Ground Connectors All Copper Alloy Specification Grade

Size: px

Start display at page:

Download "Ground Connectors All Copper Alloy Specification Grade"

Coleen Phelps
6 years ago
Views:

1 Connectors For cable connection parallel or at right angles to pipe or rod. Features A high strength corrosion-resistant copper alloy ground connector connecting a ground wire either parallel or at right angles to a ground rod or pipe. A positive ground is assured by the clamping pressure that can be applied by the high strength silicon bronze U-bolt, nuts and lock washers. Type ABG connectors are suitable for direct burial. For ground pipe larger than 11 2 use Type CG Connector. UL Listed: E Nema: FB-1 Type ABG at Right Angles Conduit Type ABG Parallel Conduit Rod Size Driven (In.) AG/kcmil Pipe Size Min. Max. L U B 5/8 or3/4 3/ (1.31) 54.1 (2.13) ABG /8 or3/4 3/8 4 2/ (1.50) 60.5 (2.38) ABG /8 or3/4 3/8 2/ (1.88) 66.8 (2.63) ABG /2 or3/4 2/ (2.25) 47.8 (1.88) 76.2 (3.00) ABG (2.56) 33.3 (1.31) 69.9 (2.75) ABG / (2.56) 47.8 (1.88) 85.9 (3.38) ABG /2 2/ (3.13) 47.8 (1.88) 95.3 (3.75) ABG

2 Connectors For cable connection either parallel or at right angle to pipe. A high strength corrosion-resistant copper alloy ground connector having a reversible contact plate which permits the ground wire to be connected either at right angles or parallel to a ground pipe. The fitting is designed so that the saddle can be installed before the ground connection is made. High strength silicon bronze hardware permits high clamping pressures to be applied. For ground pipe smaller than 2 use Type ABG. Type CG connectors are suitable for direct burial and wet locations. UL Listed: E CSA Certified: Fed. Spec: -F-406E AG/kcmil Type CG Pipe L Type CG Pipe Size (Inches) Min. Max. L U B (3.63) (0.88) (3.75) 9.65 CG / (3.63) (1.19) (4.00) 9.65 CG / (3.63) (1.44) (4.13) 9.65 CG (3.88) (1.88) (4.50) (0.44) CG / (4.13) (0.88) (4.25) 9.65 CG /2 4 2/ (4.13) (1.19) (4.50) 9.65 CG /2 2/ (4.13) (1.44) (4.75) 9.65 CG / (4.38) (1.88) (5.00) (0.44) CG (4.75) (0.88) (4.81) 9.65 CG / (4.75) (1.19) (5.13) 9.65 CG / (4.75) (1.44) (5.38) 9.65 CG (5.25) (1.88) (5.75) (0.50) CG CG / (5.25) (0.88) (5.25) 9.65 CG /2 4 2/ (5.25) (1.19) (5.63) 9.65 CG /2 2/ (5.25) (1.44) (5.88) 9.65 CG / (5.75) (1.88) (6.13) (0.50) CG / CG (5.75) (0.88) (5.75) 9.65 CG / (5.75) (1.19) (6.13) 9.65 CG / (5.75) (1.44) (6.13) 9.65 CG (6.25) (1.88) (6.63) (0.50) CG CG / (6.88) (1.19) (7.13) 9.65 CG / (6.88) (1.44) (7.38) 9.65 CG (7.25) (1.88) (7.75) (0.50) CG CG / (8.00) (1.19) (8.25) 9.65 CG / (8.00) (1.44) (8.50) 9.65 CG (8.38) (1.88) (8.88) (0.50) CG (8.38) (2.38) (9.38) (0.50) CG (8.38) (2.38) (9.38) (0.50) CG / (10.00) (1.44) (10.50) 9.65 CG (10.38) (1.88) (10.88) (0.50) CG CG CG-8192 Top View B U COMMERCIAL AND INDUSTRIAL FITTINGS: GROUNDING FITTINGS/SOLDERLESS CONNECTORS 369

3 Connectors CEC: This ground connector is used for grounding H column fence posts. Its design eliminates the need for drilling the post. To attach, loosen the nut sufficiently to allow the end of the J bolt to slip over the flange, assemble the cable into the fitting and then tighten. Standard Materials Current carrying parts - cast copper alloy Standard Finishes J bolt, nut and washer - hot hip galvanized steel CEC Certifications and Compliances Type TG I-Beam Min. Solid "H" Column Fence Post Max. Str. Min. Max. L B 4 4/ (4.13) 25.4 (1.00) 9.65 TG

4 Connectors Rated for Ordinary Locations An economical ground connector for connecting a ground wire to any flat surface. Copper alloy body and silicon bronze bolt, nut and lock washer combine strength and corrosion-resistance to insure a positive ground connection. HEX-CUP construction of the fitting simplifies installation by requiring only a single wrench for tightening. Type KGM One-Piece Design COMMERCIAL AND INDUSTRIAL FITTINGS: GROUNDING FITTINGS/SOLDERLESS CONNECTORS AG/kcmil Min. Max.. L H B /0 2/ (1.63) 60.5 (2.38) 85.9 (3.38) 31.8 (1.25) 38.1 (1.50) 41.4 (1.63) 46.0 (1.81) 58.7 (2.31) 66.8 (2.63) 11.2 (0.44) 12.7 (0.50) KGM-04 KGM-22 KGM-25 KGM-50 KGM-75 KGM

5 Connectors For connecting two parallel cables of the same or varying sizes to any flat surface. Installation of connectors is simplified by HEX-CUP construction. s are gripped by the interlocking clamp, used throughout the line of ground devices. Copper alloy body and silicon bronze bolts, nuts and lock washers make a completely corrosion resistant fitting and permit high pressure to be applied - insuring a positive ground connection. Suitable for direct burial NOTE: Bolts furnished will fasten connector to plate 1/4 thick. Longer bolts will be furnished when necessary if plate thickness is specified. Contact your local representative. Type LG One Bolt H L B C AG/kcmil L Min. Max. L H B /0 2/ (2.13) 88.9 (3.50) 98.6 (3.88) 31.8 (1.25) 38.1 (1.50) 57.2 (2.25) 52.3 (2.06) 65.0 (2.56) 79.5 (3.13) 11.2 (0.44) 12.7 (0.50) B LG-04 LG-22 LG-25 LG-50 LG-75 LG

Number Tube I.P.S. Rod Size or O.D. Range Cable H J W

Number Tube I.P.S. Rod Size or O.D. Range Cable H J W TYPE GAR D-28 FENCE POST GROUNDING CONNECTOR For Parallel or 90 Copper Cable Connection To Rod or Pipe with the Same Connector High copper alloy ground connector for joining a range of cable, parallel