability. UL Listed: E-85 CSA Certified: 0570 & S* S S S S S S *Square Style UL Standard: 54 CSA Standard: C22.2 No. 8 Fed. Spec: W-F-408E; NEMA: F- Material: Aluminum UL Listed: E-85 Dia. Trade Size Catalog Threads Across (inches) Number Per Inch Thickness Flats Type Steel & Aluminum CSA Certified: & UL Standard: 54 CSA Standard: C22.2 No. 8 Fed. Spec: W-F-408E NEMA: F- 2-50A A A A A A A A A A A A Effective December, 2007 Copyright

12 EA2 Space-Maker Conduit Hubs Threaded for Rigid Conduit & IMC Type CH & Type CH-T Use: Type CH - General purpose, suitable for use with heavy wall cabinets Rigid Conduit Fittings Dimensions in Inches A Max. Female ox Trade Size Catalog Tapered Wall (inches) Number C NPSM Thick. EA2 Type CH-T - Insulated throat form with bonding screw. Provides a more vibration resistant connection with assured ground continuity Features: Female bushed nipple type Female thread for rigid conduit and IMC Takes less space Recessed O-ring seal outside the box provides a watertight threaded hub on enclosures. Suitable for use with service entrance conduit. Material/Finish: Malleable Iron/Zinc Plated Optional Finish: For additional corrosion protection, specify Mechanically Galvanized Contact your local representative for pricing and availability. UL Listed: E-85 UL Listed as suitable for use in wet locations. CSA Certified: CH CH CH CH CH CH CH CH CH CH CH CH Dimensions in Inches Insulated A Max. Throat Female ox Trade Size Catalog Tapered Wall (inches) Number C NPSM Thick. 2 CH-50T CH-75T CH-00T CH-T CH-50T CH-200T CH-0T CH-00T CH-50T CH-400T CH-500T CH-600T Type CH Type CH-T Suitable for use in hazardous locations as follows: Class I, Div. 2 Class III, Div., 2 Per NEC 50-4(b), 50.0(b)(4), 502-4(a)(2), 50-(a) UL Standard: 54 CSA Standard: C22.2 No. 8 Fed. Spec: W-F-408E NEMA: F- NEMA: F- NEMA: 4 NEMA: 2 Notes: Minimum wall thickness that can be accommodated is 2. Effective December, 2007 Copyright

13 EA Raintight Conduit Hubs Threaded for Rigid Conduit & IMC Rigid Conduit Fittings EA Type CHM & Type CHM-T Use: Type CHM - General Purpose Fitting. Type CHM-T - Insulated Throat form with onding Locknut. Features: Male thread type Tapered female thread for rigid conduit and IMC Recessed O-ring seal assures watertight and dust tight connections Type CHM-T with insulated throat and bonding locknut is suitable for service entrance application Material/Finish: Malleable Iron/Zinc Electroplated Optional Finish: For additional corrosion protection, specify Mechanically Galvanized Contact your local representative for pricing and availability. UL Listed: 85 UL Listed as suitable for wet locations. CSA Certified: Raintight. Suitable for use in hazardous locations as follows: Class I, Div. 2 Class II, Div., 2 Class III, Div., 2 Per NEC 50-4(b), 502-4(a), 50-(a) UL Standard: 54 CSA Standard: C22.2 No. 8 Fed. Spec: W-F-408E NEMA: F- NEMA: 4 NEMA: 2 Note: Minimum wall thickness that can be accommodated is 2. Dimensions in Inches D Female Trade Size Catalog Tapered Max. ox (inches) Number A C N.P.T. Wall Thk. 2 CHM CHM CHM CHM CHM CHM CHM CHM CHM CHM CHM CHM Dimensions in Inches Insulated D Throat Female Trade Size Catalog Tapered Max. ox (inches) Number A C N.P.T. Wall Thk. 2 CHM-50T CHM-75T CHM-00T CHM-T CHM-50T CHM-200T CHM-0T CHM-00T CHM-50T CHM-400T CHM-500T CHM-600T Type CHM Type CHM-T Effective December, 2007 Copyright

14 EA4 Type 4 -piece Coupling Use: Couples conduit when neither can be turned. Rigid Conduit Fittings -Piece Couplings & Offset Nipples Threaded for Rigid Conduit & IMC Trade Size Catalog Overall Max. (inches) Number Length Dia EA4 Features: Threaded (NPS) for rigid conduit and IMC Couples conduits when conduits can not be turned Concretetight Material/Finish: Malleable Iron/Zinc Electroplated Optional Finish: For additional corrosion protection, specify Mechanically Galvanized Contact your local representative for pricing and availability. UL Listed: E-85 CSA Certified: UL Standard: 54 CSA Standard: C22.2 No. 8 Fed. Spec./CID: A-A-5055 ANSI/NEMA: F- Type 4 Type ON Use: Provides box-to-box connection of knockouts. Allows misaligned knockout connection by rolling the offset nipple until aligned with each knockout. Feature: Hub-to-hub offset is. See ody Length in table for distance between boxes. Available with insulated throat. Insulated Dimensions in Inches Throat Thread Trade Size Catalog Catalog ody Length Type (inches) Number Number Length Each End Thread 2 ON-50 ON-50T NPS ON-75 ON-75T NPS ON-00 ON-00T NPS ON- ON-T NPT 2 ON-50 ON-50T 2 NPT 2 ON-200 ON-200T 2 6 NPT Type ON Material/Finish: Malleable Iron/Zinc Electroplated Optional Finish: For additional corrosion protection, specify Mechanically Galvanized. Add suffix G to catalog number. Contact your local representative for pricing and availability. A UL Listed: E-85 CSA Certified: UL Standard: 54 CSA Standard: C22.2 No. 8 Fed. Spec: W-F-408E NEMA: F- Effective December, 2007 Copyright

15 EA5 Rigid Conduit Fittings Hex Reducing ushings & ushed Conduit Nipples Threaded for Rigid Conduit & IMC Type 00R Provided with hex shoulder Use: To reduce a threaded conduit entry into a smaller trade size. Material/Finish: Malleable Iron/Zinc Electroplated UL Listed: E-85 CSA Certified: Dimensions in Inches Max. Dim. Trade Size Catalog Across Thread Flange (inches) Number Corners Length Thickness R R R R R R R R R R R Type 00R EA5 UL Standard: 54 CSA Standard: C22.2 No. 8 Fed. Spec: W-F-408E NEMA: F R R R R R R R R R R R R R R R R Type 7 ushed Conduit Nipples Use: Use through knockout to connect box to conduit coupling. Use with a locknut to connect two boxes side by side or back to back. Use with a locknut to connect fixture housings in continuous runs. Features: Available with Insulated Throat. With rigid conduit threads (NPS) Material/Finish: Malleable Iron/Zinc Electroplated Optional Finish: For additional corrosion protection, specify Mechanically Galvanized Contact your local representative for pricing and availability. UL Listed: E-85 CSA Certified: Effective December, 2007 Copyright 2007 Insulated Dimensions in Inches Throat Max. Dia. Trade Size Catalog Catalog Across Thread Flange (inches) Number Number Corners Length Thickness T T T T T T T T T T T T Not CSA Certified UL Standard: 54 CSA Standard: C22.2 No. 8 Fed. Spec./CID: A-A-5055 ANSI/NEMA: F- Type

16 EA6 Rigid Conduit Fittings 90 ushed & 90 Corner Pull-in Conduit Elbows Threaded For Rigid Conduit & IMC Type 9 Features: Available with insulated throat Threaded for rigid conduit, Female NPT Male NPS Telephone elbow, floor outlet fittings Material/Finish: Malleable Iron/Zinc Electroplated Insulated Throat Trade Size Catalog Catalog Dimensions in Inches (inches) Number Number A C T T T T 7 8 EA6 Optional Finish: For additional corrosion protection, specify Mechanically Galvanized. Contact your local representative for pricing and availability. Type 9 UL Listed: E-85 and 857 CSA Certified: UL Standard: 54 CSA Standard: C22.2 No. 8 Fed. Spec: W-F-408E ANSI/NEMA: F- Type CE Material/Finish: Malleable Iron/Zinc Electroplated UL Listed: E-85 Trade Size Catalog Dimensions in Inches (inches) Number A 2 CE CE CE UL Standard: 54 NEMA: F- Type CE Effective December, 2007 Copyright

17 EA7 Rigid Conduit Fittings 90 Raintight Corner Pulling Ells Threaded For Rigid Conduit & IMC Type FF 90 Female/Female Trade Size Catalog Dimensions in Inches (inches) Number A EA7 Use: Provides a compact wire-pulling point and a 90 change of direction in a conduit run. Features: Threaded for rigid conduit and IMC (NPT) Furnished with Neoprene gasketed steel cover, zinc electroplated. Raintight Material/Finish: Malleable Iron/Zinc Plated UL Listed: E-85 2 FF FF FF FF FF FF FF FF Type FF CSA Certified: UL Standard: 54 CSA Standard: C22.2 No. 8 NEMA: F- Type MF 90 Male/Female Use: For connecting rigid conduit or IMC to box or enclosures. Features: Threaded for rigid conduit and IMC Female NPT, Male NPSM Furnished with neoprene gasketed, steel cover, zinc plated. Furnished with locknut. Raintight Available with insulated throat Material/Finish: Malleable Iron/Zinc Electroplated UL Listed: E-85 Insulated Throat Trade Size Catalog Catalog Dimensions in Inches (inches) Number Number A C 2 MF-050 MF-050T MF-075 MF-075T MF-00 MF-00T MF- MF-T MF-50 MF-50T MF-200 MF-200T MF-0 MF-0T MF-00 MF-00T Type MF CSA Certified: UL Standard: 54 CSA Standard: C22.2 No. 8 NEMA: F- Effective December, 2007 Copyright

18 EA4 Pipe Straps For Rigid Conduit & IMC Type 4-S Use: To support Rigid Conduit and IMC. Features: Snap type - double ribbed Material/Finish: Steel/Zinc Plated Fed. Spec: FF-S-760 Note: 2 2 through 4 sizes also suitable for EMT. Rigid Conduit Fittings Steel Dimensions in Inches Straps Minimum Trade Size Catalog Recommended (inches) Number A C olt Dia S S S S S S S S S S EA4 Type 4-S Type THR Use: To support Rigid Conduit and IMC. Features: Snap type - double ribbed Material/Finish: Steel/Zinc Plated CSA Certified: through 2 sizes only CSA C22.2 No.8 Fed. Spec: FF-S-760 Note: 2 2 through 4 sizes also suitable for EMT. Steel Dimensions in Inches Straps Minimum Trade Size Catalog Recommended (inches) Number A C olt Dia. 2 THR-50S THR-75S THR-00S THR-S THR-50S THR-200S THR-0S THR-00S THR-50S THR-400S Type THR Type 4-G Use: To support Rigid Conduit and IMC. Material/Finish: Malleable Iron/Hot Dipped Galvanized CSA Certified: CSA: C22.2 No.8 Fed. Spec: FF-S-760 Note: 2 2 through 4 sizes also suitable for EMT. Malleable Dimensions in Inches Straps Conduit Minimum Catalog Size Recommended Number Inches A C olt Dia. 4-8G #0 4-G G G G G G G G G G G G G G Type 4-G Effective December, 2007 Copyright

19 EA5 Rigid Conduit Fittings Clamp acks & Conduit Spacers For Rigid Conduit, IMC & EMT EA5 Clamp acks Use: Provides spacing from mounting surface when used with malleable iron pipe straps. Material: Malleable Iron Finish: Hot Dip Galvanized CSA Certified: Trade Size Catalog Dimensions in Inches (inches) Number A C D E 2 4G x 2 42G x 7 6 4G x G x G x G x G x 8 48G x G x G x G x G x 2 Clamp ack CSA Standard: C22.2 No. 8 Conduit Spacers Use: For use with malleable iron pipe straps and clamp back, to provide additional spacing between conduit and mounting surface. Features: Spacers fit snugly under clamp back and makes possible additional spacing away from the mounting surface. Spacers can stack up into each other so that conduit can be installed at any desired distance from walls or ceilings. Materials: Malleable Iron Finish: Hot Dip or Mechanical Galvanized CSA Certified: CSA Standard: C22.2 No. 8 Trade Size Catalog Dimensions in Inches (inches) Number Length Width Thickness 2 4-NG NG NG NG 2 45-NG NG NG NG NG NG Nest ack Fitting Not included Not included Typical Installation Effective December, 2007 Copyright

20 EA6 eam Clamps Rigid Conduit Fittings EA6 Type IS Use: Provides support for conduit hanging systems. Material: Malleable Iron clamp Steel Screw, case hardened Finish: Clamp - Hot Dip Galvanized Screw - Zinc Electroplated A Max. Catalog Tapped Jaw Dimensions in Inches Load Number Holes Opening C D E (lbs.) IS IS IS IS IS Type IS C - Jaw Opening D A - Tapped Holes (2) Load E Effective December, 2007 Copyright

21 EA7 Conduit Clamps Rigid Conduit Fittings EA7 Type UC Right Angle Type UPC Parallel Type UEC Edge type Use: Designed to secure Rigid Conduit, IMC or EMT across, parallel or perpendicular to beam, channel and angle supports. Features: Easily installed Capable of withstanding heavy loads Material: All components are Malleable Iron except nuts and bolts which are steel. Finish: Clamp - Hot Dipped Galvanized Hardware - Mechanically Galvanized Note: Edge type UEC used for rigid conduit only. Type UC-G Right Angle Type Type UPC-G Parallel Type Right Parallel Edge Angle Type Type Type Trade Size Catalog Catalog Catalog (inches) Number Number Number 2 UC-50G UPC-50G UEC-50G UC-75G UPC-75G UEC-75G UC-00G UPC-00G UEC-00G UC-G UPC-G UEC-G 2 UC-50G UPC-50G UEC-50G 2 UC-200G UPC-200G UEC-200G 2 2 UC-0G UPC-0G UEC-0G UC-00G UPC-00G UEC-00G 2 UC-50G UPC-50G 4 UC-400G UPC-400G 5 UC-500G 6 UC-600G Type UEC - G Edge Type Effective December, 2007 Copyright

22 EA8 Conduit U-olts & Hangers For Rigid Conduit, IMC & EMT Type U Conduit U-olts Rigid Conduit Fittings Dimensions in Inches Trade Size Catalog Thread (inches) Number A C D Size EA8 Features: 2 hex nuts Material: Steel Finish: Mechanically Galvanized 2 U-50SG U-75SG U-00SG U-SG U-50SG U-200SG U-0SG U-00SG U-50SG U-400SG U-500SG U-600SG Type U Type H-SS Conduit Hangers with Swing olt and Nut Material/Finish: Steel/Zinc Plated With olt/nut Dimensions in Inches Trade Size Catalog Max. (inches) Number A C olt Size 2 H-0SS H-SS H-2SS H-SS H-4SS H-5SS Type H-SS Type H-WS Conduit Hangers with Carriage olt and Nut Material/Finish: Steel/Zinc Plated With olt/nut Dimensions in Inches Trade Size Catalog Max. (inches) Number A C olt Size 2 H-0WS H-WS H-2WS H-WS H-4WS H-5WS H-6WS Type H-WS H-7WS H-8WS H-9WS Effective December, 2007 Copyright

23 EA9 Conduit Clamps For Rigid Conduit, IMC & EMT Type J Rigid Conduit Fittings EA9 Use: For securing Rigid Conduit, IMC, EMT and Flexible Metal Conduit. D A Material: Malleable Iron Steel olt C Finish: Mechanically Galvanized CSA Certified: CSA Standard: C22.2 No. 8 Dimensions in Inches Trade Size Catalog (inches) Number A C D olt Size 2 J-50G x 2 J-75G x 2 J-00G x 2 J-G x 2 Type J 2 J-50G x 2 2 J-200G x J-0G x J-540G x 2 2 Type CC Conduit C Clamp Use: For securing Rigid Conduit, IMC and EMT. Swivel grip rotates a full 60. Material/Finish: Malleable Iron/Zinc Plated Steel square head screw Optional Finish: Mechanically Galvanized Contact your local representative for pricing, availability and minimum order quantities. Note: CC- maximum beam thickness of when using conduit. 2 CC-2 maximum beam thickness of 8 when using 2 conduit. Trade Size Catalog Dimensions in Inches (inches) Number Length Width CC CC Swivel Grip Type CC Effective December, 2007 Copyright

24 EA20 Rigid Conduit Fittings EA20 Tray-ond Cable Tray Clamps For Rigid Conduit, IMC & EMT Type CTC Use: For connecting and grounding rigid conduit, IMC, or EMT to cable trays. Secures and bonds metal conduit (rigid steel or aluminum, IMC and EMT) to the side rails of steel or aluminum cable trays without drilling or welding the tray. On the 2 through 4 sizes, conduits can attach to the tray from any angle up to 20, allowing large power or control cables to be routed easily. Type CTC-0507 & Type CTC-02 2 Sizes Right Angle to Tray Type CTC-50 & Type CTC Sizes Variable Angle to Tray Features: Fast Installation Low Product Cost Excellent Grounding Continuity Variable Conduit Entry 2-4 sizes High Mechanical Strength Compact Design Meets NEC 8-7 (b)(4) onding Requirements Suggested Specifications: Raceways connected to cable trays shall be properly bonded using UL Listed and CSA Certified bolted mechanical connectors made from malleable iron, hot dip galvanized components and steel, mechanically galvanized bolts. The cable tray conduit clamps shall be O-Z/Gedney, Type CTC. How Tray-ond Clamps Work: The edge of the cable tray rail provides the surface on which the serrations in the clamps grounding pad bite into the tray. The lower portion of the clamp has a sharp triangular edge which grabs the underside of the rail. As the U-bolt is tightened, all the force is concentrated in the clamping jaws thus providing an excellent grounding path and high strength mechanical attachment. Material/Finish: Malleable Iron/Mechanically Galvanized U-olts and Nuts: Steel/Mechanically Galvanized Rigid or IMC, EMT Dimensions in Inches Recommended Trade Size Catalog U-olt & Ins. Torque (inches) Number Nut Size W L T U In. - Lbs. 2 - CTC CTC CTC CTC CTC CTC CTC CTC *Insulated ushing not included Type CTGC Cable Tray Grounding clamps for use on most types of cable trays. See page MA. PATENTED UL Listed: E CSA Certified: for rigid and EMT only UL Standard: 467 CSA Standard: C22.2 No. 8 Effective December, 2007 Copyright

25 LIQUID-TUFF Reduced Wall and Full Wall Flexible Metal Conduit Extra Flexible Conduit Flexcon Extra-Flexible Steel Conduit AFC offers a full range of flexible metal conduits from RW to Full Wall, from EF to extra slinky styles, we have the flexible metal conduit you need. These conduits are made with high-grade galvanized steel or an aluminum alloy strip of uniform gauge for an excellent combination of strength and durability. There are various interlocking designs formed from continuous metal strip for integrity and flexibility. Reduced Wall Conduits 40% lighter (steel) or 66% lighter (aluminum) than heavy-gauge steel. Interior surface allows easy wire fishing. Galvanized steel for superior corrosion resistance. UL conduits with 2-hour (aluminum) and -hour (steel) through-penetration Fire Systems. General purpose applications; OEM applications; and installations in close quarters requiring extra flexibility. Reduced Wall Steel Ordering Information 2 Reduced Wall Aluminum Ordering Information 24 Extra Flexible Ordering Information Flexcon Ordering Information 26 Full Wall Ordering Information 27 8 AFC Cable Systems, Inc. 272 Duchaine lvd., New edford, MA

26 Ordering Information Reduced Wall Flexible Steel Conduit Description Reduced Wall Flexible Steel Conduit High grade hot dipped zinc galvanized low carbon steel Interlocking design Corrosion resistant Applications Flexible metal raceway for electrical power, control and communication cables Motor leads Listed assemblies Listed wire fixtures Manufactured wiring systems Interlocking Steel Armor References & Ratings UL, UL 479, File Reference E8, CSA File Number 505, CSA C22.2 No. 56 (trade size /8 only) Federal Specification WW-C-566C, (now superseded by UL ) NEC 0.8(6), 00.22(C), 48, 40.2, 50.4()(2), Cable Tray installations per NEC Environmental Air-Handling space installation NEC 00.22(C) UL Classified, 2 and -hour Through-Penetration Fire Systems UL File R44 Ordering Information Product Dimensions/ end Radius Approx. Internal External Trade Trade Coil Reel Weight/ Diameter Diameter end Product Size Size Length Length 00 feet (min/max) (min/max) Radius Code (inches) (mm) (feet) (feet) (pounds) inches inches (inches) /8 2 ' / / /8 2 50' / / /8 2 00' / / /8 2 0' / / / ' / / / ' / / /2 6 ' / / /2 6 50' / / /2 6 00' / / / ' / / / ' / / /4 2 ' / / /4 2 50' / / /4 2 00' / / / ' / / / ' / / ' 5.000/ / ' 5.000/ / ' 6.0/ / ' 6.0/ / ' / / ' / / ' / 2.860/ ' /.60/ ' /.860/ ' / 4.60/ NOTE: All dimensions and weights are subject to normal manufacturing tolerances. + CSA certified Review NEC 0.8(6) for grounding requirements. AFC Cable Systems, Inc

27 Armored Cable and Flexible Metal Conduit Connectors Armored Cable * and Flexible Metal Conduit - 90 º Connectors Applications To ground and secure armored cable and flexible metal conduit to boxes and enclosures. Features Furnished with locknut. Male hub threads NPS. Insulated throat version available. Standard Material/Finish Malleable iron/steel/zinc electroplated Certifications and Compliances UL Standard: 54 UL Listed: E48 CSA Standard: C22.2 No. 8. CSA Certified: NEMA: F- Armored Cable * and Flexible Metal Conduit Straight Connectors Applications To ground and secure armored cable and flexible metal conduit to boxes and enclosures. Features Furnished with locknut. Male hub threads NPS. Insulated throat version available Standard Material/Finish Malleable iron/zinc electroplated Certifications and Compliances UL Standard: 54 UL Listed: E48 CSA Standard: C22.2 No. 8. CSA Certified: NEMA: F- Catalog Number 78V, 782V 780V 78VI, 782VI Insulated Throat Catalog Number Flexible Cable Opening Conduit (In./Mm) Size (Inches) /8 0.6/ 780V 780VI (/2 6.0 knockout) 78V 78VI /2 782V 782VI /4 78VI Dimensions in Inches/Millimeters Max. Min. A C 0.94/ 2.9.2/ / / / / 9..50/ 8..69/ /./ / 2.00/ / 2.00/ Weight Lbs./Kgs. Per / / 0..00/ 4.97 Catalog Number Insulated Throat Catalog Number 7265V /8 7480V 7480VI 748V 748VI /2 7482V 7482VI /4 Flexible Cable Opening Conduit (In./Mm) Size (Inches) Dimensions in Inches/Millimeters Max. Min. A C 0.6/ 6.0 /8 0.6/ (/2 6.0 knockout) 0.94/ 2.9.2/ /.9 0./ / / / / 9..50/ 8..69/ / / / /.2.6/ 29.5./ / / 50.8 Weight Lbs./Kgs. Per / / / 0..00/ 4.97 Commercial Products COMMERCIAL PRODUCTS: CORD AND CALE FITTINGS * Select connectors by physical dimensions of cable as dimensions may vary between manufacturers. Not CSA certified Visit our website at or contact us at (800) October 20 70

28 Armored Cable and Flexible Metal Conduit Connectors Flexible Metal Conduit - 90 º Connectors Applications To ground and secure armored cable and flexible metal conduit to boxes and enclosures. Features Furnished with locknut. Male hub threads NPS. Insulated throat version available. Standard Material/Finish Malleable iron/zinc electroplated Certifications and Compliances UL Standard: 54 UL Listed: E484 CSA Standard: C22.2 No. 8. CSA Certified: NEMA: F I I A C COMMERCIAL PRODUCTS: CORD AND CALE FITTINGS Commercial Products Catalog Number Insulated Throat Catalog Number Flexible Conduit Size (Inches) Cable Opening (In./Mm) Dimensions in Inches/Millimeters Weight Lbs./Kgs. Per 00 Max. Min. A C 78 78I.8/5..9/0.2 2./ /2.7 2./ / I -/4.78/ /7. 2.8/ / / / I -/2 2.00/ / / /4.2.50/ / I / / / / / / I 2-/2.00/ / / / / / I.50/88.9.6/ /9.7.06/ / / Visit our website at or contact us at (800) September 200

29 Armored Cable and Flexible Metal Conduit Connectors Flexible Metal Conduit Connectors One Screw and Two Screw Applications To ground and secure flexible metal conduit to boxes and enclosures. Features Furnished with locknut. Male hub threads NPS. Insulated throat version available. Standard Material/Finish Malleable iron/zinc electroplated Certifications and Compliances UL Standard: 54 UL Listed: E484 CSA Standard: C22.2 No. 8. CSA Certified: NEMA: F I I A One Screw Two Screw Catalog Number Insulated Throat Catalog Number Flexible Conduit Size (Inches) Cable Opening (In./mm) Dimensions in Inches/Millimeters Max. Min. ushed Hole Dia. A C C Weight Lbs./Kgs. Per I.8/5..0/ /.4./ /2.7.97/ / I -/4.6/4.4.8/5.2.4/4.0./ /4.2 2./ / I -/2.95/49.5.6/4.4.59/ / / / / I / / / / /9../ / I 2-/2.06/ / / / / / / I.56/90.4.0/ / / / / / I -/2 4./ /95..50/ /6.9.00/.4 5./ / I / / / /68..00/ / /8.44 Commercial Products COMMERCIAL PRODUCTS: CORD AND CALE FITTINGS Visit our website at or contact us at (800) September

30 LIQUID-TUFF LIQUID-TUFF UL Liquidtight Flexible Steel Conduit, Type LFMC Flexible, sleek, and now with improved temperature ratings, Liquid-Tuff Type LFMC (GP) is suitable for use in a variety of environments and applications from general purpose wiring in wet or damp locations, to direct burial and in concrete embedment, to raised computer room floors and site lighting jobs: Liquid-Tuff Type LFMC provides flexibility and moisture protection for general wiring applications. UL bonded liquidtight in sizes /8" through ". NEC requires a grounding conductor pulled in with circuit conductors for liquidtight sizes larger than ". Ordering Information 0 Technical Specifications 29 LIQUID-TUFF Computer lue UL Liquidtight Flexible Metal Conduit, Type LFMC Flexible, sleek, and now with improved temperature ratings, Liquid-Tuff Computer lue is suitable for use in raised computer room floors, exposed or concealed applications for general purpose wiring, direct burial and in concrete embedment. Liquid-Tuff Computer lue provides flexibility and moisture protection. UL bonded liquidtight in sizes /8" through ". NEC requires a grounding conductor pulled in with circuit conductors for liquidtight sizes larger than ". (For installations which do not allow use of PVC, see page 5 for AFC s Type LSZH.) Ordering Information 2 Technical Specifications LIQUID-TUFF Non-UL VF Liquidtight Flexible Steel Conduit, Type LFMC Liquid-Tuff Non-UL VF Liquidtight Flexible Steel Conduit is suitable for use in exposed or concealed applications for general purpose wiring, including commercial and industrial jobs. Very flexible interlocked steel core offers flexibility and ability to perform in vibrating and other types of movement situations. Provides mechanical protection and moisture barrier for conductors inside the raceway. Must use separate grounding conductor, not rated as a grounding means. Ordering Information Technical Specifications 4 AFC Cable Systems, Inc. 272 Duchaine lvd., New edford, MA

31 LIQUID-TUFF Ordering Information LIQUID-TUFF UL Liquidtight Flexible Steel Conduit, Type LFMC Description UL bonded strip /8" " UL Liquidtight all sizes Sunlight resistant Flame retardant PVC jacket Hot dipped zinc galvanized low carbon steel core Available in black, gray, orange, red and yellow Temperature Rating 80 C to -0 C Dry 60 C Wet 70 C Oil resistant Applications 600 volt and lower circuits Direct burial in earth Concrete embedment Suitable for grounding per NEC 0.8(7) Hazardous location per NEC 50 Raised computer room floors per NEC 645.5(D) Service entrance wiring up to 6 feet per NEC 20.4(5) Feeders and services for marina and boat yards Full Engineering Specifications Page 29 LIQUID-TUFF LFMC- UL References & Ratings UL 60, File Reference E26540, CSA Certified File LL559, CSA C22.2 Number 56 NEC 0.8(7), 50, 90.5, 50.4()(2), 502.4(A)()(e), 50.(A)(2), 5.7(A)(), 645.5(D)(2), 680.2, , 695.6(E), 695.4(E) Canadian Electrical Code (CEC) Part I Clause 2-00 UL approved for use in direct burial applications including concrete and earth burial (Sizes /8" through 4") Conduit in sizes 2" and larger requires grounding conductor per NEC 0.8(7) May be installed under raised computer room floors per NEC 645.5(D) Ordering Information Product Dimensions/end Radius Product Trade Trade Coil Reel Approx. Weight/ External Diameter (inches) Internal Diameter end Code Size Size Length Length 00 feet Over Conduit Over Jacket (min/max) Radius lack (inches) (mm) (feet) (feet) (pounds) (min/max) (min/max) inches (inches) K /8 2 00' / / / K /2 6 00' 0.72/ / / K / ' 0.72/ / / K / ' 0.72/ / / K /4 2 00' / / / K / ' / / / K / ' / / / K 27 00' 79.20/ /.5.04/ K 27 00' 79.20/ /.5.04/ K 5 50' 0.540/ / / K 5 200' 0.540/ / / K ' 09.75/ / / K ' 09.75/ / / K ' / / / NOTE: All dimensions and weights are subject to normal manufacturing tolerances. Review NEC 0.8(7) for grounding requirements, conduit sizes 2" and larger. More colors and sizes next page AFC Cable Systems, Inc.

32 Ordering Information LIQUID-TUFF UL Liquidtight Flexible Steel Conduit, Type LFMC LIQUID-TUFF Ordering Information NOTE: All dimensions and weights are subject to normal manufacturing tolerances. Review NEC 0.8(7) for grounding requirements, conduit sizes 2" and larger. Product Dimensions/end Radius Product Trade Trade Coil Reel Approx. Weight/ External Diameter (inches) Internal Diameter end Code Size Size Length Length 00 feet Over Conduit Over Jacket (min/max) Radius Gray (inches) (mm) (feet) (feet) (pounds) (min/max) (min/max) inches (inches) /8 2 00' / / / / ' / / / / ' / / / /8 2 00' / / / /2 6 00' 0.72/ / / / ' 0.72/ / / / ' 0.72/ / / / ' 0.72/ / / /4 2 00' / / / / ' / / / / ' / / / / ' / / / ' 79.20/ /.5.04/ ' 79.20/ /.5.04/ ' 79.20/ /.5.04/ ' 0.540/ / / ' 0.540/ / / ' 0.540/ / / ' 09.75/ / / ' 09.75/ / / ' 09.75/ / / ' / / / ' / / / ' / / / ' / / / ' / / / ' /.5.460/ / ' /.5.460/ / ' / / / ' / / / ' / / / ' / / / Orange OE /2 6 00' 0.72/ / / OE / ' / / / Red RD /2 6 00' 0.72/ / / RD / ' / / / Yellow YW /2 6 00' 0.72/ / / YW / ' / / / AFC Cable Systems, Inc

33 Technical Specifications LIQUID-TUFF UL Liquidtight Flexible Steel Conduit, Type LFMC Page of 2 LIQUID-TUFF Scope This specification covers AFC Cable Systems, Inc. UL LIQUID-TUFF Liquidtight Flexible Steel Conduit designed for use as a raceway for power, control and communication cables in accordance with Article 50 of the National Electrical Code. The product is Underwriters Laboratories Inc. (UL) Listed for 80 C (76 F) in a dry location, 60 C (40 F) in a wet location and 70 C (58 F) in an oily location. It is also UL Listed in all trade sizes for direct burial, outdoor use and sunlight resistance. This LIQUID-TUFF is now UL Listed for 70 C OIL RESISTANT applications. In addition the product is CSA certified for use at 75 C (67 F) in dry and oily locations and for minus C (- F) low temperature applications. This Liquidtight Flexible Steel Conduit is manufactured and tested in accordance with Underwriters Laboratories Inc. Standard UL 60 and CSA International Standard CSA C22.2 Number 56. The product carries the UL Listing Mark and the CSA Certification Mark. Construction The Type UL Liquidtight Flexible Steel Conduit shall be formed from a zinc coated galvanized low carbon steel strip having a uniform width and thickness. The construction shall be in accordance with UL 60 and CSA C22.2 Number 56 requirements. The finished Type LFMC dimensions shall be in accordance with Table 5. of UL 60 and Table 2 of CSA C22.2 No. 56 which are summarized in Table. Jacket A rugged moisture, oil and sunlight resistant polyvinyl chloride (PVC) jacket shall be applied directly over the flexible metal conduit with a wall thickness in accordance with Table 4. of UL 60 and Table 4 of CSA C22.2 No.56 which are summarized in Table 2. Grounding Permanent circuit ground protection is provided through the continuous copper bonding strip built into the conduit core in sizes /8" through ". A separate grounding conductor is required by the NEC for trade sizes 2" and larger. The Canadian Electric Code requires a grounding conductor for all trade sizes of Liquidtight Flexible Metal Conduit. Ordering Information Page 0 Reference Standards UL 60 CSA C22.2 No. 56 Standard for Liquidtight Flexible Steel Conduit Standard for Flexible Metal Conduit and Liquidtight Flexible Metal Conduit File Reference(s): UL E26540; CSA 559 NEC Articles: 0.02, 0-8(7), 0.4(), 50, 90.5, 50.4()(2), 502.4(A)()(e), 50.(A)(2), 5.7(A)(), 645.5(D)(2), 680.2, , 695.6(E) and 695.4(E) Department of Defense Adopted UL 60 on October, 987 Markings LIQUID-TUFF LFMC- UL The surface of the outer jacket shall be clearly marked with a legible print legend in compliance with UL 60 and CSA C22.2 No. 56. Performance Tests In accordance with UL 60 and CSA C22.2 No. 56, the completed UL LIQUID-TUFF Liquidtight Flexible Steel Conduit shall meet all of the performance requirements outlined in Appendix A. AFC Cable Systems, Inc. 272 Duchaine lvd., New edford, MA

34 LIQUID-TUFF Technical Specifications LIQUID-TUFF UL Liquidtight Flexible Steel Conduit, Type LFMC Page 2 of 2 Table 2 Jacket Thickness Conduit Trade Minimum Acceptable Average Trade Size Metric Designator Thickness of Jacket, (inches) / / / Appendix A UL Performance Tests Resistance and High Current Fault Current Impact Tension Crushing Pipe Stiffness Flexibility Zinc Coating Vertical Flame Physical Properties Deformation Mechanical Water Absorption Moisture Penetration Sunlight Resistance Test for Secureness of Fittings Test for Durability of Ink Printing CSA Performance Tests Physical Properties Original Tensile and Elongation Air Oven Aging Test Oil Immersion Test Deformation Test Tension Zinc Coating Low Temperature Flexibility Vertical Flame Cold Impact Pinhole Test Compatibility with Connectors Table Conduit Diameters Acceptable Internal and External Diameters Conduit Size Internal Over Over Trade Metric Diameter, In. Conduit, In. Jacket, In. Size, In. Designator Min. Max. Min. Max. Min. Max. / / / AFC Cable Systems, Inc. 272 Duchaine lvd., New edford, MA

35 GA Liquidtight Fittings Liquidtight Connectors GA Type 4Q - Straight Use: To secure, ground and seal Liquidtight Flexible Metal Conduit, Type LFMC, to boxes and enclosures. Features: Tapered threaded male hub NPT Compact, slim diameter with small turning radius Furnished with locknut and sealing ring. Liquidtight/Raintight/Oiltight/Concretetight UL Listed NEMA Type 4 when installed into a NPT threaded entry or UL Listed conduit hub (sizes 2 and larger require thread sealant). Suitable for grounding through 4 Trade Size per NEC Section 0.8(7) For Trade Sizes 4 and larger, an internal or external equipment bonding conductor is required. See 4Q-L Series with external ground lug in Catalog Section G. Suitable for use in the following Hazardous Locations: Class I, Div. 2 per NEC 50.4() Class I, Zone 2 per NEC 505.5(C)(2) Class II, Div. per NEC 502.4(A)()(e) Class II, Div. 2 per NEC 502.4()(2) Class III, Div. per NEC 50.(A)(2) Class III, Div. 2 per NEC 50.() Intrinsically Safe per NEC onding Wedge Locknuts are recommended in Hazardous Locations. See 0 Series on Page D8. Suitable for wet locations Long ferrule prevents pullout and tight bend conduit pop-out Inspection windows in ferrule to ensure full engagement See Page GC4 for our patented Ferrule Wrench which makes ferrule installation easy. Material/Finish: Malleable Iron ody and Nut, Zinc Electroplated. Steel Ferrule, Zinc Electroplated. Optional Finish: Available Hot Dip/Mechanically Galvanized, See 4Q-TG Series in Catalog Section GC. Type 4Q-8 Type 4Q-200 Type 4Q-0 Type 4Q-600 Insulated Throat Trade Size Catalog Catalog Dimensions in Inches (inches) Number Number A C 8 ( 2 KO) 4Q-8 4Q-8T Q-50 4Q-50T Q-75 4Q-75T Q-00 4Q-00T Q- 4Q-T Q-50 4Q-50T Q-200 4Q-200T Q-0 4Q-0T Q-00 4Q-00T Q-50 4Q-50T Q-400 4Q-400T Q-500 4Q-500T Q-600 * 4Q-600T * UL Listing not applicable *CSA Certification not applicable UL Listed: 85 CSA Certified: 9795 UL Standard: 54 CSA Standard: C22.2 No. 8 NEMA: F- Federal Spec: W-F-406E Effective November, 2005 Copyright

36 GA2 Liquidtight Fittings Liquidtight Connectors GA2 Type 4Q - 45 & 90 Use: To secure, ground and seal Liquidtight Flexible Metal conduit, Type LFMC, to boxes and enclosures. Features: Tapered threaded male hub NPT Compact, slim diameter with small turning radius. Furnished with locknut and sealing ring. Liquidtight/Raintight/Oiltight/Concretetight UL Listed NEMA Type 4 when installed into a NPT threaded entry or UL Listed conduit hub (sizes 4 and larger require thread sealant). Suitable for grounding through 4 Trade Size per NEC Section 0.8(7) For Trade Sizes 2 and larger, an internal or external equipment bonding conductor is required. See 4Q-L Series with external ground lug in Catalog Section G. Suitable for use in the following Hazardous Locations: Class I, Div. 2 per NEC 50.4() Class I, Zone 2 per NEC 505.5(C)(2) Class II, Div. per NEC 502.4(A)()(e) Class II, Div. 2 per NEC 502.4()(2) Class III, Div. per NEC 50.(A)(2) Class III, Div. 2 per NEC 50.() Intrinsically Safe per NEC onding Wedge Locknuts are recommended in Hazardous Locations. See 0 Series on Page D8. Suitable for wet locations. Long ferrule prevents pullout and tight bend conduit pop-out. Inspection windows in ferrule to ensure full engagement. See Page GC4 for our patented Ferrule Wrench which makes ferrule installation easy. Material/Finish: Malleable Iron ody and Nut, Zinc Electroplated. Steel Ferrule, Zinc Electroplated. Optional Finish: Available Hot-Dip/Mechanically Galvanized, See 4Q-TG Series in Catalog Section GC. UL Listed: 85 CSA Certified: 9795 UL Standard: 54 CSA Standard: C22.2 No. 8 NEMA: F- Federal Spec: W-F-406E Effective November, 2005 Copyright 2005 Type 4Q-48 Type 4Q-4200 Type 4Q-40 Type 4Q-4500 Insulated Throat Dimensions in Inches Trade Size Catalog Catalog C (inches) Number Number A Dia. 8 ( 2 KO) 4Q-48 4Q-48T Q-450 4Q-450T Q-475 4Q-475T Q-400 4Q-400T Q-4 4Q-4T Q-450 4Q-450T Q Q-4200T Q-40 4Q-40T Q-400 4Q-400T Q Q-4400T Q Q-4500T UL Listing not applicable Type 4Q-98 Type 4Q-9200 Type 4Q-90 Type 4Q-9500 Insulated Throat Trade Size Catalog Catalog Dimensions in Inches (inches) Number Number A C D 8 ( 2 KO) 4Q-98 4Q-98T Q-950 4Q-950T Q-975 4Q-975T Q-900 4Q-900T Q-9 4Q-9T Q-950 4Q-950T Q Q-9200T Q-90 4Q-90T Q-900 4Q-900T Q Q-9400T Q Q-9500T UL Listing not applicable D C A

37 GA Liquidtight Fittings Liquidtight Connectors GA Type 4Q-FM - Combination Couplings Use: Secures, grounds and seals liquidtight flexible metal conduit to threaded rigid conduit and IMC. Features: Female hub, NPT for connection to threaded conduit Liquidtight/Raintight/Oiltight/Concretetight UL Listed NEMA Type 4 when installed into a NPT threaded entry or UL Listed conduit hub (sizes 4 and larger require thread sealant). Suitable for grounding through 4 Trade Size per NEC Section 0.8(7) For Trade Sizes 2 and larger, an internal or external equipment bonding conductor is required. See 4Q-L Series with external ground lug in Catalog Section G. Suitable for use in the following Hazardous Locations: Class I, Div. 2 per NEC 50.4() Class I, Zone 2 per NEC 505.5(C)(2) Class II, Div. per NEC 502.4(A)()(e) Class II, Div. 2 per NEC 502.4()(2) Class III, Div. per NEC 50.(A)(2) Class III, Div. 2 per NEC 50.() Intrinsically Safe per NEC onding Wedge Locknuts are recommended in Hazardous Locations. See 0 Series on Page D8. Suitable for wet locations Long ferrule prevents pullout and tight bend conduit pop-out Inspection windows in ferrule to ensure full engagement See Page GC4 for our patented Ferrule Wrench which makes ferrule installation easy. Type 4Q-8FM Type 4Q-200FM Trade Size Catalog Dimensions in Inches (inches) Number A C 8 ( 2 KO) 4Q-8FM Q-50FM Q-75FM Q-00FM Q-FM Q-50FM Q-200FM Q-0FM Q-00FM Q-50FM Q-400FM Q-500FM UL Listing not applicable Type 4Q-0FM Type 4Q-500FM Material/Finish: Malleable Iron/Zinc Plated Steel Ferrule/Zinc Plated Optional Finish: Hot Dip or Mechanical Galvanize, add suffix G to catalog number. Contact your local representative for pricing and availability. UL Listed: 85 CSA Certified: 9795 UL Standard: 54 CSA Standard: C22.2 No. 8 NEMA: F- Federal Spec: W-F-406E Effective November, 2005 Copyright

38 GA4 Liquidtight Connectors Liquidtight Connectors & Sealing Ring Assemblies With Wire Mesh Grips & Insulated Throats Type 4Q-WM Use: To secure, ground and seal liquidtight flexible metal conduit to enclosures and prevent conduit pull-out when subject to motion or strain. Features: Tapered threaded male hub NPT Furnished with locknut and sealing ring Provided with insulated throat Wire mesh prevents pull-out and tight end conduit pop-out Liquidtight/Raintight/Oiltight/Concretetight UL Listed NEMA Type 4 when installed into a NPT threaded entry or UL Listed conduit hub (sizes 4 and larger require thread sealant). Suitable for grounding through 4 Trade Size per NEC Section 0.8(7) For Trade Sizes 2 and larger, an internal or external equipment bonding conductor is required. See 4Q-L Series with external ground lug in Catalog Section G. Suitable for use in the following Hazardous Locations: Class I, Div. 2 per NEC 50.4() Class I, Zone 2 per NEC 505.5(C)(2) Class II, Div. per NEC 502.4(A)()(e) Class II, Div. 2 per NEC 502.4()(2) Class III, Div. per NEC 50.(A)(2) Class III, Div. 2 per NEC 50.() Intrinsically Safe per NEC onding Wedge Locknuts are recommended in Hazardous Locations. See 0 Series on Page D8. Trade Size Catalog Dimensions in Inches (inches) Number A C D 8 4Q-8WM Q-50WM Q-75WM Q-00WM Q-WM Q-50WM Q-200WM Q-0WM Q-00WM Q-400WM Suitable for wet locations Inspection windows in ferrule to ensure full conduit engagement Stainless steel single weave design Material: Malleable Iron ody and Nut, Zinc Electroplated. Steel Ferrule, Zinc Electroplated. Stainless Steel Wire Mesh Optional Features: Consult your local representative for 45, 90, FM and L (Ground-Tite style) applications Type 4Q-WM UL Listed: E-85 CSA Certified: 9795 UL Standard: 54 CSA Standard: C22.2 No. 8 NEMA: F- Federal Spec: W-F-406E GA4 Type 4Q-G Liquidtight Sealing Ring Assemblies Use: Provides a positive seal between shoulder of fitting and enclosure Material/Finish: Steel Retaining Ring/Zinc Electroplated Neoprene Gasket Trade Size (inches) Catalog Number 8 ( 2 KO) 4QG-50* 2 4QG QG-75 4QG QG- 2 4QG QG QG-0 4QG QG QG QG-500 Type 4Q-G *May be used with 8 trade size fittings with 2 hub size. Effective November, 2005 Copyright

39 Wheatland Tube Company Electrical Metallic Tubing - Steel 900 Haddon Avenue Collingswood, NJ WEIGHTS AND DIMENSIONS Trade Size Metric Designator Weight 0 Unit Lengths Outside Diameter() Inside Diameter(2) Wall Thickness(2) lb k g in. m m in. m m in. mm / / / / / / Notes : Applicable tolerances PACKAGING Length: 0 Ft. (.05 m) +/- /4 in. (+/- 6.5 mm) () Outside Diameter: /2-2 +/ in. (6-5 +/- 0.mm), 2-/2 +/ in. (6 +/- 0. mm), +/ in. (78 +/- 0.8 mm), -/2-4 +/ in. (9-0 +/- 0.5 mm). (2) For information only, not a UL 797 requirement. Trade Size Metric Designator undle Tape Color Quantity Per undle Quantity Per Lift Weight Per Lift Volume Per Lift Feet Meters Pieces undle s Feet Meters Pounds K ilograms Cu. Ft. Cu. m / 2 6 lack / 4 2 Red lue / 4 5 Red / 2 4 lack / / The quantity per Lift conforms to the National Electrical Manufacturers Association Standards Publication RN-2 Packaging of Master undles for Steel Rigid Conduit, Intermediate Metal Conduit (IMC), and Electrical Metallic Tubing. EMT_Spec_Sheet_2002.p65

40 Wheatland Tube Company 2 EMT Elbows 90º Trade Size ½ ¾ ¼ ½ 2 2½* * ½* 4* Min. UL Radius (in.) 4 4½ 5¾ 7¼ 8¼ 9½ 0½ 5 6 Offset 6¼ 7 / 6 9¼ 0½ 2 5 / 8 4¼ 8 7 / ¾ 26 / 8 Weight lbs.** Per 00 Per Ctn Std. Carton Qty *Trade sizes 2½ and larger shipped in palletized cartons or bulk. **Weights for Standard 90º elbows shown above are approximate. To estimate weight for 60º, deduct 0%; for 45º, deduct 5%; for 0º, deduct 20%. Underwriters Laboratories, Inc. UL 797, American National Standards Institute, C80.. Rigid/IMC Couplings - Galvanized Steel Trade Size ½ ¾ ¼ ½ 2 2½ ½ Outside Diameter Manufactured to UL Specifications. *Minimum dimensions per UL 6. Length* (in.) 5 / 8 4 / 64 / 2 2 / 2 2 / 6 2 / 8 / 6 5 / 6 / 2 / 64 6 / 64 4 / 4 Weight lbs. Per 00 Per Ctn ulk ulk Std. Carton Qty ulk ulk OFFSET STRAIGHT Rigid Steel Conduit Running Thread Pipe Trade Size / 8 ¼ / 8 ½ ¾ ¼ ½ 2 2½ ½ 4 Feet Per Carton 02' 02' 02' 60' 75' 60' 6' 0' 24' 2' 9' 6' 6' Weight lbs. Per 00 Ft. Per Ctn Foot Lengths: TYPE C Galvanized, Electro Plated Threads Rigid Steel Conduit- Galvanized Elbows 90º Trade Size ½ ¾ ¼ ½ 2 2½* * ½* 4* 5* 6* Min. UL Radius (in.) 4 4½ 5¾ 7¼ 8¼ 9½ 0½ Offset Fig. 6 / / 6 9½ / 8 2 / 6 5½ 9¼ 2½ 24½ ½ 7 / 6 49½ Figure Straight Fig. 2 ¾ 2¼ 2¼ ½ 4 4¾ 6 5½ 5¾ 8 / 8 ¼ Weight lbs.** Per 00 Per Ctn ulk ulk Figure 2 Std. Carton Qty ulk ulk *Sizes 2½ and larger shipped in palletized cartons or bulk.palletized and ulk elbows supplied with a thread protector on each end and UL label affixed. **Weights for Standard 90º elbows shown above are approximate. To estimate weight for 60º, deduct 0%; for 45º, deduct 5%; for 0º, deduct 20%.

41 Wheatland Tube Company Wheatland Galvanized Electrical Metallic Tubing (EMT) -Steel General Steel Electrical Metallic Tubing is manufactured from mild steel tube. It has an accurate circular cross section, a uniform wall thickness, a defect free interior surface, and continuously welded seams. The exterior surface is thoroughly and evenly coated with zinc using an inline galvanizing process, so that metal-tometal contact and galvanic protection against corrosion are provided. Additionally, the exterior is protected by a clear zinc chromate coating. The interior surface is coated with organic lubricating coating to reduce friction during wire insertion and retard corrosion. Wheatland s EMT and its associated tubular fittings are produced in nominal trade sizes from /2 to 4. EMT is produced in standard lengths of 0 feet (.05 m). undles of finished EMT are wrapped with color coded special light weight filament tape. lack tape identifies trade sizes /2 and /2, Red tape identifies /4 and /4, and lue tape. Trade sizes 2 and larger are not bundled. Wheatland EMT is a UL Listed product. Each length of tubing has a label affixed containing UL Listing information and a bar code. Each length is identified with Wheatland s name, Logo, the letters EMT clearly and durably marked once per 0 foot (.05 m) length, a U.L. listing number and the words, Consult manufacturer for installation instructions. On July, 200 the past UL requirement to embed the letters EMT into the surface of the tube was changed to require only durably marking the tube with the letters EMT at a minimum of /8 inch ( mm) high. Applications Wheatland Galvanized Steel Electrical Metallic Tubing, National Electrical Code (NEC ) 2002 Article 58, can be installed indoors or outdoors, in dry or wet locations, exposed or concealed, in all kinds of atmospheric conditions, and in hazardous locations, when in accordance with NEC 502.4, 50. and and providing it will not be subject to sever physical damage during and after installation and is properly protected against corrosion. Also, it provides mechanical protection for the conductors while reducing Electro- Magnetic Field (EMF) exposure and shielding against Electro-Magnetic Interference (EMI). Galvanized Steel Electrical Metallic Tubing is an approved equipment grounding conductor under the 2002 NEC Section 0.8(4). The NEC establishes the minimum requirements for a safe electrical installation. ecause of the varied environments in which electrical equipment is installed, local amendments are often added. Always consult local codes prior to any installation. 900 Haddon Avenue Collingswood, NJ Specifications Wheatland Galvanized Steel Electrical Metallic Tubing is manufactured in accordance with the latest edition of the following: American National Standards Institute - American National Standard for Steel Electrical Metallic Tubing (EMT), ANSI C80. Underwriters Laboratories Standard for Electrical Metallic Tubing - Steel, UL 797 National Electric Code Article 58 (999 NEC Article 48) Federal Specification - WW-C-56 The above Federal specification may still be referenced, however the federal government has canceled it and adopted the UL 767 and ANSI C80. standard and will no longer maintain a separate standard. Electrical Metallic Tubing was covered under WW-C-56. Additional information on the titles and designations of standards or requirements that have been used for the investigation of products in a specific category can be found in the Underwriters Laboratories Inc., General Information for Electrical Equipment Directory. The UL product category for EMT is FJMX. Made in U.S.A. Certificate Numbers: Wheatland, PA Chicago, IL Little Rock, AR EMT_Spec_Sheet_2002.p65

42 FA ETP FA Set Screw EMT Fittings EMT Steel Set-Screw Connectors & Couplings Type 4000 Connectors Use: To ground and secure EMT raceway to boxes and enclosures. Features: Heavy steel walls Concretetight when taped Pre-set/Pre-staked set screws Male hub threads NPS Available with insulated throat Three-way combination screws for flatblade, philips and square head screwdrivers /2" through 2" Slotted hexhead screws 2 /2" through 4" 2 /2" through 4" also rated for threadless steel RMC. Insulated throat connector rated 90ºC Material/Finish: Steel/Zinc Electroplated UL Listed: E-4895 ( /2" to 2") UL Listed: E-85 (2 /2" to 4") UL Standard: 54 CSA Standard: C22.2 No. 8 NEMA: F- Federal Spec: W-F-408E Insulated Throat Dimensions in Inches Trade Size Catalog Catalog ody Thread (inches) Number Number Length Dia. Length /2 4050S 4050ST /2 27 /2 7 /6 /4 4075S 4075ST /2 5 /64 7 /6 400S 400ST /6 5 /6 7 /6 /4 4S 4ST /4 /6 9 /6 /2 450S 450ST 5 /6 5 /6 9 / S 4200ST 2 /6 2 /8 5 /8 2 /2 40S 40ST 2 5 /2 7 /6 7 /8 400S 400ST 2 /2 4 7 /8 /2 450S 450ST 2 /2 4 / S 4400ST 2 9 /6 5 /6 Type 4S Type 4200S Type 4050S Type 400S Type 40S Type 4400S Type 5000 Couplings Use: To ground and secure EMT raceway sections together. Features: Heavy steel walls Concretetight when taped Pre-set/pre-staked set screws Three-way combination screws for flatblade, philips and square head screwdrivers /2" through 2" Slotted hexhead screws 2 /2" through 4" 2 /2" through 4" also rated for threadless steel RMC. Material/Finish: Steel/Zinc Electroplated UL Listed: E-4895 ( /2" to 2") UL Listed: E-85 (2 /2" to 4") UL Standard: 54 CSA Standard: C22.2 No. 8 NEMA: F- Federal Spec: W-F-408E Effective September, 2008 Copyright 2008 Trade Size Catalog Dimensions in Inches (inches) Number ody Length Dia. /2 5050S /4 27 /2 /4 5075S /6 5 /64 500S 7 /8 5 /6 /4 5S /4 /6 /2 550S /4 5 / S 4 2 /8 2 /2 50S 5 /8 /8 500S 5 /8 / 4 /2 550S /6 4 / S 4 4 /4 Type 5S Type 5200S Type 5050S Type 500S Type 50S Type 5400S

43 FA2 ETP FA2 Set Screw EMT Fittings - Made in the USA EMT Steel Set-Screw Connectors & Couplings Type 4000US Connectors Features: Concretetight when taped Pre-set/Pre-staked set screws Male hub threads NPS Available with insulated throat Combination screws /2" through 2" Hexhead screws 2 /2" through 4" 2 /2" through 4" rated for threadless aluminum RMC and steel IMC. Material/Finish: Steel/Zinc Plated /2" through 2" Malleable Iron/Zinc Plated 2 /2" through 4" UL Listed: E-4895 Insulated Trade Throat Dimensions in Inches Size Catalog Catalog ody Max Thread (inches) Number Number Length Dia. Length /2 4050US 4050UST -5/2 /8 /4 4075US 4075UST -7/2-7/2 /2 400US 400UST -/2 -/2 7/6 /4 4US 4UST -/6-29/2 /2 /2 450US 450UST -29/2 2-5/2 7/ US 4200UST 2 2-2/2 9/2 2 /2 40US 40UST 2-5/8 -/4 -/4 400US 400UST -/6 4-9/6 -/8 /2 450US 450UST -/6 5-/6 -/ US 4400UST -/2 5-2/2 -/2 Made in the USA Type 4050US Type 4200US UL Standard: 54 CSA Standard: C22.2 No. 8 NEMA: F- Federal Spec: W-F-408E Type 40US Type 4400US Type 5000US Couplings Features: Concretetight when taped Pre-set/pre-staked set screws Combination screws /2" through 2" Hexhead screws 2 /2" through 4" Material/Finish: Steel/Zinc Plated /2" through 2" Malleable Iron/Zinc Plated 2 /2" through 4" UL Listed: E-4895 Trade Size Catalog Dimensions in Inches (inches) Number ody Length Dia. /2 5050US -/2 7/8 /4 5075US -/2 -/8 500US -7/8 -/2 /4 5US 2-/6 -/4 /2 550US 2-9/2 2-/ US 2-/6 2-/2 2 /2 50US 2-/4-5/6 500US -/8 4-9/6 /2 550US -5/2 5-/ US -/8 5-2/2 Made in the USA Type 5050US Type 5200US UL Standard: 54 CSA Standard: C22.2 No. 8 NEMA: F- Federal Spec: W-F-408E Type 50US Type 5400US Effective August, 2008 Copyright

44 F ETP Compression EMT Fittings EMT Steel Compression Connectors & Couplings Type 7000S Connectors Use: To ground and secure EMT raceway to boxes and enclosures. Insulated Throat Dimensions in Inches Trade Size Catalog Catalog ody Max Thread (inches) Number Number Length Dia. Length /2 7050S 7050ST /8 /6 /8 F Features: Male hub threads NPS Available with insulated throat Concretetight 2 /2" through 4" also rated for threadless steel RMC. Insulated throat connector rated 90ºC Material: Steel ody & Nut Finish: Zinc Electroplated UL Listed: E-4895 ( /2" to 2") UL Listed: E-85 (2 /2" to 4") /4 7075S 7075ST /2 /4 7 /6 700S 700ST /4 9 /6 9 /6 /4 7S 7ST /6 2 9 /6 /2 750S 750ST 2 2 /6 9 / S 7200ST 2 /4 2 /6 /6 2 /2 70S 70ST 2 /8 /2 7 /8 700S 700ST 2 7 /8 4 7 /8 /2 750S 750ST 4 / S 7400ST /6 5 /6 Type 7050S Type 7400S UL Standard: 54 CSA Standard: C22.2 No. 8 NEMA: F- Federal Spec: W-F-408E Type 6000S Couplings Use: To ground and secure EMT raceway sections together. Features: Concretetight 2 /2" through 4" also rated for threadless steel RMC. Material: Steel ody & Nut Finish: Zinc Electroplated UL Listed: E-4895 ( /2" to 2") UL Listed: E-85 (2 /2" to 4") Trade Size Catalog Dimensions in Inches (inches) Number ody Length Max. Dia. /2 6050S /8 27 /2 /4 6075S /2 /8 600S 2 /2 5 /6 /4 6S 2 /2 /6 /2 650S 2 /2 5 / S 2 /2 2 /8 2 /2 60S 4 /4 /8 600S 4 /2 /4 /2 650S 4 /4 4 / S 5 4 /4 Type 6050S Type 6400S UL Standard: 54 CSA Standard: C22.2 No. 8 NEMA: F- Federal Spec: W-F-408E Effective September, 2008 Copyright

45 F2 ETP Compression EMT Fittings - Made in the USA EMT Steel Compression Connectors & Couplings Type 7000US Connectors Features: Male hub threads NPS Available with insulated throat Concretetight Material/Finish: Steel/Zinc Plated /2" through 2" Malleable Iron/Zinc Plated 2 /2" through 4" UL Listed: E-4895 UL Standard: 54 CSA Standard: C22.2 No. 8 NEMA: F- Federal Spec: W-F-408E Insulated Trade Throat Dimensions in Inches Size Catalog Catalog ody Max Thread (inches) Number Number Length Dia. Length /2 7050US 7050UST -/6 /2 /8 /4 7075US 7075UST -/8-7/2 /2 700US 700UST -/4 -/2 7/6 /4 7US 7UST -7/6-29/2 /2 /2 750US 750UST -9/6 2-5/2 7/ US 7200UST -/6 2-/6 9/2 2 /2 70US 70UST 4-/6 4-/8 -/4 700US 700UST 4-/8 4-/6 -/8 /2 750US 750UST 4-/4 5-/2 -/ US 7400UST 4-/2 5-7/8 -/2 F2 Made in the USA Type 7050US Type 7200US Type 70US Type 7400US Type 6000US Couplings Features: Concretetight Material/Finish: Steel/Zinc Plated /2" through 2" Malleable Iron/Zinc Plated 2 /2" through 4" UL Listed: E-4895 UL Standard: 54 CSA Standard: C22.2 No. 8 NEMA: F- Federal Spec: W-F-408E Trade Size Catalog Dimensions in Inches (inches) Number ody Length Max. Dia. /2 6050US -/2 /2 /4 6075US -/2-7/2 600US -/2 -/2 /4 6US -/4-29/2 /2 650US -7/8 2-5/ US 2-/8 2-/6 2 /2 60US 5-/2 4-/8 600US 5-/2 4-/6 /2 650US 5-5/8 5-/ US 5-/4 5-7/8 Made in the USA Type 6050US Type 6200US Type 60US Type 6400US Effective August, 2008 Copyright

46 F ETP F Compression EMT Fittings UL Listed Raintight EMT Steel Compression Connectors & Couplings Type 7000SR Raintight Connectors Use: To ground and secure EMT raceway to boxes and enclosures in wet locations. Features: UL Listed Raintight InspectoRidgeª external visual inspection aid See below No disassembly required Male hub threads NPS Available with and without insulated throat Concretetight Insulated Throat Dimensions in Inches Trade Size Catalog Catalog ody Max Thread (inches) Number Number Length Dia. Length /2 7050SR 7050SRT 29 /2 5 /2 7 /6 /4 7075SR 7075SRT /2 /8 7 /6 700SR 700SRT 2 /8 /4 5 /2 /4 7SR 7SRT 2 /6 2 5 /2 7 /2 /2 750SR 750SRT 2 /2 2 7 /6 9 / SR 7200SRT / /2 2 /2 UL Listed: E-4895 Listed Raintight Type 7050SR Type 7200SR Material/Finish: Steel ody & Nut Zinc Electroplated Silicone Rubber Internal Sealing Ring EPDM Rubber KO Sealing Ring UL Standard: 54 NEMA: F- Federal Spec: W-F-408E Type 6000SR Raintight Couplings Use: To ground and secure EMT raceway sections together in wet locations. Features: UL Listed Raintight InspectoRidgeª external visual inspection aid A See below No assembly required Material/Finish: Steel ody & Nut Zinc Electroplated Silicone Rubber Internal Sealing Rings Trade Size Catalog Dimensions in Inches (inches) Number ody Length Max. Dia. /2 6050SR 2 /2 /8 /4 6075SR /2 600SR /2 5 /8 /4 6SR /6 2 /2 650SR 2 /2 2 9 / SR 4 /8 2 /4 UL Listed: E-4895 Listed Raintight UL Standard: 54 NEMA: F- Federal Spec: W-F-408E Type 6050SR Type 6200SR InspectoRidge Provides external visual inspection aid on outside surface, to assure raintight fittings are installed, without disassembly of conduit run. Effective December, 2007 Copyright

47 Schedule 40 Conduit - ell End Meets specifications UL 65 and NEMA TC 2 Rated for 90 C Cable Sunlight Resistant 0 Lengths Schedule 40 Conduit elled End 0 Lengths Part No. Size O.D. I.D. Min. Wall ell Depth Approx. Wt/Ft Feet per Pack A52AE2 / ,000 A52AE2H / ,000 A52AG2 / ,400 A52AG2H / ,200 A52A ,600 A52A2H ,800 A52C2 -/ ,00 A52C2H -/ ,650 A52E2 -/ ,0 A52E2H -/ ,0 A52CA ,400 A52CE2 2-/ A52DA A52DE2 -/ A52EA A52FA A52GA A52JA2 * * Non UL Note: 20 length available on request Schedule 40 conduit complies with federal and military specifications by conforming to UL 65. CANTEX INC. 0 Commerce Ste Fort Worth, Texas Fax:

48 Schedule 80 Conduit - ell End Meets specifications UL 65 and NEMA TC 2 Rated for 90 C Cable Sunlight Resistant 0 Lengths Schedule 80 Conduit elled End 0 Lengths Part No. Size O.D. I.D. Min. Wall ell Depth Approx. Wt/Ft Feet per Pack A5AE2 / ,000 A5AE2H / ,000 A5AG2 / ,400 A5AG2H / ,200 A5A ,600 A5A2H ,800 A5C2 -/ ,00 A5C2H -/ ,650 A5E2 -/ ,0 A5E2H -/ ,0 A5CA ,400 A5CE2 2-/ A5DA A5EA A5FA A5GA Note: 20 length available on request CANTEX INC. 0 Commerce Ste Fort Worth, Texas Fax:

49 Schedule 40 & 80 Fittings Couplings Female Adapters PART STD. UPC-ITF PKG. NO. SIZE PKG WT 6462 / / / / / / *6465D PART STD. UPC-ITF PKG. NO. SIZE PKG WT / / / / / / *540055D Terminal Adapters PART STD. UPC-ITF PKG. NO. SIZE PKG WT / / / / / / *5405D * Not UL Listed

50 Schedule 40 Standard Radius Elbows 90 Elbows Plain End 45 Elbows Plain End 0 Elbows Plain End 22-/2 Elbows Plain End PART STD. UPC-ITF PKG. NO. SIZE PKG WT. 582 / / / / / / * * PART STD. UPC-ITF PKG. NO. SIZE PKG WT. 576 / / / / / / * * PART STD. UPC-ITF PKG. NO. SIZE PKG WT / / / / / / * * PART STD. UPC-ITF PKG. NO. SIZE PKG WT / / / / * * *Pallet quantities 7

51 Schedule 40 Standard Radius Elbows 90 Elbows ell End 45 Elbows ell End PART STD. UPC-ITF PKG. NO. SIZE PKG WT / / / / / / * * PART STD. UPC-ITF PKG. NO. SIZE PKG WT / / / / / / * * Elbows ell End PART STD. UPC-ITF PKG. NO. SIZE PKG WT / * * /2 Elbows ell End PART STD. UPC-ITF PKG. NO. SIZE PKG WT / / / / / * * *Pallet Quantities 8

52 Elbow Dimensions Plain End ell End SIZE A MIN MIN C MIN / /2 /4 4 / /2 /4 4-/2.5-7/8 7/8 5-/4 / /4 / /8 8-/ /8 9-/2 2 / /2 0-/ /8-5/8 / /4 -/ /8 -/ / /4 2-/8 0 9

53 Schedule 40 & 80 Special Fittings Two-Hole Pipe Straps PART STD. UPC-ITF PKG. NO. SIZE PKG WT. 576 / / / / / Expansion Couplings One Piece PART STD. UPC-ITF PKG. NO. SIZE PKG WT / / / / / /2 through /4 2 through Maximum Expansion 4 Maximum Expansion 6 through -/2 -/2 through 4 Maximum Expansion 5 Maximum Expansion 7 Expansion Couplings Two Piece Expansion Couplings Two Piece w/molded Male Adapter PART STD. UPC-ITF PKG. NO. SIZE PKG WT / / / / / / /2 through 2 2 /2 through 6 Maximum Expansion 4 Maximum Expansion 8 PART STD. UPC-ITF PKG. NO. SIZE PKG WT /

54 Schedule 40 & 80 Special Fittings End ells PART STD. UPC-ITF PKG. NO. SIZE PKG WT / / / / / / Reducers PART STD. UPC-ITF PKG. NO. SIZE PKG WT /4 x / x / /4 x * /2 x -/ * x -/ * /2 x * x 2-/ * x * x -/ * CSA Listed Poly Plugs PART STD. UPC-ITF PKG. NO. SIZE PKG WT Poly Plugs with Pulling Eye PART STD. UPC-ITF PKG. NO. SIZE PKG WT

55 Schedule 40 & 80 Special Fittings Sch 40 Longline Coupling No Center Stop (Repair Coupling) (Fabricated) PART STD. UPC-ITF PKG. NO. SIZE PKG WT / / / Sch 40 Longline Coupling with Center Stop (Molded) PART STD. UPC-ITF PKG. NO. SIZE PKG WT / Sch 40 Swedged Coupling (Fabricated) PART STD. UPC-ITF PKG. NO. SIZE PKG WT Sch 40 Split Sleeve Coupling (Fabricated) PART STD. UPC-ITF PKG. NO. SIZE PKG WT End ells (Fabricated) PART STD. UPC-ITF PKG. NO. SIZE PKG WT D

56 Schedule 80 Standard Radius Elbows 90 Elbows Plain End PART STD. UPC-ITF PKG. NO. SIZE PKG WT / / / / / * * Elbows Plain End PART STD. UPC-ITF PKG. NO. SIZE PKG WT / / / / / * * Elbows Plain End PART STD. UPC-ITF PKG. NO. SIZE PKG WT / / / / / * * * Pallet quantities 24

57 Schedule 80 Special Radius Elbows Plain End SIZE / 4 / / DEGREE END PART NUMER 8 RADIUS 24 RADIUS 6 RADIUS 48 RADIUS 60 RADIUS / / / / / / / / / Note: () Orders for special radius elbows are non-cancelable and non-returnable. (2) Larger radius available on request. () Other degree bends available on request.

58 Solvent Cement for Conduit and Fittings Conduit Cement No. 99 Conduit Cement No. 99 Low VOC Conduit Cement Gray PART NO. PART NO. SIZE SIZE STD. PKG. STD. PKG. UPC-ITF UPC-ITF PKG. WT /2 Pint Pint Quart Gallon PART NO. SIZE STD. PKG. UPC-ITF PKG. WT /2 Pint Pint Quart Gallon PKG. WT Pint Quart Conduit Cement All Weather Fast-Dry PART NO. SIZE STD. PKG. UPC-ITF PKG. WT /2 Pint Pint Quart Primer No. 0 PART NO. SIZE STD. PKG. UPC-ITF PKG. WT. 720 /2 Pint Pint Quart Gallon ESTIMATED SOLVENT REQUIREMENT PER,000 FEET: IN QUARTS One Weld per 20 Feet Pipe Size /2 /4 /4 /2 2 2 / Cement /2 /2 /2 /2 /2 2 2 /2 4 Primer /2 /2 /2 /2 /2 2 2 /2 4 Solvent Cement for EZ-FLEX ENT ENT No. 50 CEMENT PART NO. SIZE STD. PKG. UPC-ITF PKG. WT Pint Quart

59 Limited Warranty The Seller, CANTEX Inc., warrants its PVC plastic pipe, conduit, fittings, accessories, residential electrical boxes and solvents against defective workmanship and material for a period of one year from date of applicable invoice. Seller s liability hereunder, either for breach of warranty or for negligence, is expressly limited, at Seller s option, to: A) Replacement at the agreed point of delivery, at no cost to the Purchaser, of any product found by the Seller to be defective or found not to conform to the applicable industry manufacturing standards, or ) to refund or credit to the Purchaser of the purchase price of such products, provided that Seller is notified immediately upon the discovery of any claimed defect and that representative samples of the allegedly defective product are returned, transportation prepaid, to Seller, F.O.. shipping point, at Seller s request. No claim under this Limited Warranty will be considered until the product and representative samplings thereof have been examined by Seller. The above warranty constitutes the entire liability of the Seller. Seller shall not be liable for any incidental or consequential damages directly or indirectly arising or resulting from the sale, transportation, handling, installation or use of the products sold, nor for product losses, reinstallation or labor costs. THIS WARRANTY IS EXPRESSLY IN LIEU OF ANY OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTAILITY OR FITNESS FOR ANY PARTICULAR PURPOSE, AND OF ANY OTHER OLIGATION OR LIAILITY ON THE PART OF THE SELLER. Situations that void this Limited Warranty:. Excessive temperature combination during test of operation. 2. Use of the product under conditions for which the product was not designed.. Failure to adhere to Seller s General Instruction Sheets concerning the proper handling, installation and testing of the product. General Instruction Sheets are available on request; Call Use of non-suitable solvent cement. Suitable solvent cement shall be cement made in accordance with ASTM D 64 and of the proper grade (viscosity) for the size of pipe being joined. CANTEX solvent cements meet these requirements Gandy Road Chamberlin Rd. # Auburndale, Florida 82 Aurora, Ohio Commerce Ste Fort Worth, Texas Woodland Ave Industrial Park lvd. Reno, Nevada 895 Rolla, Missouri NE st St onanza Drive Mineral Wells, Texas Kingman, Arizona 8640

60 R IA45 NEER Conduit odies Conduit ody, Cover & Gasket Assemblies For Rigid Conduit & IMC IA45 Types L, T, LL, LR, C Use: To provide access to conductors for pulling, splicing, maintenance and future changes/ upgrades. Allows connection of straight conduit runs, branch conduit runs and 90 bends. Features: Threaded hubs Packaged complete under one Catalog Number Ready to use Material/Finish: Conduit ody - Die-cast, Copper-free Aluminum with Powder Coat Cover - Stamped Aluminum - Natural Finish Gasket - Neoprene Third Party Certifications: UL Listed: E50 CSA Certified UL Standard: 54A CSA Standard: C22.2 No. 8 Fed Spec: A-A-5056 NEMA: F-, F-2.0 Dimensional Data: See Page IA46. Trade Size (inches) Die Cast Catalog Number Threaded 2 L-50DCG L-75DCG L-00DCG L-DCG 2 L-50DCG 2 L-200DCG 2 2 L-0DCG L-00DCG 2 L-50DCG 4 L-400DCG 2 LL-50DCG LL-75DCG LL-00DCG LL-DCG 2 LL-50DCG 2 LL-200DCG 2 LR-50DCG LR-75DCG LR-00DCG LR-DCG 2 LR-50DCG 2 LR-200DCG 2 LC-50DCG LC-75DCG LC-00DCG LC-DCG 2 LC-50DCG 2 LC-200DCG 2 TC-50DCG TC-75DCG TC-00DCG TC-DCG 2 TC-50DCG 2 TC-200DCG Type L Type LL Type LR Type LC Replacement covers Available. See page IA5. Type TC Effective December, 2007 Copyright

61 IA46 NEER Conduit odies Conduit ody, Cover & Gasket Assemblies For Rigid Conduit & IMC IA46 Dimensional Data: Threaded Trade Size (inches) Catalog Number Threaded Dimensions in Inches A C Volume Cu. In. Max. No. Conductors Type L 2 L-50DCG N/A L-75DCG #6AWG L-00DCG #4AWG L-DCG #2AWG 2 L-50DCG #2AWG 2 L-200DCG #4/0AWG 2 2 L-0DCG #4/0AWG L-00DCG #4/0AWG 2 L-50DCG #50MCM 4 L-400DCG #50MCM Type LL 2 LL-50DCG N/A LL-75DCG #6AWG LL-00DCG #4AWG LL-DCG #2AWG 2 LL-50DCG #/0AWG 2 LL-200DCG #4/0AWG Type LR 2 LR-50DCG N/A LR-75DCG #6AWG LR-00DCG #4AWG LR-DCG #2AWG 2 LR-50DCG #/0AWG 2 LR-200DCG #4/0AWG Type LC 2 LC-50DCG N/A LC-75DCG #6AWG LC-00DCG #4AWG LC-DCG #2AWG 2 LC-50DCG #/0AWG 2 LC-200DCG #4/0AWG Type TC 2 TC-50DCG N/A TC-75DCG #6AWG TC-00DCG #4AWG TC-DCG #2AWG 2 TC-50DCG #/0AWG 2 TC-200DCG #4/0AWG Effective December, 2007 Copyright

62 R IA47 NEER Conduit odies IA47 Conduit ody, Cover & Gasket Assemblies For Rigid Conduit, IMC & EMT Types L, T, LL, LR, C Use: To provide access to conductors for pulling, splicing, maintenance and future changes/ upgrades. Allows connection of straight conduit runs, branch conduit runs and 90 bends. Features: Threaded and set screw hubs (SST) 2 2 thru 4 sizes have set screw hub (SS) only Packaged complete under one Catalog Number Ready to use Material/Finish: Conduit ody - Die-cast, Copper-free Aluminum with Powder Coat Cover - Stamped Aluminum - Natural Finish Gasket - Neoprene Third Party Certifications: UL Listed: E50 CSA Certified UL Standard: 54A CSA Standard: C22.2 No. 8 Fed Spec: A-A-5056 NEMA: F-, F-2.0 Dimensional Data: See Pages IA48. Trade Size (inches) Die Cast Catalog Number Multi-Hub 2 L-50DCGSST L-75DCGSST L-00DCGSST L-DCGSST 2 L-50DCGSST 2 L-200DCGSST 2 2 L-0DCGSS L-00DCGSS 2 L-50DCGSS 4 L-400DCGSS 2 LL-50DCGSST LL-75DCGSST LL-00DCGSST LL-DCGSST 2 LL-50DCGSST 2 LL-200DCGSST 2 2 LL-0DCGSS LL-00DCGSS 2 LL-50DCGSS 4 LL-400DCGSS 2 LR-50DCGSST LR-75DCGSST LR-00DCGSST LR-DCGSST 2 LR-50DCGSST 2 LR-200DCGSST 2 2 LR-0DCGSS LR-00DCGSS 2 LR-50DCGSS 4 LR-400DCGSS 2 LC-50DCGSST LC-75DCGSST LC-00DCGSST LC-DCGSST 2 LC-50DCGSST 2 LC-200DCGSST 2 2 LC-0DCGSS LC-00DCGSS 2 LC-50DCGSS 4 LC-400DCGSS 2 TC-50DCGSST TC-75DCGSST TC-00DCGSST TC-DCGSST 2 TC-50DCGSST 2 TC-200DCGSST 2 2 TC-0DCGSS TC-00DCGSS 2 TC-50DCGSS 4 TC-400DCGSS Type L Type LL Type LR Type LC Type TC Replacement covers Available. See page IA5. Effective December, 2007 Copyright

63 IA48 NEER Conduit odies Conduit ody, Cover & Gasket Assemblies For Rigid Conduit, IMC & EMT IA48 Dimensional Data: Multi-Hub Type L Type LL Type LR Type LC Type TC Trade Size (inches) Catalog Number Multi-Hub Dimensions in Inches A C Volume Cu. In. Max. No. Conductors 2 L-50DCGSST N/A L-75DCGSST #6AWG L-00DCGSST #4AWG L-DCGSST #2AWG 2 L-50DCGSST #/0AWG 2 L-200DCGSST #4/0AWG 2 2 L-0DCGSS #00kcmil L-00DCGSS #50kcmil 2 L-50DCGSS #400kcmil 4 L-400DCGSS #400kcmil 2 LL-50DCGSST N/A LL-75DCGSST #6AWG LL-00DCGSST #4AWG LL-DCGSST #2AWG 2 LL-50DCGSST #/0AWG 2 LL-200DCGSST #4/0AWG 2 2 LL-0DCGSS #00kcmil LL-00DCGSS #50kcmil 2 LL-50DCGSS #50kcmil 4 LL-400DCGSS #50kcmil 2 LR-50DCGSST N/A LR-75DCGSST #6AWG LR-00DCGSST #4AWG LR-DCGSST #2AWG 2 LR-50DCGSST #/0AWG 2 LR-200DCGSST #4/0AWG 2 2 LR-0DCGSS #00kcmil LR-00DCGSS #50kcmil 2 LR-50DCGSS #50kcmil 4 LR-400DCGSS #50kcmil 2 LC-50DCGSST N/A LC-75DCGSST #6AWG LC-00DCGSST #4AWG LC-DCGSST #2AWG 2 LC-50DCGSST #/0AWG 2 LC-200DCGSST #/0AWG 2 2 LC-0DCGSS #0kcmil LC-00DCGSS #0kcmil 2 LC-50DCGSS #50kcmil 4 LC-400DCGSS #50kcmil 2 TC-50DCGSST N/A TC-75DCGSST #6AWG TC-00DCGSST #4AWG TC-DCGSST #2AWG 2 TC-50DCGSST #/0AWG 2 TC-200DCGSST #4/0AWG 2 2 TC-0DCGSS #4/0AWG TC-00DCGSS #4/0AWG 2 TC-50DCGSS #0kcmil 4 TC-400DCGSS #0kcmil Effective December, 2007 Copyright

64 IA49 NEER Conduit odies Aluminum Threaded Conduit odies For Rigid Conduit & IMC Types L-D, LL-D, LR-D, LC, TC Use: For threaded rigid conduit or IMC. Provides access to the interior of the raceway for wire pulling, splicing (with limitations as specified in the National Electrical Code), and maintenance. For covers and gaskets, see Page IA46. Material/Finish: Die Cast Aluminum/Powder Coated Epoxy UL Listed: E50 Trade Size (inches) Catalog Number 2 L-50-D L-75-D L-00-D L--D 2 L-50-D 2 L-200-D 2 2 L-0-D L-00-D 2 L-50-D 4 L-400-D 2 LL-50-D Type L-50-D IA49 UL Standard: 54A NEMA: F- Dimensional Data: See Pages IA50. LL-75-D LL-00-D LL--D 2 LL-50-D 2 LL-200-D 2 LR-50-D LR-75-D LR-00-D LR--D 2 LR-50-D 2 LR-200-D 2 LC-50 LC-75 LC-00 LC- 2 LC-50 2 LC TC-50 TC-75 TC-00 TC- 2 TC-50 2 TC-200 Type LL-50-D Type LR-50-D Type LC-50 Type TC-50 Replacement covers Available. See page IA5. Effective December, 2007 Copyright

65 IA50 NEER Conduit odies Aluminum Threaded Conduit odies For Rigid Conduit & IMC IA50 Dimensional Data: Trade Catalog Number Dimensions in Inches Size Threaded (inches) Threaded A C Volume Cu. In. Max. No. Conductors Type L 2 L-50-D N/A L-75-D #6AWG L-00-D #4AWG L--D #2AWG 2 L-50-D #2AWG 2 L-200-D #4/0AWG 2 2 L-0-D #4/0AWG L-00-D #4/0AWG 2 L-50-D #50MCM 4 L-400-D #50MCM Type LL 2 LL-50-D N/A LL-75-D #6AWG LL-00-D #4AWG LL--D #2AWG 2 LL-50-D #/0AWG 2 LL-200-D #4/0AWG Type LR 2 LR-50-D N/A LR-75-D #6AWG LR-00-D #4AWG LR--D #2AWG 2 LR-50-D #/0AWG 2 LR-200-D #4/0AWG Type LC 2 LC N/A LC #6AWG LC #4AWG LC #2AWG 2 LC #/0AWG 2 LC #4/0AWG Type TC 2 TC N/A TC #6AWG TC #4AWG TC #2AWG 2 TC #/0AWG 2 TC #4/0AWG Effective December, 2007 Copyright