DELTA Mixers Durable, Versatile, Dependable

Transcription

1

2 ELTA Mixers urable, Versatile, ependable ELTA Equipment manufactures a wide selection of dustrial mixers from 1/4 HP to 3 HP for tank volumes of 50 to 5000 gallons. ELTA Mixers are available air or electric powered and are constructed alumum, cast iron or staless steel. ependg on your specific requirements, ELTA Equipment can supply a fixed-mount sgle application mixer, an terchangeable multi-drive multimount mixer or the versatile ELTA 3N1 mixer that is a flange mount, drum hole entry and open tank mixer one mache. ELTA Mixers have been engeered to deliver dependable dustrial duty performance a broad range of chemical environments and are suitable for light to high viscosity fluids. With variablespeed motors, terchangeable propellers a variety of sizes and materials and design flexibility, ELTA Equipment manufactures a mixer that will seamlessly tegrate with your process. Unique Modular esign Warranty All ELTA Mixers are tested at the factory prior to shipment. Each part used their construction has been carefully checked for workmanship. If the mixer is stalled properly, it is guaranteed agast defects material and workmanship for a period of one year from the date of shipment, providg that the directions on stallation and matenance given the structions are followed. Under these conditions, elta Equipment will replace without charge any part provg defective with the guarantee period. The company will not, under any condition, be responsible for any charge for labor, repairs, or part, performed or furnished by others, nor for any consequential damages. Its liability under this warranty is limited to the cost of the part volved and no case shall exceed the origal purchase price of the equipment.

3 Quick Selection Guide To determe which ELTA portable mixer you need, locate your viscosity on the left side of the chart. Read across to fd the volume of your tank. The chart below applies to tanks with proportions similar to the sketch. Please consult your nearest elta distributor to confirm your choice of mixer. The mixer selection shown below will hold true most applications. P = direct drive PG = gear drive Tank Capacities COMMON Viscosity MATERIALS Centipoise Gasole Toluene Water 1.0 P-0 P-1 P-1 P-2 P-7 P-8 PG-4 PG-5 Blood Sulfuric Acid 100 P-0 P-1 P-2 P-5 P-8 PG-1 PG-3 PG-5 SAE 10 Oil Olive Oil 250 P-1 P-2 P-3 PG-1 P-7 PG-1 PG-1 PG-3 PG-5 PG-8 Pat Glucose 500 P-1 PG-1 P-3 P-8 P-8 PG-3 PG-4 PG-5 PG-8 Castor Oil Catsup Glycerol Molasses Corn Syrup Honey 1000 PG-1 PG-3 PG-5 PG-7 PG PG-3 PG-5 PG-7 PG PG-3 PG-5 PG-7 PG-8 Molten Glass PG-5 PG-7 PG-8 Blackstrap Molasses PG-7 PG-8

4 Model 3N1-direct or gear drive Model No. HP Voltage ph. rpm Length L ia. S ia Sgle 3N1-0 1/3 110/1/ / N1-1 1/2 110/1/ / N1-3 3/4 110/1/ / N1-0A 1/3 AIR RIVE / N1-1A 1/2 AIR RIVE / N1-2A 3/4 AIR RIVE / N1-3A 1 AIR RIVE / ia ual A B C Standard 3N1 Mixer is supplied with one propeller Common Fluids Selection Table Gasole Water Blood SAE10 Oil Olive Oil Pat Glucose Catsup Caster Oil Viscosity CPS Tank Size Glycerol Molasses 55 gal.drum 3N1-0 3N1-0 3N1-1 3N1-1 *PG-1 * 100 gal.tank 3N1-1 3N1-1 3N1-3 3N1-3 * *PG gal.tank 3N1-1 3N1-3 3N1-3 * *PG-3 *PG-5

5 Model P-direct drive elta s super duty mixers are designed for the most difficult mixg applications, especially for aggressive environments. Features Model No. HP Voltage ph. rpm Length L ia. S G A Sgle P-0 1/3 110/1/ / ual W E M Permanently greased beargs Alumum/ C.I./ 304SS Housg Variety of propellers available TEFC enclosure is standard Other enclosures are available upon request Variable speed drives are also available P-1 1/2 110/1/ / P-2 1/2 460/3/ / P-3 3/4 110/1/ / P-4 3/4 460/3/ / P /1/ P /3/ P /3/ / /4 7.5 P /3/ / /4 7.5 Overall imensions

6 Model PG-gear drive elta s super duty mixers are designed for the most difficult mixg applications, especially for aggressive environments. Features Model No. HP Voltage ph. rpm Length L ia. S G A Sgle PG-0 1/3 110/1/ / ual W E M Permanently greased beargs Alumum/C.I./304SS Housg Variety of propellers available TEFC enclosure is standard Other enclosures are available upon request Variable speed drives are also available PG-1 1/2 110/1/ / /2 460/3/ / PG-3 3/4 110/1/ / PG-4 3/4 460/3/ / PG /1/ PG /3/ PG /3/ / /4 7.5 PG /3/ / /4 7.5 Overall imensions

7 Model PGF-flange mount elta s super duty mixers are designed for the most difficult mixg applications, especially for aggressive environments. Features Model No. HP Voltage ph. rpm Length L ia. S G A Sgle PGF-0 1/3 110/1/ / ual W E M Permanently greased beargs Alumum/C.I./304SS Housg Variety of propellers available TEFC enclosure is standard Other enclosures are available upon request Variable speed drives are also available PGF-1 1/2 110/1/ / PGF-2 1/2 460/3/ / PGF-3 3/4 110/1/ / PGF-4 3/4 460/3/ / PGF /1/ PGF /3/ PGF /3/ / PGF /3/ / Overall imensions I=5/8 Z=9/16 F=11

8 Wyecroft Rd. Oakville, ON L6L 6M8 Ph Fax istributor: