PIPE/CONDUIT CLAMPS, SUPPORTS AND HANGERS FOR 1 5 8" (41 MM) WIDTH SERIES CHANNEL

Transcription

1 PIPE/CONDUIT CLMPS, SUPPORTS ND HNGERS FOR 5 8" (4 MM) WIDTH SERIES CHNNEL Page Pipe/Conduit Clamps Pipe Hangers Pipe Rollers Pipe Brackets Reference Tables MTERIL Unistrut pipe supports, unless noted, are punch-press made from hot-rolled, pickled and oiled steel plates, strip or coil, and conform to STM specifications 66, 575, 576, 65, or 6. The fitting steel also meets the physical requirements of STM 570 GR. The pickling of the steel produces a smooth surface free from scale. Many items are also available in stainless steel. Consult factory for ordering information. FINISHES Pipe supports are available in: electro-galvanized (EG), conforming to STM B6 Type III SC; Hotdipped galvanized (HG), conforming to STM 2 or 5; Perma-Green II (GR), and plain (PL). PPLICTION Unistrut pipe clamps, pipe hangers, brackets and rollers are designed for the support of electrical and mechanical services. Supports to meet nearly every requirement can be attained using Unistrut Metal Framing components. DIMENSIONS Imperial dimensions are illustrated in inches. Metric dimensions are shown in parenthesis or as noted. Unless noted, all metric dimensions are in millimeters and rounded to one decimal place. DESIGN BOLT TORQUE BOLT SIZE FOOT LBS. N. m 4" " 8 5 8" " " 00 Note: When tightening 4" screws used with a two piece pipe clamp, a torque of 5 foot pounds (60 inchpounds) should be used. DESIGN LOD Design load data, where shown, is based on the ultimate strength of the connection with a safety factor of 5.0, unless otherwise noted "

2 PIPE/CONDUIT CLMPS FOR 5 8" (4 MM) WIDTH SERIES CHNNEL P0 thru P26 Design Load Finish: Electro-galvanized. P2 thru P27 4" (.8) Slotted hex head screw and nut included. Pipe Size PIPE CLMPS FOR RIGID STEEL CONDUIT O.D. Size Thickness Weight/C Design Load Number In In mm Gage mm Lbs kg Lbs kn P P P P P P P P P P P P P P UNIVERSL CLMPS FOR RIGID OR THINWLL CONDUIT Design Load Slotted hex head screw and nut included. Finish: Electro-galvanized. P425 thru P4 Design Load Slotted hex head screw and nut included. Finish: Electro-galvanized. 4" (.8) 4" (.8) Pipe/Conduit Size Thickness Weight/C Design Load Number In Gage mm Lbs kg Lbs kn P P P P P P PIPE CLMPS FOR THIN WLL CONDUIT (E.M.T.) Pipe O.D. Size Thickness Weight/C Design Load Size Number In In mm Gage mm Lbs kg Lbs kn P P P P P P P P P P P

3 PIPE/CONDUIT CLMPS FOR 5 8" (4 MM) WIDTH SERIES CHNNEL P2024 thru P Design Load PIPE CLMPS FOR O.D. TUBING 4" (.8) Slotted hex head screw and nut included. Finish: Electro-galvanized. P P202 P200 - P205 P207 - P2052 P205 - P2066 P P ga. 4 ga. 2 ga. ga. 0 ga. Number O.D. Size Weight/C In mm Lbs kg P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P Design Load Lbs (kn) 400 (.8) 600 (2.7) 800 (.6) 000 (4.4) Number O.D. Size Weight/C In mm Lbs kg P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P Design Load Lbs (kn) 000 (4.4) PIPE CLMPS IN SPECIL MTERILS P0, P2, P425, P2024 SERIES dd Suffix Material To "P" Number Example Steel Strap, Everdur Hardware E P0 E Copper Coated Steel Strap & Hardware CC P0 CC luminum L P0 L Stainless Steel 04 or 6 SS or ST P0 SS Plastic Coated Steel Straps PC P0 PC 0

4 PIPE/CONDUIT CLMPS FOR 5 8" (4 MM) WIDTH SERIES CHNNEL P56 thru P57 PRLLEL CLMPS FOR RIGID CONDUIT ND PIPE 8" (4.) Number Pipe Size O.D. Size Thickness Weight/C In In mm Gage mm Lbs kg Slotted hex head screw and nut included. Finish: Electro-galvanized. P P P P P P P P P P P P2008 thru P2020 ONE HOLE CLMP FOR O.D. TUBING 4" X 4" Round Head Machine Screw and Channel Nut Not Included Finish: Electro-galvanized. Number O.D. Tube Size Thickness Weight/C In mm Gage mm Lbs kg P P P P P P P P

5 PIPE/CONDUIT CLMPS FOR 5 8" (4 MM) WIDTH SERIES CHNNEL P thru P Design Load SINGLE PIECE PIPE STRP C Hole Size B Supporting Rib on P , P , P Hardware sold separately. ± 8" Number Nominal Pipe Size "" "B" "C" Thickness Weight/C In In mm In mm In mm In (mm) Lbs kg Lbs (kn) P P " 26.8 P (.2) 4. P P P P P P " (6.4) P P P Design Load 500 (2.2) 000 (4.4) P260 thru P267 P2426 thru P24 UNI-CLIP SUPPORT Material: Stainless steel type 0. UNI-CLIP SUPPORTS FOR RIGID STEEL CONDUIT Conduit Size O.D. Size Weight/C Number In In mm Lbs kg P P P P P P P The Uni-Clip supports exceed load requirements for merican Standard Code for Pressure Piping (67), and National Electric Code (7). Patent No UNI-CLIP SUPPORTS FOR THINWLL CONDUIT (E.M.T.) Conduit Size O.D. Size Weight/C Number In In mm Lbs kg P P P P P P

6 PIPE/CONDUIT CLMPS FOR 5 8" (4 MM) WIDTH SERIES CHNNEL P40 thru P47 STND-OFF PIPE CLMPS Hardware included. C D E Pipe Clamp 4" Wide B Load "D" Load "E" Number Lbs kn Lbs kn P P P P P P P Finish: Electro-galvanized. Patent No Safety factor of 5 Number Pipe Size O.D. Size "" "B" "C" Weight/C In In mm In mm In mm Gage mm Lbs kg P P P P P P P M5025 thru M5060 ONE-PIECE CBLE & CONDUIT CLMPS B C Finish: Electro-galvanized. Number Max O.D. Size "" "B" "C" Weight/C In mm In mm In mm Gage mm Lbs kg M M M M M M M M M M M M M M M

7 UNICUSHION FOR 5 8" (4 MM) WIDTH SERIES CHNNEL P2600 UNICUSHION : ISOLTION MTERIL 25 feet per carton. Cut to length as shown in charts. Wt/Carton 2.5 Lbs (. kg) CLMP SELECTION & CUTTING GUIDE EMT CONDUIT Nominal Use with Unicushion Length Size Clamp In mm 8" P " P " P " P " P " P " P STNDRD PIPE OR RIGID CONDUIT Nominal Use with Unicushion Length Size Clamp In mm 8" P " P " P " P " P " P " P " P " P " P " P " P " P UNICUSHION FETURES Shock absorption Protection from corrosion and abrasion llowance for expansion and contraction Sound and vibration isolation Stability in use from - 50 F (-47 C) to + 50 F (+77 C) Flexible elastomer material Will not support combustion COPPER TUBING TYPE K OR L Nominal Use with Unicushion Length Size Clamp In mm 4" P " P " P " P " P " P " P " P " P " P " P " P " P " P " P " P

8 UNICUSHION FOR 5 8" (4 MM) WIDTH SERIES CHNNEL CLMP SELECTION & CUTTING GUIDE O. D.TUBE O. D.TUBE O. D. Size Use With Unicushion Length O. D. Size Use With Unicushion Length Clamp Clamp In mm In mm In mm In mm P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P

9 PIPE/TUBING CLMPS FOR 5 8" (4 MM) WIDTH SERIES CHNNEL 004T008 thru 08N06 00N02 thru 06N4 CUSH--CLMP SSEMBLY Controlled Squeeze Shoulder Bolt Includes cushion, clamp and hardware. Materials: Clamp: Electro-galvanized or stainless steel. Cushion: Thermoplastic elastomer. B C TUBE SERIES PIPE SERIES DIMENSIONS ssembly Copper & Copper Steel Tube Water Pipe Number O. D. Size (Nominal) 004T T T T T T T020 08T T T N N N N N N N N N N N N N N N N N N ssembly Number Nominal Pipe Size "" "B" "C" In mm In mm In mm Lbs kg N N N N N N N N N N N N N N Weight/C Numbers are "coded" to designate cushion size and clamp size. Patent Numbers: 4,56,26; 4,4,65 Examples: 004T Cushion Size 4 6" (6.4) 00N Cushion Size 6" (4.) T - With Controlled Squeeze Shoulder Bolt N - With Standard Bolt Clamp Size 8 6" (2.7) 02 - Clamp Size 2 6" (.) 6

10 PIPE/TUBING CLMPS 004M007 thru 04M040 CUSH--CLMP SSEMBLY OMEG SERIES C E B D Includes clamp and cushion. Materials: Clamp: Electro-chromate or stainless steel. Cushion: Thermoplastic elastomer. Patent Pending. Number 004M M M0 00M0 02M05 04M07 06M0 08M020 08M02 020M024 02M M M M00 027M02 028M02 00M04 02M06 04M040 08M044 Copper Copper Pipe Dimensions & Steel Water Size Tubing Pipe (Nominal) "" "B" "C" "D" "E" Weight/C O. D. (Nominal) In In In In mm In mm In mm In mm In mm Lbs Kg Note: Not intended for use with metal framing components. Can be mounted to any flat surface. 7

11 PIPE/TUBING CLMPS UB 2P thru UB2P CUSH CLMP SSEMBLY U-BOLT SERIES 0 (0.7π) 0 (0.7π) B D C 2" thru 6" assembly. B D C Includes U bolt, cushion, and hardware. 8" thru 2" assembly. Materials: U Bolt: Electro-galvanized finish. Cushion: Thermoplastic elastomer. Number UB/2P UB/4P UBP UB-/4P UB-/2P UB2P UB2-/2P UBP UB-/2P UB4P UB5P UB6P UB8P UB0P UB2P Pipe Dimensions Size (Nominal) "" "B" "C" In In mm In mm In mm UNC-2B UNC-2B UNC-2B UNC-2B UNC-2B UNC-2B UNC-2B UNC-2B UNC-2B UNC-2B UNC-2B UNC-2B UNC-2B UNC-2B UNC-2B "D" Note: Not intended for use with metal framing components. 8

12 PIPE HNGERS FOR 5 8" (4 MM) WIDTH SERIES CHNNEL J205 thru J280 J205 N thru J 280 N (Plastic Coated) "J" CONDUIT ND PIPE HNGER Rod Size Listed "T" Bolt Size as Listed B F D G Plastic Coated ("N" Suffix) Plastic Coated C "T" Bolt and Nut Included IMPERIL E Hanger Rod Suspended Pipe Load Lbs/C Lbs/C Number Number Size "" "B" "C" "D" "E" "F" "G" Lbs J J205 N x J207 2 J207 N x J20 24 J20 N* x J22 27 J22 N x 4 2 J25 2 J25 N* x 2 2 J220 J220 N* x 4 2 J225 7 J225 N x J20 78 J20 N* x 5 6 J25 85 J25 N x J J240 N* x J250 J250 N x J260 2 J260 N* x J J280 N x x x x x x x x x x x x x x METRIC kg/c kg/c Pipe Load "" "B" "C" "D" "E" "F" "G" Number Number Size kn J205. J205 N x x J207.5 J207 N x x J20 0. J20 N* x x J J22 N x x J25.2 J25 N* x x J J220 N* x x J J225 N x x J J20 N* x x J J25 N x x J J240 N* x x J J250 N x x J J260 N* x x J J280 N x x *Standard glass drainline and glass process pipe sizes. Minimum safety factor of five (5) on ultimate load.

13 PIPE ROLLERS FOR 5 8" (4 MM) WIDTH SERIES CHNNEL M0 & M 4" (82.6) 4 5 8" (7.5) SWIVEL CEILING FLNGES Supports 8", 2", 5 8", 4", 7 8" hanger rods. 4" (82.6) 5 8" (4.) 6" (.7) UL 4 5 8" (7.5) H 4" (.) For pipe sizes 4" to 2". 20 (0.π) 0 (0.7π) Material: Malleable Iron. Note: See page 77 for swivel nuts. Wt/C 40 Lbs (8. kg) Number Mounting Hole "H" Weight/C Design Load Bolt Size In mm Lbs kg Lbs kn M0 8 M Patent No P2474 PIPE ROLLER FOR 2" - 4" PIPE Saddle by others. Requires 2 each 2" x 5 6 " bolts and 2" channel nuts per assembly. Sold separately. Sold in pairs. Design Load 500 Lbs (2.2 kg) 2 2" (6.5) CHRT FOR DIMENSION Wt/C 268 Lbs (2.6 kg) Cast iron rollers. Pipe Insulation Thickness Size No Insulation " (25.4) 2" (8.) 2" (50.8) 2 2" (6.5) " (76.2) 4" (0.6) In In mm In mm In mm In mm In mm In mm In mm Hole Size Hole Spacing Width Thickness 6" Diameter 6" (20.6 mm) From End 5 8" 4" 4. mm 7 8" (47.6 mm) On Center 4. mm 6.4 mm 40

14 PIPE ROLLERS FOR 5 8" (4 MM) WIDTH SERIES CHNNEL P2474- thru P PIPE ROLLER FOR " - 8" PIPE Saddle by others. 2 2" (6.5) Pipe roller will fit standard saddles. Select proper roller from chart. Requires 2 each 2" x 5 6 " bolts and 2" channel nuts per assembly. Sold separately. Design Load 750 Lbs (. kn) s are shipped loose and are easily assembled when installed. Number "" Weight/C In mm Lbs kg P P P P CHRT FOR ROLLER PRT NUMBER SELECTION Pipe Size Insulation Thickness In No Insulation " (25.4) 2" (8.) 2" (50.8) 2 2" (6.5) " (76.2) 4" (0.6) 2 P2474- P2474- P2474- P P2474- P2474- P2474- P P2474- P2474- P2474- P P2474- P2474- P2474- P P2474- P2474- P P P P2474- P2474- P P P P2474- P2474- P P P P2474- P P P2474- P2474- P P2474- P P P2474- P2474- P P2474- P P P2474- P2474- P P P2474- P2474- P2474- P2474- P P P P2474- P2474- P2474- P2474- P P P P2474- P P P P P Hole Size Hole Spacing Width Thickness 6" Diameter 6" (20.6 mm) From End 5 8" 4" 4. mm 7 8" (47.6 mm) On Center 4. mm 6.4 mm 4

15 PIPE ROLLERS FOR 5 8" (4 MM) WIDTH SERIES CHNNEL P2475 2" (50.8) Sold in pairs. Requires 2 each 2" x 5 6 " bolts and 2" channel nuts per assembly. Sold separately. PIPE ROLLER FOR 6" - 6" PIPE Material: Cast iron rollers. Design Load 500 Lbs (6.7 kn) " (76.2) Saddle by others. 2" 4" TO (88.) (5.) CHRT FOR DIMENSION Wt/C 680 Lbs (08.4 kg) Pipe Size In Insulation Thickness No Insulation " (25.4) 2" (8.) 2" (50.8) 2 2" (6.5) " (76.2) 4" (0.6) In mm In mm In mm In mm In mm In mm In mm P2476 PIPE ROLLER FOR 6" - 24" PIPE 2" (50.8) Requires 4 each 2" x 5 6" bolts and 2" channel nuts per assembly. Sold separately. Saddle by others. Design Load 2000 Lbs (8. kg) Material: Cast iron rollers. " (76.2) 4" (82.6) CHRT FOR DIMENSION Wt/C 046 Lbs (474.5 kg) Pipe Size In Insulation Thickness 2" (8.) 2" (50.8) 2 2" (6.5) " (76.2) 4" (0.6) In mm In mm In mm In mm In mm Hole Size Hole Spacing Width Thickness 6" Diameter 6" (20.6 mm) From End 5 8" 4" 4. mm 7 8" (47.6 mm) On Center 4. mm 6.4 mm 42

16 PIPE BRCKETS FOR 5 8" (4 MM) WIDTH SERIES CHNNEL P248 2" (88.) 4" (6.4) For 2" pipe to 2" pipe. Design Load (Channel Upright Listed) 4" (0.6) Weight/C P000 P00 P2000 Lbs kg Lbs kn Lbs kn Lbs kn P2482 8" (.5) 4 8" (.) For 2" pipe to " pipe. Design Load (Channel Upright Listed) 4" (0.6) Weight/C P000 P00 P2000 Lbs kg Lbs kn Lbs kn Lbs kn P224 PIPE BLOCK FOR 2" (50.8) TO 8" (20.2) PIPES Hole Size 7 6" (.) " (25.4) " (76.2) Clamp Requires bolt and channel nut. Sold seperately Wt/C 40 Lbs (8. kg) Hole Size Hole Spacing Width Thickness 6" Diameter 6" (20.6 mm) From End 5 8" 4" 4. mm 7 8" (47.6 mm) On Center 4. mm 6.4 mm 4

17 PIPE/CONDUIT REFERENCE DT ELECTRICL METLLIC TUBING (EMT) - THIN WLL Tubing Size (Nominal) Outside Inside Weight Diameter Diameter Of Tubing In In mm In mm Lbs/Ft kg/m Table furnished by merican Iron and Steel Institute, New York. INTERMEDITE METLLIC CONDUIT (IMC) Conduit Size (Nominal) Outside Diameter Inside Diameter Weight Of Conduit Weight of Conduit and Conductor In In mm In mm Lbs/Ft kg/m Lbs/Ft kg/m

18 PIPE/CONDUIT REFERENCE DT RIGID STEEL (HEVY DUTY) CONDUIT Conduit I. D. Of O. D. Of O. D. Of Weight of Maximum Weight* Of Conduit Size Conduit Conduit Coupling Conduit nd Conductor (Nominal) Lead Covered Not Lead Covered In In mm In mm In mm Lbs/Ft kg/m Lbs/Ft kg/m Lbs/Ft kg/m * Maximum weight equals weight of rigid conduit plus weight of heaviest conductor combination (from the National Electrical Code Handbook.) Supports. Rigid metal conduit shall be installed as a complete system as provided in rticle 00 and shall be securely fastened in place. Conduit shall be firmly fastened within feet (4 mm) of each outlet box, junction box, cabinet, or fitting. Conduit shall be supported at least every 0 feet (.05 m). Exception: If made up with threaded couplings, it shall be permissible to support straight runs of rigid metal conduit in accordance with Table 46-2, provided such supports prevent transmission of stresses to termination where conduit is deflected between supports. Table 46-2 Support for Rigid Metal Conduit Maximum Spacing Between Pipe Supports Nominal Maximum Nominal Maximum Pipe Size Span Pipe Size Span In Ft m In Ft m The above spacing based on a combined bending and shear stress of 500 PSI when pipe is filled with water and the pitch of the line is such that a sag of 0. in. between supports is permissible. Conduit Size Maximum Distance Between Supports In mm Ft m & larger 76 & larger

19 PIPE/CONDUIT REFERENCE DT SCHEDULE 40: STEEL PIPE Pipe Size Outside Inside Pipe Pipe and Water (Nominal) Diameter Diameter Weight Weight In In mm In mm Lbs/Ft kg/m Lbs/Ft kg/m SCHEDULE 80: STEEL PIPE Pipe Size Outside Inside Pipe Pipe and Water (Nominal) Diameter Diameter Weight Weight In In mm In mm Lbs/Ft kg/m Lbs/Ft kg/m

20 PIPE & TRPEZE HNGERS REFERENCE DT SCHEDULE 40: PVC PLSTIC PIPE Pipe Size Outside Inside Pipe Pipe and Water (Nominal) Diameter Diameter Weight Weight In In mm In mm Lbs/Ft kg/m Lbs/Ft kg/m CHNNEL SELECTION FOR SPRINKLER PIPE TRPEZE HNGERS Span of Trapeze Ft (mm) 2 (460) 2 (60) 2 2 (760) (0) 4 (220) 5 (520) 6 (80) 7 (20) 8 (2440) (2740) 0 (050) Pipe Size (Nominal) In 4 In 2 In 2 In 2 2 In In 2 In 4 In 5 In 6 In 8 In 0 In P000 P000 P00 P5500 P000 P550 P000 P00 P00 P004 2-P004 Based on NFP--8 Section Modulus Table -0..7(a) For Schedule 40 Pipe Note: The table is based on a maximum allowable bending stress of 5 KSI and a midspan concentrated load from 5 ft of water-filled pipe, plus 250 lb. 47