AFTERMARKET PRICE GUIDE 2018

Size: px
Start display at page:

Download "AFTERMARKET PRICE GUIDE 2018"

Transcription

1 AFTERMARKET PRICE GUIDE 2018 Orbit TM Trac II Reels - Flip Reel Kit Tines - Paddle Tine Gateway Sieves/Chaffers Level II Reels Level II / ML Service Parts HCC, inc First Ave. Mendota, IL, Effective January 1, 2018 (815)

2

3 2018 Aftermarket Price Guide Table of Contents GENERAL ORBIT TM TRAC II REELS FLIP REEL KIT TINES PADDLE TINE GATEWAY SIEVES/CHAFFERS LEVEL II REELS LEVEL II REELS - DIAGRAM & GUIDE SERVICE PARTS ML SERVICE PARTS CHANNEL BATS Effective January 1, 2018

4 Aftermarket Price Guide HCC, inc., a major innovator in the combine industry. Ordering - Payment HCC, inc. business hours are 7:00 AM - 4:00 PM (CST), Monday through Friday Orders may be placed by the following: ctowne@hccinc.com Fax: (815) Mail: st. Ave, Mendota, IL All orders must be placed through authorized HCC Distributors Minimum Order: $50.00 Prices and Specifications Prices and specifi cations are subject to change without notice. All prices are F.O.B Mendota, IL. This price guide supersedes all other HCC, inc. Aftermarket Price Guides. Shipping - Shipping Claims Orders in most instances will be shipped United Parcel Service (UPS) unless specifi ed differently by the customer. Total size and weight of order can also cause the order to be shipped via commercial Truck. Shipping will be charged on all shipments. Please check immediately upon receipt and report any error at once. If a part of the shipment is missing or received in bad condition, you must note this fact on the carrier's receipt and make a claim with the carrier immediately. Consignee is responsible for the damaged freight if the bill of lading is signed upon delivery. Be certain to sign for the correct number of cartons. Returns Policy All merchandise being returned must have a Return Goods Authorization number (RGA#) which is obtained by contacting HCC, inc. Must provide the original PO and explanation of the return to receive the RGA#. All shipping cost are the responsibility of the Distributor unless it was determined there was a shipping error on HCC's part or a warranty issue. Returns must be in good condition, excluding warranty items. No returns will be accepted on special items ordered. The following schedule will apply to all authorized returns (excluding shipping error and/or warranty items): Days of Delivery Restocking Fee 30 days Full refund 30 days - 1 year 20% 1 yrs. - 2 yrs. 30% 2 yrs. - 3 yrs. 40% After 3 years No Returns All warranty issues must follow HCC, inc procedures before returning the product. NO Exception. Obtain procedures by contacting HCC, inc. All merchandise shipped to HCC, inc without prior authorization is subject of refusal and my be returned freight collect. 1-1 Effective January 1, 2018

5 HCC, inc First Ave. Mendota, IL Phone: (815) Fax: (815) Limited Warranty HCC, inc. warrants each new HCC, inc. product to be free from defects in material and workmanship. This warranty is applicable only for the normal service life expectancy of the product or components, not to exceed 12 consecutive months from the date of delivery of the new HCC, inc. product to the original purchaser. Genuine HCC, inc. replacement parts and components will be warranted for 90 days from date of purchase, or the remainder of the original equipment warranty period, whichever is longer. There is no warranty for tines. Under no circumstances will this warranty cover any merchandise or components thereof, which, in the opinion of the company, has been subjected to misuse, unauthorized modifi cations, alteration, an accident, or if repairs have been made with parts other than those obtainable through HCC, inc. Our obligation under this warranty shall be limited to repairing or replacing, free of charge to the original purchaser, any part that, in our judgment, shall show evidence of such defect, provided further that such part shall be returned within thirty (30) days from date of failure to HCC, inc., routed through the dealer and distributor from whom the purchase was made, transportation charges prepaid. This warranty shall not be interpreted to render HCC, inc. liable for injury or damages of any kind or nature to person or property. This warranty does not extend to the loss of crops, loss because of delay in harvesting, or any expense or loss incurred for labor, substitute machinery, rental, or for any other reason. Except as set forth above, HCC, inc. shall have no obligation or liability of any kind on account of any of its equipment and shall not be liable for special or consequential damages. HCC, inc. makes no other warranty, expressed or implied, and specifically, HCC, inc. disclaims any implied warranty of merchantability or fitness for a particular purpose. Some states or provinces do not permit limitations or exclusions of implied warranties or incidental or consequential damages, so the limitations or exclusion in this warranty may not apply. This warranty is subject to any existing conditions of supply which may directly affect our ability to obtain materials or manufacture replacement parts. HCC, inc. reserves the right to make improvements in design or changes in specifi cations at any time, without incurring any obligation to owners of units previously sold. No one is authorized to alter, modify, or enlarge this warranty nor the exclusion, limitations, and reservations. Effective with products delivered to original user on or after January 1, Effective January 1,

6 Orbit TM Trac II Reels OEM Replacement Parts Positively places crop into auger Reduces or eliminates slugging Resists wrapping in green crop On-farm installation in a few hours Harvest more crop in less time. The Orbit TM Trac II Reel closes the gap between the reel and the auger to provide more control of crop entry into the header. By creating a continuous crop fl ow, the Orbit TM Trac II Reel provides the best overall performance, especially harvesting tough crops. Construction and Operation The Orbit TM Trac II Reel is tailored to today s high-performance headers. Crop fl ow is positive. Build-up and slugging are reduced. The old-fashioned reel design has been replaced with a double-track system. The unique shape allows reel tines to swing directly past the auger. This pushes crop directly into the auger instead of dropping onto the header fl oor where it creates build-up. No more heavy build-up and no more slowing down to handle tough crops. Orbit TM Trac II Reel Standard Reel Installation is easy and can be done on equipment you already own. Designed as a retro-fi t for all HCC tubetype reels built since ML 4-1/2 tine spacings or Level II 6 tine spacings are designed to work with the Orbit Kit. You can install it yourself in just a few hours, using the C-1096 Installation Instruction Manual. 2-1 Effective January 1, 2018

7 HCC, inc., the original reel people and a leading manufacturer of combine components in North America. Orbit Trac II Reel - Price List Description Part No List Price AGCO 4 AGCO/MF 8200 Series, 25' & longer (DBL) $ 2, AGCO/MF 8200 Series, 22' & shorter, (SGL) $ 1, AGCO 400, 500, 800, 8000 Series 25' & longer (DBL) $ 2, AGCO 400, 500, 800, 8000 Series 22' & shorter (SGL) $ 1, MF Draper (DBL) $ 2, MF 1859 (SGL) $ 1, CASEIH 5 CASEIH & prior - 22' & longer $ 2, CASEIH & prior - 20' & shorter $ 1, CASEIH ' & longer $ 2, CASEIH ' & shorter $ 1, CASEIH & Newer - 22' & longer $ 2, CASEIH & Newer - 20' & shorter $ 1, CASEIH ' - 35' (DBL) $ 2, CASEIH ' & shorter (SGL) $ 1, CASEIH ' & shorter (SGL) $ 1, CASEIH ' - 35' (DBL) $ 2, Honey Bee Honey Bee (DBL) $ 2, John Deere JD 900 Series - 25' and longer (DBL) $ 2, JD 900 Series - 22' and shorter (SGL) $ 1, JD 600 Series - Auger - 25' and longer (DBL) $ 2, JD 600 Series - Auger - 22' and shorter (SGL) $ 1, JD 640 Flex Draper - 40' $ 2, New Holland NH 72C & 74C - 22' - 35' (DBL) $ 2, NH 72C & 74C - 20' & shorter (SGL) $ 1, NH 73C - 22' & longer (DBL) $ 2, NH 73C - 20' & shorter (SGL) $ 1, NH 971/973-25' & longer (DBL) $ 2, NH 971/973-22' & shorter (SGL) $ 1, NH CF740-20' & shorter (SGL) $ 1, NH CF740-22' & longer (DBL) $ 2, Orbit Trac II Steel Track Orbit Trac II Steel Track Update Package $ For 1010 headers with S/N below JJC , For 1020 headers with S/N below JJC (1994 and prior). 2 For 1010 headers with S/N JJC & CBJ and up, For 1020 headers with S/N JJC & CBJ and up (1998 and later). 3 For 1010 headers with S/N JJC JJC , For 1020 headers with S/N JJC JJC ( ). 4 Fits 400 Series and newer. 25 and longer fi t Verify single or double eccentric reel. Note: The OrbitTM Trac II Reel is designed only for Level II and ML HCC, inc. tubetype reels. They are original equipment on above headers since Effective January 1,

8 HCC, inc., the original reel people and a leading manufacturer of combine components in North America. Orbit Trac II Reel - Complete Reels Price List Description Part No List Price 2018 Total List AGCO 25' & 30' Orbit Attaching Package $ 4, $ 6, ' Reel Bat Package - Level II* $ 2, ' Reel Bat Package - Level II $ 2, $ 6, ' & 30' Orbit Attaching Pkg Model $ 4, $ 6, ' Reel Bat Package - Level II* $ 2, ' Reel Bat Package - Level II $ 2, $ 6, ' Orbit Attaching Package Model $ 5, $ 8, ' Reel Bat Package - Level II Model $ 3, CASEIH ' & 30' Orbit Attaching Package $ 4, ' Reel Bat Package - Level II* $ 2, $ 6, ' Reel Bat Package - Level II $ 2, $ 7, CASEIH ' & 30' Orbit Attaching Package $ 4, ' Reel Bat Package - Level II* $ 2, $ 6, ' Reel Bat Package - Level II $ 2, $ 6, ' Orbit Attaching Package $ 5, ' Reel Bat Package - Level II $ 3, $ 9, CASEIH 3020 / CNH CF740 25' & 30' Orbit Attaching Package $ 4, ' Reel Bat Package - Level II* $ 2, $ 6, ' Reel Bat Package - Level II $ 2, $ 7, ' Orbit Attaching Package $ 5, ' Reel Bat Package - Level II $ 3, $ 9, John Deere ' & 30' Orbit Attaching Package $ 4, ' Reel Bat Package - Level II* $ 2, $ 6, ' Reel Bat Package - Level II $ 2, $ 6, ' Orbit Attaching Package $ 5, ' Reel Bat Package - Level II $ 3, $ 9, John Deere ' & 30' Orbit Attaching Package $ 4, ' Reel Bat Package - Level II* $ 2, $ 6, ' Reel Bat Package - Level II $ 2, $ 6, For headers with S/N JJC & CBJ and later. * Using 25' - Will be extra parts - Reel Arms, Anchor Plates. 2-3 Effective January 1, 2018

9 HCC, inc., the original reel people and a leading manufacturer of combine components in North America. Orbit Trac II Reel - Service Parts - Brackets Price List 2018 Part No. Description Orbit Reel Kit Item No. List Price AGCO AGCO - Bracket LH , , $ AGCO - Bracket RH , $ AGCO - Bracket LH $ AGCO - Bracket RH $ AGCO - Bracket LH , , , $ AGCO - Bracket RH , , $ MF Bracket LH $ CASEIH CASEIH - Bracket LH , , $ CASEIH - Bracket RH , $ CASEIH - Bracket LH , $ CASEIH - Bracket RH $ CASEIH - Bracket LH , $ CASEIH - Bracket RH $ CASEIH - Bracket LH , , , $ CASEIH - Bracket RH , , $ CASEIH/New Holland CASEIH/NH Bracket LH , , , , , $ CASEIH/NH Bracket RH , , , $ Honey Bee HB - Bracket LH $ HB - Bracket RH $ John Deere JD900 Bracket LH , $ JD900 Bracket RH , , $ JD600 Bracket LH , , , $ JD600 Bracket RH , , $ New Holland NH Bracket LH , $ NH Bracket RH $ Note: See installation/assembly procedure and parts book (C ). Effective January 1,

10 HCC, inc., the original reel people and a leading manufacturer of combine components in North America. Orbit Trac II Reel - Service Parts - Price List 2018 Part No. Description Item No. List Price Main Support Section - Orbit Before Jan 1, All Plastic A $ Main Support Section - Orbit Trac II After Jan 1, lower steel track - upper plastic A $ Front Support Section All Orbit Kit Part number on Pg 2-2 B $ Rear Support Section * All Orbit Kit Part number on Pg 2-2 C $ Connecting Plate* All Orbit Kit Part number on Pg 2-2 D $ Support Hub Assy - RH , , , , , , E $ Support Hub Assy - LH , , , , , E $ Support Hub Assy - RH , , , , E $ Support Hub Assy - RH E $ Support Hub Assy - LH , E $ Support Hub Assy - LH , E $ Support Hub Assy - LH E $ Support Hub Assy - RH E $ Support Hub Assy - LH (JD 40' Draper only) , E $ Support Hub Assy - LH (JD 25'-35' Draper only) E $ Support Hub Assy - RH (JD 40' Draper only) E $ Support Hub Assy - RH E $ Support Hub Assy - LH E $ Inner Section (Composite Roller Track) * All Orbit Kit Part number on Pg $ Outer Section (Composite Roller Track) * All Orbit Kit Part number on Pg $ RH Inner Action Section - Orbit Before Jan 1, All Plastic 5 $ RH Outer Action Section - Orbit Before Jan 1, All Plastic 6 $ RH Inner Action Section - Orbit TracII , , , , , , , , , $ RH Outer Action Section - Orbit TracII , , , , , , , , , $ LH Inner Action Section - Orbit Before Jan 1, All Plastic Main Support 7 $ LH Outer Action Section - Orbit Before Jan 1, All Plastic Man Support 8 $ LH Inner Action Section - Orbit TracII , , , , , , $ LH Outer Action Section - Orbit TracII , , , , , , $ Screw - Flathead Socket Cap M10X45) * 9 $ Spacer (19.5 x 12.7 x 18.3) * 10 $ Nut - Prev. Torq. Hex Lock (M10)* 11 $ Bearing - Roller Ball (ML,LII,Orbit)* Required Box Quantity $ Spacer - Tubing (.75"X2.06") * 14 $ Roller - Reel Support * 15 $ 6.14 * Can be used for both Orbit Track and Orbit Trac II Note: See installation/assembly procedure and parts book (C ). 2-5 Effective January 1, 2018

11 HCC, inc., the original reel people and a leading manufacturer of combine components in North America. Orbit Trac II Reel - Service Parts - Price List 2018 Part No. Description Item No. List Price Bolt - Hex Head (3/8-16X1.0") JD 900 Series only 17 $ Bracket - Stop Top Reverse * 22 $ Bracket - Stop Bottom Reverse * 23 $ Bolt - Hex Head (M10X70) * 24 $ Washer - Belleville (12mm) * 25 $ Bolt - Carriage (M12X1.75X40) 30 $ Bolt - Hex Head (M10X25) * 31 $ Nut - Hex (M12X1.75) 32 $ 1.19 * Can be used for both Orbit Track and Orbit Trac II Note: See installation/assembly procedure and parts book (C ). Effective January 1,

12 Flip Reel Kit OEM Replacement Parts Eliminates crop wrapping around bat tubes Designed to fit HCC tube type reels built since 1990 To improve performance in some crop conditions, end shield may be desired. Construction and Operation The Flip Reel Kit is designed to eliminate wrapping around bat tubes and is particularly effective in canola and other tall, stringy crops. Installation is easy and can be done on equipment you already own. Designed as a retro-fi t for all HCC tube-type reels built since ML 4-1/2" tine spacing or Level II 6" tine spacings are designed to work with the Orbit Kit. You can install it yourself in just a few hours using the Installation Instruction Manual. Flip Reel Standard Reel 3-1 Effective January 1, 2018

13 HCC, inc., the original reel people and a leading manufacturer of combine components in North America. Flip Reel Kit - Price List 2018 Part No. Description List Price AGCO AGCO 8200, Auger (35'- 40') (DBL ECC)* $2, AGCO 8200, Auger 22' & shorter (SGL ECC) $1, AGCO 400, 500, 800, 8000 Series, 25' & longer (DBL) $1, AGCO 400, 500, 800, 8000 Series, 22' & shorter (SGL) $1, AGCO 5000(36'), 8000 Series - Draper (DBL ECC) $2, AGCO 8000 Series - Draper (SGL ECC) $1, CNH CNH 1010,1020, ' & longer (DBL ECC) $2, CNH 1010,1020, ' & shorter (SGL ECC) $1, CNH 2010, ' & longer (DBL ECC) $2, CNH 2010, ' & shorter (SGL ECC) $1, Honey Bee HB - Clamp Mounting - 25' & longer (DBL ECC) $2, HB - Bracket Mounting - 25' & longer (DBL ECC) $2, John Deere JD900 Series - Auger - 25' & longer (DBL ECC) $2, JD900 Series - STD Reel - 22' & shorter (SGL ECC) $1, JD600 Auger only - JD 900 Draper only - 25' & longer $2, JD600 Series - STD Reel - 22' & shorter (SGL ECC) $1, JD625, JD630, JD635 - Draper (DBL ECC) $2, JD640D, JD 645FD - Draper (Split) $2, New Holland NH 72C,74C - 25' & longer (DBL) $2, NH 72C,74C - 22' & shorter (SGL) $1, NH 971,973,73C - 25' & longer (DBL) $1, NH 971, 973, 73C, 740CF - 22' & shorter (SGL) $1, NH 740CF - 25' & longer (DBL) $2, * Clamp mount only Effective January 1,

14 HCC, inc., the original reel people and a leading manufacturer of combine components in North America. Flip Reel Service Parts 2018 Part No. Description Flip Kits Item No. List Price Ring - Ecc. Control (Flip-ML6) 1 $ Ring - Ecc. Center Arm Att. (Replaced ) 2 $ Arm - Fixed Assy w/ Male-Female Ecc. Bearings 3 $ Arm - Pivot Assy w/ Male-Female Ecc. Bearings 4 $ Arm - Flip Reel Ecc. 5 $ Bearing - Male Threaded Ecc. (Plastic) 6 $ Bearing - Female Threaded Ecc. (Plastic) 7 $ Screw - Socket Head Shoulder (M12X1.75X50) 8 $ Spacer (19.05X12.70X26.00) 9 $ Frame Assy - Ecc. Roller (Flip) , , , $ Frame Assy - Ecc. Roller (Flip) , $ Frame Assy - Ecc. Roller (Flip) , $ Frame Assy - Ecc. Roller (Flip) $ Frame Assy - Ecc. Roller (Flip) , $ Frame Assy - RH Ecc. Roller (Flip) $ Frame Assy - LH Ecc. Roller (Flip) , $ Frame Assy - LH Ecc. Roller (Flip) , $ Frame Assy - Ecc. Roller RH (Flip) $ Frame Assy - RH Ecc. Roller (Flip) $ Spacer - Fixed Arm (Flip) 11 $ Note: See instruction/assembly procedure and parts book section (C-1158 Sept. 2013) Page 7 End Shield - Will Fit All Flip Reels 2018 Part No. Description List Price End Shield - Double $ End Shield - Single $ Shield Section - Flip Reel End $ Arm Shield Att. $ Note: Instruction C-1179 & C Effective January 1, 2018

15 NOTES Effective January 1,

16 Tines OEM Replacement Parts Construction 4-1 Effective January 1, 2018

17 Tines OEM Replacement Parts Tines Price List Part No. Reel Type Description Qty List Price LII - 6" Plastic Finger Tines - Heavy Duty* Box $ LII - 6" Screw for Heavy Duty Tines* 500 Box $ LII - 6" Plastic Fgr. Repair - Full Bat - Pipe Type* 130 Box $ LII - 6" Plastic Fgr. Repair - LH Bat - Pipe Type* 150 Box $ LII - 6" Plastic Fgr. Repair - RH Bat - Pipe Type* 150 Box $ LII - 6" Plastic Fgr. Repair - No Bat - Pipe Type* 150 Box $ LII - 6" Screw for plastic tines 1 (3.5 x 1.3 x 16mm)* 500 Box $ ML - 4.5" Plastic Fgr. Repair - Full Bat - Pipe Type* 180 Box $ ML - 4.5" Plastic Fgr. Repair - RH Bat - Pipe Type* 250 Box $ ML - 4.5" Plastic Fgr. Repair - LH Bat - Pipe Type* 250 Box $ ML - 4.5" Plastic Fgr. Repair - No Bat - Pipe Type* 250 Box $ ML - 4.5" Screw for plastic tines 1 (3.5 x 1.3 x 16mm)* 500 Box $ Polytine Plastic Fgr. Repair - 10 pk of w/ screws* 10 Pkg. $ Polytine Plastic Fgr. Repair pk of w/ screws* 500 Box $ Polytine Screw for plastic tines 1 (8.32 x.75) $ LOVE Plastic Fgr. Repair - 10 pk of w/ screws* 10 Pkg. $ LOVE Plastic Fgr. Repair pk of w/ screws* 275 Box $ LOVE Screw for plastic tines 1 (6 x.62) $ Wood Bat Steel Tine Bat $ Wood Bat Steel Tine Clip $ 0.29 * Order as each - must meet box quantity 1 Screws no longer offered with tines - order separately. 2 Fits any HCC 1-3/8" diameter tube with hex hub attachment. Effective January 1,

18 Tines Service Parts OEM Replacement Parts Miscellaneous Tine Price List Plastic Fingers 2018 Part No. Description List Price KIT-Plastic Aux. Pickup Tines (12 count of w/ hardware) $ KIT-Screws #10 for Polytines (50 Screws) $ KIT-Finger (6 EA , , with screws) $ Finger - Plastic Aux. $ Finger - Polytine for Tear Drop Bats (Replaces ) $ Finger - Plastic Repair (JI) $ Finger - Plastic Aux. Retainer $ Finger - Plastic Aux. Bracket $ Steel Fingers 2018 Part No. Description List Price KIT-Pkg. Aux. Steel Pickup (6 RH & 6 LH ) $ KIT-Pkg. Hdw Bushing Conversion Kit (Removing ML5 & ML6 Bat Fingers) $ Tine - Steel, Double Coil (Over Center Mount) $ Tine - Steel, Single Coil (Over Center Mount) $ Tine - Steel - LH (8", LVL II) (Replaced ) $ Tine - Steel - RH (8", LVL II) (Replaced ) $ Tine - Steel - LH (9", LVL II ) (2004 and later) $ Tine - Steel - RH (9", LVL II) (2004 and later) $ Tine - Steel Aux. RH Pickup Finger $ Tine - Steel Aux. LH Pickup Finger $ Tine - Steel Aux. RH Pickup Finger Assy. $ Tine - Steel Aux. LH Pickup Finger Assy. $ Tine - Steel Aux. LH Pickup Finger Assy. $ Tine - Steel Aux. RH Pickup Finger Assy. $ Tine - Steel Aux. RH Assy. SP $ Tine - Steel Aux. LH Assy. SP $ Effective January 1, 2018

19 NOTES Effective January 1,

20 Paddle Tine Tine Replacement System OEM Replacement Parts The Paddle is a cost-effective alternative to the standard pickup reel tine when crop conditions make harvesting difficult and inefficient. Construction and Operation The Paddle s 6 width lifts and feeds crop that standard tines miss. With full crop contact, feeding into the header is positive and even. Increase your harvest in light, sparse, or special crop conditions. The Paddle is designed to provide a complete sweep of the header with each reel rotation. By limiting the number of Paddles used, you save installation time and money. Increased harvest Improved feeding Cleaner cutterbar Faster harvesting Installation Installation is fast and easy with HCC s patented tine mounting system. Remove one screw and replace the standard tine with a Paddle tine. In less than one hour, you can easily replace enough standard tines with Paddle tines to dramatically improve your harvest. Original tines can be used for spares or reinstalled, as needed. 5-1 Effective January 1, 2018

21 HCC, inc., the original reel people and a leading manufacturer of combine components in North America. Specifications Recommended Number of Paddles (sweeps header completely with each rotation of the reel) Original Tine Spacing Reel Width 18' 20' 25' 30' 36' Number of Paddles 4.5" N/A 6.0" Note: Individual preferences or conditions may call for increasing the number of Paddles or altering the installation pattern. Note: 4.5 spacing includes wood bat, polytine, and ML reels. 6.0 spacing is for the LII reel. Parts and Price List Paddles are not sold individually. Part numbers and prices are for a box of 10 paddles, and includes screws and complete installation instructions. Description Part No List Price For Polytine (Teardrop Bat) $ For ML reel - 4.5" tine spacing $ For LII reel - 6.0" tine spacing $ For Wood Bat Reels $ Polytine reels supplied from ML reels supplied LII reels are standard since 1999/2000. Effective January 1,

22 Gateway Sieves Durable Plastic Sieves and Chaffers OEM Replacement Parts Lightweight Rustproof Less chaff build-up Improved grain cleaning Infinitely adjustable slats The top unit, the chaffer, separates the larger material from the grain. The grain and small particles fall onto the bottom unit, the sieve. Air blowing through the units separates the lighter chaff from the grain, blowing the chaff out the back of the combine. Easy to repair GATEWAY Shipping Cartons Large Box 83-1/2 x 63-1/2 x lbs. Small Box 68-1/2 x 48-1/4 x /4 lbs. Construction and Operation The Gateway Sieves aluminum / plastic construction is up to 50% lighter than most OEM steel frame construction, making it easier to change sieves and chaffers for various crops. This is especially important when harvesting a variety of grains in all types of crop and weather conditions. Our smooth, plastic slats offer less resistance than conventional steel teeth, which helps prevent build-up. They perform well when cleaning both lighter crops (small grain) and heavy crops (high-yield corn). Easy-to-use adjuster(s) on each frame allow you to quickly and accurately change the louver angle. Depending on the combine model, more than one adjuster may be used. Due to the thickness of the plastic louvers (thicker than steel), the louver spacing has been increased; however, the openings between the rows (row-to-row spacing) remain the same. Sieves and chaffers are available in two row-to-row spacing widths, depending on the crop being harvested. Wide spaced units, 45 mm (compares to 1-5/8 ), are used for crops such as high-capacity corn and soybeans. The wider spacing allows more grain to fl ow through the frame, but prevents stems or cobs from falling through. The narrow spaced units, 33 mm (compares to 1-1/8 ), are used for smaller cereal grains, and provide more thorough cleaning of the grain. 6-1 Effective January 1, 2018

23 HCC, inc., the maker of virtually all original equipment sieves and chaffers. As a result, fit and function of replacement parts is guaranteed to meet or exceed original equipment standards. Tooth Design and Modular Construction Currently, two tooth lengths are offered. A 3/8 short tooth (ST) and a 7/8 long tooth (LT). The standard chaffer is offered with the long tooth and can also be used in place of a deep tooth (1-1/4 ) slat. Modular construction allows for easy and cost-effective repair. All components on Gateway Sieves are replaceable for fast, economical repair. Slat connectors allow consistent and precise slat adjustment for infi nite angles and optimal cleaning performance. Optional Divider Riser Kit (002641) Gateway Sieves are equipped with aluminum dividers to channel grain into the individual panels, promoting an even fl ow through the cleaning process. For side hill conditions, the Divider Riser kit is available to mount your existing risers and prevent grain from fl owing over the top of the dividers. Each kit comes with 12 clips and 24 rivets. (Divider risers not included.) Effective January 1,

24 HCC, inc., the maker of virtually all original equipment sieves and chaffers. As a result, fit and function of replacement parts is guaranteed to meet or exceed original equipment standards. Gateway Application Guide Chaff - Top Unit LT - Long Tooth 7/8" Wide Spacing (45mm; similar to 1-5/8") - (similar to 7/8" and 1-1/4" steel) faster operation through high capacity corn. Sieve - Bottom Unit LT - Long Tooth 7/8" Wide Spacing (45mm; similar to 1-5/8") - (similar to 7/8" steel) faster operation through high capacity corn. Sieve - Bottom Unit ST - Short Tooth 3/8" Narrow Spacing (33mm; similar to 1-1/8") - (similar to 3/8" steel) both small (wheat, alfalfa, cereal grains) and large (corn, soybeans) crops. RH-Right Hand (viewed from driver's seat) LH-Left Hand (viewed from driver's seat) Row-to-Row - Distance between slat rows *HCC suggest replacing the OEM steel frame with the spacing and slat described above which most closely matches the original equipment. The chart below may also be used as a reference, however if the current steel frame is successful - match as indicated above. Chaffer Sieve Corn 45LT 33LT¹ or 45LT³ Soybean 33LT 33ST¹ or 33LT Wheat 33ST¹ or 33LT³ 33ST¹ or 33LT Corn & Soybean 33LT² or 45LT 33LT¹ or 45LT³ Corn & Wheat 33LT² or 45LT 33ST¹ ² or 33LT Corn, Soybean, Wheat 33LT² or 45LT 33ST¹ ² or 33LT Soybean & Wheat 33LT 33ST Other Small Grains 33ST 33ST 1 Lower yields / trashy conditions. 2 Greater percentage of wheat and or soybeans. 3 High yields - greater than 180 bushels corn per acre (large capacity machines). 6-3 Effective January 1, 2018

25 Gateway Durable Plastic Sieves and Chaffers OEM Replacement Parts Description OEM Part No. Frame Size Wt. Panels Adjustments Row-to-Row Tooth Gateway 2018 Parts Replc. # / Orig. # Replc. # / Orig. # Part No. List Price Manual AGCO-Massey , Electric Adjust Top Chaffer LT - 4P x /6 1/1 45 mm (1-5/8") long $1, C-1104 Top Chaffer LT - 4P x /6 1/1 33 mm (1-1/8") long $2, C-1104 Bottom Sieve ST - 4P x /6 1/1 33 mm (1-1/8") short $1, C-1104 Bottom Sieve LT - 4P x /6 1/1 33 mm (1 1/8") long $1, C-1104 d Bottom Sieve LT - 4P 6 N/A x /6 1/1 45 mm (1-5/8") long $1, C-1104 d AGCO-Massey Electric Adjust Top Chaffer LT - 3P x /5 1/1 45 mm (1-5/8") long $1, C-1102 Top Chaffer LT - 3P x /5 1/1 33 mm (1-1/8") long $1, C-1102 Bottom Sieve ST - 3P x /5 1/1 33 mm (1-1/8") short $1, C-1102 d Bottom Sieve LT - 3P x /5 1/1 33 mm (1-1/8") long $1, C-1102 d Bottom Sieve LT - 3P 6 N/A x /5 1/1 45 mm (1-5/8") long $1, C-1102 d AGCO-Massey , 9895; Challenger - 670B, 680B ; Gleaner A76, A85, A86; - Electric Adjust Top Chaffer LT - 4P x /6 1/1 45 mm (1-5/8") long $1, C-1104 Top Chaffer LT - 4P x /6 1/1 33 mm (1-1/8") long $2, C-1104 Bottom Sieve ST - 4P x /6 1/1 33 mm (1-1/8") short $1, C-1104 d Bottom Sieve LT - 4P x /6 1/1 33 mm (1 1/8") long $1, C-1104 d Bottom Sieve LT - 4P 6 N/A x /6 1/1 45 mm (1-5/8") long $1, C-1104 d AGCO-Massey , 9795, 9895; Challenger - 670, 680; Gleaner - A75 - Manual Adjust Top Chaffer LT - 4P x /6 1/1 45 mm (1-5/8") long $1, C-1104 Top Chaffer ST - 4P x /6 1/1 33 mm (1-1/8") short $2, C-1104 Top Chaffer LT - 4P x /6 1/1 33 mm (1-1/8") long $2, C-1104 Bottom Sieve ST - 4P x /6 1/1 33 mm (1-1/8") short $1, C-1104 d Bottom Sieve LT - 4P x /6 1/1 33 mm (1 1/8") long $1, C-1104 d Bottom Sieve LT - 4P 6 N/A x /6 1/1 45 mm (1-5/8") long $1, C-1104 d AGCO-Massey ; Gleaner - A65, A66; Challenger - 660B - Electric Adjust Top Chaffer LT - 3P x /5 1/1 45 mm (1-5/8") long $1, C-1102 Top Chaffer LT - 3P x /5 1/1 33 mm (1-1/8") long $2, C-1102 Bottom Sieve ST - 3P x /5 1/1 33 mm (1-1/8") short $1, C-1102 d Bottom Sieve LT - 3P x /5 1/1 33 mm (1-1/8") long $1, C-1102 d Bottom Sieve LT - 3P 6 N/A x /5 1/1 45 mm (1-5/8") long $1, C-1102 d HCC, inc., the maker of virtually all original equipment sieves and chaffers. As a result, fit and function of replacement parts is guaranteed to meet or exceed original equipment standards. Effective January 1,

26 Gateway Durable Plastic Sieves and Chaffers OEM Replacement Parts Description OEM Part No. Frame Size Wt. Panels Adjustments Row-to-Row Tooth Gateway 2018 Parts Replc. # / Orig. # Replc. # / Orig. # Part No. List Price Manual AGCO-Massey , 9690, 9695; Challenger - 660; Gleaner - A65, A66 - Manual Adjust Top Chaffer LT - 3P x /5 1/1 45 mm (1-5/8") long $1, C-1102 Top Chaffer ST - 3P x /5 1/1 33 mm (1-1/8") short $1, C-1102 Top Chaffer LT - 3P x /5 1/1 33 mm (1-1/8") long $1, C-1102 Bottom Sieve ST - 3P x /5 1/1 33 mm (1-1/8") short $1, C-1102 d Bottom Sieve LT - 3P x /5 1/1 33 mm (1-1/8") long $1, C-1102 d Bottom Sieve LT - 3P 6 N/A x /5 1/1 45 mm (1-5/8") long $1, C-1102 d AGCO-Gleaner - R66, R76, S67, S77 - Electric Adjust Top Chaffer S67 45LT - 4P x /5 1/1 45 mm (1-5/8") long $1, C-1104 Top Chaffer S67 33LT - 4P x /5 1/1 33 mm (1-1/8") long $1, C-1104 Bottom Sieve S67 33ST - 4P x /5 1/1 33 mm (1-1/8") short $1, C-1104 Bottom Sieve S67 33LT - 4P 6 N/A x /5 1/1 33 mm (1-1/8") long $1, C-1104 Bottom Sieve S67 45LT - 4P 6 N/A x /5 1/1 45 mm (1-5/8") long $1, C-1104 AGCO-Gleaner - R62 S/N and up, R72 S/N and up, R65, R66, R75, R76 - Manual Adjust Top Chaffer R75 45LT - 4P x /6 1/1 45 mm (1-5/8") long $1, C-1104 Top Chaffer R75 33ST - 4P x /6 1/1 33 mm (1-1/8") short $1, C-1104 Top Chaffer R75 33LT - 4P x /6 1/1 33 mm (1-1/8") long $1, C-1104 Bottom Sieve R75 33ST - 4P x /6 1/1 33 mm (1-1/8") short $1, C-1104 Bottom Sieve R75 33LT - 4P N/A x /6 1/1 33 mm (1-1/8") long $1, C-1104 Bottom Sieve R75 45LT - 4P N/A x /6 1/1 45 mm (1-5/8") long $1, C-1104 AGCO-Gleaner - R42 S/N and up, R52 S/N and up, R55 Top Chaffer R55 45LT - 3P x /4 1/1 45 mm (1-5/8") long $1, C-1102 Top Chaffer R55 33ST - 3P x /4 1/1 33 mm (1-1/8") short $1, C-1102 Top Chaffer R55 33LT - 3P x /4 1/1 33 mm (1-1/8") long $1, C-1102 Bottom Sieve R55 33ST - 3P x /4 1/1 33 mm (1-1/8") short $1, C-1102 Bottom Sieve R55 33LT - 3P N/A x /4 1/1 33 mm (1-1/8") long $1, C-1102 CASEIH , 6088, 7088, 5130, 6130, Electric Adjust (In Cab) Top Chaffer - 45LT - 4P ¹ x /6 3/3 45 mm (1-5/8") long $1, C-1108 g Top Chaffer - 33LT - 4P ¹ x /6 3/3 33 mm (1-1/8") long $1, C-1108 g Bottom Sieve - 33ST - 4P ¹ x /6 1/1 33 mm (1-1/8") short $1, C-1134 g Bottom Sieve - 33LT - 4P ¹ x /6 1/1 33 mm (1-1/8") long $1, C-1134 g Bottom Sieve - 45LT - 4P N/A x /6 1/1 45 mm (1-5/8") long $1, C-1134 g HCC, inc., the maker of virtually all original equipment sieves and chaffers. As a result, fit and function of replacement parts is guaranteed to meet or exceed original equipment standards. 6-5 Effective January 1, 2018

27 Gateway Durable Plastic Sieves and Chaffers OEM Replacement Parts Description OEM Part No. Frame Size Wt. Panels Adjustments Row-to-Row Tooth Gateway 2018 Parts Replc. # / Orig. # Replc. # / Orig. # Part No. List Price Manual CASEIH S/N JJC and up, 1688, 2188, 2377, 2388, 2577, Manual Remote & Electric Adjust; See Note #2 Page 6-10 Top Chaffer LT - 4P x /6 3/3 45 mm (1-5/8") long $1, C-1108 ce Top Chaffer ST - 4P x /6 3/3 33 mm (1-1/8") short $1, C-1108 ce Top Chaffer LT - 4P x /6 3/3 33 mm (1-1/8") long $1, C-1108 ce Bottom Sieve ST - 4P x /6 1/1 33 mm (1-1/8") short $1, C-1134 ce Bottom Sieve LT - 4P x /6 1/1 33 mm (1-1/8") long $1, C-1134 ce Bottom Sieve - 45LT - 4P N/A x /6 1/1 45 mm (1-5/8") long $1, C-1134 g CASEIH , 1666, 2144, 2166, 2344, 2366, 1660 S/N JJC and up; See Note #2 Page 6-10 Top Chaffer LT - 3P 3, C x /4 2/3 45 mm (1-5/8") long $1, C-1135 c Top Chaffer ST - 3P 3, C x /4 2/3 33 mm (1-1/8") short $1, C-1135 c Top Chaffer LT - 3P 3, C x /4 2/3 33 mm (1-1/8") long $1, C-1135 c Bottom Sieve ST - 3P C x /4 1/1 33 mm (1-1/8") short $1, C-1135 c Bottom Sieve LT - 3P C x /4 1/1 33 mm (1-1/8") long $1, C-1135 c CASEIH , 1666, 2144, 2166, 2344, 2366, 1660 S/N JJC and up - Side Hill Option; See Note #2 Page 6-10 Top Chaffer ST - 4P C x /4 2/3 33 mm (1-1/8") short $1, C-1133 c Top Chaffer LT - 4P C x /4 2/3 45 mm (1-5/8") long $1, C-1133 c Top Chaffer LT - 4P 2, C x /4 2/3 33 mm (1-1/8") long $1, C-1133 c CASEIH , 1482, 1680, prior to S/N JJC , 1682; See Note #2 Page 6-10 Top Chaffer S - 45LT - 4P C x /6 2/2 45 mm (1-5/8") long $1, C-1133 be Top Chaffer S - 33ST - 4P C x /6 2/2 33 mm (1-1/8") short $1, C-1133 be Top Chaffer S - 33LT - 4P C x /6 2/2 33 mm (1-1/8") long $1, C-1133 be Bottom Sieve S - 33ST - 4P C x /6 1/1 33 mm (1-1/8") short $1, C-1133 be Bottom Sieve S - 33LT - 4P C x /6 1/1 33 mm (1-1/8") long $1, C-1133 be CASEIH , 1440, 1460, 1640, 1660 Prior S/N JJC ; See Note #2 Page 6-10 Top Chaffer LT - 3P 3, C x /4 2/2 45 mm (1-5/8") long $1, C-1135 c Top Chaffer ST - 3P C x /4 2/2 33 mm (1-1/8") short $1, C-1135 c Top Chaffer LT - 3P C x /4 2/2 33 mm (1-1/8") long $1, C-1135 c Bottom Sieve ST - 3P C x /4 1/1 33 mm (1-1/8") short $1, C-1135 c Bottom Sieve LT - 3P C x /4 1/1 33 mm (1-1/8") long $1, C-1135 c CASEIH , 1440, 1460, 1640, 1660 Prior S/N JJC Side Hill Option; See Note #2 Page 6-10 Top Chaffer ST - 4P C x /4 2/2 33 mm (1-1/8") short $1, C-1133 c Top Chaffer LT - 4P C x /4 2/2 45 mm (1-5/8") long $1, C-1133 c Top Chaffer LT - 4P 2, C x /4 2/2 33 mm (1-1/8") long $1, C-1133 c HCC, inc., the maker of virtually all original equipment sieves and chaffers. As a result, fit and function of replacement parts is guaranteed to meet or exceed original equipment standards. Effective January 1,

28 Gateway Durable Plastic Sieves and Chaffers OEM Replacement Parts Description OEM Part No. Frame Size Wt. Panels Adjustments Row-to-Row Tooth Gateway 2018 Parts Replc. # / Orig. # Replc. # / Orig. # Part No. List Price Manual CASEIH , 8120, 9120, 7230, 8230, 9230; Electric Adjust - Requires two (side by side) New Holland - CR970, 980, 8070, 8090, 9070, 9080, 9090; CX820, 840, 860, 880, 8060, 8070, 8080, Electric Adjust - Requires two (side by side) & x /3 1/1 & 1/2 45 mm (1-5/8") long $ C-1100 f Top Chaffer - 45LT - 2P Top Chaffer - 33LT - 2P x /3 1/2 33 mm (1-1/8") long $1, C-1100 f Bottom Sieve - 33ST - 2P x /3 1/1 33 mm (1-1/8") short $1, C-1100 f Bottom Sieve - 33LT - 2P x /3 1/1 33 mm (1-1/8") long $ C-1100 f Bottom Sieve 45LT - 2P N/A x /3 1/1 45 mm (1-5/8") long $ C-1100 f CASEIH , 8120, 9120, 7230, 8230, 9230; Manual Adjust - Requires two (side by side) New Holland - CR970, 980, 8070, 8090, 9070, 9080, 9090; CX820, 840, 860, 880, 8060, 8070, 8080, Manual Adjust - Requires two (side by side) Top Chaffer LT - 2P & x /3 1/1 & 1/2 45 mm (1-5/8") long $ C-1100 Top Chaffer ST - 2P x /3 1/2 33 mm (1-1/8") short $ C-1100 Top Chaffer LT - 2P x /3 1/2 33 mm (1-1/8") long $ C-1100 Bottom Sieve ST - 2P x /3 1/1 33 mm (1-1/8") short $ C-1100 Bottom Sieve LT - 2P x /3 1/1 33 mm (1-1/8") long $ C-1100 Bottom Sieve LT - 2P N/A x /3 1/1 45 mm (1-5/8") long $ C-1100 CASEIH , 7120; Electric Adjust New Holland - CR920, 940, 960, 6090, 7090, 8080, 9040, 9060, 9065; CX720, 740, 760, 780, 8030, 8040, Electric Adjust Top Chaffer - 45LT - 4P x /5 1/1 45 mm (1-5/8") long $1, C-1104 f Top Chaffer - 45LT - 4P - 2 Adjust x /5 2/2 45 mm (1-5/8") long $1, C-1107 f Top Chaffer - 33LT - 4P x /5 1/2 33 mm (1-1/8") long $1, C-1104 f Bottom Sieve - 33ST - 4P x /5 1/1 33 mm (1-1/8") short $1, C-1104 f Bottom Sieve - 33LT - 4P x /5 1/1 33 mm (1-1/8") long $1, C-1104 f Bottom Sieve - 45LT - 4P N/A x /5 1/1 45 mm (1-5/8") long $1, C-1104 f CASEIH , Manual Adjust New Holland - CR920, 940, 960, 6090, 7090, 8080, 9040, 9060, 9065; CX720, 740, 760, 780, 8030, 8040, Manual Adjust Top Chaffer CR960 45LT -4P x /5 1/1 45 mm (1-5/8") long $1, C-1104 Top Chaffer CR960 33ST - 4P x /5 2/2 33 mm (1-1/8") short $1, C-1107 Top Chaffer CR960 33LT - 4P x /5 2/2 33 mm (1-1/8") long $1, C-1107 Bottom Sieve CR960 33ST -4P x /5 1/1 33 mm (1-1/8") short $1, C-1104 Bottom Sieve CR960 33LT - 4P x /5 1/1 33 mm (1-1/8") long $1, C-1104 Bottom Sieve CR960 45LT - 4P N/A x /5 1/1 45 mm (1-5/8") long $1, C-1104 New Holland - NH TR 96 and NH TR 99; (Verify measurement before ordering) Top Chaffer TR 96 45LT - 4P x /5 2/2 45 mm (1-5/8") long $1, C-1106 Top Chaffer TR 96 33ST - 4P x /5 1/1 33 mm (1-1/8") short $1, C-1106 Top Chaffer TR 96 33LT - 4P x /5 1/1 33 mm (1-1/8") long $1, C-1106 Bottom Sieve TR 96 33ST - 4P x /5 1/1 33 mm (1-1/8") short $1, C-1104 Bottom Sieve TR 96 33LT - 4P N/A x /5 1/1 33 mm (1-1/8") long $1, C-1104 New Holland - NH TR 96 Extension Top Chaffer Ext. TR 96 33LT - 4P x /5 1/1 33 mm (1-1/8") long $1, C Effective January 1, 2018

29 Gateway Durable Plastic Sieves and Chaffers OEM Replacement Parts Description OEM Part No. Frame Size Wt. Panels Adjustments Row-to-Row Tooth Gateway 2018 Parts Replc. # / Orig. # Replc. # / Orig. # Part No. List Price Manual John Deere - S650, S660, S670, S680, S690 - Electric Adjust; See Note #3 Top Chaffer - S-Series - 45LT - 4P AXE x /4 2/2 45 mm (1-5/8") long $1, C-1105 Top Chaffer - S-Series - 33LT - 4P AXE x /4 2/2 33 mm (1-1/8") long $2, C-1105 Bottom Sieve - S-Series - 33ST - 4P AXE x /4 1/1 33 mm (1-1/8") short $1, C-1105 Bottom Sieve - S-Series - 33LT - 4P AXE x /4 1/1 33 mm (1-1/8") long $1, C-1105 Bottom Sieve - S Series - 45LT - 4P N/A x /4 1/1 45 mm (1-5/8") long $1, C-1105 John Deere - STS 9650, 9660, 9670, 9750, 9760, 9770, 9860, Electric Adjust (In Cab) Top Chaffer - STS - 45LT - 4P AH x /4 1/1 45 mm (1-5/8") long $1, C-1105 Top Chaffer - STS - 33ST - 4P AH x /4 1/1 33 mm (1-1/8") short $1, C-1105 Top Chaffer - STS - 33LT - 4P AH x /4 1/1 33 mm (1-1/8") long $1, C-1105 Bottom Sieve - STS - 33ST - 4P AH x /4 1/1 33 mm (1-1/8") short $1, C-1105 Bottom Sieve - STS - 33LT - 4P AH x /4 1/1 33 mm (1-1/8") long $1, C-1105 Bottom Sieve - STS - 45LT - 4P N/A x /4 1/1 45 mm (1-5/8") long $1, C-1105 John Deere - STS 9650, 9660, 9670, 9750, 9760, 9770, Manual Adjust Top Chaffer - STS - 45LT - 4P AH x /4 1/1 45 mm (1-5/8") long $1, C-1105 b Top Chaffer - STS - 33ST - 4P AH x /4 1/1 33 mm (1-1/8") short $1, C-1105 b Top Chaffer - STS - 33LT - 4P AH x /4 1/1 33 mm (1-1/8") long $1, C-1105 b Bottom Sieve - STS - 33ST - 4P AH x /4 1/1 33 mm (1-1/8") short $1, C-1105 b Bottom Sieve - STS - 33LT - 4P AH x /4 1/1 33 mm (1-1/8") long $1, C-1105 b Bottom Sieve - STS - 45LT - 4P N/A x /4 1/1 45 mm (1-5/8") long $1, C-1105 b John Deere , 9610, 9650, 9660; See Note #1 Top Chaffer LT - 2P N//A x /3 1/1 45 mm (1-5/8") long $ C-1101 AH132784/ Top Chaffer ST - 2P AH149552, x /3 1/1 33 mm (1-1/8") short $ C-1101 AH132784/ Top Chaffer LT - 2P AH149552, x /3 1/1 33 mm (1-1/8") long $ C-1101 AH130159/ Bottom Sieve ST - 3P - RH AH x /3 1/1 33 mm (1-1/8") short $ C-1102 a AH130159/ Bottom Sieve ST - 3P - LH AH x /3 1/1 33 mm (1-1/8") short $ C-1102 a Bottom Sieve LT - 3P - RH N/A x /3 1/1 33 mm (1-1/8") long $1, C-1102 a Bottom Sieve LT - 3P - LH N/A x /3 1/1 33 mm (1-1/8") long $1, C-1102 a John Deere Incl. 10, 50, 60; See Note #1 Page 6-10 Top Chaffer LT - 2P N/A x /2 1/1 45 mm (1-5/8") long $ C-1101 AH132785/ Top Chaffer ST - 2P AH149553, x /2 1/1 33 mm (1-1/8") short $ C-1101 AH132785/ Top Chaffer LT - 2P AH149553, x /2 1/1 33 mm (1-1/8") long $ C-1101 AH130160/ Bottom Sieve ST - 2P - RH AH x /2 1/1 33 mm (1-1/8") short $ C-1101 a AH130160/ Bottom Sieve ST - 2P - LH AH x /3 1/1 33 mm (1-1/8") short $ C-1101 a Bottom Sieve LT - 2P - RH N/A x /2 1/1 33 mm (1-1/8") long $ C-1101 a Bottom Sieve LT - 2P - LH N/A x /3 1/1 33 mm (1-1/8") long $ C-1101 a Effective January 1,

30 Gateway Durable Plastic Sieves and Chaffers OEM Replacement Parts Description OEM Part No. Frame Size Wt. Panels Adjustments Row-to-Row Tooth Gateway 2018 Parts Replc. # / Orig. # Replc. # / Orig. # Part No. List Price Manual John Deere Titan II Top Chaffer 8820 Titan II 45LT - 4P AH x /7 2/2 45 mm (1-5/8") long $1, C-1107 Top Chaffer 8820 Titan II 33ST - 4P AH x /7 2/2 33 mm (1-1/8") short $1, C-1107 Top Chaffer 8820 Titan II 33LT - 4P AH x /7 2/2 33 mm (1-1/8") long $1, C-1107 Bottom Sieve 8820 Titan II 33ST - 4P AH x /6 1/2 33 mm (1-1/8") short $1, C-1104 Bottom Sieve 8820 Titan II 33LT - 4P AH x /6 1/2 33 mm (1-1/8") long $1, C-1104 John Deere Titan II Top Chaffer 7720 Titan II 45LT - 4P AH x /6 2/2 45 mm (1-5/8") long $1, C-1107 Top Chaffer 7720 Titan II 33ST - 4P AH x /6 2/2 33 mm (1-1/8") short $1, C-1107 Top Chaffer 7720 Titan II 33LT - 4P AH x /6 2/2 33 mm (1-1/8") long $1, C-1107 Bottom Sieve 7720 Titan II 33ST - 4P AH x /5 1/1 33 mm (1-1/8") short $1, C-1104 Bottom Sieve 7720 Titan II 33LT - 4P AH x /5 1/1 33 mm (1-1/8") long $1, C-1104 John Deere Titan II Top Chaffer 6620 Titan II 45LT - 3P AH x /5 2/2 45 mm (1-5/8") long $1, C-1103 Top Chaffer 6620 Titan II 33ST - 3P AH x /5 2/2 33 mm (1-1/8") short $1, C-1103 Top Chaffer 6620 Titan II 33LT - 3P AH x /5 2/2 33 mm (1-1/8") long $1, C-1103 Bottom Sieve 6620 Titan II 33ST - 3P AH x /4 1/1 33 mm (1-1/8") short $1, C-1102 Bottom Sieve 6620 Titan II 33LT - 3P AH x /4 1/1 33 mm (1-1/8") long $1, C-1102 John Deere S/N and Prior Top Chaffer LT - 4P AH x /7 2/2 45 mm (1-5/8") long $1, C-1107 Top Chaffer ST - 4P AH x /7 2/2 33 mm (1-1/8") short $1, C-1107 Top Chaffer LT - 4P AH x /7 2/2 33 mm (1-1/8") long $1, C-1107 Bottom Sieve ST - 4P AH x /6 1/2 33 mm (1-1/8") short $1, C-1104 Bottom Sieve LT - 4P AH x /6 1/2 33 mm (1-1/8") long $1, C-1104 John Deere , 7701, 7720, 7721 Prior To S/N Top Chaffer LT - 4P AH x /6 2/2 45 mm (1-5/8") long $1, C-1107 Top Chaffer ST - 4P AH x /6 2/2 33 mm (1-1/8") short $1, C-1107 Top Chaffer LT - 4P AH x /6 2/2 33 mm (1-1/8") long $1, C-1107 Bottom Sieve ST - 4P AH x /5 1/1 33 mm (1-1/8") short $1, C-1104 Bottom Sieve LT - 4P AH x /5 1/1 33 mm (1-1/8") long $1, C-1104 John Deere , 6601, 6620, 6621, 6622 Prior to S/N Top Chaffer LT - 3P AH x /5 2/2 45 mm (1-5/8") long $1, C-1103 Top Chaffer ST - 3P AH x /5 2/2 33 mm (1-1/8") short $1, C-1103 Top Chaffer LT - 3P AH x /5 2/2 33 mm (1-1/8") long $1, C-1103 Bottom Sieve ST - 3P AH x /4 1/1 33 mm (1-1/8") short $1, C-1102 Bottom Sieve LT - 3P AH x /4 1/1 33 mm (1-1/8") long $1, C-1102 Divider Riser Kit - Optional 12 clips, 30 rivets $42.44 C Effective January 1, 2018

31 Gateway Durable Plastic Sieves and Chaffers OEM Replacement Parts Note: If a combine model is not listed, contact HCC, Inc. to determine if we have a Gateway unit that fi ts the combine model requested. Note: Not recommended for rice application. Note: Verify measurements before ordering. Note: Remote adjust is only available on part numbers specifi ed. Note #1 - Must order two chaffers or both LH (left-hand) and RH (right-hand) sieves to replace units. HCC does not recommend running a Gateway side by side with a steel frame. Note #2 - Gateway unit will replace all Case base part numbers, regardless of revision level (ie. C1, C2, etc.). Note #3 - JD S Series Combines on the bottom sieve are 10" longer and we do not carry this sieve in a Gateway. 1 Not all OEM part numbers are shown. Use 45 LT to replace either 1-5/8 chaffers or 1-5/8 deep-tooth chaffers. Contact HCC, inc. with any questions. 2 HCC is now offereing the top chaffer long tooth in a short tooth confi guration for all models indicated. The price for the short tooth will be the same as the price for the long tooth 33 mm (1-1/8 ). Contact HCC, inc. for part number and availability. 3 Divider risers may not line up. Side adjuster may require modifi cation to work with unit. 4 For use in high yielding corn or if combine has hillside dividers installed on the grain pan. 5 For use in small grains. 6 Internal modifi cation to shoe cross brace required due to increased height of Gateway sieve. e Electric Adjustment m Manual Adjustment All Parts Manuals - Installation Guides are found on HCC Website at Gateway Parts are offered -- Call HCC for Pricing and Availablity INSTALLATION GUIDES a) C Installation Instruction JD 900 & 10 Series Extension b) C Installation Insturction Deere STS GW c) C Installation Instruction Case GW d) C Combine Shoe Modifi cation for 9690 & 9790 MF e) C Supplemental GW Instgallation Guide for Case Combines f) C Installation Guide CaseIH, New Holand, CR, CX Machines g) C Installation Guide for CaseIH 88 Series HCC, inc., the maker of virtually all original equipment sieves and chaffers. As a result, fit and function of replacement parts is guaranteed to meet or exceed original equipment standards. Effective January 1,

32 HCC, inc., the maker of virtually all original equipment sieves and chaffers. As a result, fit and function of replacement parts is guaranteed to meet or exceed original equipment standards. Gateway Bulk Parts Price List Pkg P/N QTY Description 2018 List Price Picture Service Pkg - Female Connector (100 Count of ) $ Service Pkg - Male Connector (100 Count of ) $ Service Pkg - Center Connector Long (100 Count of ) $ Service Pkg - Center Connector Short (100 Count of ) $ Service Pkg - RH End Connector (100 Count of ) $ Service Pkg - LH End Connector (100 Count of ) $ Service Pkg - Push Nut (200 Count ) $ Effective January 1, 2018

33 HCC, inc., the maker of virtually all original equipment sieves and chaffers. As a result, fit and function of replacement parts is guaranteed to meet or exceed original equipment standards. Gateway Bulk Parts Price List Continued Pkg P/N QTY Description 2018 List Price Picture Service Pkg - Short Tooth Slat (300 Count of ) $2, Service Pkg - Long Tooth Slat (250 Count of ) $1, Effective January 1,

34 HCC, inc., the maker of virtually all original equipment sieves and chaffers. As a result, fit and function of replacement parts is guaranteed to meet or exceed original equipment standards. Gateway Sieve and Chaffer Service Package Price List Connectors Kit 2018 Part No. Description List Price Service Package - Package Connectors with Adjusting Arm $ of Metal Push Nuts for Crank Arm.250 Stud Diameter 5 of Axle Connectors - Female 5 of Axle Connectors - Male 5 of Center Connectors - Crank Arm - Long Service Package - Package Plastic Connectors without Adjustment Arm $ of Axle Connectors - Female 5 of Axle Connectors - Male 5 of Center Connectors - No Crank Arm - Short Service Package - Package End Connectors - LH and RH $ of RH End Cranks 5 of LH End Cranks GW Slat Kits - 10 Count 2018 Part No. Description List Price Service Package - GW Sieve Short Tooth Slat 28" Long (10 Count of ) ** $ Service Package - GW Chaffer Long Tooth Slat 28" Long (10 Count of ) ** $ Service Package - GW Sieve Short Tooth Slat 24" Long (10 Count of ) ** $ Service Package - GW Sieve Long Tooth Slat 24" Long (10 Count of ) ** $ Service Package - GW Chaffer Flat Slat 28" Long (10 Count of ) ** $ Service Package - GW Sieve Flat Slat 28" Long (10 Count of ) ** $ Note: Left and Right-Hand (LH/RH) is as viewed from the driver s seat. Note: The Crank Arm/Male Axle Connector/Female Axle Connector components should be replaced as an entire assembly to ensure proper fi tting of these mating components. Note: All Service Packages include a instruction manual. ** All slat service packages have enough material length to make 20 slats, except where noted in the description. An existing slat can be used as a template Effective January 1, 2018

35 NOTES Effective January 1,

36 Reels HCC Reels for Combines and Swathers HCC Reels HCC Reels excel in moving crops into the combine. New design concepts effectively divide, lift, and feed standing or down crops, including soybeans, canola, wheat, lentils, irrigated crops, rice, and milo. Dependability and lower maintenance result from fewer parts and tough polymer tines made with exclusive material. HCC Reel users enjoy advantages such as 35-40% improved visibility, up to 25% less weight to decrease load on harvesting equipment, and superior bat strength versus sheetmetal or aluminum. The HCC Reel provides lower cost, more effective crop movement, and less down time for combine and swather customers world-wide. HCC Level II Reel Components The Reel Bundle consists of the center tube and bat tubes with tines attached. The Reel Attaching Packages consists of RH & LH Brackets, Drive Shafts, End Shields, Reel Arms for mounting Bat Tubes to Center Tube, Reel Arm Bearings, and all Hardware for assembly Level II Reels Level II bat tube reels were introduced in center tubes for reels 15 to 30 (are as noted) 10 center tubes for reels (are as noted) ML 5 and ML 6 Bat Reels ML (Metric Length) bat tube reels were introduced in 1990 Real Bundles and Att. Packages are no longer offered. What was offered in a Reel Bundle and Att. Pkg will now only be available as Individual Service Parts, located in the Miscellaneous Service Parts Section. Bat Tubes will NOT be assembled with the Tines. 7-1 Effective January 1, 2018

Index PICK-UP REEL PARTS. Hart Carter ML Reel Bats & Attaching Parts Universal Profiteer Reel Parts... 14

Index PICK-UP REEL PARTS. Hart Carter ML Reel Bats & Attaching Parts Universal Profiteer Reel Parts... 14 Index Hart Carter ML Reel Bats & Attaching Parts... 5 Hart Carter ML Reel Parts 5 bat...4 6 bat...5 Universal Profiteer Reel Parts... 14 Universal Series I Reel Parts... 15 Universal Series II Reel Parts...16-17

More information

Operation and Parts Manual

Operation and Parts Manual Operation and Parts Manual 3-Point PTO and Hydraulic Stump Grinders Models: SC-25 and SC-25H SC-50 and SC-50H Safety Operation Maintenance Repair Troubleshooting Parts Parts SC-50 and SC-50-H Stumpbuster

More information

MODEL I-900 SCRAPER INDEX

MODEL I-900 SCRAPER INDEX I-900 PARTS MANUAL Ashland Industries Inc. Hwy. 13 South P.O. Box 717 Ashland, WI. 54806 877-634-4622 Toll Free - phone 715-682-4622 phone 715-682-9717 fax www.ashlandind.com MODEL I-900 SCRAPER HOW TO

More information

I-110 PARTS MANUAL Updated 3/21/01

I-110 PARTS MANUAL Updated 3/21/01 I-110 PARTS MANUAL Updated 3/21/01 Ashland Industries Inc. Hwy. 13 South P.O. Box 717 Ashland, WI. 54806 877-634-4622 Toll Free - phone 715-682-4622 phone 715-682-9717 fax www.ashlandind.com MODEL I-100,

More information

Model 35 PARTS MANUAL

Model 35 PARTS MANUAL Model 35 PARTS MANUAL Version 3-2007 Ashland Industries Inc. 1115 Rail Drive P.O. Box 717 Ashland, WI. 54806 Ph: 877-634-4622 Toll Free Ph: 715-682-4622 Fx: 715-682-9717 www.ashlandind.com Model 35 Scraper

More information

CORN HEADER MANUAL: CNH PRE-2012

CORN HEADER MANUAL: CNH PRE-2012 CORN HEADER MANUAL: CNH PRE-2012 09020201c HEADSIGHT.COM 574.546.5022 About Headsight Headsight Contact Info Headsight, Inc. 4845 3B Road Bremen, IN 46506 Phone: 574-546-5022 Fax: 574-546-5760 Email:

More information

See Thru Pipe Reel Conversion Kits

See Thru Pipe Reel Conversion Kits See Thru Pipe Reel Conversion Kits *Strongest Reel Available *Fingers use the patented Gentle Finger design. *Fingers are guaranteed one year against breakage. *Replaces Wood Bat Reels, Tear Drop Reels,

More information

I-130 XL PARTS MANUAL Introduced 4/01/01

I-130 XL PARTS MANUAL Introduced 4/01/01 I-130 XL PARTS MANUAL Introduced 4/01/01 Ashland Industries Inc. Hwy. 13 South P.O. Box 717 Ashland, WI. 54806 877-634-4622 Toll Free - phone 715-682-4622 phone 715-682-9717 fax www.ashlandind.com MODEL

More information

DRAGO. Corn Header Manual f HEADSIGHT.COM

DRAGO. Corn Header Manual f HEADSIGHT.COM DRAGO Corn Header Manual 09020801f HEADSIGHT.COM 574.546.5022 About Headsight Headsight Contact Info Headsight, Inc. 4845 3B Road Bremen, IN 46506 Phone: 574-546-5022 Fax: 574-546-5760 Email: info@headsight.com

More information

AGCO Conversion Manual a HEADSIGHT.COM

AGCO Conversion Manual a HEADSIGHT.COM AGCO 3300 Conversion Manual 09040404a HEADSIGHT.COM 574.546.5022 About Headsight Headsight Contact Info Headsight, Inc. 4845 3B Road Bremen, IN 46506 Phone: 574-546-5022 Fax: 574-546-5760 Email: info@headsight.com

More information

AGCO. Corn Header Manual d HEADSIGHT.COM

AGCO. Corn Header Manual d HEADSIGHT.COM AGCO Corn Header Manual 09020401d HEADSIGHT.COM 574.546.5022 About Headsight Headsight Contact Info Headsight, Inc. 4845 3B Road Bremen, IN 46506 Phone: 574-546-5022 Fax: 574-546-5760 Email: info@headsight.com

More information

JD 900F TILT SENSOR INSTALLATION

JD 900F TILT SENSOR INSTALLATION JD 900F TILT SENSOR INSTALLATION Conversion Manual 09040108b HEADSIGHT.COM 574.546.5022 About Headsight Headsight Contact Info Headsight, Inc. 4845 3B Road Bremen, IN 46506 Phone: 574-546-5022 Fax: 574-546-5760

More information

HPx-JDx3-xx HARNESS INSTALLATION

HPx-JDx3-xx HARNESS INSTALLATION HPx-JDx3-xx HARNESS INSTALLATION Conversion Manual 09040106b HEADSIGHT.COM 574.546.5022 About Headsight Headsight Contact Info Headsight, Inc. 4845 3B Road Bremen, IN 46506 Phone: 574-546-5022 Fax: 574-546-5760

More information

GERINGHOFF. Corn Header Manual f HEADSIGHT.COM

GERINGHOFF. Corn Header Manual f HEADSIGHT.COM GERINGHOFF Corn Header Manual 09020701f HEADSIGHT.COM 574.546.5022 About Headsight Headsight Contact Info Headsight, Inc. 4845 3B Road Bremen, IN 46506 Phone: 574-546-5022 Fax: 574-546-5760 Email: info@headsight.com

More information

JOHN DEERE 9970 COTTON PICKERS

JOHN DEERE 9970 COTTON PICKERS PARTS CATALOG FOR Mud Hog System II Rear Wheel Drive FOR JOHN DEERE 9970 COTTON PICKERS Mud Hog Model Numbers Tread Center OEM Aftermarket JD40005 JD47655 82, 90, 94, 106 TUTHILL Drive Systems 9098 West

More information

SCHMEISER BANTAM LEVELER ASSEMBLY & PARTS MANUAL T. G. SCHMEISER CO., INC.

SCHMEISER BANTAM LEVELER ASSEMBLY & PARTS MANUAL T. G. SCHMEISER CO., INC. SCHMEISER BANTAM LEVELER ASSEMBLY & PARTS MANUAL T. G. SCHMEISER CO., INC. P.O. BOX 07 FRESNO, CA 937-07 (559) 68-88 FAX (559) 68-379 www.tgschmeiser.com VERSION.3 OCTOBER 03 COPY RIGHT 03 T.G.SCHMEISER

More information

PARTS CATALOG FOR. Mud Hog Rear Wheel Drive FOR. MF 9540/9550/9560, CAT 540C/550C/560C, Gleaner A540/A560, Fendt 6450R/9480R COMBINES

PARTS CATALOG FOR. Mud Hog Rear Wheel Drive FOR. MF 9540/9550/9560, CAT 540C/550C/560C, Gleaner A540/A560, Fendt 6450R/9480R COMBINES PARTS CATALOG FOR Mud Hog Rear Wheel Drive FOR MF 9540/9550/9560, CAT 540C/550C/560C, Gleaner A540/A560, Fendt 6450R/9480R COMBINES Mud Hog Model Number: AG9896 A Product of Tuthill Drive Systems P.O.

More information

SHEYENNE TELE-BOOM OWNERS MANUAL OPERATOR INSTRUCTIONS PARTS BOOK

SHEYENNE TELE-BOOM OWNERS MANUAL OPERATOR INSTRUCTIONS PARTS BOOK SHEYENNE TELE-BOOM OWNERS MANUAL OPERATOR INSTRUCTIONS PARTS BOOK 701 Lenham Ave. SW PO Box 647 Cooperstown ND 58425 1-800-797-1883 701-797-2700 * 701-797-2584 Fax www.sheyennemfg.com TABLE OF CONTENTS

More information

ECONOMY SPRAYERS GC SERIES

ECONOMY SPRAYERS GC SERIES ECONOMY SPRAYERS GC SERIES Parts Manual For Models: GC0 & GC600 Form: GCSeriesSprayersRev3.indd Rev. September 2014 TABLE OF CONTENTS SECTION DESCRIPTION... PAGE 1 Introduction... 1 1.1 Purchaser s Responsibility...

More information

I-175 PARTS MANUAL Version 4-04

I-175 PARTS MANUAL Version 4-04 I-175 PARTS MANUAL Version 4-04 Ashland Industries Inc. 1115 Rail Drive P.O. Box 717 Ashland, WI. 54806 Ph: 877-634-4622 Toll Free Ph: 715-682-4622 Fx: 715-682-9717 www.ashlandind.com Model I-175 Scraper

More information

FIELD TRACKER for CASEIH Combines

FIELD TRACKER for CASEIH Combines FIELD TRACKER for CASEIH Combines Product Description and Application Field Tracker for CASEIH Combines Product Description and Application Summary Price List CASEIH Description List Note Page Part No.

More information

MFG. CO. INC. DODGE CITY, KANSAS (620) Electric Truck Auger. Owners Manual

MFG. CO. INC. DODGE CITY, KANSAS (620) Electric Truck Auger. Owners Manual MFG. CO. INC. DODGE CITY, KANSAS 67801 (620) 225-0263 4 Electric Truck Auger Owners Manual Sept. 2005 The Farm And Industrial Equipment Institute Safety Alert Symbol BE ALERT! Your Safety is Involved Be

More information

Model 873 COMBINE ADAPTER

Model 873 COMBINE ADAPTER Model 873 COMBINE ADAPTER For 963, 972, 973 & 974 Headers on: Case Combines New Holland Combines John Deere Combines Lexion Combines Agco Combines PARTS CATALOG Form 147071 Issue 09/06 Sugg. Retail: $10.00

More information

DRAPER SPEED FOR 600FD

DRAPER SPEED FOR 600FD DRAPER SPEED FOR 600FD Conversion Manual 09040117d HEADSIGHT.COM 574.546.5022 About Headsight Headsight Contact Info Headsight, Inc. 4845 3B Road Bremen, IN 46506 Phone: 574-546-5022 Fax: 574-546-5760

More information

JD Flex. Header Manual c

JD Flex. Header Manual c JD Flex Header Manual 09030101c About Headsight Headsight Contact Info Headsight, Inc 3529 Fir Road Bremen, IN 46506 Phone: 574-546-5022 Fax: 574-546-5760 Email: info@headsight.com Web: www.headsight.com

More information

S-Series Combine and Front End Equipment Optimization

S-Series Combine and Front End Equipment Optimization S-Series Combine and Front End Equipment Optimization Ready To Harvest for Canola John Deere Harvester Works 0 Contents Preface..2 S-Series Combine Field Installed Bundles.... 3 Header Field installed

More information

OWNER S MANUAL. Model 474. Hay Indicator Kit 474 INST & OPR 1/16

OWNER S MANUAL. Model 474. Hay Indicator Kit 474 INST & OPR 1/16 OWNER S MANUAL Model 474 Hay Indicator Kit 474 INST & OPR 1/16 1 TABLE OF CONTENTS PAGE Overview 3 Tools Needed 3 Mounting Instructions for Hay Indicator on Baler 4-9 Alignment of the Sensors 4 Installation

More information

LEXION SINGLE FUNCTION HYDRAULIC VALVE KIT

LEXION SINGLE FUNCTION HYDRAULIC VALVE KIT LEXION SINGLE FUNCTION HYDRAULIC VALVE KIT Conversion Manual 09062010b HEADSIGHT.COM 574.546.5022 About Headsight Headsight Contact Info Headsight, Inc. 4845 3B Road Bremen, IN 46506 Phone: 574-546-5022

More information

Installation Manual. Model 300SS-M. Moisture Only Kit for Small Square Balers 300SS-16-INST-M 3/17 1

Installation Manual. Model 300SS-M. Moisture Only Kit for Small Square Balers 300SS-16-INST-M 3/17 1 Installation Manual Model 300SS-M Moisture Only Kit for Small Square Balers 300SS-16-INST-M 3/17 1 (intentionally blank) 2 300SS Installation Manual Table of Contents Page Introduction 4 System Requirements

More information

Sickles - Split, without drive head - Can ship UPS

Sickles - Split, without drive head - Can ship UPS Combine Sickle Repairs (OEM Style) - Agco Series 2-8 & Challenger Sections and Section Bolts K412051 BDC6700B Single point section, Kondex no. 432-051 extra heavy, chrome, top serrated section. Fits 300,

More information

PARTS CATALOG FOR. Mud Hog System II & System III 2-Speed Rear Wheel Drive FOR JOHN DEERE 9960, 9965 & 9970 COTTON PICKERS

PARTS CATALOG FOR. Mud Hog System II & System III 2-Speed Rear Wheel Drive FOR JOHN DEERE 9960, 9965 & 9970 COTTON PICKERS PARTS CATALOG FOR Mud Hog System II & System III 2-Speed Rear Wheel Drive FOR JOHN DEERE 9960, 9965 & 9970 COTTON PICKERS Mud Hog Model Numbers Tread Center MH System 9960 9965 & 9970 JD47601 JD47651 82-90

More information

ECONOMY SPRAYERS GC SERIES

ECONOMY SPRAYERS GC SERIES ECONOMY SPRAYERS GC SERIES Parts Manual For Models: GC400 & GC600 Form: GCSeriesSprayers.indd October 2011 TABLE OF CONTENTS SECTION DESCRIPTION... PAGE 1 Introduction... 1 1.1 Purchaser s Responsibility...

More information

AllCropHarvester.com. New/New Old Stock List as of 03/04/2016

AllCropHarvester.com. New/New Old Stock List as of 03/04/2016 AllCropHarvester.com New/New Old Stock List as of 03/04/2016 If your part is not listed, please contact us. We may be able to get it, and/or have it as a used part. Contact us for prices not listed/used.

More information

GRAIN platform KITS. grain platform kits & 2020 Header adapter kits. 4 harvesting product support

GRAIN platform KITS. grain platform kits & 2020 Header adapter kits. 4 harvesting product support GRAIN platform KITS GRAIN HEADER COMPLETING KITS 2010 & 2020 Header adapter kits Application: 2100/2300 Series Combines conversion kits Includes: Weldment and mounting hardware for header frame only 87362290:

More information

TRUESENSE JOHN DEERE ROWSENSE

TRUESENSE JOHN DEERE ROWSENSE TRUESENSE JOHN DEERE ROWSENSE Truesense Manual 09050104g HEADSIGHT.COM 574.546.5022 About Headsight Headsight Contact Info Headsight, Inc. 4845 3B Road Bremen, IN 46506 Phone: 574-546-5022 Fax: 574-546-5760

More information

SCHMEISER TILL AN PAK HYDRAULIC TRANSPORT KITS ASSEMBLY & PARTS MANUAL

SCHMEISER TILL AN PAK HYDRAULIC TRANSPORT KITS ASSEMBLY & PARTS MANUAL SCHMEISER TILL AN PAK HYDRAULIC TRANSPORT KITS ASSEMBLY & PARTS MANUAL T.G. SCHMEISER CO., INC. P.O. BOX 07 FRESNO, CA. 97 (559) - FAX (559) -79 www.tgschmeiser.com VERSION.a 0-0 COPYRIGHT 0 T.G.SCHMEISER

More information

TABLE OF CONTENTS. Warranty Disclaimers Delivery Checklist After Sale Checklist Safety Set Up... 8

TABLE OF CONTENTS. Warranty Disclaimers Delivery Checklist After Sale Checklist Safety Set Up... 8 TABLE OF CONTENTS Pickett Equipment Warranty... 2 Warranty Disclaimers... 3 Delivery Checklist... 4 After Sale Checklist... 4 Safety... 5-7 Set Up... 8 Machine Adjustments and Operation... 9 Maintenance

More information

FOLD CONTROL FOR 600FC

FOLD CONTROL FOR 600FC FOLD CONTROL FOR 600FC Conversion Manual 09040122b HEADSIGHT.COM 574.546.5022 About Headsight Headsight Contact Info Headsight, Inc. 4845 3B Road Bremen, IN 46506 Phone: 574-546-5022 Fax: 574-546-5760

More information

2015 & 2018 Fender Brace Installation Instructions

2015 & 2018 Fender Brace Installation Instructions 2015 & 2018 Fender Brace Installation Instructions Thank you for your purchase of this Hotchkis Performance product. Your Fender Brace set was designed with the performance and durability you ve come to

More information

22427 SWAY BAR SET 2002-UP SUBARU WRX WAGON

22427 SWAY BAR SET 2002-UP SUBARU WRX WAGON 22427 SWAY BAR SET 2002-UP SUBARU WRX WAGON Thank you for your purchase from our line of Subaru WRX parts. Please call us at (877) 4NO-ROLL if you have any questions regarding the service or installation

More information

Tubular Lower A-Arms GM A-Body Tubular Lower A-Arms GM F-Body

Tubular Lower A-Arms GM A-Body Tubular Lower A-Arms GM F-Body 1104 - Tubular Lower A-Arms 64-72 GM A-Body 1108 - Tubular Lower A-Arms 70-81 GM F-Body Tubular Lower A-Arms: Thank you for your purchase from our new line of A-Body parts. Please call us at (877) 4NO

More information

Installation Manual. Model 664. Automatic Preservative Applicator INST 5/14

Installation Manual. Model 664. Automatic Preservative Applicator INST 5/14 Installation Manual Model 664 Automatic Preservative Applicator 010-0664-INST 5/14 (intentionally blank) 2 Harvest Tec Model 664 Installation Table of Contents PAGE Introduction 4 System Requirements 4

More information

SHEYENNE TELE-SAW MODEL 21 OWNERS MANUAL OPERATOR INSTRUCTIONS PARTS BOOK

SHEYENNE TELE-SAW MODEL 21 OWNERS MANUAL OPERATOR INSTRUCTIONS PARTS BOOK SHEYENNE TELE-SAW MODEL 21 OWNERS MANUAL OPERATOR INSTRUCTIONS PARTS BOOK 701 Lenham Ave. - P.O. Box 647 Cooperstown, ND 58425 Office (701) 797-2700 Fax (701) 797-2584 Toll Free (800) 797-1883 www.sheyennemfg.com

More information

Rear Weight Kit M060

Rear Weight Kit M060 Operator s Manual Rear Weight Kit 490-900-M060 WARNING READ AND FOLLOW ALL SAFETY RULES AND INSTRUCTIONS IN THIS MANUAL BEFORE ATTEMPTING TO OPERATE THIS MACHINE. FAILURE TO COMPLY WITH THESE INSTRUCTIONS

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS 1301 / 1302 / 1305 / 1306 THANK YOU FOR CHOOSING HOTCHKIS PERFORMANCE PRODUCTS Removal of Stock Lower Trailing Arms 1) Place car on level surface. 2) Support rear of the car on

More information

USER S OPERATING AND INSTRUCTION MANUAL

USER S OPERATING AND INSTRUCTION MANUAL Grand Rapids, Michigan, U.S.A. 49504-5298 USER S OPERATING AND INSTRUCTION MANUAL MODEL 797-21 BREAD SLICER 797S20000CV_21 THIS PAGE WAS INTENTIONALLY LEFT BLANK. GEN020319 RECOMMENDED

More information

Model 960 Double Delivery and Triple Delivery HARVEST HEADERS PARTS CATALOG

Model 960 Double Delivery and Triple Delivery HARVEST HEADERS PARTS CATALOG Model 960 Double Delivery and Triple Delivery HARVEST HEADERS PARTS CATALOG with Adapters for: Model 7000 Self-Propelled Windrower Model 9000 Self-Propelled Windrower John Deere 7720, 8820, 9500, 9600

More information

Model 872 COMBINE ADAPTER PARTS CATALOG

Model 872 COMBINE ADAPTER PARTS CATALOG Model 872 COMBINE ADAPTER PARTS CATALOG 1 CONTENTS Frame and Float Group... 2-5 Hydraulics... 6 9 Gear Drive... 10, 11 Feed Draper & Deck... 12-15 Retracting Tine Drum... 16, 17 John Deere Combines Adapter

More information

*These high quality chains have solid rollers and solid pins.

*These high quality chains have solid rollers and solid pins. Cornhead Parts *These high quality chains have solid rollers and solid pins. Agco-Gleaner & Challenger Cornhead Parts ADA100 ADA400 ADA500 Gathering chain, fits 2A, 3E, C240, older heads 62A-53-C7-8. Replaces

More information

P/N# Performance Lowering Springs Installation Instructions

P/N# Performance Lowering Springs Installation Instructions P/N# 19110 Performance Lowering Springs Installation Instructions Thank you for your purchase of this Hotchkis Performance product. Your Lowering Spring set was designed with the performance and durability

More information

16366 Steering Tie Rods Chrysler B-Body, Charger, Super Bee, Road Runner, GTX Chrysler E-Body, Cuda, Challenger

16366 Steering Tie Rods Chrysler B-Body, Charger, Super Bee, Road Runner, GTX Chrysler E-Body, Cuda, Challenger P 16366 66-70 B-Body, 70-74 E-Body 16366 Steering Tie Rods 1966-1970 Chrysler B-Body, Charger, Super Bee, Road Runner, GTX 1970-1974 Chrysler E-Body, Cuda, Challenger Thank you for your purchase from our

More information

Heavy Duty Front-Drive Steer Axles MX-140 and MX-160 Series

Heavy Duty Front-Drive Steer Axles MX-140 and MX-160 Series Revised 11/2009 Heavy Duty Front-Drive Steer Axles MX-140 and MX-160 Series Catalog PB-0349 Strength Power Speed Agility MERITOR PARTS. RIGHT FROM THE START. TABLE OF CONTENTS MX-17/19/21-140 and MX-21/23-160

More information

PARTS BOOKS INSTRUCTIONS

PARTS BOOKS INSTRUCTIONS PARTS BOOKS INSTRUCTIONS To Use DRACO Equipment Parts Books Follow the instructions listed below: From The Main Index Page: Click on the PARTS TAB on the top of the page: Open parts books for your particular

More information

SPORT COIL SPRINGS Scion xa & xb Part #19412 INSTALLATION OF HOTCHKIS FRONT COIL SPRINGS

SPORT COIL SPRINGS Scion xa & xb Part #19412 INSTALLATION OF HOTCHKIS FRONT COIL SPRINGS SPORT COIL SPRINGS 2004+ Scion xa & xb Part #19412 Thank you for your purchase from our new line of Scion xa / xb parts. Please call us at (877) 4NO-ROLL if you have any questions regarding the service

More information

UPPER TRAILING ARM REMOVAL

UPPER TRAILING ARM REMOVAL #1204 MUSTANG UPPER TRAILING ARMS Thank you for your purchase. Please call us at (562) 907-7757 if you have any questions regarding your Hotchkis Performance products. Visit us online @ www.hotchkis.net

More information

1109 Tubular Lower A-Arms Camaro/Firebird

1109 Tubular Lower A-Arms Camaro/Firebird 1109 Tubular Lower A-Arms 67-69 Camaro/Firebird Tubular Lower A-Arms: Thank you for your purchase from our new line of F-Body parts. Please call us at (877) 4NO - ROLL if you have any questions regarding

More information

Draper Platform Adaptation Bundle

Draper Platform Adaptation Bundle Draper Platform Adaptation Bundle 7050-Series Self-Propelled Forage Harvester 900D-Series Draper Platform RC042050 Operator s Manual Includes installation, operating, adjustment, technical, repair parts

More information

TRACKS BUILT TO LAST. AGRICULTURAL MADE FOR AGRICULTURE. PROVEN TO PERFORM. FOR HIGH-HORSEPOWER TRACTORS

TRACKS BUILT TO LAST. AGRICULTURAL MADE FOR AGRICULTURE. PROVEN TO PERFORM. FOR HIGH-HORSEPOWER TRACTORS AGRICULTURAL TRACKS MADE FOR AGRICULTURE. PROVEN TO PERFORM. BUILT TO LAST. When it comes to tracks for agriculture, we understand the need for strength and durability. Our commitment to quality is steadfast.

More information

2000SR. Installation Instructions May Donovan Enterprises 3353 S.E. Gran Park Way Stuart, Florida

2000SR. Installation Instructions May Donovan Enterprises 3353 S.E. Gran Park Way Stuart, Florida 311499-Donovan 4/28/04 11:22 PM Page 1 Installation Instructions May 2003 Donovan Enterprises 3353 S.E. Gran Park Way Stuart, Florida 34997 1-800-327-8287 Visit our web site at: www.donovan-ent.com 311499-Donovan

More information

14366, Adjustable Strut Rods Chrysler A-Body Chrysler B-Body Chrysler E-Body

14366, Adjustable Strut Rods Chrysler A-Body Chrysler B-Body Chrysler E-Body 14366, 14385 Adjustable Strut Rods 67-76 Chrysler A-Body 1966-1970 Chrysler B-Body 1970-1974 Chrysler E-Body Thank you for your purchase from our new line of B & E-Body parts. Please call us at (877) 4NO

More information

Rear Suspension System C-10 Pickup Truck

Rear Suspension System C-10 Pickup Truck Rear Suspension System 18390 67-72 C-10 Pickup Truck Thank you for your purchase from our new line of Chevy parts. Please call us at 877-4NO - ROLL if you have any questions regarding the service or installation

More information

Rear Weight Kit 19A , OEM-19A-218 & M060

Rear Weight Kit 19A , OEM-19A-218 & M060 Operator s Manual Rear Weight Kit 19A-218-000, OEM-19A-218 & 490-900M060 WARNING READ AND FOLLOW ALL SAFETY RULES AND INSTRUCTIONS IN THIS MANUAL BEFORE ATTEMPTING TO OPERATE THIS MACHINE. FAILURE TO COMPLY

More information

900 SERIES SPLIT CASE FIRE PUMP REPAIR PARTS INDEX

900 SERIES SPLIT CASE FIRE PUMP REPAIR PARTS INDEX 900 SERIES SPLIT CASE FIRE PUMP REPAIR PARTS INDEX Read and understand the pump and motor instructions before attempting to install, disassemble or repair the pump. Part # AF-03-326 2015 Pentair Ltd. 01/30/15

More information

2236 Sway Bar Installation Instructions

2236 Sway Bar Installation Instructions 2236 Sway Bar Installation Instructions Thank you for your purchase of this Hotchkis Performance product. Your stabilizer bar set was designed with the performance and durability you ve come to expect

More information

MOVE ON TO THE REAR BAR INSTALLATION

MOVE ON TO THE REAR BAR INSTALLATION 22410 STREET SWAY BAR SET 2001-UP LEXUS IS300 Thank you for your purchase from our line of Lexus parts. Please call us at (877) 4NO-ROLL if you have any questions regarding the service or installation

More information

Installation Instructions

Installation Instructions Safe Operation Practices Set-Up Operation Maintenance Service Troubleshooting Warranty Installation Instructions RZT & Z-Force Light Kit Model 19B70032100 WARNING READ AND FOLLOW ALL SAFETY RULES AND INSTRUCTIONS

More information

PIVOT BUSHING KIT GM F-BODY

PIVOT BUSHING KIT GM F-BODY PIVOT BUSHING KIT 21016 67-69 GM F-BODY 67-69 GM F-Body Pivot Bushing Kit Thank you for your purchase. Please call us at 877-4NO - ROLL if you have any questions regarding the service or installation of

More information

FLAIL MOWER SHREDDER

FLAIL MOWER SHREDDER FLAIL MOWER SHREDDER Operation, Service, & Parts Manual For Models: GML41, 49, 61, 69, & 79 February 2006 FORM: GMLMower.QXD TABLE OF CONTENTS Installation....................................................1

More information

Warranty Information Operators Manual Installation Instructions. Sudenga

Warranty Information Operators Manual Installation Instructions. Sudenga Warranty Information Operators Manual Installation Instructions Sudenga Rust Sales, Inc. 2964 164 th Ave SE Harwood, ND 58042 (800) 478-7801 (701) 282-9194 www.hopperwalker.com Limited Warranty Statement

More information

22421 SPORT SWAY BAR SET TOYOTA COROLLA

22421 SPORT SWAY BAR SET TOYOTA COROLLA 22421 SPORT SWAY BAR SET 98-01 TOYOTA COROLLA Thank you for your purchase from our line of Corolla parts. Please call us at (877) 4NO-ROLL if you have any questions regarding the service or installation

More information

XB IMPLEMENTS PARTS MANUAL

XB IMPLEMENTS PARTS MANUAL XB IMPLEMENTS PARTS MANUAL Parts Manual For: MIDDLE BUSTER/SUB SOILER - MB-S-XB CARRY ALL - CA-XB DIRT SCOOP - DS-24-XB YARD RAKE - TYR-60-XB REAR BLADE - TRB-60-XB BOX BLADE - BB-48-XB August 2011 Form:

More information

S.I. Distributing Inc.

S.I. Distributing Inc. S.I. Distributing Inc. Successful Innovations for Agriculture Since 1979 White 9000 Series Keeton Installation When installing the Keeton Universal Bracket on a White 9000 Series Planter, please use the

More information

GRADER BLADE ASSEMBLY & PARTS MANUAL

GRADER BLADE ASSEMBLY & PARTS MANUAL SCHMEISER GRADER BLADE ASSEMBLY & PARTS MANUAL UP TO 0 FT. WIDE T. G. SCHMEISER CO., INC. P.O. BOX 07 FRESNO, CA 937-07 (9) - FAX (9) -379 VERSION. 0 03 COPYRIGHT 03 T.G.SCHMEISER CO., INC INTRODUCTION

More information

P/N# Performance Lowering Springs Installation Instructions

P/N# Performance Lowering Springs Installation Instructions P/N# 19391 Performance Lowering Springs Installation Instructions Thank you for your purchase of this Hotchkis Performance product. Your Lowering Spring set was designed with the performance and durability

More information

Sport Coil Springs Dodge Magnum, Chrysler 300C Dodge Challenger SRT Dodge Challenger R/T

Sport Coil Springs Dodge Magnum, Chrysler 300C Dodge Challenger SRT Dodge Challenger R/T Sport Coil Springs 19101 - Dodge Magnum, Chrysler 300C 19107 - Dodge Challenger SRT-8 19108 - Dodge Challenger R/T Thank you for your purchase from our new line of Magnum/300C parts. Please call us at

More information

I-150-SP PARTS MANUAL

I-150-SP PARTS MANUAL Quality Equipment since 1953 I-150-SP PARTS MANUAL Revised 9/22/00 Ashland Industries Inc. Hwy. 13 South P.O. Box 717 Ashland, WI. 54806 877-634-4622 Toll Free - phone 715-682-4622 phone 715-682-9717 fax

More information

Anti-roll bar set Chrysler Magnum, Charger, 300C, SRT Dodge Challenger

Anti-roll bar set Chrysler Magnum, Charger, 300C, SRT Dodge Challenger Anti-roll bar set 22101 Chrysler Magnum, Charger, 300C, SRT-8 22107 Dodge Challenger Thank you for your purchase from our new line of Chrysler parts. Please call us at (877) 4NO-ROLL if you have any questions

More information

Twin Rear Bagger Kit For Lawn Tractors with 38 & 42 Decks

Twin Rear Bagger Kit For Lawn Tractors with 38 & 42 Decks To The Owner Carton Contents Parts Lists Warranty OPERATOR S MANUAL Twin Rear Bagger Kit For Lawn Tractors with 38 & 42 Decks Model 190-180 IMPORTANT READ SAFETY RULES AND INSTRUCTIONS CAREFULLY BEFORE

More information

Sport Sway Bar Kit (22431 ) Subaru Forester INSTALLATION OF HOTCHKIS FRONT SWAY BAR

Sport Sway Bar Kit (22431 ) Subaru Forester INSTALLATION OF HOTCHKIS FRONT SWAY BAR Sport Sway Bar Kit (22431 ) Subaru Forester Thank you for your purchase from our new line of Forester parts. Please call us at (877) 4NO - ROLL if you have any questions regarding the service or installation

More information

REPAIR PART'S MANUAL. MODEL NO. WEFX550E 5 HP 24 Inch Tiller TR PRINTED IN U.S.A.

REPAIR PART'S MANUAL. MODEL NO. WEFX550E 5 HP 24 Inch Tiller TR PRINTED IN U.S.A. REPAIR PART'S MANUAL MODEL NO. WEFX550E 5 HP 24 Inch Tiller 172774 12.14.99 TR PRINTED IN U.S.A. HANDLE ASSEMBLY 1 127046X550 Bracket, Handle 2 72140512 Bolt, Carriage 5/16-18 UNC x 1-1 2 3 9266R Grip,

More information

16385 Steering Tie Rods Chrysler A-Body

16385 Steering Tie Rods Chrysler A-Body 16385 Steering Tie Rods 1967-76 Chrysler A-Body Before You Start: Thank you for your purchase from our new line of B & E-Body parts. Please call us at (877) 4NO - ROLL if you have any questions regarding

More information

For New Holland CR 920/940/960/970/980/9040/9060/9080 CX 720/740/760/780/820/840/860/880/8030/8040/8050/8060/8070/8080/8090

For New Holland CR 920/940/960/970/980/9040/9060/9080 CX 720/740/760/780/820/840/860/880/8030/8040/8050/8060/8070/8080/8090 PARTS CATALOG MUD HOG REAR WHEEL DRIVE For New Holland CR 920/940/960/970/980/9040/9060/9080 CX 720/740/760/780/820/840/860/880/8030/8040/8050/8060/8070/8080/8090 TUTHILL DRIVE SYSTEMS MODEL NUMBERS: CNH4005

More information

2006 SHOCK TOWER BRACE 93-UP F-BODY CAMARO/FIREBIRD

2006 SHOCK TOWER BRACE 93-UP F-BODY CAMARO/FIREBIRD 2006 SHOCK TOWER BRACE 93-UP F-BODY CAMARO/FIREBIRD Thank you for your purchase of this Hotchkis Performance product. Please call us at (800) 4NO-ROLL if you have any questions regarding this product.

More information

Quality Aftermarket Parts for Lift Equipment Now Order Parts Online pcaerialparts.com

Quality Aftermarket Parts for Lift Equipment Now Order Parts Online pcaerialparts.com Quality Aftermarket Parts for Lift Equipment Now Order Parts Online TERMS & CONDITIONS Prices and Payment Terms: Please note prices and terms are subject to change without notice. TABLE OF CONTENTS...

More information

Sport Sway Bar Kit C-10 Truck

Sport Sway Bar Kit C-10 Truck Sport Sway Bar Kit 22390 67-72 C-10 Truck Thank you for your purchase from our new line of Chevy parts. Please call us at 877-4NO - ROLL if you have any questions regarding the service or installation

More information

Westfield, Mayrath, Hutchinson, Wheatheart

Westfield, Mayrath, Hutchinson, Wheatheart Warranty Information Operators Manual Installation Instructions Westfield, Mayrath, Hutchinson, Wheatheart Rust Sales, Inc. 2964 164 th Ave SE Harwood, ND 58042 (800) 478-7801 (701) 282-9194 www.hopperwalker.com

More information

Raydot LLC 24 Actuator (115 VOLT)

Raydot LLC 24 Actuator (115 VOLT) Installation, Operation & Parts Manual Read carefully the information provided. Retain manual for future reference. Raydot LLC 24 Actuator (115 VOLT) 145 Jackson Ave. S. Cokato, MN 55321-USA (320) 286-2103

More information

IMPORTANT NOTICE Stock Height OEM Spindle

IMPORTANT NOTICE Stock Height OEM Spindle IMPORTANT NOTICE Ball Joint Info: Before you install this product, please verify which front spindles you have. We have designed the upper a arms to utilize the 73 87 style spindles. This type of spindle

More information

GM 2500,3500 Nerf Bar Installation Instructions

GM 2500,3500 Nerf Bar Installation Instructions GM 2500,3500 Nerf Bar Installation Instructions Part # 100-7023-00 Fitment: 07-17 GM 2500/3500 Crew Cab 1) Remove Battle Armor nerf bar and hardware from box. Hardware supplied is shown below. Contains

More information

1204AA Ford Mustang Double Adjustable Trailing Arms

1204AA Ford Mustang Double Adjustable Trailing Arms 1204AA 79-04 Ford Mustang Double Adjustable Trailing Arms Thank you for your purchase from our new line of Ford parts. Please call us at (877) 4NO-ROLL if you have any questions regarding the service or

More information

MANUAL NO CREATED: 08/08/2012 MMH REV A STEEL COMPANY R 65 BUSHEL MINI-BIN PARTS AND ASSEMBLY MANUAL

MANUAL NO CREATED: 08/08/2012 MMH REV A STEEL COMPANY R 65 BUSHEL MINI-BIN PARTS AND ASSEMBLY MANUAL MANUAL NO. 195988 CREATED: 08/08/2012 MMH REV A STEEL COMPANY R 65 BUSHEL MINI-BIN PARTS AND ASSEMBLY MANUAL TABLE OF CONTENTS SAFETY AND STATEMENTS OF IMPORTANCE... 2 GENERAL INFORMATION... 3 ASSEMBLY

More information

OPERATORS MANUAL SAFETY & WARRANTY SECTION

OPERATORS MANUAL SAFETY & WARRANTY SECTION OPERATORS MANUAL SAFETY & WARRANTY SECTION KMW Ltd. 198 N. Hwy 281 Great Bend, Kansas 67530 800 445-7388 Fax 620 793-6737 ïïïkâãïäç~çéêëkåçã SAFETY FIRST This symbol, the industry s Safety Alert Symbol,

More information

1107 Tubular Upper A-Arms Camaro/Firebird

1107 Tubular Upper A-Arms Camaro/Firebird 1107 Tubular Upper A-Arms 67-69 Camaro/Firebird Thank you for your purchase from our new line of F-Body parts. Please call us at (877) 4NO - ROLL if you have any questions regarding the service or installation

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS Thank you for purchasing ROXTERTM Hitch Mounted Mud Flaps. Agri-Cover, Inc. proudly manufactured these mud flaps using superior quality materials and workmanship. With proper

More information

Sport Sway Bar Kit Chevy Camaro

Sport Sway Bar Kit Chevy Camaro Sport Sway Bar Kit 22109 2010 Chevy Camaro Thank you for your purchase from our new line of Chevy parts. Please call us at 877-4NO - ROLL if you have any questions regarding the service or installation

More information

Product List HARVEST SERVICES

Product List HARVEST SERVICES Product List HARVEST SERVICES A DIVISION OF RALPH MCKAY INDUSTRIES INC. Phone: (306) 734-2601 Fax: (306) 734-2266 sales@harvestservices.ca www.harvestservices.ca John Deere HARVEST Feeder Chains & Accessories

More information

Drive Sprocket, 10 tooth, heat treated Case-IH Series. Replaces Case-IH no C1.

Drive Sprocket, 10 tooth, heat treated Case-IH Series. Replaces Case-IH no C1. Cornhead Parts *These high quality chains have solid rollers and solid pins. Agco-Gleaner & Challenger Cornhead Parts ADA400 ADA500 Gathering chain, fits 77 to 89 black head adjustable models. Comes with

More information

Sport Sway Bar Kit C-10 Truck

Sport Sway Bar Kit C-10 Truck Sport Sway Bar Kit 22108 67-72 C-10 Truck Thank you for your purchase from our new line of Chevy parts. Please call us at 877-4NO - ROLL if you have any questions regarding the service or installation

More information

INSTRUCTIONS TUBULAR CONTROL ARMS & COIL-OVER CONVERSION FOR AMC MUSCLE CARS: 1970 AMX JAVELIN SPIRIT, HORNET, GREMLIN, CONCORD

INSTRUCTIONS TUBULAR CONTROL ARMS & COIL-OVER CONVERSION FOR AMC MUSCLE CARS: 1970 AMX JAVELIN SPIRIT, HORNET, GREMLIN, CONCORD AMC TUBULAR CONTROL ARMS & COIL OVER KIT INSTRUCTIONS TUBULAR CONTROL ARMS & COIL-OVER CONVERSION FOR AMC MUSCLE CARS: 1970 AMX 1970-74 JAVELIN SPIRIT, HORNET, GREMLIN, CONCORD Revised 6/1/2012 www.freakride.com

More information

1313 LOWER TRAILING ARMS CHEVROLET B-BODY

1313 LOWER TRAILING ARMS CHEVROLET B-BODY 1313 LOWER TRAILING ARMS 59-64 CHEVROLET B-BODY Thank you for your purchase from our line of classic Chevrolet B-body suspension parts.. Please call us at (877) 4NO-ROLL if you have any questions regarding

More information