Rigid/Aluminum Conduit Bodies, Gaskets and Covers
|
|
- Barry Gallagher
- 6 years ago
- Views:
Transcription
1 Rigid/luminum Conduit odies, Gaskets and Covers Conduit odies, Covers and Gaskets Weatherproof oxes and Covers pplications Junction for branch conduits Series bodies for Rigid and IMC conduit maintain a weather resistant conduit system when used with covers and gaskets Series bodies for thin wall conduit (MT) saves cost of connector and labor in indoor applications Spacious, accessible wiring chamber provides a convenient location to pull conductors and make splices luminum conduit bodies can be used with steel rigid conduit NC 46-1, and Steel MT, NC 48-1 Features/enefits Copper-free* aluminum provides increased corrosion resistance Precision cast and machined surfaces permit safer wire pulling Clean cover edges provide good gasket sealing Precision NPT threaded and set screw hubs allow trouble-free field installation for rigid, IMC or MT conduit Standard Finish Conduit bodies and die cast covers: powder coated Stamped covers: Natural Standard Materials Conduit odies: Die cast aluminum alloy 60 with less than.004 copper content (copper-free) Covers: (CV Series) Die cast aluminum alloy 60 with less than.004 copper content (copper-free), and stainless steel screws Covers: (SCV Series) Stamped aluminum alloy with less than.004 copper content (copper-free), and stainless steel screws Gaskets: (GKN Series) Neoprene Gaskets: (GKV Series) Composition Compliances UL Listed CS Certified Federal Spec. W-C-586 NC rticle Sample Specifications Conduit bodies shall be die cast copper-free* aluminum alloy 60. ll conduit stops shall be free of rough edges. Conduit bodies shall be finished with powder coated paint. Conduit bodies shall be Red Dot Catalog No. *Less than.004 copper content Clean Cover dges Copper-Free luminum Clear Markings Retained Deep Slotted Stainless Steel Screws Smooth Conduit Stops Precision Machined Threads Retained deep slotted stainless steel cover screws for faster installation Clear UL, CS and cubic content markings speed approval by inspectors L LL T Conduit odies, Covers and Gaskets Series C Style Fittings, covers and gaskets are interchangeable with those produced by other leading manufacturers. Finish: Powder coated urethane. Type C TRD CT. NO. SIZ CTN. C-1-RD 1 2" C-2-RD 4" C- 1" C-4-RD 1 1 4" C " C-6-RD 2" C-7* C-8* " C-9* 1 2" C-10-RD* 4" CT. NO. HU SIZ CTN. D-PK * DC-1-CG 1 DC-2-CG 4" 15 DC--CG 1" 8 DC-4-CG 1 1 4" 6 DC-5-CG 1 1 2" 5 DC-6-CG 2" 2 DC-7-CG 2 1 2" 2 DC-8-CG " 2 DC-9-CG 1 2" 2 DC-10-CG 4" 2 UL File No D-62
2 Rigid/luminum Conduit odies, Gaskets and Covers Conduit odies, Covers and Gaskets Series (continued) L Style Type L CT. TRD NO. SIZ CTN. L-1 1 2" L-2 4" L- 1" L " L " L-6 2" L-7* L-8* " L-9* 1 2" L-10* 4" CT. NO. HU SIZ CTN. D-PK * DL-1-CG 1 2" 25 DL-2-CG 4" 16 DL--CG 1" 6 DL-4-CG 1 1 4" 5 DL-5-C 1 1 2" 5 DL-6-CG 2" 2 DL-7-CG 2 1 2" 2 DL-8-CG " 2 DL-9-CG 1 2" 2 DL-10-CG 4" 2 UL File No LL Style Die cast copper-free aluminum construction. Provide access for pulling, splicing and maintenance. For rigid conduit/imc applications. UL Listed. Type LL TRD CT. NO. SIZ CTN. LL-1 1 LL-2 4" LL- 1" LL " LL " LL-6 2" LL-7* LL-8* " LL-9* 1 2" LL-10* 4" CT. NO. HU SIZ CTN. D-PK * DLL-1-CG 1 DLL-2-CG 4" 15 DLL--CG 1" 5 DLL-4-CG 1 1 4" 4 DLL-5-CG 1 1 2" 5 DLL-6-CG 2" 2 DLL-7-CG 2 1 2" 2 DLL-8-CG " 2 DLL-9-CG 1 2" 2 DLL-10-CG 4" 2 UL File No Weatherproof oxes and Covers D-6 -
3 Rigid/luminum Conduit odies, Gaskets and Covers Conduit odies, Covers and Gaskets Series (continued) LR Style T Style Weatherproof oxes and Covers Die cast copper-free aluminum construction Provide access for pulling, splicing and maintenance For rigid conduit/imc applications Fittings, covers and gaskets are interchangeable with those produced by other leading manufacturers Finish: Powder coated urethane TRD CT. NO. SIZ CTN. LR-1 1 LR-2 4" LR- 1" LR " LR " LR-6 2" LR-7* LR-8* " LR-9* 1 2" LR-10* 4" * Threaded shipped with cover. Price includes cost of cover and body. LRL Style Type LRL CT. TRD NO. SIZ CTN. LRL-1 1 LRL-2 4" LRL- 1" LRL " LRL " LRL-6 2" Shipped with cover. Price includes cost of cover and body. Type LR CT. NO. HU SIZ CTN. D-PK * DLR-1-CG 1 DLR-2-CG 4" 15 DLR--CG 1" 5 DLR-4-CG 1 1 4" 4 DLR-5-CG 1 1 2" 4 DLR-6-CG 2" 2 DLR-7-CG 2 1 2" 2 DLR-8-CG " 2 DLR-9-CG 1 2" 2 DLR-10-CG 4" 2 UL Listed. TYP T CT. TRD NO. SIZ CTN. T-1 1 2" T-2 4" T- 1" T " T " T-6 2" T-7* T-8* " T-9* 1 2" T-10* 4" CT. NO. HU SIZ CTN. D-PK * DT-1-CG 1 DT-2-CG 4" 14 DT--CG 1" 5 DT-4-CG 1 1 4" 5 DT-5-CG 1 1 2" 5 DT-6-CG 2" 2 DT-7-CG 2 1 2" 2 DT-8-CG " 2 DT-9-CG 1 2" 2 DT-10-CG 4" 2 Dead nd Retained stainless steel cover screws Cubic capacity UL and CS clearly shown Smooth throats for easy wire pulling Ultra-high pressure die cast copper-free aluminum UL Listed, CS Certified CT. NO. HU SIZ " -2 4" D-64
4 Rigid/luminum Conduit odies, Gaskets and Covers luminum Conduit odies, Covers and Gaskets Series C Style LL Style Type C TYP LL CT. TRD NO. SIZ CTN. C-1-RD 1 2" C-2-RD 4" C- 1" C " C " C-6 2" L Style Type L CT. TRD NO. SIZ CTN. L-1 1 2" L-2 4" L- 1" L " L " L-6 2" L-7* L-8* " L-9* 1 2" L-10* 4" CT. TRD NO. SIZ CTN. LL-1 1 LL-2 4" LL- 1" UL File No LR Style TYP LR CT. TRD NO. SIZ CTN. LR-1 1 LR-2 4" LR- 1" UL File No LRL Style Weatherproof oxes and Covers D-PK * CT. TRD NO. SIZ CTN. DL-1-C* 1 2" 25 DL-2-C* 4" 16 DL--C* 1" 6 * Threaded Hubs shipped with cover. Price includes cost of cover and body. CT. TRD NO. SIZ CTN. LRL-1 1 LRL-2 4" LRL- 1" LRL " LRL " LRL-6 2" Shipped with cover. Price includes cost of cover and body. Type LRL D-65 -
5 Rigid/luminum Conduit odies, Gaskets and Covers luminum Conduit odies, Covers and Gaskets Series (continued) Gaskets Composition Weatherproof oxes and Covers T Style SCV = Stamped aluminum CV = Die cast aluminum Steel zinc plated screws Type T CT. TRD NO. SIZ CTN. T-1 1 2" T-2 4" T- 1" T " T " T-6 2" T-7* T-8* " T-9* 1 2" T-10* 4" * Threaded Hubs shipped with cover. Price includes cost of cover and body. luminum Covers with Stainless Steel Screws Fiber Gasket CONDUIT CT. NO. SIZ CTN. GKV-1 1 2" 100 GKV-2 4" 50 GKV- 1" 25 GKV " 1 1 2" 25 GKV-5 2" 25 GKV " " 5 GKV-7 1 2" 4" 5 Gaskets Neoprene Fiber or neoprene material Neoprene Gasket CONDUIT CT. NO. SIZ CTN. GKN-1 1 2" 100 GKN-2 4" 50 GKN- 1" 25 GKN " 1 1 2" 25 GKN-5 2" 25 GKN " " 5 GKN-7 1 2" 4" 5 CONDUIT CT. NO. SIZ CTN. CV-1 1 2" 250 CV-2 4" 250 CV- 1" 250 CV " 1 1 2" 50 CV-5 2" 25 CV " " 5 CV-7 1 2" 4" 5 SCV-1 1 2" 250 SCV-2 4" 250 SCV- 1" 250 SCV " 1 1 2" 250 SCV-5 2" 100 D-66
6 Rigid/luminum Conduit odies, Gaskets and Covers C, and T C T SIZ C D F G CI 1 2" Q " LL, LR, & LRL " " " " O " " " LL, LR and LRL C F D G H C,, & T LL LR LRL Open Thru SIZ C D F G H CI CI LRL STYL ONLY 1 2" " " " " " " " " C G F D Weatherproof oxes and Covers L C SIZ C D F CI 1 2" " " " " " " " " D F Conduit ody Wiring Table* Style of Fitting TRD SIZ L C T LL, LR, LRL 4" #6 #6 #6 #6 1" #4 #4 #4 # " #2 #2 #2 # " 1/0 1/0 #1 1/0 2" 4/0 2/0 1/0 4/ " 00 MCM 250 MCM 2/0 00 MCM " 400 MCM 250 MCM 2/0 500 MCM 1 2" 500 MCM 50 MCM 250 MCM 500 MCM 4" 500 MCM 50 MCM 250 MCM 500 MCM *The Maximum number and size of wire that can be safely pulled is based on three type XHHW wires or equal. D-67 -
Spec 5 Conduit Bodies, Covers and Gaskets For Rigid Conduit and IMC
NEC/CEC Suitable for use in the following Applications To provide access to conductors for pulling, splicing, maintenance and future changes/ upgrades. Allows connection of straight conduit runs, branch
More informationForm 35 Malleable Iron Conduit Outlet Bodies, Covers and Gaskets For use with Rigid Steel, Rigid Aluminum and IMC Conduit.
NEC/CEC Suitable for use in the following Applications Serve as pulling fittings. Make bends in conduit system. Provide openings for splicing. Connect and change direction of conduit runs. Allow connections
More informationForm 85 Unilets Conduit Outlet Bodies, Covers and Gaskets For use with Rigid Steel, Rigid Aluminum, IMC, and EMT Conduit.
For use with Rigid Steel, Rigid Aluminum, IMC, and EMT Conduit. NEC/CEC Suitable for use in the following Applications Serve as pulling fittings. Make bends in conduit system. Provide openings for splicing.
More informationFM9 Aluminum Unilet Conduit Outlet Bodies, Covers and Gaskets For use with Rigid Steel, Rigid Aluminum and IMC.
FM9 Aluminum Unilet Conduit Outlet Bodies, Covers and Gaskets For use with Rigid Steel, Rigid Aluminum and IMC. : Conduit Bodies Applications Serve as pulling fittings. Make bends in conduit system. Provide
More informationFM8 Conduit Outlet Bodies, Covers and Gaskets For use with Rigid Steel, Rigid Aluminum and IMC Conduit.
NEC/CEC Suitable for use in the following Applications Serve as pulling fittings. Make bends in conduit system. Provide openings for splicing. Connect and change direction of conduit runs. Allow connections
More informationLB125A 1-1/4" LB Form 5 Aluminum Conduit Body. Dimensions and Weight STUD SIZE #10; 0.97 INCH LENGTH; INSULATION SUPPORT
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 LB125A 1-1/4" LB Form 5 Aluminum Conduit Body Appleton/Oz Gedney Catalog Number Manufacturer Description Weight per unit
More informationFM9 Aluminum Conduit Outlet Bodies, Covers and Gaskets For use with Rigid Steel, Rigid Aluminum and IMC.
Applications Serve as pulling fittings. Make bends in conduit system. Provide openings for splicing. Connect and change direction of conduit runs. Allow connections for branch runs. Permit access to conductors
More informationAluminum Conduit Bodies, Covers and Gaskets For Rigid Conduit & IMC.
NEC/CEC Suitable for use in the following Applications To provide access to conductors for pulling, splicing, maintenance and future changes/upgrades. Allows connection of straight conduit runs, branch
More informationWeatherproof Products
Technical Specifications pplications : Junction for branch conduits in hazardous locations ccessible wiring chamber provides a convenient location to maintain or change a system, pull conductors and make
More informationT38 1" T Form 7 Malleable Iron Conduit Body. Material, Color, and Finish Color Gray 0 Zinc Electroplate/Chromate/Epoxy Powder Coat
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 T38 1" T Form 7 Malleable Iron Conduit Body Appleton/Oz Gedney Catalog Number Manufacturer Description Weight per unit
More informationFM7 Conduit Outlet Bodies, Covers and Gaskets For use with Rigid Steel, Rigid Aluminum and IMC Conduit.
NEC/CEC Suitable for use in the following Applications Serve as pulling fittings. Make bends in conduit system. Provide openings for splicing. Connect and change direction of conduit runs. Allow connections
More informationForm 7 Iron Conduit Bodies, Covers and Gaskets For use with Rigid Steel, Rigid Aluminum and IMC Conduit.
NEC/CEC Suitable for use in the following Applications Serve as pulling fittings. Make bends in conduit system. Provide openings for splicing. Connect and change direction of conduit runs. Allow connections
More informationCONDUIT BODIES CONDUIT BODIES. Phone:
i i Con it Bo ies allea le I on o i i I C con it cond ctors or p llin splicin Tapered threaded hu s - NPT Suita le or use in concrete Threaded LB Conduit Bodies MLB1 1/2 4-11/16 1-5/16 2-1/16 70 70.6 MLB2
More informationMaterial, Color, and Finish Color Gray 0 Zinc Electroplate/Chromate/Epoxy Powder Coat
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 T37 1 T FM7 CND BD Appleton/Oz Gedney Catalog Number T37 Manufacturer Appleton/Oz Gedney Description FM7 Unilets Type
More information1-1/2 AL LB FM7 CND BD. Features. Material, Color, and Finish. Dimensions and Weight. Descriptions. Manufacturer Information
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 LB57SA 1-1/2 Al LB FM7 CND BD Appleton/Oz Gedney Catalog Number Manufacturer Description Weight per unit Product Category
More informationCOMMERCIAL AND INDUSTRIAL FITTINGS: CONDUIT BODIES. Applications
Class I, Division per NEC 50.0(B)() Applications Larger body size facilitates pulling of large and heavy conductors. Specially designed raised cast covers provide additional wiring area. Mogul Unilets
More informationBUB400M 4-In Mog Cond Body. Features. Material, Color, and Finish. Dimensions and Weight
380 South Street 7596-763, TX Nacogdoches Phone: 936-569-79 Fax: 936-560-685 BUB00M -In Mog Cond Body Appleton/Oz Gedney Catalog Number Manufacturer Description Weight per unit Product Category Features
More informationCondulet Cast Device Boxes and Covers Application and Selection
F Condulet Cast and Covers Application and Selection Application: Cast device boxes are installed in conduit and cable systems to: Accommodate wiring devices Act as pull boxes for conductors in a conduit
More informationNon-Metallic Weatherproof Boxes, Covers and Lampholders
Non-Metallic Weatherproof oxes, s and Lampholders pplications Marine rated boxes and covers are ideal for use in highly corrosive areas, beaches, docks, pools, or other wet location areas. Use in branch
More informationMulberry Metal Products Seattle Stock Sheet
Weatherproof Lampholders (catalog page B23) 30001 Die Cast Lampholders Residential Grade Aluminum 36 39 lbs. 30002 Die Cast Lampholders Residential Grade Natural 36 39 lbs. 30003 Deluxe Lampholder Gray
More informationLiquid Tight. Liquid Tight Connectors Reusable Fittings. Straight Connectors. Straight Connectors with Insulated Throat
Liquid Tight Connectors Reusable Fittings Industrial specification grade, screw machined steel, zinc plated UL Rated Liquid Tight Includes sealing washer Bonds conduit to box or enclosure Corrosion resistant
More informationConduit Outlet Boxes and Bodies: Malleable Iron or Aluminum; Explosionproof, Dust-Ignitionproof UNILETS for use with Threaded Metal Conduit.
-2 Conduit Outlet Boxes and Bodies: Malleable Iron or Aluminum; UNILETS for use with Threaded Metal Conduit. Applications Meet a wide range of classified area requirements. Corrosion-resistant ideal indoors
More informationCorrosion Protection for Electrical Conduit and Fittings
Easy access for pulling, splicing, mounting and maintenance! 3 4" LB Form 8 conduit body and cover 2 1 2" LB Form 8 conduit body and cover OCAL-BLUE Double-Coat Conduit Bodies With OCAL-BLUE Double-Coat
More informationPowertite Series Pin and Sleeve Plugs, Connectors and Receptacles
Applications Designed to supply power to portable or fixed electrical equipment such as motor generator units, welders, pumps, compressors, cellular relay stations, and similar apparatus. Ideal for use
More informationTwist Lock - Explosion Proof - Dust Ignition Proof Receptacle Assembly
Twist Lock - Explosion Proof - Dust Ignition Proof Receptacle Assembly Part #: EPO-25A The Larson Electronics EPO-25A explosion proof power outlet provides a durable and secure weatherproof power connection
More informationIn This Section. and. Fittings & Non-Metallic Rigid Conduit Fittings and Accessories. Steel City Fittings
In This Section and Steel City Overview...F-2 F-3 Thinwall Conduit (EMT)...F-4 F-9 Rigid/Intermediate Grade Conduit...F-0 7 Flexible Cord and Power Cable Connectors...F-8 Liquidtight Flexible Metal Conduit
More informationPowertite Series Pin and Sleeve Plugs, Connectors and Receptacles
Applications Designed to supply power to portable or fixed electrical equipment such as motor generator units, welders, pumps, compressors, cellular relay stations, and similar apparatus. Ideal for use
More informationPowertite Series Pin and Sleeve Plugs, Connectors and Receptacles
Applications Designed to supply power to portable or fixed electrical equipment such as motor generator units, welders, pumps, compressors, cellular relay stations, and similar apparatus. Ideal for use
More informationALUMINUM OUTLET BODIES
KILLARK GEB SERIES ALUMINUM OUTLET BODIES * Class I, one I, Groups IIC, IIB, IIA Type 4X Applications GEB series conduit boxes are installed in conduit systems within hazardous areas to: Protect conductors
More informationAluminum and Steel Liquidtight Strain Relief Cord and Cable Connectors
Application Provide a liquidtight and strain relief termination for flexible type neoprene, hypalon, and PVC jacketed power or control cord and cable. For use in wet or dry locations sealing electrical
More informationEPOXY POWDER COATED COPPER FREE ALUMINUM
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 AJA510 Alum MTG Unilet Appleton/Oz Gedney Catalog Number Manufacturer Description Weight per unit Product Category Features
More informationPowertite Series Pin and Sleeve Plugs, Connectors and Receptacles
Applications Designed to supply power to portable or fixed electrical equipment such as motor generator units, welders, pumps, compressors, cellular relay stations, and similar apparatus. Ideal for use
More informationCommercial Products. New Products in the Commercial Products Product Line
Commercial Products Section A complete solution combining reliability and expertise in every product, providing you with labor and maintenance savings, simplified installation, and improved productivity
More informationDevice Utility Finished FS Gang Conduit Bodies and Covers KO Seals Reducing Washers
Device Utility Finished FS Gang Conduit Bodies and Covers KO Seals Reducing Washers Mulberry Outlet Box Covers New in this catalog: A full line of die-cast, powder painted conduit bodies: 1/2-4, threaded
More informationConduit Bushings for Rigid Metal Conduit and IMC
Applications Used with a locknut to terminate rigid metal conduit or IMC conduit to a box or enclosure. Features Provides a smooth pulling surface. Material/Finish BU: malleable iron/zinc electroplated
More informationACP1034CD 100A 3W4P P&S Plug (600VAC/250VDC)
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 ACP1034CD 100A 3W4P P&S Plug (600VAC/250VDC) Appleton/Oz Gedney Catalog Number ACP1034CD Manufacturer Appleton/Oz Gedney
More informationCondulet Single Gang Cast Device Boxes With and Without Mounting Lugs for Threaded Rigid and IMC Conduit
Condulet Single Gang Cast Accessories Pages to 44 F Application: Cast device boxes are installed to: accommodate wiring devices act as pull boxes for conductors in a conduit system provide openings to
More informationProduct Description. Junction Boxes...V1-V23 Meter and Instrument Enclosures...V24-V33
SECTION V INDEX Product Description Page Number Junction Boxes......................................V-V2 Meter and Instrument Enclosures.......................V24-V Control Centers.....................................V4-V9
More informationACP6034BC 60A 3W4P P&S Plug (600VAC/250VDC)
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 ACP6034BC 60A 3W4P P&S Plug (600VAC/250VDC) Appleton/Oz Gedney Catalog Number Manufacturer Description Weight per unit
More informationNon-Metallic, Armored Cable, and Flexible Metallic Conduit Fittings
Non-Metallic Sheathed Cable and Portable Cord Connectors Non-Metallic Sheathed Cable Connectors Armored Cable and Flexible Connectors Armored Cable and Flexible Connectors Armored, Metal Clad, and Non-Metallic
More informationArktite Heavy Duty Circuit Breaking Plugs and Connectors
Arktite Heavy Duty Circuit Breaking Plugs and Connectors 60 A, 600 VAC/250 VDC, 50**-400 hertz Dimensions Page 968 1P Plug Connector Mating APJ Plugs Mating APR Connectors Style 1 Description Cat. # Dia.
More information320A Single Phase URD Meter Loop Installations
320A Single Phase URD Meter Loop Installations Location: The meter loop shall be mounted on the side of the pedestal facing the consumer's lot. (The side being one of the four flat surfaces of the pedestal
More informationF Series Terminators and Accesories
F Series Terminators and ccesories Our "F" series terminators are passive electronic circuitry designed to block 60 cycle and terminate RF signals on unused equipment ports. They are necessary to prevent
More informationEY, EYD, & ENY Series
EY, EYD, & ENY Series SELING For Harsh & Hazardous Environments Z H LO C EY SERIES SELING ENY ENY with Nipple (For Vertical or Horizontal Conduit) EY EY with Nipple (For Vertical Conduit) ENY-2 (Fixture
More informationApplications Mill Mill Mill Mill. 9007T Convertible sequence. L100 Fixed sequence. Extra heavy duty contact ratings. Extra heavy duty contact ratings
Selection Guide Severe Duty Mill and Foundry Switches pplications Mill Mill Mill Mill Design 9007T Convertible sequence L0 Fixed sequence L14 Single Cable Pulls Fixed sequence L525 elt Conveyor Fixed sequence
More informationOperator Enclosures. Console Type 12 - AW-14 Data Sheet
Console Data Sheet Construction Console body, panel cover and door, top assembly and writing desk are fabricated from (14) gauge steel ll continuous welded seams are finished smooth Panel cover is secured
More informationELMGR Compact Fluorescent Series Element Rodded Metal over Glass (glass lined) High Bay
Type No. Catalog No. Job. Name ELMGR Compact Fluorescent Series Element Glass (glass lined) High Bay PPLICTIONS pplications include large and small retail facilities, lobbies, conference rooms, auditoriums
More informationSeries 2, 3, 4, & 5 Aluminum - Accessories
The following is a list of accessories and fittings that can be provided with S8 tray. For more information on these items, contact our Engineering Department. Fittings Horizontal Bends 30 Bends with 24,
More informationCable Connectors & Conduit Sealing Bushings
RA1 Cable Terminators General Information Purpose: Cable Terminators and Sealing Fittings are used on conduit ends and cable ends to effectively seal the cable and conduit. Where Installed: Wherever the
More informationSeries 2, 3, 4, & 5 Aluminum - Accessories
Wedge Lock Splice Plates Standard 4-hole pattern. Furnished in pairs, with hardware. One pair including hardware provided with each section. Boxed in pairs with hardware. For field installation drill 13
More informationElectrical Accessories
complete system of top quality, time saving products, designed for surface metal raceways, lighting and cable supports. Innovative designs offer many installation advantages. -Line s surface raceways are
More informationPRODUCT CATALOG. 2010, Halex/Scott Fetzer Company TABLE OF CONTENTS. LIQUID Liquid-Tight Conduit Fittings
Electrical Metallic Tubing Fittings MC & C Cable & Flexible Metallic Conduit Fittings Non-Metallic Sheathed Cable Fittings Liquid-Tight Conduit Fittings Rigid & Intermediate Metallic Conduit Fittings Service
More informationCable Supports. Requirements for Cable Supports in the National Electrical Code reads as follows:
QA1 General Information are used to support cables in vertical raceways or risers. Cable supports relieve the strain that would be placed on terminations, the interior of panels, or other devices to which
More informationControl Circuits Connectors Type SK & SKW Overview
Control Circuits Connectors Type SK & SKW Overview 20 Amp, 250 Volts AC or DC, 600 Volts AC Max. Rating Load-Breaking Multi-Circuit Receptacles, Plugs, Connectors and Inlets Features and Benefits Type
More informationAKRON ELECTRIC, INC. CONDUIT PRODUCTS GR SERIES... EYS SERIES... TU SERIES... XBD-50 SERIES...
CONDUIT PRODUCTS F GR SERIES... EYS SERIES... TU SERIES... XBD-50 SERIES... 1025 Eagon St. Barberton, Ohio 44203 Ph:(330) 745-8891 Fax:(330) 745-2504 Toll Free:(800)-275-2535 06/09/03 NEW PRODUCT IN STOCK
More informationSpring-loaded cover seats against neoprene gasket.
U-Line Factory Sealed 20 Amp Plugs and Receptacles Dead-Front Safety Construction. Choice of Aluminum or Thermoplastic Polyester Plug. Class I, Division 1 and 2 Groups B, C, D NEMA 3, 3R, 7BCD, 9FG Plugs
More informationTHREE PHASE MOTORS RIGID BASE GENERAL PURPOSE Rigid Base
THREE PHASE MOTORS DRIP-PROOF RPM 60 HP Hz 1/4 1725 1725 S56 100027 $246 A 16 208-230/460 1.4 58.0 9.24 1/3 3450 48 101447 251 A 14 208-230/460 1.4 68.0 9.00 1725 48 100446 266 A 17 208-230/460 1.6 64.3
More informationSeries 2, 3, 4, & 5 Steel - Accessories
- ccessories Splice Plates Standard 8-hole pattern for all steel splice plates. One pair including hardware provided with straight section. Boxed in pairs Expansion Splice Plates Expansion plates allow
More informationReceptacle housing and cover optional malleable iron on EFS-M Series. Spring-loaded cover seats against neoprene gasket.
U-Line Factory Sealed 20 Amp Plugs and Receptacles Dead-Front Safety Construction. Choice of Aluminum or Thermoplastic Polyester Plug. Class I, Division 1 and 2 Groups B, C, D NEMA 3, 3R, 7BCD, 9FG Applications
More informationElectrical Fittings & Supplies
Electrical Fittings & Supplies 12802 Commodity Place Tampa, FL 33626 813-664-9700 www.atlanticind.net The Atlantic Story Atlantic Industrial LLC, a division of QSSI, Inc., is an Americanowned and operated
More informationU-Line Contender Factory Sealed 20 Amp Plugs and Receptacles Explosionproof, Dust-Ignitionproof
U-Line Contender Factory Sealed 20 Amp Plugs and Receptacles Explosionproof, Dust-Ignitionproof Class I, Groups C, D Class I, Division 2, Group B Class I, Zone 1, Group IIB Class I, Zone 2, Group IIB +
More informationMC, MCX & TCX Series ARMORED & UNARMORED CABLE GLANDS. Innovated Reliable Connectivity
MC, MCX & TCX Series RMOR & UNRMOR CBL GLNS Innovated Reliable Connectivity KILLRK Z H LO C MC SRIS LUMINUM CBL CONNCTORS MC Class II, iv. 1 & 2, Groups, F, G Class III Class I, Zone 2, Group IIC, Zone
More informationW-Series Junction Boxes
W-Series Junction Boxes Application and Selection Junction boxes, designed for hazardous and non-hazardous locations, are used in a variety of industries to perform the following functions: As a pull box
More informationReceptacle housing and cover optional malleable iron on EFS-M Series. Spring-loaded cover seats against neoprene gasket.
U-Line Factory Sealed 20 Amp Plugs and Receptacles Dead-Front Safety Construction. Choice of Aluminum or Thermoplastic Polyester Plug. Class I, Division 1 and 2 Groups B, C, D NEMA 3, 3R, 7BCD, 9FG Applications
More informationSolenoid pilot operated spring return inline valves with nonlocking overrides, 120V, 60 Hz, and cablegrip connector
1/4" to 2" Solenoid Pilot ctuated VLVES High flow - Cv of 1.2 to 49.5 Durable, robust construction 1/4" to 2" ports (SPP, PTF, or ISO Rc threads) Wide range of voltages available Four functional types:
More information1E EJB Junction Boxes Cl. I, Div. 1 and 2, Groups B, C, D
Cl. I, Div. and 2, Groups B, C, D Cl. II, Div., Groups E, F, G Cl. II, Div. 2, Groups F, G Cl. III NEMA 3, 4, 4*,, Ex d IIB + H2 T, IP Explosionproof Dust-Ignitionproof Raintight Wet Locations Applications:
More informationBenefits. Safety. Durability. Performance. Russellstoll. Heavy Industrial/ Marine
eavy Industrial/ Marine Benefits builds a variety of benefits into one plug, receptacle and interlock system for your application. Safety Waterproof construction: standard neoprene O ringed interior components
More informationArktite Circuit Breaking CPS Receptacles and CPP Plugs Delayed Action Factory Sealed
Arktite Circuit Breaking CPS Application: CPS receptacles, angle and straight types, and CPP plugs are used: with portable electrically operated devices such as motor-generator sets, compressors, conveyors,
More informationBulletin 1494F Fixed-Depth Flange-Mounted Disconnect Switches. Selection Guide
F Fixed-Depth Flange-Mounted Disconnect Switches Selection Guide F Fixed-Depth Flange-Mounted Disconnect Switches Product Cat. No. 1494F-N Disconnect Switch with Cat. No. 1494F-F Fuse Block Adapter Plate
More informationRigid Metal Conduit, IMC or EMT K-Clamps
65178 Rigid Metal Conduit, IMC or EMT K-Clamps Wt. Lbs. Std. Catalog No. Size (In.) Per 100 Pkg. Right Angle Type Right Angle Type Hot Dip/Mechanically Galvanized* For Rigid, IMC, EMT PC-50RA 1/2 37.0
More informationNumber Tube I.P.S. Rod Size or O.D. Range Cable H J W
TYPE GAR D-28 FENCE POST GROUNDING CONNECTOR For Parallel or 90 Copper Cable Connection To Rod or Pipe with the Same Connector High copper alloy ground connector for joining a range of cable, parallel
More informationTaxonomies, Classifications, and Categories CIRCUIT BREAKING, COMPRESSOR, CONVEYOR, MOTOR GENERATOR SET, POLARIZED, WELDER
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 AP20467S22 3W-4P 200A Plug Cooper Crouse-Hinds Catalog Number AP20467S22 Manufacturer Cooper Crouse-Hinds Description
More informationContender Series Factory Sealed Control Stations and Pilot Lights Explosionproof, Dust-Ignitionproof Furnished with Internal Ground Screw.
Contender Series Factory Sealed Control Stations and Pilot Lights Furnished with Internal Ground Screw. Applications Push buttons and selector switches are used in conjunction with contactors or magnetic
More informationAE Series Pin and Sleeve Plugs, Connectors and Receptacles Weatherproof 600 Vac, 250 Vdc. Pressure Wire Terminals.
AE Series Pin and Sleeve Plugs, Connectors and Receptacles 600 Vac, 250 Vdc. Pressure Wire Terminals. Applications Designed to supply power to portable or fixed electrical equipment such as: Welders Generators
More informationTaxonomies, Classifications, and Categories MYER'S HUB, 3-PIECE COUPLINGS, THREADLESS COUPLINGS AND THREADLESS CONNECTORS
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 NTCC125 1-1/4" Rigid Threadless Raintight Coupling ppleton/oz Gedney Manufacturer Description Weight per unit Product
More informationIEC 309 Plugs, Connectors, Receptacles, and Inlets
IEC 309 Plugs, Connectors, Receptacles, and Inlets Applications: Where complete protection against dirt, dust, and water jets is required In damp or corrosive locations In areas prone to vibration, hard
More informationCam-Lok Single Pole Connectors
Cam-Lok Single Pole Connectors Cooper Interconnect Cam-Lok Single Pole Connectors are specially designed to provide the ultimate in reliable service, even under the most severe operating conditions. These
More informationArktite Heavy Duty Circuit Breaking Plugs and Receptacles
1P Arktite Heavy Duty Circuit Breaking s and Receptacles Industrial Heavy Duty Non-Hazardous Areas Application: Arktite circuit breaking plugs and receptacles are used: to supply power to portable electrically
More informationNATURAL HIGH IMPACT STRENGTH COPPER FREE ALUMINUM Number of Wires VAC AT 50 TO 400 HZ/250 VDC
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 AllenWatson@elliottelectric.com AR331 30 Amp Pin & Sleeve Recpt 3-W 3-P 250VDC/600vac Cooper Crouse-Hinds Catalog Number
More informationCable & Wire Management
able & ire Management able & ire Management Lay-In ireway Type 1 Screw over... 8-14 Lay-In ireway Type 1 Quick-onnect inge over... 15-20 Lay-In ireway Type 3R EnviroShield... 21-24 Lay-In ireway Type 12...
More informationUNDERGROUND SERVICE ENTRANCE LOCATION. No meter base or entrance should be installed before an KREMC engineer has checked the proposed location.
UNDERGROUND SERVICE No meter base or entrance should be installed before an KREMC engineer has checked the proposed location. Entrance cabinet must be directly through wall or directly under meter in basement.
More informationGeneral Cable Support Information
General Cable Support Information Applications Used to support cables in vertical raceways or risers. Relieves the strain that would be placed on terminations, the interior of panels, or other devices
More informationArktite Heavy Duty Circuit Breaking Plugs and Receptacles
Arktite Heavy Duty Circuit Breaking Plugs and Receptacles Industrial Heavy Duty Non-hazardous Areas Applications: Arktite circuit breaking plugs and receptacles are used: To supply power to portable electrically
More informationTechnical Information. Check Valves. E Check Valves. Selection Guide. Features. Crack Pressure. Applications E-4
Technical Information Pressure at inlet port. Poppet is moved off seat. low is allowed through valve. Selection Guide Seat Poppet Rated Crack Body Size Material Pressure Pressure CV Series 1/4-1" Steel
More informationCapella 3. Project Name. Construction. Optical System. Product Applications
Product # Type Date Project Name Project Location Capella 3 Construction Housing and lens frame are constructed from heavy-duty low copper die-cast aluminum. Material is structurally rigid and uniformly
More informationExplosion Proof Receptacle - Integral Circuit Breaker - Class 2 Division 1-30 Amp 480VAC
9419 E US HWY 175, Kemp, TX 75143 Phone: 1 8003696671 Fax: 903.498.3364 Email: sales@larsonelectronics.com Explosion Proof Receptacle Integral Circuit Breaker Class 2 Division 1 30 Amp 480VAC Part #: EPO3W4P30AICB
More informationCable Connectors & Conduit Sealing Bushings
RA1 Cable Terminators General Information Purpose: Cable Terminators and Sealing Fittings are used on conduit ends and cable ends to effectively seal the cable and conduit. Where Installed: Wherever the
More informationPowertite Series Pin and Sleeve Plugs, Connectors and Receptacles
Powertite Series Pin and Sleeve Plugs, Connectors and Receptacles Applications Designed to supply power to portable or fixed electrical equipment such as motor generator units, welders, pumps, compressors,
More informationArktite Heavy Duty Circuit Breaking Plugs and Receptacles
Arktite Heavy Duty Circuit Breaking Plugs and Receptacles Industrial Heavy Duty Non-hazardous Areas Applications: Arktite circuit breaking plugs and receptacles are used: To supply power to portable electrically
More informationArktite Heavy Duty Circuit Breaking Plugs and Receptacles
Arktite Heavy Duty Circuit Breaking Plugs and Receptacles Industrial Heavy Duty Non-hazardous Areas Applications: Arktite circuit breaking plugs and receptacles are used: To supply power to portable electrically
More informationELECTRICAL ACCESSORIES FOR 1 5 8" (41 MM) WIDTH SERIES CHANNEL
ELECTRICL CCESSORIES FOR 5 8" (4 MM) WIDTH SERIES CHNNEL Page Electrical Fittings Receptacles Fixture Hangers ccessories and Connectors Junction Boxes In-Channel Joiners Swivel Hangers Cable Entrance Tubing
More informationD2P and EWP Factory Sealed Circuit Breaker Panelboards Explosionproof, Dust-Ignitionproof, Watertight, Corrosion-Resistant
Applications Protection and control of electrical equipment and circuits such as lighting and heat tracing in hazardous locations or in damp, wet or corrosive conditions. D2P Series designed for use in
More informationVR A 3W 4P Receptacle. Long Description. Manufacturer Information. Taxonomies, Classifications, and Categories
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 Catalog Number Manufacturer Description Weight per unit Product Category Descriptions Description Long Description Product
More informationAC METRIC (IEC) MOTORS THREE PHASE
These high efficiency motors meet North American performance standards and EPACT energy efficiency mandates, and have.5 service factors. Typically used for replacement on machine tools, textile machinery
More informationSeries 1 Steel - Accessories
- ccessories Standard (L-Shaped) Splice Plates One pair including hardware provided with each section. Prepackaged in pairs in a plastic bag, with hardware. 4-hole pattern L-shaped splice plates. L-shaped
More information003 3 foot foot RUN Nominal Length* * For actual lengths see
M125 Project: Type: Qty: Series Lamping Shielding Mounting Nominal Length Finish Voltage Options Series Lamping Shielding Mounting Nominal Length Finish Voltage Options M125 (M125/9 Direct) Multi-Mount
More informationPowertite Series Pin and Sleeve Plugs, Connectors and Receptacles
Powertite Series Pin and Sleeve Plugs, Connectors and Receptacles Applications Designed to supply power to portable or fixed electrical equipment such as motor generator units, welders, pumps, compressors,
More informationSc h rader Bellows. CS Series Air Control Valves. 2 & 3-Way, Inline, Manifold & Stacking Direct Acting Solenoid Valves
Sc h rader Bellows 2 & 3-Way, Inline, Manifold & Stacking Direct cting Solenoid Valves INDEX PGE Features Inline Valves... 3 Stacking Valves... 4 Manifold Valves... 5 Valve Model Number System... 6 Solenoid
More informationMipco Connections for Refrigerated Containers. No One Does It Like Mipco. The Mipco. Advantage. Reliability. Safety. Easy Installation & Service
No One Does It Like Mipco Mipco Interlocked Reefer Power Outlets are used extensively in port terminals and shipboard applications to provide a safe, watertight electrical connection for refrigerated containers.
More informationamericanfittingscorp.com t: e:
Reusable Fittings / Straight Connectors Size Range: 3/8 to 5 Liquid Tight Connectors Reusable Fittings Industrial specification grade, screw machined steel, zinc plated UL Rated Liquid Tight Includes sealing
More information