No. Date Items New Old Remarks
|
|
- Janel Franklin
- 5 years ago
- Views:
Transcription
1
2 Revised record SPC-S4L-37(/7) No. Date Items New Old Remarks Specification sheet form change S4L-ZT63SPH ENG ASSY 30A A Inclination kW{47.7PS} /3000rpm 33.1kW{45.0PS} /3000rpm Feb Rated Poweer with fan Change High Idle 350(+0,-30)rpm 300(+30,-10)rpm Fuel injection timing 14 BTDC 17 BTDC SOLENOID ASSY (Accessories) 30A A Engine model S4L-T63SPH S4L-ZT63SPH S4L-T63SPH ENG ASSY 30A A Dimensions (Width) Approx. 495mm Approx. 45mm Change Feb (Height) Approx. 65mm Approx. 640mm (Installation position of Air lnlet Front side Rear side turbocharger is modified.) Exhaust outlet Rear side Front side Apr Regulations 97/68/EC 003/44/EC Correction Change Engine assy drawing Apr (31A00-069) /-CHG 1 Change air inlet pipe S4L-T63SPH ENG ASSY 31A A Change(based on MEE Jan Dimensions(Length) Approx. 637mm Approx. 60mm request 008/Jan/18), add 10mm fan spacer to avoid Cooling fan 380mm, suction 360mm, suction the interference between Fan spacer 10mm No the fan and the alternator. Eng assy drawing (31A ) 1/-CHG 1 Dimensions(Length) Approx. 657mm Approx. 637mm Change fan spacer Apr Lubricating oil CF or CH-4 class CD class Change(based on MEE Fan spacer 31A (30mm) MM (10mm) request ), change fan spacer to 30mm from 10mm
3 1. Principal Particulars of Diesel Engine SPC-S4L-37(3/7) General Specification Standard All items, unless otherwise specified, are in accordance with JIS and maker's standards Model Mitsubishi S4L S4L-T63SPH 6 (MHI No. 31A /-CHG1) Regulations 97/68/EC Stage3A certified, Engine type " S4L-T" 97/68/EC as last amended by 004/6/EC Type 4 cycle water-cooled, vertical overhead valve, cylinder in line, swirl chamber type Number of cylinders 4 Bore Stroke 78mm 9mm Piston displacement liters Compression ratio : 1 Rotation Anti-Clockwise rotation as viewed from flywheel side Firing order Engine weight(dry) Approx. 174kg Dimensions(Length) Approx. 657mm (Width) Approx. 495mm (Height) Approx. 65mm Inclination(Continuous) 15 (Temporary) 30 (Max 30 min.) Fuel ASTM diesel fuel oil No.-D(JIS K04 gas oil specification No. or 3) Lubricating oil API classification service CF or CH-4 class Engine performance Spec.Rating Rating at delivery Breaking in around 50hr Breaking in around 0.5 hr Rated Power(Without fan) 36.8kW{50.0PS}/3000rpm 35.0kW{47.5PS}/3000rpm 5 (With fan, for ref.) 34.kW{46.5PS}/3000rpm 3.4kW{44.1PS}/3000rpm Rating tolerance ±5% of nominal Fuel consumption(without fan) 73g/kW-h{01g/PS-h} 300g/kW-h{1g/PS-h} Tolerance ±5% ±5% Low Idle 1000±5rpm High Idle 350(+0,-30)rpm Rating conditions(without fan) ISO 3046 Total barometric pressure:100kpa Air temperature :98K Relative humidity :30% Oil consumption Within.7g/kW-h{.0g/PS-h} Fuel injection timing 14 BTDC Mean effective pressure 0.83MPa{8.5kgf/cm }at Rating Piston speed 9. m/s at 3000rpm
4 Fuel system SPC-S4L-37(4/7) Fuel injection pump Fuel injection nozzle Governor Fuel filter BOSCH type Throttle type Mechanical centrifugal type Filtering paper type Min. required fuel feeding head 100mm Max.static head of leak pipe 00mmHg (return) Lubricating system Lubricating system Lubricating oil filter Oil pressure Oil capacity Oil dipstick Oil pressure switch Forced circulation by trochoid pump Filtering paper type, full flow 0.9MPa~0.39MPa{3~4kgf/cm } at duty run 0.098MPa{1.0kgf/cm } min. at low idling Approx. 6.0 liters (Oil pan high level 5.5 liters,oil filter etc. Approx. 0.5 liters,high ~ Low Approx. 1.8 liters) Standard dipstick Yes Cooling system Cooling system Forced circulation of fresh water by centrifugal pump with thermostat Engine water capacity Approx..5 liters Cooling fan 380mm diameter,7 blades,suction Water pump pulley PCD 87mm Pulley ratio 1.33 ( Crankpulley : Water pump pulley = 116 : 87 ) Fan spacer 30mm Water temp. switch Yes Thermo. Unit No Thermostat Open at 76.5deg.C - full open at 90deg.C Electrical system Alternator 1V - 50A Voltage regulator IC type (Built in alternator) Regulator set voltage 14.7 ±0.3 V Alternator pulley PCD 65mm Starting system Electric starting Starter motor 1V-.0kW Glow plug 10.5V,9.7A x 4 Engine shut off system Electric solenoid (ETR)
5 Intake and Exhaust system SPC-S4L-37(5/7) Intake manifold(cover) Exhaust manifold Induction Resistance Exhaust Back Pressure Turbocharger Engine front side of turbo charger Engine rear side of turbo charger Max 1.96kPa{0.mH0} Max 6.57kPa{0.67mH0} TD03-07G-4.8 <Remarks> Engine color Flywheel Flywheel housing Side gear PTO Black(MHI standard color) SAE#7-1/ SAE#5 Allowable torque 39.N-m{4.0kgf-m} total of front and rear, Clockwise rotation as viewed from flywheel side, Gear ratio 1:1 Gear speed(rpm)=8/8 Engine speed(rpm)
6 . Accessories ( Loose Supply ) SPC-S4L-37(6/7) 1 Parts Name Parts No. Q'ty Remarks 1 SWITCH,OIL PRESSURE 31A A4 SWITCH, THERMO MM Attached To Engine A4 3 SOLENOID ASSY 30A A4
7
8
9
10
11
12
No. Date Items New Old Remarks. Regulations,EU certified Stage 3A Stage 2 from 2007~
Revised record SPC-S3L-272(2/9) No. Date Items New Old Remarks Regulations,EU certified Stage 3A Stage 2 from 2007~ 1 Jun.30.2006 Specifications S3L2-Z263SP addition Spec.table 6/9pages addition 2 Oct.26.2006
More informationNo. Date Items New Old Remarks
Revised record SPC-S4S-396(2/6) No. Date Items New Old Remarks 200.9.24 MHI No. 32A00-03940 32A98-620 Model S4S-Z36SD S4S model name change Regulations 97/68/EC Stage3A certified engine family S4S-DG3A
More informationModel name change S4Q2-Y364KL S4Q2 Drawing change 32C C Regulations. EPA interim TIER4,
Revised record SPC-S4Q-342(2/7) No. Date Items New Old Remarks 1 Model name change S4Q2-Y364KL S4Q2 Drawing change 32C00-07780 32C98-55399 Regulations EPA interim TIER4, EPA interim TIER4, EU STAGE 3A
More informationENGINE SPECIFICATIONS
No. IS-08-012-0 ( 1/9 ) Rev. 0 ENGINE SPECIFICATIONS Engine Model Base Model : 4LE1(Stage 3A / Interim Tier 4) Model No. : BV-4LE1NYGV-01 Customer EXPORT Application Generator Drawing No. E3-1037-076-0
More informationENGINE SPECIFICATIONS
(1/5) ENGINE SPECIFICATIONS Engine Model Base Model 4BG1 Model No. 4BG1TCW Customer Export Standard Application General Industrial Drawing No. E4-1021-132-0 Emission Regulation EPA Tier-2, EC Stage-Ⅱ Revision
More informationENGINE SPECIFICATIONS
No. IS-08-025-0 ( 1/9 ) Rev. 0 ENGINE SPECIFICATIONS Engine Model Customer Application Drawing No. ( 3D Data Code ) Base Model : 4LE1T (Stage 3A / Interim Tier4) Model No. : BV-4LE1TYGV-01 EXPORT Generator
More informationENGINE SPECIFICATIONS
No. IS-08-134-0 ( 1/9 ) Rev. 0 ENGINE SPECIFICATIONS Engine Model Base Model : 4JJ1 (Intercooler turbo) Model No. : AI-4JJ1XYBW-01 Customer EXPORT Application General power Drawing No. E3-1040-017-1 (
More informationENGINE SPECIFICATIONS
No. IS-08-153-0 (1/9) Rev. ENGINE SPECIFICATIONS 0 Engine Model Base Model : AH-6UZ1X (Intercooler turbo) Model No. : AH-6UZ1XYBW-01 Customer EXPORT Application General power Drawing No. E5-1020-005-1
More informationENGINE SPECIFICATIONS
No. IS-08-137-0 ( 1/9 ) Rev. 0 ENGINE SPECIFICATIONS Engine Model Base Model : 4JJ1 (Turbocharger) Model No. : AJ-4JJ1TYBW-02 Customer EXPORT Application General power Drawing No. E3-1040-022-0 ( 3D Data
More informationENGINE SPECIFICATIONS
No. IS-08-175-0 (1/9) Rev. ENGINE SPECIFICATIONS 0 Engine Model Base Model : BH-6WG1X (Intercooler turbo) Model No. : BH-6WG1XYGV-01 Customer EXPORT Application Generator Drawing No. E9-1020-040-0 ( 3D
More informationENGINE SPECIFICATIONS
No. IS-08-161-0 (1/9) Rev. 0 ENGINE SPECIFICATIONS Engine Model Base Model : AH-4HK1X (Intercooler turbo) Model No. : AH-4HK1XYBW-01 Customer EXPORT Application General power Drawing No. E4-1033-016-1
More informationENGINE SPECIFICATIONS
No. IS-08-173-0 (1/9) Rev. ENGINE SPECIFICATIONS 0 Engine Model Base Model : BH-6HK1X (Intercooler turbo) Model No. : BH-6HK1XYGV-02 Customer EXPORT Application Generator Drawing No. E3-1032-033-0 ( 3D
More informationMITSUBISHI DIESEL ENGINE IFM NO. JN (1/6) TECHNICAL INFORMATION DATE Aug. 8, 2002
DIESEL ENGINE IFM NO. JN02411-011(1/6) TECHNICAL INFORMATION DATE Aug. 8, 2002 TITLE Specification Sheets of S6U-MPTK Engine (IMO Certified Engine) Specification Sheets of S6U-MPTK Engine that is satisfied
More informationTechnical data TAD740GE
Technical data TAD740GE General In-line four stroke diesel engine with direct injection Turbo charged and air to air intercooled Rotation direction, anti-clockwise viewed towards flywheel Number of cylinders
More informationENGINE SPECIFICATIONS
No. IS-08-171-0 (1/9) Rev. 0 ENGINE SPECIFICATIONS Engine Model Base Model : 4HK1X (Intercooler turbo) Model No. : BI-4HK1XYGV-02 Customer EXPORT Application Generator Drawing No. E4-1033-024-0 ( 3D Data
More informationENGINE SPECIFICATIONS
No. IS-08-9- ( /5 ) Rev. ENGINE SPECIFICATIONS Engine Model Engine series 3CE(Stage 3A / Interim Tier4) Model No. 3CE-BDZP4 Customer EXPORT Application General power Drawing No. C-024-003-0 Symbol Date
More informationD9 MG HE Base on water temp 38 C/100 F General
Base on water temp 38/0 General In-line four stroke diesel engine with direct injection. Rotation direction, anti-clockwise viewed towards flywheel. Turbocharged Number of cylinders 6 Displacement, total
More informationEngine only. Engine only. without fan kw hp with fan kw hp Power setting
General In-line four stroke diesel engine with direct injection. Rotation direction, anti-clockwise viewed towards flywheel. Turbocharged Number of cylinders 6 Displacement, total Firing order litre in
More informationG TNV88-BDSA. for Industry SPECIFICATIONS & DRAWINGS FOR MASS PRODUCTION
G3-29285-0021 3TNV88-BDSA for Industry SPECIFICATIONS & DRAWINGS FOR MASS PRODUCTION 3.Mar.2008 Contents G3-29285-0021 Drawing No. B3-29285-0010 E3-29005-0010 Z3-19822-0450 G3-29285-0021 Part No. Name
More informationTechnical data TAD1242GE. General
General In-line four stroke diesel engine with direct injection. Rotation direction, anti-clockwise viewed towards flywheel. Turbocharged Number of cylinders 6 Displacement, total litre 12,13 in 3 740,2
More informationTechnical data TAD1241GE. General
General In-line four stroke diesel engine with direct injection. Rotation direction, anti-clockwise viewed towards flywheel. Turbocharged Number of cylinders 6 Displacement, total litre 12,13 in 3 740,2
More information1104D-44TG2 1104D-44TG kwm 1500/1800 rpm. ElectropaK. Series. Basic technical data. Performance
1104D-44TG2 1104D-44TG3 56.6-69.0 kwm (Gross) @ 1500/1800 rpm ElectropaK 1100 Series Basic technical data Number of cylinders.....................................................4 Cylinder arrangement...................................
More information144 5, ,50 Compression ratio 16,5:1 Dry weight. Engine only, excluding cooling system GenPac. Engine only, excluding cooling system GenPac
General Inline four stroke diesel engine with direct injection. Rotation direction, anticlockwise viewed towards flywheel. Turbocharged Number of cylinders 6 Displacement, total Firing order in 3 16,12
More informationGeneral 4-stroke direct injected, turbocharged and aftercooled diesel engine
General 4-stroke direct injected, turbocharged and aftercooled diesel engine Number of cylinders No of valves Displacement, total Firing order Rotational direction, viewed from the front Bore Stroke Compression
More informationTechnical data TAD720GE (mech & EDC4) Prime & Standby Power
Prime & General In-le four stroke diesel enge with direct jection. Rotation direction, anti-clockwise viewed towards flywheel. Turbocharged Number of cylders 6 Displacement, total Firg order litre 3 7,15
More informationTechnical data TAD731GE
General In-le four stroke diesel enge with direct jection. Rotation direction, anti-clockwise viewed towards flywheel. Turbocharged Number of cylders 6 Displacement, total Firg order litre 3 7,15 436,
More informationTechnical data TAD1241GE Prime & Standby Power
General In-le four stroke diesel enge with direct jection. Rotation direction, anti-clockwise viewed towards flywheel. Turbocharged Number of cylders 6 Displacement, total litre 3 12,13 74,2 Firg order
More informationTechnical data TAD620VE
General In-line four stroke diesel engine with direct injection. Rotation direction, anti-clockwise viewed towards flywheel Number of cylinders 6 Displacement, total Firing order s in 3 5,7 348 1-5-3-6-2-4
More informationPU086 POWER UNIT (P-DRIVE)
PU086 P-DRIVE ISO 9001 REGISTERED PU086 POWER UNIT (P-DRIVE) Production tolerance : ±5% Continuous Rating Din 6270 A 107 kw (144PS) 2,200 rpm Intermittent rating Din 6270 B 118kW(160PS) / 2,200rpm Max.
More informationTechnical data TAD732GE With mounted radiator
General In-le four stroke diesel enge with direct jection. Rotation direction, anti-clockwise viewed towards flywheel. Turbocharged, charge air cooled (CAC) Number of cylders 6 Displacement, total Firg
More informationTechnical data TAD1242GE Prime & Standby Power
General Inle four stroke diesel enge with direct jection. Rotation direction, anticlockwise viewed towards flywheel. Turbocharged Number of cylders 6 Displacement, total litre 3 12,13 74,2 Firg order 153624
More informationTechnical data TAD532GE
General In-le four stroke diesel enge with direct jection. Rotation direction, anti-clockwise viewed towards flywheel. Turbocharged, charge air cooled (CAC) Number of cylders 4 Displacement, total Firg
More informationMitsubishi Diesel Engine Generators (Year 2008) Model: S12R-PTA (1250 kva, 3300V, 50Hz)
Mitsubishi Diesel Engine Generators (Year 2008) Model: S12R-PTA (1250 kva, 3300V, 50Hz) 1. Condition Engine starts within 40 seconds after Automatic Start ordered. Lubricating Oil must be Operating Condition:
More information1106A-70TAG4. Series kwm 1500 rpm ElectropaK. Basic technical data. General installation
1106A-70TAG4 196.3 kwm (Gross) @ 1500 rpm ElectropaK Basic technical data Number of cylinders.......................................................6 Cylinder arrangement................................................in-line
More informationIS-UZU. ISUZU DIESEL 4JG2PD-Ol ENGINE SPECIFICATION FOR GENESET. ISUZU MOTORS LIMITED frokyo JAPAN SPEC. NO DATE 98/7. Isuzu Motors Limited.
IS-UZU ISUZU DIESEL 4JG2PD-Ol ENGINE SPECIFICATION FOR GENESET IGM Isuzu Motors Limited. M.Yageta Manager International Sales Dept. Engine Sales Division Date: Date: /'/1r;./1'~ ISUZU MOTORS LIMITED frokyo
More informationEngine incl. cooling system and air filtration system Engine incl. cooling system, air filtration system, and frame. Standby Power
20110216 General Inline four stroke diesel engine with direct injection. Rotation direction, anticlockwise viewed towards flywheel. Turbocharged Number of cylinders 6 Displacement, total Firing order in
More informationTechnical data TWD1643GE
General Inline four stroke diesel engine with direct injection. Rotation direction, anticlockwise viewed towards flywheel. Turbocharged Number of cylinders 6 Displacement, total in 3 16,12 983,7 Firing
More informationTAD1661VE
Important This Technical Data Sheet and the corresponding Installation Instructions provide important information to ensure the installed engine will operate according to the design specification in the
More information7,15 436, Bore , ,12 Compression ratio. 17 Wet weight
General In-line four stroke diesel engine with direct injection. Rotation direction, anti-clockwise viewed towards flywheel. Turbocharged Number of cylinders 6 Displacement, total Firing order in 3 7,15
More informationTechnical Data 404D-22
Technical Data 404D-22 IOPU Basic technical data Number of cylinders..................................................... 4 Cylinder arrangement....................................verticle in line Cycle............................................................
More information7,15 436, Bore , ,12 Compression ratio. 18 Wet weight
General In-line four stroke diesel engine with direct injection. Rotation direction, anti-clockwise viewed towards flywheel. Turbocharged Number of cylinders 6 Displacement, total Firing order in 3 7,15
More informationGeneral In-line four stroke diesel engine with direct injection. Rotation direction, anti-clockwise viewed towards flywheel
Important This Technical Data Sheet and the corresponding Installation Instructions provide important information to ensure the installed engine will operate according to the design specification in the
More informationCertified for US EPA-Tier 2 / Constant Speed Standard Model [800kWe/60Hz]
MITSUBISHI S12A2-Y2PTAW-2 SPECIFICATION SHEET DIESEL ENGINES GENERAL ENGINE DATA Type 4-Cycle, Water Cooled Aspiration Turbo-Charged, Inter Cooler (Fresh water to Cooler) Cylinder Arragement 60 o V No.of
More informationGeneral In-line four stroke diesel engine with direct injection. Rotation direction, anti-clockwise viewed towards flywheel
Important This Technical Data Sheet and the corresponding Installation Instructions provide important information to ensure the installed engine will operate according to the design specification in the
More informationPerformance. Perkins Engines Company Limited. Perkins Engines Company Limited. Peterborough PE1 5FQ United Kingdom Tel: +44 (0)
105 kwm (Gross) @ 1500 rpm ElectropaK 1100 Series Basic technical data Number of cylinders.....................................................4 Cylinder arrangement...................................
More information38.1 Engine Main Parts Unit: mm (in.) Description Specification or Standard Repair Limit Service Limit
SPECIFICATIONS AND MAINTENANCE SERVICE SPECIFICATIONS AND 38 SPECIFICATIONS 1 AND MAINTENANCE 38.1 Engine Main Parts Description Specification or Standard Repair Limit Service Limit Cylinder compression
More information1012. The engine for construction equipment kw at min -1
1012. The engine for construction equipment. 41-123 kw at 1500-2500 min -1... Engines with integrated cooling system These are the characteristics of the 1012: Modern water-cooled 4- and 6-cylinder in-line
More information12,78 779, Bore , ,22 Compression ratio. 18,1:1 Wet weight. Engine incl. cooling system, air filtration system, and frame
General Inline four stroke diesel engine with direct injection. Rotation direction, anticlockwise viewed towards flywheel. Turbocharged Number of cylinders 6 Displacement, total Firing order in 3 12,78
More informationGeneral In-line four stroke diesel engine with direct injection. Rotation direction, anti-clockwise viewed towards flywheel
Important This Technical Data Sheet and the corresponding Installation Instructions provide important information to ensure the installed engine will operate according to the design specification in the
More informationGeneral In-line four stroke diesel engine with direct injection. Rotation direction, counterclockwise viewed towards flywheel
Important This Technical Data Sheet and the corresponding Installation Instructions provide important information to ensure the installed engine will operate according to the design specification in the
More informationIllustrated Parts List. 58A400 to 58A499 TURBO DIESEL
Illustrated Parts List Model Series 58A400 to 58A499 TURBO DIESEL FORM MS 5473 12/1/2003 REPLACES FORM MS 5473 7/1/2003 FILE IN SECT. 2 OF SERVICE MANUAL 58A400 to 58A499 TYPE NUMBERS 0205, 0209, 0210,
More informationVOLVO PENTA GENSET ENGINE TAD531GE
VOLVO PENTA GENSET ENGINE TAD531GE 1500 rpm, 102 kw (139 hp) 1800 rpm 111 kw (151 hp) The TAD531GE is a powerful, reliable and economical Generating Set Diesel Engine. Durability & low noise Designed for
More information1013. The engine for construction equipment.
1013. The engine for construction equipment.... 63-190 kw at 1500-2300 min -1 Engines with integrated cooling system These are the characteristics of the 1013: Modern water-cooled 4- and 6-cylinder in-line
More informationMITSUBISHI S16R-C2MPTK
MITSUBISHI S16R-C2MPTK Click on the headlines below to get redirected to the respective sections in this document. GA drawing Technical data Elastic drawing Measure of overhaul Connection details Power
More informationThe engine company. The Engine for Construction Equipment ,9 kw hp at rpm
The engine company. The Engine for Construction Equipment. 23 74,9 kw 31 100 hp at 1600 2800 rpm Engine description Type of cooling: Crankcase: Crankcase breather: Cylinder head: Valve arrangement/ Timing:
More informationTechnical Data Series 1206E-E70TTA. Industrial Open Power Unit (IOPU) Performance. Basic technical data
Technical Data 1200 Series 1206E-E70TTA Industrial Open Power Unit (IOPU) 151 kw @ Basic technical data Number of cylinders.....................................................6 Cylinder arrangement...................................
More informationTECHNICAL SPECIFICATIONS FOR 380/410 KVA, 6 CYLINDER DIESEL GENERATOR SET PACKAGED BY SCOPE OF SUPPLY FOR DIESEL GENERATING SET PACKAGE
MAHINDRA TECHNICAL SPECIFICATIONS FOR 380/410 KVA, 6 CYLINDER DIESEL GENERATOR SET PACKAGED BY ENGINE: Mahindra Scania Internal Combustion (IC) Diesel Engine conforming to BS5514 Standards CPCB Emission
More informationDEUTZ Engine Documentation Genset Manual. BF4M2012C (D2OC74,9) - 50 Hz 1/5 DEUTZ AG
1/5 DEUTZ AG Technical data General engine data Engine Type BF4M2012C EKZ 11372 Speed 1500 min -1 Net frequency Exhaust emission standard 50 Hz Stage II Specific engine data Aspiration No of cylinders
More informationTechnical data TAD1353GE
General Inline four stroke diesel engine with direct injection. Rotation direction, anticlockwise viewed towards flywheel. Turbocharged Number of cylinders 6 Displacement, total Firing order in 3 12,78
More information4,76 290,7 Firing order Bore
General In-line four stroke diesel engine with direct injection. Rotation direction, anti-clockwise viewed towards flywheel. Turbocharged Number of cylinders 4 Displacement, total litre in 3 4,76 29,7
More informationTechnical data TAD1352GE
General Inline four stroke diesel engine with direct injection. Rotation direction, anticlockwise viewed towards flywheel. Turbocharged Number of cylinders 6 Displacement, total Firing order in 3 12,78
More informationTechnical data TAD1641GE
General Inle four stroke diesel enge with direct jection. Rotation direction, anticlockwise viewed towards flywheel. Turbocharged Number of cylders 6 Displacement, total Firg order litre 3 16,12 983,7
More informationTechnical data TAD1642GE
General Inle four stroke diesel enge with direct jection. Rotation direction, anticlockwise viewed towards flywheel. Turbocharged Number of cylders 6 Displacement, total Firg order litre 3 16,12 983,7
More informationTechnical data TAD941GE
General Inle four stroke diesel enge with direct jection. Rotation direction, anticlockwise viewed towards flywheel. Turbocharged Number of cylders 6 Displacement, total Firg order litre 3 9,36 571,4 153624
More informationTechnical Data. 400 Series 403D-15G. ElectropaK
Technical Data 400 Series 403D-15G ElectropaK Basic technical data Number of cylinders.................................................... 3 Cylinder arrangement.................................... Vertical
More informationTechnical Data Series 1204E-E44TA. Basic technical data. Performance
Technical Data 1200 Series 1204E-E44TA Industrial Open Power Unit (IOPU) 74.5 kw @ 2200 Basic technical data Number of cylinders.....................................................4 Cylinder arrangement...................................
More information1013ec. The engine for construction equipment.
1013ec. The engine for construction equipment. 92-235 kw at 2000-2300 rpm Engines with conventional cooling system. These are the characteristics of the 1013ec: Modern water-cooled 4- and 6-cylinder in-line
More informationTechnical Data Series 1206E-E70TTA. Basic technical data. Performance
Technical Data 1200 Series 1206E-E70TTA Industrial Open Power Unit (IOPU) 186 kw @ 2200 Basic technical data Number of cylinders.....................................................6 Cylinder arrangement...................................
More information1106A-70TG1. Series kwm 1500rpm ElectropaK. Basic technical data
1106A-70TG1 135.8 kwm (Gross) @ 1500rpm ElectropaK Basic technical data Number of cylinders....................................................................6 Cylinder arrangement............................................................
More informationGeneral 4-stroke direct injected, turbocharged and aftercooled diesel engine
General 4-stroke direct injected, turbocharged and aftercooled diesel engine Number of cylinders No of valves Displacement, total Firing order Rotational direction, viewed from the front Bore Stroke Compression
More information6 Displacement, total Compression ratio 16,5:1 Dry weight. Engine only, excluding cooling system GenPac
General Inle four stroke diesel enge with direct jection. Rotation direction, anticlockwise viewed towards flywheel. Turbocharged Number of cylders 6 Displacement, total Firg order litre 3 16.12 983.7
More information1106A-70TAG2. Series kwm 1800rpm ElectropaK. Basic technical data
1106A-70TAG2 163.8 kwm (Gross) @ 1800rpm ElectropaK Basic technical data Number of cylinders....................................................................6 Cylinder arrangement...........................................................in-line
More informationS16U-TA MITSUBISHI DIESEL ENGINES
S16U-TA GENERAL ENGINE DATA Type... 4-Cycle, Water Cooled Aspiration... Turbo-Carged, After Cooler (Jacket Water to Cooler) Cylinder Arrangement... 60 V No. of Cylinders... 16 Bore mm (in.)... 240 (9.45)
More information@Perkins. Technical Data. 1106D-E66TAG3 159, rev/min. 1100D Series. ElectropaK
Technical Data 1100D Series ElectropaK Basic technical data Number of cylinders..................................................... 6 Cylinder arrangement............................................ In-Line
More information(1) Prime power: The rating is available for an unlimited of annual operating hours in variable load applications, in accordance with
SHENZHEN FUDIANKANG ENERGY CO., LTD GUANGZHOU SANQ DIESEL GENERATOR SET CO., LTD Tel:86-13729889887 Fax:86-20-84550026 Web: Email: info@fdkenergy.com DATA SHEET DIESEL GENERATOR 605KW MODEL#FDK-D605/H1
More informationTechnical data TWD1240VE
General In-le four stroke diesel enge with direct jection. Rotation direction, anti-clockwise viewed towards flywheel Number of cylders 6 Displacement, total Firg order s 3 12,13 740 1-5-3-6-2-4 Bore Stroke
More information1106C-70TA. Series. Industrial Open Power Unit. Tier rpm. Basic technical data. Ratings
1106C-70TA Tier 2 162 kw @ 2200 rpm Industrial Open Power Unit 1100 Series Basic technical data Number of cylinders...........................................................6 Cylinder arrangement....................................................
More information@Perkins. Technical Data. 192, rev/min. ElectropaK
Technical Data 1100D Series ElectropaK @Perkins 1106D-E66TAG4 192,3 kwm @ 1800 rev/min Basic technical data Number of cylinders..................................................... 6 Cylinder arrangement............................................
More information4 Stroke Diesel. Oil type SAE 15 W40/E 3
MARCH 2006 TECHNICAL DATA 2.33 GENERAL SPECIFICATIONS Cycle Air supply Injection 4 Stroke Diesel naturally aspirated direct Number of cylinders 4 in line 6 in line Bore mm 104 Stroke mm 132 Total displacement
More informationTechnical data TAD1641VE
General Inle four stroke diesel enge with direct jection. Rotation direction, anticlockwise viewed towards flywheel Number of cylders 6 Displacement, total Firg order s 3 16,12 984 153624 Bore Stroke 144
More informationTechnical File and Copy of United States Environmental Protection Agency (EPA) Statement of Compliance
Technical File and Copy of United States Environmental Protection Agency (EPA) Statement of Compliance MARINE DIESEL ENGINES D4.2L IDI (Mercury MerCruiser D4.2L Model) IMPORTANT: To comply with regulations
More information1106A-70TAG3. Series kwm 1500rpm ElectropaK. Basic technical data
1106A-70TAG3 180.2 kwm (Gross) @ 1500rpm ElectropaK Basic technical data Number of cylinders....................................................................6 Cylinder arrangement...........................................................in-line
More informationPARTS CATALOG 0CD10-M95700EN
PARTS CATALOG 0CD0-M95700EN Last update Apr., 0 Directions for the Parts Catalog..This Parts Catalog shows both standard and optional parts..parts may change without prior notice..the following is an
More information1000 Series 6TWGM Marine Auxiliary Engine kw (195.7 hp) gross prime 1800 rpm
Based on Perkins universally acclaimed 1000 Series and renowned throughout the power generation industry for its superior performance and reliability. The Perkins 6TWGM is a turbocharged, charge air-cooled,
More informationAftertreatmnet System DOC DOC + SCR
DOOSAN INFRACORE INDUSTRIAL ENGINE D34 Intermittent rating kw(hp) / rpm 54 (74) / 2400 330 (33.7) / 1400 63 (85) / 2400 325 (33.1) / 1600 69 (92) / 2400 350 (35.7) / 1600 75 (100) / 2400 375 (38.2) / 1600
More informationPPU Diesel Power 50/60Hz Containerized Generator Set
50Hz at 0.8 Power Factor 380-400V 3-Phase Rated Voltage 60Hz at 0.8 Power Factor 480V 3-Phase Rated Voltage PRIME STANDBY 800kW/1,000kVA 880kW/1,100kVA GENERATOR SET PERFORMANCE Application A factory designed
More informationTechnical File and Copy of United States Environmental Protection Agency (EPA) Statement of Compliance
Technical File and Copy of United States Environmental Protection Agency (EPA) Statement of Compliance MARINE DIESEL ENGINES D4.2L 230 (4.2 MS 230 and 4.2 MI 230 Model) IMPORTANT: To comply with regulations
More informationEngine Performance 1500 RPM
CUMMINS ENGINE COMPANY, INC Columbus, Indiana 471 ENGINE PERFORMANCE CURVE Basic Engine Model: QST-G3 Engine Critical Parts List: CPL: 284 Curve Number: FR-188 Date: 23Dec3 Q 1 Displacement :.48 liter
More information7,15 436, Bore , ,12 Compression ratio 18 Wet weight. Engine incl. cooling system and air filtration system
Document No General In-line four stroke diesel engine with direct injection. Rotation direction, anti-clockwise viewed towards flywheel. Turbocharged Number of cylinders 6 Displacement, total Firing order
More informationSERVICING SPECIFICATIONS (1) ENGINE BODY
SERVICING SPECIFICATIONS (1) ENGINE BODY Lubricating oil capacity Oil pan depth 110 mm (4.33 in.) 5.7 L 1.5 U.S.gals (1/14) Oil pan depth 125 mm (4.92 in.) 5.1 L 1.3 U.S.gals Oil pan depth 130 mm (5.12
More informationWORKSHOP MANUAL DIESEL ENGINE SM-E2B SERIES
WORKSHOP MANUAL SM-E2B SERIES TO THE READER This Workshop Manual has been prepared to provide servicing personnel with information on the mechanism, service and maintenance of SM-E2B series. It is divided
More information@Perkins. Technical Data. 400 Series 403D-11G. ElectropaK
Technical Data @Perkins 400 Series 403D-11G ElectropaK Basic technical data Number of cylinders.................................................... 3 Cylinder arrangement....................................
More informationMODEL NUMBER AND IDENTIFICATION. Pag. 5 CHARACTERISTICS CHARACTERISTIC POWER, TORQUE AND SPECIFIC CONSUMPTION CURVES
MODEL NUMBER AND IDENTIFICATION CHARACTERISTICS CHARACTERISTIC POWER, TORQUE AND SPECIFIC CONSUMPTION CURVES MAINTENANCE - RECOMMENDED OIL TYPE - REFILLING POSSIBLE CAUSES AND TROUBLE SHOOTING OVERALL
More informationPower where you need it...when you need it!!!
Important This Technical Data Sheet and the corresponding Installation Instructions provide important information to ensure the installed engine will operate according to the design specification in the
More informationTechnical Data Series 1206E-E70TTA. Basic technical data. Performance
Technical Data 1200 Series 1206E-E70TTA Electropak 150 kwe @ 1800 rpm Basic technical data Number of cylinders.....................................................6 Cylinder arrangement...................................
More informationTechnical Sales Document
1/23 Reference conditions 6 Intake air temperature 25 C 7 Chargeair coolant temperature C 8 Barometric pressure 1000 mbar 9 Site altitude above sea level 100 m 2/23 0. Datarelevant engine design configuration
More informationPower where you need it...when you need it!!!
Important This Technical Data Sheet and the corresponding Installation Instructions provide important information to ensure the installed engine will operate according to the design specification in the
More informationJCB DIESEL GENERATOR TECHNICAL SPECIFICATIONS
JCB DIESEL GENERATOR TECHNICAL SPECIFICATIONS G2000QX G2000X Powered by MITSUBISHI ELECTRICAL PRIME STAND BY Output Rating kva 1892 2035 kw 1514 1628 Frequency Hz 50 Rated Speed RPM 1500 Standard Voltage
More informationTechnical Data. ElectropaK
Technical Data 1100D Series ElectropaK Basic technical data Number of cylinders..................................................... 4 Cylinder arrangement.............................................
More informationGeneral 4-stroke direct injected, turbocharged and aftercooled diesel engine
D11B-A (R-51IB) 5 General 4-stroke direct injected, turbocharged and aftercooled diesel engine Number of cylinders No of valves Displacement, total Firing order Rotational direction, viewed from the front
More information