HEADER PARTS Harvest. PHONE: FAX:

Transcription

1 HEADER PARTS Catalogue 2017 Harvest PHONE: FAX: harvestaire.com.au Since 1980

2 Harvestaire is a Western Australian owned operation marketing products across Australia. harvestaire.com.au Phone: Fax: sales@harvestaire.com.au After Hours: Dean Brooks - Mobile:

3 Harvestaire is Proudly Australian Owned and Operated Contents Actuators - Electric Linear Air Reel Parts... 8 Auger Extensions Bats - Header Reel Bats Belting - Draper Front & Pickup Belts & Rollers Belts - V Belt - Heavy Duty Brackets GPS & 2 Way & Touch Screens Canola Vertical Knife Canola - Sieves Chain - Roller Concaves - Helical Concaves - Conventional & Axial Flow Crop-lifters Drum Bars Feeder Chains & Sprockets Gorden Rotor Bars Grain Elevator Chains & Sprockets Grain Tank Extensions - Big Top... 9 Hay Tynes Height Gauge - Lokken Hydraulic Multi Coupler Idler Pulleys Knife Drive Box - (SCH) Knife Guard Lifter Kits Knife Guards Knife Sections & Knifeheads & Hardware Knives Lentil Lifter Lupin & Canola Breakers... 9 Moisture Test Weight & Temperature Meters - Grain Hay Cotton Coffee Plastic Extension Finger Posifeed Rollers PTO Shafts & Yokes Retractable Fingers Rotor Bars Rotor Blade Kits (Elephant Ears) Rubber Seals & Curtains & Auger Spouts Sieves - Gorden Air Jet Sieves - Top & Bottom Pre Cleaners Tyne Reels & Parts (Hart Carter & Universal & Macdon) Unload Auger Clutch System...12 Wear Bars Replacement Parts Augers Feeder House Parts Rotor Parts Engine Parts Hydraulic Parts Steering Parts General Parts Wind Fan Parts Transmission and Final Drive Parts Case-IH John Deere New Holland Massey Ferguson/Agco/Allis Macdon Draper Platforms harvestaire.com.au 3

4 Tyne Reels for all makes We are an Australian distributor for Hart Carter and carry a large stock of Reels and Parts. Hart Carter Reels are original equipment on John Deere, Case-IH, New Holland, Honey Bee, Agco and Massey Ferguson. Order No. Description Model Application Price Agco/Allis HATR581 Reel 30ft Agco/Allis all 30ft Fronts except Draper 6 Bar Reel $7500 Case-ih HATR561 Reel 25ft Case-IH ft 6 Bar Reel $7000 HATR581 Reel 30ft Case-IH ft 6 Bar Reel $7750 HATR560 Reel 25ft Case-IH ft 6 Bar Reel $7000 HATR580 Reel 30ft Case-IH ft 6 Bar Reel $7600 Honeybee (or New Holland belt front) hatr582 Reel 30ft Honeybee 30ft 6 Bar Reel $7500 HATR034 Reels 36ft (HATR034 + HATR534) Honeybee 36ft Split Reels 6 Bar Reel $8800 HATR546 Reels 42ft (HATR546 + HATR046) Honeybee 42ft Split Reels 6 Bar Reel $9250 HATR552 Reels 45ft (HATR552 + HATR102) Honeybee 45ft Split Reels 6 Bar Reel $10000 John Deere HATR562 Reel 25ft John Deere ft 6 Bar Reel $7000 HATR580 Reel 30ft John Deere 230 and ft 6 Bar Reel $7600 HATR056 Reel 24ft John Deere 224 & ft 6 Bar Reel $7000 HATR582 Reel 30ft 8 Centre Barrel JD630 Rigid 30ft 6 Bar Reel $7300 HATR035 Reel 30ft 10 Centre Barrel JD630 Draper 30ft 6 Bar Reel $8750 HATR023 Reel 35ft One Piece 10 Centre Barrel JD935D Draper 35ft 6 Bar Reel $9250 HATR076 Reel 36ft One Piece 10 Centre Barrel JD936D Draper 36ft 6 Bar Reel $11250 Macdon (or Case-IH belt front) hatr581 Reel 30ft Macdon 30ft Swather or Harvester 6 Bar Reel $7750 Midwest Reels and parts are available for MidWest Platforms fitted with Hart Carter Reels (All models prior to 2010) New Holland HATR580 Reel 30ft New Holland Front 30ft 6 Bar Reel $7600 Reels include Reel Arm Brackets but not For/Aft Hydraulic Cylinders, Hoses or Hydraulic Motor Drives, Chains or Sprockets. 4 Prices exclude GST

5 Reel Tynes 112mm 4 1 /2 152mm 6 Level and prior Level onwards RT-551 RT-804 RT-013 RT-423 RT-525 RT-183 RT-409 RT-630 UHC-211 RT-767 RT-985 RT-139 HC RT-434 RT-987 Order No. Description and Model Application Price RT-551 John Deere, New Holland, Honeybee, Agco/Allis & Case-IH. suits almost all Reels sold on these machines $4.50 with Pipe Bats (Hart Carter Reels) 4 1 / 2, 112mm spacing RT-804 John Deere Rigid and Draper, New Holland, Honeybee, Agco/Allis & Case-IH. Original Hart Carter - USA $5.50 RT-804A Latest model Hart Carter Reels 6, 152mm spacing Level 2 Reels 1999 onwards Australian Production $4.50 RT-423 John Deere 630D 635D 640D 630FD 635FD 640FD 645FD Draper Fronts $11.40 ea with latest reel arm bearings Original Part: KXE10423 RT-013 Auxillary Tyne. Fitted to left and right ends of Hart Carter Reels $12 RT-525 John Deere, New Holland, Honeybee, Agco/Allis & Case-IH. Suits almost all reels sold Extra Strength $7 on these machines with Pipe Bats (Hart Carter Reels) 4½, 112mm spacing Version with Steel Strap RT-183 Case-International 810 or 1010 or other makes & models with wooden bats replaces steel spring tynes $4 (Comes with bolts and nuts for attachment) RT-409 Case-IH with LOVE Reel, Horwood Bagshaw with LOVE Reel $7 RT-630 Honeybee and Agco fitted with Universal Harvester (U2) Reel $4 UHC-211 Wire Tyne 8 Honeybee fitted with Universal Harvester (U2) Reel $4.50 RT-767 Early Agco/Allis R50 R60 R70 C-IH 1020, some JD900 Series, NH971 early $5 RT-985 Macdon MC Used on Macdon Reels prior 2001, Case-IH Belt Fronts prior / $3.30 RT-139 Macdon CXM Used on Macdon Reels 2001 onwards excluding D60 model $6 HC Case-IH 1010 reels with wooden bats Steel Tyne $4 HC Tyne Clip suits HC Steel Tyne on wooden bat $0.60 RT-434 Macdon , Case-IH suits 42mm Diameter Pipe on Case-IH D60 and New Holland 83C Draper Fronts $8 RT-987 Macdon , Case-IH suits 42mm Diameter Pipe on Case-IH D60 and New Holland 83C Draper Fronts $10 Heavy Duty Version on Case-IH and New Holland Draper Fronts HPNH 1149 New Holland 806 Finger Reels Steel 2 Prong Tyne $6 HPNH 1106 New Holland All European Pick up Reels, 1500 Series, 705 & 805 Fronts, Steel 2 Prong Tyne $7 HC Paddle Tyne Level 1 Hart Carter Reel ( ). For light crops use approximately 60 on a 30ft front $8 HC Paddle Tyne Level 2 Hart Carter Reel (1999 onwards). For light crops - replaces 20% of Standard Tynes $ Prices exclude GST 5

6 Hart Carter Tyne Bars Agco HC ft tyne bar (no tynes or end cranks) $ mm Level 1 (Prior 1999) /2 Tyne Spacing HC ft tyne bar (no tynes) $ mm long Level End Cranks Included 6 Tyne Spacing Case-IH HC ft Tyne Bar (no tynes or end cranks) $300 Suits Fronts 8837mm long, Level 1 (Prior 1999) /2 Tyne Spacing HC ft Tyne Bar (no tynes) $330 Suits Fronts 8864mm long, Level End Cranks Included 6 Tyne Spacing HC Wooden Bat with Steel Tynes mm $200 Suits early models - late 80 s, early 90 s mm Honeybee HC ft Tyne Bar (no tynes or end cranks) $ mm long, Level 1 (Prior 1999) /2 Tyne Spacing HC ft Tyne Bar (no tynes) $ mm long Level End Cranks Included 6 Tyne Spacing HC ft Tyne Bar (no tynes or end cranks) $250 Suits 36ft left or right reel Level 1(Prior 1999) 41/2 Tyne Spacing HC481902L 18ft Tyne Bar (no tynes) - Left $285 Suits 36ft Level 2 End Cranks included 6 Tyne Spacing HC481902R 18ft Tyne Bar (no tynes) - Right $285 Suits 36ft Level 2, End Cranks included 6 Tyne Spacing HBTB21L 21ft Tyne Bar (no tynes) - Left $300 Suits 42ft Level 2 End Cranks included 6 Tyne Spacing HBTB21R 21ft Tyne Bar (no tynes) - Right $300 Suits 42ft Level 2 End Cranks included 6 Tyne Spacing HBTB22L 22ft Tyne Bar (no tynes) - Left $310 Suits 45ft Level 2 End Cranks included 6 Tyne Spacing HBTB22R 22ft tyne bar (no tynes) - Right $310 Suits 45ft Level 2 End Cranks included 6 Tyne Spacing John Deere HC ft Tyne Bar (no tynes or end cranks) $300 Suits 200 Series fronts & some early 900 Series fronts 8764mm long, Level 1 (Prior 1999) /2 Tyne Spacing HC ft Tyne Bar (no tynes) $330 Suits 900 Series fronts 8790mm long, Level 2 (1999 onwards) 580 End Cranks Included 6 Tyne Spacing HC ft Tyne Bar (no tynes) $330 Suits 630 Fronts 8952mm long Level End Cranks Included 6 Tyne Spacing JDTB35 35ft Tyne Bar (no tynes) - Single Piece $475 Suits John Deere 635 Draper End Cranks Included 6 Tyne Spacing HC ft Tyne Bar (no tynes) - Single Piece $475 Suits John Deere 936 Draper End Cranks Included 6 Tyne Spacing JDTB40L 20ft Tyne Bar (no tynes) - Left $300 Suits John Deere 640D 40ft Level 2 End Cranks included 6 Tyne Spacing JDTB40R 20ft Tyne Bar (no tynes) - Right $300 Suits John Deere 640D 40ft Level 2 End Cranks included 6 Tyne Spacing Midwest MWTB20L 20ft Tyne Bar (no tynes) - Left $300 Suits Midwest 40ft with Hart Carter Reel End Cranks included 6 Tyne Spacing MWTB20R 20ft Tyne Bar (no tynes) - Right $300 Suits Midwest 40ft with Hart Carter Reel End Cranks included 6 Tyne Spacing MWTB21L 21ft Tyne Bar (no tynes) - Left $300 Suits Midwest 42ft with Hart Carter Reel End Cranks included 6 Tyne Spacing MWTB21R 21ft Tyne Bar (no tynes) - Right $300 Suits Midwest 42ft with Hart Carter Reel End Cranks included 6 Tyne Spacing MWTB22L 22ft Tyne Bar (no tynes) - Left $310 Suits Midwest 45ft with Hart Carter Reel End Cranks included 6 Tyne Spacing MWTB22R 22ft Tyne Bar (no tynes) - Right $310 Suits Midwest 45ft with Hart Carter Reel End Cranks included 6 Tyne Spacing MWTB25L 25ft Tyne Bar (no tynes) - Left $320 Suits Midwest 50ft with Hart Carter Reel End Cranks included 6 Tyne Spacing MWTB25R 25ft Tyne Bar (no tynes) - Right $320 Suits Midwest 50ft with Hart Carter Reel End Cranks included 6 Tyne Spacing New Holland HC ft Tyne Bar (no tynes) $ mm long Level 1 (Prior 1999) 080 Suits 971 Front 41/2 Tyne Spacing HC ft Tyne Bar (no tynes) $ mm long Level Suits Fronts End Cranks included 6 Tyne Spacing Centre Tubes HC ft Centre Tube $1850 including welded flanges or lugs (detail model being fitted to) CTERW30 30ft Centre Tube No Flanges $ Diameter HC ft Centre Tube including welded lugs $3350 Suits JD 36ft Draper Front (10 diameter) Long length tyne bars can be expensive to freight. We can supply each bar in 2 pieces to reduce the time and cost of freight. Additional cost is $60 per bar. Each 2 piece bar is provided with a solid centre clamp. No welding or drilling is required - just 2 nuts to tighten. 6 Prices exclude GST

7 Hart Carter Tyne Reel Parts HC Reel Arm Bearing Half $3 Suits most reels since approx 1990 (including all JD 909 Series Draper above S/N ) HC Reel Arm Bearing Half $8 Suits reel John Deere Draper Front 900 Series early up to S/N HC28803 Reel Arm Bearing Half $7.50 Suits reels on John Deere Draper 630D 635D 640D 645D Latest Design Original Part: AXE28803 NEW HC Reel Arm Bearing Half $2.50 C-IH 1010 with wood bats and JD 36ft Draper Front Ends of reel only HC Reel Arm Bearing Top $2.40 Cap C-IH 1010 with wood bats HC Reel Arm Bearing Base $2.80 C-IH 1010 with wood bats HC U Bolt $3.70 Suits C-IH 1010 with wood bats HC End Shield Bearing male thread $5 All Level 1 and Level 2 HC End Shield Bearing female thread $4 All Level 1 and Level 2 HC Super oilite bearing $13 HC Eccentric control ring - 6 hole $200 Suits all Level 1 and Level 2 6 Bar Reels HC Eccentric control ring 5 hole $220 Suits Level 1 5 Bar Reels HC Ball bearing roller $40 Suits all Level 1 and Level 2 since 1990 HC Ball bearing roller early type $45 (No threaded stud) HC Eccentric end shield 6 bar models $400 Suits all Level 1 and Level 2 HC Reel Arm $18 Suit 10 Barrell Later JD 30 & 36Ft type Original Part: H HC Reel Arm early type $27 HC Reel Arm early type $30 HC Bearing strap suits HC bearing half $5 HC Driving end shaft $480 Level 1 8 Barrel (detail model being fitted to) HC Idling end shaft $220 Level 1 8 Barrel (fits all models) HC Driving end shaft $440 Level 2 8 Barrel (detail model being fitted to) HC Idling end shaft $300 Level 2 8 Barrel (fits models since 1999) HC Right hand crank arm for bar $65 Level 1 prior 1999 HC Left hand crank arm for tyne bar $65 Level 1 prior 1999 HC Driving end shaft $625 JD 36ft Draper Platform early up to S/N (AH164074) 10 Barrel Reinforcing dish is on outside HC Driving end shaft $625 JD 36ft Draper Platform current above S/N (AH206803) 10 Barrel Reinforcing dish is on inside HC Idler end shaft $525 JD 36ft Draper Platform early up to S/N (AH164075) 10 Barrel Reinforcing dish is on outside HC Idler end shaft $525 JD 36ft Draper Platform above S/N (AH AH215184) 10 Barrel Reinforcing dish is on inside HC Socket Head Shoulder Screw and Nut $17 HC Eccentric end shield 5 bar models $450 HC Left hand end bracket $250 (detail model being fitted to) HC Reel Arm $14 Suits Level 1 and Level 2 8 Barrell HC Reel Arm $26 Suits 10 Barrell Early JD 36Ft type Original Part: H HC Right hand end bracket $250 (detail model being fitted to) HC Segment Eccentric end shield $55 (some reels JD and New Holland) Prices exclude GST 7

8 Universal Harvester (U2) Reel Parts (Fitted to some Honeybee Draper Fronts) UHC225 Tip Plate $6 UHC235 Ball Bearing $14 UHC241B Ball Bearing Holder Assembly $35 UHC255 Fixed Control Arm for 42 Diameter Reel $22 (13 5 /8 ) UHC256 Regular Control Arm for 42 Diameter Reel $20 (12 13/32 ) UHC265 5 Bat Shield Section for 42 Diameter Reel $45 UHC2413 Ball Bearing Holder Assembly $24 Original Part: NH UHC266 6 Bat Shield Section for 42 Diameter Reel $45 UHC Control Plate Assembly/Tube Inserts (2) $225 UHC245 5 Bat control ring including Bearings $290 UHC247 6 Bat control ring including Bearings $330 UHC-290 Control Plate Roller $45 (No threaded stud) Macdon Reel Parts MD Reel Arm Bearing $6.50 Suits CIH Belt Front 2052 Macdon 973 some 972 Case-IH A1 MD48083 Reel Arm Bearing $10 Suits CIH Belt Front Macdon MD Reel Arm Bearing $8 Suits D60 D65 Macdon Reel & Case-IH MD End Tyne Bush (goes with MD137539) $2 Use 3 per bat suits D60 MD50185 Bearing End of cam arm $10 Model 2100 Tyne Reel (973) MD50184 Bearing Cam Ring $20 Model 2100 Tyne Reel (973) MD Flange Finger Tube $30 Model 2100 Tyne Reel below S/N Mid West Reel Parts MWECR Eccentric Control Ring $85 Midwest Fronts 2009 on Mid West Fronts used Hart Carter Reels until See pages 5,6 and 7 for parts for these. New Holland Reel Parts HPNH2294 Reel Arm Bearings $4 Suits Original Part: A full range of spare parts are available for Air Reels. Please ring for details. 8 Prices exclude GST

9 Grain Tank Extensions More Time Harvesting... Less Time Emptying Add up to 3 tonne (of wheat) to your capacity Folds Down Easily & Quickly Colour matched to your harvester Complete with wiring harness for bin level sensor and lights on some models Order Model Increased Price No. Application Capacity Case-IH BT24581B Case-IH Tonne $3500 BT29944 Case-IH Tonne $3100 BT26301 Case-IH (add to original equipment extension) 2.5 Tonne $1800 John Deere BT24545 John Deere CWS CTS CTSII 2.8 Tonne $3100 BT CWS 9660CWS 3.0 Tonne $3100 BT25583 Auger Cover Panel Use with Big Top $180 and on models prior to 2002 BT STS 9750STS 9660STS 9670STS 9760STS 9770STS 9860STS 9870STS 3.0 Tonne $3500 New Holland BT24152 TR Tonne $2900 Extra capacity is measured in relation to the original grain tank without Hungry Boards WARNING: Use of this product is at the owner s discretion. Increasing grain capacity may adversely affect centre of gravity, stability and controllability. Exceeding maximum combine weight loadings can risk structural integrity and drive line components. Harvestaire Pty Ltd does not assume any liabilities, or make any warranties regarding the performance or structure of the combine. See combine owner s/operator s manual for specific limitations, operating recommendations and safety information. Canola and Lupin Breakers These simple serrated brackets are attached to the cross auger on rigid to help break up bulky lupins or direct headed canola so the crop feeds better. Easily retracted out of the way for cereal crop harvesting. Order No. Description Price HPJDLB Canola and Lupin Breaker $12 ea (including bolts & nuts) Prices exclude GST 9

10 Moisture, Test Weight & Temperature Meters Grain and Seeds by Description Code Price ex GST WILE 65 Moisture Meter For whole grains and seeds. Clear and big LCD display. Moisture measurement range: grains and seeds 8-35%; oil seeds 5-25%. Contains 16 pre-programmed grains. Has memory for averaging results. Calibration adjustment for each grain type. WILE 651L Can be used with WILE 651L Temperature Probe. WILE65 WILE651L $695 $165 WILE 78 Grinding Moisture Meter The WILE 78 is the top of the range model that measures 21 grains and seeds. Wide moisture range 3-40%, dependent on the grain. Accuracy: +/- 0.5% under normal conditions. Specially coated teeth for longer life. Ergonomically designed cap. Backlit display. Strong aluminium construction. WILE78 $865 WILE 200 Grain Moisture Meter and Test Weight The Wile 200 is a fast and easy way to determine moisture and test weight. The meter has a patented integrated levelling system for the grain sample, USB port for future updates and LCD dislay with backlight. Wide moisture range of 6-45%, depending on the grain. Repeatability: +/- 0.3% with average samples. WILE200 $995 Hay Description Code Price ex GST WILE 26 Moisture Meter (includes Wile 251 Moisture Probe) Hay, silage and haylage moisture tester with text display. WILE 251 Measurement range: baled hay and silage 10-73%; loose hay and silage 13-85%. Maximum bale density 440kg/m 3 WILE26 $550 (includes Wile 251 Moisture Probe) Can be used with WILE 651L Temperature Probe. WILE 651L WILE651L $140 WILE 253 Dish Probe Dish probe for Wile 26 for measuring moisture of loose hay or silage in a bucket. WILE253 $155 WILE 651L External Temperature Probe - 100cm (40 ) Temperature probe, suitable for Wile 65 and Wile 26 moisture meters. Robust and light glassfibre shaft. WILE651L $140 Cotton Description Code Price ex GST WILE Cotton Moisture Meter For analysis of moisture in loose raw cotton. Includes six calibrations for different types of loose raw cotton which differ by quality and amount of debris. Moisture measurement range: %. Accuracy: +/- 2% moisture. Requires a 50cm probe WILECOTTON WILE251 $400 $ Prices exclude GST

11 Moisture, Test Weight & Temperature Meters Coffee Description Code Price ex GST WILE Coffee Moisture Tester For analysis of moisture in coffee and cocoa beans. Includes scales for arabica, robusta, roasted coffee and cocoa beans. Moisture measurement range: 1-38% depending on bean type. Accuracy: +/- 0.5% moisture. WILECOFFEE $690 Soil Description Code Price ex GST Soil Compaction Tester The Soil Compaction Tester will help you to determine if you have a compaction layer and, if so, the depth of the layer. The tester is supplied with two tips 1/2 diameter and 3/4 diameter. WILESOIL $400 Spare Parts and Accessories WILE 251 Bale Moisture Probe, 50cm (20 ) For Wile 25 and Wile 26 hay and silage moisture meters. Used also together with Wile Cotton moisture meter. Description Code Price ex GST WILE251 $120 WILE 241 Hectolitre Scale Hectolitre scale for grain WILE241 $60 Carrying Case Including a carry strap WILE2480 $35 Grain Measure Cup WILE2485 $10 CAP Complete For WILE Grain Measure Meters WILE2400 $50 Cap For WILE78 Grain Moisture Meter WILE2404 $160 Battery Cover Aluminium, model before 2007 WILE2430 $7 Battery Cover Model since 2007 (plastic frame) WILE2432 $7 Rubber Plug WILE 26 / 65. For external temperature probe connector. WILE2454 $9 Calibration Screwdriver WILE2487 $ Prices exclude GST 11

12 Unload Auger Clutch System NEW Empty your Unloading Auger without having to empty the Grain Tank. The system uses an electromagnetic clutch on the cross augers in the grain tank. It is operated by a foot switch in the cab. The kit comes with a full wiring harness, clutches and sprockets. Order No. Model Application Item Price LANJD1000K High Unloading Rate (HUR) models Unloading Auger Clutch System $ STS 9760STS 9860STS 9670STS 9770STS 9870STS S660 S670 LANJD2000K High Unloading Rate Unloading Auger CLutch System $4975 S680 S Prices exclude GST

13 Chaff Spreader Is your Unloading Auger too short? Auger Extensions The Extender is a simple add-on kit for Case-IH, Gleaner, John Deere, Massey Ferguson and New Holland Headers. Use the Extender for safe, fast unloading into chaser bins, field bins, trucks and semi trailers. CASE-IH CNH JD NH Order No. Model Application Item Price Case-Ih Axial Flow EXT-CIH-FT Extension inc Spout $1700 EXT-CNH-FT3R to Extension inc Spout (Red) $ ECNH216B Diameter Auger 36 Extension $3500 EXT-CNH-FT070R (2007 & 2008 Models Only) 36 Extension inc Spout (Red) $2250 John Deere EXT-JD-FT3 9650STS 9750STS 12¾ Diameter Auger 36 Extension inc Spout $ to 9610 inclusive CTS CTSII EJ STS 9660STS 9760STS 14 Diameter Auger 36 Extension $ STS 9770STS S670 S680 S690 EJ STS 9760STS 9860STS 17 Diameter Auger 48 Extention $ STS 9770STS 9870STS S670 S680 S690 High Unloading Rate Auger New Holland EXT-NHT-FT2 TR88 TR89 TR98 TR99 TX66 TX68 36 Extension inc Spout $2950 EXT-CNH-FT3 CR940 CR960 CR970 CR9060 CR9070 to Extension inc Spout (Black) $3250 CR9080 CR9090 CX840 CX860 CX880 CR7. 90 EXT-CNH-FT070B CR940 CR960 CR Models Only 36 Extension inc Spout (Black) $2250 ECNH216B CR8090 CR Diameter Auger 36 Extension $3500 Massey Ferguson EXT-AGCOMF-FT to Extension inc Spout $2500 EXT-EMGL4215-R Extension inc Spout (Red) $3250 Agco/Allis EXT-GL-FT212 Gleaner N+R Series 12 Diameter Auger 24 Extension $2650 EXT-GL-FT214 Gleaner N Series R62 R72 R76 R86 S77 14 Diameter Auger 24 Extension $1950 Spare Parts EXT-GSDSL Small Left Hand Spring for Grainsaver Door Case-IH, John Deere $12 EXT-GSDSR Small Right Hand Spring for Grainsaver Door Case-IH, John Deere $12 EXT-GSDSC Large Centre Spring for Grainsaver Door CNH Models $19 EXT-CIHSPOUT Spout Only suits EXT-CIH-FT3 EXT-NHT-FT2 $175 EXT-JDSPOUT Spout Only - suits EXT-JD-FT3 $175 EXT-CNH-FSSP Spout Only suits EXT-CNH-FT3 $595 NEW NEW Prices exclude GST 13

14 2 Finger Knife Guards KG31 KG32 KG33 KG42 KG44 KG208 GDJD1 KG209 KG210 KG1588 KG400 KG840 GDJD2 KG10616 KG10637 KG10701 KG10712 KG10717 Order No. Original Part No. Model Application Marks On Guard Price KG Agco/Allis BC225 $21 KG M1 Massey Ferguson Draper Front FG306 $30 KG R1 International 810 Front TPQ265 $22 KG33 - John Deere 200 & 900 series fronts, Prairie Mac Swather, Massey Ferguson, BC240 $18 New Holland Fronts (Replace ) Agware Swather KG New Holland Haybines & 971 Fronts, Case-IH 1010 Fronts & Swathers BU215A $ C1 & Mower Conditioners, Macdon Windrowers, Hesston Hay & Westward late model or 215 KG42C Guard for Centre of Double Knife Drive NH and CIH Mower Conditioner $34 KG Macdon Draper Fronts, Case-IH Draper Fronts $20 KG44CTR CentreKnife Guards suit Macdon Double Knife Drive $38 kg44he Knife Head End Guards $28 KG Claas (OEM ) $22 KG Versatile Swather BU290 $24 KG M1 Praire Mac & MF Swather, Westward early model 235RS $24 KG Macdon Swather or Belt Front (Stubby cutting edge) BU250 $25 gdjd1 H H John Deere Draper Fronts 2 Long Prongs, 1 Short Prong $26 gdjd2 H H John Deere Draper Fronts 1 Long Prong, 2 Short Prongs $26 KG New Holland Draper Front 740CF 840CD 880CF CaseIH $28 KG SCH Knife Guard Honeybee 2 Prong - $26 KG SCH Knife Guard 2 Prong suits centre where Double Knife Drives overlap - $70 KG SCH Knife Guard 2 Prong Open Top suits Knife Drive End - $60 KG SCH Knife Guard 3 Prong Head End - $60 KG SCH Knife Guard Honeybee 3 Prong - $85 SHIM-1 - Knife Guard Shim 1mm thick $1.40 SHIM-2 - Knife Guard Shim 2mm thick $1.50 SHIM-3 - Knife Guard Shim 3mm thick $1.60 PSFS10X8 - Wear Strip Suit Primary Sales Knife Guards $10.50 HPJD8526 H John Deere 600 Series Draper Fronts $26 HPJD9623 HXE19623 John Deere 600 Series Draper Fronts $72 HPJD8172 HXE18172 John Deere 600 Series Draper Fronts $66 NEW NEW NEW 14 Prices exclude GST

15 No Choke 4 in 1 Knife Guards Made in Germany for Long Life Innovative Knife Guards and Cutting Systems reduce crop losses. Reduce shatter loss without choking High quality forging. The Rolls Royce of Double Density KNIFE GUARDS. Reduces sideways travel of crop over 50% for less shatter and less wasted grain. NO CHOKE Knife Section projects past the short prong to cut through thick or tangled crops. Every second prong is short which gives you all the advantages of extra cutting edges without choking. NC4IN1CI Case-IH Macdon Honeybee $32 New Holland & Mid West Belt Fronts Case-IH 3050 Vari-Cut 3152 Rigid 3162 Flex New Holland 840CD New Holland C 73C Case-IH Marks on Guard: 7228 Uses 7 /16 Bolts NO CHOKE 4 in 1 Knife Guards For Medium to Heavy legumes eg. Lupins, Faba Beans, Chick Peas and all Wheat, Barley, Oats and Canola. High Quality German Steel High Quality Heat Treatment The whole guard is heat treated and case hardened to make it tough, then the cutting edges are heat treated separately to a very high hardness for long life. NC4IN1JD John Deere 200 & 900 Series Rigid Fronts $38 New Holland 806 Front Marks on Guard: 7222 Uses 3/₈ Bolts NC4IN1AC Agco/Allis, Rigid and Belt Fronts $46 Marks on Guard: 7222 Uses 3/₈ Bolts NC4IN1ENDGD End Guard suits Knife Drive Ends $45 Case-IH & Macdon Belt Fronts (3 required per Knife Drive End) Suits NH971 71C 73C Case-IH (1 required per Knife Drive End) Uses 7 /16 Bolts NCCTRHB Centre Guard suits Honeybee Case-IH $55 Macdon and Mid West Double Knife Drive (3 required per Front) Uses 7 /16 Bolts NC4IN1IH International 810 Fronts $38 Marks on Guard: 7226 Uses 3/₈ Bolts SHIMS 1mm suits New Holland C 73C No CHARGE Case-IH Front (2 per guard) NC4IN1CTR Centre Guard suits $90 New Holland C 73C, Case-IH (1 per Front) Uses 7 /16 Bolts Can be used with or without Harvestaire Plastic Extension Fingers Prices exclude GST 15

16 Knife Guard Lifter Kits For Legume Harvesting Lift the knife to the level of the belt. We strongly recommend that if you are using a Belt Front for harvesting legumes (lupins, beans, peas) that a Lifter Kit be fitted to raise the Knife level with the belt so that a lot of pods do not fall off the Knife because of the step-up that is along the front. We have kits to suit Macdon D60 D65 D75 also sold as Case-IH Honeybee and New Holland. All kits include spacer bars, bolts, nuts and adaptors to raise the knife drive. EXISTING Standard Belt Front Knife Guard Mount Modified belt Front Belt Front Example Spacer Step Belt Belt Knife now level with belt Order No. Model Application Price KGLM353 Knife Lifter Kit suits Macdon 35ft Belt Front D60 (C-IH2152) - Double Knife Drive $3150 KGLM36 Knife Lifter Kit suits Macdon 36ft Belt Front 960 (C-IH1040) - Single Knife Drive $1700 KGLM361 Knife Lifter Kit suits Macdon 36ft Belt Front 962 (C-IH1042) - Single Knife Drive $1850 Model 962 s will also need an original Macdon 960 Knifehead see below KGLM362 Knife Lifter Kit suits Macdon 36ft Belt Front 972 (C-IH1052) - Single Knife Drive $2000 KGLM363 Knife Lifter Kit suits Macdon 36ft Belt Front 973 (C-IH2052) - Single Knife Drive $2200 KGLM39 Knife Lifter Kit suits Macdon 39ft Belt Front 973 (C-IH2052) - Single Knife Drive $2150 KGLM40D Knife Lifter Kit suits Macdon 40ft Double Drive D60 (C-IH2152), D75 (C-IH 3152, 3162), New Holland 83C $3350 KGLM45D Knife Lifter Kit suits Macdon 45ft Double Drive D60 (C-IH2152), D75 (C-IH 3152, 3162), New Holland 83C $3550 Spare Parts KDAMAC Knife Drive Arm suits 960 Lift Kit Macdon (C-IH 1040) $650 KDAMAC2 Knife Drive Arm suits Lift Kit Macdon (C-IH ) $650 KDAMAC3 Knife Drive Arm suits 972 Lift Kit Macdon (C-IH 1052) $650 LKHMAC Macdon Part No Knifehead suits 960/962 $270 LKHMAC1 Macdon Part No Knifehead suits 972 $270 LKHMAC5 Macdon D60 (2152) Knifehead (Specify left or right) 5 Tilt $270 LKHMAC10 Macdon 973 (2052) Knifehead (specify left or right) 10 Tilt $ Prices exclude GST

17 Light Crops and Legume Harvesting Plastic Extension Fingers Manufactured from extremely tough, flexible and hard-wearing Polypropylene. Steel insert Positive and secure attachment to your existing knife guards with an existing bolt. Wide tray shape to save pods and heads. 50mm (2 ) wide and 230mm (9 ) long. Ultra-violet stabilised material for long life. Fits original 2 Finger guards or Harvestaire No Choke Guards Save heads in those light thin crops Order No. Model Application Price EXA John Deere Rigid Fronts, New Holland Fronts. Older Massey Ferguson. 4 per foot required $6 ea All Agco/Allis Rigid fronts EXB International 810 Fronts, KG33 Knife Guards on older John Deere and New Holland 4 per foot required $6 ea KG10616 SCH Knife Guard Honeybee 2 Prong - $6 ea EXC John Deere Draper Fronts 900 and 600 Series 3 per foot required $6 ea and Claas Knife Guard per foot required $6 ea EXCJD Clip suits plastic extensions EXC on John Deere Draper 72 per 36 foot required $1 ea EXCBN ¾ x 3 /8 cuphead bolt and nut suits clip on John Deere Draper 72 per 36 foot required $1 ea EXE New Holland C 73C Fronts, Case-IH & 2020 Fronts, Macdon Belt Fronts 4 per foot required $6 ea to and including 972 (Case-IH 1052) EXF Honeybee with Crary or Harvestaire No Choke Guards and Agco Belt Fronts 4 per foot required $6 ea EXG Agco Knife Guard (2007 onwards) 4 per foot required $6 ea EXM Macdon D60 D65 D75 Belt Fronts (Case-IH 2152) New Holland 83C 4 per foot required $6 ea Prices exclude GST 17

18 Draper Front Belting All belting we supply is from WCCO and is the same specification they supply to header manufacturers. WCCO supply 90% of all original equipment belting. All belting has been UV stabilised for long life. Edges and centre are reinforced with a double strip. Highest Quality Available from USA The Industry Leaders and suppliers to original equipment Order No. Model Application and Details Price Agco Side Belting (Sold per foot) SBAG41 All Agco Draper Fronts 41 wide - no V guide $26 per ft SBAG41A Agco Draper Fronts 9250 Series 41 Wide - V guide on edge $31 per ft SBAG41B Agco Draper Fronts 5200 Series 41 Wide - V guide inset 100mm $31 per ft Connector (Sold as a Kit) BCAG41 Suits 41 side belting Includes Bolts and Nuts $45 Centre Feed Belt (Sold as a Kit to exact size with joining holes pre punched and includes a Connector Kit) FBAG60 Agco Draper Fronts 60 wide by 57½ long - no V guide $590 FBAG51 Agco Draper Fronts wide by 63 long with V guide $510 Claas SBCL395 Maxflo 1050 (35ft), 1200 (40ft) - Side Belting 1020mm wide with V guide $28 Honeybee also sold as New Holland Side Belting (Sold per foot) SBHB42 All Honeybee - New Holland to approx wide - no V guide $27 per ft SBHB4175 Honeybee - New Holland 2009 on wide - with V guide $31 per ft SBMD416 Honeybee Series 2015 on (Airflex) 41.6 wide - with V guide $32 per ft Connector (Sold as a Kit) BCHB42 Suits 41¾ and 42 side Belting Includes Bolts and Nuts $52 BCHB69 Suits 69 Centre Belt Includes Bolts and Nuts $90 Centre Feed Belts (Sold as a Kit to exact size with joining holes pre punched and includes a Connector Kit) FBHB34 Honeybee - New Holland - Some early (2 required per machine) 34 wide - no V guide $210 ea FBHB68 Honeybee - New Holland 2009 on wide by 63 long - with V guide $570 FBHB69 Honeybee - New Holland to approx wide by 65 long - no V guide $510 FBHB4175 Honeybee - New Holland 2009 on (2 required per machine) wide - with V guide $ Prices exclude GST

19 Draper Front Belting Order No. Model Application and Details Price John Deere Side Belting (Sold per foot) SBJD36 930D 936D Draper Fronts 36 wide - with V guide $28 per ft SBJD D 635D 640D Draper Fronts 39.5 wide - with V guide $31 per ft Connector (Sold as a Kit) BCJD36 Suits 36 wide belting Includes Bolts and Nuts $52 BCJD395 Suits 39 1 /2 wide belting Includes Bolts and Nuts $52 BCJD55 Suits 55.3 wide centre belt Includes Bolts and Nuts $63 BCJD60 Suits 60 wide centre Belt Includes Bolts and Nuts $70 Centre Feed Belts (Sold as a Kit to exact size with joining holes pre punched and includes a Connector Kit) FBJD60 930D 936D Draper Fronts 60 wide by 63 1 /2 long - with V guide $480 FBJD D 635D 640D Draper Fronts (V Guide 115mm from edge) 55.3 wide by 58 long - with V guide $450 Midwest Side Belting (Sold per foot) SBMW36 All Midwest Draper Fronts 36 wide - with centre V guide $30 per ft Connector (Sold as a Kit) BCJD36 All 36 wide belting Includes Bolts and Nuts $52 Centre Feed Belts (Sold as a Kit to exact size with joining holes pre punched and includes a Connector Kit) FBMW44 Suit Midwest with narrow body centre design 44 wide with V guide $370 FBMW60 Suit Midwest with wide body centre design 60 wide with V guide $430 Case/New Holland Centre Feed Belt FBCNH42 Suits NH800 Series CIH31 Series (OEM ) 42 wide $620 Macdon also sold as Case-IH and New Holland Side Belting (Sold per foot) SBMD416 All Macdon prior D60 and Case-IH prior to wide - with V guide $32 per ft SBMD416DG D60 D65 FD75 Macdon series Case-IH 83C New Holland 41.6 wide - with double V guide $65 per ft SBMD415 Early Case-IH swather, Agware swather 41.5 wide - no V guide $26 per ft SBHB42 Case-IH swathers 8120 on, some Hesston and Versatile 42 wide - no V guide $27 per ft Connector (Sold as a Kit) BCMD416 Suits 41 1 /2, 41.6 side belting Includes Bolts and Nuts $52 BCHB42 Suits 42 side belting Includes Bolts and Nuts $52 Centre Feed Belts (Sold as a Kit to exact size with joining holes pre punched and includes a Connector Kit) FBMD374 Macdon, Case-IH 37.4 wide by 85¾ long - with V guide $360 FBMD384 Macdon, Case-IH 38.4 wide by 97 long - with V guide $390 FBMD415 Macdon, Case-IH 41.5 wide by 85¾ long - with V guide $570 FBMD454 Macdon, Case-IH 45.4 wide by 97 long - with V guide $425 FBMD549 Macdon, Case-IH 54.9 wide by 85¾ long - with V guide $490 FBMD559 Macdon, Case-IH 55.9 wide by 97 long - with V guide $570 FBMD595 Macdon, Case-IH 59.5 wide by 85¾ long - with V guide $630 FBMDDG-IV Macdon, Case-IH, 83C New Holland 78.5 wide by 63¾ long - with single V guide $670 Full Roll Discount Available Prices exclude GST 19

20 Feed Belt Rollers Order No. Model Application and Details Original Part Price Honeybee Feed Belt Rollers hbdr05 Side Belt Driving Roller Honeybee & New Holland (including Bearing) suits 42 Belting $525 hbdr10 Side Belt Idler Roller Honeybee & New Holland (including 2 Bearings) suits 42 Belting $425 HBDRC69 Centre Drive Roller (including Bearing) - Suit Honeybee $650 and New Holland suits FBHB69 Centre Feed Belt No Vee Guide HBIRC69 Centre Idler Roller (including 2 Bearings) - Suit Honeybee $525 and New Holland suits FBHB69C HBDRC68 Centre Drive Roller (including Bearing) - Suit Honeybee $650 and New Holland suits FBHB68 Centre Feed Belt No Vee Guide HBIRC68 Centre Idler Roller (including 2 Bearings) - Suit Honeybee $525 and New Holland suits FBHB68C Heavier Wall Lasts Longer HBHB Hexagonal Bearing - Suits Roller $48 HBHM40 OMP40 Hydraulic Motor suits Honeybee & New Holland Belt Fronts $800 HBHM50 OMP50 Hydraulic Motor suits Honeybee & New Holland Belt Fronts $825 Macdon Feed Belt Rollers MDDR-3962 Side Belt Driving Roller Macdon Case-IH Belt Fronts (No Bearings) MD $525 CIH338721A1 MDIR-3320 Side Belt Idler Roller Macdon Case-IH Belt Fronts MD Roller CIH A1 $495 Roller and Shaft (No Bearings) MD Shaft CIH A1 MDDR-3837 Side Belt Driving Roller Macdon Case-IH Belt Fronts (No Bearings) MD $495 CIH A1 MDIR-0081 Side Belt Idler Roller Macdon Case-IH Belt Fronts MD $495 Roller and Shaft (No Bearings) CIH MDDR-4696 Side Belt Driving Roller Macdon D60 D65 Case-IH 2152 New Holland 83C MD $525 MDIR-4714 Side Belt Idler Roller Macdon D60 D65 Case-IH 2152 New Holland 83C MD $375 MDLAG Lagging Kit for one Roller (3 pieces per roller) $125 MDDR-2205 Drive Roller to suit Case-IH 8820 $490 John Deere NEW Heavier Wall Lasts Longer JDDR36 Side Belt Driving Roller (including Bearing) Suit 936 Draper AH $575 JDHB Hexagonal Bearing - Suit Draper Front Rollers $65 JDIR36 Side Belt Idler Roller (including 2 Bearings) - Suit 936 Draper H H $475 JDDRC900 Centre Drive Roller (including Bearing) - Suit JD 900 Series Draper Fronts AH $695 JDIRC900 Centre Idler Roller (including 2 Bearings) - Suit JD 900 Series Draper Fronts H $550 JDDR40 Side Belt Driving Roller (including Bearing) - Suit Draper AXE16282 $575 JDDIR40 Side Belt Idler Roller (including Bearing) - Suit Draper H $ Prices exclude GST

21 Pickup Belts Order No. Model Application and Details Original Part Teeth/Belt Price Case-IH PBCIHBO Belt suits , 21¾ wide 60 1 /8 long (No Teeth Fitted) 60 Teeth $150 PBSMFB Front belt suits 2015 model, 18¾ wide 57¾ long (No Teeth Fitted) $110 PBSMRB Rear belt suits 2015 model, 18¾ wide 57¾ long $100 John Deere PBJDBO Belt suits Roller Models 22 wide 66½ long (No Teeth Fitted) 60 Teeth $150 PBJDBO5 Belt with holes 44½ wide x 57¼ long suits JD615P (No Teeth Fitted) 92 Teeth $300 Phillips Swathmaster PBSMFB Front belt suits late model with ¼ cleats. 18¾ wide 57¾ long (No Teeth Fitted) 42 Teeth $120 PBSMRB Rear belt suits late model with ¼ cleats. 18¾ wide 57¾ long $110 PBSMJNR Flat Joiner Strip incl Bolts and Nuts $20 PBSMFBW Front belt suits late model Rollerdown 37¾ wide 57¾ long (No teeth fitted) 84 Teeth $335 PBSMRBW Rear belt suits late model Rollerdown 37¾ wide 57¾ long $300 New Holland PBNHBO Front Belt 1515mm wide suits NH790CP Teeth $390 PBNHRB Rear Belt 1515mm wide suits NH790CP $450 NEW Victory PBVICFB1 Front Belt 17½ wide x 44¼ long (No Teeth Fitted) Teeth $110 PBVICRB1 Rear Belt 17½ wide x 44¼ long $100 PBVICFB2 Front Belt 17½ wide x 53½ long (No Teeth Fitted) Teeth $110 PBVICRB2 Rear Belt Plain Belt 17½ wide x 53½ long $140 Teeth PBTEETH-SP Single Prong Teeth Victory $1 PBTEETH-DP Double Prong Teeth suits Case-IH, John Deere, Smales, Swath Master, Allis $1.80 PBBN Bolt and Nut suits double prong teeth ¾ (No fangs) $0.50 PBSPBN Bolt and Nut suits single prong teeth 1 (No fangs) $0.85 PBJB Bolt and Nut to join ends of Pick Up Belts ¾ (With fangs) $1.75 NEW NEW Prices exclude GST 21

22 Improved Concaves for Axial Flow and Rotaries Helical Bar Concaves Case-IH Case-IH 66 and 88 Series John Deere STS Slower Rotor Speeds Wider Concave Openings Improved threshing Reduced rotor losses Fuel savings Work longer each day Start earlier Finish later The Helical placement of the bars in these concaves is used so the material approaches the bars at right angles this gives a greater threshing action. The improved threshing action gives you more harvesting hours in the day in those tough crops. The tougher the crop the more these concaves shine! Case-IH Axial Rotor Machines show excellent improvement in threshing capability when fitted with these concaves If you have a specialty rotor, use them with Gorden Rotor Bars for the ultimate performance improvement. Use one or two segments in JD and Case-IH (except Case-IH needs a set one left and one right). Order No. Item Model Application Price Case-Ih HBCIHC40 Helical Bar Concave Segment with wires $1600 and feed lip HBCIHC80 Helical Bar Concave Segment with wires $1625 and feed lip HBCIH8010 Helical Bar Concave Set with wires early $2500 (Includes 1 left, 1 right) early, early per set of two John Deere HBJDSTS Helical Bar Concave Segment with wires 9650STS 9750STS 9660STS 9760STS 9860STS 9770STS 9870STS $2000 and feed lip S660 S670 S680 S690 CJDSTSLK Latch Kit 60 Type Set of 3 When fitting to 9650STS or 9750STS $100 per set of three Australian Patent Applies. 22 Prices exclude GST

23 Concaves Axial Flow and Rotary Models Fully Machined Concaves that make a real difference to your threshing. Most harvesters now use a Rotary or Axial Flow threshing cylinder design. This has increased tonnes per hour dramatically in recent years. Conventional A properly tuned harvester will thresh and separate to a high standard. Because clearances of rotor bars from concaves are commonly greater than more conventional concaves they are often regarded as not so critical. But clearances are critical whenever threshing gets hard and concaves have to be closed up. So we strongly recommend rotor bars are shimmed to a uniform clearance off the concaves so you are ready for tough threshing conditions. Heavy Duty Harvestaire concaves are heavier than originals. This reduces stretch and bowing (or opening up) of concaves which means some areas of the concaves are further away from the rotor bars than others Prices exclude GST 23

24 Concaves Order No. Model Application Description & Comments Price Agco/Allis CGL-R6272 R62, R72 Concave only $2000 CGLG-R6272 R62, R72 Grate only $2500 Case-IH CIHC , 1620 Set of 3 Concaves No Extensions $2400 a set CIHC , 1460, 1640, 1660, 1644, 1666, 2144, 2166, 2366 Set of 3 Concaves No Extensions $2400 a set CIHC , 1660, 1644, 1666, 2144, 2166, 2366 Set of 3 Concaves Incorporating Extensions and front lip $2700 a set CIHC F 1640, 1660, 1644, 1666, 2144, 2166, 2344, 2366 Front Concave segment with front lip $1050 ea CIHC MR 1640, 1660, 1644, 1666, 2144, 2166, 2344, 2366 Middle/Rear Concave segment $1000 ea CIHC , 1688, 2188, 2377, 2388, 2588, 7088 Set of 3 Concaves Extensions and front lip Heavy Duty $4000 a set CIHC F 1680, 1688, 2188, 2377, 2388, 2588, 7088 Front Concave segment with front lip Heavy Duty $1350 ea CIHC MR 1680, 1688, 2188, 2377, 2388, 2588, 7088 Middle/Rear Concave segment Heavy Duty $1200 ea NB. Concave includes extension piece therefore stronger & less expensive applicable to CIHC and CIHC CIHC-8010LH 8010, 7010, 7120, 8120, 9120, 7230, 8230, 9230 Left Hand Concave $825 CIHC-8010RH 8010, 7010, 7120, 8120, 9120, 7230, 8230, 9230 Right Hand Concave $825 Caterpillar/Claas CCAT480 Lexion 480, 580 Heavy duty wire and bar type $3000 CFD-116 Claas Heavy duty wire and bar type $1600 John Deere CJD & 7720 Titan 2 14 cross bars Wrap Around $1550 CJD & 8820 Titan 2 14 cross bars Wrap Around $2100 CJD , 9500, CTS, CTSII Wrap Around - Small Grain - 14 Cross Bars $2400 CJD , 9610 Wrap Around - Small Grain - 14 Cross Bars $2800 CJD-STS STS, 9660STS, 9750STS, 9760STS, 9860STS Set of 3 Concaves Standard Wire Spacing for small grain $ STS, 9770STS, 9870STS, S660, S670, S680, S690 with front lip 31 Wires per Concave CJDSTS-9660W 9650STS, 9660STS, 9750STS, 9760STS, 9860STS Set of 3 Concaves Wide Wire Spacing with front lip $ STS, 9770STS, 9870STS, S660, S670, S680, S Wires per Concave CJDSTS-9660F 9650STS, 9660STS, 9750STS, 9760STS, 9860STS Front Concave Segment Standard Wire Spacing for small grain $ STS, 9770STS, 9870STS, S660, S670, S680, S690 with front lip CJDSTS-9660WF 9650STS, 9660STS, 9750STS, 9760STS, 9860STS Front Concave Segment Wide Wire Spacing with front lip $ STS, 9770STS, 9870STS, S660, S670, S680, S690 CJDSTS-9660-MR 9650STS, 9660STS, 9750STS, 9760STS, 9860STS Middle Rear Concave Segment Standard Wire Spacing $ STS, 9770STS, 9870STS, S660, S670, S680, S690 for small grain CJDSTS-9660WMR 9650STS, 9660STS, 9750STS, 9760STS, 9860STS Middel/Rear Concave Segment Wide Wire Spacing $ STS, 9770STS, 9870STS, S660, S670, S680, S690 CJDSTSLK Latch Kit 60 Type Set of 3 When fitting CJDSTS9660 or CJDSTS-9660W to 50 Series STS $100 set of 3 All Concaves are fitted with Wires 24 Prices exclude GST

25 Concaves Order No. Model Application Description & Comments Price New Holland Conventional Headers CNH-860 CX820 CX840 CX860 CX880 CX8080 $1850 CNH-34 TX34 TX64 TX65 $1750 CNH-36 TX36 TX66 TX68 $2000 New Holland Twin Rotor Machines CNH96-11 TR86 above S/N TR96 above S/N Concaves, replace LH and RH (Includes Wires) $4250 TR CNH-960 CR920 CR940 CR960 CR9040 CR9060 Concave OEM Fits left or right (Not inc Extension) $1575 ea OEM CNH-960-Ext CR920 CR940 CR960 CR9040 CR9060 Concave Extension replaces (Fits left or right) $875 ea CNH-970 CR8090 CR970 CR980 CR9070 CR9080 CR9090 Concave OEM Fits left or right $1700 ea (Not inc Extension) All Are Fitted With Wires CNH-970-Ext CR8090 CR970 CR980 CR9070 CR9080 CR9090 Concave Extension replaces (Fits left or right) $1050 ea per set of 2 All Concaves are fitted with Wires Concave Wire for Repairs and Replacement Wire mm Diameter Per Metre $1.90 Wire mm Diameter Sold by the metre and supplied in a coil, just cut to length Per Metre $2.00 Wire mm Diameter and fit High Tensile Spring Wire Wear Resistant. Per Metre $2.10 Wire mm Diameter Per Metre $2.30 Wire mm Diameter Per Metre $ Prices exclude GST 25

26 Rotor Bars & Drumbars Are your Rotor Bars and Drumbars worn? Worn bars cost you money in extra fuel, time and poor threshing. If the leading edge or centre section are worn more than 3 mm ( 1 / 8 ) then they need replacement. We have high quality sets of Drum and Rotor Bars Available. All sets are matched for weight for a balanced Rotor/Drum and come with bolts, nuts, washers and shims so you can set a uniform clearance from the concave. Available in two different grades: Standard Hard equivalent to original equipment. Chrome The ultimate in long life and we have chrome or chrome alloy available in most bars. Model Application No. of Bar Type & Particulars Standard Standard Bars Hard Chrome Hard Chrome Price Price Agco/Allis OGL-N-1 OGLN1C N & R Series P1 Processor 8L Threshing cylinder, angle long bars $990 $1330 OGL-N-2 OGLN2C N & R Series P1 Processor 6L & 2R Separator cylinder, angle short bars $625 $900 - OGL-4050CL R Series with P3 Processor Chrome Forward 1 / 2 Tooth Spacing (Left) $125 ea - OGL-4050CR R Series with P3 Processor Chrome Reverse 1 / 2 Tooth Spacing (Right) $125 ea - OGL-4050WCL R Series with P3 Processor Chrome Forward ¾ Tooth Spacing (Left) $125 ea - OGL-4050WCR R Series with P3 Processor Chrome Reverse ¾ Tooth Spacing (Right) $125 ea Case-IH OIHC Axial Flow 16 8 helical, 8 flat bars suits standard rotor $725 OIHC-1440 OIHC1440C helical, 9 flat bars suits standard rotor $875 $ OIHC-1480 OIHC1480C helical, 12 flat bars suits standard rotor $975 $ OIHC-NS-2CA Rotor bar chrome alloy $38 ea or 74 suits specialty rotor OIHCWS Rotor Bar chrome alloy suits specialty rotor $ with spike All sets include Bolts, Nuts, Washers & Shims in the price. 26 Prices exclude GST

27 Rotor Bars & Drumbars Model Application No. of Bar Type & Particulars Standard Standard Bars Hard Chrome Hard Chrome Price Price Case-IH continued SPRIHC-S 20 s 2 Straight separator bar $110 ea 40 s 60 s 44 s 66 s 3 77 s 80 s 88 s 8 SPRIHC Helical kicker plate Rear $130 ea (Speciality Rotors only) SPRIHC Helical kicker plate Rear $130 ea (Speciality Rotors only) STRIHC-S 20 s 4 42 smooth bar $80 ea 40 s 60 s 44 s 66 s 3 Hardened 80 s 88 s 4 STRIHC-T 20 s 4 42 toothed bar $105 ea 40 s 60 s 44 s 66 s 3 Hardened 80 s 88 s 4 Claas OFD114 - Mega L & 3R Angle Bars $700 DRBSC Drum bar shim 0.5mm Claas only 50c ea Caterpillar OCAT R 4L & 4R Angle Bars Bolt on $1000 OCAT480W R 4L & 4R Angle Bars Bolt & Weld on $1000 Drum Bar Shims DRBS All Makes & Models Drum Bar Shim 0.5mm (20 Thou of an inch) 40c ea DRBS2 Drum Bar Shim 2mm 50c ea John Deere OJD-7700 OJD-7700C Titan 2 4L & 4R Angle bars $900 $1300 OJD-8820 OJD-8820C Titan 2 4L & 4R Angle bars $990 $1350 OJD-9500 OJD-9500C L & 5R Angle bars $1000 $1550 CTS CTSII 9650CTS OJD-9600 OJD-9600C CWS 9660CWS 5L & 5R Angle bars $1100 $1700 John Deere sts and CTS STS Threshing Elements OJD-E-STS50H 9650STS 9750STS 9660STS 9760STS Set of 3 Hardened $ STS 9670STS 9770STS 9870STS S660 S670 S680 S690 Threshing Elements (5 sets per machine) OJD-TS-CTSH CTS CTSII 9650CTS 9660CTS 16 Tyne Short Hardened separator $22 OJD-TL-CTSH CTS CTSII 9650CTS 9660CTS 28 Tyne Long Hardened separator $25 OJD-T-STS50H 9650STS 9750STS 9660STS 9760STS, Set of 3 Hardened Tynes $ STS 9670STS 9770STS 9870STS 9880STS S660 S670 S680 S690 or separator (8 sets per machine) Original Part: AH All sets include Bolts, Nuts, Washers & Shims in the price Prices exclude GST 27

28 Rotor Bars & Drumbars Model Application No. of Bar Type & Particulars Standard Standard Bars Hard Chrome Hard Chrome Price Price Massey Ferguson OMF L & 4R Angle bar $900 - OMF L & 4R Angle 5-hole bar $950 - New Holland ONH TX34 TX64 4L & 4R Angle bar $900 ONH TX36 TX66 TX68 4L & 4R Angle Bar $975 ONHCX CX820 CX840 CX860 CX880 CX8080 CX8090 5L & 5R Angle bar $1275 ONH-96H ONH-96C TR86 above Serial No $3000 $4100 TR96 above Serial No Flat & 12 Angle TR87 TR88 TR89 TR97 TR98 TR99 CR920 CR940 CR960 CR9040 CR9060 ONH-970H - CR970 CR980 CR9070 CR L & 9R Flat $4500 CR9090 9L & 9R Angle HPNH CR920 CR940 CR Separator Blade $13 ea Gorden Rotor Bars CR970 CR980 CR9070 CR9080 CR inc. Bolts/Nuts All sets include Bolts, Nuts, Washers & Shims in the price. For Case-IH Specialty Rotors Each Gorden Rotor Bar replaces two original bars. These bars achieve:- SUPERIOR THRESHING LESS ROTOR LOSS INCREASED CAPACITY but Less HP and Fuel Made from 15-3 chrome alloy. After hours you can barely see any wear the chrome is right through the bar. (Not just chrome plated). Fit a max of 15 bars on fit in sets of 3. Fit a max of 20 on fit in sets of 4. Fit a max of 16 bars on Order No. Model Application Price SP $185 ea Max 15 Bars per Rotor SP1680C $185 ea (Except ST Rotor with smaller tube) Max 20 Bars SP2388R $185 ea (Separator Bar - Rear of Rotor) Gorden Concave Cover Plates It s vital to shim your drum or rotor bars for proper threshing Order No. Description Model Application Price For improved threshing Avoid overloading CP2166 Cover Plate Set of $440 the right hand side distribution augers CP2188 Cover Plate Set of $460 Fit to the front concave segment and the first half of the second segment. 28 Prices exclude GST

29 Wear Bars When the edges of your wear bars are worn, replace them with hardened or chromed wear bars. Order No. Model Application Contents of Set Price Price Standard Chrome Standard Chrome Case-Ih-Axial-Flow WBIHC-20H Bar Set Replaces Part C2 $290 WBIHC-40H WBIHC-40C Bar Set Replaces Part C2 $290 $460 WBIHC-80IH WBIHC-80IC Bar Set Replaces Part C2 $212 $320 WBIHC Bar Set Replaces Part $305 John Deere STS WBJD STS 9750STS 9660STS 9760STS Front Rotor Flight Kit Non Bullet Rotor (AH204533) $540 WBJD STS 9750STS 9660STS 9760STS Rear Rotor Flight Kit Non Bullet Rotor (AH204534) $540 New Holland Twin Rotors WBNH-1H TR70 TR85 TR86 TR87 Replaces Part Set for very front of Rotors $450 TR88 TR consists of 2 Left Hand Bars & TR96 TR97 TR98 TR99 2 Right Hand Bars CR940 CR Hardened Bars CR9040 CR9060 CR9070 All Sets Include Bolts & Nuts In The Price WBNH-2H TR70 TR85 TR86 TR87 Replaces Part Set for front of Rotors but behind WBNH-1H $390 TR88 TR89 consists of 4 Left Hand Bars & TR96 TR97 TR98 TR Right Hand Bars CR940 CR Hardened Bars CR9040 CR9060 CR9070 WBNH-19H CR970 CR980 CR Set for Left Hand Rotor $540 CR For Front of Rotor WBNH-29H CR970 CR980 CR Set for Right Hand Rotor $540 CR For Front of Rotor HPNH-6791 CR9040 CR9060 CR Rotor Lug Right Hand Serrated $135 CR9080 CR9090 HPNH-6792 CR9040 CR9060 CR Rotor Lug Left Hand Serrated $135 CR9080 CR9090 Case-IH Axial Flow Rotor Blade Kit (Elephant Ears) Order No. Model Application No. in Kit Original Part Price BK C3 $450 BK C3 $800 BK Specialty Rotor C3 $800 BKAFX AFX Rotor A3 $800 Blade Kits are manufactured from abrasive resistant steel for longer wear. High strength. Grade 8 Bolts, Nuts included. AFX Standard or speciality Prices exclude GST 29

30 Top Sieves, Bottom Sieves and Pre Cleaners STANDARD LOUVRE TOP & BOTTOM Our top and bottom sieves perform the same as originals, but have nylon bushes so they don t wear out! Air Foil Louvre BOTTOM SIEVE AirFoil bottom sieves are virtually impossible to overload as the louvres do not deflect or close up under a heavy stream of grain as is frequently the case with traditional bottom sieves, particularly when they are worn. This makes normal sieves very difficult to adjust. It s common to find the normal sieve either putting too much good grain in the repeats or letting too much rubbish in the sample. Strong Louvre Design prevents deflection by the weight of grain Cut LOSSES IMPROVE capacity Air Foil Louvre TOP SIEVE Cut losses IMPROVE capacity Airfoil Top Sieves have a unique Louvre design that divides the airflow and creates a bed of air jets which float chaff up off the surface and allows the heavier grain to easily separate and fall. Wires and Leuvres can be Replaced Nylon Bushes on all Wires to Drastically Reduce Wear Nylon Anti-Wear Bush 30 Prices exclude GST

31 Top Sieves Order No. Model Application Price Standard Air Foil Standard Air Foil Louvre Louvre Louvre Louvre Agco/Allis SGL-NRT PGL-NRT Allis N5 N6 N7 R60 R70 (49 1 / 2 Long) $1370 $1370 Sgl-r62RT PGL-r62rt Agco R62 R72 R75 (64 Long) Advise if manual or electric $1670 $1670 Case-IH SIHC-1420RT PIHC-1420RT Inter 1420 Case-IH 1620 $1085 $1085 SIHC-1440RT PIHC-1440RT Inter Case-IH $1250 $1250 SIHC-1666RT PIHC-1666RT Case-IH $1400 $1400 SIHC-1480RT PIHC-1480RT Inter 1480 Case-IH 1680 Standard Length Sieve $1560 $1560 SIHC-1680RTL PIHC-1680RTL Case-IH 1680 Long Sieve Models $1785 $1785 SNH-960RT PNH-960RT Case-IH $1160 $1160 SNH-970RT PNH-970RT Case-IH (set of 2 required) $1025 ea $1025 ea Caterpillar SCAT-470RT PCAT-470RT Caterpillar 470 (set of 2 required) $1025 ea $1025 ea SCAT-480RT PCAT-480RT Caterpillar (set of 2 required) $1160 ea $1160 ea John Deere SJD-7700RT PJD-7700RT John Deere $1350 $1350 SJD-7720T2RT PJD-7720T2RT John Deere 7720 Titan 2 $1475 $1475 SJD-8820-RT PJD-8820-RT John Deere 8820 $1700 $1700 SJD-8820T2RT PJD-8820T2RT John Deere 8820 Titan 2 $1850 $1850 SJD-9500RT PJD-9500RT John Deere CTS CTSII (set of 2 required) $590 ea $590 ea SJD9500E CTS CTSII Extension $535 $535 SJD-9600RT PJD-9600RT John Deere (set of 2 required) $775 ea $775 ea SJD9600E Extension $590 $590 SJD-9650RT PJD-9650RT John Deere STS Models $1450 $1450 Manual Adjustment version (Fits some early 60 series also) SJD-9660RT PJD-9660RT John Deere STS Models $1450 $1450 Electric Adjustment version (Fits some late 50 series also) SJD-670RT PJD-670RT John Deere S660 S670 S680 S690 Single Adjustment - Electric $1685 $1685 SJD-690RT PJD-690RT John Deere S660 S670 S680 S690 Dual Adjustment - Electric $1735 $1735 HPJD-4081 HPJD-4081 Wiring Harness AXE14081 Suit most STS Models $185 $185 Massey Ferguson SMF-9700RT PMF-9700RT MF9720 and White 9700 $1780 $1780 SMF-8780RT PMF-8780RT Massey Ferguson $1780 $1780 SMF-9790RT PMF-9790RT Massey Ferguson Challenger 670 $1945 $1945 New Holland SNH-8060RT PNH-8060RT New Holland $1120 $1120 SNH-70RT PNH-70RT New Holland TR70 TR85 TR86 TR87 TR88 $970 $970 SNH-95RT PNH-95RT New Holland TR95 TR96 TR97 TR98 TR99 TR89 $1300 $1300 SNH-TX34RT PNH-TX34RT New Holland TX34 TX64 TX65 $1200 $1200 SNH-TX66RT PNH-TX66RT New Holland TX66 TX68 (set of 2 required) $1000 ea $1000 ea SNH-960RT PNH-960RT New Holland CR940 CR960 CR9060 CR7090 CR8080 CR9060 $1160 $1160 (Not including linkages) SNH-970RT PNH-970RT New Holland CR970 CX860 CX880 CX8080 CX8090 $1025 ea $1025 ea CR8090 CR9070 CR9080 CR9090 (Not including linkages) (set of 2 required) SNH-70E TR70 TR85 TR86 TR87 TR88 Extension $395 $395 SNH95E TR95 TR96 TR97 TR98 TR89 TR99 Extension $660 $660 If your sieve is not listed please enquire. We can probably make to order Prices exclude GST 31

32 Bottom Sieves Order No. Model Application Price Standard Air Foil Standard Air Foil Louvre Louvre Louvre Louvre Agco/Allis SGL-NB PGL-NB Allis N6 N7 R60 R62 R70 (42 1 / 2 Long) $1260 $1260 SGL-R62B PGL-R62B Agco R62 R72 R75 (57¼ Long) $1485 $1485 Case-IH SIHC-1420B PIHC-1420B Inter 1420 Case-IH 1620 $975 $975 SIHC-1440B PIHC-1440B Inter Case-IH $1080 $1080 SIHC-1666B PIHC-1666B Case-IH $1225 $1225 SIHC-1480B PIHC-1480B Inter 1480 Case-IH 1680 Standard Length Sieve $1400 $1400 SIHC-1680BL PIHC-1680BL Inter 1680 Long Sieve Case-IH $1485 $1485 SNH-960B PNH-960B Case-IH $1140 $1140 SNH-970B PNH-970B Case-IH (set of 2 required) $920 ea $920 ea Caterpillar SCAT480B PCAT480B Caterpillar 480 $885 $885 John Deere SJD-7700B PJD-7700B John Deere $1100 $1100 SJD-7720T2B PJD-7720T2B John Deere 7720 Titan 2 $1200 $1200 SJD-8820B PJD-8820B John Deere 8820 $1275 $1275 SJD-8820T2B PJD-8820T2B John Deere 8820 Titan 2 $1365 $1365 SJD-9500B PJD-9500B John Deere CTS CTSII (set of 2 required) $690 ea $690 ea SJD-9600B PJD-9600B John Deere (set of 2 required) $830 ea $830 ea SJD-9650B PJD-9650B John Deere STS Models $1340 $1340 Manual Adjustment Version (Fits some early 60 series also) SJD-9660B PJD-9660B John Deere STS Models $1340 $1340 Electric Adjustment Version (Fits some late 50 series also) SJD-670B PJD-670B John Deere S660 S670 S680 S690 $1660 $1660 HPJD-4081 HPJD-4081 Wiring Harness AXE14081 Suit most STS Models $185 $185 Massey Ferguson SMF-9700B PMF-9700B Massey Ferguson 9720 & White 9700 $1490 $1490 SMF-8780B PMF-8780B Massey Ferguson $1545 $1545 SMF-9790B PMF-9790B Massey Ferguson Challenger 670 $1660 $1660 {Advise if manual or electric} New Holland SNH-8060B PNH-8060B New Holland (specify 1250mm or 1260mm wide) $1100 $1100 SNH-70B PNH-70B New Holland TR70 TR85 TR86 TR87 TR88 $945 $945 SNH-95B PNH-95B New Holland TR95 TR96 TR97 TR98 TR89 TR99 $1275 $1275 SNH-TX34B PNH-TX34B New Holland TX34 TX64 TX65 $1160 $1160 SNH-TX66B PNH-TX66B New Holland TX66 TX68 (set of 2 required) $900 ea $900 ea SNH-960B PNH-960B New Holland CR940 CR960 CR9060 CR7090 CR8080 $1140 $1140 (Not including linkages) SNH-970B PNH-970B New Holland CR970 CR8090 CR9070 CR9080 CR9090, $925 ea $925 ea CX860 CX880 CX8080 CX8090 (Not including linkages) (set of 2 required) If your sieve is not listed please enquire. We can probably make to order. 32 Prices exclude GST

33 Pre Cleaners Order No. Model Application Price Standard Air Foil Standard Air Foil Louvre Louvre Louvre Louvre Case-IH SNH-960P PNH-960P Case-IH Precleaner $1125 $1125 SNH-970P PNH-970P Case-IH Precleaner $1195 $1195 John Deere SJD-9500P PJD-9500P John Deere 9500 CTS CTSII Precleaner (set of 2 required) $600 ea $600 ea SJD-9600P PJD-9600P John Deere Precleaner (set of 2 required) $775 ea $775 ea STS Adjustable Precleaner Most JD STS s have fixed louvres on the precleaner. The Harvestaire Precleaner can be adjusted so you can clean up the sample and get maximum capacity. Complete with anti-wear nylon bushes. SJD-9650PF John Deere Adjustable Pre Cleaner $1260 Flat Style (Qty 8 M8 welded in bolts) SJD-9660PH John Deere Adjustable Pre Cleaner $1340 Hump style (Qty 8 M8 welded in bolts) SJD-9870PF John Deere Adjustable Pre Cleaner $1260 Flat style (Qty 4 M10 welded in bolts) SJD-9870PH John Deere 9870 Adjustable Pre Cleaner $1340 Hump style (Qty 4 M10 welded in bolts) SJD-670PH John Deere S660 S670 S680 S690 Adjustable Pre Cleaner $1340 Hump style (Qty 8 M10 loose bolts) New Holland SNH-960P PNH-960P New Holland CR940 CR960 CR9060 CR7090 CR8080 Pre Cleaner $1125 $1125 SNH-970P PNH-970P New Holland CR970 CR8090 CR9070 CR9080 CR9090 $1195 $1195 CX860 CX880 CX8080 CX8090 Pre Cleaner If your sieve is not listed please enquire. We can probably make to order Prices exclude GST 33

34 Gorden AirJet Sieve For improved capacity and cleaner samples No adjustment required just set the fan speed and go Mesh elements available for different crops Easily changed the frame remains in position How AirJet Sieves Work The thin layer of high velocity air streaming from the AirJet above the screen blows chaff rearward. The heavier grain penetrates the streaming air and falls through the screen. The screens face towards oncoming grain for faster separation. Screen hole size is selected to match specific crops. Air JET Air JET Canola.125 (3.15mm) Round holes Mesh ELEMENTS AVAILABLE: Large Wheat.3 (7.62mm) Hex holes Lupins/Barley.45 (11.4mm) Hex holes Order No. Model Application & Description Price Case-IH Axial Flow AJCIH Air Jet sieve frame $1350 AJNWLCN Set of canola elements suits AJCIH2388 $2050 AJNWLWH Set of large wheat elements suits AJCIH2388 $1900 AJNWLB Set of lupin/barley elements suits AJCIH2388 $1900 AJCIH Air Jet sieve frame $1200 AJNLCN Set of canola elements suits AJCIH2366 $1550 AJNLWH Set of large wheat elements suits AJCIH2366 $1450 AJNLB Set of lupin/barley elements suits AJCIH2366 $1450 John Deere AJJD STS Models Air Jet Sieve Frame $1250 AJJD670 S660 S670 S680 S690 Air Jet Sieve Frame $1400 AJJDNWLW Set of large wheat elements suits AJJD9650 $1900 NEW AJJDNWLB Set of large lupin/barley elements suits AJJD9650 $1900 AJJDNWLWS Set of large wheat elements suits AJJD9670 $1900 AJJDNWLBS Set of large lupin/barley elements suits AJJD9670 $1900 Case-IH & New Holland CR8090 CR970 CR9070 CR9080 CR9090 AJCNH T CIH Air Jet sieve frame (2 required per machine) $700 & NH CR8090 CR970 CR9070 CR9080 CR9090 AJCNH P CIH Air Jet precleaner frame (1 required per machine) $700 & NH CR8090 CR970 CR9070 CR9080 CR9090 AJCNHCNWP Set of canola elements suits AJCNHP Precleaner $1050 AJCNHCNNT Set of canola elements suits AJCNHT Sieve (Enough for 1 machine) $1300 AJCNHLWP Set of large wheat elements Precleaner $900 AJCNHLWT Set of large wheat elements Sieve (Enough for 1 machine) $1200 AJCNHLBP Set of lupin barley elements Precleaner $900 AJCNHLBT Set of lupin barley elements Sieve (Enough for 1 machine) $ Prices exclude GST

35 Canola Sieves These Sieves will get you through the tough receival standards This special mesh sieve has been specifically designed for Canola. If you are experiencing trouble with a Dirty Sample the use of our Mesh Sieve should clean up your canola and avoid the need to grade it after Harvest. These Sieves are fitted with Expanded Metal Mesh. We guarantee these Sieves will get your Canola clean enough to meet receival standards. PLEASE NOTE: Being a Mesh Sieve, occasional cleaning with a simple scraper may be required if your Canola has radish, volunteer cereals, green or excessive trash. Order No Model Application Price Agco/Allis ecgl-r62t Agco R62 R72 Top $1000 Case-IH ECIHC-1666T Case-IH Top $910 ECIHC-1680T Inter 1680 LONG SIEVE Case-IH Top $1040 ECNH66T (set of 2 required) Case-IH Top $550 ea ECNHCR960T Case-IH Top $940 Caterpillar ECMF9790T Challenger 670 Top $1130 ECCAT480T (set of 2 required) Lexcen Top $550 ea John Deere ECJD-9500T (set of 2 required) John Deere CTS CTSII 9450 CWS 9550 CWS Top $450 ea ECJD-9600T (set of 2 required) John Deere CWS 9650 CTS Top $510 ea ECJD-9650T John Deere , STS Top $990 ECJD-S670T John Deere S660 S670 S680 S690 Top $1000 Massey Ferguson ECMF8780 Massey Ferguson Top $1000 ECMF9790 Massey Ferguson Top $1120 New Holland ECNH-70T New Holland TR85 TR86 TR87 TR88 Bottom or Top $700 ECNH-70E New Holland TR85 TR86 TR87 TR88 Extension $280 ECNH-95T New Holland TR95 TR96 TR97 TR98 TR89 TR99 Bottom or Top $880 ECNH-95E New Holland TR95 TR96 TR97 TR98 TR89 TR99 Extension $340 ECNH-66T (set of 2 required) New Holland CR970 CR8090 CR9070 CR9080 CR9090 Top $550 ea CX860 CX880 CX8080 CX8090 TX36 TX66 TX68 ECNHCR960T New Holland CR940 CR960 CR6090 CR7090 CR8080 Top $940 ECNH960P New Holland CR940 CR960 CR6090 CR7090 CR8080 Precleaner $750 ECNH970P New Holland CR970 CR8090 CR9070 CR9080 CR9090 Precleaner $800 We can make to suit any harvester not listed above Prices exclude GST 35

36 Posifeed Rollers Posifeed Rollers overcome poor feeding at the feeder house or can be used as a replacement roller The posifeed rollers are made as a triangular shape with rings for the chains to run on. The crop can be taken away more effectively as it has room between the slats of the feeder chain and open segments of the triangular roller. Crop feeds in more continuously and smoothly and doesn t feed in lumps. HEAVY DUTY Order No. Item Model Application Price Agco PFRGL6272 Posifeed Roller R62 R72 $1150 Case-Ih PFRCIH60 Posifeed Roller suits 2 & 3 chain $ PFRCIH80 Posifeed Roller suits 2 & 3 chain $ PFRCIH88 Posifeed Roller $1075 John Deere PFRJD9500 Posifeed Roller CTS CTSII $ STS 9750STS 9760STS 9860STS PFRJD9600 Posifeed Roller $1500 PFRJD70 Posifeed Roller 9670STS 9770STS 9870STS S660 S670 S680 S690 $1250 PFRJD60AK Bearing Housing - 3 Hole Required to fit roller to 9660STS 9760STS and 9860STS (2 required) 3 Hole $85 PFRJD60AK4 Bearing Housing - 4 Hole Required to fit roller to 9660STS 9760STS and 9860STS (2 required) 4 Hole $50 New Holland PFRNHTR86 Posifeed Roller TR87 above S/No TR88 TR89 TR86 $1060 (10¾ Diameter) TR97 TR98 TR99 TR96 above S/No (3 Bolt Bearing Housing) Use where original roller is 12 diameter. If original roller is 9 add links to feeder chain PFRNH960 Posifeed Roller (6 Bolt Bearing Housing) CR940 CR960 CR9060 CR7090 CR8080 $1260 PFRNH970 Posifeed Roller Suit 3 Chain CR970 CR8090 CR9070 CR9080 CR9090 $1375 CX860 CX880 CX8080 CX8090 PFRNH9070 Posifeed Roller - Suit 4 Chain CR8090 CR9070 CR9080 CR9090 $ Prices exclude GST

37 Feeder Chains Improved Hi-tensile Slats Top Quality Italian Chains All Slats Serrated Large stocks on hand at the right price Order No. Model Application Chain Number Description Price Type Of Chains Agco/Allis FGL-NB N5, N6, N7, R60, R70 CA557 3 Chain Heavy Duty U Slat suits Front or Rear $1360 ea FGL-4050 R40, R50, R42, R52 early CA550 2 Chain 85 Links Heavy Duty U Slat suits Front or Rear $760 FGL R62, R72 CA557 3 Chain 96 Links Heavy Duty U Slat suits Front or Rear $1415 ea Case-IH FIHC , 1440, 1460, 1620, CA557 3 Chain Heavy Duty U Slats. Extra Sprocket and $ , 1660, 1644, 1666 Feed Roller Bands required if fitting for first time FIHC , 1440, 1460, 1620, CA557 2 Chain $ , 1660, 1644, 1666 FIHC , 1680 CA557 3 Chain Heavy Duty U Slats. Extra Sprocket and $1030 Feed Roller Bands required if fitting for first time FIHC , 1680 CA557 2 Chain $1000 FIHC , 2166, 2366 CA557 3 Chain Heavy Duty U Slats $1030 FIHC , 2188, 2377, 2388 CA557 3 Chain Heavy Duty U Slats $ , 5088, 6088, 7088 FIHC Case-IH 8010 (Early model) CA557 2 Chain Heavy Duty U Slats (12 7 /8 centre to centre on chains) $975 ea 2 required per machine FIHC Case-IH 7010, 8010 CA557 2 Chain Heavy Duty U Slats (18 centre to centre on chains) $975 ea 2 required per machine FIHC-9642 Case-IH 7120, 7230, 7240, CA557 4 Chain Heavy Duty U Slats Suits NO ROCKTRAP $ , 8230, 8240, Chain Spacing across Feeder House 14, 15½, , 9230, Links 42 Slats Original Part FIHC-9639 Case-IH 7120, 7230, 7240, CA557 4 Chain Heavy Duty U Slats Suits with ROCKTRAP $ , 8230, 8240, Chain Spacing across Feeder House 12, 15½, , 9230, Links 36 Slats Original Part Please check chain spacing across the Front Roller Prices exclude GST 37

38 Feeder Chains Order No. Model Application Chain Number Description Price Type of Chains Case-IH FIHC C CA557 2 Chain $1000 FIHC C CA557 2 Chain $1030 FEEDRBKITS Axial Flow models pre /8 Feed Roller Band Kit to fill recesses on $120 FEEDRBKIT2 Axial Flow models 1993 on 3 1 / 2 Feed Roller to allow for 3 Chain conversion $120 Caterpillar (1420 to 2388 models) FCAT-480L Lexion left side CA624 2 Chain 108 links Heavy Duty U Slat $970 FCAT-480R Lexion right side CA624 2 Chain 108 links Heavy Duty U Slat $970 FCAT-470 Lexion 470 CA624 3 Chain 108 links Heavy Duty U Slat $1400 Claas FCL Claas 203,204 CA624 3 Chain 108 links Heavy Duty U Slat $1350 FCAT750-4 Claas 750 CA624 4 Chain 107 links Heavy Duty Slat $2100 FCAT770-4 Claas 770 CA624 4 Chain 107 links Heavy Duty Slat $2100 Available All Other Claas Models On Request John Deere FJD Titan 2 CA550 3 Chain Heavy Duty U Slat $1000 FJD Titan 2 CA557 3 Chain Heavy Duty U Slat $1130 FJD Titan 2 CA557 4 Chain Heavy Duty U Slat $1650 FJD CTS CTSII CA557 3 Chain 26 Slats 101 links $ CTS Heavy Duty U Slat FJD CA557 4 Chain Heavy Duty U Slat $ CWS 9660CWS FJD STS 9750STS CA557 3 Chain 30 Slats 90 links Heavy Duty U Slat $1300 FJD STS 9760STS 9860STS CA557 3 Chain 30 Slats 87 links Heavy Duty U Slat $1300 FJD-S STS 9770STS 9870STS CA557 3 Chain Heavy Duty Cast Slat Centres $1800 S660 S670 S680 S690 FJD-S670CH 9670STS 9770STS 9870STS CA557 3 Chain Set of Chains Only $1400 S660 S670 S680 S690 FJD CA624 3 Chain T Slat $1450 Massey Ferguson FMF XP 9690 CA557 3 Chain Heavy Duty U Slat $1500 FMF CA557 3 Chain Heavy Duty U Slat $1600 New Holland FNH TR70 TR CA557 3 Chain 15¼ Centre to Centre sprockets $1230 FNH-95-7 TR95 TR96 prior serial CA557 3 Chain 21 1 /8 Centre to Centre sprockets $1125 FNH-87-1 TR85 TR86 TR87 TR88 TR89 CA557 3 Chain 17 1 /8 Centre to Centre sprockets, 93 links $1285 TR96 TR97 TR98 TR99 Heavy Duty U Slats FNH-CX860 CX840 CX860 CX880 CX8060 CA557 4 Chain Heavy Duty U Slats $2000 CX8070 CX8080 CX8090 FNH-CR960 CR920 CR940 CR960 CR6090 CA557 3 Chain Heavy Duty U Slats, 111 links $1570 CR7090 CR8080 CR9060 FNH-CR970 CR970 CR980 CR9070 CR9080 CA557 3 Chain Heavy Duty U Slats $1730 FNH-CR CR8090 CR9070 CR9080 CR9090 CA557 4 Chain Heavy Duty Slats $2150 FNH CA557 3 Chain $1250 FNH-TX66 TX66 Early TX66 Standard CA557 3 Chain Heavy Duty Angle Slats $1650 FNH-TX64-7 TX64 TX65 CA557 3 Chain Advise if 20¼ or 22¼ centres $ Prices exclude GST

39 Sprockets for Feeder Chains Order No. of Shaft No. Model Application Teeth Size Original Part Price Agco/Allis FM-150 N & R Series Feeder & Separator 13 1-½ Hex $140 FM-154 R42 R52 R62 R ¾ Hex $140 FM-155 R65 R66 R75 R76 MF Hex $180 Case-IH FM , 9 1½ Hex C1 $ FM-91 As previous item In Split Form 9 1½ Hex C1 $195 SPT-1680 Sprocket Tube for 3 Chain Feeder Chain 1½ Hex C2 $850 Suits (sprockets flush with ends) SPT-2577 Sprocket Tube for 3 Chain Feeder Chain 1½ Hex $850 Suits 2388 above S/N HAJ (sprockets inset from each end 50mm) SPT-8010 Sprocket Tube for 2x2 Chain Feeder Chain $1200 Suits afx Ctr to Ctr on Sprockets SPT-4906 Sprocket Tube for 4 Chain Feeder Chain with 14 15½ 14 Sprocket centres $2300 Suits No Rocktrap SPT-4915 Sprocket Tube for 4 Chain Feeder Chain with 12 15½ 12 Sprocket centres $2300 Suits With Rocktrap SPT-1680SK Stripper Kit suits 80 Series 3 Chain $180 SPT-1660SK Stripper Kit suits 60 Series 3 Chain $180 John Deere FM CTS 10 1¾ Hex H $95 FM-112 As previous item in Split Form 10 1¾ Hex H $150 FM-113 CTSII Outside 10 2¼ Round H $60 FM-114 CTSII Centre 10 2¼ Round H $75 FM STS 9750 STS 9670 to S/N ¼ Round H $ STS 9760STS 9860STS Outside FM STS 9750 STS 13 2¼ Round H $ STS 9760STS 9860STS Centre FM STS 9770STS 9870STS, 13 2¼ Round H $160 S660 S670 S680 S690 FM Outside 14 40mm Round Z11544 $105 FM Centre 14 40mm Round Z11545 $80 New Holland FM-12 TR70 early TR85 Outside 12 1¾ Round $120 FM-120 TR70 early TR85 Centre 12 1¾ Round $120 FM-121H TR85 TR86 TR87 TR88 TR89 TR95 TR96, 12 1¾ Hex $175 TR97 TR98 TR99 CR940 CR960 CR970 CR980 CR9060 CR9070 Outside FM-122H TR85 TR86 TR87 TR88 TR89 TR95 TR96, 12 1¾ Hex $175 TR97 TR98 TR99 CR940 CR960 CR970, (Early CR9040 CR9060 CR9070) Centre FM TX34 TX66 TX mm Round $100 FM TX34 TX66 TX68 Centre 10 50mm Round $ Prices exclude GST 39

40 Hi-Tooth Slats Positive Grabbing Of Crop Material For greatly improved feeding in those thin or difficult to feed crops. Tried and proven on Case-IH. Patent Applies Order No. Model Application Chain Number Description Price Type of Chains FIHC HT CA557 3 Feeder Chain fitted with Hi-Tooth Slats $ FIHC HT CA557 3 Feeder Chain fitted with Hi-Tooth Slats $1260 FIHC HT CA557 3 Feeder Chain fitted with Hi-Tooth Slats $1310 Slat Inserts And Slats For Original Chains Order No. Model Application Chain Number Description Price Type of Chains SN12HT , 2 Slat Insert add to Original Slat on 2 Chain versions $50 ea SN12HT Slat Insert add to Original Slat on 2 Chain versions $54 ea SN10HT880E Slat replaces Original Slat on 3 chain versions $54 ea Grain Elevator Chains All paddles are top quality new insertion rubber Tough and Hard wearing. Paddles are bolted to High Quality Italian chain. Sprockets We stock high quality sprockets to suit nearly all the Feeder Chains and Grain Elevator Chains we sell. Some feeder house sprockets available in split form for ease of replacement. 40 Prices exclude GST

41 Grain Elevator Chains CLEAN GRAIN RETURN GRAIN Order No. Model Application Chain Type Price Order No. Chain Type Price Agco/Allis GGL-N (34 Paddles) N5 up to 6100, N6 up to 7300, N7 CA550 $590 RGL-N (17 Paddles) CA550 $360 GGL-R40 (34 Paddles) R40, R50 CA550 $590 RGL-4252 (30 Paddles) CA550 $565 GGL-R60 (35 Paddles) R60, R70 (N5 above 6101, N6 above 7301) CA550 $615 RGL-N-27 (27 Paddles) CA550 $540 GGL-R62 (36 Paddles) R62 after 63001, R72 after CA550 $695 RGL-4252 (30 Paddles) CA550 $565 R42 after 43001, R52 after GGL-R62-7 (36 Paddles) R62 after 63001, R72 after CA557 $800 RGL-4252A (37 Paddles) CA550 $675 R42 after 43001, R52 after Case-IH GIHC , 1620 CA550 $665 RIHC-1460 CA550 $490 GIHC , 1460 CA550 $665 RIHC-1460 CA550 $490 GIHC , 1660, 1644, 1666, 2144 CA557 $800 RIHC CA557 $ , 2344, 2366 GIHC , 1680, 1688 CA550 $665 RIHC-1460 CA550 $490 GIHC , 1680, 1688, 2188, 2388, 2588, 6088, 7088 CA557 $825 RIHC CA557 $615 GIHC , 7120, 8010, 8120, 9120 CA557 $ Caterpillar GCAT , CA624 $770 RCAT460 CA624 $580 John Deere GJD , 7720, 6620T2 CA550 $500 RJD CA550 $435 GJD , 8820T2, 7720T2 CA550 $445 RJD CA550 $435 GJD , 9500, 9510, CTS, CTS II CA550 $575 RJD9400 CA550 $485 GJD , 9610 CA550 $575 RJD9400 CA550 $485 GJD STS, 9750STS, 9660STS, 9760STS, 9860STS, CA557 $690 RJD CA557 $460 (Paddle Size 87/8 x 4¾ ) Original Part AXE28559 GJD STS, 9770STS, 9870STS CA557 $690 RJD CA557 $460 S660, S670, S680, S690. (Paddle Size 8¾ x 45/8 ) Original Part AXE28560 Massey Ferguson GMF , 850, 760, 860 CA550 $695 RMF-750 CA550 $385 GW , 8780 (Paddle Size 240MM x 80mm) CA550 $ GMF , 9690, 9790 (Paddle Size 230mm x 105mm) CA557 $720 RMF-9790 CA557 $615 GW , 9720 (Paddle Size 255mm x 90mm) CA550 $720 RMF-9790 CA557 $615 New Holland GNH-70-1 TR70, TR85, TR86, TR87, TR88, CA550 $365 RNH-70-4 CA550 $435 GNH TR70, TR85, TR86, TR87, TR88 CA557 $450 RNH CA557 $585 GNH TR95, TR96, TR97, TR98, TR89 CA557 $510 RNH CA557 $585 GNH-99-7 TR99 CA557 $510 RNH CA557 $585 GNH , 8070, 8080 CA550 $390 RNH-8060 CA550 $310 GNH , 8070, 8080 CA557 $455 RNH CA557 $410 GNH-TX34 TX34, TX64 CA550 $ GNH-TX66 TX66 CA557 $ GNH-CR960-7 CR920, CR940, CR960, CR970, CR9070, CA557 $ CR9080, CR9090, CX840, CX860, CX880, CX8080 CA557 is Heavy Duty Prices exclude GST 41

42 Sprockets for Grain Elevator Chains IMPORTANT NOTE: Before installing one or more sprockets, do a visual inspection on the used sprockets you plan to run together with a new sprocket. If you notice a substantial wear factor in any, then it is important to replace all the sprockets. Order No. Model Application Original Number Shaft Size Price Part No. of Teeth Agco/Allis Clean Grain Elevator Upper SP099 N5 N6 N7 R60 R Tooth 1 ¼ Bore $88 SP095 R40 R Tooth 1 Bore $65 SP098 R42 R52 R62 R72 S67 S68 S77 S78 S88 No Hub Tooth NA $95 Clean Grain Elevator Lower SP097 R40 R50 R60 R Tooth 1 ¼ Bore $60 SP098 R42 R52 R62 R72 S67 S68 S77 S78 S88 No Hub Tooth NA $95 SP106 N5 N6 N7 before Series Tooth 1 ¼ Bore $75 SP105 N7 to S/N Tooth 1 Bore $70 Return Grain Elevator Upper SP101 N5 N6 N7 R60 above S/No Tooth 1 Bore $50 SP095 R40 R50 R60 R Tooth 1 Bore $65 SP098 R42 R52 R62 R72 S67 S68 S77 S78 S88 No Hub Tooth NA $95 Return Grain Elevator Lower SP095 N5 N6 N7 R40 R50 R60 R Tooth 1 Bore $65 SP098 R42 R52 R62 R72 S67 S68 S77 S78 S88 No Hub Tooth NA $95 Case-IH Clean Grain Elevator Upper SP C1 7 Tooth 1 Bore $90 SP to S/N to S/N C1 6 Tooth 1 Bore $90 SP above S/N S/N C1 7 Tooth 1 1 /8 Bore $115 SP C1 9 Tooth 1 ¼ Bore $ SP Tooth 35mm Bore $105 Clean Grain Elevator Lower SP to S/N to S/N C1 6 Tooth 1 Bore $90 SP above S/N above S/N C1 7 Tooth 1 Bore $90 SP above S/N above S/N C1 7 Tooth 1 1 /8 Bore $115 SP above S/N above S/N C1 7 Tooth 1 ¼ Bore $ above S/N SP C1 9 Tooth 1 ¼ Bore $125 SP A1 9 Tooth 1 3 /8 Bore $60 SP Tooth 45mm Bore $100 Return Grain Elevator Upper SP to S/N to S/N 10000, C1 6 Tooth 1 Bore $ to S/N SP above S/N above S/N C1 7 Tooth 1 Bore $ Return Grain Elevator Lower SP to S/N to S/N C1 6 Tooth 1 Bore $90 SP above S/N above S/N 12001, C1 7 Tooth 1 Bore $ SP above S/N C1 7 Tooth 1 1 /8 Bore $115 SP A1 7 Tooth 1 ¼ Bore $90 John Deere Clean Grain Elevator Upper SP T T to S/N H Tooth 1 Bore $50 SP above S/N T2 H Tooth 1 ¼ Bore $60 SP CTS CTSII H Tooth 30mm Bore $70 SP STS 9750STS 9660STS 9760STS 9860STS H Tooth 30mm Bore $60 SP STS 9870STS S660 S670 S680 S690 H Tooth 35mm Bore $75 42 Prices exclude GST

43 Sprockets for Grain Elevator Chains Order No. Model Application Original Number Shaft Size Price Part No. of Teeth John Deere continued Clean Grain Elevator Lower SP , 975 to S/N Z Tooth 25mm Bore $100 SP above S/N , 1065, 1075 to S/N , 1051 Z Tooth 30mm Bore $90 SP T2, 7720, 7720T2, 8820, 8820T2 H Tooth 1 ¼ Bore $60 SP , 9410, 9500, 9510, 9600, 9610, CTS, CTS II, H Tooth 35mm Bore $ STS, 9750STS, 9660STS, 9760STS, 9670STS, 9770STS, 9860STS, 9870STS SP STS, 9870STS, S660, S670, S680, S690 H Tooth 45mm Bore $70 Return Grain Elevator Upper SP to S/N H Tooth 1 Bore $70 SP above S/N , 7720T2, 8820, 8820T2 H Tooth 1 Bore $50 SP , 9500, 9600, 9610, CTS, CTS II H Tooth 1 Hex $50 SP STS, 9750STS, 9660STS, 9760STS, 9860STS H Tooth 30mm Bore $ STS, 9770STS, 9870STS, S670, S680 Return Grain Elevator Lower SP T2 H Tooth 1 Bore $70 SP above S/N , 8820, 8820T2 H Tooth 1 Bore $50 SP to S/N , 7720T2 H Tooth 1 ¼ Bore $60 SP , 9500, 9600, 9610, CTS, CTS II, 9650CTS H Tooth 1 Hex $50 SP STS, 9750STS, 9660STS, 9760STS, 9860STS H Tooth 35mm Bore $ STS, 9870STS, S660, S670, S680, S690 New Holland Clean Grain Elevator Upper SP134 TR86, TR87, TR Tooth 1 Bore $115 SP135 TR96, TR97, TR Tooth 1 1 /8 Bore $60 SP138 TR89, TR97, TR98, TR Tooth 1 3 /8 Bore $150 SP195 CR940, CR960, CR970, CR8090, CR Tooth 35mm Bore $115 CR9090, CX880, CX8080, CX8090 SP , 8080, TX34, TX64, TX Tooth 30mm Bore $80 Clean Grain Elevator Lower SP134 TR85, TR86, TR87, TR Tooth 1 Bore $115 SP135 TR85, TR86, TR Tooth 1 1 /8 Bore $60 SP138 TR87, TR88, TR89, TR96, TR97, TR98, TR Tooth 1 3 /8 Bore $150 SP195 CR920, CR940, CR960, CR970, CR8090, CR Tooth 35mm Bore $115 CR9090, CX860, CX880, CX8070, CX8080, CX8090 SP , 8060, 8070, 8080, TX34, TX64, TX Tooth 30mm Bore $80 Return Grain Elevator Upper SP134 TR86, TR87, TR88, TR89, TR95, TR96, TR97, TR98, TR Tooth 1 Bore $115 SP , 8070, Tooth 30mm Bore $80 Return Grain Elevator Lower SP134 TR85, TR86, TR Tooth 1 Bore $115 SP135 TR95, TR96, TR Tooth 1 1 /8 Bore $60 SP138 TR88, TR89, TR98, TR Tooth 1 3 /8 Bore $150 SP , 8070, Tooth 30mm Bore $80 Chain Spare Parts Order No. Chain Type Description Price L-5 CA550 Straight Connector $7 L-50 CA550 Offset Connector $8 L-7 CA557 Straight Connector $9 L-70 CA557 Offset Connector $10 L-71 CA557 K39 Connector 2 Hole Centres $14 L-72 CA557 K38 Connector 2¼ Hole Centres $14 L-7B CA557 Straight Connector Bolt/Nut Type $18 L-70B CA557 Offset Connector Bolt/Nut Type $22 AN-83 S52 Straight Connector $7 AN-84 S52 Offset Connector $8 AN-86 CA624 Straight Connector $7 AN-87 CA624 Offset Connector $ Prices exclude GST 43

44 Header Knives 30-50ft Solid Backbone Made from the same American material as Original Knives, Huge Cost Savings, Backbone Only OR Full Knives with sections attached. Order No. Model Application & Description Price Agco hkag36 36ft Knife including 12ft Reinforcing Strap at Drive End (Single Drive) $1250 SKBAG Knifeback only with Holes suits Agco Belt Front (No Knife Sections) ¼ holes, 2 1 / 16 hole centres $15 per ft SKBJS-AG Joining Strap with Bolts and Nuts $38 Case-IH HKCNH35 35ft Knife including 12ft Reinforcing Strap at Drive End Case-IH (Single Drive) $1195 HKCNH41 41ft Knife suits Double Knife Drive System includes left side, right side and centre overlap Case-IH $1265 HKCNH40 40ft Knife suits Centre Double Drive includes left and right hand side $1250 Macdon also sold as Case-IH or New Holland HKMD30 30ft Knife (Single Drive) $995 HKMD30DD 30ft Knife suits Double Knife Drive System includes left side, right side and centre overlap $1060 HKMD35 35ft Knife including 12ft Reinforcing Strap at Drive End $1320 hkmd36 36ft Knife including 12ft Reinforcing Strap at Drive End $1350 hkmd39 39ft Knife including 12ft Reinforcing Strap at Drive End (Single Drive) $1450 hkmd40dd 40ft Knife suits Double Knife Drive System includes left side, right side and centre overlap $1400 HKMD45DD 45ft Knife suits Double Knife Drive System includes left side, right side and centre overlap $1565 skbmd Knifeback only with holes suits Case-IH/Macdon Belt Fronts 2 1 / 8 hole centres $15 per ft SKB216 Knifeback only with holes suits Case-IH rigid fronts 2 1 / 16 hole centres $15 per ft SKBJS-MD Joining Strap with Bolts and Nuts $38 Honeybee also sold as New Holland hkhb30 30ft Knife (Single Drive) $995 HKHB30DD 30ft Knife suits Double Knife Drive System includes left side, right side and centre overlap $1160 HKHB30DDSCH 30ft Knife suits Double Drive and SCH Knife Guards, includes left side, right side and centre overlap $1195 hkhb36 36ft Knife including 12ft Reinforcing Strap at Drive End (Single Drive) $1340 HKHB36SCH 36ft Knife suits SCH Knife Guards (Single Drive) $1370 hkhb36dd 36ft Knife suits Double Knife Drive System includes left side, right side and centre overlap $1370 HKHB36DDSCH 36ft Knife suits Double Drive and SCH Knife Guards, includes left side, right side and centre overlap $1400 hkhb39 39ft Knife including 12ft Reinforcing Strap at Drive End (Single Drive) $1440 HKHB39DD 39ft Knife suits Double Knife Drive System includes left side, right side and centre overlap $1470 HKHB40DD 40ft Knife suits Double Knife Drive System includes left side, right side and centre overlap $1500 HKH40DDSCH 40ft Knife suits Double Drive and SCH Kife Guards, includes left side, right side and centre overlap $1530 hkhb42dd 42ft Knife suits Double Knife Drive System includes left side, right side and centre overlap $1570 HKHB42DDSCH 42ft Knife suits Double Drive and SCH Knife Guards, includes left side, right side and centre overlap $1600 HKHB45DD 45ft Knife suits Double Knife Drive System, includes left side, right side and centre overlap $1660 HKHB45DDSCH 45ft Knife suits Double Drive and SCH Knife Guards, includes left side, right side and centre overlap $1690 skbhb Knifeback only with holes suits Honeybee/New Holland Belt Fronts $15 per ft skbjs-hb Joining Strap with Bolts and Nuts $38 44 Prices exclude GST

45 Header Knives 30-50ft Order No. Model Application & Description Price John Deere with 4 Dura-Twin Sections HKJD30 30ft Knife (Single Drive) $1160 HKJD35 35ft Knife including 12ft Reinforcing Strap at Drive End (Single Drive) $1335 HKJD35DD 35ft Knife suits Double Drive System, includes left side, right side and centre overlap $1370 HKJD36 36ft Knife including 12ft Reinforcing Strap at Drive End (Single Drive) $1375 HKJD40DD 40ft Knife suits Double Knife Drive System, includes left side, right side and centre overlap $1545 HKJD45DD 45ft KNife suits Double Knife Drive System, includes left side, right side and centre overlap $1690 skbjd Knifeback only with holes suits John Deere Belt Fronts 1 hole centres $15 per ft skbjs-jd Joining Strap with Bolts and Nuts 1 Hole centres for 4 Dura-Twin Sections $38 Midwest Fitted with 3 Single ft SCH (Honeybee) Sections HKMW40DD 3 40ft Knife suits Double Knife Drive System (includes left side, right side and centre overlap) $1500 HKMW42DD 3 42ft Knife suits Double Knife Drive System, includes left side, right side and centre overlap $1570 HKMW45DD 3 45ft Knife suits Double Knife Drive System, includes left side, right side and centre overlap $1660 HKMW50DD 3 50ft Knife suits Double Knife Drive System, includes left side, right side and centre overlap $1820 Midwest Fitted with 4 wide double cut John Deere knife sections HKMW40DD 4 40ft Knife suits Double Knife Drive System, includes left side, right side and centre overlap $1545 HKMW42DD 4 42ft Knife suits Double Knife Drive System, includes left side, right side and centre overlap $1610 HKMW45DD 4 45ft Knife suits Double Knife Drive System, includes left side, right side and centre overlap $1690 HKMW50DD 4 50ft Knife suits Double Knife Drive System, includes left side, right side and centre overlap $1835 SKBHB Knifeback only with holes suits Midwest Belt Fronts with SCH knife sections $15 per ft SKBJS-HB Joining Strap with Bolt & Nut suits Midwest with SCH knife sections $38 SKBJD Knifeback only with holes suits Midwest with John Deere knife sections 1 hole centres $15 per ft SKBJS-JD Joining Strap with Bolt & Nut suits Midwest with John Deere knife sections $38 New Holland HKCNH35 35ft Knife including 12ft Reinforcing Strap at Drive End (Single Drive) -760CG $1195 HKCNH41 41ft Knife suits Double Drive System includes left side, right side and centre overlap - 760CG $1265 HKCNH40 40ft Knife suits Centre Double Drive System includes left side and right side - 840CD 880CF $1250 Reinforcing Straps Strap is 3mm ( 1 /8 ) thick stainless steel and utilises existing bolts. Retro fit is easy. No need to change hold down clips. agss Reinforcing Strap suits Agco 6ft Section $85 Eliminate almost 100% of knife breakages. Fit to first 12ft at knife drive end. mdss Reinforcing Strap suits CaseIH/Macdon 6ft Section $85 HBss Reinforcing Strap suits Honeybee/New Holland 6ft Section $85 JDss Reinforcing Strap suits John Deere 6ft Section $100 Knifeheads NOT included with Knives - See Page Prices exclude GST 45

46 Header Knives - Rigid Fronts To 30ft Considerable Cost Saving. Quick & Easy repair in the Paddock. (no welding required) Fitted with Long-Life Large or Fine Chrome Serrated Knife Sections Easily freighted overnight or will fit into a car or ute. Packs into 2 metres (6ft) Order No. Order No. Model Application & Description Price Price Single Point Double Cut Width Single Point Double Cut Agco/Allis LHKAC2S LHKAC2D Knife with Knife Sections Agco/Allis 24ft $685 LHKAC3S Knife with Knife Sections Agco/Allis 30ft $840 Case-IH lhkih2s lhkih2d Knife with Knife Sections International ft 6 $660 $810 lhkih3s lhkih3d Knife with Knife Sections International ft $685 $830 lhkih4s lhkih4d Knife with Knife Sections International ft $840 $1015 lhkcih2s lhkcih2d Knife with Knife Sections Case-IH ft $695 $860 lhkcih3s lhkcih3d Knife with Knife Sections Case-IH ft $840 $1015 LHKNH6S LHKNH6D Knife with Knife Sections Case-IH Double Drive 30ft $995 $1190 John Deere LhKJD2S LhKJD2d Knife with Knife Sections John Deere ft $655 $800 LhKJD3S LhKJD3d Knife with Knife Sections John Deere ft $685 $830 LhKJD4S LhKJD4d Knife with Knife Sections John Deere ft $695 $860 LhKJD5S LhKJD5d Knife with Knife Sections John Deere ft $840 $1015 Massey Ferguson LhKMF2S LhKMF2d Knife with Knife Sections Massey Ferguson 24ft $685 $830 LhKMF3S LhKMF3d Knife with Knife Sections Massey Ferguson 30ft $840 $1010 New Holland LhKNH2S LhKNH2d Knife with Knife Sections New Holland ft $655 $800 LhKNH3S LhKNH3d Knife with Knife Sections New Holland ft $695 $860 LhKNH4S LhKNH4d Knife with Knife Sections New Holland 806 Double Drive 26ft $865 $1065 LhKNH5S LhKNH5d Knife with Knife Sections New Holland 806 Double Drive 30ft $995 $1190 LhKNH6S LhKNH6d Knife with Knife Sections New Holland C 73C Double Drive 30ft $995 $1190 Knifeheads Available Optional See Page 50 Knives for Claas, Deutz & Laverda are available Order No. Spare Parts Price LKBPCE Laminated Knifeback only. Use 2 to form a two metre length (Fits all makes) Square/Rectangular Holes (Used on 1997 and prior knives) $32 each piece LKBPCE-1 Round/Oblong Holes (Used on 1998 and later knives) $32 each piece 46 Prices exclude GST

47 Knives Hay Cutting and Swathers Order No. Model Application Width Price Case-Ih HAYNH2 Case-IH ft $400 CNHKNIFE30 Case-IH Swather Knife 30ft $840 Other Case-IH Hay Equipment Knives Quickly Made to Order Hesston HAYHS1 Hesston Hay Knife 10ft $335 HAYHS2 Hesston Hay Knife 14ft $435 HAYHS4 Hesston Hay Knife 25ft $695 New Holland HAYNH1 New Holland 469, 489 Hay Knife 9ft $300 HAYNH2 New Holland (Single Knife Drive) 495 Hay Knife 12ft $400 HAYNH3 New Holland (Double Knife Drive) 499 Hay Knife 12ft $555 HAYNH4 New Holland (Double Knife Drive) 114 Hay Knife 14ft $605 HAYNH5 New Holland (Double Knife Drive) 2300 Hay Knife 16ft $665 HAYNH6 New Holland (Double Knife Drive) 2328 Hay Knife 18ft $715 CNHKNIFE 30 New Holland Swather Knife 30ft $840 Macdon MACKNIFE 25 Macdon Swather Knife 25ft $695 MACKNIFE 30 Macdon Swather Knife 30ft $840 Versatile VERKNIFE20 Versatile Swather Knife 20ft $590 VERKNIFE24 Versatile Swather Knife 24ft $695 VERKNIFE28 Versatile Swather Knife 28ft $795 Fine Top Serrated Knife Sections for Swathing or Fine Grasses Large Top Serrated Knife Sections for Cereal Hay Fine Under Serrated Knife Sections for Swathing of Fine Grasses Knifeheads available - optional - See Page 50 Case-IH Rotor Auger Conversion Improves feeding into rotor and takes away feeder house rumble. Easy installation bolts to existing Rotor with no welding or cutting. Unit comes balanced with only minimal static rotor rebalancing required. Flighting is 13mm (1/2 inch) thick material. Order No. Model Application Item Price ROT-AFX Series to 2366 Axceller Kit $2600 ROT-AFX Series 1480 to 2388 Axceller Kit $ Prices exclude GST 47

48 Knife Sections Order No. s Model Application Coarse Fine Fine Coarse Fine Fine Serrated Serrated Serrated Serrated Serrated Serrated Single Single Double Single Single Double Point Point Cut Point Point Cut Agco/Allis KSSPAC KSSPACF Agco/Allis L, N & R Series Rigid Fronts $3 $3 - KSSPACBF Agco Belt Front 21/16 Centres (Some have MF Fronts and need 2 Centres) - $3 - Claas KSSPCL KSSPCLF KSDCCL Claas $3 $3 $4 Honeybee KSSPHB KSSPHBF KSDCHB Honeybee and New Holland Belt Fronts $3 $3 $4.75 KSSPHBM Honeybee and New Holland Belt Fronts SCH Original Sections $ KSSPHBCS Knife Section suits centre overlap with 2 Torx Screws and Nuts $ Case-Ih KSSPIH KSSPIHF KSDCIH International 810 Front $3 $3 $4.75 KSSPCNH KSSPCNHF KSDCCNHF Case-IH Fronts, Mower Conditioners, Swathers $3 $3 $4.75 KSUSCNH Case-IH Mower Conditioner & Swathers - Underserrated $3 KSSPMAC KSSPMACF Macdon Belt Fronts sold by Case-IH $3 $3 - KSSPCIH KSSPCIHF Case-IH 3050 Rigid Fronts, Draper Fronts $3 $3 - John Deere KSSPJDNH KSSPJDNHF KSDCCNHF John Deere 200 and 900 rigid series Fronts $3 $3 $4.75 KSDCJDA John Deere Draper Fronts 4 wide Double Cut Fine - - $5 KSDCJDB John Deere Draper Fronts 4 wide Double Cut Coarse - - $5 KSDCJDAB 4 Wide Double Cut Fine Countersunk Underneath - - $8 KSDCJDACS 4 Wide Double Cut Fine Countersunk Top - - $8 Macdon KSSPMAC KSSPMACF Macdon Belt Fronts, Macdon Swathers $3 $3 - KSUSMAC Macdon Swathers - Underserrated $3 KSSPMACLH Left Hand 1 /2 section - fits nearly all models - - $3 KSSPMACRH Right Hand 1 /2 section - fits nearly all models - - $3 KSSPMACCSC KSSPMACCSF With Countersunk Holes for Centre Overlap (Specify Top or Bottom) $5 $5 - KSSPMACWS Centre Overlap Wear Strip - $10 - Massey Ferguson KSSPMF KSSPMFF KSDCMF Massey Ferguson Rigid and some Draper Fronts - 2 Centres $3 $3 $4.75 Midwest KSSPHB KSSPHBF Midwest Draper Fronts $3 $3 - KSSPHBM SCH original Knife Sections Medium Serrations $ New Holland KSSPCNH KSSPCNHF KSDCCNHF New Holland C 72C and 73C $3 $3 $4.75 New Holland, Hesston, Case-IH Mower Conditioners and Case-IH Swathers KSSPJDNH KSSPJDNHF KSDCCNHF New Holland 705 and 806 Series Fronts $3 $3 $4.75 KSSPCIH KSSPCIHF New Holland 760CG Rigid Fronts, 840CD 840CF Draper Fronts $3 $3 - Versatile KSSPVER Versatile Swathers - $3 - Comb Front Machines KSCF KSDCCF Comb Front Machines IH, MF & NH - $4.50 $5.50 End Sections KSSPLHEND Left Hand 1 1 /2 Section fits nearly all models - - $11 KSSPRHEND Right Hand 1 1 /2 Section fits nearly all models - - $11 KSSPCIHT Section for centre overlap 740CF Front - $12 - NEW NEW 48 Prices exclude GST

49 Knife Sections Fixings & Accessories High tensile bolts with high tensile locking wizz nuts Zinc Plated Price INCLUDES nut Order No. Versatile Swather - BOLTS & NUTS Order No. KSBNNHCTR Rivets Open Front KSOFRIVT 5.2 x 15mm Suits Open Front $13 per 100 knife sections KSOFHDR3 5.2 x 32mm Suits Open Front knifehead 24 each KSOFRICL 6 x 18mm Suits Claas late models $15 per 100 KSOFRICL2 6 x 30mm Head Rivets suits Claas 30 each Order No. Knife Guard Bolts & Nuts Order Order Length No. 3/8 Price No. 7/16 Price 1 KGBN25mm $1 KGBN25M1 $1.30 1¼ KGBN32mm $1 KGBN32M1 $1.30 1½ KGBN38mm $1.10 KGBN38M1 $1.40 1¾ KGBN45mm $1.35 KGBN45M1 $2 2 KGBN50mm $1.50 KGBN50M1 $1.85 2½ KGBN64mm $1.75 KGBN64M1 $ /8 Wizz Nut KGNUT /16 Wizz Nut KGNUT Rivets Comb Front Suits 2 Single Point Sections Order No. Price KSBNVER16 5 /8 (16mm) 85 ea KSBNVER25 1 (25mm) $1 ea New Holland and Macdon Centre Overlap Bolt and Nut Price 80 ea Price Price KSCFRIVT 13mm x 4.7mm for MF & NH $7 per 100 KSCFRIVS 9mm x 4.7mm for International $7 per 100 Suits Double Cut Sections KSCFRIV1 11mm x 5.2mm $10 per 100 KSCFRIV2 12mm x 5.2mm $10 per 100 Head Rivet Double Cut Sections KSCFHD16 16mm x 5.2mm $4 per 25 KSCFHD18 18mm x 5.2mm $4 per 25 Knife Guard Shims Order No. Price SHIM-1 Knife Guard Shim 1mm thick $1.40 ea SHIM-2 Knife Guard Shim 2mm thick $1.50 ea SHIM-3 Knife Guard Shim 3mm thick $1.60 ea Nut Inserts Price includes nut Order No. Price mm Nut Insert Suit Overlap $1.50 ea mm Nut Insert Suit Knifehead $1.50 ea Order No. Cuphead Knife Section Bolts & Nuts Suits Laminated Knife 1997 and earlier Tension INCH Pounds Order No. Splined Knife Section Bolts & Nuts Suits Nearly all older Rigid Fronts and Macdon and Case-IH Draper Fronts Price includes nut Price KSBNSP16 For attachment of knife section 5 /8 (16mm) 50 ea KSBNSP25 For attachment of knifehead 1 (25mm) 55 ea KSBNSP32 For attachment of knifehead 1¼ (32mm) 75 ea KSNUT Suits above 3 items 25 ea KSBNSP16-14 ¼ Diameter suits Agco 5 /8 (16mm) 65 ea Agco Bolts & Nuts Suits Agco Belt Fronts John Deere Draper Front Bolts & Nuts Price includes nut Order No. Price KSBNSP16-14 ¼ Diameter 5 /8 (16mm) 65 ea KSBNHX32 ¼ Diameter 1¼ (32mm) $1.20 ea Price includes nut Order No. Price KSBNJD16 For attachment of knife section 5 /8 (16mm) 65 ea KSBNJD25 For attachment of knifehead & joiner strip 1 (25mm) $1 ea KSCN6 Lock nut suits reinforcing strip 20 ea KSFNM6 M6 Flange Nut 20 ea KSBNJDHX Allen Key Screw & Nut suits overlap $1.00 ea Suits Honeybee, New Holland & Midwest Belt Fronts 6mm diameter Order No. Honeybee & Midwest Bolts & Nuts Price includes nut Price KSBNHB16 For attachment of knife section (16mm) 90 ea KSBNHB32 For attachment of knife head (32mm) $1.00 ea KSCN6 Lock nut suits reinforcing strip 20 ea KSFNM6 M6 Flange Nut 20 ea KSBNHBT20 T20 Torx Screw & Nut suits Overlap - Honeybee $1 ea KSBNMW16 M6 Cap Screw suits Overlap - Midwest $1 ea Price includes nut Price KSBNCH16 For attachment of knife section 5 /8 (16mm) 50 ea KSBNCH25 For attachment of knifehead 1 (25mm) 60 ea KSBNCH32 For attachment of knifehead 1¼ (32mm) 75 ea Prices exclude GST 49

50 Knifeheads Hay and Harvest Order No. Description Price Order No. Description Price Agco/Allis Macdon LKHAC N Series 1 & 2 Left Side & L2 L3 $90 LKHACN3 N Series 3 prior S/N $300 bearing included LKHACR Late N & R Models No bearing needed $185 Original Part: Case-IH LKHMAC Macdon & 36 $250 & Case-IH Fronts Original Part LKHMAC1 Macdon 972 CaseIH 1052 $270 Original Part LKHMAC5L Macdon D60 5º Tilt Left Hand $270 LKH complete with block $325 Replaces C95 LKH297B Block Only $175 LKHMAC5R Macdon D60 5º Tilt Right Hand $270 LKHMAC83 Macdon D60 New Holland 83C $245 LKHNH $240 LKHC-IH 810 Series Fronts $220 bearing included LKHBRG1 Bearing Only $60 ea Suits International 810 Front Allis N Series LKHHS ft Mower Conditioner $220 LKHPIN1 Pin, Bearing and Seal $100 suits Macdon D LKHBRG2 Bearing suits Macdon Knifehead $45 Hesston LKHHS $220 Honeybee and New Holland Belt Front Honeybee or New Holland - Left Hand $300 with SCH Guards Original Part: HB Honeybee or New Holland - Right Hand $300 with SCH Guards Original Part: HB Knifehead Left Hand - $300 Honeybee/New Holland with Crary/Harvestaire 7228 Guards (No Choke) Knifehead Right Hand - $300 Honeybee/New Holland with Crary/Harvestaire 7228 Guards (No Choke) Nylon Ring $15 Suits knifehead John Deere LKHJD 200 Series 900 Series Rigid Fronts $260 Heavy Duty Version Original Part: AH89498 LKHJD600D 600 Series Belt Front Left and Right Original Part: AH $270 LKHJD900D 900 Series Belt Front $250 AH AH AH Massey Ferguson LKHMF head $170 with bearing not including strap LKHMFS to 24ft head $300 with bearing and strap included LKHMF to 30ft head $300 with bearing and strap included LKHSEAL1 Seal suits Macdon Knifehead $8 Mid West MWKHLH3 Knifehead Left Hand $360 Suit 3 Single Pt Knife Sections MWKHRH3 Knifehead Right Hand $360 Suit 3 Single Pt Knife Sections MWKHLH4 Knifehead Left Hand $360 Suit 4 Doublecut Knife Sections MWKHRH4 Knifehead Right Hand $360 Suit 4 Doublecut Knife Sections New Holland LKHNHTR Front 22ft & 25ft $200 complete head LKHNH C 73C $240 including Bearing Original Part: LKHNHM Hay Bine including Bush $160 Original Part: LKHNHM469 A 469 Hay Bine including Bush $175 long bar partway up side of bush LKHNHM Hay Bine including Bush $225 Original Part: LKHNH469B Bush suits 469 Knifehead $70 Original Part: Prices exclude GST

51 Knifeheads Hay and Harvest Order No. Description Price New Holland continued LKHNH489B Bearing $105 suits 489 Knifehead and 971 Knifehead Original Part: LKHNHM Hay Bine including Bush $185 Order No. Description Price LKHNHM499R Hay Bine Right Hand Knife $140 including Bush Versatile LKHVER Suits Versatile Swather $100 including Bushing LKHNHM499L 499 Hay Bine Left Hand Knife $140 including Bush LKHVERB Bush suits Versatile Knifehead $40 OEM: SW1740 Order No. Description Price Hold Down Clips - General LHAHDCLP Std Hold Down Clip $5 Standard hold down clip for general use LHAHDCV Versatile Swathers only $8 LEHAHDCL Extra High Hold Down Clip $8 for use at knife drive end Hold Down Clips - New Holland LHNH4577 Hold Down Clip $15 Suits New Holland 840CD - Belt Front LHNH0787 Plate Adjuster $12 Suits LHNH On New Holland 840CD Belt Front LHNH2342 Bolt & Nut $2.80 Suits LHNH On New Holland 840CD Belt Front LHNH2134 Hold Down Clip - High Arch $16 Suits New Holland 840CD - Centre (use 3 per front) LHNH2992 Plate Adjuster $18 Suits LHNH2134 On New Holland 840CD Belt Front KSWEARST Wear Strip with Hardened Edge $6 Suits older John Deere New Holland Rigid Fronts Order No. Description Price Hold Down Clips - Honeybee Belt Fronts LHAHDCS1 Hold Down Clip - Spring loaded $25 Suits 3/8 bolts LHAHDCS2 Hold Down Clip - Spring loaded $25 Suits 7/16 bolts LHAHDA Arm Only $9 Suits Spring loaded hold down clip LHAHDP Front Wear Pad $2.75 Suits Spring loaded hold down clip LHAHDPR Rear Wear Pad $2.50 Suits Spring loaded hold down clip LHAHHBR Hold Down Roller $37 Suits Honeybee with SCH knife guards Bottom Roller LHAHHBRT Hold Down Roller $37 Suits Honeybee with SCH knife guards Top Roller LHAHHBRO Hold Down Roller $68 Suits Honeybee with SCH knife guards Centre Overlap Roller Hold Down Clips - John Deere HPJD-6928 NEW HPJD-8547 NEW HPJD-8548 NEW Hold Down Clip $42 Suits JD 630D 640D 640FD 645FD - Centre Overlap of Knives Original Part: AH Hold Down Clip $16 Suits 900 Series Draper Fronts 600 Series Draper Fronts 600 Rigid Fronts (Non-Draper) Original Part: AH Hold Down Clip $16 Suits 900 Series Draper Fronts 600 Series Draper Fronts 600 Rigid Fronts (Non-Draper) Original Part: AH Prices exclude GST 51

52 Idler Pulleys DonDye pressed steel pulleys and idlers are renowned for their quality and are used by many original equipment manufacturers. Fitted with the highest quality pre-lubricated ball bearings no maintenance is required. Adaptor bushes available to suit different bolt sizes. Made to take 1/2, 5/8 or 3/4 Bolt for centre mount. Order No Diameter Belt Width Price ABFI /8 85mm ¾ 19mm $41 ABFI mm ¾ 19mm $45 ABFI-76 4¾ 121mm ¾ 19mm $50 ABFI-100 6¼ 158mm ¾ 19mm $55 ABFI-108 6¾ 171mm ¾ 19mm $60 A32FT mm 2 50mm $75 Order No Diameter Belt Width Price BCFI-76 4¾ 121mm mm $45 BCFI-92 5¾ 146mm mm $48 BCFI-100 6¼ 158mm mm $55 BCFI-108 6¾ 171mm mm $58 BCFI-124 7¾ 197mm mm $65 BCFI-140 8¾ 222mm mm $70 Order No Diameter Belt Width Price DFI mm 1½ 38mm $70 DFI mm 1½ 38mm $90 Order No Diameter Belt Width Price 26FI mm 1½ 40mm $44 26FI-92 5¾ 146mm 1 5 /8 41.4mm $65 26FI-108 6¾ 171mm 1 5 /8 41.4mm $70 Order No Diameter Belt Width Price 32FI-92 5¾ 146mm mm $76 32FI mm mm $145 Order No Diameter Belt Width Price BVI-70 2¾ 70mm V-Idler B Section $45 BVI mm V-Idler B Section $65 BVI mm V-Idler B Section $75 BVI-108 6¾ 171mm V-Idler B Section $85 Order No Diameter Belt Width Price CVI-84 5¼ 133mm V-Idler C Section $65 CVI-100 6¼ - 160mm V-Idler C Section $70 CVI-117 7¼ 185mm V-Idler C Section $75 CVI V-Idler C Section $90 Order No Diameter Belt Width Price mm 2-53mm $ ¾ 171mm mm $80 Order No Diameter Belt Width Price mm 1½ 38.1mm $ mm mm $ mm 2 5 /8 66.6mm $ mm 3¼ 82.5mm $125 Order No Belt Width Bore Price FN108 Bush ½ $9 FN110 Bush 5 /8 $9 FN112 Bush ¾ $9 PTO Shafts, Yokes and Adaptors PTOYOKE1 11/8 Hex Bore Yoke Quick Release $ Series small type Drive from Feeder House to Front CaseIH 1010 Front PTOYOKE2 1 1 /8 Hex Bore Yoke Clamp Type $ Series small type Drive from Feeder House to Front CaseIH 1010 Front PTOYOKE5 1 1 /8 Hex Bore Yoke Quick Release $ Series large type PTOYOKE6 1 1 /8 Hex Bore Yoke Clamp Type $ Series large type LANXB1340 Adpater $ /8 21 Spline Male to 1 1 /8 Hex Female LAN Adapter $ /8 Hex Coupler 115mm long PTOSH1 1.0 metre Closed Length $390 PTO Drive Shaft - 35HP rating 2 x 1 1 /8 Hex Bore Quick Release Yokes 421 Series PTOSH2 1.0 metre Closed Length $460 PTO Drive Shaft - 21HP rating 2 x 1 1 /8 Hex Bore Quick Release Yokes 221 Series Case-IH 1010 Fronts Many other shafts available please enquire fitted with 6, 20 or 21 spline yokes, round bore yokes or 11/8 Hex Yokes LANXB540 Adapter $ /8 6 Spline Male to 1 1 /8 Hex Female 52 Prices exclude GST

53 Hydraulic Multi-Coupler John Deere LAN3PLK-0-5AFC Hydraulic Coupler Block - Harvester Side $2000 Suits John Deere 9650STS 9750STS 9660STS 9760STS 9860STS 9770STS 9870STS S660 S670 S680 S690 LAN Multi Coupler Block - Header Front Side $1075 All Couplers Fitted Suits Reel Fore & Aft, Reel Drive, Reel Lift John Deere 9650STS 9750STS 9660STS 9760STS 9860STS 9770STS 9870STS S660 S670 S680 S690 LAN Multi Coupler Block - Header Front Side $325 No Couplers Suits John Deere 9650STS 9750STS 9660STS 9760STS 9860STS 9770STS 9870STS S660 S670 S680 S690 Or choose LAN Block and any of the following couplers... LAN /8 Coupler - Suits Reel Fore & Aft $180 (2 Required) 11 /16 ORFS Thread Light or Dark Blue Marker (Snap Ring included) LAN /2 Coupler - Suits Reel Drive (Pressure) $180 Yellow Marker (Snap Ring included) LAN /2 Coupler - Suits Reel Drive (Return) $180 Red Marker (Snap Ring included) LAN /2 Coupler - Suits Reel Lift $180 Green Marker (Snap Ring included) 11 /16 ORFS thread LAN204828S Storage Bracket $120 for Multi-Coupler Block (Hardware included) LAN Coupler Seal Repair Kit $28 Suits 3 /8 Coupler - Header Front Side LAN Coupler Seal Repair Kit $28 Suits 1/2 Coupler - Header Front Side LANEC550 Dummy Plug - Header Front Side $92 Suits John Deere 50 Series - STS Required to complete circuit on Reel Speed LANEC560 Dummy Plug - Header Front Side $235 Includes Snap Ring Suits John Deere 60 and 70 Series - STS, S660 S670 S680 S690 Required to complete circuit on Reel Speed LANAH Large Valve - Suits Coupler Block - Harvester Side $395 (3 per block) ½ Replaces John Deere AH LANAXE21789 Small Valve - Suits Coupler Block - Harvester Side $340 (2 per block) 3/8 Replaces John Deere AXE21789 LANAH Tool $100 For previous two valves required to remove and replace Case-IH and New Holland LAN3P5065-5EMC Hydraulic Coupler Block - Harvester Side $690 Suits Harvester side of Case-IH 8010 onwards, New Holland CR & CX Series LAN2P5065-2AFC Hydraulic Coupler Block - 2 Port $525 Header Front Side Suits Header Front Side Case-IH 8010 onwards, New Holland CR & CX Series Has ½ large ports suitable for oil flow on Canola Pick Ups LAN2P5065-5AFC Hydraulic Coupler Block - 5 Port $650 Header Front Side Suits Header Front Side Case-IH 8010 onwards, New Holland CR & CX Series Has 2 large ports and 3 small ports LAN Coupler Seal Repair Kit $28 Suits 3 /8 Coupler - Header Front Side and Harvester Side LAN Coupler Seal Repair Kit $28 Suits 1/2 Coupler - Header Front Side and Harvester Side LAN5046 ½ Valve suits Header Front $80 Replaces Original LAN5047 3/8 Valve suits Header Front $80 Side. Replaces Original LAN5502 ½ Valve Long suits Harvester Side $140 Replaces Original LAN5503 ½ Valve Short suits Harvester Side $70 Replaces Original Agco and Massey Ferguson Some of the components on this page fit Agco R65 R75, Massey Ferguson , Challenger B Please call for details Use the Hydraulic Multi-Coupler to make Canola Pick Up Fronts easy to attach Prices exclude GST 53

54 SCH Knife Drives For Swather or Header Conversions Belt or Hydraulic Drive Top Quality German Manufacture True straight line drive from the planetary gear drive system. This system is in rotation all the time. There are no dead spots like wobble or crank drives where arms or levers have to stop twice per revolution to change direction SCH Pro-Drive $3250 Vertical Pulley Type (Pulley not included) HMOMP100 Hydraulic Motor $700 With 1 Drive shaft - suits Pro-Drive & fixed adaptor cc/RPM Pulley to suit Vertical Pro-Drive $ mm diameter Pulley to suit Vertical Pro-Drive $ mm diameter Pulley to suit Vertical Pro-Drive $ mm diameter Pulley to suit Vertical Pro-Drive $ mm diameter SCH Pro-drive $2725 Hydraulic or Horizontal Pulley Type (Not including Motor or Pulley) Adjustable Pulley $300 Suits Horizontal Pro-Drive HMOMS100 Hydraulic Motor $1250 With 1¼ Driveshaft suits Pro-Drive & fixed adaptor cc/RPM as used on Honeybee/New Holland Hydraulic Motor Mount Kit $285 Honeybee/New Holland and Univeral Universal Mount Plate $100 Basic Plate Requires adaption Clamp Ring $80 For Knifehead Knifehead Bar $90 (Drilled as required) Nylon Ring $12 Knifehead Knifehead Bearing with Plate $ Fixed Adaptor $200 Suits Pro-Drive Hydraulic drive 1 Bore Fixed Adaptor $225 Suits Pro-Drive Hydraulic drive 1¼ Bottom Drive Bearing Assembly $295 With Nylon Ring and Claw Midwest and Honeybee Bottom Drive Bearing Assembly $295 JD 900 Draper up to S/N Original Part: DE19373 AH DE Bottom Drive Bearing Assembly $255 JD 900 Draper above S/N and all 600 JD Draper Original Part: DE19294 For Knifeheads compatabile with SCH Drives see Page Prices exclude GST

55 SCH Knife Drives Grooved Nut $14 38mm Outside Diameter Grooved Nut $18 44mm Outside Diameter Plug $ Plug $ Grooved Nut Complete $38 46mm Outside Diameter Ball Bearing $195 80mm Outside Diameter Ball Bearing $75 90mm Outside Diameter Needle Sleeve $56 32mm Outside Diameter Grooved Ball Bearing $ mm Outside Diameter Cover $ Ball Bearing $60 85mm Outside Diameter Crankshaft Bottom Half $80 Centre fixing is 2 Bolt Crankshaft Bottom Half $160 Centre fixing is 1 Bolt Canola Vertical Knife Shaft $ mm length Shaft $ mm length Bevel Gear - Set of 2 $460 1 is 18 teeth 1 is 20 teeth PROFIX Top Quality European Production Hydraulic Drive Unit Fits to any Swather or Harvester Front A clean vertical cut in your Canola will reduce losses, prevent radish wrapping and let you maximise the yield of this valuable crop. The unit normally drives from the Return Line of the Hydraulic Reel Drive, or if fitted to a PTO Swather then directly off the Tractor Hydraulics. We have a simple kit with a flow control valve and associated hoses if required. features: Mechanical Simplicity High Torque Hydraulic Motor Easy Height Adjustment No Greasing Required Parts & Accessories are still available for Sabre Knives Code Description Price ZRT135-HY-R Vertical Canola Knife Right Hand $1800 ZRT135-HY-L Vertical Canola Knife Left Hand $1800 SABREVKFLOW Flow Control Valve suits Knife $ Prices exclude GST 55

56 Retractable Fingers Allis Agco MW20326 Retractable Finger Guide Inner Plate $15 Suits Allis Agco Open Fronts Original Part: MW20327 Retractable Finger Guide Outer Plate $15 Suits Allis Agco Open Fronts Original Part: MW20323 Retractable Finger Guide Nylon $12 Suits Allis Agco Open Fronts Original Part: Case-IH HPJD-869 Retractable Finger Guide $4 Suits 810 Front HPIHC-1883 Retractable Finger Guide $7 Suits Original Part: C2 HPIHC-1884 Retractable Finger $12 Suits Fronts Original Part: C A2 HPIHC-1885 Finger Holder $8 Suits P/Up Original Part: C1 HPIHC-0719 Finger Holder - Split $10 Suits P/Up Original Part: C A1 Belt Fronts HPIHC-1883 Retractable Finger Guide $7 Suits Original Part: C2 HPMD-3029 Retractable Finger - 12 Drum (210mm long) $22 To suit 12 Drum Suits CIH Original Part: HPMD-3245 Retractable Finger 11 Drum (197mm long) $22 To Suit 11 Drum Suits CIH Original Part: John Deere Old European Fronts HPJD-869 Retractable Finger Guide $4 Suits Original Part: Z30752 HPJD-868 Steel Retractable Finger $11 Suits Original Part: Z26570 HPJD-870 Retractable Finger Holder $13 Suits Original Part: AZ Series Belt Front 200 & 900 Series Rigid Fronts HPJD-1716 Retractable Finger Guide Kit $8 inc Plastic Guide, Tin Plate & 2 Torx Screws Suits all 200 & 900 Series Rigid Fronts Draper Fronts Original Part: H86918 H87044 H87192 HPJD-1716-G Guide Only $2 Suits all 200 & 900 Series Rigid Fronts Draper Fronts Original Part: H87044 HPJD-926 Retractable Finger Steel $10 Suits all 200 & 900 Series Rigid Fronts Original Part: H HPJD-927 Retractable Finger Holder $12 Suits all 200 & 900 Series Rigid Fronts Draper Fronts Original Part: AH AH AH AH87944 HPJD-927-JD Retractable Finger Holder $20 Suits all 200 & 900 Series Rigid Fronts Draper Fronts Original Part: AH AH AH AH87944 Genuine JD HPJD-8042 Retractable Finger - 200mm long $13 Suits 925D 930D 936D Original Part: H HPJD-8002 Retainer $8 Suits 925D 930D 936D Original Part: H Canola Pick Up 640X HPJD-8206 Retractable Finger Guide $7 Suits 615 Pickup 640X Original Part: H HPJD-1602 Retractable Finger Holder $15 Suits 615 Pickup 640X Original Part: AH HPJD-9914 Retractable Finger - 280mm long $15 Suits 615 Pickup 640X Original Part: H HPJD-2459 Retainer $5 Suits 615 Pickup 640X Original Part: H HPJD-9913 Spring Locking Pin (R Clip-Large) $3 Suits 615 Pickup 640X Original Part: H HPJD-8316 Spring Locking Pin (R Clip-Small) $2 Suits 615 Pickup 640X Original Part: HPJD-9912 Retainer $8 Suits 615 Pickup 640X Original Part: H Series Fronts 635D 640D 630R 635R HPJD-7264 Outer Guide Retainer $4 Suits along length of Drum (Qty 18) 635D 640D Original Part: H HPJD-7265 Inner Guide Retainer $4 Suits along length of Drum (Qty 18) 635D 640D Original Part: H HPJD-7266 Guide Ball - Plastic $3 Suits along length of Drum and tapered ends of Drum 635D 640D Original Part: H HPJD-1602 Retractable Finger Holder $15 Suits 635D 640D 630R 635R Pickup Original Part: AH HPJD-8229 Retractable Finger 270mm long $15 Suits along length of 16 Drum (635D 640D 630R 635R) and if above S/N suits tapered ends of Drum 635D 640D Original Part: AH Prices exclude GST

57 Retractable Fingers HPJD-1246 Retractable Finger Kit 243mm long $42 Suits 14 Drum 635D Original Part: AXE21246 HPJD-0784 Retractable Finger Kit 215mm long $36 Suits taper on end of 16 Drum 635D 640D Original Part: AXE40784 HPJD-8206 Retractable Finger Guide $7 Suits 615 Pickup Original Part: H HPJD-0498 Inner Guide Retainer $10 Suits tapered ends of Drum (Qty 2) 635D 640D excluding Advanced model with 14 Drum Original Part: HXE60498 HPJD Outer Guide Retainer $10 Suits tapered ends of Drum (Qty 2) 635D 640D excluding Advanced model with 14 Drum Original Part: HXE60497 HPJD-7266 Guide Ball - Plastic $3 Suits along length of Drum and tapered ends of Drum 635D 640D Original Part: H HPJD-2459 Retainer $5 Suits 635D 640D 630R 635R Original Part: H HPJD-9913 Spring Locking Pin (R Clip-Large) $3 Suits 635D 640D 630R 635R Original Part: H HPJD-8316 Spring Locking Pin (R Clip-Small) $2 Suits 635D 640D 630R 635R Original Part: HPJD-9912 Retainer $8 Suits 635D 640D 630R 635R Original Part: H HPJD-7899 Retainer $60 Suits fingers on tapered end only 635D 640D excluding Advanced model with 14 Drum Original Part: HXE67899 HPJD-8570 Retainer $17 Suits fingers on tapered end only 635D 640D excluding Advanced model with 14 Drum Original Part: HXE68570 New Holland 705 Fronts HPJD-869 Retractable Finger Guide $4 Suits TR70 TR Original Part: HPNH-1415 Top & Bottom Plates with Bolts & Ball $16 Suits TR70 TR Original Part: HPNH-878 Retractable Finger $8 Suits TR70 TR85 (705 Fronts) Original Part: HPNH-879 Retractable Finger Holder $8 Suits Original Part: C Fronts HPNH-1002 Retractable Finger Guide $12 Suits Fronts Original Part: HPNH-919 Retractable Finger $12 Suits Fronts 71C 72C 73C Original Part: HPNH-1755 Retractable Finger Holder $12 Suits Fronts 71C 72C 73C Original Part: Macdon Draper Front HPIHC-1883 Retractable Finger Guide $7 Suits Macdon Original Part: HPMD-3029 Retractable Finger 12 Drum $22 Suits Macdon D60 To suit 12 Drum Original Part: HPMD-3245 Retractable Finger 11 Drum $22 To Suit 11 Drum Suits Macdon D60 Original Part: HPIHC-1885 Retractable Finger Holder $10 Suits Macdon D60 Original Part: Mid West Draper Front MW20326 Retractable Finger Guide Inner Plate $15 Midwest Belt Fronts MW20327 Retractable Finger Guide Outer Plate $15 Midwest Belt Fronts MW20323 Retractable Finger Guide Nylon $12 Midwest Belt Fronts MWRF34ZP Retractable Finger $34 Midwest Fronts - 260mm HPJD-927-JD Retractable Finger Holder $20 Midwest Belt Fronts Recommended because of higher shaft speed Honeybee Draper Front Genuine JD HPJD-869 Retractable Finger Guide $4 Suits Honeybee & New Holland Belt Fronts Original Part: HPJD-1716 Retractable Finger Guide Kit $8 including Plastic Guide, Tin Plate & 2 Torx Screws Suits Honeybee & New Holland Belt Fronts Original Part: HPJD-1716G Guide Only $2 Suits Honeybee & New Holland Belt Fronts HPJD-926 Retractable Finger Steel $10 Suits Honeybee & New Holland Belt Fronts Original Part: HPJD-927-JD Retractable Finger Holder $20 Suits Honeybee & New Holland Belt Fronts Original Part: HB73324 Recommended because of higher shaft speed Genuine JD Prices exclude GST 57

58 Retractable Fingers Massey Ferguson HPMF-891 Retractable Finger $13 Suits Original Part: M2 HPMF-1717 Retractable Finger Holder $30 Suits Original Part: M1 HPJD-869 Retractable Finger Guide $4 Replaces Ball & Plate System on Poly Retractable Fingers (Insurance Against Serious Damage) Replace Steel Retractable Fingers Strong & Durable Made from tough fibreglass with outer coating of hardwearing plastic Will not damage your concave, drumbars or other parts of the header like steel fingers. Retract 1 Guide & Torx Screws $5 Suits 200 & 900 John Deere Rigid Fronts Retract 1F Poly Finger only $14 Suits 200 & 900 John Deere Rigid Front Retract 2 Guide & Attaching Screws $4 All C-IH Fronts Retract 2F Finger only All C-IH $ Fronts Retract 3 Guide & Attaching Screws suits NH 971 Front $4 Retract 3F Poly Finger suits NH 971 Front $13 Header Reel Bats 184 mm (7 1/ 4") Order No. Size Model Application Price (Set of 5) Per Set HRB ¼ x 22ft John Deere 200 & 900 fronts $1025 HRB ¼ x 24ft New Holland 971, 71C, 73C fronts $1150 HRB ¼ x 25ft Case-IH 1010 & 1020 fronts $1190 HRB ¼ x 30ft IH810 Fronts $1380 John Deere 200 & 900 fronts Case-IH 1010 & 1020 fronts HRB ¼ x 18ft Case-IH & Macdon Belt Fronts $ , 1042, 36ft, 2 sets required John Deere, Case-IH 1010, New Holland, Macdon 9" Take the Rattle Out of Your Reel Made From Galvanised Steel. Full Length One Piece Makes The Reel More Stable Individual Bats Available 2-3mm n Bolts clamp Reel Bat and Tension it up because edges are made lower than pan section. Eliminates Rattle & Vibration which cause fractures. Adjustable Lentil Lifter Lentil Lifter Order No. Model Application Price CL1610 All makes and models includes bracket $32 58 Prices exclude GST

59 Fits all Open and Belt Fronts for Canola Field Peas & Downed Crops Shoe section made from high-grade spring steel Croplifters Height & length adjuster. Also allows some side movement Heavy Duty is Double Thickness We recommend one croplifter per foot across the front. Order No. Order No. Model Application Description Price Standard Heavy Duty Agco/Allis Standard Heavy Duty CROPLIFD 1 CROPLIFD1HD L & N & R Series Rigid Fronts Deluxe Croplifter with saddle (60mm high) $45 $49 and 2 x 3 /8 HT bolt/nut to attach croplifter CROPLIFD 5 CROPLIFD5HD R Series Draper Fronts Deluxe Croplifter with saddle (75mm high) $45 $49 and 4 x 3 /8 HT bolt/nut Case-IH CROPLIFD 1 CROPLIFD1HD International 810 Fronts Deluxe Croplifter with saddle (60mm high) $45 $49 and 2 x 3 /8 HT bolt/nut to attach croplifter CROPLIFD3 CROPLIFD2HD 3050 Deluxe Croplifter with Saddle (75mm high) $45 $49 and 2½ x 7 /16 HT bolt/nut to attach croplifter CROPLIFD 3 CROPLIFD3HD Case-IH Fronts Deluxe Croplifter with saddle (75mm high) $45 $49 Macdon and Case-IH Draper Fronts and 2 1 / 2 x 7 /16 HT bolt/nut to attach croplifter Advise if Hex Heads or Cuphead Bolts attaching Knife Guards for Macdon Case-IH Draper Fronts John Deere CROPLIFD 1 CROPLIFD1HD All 200 & 900 Series Fronts Deluxe Croplifter with saddle (60mm high) $45 $49 and 2 x 3 /8 HT bolt/nut to attach croplifter CROPLIFD 6 CROPLIFD6HD Draper Fronts 930D 936D 635D 640D Deluxe Croplifter with saddle (75mm high) $45 $49 and 2 x 3 /8 HT bolt/nut to attach croplifter Massey Ferguson CROPLIFD 1 CROPLIFD1HD All Fronts 20ft to 30ft Deluxe Croplifter with saddle (60mm high) $45 $49 and 2 x 3 /8 HT bolt/nut to attach croplifter New Holland CROPLIFD 1 CROPLIFD1HD NH & 806 Fronts Deluxe Croplifter with saddle (60mm high) $45 $49 and 2 x 3 /8 HT bolt/nut to attach croplifter CROPLIFD 2 CROPLIFD2HD C 73C Deluxe Croplifter with saddle (60 mm high) $45 $49 and 2 x 7 /16 HT bolt/nut to attach croplifter CROPLIFD3 CROPLIFD2HD 840CD Deluxe Croplifter with Saddle (75mm high) $45 $49 and 2½ x 7 /16 HT bolt/nut to attach croplifter Honeybee/NH CROPLIFD 4 CROPLIFD4HD Honeybee and New Holland Deluxe Croplifter with saddle (110mm high) $45 $49 Draper Fronts with factory lift kit and 3 x 3 /8 HT bolt/nut to attach croplifter Macdon/Case-Ih CROPLIFD 3 CROPLIFD3HD Macdon and Case-IH Deluxe Croplifter with saddle (75mm high) $45 $49 Draper Fronts with Lift Kit and 2 1 / 2 x 7 /16 HT bolt/nut to attach croplifter Advise if Hex Heads or Cuphead Bolts attaching Knife Guards Midwest CROPLIFD 7 CROPLIFD7HD Midwest Belt Fronts Deluxe Croplifter with saddle (60mm high) $45 $49 Belt Fronts and 2 x 3 /8 HT bolt/nut to attach croplifter All Brands Spare Parts CROPLFNS CROPLFNSHD All brands replacement main croplifter section NB: Saddle excluded. $33 $38 CLSSTD - Agco Case-IH JD Rigid MF Midwest NH Croplifter Saddle 60mm High $13 CLS CIH Macdon JD Draper Croplifter Saddle 75mm High $13 CLSHBEE - Honeybee Croplifter Saddle 110mm High $ Prices exclude GST 59

60 Roller Chain We Sell & Recommend Features Include: Quad rivetted pins for sideplate security Extra heat treatment of pin for longer chain life Get AGRI-TUFF Performance!! Drawing heavily on 80 years of design experience and over 20 years of agriculture experience worldwide, TSUBAKI has developed innovative roller chain AGRI-TUFF, especially designed for agriculture applications. Unique new design and new materials improve the reliability and life of your agricultural chain drive. Order Single Pitch Description Buy Code or Duplex Quantity AT40-1 Single 1 / 2 Single Row Chain Box of 10ft AT40-1CL Single 1 / 2 Conn Link Single Each AT40-10L Single 1 / 2 Offset Link Single Each AT50-1 Single 5 / 8 Single Row Chain Box of 10ft AT50-2 Duplex 5 / 8 Double Row Chain Box of 10ft AT50-1CL Single 5 / 8 Conn Link Single Each AT50-10L Single 5 / 8 Offset Link Single Each AT50-2CL Duplex 5 / 8 Conn Link Double Each AT50-20L Duplex 5 / 8 Offset Link Double Each AT60-1 Single ¾ Single Row Chain Box of 10ft AT60-2 Duplex ¾ Double Row Chain Box of 10ft AT60-1CL Single ¾ Conn Link Single Each AT60-10L Single ¾ Offset Link Single Each AT60-2CL Duplex ¾ Conn Link Double Each AT60-20L Duplex ¾ Offset Link Double Each AT60-1HD Single ¾ Single Row Chain Heavy Duty (JD s) Box of 10ft AT60-1CLHD Single ¾ Conn Link Single Heavy Duty Each AT60-10LHD Single ¾ Offset Link Single Heavy Duty Each AT80-1 Single 1 Single Row Chain Box of 10ft AT80-1CL Single 1 Conn Link Single Each AT80-10L Single 1 Offset Link Single Each ALL 10ft BOXES INCLUDE ONE CONN LINK Cutting Height Gauge Know your cutting height at all times Installs in the cab on window Simple no electrics Highly visible day or night Order Code lokkhg $ Prices exclude GST

61 Electric Linear Acuators Electric Linear Actuators 12 or 24 Volt for a variety of uses around the farm. Air seeders Control of seed and fertiliser. Chute doors Trucks, silos, sheep feeders and fertiliser spreaders. Available in many sizes, load capacities and stroke lengths. We recommend Thomson Warner Electric Linear Actuators USA manufacture. Code ELECTRAK 1 ELECTRAK 2 E050 E150 Input Voltage 12volt, 24volt 12volt 12volt, 24volt 12volt, 24volt Load capacity (lbs.) 25 on 12volt 250 on 12volt 50 on 12volt 225 on 12volt 75 on 24volt 112 on 24volt 450 on 24volt Stroke length (inches) 1, 2, 4, 6 4, 8, 12, 18, 24 4, 6, 8 4, 6, 8, 10, 12 Type of lead screw Acme screw Acme screw Acme screw Acme screw Duty cycle, full load 25% 25% 25% 25% Load limiting clutch No Yes Yes No Limit Switches Fixed No Fixed Adjustable Motor overload protection Yes Yes Yes Yes Price $650 $900 $475 $975 Hay Loader Tynes Order No. Description/Application Price TP77017 Conus 2 Taper 980mm long $120 TP77035 Conus 2 Taper 1100mm long $122 TP77018 Conus 2 Taper 1250mm long $125 TP77019 Conus 2 Taper 1400mm long $180 TP1841 Conus 2 weld in mounting sleeve $ Prices exclude GST 61

62 Attaching Brackets - 2 way s, GPS and Screens Suits John Deere Tractors and Headers GPS Receiver Brackets AFG06 GPS Receiver Bracket $260 Suits: Tractors 7200R 7215R 7230R 7260R 7280R 8225R 8235R 8245R 8260R 8270R 8285R 8295R 9410R 9460R 9510R 9560R Suits John Deere S660 S670 S680 S690 Headers AFG07 GPS Receiver Bracket Kit $280 Consists of AFG02 Bracket as above plus adaptors Suits and 30 Series 8000 and 9000 Tractors and SP John Deere Sprayers AFG01 GPS Receiver Bracket $190 Converts original Greenstar Bracket to accept starfire with deluxe shroud. Suits 7000 to 7930 inclusive - John Deere tractors windrowers and conditioners and headers 9650STS to 9870STS inclusive Headers Display Screen Brackets AFD02 Display Screen Bracket $300 Suits John Deere S660 S670 S680 S690 Headers AFD03 Display Screen Bracket $255 Suits all John Deere tractors ending with or 30 all 8000 and 9000 series tractors all 7R 8R and 9R tractors and John Deere sprayers 2 Way Radio Brackets Features Simple to install, bolting to integrated factory cab mounting holes Mobile - easily moved from machine to machine AFR01 2 Way Radio Bracket $185 Suits John Deere 8100 to 8630 inclusive Tractors 9100 to 9630 inclusive Tractors 4730 to 4940inclusive Tractors All with Commandview Cab Farm inspired custom fit design integrates with cab design Powder coated durable paint finish AFR04 2 Way Radio Bracket $185 Suits John Deere S660 S670 S680 S690 Headers AFR02 2 Way Radio Bracket $185 Suits John Deere 7R 8R 9R tractors including track versions Commandview II Cab AFR05 2 Way Radio Bracket $185 Suits large frame 6R Tractors AFM01 Microphone Holder $40 Suits all tractor and header cabs 62 Prices exclude GST

63 Heavy Duty Belts with Kevlar fibres for Strength and Longevity Belts Order No. Model Application Description Price Agco/Allis Gleaner HB R40 R42 R50 R52 R62 R72 R55 R65 R75 S67 S77 Rear Feed Conveyor Drive $109 HB R72 above S/N R65 above S/N HR62101 R75 R66 R76 S66 S77 Air Cond Compressor Drive 51¼ Length $16 HB R40 R42 R50 R52 R62 R65 R72 R75 Straw Spreader Drive $80 HB R62 above S/N R72 above S/N S67 S77 Jackshaft Drive Right Hand $112 R65 R66 R75 S68 S78 S88 S96 S97 S97 HBA R62 above S/N MJ62101 Alternator/Fan Drive $60 HB R42 R52 R62 R65 R72,R75 S67 S77R66 R76 Clean Grain Elevator $120 HB R42 R52 R62 R65 R72,R75 S67 S77,R66 R78 Header Drive Constant Speed $165 HB R42 R52 R65 R62 R72 R75 R66 R76 Impeller/Chopper Drive $88 HB R62 R72 R65 R75 R66 R76 Rear Feed Conveyor/Chopper Fine Cut $118 HB R42 R52 R62 above S/N R72 above S/N R65 R75 Shoe Drive $95 HB R62 R65 R72 R75 R66 R76 Bin Unloader C shaft Left Hand With Turret $110 HB R42 R52 R62 R65 R72 R75 R66 R76 Tailings Drive $72 HB R42 R52 R62 R65 R72 R75 R66 R76 S67 S77 S68 S78 S88 Tailings Drive with Tailings Return $135 S96 S97 S98 HB R42 R52 R62 R65 R72 R75 Bin Unloader Drive Left Hand $73 HBV R62 R65 R72 R75 Alternator/Fan Drive $105 HB R62 R65 R66 R72 R75 R76 Spreader Pump Drive $88 HB R62 R65 R66 R72 R75 R76 Cylinder Drive $580 HB R65 R67 R75 R77 Header Drive Variable Speed $630 HB R62 R65 R72 R75 S67 S77 Pivot Jackshaft Drive $195 HB R62 R65 R66 R72 R75 R76 Separator Drive $153 HB S67 S77 Rotor Drive $465 HB S67 S77 S68 S78 S88 S96 S97 S98 Aspirator Fan Drive $18 HB R62 R66 R72 R76 S67 S77 Rotary Screen $32 HB S67 S68 S77 S96 S97 S98 Fan/Alternator Drive $59 HB S68 S78 S88 S96 S97 S98 Bin Unloader Drive $115 HB S67 S77 R66 R76 R65 R75 S68 S78 S88 Main Clutch Shaft Drive $365 HB S67 S77 S68 S78 S88 S96 S97 S98 Shoe Drive $52 Case-IH AFX HB Fan Drive $74 HB Air Conditioning, Alternator, Water Pump $33 HB above S/N HAJ Straw Chopper Drive $ HB Alternator, Water Pump, Air Conditioner $62 HB Bubble Up Auger (Left Hand & Right Hand) $106 HB Clean Grain Elevator $106 HB Beater Drive $185 HB ( both Prior to S/N ) Straw Chopper Drive 2800 RPM $195 HB Tailings Drive $112 HB Unloading Auger Drive $165 HB Rotary Screen $36 HB Fan Drive $62 HB Cleaning System Drive with Beater $210 HB301146A Cleaning Fan Drive $85 HB Feeder Drive without Rock Trap $385 HB Cleaning System Drive with Chopper $ Prices exclude GST 63

64 Belts Order No. Model Application Description Price Case-IH HB244420A Rotor Drive $390 HB244422A Rotor Drive $500 HB244423A before S/N Rotor Drive $555 HB413159A above S/N S/N Rotor Drive $420 HB above S/N Rotor Drive $420 HB191241C Separator Drive $390 HB Separator Drive $375 HB400427A above S/N Separator Drive $490 HB C before S/N Separator Drive $305 HB191288C before S/N Auxillary Pump Drive $77 HB124572A Auxillary Pump Drive $100 HB124573A before S/N Auxillary Pump Drive $130 HB C Auxiliary Pump Drive $115 HB440498A above S/N Auxiliary Pump Drive $165 HB Cleaning System Drive with Beater (Also C2) $ HB191305C , Cleaning Fan Jackshaft Drive $ before S/N HB301146A above S/N above S/N Cleaning Fan Drive $85 HB195396C Cleaning Fan Drive $90 HB C Cleaning Fan Drive $ before S/N before S/N HB317904A above S/N Cleaning Fan Jackshaft Drive $95 HB192738C Feeder Drive without Rock Trap $ HB194528C Feeder Drive $320 HB to S/N Feeder Jackshaft Drive with 54½ Feeder House $ Feeder Drive without Rock Trap HB C Feeder Drive with Rock Trap $340 HB C Feeder Drive with Rock Trap $330 HB393750A Feeder Jackshaft Drive with 60 Feeder $ before S/N HB402370A above S/N , 2388 above S/N Feeder Jackshaft Drive with 54½ Feeder $390 HB402368A above S/N above S/N Feeder Jackshaft Drive with 60 Feeder $390 HB191290C Grain Tank Unloader Drive $85 HB C above S/N Grain Tank Unloader Drive $120 HB C Grain Tank Unloader Drive $135 HB396829R before S/N Airconditioner Compressor $17 HB537072R Alternator, Fan, Water Pump $60 HBJ Alternator, Fan, Water Pump $50 HB above S/N above S/N Alternator, Fan $ above S/N HB247428A Fronts Knife Drive $100 HB Elevator Drive without OEM Straw Chopper $ All with Beater, Replaces C2 HB Elevator Drive with OEM Straw Chopper $ (Also C1) 64 Prices exclude GST

65 Belts Order No. Model Application Description Price Case-IH continued HB above S/N above S/N 24000, Straw Spreader Drive $ (Replaces C1) HB C Straw Chopper Drive $95 HB C Straw Chopper Drive $130 John Deere S660 S670 S680 S690 HBH S660 Rotor Drive $735 HBH S670 S680 S690 Rotor Drive $1195 HBH S660 S670 S680 S690 Feeder House Drive and Reel Pump - High Capacity $400 HBAH S660 S670 S680 S690 Right Hand Jackshaft (Front) $165 HBH S660 S670 S680 S690 Right Hand Jackshaft (Rear) $115 HBH S660 S670 Tailings Elevator Drive $62 HBH S660 S670 S680 S690 Rotary Screen (Screen Side) $60 HBAXE32806 S660 S670 S680 S690 above S/N Alternator with front drive $75 HBH S660 Feeder House - Fixed Speed $185 HBH S660 Feeder House - Variable Speed Heavy Duty $425 HBHXE45928 S660 S670 Feeder House Variable Drive, High Torque $595 HBH S660 S670 S680 S690 Feeder House - Fixed Speed, Heavy Duty, High Torque $385 HBH S670 S680 S690 Front End Drive 5-speed feeder house $660 HBH S670 S680 Clean Grain Elevator $350 HBH S660 S670 S680 S690 Rotary Screen (Engine Side) $32 HBH S660 S670 S680 S690 Feed Accelerator, Std Speed $180 HBH S670 S680 S690 Feed Accelerator, High Speed $245 HBH S660 S670 S680 S690 Feed Accelerator, Slow Speed $210 HBAXE15594 S660 S670 S680 S690 Cleaning Fan Drive $120 HBH S660 S670 S680 S690 Shoe Conveyor Auger Drive $255 HBAh S660 S670 Unloading Auger System $135 HBAh S680 S690 Unloader Drive $175 HBH S670 Chopper Drive, Upper, Xfc (3Hc) $390 HBH S680 S690 Chopper Drive, Upper, Xfc (4Hc) $570 HBH S660 S670 S680 S690 Chopper Drive, Lower, Xfc (3Hc) $400 HBAH S670 S680 S690 Discharge Beater Drive (Joined Belt, 2 Bands) $240 John Deere 9650STS 9750STS 9660STS 9760STS 9860STS 9670STS 9770STS 9870STS HBH STS 9750STS 9660STS 9670STS 9760STS Rotor Drive $735 HBH STS above S/N STS 9870STS Rotor Drive $1195 HBH STS to S/N STS Rotor Drive Variable $1170 HBH STS 9750STS before S/N Feeder House Drive (Fixed Speed) $155 HBH STS 9750STS 9660STS 9760STS Feeder House Drive and Reel Pump - High Capacity $ STS 9670STS 9770STS 9870STS HBH STS 9870STS Feeder House - Fixed Speed, Heavy Duty $385 HBH STS 9750STS 9660STS 9760STS 9860STS Feeder House - Fixed Speed $220 HBHXE STS 9670STS 9760STS 9770STS 9860STS Feeder House Variable Drive, High Capacity (Also H220911) $595 HBH STS 9660STS 9670STS 9750STS 9760STS 9770STS 9860STS Feeder House Variable Speed Heavy Duty $425 HBH STS above S/N STS above S/N Feeder House Variable Speed Standard Capacity $355 HBH STS to S/N STS before S/N Feeder House Variable Speed Standard Capacity $300 HBH STS 9670STS 9760STS 9770STS 9860STS Feeder House Fixed Speed $185 HBH STS Feeder House Variable Speed Standard Capacity $345 HBAH STS 9750STS 9660STS 9760STS Right Hand Jackshaft (Front) $ STS 9670STS 9770STS 9870STS Prices exclude GST 65

66 Belts Order No. Model Application Description Price John Deere 9650STS 9750STS 9660STS 9760STS 9860STS 9670STS 9770STS 9870STS continued HBH STS 9750STS 9660STS 9760STS Right Hand Jackshaft (Rear) $ STS 9670STS 9770STS 9870STS HBH STS 9750STS 9660STS 9760STS Tailings Auger and Elevator Drive $ STS 9670STS 9770STS 9870STS HBH STS 9750STS 9660STS before S/N Feed Accelerator - Standard Speed $ STS before S/N STS before S/N HBH above S/N above S/N , Feed Accelerator (Standard) $ above S/N HBH STS above S/N Feed Accelerator, High Speed $245 HBH STS 9750STS 9660STS 9760STS 9860STS Feed Accelerator - Slow speed or Rice $ STS 9770STS 9870STS 9880STS HBR STS 9660STS 9750STS 9760STS Alternator (185 Amp.) $80 HBR STS 9660STS 9750STS 9760STS Alternator (95 Amp.) $60 HBH STS 9660STS 9670STS to S/N STS 9760STS Feed Accelerator Drive; High-Speed $ STS 9860STS 9870STS before S/N HBH STS 9770STS 9870STS Header/Reel Pump $660 HBH STS 9660STS Header & Reel Pump HIGH CAPACITY $345 HBH STS 9660STS 9670STS 9750STS 9760STS Header & Reel Pump HIGH CAPACITY $ STS 9860STS 9870STS HBH STS above S/N STS above S/N Powershaft & Reel Pump $185 HBH STS before S/N STS before S/N Rotary Screen (Engine Side) $30 HBH STS above S/N STS before S/N Rotary Screen (Engine Side) $ STS above S/N STS before S/N STS before S/N HBH STS 9770STS 9870STS above S/N Rotary Screen (Screen Side) $60 HBH STS above S/N STS 9760STS Rotary Screen (Engine Side) $35 above S/N STS 9860STS above S/N STS HBH STS above S/N STS above S/N , Rotary Screen Drive (Screen Side) $ STS above S/N HBH STS above S/N STS before S/N Rotary Screen (Screen Side) $ STS above S/N STS before S/N STS before S/N HBH STS above S/N STS above S/N Straw Chopper (Also H204747) $ STS 9760STS 9670STS 9770STS 9870STS HBHXE STS 9770STS 9870STS Countershaft, Beater & Chopper, Replaces H $280 HBH STS 9870STS Straw Chopper $295 HBHXE STS 9770STS 9870STS Countershaft, Beater & Chopper, Replaces H $345 HBR STS 9870STS Engine Fan $130 HBH STS 9660STS 9670STS 9750STS 9760STS 9860STS Clean Grain Elevator $170 HBH STS 9870STS Clean Grain Elevator $350 HBH STS 9750STS Cleaning Fan $110 HBH STS 9670STS 9760STS 9770STS 9860STS Cleaning Fan $110 HBHxe STS 9660STS 9670STS 9750STS Countershaft Beater & Chopper (Replaces H157514) $ STS 9770STS 9860STS 9870STS HBH STS 9660STS 9670STS 9750STS 9760STS 9770STS Shoe Fan & Conveyor Augers $ STS 9870STS 9880STS HBAh STS 9660STS 9670STS 9750STS Unloading Auger System $ STS 9770STS 9860STS 9870STS HBH STS 9660STS 9670STS 9750STS 9760STS 9770STS Discharge Beater $ STS 9870STS John Deere CTS CTSII HBH CTS CTSII 9650CTS Cylinder Intermediate Drive $395 HBH CTS CTSII 9650CTS Cylinder Drive $265 HBH CTS Cylinder Intermediate Drive, Ext. Range $400 HBH CTS CTSII 9650CTS 9660CTS Cylinder Drive, Slow Speed $230 HBH before S/N before S/N , Reel Pump and Header $ before S/N Prices exclude GST

67 Belts Order No. Model Application Description Price John Deere CTS CTSII continued HBH above S/N Reel Pump and Header $ above S/N CTS CTSII 9650CTS 9660CTS HBH CTS CTSII 9650CTS 9660CTS Feeder House Variable Speed $270 HBH CTS CTSII 9650CTS Feeder House Fixed Speed with Reverser $175 HBH CTS CTSII 9650CTS 9660CTS Shoe, Straw Walker, Conveyor Auger $170 HBAH CTS CTSII 9650CTS 9660CTS Unloading System $115 HBH CTS CTSII 9650CTS 9660CTS Secondary Counter Shaft $105 HBH Straw Chopper Front $105 HBN CTS CTSII 9650CTS 9660CTS Tailings Auger and Elevator (Lower) $75 HBH CTS CTSII Straw Chopper Front $120 HBRe before S/N before S/N Alternator $40 HBH CTS CTSII 9650CTS 9660CTS Alternator $24 HBH Cts Cts Ii Separator Drive $560 HBM Cts Ii 9510 Chaff Spreader Drive, Straw Spreader Also M95728 $100 HBH Straw Spreader $90 HBH Air Conditioning Compressor $15 HBH CTS before S/N Air Conditioning Compressor, Alternator $80 HBH above S/N Chopper, Windrow Or Forward Position $53 HBH Chopper, Windrow Or Forward Position $71 HBH Chopper, Rear Operating Position $95 HBH before S/N Cooling Fan $28 HBH above S/N CTS Cooling Fan $85 HBH Cooling Fan $28 HBH above S/N above S/N Rotary Screen $ above S/N CTSII HBH above S/N CTS above S/N Rotary Screen Drive $ above S/N above S/N HBH CTS CTSII 9650CTS 9660CTS Rotary Screen (Screen Side) $35 HBH above S/N above S/N CTS Clean Grain Elevator $185 HBH above S/N Clean Grain Elevator $195 HBH before S/N before S/N , Separator Fan, Regular Speed $ before S/N CTS before S/N HBH above S/N Separator Fan, Regular Speed $ CTS above S/N CTSII HBAh Beater Drive $100 New Holland CR920 CR940 CR960 CR970 CR9040 CR9060 CR9070 CR9080 CR9090 HB CR920 CR940 CR960 CR970 CR9070 Rotor Variator (2944mm) $875 HB CR920 CR940 CR960 CR9040 CR9060 Rotor Variator (2997mm) $895 HB Cr920 Cr940 Cr960 Cr9060-Cr9070 before S/N C627 Rotor Variator, High Speed (2997mm) $995 Cr9060 Cr9070 above S/N D627 HB Cr970 Cr9080 Cr9090 before S/N C660 some CR8090 Rotor Variator, High Speed, High Performance (2945mm) $990 Cr9080 Cr9090 above S/N D660 CR10.90 HB CR9040 CR9060 Air Conditioner Compressor $33 HB CR920 CR940 CR960 CR970 CR9040 CR9060 Beater Drive $140 HB CR9060 CR9070 CR9080 CR9090 CR7090 CR8080 CR8090 Beater Drive $225 HB CR920 CR940 CR960 CR970 CR9040 CR9060 Chopper Drive Upper and Lower $135 CR9070 CR9080 CR6090 CR7090 CR8080 CR8090 CR6.80 CR6.90 CR7.90 HB CR920 CR940 CR960 CR970 CR9040 CR9060 Main Drive $ Prices exclude GST 67

68 Belts Order No. Model Application Description Price New Holland CR920 CR940 CR960 CR970 CR9040 CR9060 CR9070 CR9080 CR9090 continued HB CR9040 CR9060 CR9070 CR9080 Grain Elevator Drive $150 HB CR920 CR940 CR960 CR970 CR9040 CR9060 Main Drive (4V) $325 HB CR9060 CR9070 CR9080 CR9090 CR7090 CR8080 Main Drive (5V) $435 CR8090 CR6.80 CR6.90 CR7.90 HB CR920 CR940 CR960 CR970 CR9040 Primary Feeder Drive with Variator $225 CR9060 CR9070 HB CR920 CR940 CR960 CR970 CR9040 CR9060 Primary Feeder Drive without Variator $300 CR9070 CR9080 HB CR920 CR940 CR960 CR970 CR9040 CR9060 Returns Drive, LH Enhanced Cleaning $75 CR9070 CR9080 CR9090 HB CR6090 CR7090 CR8080 CR8090 CR6.80 CR6.90 Shaker Shoe Drive $75 CR7.90 CR8.90 CR9.90 CR10.90 HB CR920 CR940 CR960 CR970 Rotary Fan $45 HB CR920 CR940 CR960 CR970 Rotary Fan Jackshaft $22 HB CR920 CR940 CR960 CR970 CR9040 CR9060 Secondary Feeder Drive $540 HB CR920 CR940 CR960 CR970 CR9040 CR9060 Shaker Shoe Drive $80 CR9070 CR9080 CR9090 HB CR920 CR940 CR960 CR970 Return Drive Left Hand $75 HB CR920 CR940 CR960 CR970 CR9040 CR9060 CR9070 CR9080 Unloading Auger Drive $150 CR9090 CR6090 CR7090 CR8080 CR8090 CR6.80 CR6.90 CR7.90 HB CR960 CR970 CR9060 CR9070 CR9090 Returns Elevator Drive, RH (Also ) $55 HB Cr920 Cr940 Cr960 Cr970 CR9040 CR9060 CR9070 Feeder Drive, Vari-Speed with Variator $800 HB CR9040 CR9060 CR9070 CR9080 Primary Feeder Drive with Variator $215 HB CR9060 CR9070 CR9080 CR9090 CR7090 CR8080 CR8090 Secondary Feeder Drive $625 HB CR9040 CR9060 CR9070 CR9080 Feeder Drive with Variator $485 HB Cr920 Cr940 Cr960 Cr970 Cleaning Fan, Self Levelling Variator Drive $140 HB Cr920 Cr940 Cr960 Cr970 Elevator Grain Drive $55 HB Cr920 Cr940 Cr960 Cr970 Shaker Shoe $85 HB Cr9040 Cr9060 CR9070 CR9080 CR9090 Water Pump $115 New Holland CX840 CX860 CX880 CX8070 CX8080 CX8090 HB Cx840 Cx860 Cx880 Main Drive $255 Cx8070-Cx8080-Cx8090 prior to S/N C724 HB Cx840 Cx860 Cx880 Cx8070 Cx8080 Cx8090 Unloading Auger $120 HB Cx840 Cx860 Cx880 Cx8070 Cx8080 Cx8090 Beater Drive $105 HB Cx840 Cx860 Cx880 Cx8070 Cx8080 Cx8090 Shaker Shoe, Self Levelling $78 HB Cx840 Cx860 Cx880 Cx8070 Cx8080 Cx8090 Tailings Elevator & Shaker Shoe, Self Leveling $85 HB Cx840 Cx860 Cx880 Cx8070 Cx8080 Cx8090 Cleaning Drive, Intermediate Shaft $140 HB Cx840 Cx860 Cx880 Cx8070 Cx8080 Cx8090 Straw Walker $60 HB Cx840 Cx860 Cx880 Cx8070 Cx8080 Variator Drum $575 HB Cx840 Cx860 Cx880 Cx8070 Cx8080 Cx8090 Header Drive $270 HB Cx840 Cx860 Cx880 Cx8070 Cx8080 Cx8090 Grain Elevator $35 HB CX840 CX860 CX880 CX8070 CX8080 CX8090 Bottom Auger Tailings Elevator $55 HB CX840 CX860 CX880 CX8070 CX8080 CX8090 Rotary Fan $45 HB CX840 CX860 CX880 CX8070 CX8080 CX8090 Vari Drive Fan Self Level $140 HB CX840 CX860 CX880 CX8070 CX8080 CX8090 Chopper Drive Upper $225 Midwest MW14MGT3137 Midwest Belt Fronts Knife Drive Belt $900 MW4B77 Suit Agco/Claas - Midwest Belt Fronts 4 B banded belt Drum Drive Belt 77 $275 MW4B78 Suit Case New Holland - Midwest Belt Fronts 4 B banded belt Drum Drive Belt 78 $275 MW4B79 Suit John Deere - Midwest Belt Fronts 4 B banded belt Drum Drive Belt 79 $ Prices exclude GST

69 Belts Order No. Model Application Description Price New Holland TR70 TR85 TR86 TR87 TR88 TR89 TR95 TR96 TR97 TR98 TR99 TX66 TX68 HB TR89 TR95 TR96 TR97 TR98 Rotor Vari-Drive - Standard $560 HB TR89 TR95 TR96 TR97 TR98 TR99 Rotor High Speed (Replaces ) $625 HB TR89 TR96 TR97 TR98 TR99 Rotor Drive - Varispeed - Standard $760 HB TR70 TR75 TR85 TR86 TR87 TR88 Clean Grain Elevator Drive (Also HB191288C2) $55 HB TR89 TR96 TR97 TR98 TR99 Clean Grain Elevator Drive - Improved $148 HB TR70 TR75 TR85 Unloading Auger Drive $65 HB TR70 TR75 TR85 TR86 TR87 TR88 Shaker Shoe Drive $210 HB TR89 TR95 TR96 TR97 TR98 TR99 Discharge Beater Drive (Also ) $140 HB TR99 Header Drive (Also ) $325 HB TR70 TR75 TR85 TR95 Header Drive $180 HB TR70 TR75 TR85 Beater Drive $52 HB TR86 above S/N TR87 below S/N Main Drive Hydrostatic $495 HB TR87 TR88 Main Drive Hydrostatic $455 HB TX66 TX68 Feeder Drive $190 HB TX66 TX68 Rotary Separator Drive $60 HBD8NN10C318AA TR88 TR89 TR98 TR99 Air Conditioner Compressor $28 HB TR88 Rotary Screen Drive $35 HB TR95 TR96 TR97 TR98 Clean Grain Elevator Drive (Also ) $70 HB191288C2 TR70 TR75 TR85 TR86 TR87 TR88 Clean Grain Elevator Drive $77 HB TR86 TR87 TR88 TR89 Tr97 Tr98 TR99 Feeder Drive $380 HB TR89 TR95 TR96 Tr97 Tr98 TR99 Shaker Shoe Drive $160 HB TR89 TR95 TR96 Tr97 Tr98,TR99 Straw Spreader Drive $88 HB TR89 TR95 TR96 Tr97 Tr98 TR99 Unloading Auger Drive (Also ) $88 Massey Ferguson HB227455M Jackshaft Drive, Spreader & Grain Elevator Drive $65 HB W Return Elevator Drive $35 HB W Fan Drive - Varispeed $130 HB above S/N BHC above S/N BHC07101 Fan & Alternator $59 HB W above S/N V51101 Beater Drive $255 HB Chopper Drive $150 HB531603M before S/N MJ87101 and above S/N V51101 Air Cond Compressor Drive $20 HB above S/N MJ Air Cond Compressor Drive $16 HB111677W before S/N MJ87101 and above S/N V51101 Alternator & Fan Drive $48 HB above S/N HUC8101 Alternator & Fan Drive $110 HBV Alternator & Fan Drive $105 HB Alternator & Fan Drive $59 HB before S/N MJ above S/N V Countershaft Drive $210 HB108190W above S/N V51101 Feeder Drive (3 Banded) $375 HB above S/N W55101-HL87999 Feeder Drive (4 Banded-209 Belt Length) $385 HB111954W Rotor Pump Drive $220 HB before S/N HR Rotor Pump Drive $203 HB Rotary Screen $29 HB W Rotary Screen $30 HB104259W Rpm Engine Only) 8780 Rotary Screen $21 HB above S/N HP above S/N HSC8101 Feeder, Pivot Shaft $120 HB above S/N HUC8101 Feeder, Pivot Shaft $132 HB Countershaft, Main $190 HB Shaker Shoe Pitman $120 HB101102M Unloader Drive $175 HB Unloader Drive $130 HB above S/N HP above S/N HP36101 Beater, Feederhouse Jackshaft $ HB Aspirator Fan $ Prices exclude GST 69

70 Rubber & Canvas Seals & Curtains, Auger Spouts AGCO - GLEANER HPAC-0405 Single Spreader Curtain $200 Suits R42 R52 R62 above S/N R65 R72 above S/N R75 Original Part: HPAC-4603 Dual Spreader Curtain Left $125 Suits R62 above S/N R65 R72 above S/N R75 Original Part: HPAC-4598 Dual Spreader Curtain Right $220 Suits R62 above S/N R65 R72 above S/N R75 Original Part: Case-IH HPIHC-1089 Cleaning Shoe Door Shield $325 Suits Original Part: HPIHC-2639 Cleaning Shoe Door Shield $275 Suits Original Part: A4 HPIHC-8916 Side Curtain for Straw Spreader $55 Suits Original Part: C2 HPIHC-3211 Side Curtain for Straw & Chaff Spreader $65 Suits Original Part: A2 HPIHC-9170 Side Curtain when fitted with Factory Straw $130 and Chaff Spreader Kit Suits Original Part: HPIHC-0277 Straw Spreader Rubber Guard $92 Suits Original Part: A1 HPIHC-4419 Spreader Canvas Curtain $195 Suits Original Part: HPIHC-4248 Feederhouse Cover Seal - Top $30 Suits Original Part: R2 HPIHC-9332 Straw Chopper Rubber Seal $68 Suits Original Part: C4 HPIHC-4004 Straw & Chaff Spreader Rubber Seal $125 Suits Original Part: A2 HPIHC-4558 Straw & Chaff Spreader Rubber Seal $125 Suits Original Part: A2 HPIHC-4916 Rubber Damper Chaff Sreader $25 Suits Original Part: HPIHC-1543 Canvas Grain Pan Seal $34 Suits Original Part: HPIHC-6934 Canvas Grain Pan Seal $40 Suits Original Part: HPIHC-3488 Unloading Auger Spout $115 Suits Original Part: A1 HPIHC-1176 Ladder - Bottom Step Rubber Support $80 Suits Original Part: JOHN DEERE HPJD-8305 Limit Curtain Beater $15 Suits Original Part: R26413 HPJD-0556 Isolater Seal Feeder House $55 Suits 9650STS 9750STS 9660STS 9760STS 9860STS 9770STS 9870STS S660 S670 S680 S690 Original Part: H HPJD-4853 Flap-Air Chute Straw Chopper $55 Suits 9650STS 9750STS 9660STS 9760STS 9670STS 9770STS 9870STS Original Part: H HPJD-7528 Seal - Straw Chopper Hood $45 Suits 9650STS 9750STS 9660STS 9760STS 9670STS 9770STS 9870STS Original Part: H HPJD-9780 Unloading Auger Spout $115 Suits STS 9750STS CTS CTSII Original Part: H HPJD-8234 Unloading Auger Spout $70 Suits 9660STS 9760STS 9860STS 9670STS 9770STS 9870STS s660 s670 S680 s690 Original Part: H HPJD-6126 Hanger - Lower Step $105 Suits CTS CTSII 9650STS 9750STS 9660STS 9760STS 9860STS 9670STS 9770STS 9870STS Original Part: H136126R HPIHC-6999 Straw Spreader Rubber Seal $80 Suits Original Part: C1 HPIHC-7000 Tailings Auger/Gate Seal $175 Suits Original Part: C2 70 Prices exclude GST

71 Case-IH Auger Elevator and Grain Tank Parts AIHCC60 Unloading Auger Elbow $1375 Suits Original Part: A C A2 Heavy Duty 1 thick ring welded seam 10 Bolt mount HPIHC-9463 Output Shaft Lower Grain Tank $150 Unloading Auger Suits Original Part: C1 hpihc-2945 Sprocket Grain Elevator Drive $140 25/30 Teeth 1¼ Bore Suits Original Part: A1 HPIHC-9462 Lower Grain Tank Auger Input Shaft $100 Suits Original Part: C1 HPIHC-7260 Upper Unloading Gearbox Pinion $225 Suits Original Part: C1 HPIHC-7859 Bearing Support Unloading Auger $80 Suits Original Part: C1 LAIVU-1640 Vertical Unloading Auger 50 long $550 Splined both ends Suits Original Part: C LAIVU-8010 Vertical Unloading Auger 47¼ long $950 Suits Original Part: HPIHC-8307 Vertical Unloading Auger $920 Grain Tank Tube Suits Original Part: A C1 LAIHU Horizontal Unloading Outer Auger 125½ long $930 Split suits two piece Has hex end to couple with Front Auger (Total Auger 208 ) Suits Original Part: A A C9 LAIHUP-1680 Hex Connector 6 long $35 Suits 2 piece Augers 1660 to 2388 inclusive Original Part: A2 LAIHU Horizontal Unloading Inner Auger 92 long $900 Split suits two piece (172 or 208 Total) 19 Splined Drive End Suits Original Part: A C A1 LAIHU Horizontal Unloading Outer Auger 89¼ long $725 Split suits two piece Has hex end to couple with Front Auger (Total Auger 172 ) Suits Original Part: C2 HPIHC-9509 Auger, Horizontal Unloading 17Ft 8 long $2250 Suits Original Part: HPIHC-7899 Unloading Auger Tube-Rear 119 long $1070 Suits Original Part: C4 HPIHC-7738 Unloading Auger Tube-Front 90 long $1050 Suits Original Part: C1 HPIHC-7783 Unloading Auger Tube - Outer 82½ long $850 Suits Original Part: C5 HPIHC-2623 Unloading Auger Extension Bearing Holder $52 Suits Original Part: HPIHC-0158 Horizontal Unloading Auger Tube 18 Ft. $2530 Suits AFX8010 Original Part: HPIHC-0339 Auger; Horizontal Unloading, 18 Ft long $1800 Suits Original Part: HPIHC-9121 Pulley, Unloading Auger Drive $135 Suits Original Part: HPIHC-5223 Unloading Auger Extension 3ft long $925 Suits Original Part: HPIHC-0154 Tube; Unloading Auger Extension, 3 Ft. $975 Suits AFX8010 Original Part: LAIC-1640 Clean Grain Auger 681/₄ long $330 7 Od Flight, 1¼ shaft Suits Original Part: C3 LAIC-1680 Clean Grain Auger 76 long $440 7 Od Flight, 1¼ Shaft Suits Original Part: C C1 LAIC-2188 Clean Grain Auger 76 long $475 13/8 Shaft Suits Original Part: A A1 LAIC-8010 Clean Grain Auger 1003/8 long $800 Suits Original Part: HPIHC-9374 Clean Grain Auger Trough $300 Suits Original Part: C Prices exclude GST 71

72 Case-IH Auger Elevator and Grain Tank Parts continued HPIHC-7452 Clamp - Auger Trough $120 Suits Original Part: C1 NEW LAID-2344C Inclined loading Auger 47¼ long $850 Split flight for monitor on AFS (16 Spline) Suits Original Part: A A4 LAID-1660 Inclined Loading Auger 47¼ long $645 No split in Flighting Suits Original Part: C A2 HPIHC-3272 Auger, Bubble Up; 72½ long $975 Suits Original Part: LAID-1644 Loading Auger 79 long $450 Suits Original Part: C3 HPIHC-9492 Sprocket, Bubble Up Auger; Driven 26 Tooth $60 Suits Original Part: HPIHC-3275 Auger, Bubble Up $850 Suits Original Part: LAIR-1480 Return Grain Auger 85½ long, 11/₈ Shaft $300 Suits Original Part: C2 LAIR-2166 Return Grain Auger 62½ long $400 Suits Original Part: A2 LAIR-2188 Return Grain Auger 85½ long $480 Suits Original Part: A2 LAIR-8010 Return Grain Auger 98¼ long $1050 Suits Original Part: LAIR-8010A Auger, Tailings 88 long $1250 Suits Original Part: LAIB-1440 Auger Grain Tank bottom /8 long $775 Suits Original Part: C LAIB-8010 Auger Grain Tank Front /8 long $800 Suits Original Part: LAIB-8010R Auger - Grain Tank Bottom Rear 1207/8 long $825 Suits Original Part: LAIT-1440 Return Grain Auger Upper Delivery /8 $280 Suits Original Part: C1 LAIT-1480 Return Grain Auger Upper Delivery - 375/8 $320 Suits Original Part: C HPIHC-9229 Auger Grain Bed 783/8 long, 7 /8 Hex Shaft $325 Suits Left Hand Rotation Original Part: C1 HPIHC-8541 Auger Grain Bed 783/8 long, 7 /8 Hex Shaft $260 Suits Right Hand Rotation Original Part: C1 HPIHC-3414 Bearing Block-Wooden Shoe Supply $20 Suits Original Part: B C2 HPIHC-1677 Bevel Gear 14 Tooth 11/8 Hex $34 Fits Driving Shaft - Auger Bed Suits Original Part: C HPIHC-4194 Bevel Gear 14 Tooth 7 /8 Hex $38 Fits Auger Grain Bed Suits Original Part: C C TLIHC-1660T Grain Tank Loading Tube Upper $175 Suits Original Part: C3 TLIHC-1660B Grain Tank Loading Tube Bottom $195 Suits Original Part: C2 TLIHC-16601B Trough - Clean Grain Auger Tube 35 long $195 (with Monitor Window) Suits Original Part: A2 TLIHC-16602B Guard - Lower Grain Elevator Head $675 Suits below S/N and above S/N above S/N above S/N Original Part: A1 HPIHC-2475 Unloading Auger Housing Lower $1350 Suits Original Part: C C1 HPIHC-8584 Clean Grain Elevator Boot (Inner) $125 Suits Original Part: C2 HPIHC-7437 Elevator Boot - Rear Cover $75 Suits Original Part: C1 HPIHC-6175 Clean Grain Elevator Boot (Outer) $70 Suits without Yield Monitor (AFS) Original Part: A2 72 Prices exclude GST

73 Case-IH Auger Elevator and Grain Tank Parts continued HPIHC-8585 Clean Grain Elevator Boot (Side Outer) $110 Suits Original Part: C3 HPIHC-3237 Clean Grain Elevator Boot (Outer) $80 Suits with Yield Monitor (AFS) Original Part: A1 NEW HPIHC-2018 Wooden Chain Tension $10 Block Grain Elevator Drive Suits Original Part: R1 HPIHC-9247 Clean and Return Grain Elevator $200 Drive Shaft 24 1 /8 long Suits Original Part: C1 HPIHC-3680 Shaft, Clean Grain Elevator, Upper $250 Suits Original Part: HPIHC-7062 Shaft, Tailings Processor; Upper Blower Drive $85 Suits Original Part: HPIHC-8377 Sprocket, Elevator Head, Driven 37 Tooth $170 Suits Original Part: HPIHC-3101 Sprocket, Upper Clean Grain Elevator 15 Teeth $45 Suits Original Part: HPIHC-3695 Sprocket, Upper Clean Grain Elevator 23 Tooth $72 Suits Original Part: HPIHC-1456 Sprocket, Upper Clean Grain Elevator 17 Tooth $40 Suits Original Part: HPIHC-1552E Support Front Grain Elevator Head $75 Suits Original Part: C2 HPIHC-1097 Cover, Auger Grain Elevator Head $65 Suits Original Part: C2 HPIHC-9213 Cover, Elevator Head Top $365 Suits Original Part: HPIHC-1154 Panel Right Hand Grain Elevator Head $90 Suits Original Part: C1 HPIHC-1458 Plate Right Hand Grain Elevator Head $170 Suits Extended Wear Version Original Part: A1 HPIHC-1060 HPIHC-9134 Auger Mounting Support for Grain Elevator Head $100 Suits Original Part: C1 Support Auger Bearing for Grain Elevator Head $100 Suits Original Part: C1 HPIHC-1095 Panel Right Hand Grain Elevator Head $82 Suits Original Part: C1 HPIHC-1497 Panel Left Hand Grain Elevator Head $95 Suits Original Part: C1 HPIHC-9940 Cover Rear Grain Elevator Head $85 Suits Original Part: C1 HPIHC-1284 Plate Grain Elevator Head $105 Suits Original Part: C HPIHC-1550 Panel Rear Support Grain Elevator Head $95 Suits Original Part: C2 HPIHC-7439 Cover Front Grain Elevator Boot $85 Suits Original Part: C1 HPIHC-7276 Clean Grain Elevator Door $135 Suits Original Part: C1 HPIHC-7430 Clean Grain Elevator Door $90 Suits Original Part: C1 HPIHC-2183 Door, Clean Grain Elevator $420 Suits Original Part: HPIHC-1114 Shaft Upper Unloading Auger Gearbox $495 Suits Original Part: HPIHC-3219 Shaft Lower Unloading Auger Gearbox $ /16 long, 8/21 Teeth Suits Original Part: HPIHC-5830 Shaft Unloading Drive $140 Suits Original Part: replaces HPIHC-0515 Boot Lower Clean Grain Elevator $750 Suits Original Part: replaces Prices exclude GST 73

74 Case-IH Auger Elevator and Grain Tank Parts continued HPIHC-8178 Shaft Grain Elevator Head 1513/16 long $120 Suits Original Part: HPIHC-6252 Boot Tailing Elevator $330 Suits Original Part: A2 HPIHC-5185 Shaft Clean Grain and Tailings 26 7 /8 long $286 Elevator Suits Original Part: A1 HPIHC-3531 Shaft Jackshaft Drive $600 Suits 2344 before S/N bfore S/N before S/N Original Part: A1 HPIHC-3325 Pulley Elevator Jackshaft Drive $255 Suits Original Part: C1 HPIHC-7888 Shaft - Unloader Gearbox $1500 Suits Original Part: Chaffer & Sieve Area Parts GPIHC-1440 Upper Grain Pan $215 Suits Original Part: C1 GPIHC-1480 Upper Grain Pan $260 Suits Original Part: C1 HPIHC-2156 Chaffer Pan Support $210 Suits Original Part: C1 HPIHC-1723 Arm Hanger (Front) Shoe $140 Suits Original Part: C HPIHC-1724 Arm Hanger (Rear) Chaffer $225 Suits Original Part: C HPIHC-0613 Shaft Shaker Shoe Drive $675 Suits Original Part: HPIHC-7184 Shaft Shaker Shoe Drive $50 Suits Original Part: HPIHC-9072 Rubber Bush Upper Shoe Drive $50 Suits Original Part: HPIHC-9251 Pitman Assembly Shaker Shaft $295 Suits Original Part: C HPIHC-7702 Arm, Shaker Shoe Drive $370 Suits Original Part: HPIHC-2616 Shaft Auger Drive 74 long $600 Suits Original Part: C2 HPIHC-2574 Cam Shaker Shaft - Left Hand $260 Suits Original Part: C1 HPIHC-2574 Cam Shaker Shaft - Right Hand $260 Suits Original Part: C1 HPIHC-2561 Arm Lower Shaker Shoe $105 Suits Original Part: HPIHC-4041 Arm Upper Shaker Shoe $115 Suits (278mm centre to centre - pins) Original Part: HPIHC-1082 Bushing, Shoe Arm, Upper $110 Suits Original Part: HPIHC-0474 Housing, Bearing; Shaker Shoe Drive $105 Suits Original Part: HPIHC-6877 Housing, Bearing; Shoe Drive, Upper $18 Suits Original Part: HPIHC-0033 Housing, Shaker Shoe (2 Halves required) $18 ea Suits Original Part: HPIHC-4571 Arm Upper Shoe Drive Left hand $210 Suits Original Part: HPIHC-4573 Arm Upper Shoe Drive Right hand $210 Suits Original Part: HPIHC-2651 Bushing Upper Shaker Shoe $10 Suits Original Part: HPIHC-8222 Bushing Upper Shaker Shoe 21mm Hole $5 Suits Original Part: HPIHC-9232 Bushing Cleaning Shoe Pivot Frame $15 Suits Original Part: HPIHC-4817 Roller -Cleaning Shoe Pivot Frame $38 Suits Original Part: HPIHC-7503 Shoe, Shaker Frame $2300 Suits AFX 8010, 8010 Original Part: Prices exclude GST

75 Case-IH Chaffer & Sieve Area Parts continued HPIHC-1650 Shoe, Shaker, Upper, Wide Frame $2750 Suits Original Part: HPNH-7335 Shoe, Upper Shaker; Narrow $2400 Suits 7010 Original Part: HPIHC-1928 Shaft - Cleaning Shoe Pivot Frame 89/32 long $95 Suits Original Part: HPIHC-4452 Support, Upper Shoe Drive (LH) $75 Suits Original Part: HPIHC-4453 Support - Upper Shoe Drive (RH) $75 Suits Original Part: HPIHC-0470 Support, Upper Shoe Drive (LH) $210 Suits Original Part: HPIHC-0472 Support, Upper Shoe Drive (RH) $210 Suits Original Part: HPIHC-9900 Support Left Hand Shoe Side $700 Suits Original Part: C5 HPIHC-9901 Support Right Hand Shoe Side $700 Suits Original Part: C5 HPIHC-9206 Rail Chaffer Left Hand $575 Suits Original Part: C1 HPIHC-9207 Rail Chaffer Right Hand $575 Suits Original Part: C1 HPIHC-2452 Rail Chaffer Left Hand $600 Suits Original Part: C2 HPIHC-2453 Rail Chaffer Right Hand $600 Suits Original Part: C CBIHC-1644 Chaffer Drive Hanger Bush (Set of 4) $170 set Suits Original Part: replaces C replaces C1 Contains Qty Qty HPNH-1540 Bush Grain Tray and Shaker Shoe $4 ea Suits CBIHC Shoe Drive Arm Bush (Set of 4) $110 set Suits Original Part: replaces c1 Contains Qty CBIHC Chaffer Drive Arm Bush (Set of 12) $360 set Suits Original Part: replaces c2 and replaces C1 Contains Qty Qty CBIHC1400 Chaffer Drive Hanger Arm Bushing (Set of 6) $125 Suits short sieve model Original Part: C1 Contains Qty C1 CBIHC Chaffer Frame Bushing $12 ea Suits short sieve model Original Part: R91 CBIHC Shoe Sieve Hanger Arm Bushing (Set of 12) $180 Suits short sieve model Original Part: R C1 Contains Qty R91 Qty C1 HPIHC-2886 Shaft Beater Drive $990 Suits Original Part: HPIHC-4194 Bevel Gear Straw Spreader 14 Tooth 7 /8 Hex $38 Suits (Qty 4 per machine) Original Part: C C HPIHC-4194B Bearing 7 /8 Hex Bore for Bevel Gear $46 Suits HPIHC-7402 Sprocket Unloader Drive Lower 33/57 tooth $150 Suits Original Part: C1 HPIHC-9795 Sprocket Driven Unloading Drive 25 Tooth $90 Suits Original Part: HPIHC-7639 Sprocket Idler Unloading Drive 15 Tooth $50 Suits Original Part: HPIHC-9770 Sprocket Unloading Drive 25 Tooth $75 Suits Original Part: HPIHC-9777 Sprocket Unloading Drive 38 Tooth $85 Suits Original Part: Engine Parts TPIHC-243 Water Pump 400 Series Motors $250 Suits Suits 400 Series Navistar Engine 1 shaft on pump Original Part: C C93 TPIHC-780 Water Pump 17mm shaft $150 The hub of the original pump will need to be fitted to this replacement pump. Suits with DT Engines Original Part: R R Prices exclude GST 75

76 Case-IH Engine Parts continued TPIHC-1263 Water Pump 24mm Shaft $225 Suits with D358 Original Part: R94 TPCA-1443 Water Pump $195 Suits with 5.9 Litre Engine (Cummins) Original Part: J A77703 J TPCA-1444 Water Pump 95mm Impellor $195 Suits with 8.3 Litre Engine (Cummins) Original Part: J A77704 J HPIHC-2491 Water Pump $250 Suits 8010 AFX Original Part: HPIHC-1179 Radiator $ Row Core 5 Fins/inch Suits with International Engine Original Part: A HPIHC-1730 Radiator $ Row Core 5 Fins/inch Suits to S/N Original Part: A C3 HPIHC-4951 Radiator $ Row Core 5 Fins/inch Suits 2188 above S/N below S/N below S/N Original Part: A1 HPIHC-5361 Radiator $6300 Suits 2388 above S/N Row Core 5 Fins/inch Original Part: A3 Engine Output Drive Parts HPIHC-8848 Rotor Drive Pulley Stationary $695 Suits Original Part: C1 HPIHC-0054 Rotor Drive Pulley Variable $980 Suits Original Part: C1 HPIHC-287 Main PTO Drive Shaft 16¼ long $550 Suits Original Part: C C2 HPIHC-4429 PTO Drive Plate 137/8 $300 Suits 1620 above S/N above S/N above S/N above S/N Original Part: C2 TPIHC-1446 PTO Drive Plate 14 $300 Suits below S/N below S/N below S/N below S/N Original Part: C91 Feeder House Parts HPIHC-1440 Top Feeder House Shaft 68 long $260 Suits below S/N Original Part: C4 HPIHC-652 Top Feeder House Shaft 573/8 long $275 Suits Original Part: C2 HPIHC-653 HPIHC653 Top Feeder House Shaft 65 1 /4 long $195 Suits 1480 (without Rock Trap) Original Part: C1 HPIHC-7208 Feeder House Drum Shaft 45 long $115 Suits Original Part: C2 HPIHC-0160 Top Feeder House Shaft 61 7 /8 $245 Suits Original Part: C4 HPIHC-6024 Shaft for Feeder Roller 53³/16 $490 Suits 7010 above S/N above S/N Original Part: HPIHC-1931 Shaft Feeder House Lower 70¹/16 long $525 Suits with Electric Reverser Original Part: A A A1 HPIHC-8771 Shaft-Feeder House Lower - 70 long $470 Suits with Hydraulic Reverser Original Part: A1 HPIHC-9071 HPIHC653 Top Feeder House Shaft - 691/8 long $400 Suits above S/N Above S/N above S/N Original Part: A1 HPIHC-1452 Pulley, Jackshaft Drive Feeder House $ Spline Centre 15 Outside Diameter Suits above S/N below S/N below S/N Original Part: C2 HPIHC-8967 Pulley, Jackshaft Drive, Feeder House $400 6 Spline Centre Outside Diamater Suits 2144 above S/N above S/N above S/N above S/N Original Part: A C2 HPIHC-8288 Feeder House Drum Arm Right Hand $ /8 long Suits Original Part: C3 HPIHC-8287 Feeder House Drum Arm Left Hand $195 Suits Original Part: C3 HPIHC-4574 Feeder House Bottom 60 long $925 Suits Original Part: C2 HPIHC-4576 Feeder House Bottom 43½ long $595 Suits Original Part: HPIHC-4578 Feeder House Bottom - 51¼ long $525 Suits Original Part: C2 76 Prices exclude GST

77 Case-IH Feeder House Parts continued HPIHC-4217F Feeder House Bottom - 60 long $750 Suits Original Part: C2 HPIHC-0379 Floor, Feeder House; Front $1250 Suits Original Part: HPIHC-0307 Floor, Feeder House; Rear - No Rock Trap $700 Suits Original Part: HPIHC-2537 Floor, Feeder House; Centre $825 Suits Original Part: HPIHC-2275 Rock Trap Door Kit $395 Suits Original Part: A1 HPIHC-2449 Arm for Feeder Roller $210 Suits Original Part: HPIHC-1396 Shaft Input, Feeder Drive Forward 1415/16 $510 10/42 Spline Suits 1440 to 2388 inclusive Original Part: C1 HPIHC-2003 Shaft, Feed Conveyor $695 Suits Original Part: HPIHC-6812 Shaft, Rock Trap Friction Slip Clutch $475 Suits Original Part: HPIHC-5927 Feeder Reverser - Electric $595 Suits Original Part: C9 HPIHC-4200 Bracket, Feeder Roller Tension Adjustment $40 Suits Original Part: HPIHC-5251 Bracket, Feeder Roller Tension Adjusting $13 Suits Original Part: HPIHC-8126 Rod, Feeder Roller Tension Adjusting $28 Suits Original Part: Hydraulic Parts HPIHC-2488 Hydraulic Cylinder Auger unloading $800 Suits Original Part: C92 HPIHC-7241 Hydraulic Cylinder Auger unloading $600 Suits Original Part: HPIHC-6482E Hub Auxillary Hydraulic Pump Drive $495 Extended Spline & Greasable 3 Bolt Hole Suits 1420 to 2388 inclusive Original Part: C HPIHC-6482 Hub Auxillary Hydraulic Pump Drive $450 Greasable Standard Spline 3 Bolt Hole Suits 1420 to 2388 inclusive Original Part: C HPIHC-5084 Hub Auxillary Hydraulic Pump Drive $500 Greasable - Std Spline 4 Bolt Hole Suits Original Part: HPIHC-0136 Hydrostat Pump Shaft $450 Suits Before S/N Original Part: C1 Rotor Parts CCIHC-20W Rotor Cone Heavy Duty (including Vanes) $2250 Suits Original Part: C CCIHC-19W Rotor Cone Heavy Duty (including Vanes) $2600 Suits Original Part: A C2 CCIHC-84W Rotor Cone Heavy Duty (including Vanes) $2600 Suits Original Part: A1 CCIHC-B Kit to install above 3 $175 Rotor Cone. Contains Starwashers, Button Head Cap Screws, Hex Flange Nuts, Flange Hex Bolts, Flange Locknuts CCIHC-8010W Rotor Cone (including Vanes) $3300 Suits AFX8010 above S/N Build Date 9/06 to 9/08 Original Part: HPIHC-7350 Deflector, Transition Cone (LH) $700 Suits Original Part: HPIHC Deflector, Transition Cone (RH) $900 Suits Original Part: Vanes-20W Complete Vane Set $250 Suits Vanes-19W Complete Vane Set $350 Suits Original Part: A Vanes-84W Complete Vane Set $430 Suits Original Part: A2 HPIHC-8773 Kit, Rotor Cone Vane (Stainless Steel) $695 Suits Original Part: Prices exclude GST 77

78 Case-IH Rotor Parts continued CPVK Vane Transport Vane Kit 3/16 $325 Suits Original Part: B CPVK Vane Transport Vane Kit 3/16 $450 Suits Original Part: HPIHC-1297 Rotor Cage Vane Transport $2450 Suits Original Part: HPIHC-4489 Hub Rotor Drive $900 11¾ long, 20 teeth, 13 spline Suits most 1620 to 2388 (check size) Original Part: C C C1 HPIHC-3439 Rotor Front Bearing Housing $330 Suits 1420 to 2388 inclusive 2388 up to S/N and above S/N Original Part: A HPIHC-1545 Rotor Front Shaft $600 Suits 1420 to 2388 inclusive 2388 up to S/N and above S/N Original Part: C2 HPIHC-1546 Rotor Impellor $700 Suits Original Part: C2 HPIHC-5598 Shield, Rotor Impeller $9 Suits Original Part: HPIHC-8846 Hub Assembly Rotor Drive Pulley $695 17/64 Bore, 12 Spline Suits 1620 to 2388 inclusive Original Part: C C HPIHC-1453 Hub Rotor Drive Pulley $575 Suits above S/N Original Part: HPIHC-5307 Rotor Drive Coupling $375 Suits Original Part: C1 HPIHC-1542 Coupling Splined U Joint Separator Drive $225 Suits upto S/N Original Part: C2 HPIHC-2570 Shaft, Rotor Gearbox $310 Suits Original Part: HPIHC-1748 Separator Pulley - 4 Track $410 Driven 14¾ OD Suits all without straw Chopper Original Part: A2 Steering TPIHC-201 Stub Axle Heavy Duty $340 Suits Original Part: 71785C C2 HPIHC-9293 Wheel Hub $300 Suits upto S/N Original Part: C11 HPNH-881 Power Steering Cylinder End $170 Suits Fits power steering cylinder outer ends Original Part: HPIHC-2201 Rim Rear Axle $650 Suits Original Part: A2 HPIHC-5374 Stub Axle $790 Suits 1420 to 2366 inclusive Original Part: C2 HPIHC-3911 Steering Arm Left $225 Suits 1420 to 2366 inclusive Original Part: C4 HPIHC-3912 Steering Arm Right $225 Suits 1420 to 2366 inclusive Original Part: C3 HPIHC-6140 Steering Cylinder Ball Joint $195 Rear Wheel Assist Only Suits 1440 to 2388 inclusive Original Part: C91 HPIHC-6796 Steering Cylinder Ball Joint $75 Suits 1440 to 2366 inclusive - Not Rear Wheel Assist Original Part: C1 HPIHC-9774 Tie Rod Left Hand 45½ long 9 Holes $250 Suits1460 to 2388 inclusive Original Part: A1 Transmission and Final Drive Parts FD Re-Manufactured Final Drive $ Tooth Bull Gear Suits If no exchange add $ to price $1000 refunded on return of used Final Drive Original Part: C1 FD Re-Manufactured Final Drive $ Tooth Bull Gear Suits 1680 & 1480 If no exchange add $ to price $1000 refunded on return of used Final Drive Original Part: 92770C92 FD2188HD Re-Manufactured Final Drive $6500 Heavy Duty 2 Thick Pilot 73 Tooth Suits 2344 Above S/N above No above No If no exchange add $ to price $1000 refunded on return of used Final Drive Original Part: C3 HPIHC-245 Drive Axle Coupling with Grease Nipple $120 Suits (with 3/₈ Hole) Original Part:184342C R2 HPIHC-246 Drive Axle Coupling with Grease Nipple $70 12 Spline 23/16 Suits 1460 to 2188 inc lusive Original Part: C R1 78 Prices exclude GST

79 Case-IH Transmission and Final Drive Parts continued HPIHC-8982 Coupling Planetary Drive $ Spline 1¾ Suits Original Part: HPIHC-1549 Drive Axle Coupling with Grease Nipple $ Spline 23/16 Suits Original Part: A1 HPIHC-811 Axle Drive Shaft 273/64 long $315 Suits 1460 above S/N (Left Hand Side) on Left Hand Side Original Part: C1 HPIHC-812 Axle Drive Shaft 143/32 long $290 Suits 1460 above S/N 32001(Right Hand Side) on Right Hand Side Original Part: R2 HPIHC-813 Axle Drive Shaft 321/64 long $200 Suits 1480 before S/N Left Hand or Right Hand Original Part: C1 HPIHC-846 Axle Drive Shaft 29½ long $550 Left & Right Clamp Type Suits Original Part: A1 HPIHC-0985 Axle Drive Shaft 34 long Left Hand $ Spline 1¾ Suits AFX with 138mm Axle Extension Original Part: HPIHC-0991 Axle Drive Shaft 41 5 /8 long Right Hand $ Spline 1¾ Suits AFX Original Part: HPIHC-0162 Axle Drive Shaft 261/8 long Left Hand $ Spline 1¾ Suits Original Part: HPIHC-0165 Axle Drive Shaft 363/8 long Right Hand $ Spline 1¾ Suits Original Part: HPIHC-0951 Axle Drive Shaft 38½ long Left Hand $ Spline 1¾ Suits Original Part: HPIHC-0957 Axle Drive Shaft 48¾ long Left Hand $ Spline 1¾ Suits Original Part: HPIHC-0974 Axle Drive Shaft 46¾ long Right Hand $ Spline 1¾ Suits Original Part: HPIHC-5290 Final Drive Pinion $460 Suits Original Part: A1 HPNH-9419 Planetary End Reduction Pinion $ /16 long, 23 Spline, 11 Teeth Suits Original Part: HPIHC-9688 Shaft Differential With Lock $ /32 long, 22 and 8 Spline Suits Original Part: HPIHC nd & 3rd Sliding Gear 46 teeth 26/19 spline $420 Suits Original Part: R1 HPIHC-1548 Gear Spool 59, 39 and 27 teeth $975 Suits Original Part: R1 HPIHC-6378 Shaft Brake Output 167/8 long $600 Suits Original Part: A1 HPIHC-0169 Hydro Input Shaft 13 7 /16 long $ and 21 Spline Suits Original Part: C1 HPIHC-4217 Transmission Shaft Input 26 Tooth $545 Suits 2144 to 2388 inclusive with A1 or A1 Transmission Original Part: C1 HPIHC-6882 Shaft Propulsion Drive $1050 Suits AFX Original Part: HPIHC-9687 Shaft, Transmission Output $275 Suits Original Part: HPIHC-3149 Hydrostat Pump Shaft $495 Suits Original Part: A1 Wind Fan Parts HPIHC-1177 Fan Vari-sheave Inner (on fan shaft) 12 $220 Suits Adjustable Half Original Part: C C93 HPIHC-1178 Fan Vari-sheave Outer (on fan shaft) 12 $220 Suits Fixed Half Original Part: C1 HPIHC-4853 Shaft-Elevator and Fan Drive 10 long $125 Suits 1420 to 2388 inclusive Original Part: C3 HPIHC-1552 Sheave Cleaning Inner on fan shaft 12 $325 Suits Original Part: C HPIHC-1553 Sheave Cleaning Outer on Fan Shaft 12 $250 Suits Original Part: C2 HPIHC-3333 Fan Drive Hub Fixed Pulley $160 Suits 1420 to 2388 inclusive Original Part: C1 HPIHC-1141 Upper Sheave 330mm Diameter $165 Fan Varispeed Suits Original Part: A2 HPIHC-3288 Sheave Fan Variator 11¾ Diameter $75 Suits 1420 to 2388 inclusive 300mm diameter Original Part: C1 HPIHC-9410 Shaft Cleaning Fan 57 long $875 Suits Original Part: Prices exclude GST 79

80 Case-IH Wind Fan Parts continued HPIHC-9411 Shaft Cleaning Fan 67½ long $995 Suits Original Part: HPIHC-3948 Pulley Fan Drive 101/8 OD $140 Suits 1420 to 2388 inclusive Original Part: C1 HPIHC-5918 Pulley Fan Jackshaft 14 OD $120 Suits Original Part: A1 HPIHC-5286 Hub Assembly Fan Drive $210 Suits 1420 to 2388 inclusive Original Part: C91 HPIHC-1551 Bushing Cleaning Fan Drive Pulley $27 Suits 1640 to 2388 inclusive Original Part: C1 HPIHC-8215 Cleaning Fan Thrust Bearing $75 Suits 1640 to 2388 inclusive Original Part: C92 HPIHC-7001 Fan Blade 725mm $20 Suits Original Part: C1 HPIHC-7034 Fan Blade 765mm $32 Suits Original Part: General NEW NEW TP-542 Fan Motor Reversible 3 Speed $230 5/16 Double Shaft 12 volt Suits 1420 to 1480 inclusive Original Part: C C3 HPIHC-5190 Cab Fan Assembly $390 (includes Impellors & Motor) Suits Original Part: A C HPIHC-7380 Blower Assembly, Cab Pressurizer $300 Suits Original Part: A1 HPIHC-5435 Flange Assembly, Fan Drive $50 Suits Original Part: HPIHC-0293 Gas Strut Left Cab Door $60 Suits Original Part: HPIHC-8531 Gas Strut Rear Upper Panel Left & Right $65 Suits AFX Original Part: HPIHC-2613 Idler Pulley 7 Diameter $55 Suits 1620 to 2388 inclusive Original Part: AG2613A R1 LACNHSP12 Sieve Adjuster Linear Actuator $1250 Suits Original Part: HPNH-2008 Linear Actuator Sieve Levelling $2000 Suits Original Part: Genuine HPIHC-2685 Wobble Box - Oil Bath $2200 Suits 1010 and 1020 Fronts Original Part: HPIHC-0164 Table Auger Drive Sprocket $200 Suits Rigid Fronts Original Part: LAN Hex Coupler - 115mm long 11/8 Hex $120 Suits 810 Fronts HPIHC-3585 Clutch, A/C Compressor $380 Suits Original Part: A1 HPIHC-3463 A/C Compressor with Clutch $770 Suits Original Part: A2 HPIHC-0052 Glass, Door (LH) $420 Suits Original Part: HPIHC-6692 Knife, Straw Chopper Stationary $6.50 ea Suits Original Part: HPIHC-9803 Plate, Friction Unloader Drive Pto Clutch $25 ea Unloader PTO, Feeder Gearbox, Beater/Chopper PTO Suits Original Part: A1 HPIHC-6805 Plate, Friction Clutch Feeder House $55 Suits Original Part: HPIHC-6806 Plate, Internal Separator; Friction Clutch $110 Suits Original Part: HPIHC-0276 Disc, Friction Transmission & PTO $14 Suits Original Part: HPIHC-5335 Plate, Separator $14 Unloader PTO, Feeder Gearbox, Beater Chopper PTO Suits Original Part: A2 HPIHC-80S00F Separator Plate 7 Diameter 2.4mm Thick $75 Trans Clutch Pack for Rotor Variator or Header/Feeder Suits Original Part: S2080s00f HPIHC-90S00F Separator Plate 7 Diameter 2.1mm Thick $75 Trans Clutch Pack for Rotor Variator or Header/Feeder Suits Original Part: S2090s00f HPIHC-8370 Ratchet, Slip Clutch $55 Suits Original Part: C2 HPIHC-5006 Reciever / Drier $72 Suits Original Part: A1 80 Prices exclude GST

81 John Deere Auger and Elevator Parts LAJVU-6620D Vertical Unloading Auger 63¾ long $800 Suits (including T2 Models) Includes Splined Hubs & Double Flight Original Part: AH LAJVU-9400D Vertical Unloading Auger 433/8 long $750 Suits CTS CTSII Includes Splined Hubs & Double Flight Original Part: AH LAJVU-9650D Vertical Unloading Auger 30¼ long $750 Suits 9650STS 9750STS 9660STS 9760STS 9670STS 9770STS 13 Flight Original Part: AH LAJVU-9660HUR Auger, Vertical Unloading HUR 31 5 / 8 long $1250 Suits High Unloading Rate STS Models Suits 9660STS 9670STS 9760STS 9770STS 9860STS 9870STS Original Part: Axe12921 AH LAJVU-660HUR Vertical Unloading Auger HUR $1350 Suits S660 S670 S680 S690 Original Part: Axe18070 LAJVU-660D Vertical Unloading Auger- STD Rate $995 Suits S660 Original Part: Axe17156 LAJL-7720 Bin Loading Auger 75 long $500 Suits T2 Original Part: AH LAJL-8820 Bin Loading Auger 76½ long $620 Suits T2 Original Part: AH HPJD-330 Bin Loading Auger Tube 62 5 /8 long $390 Suits (including T2 Models) Original Part: AH98300 LAJL9400-1H Bin Loading Auger 50 long $475 Suits CTS CTSII Original Part: AH LAJL9650H Bin Loading Auger 57 1 /8 long $900 Suits 9650STS 9750STS 9660STS 9760STS 9670STS 9770STS Original Part: AH AH AH LAJL-9770H Bin Loading Auger 57 long 11 Diameter $1100 Suits 9770STS 9870STS S670 Original Part: Ah Ah LAJL-9650HE Bin Loading Auger 65½ long $1050 Extended 12 over original Suits 9650STS 9750STS 9660STS 9760STS 9860STS Original Part: AH E HPJD-9650 Tube, Grain Tank Loading, 12 Extension $265 Suits 9650STS 9750STS 9760STS 9860STS Original Part: TLJDE9650 TLJD Bin Loading Auger Tube 22 1 /8 long $240 Suits CTS CTSII - 8¾ Int Diam Original Part: AH HPJD-9093 Loading Auger Tube 290mm Diameter $1025 Suits S660 above S/N S670 above S/N STS 9760STS 9860STS above S/N STS Original Part: Ah NEW HPJD-9094 Loading Auger Tube 275mm Diameter $950 Suits 9660STS 9760STS 9860STS 9670STS S660 S670 Original Part: Ah LAJA-9400 Grain Tank Cross Auger Front 112 long $720 Suits CTS CTSII 9650STS 9750STS 9660STS 9760STS 9670STS Original Part: AXE18077 AH LAJC-7720 Clean Grain Cross Auger 83½ long $350 Suits T2 Original Part: AH LAJC-8820 Clean Grain Cross Auger 94½ long $395 Suits 8820 T2 up to S/N Original Part: AH LAJC-8821 Clean Grain Cross Auger 96½ long $415 Suits 8820 T2 above S/N Original Part: AH LAJC-9400 Clean Grain Cross Auger 79½ long $475 Suits CTS CTSII Original Part: AH LAJC Clean Grain Cross Auger 92¼ long $525 Suits Original Part: AH AH LAJC-9450 Clean Grain Cross Auger 82 1 /8 long $650 Suits 9650STS 9750STS 9660STS 9760STS 9770STS 9860STS S670 Original Part: AH LAJC-9770 Clean Grain Cross Auger $750 Suits 9670STS 9770STS 9870STS S670 S680 S690 Original Part: AH HPJD-3897 Hand Hole Cover Auger $ 35 Suits Pickup Original Part: H HPJD-3898 Auger Cover Plate $20 Suits Pickup Original Part: H HPJD-9391 Door Assembly, Clean Grain + Extra Plate $370 Suits CTS CTSII STS 9750STS 9660STS 9760STS 9860STS 9770STS 9870STS Original Part: Ah HPJD-8426 Lower Clean Grain Elevator Door $150 Suits 9650STS 9750STS 9660STS 9760STS 9860STS 9670STS 9770STS 9870STS 9410 Original Part: Ah HPJD-9388 Clean Grain Auger Trough Door $365 Suits STS 9750STS 9660STS 9760STS 9860STS 9670STS 9770STS 9870STS Original Part: Ah LAJR Return Grain Cross Auger 106 long $395 Suits Original Part: AH LAJR-9650 Return Grain Cross Auger 71 7 /8 long $440 Suits 9650STS 9750STS 9660STS 9760STS 9860STS 9770STS 9870STS Original Part: AH LAIB-9650F Grain Tank Cross Auger Front - STD Rate $995 Suits CTS CTSII STS 9660STS 9750STS 9760STS S660 Original Part: Axe Prices exclude GST 81

82 John Deere Auger and Elevator Parts continued LAIB-9650R Grain Tank Cross Auger Rear - STD Rate $995 Suits CTS CTSII STS 9660STS 9750STS 9760STS S660 Original Part: Axe18078 LAIB-9660R Grain Tank Cross Auger Rear HUR 112 long $1325 Suits 9660STS 9760STS 9860STS 9670STS 9770STS 9870STS s660 s670 S680 s690 Original Part: AXE18082 Ah LAIB-9660F Front Cross Auger, High Unloading Rate $1350 Suits 9660STS 9760STS 9860STS 9670STS 9770STS 9870STS S660 S670 S680 S690 Original Part: Axe18081 AH HPJD-2578 Pulley, Driven; Clean Grain Elevator 13 OD $375 Suits 9770STS 9870STS Original Part: H HPJD-3040 Pulley, Slip Clutch; Tailing Elevator $295 Suits 9650STS 9750STS 9660STS 9760STS 9860STS 9670STS 9770STS 9870STS Original Part: Ah HPJD-8776 Shaft Drive Gear Case, Horizontal Auger $360 Suits 9660STS 9760STS 9860STS 9670STS 9770STS 9870STS Original Part: Ce18776 LAJT-9400 Return Grain Auger - Upper $ long 5 Diameter Suits CTS CTSII CTS 9660CTS Original Part: AH LAJT-9600 Return Grain Auger - Upper $375 71¾ long 4¾ Diameter Suits Original Part: AH LAJT-9650 Return Grain Auger Upper 28 long $225 Suits 9650STS 9750STS 9660STS 9760STS 9860STS 9670STS 9770STS 9870STS S660 S670 S680 S690 Original Part: Ah Ah LAJHU-1 Unloading Auger, Horizontal 95 long $1100 Suits 9660STS 9760STS 9860STS 9670STS 9770STS 9870STS S660 S670 S680 S690 Original Part: Ah LAJHU-2 Unloading Auger, Horizontal 164 long $1795 Suits 9660STS 9760STS 9860STS 9670STS 9770STS 9870STS S660 S670 S680 S690 ALL HUR Original Part: Ah HPJD-0023 Tube, Unloading Auger Outer 15Ft long $1850 Suits 9650STS 9750STS 9660STS 9760STS 9670STS 9770STS ALL HUR Original Part: Ah LAJHU-3 Unloading Auger Inner 83 long $995 Suits 9650STS 9750STS 9760STS 9770STS Original Part: Ah LAJHU-4 Unloading Auger, Horizontal 84½ long $1195 Suits 9660STS 9750STS 9670STS Original Part: Ah AH HPJD-6292 Splined Coupling, Unloading Auger $55 Suits CTS CTSII STS 9750STS 9660STS 9760STS 9860STS Original Part: H HPJD-1828 Unloading Auger, Horizontal 60½ long $1195 Suits 9660STS 9760STS 9860STS 9670STS 9770STS 9870STS S660 S670 S680 S690 Original Part: Ah HPJD-715 Bevel Gear For Auger Gear Box 17 Tooth $130 Suits (including T2 Models) Original Part: H86912 HPJD-6294 Bevel Gear Vertical Loading Auger 23 Tooth $330 Suits CTS CTSII STS 9750STS 9660STS 9760STS 9860STS 9670STS 9770STS 9870STS Original Part: H96294 HPJD-0967 Shaft, Clean Grain Elevator Gearcase $195 Suits CTS CTSII STS 9750STS 9660STS 9760STS 9860STS 9670STS 9770STS 9870STS S660 S670 S680 S690 Original Part: H HPJD-6938 Shaft, Tailings Elevator Top $115 Suits 9650STS 9750STS 9660STS 9760STS 9860STS 9670STS 9770STS 9870STS Original Part: H HPJD-9653 Shaft, Vertical Auger Gear Case Drive $350 Suits CTS CTSII STS 9750STS 9660STS 9760STS 9860STS 9670STS 9770STS 9870STS S660 S670 S680 S690 Original Part: H HPJD-5812 Hub Assembly - Unloading Auger $120 Suits 9650STS 9750STS 9660STS 9760STS 9860STS Original Part: Ah HPJD-5595 Pulley Hub Unloader Drive $200 Suits 9650STS 9750STS 9660STS 9760STS 9860STS Original Part: H HPJD-8075 Sprocket Unloading Auger 19 Tooth $175 Suits CTS CTSII STS 9750STS 9660STS 9760STS 9860STS 9670STS 9770STS 9870STS S660 S670 S680 S690 Original Part: Ah HPJD-716 Input Shaft For Auger Gear Box $200 Suits (including T2 Models) Original Part: H94703 HPJD-2230 Loading Auger Gear Kit 46 & 53 teeth $525 Suits CTSII STS 9750STS 9660STS 9760STS 9860STS 9670STS 9770STS 9870STS S660 S670 S680 S690 Original Part: AH HPJD Sprocket, Countershaft Drive, Unloading 19 Tth $125 Suits 9650STS 9750STS 9660STS 9760STS 9860STS 9670STS 9770STS 9870STS Original Part: Ah HPJD-7557 Sprocket, Tailings Elevator Upper 19 Tooth $70 Suits 9650STS 9750STS 9660STS 9760STS 9860STS 9670STS 9770STS 9870STS Original Part: Ah HPJD-6008 Sprocket, Upper Tailings Auger 30 Tooth $95 Suits CTS CTSII STS 9750STS 9660STS 9760STS 9860STS 9670STS 9770STS 9870STS S660 S670 S680 S690 Original Part: Ah Prices exclude GST

83 John Deere Auger and Elevator Parts continued HPJD-6352 Sprocket, Vertical Auger Lower Gear Case 40 Tth $135 Suits CTS CTSII STS 9750STS 9660STS 9760STS 9860STS 9670STS 9770STS 9870STS S660 S670 S680 S690 Original Part: Ah HPJD-5080 Sprocket, Vertical Auger Lower Gear Case 46 Tth $180 Suits CTS CTSII STS 9750STS 9660STS 9760STS 9860STS 9670STS 9770STS Original Part: Ah HPJD-6268 Coupling, Horizontal Unloading Auger $110 Suits 9660STS 9760STS 9860STS 9670STS 9770STS 9870STS Original Part: H HPJD-3290 Hub Pulley, Unloader Drive $165 Suits 9670STS 9770STS 9870STS Original Part: H HPJD-1098 Hub, Slip Clutch $85 Suits CTS CTSII STS 9750STS 9660STS 9760STS 9860STS 9670STS 9770STS 9870STS Original Part: H HPJD-5070 Sprocket, Grain Tank Cross Auger 49-Tooth $ 170 Suits CTS CTSII STS 9750STS 9660STS 9760STS 9860STS 9670STS 9770STS Original Part: Ah HPJD-9934 Shaft Unloading and Separator Drive $430 Suits CTS CTSII 9650STS to 9870STS inclusive Original Part: H HPJD-0001 Sprocket Grain Tank Cross Auger 60 Tooth $250 Suits CTS CTSII STS 9750STS 9660STS 9760STS 9860STS 9670STS 9770STS 9870STS Original Part: Ah HPJD-9352 Jackshaft, Unloader Drive $275 Suits 9650STS 9750STS 9660STS 9760STS 9860STS 9670STS 9770STS 9870STS Original Part: H HPJD-8445 Shaft, Input, Clean Grain Elevator Gearbox $215 Suits CTS CTSII STS 9750STS 9660STS 9760STS 9860STS 9670STS 9770STS 9870STS S660 S670 S680 S690 Original Part: Ce18445 HPJD-6131 Idler Sprocket Unloading Auger Drive $145 Suits CTS CTSII 9650STS to 9870STS inclusive Original Part: AH HPJD-8278 Pinion - Gear Case Horizontal Unloading Auger $250 Suits CTS CTSII 9650STS to 9770STS inclusive Original Part: CE18278 HPJD-5085 Shaft Auger Lower Vertical Gear Case $225 Suits CTS CTSII STS to 9870STS inclusive Original Part: H HPJD-9935 Sheave, Unloader Drive 2 Groove 8½ OD $295 Suits CTS CTSII STS 9760STS 9860STS 9870STS Original Part: H HPJD-7043 Pin, Upper Clean Grain Elevator $110 Suits 9650STS 9750STS 9660STS 9760STS 9860STS Original Part: H LAJGS9650R Shoe Supply Auger 40¾ Right Hand $200 Suits 9650STS to 9870STS inclusive Original Part: AH (Two Used) LAJGS9650L Shoe Supply Auger 40¾ Left Hand $200 Suits 9650STS to 9870STS inclusive Original Part: AH (Two Used) HPJD-1285 Bevel Gear, Conveyor Auger Drive $55 Suits 9650STS 9750STS 9660STS 9760STS 9860STS 9670STS 9770STS 9870STS S660 S670 S680 S690 Original Part: H H HPJD-7215 Drive Gear, Shoe Auger $35 Suits CTS CTSII STS 9750STS 9660STS 9760STS 9860STS 9670STS 9770STS 9870STS S660 S670 S680 S690 Original Part: H BJD-838 Wood Bearing Block $20 Shoe Supply Augers Suits 6620T T T2 Original Part: H84838 BJD-839 Wood Bearing Block $11 Shoe Supply Auger Suits CTS CTSII Original Part: H HPJD-8602 Elevator, Clean Grain $2700 Suits 9650STS 9750STS 9660STS 9760STS 9860STS Original Part: AXE12250 Ah ah HPJD-4760 Hub, Sheave; Clean Grain Elevator, Upper $100 Suits CTS CTSII STS 9750STS Original Part: H HPJD-1008 Clean Grain Elevator Boot $1200 Suits 9650STS 9750STS 9660STS 9760STS 9860STS Original Part: AH HPJD-5070 Sprocket Grain Tank Cross Auger $ Teeth ¾ Chain Suits 9400 to 9610 inclusive CTS CTSII 9650STS to 9770STS inclusive Original Part: AH AH HPJD-5080 Sprocket Vertical Auger Lower Gearcase $ Teeth ¾ Chain Suits 9400 to 9610 inclusive CTS CTSII 9650STS to 9770STS inclusive Original Part: AH Chaffer & Shoe (Sieve) Parts HPJD-8675 Sieve Frame Assembly RH $900 Suits 9650STS 9750STS 9660STS 9760STS 9860STS Original Part: Ah HPJD-8676 Sieve Frame Assembly LH $900 Suits 9650STS 9750STS 9660STS 9760STS 9860STS Original Part: Ah Prices exclude GST 83

84 John Deere Chaffer & Shoe (Sieve) Parts continued HPJD-2862 Chaffer Shoe Frame Left Hand $2250 Suits 9670STS 9770STS 9870STS Original Part: AH AH AH AH HPJD-2863 Chaffer Shoe Frame Right Hand $1950 Suits 9670STS 9770STS 9870STS Original Part: AH AH AH AH SHJD-9400 Chaffer Frame (Top) $ to 9560 inclusive CTS CTSII 9650CTS Original Part: AH SHJD-9600 Chaffer Frame (Top) $2050 Improved with thicker steel and more reinforcement Suits Original Part: AH SHJDB-9400 Sieve Frame (Bottom) $2050 Suits CTS 9560 CTS CTSII Original Part: AH SHJDP-9400 Precleaner Frame $3000 Suits CTS 9510 inclusive CTS CTSII Original Part: AH SHJDB-9600 Sieve Frame (Bottom) $1750 Suits Original Part: AH SHJDP-9600 Precleaner Frame $2800 Suits Original Part: AH HPJD-0046 Pan, Shaker Return; Wide $2250 Suits 9650STS 9750STS 9660STS 9760STS 9860STS 9670STS 9770STS 9870STS Original Part: Axe10046 AH AH AXE17166 HPJD-3598 Shaft Shoe Drive 66 long $550 Suits CTS CTSII 9400 to sts 9750sts Original Part: AH HPJD-6032 Shaft, Shoe Drive; Wide $450 Suits 9670STS 9770STS 9870STS Original Part: H HPJD-3375 Shaft Separator Drive 30½ long $600 Suits 9650sts to 9870STS inclusive Original Part: H HPJD-3602 Cam Outer Right Hd Shoe $130 Suits CTS CTSII 9400 to 9610 inclusive Original Part: H HPJD-3599 Cam Outer Left Hd Shoe $125 Suits CTS CTSII 9400 to 9610 inclusive Original Part: H HPJD-4546 Cam Outer Right Hd Shoe $60 Suits 9650STS to 9870STS inclusive Original Part: H HPJD-4549 Cam Inner RH Shoe $80 Suits CTS CTSII 9650STS 9660STS 9750STS 9760STS 9860STS Original Part: H HPJD-4550 Cam Inner LH Shoe $115 Suits CTS CTSII 9650STS 9660STS 9750STS 9760STS 9860STS Original Part: H HPJD-4547 Cam Outer Left Hd Shoe $60 Suits 9650STS to 9870STS inclusive Original Part: H HPJD-3603 Hub Sieve & Chaffer Drive $130 Suits 9400 to 9610 inclusive CTS CTSII 9650STS to 9870STS inclusive Original Part: H HPJD-9846 Arm Swinger Right Hd Chaffer $425 Suits 9650STS to 9870STS inclusive Original Part: AH AH AH HPJD-9844 Arm Swinger Left Hd Chaffer $425 Suits 9650STS to 9870STS inclusive Original Part: AH AH AH Genuine JD Genuine JD HPJD-8230 Link, Sieve To Grain Pan $80 Suits CTS CTSII STS 9750STS 9660STS 9760STS 9860STS 9670STS 9770STS 9870STS S660 S670 S680 S690 Original Part: Ah HPJD-1186 Shaft Cleaning Shoe Drive 64 5 /8 long $325 Suits 9650STS to 9870STS inclusive Original Part: H H Engine Parts HPJD-809 Radiator $1750 Suits T T2 Includes Cap Original Part: AH HPJD-8940 Radiator $1750 Suits CTS to S/N above S/N mm wide x 860mm high Original Part: AH AH HPJD-9364 Radiator $2995 Suits 9650STS to S/N STS to S/N Original Part: AH AH HPJD-8052 Radiator $2995 Suits 9650STS above S/N STS above S/N STS 9760STS Original Part: AH AH AH HPJD-9363 Radiator HEAVY DUTY $1875 Suits 9500 above S/N above S/N CTS above S/N CTsII 660mm wide x 1080mm high Original Part: AH HPJD-5639 Rotary Screen Pulley $95 Suits CTS CTSII STS to 9870STS inclusive Original Part: AH HPJD-0497 Rotary Screen Idler $40 Suits CTS CTSII STS to 9870STS inclusive Original Part: AH HPJD-1146 Rotary Screen Shaft 29¾ long $170 Suits 9650STS to 9770STS inclusive Original Part: H Prices exclude GST

85 John Deere Engine Parts continued TPJD-5985 WATER PUMP $490 Suits CTS CTSII Original Part: RE55985 HPJD-1502 Kit, Water Pump (8.1Ltr Diesel) $375 Suits 9650STS 9750STS 9660STS 9670STS Original Part: Re R R HPJD-0194 Kit, Water Pump - Tier 2 or Tier 3 $325 Suits 9660STS 9670STS 9770STS S660 S670 Original Part: Re RE RE HPJD-1503 Water Pump; High-Flow $600 Suits 9660STS 9750STS 9760STS Original Part: Re RE RE Engine Output Drive Parts HPJD-5557 Shaft, Rotary Screen Drive 59 $185 SUits 9860STS 9870STS Original Part: H HPJD-9058 Sheave, Reel Pump Drive; Hi-Capacity $460 Suits 9650STS 9750STS 9660STS 9760STS 9860STS 9670STS 9770STS 9870STS Original Part: H HPJD-0900 Idler Feed Accelerator/Secondary Jackshaft $95 Suits 9650STS to 9870STS inclusive Original Part: AH HPJD-4618 Shaft, Primary Jackshaft $1150 Suits 9650STS 9750STS 9660STS 9760STS 9860STS 9670STS 9770STS 9870STS Original Part: H Feeder House Parts HPJD-9118 Shaft, Engine Gear Case $795 Suits 9660STS 9760STS 9860STS 9670STS 9770STS 9870STS Original Part: Ah AH HPJD-3514 Shaft, Reverser Gearbox $750 Suits 9660STS 9760STS 9860STS 9670STS 9770STS 9870STS Original Part: H HPJD-4587 Sheave Feeder House $585 Suits 9660STS 9760STS 9860STS Original Part: AH HPJD-6332 Inner Sheave, Feeder House, $695 Suits 9660STS 9760STS 9860STS 9670STS 9770STS 9870STS Original Part: H HPJD-1417 Sheave, Feeder House $475 Suits CTS CTSII STS 9750STS 9660STS 9760STS 9860STS 9670STS 9770STS 9870STS Original Part: Ah AH HPJD-1579 Inner Sheave, Feeder House 12½ long $630 Suits CTS CTSII STS 9750STS 9660STS 9760STS 9860STS 9670STS 9770STS 9870STS Original Part: H HPJD-1415 Sheave, Feeder House; Outer, High Capacity $485 Suits 9650STS 9750STS Original Part: Ah HPJD-8575 Sheave, Inner; Feeder House, Hi-Capacity $625 Suits 9650STS 9750STS Original Part: H HPJD-9709 Sprocket Feeder Chain $55 Suits 9650STS 9750STS 9660STS 9760STS 9860STS Original Part: H HPJD-6934 Pulley, Fixed Speed; Feeder House 11½ OD $445 Suits 9650STS 9750STS 9660STS 9760STS 9860STS Original Part: Ah HPJD-8403 Sprocket, Feeder House Drive 26 & 38 Teeth $480 Suits 9660STS 9760STS 9860STS Original Part: Ah HPJD-3076 Sprocket, Feeder House; Drive 22 & 26 Teeth $300 Suits 9660STS 9760STS 9860STS Original Part: Ah HPJD-9681 Upper Feeder House Shaft RH Stub $430 Suits CTS CTSII Original Part: H HPJD-5822 Shield, LH Feederhouse Drive $200 Suits 9660STS 9760STS 9860STS 9670STS 9770STS 9870STS Original Part: H HPJD-7800 Feeder House Floor $1500 Suits 9650STS 9750STS Original Part: AH HPJD-9667 Floor, Feeder House $170 Suits 9650STS below S/N STS below S/N Original Part: Ah HPJD-4691 Floor Assembly, Feed House $1050 Suits 9650STS 9750STS 9660STS 9760STS 9860STS 9670STS 9770STS 9870STS S660 S670 S680 S690 Original Part: Ah HPJD-8352 Feeder House Floor $1595 Suits 9650STS 9750STS 9660STS 9760STS 9860STS 9670STS 9770STS 9870STS Original Part: Ah AH HPJD-3904 Seal - Feed Plate - Narrow $100 Suits CTS CTSII CTS 9660CTS 9650STS 9660STS 9750STS 9670STS 9760STS 9770STS 9860STS 9870STS Original Part: H HPJD-3734 Feeder Drum Shaft 52¾ long $165 Suits CTS CTSII 9650STS 9750STS Original Part: H HPJD-2940 Shaft, Feeder House, Lower (Narrow) 70 long $600 Suits 9650STS 9750STS 9660STS 9760STS 9860STS 9670STS 9770STS 9870STS Original Part: H HPJD-6091 Arm Feeder Idler Shaft $80 Suits CTS CTSII 9650STS 9750STS Original Part: AH Prices exclude GST 85

86 John Deere Feeder House Parts continued HPJD-2476 Arm - Feederhouse Drum $300 Suits 9660STS 9760STS 9860STS Original Part: H HPJD-3921 Arm - Feederhouse Drum $375 Suits 9660STS 9760STS 9860STS Original Part: H HPJD-8367 Arm, Feeder Roller $120 Suits 9660STS 9760STS 9860STS Original Part: Ah HPJD-6296 Arm Feeder Drum $135 Suits 9670STS 9770STS 9870STS Original Part: AH HPJD-8397 Idler Arm Feeder House $215 Suits 9650STS 9750STS 9660STS 9670STS 9770STS 9870STS Original Part: AH HPJD-1567 Upper Feeder House Shaft 73 7 /8 long $800 Suits 9600 above S/N Original Part: H HPJD-6576 Upper Feeder House Shaft 63 long $1075 Suits STS 9750STS 9660STS 9760STS 9860STS ctsii Original Part: H HPJD-3850 Shaft, Feeder House, Upper 63 long $850 Suits 9660STS 9760STS 9860STS 9670STS 9770STS 9870STS Original Part: H HPJD-3950 Bearing Housing $195 Suits CTS CTSII STS 9750STS 9660STS 9760STS 9860STS 9670STS 9770STS 9870STS S660 S670 S680 S690 Original Part: H H75329 H99149 HPJD-7482 Bracket, Upper Feederhouse Shaft $40 Suits CTS CTSII STS 9750STS 9660STS 9760STS 9860STS 9670STS 9770STS 9870STS S660 S670 S680 S690 Original Part: H HPJD-8671 Shaft Feeder Roller 52½ long $160 Suits 9660STS 9760STS 9860STS 9670STS 9770STS 9870STS Original Part: H HPJD-3076 Sprocket Feeder House Drive $295 22/26 Tooth 21 Internal Spline Suits 9660STS 9760STS 9870STS Original Part: AH HPJD-9634 Sprocket Feeder House $95 Suits 9670STS 9770STS 9870STS Original Part: AH HPJD-4011 Shaft- Feeder House Lower 70¾ long $730 Suits 9670STS 9770STS 9870STS Original Part: H HPJD-5454 Shaft Feeder House $225 Suits CTS CTSII 9650STS to 9870STS inclusive Original Part: AH HPJD-1813 Pin Pinion Gear Feeder House $50 Suits 9650STS to 9770STS inclusive Original Part: Z61813 HPJD-2714 Gear Pinion Feeder House 14/24 Teeth $425 Suits 9650STS to 9770STS inclusive Original Part: Z12714 HPJD-1692 Shaft, Deck Plate Indicator $50 Suits CTS CTSII STS 9750STS 9660STS 9760STS 9860STS 9670STS 9770STS 9870STS S660 S670 S680 S690 Original Part: R HPJD-7985 Reverser Gearbox Shaft 18 long $560 Suits 9650STS 9750STS 9660STS 9760STS 9860STS Original Part: H HPJD-0530 Guide, Chain; Feeder House - Wooden $55 Suits CTS CTSII STS 9750STS Original Part: H HPJD-8522 Gear Pinion Feeder House 14/29 Teeth $290 Suits 9660STS to 9870STS inclusive Original Part: CE18522 HPJD-7015 Gear Input Feeder House $550 Suits 9660STS 9670STS 9760STS 9770STS 9860STS Original Part: H HPJD-7024 Main Hydraulic Pump $950 Suits CTS CTSII Original Part: AH Hydraulic Parts HPJD-9588 Cooler Hydraulic $950 Suits CTS CTSII Original Part: AH AH HPJD-3229 Hydraulic Cylinder Reel Lift For and Aft $425 Suits 900 Series Flex 900 Series Rigid 925D 936D Draper Fronts Left Side Only Original Part: AH Steering HPJD-4612 Power Steering Cylinder End $135 Suits CTS CTSII Original Part: AH HPJD-5129 Rear Rim 14 x 26 $875 Suits JD9500 to 9860STS inclusive Original Part: AH HPJD-5654 Left Hand Stub Axle $900 Suits CTS CTSII Original Part: AH HPJD-5655 Right Hand Stub Axle $900 Suits CTS CTSII Original Part: AH AH Prices exclude GST

87 John Deere Transmission and Final Drive Parts FD9650L Re-Manufactured Final Drive (LH) $8500 Heavy Duty Suits 9650STS 9660STS 9670STS 9750STS 9760STS 9860STS 9770STS 9870STS S670 with different pinion If no exchange add $1000 $1000 refunded on return of used Final Drive Original Part: AH FD9650R Re-Manufactured Final Drive (RH) $8500 Heavy Duty Suits 9650STS 9660STS 9670STS 9750STS 9760STS 9860STS 9770STS 9870STS S670 with different pinion If no exchange add $1000 $1000 refunded on return of used Final Drive Original Part: AH HPJD-7014 Final Drive Pinion 11 Tooth $200 Suits CTS II Original Part: H HPJD-7722 Final Drive Pinion 10 Tooth $550 Suits 9650STS to 9870sts inclusive Original Part: H HPJD-675 Final Drive Coupler, 23 Spline $55 Suits 7720 to 8820T2 Original Part: H HPJD-5510 Final Drive Coupler $55 Suits 9400 to 9610 inclusive cts CTSII 9650STS to 9750STS 9660STS 9670STS 9760STS 9770STS 9870STS Original Part: H HPJD-6465 Shaft, Axle Spacer Drive (105Mm) $85 Suits 9650STS 9750STS 9660STS 9760STS 9860STS 9670STS 9770STS 9870STS Original Part: H HPJD-5665 Axle Drive Shaft Right Hand 17¾ long $500 Suits STS 9750STS 9660STS 9760STS 9770STS 9870STS Original Part: H HPJD-5666 Axle Drive Shaft Left Hand 285/48 long $535 Suits STS 9750STS 9660STS 9760STS 9770STS 9870STS Original Part: H HPJD-3660 Shaft Hydrostatic Pump 11¼ long $350 Suits 9400 to 9610 inclusive CTS CTSII Original Part: AH HPJD-6818 Shaft, Hydro Drive Motor 123/8 long $995 Suits 9650STS 9750STS 9660STS 9760STS 9860STS 9670STS 9770STS 9870STS Original Part: Az56818 HPJD-5662 Shaft, Ring & Pinion Final Drive $ Tooth, 300mm Long Suits CTS CTSII 9400 to 9610 inclusive 9650STS to 9870STS inclusive Original Part: H HPJD-5663 Shaft 15¾ long $375 Suits CTS 9400 to 9610 inclusive 9650STS to 9870STS inclusive Original Part: H HPJD-5664 Shaft, Ring & Pinion Final Drive 59 long $290 Suits STS 9750STS 9660STS 9760STS 9860STS 9670STS 9770STS 9870STS Original Part: H HPJD-1111 Spindle, Rear Axle $875 Suits 9650STS 9750STS 9660STS 9760STS 9860STS 9670STS 9770STS 9870STS Original Part: H Walker Parts BJW-614 Walker Blocks (1 Set of 2 Halves) $40 Suits Front or Rear 1½ Crank Suits T T2 Original Part: AH92589 AH BJW-677 Walker Block (1 Set of 2 Halves) Wood $45 Suits 9400 above S/N above S/N above S/N Original Part: H BJW-820 Walker Block (1 set of 2 Halves) Wood $60 Replaces Aluminium Blocks 39.8mm Suits 9400 above S/N above S/N above S/N Original Part: AH H H BJW-821 Walker Block (1 Set of 2 Halves) $75 Slightly Undersize to suit Worn Shafts 36.5mm Replaces Aluminium Blocks Suits 9400 above S/N above S/N above S/N BJW-217 Walker Block (1 Set of 2 Halves) $40 38mm Lug Type Suits Late Original Part: AZ31217 Wind Fan Parts HPJD-432 Vari Speed Sheave $230 Inner (on Fan Shaft) Suits T T2 Original Part: AH AH HPJD-433 Vari Speed Sheave Outer $325 (On Fan Shaft) Suits T T2 Original Part: H97600 HPJD-434 Vari Speed Sheave Inner $150 (On Secondary Countershaft) Suits T T2 Original Part: H93503 HPJD-435 Vari Speed Sheave Outer $150 (On Secondary Countershaft) Suits T T2 Original Part: H HPJD-6016 Sheave Inner Fan Drive Standard Speed $260 Suits 9660STS 9760STS 9860STS Original Part: H HPJD-7219 Sheave - Inner Driver 101/8 Diameter $450 Suits 9400 above S/N CTS below S/N STS below S/N STS below S/N Original Part: AH HPJD-7496 Sheave Sheave 157/8 Diameter $340 Suits CTS 9400 Below S/N below S/N below S/N Original Part: AH Prices exclude GST 87

88 John Deere Wind Fan Parts continued HPJD-7535 Fan Sheave Inner 13 Diameter $290 Suits 9650STS above S/N STS above S/N STS 9760STS 9860STS Original Part: AH HPJD-7534 Fan Sheave Outer $315 Suits 9650STS above S/N STS above S/N STS 9750STS above S/N STS above S/N STS 9870STS Original Part: AH HPJD-1051 Fan Sheave Inner 330mm Diam Std Speed $450 Suits 9650STS 9750STS 9670STS 9770STS 9870STS S670 Original Part: H HPJD-4179 Fan Sheave Outer 330mm Diameter $ STS 9750STS Original Part: AH HPJD Fan Sheave Outer 330mm Diameter $300 Suits CTS CTSII CTS Original Part: AH HPJD-2190 Fan Sheave 330mm Diameter $300 Suits CTS CTSII CTS Original Part: H HPJD-9175 Fan Thrust Bearing $70 Suits CTS CTSII CTS 9650STS 9660CTS 9660STS 9750STS 9670STS 9760STS 9770STS 9860STS 9870STS Original Part: AH HPJD-8420 Fan Blade $110 Suits 9650STS 9750STS 12 per Machine Original Part: H HPJD-6345 Fan Blade 523/8 long 1330mm $ STS 9760STS 9860STS 9670STS 9770STS 9870STS S660 above S/N S670 above S/N S680 above S/N S690 above S/N per Machine Original Part: H HPJD-3376 Fan Drive Shaft 65 5 /8 Long $675 Suits 9650STS above S/N STS above S/N STS 9760STS 9770STS 9860STS 9870STS Original Part: H HPJD-8384 Shaft, Fan Drive Speed 10 long $85 Suits CTS CTSII STS 9750STS 9660STS 9760STS 9860STS 9670STS 9770STS 9870STS S660 S670 S680 S690 Original Part: Ah General HPJD-8925 Blower Pressuriser Motor $195 Suits 9400 to 9610 CTS CTSII 9650STS 9750STS 9660STS 9760STS Original Part: AH HPJD-8926 Evaporator Heater Motor $260 Suits Original Part: AH HPJD-4697 Knife Drive $2800 Suits Draper fronts Original Part: DE19786 HPJD-4714 Knife Drive - German Made $2800 Suits 600 Flex & Rigid Auger Fronts (Not inc. Pulley) Original Part: DE19785 HPJD-1086 Knife Drive - German Made $4000 Suits 635 and 640 Draper Fronts (Not inc. Pulley) Original Part: DE21086 HPJD-1481 Knife Drive Wobble Box $1400 Suits 200 & 900 Series Rigid Fronts (No Snout) Original Part: AE41481 HPJD-7735 Knife Drive Repair Kit for HPJD-1481 $975 Suits 200 and 900 series Rigid Fronts Original Part: AE57735 HPJDH-1481H Wobble Box Housing $390 Suit HPJD & 900 Series Rigid Fronts Original Part: AE35149 HPJD-6402 Knife Drive Wobble Box Heavy Duty $2400 Suits 900 Series Rigid + Flex above S/N Spline Output Shaft Original Part: AH HPJD-5152 Snout suits HPJD-1481 $ & 900 Series Rigid Fronts Original Part: AE35152 HPJD Knife Drive Repair kit for HPJD-6402 $1150 Suits 900 Series Front above S/N HPJD-2502 Drive Arm suit HPJD-6402 $600 Suits 900 Series Rigid & Flex above S/N Original Part: E92502 HPJD-4485 Alternator, Bosch - 95 Amp $300 Suits CTS CTSII STS 9750STS 9660STS 9760STS 9860STS Original Part: Ty24485 HPJD-1398 Alternator, Presto Amp $1150 Suits 9650STS 9750STS 9660STS 9760STS 9860STS Original Part: Ah HPJD-7691 Alternator Amp $525 Suits 9660STS 9760STS 9860STS 9670STS 9770STS 9870STS s660 s670 S680 s690 Original Part: Axe17691, Replaces Ah229090, Re210793, A-Re555751, Se501826, Se HPJD-9875 Compressor, Denso Style With Clutch $825 Suits STS 9750STS 9660STS 9760STS 9860STS 9670STS 9770STS 9870STS Original Part: Ah HPJD Receiver/Drier $120 Suits CTS CTSII STS 9750STS 9660STS 9760STS 9860STS 9670STS 9770STS 9870STS S660 S670 S680 S690 Original Part: Ah Prices exclude GST

89 John Deere General continued HPJD-6648 Windscreen $995 Suits 9400 to 9610 inclusive 9650STS 9660STS 9750STS 9760STS 9770STS 9860STS 9870STS Original Part: AH HPJD-1342 Lever, Handle - Elevator Doors $33 Suits CTS 9400 to 9600 Series 9650STS to 9870STS S660 to S690 Original Part: H HPJD-7647 Bracket, Latch $15 Suits 9650STS 9750STS 9660STS 9760STS 9860STS 9670STS 9770STS 9870STS S660 S670 S680 S690 Original Part: H HPJD-0309 Plate, Clutch Drive (4 Per Set) $58 Used on Separator Drive, Wet Clutch & Pump Drive Shaft Suits CTS CTSII STS 9750STS 9660STS 9760STS 9860STS Original Part: T70309 HPJD-2676 Jackshaft, Straw Chopper & Discharge Beater $255 Suits 9650STS 9750STS 9660STS 9760STS 9860STS 9670STS 9870STS Original Part: H HPJD-6975 Pulley, Discharge Beater & Chopper Driver $575 Suits 9650STS 9750STS 9660STS 9760STS 9860STS 9670STS 9770STS 9870STS Original Part: H HPJD-4017 Clutch Disc $55 Suits 9770STS 9870STS Original Part: Re HPJD-5490 Clutch Disc Separator Transmission & PTO $60 Suits CTS CTSII STS 9750STS 9660STS 9760STS 9860STS 9670STS 9770STS 9870STS Original Part: Ah HPJD-8265 Slip Clutch $20 Suits CTS CTSII S660 S670 S680 S690 Original Part: H HPJD-7909 Sprocket, Idler; 15 Teeth / 60 Chain $35 Suits CTS CTSII STS 9750STS 9660STS 9760STS 9860STS 9670STS 9770STS 9870STS S660 S670 S680 S690 Original Part: Ae27909 HPJD-8597 Gas Strut $85 Suits 9400 to 9610 inclusive CTS CTSII 9650STS 9750STS 9660STS 9670STS 9760STS 9770STS 9860STS 9870STS Original Part: AH HPJD-4069 Blower Motor $195 Suits 9670STS 9770STS 9870STS Original Part: Axe14069 HPJD-1087 Bushing $11 Suits CTS CTSII S660 S670 S680 S690 Original Part: H HPJD-4450 Flanged Idler 2B x 8¾ $85 Suits 6620 to 8820T2 inclusive 9410 to 9610 inclusive Original Part: AH94450 AH AH AH HPJD-9549 Idler Rotary Screen $60 Suits all 9650STS 9870STS inclusive Original Part: AH HPJD-5276 Flanged Idler $75 Suits 6620 to 8820T2 inclusive 9410 to 9610 inclusive 9650STS to 9870STS inclusive DFI-144 Original Part: AH85276 HPJD-8097 Belt Tensioner $210 Suits 9650STS 9750STS 9660STS 9760STS 9670STS 9770STS Original Part: Re HPJD-1010 Shaft Rear Beater $495 Suits 9650STS to 9870STS inclusive Original Part: H HPJD-8386 Shaft Front Beater 65 long $425 Suits 9650STS to 9870STS inclusive Original Part: H LBFJD-9650FH Feed Accelerator Wear Plate $22 Suits 9650STS to 9870STS inclusive Original Part: H HPJD-9992 Electric Actuator 12 Stroke - Chopper $1350 Suits 9650STS to 9870STS inclusive operates to position Chopper Original Part: AH HPJD-SCD936 Clutch Assembly - Draper Front $500 Suits All Draper platforms To avoid damage to your drive line HPJD-5004 Straw Chopper Blade Kit - Straight (Set of 8) $60 Double Bevel Edge Suits STS 9660STS 9750STS 9760STS 9860STS CTS CTSII Original Part: AH H HPJD Straw Chopper Blade - Stationary $10 Suits STS 9750STS 9760STS 9860STS CTS CTSII Original Part: H HPJD-5909 Straw Chopper Blade Kit - Winged $90 4 left hand 4 right hand - Winged Type Suits STS 9660STS 9750STS 9760STS 9860STS CTS CTSII Original Part: AH H HPJD-5940 Straw Chopper, Blade Kit Scoop Type $200 Set of 8-4 left, 4 right for ends of rotor Suits 9670STS 9770STS 9870STS Original Part: Ah HPJD-5937 Straw Chopper Blade Kit - Winged $150 Set of 8-4 left, 4 right Suits 9670STS 9770STS 9870STS S690 Original Part: Ah H H HPJD-0255 Straw Chopper Blade Kit - Winged $300 Set of 8-4 left, 4 right Suits S660 S670 S680 S690 Original Part: KXE10255 KXE10304 HPJD-0256 Straw Chopper Blade Kit - Straight (Set of 8) $250 Double Bevel Edge Suits S660 S670 S680 S690 Original Part: KXE Prices exclude GST 89

90 New Holland Auger Parts LAIVU-8010 Vertical Unloading Auger 47¼ long $950 Suits CR920 CR940 CR960 CR970 CR9040 CR9060 CR9070 CX860 CX880 CX8070 CX8080 CX8090 Original Part: HPNH-0302 Bubble Up Auger Base $1230 Suits CR940 CR960 CR970 CR9040 CR9060 CR9070 CX840 CX860 CX880 CX8070 CX8080 CX8090 Original Part: HPNH-1622 Bubble Up Auger Tube 34 long $852 Suits CR940 CR960 CR970 CR9040 CR9060 CR9070 CX8070 CX8080 CX8090 Original Part: HPNH-7518 Bubble Up Auger 43 long $1200 Suits CR940 CR960 CR970 Original Part: HPNH-3749 Lower Bubble Up Auger 38 long $1050 Suits CR940 CR960 CR970 CR9040 CR9060 CR9070 CX8070 CX8080 CX8090 Original Part: HPNH-3757 Upper Bubble Up Auger 42½ long $995 Suits CR940 CR960 CR970 CR9040 CR9060 CR9070 CX840 CX860 CX880 CX8070 CX8080 CX8090 Original Part: HPNH-3765 Bubble Up Auger 27½ long $970 Suits CR940 CR960 CR970 CR9040 CR9060 CX840 CX8070 Original Part: LANS-70 Bin Loading Bubble up Auger 84¼ long $600 Suits TR70 TR75 TR85 TR86 TR87 TR88 (15 Spline) Original Part: LANS-95 Bin Loading Bubble up Auger 88¼ long $1125 Suits TR95 TR96 TR97 TR98 (15 Spline Only) Original Part: LANS-98 Bin Loading Bubble up Auger 87½ long $1625 Suits TR89 TR98 above S/N with 1 10 Spline Hub Original Part: HPNH-1549 Bottom Grain Elevator Auger 95 long $975 Suits CR940 CR960 CR9040 CR9060 Original Part: HPNH-1551 Bottom Grain Elevator Auger 100 long $975 Suits CR970 CR9070 CR9080 CX840 CX850 CX880 CX8080 CX8090 Original Part: LANC-71 Clean Grain Auger 1 Shaft 69½ long $725 Suits TR85 TR86 TR87 TR88 Original Part: LANC-85 Clean Grain Cross 1 1 /8 Shaft 69½ long $500 Suits TR85 TR86 TR87 TR88 Original Part: LANC-95 Clean Grain Auger 85 long $675 13/₈ Sprocket Suits TR96 TR97 TR98 TR99 TR89 Original Part: HPNH-8346 Bottom Auger Tailing Elevator $1265 Suits CR970 CR9070 CR9080 CX840 CX860 CX880 CX8070 CX8080 Original Part: HPNH-2959 Tailing Elevator Auger (RH) 64 long $950 Suits CR940 CR960 CR970 CR980 CR9040 CR9060 CR9070 CR9080 Original Part: HPNH-2961 Tailing Elevator Auger (LH) 64 long $950 Suits CR940 CR960 CR970 CR980 CR9040 CR9060 CR9070 CR9080 Original Part: HPNH-8345 Auger Return/Tailing 79 long $975 Suits CR940 CR9040 CX8040 Original Part: HPNH-0769 Bottom Tailing Elevator Auger 89 long $875 Suits CR960 CR9060 Original Part: HPIHC-0339 Auger; Horizontal Unloading, 18 Ft $1800 Suits CR940 CR960 CR970 CR9040 CR9060 CR9070 CX8070 CX8080 CX8090 Original Part: HPIHC-0158 Horizontal Unloading Auger Tube 18 Ft. $2530 Suits CR940 CR960 CR970 CR9040 CR9060 CR9070 CR9080 Original Part: HPIHC-9509 Auger, Horizontal Unloading 17ft 8 long $2250 Suits CR9040 CR9060 CR9070 Original Part: HPIHC-1114 Shaft Upper Unloading Auger Gearbox $495 Suits all CR and CX Models Original Part: HPIHC-3219 Shaft Lower Unloading Auger Gearbox $ /16 long 8/21 Teeth Suits all CR and CX models Original Part: HPNH-260 Bevel Gear Bubble up Auger Gear Box $450 Suits TR70 TR86 TR87 TR88 Original Part: HPNH-7827 Shaft Bubble up Gear Box $875 Suits TR89 TR98 TR99 Original Part: LANR-71 Repeat Cross Auger $400 Suits TR70 TR75 TR85 TR86 TR87 TR88 Original Part: HPIHC-5223 Unloading Auger Extension 3Ft long $925 Suits CR940 CR960 CR970 CR9040 CR9060 CR9070 CR9080 CX840 CX860 CX880 CX8070 CX8080 CX8090 Original Part: HPIHC-0154 Tube; Unloading Auger Extension, 3 Ft. $975 Suits CR940 CR960 CR970 CR9040 CR9060 CR9070 CX840 CX860 CX880 CX8070 CX8080 CX8090 Original Part: Prices exclude GST

91 New Holland Auger Parts continued HPIHC-1650 Shoe, Shaker, Upper, Wide Frame $2750 Suits CR970 CR980 CR9070 CR9080 Original Part: HPIHC-2623 Unloading Auger Extension Bearing Holder $52 Suits CR940 CR960 CR970 CR9040 CR9060 CR9070 CX8070 CX8080 CX8090 Original Part: HPNH-7335 Upper Shaker Shoe Narrow $2400 Suits CR940 CR960 CR9040 CR9060 Original Part: LAIB-8010 Auger, Grain Tank Bottom Front 10 Ft long $800 Suits (CR940 CR960 CR970 - Front only) (CR9040 CR9060 CR Front and Rear) (CX860 CX880 CX8070 CX8080 CX Front only) Original Part: LAIB-8010R Auger, Grain Tank Bottom Rear 1207/8 long $825 Suits (CR940 CR960 CR970 CR9040 CR9060 CR9070 CX840 CX860 CX880 CX8070 CX8080 CX8090 Rear) (CR9040 CR9060 CR9070 Front) Original Part: Chaffer and Sieve Area Parts HPIHC-2561 Arm Lower Shaker Shoe $95 Suits CR9040 CR9060 CR9070 CR8070 CR8080 CX8090 Original Part: HPNH-1540 Bush Grain Tray and Shaker Shoe $4 ea Suits TR NH TX34 TX64 TX66 TX68 CX840 CX860 CX880 CX8070 CX8080 CX8090 CR920 CR940 CR960 CR970 CR9040 CR9060 CR9070 Original Part: HPIHC-7702 Arm, Shaker Shoe Drive $370 Suits CR940 CR960 CR970 CR9040 CR9060 CR9070 Original Part: HPIHC-4041 Arm Upper Shaker Shoe $115 Suits cr models to CR9090 Original Part: HPIHC-4571 Arm Upper Shoe Drive Left hand $210 Suits cr models to CR9090 Original Part: HPIHC-4573 Arm Upper Shoe Drive Right hand $210 Suits cr models to CR9090 Original Part: HPIHC-1082 Bushing, Shoe Arm, Upper $110 Suits CR940 CR960 CR970 CR9040 CR9060 CR9070 CX840 CX860 CX880 CX8070 CX8080 CX8090 Original Part: HPIHC-0474 Housing, Bearing; Shaker Shoe Drive $105 Suits CR940 CR960 CR970 CR9040 CR9060 CR9070 CX840 CX860 CX880 CX8070 CX8080 CX8090 Original Part: HPIHC-6877 Housing, Bearing; Shoe Drive, Upper $18 Suits CR940 CR960 CR970 CR9040 CR9060 CR9070 CX840 CX860 CX880 CX8070 CX8080 CX8090 Original Part: HPIHC-0033 Housing, Shaker Shoe (2 Halves required) $18 Suits CR940 CR960 CR970 CR9040 CR9060 CR9070 CX840 CX860 CX880 CX8070 CX8080 CX8090 Original Part: HPIHC-4817 Roller, Cleaning Shoe Pivot Frame $38 Suits CR940 CR960 CR970 CR9040 CR9060 CR9070 CX840 CX860 CX880 CX8070 CX8080 CX8090 Original Part: HPIHC-0470 Support, Upper Shoe Drive (LH) $210 Suits CR940 CR960 CR970 CR9040 CR9060 CR9070 CX840 CX860 CX880 CX8070 CX8080 CX8090 Original Part: HPIHC-4452 Support, Upper Shoe Drive (LH) $75 Suits CR940 CR960 CR970 CR9040 CR9060 CR9070 CX840 CX860 CX880 CX8070 CX8080 CX8090 Original Part: HPIHC-4453 Support Upper Shoe Drive (RH) $75 Suits all CR & CX Models Original Part: HPIHC-0472 Support, Upper Shoe Drive (RH) $210 Suits CR940 CR960 CR970 CR9040 CR9060 CR9070 CX840 CX860 CX880 CX8070 CX8080 CX8090 Original Part: HPIHC-7184 Shaft Shaker Shoe Drive $50 Suits all CR and CX models Original Part: HPIHC-2651 Bushing Upper Shaker Shoe $10 Suits all CR and CX models Original Part: HPIHC-8222 Bushing Upper Shaker Shoe 21mm Hole $5 Suits all CR, CX and TX models Original Part: HPIHC-9072 Rubber Bush Upper Shoe Drive $50 Suits all CR and CX models Original Part: HPIHC-9232 Bushing Cleaning Shoe Pivot Frame $15 Suits all CR, CX and TX models Original Part: HPIHC-4817 Roller -Cleaning Shoe Pivot Frame $38 Suits all CR, CX and TX models Original Part: HPIHC-1928 Shaft -Cleaning Shoe Pivot Frame 8¼ long $95 Suits all Cr and CX models TX36 TX66 TX68 Original Part: Prices exclude GST 91

92 New Holland Chaffer and Sieve Area Parts continued HPIHC-9795 Sprocket Driven Unloading Drive 25 Tooth $90 Suits all CR & CX Models Original Part: HPIHC-7639 Sprocket Idler Unloading Drive 15 Tooth $50 Suits all CR & CX Models Original Part: HPIHC-9770 Sprocket Unloading Drive 25 Tooth $75 Suits all CR & CX Models Original Part: HPIHC-9777 Sprocket Unloading Drive 38 Tooth $85 Suits all CR & CX Models Original Part: Engine Parts HPIHC-2491 Water Pump $250 Suits CR9070 Original Part: Engine Output Drive Parts HPNH-1357 Separator Clutch Plate $195 ea 2 per Harvester Suits TR70 TR85 TR86 TR87 TR88 TR89 TR95 TR96 TR97 TR98 TR99 Original Part: Transmission and Final Drive Parts HPIHC-9687 Shaft, Transmission Output $275 Suits CR940 CR960 CR970 CR9040 CR9060 CR9070 CX840 CX860 CX880 CX8070 CX8080 CX8090 Original Part: HPIHC-0165 Shaft, Drive, Transmission Half (LH) $550 Suits CR970 CR980 CR9070 CR860 CX880 CX8080 CX8090 Original Part: HPNH-1400 Brake Disc (26 Spline) $130 Suits TX34 TX36 TR85 TR86 TR87 TR Original Part: HPJD-675 Drive Axle Coupling 23 Spline $55 Suits TR70 TR99 TR85 before S/N Original Part: HPNH-1166 Drive Axle Coupling 22 Spline $105 Suits TR85 TR95 TR86 TR87 TR88 TR89 TR99 TX34 TX64 TX66 TX Original Part: HPIHC-8982 Planetary Drive Coupling $125 Suits all CR and CX models Original Part: HPNH-9419 Planetary End Reduction Pinion $ /16 long, 23 Spline, 11 Teeth Suits CR940 CR960 CR9040 CR9060 CX820 CX840 CX8070 Original Part: HPIHC-0985 Axle Drive Shaft 31½ long Left Hand $ Spline 1¾ Suits CR960 CR970 CR980 CR9070 CR9080 CX860 CX8070 CX8080 CX8090 Original Part: HPIHC-0991 Axle Drive Shaft 41 5 /8 long Right Hand $ Spline 1¾ Suits CR920 CR940 CR960 CR970 CR9040 CR9060 CR9070 CX840 CX860 CX880 CX8070 CX8080 Original Part: HPIHC-0162 Axle Drive Shaft 26 1 /8 long Left Hand $ Spline 1¾ Suits CR970 CR980 CR9070 CX840 CX860 CX880 CX8070 CX8080 CX8090 Original Part: HPIHC-0165 Axle Drive Shaft 363/8 long Right Hand $ Spline 1¾ Suits CR970 CR980 CR9070 CX840 CX860 CX880 CX8070 CX8080 CX8090 Original Part: HPIHC-0951 Axle Drive Shaft 38½ long Left Hand $ Spline 1¾ Suits all CR and CX models Original Part: HPIHC-0957 Axle Drive Shaft 48¾ long Left Hand $ Spline 1¾ Suits all CR and CX models Original Part: HPIHC-0974 Axle Drive Shaft 46¾ long Right Hand $ Spline 1¾ Suits all CR and CX models Original Part: HPIHC-9688 Shaft Differential With Lock $ /32 long, 22 Spline Suits all CR and CX models Original Part: HPIHC-6882 Shaft Propulsion Drive $1050 Suits all CR and CX models Original Part: Steering HPNH-881 Tie Rod End Left Hand & Right Hand $170 Suits all CR and CX models - Fits Power Steering Cylinder Ends Original Part: HPNH-2906 Tie Rod End $95 Suits CR920 CR940 CR960 CR970 CR9040,CR9060 CR9070 CX840 CX860 CX880 CX8070 CX8090 Fits ends of long tie rod and inner ends of lower steering cylinder Original Part: HPNH-0679 Tie Rod End $95 Suits TX34 Original Part: Wind Fan Parts HPNH-1145 Fan vari sheave suits inner and outer $120 Suits Original Part: HPNH-1172 Fan sheave Outer Driven $290 Suits TR70 TR85 Original Part: Prices exclude GST

93 New Holland Knife Drive and Parts HPNH-1394 Wobble Box (no arm) with pulley $1925 Suits 806 (after modification) Fronts with Tapered Splined Shaft for pulley Original Part: HPNH-1914 Wobble Box (no arm, no pulley) $1725 Suits 71C 72C 73C 74C & CIH with tapered shaft for pulley Original Part: HPNH-1806 Pulley suit HPNH1914 Wobble Box $150 Suits 71C 72C 73C 74C & CIH Tapered Centre on Pulley Original Part: HPNH-1130 Wobble Box heavy duty with arm (no pulley) $1550 Suits Fronts on Original Part: HPNH-1539 Knife Drive Arm (12 Spline) $135 Suits C 72C 73C 74C Original Part: replaces HPNH-0120 Rocker Fork suits HPNH-1394 Box $180 Suits C 72C 73C 74C Original Part: replaces General TP-541 Cab Fan $185 Suits TR88 TR98 LACNHSP12 Sieve Adjuster Linear Actuator $1250 Suits all CR and CX models Original Part: Genuine HPNH2008 Linear Actuator Sieve Levelling $2000 Suits all CR and CX models Original Part: HPIHC-0293 Gas Strut Left Cab Door $60 Suits all CR and CX models Original Part: HPIHC-3463 A/C Compressor with Clutch $770 Suits CR940 CR9040 CR9060 CR9070 Original Part: A2 HPIHC-0052 Glass, Door (LH) $420 Suits CR940 CR960 CR970 Original Part: NHRC Rotor Coupling Chain (one per harvester) $40 Duplex ¾ - suits TR Links and One Conn Link NHGB50-2 Gear Box Couple Chain Kit (two per harvester) $40 Duplex 5/8 - suits TR Links and One Conn Link HPNH-28SC Drive Bushing Chaff Spreader $55 Suits CX840 CX860 CX880 Original Part: HPNH-1351 Cab Blower Assembly $690 Suits CR920 CR940 CR960 CR970 CX840 CX860 CX880 Original Part: NEW Chopper Blades HPNH-7640 Stationary Chopper Knife $10 Suits CR940 CR960 CR970 cr980 cr9060 cr9070 cr9080 cx840 cx860 cx880 Original Part: HPNH-7624 Chopper Blade Straight 18mm Hole $24 Suits CR940 CR960 CR970 CR980 CR9070 CR9080 and some CX models Original Part: HPNH-1976 Chopper Blade Winged Left $28 Suits CR940 CR960 CR970 CR980 CX840 CX860 CX880 Original Part: HPNH-1978 Chopper Blade Winged Right $28 Suits CR940 CR960 CR970 CR980 CX840 CX860 CX880 Original Part: HPNH-3455 Stationary Hardened Knife $25 Suits CR9060 CR9070 CR9080 CR9090 CX8070 CX8080 CX8090 Original Part: HPNH-8524 Stationary Chopper Knife $12 Suits CR9060 CR9070 CR9080 CR9090 CR7.90 CR8.90 CR9.90 CR10.90 Original Part: HPNH-8316 Chopper Blade Straight 20mm Hole $15 Suits CR9060 CR9070 CR9080 CR9090 CR7.90 CR8.90 CR9.90 CR10.90 Original Part: HPNH-4920 Chopper Blade Winged Right $35 Suits CR9060 CR9070 CR9080 CR9090 CR8090 CR7.90 CR8.90 CR9.90 CR10.90 Original Part: HPNH-4918 Chopper Blade Winged Left $35 Suits CR9060 CR9070 CR9080 CR9090 CR8090 CR7.90 CR8.90 CR9.90 CR10.90 Original Part: HPIHC-5006 Receiver / Drier $72 Suits CR940 CR960 CR970 CR9040 CR9060 CR9070 Original Part: A1 NHRC60-2 Rotor Coupling Chain Kit (one per harvester) $35 Duplex ¾ - suits all TR s up to and including TR98 19 Links and one Conn Link NHGB50-2 Gear Box Coupler Chain Kit (two per harvester) $35 Duplex 5 / 8 - suits all TR s up to and including TR98 23 Links and one Conn Link Prices exclude GST 93

94 Massey Ferguson/Agco/Allis Engine Output Drive Parts TPAC-1445 Water Pump $250 Suits Allis with D3500 & 670T Engines Original Part: HPAC-655 Rotor Gear Box Shaft $500 Suits Allis N5 N6 N7 Original Part: Hydraulic Parts HPMF-223 Main Hydraulic Pump $1675 Suits MF Original Part: M91 Walker Parts bwmf-510 Walker Blocks $46 Suits Original Part: M92 Accelerator Rolls ARN-24 Accelerator Rollers Bolt on type $48 ea OEM Quality Rubber Suits Agco R40 R50 R60 R70 R42 R52 R62 R72 Original Part: ARN-SS Stainless Steel Accelerator Roll Set of 8 $1100 set Alternative to rubber Suits Agco R60 R70 R62 R72 Original Part: ARN-SS7 Stainless Steel Accelerator Roll Set of 10 $1375 set Alternative to rubber Suits Agco S77 Replaces Original Part: Rubber ARN-SS50 Stainless Steel Accelerator Roll Full Set $700 set Alternative to rubber Suits Agco R40 R50 R42 R52 Replaces Original Part: Rubber bwmf-760 Walker Blocks $65 Suits Original Part: M92 Macdon Draper Platform HPMD-0532 Comer Macdon Knife Drive Box $2500 Suits Macdon Case-IH Original Part: A1 HPMD-6320 Macdon Knife Drive Box JD Type $1950 Suits Macdon 960 Case-IH 1040 Original Part: NEW 94 Prices exclude GST

95 parts return policy 1. Within 30 days of invoice date - No penalty (provided our suppliers don t charge a penalty) days plus of invoice date - A restocking fee may be charged depending on circumstances. 3. After 90 days - Non-refundable. Special Buy-in items or made to order items are non-refundable. TRACTOR PARTS CATAlOgue For a full range of Tractor Parts see our 2017 Catalogue 2017 PHONE: FAX: sales@harvestaire.com.au harvestaire.com.au Since 1980 warranty Harvestaire warrant that it will repair or replace (whichever it deems advisable) any product manufactured and sold by it which it proves to be defective in material or workmanship within a period of one year for new parts from the date of original purchase. Warranty service can be obtained by returning any defective product to Harvestaire. A purchase receipt or other proof of original purchase may be required before warranty service is rendered. If found defective under the terms of this warranty, repair or replacement will be made, without charge, together with a refund for transportation costs. If found not to be defective you will be notified and, with your consent, returned to you at your expense. The warranty covers normal use and does not cover damage or defect which results from alteration, accident, neglect or improper installation, operation or maintenance. Harvestaire s obligation under this warranty is limited to the repair of replacement of the defective product (up to maximum purchase price). Harvestaire neither assumes or authorises any other person to give any other warranty or to assume any other obligation or liability on its behalf. Parts in this catalogue are not manufactured by the Original Equipment Manufacturer. Original Equipment Manufacturers names, part numbers and descriptions are quoted for reference purposes only. harvestaire.com.au

96 PHONE: FAX: Mumford Place, Balcatta, Western Australia 6021 harvestaire.com.au